Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
AN(4)			 BSD Kernel Interfaces Manual			 AN(4)

NAME
     an	-- Aironet Communications 4500/4800 wireless network adapter driver

SYNOPSIS
     device an
     device an0	at isa?	port 0x140 irq 5

DESCRIPTION
     The an driver provides support for	Aironet	Communications 4500 and	4800
     wireless network adapters.	 This includes the ISA,	PCI and	PCMCIA vari-
     eties.  The 4500 series adapters operate at 1 and 2Mbps while the 4800
     series can	operate	at 1, 2, 5.5 and 11Mbps.  The ISA, PCI and PCMCIA de-
     vices are all based on the	same core PCMCIA modules and all have the same
     programming interface, however unlike the Lucent WaveLAN/IEEE cards, the
     ISA and PCI cards appear to the host as normal ISA	and PCI	devices	and do
     not require any PCCARD support.

     The PCMCIA	Aironet	cards require pccard support, including	the kernel pc-
     card driver support and the pccardd(8) daemon.  ISA cards can either be
     configured	to use ISA Plug	and Play or to use a particular	I/O address
     and IRQ by	properly setting the DIP switches on the board.	 (The default
     switch setting is for plug	and play.)  The	an driver has Plug and Play
     support and will work in either configuration, however when using a hard-
     wired I/O address and IRQ,	the driver configuration and the NIC's switch
     settings must agree.  PCI cards require no	switch settings	of any kind
     and will be automatically probed and attached.

     All host/device interaction with the Aironet cards	is via programmed I/O.
     The Aironet devices support 802.11	and 802.3 frames, power	management,
     BSS (infrastructure) and IBSS (ad-hoc) operation modes.  The an driver
     encapsulates all IP and ARP traffic as 802.11 frames, however it can re-
     ceive either 802.11 or 802.3 frames.  Transmit speed is selectable	be-
     tween 1Mbps, 2Mbps, 5.5Mbps, 11Mbps or "auto" (the	NIC automatically
     chooses the best speed).

     By	default, the an	driver configures the Aironet card for infrastructure
     operation.

     For more information on configuring this device, see ifconfig(8)

DIAGNOSTICS
     an%d: init	failed	The Aironet card failed	to come	ready after an ini-
     tialization command was issued.

     an%d: failed to allocate %d bytes on NIC  The driver was unable to	allo-
     cate memory for transmit frames in	the NIC's on-board RAM.

     an%d: device timeout  The Aironet card failed to generate an interrupt to
     acknowledge a transmit command.

SEE ALSO
     arp(4), netintro(4), ancontrol(8),	ifconfig(8)

HISTORY
     The an device driver first	appeared in FreeBSD 4.0.

AUTHORS
     The an driver was written by Bill Paul <wpaul@ee.columbia.edu>.

BSD			      September	10, 1999			   BSD

NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=an&sektion=4&manpath=FreeBSD+4.5-RELEASE>

home | help