Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
AMIDI(1)		    General Commands Manual		      AMIDI(1)

NAME
       amidi - read from and write to ALSA RawMIDI ports

SYNOPSIS
       amidi [-p port] [-s file	| -S data] [-r file] [-d] [-t seconds] [-a]

DESCRIPTION
       amidi  is  a  command-line utility which	allows one to receive and send
       SysEx (system exclusive)	data from/to external MIDI  devices.   It  can
       also send any other MIDI	commands.

       amidi  handles  only files containing raw MIDI commands,	without	timing
       information.  amidi does	not support Standard MIDI  (.mid)  files,  but
       aplaymidi(1) and	arecordmidi(1) do.

OPTIONS
       Use  the	 -h,  -V,  -l, or -L options to	display	information; or	use at
       least one of the	-s, -r,	-S, or -d options to specify what data to send
       or receive.

       -h, --help
	      Help: prints a list of options.

       -V, --version
	      Prints the current version.

       -l, --list-devices
	      Prints a list of all hardware MIDI ports.

       -L, --list-rawmidis
	      Prints all RawMIDI definitions.  (used when debugging configura-
	      tion files)

       -p, --port=name
	      Sets the name of the ALSA	RawMIDI	port to	use.  If this  is  not
	      specified, amidi uses the	default	port defined in	the configura-
	      tion file	(the default for this is port 0	on card	0,  which  may
	      not exist).

       -s, --send=filename
	      Sends  the contents of the specified file	to the MIDI port.  The
	      file must	contain	raw MIDI commands  (e.g.  a  .syx  file);  for
	      Standard MIDI (.mid) files, use aplaymidi(1).

       -r, --receive=filename
	      Writes data received from	the MIDI port into the specified file.
	      The file will contain raw	MIDI  commands	(such  as  in  a  .syx
	      file);  to  record  a  Standard  MIDI  (.mid) file, use arecord-
	      midi(1).

	      amidi will filter	out any	Active Sensing bytes (FEh), unless the
	      -a option	has been given.

       -S, --send-hex="..."
	      Sends  the  bytes	 specified  as hexadecimal numbers to the MIDI
	      port.

       -d, --dump
	      Prints data received from	the MIDI port  as  hexadecimal	bytes.
	      Active  Sensing bytes (FEh) will not be shown, unless the	-a op-
	      tion has been given.

	      This option is useful for	debugging.

       -t, --timeout=seconds
	      Stops receiving data when	no data	 has  been  received  for  the
	      specified	amount of time.

	      If  this	option	has  not been given, you must press Ctrl+C (or
	      kill amidi) to stop receiving data.

       -a, --active-sensing
	      Does not ignore Active Sensing bytes (FEh) when saving or	print-
	      ing received MIDI	commands.

EXAMPLES
       amidi -p	hw:0 -s	my_settings.syx
	      will send	the MIDI commands in my_settings.syx to	port hw:0.

       amidi -S	'F0 43 10 4C 00	00 7E 00 F7'
	      sends an XG Reset	to the default port.

       amidi -p	hw:1,2 -S F0411042110C000000000074F7 -r	dump.syx -t 1
	      sends  a	"Parameter Dump	Request" to a GS device, saves the re-
	      ceived parameter data to the file	dump.syx, and stops after  the
	      device has finished sending data (when no	data has been received
	      for one second).

       amidi -p	virtual	-d
	      creates a	virtual	RawMIDI	port and prints	all data sent to  this
	      port.

FILES
       /usr/local/share/alsa/alsa.conf default rawmidi definitions
       /usr/local/etc/asound.conf system-wide rawmidi definitions
       ~/.asoundrc user	specific rawmidi definitions

SEE ALSO
       aplaymidi(1)
       arecordmidi(1)

AUTHOR
       Clemens Ladisch <clemens@ladisch.de>

				  26 Jun 2006			      AMIDI(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | FILES | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=amidi&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help