Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
AMCHECKDUMP(8)		System Administration Commands		AMCHECKDUMP(8)

NAME
       amcheckdump - check the results of an Amanda dump

SYNOPSIS
       amcheckdump [--timestamp|-t timestamp] [--verbose] [-o configoption...]
		   config

DESCRIPTION
       Amcheckdump verifies Amanda dump	images by reading them from storage
       volume(s) and verifying that the	images can be parsed by	the
       appropriate application (if available). For example, a GNUTAR image is
       passed to GNU Tar for parsing, and any errors (e.g., corrupt or missing
       data) are noted.

       The application runs on the most	recent dump or,	if --timestamp is
       specified, on the most recent dump with that timestamp. Note that the
       verification is local to	the Amanda server; if the dump application is
       not available, or is configured differently on the server than on the
       client, then the	verification will most likely fail.

       If a changer is available, it is	used to	load the required tapes.
       Otherwise, the application interactively	requests the tapes.

       See the "CONFIGURATION OVERRIDE"	section	in amanda(8) for information
       on the -o option.

EXAMPLE
       # check the most	recent dump
       amcheckdump MYCONFIG

       # check a specific dump from back in '78
       amcheckdump MYCONFIG --timestamp	19780615

SEE ALSO
       amanda(8), amcheck(8)

       The Amanda Wiki:	: http://wiki.zmanda.com/

AUTHOR
       Ian Turner <ian@zmanda.com>
	   Zmanda, Inc.	(http://www.zmanda.com)

Amanda 3.3.9			  02/09/2016			AMCHECKDUMP(8)

NAME | SYNOPSIS | DESCRIPTION | EXAMPLE | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=amcheckdump&sektion=8&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help