Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
AL175(8)			  NUT Manual			      AL175(8)

NAME
       al175 - Driver for Eltek	UPS models with	AL175 alarm module

NOTE
       This man	page only documents the	hardware-specific features of the
       al175 driver. For information about the core driver, see	nutupsdrv(8).

SUPPORTED HARDWARE
       The al175 driver	is known to work with the following UPSes:

	   Eltek MPSU4000 with AL175 alarm module

       It may also work	with other UPSes equiped with AL175 alarm module, but
       they have not been tested.

       AL175 have to be	configured to operate in COMLI mode. See documentation
       supplied	with your hardware on how to do	it.

EXTRA ARGUMENTS
       This driver does	not support any	extra settings in the ups.conf(5).

INSTANT	COMMANDS
       This driver supports some extra commands	(see upscmd(8)):

       test.battery.start
	   Start a battery test.

       test.battery.stop
	   Stop	a battery test.

VARIABLES
       Besides status, this driver reads UPS state into	following variables:

       o   ups.test.result

       o   output.voltage.nominal

       o   output.current

       o   battery.voltage.nominal

       o   battery.current

       o   battery.temperature

       o   input.transfer.boost.low

KNOWN ISSUES AND BUGS
       o   Shutdown is not supported. FIXME

       o   The driver was reworked to meet the project code quality criteria,
	   without testing on real hardware. Some bugs may have	crept in.

AUTHOR
       Kirill Smelkov <kirr@mns.spb.ru>

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network	UPS Tools) home	page: http://www.networkupstools.org/

Network	UPS Tools 2.7.3.	  12/29/2015			      AL175(8)

NAME | NOTE | SUPPORTED HARDWARE | EXTRA ARGUMENTS | INSTANT COMMANDS | VARIABLES | KNOWN ISSUES AND BUGS | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=al175&sektion=8&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help