Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
AHA(4)                 FreeBSD Kernel Interfaces Manual                 AHA(4)

     aha - Adaptec SCSI host adapter driver

     device aha0 at isa? port ? irq ? drq 5
     device scbus0 at aha0

     This driver provides access to the SCSI bus connected to an Adaptec
     154xA, 154xB, 154xC, 154xCF, or 154xCP host adapter.  Host adapters
     supporting a 154X compatible interface, such as some Tekram controllers
     and the Adaptec 174x in 154x emulation mode can, also be attached with
     this driver.  For optimum performance, Adaptec 174x controllers should be
     configured in enhanced mode and attached via the ahb(4) driver.

     One kernel config entry for every card to be attached by the system is
     required.  Specific values for the port address, irq, and drq may be
     specified.  If wildcard values are used, the driver will query the device
     for its current settings and use those.  If the port address is a
     wildcard, the driver consults an internal table of possible port address
     locations and attaches to the first unattached card it finds.  The
     possible port addresses for this card are 0x330, 0x334, 0x230, 0x234,
     0x130, and 0x134.

     ahb(4), ahc(4), cd(4), da(4), sa(4), scsi(4)

     The aha driver was ported by M. Warner Losh from the bt driver written by
     Justin T. Gibbs.

FreeBSD 11.0-PRERELEASE        October 15, 1998        FreeBSD 11.0-PRERELEASE


Want to link to this manual page? Use this URL:

home | help