Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
aegis -Integrate_Fail(1)    General Commands Manual   aegis -Integrate_Fail(1)

NAME
	aegis integrate	fail - fail a change integration

SYNOPSIS
	aegis -Integrate_Fail -File reason-file	[ option...  ]
	aegis -Integrate_Fail -REASon 'reason-text' [ option...	 ]
	aegis -Integrate_Fail -Edit [ option...	 ]
	aegis -Integrate_Fail -List [ option...	 ]
	aegis -Integrate_Fail -Help

DESCRIPTION
	The aegis -Integrate_Fail command is used to inform aegis that a
	change has failed integration.

	The change will	be returned from the being integrated state to the be-
	ing developed state.  The change will cease to be assigned to the cur-
	rent user, and will be reassigned to the originating developer.	 The
	integration directory will be deleted.	boxwid = 1 down	S2: box	"be-
	ing" "developed" arrow " develop" ljust	" end" ljust box "awaiting"
	"review" arrow " review" ljust " begin"	ljust box "being" "reviewed"
	arrow "	review"	ljust "	pass" ljust box	"awaiting" "integration" arrow
	" integrate" ljust " begin" ljust S5: box "being" "integrated"

	move to	S5.e T7: spline	-> right 0.5 then up 4 then to S2.e "integrate
	" rjust	"fail "	rjust at T7.c +	(0.5,0)

	The reviewer and the developer will be notified	by mail.  See the in-
	tegrate_fail_notify_command in aepconf(5) for more information.

	The reason-file	will contain a description of why the change was
	failed.	 The file is in	plain text.  It	is recommended that you	only
	use newline to terminate paragraphs, (rather than to terminate lines)
	as with	will result in better formatting in the	various	listings.

   Notification
	On successful completion of this command, the integrate_fail_notify_-
	command	field of the project attributes	is run,	if set.	 See
	aepattr(5) and aepa(1) for more	information.

OPTIONS
	The following options are understood:

	-Change	number
		This option may	be used	to specify a particular	change within
		a project.  See	aegis(1) for a complete	description of this
		option.

	-Edit
		Edit the attributes with a text	editor,	this is	usually	more
		convenient than	supplying a text file.	The VISUAL and then
		EDITOR environment variables are consulted for the name	of the
		editor to use; defaults	to vi(1) if neither is set.  See the
		visual_command and editor_command fields in aeuconf(1) for how
		to override this specifically for Aegis.

		Warning: Aegis tries to	be well	behaved	when faced with	er-
		rors, so the temporary file is left in your home directory
		where you can edit it further and re-use it with a -file op-
		tion.

		The -edit option may not be used in the	background, or when
		the standard input is not a terminal.

	-Edit_BackGround
		Edit the attributes with a dumb	text editor, this is most of-
		ten desired when edit commands are being piped into the	editor
		via the	standard input.	 Only the EDITOR environment variable
		is consulted for the name of the editor	to use;	it is a	fatal
		error if it is not set.	 See the editor_command	field in aeu-
		conf(1)	for how	to override this specifically for Aegis.

	-File filename
		Take the attributes from the specified file.  The filename `-'
		is understood to mean the standard input.

	-Help
		This option may	be used	to obtain more information about how
		to use the aegis program.

	-Keep
		This option may	be used	to retain files	and/or directories
		usually	deleted	or replaced by the command.  Defaults to the
		user's delete_file_preference if not specified,	see aeuconf(5)
		for more information.

	-No_Keep
		This option may	be used	to ensure that the files and/or	direc-
		tories are deleted or replaced by the command.	Defaults to
		the user's delete_file_preference if not specified, see	aeu-
		conf(5)	for more information.

	-List
		This option may	be used	to obtain a list of suitable subjects
		for this command.  The list may	be more	general	than expected.

	-Project name
		This option may	be used	to select the project of interest.
		When no	-Project option	is specified, the AEGIS_PROJECT	envi-
		ronment	variable is consulted.	If that	does not exist,	the
		user's $HOME/.aegisrc file is examined for a default project
		field (see aeuconf(5) for more information).  If that does not
		exist, when the	user is	only working on	changes	within a sin-
		gle project, the project name defaults to that project.	 Oth-
		erwise,	it is an error.

	-REAson	text
		This option may	be used	to provide the failure reason on the
		command	line, rather than in a file.  You will need to use
		quotes to insulate the spaces from the shell.

	-TERse
		This option may	be used	to cause listings to produce the bare
		minimum	of information.	 It is usually useful for shell
		scripts.

	-Verbose
		This option may	be used	to cause aegis to produce more output.
		By default aegis only produces output on errors.  When used
		with the -List option this option causes column	headings to be
		added.

	-Wait	This option may	be used	to require Aegis commands to wait for
		access locks, if they cannot be	obtained immediately.  De-
		faults to the user's lock_wait_preference if not specified,
		see aeuconf(5) for more	information.

	-No_Wait
		This option may	be used	to require Aegis commands to emit a
		fatal error if access locks cannot be obtained immediately.
		Defaults to the	user's lock_wait_preference if not specified,
		see aeuconf(5) for more	information.

	See also aegis(1) for options common to	all aegis commands.

	All options may	be abbreviated;	the abbreviation is documented as the
	upper case letters, all	lower case letters and underscores (_) are op-
	tional.	 You must use consecutive sequences of optional	letters.

	All options are	case insensitive, you may type them in upper case or
	lower case or a	combination of both, case is not important.

	For example: the arguments "-project", "-PROJ" and "-p"	are all	inter-
	preted to mean the -Project option.  The argument "-prj" will not be
	understood, because consecutive	optional characters were not supplied.

	Options	and other command line arguments may be	mixed arbitrarily on
	the command line, after	the function selectors.

	The GNU	long option names are understood.  Since all option names for
	aegis are long,	this means ignoring the	extra leading '-'.  The	"--op-
	tion=value" convention is also understood.

RECOMMENDED ALIAS
	The recommended	alias for this command is
	csh%	alias aeifail 'aegis -ifail \!*	-v'
	sh$	aeifail(){aegis	-ifail "$@" -v}

ERRORS
	It is an error if the change is	not in the being integrated state.
	It is an error if the change is	not assigned to	the current user.

EXIT STATUS
	The aegis command will exit with a status of 1 on any error.  The
	aegis command will only	exit with a status of 0	if there are no	er-
	rors.

ENVIRONMENT VARIABLES
	See aegis(1) for a list	of environment variables which may affect this
	command.  See aepconf(5) for the project configuration file's
	project_specific field for how to set environment variables for	all
	commands executed by Aegis.

SEE ALSO
	aeib(1)	begin integration of a change

	aeipass(1)
		pass integration of a change

	aeuconf(5)
		user configuration file	format

COPYRIGHT
	aegis version 4.25.D510
	Copyright (C) 1991, 1992, 1993,	1994, 1995, 1996, 1997,	1998, 1999,
	2000, 2001, 2002, 2003,	2004, 2005, 2006, 2007,	2008, 2009, 2010,
	2011, 2012 Peter Miller

	The aegis program comes	with ABSOLUTELY	NO WARRANTY; for details use
	the 'aegis -VERSion License' command.  This is free software and you
	are welcome to redistribute it under certain conditions; for details
	use the	'aegis -VERSion	License' command.

AUTHOR
	Peter Miller   E-Mail:	 pmiller@opensource.org.au
	/\/\*		  WWW:	 http://miller.emu.id.au/pmiller/

Reference Manual		     Aegis	      aegis -Integrate_Fail(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | RECOMMENDED ALIAS | ERRORS | EXIT STATUS | ENVIRONMENT VARIABLES | SEE ALSO | COPYRIGHT | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=aeifail&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help