Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
aegis -Integrate_Begin_Undo(General Commands Manaegis -Integrate_Begin_Undo(1)

NAME
	aegis integrate	begin undo - reverse the aeib command

SYNOPSIS
	aegis -Integrate_Begin_Undo [ option...	 ]
	aegis -Integrate_Begin_Undo -List [ option...  ]
	aegis -Integrate_Begin_Undo -Help

DESCRIPTION
	The aegis -Integrate_Begin_Undo	command	is used	to reverse the actions
	of the 'aegis -Integrate_Begin'	command.

	Successful execution of	this command will move the change from the be-
	ing integrated state to	the awaiting integration state.	 The integra-
	tion directory will be deleted.	 The change will cease to be assigned
	to the current user.  boxwid = 1 down S4: box "awaiting" "integration"
	arrow "	integrate" ljust " begin" ljust	S5: box	"being"	"integrated"
	move to	S5.w T4: spline	-> left	0.5 then up 1 then to S4.w " inte-
	grate" ljust " begin" ljust " undo" ljust at T4.c - (0.5,0)

	In the unlikely	event that an integrator has wandered away and left an
	integration incomplete (say, went on holidays and won't	be back	for
	two weeks), project administrators are also able to use	this command.

   Notification
	On successful completion of this command, the integration_begin_undo_-
	command	field of the project config file is run, if set.  See aep-
	conf(5)	for more information.

OPTIONS
	The following options are understood:

	-Change	number
		This option may	be used	to specify a particular	change within
		a project.  See	aegis(1) for a complete	description of this
		option.

	-Help
		This option may	be used	to obtain more information about how
		to use the aegis program.

	-Keep
		This option may	be used	to retain files	and/or directories
		usually	deleted	or replaced by the command.  Defaults to the
		user's delete_file_preference if not specified,	see aeuconf(5)
		for more information.

	-No_Keep
		This option may	be used	to ensure that the files and/or	direc-
		tories are deleted or replaced by the command.	Defaults to
		the user's delete_file_preference if not specified, see	aeu-
		conf(5)	for more information.

	-List
		This option may	be used	to obtain a list of suitable subjects
		for this command.  The list may	be more	general	than expected.

	-Project name
		This option may	be used	to select the project of interest.
		When no	-Project option	is specified, the AEGIS_PROJECT	envi-
		ronment	variable is consulted.	If that	does not exist,	the
		user's $HOME/.aegisrc file is examined for a default project
		field (see aeuconf(5) for more information).  If that does not
		exist, when the	user is	only working on	changes	within a sin-
		gle project, the project name defaults to that project.	 Oth-
		erwise,	it is an error.

	-REAson	text
		This option may	be used	to attach a comment to the change his-
		tory generated by this command.	 You will need to use quotes
		to insulate the	spaces from the	shell.

	-TERse
		This option may	be used	to cause listings to produce the bare
		minimum	of information.	 It is usually useful for shell
		scripts.

	-Verbose
		This option may	be used	to cause aegis to produce more output.
		By default aegis only produces output on errors.  When used
		with the -List option this option causes column	headings to be
		added.

	-Wait	This option may	be used	to require Aegis commands to wait for
		access locks, if they cannot be	obtained immediately.  De-
		faults to the user's lock_wait_preference if not specified,
		see aeuconf(5) for more	information.

	-No_Wait
		This option may	be used	to require Aegis commands to emit a
		fatal error if access locks cannot be obtained immediately.
		Defaults to the	user's lock_wait_preference if not specified,
		see aeuconf(5) for more	information.

	See also aegis(1) for options common to	all aegis commands.

	All options may	be abbreviated;	the abbreviation is documented as the
	upper case letters, all	lower case letters and underscores (_) are op-
	tional.	 You must use consecutive sequences of optional	letters.

	All options are	case insensitive, you may type them in upper case or
	lower case or a	combination of both, case is not important.

	For example: the arguments "-project", "-PROJ" and "-p"	are all	inter-
	preted to mean the -Project option.  The argument "-prj" will not be
	understood, because consecutive	optional characters were not supplied.

	Options	and other command line arguments may be	mixed arbitrarily on
	the command line, after	the function selectors.

	The GNU	long option names are understood.  Since all option names for
	aegis are long,	this means ignoring the	extra leading '-'.  The	"--op-
	tion=value" convention is also understood.

RECOMMENDED ALIAS
	The recommended	alias for this command is
	csh%	alias aeibu 'aegis -ibu	\!* -v'
	sh$	aeibu(){aegis -ibu "$@"	-v}

ERRORS
	It is an error if the change is	not in the being_integrated state.
	It is an error if the change is	not assigned to	the current user and
	the current user is not	a project administrator.

EXIT STATUS
	The aegis command will exit with a status of 1 on any error.  The
	aegis command will only	exit with a status of 0	if there are no	er-
	rors.

ENVIRONMENT VARIABLES
	See aegis(1) for a list	of environment variables which may affect this
	command.  See aepconf(5) for the project configuration file's
	project_specific field for how to set environment variables for	all
	commands executed by Aegis.

SEE ALSO
	aeib(1)	begin integration of a change

	aeuconf(5)
		user configuration file	format

COPYRIGHT
	aegis version 4.25.D510
	Copyright (C) 1991, 1992, 1993,	1994, 1995, 1996, 1997,	1998, 1999,
	2000, 2001, 2002, 2003,	2004, 2005, 2006, 2007,	2008, 2009, 2010,
	2011, 2012 Peter Miller

	The aegis program comes	with ABSOLUTELY	NO WARRANTY; for details use
	the 'aegis -VERSion License' command.  This is free software and you
	are welcome to redistribute it under certain conditions; for details
	use the	'aegis -VERSion	License' command.

AUTHOR
	Peter Miller   E-Mail:	 pmiller@opensource.org.au
	/\/\*		  WWW:	 http://miller.emu.id.au/pmiller/

Reference Manual		     Aegis	aegis -Integrate_Begin_Undo(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | RECOMMENDED ALIAS | ERRORS | EXIT STATUS | ENVIRONMENT VARIABLES | SEE ALSO | COPYRIGHT | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=aeibu&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help