Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ae-repo-ci(1)							 ae-repo-ci(1)

NAME
	ae-repo-ci - redundant repository checkin

SYNOPSIS
	ae-repo-ci -Project name -Change number	-REPOsitory type [ option...
	]
	ae-repo-ci -Help
	ae-repo-ci -VERSion

DESCRIPTION
	The ae-repo-ci command is used to redundantly commit an	Aegis change
	set into a parallel repository.

   Integrate Pass Notify Command
	The intended use for the ae-repo-ci command is as an integrate_pass_-
	notify_command (see aepa(1) for	more information) to do	a redundant
	checkin	of a change set	into a second parallel repository.

	For example, if	you were using CVS, the	project	attribute would	look
	something like this:
		integrate_pass_notify_command =
		    "$bin/ae-repo-ci -repo cvs "
		    " -p $project -c $change";
	You may	also need to specify the module, if the	module name is not the
	same as	the project name.

   Commit Messages
	You are	able to	control	the commit message, by using the ae-repo-
	ci:commit-message attribute in the project_specific field of the
	project	configuration file.

	The default is as if the following entry were present:
		project_specific = [
		    {
			name = "ae-repo-ci:commit-message";
			value =	"$version - ${change brief_description}";
		    } ];
	All of the aesub(5) substitutions are available.

OPTIONS
	The following options are understood:

	-Change	number
		This option may	be used	to specify a particular	change within
		a project.  See	aegis(1) for a complete	description of this
		option.

	-DIRectory path
		This option may	be used	to specify which directory is to be
		used.  It is an	error if the current user does not have	appro-
		priate permissions to create the directory path	given.	This
		must be	an absolute path.

		Caution: If you	are using an automounter do not	use `pwd` to
		make an	absolute path, it usually gives	the wrong answer.

	-Help
		This option may	be used	to obtain more information about how
		to use the ae-repo-ci program.

	-List	This option may	be used	to obtain a list of supported reposi-
		tory types.

	-MODule	name
		This option may	be used	to specify which module	is to be
		checked	out.  If not set, it defaults to the trunk project
		name (i.e. the project name without any	branch or version num-
		bers).

	-Project name
		This option may	be used	to select the project of interest.
		When no	-Project option	is specified, the AEGIS_PROJECT	envi-
		ronment	variable is consulted.	If that	does not exist,	the
		user's $HOME/.aegisrc file is examined for a default project
		field (see aeuconf(5) for more information).  If that does not
		exist, when the	user is	only working on	changes	within a sin-
		gle project, the project name defaults to that project.	 Oth-
		erwise,	it is an error.

	-REPOsitory type
		This option is used to specify the repository type for the
		checkin.  Known	repository types are:

		cvs	Concurrent version System.  You	will need to set the
			CVSROOT	environment variable appropriately, and	the
			-module	option will be relative	to it.

		svn
			Subversion.  You must specify the complete URL with
			the -module option.

			The following field in the project_specific field of
			the project configuration file (see aepconf(5) for
			more information) are relevant:

			svn:username
				If present, the	-username command line option
				will be	added to svn(1)	command	lines, with
				this value.

			svn:password 8n
				If present, the	-username command line option
				will be	added to svn(1)	command	lines, with
				this value.

			These options can help when you	can't convince Subver-
			sion to	use the	correct	authorization any other	way.

		This option must be specified, there is	no default.  The -list
		option may be used to obtain an	up-to-date list	of supported
		repository types.

	See also aegis(1) for options common to	all aegis commands.

	All options may	be abbreviated;	the abbreviation is documented as the
	upper case letters, all	lower case letters and underscores (_) are op-
	tional.	 You must use consecutive sequences of optional	letters.

	All options are	case insensitive, you may type them in upper case or
	lower case or a	combination of both, case is not important.

	For example: the arguments "-project", "-PROJ" and "-p"	are all	inter-
	preted to mean the -Project option.  The argument "-prj" will not be
	understood, because consecutive	optional characters were not supplied.

	Options	and other command line arguments may be	mixed arbitrarily on
	the command line, after	the function selectors.

	The GNU	long option names are understood.  Since all option names for
	ae-repo-ci are long, this means	ignoring the extra leading '-'.	 The
	"--option=value" convention is also understood.

EXIT STATUS
	The ae-repo-ci command will exit with a	status of 1 on any error.  The
	ae-repo-ci command will	only exit with a status	of 0 if	there are no
	errors.

ENVIRONMENT VARIABLES
	See aegis(1) for a list	of environment variables which may affect this
	command.  See aepconf(5) for the project configuration file's
	project_specific field for how to set environment variables for	all
	commands executed by Aegis.

SEE ALSO
	aeca(1)	how to change project attributes

COPYRIGHT
	ae-repo-ci version 4.25.D510
	Copyright (C) 1991, 1992, 1993,	1994, 1995, 1996, 1997,	1998, 1999,
	2000, 2001, 2002, 2003,	2004, 2005, 2006, 2007,	2008, 2009, 2010,
	2011, 2012 Peter Miller

	The ae-repo-ci program comes with ABSOLUTELY NO	WARRANTY; for details
	use the	'ae-repo-ci -VERSion License' command.	This is	free software
	and you	are welcome to redistribute it under certain conditions; for
	details	use the	'ae-repo-ci -VERSion License' command.

AUTHOR
	Peter Miller   E-Mail:	 pmiller@opensource.org.au
	/\/\*		  WWW:	 http://miller.emu.id.au/pmiller/

Reference Manual		     Aegis			 ae-repo-ci(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT STATUS | ENVIRONMENT VARIABLES | SEE ALSO | COPYRIGHT | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ae-repo-ci&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help