Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
Tcl_GetEncoding(3)	    Tcl	Library	Procedures	    Tcl_GetEncoding(3)

______________________________________________________________________________

NAME
       Tcl_GetEncoding,	  Tcl_FreeEncoding,   Tcl_GetEncodingFromObj,  Tcl_Ex-
       ternalToUtfDString,    Tcl_ExternalToUtf,     Tcl_UtfToExternalDString,
       Tcl_UtfToExternal,  Tcl_GetEncodingName,	Tcl_SetSystemEncoding, Tcl_Ge-
       tEncodingNameFromEnvironment, Tcl_GetEncodingNames, Tcl_CreateEncoding,
       Tcl_GetEncodingSearchPath,  Tcl_SetEncodingSearchPath,  Tcl_GetDefault-
       EncodingDir, Tcl_SetDefaultEncodingDir -	procedures  for	 creating  and
       using encodings

SYNOPSIS
       #include	<tcl.h>

       Tcl_Encoding
       Tcl_GetEncoding(interp, name)

       void
       Tcl_FreeEncoding(encoding)

       int
       Tcl_GetEncodingFromObj(interp, objPtr, encodingPtr)

       char *
       Tcl_ExternalToUtfDString(encoding, src, srcLen, dstPtr)

       char *
       Tcl_UtfToExternalDString(encoding, src, srcLen, dstPtr)

       int
       Tcl_ExternalToUtf(interp, encoding, src,	srcLen,	flags, statePtr,
			 dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr)

       int
       Tcl_UtfToExternal(interp, encoding, src,	srcLen,	flags, statePtr,
			 dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr)

       char *
       Tcl_WinTCharToUtf(tsrc, srcLen, dstPtr)

       TCHAR *
       Tcl_WinUtfToTChar(src, srcLen, dstPtr)

       const char *
       Tcl_GetEncodingName(encoding)

       int
       Tcl_SetSystemEncoding(interp, name)

       const char *
       Tcl_GetEncodingNameFromEnvironment(bufPtr)

       void
       Tcl_GetEncodingNames(interp)

       Tcl_Encoding
       Tcl_CreateEncoding(typePtr)

       Tcl_Obj *
       Tcl_GetEncodingSearchPath()

       int
       Tcl_SetEncodingSearchPath(searchPath)

       const char *
       Tcl_GetDefaultEncodingDir(void)

       void
       Tcl_SetDefaultEncodingDir(path)

ARGUMENTS
       Tcl_Interp *interp (in)				 Interpreter   to  use
							 for error  reporting,
							 or  NULL  if no error
							 reporting is desired.

       const char *name	(in)				 Name of  encoding  to
							 load.

       Tcl_Encoding encoding (in)			 The	encoding    to
							 query,	free,  or  use
							 for  converting text.
							 If encoding is	 NULL,
							 the   current	system
							 encoding is used.

       Tcl_Obj *objPtr (in)				 Name of  encoding  to
							 get token for.

       Tcl_Encoding *encodingPtr (out)			 Points	  to   storage
							 where encoding	 token
							 is to be written.

       const char *src (in)				 For	the    Tcl_Ex-
							 ternalToUtf	 func-
							 tions,	 an  array  of
							 bytes in  the	speci-
							 fied	encoding  that
							 are to	 be  converted
							 to  UTF-8.   For  the
							 Tcl_UtfToExternal and
							 Tcl_WinUtfToTChar
							 functions,  an	 array
							 of  UTF-8  characters
							 to  be	 converted  to
							 the  specified	encod-
							 ing.

       const TCHAR *tsrc (in)				 An array  of  Windows
							 TCHAR	characters  to
							 convert to UTF-8.

       int srcLen (in)					 Length	of src or tsrc
							 in   bytes.   If  the
							 length	 is  negative,
							 the encoding-specific
							 length	of the	string
							 is used.

       Tcl_DString *dstPtr (out)			 Pointer  to an	unini-
							 tialized   or	  free
							 Tcl_DString  in which
							 the converted	result
							 will be stored.

       int flags (in)					 Various flag bits OR-
							 ed together.  TCL_EN-
							 CODING_START	signi-
							 fies that the	source
							 buffer	 is  the first
							 block	in  a  (poten-
							 tially	  multi-block)
							 input stream, telling
							 the  conversion  rou-
							 tine to reset	to  an
							 initial   state   and
							 perform any  initial-
							 ization that needs to
							 occur	 before	   the
							 first	byte  is  con-
							 verted.    TCL_ENCOD-
							 ING_END     signifies
							 that the source  buf-
							 fer is	the last block
							 in   a	  (potentially
							 multi-block)	 input
							 stream,  telling  the
							 conversion routine to
							 perform any finaliza-
							 tion  that  needs  to
							 occur after the  last
							 byte is converted and
							 then to reset	to  an
							 initial	state.
							 TCL_ENCODING_STOPON-
							 ERROR	signifies that
							 the  conversion  rou-
							 tine	should	return
							 immediately	  upon
							 reading    a	source
							 character  that  does
							 not exist in the tar-
							 get encoding;	other-
							 wise  a default fall-
							 back  character  will
							 automatically be sub-
							 stituted.

       Tcl_EncodingState *statePtr (in/out)		 Used when  converting
							 a  (generally long or
							 indefinite    length)
							 byte	stream	 in  a
							 piece-by-piece	 fash-
							 ion.	The conversion
							 routine  stores   its
							 current    state   in
							 *statePtr  after  src
							 (the  buffer contain-
							 ing	the    current
							 piece)	 has been con-
							 verted;  that	 state
							 information  must  be
							 passed	back when con-
							 verting    the	  next
							 piece of  the	stream
							 so   the   conversion
							 routine  knows	  what
							 state	it was in when
							 it left  off  at  the
							 end   of   the	  last
							 piece.	 May be	 NULL,
							 in   which  case  the
							 value	specified  for
							 flags	is ignored and
							 the source buffer  is
							 assumed   to  contain
							 the  complete	string
							 to convert.

       char *dst (out)					 Buffer	 in  which the
							 converted result will
							 be  stored.   No more
							 than	dstLen	 bytes
							 will	be  stored  in
							 dst.

       int dstLen (in)					 The maximum length of
							 the output buffer dst
							 in bytes.

       int *srcReadPtr (out)				 Filled	with the  num-
							 ber of	bytes from src
							 that  were   actually
							 converted.   This may
							 be  less   than   the
							 original	source
							 length	if there was a
							 problem    converting
							 some  source  charac-
							 ters.	May be NULL.

       int *dstWrotePtr	(out)				 Filled	 with the num-
							 ber  of  bytes	  that
							 were  actually	stored
							 in the	output	buffer
							 as  a	result	of the
							 conversion.   May  be
							 NULL.

       int *dstCharsPtr	(out)				 Filled	 with the num-
							 ber   of   characters
							 that	correspond  to
							 the number  of	 bytes
							 stored	 in the	output
							 buffer.  May be NULL.

       Tcl_DString *bufPtr (out)			 Storage for the  pre-
							 scribed system	encod-
							 ing name.

       const Tcl_EncodingType *typePtr (in)		 Structure  that   de-
							 fines	a  new type of
							 encoding.

       Tcl_Obj *searchPath (in)				 List  of   filesystem
							 directories  in which
							 to search for	encod-
							 ing data files.

       const char *path	(in)				 A  path  to the loca-
							 tion of the  encoding
							 file.
______________________________________________________________________________

INTRODUCTION
       These routines convert between Tcl's internal character representation,
       UTF-8, and character representations used by various operating  systems
       or  file	systems, such as Unicode, ASCII, or Shift-JIS.	When operating
       on strings, such	as such	as obtaining the names of files	or  displaying
       characters  using  international	 fonts,	the strings must be translated
       into one	or possibly multiple formats that the various system calls can
       use.  For instance, on a	Japanese Unix workstation, a user might	obtain
       a filename represented in the EUC-JP file encoding and  then  translate
       the  characters	to  the	jisx0208 font encoding in order	to display the
       filename	in a Tk	widget.	 The purpose of	the  encoding  package	is  to
       help  bridge the	translation gap.  UTF-8	provides an intermediate stag-
       ing ground for all the various encodings.  In the example  above,  text
       would  be translated into UTF-8 from whatever file encoding the operat-
       ing system is using.  Then it would be translated from UTF-8 into what-
       ever font encoding the display routines require.

       Some  basic  encodings are compiled into	Tcl.  Others can be defined by
       the user	or dynamically loaded from encoding files in a	platform-inde-
       pendent manner.

DESCRIPTION
       Tcl_GetEncoding	finds  an encoding given its name.  The	name may refer
       to a built-in Tcl encoding, a user-defined encoding registered by call-
       ing  Tcl_CreateEncoding,	 or a dynamically-loadable encoding file.  The
       return value is a token that represents the encoding and	can be used in
       subsequent calls	to procedures such as Tcl_GetEncodingName, Tcl_FreeEn-
       coding, and Tcl_UtfToExternal.  If the name did not refer to any	 known
       or loadable encoding, NULL is returned and an error message is returned
       in interp.

       The encoding package maintains a	database of all	encodings currently in
       use.   The first	time name is seen, Tcl_GetEncoding returns an encoding
       with a reference	count of 1.  If	the same  name	is  requested  further
       times,  then the	reference count	for that encoding is incremented with-
       out the overhead	of allocating a	new encoding and  all  its  associated
       data structures.

       When an encoding	is no longer needed, Tcl_FreeEncoding should be	called
       to release it.  When an encoding	is no longer in	use anywhere (i.e., it
       has  been  freed	 as many times as it has been gotten) Tcl_FreeEncoding
       will release all	storage	the encoding was using and delete it from  the
       database.

       Tcl_GetEncodingFromObj treats the string	representation of objPtr as an
       encoding	name, and finds	an encoding with that name, just as Tcl_GetEn-
       coding  does. When an encoding is found,	it is cached within the	objPtr
       value for future	reference, the Tcl_Encoding token is  written  to  the
       storage pointed to by encodingPtr, and the value	TCL_OK is returned. If
       no such encoding	is found, the value  TCL_ERROR	is  returned,  and  no
       writing	to *encodingPtr	takes place. Just as with Tcl_GetEncoding, the
       caller should call Tcl_FreeEncoding on  the  resulting  encoding	 token
       when that token will no longer be used.

       Tcl_ExternalToUtfDString	 converts  a source buffer src from the	speci-
       fied encoding into UTF-8.  The converted	bytes are  stored  in  dstPtr,
       which  is  then	null-terminated.   The	caller	should eventually call
       Tcl_DStringFree to free any information stored in  dstPtr.   When  con-
       verting,	if any of the characters in the	source buffer cannot be	repre-
       sented in the target encoding, a	default	 fallback  character  will  be
       used.   The  return  value  is  a  pointer  to  the value stored	in the
       DString.

       Tcl_ExternalToUtf converts a source buffer src from the	specified  en-
       coding  into  UTF-8.   Up to srcLen bytes are converted from the	source
       buffer and up to	dstLen converted bytes are  stored  in	dst.   In  all
       cases,  *srcReadPtr  is	filled with the	number of bytes	that were suc-
       cessfully converted from	src and	*dstWrotePtr is	filled with the	corre-
       sponding	 number	of bytes that were stored in dst.  The return value is
       one of the following:

	      TCL_OK			   All bytes of	src were converted.

	      TCL_CONVERT_NOSPACE	   The	destination  buffer  was   not
					   large  enough  for  all of the con-
					   verted data;	as many	characters  as
					   could fit were converted though.

	      TCL_CONVERT_MULTIBYTE	   The	last  few  bytes in the	source
					   buffer  were	 the  beginning	 of  a
					   multibyte  sequence,	but more bytes
					   were	needed to  complete  this  se-
					   quence.   A	subsequent call	to the
					   conversion routine  should  pass  a
					   buffer  containing  the unconverted
					   bytes that  remained	 in  src  plus
					   some	 further bytes from the	source
					   stream to properly convert the for-
					   merly split-up multibyte sequence.

	      TCL_CONVERT_SYNTAX	   The	source buffer contained	an in-
					   valid character sequence.  This may
					   occur  if the input stream has been
					   damaged or if  the  input  encoding
					   method was misidentified.

	      TCL_CONVERT_UNKNOWN	   The source buffer contained a char-
					   acter that could not	be represented
					   in  the target encoding and TCL_EN-
					   CODING_STOPONERROR was specified.

       Tcl_UtfToExternalDString	converts a source buffer src from  UTF-8  into
       the  specified  encoding.   The	converted  bytes are stored in dstPtr,
       which is	then terminated	with the appropriate  encoding-specific	 null.
       The  caller should eventually call Tcl_DStringFree to free any informa-
       tion stored in dstPtr.  When converting,	if any of  the	characters  in
       the  source  buffer cannot be represented in the	target encoding, a de-
       fault fallback character	will be	used.  The return value	is  a  pointer
       to the value stored in the DString.

       Tcl_UtfToExternal  converts  a  source  buffer  src from	UTF-8 into the
       specified encoding.  Up to srcLen bytes are converted from  the	source
       buffer  and  up	to  dstLen  converted bytes are	stored in dst.	In all
       cases, *srcReadPtr is filled with the number of bytes  that  were  suc-
       cessfully converted from	src and	*dstWrotePtr is	filled with the	corre-
       sponding	number of bytes	that were stored in dst.   The	return	values
       are the same as the return values for Tcl_ExternalToUtf.

       Tcl_WinUtfToTChar  and  Tcl_WinTCharToUtf  are Windows-only convenience
       functions for converting	between	UTF-8 and Windows strings based	on the
       TCHAR  type  which  is by convention a Unicode character	on Windows NT.
       Those functions are deprecated. You can use Tcl_UtfToWCharDString resp.
       Tcl_WCharToUtfDString  as  replacement.	If you want compatibility with
       earlier	Tcl  releases  than  8.7,  use	Tcl_UtfToUniCharDString	 resp.
       Tcl_UniCharToUtfDString	as replacement,	and make sure you compile your
       extension with -DTCL_UTF_MAX=3.	Beware:	 Those	replacement  functions
       don't  initialize  their	Tcl_DString (you'll have to do that yourself),
       and Tcl_UniCharToUtfDString from	Tcl 8.6	doesn't	accept	-1  as	length
       parameter.

       Tcl_GetEncodingName  is	roughly	the inverse of Tcl_GetEncoding.	 Given
       an encoding, the	return value is	the name argument  that	 was  used  to
       create  the  encoding.	The  string returned by	Tcl_GetEncodingName is
       only guaranteed to persist until	the encoding is	deleted.   The	caller
       must not	modify this string.

       Tcl_SetSystemEncoding  sets  the	 default  encoding that	should be used
       whenever	the user passes	a NULL value for the encoding argument to  any
       of  the other encoding functions.  If name is NULL, the system encoding
       is reset	to the default system encoding,	binary.	 If the	name  did  not
       refer  to  any known or loadable	encoding, TCL_ERROR is returned	and an
       error message is	left in	interp.	 Otherwise, this procedure  increments
       the  reference  count of	the new	system encoding, decrements the	refer-
       ence count of the old system encoding, and returns TCL_OK.

       Tcl_GetEncodingNameFromEnvironment provides a means for the Tcl library
       to report the encoding name it believes to be the correct one to	use as
       the system encoding, based on system calls and examination of the envi-
       ronment	suitable for the platform.  It accepts bufPtr, a pointer to an
       uninitialized or	freed Tcl_DString and writes the encoding name to  it.
       The Tcl_DStringValue is returned.

       Tcl_GetEncodingNames sets the interp result to a	list consisting	of the
       names of	all the	encodings that are currently defined or	can be dynami-
       cally  loaded, searching	the encoding path specified by Tcl_SetDefault-
       EncodingDir.  This procedure does not ensure that the dynamically-load-
       able encoding files contain valid data, but merely that they exist.

       Tcl_CreateEncoding  defines  a  new encoding and	registers the C	proce-
       dures that are called back to convert between the encoding  and	UTF-8.
       Encodings  created  by Tcl_CreateEncoding are thereafter	visible	in the
       database	used by	Tcl_GetEncoding.  Just	as  with  the  Tcl_GetEncoding
       procedure, the return value is a	token that represents the encoding and
       can be used in subsequent calls to other	encoding functions.   Tcl_Cre-
       ateEncoding  returns an encoding	with a reference count of 1. If	an en-
       coding with the specified name already exists, then its	entry  in  the
       database	 is  replaced with the new encoding; the token for the old en-
       coding will remain valid	and continue to	behave as before, but users of
       the new token will now call the new encoding procedures.

       The  typePtr  argument to Tcl_CreateEncoding contains information about
       the name	of the encoding	and the	procedures that	will be	called to con-
       vert between this encoding and UTF-8.  It is defined as follows:

	      typedef struct Tcl_EncodingType {
		  const	char *encodingName;
		  Tcl_EncodingConvertProc *toUtfProc;
		  Tcl_EncodingConvertProc *fromUtfProc;
		  Tcl_EncodingFreeProc *freeProc;
		  ClientData clientData;
		  int nullSize;
	      }	Tcl_EncodingType;

       The  encodingName  provides a string name for the encoding, by which it
       can be referred in  other  procedures  such  as	Tcl_GetEncoding.   The
       toUtfProc refers	to a callback procedure	to invoke to convert text from
       this encoding into UTF-8.  The fromUtfProc refers to a callback	proce-
       dure  to	 invoke	 to  convert  text from	UTF-8 into this	encoding.  The
       freeProc	refers to a callback procedure to invoke when this encoding is
       deleted.	  The  freeProc	field may be NULL.  The	clientData contains an
       arbitrary one-word value	passed to toUtfProc, fromUtfProc, and freeProc
       whenever	 they  are  called.   Typically,  this	is a pointer to	a data
       structure containing encoding-specific information that can be used  by
       the callback procedures.	 For instance, two very	similar	encodings such
       as ascii	and macRoman may use the same callback procedure, but use dif-
       ferent  values  of  clientData  to  control its behavior.  The nullSize
       specifies the number of zero bytes that signify end-of-string  in  this
       encoding.   It  must be 1 (for single-byte or multi-byte	encodings like
       ASCII or	Shift-JIS) or 2	 (for  double-byte  encodings  like  Unicode).
       Constant-sized  encodings  with	3 or more bytes	per character (such as
       CNS11643) are not accepted.

       The callback procedures toUtfProc and fromUtfProc should	match the type
       Tcl_EncodingConvertProc:

	      typedef int Tcl_EncodingConvertProc(
		      ClientData clientData,
		      const char *src,
		      int srcLen,
		      int flags,
		      Tcl_EncodingState	*statePtr,
		      char *dst,
		      int dstLen,
		      int *srcReadPtr,
		      int *dstWrotePtr,
		      int *dstCharsPtr);

       The  toUtfProc  and  fromUtfProc	 procedures  are called	by the Tcl_Ex-
       ternalToUtf or Tcl_UtfToExternal	family of functions to perform the ac-
       tual  conversion.   The clientData parameter to these procedures	is the
       same as the clientData field specified to Tcl_CreateEncoding  when  the
       encoding	 was  created.	The remaining arguments	to the callback	proce-
       dures are the same as the arguments, documented at the top, to  Tcl_Ex-
       ternalToUtf  or	Tcl_UtfToExternal,  with the following exceptions.  If
       the srcLen argument to one of those high-level functions	 is  negative,
       the  value passed to the	callback procedure will	be the appropriate en-
       coding-specific string length of	src.  If any of	the  srcReadPtr,  dst-
       WrotePtr,  or  dstCharsPtr arguments to one of the high-level functions
       is NULL,	the corresponding value	passed to the callback procedure  will
       be a non-NULL location.

       The  callback  procedure	 freeProc,  if non-NULL, should	match the type
       Tcl_EncodingFreeProc:

	      typedef void Tcl_EncodingFreeProc(
		      ClientData clientData);

       This freeProc function is called	when the  encoding  is	deleted.   The
       clientData  parameter  is the same as the clientData field specified to
       Tcl_CreateEncoding when the encoding was	created.

       Tcl_GetEncodingSearchPath and Tcl_SetEncodingSearchPath are  called  to
       access and set the list of filesystem directories searched for encoding
       data files.

       The value returned by Tcl_GetEncodingSearchPath is the value stored  by
       the  last successful call to Tcl_SetEncodingSearchPath.	If no calls to
       Tcl_SetEncodingSearchPath have occurred,	Tcl will  compute  an  initial
       value  based on the environment.	 There is one encoding search path for
       the entire process, shared by all threads in the	process.

       Tcl_SetEncodingSearchPath stores	searchPath and returns TCL_OK,	unless
       searchPath  is  not  a valid Tcl	list, which causes TCL_ERROR to	be re-
       turned.	The elements of	searchPath are not verified as existing	 read-
       able  filesystem	 directories.	When searching for encoding data files
       takes place, and	non-existent or	non-readable filesystem	directories on
       the searchPath are silently ignored.

       Tcl_GetDefaultEncodingDir  and  Tcl_SetDefaultEncodingDir  are obsolete
       interfaces best replaced	with calls  to	Tcl_GetEncodingSearchPath  and
       Tcl_SetEncodingSearchPath.  They	are called to access and set the first
       element of the searchPath list.	Since Tcl searches searchPath for  en-
       coding data files in list order,	these routines establish the "default"
       directory in which to find encoding data	files.

ENCODING FILES
       Space would prohibit precompiling into Tcl every	possible encoding  al-
       gorithm,	 so  many encodings are	stored on disk as dynamically-loadable
       encoding	files.	This behavior also allows the  user  to	 create	 addi-
       tional  encoding	 files	that  can  be loaded using the same mechanism.
       These encoding files contain information	about the tables and/or	escape
       sequences  used	to  map	between	an external encoding and Unicode.  The
       external	encoding may consist of	single-byte,  multi-byte,  or  double-
       byte characters.

       Each  dynamically-loadable encoding is represented as a text file.  The
       initial line of the file, beginning with	a "#"  symbol,	is  a  comment
       that  provides a	human-readable description of the file.	 The next line
       identifies the type of encoding file.  It can be	one of	the  following
       letters:

       [1] S  A	 single-byte  encoding,	where one character is always one byte
	      long in the encoding.  An	example	is iso8859-1, used by many Eu-
	      ropean languages.

       [2] D  A	 double-byte encoding, where one character is always two bytes
	      long in the encoding.  An	example	 is  big5,  used  for  Chinese
	      text.

       [3] M  A	 multi-byte encoding, where one	character may be either	one or
	      two bytes	long.  Certain bytes are lead bytes,  indicating  that
	      another  byte must follow	and that together the two bytes	repre-
	      sent one character.  Other bytes are not lead bytes  and	repre-
	      sent  themselves.	 An example is shiftjis, used by many Japanese
	      computers.

       [4] E  An escape-sequence encoding, specifying that  certain  sequences
	      of bytes do not represent	characters, but	commands that describe
	      how following bytes should be interpreted.

       The rest	of the lines in	the file depend	on the type.

       Cases [1], [2], and [3] are collectively	referred to as table-based en-
       coding files.  The lines	in a table-based encoding file are in the same
       format as this example taken from the shiftjis encoding	(this  is  not
       the complete file):

	      #	Encoding file: shiftjis, multi-byte
	      M
	      003F 0 40
	      00
	      0000000100020003000400050006000700080009000A000B000C000D000E000F
	      0010001100120013001400150016001700180019001A001B001C001D001E001F
	      0020002100220023002400250026002700280029002A002B002C002D002E002F
	      0030003100320033003400350036003700380039003A003B003C003D003E003F
	      0040004100420043004400450046004700480049004A004B004C004D004E004F
	      0050005100520053005400550056005700580059005A005B005C005D005E005F
	      0060006100620063006400650066006700680069006A006B006C006D006E006F
	      0070007100720073007400750076007700780079007A007B007C007D203E007F
	      0080000000000000000000000000000000000000000000000000000000000000
	      0000000000000000000000000000000000000000000000000000000000000000
	      0000FF61FF62FF63FF64FF65FF66FF67FF68FF69FF6AFF6BFF6CFF6DFF6EFF6F
	      FF70FF71FF72FF73FF74FF75FF76FF77FF78FF79FF7AFF7BFF7CFF7DFF7EFF7F
	      FF80FF81FF82FF83FF84FF85FF86FF87FF88FF89FF8AFF8BFF8CFF8DFF8EFF8F
	      FF90FF91FF92FF93FF94FF95FF96FF97FF98FF99FF9AFF9BFF9CFF9DFF9EFF9F
	      0000000000000000000000000000000000000000000000000000000000000000
	      0000000000000000000000000000000000000000000000000000000000000000
	      81
	      0000000000000000000000000000000000000000000000000000000000000000
	      0000000000000000000000000000000000000000000000000000000000000000
	      0000000000000000000000000000000000000000000000000000000000000000
	      0000000000000000000000000000000000000000000000000000000000000000
	      300030013002FF0CFF0E30FBFF1AFF1BFF1FFF01309B309C00B4FF4000A8FF3E
	      FFE3FF3F30FD30FE309D309E30034EDD30053006300730FC20152010FF0F005C
	      301C2016FF5C2026202520182019201C201DFF08FF0930143015FF3BFF3DFF5B
	      FF5D30083009300A300B300C300D300E300F30103011FF0B221200B100D70000
	      00F7FF1D2260FF1CFF1E22662267221E22342642264000B0203220332103FFE5
	      FF0400A200A3FF05FF03FF06FF0AFF2000A72606260525CB25CF25CE25C725C6
	      25A125A025B325B225BD25BC203B301221922190219121933013000000000000
	      000000000000000000000000000000002208220B2286228722822283222A2229
	      000000000000000000000000000000002227222800AC21D221D4220022030000
	      0000000000000000000000000000000000000000222022A52312220222072261
	      2252226A226B221A223D221D2235222B222C0000000000000000000000000000
	      212B2030266F266D266A2020202100B6000000000000000025EF000000000000

       The  third  line	of the file is three numbers.  The first number	is the
       fallback	character (in base 16) to use when converting  from  UTF-8  to
       this  encoding.	 The  second number is a 1 if this file	represents the
       encoding	for a symbol font, or 0	otherwise.  The	last number  (in  base
       10) is how many pages of	data follow.

       Subsequent  lines  in  the example above	are pages that describe	how to
       map from	the encoding into 2-byte Unicode.  The first line  in  a  page
       identifies  the page number.  Following it are 256 double-byte numbers,
       arranged	as 16 rows of 16 numbers.  Given a character in	the  encoding,
       the  high  byte of that character is used to select which page, and the
       low byte	of that	character is used as an	index to  select  one  of  the
       double-byte  numbers in that page - the value obtained being the	corre-
       sponding	Unicode	character.  By examination of the example  above,  one
       can see that the	characters 0x7E	and 0x8163 in shiftjis map to 203E and
       2026 in Unicode,	respectively.

       Following the first page	will be	all the	other pages, each in the  same
       format  as  the	first: one number identifying the page followed	by 256
       double-byte Unicode characters.	If a character in the encoding maps to
       the  Unicode character 0000, it means that the character	does not actu-
       ally exist.  If all characters on a page	would map to 0000,  that  page
       can be omitted.

       Case  [4]  is  the escape-sequence encoding file.  The lines in an this
       type of file are	in the same format as  this  example  taken  from  the
       iso2022-jp encoding:

	      #	Encoding file: iso2022-jp, escape-driven
	      E
	      init	     {}
	      final	     {}
	      iso8859-1	     \x1b(B
	      jis0201	     \x1b(J
	      jis0208	     \x1b$@
	      jis0208	     \x1b$B
	      jis0212	     \x1b$(D
	      gb2312	     \x1b$A
	      ksc5601	     \x1b$(C

       In  the file, the first column represents an option and the second col-
       umn is the associated value.  init is a string to emit or expect	before
       the  first  character  is converted, while final	is a string to emit or
       expect after the	last character.	 All other options are names of	table-
       based encodings;	the associated value is	the escape-sequence that marks
       that encoding.  Tcl syntax is used for the values; in the  above	 exam-
       ple,  for  instance, "{}" represents the	empty string and "\x1b"	repre-
       sents character 27.

       When Tcl_GetEncoding encounters an encoding  name  that	has  not  been
       loaded,	it  attempts to	load an	encoding file called name.enc from the
       encoding	subdirectory of	each  directory	 that  Tcl  searches  for  its
       script  library.	 If the	encoding file exists, but is malformed,	an er-
       ror message will	be left	in interp.

REFERENCE COUNT	MANAGEMENT
       Tcl_GetEncodingFromObj does not modify the reference count of  its  ob-
       jPtr  argument;	it only	reads. Note however that this function may set
       the interpreter result; if that is the only place  that	is  holding  a
       reference to the	object,	it will	be deleted.

       Tcl_GetEncodingSearchPath  returns  an object with a reference count of
       at least	1.

SEE ALSO
       encoding(n)

KEYWORDS
       utf, encoding, convert

Tcl				      8.1		    Tcl_GetEncoding(3)

NAME | SYNOPSIS | ARGUMENTS | INTRODUCTION | DESCRIPTION | ENCODING FILES | REFERENCE COUNT MANAGEMENT | SEE ALSO | KEYWORDS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=Tcl_CreateEncoding.tcl87&sektion=3&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help