Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SNMP::Info::Layer2::HPUser Contributed Perl DocumentaSNMP::Info::Layer2::HP(3)

NAME
       SNMP::Info::Layer2::HP -	SNMP Interface to HP Procurve Switches

AUTHOR
       Max Baker

SYNOPSIS
	# Let SNMP::Info determine the correct subclass	for you.
	my $hp = new SNMP::Info(
				 AutoSpecify =>	1,
				 Debug	     =>	1,
				 DestHost    =>	'myswitch',
				 Community   =>	'public',
				 Version     =>	2
			       )
	   or die "Can't connect to DestHost.\n";

	my $class      = $hp->class();
	print "SNMP::Info determined this device to fall under subclass	: $class\n";

DESCRIPTION
       Provides	abstraction to the configuration information obtainable	from a
       HP ProCurve Switch via SNMP.

       Note:  Some HP Switches will connect via	SNMP version 1,	but a lot of
       config data will	not be available.  Make	sure you try and connect with
       Version 2 first,	and then fail back to version 1.

       For speed or debugging purposes you can call the	subclass directly, but
       not after determining a more specific class using the method above.

	my $hp = new SNMP::Info::Layer2::HP(...);

   Inherited Classes
       SNMP::Info::Layer2
       SNMP::Info::MAU

   Required MIBs
       RFC1271-MIB
	   Included in V2 mibs from Cisco

       HP-ICF-OID
	   (this MIB new with SNMP::Info 0.8)

       STATISTICS-MIB
       NETSWITCH-MIB
       CONFIG-MIB
       HP-ICF-BRIDGE
       HP-ICF-POE-MIB
       HP-ICF-CHASSIS
       SEMI-MIB
       HP-SWITCH-PL-MIB
       BLADETYPE4-NETWORK-MIB

       The last	four MIBs listed are from HP and can be	found at
       <http://www.hp.com/rnd/software>	or
       <http://www.hp.com/rnd/software/MIBs.htm>

Change Log
       Version 0.4 - Removed ENTITY-MIB	e_*() methods to separate sub-class -
       SNMP::Info::Entity

GLOBALS
       These are methods that return scalar value from SNMP

       $hp->cpu()
	   Returns CPU Utilization in percentage.

       $hp->log()
	   Returns all the log entries from the	switch's log that are not Link
	   up or down messages.

       $hp->mem_free()
	   Returns bytes of free memory

       $hp->mem_total()
	   Return bytes	of total memory

       $hp->mem_used()
	   Returns bytes of used memory

       $hp->model()
	   Returns the model number of the HP Switch.  Will translate between
	   the HP Part number and the common model number with this map	:

	    %MODEL_MAP = (
	       'J8131A'	=> 'WAP-420-WW',
	       'J8130A'	=> 'WAP-420-NA',
	       'J8133A'	=> 'AP520WL',
	       'J8680A'	=> '9408sl',
	       'J9091A'	=> '8212zl',
	       'J9475A'	=> '8206zl',
	       'J9265A'	=> '6600ml-24XG',
	       'J9264A'	=> '6600ml-24G-4XG',
	       'J9263A'	=> '6600ml-24G',
	       'J9452A'	=> '6600-48G-4XG',
	       'J9451A'	=> '6600-48G',
	       'J8474A'	=> '6410cl-6XG',
	       'J8433A'	=> '6400cl-6XG',
	       'J8992A'	=> '6200yl-24G',
	       'J4902A'	=> '6108',
	       'J8698A'	=> '5412zl',
	       'J8719A'	=> '5408yl',
	       'J8697A'	=> '5406zl',
	       'J8718A'	=> '5404yl',
	       'J4819A'	=> '5308XL',
	       'J4850A'	=> '5304XL',
	       'J8773A'	=> '4208vl',
	       'J8770A'	=> '4204vl',
	       'J8772A'	=> '4202vl-72',
	       'J9032A'	=> '4202vl-68G',
	       'J9031A'	=> '4202vl-68',
	       'J8771A'	=> '4202vl-48G',
	       'J4865A'	=> '4108GL',
	       'J4887A'	=> '4104GL',
	       'J9588A'	=> '3800-48G-PoE+-4XG',
	       'J9574A'	=> '3800-48G-PoE+-4SFP+',
	       'J9586A'	=> '3800-48G-4XG',
	       'J9576A'	=> '3800-48G-4SFP+',
	       'J9584A'	=> '3800-24SFP-2SFP+',
	       'J9587A'	=> '3800-24G-PoE+-2XG',
	       'J9573A'	=> '3800-24G-PoE+-2SFP+',
	       'J9585A'	=> '3800-24G-2XG',
	       'J9575A'	=> '3800-24G-2SFP+',
	       'J8693A'	=> '3500yl-48G-PWR',
	       'J8692A'	=> '3500yl-24G-PWR',
	       'J9473A'	=> '3500-48-PoE',
	       'J9472A'	=> '3500-48',
	       'J9471A'	=> '3500-24-PoE',
	       'J9470A'	=> '3500-24',
	       'J4906A'	=> '3400cl-48G',
	       'J4905A'	=> '3400cl-24G',
	       'J4815A'	=> '3324XL',
	       'J4851A'	=> '3124',
	       'J9562A'	=> '2915-8G-PoE',
	       'J9148A'	=> '2910al-48G-PoE+',
	       'J9147A'	=> '2910al-48G',
	       'J9146A'	=> '2910al-24G-PoE+',
	       'J9145A'	=> '2910al-24G',
	       'J9050A'	=> '2900-48G',
	       'J9049A'	=> '2900-24G',
	       'J4904A'	=> '2848',
	       'J4903A'	=> '2824',
	       'J9022A'	=> '2810-48G',
	       'J9021A'	=> '2810-24G',
	       'J8165A'	=> '2650-PWR',
	       'J4899B'	=> '2650-CR',
	       'J4899C'	=> '2650C',
	       'J4899A'	=> '2650',
	       'J8164A'	=> '2626-PWR',
	       'J4900B'	=> '2626-CR',
	       'J4900C'	=> '2626C',
	       'J4900A'	=> '2626',
	       'J9627A'	=> '2620-48-PoE+',
	       'J9626A'	=> '2620-48',
	       'J9624A'	=> '2620-24-PPoE+',
	       'J9625A'	=> '2620-24-PoE+',
	       'J9623A'	=> '2620-24',
	       'J9565A'	=> '2615-8-PoE',
	       'J9089A'	=> '2610-48-PWR',
	       'J9088A'	=> '2610-48',
	       'J9087A'	=> '2610-24-PWR',
	       'J9086A'	=> '2610-24/12PWR',
	       'J9085A'	=> '2610-24',
	       'J8762A'	=> '2600-8-PWR',
	       'J4813A'	=> '2524',
	       'J9298A'	=> '2520G-8-PoE',
	       'J9299A'	=> '2520G-24-PoE',
	       'J9137A'	=> '2520-8-PoE',
	       'J9138A'	=> '2520-24-PoE',
	       'J4812A'	=> '2512',
	       'J9280A'	=> '2510G-48',
	       'J9279A'	=> '2510G-24',
	       'J9020A'	=> '2510-48A',
	       'J9019B'	=> '2510-24B',
	       'J9019A'	=> '2510-24A',
	       'J4818A'	=> '2324',
	       'J4817A'	=> '2312',
	       'J9449A'	=> '1810G-8',
	       'J9450A'	=> '1810G-24',
	       'J9029A'	=> '1800-8G',
	       'J9028A'	=> '1800-24G',
	    );

       $hp->os()
	   Returns hp

       $hp->os_bin()
	   "hpSwitchRomVersion.0"

       $hp->os_ver()
	   Tries to use	os_version() and if that fails will try	and cull the
	   version from	the description	field.

       $hp->os_version()
	   "hpSwitchOsVersion.0"

       $hp->serial()
	   Returns serial number if available through SNMP

       $hp->slots()
	   Returns number of entries in	$hp->e_name that have 'slot' in	them.

       $hp->vendor()
	   hp

       $hp->fan()
	   Returns fan status

       $hp->ps1_status()
	   Power supply	1 status

       $hp->ps2_status()
	   Power supply	2 status

       $hp->peth_port_power()
	   Power supplied by PoE ports,	in milliwatts
	   ("hpicfPoePethPsePortPower")

       $hp->stp_ver()
	   Returns what	version	of STP the device is running.
	   ("hpicfBridgeRstpForceVersion" with fallback	to inherited
	   stp_ver())

   Globals imported from SNMP::Info::Layer2
       See documentation in "GLOBALS" in SNMP::Info::Layer2 for	details.

   Globals imported from SNMP::Info::MAU
       See documentation in "GLOBALS" in SNMP::Info::MAU for details.

TABLE METHODS
       These are methods that return tables of information in the form of a
       reference to a hash.

   Overrides
       $hp->interfaces()
	   Uses	$hp->i_description()

       $hp->i_duplex()
	   Returns reference to	map of IIDs to current link duplex.

       $hp->i_duplex_admin()
	   Returns reference to	hash of	IIDs to	admin duplex setting.

       $hp->vendor_i_type()
	   Returns reference to	hash of	IIDs to	HP specific port type
	   ("hpSwitchPortType").

       $hp->i_name()
	   Crosses i_name() with $hp->e_name() using $hp->e_port() and
	   i_alias()

       $hp->peth_port_ifindex()
	   Returns reference to	hash of	power Ethernet port table entries map
	   back	to interface index (c<ifIndex>)

       "agg_ports"
	   Returns a HASH reference mapping from slave to master port for each
	   member of a port bundle on the device. Keys are ifIndex of the
	   slave ports,	Values are ifIndex of the corresponding	master ports.

   Table Methods imported from SNMP::Info::Layer2
       See documentation in "TABLE METHODS" in SNMP::Info::Layer2 for details.

   Table Methods imported from SNMP::Info::MAU
       See documentation in "TABLE METHODS" in SNMP::Info::MAU for details.

MUNGES
       munge_hp_c_id()
	   Munge for c_id which	handles	CDP and	LLDP.

SET METHODS
       These are methods that provide SNMP set functionality for overridden
       methods or provide a simpler interface to complex set operations.  See
       "SETTING	DATA VIA SNMP" in SNMP::Info for general information on	set
       operations.

       set_i_vlan()
       set_i_vlan_tagged()

perl v5.32.0			  2020-08-09	     SNMP::Info::Layer2::HP(3)

NAME | AUTHOR | SYNOPSIS | DESCRIPTION | Change Log | GLOBALS | TABLE METHODS | MUNGES | SET METHODS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=SNMP::Info::Layer2::HP&sektion=3&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help