# FreeBSD Manual Pages

Local::Local(3) User Contributed Perl Documentation Local::Local(3)NAMEIPA::Local - methods that produce images where every pixel is a function of pixels in the neighborhoodDESCRIPTIONContains functions that operate in the vicinity of a pixel, and produce image where every pixel is dependant on the values of the source pixel and the values of its neighbors. The process can be described with the mapping function |r(i,j),r(i+1,j)...| s = M |... | |r(j+1,i) ... | where "r" and "s" are the pixel values in the input and output images, respectively. crispening IMAGE Applies the crispening algorithm to IMAGE and returns the result. Supported types: Byte sobel IMAGE [ jobMask = sobelNWSE|sobelNESW, conversionType = conversionScaleAbs, combineType = combineMaxAbs, divisor = 1] Applies Sobel edge detector to IMAGE. Supported types: Byte Parameters: jobMask INTEGER Combination of the integer constants, that mask the pixels in Sobel 3x3 kernel. If the kernel is to be drawn as | (-1,1) (0,1) (1,1) | | (-1,0) (0,0) (1,0) | | (-1,-1)(0,-1)(1,-1)| Then the constants mask the following points: sobelRow - (-1,0),(1,0) sobelColumn - (0,1),(0,-1) sobelNESW - (1,1),(-1,-1) sobelNWSE - (-1,1),(1,-1) (0,0) point is always masked. divisor INTEGER The resulting pixel value is divided to "divisor" value after the kernel convolution is applied. "conversionType" and <combineType> parameters described in combine. GEF IMAGE [ a0 = 1.3, s = 0.7] Applies GEF algorithm ( first derivative operator for symmetric exponential filter) to IMAGE. Supported types: Byte SDEF IMAGE [ a0 = 1.3, s = 0.7] Applies SDEF algorithm ( second derivative operator for symmetric exponential filter) to IMAGE. Supported types: Byte deriche IMAGE [ alpha ] Applies Deriche edge detector. Supported types: Byte filter3x3 IMAGE [ matrix, expandEdges = 0, edgecolor = 0, conversionType = conversionScaleAbs, rawOutput = 0, divisor = 1 ] Applies convolution with a custom 3x3 kernel, passed in "matrix". Supported types: Byte Parameters: matrix ARRAY Array of 9 integers, a 3x3 kernel, to be convoluted with IMAGE. Indexes are: |0 1 2| |3 4 5| |6 7 8| expandEdges BOOLEAN If false, the edge pixels ( borders ) not used in the convolution as center pixels. If true, the edge pixels used, and in this case "edgecolor" value is used to substitute the pixels outside the image. edgecolor INTEGER Integer value, used for substitution of pixel values outside IMAGE, when "expandEdges" parameter is set to 1. divisor INTEGER The resulting pixel value is divided to "divisor" value after the kernel convolution is applied. conversionType See combine rawOutput See combine median IMAGE [ w = 3, h = 3 ] Performs adaptive thresholding with median filter with window dimensions "w" and "h". unionFind IMAGE [ method, threshold ] Applies a union find algorithm selected by "method". The only implemented method is average-based region grow ( 'ave' string constant ). Its only parameter is "threshold", integer value of the balance merger function. Supported types: Byte hysteresis IMAGE, thresold => [ thr0, thr1], neighborhood => 4 or 8 Perform binary hysteresis thresholding of Byte image with two thresholds, thr0 and thr1. A pixel is set to 1, if its value is larger than thr1 or if it is larger than thr0 and the pixel is adjacent to already marked pixels. Default value of neighborhood is 8. Supported types: Byte gaussian SIZE, SIGMA Generates a square image of the given SIZe and populates with with gaussian function with given SIGMA. laplacian SIZE, SIGMA Generates a square image of the given SIZe and populates with with inverse gaussian function with given SIGMA. gradients IMAGE This function computes a two-dimensional gradient (magnitude and direction) of an image, using two convolution kernels. The magnitude is computed as the vector magnitude of the output of the two kernels, and the direction is computed as the angle between the two orthogonal gradient vectors. The convolution kernels are (currently limited to) 3x3 masks for calculating separate vertical and horizontal derivatives. (Copyright (c) 1988 by the University of Arizona Digital Image Analysis Lab). canny IMAGE [ size = 3, sigma = 2, ridge = 0 ] First part of the Canny edge detector (without ridge strength selection). The ridge strength must be supplied by the user. nms IMAGE [ set = 255, clear = 0 ] Applies non-maximal suppression to the image, and replaces all non- maximal pixels with the "clear" color, and maximal with "set" color. scale IMAGE [ size = 3, sigma_square = 4 ] Convolves a given image with a gaussian, where the latter is calculated with the given size and square root of sigma_square. ridge IMAGE [ anorm = false, mul = 1, scale = 2, size = 3 ] First part of the Lindeberg edge detector (without scale selection). The scale must be supplied by the user. "size" is used in generation of the gaussian kernel. "mul" is the custom multiply factor to the calclated ridge strength, the maximum absolute value to the principal curvatures. "anorm" selects whether the Laplacian blob response should be included ( "false" ) ), or suppressed ( "true" ). convolution IMAGE, KERNEL Convolves IMAGE with the given KERNEL. zerocross IMAGE, cmp = 0 Creates a map from IMAGE where white pixels are assigned to spots where image crosses the zero plane. The zero level is 0 by default, but can be changed by setting the "cmp" argument. perl v5.24.1 2011-05-08 Local::Local(3)

NAME | DESCRIPTION

Want to link to this manual page? Use this URL:

<https://www.freebsd.org/cgi/man.cgi?query=IPA::Local&sektion=3&manpath=FreeBSD+12.0-RELEASE+and+Ports>