Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
Hash::Util::FieldHash(3Perl Programmers	Reference GuidHash::Util::FieldHash(3)

       Hash::Util::FieldHash - Support for Inside-Out Classes

	 ### Create fieldhashes
	 use Hash::Util	qw(fieldhash fieldhashes);

	 # Create a single field hash
	 fieldhash my %foo;

	 # Create three	at once...
	 fieldhashes \ my(%foo,	%bar, %baz);
	 # ...or any number
	 fieldhashes @hashrefs;

	 ### Create an idhash and register it for garbage collection
	 use Hash::Util::FieldHash qw(idhash register);
	 idhash	my %name;
	 my $object = \	do { my	$o };
	 # register the	idhash for garbage collection with $object
	 register($object, \ %name);
	 # the following entry will be deleted when $object goes out of	scope
	 $name{$object}	= 'John	Doe';

	 ### Register an ordinary hash for garbage collection
	 use Hash::Util::FieldHash qw(id register);
	 my %name;
	 my $object = \	do { my	$o };
	 # register the	hash %name for garbage collection of $object's id
	 register $object, \ %name;
	 # the following entry will be deleted when $object goes out of	scope
	 $name{id $object} = 'John Doe';

       "Hash::Util::FieldHash" offers a	number of functions in support of "The
       Inside-out Technique" of	class construction.


	   Returns the reference address of a reference	$obj.  If $obj is not
	   a reference,	returns	$obj.

	   This	function is a stand-in replacement for Scalar::Util::refaddr,
	   that	is, it returns the reference address of	its argument as	a
	   numeric value.  The only difference is that "refaddr()" returns
	   "undef" when	given a	non-reference while "id()" returns its
	   argument unchanged.

	   "id()" also uses a caching technique	that makes it faster when the
	   id of an object is requested	often, but slower if it	is needed only
	   once	or twice.

	       $obj = id_2obj($id)

	   If $id is the id of a registered object (see	"register"), returns
	   the object, otherwise an undefined value.  For registered objects
	   this	is the inverse function	of "id()".

	       register($obj, @hashrefs)

	   In the first	form, registers	an object to work with for the
	   function "id_2obj()".  In the second	form, it additionally marks
	   the given hashrefs down for garbage collection.  This means that
	   when	the object goes	out of scope, any entries in the given hashes
	   under the key of "id($obj)" will be deleted from the	hashes.

	   It is a fatal error to register a non-reference $obj.  Any non-
	   hashrefs among the following	arguments are silently ignored.

	   It is not an	error to register the same object multiple times with
	   varying sets	of hashrefs.  Any hashrefs that	are not	registered yet
	   will	be added, others ignored.

	   Registry also implies thread	support.  When a new thread is
	   created, all	references are replaced	with new ones, including all
	   objects.  If	a hash uses the	reference address of an	object as a
	   key,	that connection	would be broken.  With a registered object,
	   its id will be updated in all hashes	registered with	it.

	       idhash my %hash

	   Makes an idhash from	the argument, which must be a hash.

	   An idhash works like	a normal hash, except that it stringifies a
	   reference used as a key differently.	 A reference is	stringified as
	   if the "id()" function had been invoked on it, that is, its
	   reference address in	decimal	is used	as the key.

	       idhashes	\ my(%hash, %gnash, %trash)
	       idhashes	\ @hashrefs

	   Creates many	idhashes from its hashref arguments.  Returns those
	   arguments that could	be converted or	their number in	scalar

	       fieldhash %hash;

	   Creates a single fieldhash.	The argument must be a hash.  Returns
	   a reference to the given hash if successful,	otherwise nothing.

	   A fieldhash is, in short, an	idhash with auto-registry.  When an
	   object (or, indeed, any reference) is used as a fieldhash key, the
	   fieldhash is	automatically registered for garbage collection	with
	   the object, as if "register $obj, \ %fieldhash" had been called.

	       fieldhashes @hashrefs;

	   Creates any number of field hashes.	Arguments must be hash
	   references.	Returns	the converted hashrefs in list context,	their
	   number in scalar context.

       A word on terminology:  I shall use the term field for a	scalar piece
       of data that a class associates with an object.	Other terms that have
       been used for this concept are "object variable", "(object) property",
       "(object) attribute" and	more.  Especially "attribute" has some
       currency	among Perl programmer, but that	clashes	with the "attributes"
       pragma.	The term "field" also has some currency	in this	sense and
       doesn't seem to conflict	with other Perl	terminology.

       In Perl,	an object is a blessed reference.  The standard	way of
       associating data	with an	object is to store the data inside the
       object's	body, that is, the piece of data pointed to by the reference.

       In consequence, if two or more classes want to access an	object they
       must agree on the type of reference and also on the organization	of
       data within the object body.  Failure to	agree on the type results in
       immediate death when the	wrong method tries to access an	object.
       Failure to agree	on data	organization may lead to one class trampling
       over the	data of	another.

       This object model leads to a tight coupling between subclasses.	If one
       class wants to inherit from another (and	both classes access object
       data), the classes must agree about implementation details.
       Inheritance can only be used among classes that are maintained
       together, in a single source or not.

       In particular, it is not	possible to write general-purpose classes in
       this technique, classes that can	advertise themselves as	"Put me	on
       your @ISA list and use my methods".  If the other class has different
       ideas about how the object body is used,	there is trouble.

       For reference "Name_hash" in "Example 1"	shows the standard
       implementation of a simple class	"Name" in the well-known hash based
       way.  It	also demonstrates the predictable failure to construct a
       common subclass "NamedFile" of "Name" and the class "IO::File" (whose
       objects must be globrefs).

       Thus, techniques	are of interest	that store object data not in the
       object body but some other place.

   The Inside-out Technique
       With inside-out classes,	each class declares a (typically lexical) hash
       for each	field it wants to use.	The reference address of an object is
       used as the hash	key.  By definition, the reference address is unique
       to each object so this guarantees a place for each field	that is
       private to the class and	unique to each object.	See "Name_id" in
       "Example	1" for a simple	example.

       In comparison to	the standard implementation where the object is	a hash
       and the fields correspond to hash keys, here the	fields correspond to
       hashes, and the object determines the hash key.	Thus the hashes	appear
       to be turned inside out.

       The body	of an object is	never examined by an inside-out	class, only
       its reference address is	used.  This allows for the body	of an actual
       object to be anything at	all while the object methods of	the class
       still work as designed.	This is	a key feature of inside-out classes.

   Problems of Inside-out
       Inside-out classes give us freedom of inheritance, but as usual there
       is a price.

       Most obviously, there is	the necessity of retrieving the	reference
       address of an object for	each data access.  It's	a minor	inconvenience,
       but it does clutter the code.

       More important (and less	obvious) is the	necessity of garbage
       collection.  When a normal object dies, anything	stored in the object
       body is garbage-collected by perl.  With	inside-out objects, Perl knows
       nothing about the data stored in	field hashes by	a class, but these
       must be deleted when the	object goes out	of scope.  Thus	the class must
       provide a "DESTROY" method to take care of that.

       In the presence of multiple classes it can be non-trivial to make sure
       that every relevant destructor is called	for every object.  Perl	calls
       the first one it	finds on the inheritance tree (if any) and that's it.

       A related issue is thread-safety.  When a new thread is created,	the
       Perl interpreter	is cloned, which implies that all reference addresses
       in use will be replaced with new	ones.  Thus, if	a class	tries to
       access a	field of a cloned object its (cloned) data will	still be
       stored under the	now invalid reference address of the original in the
       parent thread.  A general "CLONE" method	must be	provided to re-
       establish the association.

       "Hash::Util::FieldHash" addresses these issues on several levels.

       The "id()" function is provided in addition to the existing
       "Scalar::Util::refaddr()".  Besides its short name it can be a little
       faster under some circumstances (and a bit slower under others).
       Benchmark if it matters.	 The working of	"id()" also allows the use of
       the class name as a generic object as described further down.

       The "id()" function is incorporated in id hashes	in the sense that it
       is called automatically on every	key that is used with the hash.	 No
       explicit	call is	necessary.

       The problems of garbage collection and thread safety are	both addressed
       by the function "register()".  It registers an object together with any
       number of hashes.  Registry means that when the object dies, an entry
       in any of the hashes under the reference	address	of this	object will be
       deleted.	 This guarantees garbage collection in these hashes.  It also
       means that on thread cloning the	object's entries in registered hashes
       will be replaced	with updated entries whose key is the cloned object's
       reference address.  Thus	the object-data	association becomes thread-

       Object registry is best done when the object is initialized for use
       with a class.  That way,	garbage	collection and thread safety are
       established for every object and	every field that is initialized.

       Finally,	field hashes incorporate all these functions in	one package.
       Besides automatically calling the "id()"	function on every object used
       as a key, the object is registered with the field hash on first use.
       Classes based on	field hashes are fully garbage-collected and thread
       safe without further measures.

   More	Problems
       Another problem that occurs with	inside-out classes is serialization.
       Since the object	data is	not in its usual place,	standard routines like
       "Storable::freeze()", "Storable::thaw()"	and "Data::Dumper::Dumper()"
       can't deal with it on their own.	 Both "Data::Dumper" and "Storable"
       provide the necessary hooks to make things work,	but the	functions or
       methods used by the hooks must be provided by each inside-out class.

       A general solution to the serialization problem would require another
       level of	registry, one that associates classes and fields.  So far, the
       functions of "Hash::Util::FieldHash" are	unaware	of any classes,	which
       I consider a feature.  Therefore	"Hash::Util::FieldHash"	doesn't
       address the serialization problems.

   The Generic Object
       Classes based on	the "id()" function (and hence classes based on
       "idhash()" and "fieldhash()") show a peculiar behavior in that the
       class name can be used like an object.  Specifically, methods that set
       or read data associated with an object continue to work as class
       methods,	just as	if the class name were an object, distinct from	all
       other objects, with its own data.  This object may be called the
       generic object of the class.

       This works because field	hashes respond to keys that are	not references
       like a normal hash would	and use	the string offered as the hash key.
       Thus, if	a method is called as a	class method, the field	hash is
       presented with the class	name instead of	an object and blithely uses it
       as a key.  Since	the keys of real objects are decimal numbers, there is
       no conflict and the slot	in the field hash can be used like any other.
       The "id()" function behaves correspondingly with	respect	to non-
       reference arguments.

       Two possible uses (besides ignoring the property) come to mind.	A
       singleton class could be	implemented this using the generic object.  If
       necessary, an "init()" method could die or ignore calls with actual
       objects (references), so	only the generic object	will ever exist.

       Another use of the generic object would be as a template.  It is	a
       convenient place	to store class-specific	defaults for various fields to
       be used in actual object	initialization.

       Usually,	the feature can	be entirely ignored.  Calling object methods
       as class	methods	normally leads to an error and isn't used routinely
       anywhere.  It may be a problem that this	error isn't indicated by a
       class with a generic object.

   How to use Field Hashes
       Traditionally, the definition of	an inside-out class contains a bare
       block inside which a number of lexical hashes are declared and the
       basic accessor methods defined, usually through
       "Scalar::Util::refaddr".	 Further methods may be	defined	outside	this
       block.  There has to be a DESTROY method	and, for thread	support, a
       CLONE method.

       When field hashes are used, the basic structure remains the same.  Each
       lexical hash will be made a field hash.	The call to "refaddr" can be
       omitted from the	accessor methods.  DESTROY and CLONE methods are not

       If you have an existing inside-out class, simply	making all hashes
       field hashes with no other change should	make no	difference.  Through
       the calls to "refaddr" or equivalent, the field hashes never get	to see
       a reference and work like normal	hashes.	 Your DESTROY (and CLONE)
       methods are still needed.

       To make the field hashes	kick in, it is easiest to redefine "refaddr"

	   sub refaddr { shift }

       instead of importing it from "Scalar::Util".  It	should now be possible
       to disable DESTROY and CLONE.  Note that	while it isn't disabled,
       DESTROY will be called before the garbage collection of field hashes,
       so it will be invoked with a functional object and will continue	to

       It is not desirable to import the functions "fieldhash" and/or
       "fieldhashes" into every	class that is going to use them.  They are
       only used once to set up	the class.  When the class is up and running,
       these functions serve no	more purpose.

       If there	are only a few field hashes to declare,	it is simplest to

	   use Hash::Util::FieldHash;

       early and call the functions qualified:

	   Hash::Util::FieldHash::fieldhash my %foo;

       Otherwise, import the functions into a convenient package like "HUF"
       or, more	general, "Aux"

	       package Aux;
	       use Hash::Util::FieldHash ':all';

       and call

	   Aux::fieldhash my %foo;

       as needed.

   Garbage-Collected Hashes
       Garbage collection in a field hash means	that entries will
       "spontaneously" disappear when the object that created them disappears.
       That must be borne in mind, especially when looping over	a field	hash.
       If anything you do inside the loop could	cause an object	to go out of
       scope, a	random key may be deleted from the hash	you are	looping	over.
       That can	throw the loop iterator, so it's best to cache a consistent
       snapshot	of the keys and/or values and loop over	that.  You will	still
       have to check that a cached entry still exists when you get to it.

       Garbage collection can be confusing when	keys are created in a field
       hash from normal	scalars	as well	as references.	Once a reference is
       used with a field hash, the entry will be collected, even if it was
       later overwritten with a	plain scalar key (every	positive integer is a
       candidate).  This is true even if the original entry was	deleted	in the
       meantime.  In fact, deletion from a field hash, and also	a test for
       existence constitute use	in this	sense and create a liability to	delete
       the entry when the reference goes out of	scope.	If you happen to
       create an entry with an identical key from a string or integer, that
       will be collected instead.  Thus, mixed use of references and plain
       scalars as field	hash keys is not entirely supported.

       The examples show a very	simple class that implements a name,
       consisting of a first and last name (no middle initial).	 The name
       class has four methods:

       o   "init()"

	   An object method that initializes the first and last	name to	its
	   two arguments. If called as a class method, "init()"	creates	an
	   object in the given class and initializes that.

       o   "first()"

	   Retrieve the	first name

       o   "last()"

	   Retrieve the	last name

       o   "name()"

	   Retrieve the	full name, the first and last name joined by a blank.

       The examples show this class implemented	with different levels of
       support by "Hash::Util::FieldHash".  All	supported combinations are
       shown.  The difference between implementations is often quite small.
       The implementations are:

       o   "Name_hash"

	   A conventional (not inside-out) implementation where	an object is a
	   hash	that stores the	field values, without support by
	   "Hash::Util::FieldHash".  This implementation doesn't allow
	   arbitrary inheritance.

       o   "Name_id"

	   Inside-out implementation based on the "id()" function.  It needs a
	   "DESTROY" method.  For thread support a "CLONE" method (not shown)
	   would also be needed.  Instead of "Hash::Util::FieldHash::id()" the
	   function "Scalar::Util::refaddr" could be used with very little
	   functional difference.  This	is the basic pattern of	an inside-out

       o   "Name_idhash"

	   Idhash-based	inside-out implementation.  Like "Name_id" it needs a
	   "DESTROY" method and	would need "CLONE" for thread support.

       o   "Name_id_reg"

	   Inside-out implementation based on the "id()" function with
	   explicit object registry.  No destructor is needed and objects are
	   thread safe.

       o   "Name_idhash_reg"

	   Idhash-based	inside-out implementation with explicit	object
	   registry.  No destructor is needed and objects are thread safe.

       o   "Name_fieldhash"

	   FieldHash-based inside-out implementation.  Object registry happens
	   automatically.  No destructor is needed and objects are thread

       These examples are realized in the code below, which could be copied to
       a file

   Example 1
	   use strict; use warnings;

	       package Name_hash;  # standard implementation: the
				   # object is a hash
	       sub init	{
		   my $obj = shift;
		   my ($first, $last) =	@_;
		   # create an object if called	as class method
		   $obj	= bless	{}, $obj unless	ref $obj;
		   $obj->{ first} = $first;
		   $obj->{ last} = $last;

	       sub first { shift()->{ first} }
	       sub last	{ shift()->{ last} }

	       sub name	{
		   my $n = shift;
		   join	' ' => $n->first, $n->last;


	       package Name_id;
	       use Hash::Util::FieldHash qw(id);

	       my (%first, %last);

	       sub init	{
		   my $obj = shift;
		   my ($first, $last) =	@_;
		   # create an object if called	as class method
		   $obj	= bless	\ my $o, $obj unless ref $obj;
		   $first{ id $obj} = $first;
		   $last{ id $obj} = $last;

	       sub first { $first{ id shift()} }
	       sub last	{ $last{ id shift()} }

	       sub name	{
		   my $n = shift;
		   join	' ' => $n->first, $n->last;

	       sub DESTROY {
		   my $id = id shift;
		   delete $first{ $id};
		   delete $last{ $id};


	       package Name_idhash;
	       use Hash::Util::FieldHash;

	       Hash::Util::FieldHash::idhashes(	\ my (%first, %last) );

	       sub init	{
		   my $obj = shift;
		   my ($first, $last) =	@_;
		   # create an object if called	as class method
		   $obj	= bless	\ my $o, $obj unless ref $obj;
		   $first{ $obj} = $first;
		   $last{ $obj}	= $last;

	       sub first { $first{ shift()} }
	       sub last	{ $last{ shift()} }

	       sub name	{
		   my $n = shift;
		   join	' ' => $n->first, $n->last;

	       sub DESTROY {
		   my $n = shift;
		   delete $first{ $n};
		   delete $last{ $n};


	       package Name_id_reg;
	       use Hash::Util::FieldHash qw(id register);

	       my (%first, %last);

	       sub init	{
		   my $obj = shift;
		   my ($first, $last) =	@_;
		   # create an object if called	as class method
		   $obj	= bless	\ my $o, $obj unless ref $obj;
		   register( $obj, \ (%first, %last) );
		   $first{ id $obj} = $first;
		   $last{ id $obj} = $last;

	       sub first { $first{ id shift()} }
	       sub last	{ $last{ id shift()} }

	       sub name	{
		   my $n = shift;
		   join	' ' => $n->first, $n->last;

	       package Name_idhash_reg;
	       use Hash::Util::FieldHash qw(register);

	       Hash::Util::FieldHash::idhashes \ my (%first, %last);

	       sub init	{
		   my $obj = shift;
		   my ($first, $last) =	@_;
		   # create an object if called	as class method
		   $obj	= bless	\ my $o, $obj unless ref $obj;
		   register( $obj, \ (%first, %last) );
		   $first{ $obj} = $first;
		   $last{ $obj}	= $last;

	       sub first { $first{ shift()} }
	       sub last	{ $last{ shift()} }

	       sub name	{
		   my $n = shift;
		   join	' ' => $n->first, $n->last;

	       package Name_fieldhash;
	       use Hash::Util::FieldHash;

	       Hash::Util::FieldHash::fieldhashes \ my (%first,	%last);

	       sub init	{
		   my $obj = shift;
		   my ($first, $last) =	@_;
		   # create an object if called	as class method
		   $obj	= bless	\ my $o, $obj unless ref $obj;
		   $first{ $obj} = $first;
		   $last{ $obj}	= $last;

	       sub first { $first{ shift()} }
	       sub last	{ $last{ shift()} }

	       sub name	{
		   my $n = shift;
		   join	' ' => $n->first, $n->last;


       To exercise the various implementations the script below	can be used.

       It sets up a class "Name" that is a mirror of one of the	implementation
       classes "Name_hash", "Name_id", ..., "Name_fieldhash".  That determines
       which implementation is run.

       The script first	verifies the function of the "Name" class.

       In the second step, the free inheritability of the implementation (or
       lack thereof) is	demonstrated.  For this	purpose	it constructs a	class
       called "NamedFile" which	is a common subclass of	"Name" and the
       standard	class "IO::File".  This	puts inheritability to the test
       because objects of "IO::File" must be globrefs.	Objects	of "NamedFile"
       should behave like a file opened	for reading and	also support the
       "name()"	method.	 This class juncture works with	exception of the
       "Name_hash" implementation, where object	initialization fails because
       of the incompatibility of object	bodies.

   Example 2
	   use strict; use warnings; $|	= 1;

	   use Example;

	       package Name;
	       use parent 'Name_id';  #	define here which implementation to run

	   # Verify that the base package works
	   my $n = Name->init(qw(Albert	Einstein));
	   print $n->name, "\n";
	   print "\n";

	   # Create a named file handle	(See definition	below)
	   my $nf = NamedFile->init(qw(/tmp/x Filomena File));
	   # use as a file handle...
	   for ( 1 .. 3	) {
	       my $l = <$nf>;
	       print "line $_: $l";
	   # ...and as a Name object
	   print "...brought to	you by ", $nf->name, "\n";

	   # Definition	of NamedFile
	   package NamedFile;
	   use parent 'Name';
	   use parent 'IO::File';

	   sub init {
	       my $obj = shift;
	       my ($file, $first, $last) = @_;
	       $obj = $obj->IO::File::new() unless ref $obj;
	       $obj->open($file) or die	"Can't read '$file': $!";
	       $obj->Name::init($first,	$last);

       To make "Hash::Util::FieldHash" work, there were	two changes to perl
       itself.	"PERL_MAGIC_uvar" was made available for hashes, and weak
       references now call uvar	"get" magic after a weakref has	been cleared.
       The first feature is used to make field hashes intercept	their keys
       upon access.  The second	one triggers garbage collection.

   The "PERL_MAGIC_uvar" interface for hashes
       "PERL_MAGIC_uvar" get magic is called from "hv_fetch_common" and
       "hv_delete_common" through the function "hv_magic_uvar_xkey", which
       defines the interface.  The call	happens	for hashes with	"uvar" magic
       if the "ufuncs" structure has equal values in the "uf_val" and "uf_set"
       fields.	Hashes are unaffected if (and as long as) these	fields hold
       different values.

       Upon the	call, the "mg_obj" field will hold the hash key	to be
       accessed.  Upon return, the "SV*" value in "mg_obj" will	be used	in
       place of	the original key in the	hash access.  The integer index	value
       in the first parameter will be the "action" value from
       "hv_fetch_common", or -1	if the call is from "hv_delete_common".

       This is a template for a	function suitable for the "uf_val" field in a
       "ufuncs"	structure for this call.  The "uf_set" and "uf_index" fields
       are irrelevant.

	   IV watch_key(pTHX_ IV action, SV* field) {
	       MAGIC* mg = mg_find(field, PERL_MAGIC_uvar);
	       SV* keysv = mg->mg_obj;
	       /* Do whatever you need to.  If you decide to
		  supply a different key newkey, return	it like	this
	       mg->mg_obj = newkey;
	       return 0;

   Weakrefs call uvar magic
       When a weak reference is	stored in an "SV" that has "uvar" magic, "set"
       magic is	called after the reference has gone stale.  This hook can be
       used to trigger further garbage-collection activities associated	with
       the referenced object.

   How field hashes work
       The three features of key hashes, key replacement, thread support, and
       garbage collection are supported	by a data structure called the object
       registry.  This is a private hash where every object is stored.	An
       "object"	in this	sense is any reference (blessed	or unblessed) that has
       been used as a field hash key.

       The object registry keeps track of references that have been used as
       field hash keys.	 The keys are generated	from the reference address
       like in a field hash (though the	registry isn't a field hash).  Each
       value is	a weak copy of the original reference, stored in an "SV" that
       is itself magical ("PERL_MAGIC_uvar" again).  The magical structure
       holds a list (another hash, really) of field hashes that	the reference
       has been	used with.  When the weakref becomes stale, the	magic is
       activated and uses the list to delete the reference from	all field
       hashes it has been used with.  After that, the entry is removed from
       the object registry itself.  Implicitly,	that frees the magic structure
       and the storage it has been using.

       Whenever	a reference is used as a field hash key, the object registry
       is checked and a	new entry is made if necessary.	 The field hash	is
       then added to the list of fields	this reference has used.

       The object registry is also used	to repair a field hash after thread
       cloning.	 Here, the entire object registry is processed.	 For every
       reference found there, the field	hashes it has used are visited and the
       entry is	updated.

   Internal function Hash::Util::FieldHash::_fieldhash
	   # test if %hash is a	field hash
	   my $result =	_fieldhash \ %hash, 0;

	   # make %hash	a field	hash
	   my $result =	_fieldhash \ %hash, 1;

       "_fieldhash" is the internal function used to create field hashes.  It
       takes two arguments, a hashref and a mode.  If the mode is boolean
       false, the hash is not changed but tested if it is a field hash.	 If
       the hash	isn't a	field hash the return value is boolean false.  If it
       is, the return value indicates the mode of field	hash.  When called
       with a boolean true mode, it turns the given hash into a	field hash of
       this mode, returning the	mode of	the created field hash.	 "_fieldhash"
       does not	erase the given	hash.

       Currently there is only one type	of field hash, and only	the boolean
       value of	the mode makes a difference, but that may change.

       Anno Siegel (ANNO) wrote	the xs code and	the changes in perl proper
       Jerry Hedden (JDHEDDEN) made it faster

       Copyright (C) 2006-2007 by (Anno	Siegel)

       This library is free software; you can redistribute it and/or modify it
       under the same terms as Perl itself, either Perl	version	5.8.7 or, at
       your option, any	later version of Perl 5	you may	have available.

perl v5.28.3			  2020-05-14	      Hash::Util::FieldHash(3)


Want to link to this manual page? Use this URL:

home | help