Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
File::Copy(3)	       Perl Programmers	Reference Guide		 File::Copy(3)

NAME
       File::Copy - Copy files or filehandles

SYNOPSIS
	       use File::Copy;

	       copy("sourcefile","destinationfile") or die "Copy failed: $!";
	       copy("Copy.pm",\*STDOUT);
	       move("/dev1/sourcefile","/dev2/destinationfile");

	       use File::Copy "cp";

	       $n = FileHandle->new("/a/file","r");
	       cp($n,"x");

DESCRIPTION
       The File::Copy module provides two basic	functions, "copy" and "move",
       which are useful	for getting the	contents of a file from	one place to
       another.

       copy
	   The "copy" function takes two parameters: a file to copy from and a
	   file	to copy	to. Either argument may	be a string, a FileHandle
	   reference or	a FileHandle glob. Obviously, if the first argument is
	   a filehandle	of some	sort, it will be read from, and	if it is a
	   file	name it	will be	opened for reading. Likewise, the second
	   argument will be written to.	If the second argument does not	exist
	   but the parent directory does exist,	then it	will be	created.
	   Trying to copy a file into a	non-existent directory is an error.
	   Trying to copy a file on top	of itself is also an error.  "copy"
	   will	not overwrite read-only	files.

	   If the destination (second argument)	already	exists and is a
	   directory, and the source (first argument) is not a filehandle,
	   then	the source file	will be	copied into the	directory specified by
	   the destination, using the same base	name as	the source file.  It's
	   a failure to	have a filehandle as the source	when the destination
	   is a	directory.

	   Note	that passing in	files as handles instead of names may lead to
	   loss	of information on some operating systems; it is	recommended
	   that	you use	file names whenever possible.  Files are opened	in
	   binary mode where applicable.  To get a consistent behaviour	when
	   copying from	a filehandle to	a file,	use "binmode" on the
	   filehandle.

	   An optional third parameter can be used to specify the buffer size
	   used	for copying. This is the number	of bytes from the first	file,
	   that	will be	held in	memory at any given time, before being written
	   to the second file. The default buffer size depends upon the	file,
	   but will generally be the whole file	(up to 2MB), or	1k for
	   filehandles that do not reference files (eg.	sockets).

	   You may use the syntax "use File::Copy "cp""	to get at the "cp"
	   alias for this function. The	syntax is exactly the same.  The
	   behavior is nearly the same as well:	as of version 2.15, "cp" will
	   preserve the	source file's permission bits like the shell utility
	   cp(1) would do, while "copy"	uses the default permissions for the
	   target file (which may depend on the	process' "umask", file
	   ownership, inherited	ACLs, etc.).  If an error occurs in setting
	   permissions,	"cp" will return 0, regardless of whether the file was
	   successfully	copied.

       move
	   The "move" function also takes two parameters: the current name and
	   the intended	name of	the file to be moved.  If the destination
	   already exists and is a directory, and the source is	not a
	   directory, then the source file will	be renamed into	the directory
	   specified by	the destination.

	   If possible,	move() will simply rename the file.  Otherwise,	it
	   copies the file to the new location and deletes the original.  If
	   an error occurs during this copy-and-delete process,	you may	be
	   left	with a (possibly partial) copy of the file under the
	   destination name.

	   You may use the "mv"	alias for this function	in the same way	that
	   you may use the "cp"	alias for "copy".

       syscopy
	   File::Copy also provides the	"syscopy" routine, which copies	the
	   file	specified in the first parameter to the	file specified in the
	   second parameter, preserving	OS-specific attributes and file
	   structure.  For Unix	systems, this is equivalent to the simple
	   "copy" routine, which doesn't preserve OS-specific attributes.  For
	   VMS systems,	this calls the "rmscopy" routine (see below).  For
	   OS/2	systems, this calls the	"syscopy" XSUB directly. For Win32
	   systems, this calls "Win32::CopyFile".

	   Special behaviour if	"syscopy" is defined (OS/2, VMS	and Win32):

	   If both arguments to	"copy" are not file handles, then "copy" will
	   perform a "system copy" of the input	file to	a new output file, in
	   order to preserve file attributes, indexed file structure, etc.
	   The buffer size parameter is	ignored.  If either argument to	"copy"
	   is a	handle to an opened file, then data is copied using Perl
	   operators, and no effort is made to preserve	file attributes	or
	   record structure.

	   The system copy routine may also be called directly under VMS and
	   OS/2	as "File::Copy::syscopy" (or under VMS as
	   "File::Copy::rmscopy", which	is the routine that does the actual
	   work	for syscopy).

       rmscopy($from,$to[,$date_flag])
	   The first and second	arguments may be strings, typeglobs, typeglob
	   references, or objects inheriting from IO::Handle; they are used in
	   all cases to	obtain the filespec of the input and output files,
	   respectively.  The name and type of the input file are used as
	   defaults for	the output file, if necessary.

	   A new version of the	output file is always created, which inherits
	   the structure and RMS attributes of the input file, except for
	   owner and protections (and possibly timestamps; see below).	All
	   data	from the input file is copied to the output file; if either of
	   the first two parameters to "rmscopy" is a file handle, its
	   position is unchanged.  (Note that this means a file	handle
	   pointing to the output file will be associated with an old version
	   of that file	after "rmscopy"	returns, not the newly created
	   version.)

	   The third parameter is an integer flag, which tells "rmscopy" how
	   to handle timestamps.  If it	is < 0,	none of	the input file's
	   timestamps are propagated to	the output file.  If it	is > 0,	then
	   it is interpreted as	a bitmask: if bit 0 (the LSB) is set, then
	   timestamps other than the revision date are propagated; if bit 1 is
	   set,	the revision date is propagated.  If the third parameter to
	   "rmscopy" is	0, then	it behaves much	like the DCL COPY command: if
	   the name or type of the output file was explicitly specified, then
	   no timestamps are propagated, but if	they were taken	implicitly
	   from	the input filespec, then all timestamps	other than the
	   revision date are propagated.  If this parameter is not supplied,
	   it defaults to 0.

	   "rmscopy" is	VMS specific and cannot	be exported; it	must be
	   referenced by its full name,	e.g.:

	     File::Copy::rmscopy($from,	$to) or	die $!;

	   Like	"copy",	"rmscopy" returns 1 on success.	 If an error occurs,
	   it sets $!, deletes the output file,	and returns 0.

RETURN
       All functions return 1 on success, 0 on failure.	 $! will be set	if an
       error was encountered.

NOTES
       Before calling copy() or	move() on a filehandle,	the caller should
       close or	flush()	the file to avoid writes being lost. Note that this is
       the case	even for move(), because it may	actually copy the file,
       depending on the	OS-specific inplementation, and	the underlying
       filesystem(s).

AUTHOR
       File::Copy was written by Aaron Sherman _ajs@ajs.com_ in	1995, and
       updated by Charles Bailey _bailey@newman.upenn.edu_ in 1996.

perl v5.26.0			  2017-04-19			 File::Copy(3)

NAME | SYNOPSIS | DESCRIPTION | RETURN | NOTES | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=File::Copy&sektion=3&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help