Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
DS2506(3)		     One-Wire File System		     DS2506(3)

NAME
       DS2506,	DS2506-UNW  -  Add-Only	 Memory	(64 kBit), UniqueWare Add-Only
       Memory (64 kBit)

       DS1986, DS1986U
	      -	Add-Only iButton (64 kBit), UniqueWare iButton (64 kBit)

SYNOPSIS
       EPROM add-only memory.

       0F [.]XXXXXXXXXXXX[XX][/[ memory	| pages/page.[0-255|ALL] |  address  |
       crc8 | id | locator | r_address | r_id |	r_locator | type ]]

       8F  [.]XXXXXXXXXXXX[XX][/[  memory | pages/page.[0-255|ALL] | address |
	      crc8 | id	| locator | r_address |	r_id | r_locator | type	]]

FAMILY CODE
       0F     DS2506 DS1986

       8F     DS2506-UNW DS1986U

SPECIAL	PROPERTIES
   memory
       read-write, binary
       8192 bytes of memory. Initially all bits	are set	 to  1.	 Writing  zero
       permanently alters the memory.

   pages/page.0	... pages/page.255 pages/page.ALL
       read-write, yes-no
       Memory  is  split into 256 pages	of 32 bytes each.  ALL is an aggregate
       of the pages. Each page is accessed sequentially.

STANDARD PROPERTIES
   address
   r_address
       read-only, ascii
       The entire 64-bit unique	ID. Given as  upper  case  hexidecimal	digits
       (0-9A-F).
       address starts with the family code
       r address is the	address	in reverse order, which	is often used in other
       applications and	labeling.

   crc8
       read-only, ascii
       The 8-bit error correction portion. Uses	cyclic redundancy check.  Com-
       puted  from the preceding 56 bits of the	unique ID number. Given	as up-
       per case	hexidecimal digits (0-9A-F).

   family
       read-only, ascii
       The 8-bit family	code. Unique to	each type of device.  Given  as	 upper
       case hexidecimal	digits (0-9A-F).

   id
   r_id
       read-only, ascii
       The 48-bit middle portion of the	unique ID number. Does not include the
       family code or CRC. Given as upper case hexidecimal digits (0-9A-F).
       r id is the id in reverse order,	which is often used in other  applica-
       tions and labeling.

   locator
   r_locator
       read-only, ascii
       Uses  an	 extension  of the 1-wire design from iButtonLink company that
       associated 1-wire physical connections with a unique  1-wire  code.  If
       the  connection is behind a Link	Locator	the locator will show a	unique
       8-byte number (16 character hexidecimal)	starting with family code FE.
       If no Link Locator is between the device	and the	 master,  the  locator
       field will be all FF.
       r locator is the	locator	in reverse order.

   present (DEPRECATED)
       read-only, yes-no
       Is the device currently present on the 1-wire bus?

   type
       read-only, ascii
       Part  name  assigned by Dallas Semi. E.g.  DS2401 Alternative packaging
       (iButton	vs chip) will not be distiguished.

ALARMS
       None.

DESCRIPTION
   1-Wire
       1-wire is a wiring protocol and series of devices designed and manufac-
       tured  by  Dallas  Semiconductor, Inc. The bus is a low-power low-speed
       low-connector scheme where the data line	can also provide power.

       Each device is uniquely and unalterably	numbered  during  manufacture.
       There  are a wide variety of devices, including memory, sensors (humid-
       ity, temperature, voltage, contact, current), switches, timers and data
       loggers.	 More complex devices (like thermocouple sensors) can be built
       with these basic	devices. There are also	1-wire devices that  have  en-
       cryption	included.

       The  1-wire  scheme uses	a single bus master and	multiple slaves	on the
       same wire. The bus master initiates all communication. The  slaves  can
       be individually discovered and addressed	using their unique ID.

       Bus  masters come in a variety of configurations	including serial, par-
       allel, i2c, network or USB adapters.

   OWFS	design
       OWFS is a suite of programs that	designed to make the  1-wire  bus  and
       its  devices  easily accessible.	The underlying priciple	is to create a
       virtual filesystem, with	the unique ID being the	directory, and the in-
       dividual	 properties of the device are represented as simple files that
       can be read and written.

       Details of the individual slave or master design	are  hidden  behind  a
       consistent interface. The goal is to provide an easy set	of tools for a
       software	designer to create monitoring or control  applications.	 There
       are some	performance enhancements in the	implementation,	including data
       caching,	parallel access	to bus masters,	and aggregation	of device com-
       munication.  Still the fundemental goal has been	ease of	use, flexibil-
       ity and correctness rather than speed.

   DS2506 DS1986
       The DS2506 (3) is used for write-once incremental  storage.  It's  main
       advantage is for	audit trails (i.e. a digital purse).

       The  DS2506-UNW	is one of the UniqueWare class of devices. Some	of the
       memory  was  preprogramed  at  the  factory.  See  the  datasheet   for
       specifics. The DS2502 , DS2505 ,	and DS2506 differ in their function by
       the amount of on-board memory they possess. (The	internal protocols are
       slightly	different, but the OWFS	system handles this automatically.

ADDRESSING
       All  1-wire  devices are	factory	assigned a unique 64-bit address. This
       address is of the form:

       Family Code
	      8	bits

       Address
	      48 bits

       CRC    8	bits

       Addressing under	OWFS is	in hexidecimal,	of form:

	      01.123456789ABC

       where 01	is an example 8-bit family code, and 12345678ABC is an example
       48 bit address.

       The  dot	 is  optional,	and the	CRC code can included. If included, it
       must be correct.

DATASHEET
       http://pdfserv.maxim-ic.com/en/ds/DS2506.pdf
       http://pdfserv.maxim-ic.com/en/ds/DS2502-UNW-DS2506S-UNW.pdf
       http://pdfserv.maxim-ic.com/en/ds/DS1986-F3-DS1986-F5.pdf
       http://pdfserv.maxim-ic.com/en/ds/DS1982U-DS1986U.pdf

SEE ALSO
   Programs
       owfs (1)	owhttpd	(1) owftpd (1)	owserver  (1)  owdir  (1)  owread  (1)
       owwrite (1) owpresent (1) owtap (1)

   Configuration and testing
       owfs (5)	owtap (1) owmon	(1)

   Language bindings
       owtcl (3) owperl	(3) owcapi (3)

   Clocks
       DS1427  (3)  DS1904(3)  DS1994  (3)  DS2404  (3)	DS2404S	(3) DS2415 (3)
       DS2417 (3)

   ID
       DS2401 (3) DS2411 (3) DS1990A (3)

   Memory
       DS1982 (3) DS1985 (3) DS1986 (3)	 DS1991	 (3)  DS1992  (3)  DS1993  (3)
       DS1995  (3)  DS1996  (3)	 DS2430A  (3) DS2431 (3) DS2433	(3) DS2502 (3)
       DS2506 (3) DS28E04 (3) DS28EC20 (3)

   Switches
       DS2405 (3) DS2406 (3) DS2408 (3)	DS2409 (3) DS2413 (3) DS28EA00 (3)

   Temperature
       DS1822 (3) DS1825 (3) DS1820 (3)	DS18B20	(3)  DS18S20  (3)  DS1920  (3)
       DS1921  (3) DS1821 (3) DS28EA00 (3) DS28E04 (3) EDS0064 (3) EDS0065 (3)
       EDS0066 (3) EDS0067 (3) EDS0068 (3) EDS0071 (3)	EDS0072	 (3)  MAX31826
       (3)

   Humidity
       DS1922 (3) DS2438 (3) EDS0065 (3) EDS0068 (3)

   Voltage
       DS2450 (3)

   Resistance
       DS2890 (3)

   Multifunction (current, voltage, temperature)
       DS2436  (3)  DS2437  (3)	 DS2438	 (3)  DS2751 (3) DS2755	(3) DS2756 (3)
       DS2760 (3) DS2770 (3) DS2780 (3)	DS2781 (3) DS2788 (3) DS2784 (3)

   Counter
       DS2423 (3)

   LCD Screen
       LCD (3) DS2408 (3)

   Crypto
       DS1977 (3)

   Pressure
       DS2406 (3) TAI8570 EDS0066 (3) EDS0068 (3)

   Moisture
       EEEF (3)	DS2438 (3)

AVAILABILITY
       http://www.owfs.org

AUTHOR
       Paul Alfille (paul.alfille@gmail.com)

OWFS Manpage			     2003			     DS2506(3)

NAME | SYNOPSIS | FAMILY CODE | SPECIAL PROPERTIES | STANDARD PROPERTIES | ALARMS | DESCRIPTION | ADDRESSING | DATASHEET | SEE ALSO | AVAILABILITY | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=DS2506&sektion=3&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help