Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
CMSG_DATA(3), CMSG_FIRSTHDR(3), CMSG_LEN(3), CMSG_NXTHDR(3), CMSG_SPACE(3)
socket control message routines for ancillary data access
PCBGROUP(9)
Distributed Protocol Control Block Groups
Q_SIGNSHFT(3), Q_SSIGN(3), Q_CRAWMASK(3), Q_SRAWMASK(3), Q_GCRAW(3), Q_GCVAL(3), Q_SCVAL(3)
fixed-point math functions which manipulate the control/sign data bits
VOP_ACLCHECK(9)
check an access control list for a vnode
VOP_GETACL(9)
retrieve access control list for a vnode
VOP_IOCTL(9)
device specific control
VOP_SETACL(9)
set the access control list for a vnode
aac(4)
Adaptec AdvancedRAID Controller driver
aacraid(4)
Adaptec AACRAID Controller driver
acl(9)
virtual file system access control lists
acpi_sony(4)
ACPI notebook controller driver for Sony laptops
acpiconf(8)
control ACPI power management
ae(4)
Attansic/Atheros L2 FastEthernet controller driver
ahci(4)
Serial ATA Advanced Host Controller Interface driver
alpm(4)
Acer Aladdin 15x3 Power Management controller driver
amdpm(4)
AMD 756/766/768/8111 Power Management controller driver
amdsmb(4)
AMD-8111 SMBus 2.0 controller driver
ancontrol(8)
configure Aironet 4500/4800 devices
apic(4)
Advanced Programmable Interrupt Controller (APIC) driver
apm(8)
control the APM BIOS and display its information
archive_entry_acl_add_entry(3), archive_entry_acl_add_entry_w(3), archive_entry_acl_clear(3), archive_entry_acl_count(3), archive_entry_acl_from_text(3), archive_entry_acl_from_text_w(3), archive_entry_acl_next(3), archive_entry_acl_reset(3), archive_entry_acl_to_text(3), archive_entry_acl_to_text_w(3), archive_entry_acl_types(3)
functions for manipulating Access Control Lists in archive entry descriptions
archive_read_set_filter_option(3), archive_read_set_format_option(3), archive_read_set_option(3), archive_read_set_options(3)
functions controlling options for reading archives
archive_write_set_filter_option(3), archive_write_set_format_option(3), archive_write_set_option(3), archive_write_set_options(3)
functions controlling options for writing archives
arcmsr(4)
Areca RAID Controller driver
arp(8)
address resolution display and control
asa(1)
interpret carriage-control characters
asmc(4)
device driver for the Apple System Management Controller (SMC)
ata(4)
generic ATA/SATA controller driver
atkbdc(4)
the AT keyboard controller interface
attr_get(3), wattr_get(3), attr_set(3), wattr_set(3), attr_off(3), wattr_off(3), attr_on(3), wattr_on(3), attroff(3), wattroff(3), attron(3), wattron(3), attrset(3), wattrset(3), chgat(3), wchgat(3), mvchgat(3), mvwchgat(3), color_set(3), wcolor_set(3), standend(3), wstandend(3), standout(3), wstandout(3)
curses character and window attribute control routines
audit_control(5)
audit system parameters
bhyvectl(8)
control utility for bhyve instances
bthidcontrol(8)
Bluetooth HID control utility
bytgpio(4)
Intel Bay Trail SoC GPIO controller
camcontrol(8)
CAM control program
cc_cdg(4)
CDG Congestion Control Algorithm
cc_chd(4)
CHD Congestion Control Algorithm
cc_cubic(4)
CUBIC Congestion Control Algorithm
cc_dctcp(4)
DCTCP Congestion Control Algorithm
cc_hd(4)
HD Congestion Control Algorithm
cc_htcp(4)
H-TCP Congestion Control Algorithm
cc_newreno(4)
NewReno Congestion Control Algorithm
cc_vegas(4)
Vegas Congestion Control Algorithm
cdcontrol(1)
compact disc control utility
chio(1)
medium changer control utility
chvgpio(4)
Intel Cherry View SoC GPIO controller
comcontrol(8)
control a special tty device
conscontrol(8)
control physical console devices
cpucontrol(8)
control utility for the cpuctl(4) device
cpufreq(4)
CPU frequency control framework
ctladm(8)
CAM Target Layer control utility
daemon(8)
run detached from the controlling terminal
devctl(3), devctl_attach(3), devctl_clear_driver(3), devctl_delete(3), devctl_detach(3), devctl_disable(3), devctl_enable(3), devctl_freeze(3), devctl_rescan(3), devctl_reset(3), devctl_resume(3), devctl_set_driver(3), devctl_suspend(3), devctl_thaw(3)
device control library
devctl(4)
device event reporting and device control interface
devctl(8)
device control utility
devfs(8)
DEVFS control
ehci(4)
USB Enhanced Host Controller driver
elf_cntl(3)
control an elf file descriptor
elfctl(1)
change an ELF binary's feature control note
esp(4)
Emulex ESP, NCR 53C9x and QLogic FAS families based SCSI controllers
fcntl(2)
file control
fdc(4)
PC architecture floppy disk controller driver
fdcontrol(8)
display and modify floppy disk parameters
fdt_pinctrl(9)
helper functions for FDT pinmux controller drivers
feclearexcept(3), fegetexceptflag(3), feraiseexcept(3), fesetexceptflag(3), fetestexcept(3), fegetround(3), fesetround(3), fegetenv(3), feholdexcept(3), fesetenv(3), feupdateenv(3), feenableexcept(3), fedisableexcept(3), fegetexcept(3)
floating-point environment control
fegetround(3), fesetround(3)
floating-point rounding control
flowctl(8)
ng_netflow(4) control utility
form_field_attributes(3)
color and attribute control for form fields
form_field_buffer(3)
field buffer control
fwcontrol(8)
FireWire control utility
g_access(9)
control access to GEOM consumers and their providers
g_new_bio(9), g_clone_bio(9), g_destroy_bio(9), g_format_bio(9), g_print_bio(9), g_reset_bio(9)
GEOM bio controlling functions
gcache(8)
control utility for CACHE GEOM class
gconcat(8)
disk concatenation control utility
geli(8)
control utility for the cryptographic GEOM class
geom(8)
universal control utility for GEOM classes
getrlimit(2), setrlimit(2)
control maximum system resource consumption
ggatec(8)
GEOM Gate network client and control utility
ggatel(8)
GEOM Gate local control utility
gjournal(8)
control utility for journaled devices
glabel(8)
disk labelization control utility
gmirror(8)
control utility for mirrored devices
gmountver(8)
control utility for disk mount verification GEOM class
gmultipath(8)
disk multipath control utility
gnop(8)
control utility for NOP GEOM class
gpart(8)
control utility for the disk partitioning GEOM class
gpioctl(8)
GPIO control utility
graid(8)
control utility for software RAID devices
graid3(8)
control utility for RAID3 devices
gshsec(8)
control utility for shared secret devices
gstripe(8)
control utility for striped devices
gvinum(8)
Logical Volume Manager control program
gvirstor(8)
control utility for virtual data storage devices
hastctl(8)
Highly Available Storage control utility
hccontrol(8)
Bluetooth HCI configuration utility
hcons(4)
HID consumer page controls driver
hcsecd(8)
control link keys and PIN codes for Bluetooth devices
hgame(4)
Generic HID game controller (joystick/gamepad) driver
hosts_access(3), hosts_ctl(3), request_init(3), request_set(3)
access control library
hosts_access(5)
format of host access control files
hosts_options(5)
host access control language extensions
hsctrl(4)
HID system controls driver
ichsmb(4)
Intel ICH SMBus controller driver
icmp(4)
Internet Control Message Protocol
icmp6(4)
Internet Control Message Protocol for IPv6
iconvctl(3)
controlling and diagnostical facility for iconv(3)
ida(4)
Compaq Intelligent Drive Array Controllers
ieee80211_amrr(9)
802.11 network driver transmit rate control support
ig4(4)
Synopsys DesignWare I2C Controller
igc(4)
Intel Ethernet Controller I225 driver
iic_gpiomux(4)
driver for I2C mux hardware controlled via GPIO
iir(4)
Intel Integrated RAID controller and ICP Vortex driver
imcsmb(4)
Intel integrated Memory Controller (iMC) SMBus controller driver
init(8)
process control initialization
intpm(4)
Intel PIIX4 Power Management controller driver
ioctl(2)
control device
ips(4)
IBM/Adaptec ServeRAID controller driver
iscntrl(3)
control character test
iscontrol(8)
login/negotiator/control for an iSCSI initiator session
kbdcontrol(1)
keyboard control and configuration utility
kbdmap(5)
keyboard map file format for kbdcontrol
l2control(8)
L2CAP configuration utility
local-unbound-control(8), local-unbound-control-setup(8)
Local-unbound remote server control utility
login.access(5)
login access control table
lpc(8)
line printer control program
lptcontrol(8)
a utility for manipulating the lpt printer driver
mac(4)
Mandatory Access Control
mac(9)
TrustedBSD Mandatory Access Control framework
mac_lomac(4)
Low-watermark Mandatory Access Control data integrity policy
mac_portacl(4)
network port access control policy
mac_seeotheruids(4)
simple policy controlling whether users see other users
maclabel(7)
Mandatory Access Control label format
mdconfig(8)
create and control memory disks
memcontrol(8)
control system cache behaviour with respect to memory
menu_back(3), menu_fore(3), menu_grey(3), menu_pad(3), set_menu_back(3), set_menu_fore(3), set_menu_grey(3), set_menu_pad(3)
color and attribute control for menus
mfiutil(8)
Utility for managing LSI MegaRAID SAS controllers
minherit(2)
control the inheritance of pages
mlxcontrol(8)
Mylex DAC-family RAID management utility
mod_cc(4)
Modular congestion control
mod_cc(9), DECLARE_CC_MODULE(9), CCV(9)
Modular Congestion Control
moncontrol(3), monstartup(3)
control execution profile
mprotect(2)
control the protection of pages
mpsutil(8), mprutil(8)
Utility for managing LSI Fusion-MPT 2/3 controllers
mptutil(8)
Utility for managing LSI Fusion-MPT controllers
mrsas(4)
LSI MegaRAID 6Gb/s and 12Gb/s SAS+SATA RAID controller driver
msgctl(2)
message control operations
mvs(4)
Marvell Serial ATA Host Controller driver
ndp(8)
control/diagnose IPv6 neighbor discovery protocol
nfsmb(4)
NVIDIA nForce2/3/4 SMBus 2.0 controller driver
ng_ccatm(4)
ATM Call Control netgraph node type
ng_hci(4)
Netgraph node type that is also a Bluetooth Host Controller Interface (HCI) layer
ng_l2cap(4)
Netgraph node type that implements Bluetooth Logical Link Control and Adaptation Protocol (L2CAP)
ngctl(8)
netgraph control utility
ntpdc(8)
vendor-specific NTPD control program
nvmecontrol(8)
NVM Express control utility
ohci(4)
OHCI USB Host Controller driver
owc(4)
Dallas Semiconductor 1-Wire Controller
pam_passwdqc(8)
Password quality-control PAM module
pcf(4)
Philips I2C bus controller
pfctl(8)
control the packet filter (PF) device
pfilctl(8)
pfil(9) control utility
pkru(3), Protection Key Rights for User pages(3)
provide fast user-managed key-based access control for pages
pmc_disable(3), pmc_enable(3)
administrative control of hardware performance counters
pmccontrol(8)
control hardware performance monitoring counters
pms(4)
PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 SAS/SATA HBA Controller driver
posixshmcontrol(1)
Control POSIX shared memory segments
powerd(8)
system power control utility
pppctl(8)
PPP control program
proccontrol(1)
Control some process execution aspects
procctl(2)
control processes
profil(2)
control process profiling
pthread_yield(3)
yield control of the current thread
pwmc(4)
PWM (Pulse Width Modulation) control device driver
rpc_clnt_create(3), clnt_control(3), clnt_create(3), clnt_create_timed(3), clnt_create_vers(3), clnt_create_vers_timed(3), clnt_destroy(3), clnt_dg_create(3), clnt_pcreateerror(3), clnt_raw_create(3), clnt_spcreateerror(3), clnt_tli_create(3), clnt_tp_create(3), clnt_tp_create_timed(3), clnt_vc_create(3), rpc_createerr(3)
library routines for dealing with creation and manipulation of CLIENT handles
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_create(3), svc_control(3), svc_create(3), svc_destroy(3), svc_dg_create(3), svc_fd_create(3), svc_raw_create(3), svc_tli_create(3), svc_tp_create(3), svc_vc_create(3)
library routines for the creation of server handles
rtadvctl(8)
control program for rtadvd(8) daemon
rue(4)
RealTek RTL8150 USB to Fast Ethernet controller driver
scc(4)
driver for Serial Communications Controllers (SCC) devices
sctp(4)
Internet Stream Control Transmission Protocol
sdhci(4)
PCI SD Host Controller bridge driver
sdpcontrol(8)
Bluetooth Service Discovery Protocol query utility
semctl(2)
control operations on a semaphore set
service(8)
control (start/stop/etc.) or list system services
setac(3), endac(3), getacdir(3), getacdist(3), getacexpire(3), getacfilesz(3), getacflg(3), getachost(3), getacmin(3), getacna(3), getacpol(3), au_poltostr(3), au_strtopol(3)
look up information from the audit_control database
shmctl(2)
shared memory control
sigfastblock(2)
controls signals blocking with a simple memory write
siis(4)
SiliconImage Serial ATA Host Controller driver
smartpqi(4)
Microsemi smartpqi SCSI driver for PQI controllers
snmp_vacm(3)
View-based Access Control module for bsnmpd(1)
spppcontrol(8)
display or set parameters for an sppp interface
superio(4)
Super I/O controller and bus driver
swapon(2), swapoff(2)
control devices for interleaved paging/swapping
syncache(4), syncookies(4)
sysctl(8) MIBs for controlling TCP SYN caching
sysdecode_ioctlname(3)
lookup name of device control command
syslog(3), vsyslog(3), openlog(3), closelog(3), setlogmask(3)
control system log
tcgetsid(3)
get session ID associated with a controlling terminal
tcp(4)
Internet Transmission Control Protocol
tcpd(8)
access control facility for internet services
tcsendbreak(3), tcdrain(3), tcflush(3), tcflow(3)
line control functions
tcsetsid(3)
set session ID associated with a controlling terminal
touchwin(3), touchline(3), untouchwin(3), wtouchln(3), is_linetouched(3), is_wintouched(3)
curses refresh control routines
twa(4)
3ware 9000/9500/9550/9650 series SATA RAID controllers driver
tws(4)
3ware 9750 SATA+SAS 6Gb/s RAID controller card driver
ugidfw(8)
firewall-like access controls for file system objects
uhci(4)
UHCI USB Host Controller driver
umct(4)
Magic Control Technology USB-RS232 converter driver
ure(4)
RealTek RTL8152/RTL8153 USB to Ethernet controller driver
usbdump(8)
dump traffic on USB host controller
usbhidaction(1)
perform actions according to USB HID controls
uu_lock(3), uu_unlock(3), uu_lockerr(3)
acquire and release control of a serial device
vaccess(9)
generate an access control decision using vnode parameters
vaccess_acl_nfs4(9)
generate a NFSv4 ACL access control decision using vnode parameters
vaccess_acl_posix1e(9)
generate a POSIX.1e ACL access control decision using vnode parameters
viapm(4)
VIA chipsets Power Management controller driver
vidcontrol(1)
system console control and configuration utility
vmx(4)
VMware VMXNET3 Virtual Interface Controller device
watchdog(8)
watchdog control program
xhci(4)
USB eXtensible Host Controller driver
zonectl(8)
Shingled Magnetic Recording Zone Control utility
BIO_ctrl(3), BIO_callback_ctrl(3), BIO_ptr_ctrl(3), BIO_int_ctrl(3), BIO_reset(3), BIO_seek(3), BIO_tell(3), BIO_flush(3), BIO_eof(3), BIO_set_close(3), BIO_get_close(3), BIO_pending(3), BIO_wpending(3), BIO_ctrl_pending(3), BIO_ctrl_wpending(3), BIO_get_info_callback(3), BIO_set_info_callback(3), BIO_info_cb(3), BIO_get_ktls_send(3), BIO_get_ktls_recv(3)
BIO control operations
DTLS_timer_cb(3), DTLS_set_timer_cb(3)
Set callback for controlling DTLS timer duration
EVP_PKEY_CTX_ctrl(3), EVP_PKEY_CTX_ctrl_str(3), EVP_PKEY_CTX_ctrl_uint64(3), EVP_PKEY_CTX_md(3), EVP_PKEY_CTX_set_signature_md(3), EVP_PKEY_CTX_get_signature_md(3), EVP_PKEY_CTX_set_mac_key(3), EVP_PKEY_CTX_set_rsa_padding(3), EVP_PKEY_CTX_get_rsa_padding(3), EVP_PKEY_CTX_set_rsa_pss_saltlen(3), EVP_PKEY_CTX_get_rsa_pss_saltlen(3), EVP_PKEY_CTX_set_rsa_keygen_bits(3), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3), EVP_PKEY_CTX_set_rsa_keygen_primes(3), EVP_PKEY_CTX_set_rsa_mgf1_md(3), EVP_PKEY_CTX_get_rsa_mgf1_md(3), EVP_PKEY_CTX_set_rsa_oaep_md(3), EVP_PKEY_CTX_get_rsa_oaep_md(3), EVP_PKEY_CTX_set0_rsa_oaep_label(3), EVP_PKEY_CTX_get0_rsa_oaep_label(3), EVP_PKEY_CTX_set_dsa_paramgen_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_q_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_md(3), EVP_PKEY_CTX_set_dh_paramgen_prime_len(3), EVP_PKEY_CTX_set_dh_paramgen_subprime_len(3), EVP_PKEY_CTX_set_dh_paramgen_generator(3), EVP_PKEY_CTX_set_dh_paramgen_type(3), EVP_PKEY_CTX_set_dh_rfc5114(3), EVP_PKEY_CTX_set_dhx_rfc5114(3), EVP_PKEY_CTX_set_dh_pad(3), EVP_PKEY_CTX_set_dh_nid(3), EVP_PKEY_CTX_set_dh_kdf_type(3), EVP_PKEY_CTX_get_dh_kdf_type(3), EVP_PKEY_CTX_set0_dh_kdf_oid(3), EVP_PKEY_CTX_get0_dh_kdf_oid(3), EVP_PKEY_CTX_set_dh_kdf_md(3), EVP_PKEY_CTX_get_dh_kdf_md(3), EVP_PKEY_CTX_set_dh_kdf_outlen(3), EVP_PKEY_CTX_get_dh_kdf_outlen(3), EVP_PKEY_CTX_set0_dh_kdf_ukm(3), EVP_PKEY_CTX_get0_dh_kdf_ukm(3), EVP_PKEY_CTX_set_ec_paramgen_curve_nid(3), EVP_PKEY_CTX_set_ec_param_enc(3), EVP_PKEY_CTX_set_ecdh_cofactor_mode(3), EVP_PKEY_CTX_get_ecdh_cofactor_mode(3), EVP_PKEY_CTX_set_ecdh_kdf_type(3), EVP_PKEY_CTX_get_ecdh_kdf_type(3), EVP_PKEY_CTX_set_ecdh_kdf_md(3), EVP_PKEY_CTX_get_ecdh_kdf_md(3), EVP_PKEY_CTX_set_ecdh_kdf_outlen(3), EVP_PKEY_CTX_get_ecdh_kdf_outlen(3), EVP_PKEY_CTX_set0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_get0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_set1_id(3), EVP_PKEY_CTX_get1_id(3), EVP_PKEY_CTX_get1_id_len(3)
algorithm specific control operations
EVP_PKEY_CTX_ctrl(3), EVP_PKEY_CTX_ctrl_str(3), EVP_PKEY_CTX_set_signature_md(3), EVP_PKEY_CTX_set_rsa_padding(3), EVP_PKEY_CTX_set_rsa_pss_saltlen(3), EVP_PKEY_CTX_set_rsa_rsa_keygen_bits(3), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3), EVP_PKEY_CTX_set_dsa_paramgen_bits(3), EVP_PKEY_CTX_set_dh_paramgen_prime_len(3), EVP_PKEY_CTX_set_dh_paramgen_generator(3), EVP_PKEY_CTX_set_ec_paramgen_curve_nid(3)
algorithm specific control operations
SSL_CTX_set_max_send_fragment(3), SSL_set_max_send_fragment(3), SSL_CTX_set_split_send_fragment(3), SSL_set_split_send_fragment(3), SSL_CTX_set_max_pipelines(3), SSL_set_max_pipelines(3), SSL_CTX_set_default_read_buffer_len(3), SSL_set_default_read_buffer_len(3), SSL_CTX_set_tlsext_max_fragment_length(3), SSL_set_tlsext_max_fragment_length(3), SSL_SESSION_get_max_fragment_length(3)
Control fragment size settings and pipelining operations
SSL_set_num_tickets(3), SSL_get_num_tickets(3), SSL_CTX_set_num_tickets(3), SSL_CTX_get_num_tickets(3)
control the number of TLSv1.3 session tickets that are issued
ssl_ct_validation_cb(3), SSL_enable_ct(3), SSL_CTX_enable_ct(3), SSL_disable_ct(3), SSL_CTX_disable_ct(3), SSL_set_ct_validation_callback(3), SSL_CTX_set_ct_validation_callback(3), SSL_ct_is_enabled(3), SSL_CTX_ct_is_enabled(3)
control Certificate Transparency policy
"glTexGend(3), glTexGenf(3), glTexGeni(3), glTexGendv(3), glTexGenfv(3), glTexGeniv(3)
control the generation of texture coordinates
BIO_ctrl(3), BIO_callback_ctrl(3), BIO_ptr_ctrl(3), BIO_int_ctrl(3), BIO_reset(3), BIO_seek(3), BIO_tell(3), BIO_flush(3), BIO_eof(3), BIO_set_close(3), BIO_get_close(3), BIO_pending(3), BIO_wpending(3), BIO_ctrl_pending(3), BIO_ctrl_wpending(3), BIO_get_info_callback(3), BIO_set_info_callback(3), BIO_info_cb(3), BIO_get_ktls_send(3), BIO_get_ktls_recv(3)
BIO control operations
BIO_ctrl(3ossl), BIO_callback_ctrl(3ossl), BIO_ptr_ctrl(3ossl), BIO_int_ctrl(3ossl), BIO_reset(3ossl), BIO_seek(3ossl), BIO_tell(3ossl), BIO_flush(3ossl), BIO_eof(3ossl), BIO_set_close(3ossl), BIO_get_close(3ossl), BIO_pending(3ossl), BIO_wpending(3ossl), BIO_ctrl_pending(3ossl), BIO_ctrl_wpending(3ossl), BIO_get_info_callback(3ossl), BIO_set_info_callback(3ossl), BIO_info_cb(3ossl), BIO_get_ktls_send(3ossl), BIO_get_ktls_recv(3ossl)
BIO control operations
CURLOPT_ALTSVC_CTRL(3)
control alt-svc behavior
CURLOPT_HSTS_CTRL(3)
control HSTS behavior
ControlPanel-17(1), ControlPanel(1)
Configure desktop settings for FOX Toolkit applications
DS2770(3)
Battery Monitor and Charge Controller
DTLS_timer_cb(3), DTLS_set_timer_cb(3)
Set callback for controlling DTLS timer duration
DTLS_timer_cb(3ossl), DTLS_set_timer_cb(3ossl)
Set callback for controlling DTLS timer duration
Dpkg::Control(3perl)
parse and manipulate official control-like information
Dpkg::Control::Changelog(3perl)
represent info fields output by dpkg-parsechangelog
Dpkg::Control::Fields(3perl)
manage (list of official) control fields
Dpkg::Control::FieldsCore(3perl)
manage (list of official) control fields
Dpkg::Control::Hash(3perl)
parse and manipulate a block of RFC822-like fields
Dpkg::Control::HashCore(3perl)
parse and manipulate a block of RFC822-like fields
Dpkg::Control::Info(3perl)
parse files like debian/control
Dpkg::Control::Tests(3perl)
parse files like debian/tests/control
Dpkg::Control::Tests::Entry(3perl)
represents a test suite entry
Dpkg::Control::Types(3perl)
export CTRL_* constants
Dpkg::Index(3perl)
generic index of control information
EVP_PKEY_CTX_ctrl(3), EVP_PKEY_CTX_ctrl_str(3), EVP_PKEY_CTX_ctrl_uint64(3), EVP_PKEY_CTX_md(3), EVP_PKEY_CTX_set_signature_md(3), EVP_PKEY_CTX_get_signature_md(3), EVP_PKEY_CTX_set_mac_key(3), EVP_PKEY_CTX_set_rsa_padding(3), EVP_PKEY_CTX_get_rsa_padding(3), EVP_PKEY_CTX_set_rsa_pss_saltlen(3), EVP_PKEY_CTX_get_rsa_pss_saltlen(3), EVP_PKEY_CTX_set_rsa_keygen_bits(3), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3), EVP_PKEY_CTX_set_rsa_keygen_primes(3), EVP_PKEY_CTX_set_rsa_mgf1_md(3), EVP_PKEY_CTX_get_rsa_mgf1_md(3), EVP_PKEY_CTX_set_rsa_oaep_md(3), EVP_PKEY_CTX_get_rsa_oaep_md(3), EVP_PKEY_CTX_set0_rsa_oaep_label(3), EVP_PKEY_CTX_get0_rsa_oaep_label(3), EVP_PKEY_CTX_set_dsa_paramgen_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_q_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_md(3), EVP_PKEY_CTX_set_dh_paramgen_prime_len(3), EVP_PKEY_CTX_set_dh_paramgen_subprime_len(3), EVP_PKEY_CTX_set_dh_paramgen_generator(3), EVP_PKEY_CTX_set_dh_paramgen_type(3), EVP_PKEY_CTX_set_dh_rfc5114(3), EVP_PKEY_CTX_set_dhx_rfc5114(3), EVP_PKEY_CTX_set_dh_pad(3), EVP_PKEY_CTX_set_dh_nid(3), EVP_PKEY_CTX_set_dh_kdf_type(3), EVP_PKEY_CTX_get_dh_kdf_type(3), EVP_PKEY_CTX_set0_dh_kdf_oid(3), EVP_PKEY_CTX_get0_dh_kdf_oid(3), EVP_PKEY_CTX_set_dh_kdf_md(3), EVP_PKEY_CTX_get_dh_kdf_md(3), EVP_PKEY_CTX_set_dh_kdf_outlen(3), EVP_PKEY_CTX_get_dh_kdf_outlen(3), EVP_PKEY_CTX_set0_dh_kdf_ukm(3), EVP_PKEY_CTX_get0_dh_kdf_ukm(3), EVP_PKEY_CTX_set_ec_paramgen_curve_nid(3), EVP_PKEY_CTX_set_ec_param_enc(3), EVP_PKEY_CTX_set_ecdh_cofactor_mode(3), EVP_PKEY_CTX_get_ecdh_cofactor_mode(3), EVP_PKEY_CTX_set_ecdh_kdf_type(3), EVP_PKEY_CTX_get_ecdh_kdf_type(3), EVP_PKEY_CTX_set_ecdh_kdf_md(3), EVP_PKEY_CTX_get_ecdh_kdf_md(3), EVP_PKEY_CTX_set_ecdh_kdf_outlen(3), EVP_PKEY_CTX_get_ecdh_kdf_outlen(3), EVP_PKEY_CTX_set0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_get0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_set1_id(3), EVP_PKEY_CTX_get1_id(3), EVP_PKEY_CTX_get1_id_len(3)
algorithm specific control operations
EVP_PKEY_CTX_ctrl(3ossl), EVP_PKEY_CTX_ctrl_str(3ossl), EVP_PKEY_CTX_ctrl_uint64(3ossl), EVP_PKEY_CTX_md(3ossl), EVP_PKEY_CTX_set_signature_md(3ossl), EVP_PKEY_CTX_get_signature_md(3ossl), EVP_PKEY_CTX_set_mac_key(3ossl), EVP_PKEY_CTX_set_group_name(3ossl), EVP_PKEY_CTX_get_group_name(3ossl), EVP_PKEY_CTX_set_rsa_padding(3ossl), EVP_PKEY_CTX_get_rsa_padding(3ossl), EVP_PKEY_CTX_set_rsa_pss_saltlen(3ossl), EVP_PKEY_CTX_get_rsa_pss_saltlen(3ossl), EVP_PKEY_CTX_set_rsa_keygen_bits(3ossl), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3ossl), EVP_PKEY_CTX_set1_rsa_keygen_pubexp(3ossl), EVP_PKEY_CTX_set_rsa_keygen_primes(3ossl), EVP_PKEY_CTX_set_rsa_mgf1_md_name(3ossl), EVP_PKEY_CTX_set_rsa_mgf1_md(3ossl), EVP_PKEY_CTX_get_rsa_mgf1_md(3ossl), EVP_PKEY_CTX_get_rsa_mgf1_md_name(3ossl), EVP_PKEY_CTX_set_rsa_oaep_md_name(3ossl), EVP_PKEY_CTX_set_rsa_oaep_md(3ossl), EVP_PKEY_CTX_get_rsa_oaep_md(3ossl), EVP_PKEY_CTX_get_rsa_oaep_md_name(3ossl), EVP_PKEY_CTX_set0_rsa_oaep_label(3ossl), EVP_PKEY_CTX_get0_rsa_oaep_label(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_bits(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_q_bits(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_md(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_md_props(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_gindex(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_type(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_seed(3ossl), EVP_PKEY_CTX_set_dh_paramgen_prime_len(3ossl), EVP_PKEY_CTX_set_dh_paramgen_subprime_len(3ossl), EVP_PKEY_CTX_set_dh_paramgen_generator(3ossl), EVP_PKEY_CTX_set_dh_paramgen_type(3ossl), EVP_PKEY_CTX_set_dh_paramgen_gindex(3ossl), EVP_PKEY_CTX_set_dh_paramgen_seed(3ossl), EVP_PKEY_CTX_set_dh_rfc5114(3ossl), EVP_PKEY_CTX_set_dhx_rfc5114(3ossl), EVP_PKEY_CTX_set_dh_pad(3ossl), EVP_PKEY_CTX_set_dh_nid(3ossl), EVP_PKEY_CTX_set_dh_kdf_type(3ossl), EVP_PKEY_CTX_get_dh_kdf_type(3ossl), EVP_PKEY_CTX_set0_dh_kdf_oid(3ossl), EVP_PKEY_CTX_get0_dh_kdf_oid(3ossl), EVP_PKEY_CTX_set_dh_kdf_md(3ossl), EVP_PKEY_CTX_get_dh_kdf_md(3ossl), EVP_PKEY_CTX_set_dh_kdf_outlen(3ossl), EVP_PKEY_CTX_get_dh_kdf_outlen(3ossl), EVP_PKEY_CTX_set0_dh_kdf_ukm(3ossl), EVP_PKEY_CTX_get0_dh_kdf_ukm(3ossl), EVP_PKEY_CTX_set_ec_paramgen_curve_nid(3ossl), EVP_PKEY_CTX_set_ec_param_enc(3ossl), EVP_PKEY_CTX_set_ecdh_cofactor_mode(3ossl), EVP_PKEY_CTX_get_ecdh_cofactor_mode(3ossl), EVP_PKEY_CTX_set_ecdh_kdf_type(3ossl), EVP_PKEY_CTX_get_ecdh_kdf_type(3ossl), EVP_PKEY_CTX_set_ecdh_kdf_md(3ossl), EVP_PKEY_CTX_get_ecdh_kdf_md(3ossl), EVP_PKEY_CTX_set_ecdh_kdf_outlen(3ossl), EVP_PKEY_CTX_get_ecdh_kdf_outlen(3ossl), EVP_PKEY_CTX_set0_ecdh_kdf_ukm(3ossl), EVP_PKEY_CTX_get0_ecdh_kdf_ukm(3ossl), EVP_PKEY_CTX_set1_id(3ossl), EVP_PKEY_CTX_get1_id(3ossl), EVP_PKEY_CTX_get1_id_len(3ossl), EVP_PKEY_CTX_set_kem_op(3ossl)
algorithm specific control operations
Gc(3o)
Memory management control and statistics; finalised values
InfernoEmbedded(3), InfernoEmbedded Softdevices(3)
RGBW Controllers - Switch Masters - Firmware Updater
LCD(3)
LCD controller
MPI_Pcontrol(3)
Controls profiling
MPI_T_category_get_cvars(3)
Get control variables in a category
MPI_T_cvar_get_index(3)
Get the index of a control variable
MPI_T_cvar_get_info(3)
Get the information about a control variable
MPI_T_cvar_get_num(3)
Get the number of control variables
MPI_T_cvar_handle_alloc(3)
Allocate a handle for a control variable
MPI_T_cvar_handle_free(3)
Free an existing handle for a control variable
MPI_T_cvar_read(3)
Read the value of a control variable
MPI_T_cvar_write(3)
Write a control variable
OSSL_CMP_SRV_process_request(3ossl), OSSL_CMP_CTX_server_perform(3ossl), OSSL_CMP_SRV_CTX_new(3ossl), OSSL_CMP_SRV_CTX_free(3ossl), OSSL_CMP_SRV_cert_request_cb_t(3ossl), OSSL_CMP_SRV_rr_cb_t(3ossl), OSSL_CMP_SRV_certConf_cb_t(3ossl), OSSL_CMP_SRV_genm_cb_t(3ossl), OSSL_CMP_SRV_error_cb_t(3ossl), OSSL_CMP_SRV_pollReq_cb_t(3ossl), OSSL_CMP_SRV_CTX_init(3ossl), OSSL_CMP_SRV_CTX_get0_cmp_ctx(3ossl), OSSL_CMP_SRV_CTX_get0_custom_ctx(3ossl), OSSL_CMP_SRV_CTX_set_send_unprotected_errors(3ossl), OSSL_CMP_SRV_CTX_set_accept_unprotected(3ossl), OSSL_CMP_SRV_CTX_set_accept_raverified(3ossl), OSSL_CMP_SRV_CTX_set_grant_implicit_confirm(3ossl)
generic functions to set up and control a CMP server
OSSL_CRMF_MSG_set1_regCtrl_regToken(3ossl), OSSL_CRMF_MSG_set1_regCtrl_authenticator(3ossl), OSSL_CRMF_MSG_PKIPublicationInfo_push0_SinglePubInfo(3ossl), OSSL_CRMF_MSG_set0_SinglePubInfo(3ossl), OSSL_CRMF_MSG_set_PKIPublicationInfo_action(3ossl), OSSL_CRMF_MSG_set1_regCtrl_pkiPublicationInfo(3ossl), OSSL_CRMF_MSG_set1_regCtrl_protocolEncrKey(3ossl), OSSL_CRMF_MSG_set1_regCtrl_oldCertID(3ossl), OSSL_CRMF_CERTID_gen(3ossl)
functions setting CRMF Registration Controls
RSA_pkey_ctx_ctrl(3), EVP_PKEY_CTX_set_rsa_padding(3), EVP_PKEY_CTX_get_rsa_padding(3), EVP_PKEY_CTX_set_rsa_keygen_bits(3), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3), EVP_PKEY_CTX_set_rsa_mgf1_md(3), EVP_PKEY_CTX_get_rsa_mgf1_md(3), EVP_PKEY_CTX_set_rsa_oaep_md(3), EVP_PKEY_CTX_get_rsa_oaep_md(3), EVP_PKEY_CTX_set0_rsa_oaep_label(3), EVP_PKEY_CTX_get0_rsa_oaep_label(3), EVP_PKEY_CTX_set_rsa_pss_saltlen(3), EVP_PKEY_CTX_get_rsa_pss_saltlen(3), EVP_PKEY_CTX_set_rsa_pss_keygen_md(3), EVP_PKEY_CTX_set_rsa_pss_keygen_mgf1_md(3), EVP_PKEY_CTX_set_rsa_pss_keygen_saltlen(3)
RSA private key control operations
SSL_CTX_set_max_send_fragment(3), SSL_set_max_send_fragment(3), SSL_CTX_set_split_send_fragment(3), SSL_set_split_send_fragment(3), SSL_CTX_set_max_pipelines(3), SSL_set_max_pipelines(3), SSL_CTX_set_default_read_buffer_len(3), SSL_set_default_read_buffer_len(3), SSL_CTX_set_tlsext_max_fragment_length(3), SSL_set_tlsext_max_fragment_length(3), SSL_SESSION_get_max_fragment_length(3)
Control fragment size settings and pipelining operations
SSL_CTX_set_max_send_fragment(3ossl), SSL_set_max_send_fragment(3ossl), SSL_CTX_set_split_send_fragment(3ossl), SSL_set_split_send_fragment(3ossl), SSL_CTX_set_max_pipelines(3ossl), SSL_set_max_pipelines(3ossl), SSL_CTX_set_default_read_buffer_len(3ossl), SSL_set_default_read_buffer_len(3ossl), SSL_CTX_set_tlsext_max_fragment_length(3ossl), SSL_set_tlsext_max_fragment_length(3ossl), SSL_SESSION_get_max_fragment_length(3ossl)
Control fragment size settings and pipelining operations
SSL_CTX_set_srp_username(3ossl), SSL_CTX_set_srp_password(3ossl), SSL_CTX_set_srp_strength(3ossl), SSL_CTX_set_srp_cb_arg(3ossl), SSL_CTX_set_srp_username_callback(3ossl), SSL_CTX_set_srp_client_pwd_callback(3ossl), SSL_CTX_set_srp_verify_param_callback(3ossl), SSL_set_srp_server_param(3ossl), SSL_set_srp_server_param_pw(3ossl), SSL_get_srp_g(3ossl), SSL_get_srp_N(3ossl), SSL_get_srp_username(3ossl), SSL_get_srp_userinfo(3ossl)
SRP control operations
SSL_set_num_tickets(3), SSL_get_num_tickets(3), SSL_CTX_set_num_tickets(3), SSL_CTX_get_num_tickets(3)
control the number of TLSv1.3 session tickets that are issued
SSL_set_num_tickets(3ossl), SSL_get_num_tickets(3ossl), SSL_CTX_set_num_tickets(3ossl), SSL_CTX_get_num_tickets(3ossl), SSL_new_session_ticket(3ossl)
control the number of TLSv1.3 session tickets that are issued
TIFFReadBufferSetup(3tiff), TIFFWriteBufferSetup(3tiff)
I/O buffering control routines
Tcl_PkgPresent.tcl85(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3)
package version control
Tcl_PkgPresent.tcl86(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3)
package version control
Tcl_PkgPresent.tcl87(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3)
package version control
Tcl_UniCharIsAlnum.tcl85(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsWordChar(3)
routines for classification of Tcl_UniChar characters
Tcl_UniCharIsAlnum.tcl86(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsWordChar(3)
routines for classification of Tcl_UniChar characters
Tcl_UniCharIsAlnum.tcl87(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsUnicode(3), Tcl_UniCharIsWordChar(3)
routines for classification of Tcl_UniChar characters
Tk_SetGrid.tk85(3), Tk_SetGrid(3), Tk_UnsetGrid(3)
control the grid for interactive resizing
Tk_SetGrid.tk86(3), Tk_SetGrid(3), Tk_UnsetGrid(3)
control the grid for interactive resizing
XAddHost(3), XAddHosts(3), XListHosts(3), XRemoveHost(3), XRemoveHosts(3), XSetAccessControl(3), XEnableAccessControl(3), XDisableAccessControl(3), XHostAddress(3), XServerInterpretedAddress(3)
control host access and host control structure
XChangeKeyboardControl(3), XGetKeyboardControl(3), XAutoRepeatOn(3), XAutoRepeatOff(3), XBell(3), XQueryKeymap(3), XKeyboardControl(3)
manipulate keyboard settings and keyboard control structure
XChangePointerControl(3), XGetPointerControl(3)
control pointer
XGetDeviceControl(3), XChangeDeviceControl(3)
query and change input device controls
XGetFeedbackControl(3), XChangeFeedbackControl(3)
query and change input device feedbacks
XInstallColormap(3), XUninstallColormap(3), XListInstalledColormaps(3)
control colormaps
XKanjiControl(3), UILib(3)
intro User interface library intro
XSetCloseDownMode(3), XKillClient(3)
control clients
XSetDeviceFocus(3), XGetDeviceFocus(3)
control extension input device focus
XSetInputFocus(3), XGetInputFocus(3)
control input focus
XTestQueryExtension(3), XTestCompareCursorWithWindow(3), XTestCompareCurrentCursorWithWindow(3), XTestFakeKeyEvent(3), XTestFakeButtonEvent(3), XTestFakeMotionEvent(3), XTestFakeRelativeMotionEvent(3), XTestGrabControl(3), XTestSetGContextOfGC(3), XTestSetVisualIDOfVisual(3), XTestDiscard(3)
XTest extension functions
XkbAllocControls(3)
Allocates an XkbControlsRec structure in the XkbDescRec
XkbChangeControls(3)
Provides a flexible method for updating the controls in a server to match those in the changed keyboard description
XkbChangeEnabledControls(3)
Manipulates the EnabledControls control
XkbFreeControls(3)
Frees memory used by the ctrls member of an XkbDescRec structure
XkbGetAutoRepeatRate(3)
Gets the current attributes of the RepeatKeys control for a keyboard device
XkbGetAutoResetControls(3)
Gets the current values of the auto-reset controls
XkbGetControls(3)
Finds the current state of Xkb server controls
XkbGetControlsChanges(3)
Updates a local copy of a keyboard description with the changes previously noted by one or more calls to XkbNoteControlsChanges
XkbGetXlibControls(3)
Determines the current state of the Library Controls
XkbNoteControlsChanges(3)
Notes the changes in a changes structure when a client receives an XkbControlsNotify event
XkbSetAutoRepeatRate(3)
Sets the attributes of the RepeatKeys control for a keyboard device
XkbSetAutoResetControls(3)
Changes the current values of the AutoReset control attributes
XkbSetControls(3)
Copies changes to the X server based on a modified ctrls structure in a local copy of the keyboard description
XkbSetDebuggingFlags(3)
Change the values of any of the debug controls
XkbSetXlibControls(3)
Changes the state of the Library Controls
XmGetTearOffControl(3)
A RowColumn function that obtains the widget ID for the tear-off control in a menu "XmGetTearOffControl" "RowColumn functions" "XmGetTearOffControl"
XmScaleSetTicks(3)
A Scale function that controls tick marks "XmScaleSetTicks" "Scale functions" "XmScaleSetTicks"
Xsecurity(7)
X display access control
acerhdf(4)
Acer Aspire One fan control
alsactl(1)
advanced controls for ALSA soundcard driver
amadmin(8)
administrative interface to control Amanda backups
amtape(8)
Control Amanda changers
amttool(1)
remotely control Intel AMT managed machines
amulecmd(1)
Console-based program to control aMule
amulegui(1)
aMule control program with GUI
anvil(8)
Postfix session count and request rate control
anyremote(1)
control PC with Bluetooth/Wi-Fi cell phone
apachectl(8)
Apache HTTP Server Control Interface
apccontrol(8)
apcupsd(8) event handler script
apcctrl(8)
a daemon for controlling most APC UPSes
apcpwr(8)
control power on/off/reboot via an APC MasterSwitch
apcupsd(8)
a daemon for controlling most APC UPSes
archive_entry_acl(3), archive_entry_acl_add_entry(3), archive_entry_acl_add_entry_w(3), archive_entry_acl_clear(3), archive_entry_acl_count(3), archive_entry_acl_from_text(3), archive_entry_acl_from_text_w(3), archive_entry_acl_next(3), archive_entry_acl_reset(3), archive_entry_acl_to_text(3), archive_entry_acl_to_text_w(3), archive_entry_acl_types(3)
functions for manipulating Access Control Lists in archive entry descriptions
archive_read_set_filter_option(3), archive_read_set_format_option(3), archive_read_set_option(3), archive_read_set_options(3)
functions controlling options for reading archives
archive_write_set_filter_option(3), archive_write_set_format_option(3), archive_write_set_option(3), archive_write_set_options(3)
functions controlling options for writing archives
arv-tool-0.6(1)
Small utility for basic control of a Genicam device
asl(1)
cross assembler for microprocessors and -controllers
asmctl(1)
controlling keyboard backlight and LCD backlight
asmix(1)
the AfterStep volume control knob
atc(6)
air traffic controller game
attr_get(3x), wattr_get(3x), attr_set(3x), wattr_set(3x), attr_off(3x), wattr_off(3x), attr_on(3x), wattr_on(3x), attroff(3x), wattroff(3x), attron(3x), wattron(3x), attrset(3x), wattrset(3x), chgat(3x), wchgat(3x), mvchgat(3x), mvwchgat(3x), color_set(3x), wcolor_set(3x), standend(3x), wstandend(3x), standout(3x), wstandout(3x)
curses character and window attribute control routines
au_control(3), setac(3), endac(3), getacdir(3), getacmin(3), getacexpire(3), getacfilesz(3), getacflg(3), getacna(3), getacpol(3), au_poltostr(3), au_strtopol(3)
look up information from the audit_control database
auctl(1)
control various audio server parameters
audit_control(5)
audit system parameters
audtool(1)
a small tool to control Audacious from the command line
autocd(8)
compact disc control daemon
bgpctl(8)
control the Border Gateway Protocol daemon
bmc-watchdog(8)
BMC watchdog timer daemon and control utility
brz(1)
Breezy next-generation distributed version control
bwping(8)
and bwping6 are tools to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism
callgrind_control(1)
observe and control programs being run by Callgrind
cciss_vol_status(8)
show status of logical drives attached to HP Smartarray controllers
cdctl(1), eject(1), pause(1)
specify commands for autocd daemon control utility
cec-ctl(1)
An application to control cec devices
chilli(8)
A Software Access Controller for Captive Portal and WPA
cmus-remote(1)
control cmus
collectdctl(1)
Control interface for collectd
concordance(1)
for programming your Logitech Harmony remote control
console.tk85(n), console(n)
Control the console on systems without a real console
console.tk86(n), console(n)
Control the console on systems without a real console
control.ctl(5)
Specify handling of Usenet control messages
control_rancid(1)
run rancid for devices of a group
controlchan(8)
Channel-fed control message handler
controller_leds(3), controller_leds (3)
Query or rescan for LED controllers
controlperm(5)
responses to news control messages
cpclean(1)
Remove wrong control points by statistical methods
ctl(5)
Control Temporal Logic file format. man1/alc_origin.1
ctlinnd(8)
Control the main InterNetNews daemon
ctluser(8)
control lusers
cvswrap(1)
wrapper over cvs to enable fine grained access control to repositories
d_slider_proc(3)
Dialog procedure implementing a slider control object. Allegro game programming library
dae(1)
List and control system daemons
deb-control(5)
Debian binary packages' master control file format
deb-src-control(5)
Debian source packages' master control file format
deb822(5)
Debian RFC822 control data format
desktopctl(1)
Control interface for the desktop manager
dfu-programmer(1)
USB firmware upgrading for Atmel microcontrollers
dhcp6ctl(8)
DHCPv6 client and server control utility
diablo-files(5)
Synopsis of configuration and control files for Diablo
dm-tool(1)
a tool to control the display manager
doveadm-acl(1)
Manage Access Control List (ACL)
dpkg-gencontrol(1)
generate Debian control files
dsc(5)
Debian source packages' control file format
dunecontrol(1)
Control program for the Dune build system
dunstctl(1)
Command line control utility for dunst, a customizable and lightweight notification-daemon
eiskaltdcpp-daemon(1)
simple daemon controllable via XMLRPC or JSONRPC
entangle(1)
tethered camera control & capture
explain_flock_or_die(3)
control advisory lock on open file and report errors require_index { "apply or remove an advisory lock on an open file and report errors" }
explain_ioctl_or_die(3)
control device and report errors require_index { "control device and report errors" }
explain_shmctl_or_die(3)
shared memory control and report errors require_index { "shared memory control and report errors" }
explain_tcflow_or_die(3)
terminal flow control and report errors require_index { "terminal flow control and report errors" }
exswitch(3)
Controlling the console switch mode for background running. Allegro game programming library
fail2ban-client(1)
configure and control the server
faxqueue(5)
sendfax fax spool queue control files
faxstate(8c)
control ``modem state'' of a device used by
fcitx-remote(1)
Tool for control fcitx state via console
fi_control(3)
Perform an operation on a fabric resource
fi_cq(3)
Completion queue operations fi_cq_open / fi_close Open/close a completion queue fi_control Control CQ operation or attributes. fi_cq_read / fi_cq_readfrom / fi_cq_readerr Read a completion from a completion queue fi_cq_sread / fi_cq_sreadfrom A synchronous (blocking) read that waits until a specified condition has been met before reading a completion from a completion queue. fi_cq_signal Unblock any thread waiting in fi_cq_sread or fi_cq_sreadfrom. fi_cq_strerror Converts provider specific error information into a printable string
fi_endpoint(3)
Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
fi_eq(3)
Event queue operations fi_eq_open / fi_close Open/close an event queue fi_control Control operation of EQ fi_eq_read / fi_eq_readerr Read an event from an event queue fi_eq_write Writes an event to an event queue fi_eq_sread A synchronous (blocking) read of an event queue fi_eq_strerror Converts provider specific error information into a printable string
fi_poll(3)
Polling and wait set operations fi_poll_open / fi_close Open/close a polling set fi_poll_add / fi_poll_del Add/remove a completion queue or counter to/from a poll set. fi_poll Poll for progress and events across multiple completion queues and counters. fi_wait_open / fi_close Open/close a wait set fi_wait Waits for one or more wait objects in a set to be signaled. fi_trywait Indicate when it is safe to block on wait objects using native OS calls. fi_control Control wait set operation or attributes
figlist(6)
lists figlet fonts and control files
fontchooser.tk86(n), fontchooser(n)
control font selection dialog
foot-ctlseqs(7)
terminal control sequences supported by foot
force_image_blend(3), force_image_blend (3)
Control image blend behaviour
form_field_attributes(3x)
color and attribute control for form fields
form_field_buffer(3x)
field buffer control
fossil(1)
Distributed Version Control System
ftpdctl(8)
ProFTPD control program
ftpusers(5), ftpchroot(5)
tnftpd(8) access control file
gdnsdctl(8)
Control socket client for gdnsd
gen-ctl-io(1)
generate C interface code for libctl control files
geocpset(1)
adds control points based on geometric position
git-lock(1)
Lock a file excluded from version control
git-sed(1)
replace patterns in git-controlled files
git-unlock(1)
Unlock a file excluded from version control
glFeedbackBuffer(3), "glFeedbackBuffer(3)
controls feedback mode
glIndexMask(3), "glIndexMask(3)
control the writing of individual bits in the color index buffers
glStencilMask(3), "glStencilMask(3)
control the writing of individual bits in the stencil planes
gmpc-remote(1)
a remote control for GMPC
gmpc-remote-stream(1)
a remote control for GMPC
gource(1), Gource(1)
a software version control visualization
gpsctl(1)
control the modes of a GPS
gpsdctl(8)
tool for sending commands to gpsd over its control socket
gpsmon(1)
real-time GPS packet monitor and control utility
grig(1)
graphical user interface for the Ham Radio Control Libraries (hamlib)
gsmartcontrol(1), GSmartControl(1)
Hard disk drive and SSD health inspection tool
hamlib(7)
radio and rotator control library
hamlib-primer(7)
compiling and using the radio and rotator control library
hamlib-utilities(7), hamlib-utilties(7)
radio and rotator control utilities of Hamlib
hastmonctl(8)
hastmon control utility
hcdplay(1)
Control autonomous CDDA playback using Linux CDROM ioctls
honeydctl(1)
Honey Control
hosts.hfaxd(5f)
client access control list
hylafax-shutdown(5f), etc/shutdown(5f)
server shutdown control file
icesh(1), icesh(1)
control window properties and the IceWM window manager
iconvctl(3)
control iconv behavior
icpfind(1)
Use heuristic control-point detection strategies
ikectl(8)
control the IKEv2 daemon
ikiwiki-makerepo(1)
check an ikiwiki srcdir into revision control
image_clip_on(3), image_clip_on (3)
Control clipping for a video object
immortalctl(8)
control services started by immortal(8)
innwatch.ctl(5)
control Usenet supervision by innwatch
intel_backlight(1)
control backlight on various modern Intel GPUs
ipactl(8)
-- control utility for ipa(8)
ipmipower(8)
IPMI power control utility
ipmitool(1)
utility for controlling IPMI-enabled devices
ir-keytable(1)
a swiss-knife tool to handle Remote Controllers
ivtscd(8)
driver for the IVT Solar Controller Device
jack_freewheel(1)
JACK toolkit client to control freewheeling mode
jack_transport(1)
JACK toolkit client for transport control
jcontrol(1)
a sample module client written in C
jobcontrol(8c), jobcontrols(8c)
per-job controls for servers
kamctl(8)
Kamailio control tool
kamdbctl(8)
Kamailio database control tool
kcemu-remote(1)
A remote controller for the KC 85/4 Emulator
kea-ctrl-agent(8)
Control Agent process in Kea rst2man-indent-level 0 1 rstReportMargin \$1
kea-shell(8)
Text client for Control Agent process rst2man-indent-level 0 1 rstReportMargin \$1
knotc(8)
Knot DNS control utility rst2man-indent-level 0 1 rstReportMargin \$1
larsremote(1)
Command line control for larswm
latcp(8)
LAT Control Program
ldap_control_create(3), ldap_control_find(3), ldap_control_dup(3), ldap_controls_dup(3), ldap_control_free(3), ldap_controls_free(3)
LDAP control manipulation routines
ldap_parse_reference(3)
Extract referrals and controls from a reference message
ldap_parse_sort_control(3)
Decode the information returned from a search operation that used a server-side sort control
ldap_parse_vlv_control(3)
Decode the information returned from a search operation that used a VLV (virtual list view) control
ldirectord(8)
Linux Director Daemon Daemon to monitor remote services and control Linux Virtual Server
libmpatrol(3)
dynamic memory allocation and tracing library
lightning-cli(1)
Control lightning daemon
lldpcli(8), lldpctl(8)
control LLDP daemon
lmmon(8)
display motherboard power management controller information
lpc(8)
line printer control program (deprecated)
lpd.perms(5)
permissions control file for the LPRng line printer spooler system
lscp(1)
the LinuxSampler Control Protocol (LSCP) shell
luser(8)
process to control the clueless induhviduals who (mis)use computer systems, peripheral devices and system administrators. Word play on "loser" and "user"
lxi(1)
a tool for controlling LXI compatible instruments
lxpanelctl(1)
controller for lxpanel
lynxone(7)
OSS driver for LynxONE professional audio controller
m17nFace(3m17n), Face(3m17n)
A face is an object to control appearance of M-text
maildiracl(1)
manage access control lists
mailestctl(1)
control the mailest
makoctl(1)
controls the mako(1) daemon
mate-about-me(1)
is a control center applet
mate-appearance-properties(1)
is a control center applet
mate-control-center(1)
Configure MATE settings
mate-default-applications-properties(1)
is a control center applet
mate-power-backlight-helper(1)
helper application for MATE's power management backlight control
mate-screensaver-command(1)
controls MATE screensaver
mate-system-monitor(1)
view and control processes
mate-volume-control(1)
The MATE Volume Control application
mate-volume-control-applet(1)
The MATE Volume Control Applet
mc-tool(1)
manipulate Mission Control accounts from the command line
md-mx-ctrl(8)
Control mimedefang-multiplexor
mdraw_text_with_control(3m17n)
Draw an M-text on a window with fine control
memory.tcl85(n), memory(n)
Control Tcl memory debugging capabilities
memory.tcl86(n), memory(n)
Control Tcl memory debugging capabilities
memory.tcl87(n), memory(n)
Control Tcl memory debugging capabilities
menu_back(3x), menu_fore(3x), menu_grey(3x), menu_pad(3x), set_menu_back(3x), set_menu_fore(3x), set_menu_grey(3x), set_menu_pad(3x)
color and attribute control for menus
mfsexports.cfg(5)
MooseFS access control for mfsmounts
mimedefang-multiplexor(8)
Process pool controller for mail filters
mission-control-5(8)
Telepathy account manager/chanel dispatcher
mleak(1)
locates memory leaks in an mpatrol log file
modbus_report_slave_id(3)
returns a description of the controller
mosquitto_ctrl_dynsec(1)
mosquitto_ctrl module for controlling the Mosquitto Dynamic Security plugin
mpatrol(1)
runs programs using the mpatrol library
mprof(1)
displays profiling information produced by the mpatrol library
mpsym(1)
locates missing symbolic information in an mpatrol log file
mptrace(1)
displays tracing information produced by the mpatrol library
mtn(1), monotone(1)
a distributed version control system
mtx(1)
control SCSI media changer devices
mtxorbd(1)
Control a matrix orbital lcd screen
netatalk(8)
Netatalk AFP server service controller daemon
newsctl(5)
USENET network news control files
nmixer(1)
An interactive text-based sound-mixer control program
nn_cmsg(3)
access control information
nsd-control(8), nsd-control-setup(8)
NSD remote server control utility
ntpctl(8)
control the Network Time Protocol daemon
ntpdc(8)
vendor-specific NTPD control program
occtl(8)
OpenConnect VPN server control tool
ocf_heartbeat_Evmsd(7)
Controls clustered EVMS volume management (deprecated)
ocf_heartbeat_LVM(7)
Controls the availability of an LVM Volume Group
ocf_heartbeat_pgagent(7)
Controls pgagent
ocf_pacemaker_controld(7)
DLM Agent for cluster file systems
ods-control(8)
OpenDNSSEC control utility
oss_midimix(7)
Driver for controlling OSS mixer devices using MIDI messages
oss_via823x(7)
Open Sound System driver for VIA 8233/8235/8237 audio controllers
otter-browser(1)
the web browser controlled by the user, not vice-versa
ovs-testcontroller(8)
simple OpenFlow controller for testing
owhttpd(1)
Tiny webserver for 1-wire control
owserver(1)
Backend server (daemon) for 1-wire control
pacemaker-controld(7)
Pacemaker controller options
package.tcl85(n), package(n)
Facilities for package loading and version control
package.tcl86(n), package(n)
Facilities for package loading and version control
package.tcl87(n), package(n)
Facilities for package loading and version control
pactl(1)
Control a running PulseAudio sound server
pamrubber(1)
a rubber-sheeting utility that stretches an image based on control points synopsis
pcontrol(1)
Send commands to running pproxy or pserv
pdns_control(1)
Control the PowerDNS nameserver rst2man-indent-level 0 1 rstReportMargin \$1
pdnsd-ctl(8)
controls pdnsd
pdnsutil(1)
PowerDNS record and DNSSEC command and control rst2man-indent-level 0 1 rstReportMargin \$1
penctl(1)
control a running pen load balancer
perpctl(8)
runtime control utility for perpd (8) services
perpd(8)
persistent process scanner/supervisor/controller
pg_controldata(1)
display control information of a PostgreSQL database cluster
pg_ctl(1)
initialize, start, stop, or control a PostgreSQL server
pg_recvlogical(1)
control PostgreSQL logical decoding streams
pg_resetwal(1)
reset the write-ahead log and other control information of a PostgreSQL database cluster
pg_resetxlog(1)
reset the write-ahead log and other control information of a PostgreSQL database cluster
pgpverify(1)
Cryptographically verify Usenet control messages
photopc(1)
utility to control digital cameras based on Sierra Imaging firmware
playerctl(1)
control media players via MPRIS
plmpower(8)
control Insteon/X10 devices via SmartLabs PLM 2412S
postfix(1)
Postfix control program
postqueue(1)
Postfix queue control
poundctl(8)
control the pound(8) daemon
powermand(8)
power control and monitoring daemon
pptpctrl(8)
PPTP control connection manager
pslist(1)
control processes and their descendants
pvm_advise(3), pvm_advise()(3)
Controls use of direct task-to-task routing. [In Version 3.2: Replaced by pvm_setopt]
pwcview(1)
view video, create jpeg snapshots and alter settings of a webcam controlled by the pwc(4) driver
qconfirm-control(1)
change qconfirm configuration through email
qctl(8)
control tool for qico ftn mailer
qjackctl(1)
User interface for controlling JACK (Jack Audio Connection Kit)
qmidictl(1)
A MIDI Remote Controller via UDP/IP Multicast
quat_slerp(3)
Version of quat_interpolate() allowing control over the rotation. Allegro game programming library
queue-pr(8)
incoming mail control for GNATS
racoonctl(8)
racoon administrative control tool
radctl(8)
Radius daemon control interface
rapolicy(1)
compare a argus(8) data file/stream against a Cisco Access Control List
rc_keymap(5)
toml file describing remote control keymap
readers.conf(5)
Access control and configuration for nnrpd
rec_control(1)
Command line tool to control a running Recursor
relayctl(8)
control the relay daemon
rhythmbox-client(1)
controls a running instance of rhythmbox
rigctl(1)
control radio transceivers and receivers
rigctld(1)
TCP radio control daemon
rndc(8)
name server control utility rst2man-indent-level 0 1 rstReportMargin \$1
rnews(8cn), cunbatch(8cn)
accept and spool news input newsspool, newsrun - news input spooler and processing newsrunning - control news-processing daemon
rotctl(1)
control antenna rotators
rotctld(1)
TCP rotator control daemon
rovclock(8)
utility to control frequency rates of your Radeon card
sayonara-ctl(1)
control sayonara via dbus
sc_ThreadGrp(3), sc::ThreadGrp(3)
The ThreadGrp abstract class provides a means to manage separate threads of control
sc_remoted(1)
interact with a collection of remotely controlled scamper instances
scale.tk86(n), scale(n)
Create and manipulate 'scale' value-controlled slider widgets
scancel(1)
Used to signal jobs or job steps that are under the control of Slurm
scene_gap(3)
Number controlling the scene z-sorting algorithm behaviour. Allegro game programming library
scontrol(1)
view or modify Slurm configuration and state
scrcpy(1)
Display and control your Android device
scriptingcontrol(1)
Scripting Control script for the Scripting Service
scrollbar.tk86(n), scrollbar(n)
Create and manipulate 'scrollbar' scrolling control and indicator widgets
scsieject(1)
control SCSI tape devices
scsitape(1)
control SCSI tape devices
sct(1)
screen temperature control
sd-mux-ctrl(1)
control software for sd-mux devices
set_led_rgb(3), set_led_rgb (3)
Set the specific R,G,B values for an individual LED on a specific controller
sg_bg_ctl(8)
send SCSI BACKGROUND CONTROL command
sg_rdac(8)
display or modify SCSI RDAC Redundant Controller mode page
sg_stream_ctl(8)
send SCSI STREAM CONTROL or GET STREAM STATUS command
shtk_process_run(3)
Executes a command in a controlled environment
smartctl(8)
Control and Monitor Utility for SMART Disks
smbcontrol(1)
send messages to smbd, nmbd or winbindd processes
smp_phy_control(8)
invoke PHY CONTROL SMP function
smtpctl(8), mailq(8)
control the Simple Mail Transfer Protocol daemon
snmpvacm(1)
creates and maintains SNMPv3 View-based Access Control entries on a network entity
snobol4ctrl(1)
SNOBOL4 control lines
softflowctl(8)
Remote control program for softflowd
spank(8), SPANK(8)
Slurm Plug-in Architecture for Node and job (K)control
spline(3)
Draws a Bezier spline using four control points. Allegro game programming library
spmdctl(8)
Control spmd
spmfilter(1)
spmfilter control program
ss-manager(1)
ss-server controller for multi-user management and traffic statistics
ssl_ct_validation_cb(3), SSL_enable_ct(3), SSL_CTX_enable_ct(3), SSL_disable_ct(3), SSL_CTX_disable_ct(3), SSL_set_ct_validation_callback(3), SSL_CTX_set_ct_validation_callback(3), SSL_ct_is_enabled(3), SSL_CTX_ct_is_enabled(3)
control Certificate Transparency policy
ssl_ct_validation_cb(3ossl), SSL_enable_ct(3ossl), SSL_CTX_enable_ct(3ossl), SSL_disable_ct(3ossl), SSL_CTX_disable_ct(3ossl), SSL_set_ct_validation_callback(3ossl), SSL_CTX_set_ct_validation_callback(3ossl), SSL_ct_is_enabled(3ossl), SSL_CTX_ct_is_enabled(3ossl)
control Certificate Transparency policy
sssctl(8)
SSSD control and status utility
sssd-simple(5)
the configuration file for SSSDs simple access-control provider
suricatactl(1)
Suricata Control rst2man-indent-level 0 1 rstReportMargin \$1
sv(8)
control and manage services monitored by runsv (8)
svc(8)
controls services monitored by supervise (8)
svmod(8)
helper to control user access to runsv services
swanctl(8)
strongSwan configuration, control and monitoring command line interface
tally.control(8)
Keep track of newsgroup creations and deletions
tarantoolctl(1)
a utility to control Tarantool instances
taskdctl(1)
Taskserver control program
tdadmin(1)
a command line utility to edit devices and controllers for Telldus TellStick
telldusd(1)
background service for Telldus TellStick, must be running to control TellStick
termkey_interpret_string(3)
fetch stored control string
termkey_set_buffer_size(3), termkey_get_buffer_size(3)
control the buffer size
termkey_set_canonflags(3), termkey_get_canonflags(3)
control the canonicalisation flags
termkey_set_flags(3), termkey_get_flags(3)
control the operational flags
termkey_set_waittime(3), termkey_get_waittime(3)
control the wait time for multibyte sequences
teseq(1)
Format text with terminal escapes and control sequences for human consumption
timedc(8)
timed control program
tinc(8)
tinc VPN control
tixControl(n)
Create and manipulate tixControl widgets '" '" '" '"
torrus_acledit(1), acledit(1)
Manage Torrus access control lists (ACLs)
touchwin(3x), touchline(3x), untouchwin(3x), wtouchln(3x), is_linetouched(3x), is_wintouched(3x)
curses refresh control routines
tpm2_clearcontrol(1), tpm2_clearcontrol(1)(1)
Set/ Clear TPMA_PERMANENT.disableClear attribute to effectively block/ unblock lockout authorization handle for issuing TPM clear
tpm2_evictcontrol(1), tpm2_evictcontrol(1)(1)
Make a transient object persistent or evict a persistent object
tpm2_hierarchycontrol(1), tpm2_hierarchycontrol(1)(1)
Enable and disable use of a hierarchy and its associated NV storage
transmission-remote(1)
a remote control utility for transmission-daemon(1) and transmission(1)
ts.conf(5)
Configuration file for tslib, controlling touch screens for embedded devices
tsi(5f)
Transmission Subscriber Identification (c TSIc ) access control list
tsitest(8c)
TSI access control list checking program
ttk::scrollbar.tk85(n), ttk::scrollbar(n)
Control the viewport of a scrollable widget
ttk_scrollbar.tk86(n), ttk::scrollbar(n)
Control the viewport of a scrollable widget
unbound-control(8), unbound-control-setup(8)
Unbound remote server control utility
upsdrvctl(8)
UPS driver controller
upsdrvsvcctl(8)
UPS driver service instance controller
upsmon(8)
UPS monitor and shutdown controller
urxvtc(1)
control the urxvtd daemon
usb_modeswitch(1)
control the mode of 'multi-state' USB devices
uustat(1)
UUCP status inquiry and control
v4l2-ctl(1)
An application to control video4linux drivers
varnishadm(1)
Control a running Varnish instance
vmixctl(8)
Open Sound System utility to control the vmix subsystem
vncconfig(1)
configure and control a VNC server
vpcd(8)
virtual power control daemon
vtep(5)
hardware_vtep database schema This schema specifies relations that a VTEP can use to integrate physical ports into logical switches maintained by a network virtualization controller such as NSX[char46] Glossary: VTEP VXLAN Tunnel End Point, an entity which originates and/or terminates VXLAN tunnels[char46] HSC Hardware Switch Controller[char46] NVC Network Virtualization Controller, e[char46]g[char46] NSX[char46] VRF Virtual Routing and Forwarding instance[char46]
wackatrl(8)
IP-failover high-availability controller
waffle_feature_test_macros(7)
Macros to control definitions exposed by Waffles headers
wlsunset(1), wlsunet(1)
Day/night gamma adjustments for Wayland compositors supporting wlr-gamma-control-unstable-v1
wwwoffle(1)
A program to control the World Wide Web Offline Explorer
xautomation(7)
control X from the command line, and find things on the screen
xawtv-remote(1)
v4lctl -- control video4linux devices
xdaclunix(1)
control access to your UNIX XDiary databases
xdg-screensaver(1)
command line tool for controlling the screensaver
xfce4-screensaver-command(1)
controls Xfce screensaver
xhost(1)
server access control program for X
xine-remote(1)
a small tool to connect xine remote control server
xscreensaver-command(1)
control a running xscreensaver process
xscreensaver-demo(1)
interactively control the background xscreensaver daemon
xtermcontrol(1)
dynamic control of XFree86 xterm properties
xvidcap-dbus-client(1), XVidCap D-BUS Client(1)
Remote Control Utility for XVidCap
xymonwebaccess(5), xymon-webaccess(5)
Web-based access controls in Xymon
yadifa(8), YADIFA(8)
is an utility for controlling YADIFAD
yodlstriproff(1)
strip ASCII control characters
zmq_proxy_steerable(3)
built-in 0MQ proxy with control flow
zoneminder-zmcamtool.pl(8), zmcamtool.pl(8)
ZoneMinder tool to import camera controls and presets
zoneminder-zmcontrol.pl(8), zmcontrol.pl(8)
ZoneMinder control script
zoneminder-zmdc.pl(8), zmdc.pl(8)
ZoneMinder Daemon Control script
zoneminder-zmpkg.pl(8), zmpkg.pl(8)
ZoneMinder Package Control Script
zoneminder-zmx10.pl(8), zmx10.pl(8)
ZoneMinder X10 Control Script
zosc(3)
Class for work with Open Sound Control messages
9p-cmdbuf(3), Cmdbuf(3), parsecmd(3), respondcmderror(3), lookupcmd(3)
control message parsing
Algorithm::FloodControl(3)
Limit event processing to count/time ratio
Apache2::SiteControl(3)
Perl web site authentication/authorization system
Apache2::SiteControl::GrantAllRule(3)
A rule that grants permission to do everything
Apache2::SiteControl::ManagerFactory(3)
An abstract base class to use as a pattern for custom PermissionManager production
Apache2::SiteControl::PermissionManager(3)
Rule-based permission management
Apache2::SiteControl::Radius(3)
Raduis authentication module for SiteControl
Apache2::SiteControl::Rule(3)
Permission manager access rule
Apache2::SiteControl::User(3)
User representations
Apache2::SiteControl::UserFactory(3)
User factory/persistence
App::Control(3)
Perl module for apachectl style control of another script or executable
App::Control::Apache(3)
App::Control subclass for apache
Async::MergePoint(3), "Async::MergePoint"(3)
resynchronise diverged control flow
Audio::Mixer(3)
Perl extension for Sound Mixer control
BigIP::iControl(3)
A Perl interface to the F5 iControl API
Bigtop::Backend::Control(3)
defines legal keywords in control blocks
Bigtop::Backend::Control::Gantry(3)
controller generator for the Gantry framework
Bio::MAGETAB::ControlledTerm(3)
MAGE-TAB controlled term class
CGI::Application::Plugin::Forward(3)
Pass control from one run mode to another
CPS(3), "CPS"(3)
manage flow of control in Continuation-Passing Style
CPS::Governor(3), "CPS::Governor"(3)
control the iteration of the "CPS" functions
Catalyst::Controller(3)
Catalyst Controller base class
Catalyst::Controller::ActionRole(3)
Apply roles to action instances
Catalyst::Controller::BindLex(3)
Stash your lexical goodness
Catalyst::Controller::FormBuilder(3)
Catalyst FormBuilder Base Controller
Catalyst::Controller::HTML::FormFu(3)
Catalyst integration for HTML::FormFu
Catalyst::Controller::Metal(3)
Raw PSGI handling in Catalyst controllers
Catalyst::Controller::REST(3)
A RESTful controller
Catalyst::Controller::RateLimit(3)
Protect your site from robots
Catalyst::Controller::RequestToken(3)
Handling transaction tokens across forms
Catalyst::Controller::SOAP(3)
Catalyst SOAP Controller
Catalyst::Controller::SOAP::DocumentLiteralWrapped(3)
Helper controller for SOAP
Catalyst::Controller::SOAP::RPC(3)
Helper controller for SOAP
Catalyst::Controller::SRU(3)
Dispatch SRU methods with Catalyst
Catalyst::Enzyme::CRUD::Controller(3)
CRUD Controller Base Class with CRUD support
Catalyst::Enzyme::Controller(3)
Enzyme Controller Base Class with utility methods
Catalyst::Helper::Controller::Enzyme::CRUD(3)
Helper for Catalyst::Enzyme CRUD Controllers
Catalyst::Helper::Controller::Scaffold(3)
Helper for Scaffolding
Catalyst::Helper::View::TTControllerLocal(3)
Helper for TTControllerLocal Views
Catalyst::RouteMatching(3), Header "Name" Catalyst::RouteMatching(3)
How Catalyst maps an incoming URL to actions in controllers
Catalyst::ScriptRole(3)
Common functionality for Catalyst scripts
Catalyst::TraitFor::Controller::DBIC::DoesPaging(3)
Helps you paginate, search, sort, and more easily using DBIx::Class
Catalyst::View::TT::ControllerLocal(3)
Catalyst TT View with template names relative to the Controller
CatalystX::Profile::Controller::ControlProfiling(3)
Control profiling within your application
CatalystX::SimpleLogin(3)
Provide a simple Login controller which can be reused
CatalystX::SimpleLogin::Controller::Login(3)
Configurable login controller
CatalystX::SimpleLogin::TraitFor::Controller::Login::Logout(3)
log users out
CatalystX::SimpleLogin::TraitFor::Controller::Login::OpenID(3)
allows a User to login via OpenID
CatalystX::SimpleLogin::TraitFor::Controller::Login::RenderAsTTTemplate(3)
render a login form with no template file
CatalystX::SimpleLogin::TraitFor::Controller::Login::WithRedirect(3)
redirect users who login back to the page they originally requested
DBIx::Class::Migration::RunScript(3)
Control your Perl Migration Run Scripts
DJabberd::Delivery::LocalVHosts(3)
Controlled delivery to other local VHosts
Daemon::Control(3)
Create init scripts in Perl
Data::Flow(3)
Perl extension for simple-minded recipe-controlled build of data
Data::Printer::Config(3)
Load run-control (.dataprinter) files for Data::Printer
Decision::ACL(3)
Manage and Build Access Control Lists
Device::Modem::UsRobotics(3)
USR modems extensions to control self-mode
Event::ExecFlow(3)
High level API for event-based execution flow control
File::Find::Rule::VCS(3)
Exclude files/directories for Version Control Systems
Font::TTF::Cvt_(3)
Control Value Table in a TrueType font
Gantry::Conf::FAQ(3)
Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ script.pl --instance=app1-dev instead of: $ script.pl --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
Gantry::Control(3)
The Core for User Management and Administration
Gantry::Control::C::Access(3)
Authentication by IP
Gantry::Control::C::AuthenBase(3)
Database based authentication
Gantry::Control::C::AuthenCDBI(3)
AuthenBase subclass for normal ORMs
Gantry::Control::C::AuthenRegular(3)
AuthenBase subclass for normal ORMs
Gantry::Control::C::Authz::PageBasedBase(3)
Page based access control
Gantry::Control::C::Authz::PageBasedCDBI(3), Gantry::Control::C::PageBasedCDBI(3)
AuthenBase subclass for CDBI ORMs
Gantry::Control::C::Authz::PageBasedRegular(3), Gantry::Control::C::PageBasedRegular(3)
AuthenBase subclass for normal ORMs
Gantry::Control::C::AuthzBase(3)
Database based authorization
Gantry::Control::C::AuthzCDBI(3)
Database based authorization for Class::DBI
Gantry::Control::C::AuthzRegular(3)
Database based authorization for most ORMs
Gantry::Control::C::Groups(3)
Group management for the Gantry library
Gantry::Control::C::Pages(3)
Page based control adminstration
Gantry::Control::C::Users(3)
User Management
Gantry::Control::Model::GEN::auth_group_members(3)
model for auth_group_members table
Gantry::Control::Model::GEN::auth_groups(3)
model for auth_groups table
Gantry::Control::Model::GEN::auth_pages(3)
model for auth_pages table
Gantry::Control::Model::GEN::auth_users(3)
model for auth_users table
Gantry::Control::Model::auth_group_members(3)
Model Component for auth_group_members table
Gantry::Control::Model::auth_group_members(3)
model for auth_group_members table
Gantry::Control::Model::auth_groups(3)
model for auth_groups table
Gantry::Control::Model::auth_groups_cdbi(3), Gantry::Control::Model::auth_groups-(3)
Model Component for the auth_groups table
Gantry::Control::Model::auth_pages(3)
Model Component for the auth_pages table
Gantry::Control::Model::auth_pages(3)
model for auth_pages table
Gantry::Control::Model::auth_users(3)
Model Component for auth_users Control table
Gantry::Control::Model::auth_users(3)
model for auth_users table
Gantry::Stash::Controller(3)
Stash object for the controller
Gantry::Utils::CRON(3)
a way to call a controller's method from a CRON script
Git::Repository::Tutorial(3)
Control git from Perl using Git::Repository
HTML::Prototype::Controls(3)
script.aculo.us controls library, embedded in perl
IO::Async::Debug(3), "IO::Async::Debug"(3)
debugging control and support for IO::Async
IOC(3)
A lightweight IOC (Inversion of Control) framework
Jifty::Manual::AccessControl(3)
Using Jifty's default ACL system
Jifty::Manual::AccessControl_zhtw(3)
使用 Jifty 預設的 ACL 系統
Jifty::Manual::Logging(3)
Using and controlling Jifty's logging system
Jifty::RightsFrom(3)
Delegate access control to a related object
Jifty::Web::Form::Field::Select(3)
Add a list/popup menu control to your forms
LaTeXML::Core::Definition(3), "LaTeXML::Core::Definition" (3)
Control sequence definitions
LaTeXML::Core::Definition::CharDef(3), "LaTeXML::Core::Definition::CharDef" (3)
Control sequence definitions for chardefs
LaTeXML::Core::Definition::Conditional(3), "LaTeXML::Core::Definition::Conditional" (3)
Conditionals Control sequence definitions
LaTeXML::Core::Definition::Constructor(3), "LaTeXML::Core::Definition::Constructor" (3)
Control sequence definitions
LaTeXML::Core::Definition::Expandable(3), "LaTeXML::Core::Definition::Expandable" (3)
Expandable Control sequence definitions
LaTeXML::Core::Definition::Primitive(3), "LaTeXML::Core::Definition::Primitive" (3)
Primitive Control sequence definitions
LaTeXML::Core::Definition::Register(3), "LaTeXML::Core::Definition::Register" (3)
Control sequence definitions for Registers
MPI_Pcontrol(3)
Controls profiling
MPI_T_category_get_cvars(3)
Query which control variables are in a category
MPI_T_cvar_get_info(3)
Query information from a control variable
MPI_T_cvar_get_num(3)
Query the number of control variables
MPI_T_cvar_read(3)
Read the value of a control variable
MPI_T_cvar_write(3)
Write the value of a bound control variable
MPI_T_pvar_write(3)
Write the value of a control variable
Mock::Quick::Object::Control(3)
Control a mocked object after creation
ModuleTrx.conf(5)
Configuration file for the SvxLink transceiver control module
Mojo::IOLoop::Delay(3)
(DISCOURAGED) Promises/A+ and flow-control helpers
MojoMojo::Controller::Admin(3)
Site Administration
MojoMojo::Controller::Attachment(3)
Attachment controller
MojoMojo::Controller::Comment(3)
MojoMojo Comment controller See MojoMojo
MojoMojo::Controller::Export(3)
Export / Import related controller
MojoMojo::Controller::Gallery(3)
Page gallery
MojoMojo::Controller::Image(3)
Image controller
MojoMojo::Controller::JSON(3)
Various functions that return JSON data
MojoMojo::Controller::Journal(3)
Journaling for MojoMojo?
MojoMojo::Controller::Jsrpc(3)
Various JSRPC functions
MojoMojo::Controller::Page(3)
Page controller
MojoMojo::Controller::PageAdmin(3)
MojoMojo Page Administration
MojoMojo::Controller::Root(3)
Controller to run before all others
MojoMojo::Controller::Tag(3)
Tags controller
MojoMojo::Controller::User(3)
Login/User Management Controller
MojoMojo::Extension(3), Header "Name" MojoMojo::Extension(3)
a base controller class
Mojolicious::Controller(3)
Controller base class
Net::Amazon::S3::Operation::Bucket::Acl::Fetch::Request(3)
An internal class to get a bucket's access control
Net::Amazon::S3::Operation::Bucket::Acl::Set::Request(3)
An internal class to set a bucket's access control
Net::Amazon::S3::Operation::Object::Acl::Fetch::Request(3)
An internal class to get an object's access control
Net::Amazon::S3::Operation::Object::Acl::Set::Request(3)
An internal class to set an object's access control
Net::Frame::Layer::ICMPv6(3)
Internet Control Message Protocol v6 layer object
Net::Frame::Layer::TCP(3)
Transmission Control Protocol layer object
Net::LDAP::Control(3)
LDAPv3 control object base class
Net::LDAP::Control::Assertion(3)
LDAPv3 Assertion Control
Net::LDAP::Control::DontUseCopy(3)
LDAPv3 Don't Use Copy control object
Net::LDAP::Control::EntryChange(3)
LDAPv3 Entry Change Notification control object
Net::LDAP::Control::ManageDsaIT(3)
LDAPv3 Manage DSA-IT control object
Net::LDAP::Control::MatchedValues(3)
LDAPv3 MatchedValues Control
Net::LDAP::Control::NoOp(3)
LDAPv3 Tree Delete control object
Net::LDAP::Control::Paged(3)
LDAPv3 Paged results control object
Net::LDAP::Control::PasswordPolicy(3)
LDAPv3 Password Policy control object
Net::LDAP::Control::PersistentSearch(3)
LDAPv3 Persistent Search control object
Net::LDAP::Control::PostRead(3)
LDAPv3 Post-Read control object
Net::LDAP::Control::PreRead(3)
LDAPv3 Pre-Read control object
Net::LDAP::Control::ProxyAuth(3)
LDAPv3 Proxy Authorization control object
Net::LDAP::Control::Relax(3)
LDAPv3 Relax control object
Net::LDAP::Control::Sort(3)
Server Side Sort (SSS) control object
Net::LDAP::Control::SortResult(3)
Server Side Sort (SSS) result control object
Net::LDAP::Control::Subentries(3)
LDAPv3 Subentries control object
Net::LDAP::Control::SyncDone(3)
LDAPv3 Sync Done control object
Net::LDAP::Control::SyncRequest(3)
LDAPv3 Sync Request control object
Net::LDAP::Control::SyncState(3)
LDAPv3 Sync State control object
Net::LDAP::Control::TreeDelete(3)
LDAPv3 Tree Delete control object
Net::LDAP::Control::VLV(3)
LDAPv3 Virtual List View control object
Net::LDAP::Control::VLVResponse(3)
-- LDAPv3 Virtual List View server response
Net::Packet::ICMPv4(3)
Internet Control Message Protocol v4 layer 4 object
Net::Packet::LLC(3)
Logical-Link Control layer 3 object
Net::Packet::PPPLCP(3)
PPP Link Control Protocol layer 3 object
Net::Packet::TCP(3)
Transmission Control Protocol layer 4 object
Net::RNDC(3)
Speak the BIND Remote Name Daemon Control (RNDC) V1 protocol
Net::UPnP::ControlPoint(3)
Perl extension for UPnP control point
NetPacket::ICMP(3)
Assemble and disassemble ICMP (Internet Control Message Protocol) packets
NetPacket::TCP(3)
Assemble and disassemble TCP (Transmission Control Protocol) packets
Ocsinventory::Agent::Common(3)
give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
OpenXPKI::Crypto::SecretRole(3), OpenXPKI::Server::API2::SecretRole(3)
Base role for all types of 'secrets'
PDF::API3::Compat::API2::Basic::TTF::Cvt_(3)
Control Value Table in a TrueType font
PDL::Exporter(3)
PDL export control
PDL::Perldl2::PrintControl(3), PDL::Perldl2::Plugin::PrintControl(3)
disable default print output
POE::Component::ControlPort(3)
network control port for POE applications
POE::Component::ControlPort::Command(3)
Register control port commands
POE::Component::ControlPort::DefaultCommands(3)
Set of default commands available to the control port
POE::Component::IRC::Plugin::Console(3)
A PoCo-IRC plugin that provides a lightweight debugging and control console for your bot
PPIx::QuoteLike::Token::Control(3)
Represent case and quote control
PPIx::Regexp::Token::Backtrack(3)
Represent backtrack control
PPIx::Regexp::Token::Control(3)
Case and quote control
PToptimizer(1)
Wrapper around control point optimization routines
PTroller(1)
Merge several images into a single one
Paws::ElasticTranscoder::TestRole(3)
Arguments for method TestRole on Paws::ElasticTranscoder
Paws::IAM::GetRole(3)
Arguments for method GetRole on Paws::IAM
Paws::IAM::GetRolePolicy(3)
Arguments for method GetRolePolicy on Paws::IAM
Paws::IAM::ListRolePolicies(3)
Arguments for method ListRolePolicies on Paws::IAM
Paws::IAM::ListRoles(3)
Arguments for method ListRoles on Paws::IAM
Paws::IAM::PutRolePolicy(3)
Arguments for method PutRolePolicy on Paws::IAM
Perl::Critic::Policy::ControlStructures::ProhibitCStyleForLoops(3)
Write "for(0..20)" instead of "for($i=0; $i<=20; $i++)"
Perl::Critic::Policy::ControlStructures::ProhibitCascadingIfElse(3)
Don't write long "if-elsif-elsif-elsif-elsif...else" chains
Perl::Critic::Policy::ControlStructures::ProhibitDeepNests(3)
Don't write deeply nested loops and conditionals
Perl::Critic::Policy::ControlStructures::ProhibitLabelsWithSpecialBlockNames(3)
Don't use labels that are the same as the special block names
Perl::Critic::Policy::ControlStructures::ProhibitMutatingListFunctions(3)
Don't modify "$_" in list functions
Perl::Critic::Policy::ControlStructures::ProhibitNegativeExpressionsInUnlessAndUntilConditions(3)
Don't use operators like "not", "!~", and "le" within "until" and "unless"
Perl::Critic::Policy::ControlStructures::ProhibitPostfixControls(3)
Write "if($condition){ do_something() }" instead of "do_something() if $condition"
Perl::Critic::Policy::ControlStructures::ProhibitUnlessBlocks(3)
Write "if(! $condition)" instead of "unless($condition)"
Perl::Critic::Policy::ControlStructures::ProhibitUnreachableCode(3)
Don't write code after an unconditional "die, exit, or next"
Perl::Critic::Policy::ControlStructures::ProhibitUntilBlocks(3)
Write "while(! $condition)" instead of "until($condition)"
Perl::Critic::Policy::ControlStructures::ProhibitYadaOperator(3)
Never use "..." in production code
Perl::Critic::Policy::Miscellanea::RequireRcsKeywords(3)
Put source-control keywords in every file
Prima::DetailedList(3)
a multi-column list viewer with controlling header widget
Prima::DetailedOutline(3)
a multi-column outline viewer with controlling header widget
Prima::Image::TransparencyControl(3)
standard dialog for transparent color index selection
Proc::Simple(3)
-- launch and control background processes
RTF::Control(3)
Application of RTF::Parser for document conversion
Rcs(3)
Perl Object Class for Revision Control System (RCS)
Reaction::UI::Controller(3)
Reaction Base Controller Class
Reaction::UI::Controller::Collection::CRUD(3)
Basic CRUD functionality for Reaction::InterfaceModel data
Reaction::UI::Controller::Role::Action::Create(3)
Create action
Reaction::UI::Controller::Role::Action::Delete(3)
Delete action
Reaction::UI::Controller::Role::Action::DeleteAll(3)
Delete All action
Reaction::UI::Controller::Role::Action::List(3)
List action
Reaction::UI::Controller::Role::Action::Update(3)
Update action
Reaction::UI::Controller::Role::Action::View(3)
View action
Reaction::UI::Controller::Root(3)
Base component for the Root Controller
Rex::Commands::SCM(3)
Sourcecontrol for Subversion and Git
RunApp::Apache(3)
Apache control for RunApp
RunApp::Apache(3)
Apache control from RunApp
RunApp::Control(3)
Control class for RunApp
RunApp::Control::ApacheCtl(3)
Class for invoking apachectl
RunApp::Control::AppControl(3)
Class for controlling daemon with App::Control
SNMP::Info::Layer2::Airespace(3)
SNMP Interface to Cisco (Airespace) Wireless Controllers
SNMP::Info::Layer2::NWSS2300(3)
SNMP Interface to Avaya (Trapeze) Wireless Controllers
SNMP::Info::Layer2::Trapeze(3)
SNMP Interface to Juniper (Trapeze) Wireless Controllers
SOAP::Data(3)
this class provides the means by which to explicitly manipulate and control all aspects of the way in which Perl data gets expressed as SOAP data entities
SUPER(3)
control superclass method dispatch
SVK(3)
A Distributed Version Control System
SVK::Command::Add(3)
Put files and directories under version control
Scrappy::Queue(3)
Scrappy HTTP Request Flow-Control System
Scrappy::Scraper::Control(3)
Scrappy HTTP Request Constraints System
ShipIt::VC(3)
-- abstract base class for version control systems
Sisimai::Lhost::SurfControl(3)
bounce mail parser class for "SurfControl"
Squatting::Controller(3)
default controller class for Squatting
Syntax::Highlight::Engine::Kate::Debian_Control(3)
a Plugin for Debian Control syntax highlighting
Syntax::Keyword::Gather(3)
Implements the Perl 6 'gather/take' control structure in Perl 5
Term::ANSIScreen(3)
Terminal control using ANSI escape sequences
Term::ReadKey(3)
A perl module for simple terminal control
Test2::EventFacet::Control(3)
Facet for hub actions and behaviors
Test2::Harness::IPC(3)
Base class for modules that control child processes
Test2::Harness::IPC::Process(3)
Base class for processes controlled by Test2::Harness::IPC
Test2::Plugin::SRand(3)
Control the random seed for more controlled test environments
Test::Unit::Debug(3)
framework debugging control
Test::WWW::Selenium(3)
Test applications using Selenium Remote Control
Text::FIGlet::Control(3)
control file support for Text::FIGlet
Text::UnicodeBox::Control(3)
Objects to describe and control rendering
Tickit::WidgetRole::Alignable(3), "Tickit::WidgetRole::Alignable"(3)
implement widgets with adjustable alignment
Time::Warp(3)
control over the flow of time
Tk::CursorControl(3)
Manipulate the mouse cursor programmatically
Tk::Pod::Cache(3)
internal Tk-Pod module for cache control
VCS(3)
Version Control System access in Perl
VCS::File(3)
module for access to a file under version control
VCS::Lite(3)
Minimal version control system
VM::EC2::REST::instance(3)
VM::EC2 methods for controlling instances
Vend::UserControl(3), UserControl.pm(3)
-- Enhanced Interchange User Database Functions
WWW::Selenium(3)
Perl Client for the Selenium Remote Control test tool
XML::DOM2(3), XML::DOM2(3)
DOM controlled, strict XML module for extentable xml objects
XML::DOM2::Element(3), XML::DOM2::Element(3)
XML Element level control
ZoneMinder::Control(3)
Parent class defining Control API
ZoneMinder::Control::Amcrest_HTTP(3)
Amcrest camera control
ZoneMinder::Control::DCS5020L(3)
Perl extension for DCS-5020L
ZoneMinder::Control::Dahua(3)
Perl module for Dahua cameras
ZoneMinder::Control::FI8608W_Y2k(3), ZoneMinder::Control::FI-8608W(3)
Perl extension for FOSCAM FI-8608W by Christophe_Y2k
ZoneMinder::Control::FI8620_Y2k(3), ZoneMinder::Control::FI8620(3)
Perl extension for FOSCAM FI8620
ZoneMinder::Control::FI8908W(3)
Foscam FI8908W camera control
ZoneMinder::Control::FI9821W_Y2k(3), ZoneMinder::Control::FI9821W(3)
Perl extension for FOSCAM FI9821W
ZoneMinder::Control::IPCC7210W(3), ZoneMinder::IPCC-7210W(3)
Perl extension for IPCC-7210W PTZ control
ZoneMinder::Control::MaginonIPC(3)
Zoneminder PTZ control module for the Maginon Supra-IPC 40 IP Camera
ZoneMinder::Control::PSIA(3)
Perl module for cameras implementing the PSIA (Physical Security Interoperability Alliance), IP Media Devices API specification
ZoneMinder::Control::SkyIPCam7xx(3), ZoneMinder::Control::SkyIPCam7xx.pm(3)
Module for controlling AirLink101 SkyIPams
ZoneMinder::Control::Sony(3)
PTZ driver for Sony cameras
ZoneMinder::Control::Toshiba_IK_WB11A(3)
Zoneminder PTZ control module the Toshiba IK-WB11A IP Camera
ZoneMinder::Control::Trendnet(3)
Perl module for Trendnet cameras
ZoneMinder::Control::Vivotek_ePTZ(3)
ZoneMinder Perl extension for Vivotek ePTZ camera control protocol
acme(4)
control files for text windows
adc(nged)
This command controls the angle/distance cursor
antimicro(1)
map keyboard keys and mouse controls to a gamepad
bk-diff(1), bk diff(1)
show differences in revision controlled files
bk-extras(1), bk extras(1)
list extra files not under revision control
bk-gfiles(1), bk gfiles(1)
generate lists of controlled files
bucardo(1)
utility script for controlling the Bucardo program
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
coil(1)
Generate various types of coils, using pipe control points calculated from coil dimensions
ct_master(3)
Distributed test execution control for Common Test
d.mon(1), d.mon (1)
Controls graphics display monitors from the command line
dtspcd(1m)
CDE Subprocess Control Service
dtspcdenv(4)
environment Variable File for the CDE Subprocess Control Service
file_raise(3), file_raise()(3)
controls raising of file_read_err and file_write_err
filetest(3)
Perl pragma to control the filetest permission operators
fish-completions(1)
Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
fish_vcs_prompt(1)
output version control system information for use in a prompt
g.access(1), g.access (1)
Controls access to the current mapset for other users on the system. If no option given, prints current status
g.gui.gcp(1), g.gui.gcp (1)
Georectifies a map and allows managing Ground Control Points
g.gui.image2target(1), g.gui.image2target (1)
Georectifies a map and allows managing Ground Control Points for 3D correction
gajim-remote(1)
a remote control utility for gajim(1)
i.modis.qc(1), i.modis.qc (1)
Extracts quality control parameters from MODIS QC layers
i.ortho.transform(1), i.ortho.transform (1)
Computes a coordinate transformation based on the control points
i.rectify(1), i.rectify (1)
Rectifies an image by computing a coordinate transformation for each pixel in the image based on the control points
keyboard(3), initkeyboard(3), ctlkeyboard(3), closekeyboard(3)
keyboard control
libcursor(3)
cursor control library
m.transform(1), m.transform (1)
Computes a coordinate transformation based on the control points
mdnsctl(8)
control the Multicast Domain Server daemon
mouse(3), initmouse(3), readmouse(3), closemouse(3), moveto(3), cursorswitch(3), getrect(3), drawgetrect(3), menuhit(3), setcursor(3)
mouse control
netdisco-backend(1)
Job Control Daemon for Netdisco
netdisco-backend-fg(1)
Job Control for Netdisco
overloading(3)
perl pragma to lexically control overloading
p(nged)
Provides precise control over primitive editing operations that would normally be done using the mouse or knobs
pods::SDLx::Controller(3), SDLx::Controller(3)
Handles the loops for events, movement and rendering
pods::SDLx::Controller::Interface(3), SDLx::Controller::Interface(3)
Interface Physics and Rendering with the Controller with callbacks
pods::SDLx::Controller::State(3), SDLx::Controller::State(3)
the state of a SDLx::Controller::Interface
pt-show-grants(1)
Canonicalize and print MySQL grants so you can effectively replicate, compare and version-control them
qball(3)
3-d rotation controller
riverctl(1)
command-line interface for controlling river
sccs(1)
front end for the Source Code Control System (SCCS)
sccs-editor(1)
Edit a file whether or not it is controlled by SCCS
sh(1), bosh(1), jsh(1)
standard and job control shell and command interpreter
sh(1), obosh(1), jsh(1)
standard and job control shell and command interpreter
slave(3)
Functions for starting and controlling slave nodes
smt(1)
magnetic tape control
sndioctl(1)
manipulate audio device controls
sort(3)
perl pragma to control sort() behaviour
svk(1)
A Distributed Version Control System
tickit_ctlname(3)
return the name of a toplevel instance control
tickit_getctl_int(3), tickit_setctl_int-(3)
set an integer toplevel instance control
tickit_run(3), tickit_stop(3)
control the event loop of the toplevel instance
tickit_term_ctlname(3)
return the name of a terminal control
tickit_term_set_utf8(3), tickit_term_get_utf8(3)
control UTF-8 mode
tickit_term_setctl_int(3), tickit_term_setctl_str(3)
set an integer or string terminal control
tickit_window_ctlname(3)
return the name of a window control
tickit_window_getctl_int(3), tickit_window_setctl_int-(3)
set an integer window control
tickit_window_set_focus_child_notify(3)
control whether windows are informed of child focus changes
tickit_window_set_steal_input(3)
control whether windows steal all input events
tickit_window_show(3), tickit_window_hide(3)
control a window's visibility
tickit_window_take_focus(3), tickit_window_is_focused(3)
control the input focus
translate(nged)
Used to precisely control the translation of an object in both primitive edit and matrix edit modes
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
tt_trace_control(3)
control client-side tracing
v.rectify(1), v.rectify (1)
Rectifies a vector by computing a coordinate transformation for each object in the vector based on the control points
vc(1)
version control
vmsish(3)
Perl pragma to control VMS-specific language features
warnings(3)
Perl pragma to control optional warnings
wxControl(3)
See external documentation: wxControl
wxControlWithItems(3)
See external documentation: wxControlWithItems
wxPreviewControlBar(3)
See external documentation: wxPreviewControlBar
zsyncmake(1)
Build control file for zsync(1)
home | help