Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ALTQ(4)
alternate queuing of network packets
ALTQ(9)
kernel interfaces for manipulating output queues on network interfaces
BUS_BIND_INTR(9), bus_bind_intr(9)
bind an interrupt resource to a specific CPU
BUS_CONFIG_INTR(9)
configure interrupt polarity and trigger mode
BUS_DESCRIBE_INTR(9), bus_describe_intr(9)
associate a description with an active interrupt handler
BUS_SETUP_INTR(9), bus_setup_intr(9), BUS_TEARDOWN_INTR(9), bus_teardown_intr(9)
create, attach and teardown an interrupt handler
DELAY(9)
busy loop for an interval
DEVICE_IDENTIFY(9)
identify a device, register it
INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3)
SNMP daemon loadable module interface
MODULE_PNP_INFO(9)
register plug and play information for device matching
NgMkSockNode(3), NgNameNode(3), NgSendMsg(3), NgSendAsciiMsg(3), NgSendReplyMsg(3), NgRecvMsg(3), NgAllocRecvMsg(3), NgRecvAsciiMsg(3), NgAllocRecvAsciiMsg(3), NgSendData(3), NgRecvData(3), NgAllocRecvData(3), NgSetDebug(3), NgSetErrLog(3)
netgraph user library
OF_device_from_xref(9), OF_xref_from_device(9), OF_device_register_xref(9)
manage mappings between xrefs and devices
PC(3), UP(3), BC(3), ospeed(3), tgetent(3), tgetflag(3), tgetnum(3), tgetstr(3), tgoto(3), tputs(3)
direct curses interface to the terminfo capability database
SLIST_CLASS_ENTRY(3), SLIST_CLASS_HEAD(3), SLIST_CONCAT(3), SLIST_EMPTY(3), SLIST_ENTRY(3), SLIST_FIRST(3), SLIST_FOREACH(3), SLIST_FOREACH_FROM(3), SLIST_FOREACH_FROM_SAFE(3), SLIST_FOREACH_SAFE(3), SLIST_HEAD(3), SLIST_HEAD_INITIALIZER(3), SLIST_INIT(3), SLIST_INSERT_AFTER(3), SLIST_INSERT_HEAD(3), SLIST_NEXT(3), SLIST_REMOVE(3), SLIST_REMOVE_AFTER(3), SLIST_REMOVE_HEAD(3), SLIST_SWAP(3), STAILQ_CLASS_ENTRY(3), STAILQ_CLASS_HEAD(3), STAILQ_CONCAT(3), STAILQ_EMPTY(3), STAILQ_ENTRY(3), STAILQ_FIRST(3), STAILQ_FOREACH(3), STAILQ_FOREACH_FROM(3), STAILQ_FOREACH_FROM_SAFE(3), STAILQ_FOREACH_SAFE(3), STAILQ_HEAD(3), STAILQ_HEAD_INITIALIZER(3), STAILQ_INIT(3), STAILQ_INSERT_AFTER(3), STAILQ_INSERT_HEAD(3), STAILQ_INSERT_TAIL(3), STAILQ_LAST(3), STAILQ_NEXT(3), STAILQ_REMOVE(3), STAILQ_REMOVE_AFTER(3), STAILQ_REMOVE_HEAD(3), STAILQ_SWAP(3), LIST_CLASS_ENTRY(3), LIST_CLASS_HEAD(3), LIST_CONCAT(3), LIST_EMPTY(3), LIST_ENTRY(3), LIST_FIRST(3), LIST_FOREACH(3), LIST_FOREACH_FROM(3), LIST_FOREACH_FROM_SAFE(3), LIST_FOREACH_SAFE(3), LIST_HEAD(3), LIST_HEAD_INITIALIZER(3), LIST_INIT(3), LIST_INSERT_AFTER(3), LIST_INSERT_BEFORE(3), LIST_INSERT_HEAD(3), LIST_NEXT(3), LIST_PREV(3), LIST_REMOVE(3), LIST_SWAP(3), TAILQ_CLASS_ENTRY(3), TAILQ_CLASS_HEAD(3), TAILQ_CONCAT(3), TAILQ_EMPTY(3), TAILQ_ENTRY(3), TAILQ_FIRST(3), TAILQ_FOREACH(3), TAILQ_FOREACH_FROM(3), TAILQ_FOREACH_FROM_SAFE(3), TAILQ_FOREACH_REVERSE(3), TAILQ_FOREACH_REVERSE_FROM(3), TAILQ_FOREACH_REVERSE_FROM_SAFE(3), TAILQ_FOREACH_REVERSE_SAFE(3), TAILQ_FOREACH_SAFE(3), TAILQ_HEAD(3), TAILQ_HEAD_INITIALIZER(3), TAILQ_INIT(3), TAILQ_INSERT_AFTER(3), TAILQ_INSERT_BEFORE(3), TAILQ_INSERT_HEAD(3), TAILQ_INSERT_TAIL(3), TAILQ_LAST(3), TAILQ_NEXT(3), TAILQ_PREV(3), TAILQ_REMOVE(3), TAILQ_SWAP(3)
implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
VFS(9)
kernel interface to file systems
__iconv_get_list(3), __iconv_free_list(3)
retrieving a list of character encodings supported by iconv(3)
_exit(2)
terminate the calling process
_secure_path(3)
determine if a file appears to be secure
_umtx_op(2)
interface for implementation of userspace threading synchronization primitives
abort(3)
cause abnormal program termination
accept_filter(9), accept_filt_add(9), accept_filt_del(9), accept_filt_generic_mod_event(9), accept_filt_get(9)
filter incoming connections
acl_is_trivial_np(3)
determine whether ACL is trivial
acpi_toshiba(4)
Toshiba HCI interface
add_wch(3), wadd_wch(3), mvadd_wch(3), mvwadd_wch(3), echo_wchar(3), wecho_wchar(3)
add a complex character and rendition to a curses window, then advance the cursor
add_wchstr(3), add_wchnstr(3), wadd_wchstr(3), wadd_wchnstr(3), mvadd_wchstr(3), mvadd_wchnstr(3), mvwadd_wchstr(3), mvwadd_wchnstr(3)
add an array of complex characters (and attributes) to a curses window
addch(3), waddch(3), mvaddch(3), mvwaddch(3), echochar(3), wechochar(3)
add a character (with attributes) to a curses window, then advance the cursor
addchstr(3), addchnstr(3), waddchstr(3), waddchnstr(3), mvaddchstr(3), mvaddchnstr(3), mvwaddchstr(3), mvwaddchnstr(3)
add a string of characters (and attributes) to a curses window
addstr(3), addnstr(3), waddstr(3), waddnstr(3), mvaddstr(3), mvaddnstr(3), mvwaddstr(3), mvwaddnstr(3)
add a string of characters to a curses window and advance cursor
addwstr(3), addnwstr(3), waddwstr(3), waddnwstr(3), mvaddwstr(3), mvaddnwstr(3), mvwaddwstr(3), mvwaddnwstr(3)
add a string of wide characters to a curses window and advance cursor
adv(4)
Advansys ISA/VL/PCI Narrow 8bit SCSI Host adapter driver
adw(4)
Advansys PCI 16bit SCSI Host adapter driver
agp(4)
generic interface to the Accelerated Graphics Port (AGP)
aha(4)
Adaptec SCSI host adapter driver
ahc(4)
Adaptec VL/ISA/PCI SCSI host adapter driver
ahci(4)
Serial ATA Advanced Host Controller Interface driver
ahd(4)
Adaptec PCI/PCI-X Ultra320 SCSI host adapter driver
aibs(4)
ASUSTeK AI Booster ACPI ATK0110 voltage, temperature and fan sensor
altera_avgen(4)
driver for generic Altera Avalon-bus-attached, memory-mapped devices
altera_jtag_uart(4)
driver for the Altera JTAG UART Core
altera_sdcard(4)
driver for the Altera University Program Secure Data Card IP Core
amq(8)
automounter query tool
an(4)
Aironet Communications 4500/4800 wireless network adapter driver
apic(4)
Advanced Programmable Interrupt Controller (APIC) driver
archive_clear_error(3), archive_compression(3), archive_compression_name(3), archive_copy_error(3), archive_errno(3), archive_error_string(3), archive_file_count(3), archive_filter_code(3), archive_filter_count(3), archive_filter_name(3), archive_format(3), archive_format_name(3), archive_position(3), archive_set_error(3)
libarchive utility functions
archive_read_set_filter_option(3), archive_read_set_format_option(3), archive_read_set_option(3), archive_read_set_options(3)
functions controlling options for reading archives
archive_read_support_filter_all(3), archive_read_support_filter_bzip2(3), archive_read_support_filter_compress(3), archive_read_support_filter_gzip(3), archive_read_support_filter_lz4(3), archive_read_support_filter_lzma(3), archive_read_support_filter_none(3), archive_read_support_filter_rpm(3), archive_read_support_filter_uu(3), archive_read_support_filter_xz(3), archive_read_support_filter_zstd(3), archive_read_support_filter_program(3), archive_read_support_filter_program_signature(3)
functions for reading streaming archives
archive_write_add_filter_b64encode(3), archive_write_add_filter_by_name(3), archive_write_add_filter_bzip2(3), archive_write_add_filter_compress(3), archive_write_add_filter_grzip(3), archive_write_add_filter_gzip(3), archive_write_add_filter_lrzip(3), archive_write_add_filter_lz4(3), archive_write_add_filter_lzip(3), archive_write_add_filter_lzma(3), archive_write_add_filter_lzop(3), archive_write_add_filter_none(3), archive_write_add_filter_program(3), archive_write_add_filter_uuencode(3), archive_write_add_filter_xz(3), archive_write_add_filter_zstd(3)
functions enabling output filters
archive_write_set_filter_option(3), archive_write_set_format_option(3), archive_write_set_option(3), archive_write_set_options(3)
functions controlling options for writing archives
archive_write_set_format(3), archive_write_set_format_7zip(3), archive_write_set_format_ar(3), archive_write_set_format_ar_bsd(3), archive_write_set_format_ar_svr4(3), archive_write_set_format_by_name(3), archive_write_set_format_cpio(3), archive_write_set_format_cpio_newc(3), archive_write_set_format_filter_by_ext(3), archive_write_set_format_filter_by_ext_def(3), archive_write_set_format_gnutar(3), archive_write_set_format_iso9660(3), archive_write_set_format_mtree(3), archive_write_set_format_mtree_classic(3), archive_write_set_format_mtree_default(3), archive_write_set_format_pax(3), archive_write_set_format_pax_restricted(3), archive_write_set_format_raw(3), archive_write_set_format_shar(3), archive_write_set_format_shar_dump(3), archive_write_set_format_ustar(3), archive_write_set_format_v7tar(3), archive_write_set_format_warc(3), archive_write_set_format_xar(3), archive_write_set_format_zip(3)
functions for creating archives
asa(1)
interpret carriage-control characters
ascii(7)
octal, hexadecimal, decimal and binary ASCII character sets
asn_get_header(3), asn_put_header(3), asn_put_temp_header(3), asn_commit_header(3), asn_get_integer_raw(3), asn_get_integer(3), asn_put_integer(3), asn_get_octetstring_raw(3), asn_get_octetstring(3), asn_put_octetstring(3), asn_get_null_raw(3), asn_get_null(3), asn_put_null(3), asn_put_exception(3), asn_get_objid_raw(3), asn_get_objid(3), asn_put_objid(3), asn_get_sequence(3), asn_get_ipaddress_raw(3), asn_get_ipaddress(3), asn_put_ipaddress(3), asn_get_uint32_raw(3), asn_put_uint32(3), asn_get_counter64_raw(3), asn_put_counter64(3), asn_get_timeticks(3), asn_put_timeticks(3), asn_skip(3), asn_slice_oid(3), asn_append_oid(3), asn_compare_oid(3), asn_is_suboid(3), asn_oid2str_r(3), asn_oid2str(3)
ASN.1 library for SNMP
at(1), batch(1), atq(1), atrm(1)
queue, examine or delete jobs for later execution
at_quick_exit(3)
registers a cleanup function to run on quick exit
atexit(3)
register a function to be called on exit
atf-sh(1)
interpreter for shell-based test programs
atf-test-program(1)
common interface to ATF test programs
atkbd(4)
the AT keyboard interface
atkbdc(4)
the AT keyboard controller interface
atrun(8)
run jobs queued for later execution
atse(4)
driver for the Altera Triple-Speed Ethernet MegaCore
attimer(4)
i8254 Programmable Interval Timer (AT Timer) driver
attroff(3), wattroff(3), attron(3), wattron(3), attrset(3), wattrset(3), color_set(3), wcolor_set(3), standend(3), wstandend(3), standout(3), wstandout(3), attr_get(3), wattr_get(3), attr_off(3), wattr_off(3), attr_on(3), wattr_on(3), attr_set(3), wattr_set(3), chgat(3), wchgat(3), mvchgat(3), mvwchgat(3), PAIR_NUMBER(3)
curses character and window attribute control routines
au_get_state(3), au_notify_initialize(3), au_notify_terminate(3)
audit event notification
audit_control(5)
audit system parameters
auditctl(2)
configure system audit parameters
auditon(2)
configure system audit parameters
auto_master(5)
auto_master and map file format
autofs(5)
automounter filesystem
awk(1)
pattern-directed scanning and processing language
banner(6)
print large banner on printer
baudrate(3), erasechar(3), erasewchar(3), has_ic(3), has_il(3), killchar(3), killwchar(3), longname(3), term_attrs(3), termattrs(3), termname(3)
curses environment query routines
bce(4)
QLogic NetXtreme II (BCM5706/5708/5709/5716) PCI/PCIe Gigabit Ethernet adapter driver
bhnd(4)
Broadcom Home Networking Division interconnect bus
bhnd(9)
BHND driver programming interface
bhndb(4)
Broadcom Home Networking Division interconnect bridge driver
bios(9), bios_sigsearch(9), bios32_SDlookup(9), bios32(9), bios_oem_strings(9)
interact with PC BIOS
bootparamd(8)
boot parameter server
bootparams(5)
boot parameter database
bootpd(8), bootpgw(8)
Internet Boot Protocol server/gateway
bootptab(5)
Internet Bootstrap Protocol server database
border_set(3), wborder_set(3), box_set(3), hline_set(3), whline_set(3), mvhline_set(3), mvwhline_set(3), vline_set(3), wvline_set(3), mvvline_set(3), mvwvline_set(3)
create curses borders or lines using complex characters and renditions
bpf(4)
Berkeley Packet Filter
bpf(9)
Berkeley Packet Filter
bt(4)
Buslogic/Mylex MultiMaster SCSI host adapter driver
bt_gethostbyname(3), bt_gethostbyaddr(3), bt_gethostent(3), bt_sethostent(3), bt_endhostent(3), bt_getprotobyname(3), bt_getprotobynumber(3), bt_getprotoent(3), bt_setprotoent(3), bt_endprotoent(3), bt_aton(3), bt_ntoa(3), bt_devaddr(3), bt_devname(3), bt_devinfo(3), bt_devenum(3), bt_devopen(3), bt_devclose(3), bt_devsend(3), bt_devrecv(3), bt_devreq(3), bt_devfilter(3), bt_devfilter_pkt_set(3), bt_devfilter_pkt_clr(3), bt_devfilter_pkt_tst(3), bt_devfilter_evt_set(3), bt_devfilter_evt_clr(3), bt_devfilter_evt_tst(3), bt_devinquiry(3), bt_devremote_name(3), bt_devremote_name_gen(3), bdaddr_same(3), bdaddr_any(3), bdaddr_copy(3)
Bluetooth routines
btowc(3), wctob(3)
convert between wide and single-byte characters
bus_dma(9), bus_dma_tag_create(9), bus_dma_tag_destroy(9), bus_dmamap_create(9), bus_dmamap_destroy(9), bus_dmamap_load(9), bus_dmamap_load_bio(9), bus_dmamap_load_ccb(9), bus_dmamap_load_mbuf(9), bus_dmamap_load_mbuf_sg(9), bus_dmamap_load_uio(9), bus_dmamap_unload(9), bus_dmamap_sync(9), bus_dmamem_alloc(9), bus_dmamem_free(9)
Bus and Machine Independent DMA Mapping Interface
bxe(4)
QLogic NetXtreme II Ethernet 10Gb PCIe adapter driver
cal(1), ncal(1)
displays a calendar and the date of Easter
call_once(3), cnd_broadcast(3), cnd_destroy(3), cnd_init(3), cnd_signal(3), cnd_timedwait(3), cnd_wait(3), mtx_destroy(3), mtx_init(3), mtx_lock(3), mtx_timedlock(3), mtx_trylock(3), mtx_unlock(3), thrd_create(3), thrd_current(3), thrd_detach(3), thrd_equal(3), thrd_exit(3), thrd_join(3), thrd_sleep(3), thrd_yield(3), tss_create(3), tss_delete(3), tss_get(3), tss_set(3)
C11 threads interface
callout_active(9), callout_deactivate(9), callout_async_drain(9), callout_drain(9), callout_handle_init(9), callout_init(9), callout_init_mtx(9), callout_init_rm(9), callout_init_rw(9), callout_pending(9), callout_reset(9), callout_reset_curcpu(9), callout_reset_on(9), callout_reset_sbt(9), callout_reset_sbt_curcpu(9), callout_reset_sbt_on(9), callout_schedule(9), callout_schedule_curcpu(9), callout_schedule_on(9), callout_schedule_sbt(9), callout_schedule_sbt_curcpu(9), callout_schedule_sbt_on(9), callout_stop(9), callout_when(9), timeout(9), untimeout(9)
execute a function after a specified length of time
cap_enter(2), cap_getmode(2)
Capability mode system calls
ceil(3), ceilf(3), ceill(3)
smallest integral value greater than or equal to x
cfgetispeed(3), cfsetispeed(3), cfgetospeed(3), cfsetospeed(3), cfsetspeed(3), cfmakeraw(3), cfmakesane(3), tcgetattr(3), tcsetattr(3)
manipulating the termios structure
cfi(4), cfid(4)
driver for Common Flash Interface (CFI) NOR flash
check_utility_compat(3)
determine whether a utility should be compatible
ciss(4)
Common Interface for SCSI-3 Support driver
clock(3)
determine processor time used
col(1)
filter reverse line feeds from input
config_intrhook(9)
schedule a function to be run after interrupts have been enabled, but before root is mounted
counter(9)
SMP-friendly kernel counter implementation
cr_cansee(9)
determine visibility of objects given their user credentials
cr_seeothergids(9)
determine visibility of objects given their group memberships
cr_seeotheruids(9)
determine visibility of objects given their user credentials
critical_enter(9), critical_exit(9)
enter and exit a critical region
ctermid(3)
generate terminal pathname
curpriority_cmp(9), maybe_resched(9), resetpriority(9), roundrobin(9), roundrobin_interval(9), sched_setup(9), schedclock(9), schedcpu(9), setrunnable(9), updatepri(9)
perform round-robin scheduling of runnable processes
cuse(3), libcuse(3)
Userland character device library
cxgb(4)
Chelsio T3 10 Gigabit Ethernet adapter driver
cxgbe(4)
Chelsio T4-, T5-, and T6-based 100Gb, 40Gb, 25Gb, 10Gb, and 1Gb Ethernet adapter driver
cyapa(4)
Cypress APA trackpad with I2C interface driver
daemon(8)
run detached from the controlling terminal
dconschat(8)
user interface to dcons(4)
ddb(4)
interactive kernel debugger
del_curterm(3), mvcur(3), putp(3), restartterm(3), set_curterm(3), setterm(3), setupterm(3), tigetflag(3), tigetnum(3), tigetstr(3), tiparm(3), tparm(3), tputs(3), vid_attr(3), vid_puts(3), vidattr(3), vidputs(3)
curses interfaces to terminfo database
delay_output(3), filter(3), flushinp(3), getwin(3), key_name(3), keyname(3), nofilter(3), putwin(3), unctrl(3), use_env(3), use_tioctl(3), wunctrl(3)
miscellaneous curses utility routines
delch(3), wdelch(3), mvdelch(3), mvwdelch(3)
delete character under the cursor in a curses window
devctl(4)
device event reporting and device control interface
devstat(9), devstat_add_entry(9), devstat_end_transaction(9), devstat_end_transaction_bio(9), devstat_end_transaction_bio_bt(9), devstat_remove_entry(9), devstat_start_transaction(9), devstat_start_transaction_bio(9)
kernel interface for keeping device statistics
devtoname(9)
converts character device into a string indicating the device name
digittoint(3)
convert a numeric character to its integer value
digittoint(3), isalnum(3), isalpha(3), isascii(3), isblank(3), iscntrl(3), isdigit(3), isgraph(3), ishexnumber(3), isideogram(3), islower(3), isnumber(3), isphonogram(3), isprint(3), ispunct(3), isrune(3), isspace(3), isspecial(3), isupper(3), isxdigit(3), toascii(3), tolower(3), toupper(3)
character classification functions
digittoint_l(3), isalnum_l(3), isalpha_l(3), isascii_l(3), isblank_l(3), iscntrl_l(3), isdigit_l(3), isgraph_l(3), ishexnumber_l(3), isideogram_l(3), islower_l(3), isnumber_l(3), isphonogram_l(3), isprint_l(3), ispunct_l(3), isrune_l(3), isspace_l(3), isspecial_l(3), isupper_l(3), isxdigit_l(3), tolower_l(3), toupper_l(3)
character classification functions
disc(4)
software discard network interface
dl_iterate_phdr(3)
iterate over program headers
dllockinit(3)
register thread locking methods with the dynamic linker
dlopen(3), fdlopen(3), dlsym(3), dlfunc(3), dlerror(3), dlclose(3)
programmatic interface to the dynamic linker
drbr(9), drbr_free(9), drbr_enqueue(9), drbr_dequeue(9), drbr_dequeue_cond(9), drbr_flush(9), drbr_empty(9), drbr_inuse(9)
network driver interface to buf_ring
dwarf_get_fde_info_for_all_regs(3)
retrieve register rule row
dwarf_get_fde_info_for_all_regs3(3)
retrieve register rule row
dwarf_get_fde_info_for_cfa_reg3(3), dwarf_get_fde_info_for_cfa_regs3(3)
retrieve a CFA register rule
dwarf_get_fde_info_for_reg(3)
retrieve register rule
dwarf_get_fde_info_for_reg3(3)
retrieve register rule
dwarf_reset_section_bytes(3)
reset the internal state of a producer instance
dwarf_set_frame_cfa_value(3), dwarf_set_frame_rule_initial_value(3), dwarf_set_frame_rule_table_size(3), dwarf_set_frame_same_value(3), dwarf_set_frame_undefined_value(3)
set internal register rule table parameters
dwarf_seterrarg(3), dwarf_seterrhand(3)
configure error handling
easterg(3), easterog(3), easteroj(3), gdate(3), jdate(3), ndaysg(3), ndaysj(3), week(3), weekday(3)
Calendar arithmetic for the Christian era
edsc(4)
Ethernet discard network interface
efi(8), UEFI(8)
Unified Extensible Firmware Interface bootstrapping procedures
efivar(8)
UEFI environment variable interaction
elf_fill(3)
set fill byte for inter-section padding
elf_getdata(3), elf_newdata(3), elf_rawdata(3)
iterate through or allocate section data
elf_kind(3)
determine ELF file type
elf_rawfile(3)
return uninterpreted contents of an ELF file
elf_strptr(3)
retrieve a string pointer in a string table
em(4)
Intel(R) PRO/1000 Gigabit Ethernet adapter driver
ena(4)
FreeBSD kernel driver for Elastic Network Adapter (ENA) family
enc(4)
Encapsulating Interface
epair(4)
A pair of virtual back-to-back connected Ethernet interfaces
epoch(9), epoch_context(9), epoch_alloc(9), epoch_free(9), epoch_enter(9), epoch_exit(9), epoch_wait(9), epoch_call(9), in_epoch(9)
kernel epoch based reclamation
euc(5)
EUC encoding of wide characters
exit(3), _Exit(3)
perform normal program termination
fdcontrol(8)
display and modify floppy disk parameters
ffclock_getcounter(2), ffclock_getestimate(2), ffclock_setestimate(2)
Retrieve feed-forward counter, get and set feed-forward clock estimates
fgetc(3), getc(3), getc_unlocked(3), getchar(3), getchar_unlocked(3), getw(3)
get next character or word from input stream
fgetwc(3), getwc(3), getwchar(3)
get next wide character from input stream
fgetwln(3)
get a line of wide characters from a stream
fgetws(3)
get a line of wide characters from a stream
fifolog_create(1), fifolog_writer(1), fifolog_reader(1)
initialize, write, seek and extract data from a fifolog
file(1)
determine file type
firmware_register(9), firmware_unregister(9), firmware_get(9), firmware_put(9)
firmware image loading and management
fmt(1)
simple text formatter
fnmatch(3)
test whether a filename or pathname matches a shell-style pattern
form_field_info(3)
retrieve field characteristics
form_field_just(3)
retrieve field characteristics
fortune(6)
print a random, hopefully interesting, adage
fpgetround(3), fpsetround(3), fpsetprec(3), fpgetprec(3), fpgetmask(3), fpsetmask(3), fpgetsticky(3), fpresetsticky(3)
IEEE floating point interface
fputc(3), putc(3), putc_unlocked(3), putchar(3), putchar_unlocked(3), putw(3)
output a character or word to a stream
fputwc(3), putwc(3), putwchar(3)
output a wide character to a stream
fputws(3)
output a line of wide characters to a stream
free_mntarg(9), kernel_mount(9), kernel_vmount(9), mount_arg(9), mount_argb(9), mount_argf(9), mount_argsu(9)
functions provided as part of the kernel mount interface
fsck(8)
file system consistency check and interactive repair
fsck_ffs(8), fsck_ufs(8)
file system consistency check and interactive repair
fstyp(8)
determine filesystem type
ftp(1)
Internet file transfer program
ftp-proxy(8)
Internet File Transfer Protocol proxy daemon
ftpd(8)
Internet File Transfer Protocol server
gdb(4)
external kernel debugger
get_cyclecount(9)
get the CPU's fast counter register contents
get_wch(3), wget_wch(3), mvget_wch(3), mvwget_wch(3), unget_wch(3)
get (or push back) a wide character from curses terminal keyboard
get_wstr(3), getn_wstr(3), wget_wstr(3), wgetn_wstr(3), mvget_wstr(3), mvgetn_wstr(3), mvwget_wstr(3), mvwgetn_wstr(3)
get an array of wide characters from a curses terminal keyboard
getcchar(3), setcchar(3)
Get a wide character string and rendition from a cchar_t or set a cchar_t from a wide-character string
getch(3), wgetch(3), mvgetch(3), mvwgetch(3), ungetch(3), has_key(3)
get (or push back) characters from curses terminal keyboard
getifaddrs(3)
get interface addresses
getitimer(2), setitimer(2)
get/set value of interval timer
getopt(3)
get option character from command line argument list
getstr(3), getnstr(3), wgetstr(3), wgetnstr(3), mvgetstr(3), mvgetnstr(3), mvwgetstr(3), mvwgetnstr(3)
accept character strings from curses terminal keyboard
getty(8)
set terminal mode
gettytab(5)
terminal configuration data base
gif(4)
generic tunnel interface
glob(3), globfree(3)
generate pathnames matching a pattern
gptboot(8)
GPT bootcode for UFS on BIOS-based computers
gptzfsboot(8)
GPT bootcode for ZFS on BIOS-based computers
grantpt(3), ptsname(3), unlockpt(3)
pseudo-terminal access functions
grep(1), egrep(1), fgrep(1), rgrep(1)
file pattern searcher
grep(1), egrep(1), fgrep(1), zgrep(1), zegrep(1), zfgrep(1), bzgrep(1), bzegrep(1), bzfgrep(1)
print lines matching a pattern
gss_canonicalize_name(3)
Convert an internal name to an MN
gss_compare_name(3)
Compare two internal-form names
gss_context_time(3)
Determine for how long a context will remain valid
gss_display_name(3)
Convert internal-form name to text
gss_duplicate_name(3)
Create a copy of an internal name
gss_import_name(3)
Convert a contiguous string name to internal-form
gss_indicate_mechs(3)
Determine available underlying authentication mechanisms
gss_release_name(3)
Discard an internal-form name
gss_test_oid_set_member(3)
Determines whether an object identifier is a member of a set
gss_wrap_size_limit(3)
Determine maximum message sizes
has_mouse(3), getmouse(3), ungetmouse(3), mousemask(3), wenclose(3), mouse_trafo(3), wmouse_trafo(3), mouseinterval(3)
mouse interface through curses
heim_ntlm_build_ntlm1_master(3), Heimdal(3)
NTLM library
hhook(9), hhook_head_register(9), hhook_head_deregister(9), hhook_head_deregister_lookup(9), hhook_run_hooks(9), HHOOKS_RUN_IF(9), HHOOKS_RUN_LOOKUP_IF(9)
Helper Hook Framework
hme(4)
Sun Microelectronics STP2002-STQ Ethernet interfaces device driver
hostapd_cli(8)
text-based frontend program for interacting with hostapd(8)
hptnr(4)
HighPoint DC Series Data Center HBA card driver
hwpmc(4)
Hardware Performance Monitoring Counter support
ibnd_iter_nodes(3), ibnd_iter_nodes_type(3)
given a fabric object and a function itterate over the nodes in the fabric
ibv_reg_mr(3), ibv_dereg_mr(3)
register or deregister a memory region (MR)
ibv_rereg_mr(3)
re-register a memory region (MR)
ichwd(4)
device driver for the Intel ICH watchdog interrupt timer
icmp(4)
Internet Control Message Protocol
icmp6(4)
Internet Control Message Protocol for IPv6
iconv_canonicalize(3)
resolving character encoding names to canonical form
iconvlist(3)
retrieving a list of character encodings supported by iconv(3)
if_ipsec(4)
IPsec virtual tunneling interface
if_nametoindex(3), if_indextoname(3), if_nameindex(3), if_freenameindex(3)
provide mappings between interface names and indexes
if_ntb(4)
Virtual Ethernet interface for Non-Transparent Bridges
ifconfig(8)
configure network interface parameters
iflib(4)
Network Interface Driver Framework
iflib(9)
Network Interface Driver Framework
ifmcstat(8)
dump multicast group management statistics per interface
ifmib(4)
Management Information Base for network interfaces
ifnet(9), ifaddr(9), ifqueue(9), if_data(9)
kernel interfaces for manipulating network interfaces
igmp(4)
Internet Group Management Protocol
in_wch(3), mvin_wch(3), mvwin_wch(3), win_wch(3)
extract a complex character and rendition from a window
in_wchstr(3), in_wchnstr(3), win_wchstr(3), win_wchnstr(3), mvin_wchstr(3), mvin_wchnstr(3), mvwin_wchstr(3), mvwin_wchnstr(3)
get an array of complex characters and renditions from a curses window
inch(3), winch(3), mvinch(3), mvwinch(3)
get a character and attributes from a curses window
inchstr(3), inchnstr(3), winchstr(3), winchnstr(3), mvinchstr(3), mvinchnstr(3), mvwinchstr(3), mvwinchnstr(3)
get a string of characters (and attributes) from a curses window
index(3), rindex(3)
locate character in string
inet(4)
Internet protocol family
inet6(4)
Internet protocol version 6 family
inet_aton(3), inet_addr(3), inet_network(3), inet_ntoa(3), inet_ntoa_r(3), inet_ntop(3), inet_pton(3), inet_makeaddr(3), inet_lnaof(3), inet_netof(3)
Internet address manipulation routines
inet_net_ntop(3), inet_net_pton(3)
Internet network number manipulation routines
inetd(8)
internet super-server
inetd.conf(5), inetd(5)
internet super-server
initscr(3), newterm(3), endwin(3), isendwin(3), set_term(3), delscreen(3)
curses screen initialization and manipulation routines
ins_wch(3), mvins_wch(3), mvwins_wch(3), wins_wch(3)
insert a complex character and rendition into a window
ins_wstr(3), ins_nwstr(3), wins_wstr(3), wins_nwstr(3), mvins_wstr(3), mvins_nwstr(3), mvwins_wstr(3), mvwins_nwstr(3)
insert a wide-character string into a curses window
insch(3), winsch(3), mvinsch(3), mvwinsch(3)
insert a character before cursor in a curses window
instr(3), innstr(3), winstr(3), winnstr(3), mvinstr(3), mvinnstr(3), mvwinstr(3), mvwinnstr(3)
get a string of characters from a curses window
intro(9)
introduction to system kernel interfaces
inwstr(3), innwstr(3), winwstr(3), winnwstr(3), mvinwstr(3), mvinnwstr(3), mvwinwstr(3), mvwinnwstr(3)
get a string of wchar_t characters from a curses window
ip(4)
Internet Protocol
ip6(4)
Internet Protocol version 6 (IPv6) network layer
ipcs(1)
report System V interprocess communication facilities status
ipf(4)
packet filtering kernel interface
ipf(5), ipf.conf(5)
IPFilter firewall rules file format
ipf(8)
alters packet filtering lists for IP packet input and output
ipfilter(4)
Introduction to IP packet filtering
ipfilter(5), IP(5)
Filter
ipfstat(8)
reports on packet filter statistics and filter list
ipfw(4)
IP packet filter and traffic accounting
ipfw(8)
User interface for firewall, traffic shaper, packet scheduler, in-kernel NAT
ipmi(4)
OpenIPMI compatible IPMI interface driver
ipnat(4)
Network Address Translation kernel interface
ipnat(5), ipnat.conf(5)
IPFilter NAT file format
ipnat(8)
user interface to the NAT subsystem
ippool(8)
user interface to the IPFilter pools
iprop(8), ipropd-master(8), ipropd-slave(8)
propagate changes to a Heimdal Kerberos master KDC to slave KDCs
ipsec(4)
Internet Protocol Security protocol
is_term_resized(3), resize_term(3), resizeterm(3)
change the curses terminal size
isalnum(3)
alphanumeric character test
isalpha(3)
alphabetic character test
isascii(3)
test for ASCII character
isblank(3)
space or tab character test
iscntrl(3)
control character test
isdigit(3), isnumber(3)
decimal-digit character test
isgraph(3)
printing character test (space character exclusive)
isgreater(3), isgreaterequal(3), isless(3), islessequal(3), islessgreater(3), isunordered(3)
compare two floating-point numbers
isideogram(3)
ideographic character test
isl(4)
Intersil(TM) I2C ISL29018 sensor driver
islower(3)
lower-case character test
isoboot(8)
Boot code for hybrid ISO/USB images on BIOS-based computers
isp(4)
Qlogic based SPI and FibreChannel SCSI Host Adapters
ispfw(4)
Firmware for Qlogic based SPI and FibreChannel SCSI Host Adapters
isphonogram(3)
phonographic character test
isprint(3)
printing character test (space character inclusive)
ispunct(3)
punctuation character test
isrune(3)
valid character test
isspace(3)
white-space character test
isspecial(3)
special character test
isupper(3)
upper-case character test
iswalnum(3), iswalpha(3), iswascii(3), iswblank(3), iswcntrl(3), iswdigit(3), iswgraph(3), iswhexnumber(3), iswideogram(3), iswlower(3), iswnumber(3), iswphonogram(3), iswprint(3), iswpunct(3), iswrune(3), iswspace(3), iswspecial(3), iswupper(3), iswxdigit(3)
wide character classification utilities
iswalnum_l(3), iswalpha_l(3), iswcntrl_l(3), iswctype_l(3), iswdigit_l(3), iswgraph_l(3), iswlower_l(3), iswprint_l(3), iswpunct_l(3), iswspace_l(3), iswupper_l(3), iswxdigit_l(3), towlower_l(3), towupper_l(3), wctype_l(3), iswblank_l(3), iswhexnumber_l(3), iswideogram_l(3), iswnumber_l(3), iswphonogram_l(3), iswrune_l(3), iswspecial_l(3), nextwctype_l(3), towctrans_l(3), wctrans_l(3)
wide character classification utilities
iswctype(3), wctype(3)
wide character class functions
isxdigit(3), ishexnumber(3)
hexadecimal-digit character test
ithread_add_handler(9), ithread_create(9), ithread_destroy(9), ithread_priority(9), ithread_remove_handler(9), ithread_schedule(9)
kernel interrupt threads
kdigest(8)
userland tool to access digest interface in the KDC
keyboard(4)
pc keyboard interface
kill(1)
terminate or signal a process
kqueue_add_filteropts(9), kqueue_del_filteropts(9), kqfd_register(9), knote_fdclose(9), knlist_init(9), knlist_init_mtx(9), knlist_init_rw_reader(9), knlist_add(9), knlist_remove(9), knlist_remove_inevent(9), knlist_empty(9), knlist_clear(9), knlist_delete(9), knlist_destroy(9), KNOTE_LOCKED(9), KNOTE_UNLOCKED(9)
event delivery subsystem
krb5_crypto_getblocksize(3), krb5_crypto_getconfoundersize krb5_crypto_getenctype(3), krb5_crypto_getpadsize(3), krb5_crypto_overhead(3), krb5_decrypt(3), krb5_decrypt_EncryptedData(3), krb5_decrypt_ivec(3), krb5_decrypt_ticket(3), krb5_encrypt(3), krb5_encrypt_EncryptedData(3), krb5_encrypt_ivec(3), krb5_enctype_disable(3), krb5_enctype_keysize(3), krb5_enctype_to_string(3), krb5_enctype_valid(3), krb5_get_wrapped_length(3), krb5_string_to_enctype(3)
encrypt and decrypt data, set and get encryption type parameters
krb5_get_init_creds(3), krb5_get_init_creds_keytab(3), krb5_get_init_creds_opt(3), krb5_get_init_creds_opt_alloc(3), krb5_get_init_creds_opt_free(3), krb5_get_init_creds_opt_init(3), krb5_get_init_creds_opt_set_address_list(3), krb5_get_init_creds_opt_set_addressless(3), krb5_get_init_creds_opt_set_anonymous(3), krb5_get_init_creds_opt_set_default_flags(3), krb5_get_init_creds_opt_set_etype_list(3), krb5_get_init_creds_opt_set_forwardable(3), krb5_get_init_creds_opt_set_pa_password(3), krb5_get_init_creds_opt_set_paq_request(3), krb5_get_init_creds_opt_set_preauth_list(3), krb5_get_init_creds_opt_set_proxiable(3), krb5_get_init_creds_opt_set_renew_life(3), krb5_get_init_creds_opt_set_salt(3), krb5_get_init_creds_opt_set_tkt_life(3), krb5_get_init_creds_opt_set_canonicalize(3), krb5_get_init_creds_opt_set_win2k(3), krb5_get_init_creds_password(3), krb5_prompt(3), krb5_prompter_posix(3)
Kerberos 5 initial authentication functions
krb5_principal_intro(3)
The principal handing functions. A Kerberos principal is a email address looking string that contains to parts separeted by a @. The later part is the kerbero realm the principal belongs to and the former is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
kstash(8)
store the KDC master password in a file
ksyms(4)
kernel symbol table interface
kvm(3)
kernel memory interface
kvm_geterr(3)
get error message on kvm descriptor
lagg(4)
link aggregation and link failover interface
ldint(7)
GNU Linker Internals
le(4)
AMD Am7900 LANCE and Am79C9xx ILACC/PCnet Ethernet interface driver
lessecho(1)
expand metacharacters
lge(4)
Level 1 LXT1001 NetCellerator PCI Gigabit Ethernet adapter driver
libarchive_changes(3)
changes in libarchive interface
libarchive_internals(3)
description of libarchive internal interfaces
libmemstat(3)
library interface to retrieve kernel memory allocator statistics
libugidfw(3)
library interface to the file system firewall MAC policy
link(5)
dynamic loader and link editor interface
lo(4)
software loopback network interface
lock(1)
reserve a terminal
login(1)
log into the computer
lp(4)
printer port Internet Protocol driver
lpbb(4)
parallel port I2C bit-banging interface
lpc(8)
line printer control program
lpd(8)
line printer spooler daemon
lprm(1)
remove jobs from the line printer spooling queue
lpt(4)
generic printer device driver
lptcontrol(8)
a utility for manipulating the lpt printer driver
lptest(1)
generate lineprinter ripple pattern
mac_ifoff(4)
interface silencing policy
mac_lomac(4)
Low-watermark Mandatory Access Control data integrity policy
magic(5)
file command's magic pattern file
mandoc_char(7)
mandoc special characters
mblen(3)
get number of bytes in a character
mbrlen(3)
get number of bytes in a character (restartable)
mbrtowc(3), mbrtoc16(3), mbrtoc32(3)
convert a character to a wide-character code (restartable)
mbsinit(3)
determine conversion object status
mbsrtowcs(3), mbsnrtowcs(3)
convert a character string to a wide-character string (restartable)
mbstowcs(3)
convert a character string to a wide-character string
mbtowc(3)
convert a character to a wide-character code
mcprint(3)
ship binary data to printer
mdio(4)
IEEE 802.3 Management Data Input/Output interface
memccpy(3)
copy string until character found
menu_pattern(3)
get and set a menu's pattern buffer
mergemaster(8)
merge configuration files, et al during an upgrade
meteor(4)
video capture driver interface
miibus(4)
IEEE 802.3 Media Independent Interface network bus
mincore(2)
determine residency of memory pages
mkfilters(1)
generate a minimal firewall ruleset for ipfilter
mlx4en(4)
Mellanox ConnectX-3 10GbE/40GbE network adapter driver
mlx4ib(4)
Mellanox ConnectX-3 10GbE/40GbE network adapter driver
mlx5en(4)
Mellanox ConnectX-4, ConnectX-4 LX and ConnectX-5 based 100Gb, 50Gb, 40Gb, 25Gb and 10Gb Ethernet adapter driver
mlx5ib(4)
Mellanox ConnectX-4 and ConnectX-4 LX based 100Gb, 50Gb, 40Gb, 25Gb and 10Gb network adapter driver
mlx5io(4)
IOCTL interface to manage Connect-X 4/5 Mellanox network adapters
mlx5tool(8)
Utility for managing Connect-X 4/5 Mellanox network adapters
msk(4)
Marvell/SysKonnect Yukon II Gigabit Ethernet adapter driver
mtio(4)
FreeBSD magtape interface
multibyte(3)
multibyte and wide character manipulation functions
mxge(4)
Myricom Myri10GE 10 Gigabit Ethernet adapter driver
ncv(4)
NCR 53C500 based SCSI host adapter driver
net80211(4)
standard interface to IEEE 802.11 devices
new_prescr(3)
curses screen-pointer extension
nextafter(3), nextafterf(3), nextafterl(3), nexttoward(3), nexttowardf(3), nexttowardl(3)
next representable value
nextboot(8)
specify an alternate kernel and boot flags for the next reboot
nextwctype(3)
iterate through character classes
ng_bpf(4)
Berkeley packet filter netgraph node type
ng_eiface(4)
generic Ethernet interface netgraph node type
ng_etf(4)
Ethertype filtering netgraph node type
ng_gif(4)
generic tunnel interface netgraph node type
ng_hci(4)
Netgraph node type that is also a Bluetooth Host Controller Interface (HCI) layer
ng_iface(4)
interface netgraph node type
ng_ipfw(4)
interface between netgraph and IP firewall
nge(4)
National Semiconductor PCI Gigabit Ethernet adapter driver
nice(1)
execute a utility at an altered scheduling priority
nl(1)
line numbering filter
nmdm(4)
nullmodem terminal driver
nsp(4)
Workbit Ninja SCSI-3 based PC-Card SCSI host adapter driver
ntp_adjtime(2), ntp_gettime(2)
Network Time Protocol (NTP) daemon interface system calls
oce(4)
Device driver for Emulex OneConnect 10Gb network adapters
ocs_fc(4)
Device driver for Emulex Fibre Channel Host Adapters
openpam_straddch(3)
add a character to a string, expanding the buffer if needed
openpty(3), forkpty(3)
auxiliary functions to obtain a pseudo-terminal
osd(9), osd_register(9), osd_deregister(9), osd_set(9), osd_reserve(9), osd_set_reserved(9), osd_free_reserved(9), osd_get(9), osd_del(9), osd_call(9), osd_exit(9)
Object Specific Data
owll(9), owll OWLL_WRITE_ONE(9), OWLL_WRITE_ZERO(9), OWLL_READ_DATA(9), OWLL_REASET_AND_PRESENCE(9)
Dallas Semiconductor 1-Wire Link Layer Interface
own(9), own_send_command(9), own_commmand_wait(9), own_self_command(9), own_acquire_bus(9), own crc(9), own_release_bus(9), OWN_ACQUIRE_BUS(9), OWN_CRC(9), OWN_RELEASE_BUS(9), OWN_SEND_COMMAND(9)
Dallas Semiconductor 1-Wire Network and Transport Interface
p_candebug(9)
determine debuggability of a process
p_cansee(9)
determine visibility of a process
pac(8)
printer/plotter accounting information
pam_end(3)
terminate the PAM transaction
passwd(5), master.passwd(5)
format of the password file
pawd(1)
print automounter working directory
pcap_compile(3)
compile a filter expression
pcap_geterr(3), pcap_perror(3)
get or print libpcap error message text
pcap_offline_filter(3)
check whether a filter matches a packet
pcap_open_dead(3), pcap_open_dead_with_tstamp_precision(3)
open a fake pcap_t for compiling filters or opening a capture for output
pcap_setfilter(3)
set the filter
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
PCI bus interface
pci_iov_schema(9), pci_iov_schema_alloc_node(9), pci_iov_schema_add_bool(9), pci_iov_schema_add_string(9), pci_iov_schema_add_uint8(9), pci_iov_schema_add_uint16(9), pci_iov_schema_add_uint32(9), pci_iov_schema_add_uint64(9), pci_iov_schema_add_unicast_mac(9)
PCI SR-IOV config schema interface
pf(4)
packet filter
pf.conf(5)
packet filter configuration file
pfctl(8)
control the packet filter (PF) device
pfil(9), pfil_head_register(9), pfil_head_unregister(9), pfil_head_get(9), pfil_add_hook(9), pfil_add_hook_flags(9), pfil_remove_hook(9), pfil_remove_hook_flags(9), pfil_run_hooks(9), pfil_rlock(9), pfil_runlock(9), pfil_wlock(9), pfil_wunlock(9)
packet filter interface
pflog(4)
packet filter logging interface
pflogd(8)
packet filter logging daemon
pfsync(4)
packet filter state table sychronisation interface
pipe(2), pipe2(2)
create descriptor pair for interprocess communication
pmap_enter(9)
insert a virtual page into a physical map
pmap_is_prefaultable(9)
determine if a page may be prefaulted
pmap_mincore(9)
determine if a virtual address is resident in physical memory
pmap_page_exists_quick(9)
determine if a page exists in a physical map
pmap_qenter(9), pmap_qremove(9)
manage temporary kernel space mappings
pmap_quick_enter_page(9), pmap_quick_remove_page(9)
manage fast, single-page kernel address space mappings
pmc(3)
library for accessing hardware performance monitoring counters
pmc.iaf(3)
measurement events for Intel fixed function performance counters
pmc.tsc(3)
measurements using the i386 timestamp counter
pmc.ucf(3)
measurement events for Intel uncore fixed function performance counters
pmc_allocate(3), pmc_release(3)
allocate and free performance monitoring counters
pmc_capabilities(3), pmc_cpuinfo(3), pmc_ncpu(3), pmc_npmc(3), pmc_pmcinfo(3), pmc_width(3)
retrieve information about performance monitoring counters
pmc_disable(3), pmc_enable(3)
administrative control of hardware performance counters
pmc_read(3), pmc_rw(3), pmc_write(3)
read and write hardware performance counters
pmccontrol(8)
control hardware performance monitoring counters
posix_openpt(2)
open a pseudo-terminal device
ppi(4)
user-space interface to ppbus parallel 'geek' port
printcap(5)
printer capability data base
prison_check(9)
determine if two credentials belong to the same jail
procstat_close(3), procstat_freeargv(3), procstat_freeauxv(3), procstat_freeenvv(3), procstat_freefiles(3), procstat_freegroups(3), procstat_freekstack(3), procstat_freeprocs(3), procstat_freeptlwpinfo(3), procstat_freevmmap(3), procstat_get_pipe_info(3), procstat_get_pts_info(3), procstat_get_sem_info(3), procstat_get_shm_info(3), procstat_get_socket_info(3), procstat_get_vnode_info(3), procstat_getargv(3), procstat_getauxv(3), procstat_getenvv(3), procstat_getfiles(3), procstat_getgroups(3), procstat_getkstack(3), procstat_getosrel(3), procstat_getpathname(3), procstat_getprocs(3), procstat_getptlwpinfo(3), procstat_getrlimit(3), procstat_getumask(3), procstat_getvmmap(3), procstat_open_core(3), procstat_open_kvm(3), procstat_open_sysctl(3)
library interface for file and process information retrieval
prometheus_sysctl_exporter(8)
print kernel state as Prometheus metrics
pthread_atfork(3)
register fork handlers
pthread_exit(3)
terminate the calling thread
pthread_join(3), pthread_timedjoin_np(3)
wait for thread termination
pthread_rwlock_timedrdlock(3)
acquire a read-write lock for reading or give up after a specified period
pthread_rwlock_timedwrlock(3)
acquire a read-write lock for writing or give up after a specified period
pthread_setschedparam(3), pthread_getschedparam(3)
thread scheduling parameter manipulation
pts(4)
pseudo-terminal driver
pty(4)
BSD-style and System V-style compatibility pseudo-terminal driver
pwait(1)
wait for processes to terminate
qlnxe(4)
Cavium 25/40/100 Gigabit Ethernet & CNA Adapter Driver
qlxgb(4)
QLogic 10 Gigabit Ethernet & CNA Adapter Driver
qlxgbe(4)
QLogic 10 Gigabit Ethernet & CNA Adapter Driver
qlxge(4)
QLogic 8100 Series 10 Gigabit Ethernet Adapter Driver
random(3), srandom(3), srandomdev(3), initstate(3), setstate(3)
better random number generator; routines for changing generators
rcorder(8)
print a dependency ordering of interdependent files
rdma_dereg_mr(3)
deregisters a registered memory region
rdma_reg_msgs(3)
register data buffer(s) for sending or receiving messages
rdma_reg_read(3)
register data buffer(s) for remote RDMA read access
rdma_reg_write(3)
register data buffer(s) for remote RDMA write access
re(4)
RealTek 8139C+/8169/816xS/811xS/8168/810xE/8111 PCI/PCIe Ethernet adapter driver
refcount(9), refcount_init(9), refcount_acquire(9), refcount_release(9)
manage a simple reference counter
renice(8)
alter priority of running processes
resettodr(9)
set battery-backed clock from system time
resizewin(1)
update terminal size
revoke(1)
revoke a character device
rmlock(9), rm_init(9), rm_init_flags(9), rm_destroy(9), rm_rlock(9), rm_try_rlock(9), rm_wlock(9), rm_runlock(9), rm_wunlock(9), rm_wowned(9), rm_sleep(9), rm_assert(9), RM_SYSINIT(9), RM_SYSINIT_FLAGS(9)
kernel reader/writer lock optimized for read-mostly access patterns
routed(8), rdisc(8)
network RIP and router discovery routing daemon
rpc_clnt_calls(3), clnt_call(3), clnt_freeres(3), clnt_geterr(3), clnt_perrno(3), clnt_perror(3), clnt_sperrno(3), clnt_sperror(3), rpc_broadcast(3), rpc_broadcast_exp(3), rpc_call(3)
library routines for client side calls
rpc_gss_set_callback(3)
Register a security context creation callback
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_reg(3), rpc_reg(3), svc_reg(3), svc_unreg(3), svc_auth_reg(3), xprt_register(3), xprt_unregister(3)
library routines for registering servers
rpmatch(3)
determine whether the response to a question is affirmative or negative
rrenumd(8)
router renumbering daemon
rrenumd.conf(5)
configuration file for router renumbering daemon
rtadvd(8)
router advertisement daemon
rtadvd.conf(5)
config file for router advertisement daemon
rtsold(8), rtsol(8)
router solicitation daemon
rwlock(9), rw_init(9), rw_init_flags(9), rw_destroy(9), rw_rlock(9), rw_wlock(9), rw_runlock(9), rw_wunlock(9), rw_unlock(9), rw_try_rlock(9), rw_try_upgrade(9), rw_try_wlock(9), rw_downgrade(9), rw_sleep(9), rw_initialized(9), rw_wowned(9), rw_assert(9), RW_SYSINIT(9), RW_SYSINIT_FLAGS(9)
kernel reader/writer lock
sched_get_priority_max(2), sched_get_priority_min(2), sched_rr_get_interval(2)
get scheduling parameter limits
sched_setparam(2), sched_getparam(2)
set/get scheduling parameters
sched_setscheduler(2), sched_getscheduler(2)
set/get scheduling policy and scheduler parameters
screen(4)
pc display interface
script(1)
make typescript of terminal session
sctp(4)
Internet Stream Control Transmission Protocol
setfib(1)
execute a utility with an altered default network view
sf(4)
Adaptec AIC-6915 Starfire PCI Fast Ethernet adapter driver
sfxge(4)
Solarflare 10Gb Ethernet adapter driver
sglist(9), sglist_alloc(9), sglist_append(9), sglist_append_bio(9), sglist_append_mbuf(9), sglist_append_phys(9), sglist_append_sglist(9), sglist_append_uio(9), sglist_append_user(9), sglist_append_vmpages(9), sglist_build(9), sglist_clone(9), sglist_consume_uio(9), sglist_count(9), sglist_count_vmpages(9), sglist_free(9), sglist_hold(9), sglist_init(9), sglist_join(9), sglist_length(9), sglist_reset(9), sglist_slice(9), sglist_split(9)
manage a scatter/gather list of physical memory addresses
sh(1)
command interpreter (shell)
sighold(2), sigignore(2), sigpause(2), sigrelse(2), sigset(2)
legacy interface for signal management
siginterrupt(3)
allow signals to interrupt system calls
signbit(3)
determine whether a floating-point number's sign is negative
sigsuspend(2)
atomically release blocked signals and wait for interrupt
sio(4)
fast interrupt driven asynchronous serial communications interface
sk(4)
SysKonnect SK-984x and SK-982x PCI Gigabit Ethernet adapter driver
sleep(1)
suspend execution for an interval of time
sleep(3)
suspend thread execution for an interval measured in seconds
smbutil(1)
interface to the SMB requester
snd_emu10k1(4)
SoundBlaster Live! and Audigy PCI bridge device driver
snd_emu10kx(4)
Creative SoundBlaster Live! and Audigy sound cards device driver
snd_sbc(4), snd_sb16(4), snd_sb8(4)
Creative Sound Blaster ISA and compatible bridge device driver
snmp_mibII(3), mibII(3), mibif_notify_f(3), mib_netsock(3), mib_if_set_dyn(3), mib_refresh_iflist(3), mib_find_if(3), mib_find_if_sys(3), mib_find_if_name(3), mib_first_if(3), mib_next_if(3), mib_register_newif(3), mib_unregister_newif(3), mib_fetch_ifmib(3), mib_if_admin(3), mib_find_ifa(3), mib_first_ififa(3), mib_next_ififa(3), mib_ifstack_create(3), mib_ifstack_delete(3), mib_find_rcvaddr(3), mib_rcvaddr_create(3), mib_rcvaddr_delete(3), mibif_notify(3), mibif_unnotify(3)
mib-2 module for bsnmpd
snmp_netgraph(3), snmp_node(3), snmp_nodename(3), ng_cookie_f(3), ng_hook_f(3), ng_register_cookie(3), ng_unregister_cookie(3), ng_register_hook(3), ng_unregister_hook(3), ng_unregister_module(3), ng_output(3), ng_output_node(3), ng_output_id(3), ng_dialog(3), ng_dialog_node(3), ng_dialog_id(3), ng_send_data(3), ng_mkpeer_id(3), ng_connect_node(3), ng_connect_id(3), ng_connect2_id(3), ng_connect2_tee_id(3), ng_rmhook(3), ng_rmhook_id(3), ng_rmhook_tee_id(3), ng_shutdown_id(3), ng_next_node_id(3), ng_node_id(3), ng_node_id_node(3), ng_node_name(3), ng_node_type(3), ng_peer_hook_id(3)
netgraph module for snmpd
snp(4)
tty snoop interface
sockatmark(3)
determine whether the read pointer is at the OOB mark
socket(9)
kernel socket interface
soelim(1)
interpret.so requests in manpages
sourcefilter(3)
advanced multicast group membership API
splash(4)
splash screen / screen saver interface
spppcontrol(8)
display or set parameters for an sppp interface
stf(4)
6to4 tunnel interface
stge(4)
Sundance/Tamarack TC9021 Gigabit Ethernet adapter driver
strchr(3), strrchr(3), strchrnul(3)
locate character in string
strings(1)
print the strings of printable characters in files
strpbrk(3)
locate multiple characters in string
stty(1)
set the options for a terminal device interface
swapon(2), swapoff(2)
control devices for interleaved paging/swapping
swi_add(9), swi_remove(9), swi_sched(9)
register and schedule software interrupt handlers
sym(4)
NCR/Symbios/LSI Logic 53C8XX PCI SCSI host adapter driver
syscall_helper_register(9), syscall_helper_unregister(9)
kernel syscall registration routines
sysdecode_kevent(3), sysdecode_kevent_fflags(3), sysdecode_kevent_filter(3), sysdecode_kevent_flags(3)
output description of kevent structure fields
tabs(1)
set terminal tabs
tap(4)
Ethernet tunnel software network interface
tcgetsid(3)
get session ID associated with a controlling terminal
tcp(4)
Internet Transmission Control Protocol
tcp_functions(9)
Alternate TCP Stack Framework
tcpd(8)
access control facility for internet services
tcsetsid(3)
set session ID associated with a controlling terminal
telnet(1)
user interface to the TELNET protocol
terasic_mtl(4)
driver for the Terasic/Cambridge Multi-Touch LCD device
term(5)
format of compiled term file
term(7)
conventions for naming terminal types
term_variables(3), SP(3), acs_map(3), boolcodes(3), boolfnames(3), boolnames(3), cur_term(3), numcodes(3), numfnames(3), numnames(3), strcodes(3), strfnames(3), strnames(3), ttytype(3)
curses terminfo global variables
termcap(5)
terminal capability data base
terminfo(5)
terminal capability data base
termios(4)
general terminal line discipline
tftp-proxy(8)
Internet Trivial File Transfer Protocol proxy
tftpd(8)
Internet Trivial File Transfer Protocol server
thr_exit(2)
terminate current thread
timecounters(4)
kernel time counters subsystem
tolower(3)
upper case to lower case letter conversion
toupper(3)
lower case to upper case letter conversion
towctrans(3), wctrans(3)
wide character mapping functions
towlower(3)
upper case to lower case letter conversion (wide character version)
towupper(3)
lower case to upper case letter conversion (wide character version)
tput(1), clear(1)
terminal capability interface
tr(1)
translate characters
trm(4)
Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver
trpt(8)
transliterate protocol trace
tset(1), reset(1)
terminal initialization
tty(1)
return user's terminal name
tty(4)
general terminal interface
ttyname(3), ttyname_r(3), isatty(3)
get name of associated terminal (tty) from file descriptor
ttys(5)
terminal initialization information
tun(4)
tunnel software network interface
tvtohz(9)
convert time interval to tick count
twe(4)
3ware 5000/6000/7000/8000 series PATA/SATA RAID adapter driver
txp(4)
3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface
ualarm(3)
schedule signal after specified time
uark(4)
Arkmicro Technologies ARK3116 based USB serial adapter
uart(4)
driver for Universal Asynchronous Receiver/Transmitter (UART) devices
ubsa(4)
USB support for Belkin serial adapters
ubser(4)
USB support for BWCT console serial adapters
uchcom(4)
WinChipHead CH341/CH340 serial adapter driver
udp(4)
Internet User Datagram Protocol
uftdi(4)
USB support for serial adapters based on the FTDI family of USB serial adapter chips
ugold(4)
TEMPer gold HID thermometer
ulpt(4)
USB printer support
umcs(4)
USB support for serial adapters based on the MCS7820 and MCS7840 chips
umct(4)
Magic Control Technology USB-RS232 converter driver
umoscom(4)
USB support for serial adapters based on chips made by MOSCHIP
ungetc(3)
un-get character from input stream
ungetwc(3)
un-get wide character from input stream
uniq(1)
report or filter out repeated lines in a file
unvis(3), strunvis(3), strnunvis(3), strunvisx(3), strnunvisx(3)
decode a visual representation of characters
upgt(4)
Conexant/Intersil PrismGT SoftMAC USB IEEE 802.11b/g wireless network device
uplcom(4)
USB support for Prolific PL-2303/2303X/2303HX serial adapters driver
usb_fifo_alloc_buffer(9), usb_fifo_attach(9), usb_fifo_detach(9), usb_fifo_free_buffer(9), usb_fifo_get_data(9), usb_fifo_get_data_buffer(9), usb_fifo_get_data_error(9), usb_fifo_get_data_linear(9), usb_fifo_put_bytes_max(9), usb_fifo_put_data(9), usb_fifo_put_data_buffer(9), usb_fifo_put_data_error(9), usb_fifo_put_data_linear(9), usb_fifo_reset(9), usb_fifo_softc(9), usb_fifo_wakeup(9), usbd_do_request(9), usbd_do_request_flags(9), usbd_errstr(9), usbd_lookup_id_by_info(9), usbd_lookup_id_by_uaa(9), usbd_transfer_clear_stall(9), usbd_transfer_drain(9), usbd_transfer_pending(9), usbd_transfer_poll(9), usbd_transfer_setup(9), usbd_transfer_start(9), usbd_transfer_stop(9), usbd_transfer_submit(9), usbd_transfer_unsetup(9), usbd_xfer_clr_flag(9), usbd_xfer_frame_data(9), usbd_xfer_frame_len(9), usbd_xfer_get_frame(9), usbd_xfer_get_priv(9), usbd_xfer_is_stalled(9), usbd_xfer_max_framelen(9), usbd_xfer_max_frames(9), usbd_xfer_max_len(9), usbd_xfer_set_flag(9), usbd_xfer_set_frame_data(9), usbd_xfer_set_frame_len(9), usbd_xfer_set_frame_offset(9), usbd_xfer_set_frames(9), usbd_xfer_set_interval(9), usbd_xfer_set_priv(9), usbd_xfer_set_stall(9), usbd_xfer_set_timeout(9), usbd_xfer_softc(9), usbd_xfer_state(9), usbd_xfer_status(9)
Universal Serial Bus driver programming interface
use_default_colors(3), assume_default_colors(3)
use terminal's default colors
use_legacy_coding(3)
use terminal's default colors
uslcom(4)
Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105 based USB serial adapter
usleep(3)
suspend process execution for an interval measured in microseconds
utempter_add_record(3), utempter_remove_added_record(3), utempter_remove_record(3), addToUtmp(3), removeFromUtmp(3), removeLineFromUtmp(3)
utempter compatibility interface
uvscom(4)
USB support for SUNTAC Slipper U VS-10U serial adapters driver
vaccess(9)
generate an access control decision using vnode parameters
vaccess_acl_nfs4(9)
generate a NFSv4 ACL access control decision using vnode parameters
vaccess_acl_posix1e(9)
generate a POSIX.1e ACL access control decision using vnode parameters
vfs_getopt(9), vfs_getopts(9), vfs_flagopt(9), vfs_scanopt(9), vfs_copyopt(9), vfs_filteropt(9), vfs_setopt(9), vfs_setopt_part(9), vfs_setopts(9)
manipulate mount options and their values
vga(4)
generic video card interface
vge(4)
VIA Networking Technologies Velocity Gigabit Ethernet adapter driver
vis(1)
display non-printable characters in a visual format
vis(3), nvis(3), strvis(3), stravis(3), strnvis(3), strvisx(3), strnvisx(3), strenvisx(3), svis(3), snvis(3), strsvis(3), strsnvis(3), strsvisx(3), strsnvisx(3), strsenvisx(3)
visually encode characters
vkbd(4)
the virtual AT keyboard interface
vlan(4)
IEEE 802.1Q VLAN network interface
vm_fault_prefault(9)
cluster page faults into a process's address space
vmx(4)
VMware VMXNET3 Virtual Interface Controller device
vnode(9)
internal representation of a file or directory
vpo(4)
parallel to SCSI interface driver
vt(4)
virtual terminal console driver
vxlan(4)
Virtual eXtensible LAN interface
wc(1)
word, line, character, and byte count
wcrtomb(3), c16rtomb(3), c32rtomb(3)
convert a wide-character code to a character (restartable)
wcsftime(3)
convert date and time to a wide-character string
wcsrtombs(3), wcsnrtombs(3)
convert a wide-character string to a character string (restartable)
wcstok(3)
split wide-character string into tokens
wcstol(3), wcstoul(3), wcstoll(3), wcstoull(3), wcstoimax(3), wcstoumax(3)
convert a wide character string value to a long, unsigned long, long long, unsigned long long, intmax_t or uintmax_t integer
wcstombs(3)
convert a wide-character string to a character string
wcswidth(3)
number of column positions in wide-character string
wctomb(3)
convert a wide-character code to a character
wcwidth(3)
number of column positions of a wide-character code
whois(1)
Internet domain name and network number directory service
wi(4)
Lucent Hermes, and Intersil PRISM IEEE 802.11 driver
wire-test(8)
test your network interfaces and local IP address
wlan_xauth(4)
External authenticator support for 802.11 devices
wmemchr(3), wmemcmp(3), wmemcpy(3), wmemmove(3), wmemset(3), wcpcpy(3), wcpncpy(3), wcscasecmp(3), wcscat(3), wcschr(3), wcscmp(3), wcscpy(3), wcscspn(3), wcsdup(3), wcslcat(3), wcslcpy(3), wcslen(3), wcsncasecmp(3), wcsncat(3), wcsncmp(3), wcsncpy(3), wcsnlen(3), wcspbrk(3), wcsrchr(3), wcsspn(3), wcsstr(3)
wide character string manipulation operations
wpa_cli(8)
text-based frontend program for interacting with wpa_supplicant
wprintf(3), fwprintf(3), swprintf(3), vwprintf(3), vfwprintf(3), vswprintf(3)
formatted wide character output conversion
wscanf(3), fwscanf(3), swscanf(3), vwscanf(3), vswscanf(3), vfwscanf(3)
wide character input format conversion
xdr(3), xdr_array(3), xdr_bool(3), xdr_bytes(3), xdr_char(3), xdr_destroy(3), xdr_double(3), xdr_enum(3), xdr_float(3), xdr_free(3), xdr_getpos(3), xdr_hyper(3), xdr_inline(3), xdr_int(3), xdr_long(3), xdr_longlong_t(3), xdrmem_create(3), xdr_opaque(3), xdr_pointer(3), xdrrec_create(3), xdrrec_endofrecord(3), xdrrec_eof(3), xdrrec_skiprecord(3), xdr_reference(3), xdr_setpos(3), xdr_short(3), xdr_sizeof(3), xdrstdio_create(3), xdr_string(3), xdr_u_char(3), xdr_u_hyper(3), xdr_u_int(3), xdr_u_long(3), xdr_u_longlong_t(3), xdr_u_short(3), xdr_union(3), xdr_vector(3), xdr_void(3), xdr_wrapstring(3)
library routines for external data representation
xo_set_syslog_enterprise_id(3)
Set the enterprise identifier for syslog content
xo_set_writer(3)
set custom writer functions for a libxo handle
xpt(4)
CAM transport layer interface
ypwhich(1)
return hostname of NIS server of map master
zfsboot(8)
bootcode for ZFS on BIOS-based computers
zstreamdump(1)
filter data in zfs send stream
BIO_f_base64(3)
base64 BIO filter
BIO_f_cipher(3), BIO_set_cipher(3), BIO_get_cipher_status(3), BIO_get_cipher_ctx(3)
cipher BIO filter
BIO_f_md(3), BIO_set_md(3), BIO_get_md(3), BIO_get_md_ctx(3)
message digest BIO filter
BIO_f_null(3)
null filter
BIO_new_CMS(3)
CMS streaming filter BIO
BUF_MEM_new(3), BUF_MEM_new_ex(3), BUF_MEM_free(3), BUF_MEM_grow(3), BUF_MEM_grow_clean(3), BUF_reverse(3)
simple character array structure
CA.pl(1)
friendlier interface for OpenSSL certificate programs
DECLARE_ASN1_FUNCTIONS(3), IMPLEMENT_ASN1_FUNCTIONS(3), ASN1_ITEM(3), ACCESS_DESCRIPTION_free(3), ACCESS_DESCRIPTION_new(3), ADMISSIONS_free(3), ADMISSIONS_new(3), ADMISSION_SYNTAX_free(3), ADMISSION_SYNTAX_new(3), ASIdOrRange_free(3), ASIdOrRange_new(3), ASIdentifierChoice_free(3), ASIdentifierChoice_new(3), ASIdentifiers_free(3), ASIdentifiers_new(3), ASRange_free(3), ASRange_new(3), AUTHORITY_INFO_ACCESS_free(3), AUTHORITY_INFO_ACCESS_new(3), AUTHORITY_KEYID_free(3), AUTHORITY_KEYID_new(3), BASIC_CONSTRAINTS_free(3), BASIC_CONSTRAINTS_new(3), CERTIFICATEPOLICIES_free(3), CERTIFICATEPOLICIES_new(3), CMS_ContentInfo_free(3), CMS_ContentInfo_new(3), CMS_ContentInfo_print_ctx(3), CMS_ReceiptRequest_free(3), CMS_ReceiptRequest_new(3), CRL_DIST_POINTS_free(3), CRL_DIST_POINTS_new(3), DIRECTORYSTRING_free(3), DIRECTORYSTRING_new(3), DISPLAYTEXT_free(3), DISPLAYTEXT_new(3), DIST_POINT_NAME_free(3), DIST_POINT_NAME_new(3), DIST_POINT_free(3), DIST_POINT_new(3), DSAparams_dup(3), ECPARAMETERS_free(3), ECPARAMETERS_new(3), ECPKPARAMETERS_free(3), ECPKPARAMETERS_new(3), EDIPARTYNAME_free(3), EDIPARTYNAME_new(3), ESS_CERT_ID_dup(3), ESS_CERT_ID_free(3), ESS_CERT_ID_new(3), ESS_ISSUER_SERIAL_dup(3), ESS_ISSUER_SERIAL_free(3), ESS_ISSUER_SERIAL_new(3), ESS_SIGNING_CERT_dup(3), ESS_SIGNING_CERT_free(3), ESS_SIGNING_CERT_new(3), EXTENDED_KEY_USAGE_free(3), EXTENDED_KEY_USAGE_new(3), GENERAL_NAMES_free(3), GENERAL_NAMES_new(3), GENERAL_NAME_dup(3), GENERAL_NAME_free(3), GENERAL_NAME_new(3), GENERAL_SUBTREE_free(3), GENERAL_SUBTREE_new(3), IPAddressChoice_free(3), IPAddressChoice_new(3), IPAddressFamily_free(3), IPAddressFamily_new(3), IPAddressOrRange_free(3), IPAddressOrRange_new(3), IPAddressRange_free(3), IPAddressRange_new(3), ISSUING_DIST_POINT_free(3), ISSUING_DIST_POINT_new(3), NAME_CONSTRAINTS_free(3), NAME_CONSTRAINTS_new(3), NAMING_AUTHORITY_free(3), NAMING_AUTHORITY_new(3), NETSCAPE_CERT_SEQUENCE_free(3), NETSCAPE_CERT_SEQUENCE_new(3), NETSCAPE_SPKAC_free(3), NETSCAPE_SPKAC_new(3), NETSCAPE_SPKI_free(3), NETSCAPE_SPKI_new(3), NOTICEREF_free(3), NOTICEREF_new(3), OCSP_BASICRESP_free(3), OCSP_BASICRESP_new(3), OCSP_CERTID_dup(3), OCSP_CERTID_new(3), OCSP_CERTSTATUS_free(3), OCSP_CERTSTATUS_new(3), OCSP_CRLID_free(3), OCSP_CRLID_new(3), OCSP_ONEREQ_free(3), OCSP_ONEREQ_new(3), OCSP_REQINFO_free(3), OCSP_REQINFO_new(3), OCSP_RESPBYTES_free(3), OCSP_RESPBYTES_new(3), OCSP_RESPDATA_free(3), OCSP_RESPDATA_new(3), OCSP_RESPID_free(3), OCSP_RESPID_new(3), OCSP_RESPONSE_new(3), OCSP_REVOKEDINFO_free(3), OCSP_REVOKEDINFO_new(3), OCSP_SERVICELOC_free(3), OCSP_SERVICELOC_new(3), OCSP_SIGNATURE_free(3), OCSP_SIGNATURE_new(3), OCSP_SINGLERESP_free(3), OCSP_SINGLERESP_new(3), OTHERNAME_free(3), OTHERNAME_new(3), PBE2PARAM_free(3), PBE2PARAM_new(3), PBEPARAM_free(3), PBEPARAM_new(3), PBKDF2PARAM_free(3), PBKDF2PARAM_new(3), PKCS12_BAGS_free(3), PKCS12_BAGS_new(3), PKCS12_MAC_DATA_free(3), PKCS12_MAC_DATA_new(3), PKCS12_SAFEBAG_free(3), PKCS12_SAFEBAG_new(3), PKCS12_free(3), PKCS12_new(3), PKCS7_DIGEST_free(3), PKCS7_DIGEST_new(3), PKCS7_ENCRYPT_free(3), PKCS7_ENCRYPT_new(3), PKCS7_ENC_CONTENT_free(3), PKCS7_ENC_CONTENT_new(3), PKCS7_ENVELOPE_free(3), PKCS7_ENVELOPE_new(3), PKCS7_ISSUER_AND_SERIAL_free(3), PKCS7_ISSUER_AND_SERIAL_new(3), PKCS7_RECIP_INFO_free(3), PKCS7_RECIP_INFO_new(3), PKCS7_SIGNED_free(3), PKCS7_SIGNED_new(3), PKCS7_SIGNER_INFO_free(3), PKCS7_SIGNER_INFO_new(3), PKCS7_SIGN_ENVELOPE_free(3), PKCS7_SIGN_ENVELOPE_new(3), PKCS7_dup(3), PKCS7_free(3), PKCS7_new(3), PKCS7_print_ctx(3), PKCS8_PRIV_KEY_INFO_free(3), PKCS8_PRIV_KEY_INFO_new(3), PKEY_USAGE_PERIOD_free(3), PKEY_USAGE_PERIOD_new(3), POLICYINFO_free(3), POLICYINFO_new(3), POLICYQUALINFO_free(3), POLICYQUALINFO_new(3), POLICY_CONSTRAINTS_free(3), POLICY_CONSTRAINTS_new(3), POLICY_MAPPING_free(3), POLICY_MAPPING_new(3), PROFESSION_INFO_free(3), PROFESSION_INFO_new(3), PROFESSION_INFOS_free(3), PROFESSION_INFOS_new(3), PROXY_CERT_INFO_EXTENSION_free(3), PROXY_CERT_INFO_EXTENSION_new(3), PROXY_POLICY_free(3), PROXY_POLICY_new(3), RSAPrivateKey_dup(3), RSAPublicKey_dup(3), RSA_OAEP_PARAMS_free(3), RSA_OAEP_PARAMS_new(3), RSA_PSS_PARAMS_free(3), RSA_PSS_PARAMS_new(3), SCRYPT_PARAMS_free(3), SCRYPT_PARAMS_new(3), SXNETID_free(3), SXNETID_new(3), SXNET_free(3), SXNET_new(3), TLS_FEATURE_free(3), TLS_FEATURE_new(3), TS_ACCURACY_dup(3), TS_ACCURACY_free(3), TS_ACCURACY_new(3), TS_MSG_IMPRINT_dup(3), TS_MSG_IMPRINT_free(3), TS_MSG_IMPRINT_new(3), TS_REQ_dup(3), TS_REQ_free(3), TS_REQ_new(3), TS_RESP_dup(3), TS_RESP_free(3), TS_RESP_new(3), TS_STATUS_INFO_dup(3), TS_STATUS_INFO_free(3), TS_STATUS_INFO_new(3), TS_TST_INFO_dup(3), TS_TST_INFO_free(3), TS_TST_INFO_new(3), USERNOTICE _free(3), USERNOTICE_new(3), X509_ALGOR_free(3), X509_ALGOR_new(3), X509_ATTRIBUTE_dup(3), X509_ATTRIBUTE_free(3), X509_ATTRIBUTE_new(3), X509_CERT_AUX_free(3), X509_CERT_AUX_new(3), X509_CINF_free(3), X509_CINF_new(3), X509_CRL_INFO_free(3), X509_CRL_INFO_new(3), X509_CRL_dup(3), X509_CRL_free(3), X509_CRL_new(3), X509_EXTENSION_dup(3), X509_EXTENSION_free(3), X509_EXTENSION_new(3), X509_NAME_ENTRY_dup(3), X509_NAME_ENTRY_free(3), X509_NAME_ENTRY_new(3), X509_NAME_dup(3), X509_NAME_free(3), X509_NAME_new(3), X509_REQ_INFO_free(3), X509_REQ_INFO_new(3), X509_REQ_dup(3), X509_REQ_free(3), X509_REQ_new(3), X509_REVOKED_dup(3), X509_REVOKED_free(3), X509_REVOKED_new(3), X509_SIG_free(3), X509_SIG_new(3), X509_VAL_free(3), X509_VAL_new(3), X509_dup(3)
ASN1 object utilities
DECLARE_PEM_rw(3), PEM_read_CMS(3), PEM_read_bio_CMS(3), PEM_write_CMS(3), PEM_write_bio_CMS(3), PEM_write_DHxparams(3), PEM_write_bio_DHxparams(3), PEM_read_ECPKParameters(3), PEM_read_bio_ECPKParameters(3), PEM_write_ECPKParameters(3), PEM_write_bio_ECPKParameters(3), PEM_read_ECPrivateKey(3), PEM_write_ECPrivateKey(3), PEM_write_bio_ECPrivateKey(3), PEM_read_EC_PUBKEY(3), PEM_read_bio_EC_PUBKEY(3), PEM_write_EC_PUBKEY(3), PEM_write_bio_EC_PUBKEY(3), PEM_read_NETSCAPE_CERT_SEQUENCE(3), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_write_NETSCAPE_CERT_SEQUENCE(3), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_read_PKCS8(3), PEM_read_bio_PKCS8(3), PEM_write_PKCS8(3), PEM_write_bio_PKCS8(3), PEM_write_PKCS8_PRIV_KEY_INFO(3), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_PKCS8_PRIV_KEY_INFO(3), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_SSL_SESSION(3), PEM_read_bio_SSL_SESSION(3), PEM_write_SSL_SESSION(3), PEM_write_bio_SSL_SESSION(3)
PEM object encoding routines
DH_generate_parameters_ex(3), DH_generate_parameters(3), DH_check(3), DH_check_params(3), DH_check_ex(3), DH_check_params_ex(3), DH_check_pub_key_ex(3)
generate and check Diffie-Hellman parameters
DH_new_by_nid(3), DH_get_nid(3)
get or find DH named parameters
DSA_generate_parameters_ex(3), DSA_generate_parameters(3)
generate DSA parameters
ECPKParameters_print(3), ECPKParameters_print_fp(3)
Functions for decoding and encoding ASN1 representations of elliptic curve entities
EC_GROUP_get_ecparameters(3), EC_GROUP_get_ecpkparameters(3), EC_GROUP_new(3), EC_GROUP_new_from_ecparameters(3), EC_GROUP_new_from_ecpkparameters(3), EC_GROUP_free(3), EC_GROUP_clear_free(3), EC_GROUP_new_curve_GFp(3), EC_GROUP_new_curve_GF2m(3), EC_GROUP_new_by_curve_name(3), EC_GROUP_set_curve(3), EC_GROUP_get_curve(3), EC_GROUP_set_curve_GFp(3), EC_GROUP_get_curve_GFp(3), EC_GROUP_set_curve_GF2m(3), EC_GROUP_get_curve_GF2m(3), EC_get_builtin_curves(3)
Functions for creating and destroying EC_GROUP objects
ENGINE_get_DH(3), ENGINE_get_DSA(3), ENGINE_by_id(3), ENGINE_get_cipher_engine(3), ENGINE_get_default_DH(3), ENGINE_get_default_DSA(3), ENGINE_get_default_RAND(3), ENGINE_get_default_RSA(3), ENGINE_get_digest_engine(3), ENGINE_get_first(3), ENGINE_get_last(3), ENGINE_get_next(3), ENGINE_get_prev(3), ENGINE_new(3), ENGINE_get_ciphers(3), ENGINE_get_ctrl_function(3), ENGINE_get_digests(3), ENGINE_get_destroy_function(3), ENGINE_get_finish_function(3), ENGINE_get_init_function(3), ENGINE_get_load_privkey_function(3), ENGINE_get_load_pubkey_function(3), ENGINE_load_private_key(3), ENGINE_load_public_key(3), ENGINE_get_RAND(3), ENGINE_get_RSA(3), ENGINE_get_id(3), ENGINE_get_name(3), ENGINE_get_cmd_defns(3), ENGINE_get_cipher(3), ENGINE_get_digest(3), ENGINE_add(3), ENGINE_cmd_is_executable(3), ENGINE_ctrl(3), ENGINE_ctrl_cmd(3), ENGINE_ctrl_cmd_string(3), ENGINE_finish(3), ENGINE_free(3), ENGINE_get_flags(3), ENGINE_init(3), ENGINE_register_DH(3), ENGINE_register_DSA(3), ENGINE_register_RAND(3), ENGINE_register_RSA(3), ENGINE_register_all_complete(3), ENGINE_register_ciphers(3), ENGINE_register_complete(3), ENGINE_register_digests(3), ENGINE_remove(3), ENGINE_set_DH(3), ENGINE_set_DSA(3), ENGINE_set_RAND(3), ENGINE_set_RSA(3), ENGINE_set_ciphers(3), ENGINE_set_cmd_defns(3), ENGINE_set_ctrl_function(3), ENGINE_set_default(3), ENGINE_set_default_DH(3), ENGINE_set_default_DSA(3), ENGINE_set_default_RAND(3), ENGINE_set_default_RSA(3), ENGINE_set_default_ciphers(3), ENGINE_set_default_digests(3), ENGINE_set_default_string(3), ENGINE_set_destroy_function(3), ENGINE_set_digests(3), ENGINE_set_finish_function(3), ENGINE_set_flags(3), ENGINE_set_id(3), ENGINE_set_init_function(3), ENGINE_set_load_privkey_function(3), ENGINE_set_load_pubkey_function(3), ENGINE_set_name(3), ENGINE_up_ref(3), ENGINE_get_table_flags(3), ENGINE_cleanup(3), ENGINE_load_builtin_engines(3), ENGINE_register_all_DH(3), ENGINE_register_all_DSA(3), ENGINE_register_all_RAND(3), ENGINE_register_all_RSA(3), ENGINE_register_all_ciphers(3), ENGINE_register_all_digests(3), ENGINE_set_table_flags(3), ENGINE_unregister_DH(3), ENGINE_unregister_DSA(3), ENGINE_unregister_RAND(3), ENGINE_unregister_RSA(3), ENGINE_unregister_ciphers(3), ENGINE_unregister_digests(3)
ENGINE cryptographic module support
EVP_PKEY_ASN1_METHOD(3), EVP_PKEY_asn1_new(3), EVP_PKEY_asn1_copy(3), EVP_PKEY_asn1_free(3), EVP_PKEY_asn1_add0(3), EVP_PKEY_asn1_add_alias(3), EVP_PKEY_asn1_set_public(3), EVP_PKEY_asn1_set_private(3), EVP_PKEY_asn1_set_param(3), EVP_PKEY_asn1_set_free(3), EVP_PKEY_asn1_set_ctrl(3), EVP_PKEY_asn1_set_item(3), EVP_PKEY_asn1_set_siginf(3), EVP_PKEY_asn1_set_check(3), EVP_PKEY_asn1_set_public_check(3), EVP_PKEY_asn1_set_param_check(3), EVP_PKEY_asn1_set_security_bits(3), EVP_PKEY_asn1_set_set_priv_key(3), EVP_PKEY_asn1_set_set_pub_key(3), EVP_PKEY_asn1_set_get_priv_key(3), EVP_PKEY_asn1_set_get_pub_key(3), EVP_PKEY_get0_asn1(3)
manipulating and registering EVP_PKEY_ASN1_METHOD structure
EVP_PKEY_copy_parameters(3), EVP_PKEY_missing_parameters(3), EVP_PKEY_cmp_parameters(3), EVP_PKEY_cmp(3)
public key parameter and comparison functions
EVP_PKEY_keygen_init(3), EVP_PKEY_keygen(3), EVP_PKEY_paramgen_init(3), EVP_PKEY_paramgen(3), EVP_PKEY_CTX_set_cb(3), EVP_PKEY_CTX_get_cb(3), EVP_PKEY_CTX_get_keygen_info(3), EVP_PKEY_CTX_set_app_data(3), EVP_PKEY_CTX_get_app_data(3), EVP_PKEY_gen_cb(3), EVP_PKEY_check(3), EVP_PKEY_public_check(3), EVP_PKEY_param_check(3)
key and parameter generation and check functions
OSSL_STORE_LOADER(3), OSSL_STORE_LOADER_CTX(3), OSSL_STORE_LOADER_new(3), OSSL_STORE_LOADER_get0_engine(3), OSSL_STORE_LOADER_get0_scheme(3), OSSL_STORE_LOADER_set_open(3), OSSL_STORE_LOADER_set_ctrl(3), OSSL_STORE_LOADER_set_expect(3), OSSL_STORE_LOADER_set_find(3), OSSL_STORE_LOADER_set_load(3), OSSL_STORE_LOADER_set_eof(3), OSSL_STORE_LOADER_set_error(3), OSSL_STORE_LOADER_set_close(3), OSSL_STORE_LOADER_free(3), OSSL_STORE_register_loader(3), OSSL_STORE_unregister_loader(3), OSSL_STORE_open_fn(3), OSSL_STORE_ctrl_fn(3), OSSL_STORE_expect_fn(3), OSSL_STORE_find_fn(3), OSSL_STORE_load_fn(3), OSSL_STORE_eof_fn(3), OSSL_STORE_error_fn(3), OSSL_STORE_close_fn(3)
Types and functions to manipulate, register and unregister STORE loaders for different URI schemes
OSSL_STORE_SEARCH(3), OSSL_STORE_SEARCH_by_name(3), OSSL_STORE_SEARCH_by_issuer_serial(3), OSSL_STORE_SEARCH_by_key_fingerprint(3), OSSL_STORE_SEARCH_by_alias(3), OSSL_STORE_SEARCH_free(3), OSSL_STORE_SEARCH_get_type(3), OSSL_STORE_SEARCH_get0_name(3), OSSL_STORE_SEARCH_get0_serial(3), OSSL_STORE_SEARCH_get0_bytes(3), OSSL_STORE_SEARCH_get0_string(3), OSSL_STORE_SEARCH_get0_digest(3)
Type and functions to create OSSL_STORE search criteria
OpenSSL_add_all_algorithms(3), OpenSSL_add_all_ciphers(3), OpenSSL_add_all_digests(3), EVP_cleanup(3)
add algorithms to internal table
PKCS5_PBKDF2_HMAC(3), PKCS5_PBKDF2_HMAC_SHA1(3)
password based derivation routines with salt and iteration count
RAND_DRBG_get0_master(3), RAND_DRBG_get0_public(3), RAND_DRBG_get0_private(3)
get access to the global RAND_DRBG instances
RAND_DRBG_reseed(3), RAND_DRBG_set_reseed_interval(3), RAND_DRBG_set_reseed_time_interval(3), RAND_DRBG_set_reseed_defaults(3)
reseed a RAND_DRBG instance
RSA_print(3), RSA_print_fp(3), DSAparams_print(3), DSAparams_print_fp(3), DSA_print(3), DSA_print_fp(3), DHparams_print(3), DHparams_print_fp(3)
print cryptographic parameters
SSL_CTX_ctrl(3), SSL_CTX_callback_ctrl(3), SSL_ctrl(3), SSL_callback_ctrl(3)
internal handling functions for SSL_CTX and SSL objects
SSL_CTX_get0_param(3), SSL_get0_param(3), SSL_CTX_set1_param(3), SSL_set1_param(3)
get and set verification parameters
SSL_CTX_get_verify_mode(3), SSL_get_verify_mode(3), SSL_CTX_get_verify_depth(3), SSL_get_verify_depth(3), SSL_get_verify_callback(3), SSL_CTX_get_verify_callback(3)
get currently set verification parameters
SSL_CTX_sess_set_new_cb(3), SSL_CTX_sess_set_remove_cb(3), SSL_CTX_sess_set_get_cb(3), SSL_CTX_sess_get_new_cb(3), SSL_CTX_sess_get_remove_cb(3), SSL_CTX_sess_get_get_cb(3)
provide callback functions for server side external session caching
SSL_CTX_sessions(3)
access internal session cache
SSL_CTX_set_keylog_callback(3), SSL_CTX_get_keylog_callback(3), SSL_CTX_keylog_cb_func(3)
logging TLS key material
SSL_SESSION_is_resumable(3)
determine whether an SSL_SESSION object can be used for resumption
SSL_export_keying_material(3), SSL_export_keying_material_early(3)
obtain keying material for application use
SSL_get_client_random(3), SSL_get_server_random(3), SSL_SESSION_get_master_key(3), SSL_SESSION_set1_master_key(3)
get internal TLS/SSL random values and get/set master key
SSL_get_ex_data_X509_STORE_CTX_idx(3), SSL_CTX_set_verify(3), SSL_set_verify(3), SSL_CTX_set_verify_depth(3), SSL_set_verify_depth(3), SSL_verify_cb(3), SSL_verify_client_post_handshake(3), SSL_set_post_handshake_auth(3), SSL_CTX_set_post_handshake_auth(3)
set peer certificate verification parameters
SSL_get_extms_support(3)
extended master secret support
SSL_library_init(3), OpenSSL_add_ssl_algorithms(3)
initialize SSL library by registering algorithms
SSL_set1_host(3), SSL_add1_host(3), SSL_set_hostflags(3), SSL_get0_peername(3)
SSL server verification parameters
UI(3), UI_new(3), UI_new_method(3), UI_free(3), UI_add_input_string(3), UI_dup_input_string(3), UI_add_verify_string(3), UI_dup_verify_string(3), UI_add_input_boolean(3), UI_dup_input_boolean(3), UI_add_info_string(3), UI_dup_info_string(3), UI_add_error_string(3), UI_dup_error_string(3), UI_construct_prompt(3), UI_add_user_data(3), UI_dup_user_data(3), UI_get0_user_data(3), UI_get0_result(3), UI_get_result_length(3), UI_process(3), UI_ctrl(3), UI_set_default_method(3), UI_get_default_method(3), UI_get_method(3), UI_set_method(3), UI_OpenSSL(3), UI_null(3)
user interface
UI_METHOD(3), UI_create_method(3), UI_destroy_method(3), UI_method_set_opener(3), UI_method_set_writer(3), UI_method_set_flusher(3), UI_method_set_reader(3), UI_method_set_closer(3), UI_method_set_data_duplicator(3), UI_method_set_prompt_constructor(3), UI_method_set_ex_data(3), UI_method_get_opener(3), UI_method_get_writer(3), UI_method_get_flusher(3), UI_method_get_reader(3), UI_method_get_closer(3), UI_method_get_data_duplicator(3), UI_method_get_data_destructor(3), UI_method_get_prompt_constructor(3), UI_method_get_ex_data(3)
user interface method creation and destruction
UI_STRING(3), UI_string_types(3), UI_get_string_type(3), UI_get_input_flags(3), UI_get0_output_string(3), UI_get0_action_string(3), UI_get0_result_string(3), UI_get_result_string_length(3), UI_get0_test_string(3), UI_get_result_minsize(3), UI_get_result_maxsize(3), UI_set_result(3), UI_set_result_ex(3)
User interface string parsing
UI_UTIL_read_pw_string(3), UI_UTIL_read_pw(3), UI_UTIL_wrap_read_pem_callback(3)
user interface utilities
X509_STORE_get0_param(3), X509_STORE_set1_param(3), X509_STORE_get0_objects(3)
X509_STORE setter and getter functions
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_set1_ip_asc(3)
X509 verification parameters
X509_get0_notBefore(3), X509_getm_notBefore(3), X509_get0_notAfter(3), X509_getm_notAfter(3), X509_set1_notBefore(3), X509_set1_notAfter(3), X509_CRL_get0_lastUpdate(3), X509_CRL_get0_nextUpdate(3), X509_CRL_set1_lastUpdate(3), X509_CRL_set1_nextUpdate(3)
get or set certificate or CRL dates
d2i_ACCESS_DESCRIPTION(3), d2i_ADMISSIONS(3), d2i_ADMISSION_SYNTAX(3), d2i_ASIdOrRange(3), d2i_ASIdentifierChoice(3), d2i_ASIdentifiers(3), d2i_ASN1_BIT_STRING(3), d2i_ASN1_BMPSTRING(3), d2i_ASN1_ENUMERATED(3), d2i_ASN1_GENERALIZEDTIME(3), d2i_ASN1_GENERALSTRING(3), d2i_ASN1_IA5STRING(3), d2i_ASN1_INTEGER(3), d2i_ASN1_NULL(3), d2i_ASN1_OBJECT(3), d2i_ASN1_OCTET_STRING(3), d2i_ASN1_PRINTABLE(3), d2i_ASN1_PRINTABLESTRING(3), d2i_ASN1_SEQUENCE_ANY(3), d2i_ASN1_SET_ANY(3), d2i_ASN1_T61STRING(3), d2i_ASN1_TIME(3), d2i_ASN1_TYPE(3), d2i_ASN1_UINTEGER(3), d2i_ASN1_UNIVERSALSTRING(3), d2i_ASN1_UTCTIME(3), d2i_ASN1_UTF8STRING(3), d2i_ASN1_VISIBLESTRING(3), d2i_ASRange(3), d2i_AUTHORITY_INFO_ACCESS(3), d2i_AUTHORITY_KEYID(3), d2i_BASIC_CONSTRAINTS(3), d2i_CERTIFICATEPOLICIES(3), d2i_CMS_ContentInfo(3), d2i_CMS_ReceiptRequest(3), d2i_CMS_bio(3), d2i_CRL_DIST_POINTS(3), d2i_DHxparams(3), d2i_DIRECTORYSTRING(3), d2i_DISPLAYTEXT(3), d2i_DIST_POINT(3), d2i_DIST_POINT_NAME(3), d2i_DSAPrivateKey(3), d2i_DSAPrivateKey_bio(3), d2i_DSAPrivateKey_fp(3), d2i_DSAPublicKey(3), d2i_DSA_PUBKEY(3), d2i_DSA_PUBKEY_bio(3), d2i_DSA_PUBKEY_fp(3), d2i_DSA_SIG(3), d2i_DSAparams(3), d2i_ECPKParameters(3), d2i_ECParameters(3), d2i_ECPrivateKey(3), d2i_ECPrivateKey_bio(3), d2i_ECPrivateKey_fp(3), d2i_EC_PUBKEY(3), d2i_EC_PUBKEY_bio(3), d2i_EC_PUBKEY_fp(3), d2i_EDIPARTYNAME(3), d2i_ESS_CERT_ID(3), d2i_ESS_ISSUER_SERIAL(3), d2i_ESS_SIGNING_CERT(3), d2i_EXTENDED_KEY_USAGE(3), d2i_GENERAL_NAME(3), d2i_GENERAL_NAMES(3), d2i_IPAddressChoice(3), d2i_IPAddressFamily(3), d2i_IPAddressOrRange(3), d2i_IPAddressRange(3), d2i_ISSUING_DIST_POINT(3), d2i_NAMING_AUTHORITY(3), d2i_NETSCAPE_CERT_SEQUENCE(3), d2i_NETSCAPE_SPKAC(3), d2i_NETSCAPE_SPKI(3), d2i_NOTICEREF(3), d2i_OCSP_BASICRESP(3), d2i_OCSP_CERTID(3), d2i_OCSP_CERTSTATUS(3), d2i_OCSP_CRLID(3), d2i_OCSP_ONEREQ(3), d2i_OCSP_REQINFO(3), d2i_OCSP_REQUEST(3), d2i_OCSP_RESPBYTES(3), d2i_OCSP_RESPDATA(3), d2i_OCSP_RESPID(3), d2i_OCSP_RESPONSE(3), d2i_OCSP_REVOKEDINFO(3), d2i_OCSP_SERVICELOC(3), d2i_OCSP_SIGNATURE(3), d2i_OCSP_SINGLERESP(3), d2i_OTHERNAME(3), d2i_PBE2PARAM(3), d2i_PBEPARAM(3), d2i_PBKDF2PARAM(3), d2i_PKCS12(3), d2i_PKCS12_BAGS(3), d2i_PKCS12_MAC_DATA(3), d2i_PKCS12_SAFEBAG(3), d2i_PKCS12_bio(3), d2i_PKCS12_fp(3), d2i_PKCS7(3), d2i_PKCS7_DIGEST(3), d2i_PKCS7_ENCRYPT(3), d2i_PKCS7_ENC_CONTENT(3), d2i_PKCS7_ENVELOPE(3), d2i_PKCS7_ISSUER_AND_SERIAL(3), d2i_PKCS7_RECIP_INFO(3), d2i_PKCS7_SIGNED(3), d2i_PKCS7_SIGNER_INFO(3), d2i_PKCS7_SIGN_ENVELOPE(3), d2i_PKCS7_bio(3), d2i_PKCS7_fp(3), d2i_PKCS8_PRIV_KEY_INFO(3), d2i_PKCS8_PRIV_KEY_INFO_bio(3), d2i_PKCS8_PRIV_KEY_INFO_fp(3), d2i_PKCS8_bio(3), d2i_PKCS8_fp(3), d2i_PKEY_USAGE_PERIOD(3), d2i_POLICYINFO(3), d2i_POLICYQUALINFO(3), d2i_PROFESSION_INFO(3), d2i_PROXY_CERT_INFO_EXTENSION(3), d2i_PROXY_POLICY(3), d2i_RSAPrivateKey(3), d2i_RSAPrivateKey_bio(3), d2i_RSAPrivateKey_fp(3), d2i_RSAPublicKey(3), d2i_RSAPublicKey_bio(3), d2i_RSAPublicKey_fp(3), d2i_RSA_OAEP_PARAMS(3), d2i_RSA_PSS_PARAMS(3), d2i_RSA_PUBKEY(3), d2i_RSA_PUBKEY_bio(3), d2i_RSA_PUBKEY_fp(3), d2i_SCRYPT_PARAMS(3), d2i_SCT_LIST(3), d2i_SXNET(3), d2i_SXNETID(3), d2i_TS_ACCURACY(3), d2i_TS_MSG_IMPRINT(3), d2i_TS_MSG_IMPRINT_bio(3), d2i_TS_MSG_IMPRINT_fp(3), d2i_TS_REQ(3), d2i_TS_REQ_bio(3), d2i_TS_REQ_fp(3), d2i_TS_RESP(3), d2i_TS_RESP_bio(3), d2i_TS_RESP_fp(3), d2i_TS_STATUS_INFO(3), d2i_TS_TST_INFO(3), d2i_TS_TST_INFO_bio(3), d2i_TS_TST_INFO_fp(3), d2i_USERNOTICE(3), d2i_X509(3), d2i_X509_ALGOR(3), d2i_X509_ALGORS(3), d2i_X509_ATTRIBUTE(3), d2i_X509_CERT_AUX(3), d2i_X509_CINF(3), d2i_X509_CRL(3), d2i_X509_CRL_INFO(3), d2i_X509_CRL_bio(3), d2i_X509_CRL_fp(3), d2i_X509_EXTENSION(3), d2i_X509_EXTENSIONS(3), d2i_X509_NAME(3), d2i_X509_NAME_ENTRY(3), d2i_X509_PUBKEY(3), d2i_X509_REQ(3), d2i_X509_REQ_INFO(3), d2i_X509_REQ_bio(3), d2i_X509_REQ_fp(3), d2i_X509_REVOKED(3), d2i_X509_SIG(3), d2i_X509_VAL(3), i2d_ACCESS_DESCRIPTION(3), i2d_ADMISSIONS(3), i2d_ADMISSION_SYNTAX(3), i2d_ASIdOrRange(3), i2d_ASIdentifierChoice(3), i2d_ASIdentifiers(3), i2d_ASN1_BIT_STRING(3), i2d_ASN1_BMPSTRING(3), i2d_ASN1_ENUMERATED(3), i2d_ASN1_GENERALIZEDTIME(3), i2d_ASN1_GENERALSTRING(3), i2d_ASN1_IA5STRING(3), i2d_ASN1_INTEGER(3), i2d_ASN1_NULL(3), i2d_ASN1_OBJECT(3), i2d_ASN1_OCTET_STRING(3), i2d_ASN1_PRINTABLE(3), i2d_ASN1_PRINTABLESTRING(3), i2d_ASN1_SEQUENCE_ANY(3), i2d_ASN1_SET_ANY(3), i2d_ASN1_T61STRING(3), i2d_ASN1_TIME(3), i2d_ASN1_TYPE(3), i2d_ASN1_UNIVERSALSTRING(3), i2d_ASN1_UTCTIME(3), i2d_ASN1_UTF8STRING(3), i2d_ASN1_VISIBLESTRING(3), i2d_ASN1_bio_stream(3), i2d_ASRange(3), i2d_AUTHORITY_INFO_ACCESS(3), i2d_AUTHORITY_KEYID(3), i2d_BASIC_CONSTRAINTS(3), i2d_CERTIFICATEPOLICIES(3), i2d_CMS_ContentInfo(3), i2d_CMS_ReceiptRequest(3), i2d_C MS_bio(3), i2d_CRL_DIST_POINTS(3), i2d_DHxparams(3), i2d_DIRECTORYSTRING(3), i2d_DISPLAYTEXT(3), i2d_DIST_POINT(3), i2d_DIST_POINT_NAME(3), i2d_DSAPrivateKey(3), i2d_DSAPrivateKey_bio(3), i2d_DSAPrivateKey_fp(3), i2d_DSAPublicKey(3), i2d_DSA_PUBKEY(3), i2d_DSA_PUBKEY_bio(3), i2d_DSA_PUBKEY_fp(3), i2d_DSA_SIG(3), i2d_DSAparams(3), i2d_ECPKParameters(3), i2d_ECParameters(3), i2d_ECPrivateKey(3), i2d_ECPrivateKey_bio(3), i2d_ECPrivateKey_fp(3), i2d_EC_PUBKEY(3), i2d_EC_PUBKEY_bio(3), i2d_EC_PUBKEY_fp(3), i2d_EDIPARTYNAME(3), i2d_ESS_CERT_ID(3), i2d_ESS_ISSUER_SERIAL(3), i2d_ESS_SIGNING_CERT(3), i2d_EXTENDED_KEY_USAGE(3), i2d_GENERAL_NAME(3), i2d_GENERAL_NAMES(3), i2d_IPAddressChoice(3), i2d_IPAddressFamily(3), i2d_IPAddressOrRange(3), i2d_IPAddressRange(3), i2d_ISSUING_DIST_POINT(3), i2d_NAMING_AUTHORITY(3), i2d_NETSCAPE_CERT_SEQUENCE(3), i2d_NETSCAPE_SPKAC(3), i2d_NETSCAPE_SPKI(3), i2d_NOTICEREF(3), i2d_OCSP_BASICRESP(3), i2d_OCSP_CERTID(3), i2d_OCSP_CERTSTATUS(3), i2d_OCSP_CRLID(3), i2d_OCSP_ONEREQ(3), i2d_OCSP_REQINFO(3), i2d_OCSP_REQUEST(3), i2d_OCSP_RESPBYTES(3), i2d_OCSP_RESPDATA(3), i2d_OCSP_RESPID(3), i2d_OCSP_RESPONSE(3), i2d_OCSP_REVOKEDINFO(3), i2d_OCSP_SERVICELOC(3), i2d_OCSP_SIGNATURE(3), i2d_OCSP_SINGLERESP(3), i2d_OTHERNAME(3), i2d_PBE2PARAM(3), i2d_PBEPARAM(3), i2d_PBKDF2PARAM(3), i2d_PKCS12(3), i2d_PKCS12_BAGS(3), i2d_PKCS12_MAC_DATA(3), i2d_PKCS12_SAFEBAG(3), i2d_PKCS12_bio(3), i2d_PKCS12_fp(3), i2d_PKCS7(3), i2d_PKCS7_DIGEST(3), i2d_PKCS7_ENCRYPT(3), i2d_PKCS7_ENC_CONTENT(3), i2d_PKCS7_ENVELOPE(3), i2d_PKCS7_ISSUER_AND_SERIAL(3), i2d_PKCS7_NDEF(3), i2d_PKCS7_RECIP_INFO(3), i2d_PKCS7_SIGNED(3), i2d_PKCS7_SIGNER_INFO(3), i2d_PKCS7_SIGN_ENVELOPE(3), i2d_PKCS7_bio(3), i2d_PKCS7_fp(3), i2d_PKCS8PrivateKeyInfo_bio(3), i2d_PKCS8PrivateKeyInfo_fp(3), i2d_PKCS8_PRIV_KEY_INFO(3), i2d_PKCS8_PRIV_KEY_INFO_bio(3), i2d_PKCS8_PRIV_KEY_INFO_fp(3), i2d_PKCS8_bio(3), i2d_PKCS8_fp(3), i2d_PKEY_USAGE_PERIOD(3), i2d_POLICYINFO(3), i2d_POLICYQUALINFO(3), i2d_PROFESSION_INFO(3), i2d_PROXY_CERT_INFO_EXTENSION(3), i2d_PROXY_POLICY(3), i2d_PublicKey(3), i2d_RSAPrivateKey(3), i2d_RSAPrivateKey_bio(3), i2d_RSAPrivateKey_fp(3), i2d_RSAPublicKey(3), i2d_RSAPublicKey_bio(3), i2d_RSAPublicKey_fp(3), i2d_RSA_OAEP_PARAMS(3), i2d_RSA_PSS_PARAMS(3), i2d_RSA_PUBKEY(3), i2d_RSA_PUBKEY_bio(3), i2d_RSA_PUBKEY_fp(3), i2d_SCRYPT_PARAMS(3), i2d_SCT_LIST(3), i2d_SXNET(3), i2d_SXNETID(3), i2d_TS_ACCURACY(3), i2d_TS_MSG_IMPRINT(3), i2d_TS_MSG_IMPRINT_bio(3), i2d_TS_MSG_IMPRINT_fp(3), i2d_TS_REQ(3), i2d_TS_REQ_bio(3), i2d_TS_REQ_fp(3), i2d_TS_RESP(3), i2d_TS_RESP_bio(3), i2d_TS_RESP_fp(3), i2d_TS_STATUS_INFO(3), i2d_TS_TST_INFO(3), i2d_TS_TST_INFO_bio(3), i2d_TS_TST_INFO_fp(3), i2d_USERNOTICE(3), i2d_X509(3), i2d_X509_ALGOR(3), i2d_X509_ALGORS(3), i2d_X509_ATTRIBUTE(3), i2d_X509_CERT_AUX(3), i2d_X509_CINF(3), i2d_X509_CRL(3), i2d_X509_CRL_INFO(3), i2d_X509_CRL_bio(3), i2d_X509_CRL_fp(3), i2d_X509_EXTENSION(3), i2d_X509_EXTENSIONS(3), i2d_X509_NAME(3), i2d_X509_NAME_ENTRY(3), i2d_X509_PUBKEY(3), i2d_X509_REQ(3), i2d_X509_REQ_INFO(3), i2d_X509_REQ_bio(3), i2d_X509_REQ_fp(3), i2d_X509_REVOKED(3), i2d_X509_SIG(3), i2d_X509_VAL(3)
convert objects from/to ASN.1/DER representation
d2i_DHparams(3), i2d_DHparams(3)
PKCS#3 DH parameter functions
openssl-dhparam(1), dhparam(1)
DH parameter manipulation and generation
openssl-dsaparam(1), dsaparam(1)
DSA parameter manipulation and generation
openssl-ecparam(1), ecparam(1)
EC parameter manipulation and generation
openssl-gendsa(1), gendsa(1)
generate a DSA private key from a set of parameters
openssl-pkeyparam(1), pkeyparam(1)
public key algorithm parameter processing tool
"glFogf(3), glFogi(3), glFogfv(3), glFogiv(3)
specify fog parameters
"glGetBooleanv(3), glGetDoublev(3), glGetFloatv(3), glGetIntegerv(3)
return the value or values of a selected parameter
"glGetLightfv(3), glGetLightiv(3)
return light source parameter values
"glGetMapdv(3), glGetMapfv(3), glGetMapiv(3)
return evaluator parameters
"glGetMaterialfv(3), glGetMaterialiv(3)
return material parameters
"glGetTexEnvfv(3), glGetTexEnviv(3)
return texture environment parameters
"glGetTexGendv(3), glGetTexGenfv(3), glGetTexGeniv(3)
return texture coordinate generation parameters
"glGetTexLevelParameterfv(3), glGetTexLevelParameteriv(3)
return texture parameter values for a specific level of detail
"glGetTexParameterfv(3), glGetTexParameteriv(3)
return texture parameter values
"glLightModelf(3), glLightModeli(3), glLightModelfv(3), glLightModeliv(3)
set the lighting model parameters
"glLightf(3), glLighti(3), glLightfv(3), glLightiv(3)
set light source parameters
"glMaterialf(3), glMateriali(3), glMaterialfv(3), glMaterialiv(3)
specify material parameters for the lighting model
"glRasterPos2d(3), glRasterPos2f(3), glRasterPos2i(3), glRasterPos2s(3), glRasterPos3d(3), glRasterPos3f(3), glRasterPos3i(3), glRasterPos3s(3), glRasterPos4d(3), glRasterPos4f(3), glRasterPos4i(3), glRasterPos4s(3), glRasterPos2dv(3), glRasterPos2fv(3), glRasterPos2iv(3), glRasterPos2sv(3), glRasterPos3dv(3), glRasterPos3fv(3), glRasterPos3iv(3), glRasterPos3sv(3), glRasterPos4dv(3), glRasterPos4fv(3), glRasterPos4iv(3), glRasterPos4sv(3)
specify the raster position for pixel operations
"glTexEnvf(3), glTexEnvi(3), glTexEnvfv(3), glTexEnviv(3)
set texture environment parameters
"glTexParameterf(3), glTexParameteri(3), glTexParameterfv(3), glTexParameteriv(3)
set texture parameters
2048(1)
play the game 2048 in your terminal
2d-rewriter(1)
a cellular automata simulator
3dsdump(1)
Displays information about the internal structure of a 3DS file
ALLEGRO_FILE_INTERFACE(3)
Allegro 5 API
ALLEGRO_FS_INTERFACE(3)
Allegro 5 API
ALLEGRO_MEMORY_INTERFACE(3)
Allegro 5 API
ALTER_AGGREGATE(7)
change the definition of an aggregate function
ALTER_COLLATION(7)
change the definition of a collation
ALTER_CONVERSION(7)
change the definition of a conversion
ALTER_DATABASE(7)
change a database
ALTER_DEFAULT_PRIVILEGES(7)
define default access privileges
ALTER_DOMAIN(7)
change the definition of a domain
ALTER_EVENT_TRIGGER(7)
change the definition of an event trigger
ALTER_EXTENSION(7)
change the definition of an extension
ALTER_FOREIGN_DATA_WRAPPER(7)
change the definition of a foreign-data wrapper
ALTER_FOREIGN_TABLE(7)
change the definition of a foreign table
ALTER_FUNCTION(7)
change the definition of a function
ALTER_GROUP(7)
change role name or membership
ALTER_INDEX(7)
change the definition of an index
ALTER_LANGUAGE(7)
change the definition of a procedural language
ALTER_LARGE_OBJECT(7)
change the definition of a large object
ALTER_MATERIALIZED_VIEW(7)
change the definition of a materialized view
ALTER_OPERATOR(7)
change the definition of an operator
ALTER_OPERATOR_CLASS(7)
change the definition of an operator class
ALTER_OPERATOR_FAMILY(7)
change the definition of an operator family
ALTER_POLICY(7)
change the definition of a row level security policy
ALTER_ROLE(7)
change a database role
ALTER_RULE(7)
change the definition of a rule
ALTER_SCHEMA(7)
change the definition of a schema
ALTER_SEQUENCE(7)
change the definition of a sequence generator
ALTER_SERVER(7)
change the definition of a foreign server
ALTER_SYSTEM(7)
change a server configuration parameter
ALTER_TABLE(7)
change the definition of a table
ALTER_TABLESPACE(7)
change the definition of a tablespace
ALTER_TEXT_SEARCH_CONFIGURATION(7)
change the definition of a text search configuration
ALTER_TEXT_SEARCH_DICTIONARY(7)
change the definition of a text search dictionary
ALTER_TEXT_SEARCH_PARSER(7)
change the definition of a text search parser
ALTER_TEXT_SEARCH_TEMPLATE(7)
change the definition of a text search template
ALTER_TRIGGER(7)
change the definition of a trigger
ALTER_TYPE(7)
change the definition of a type
ALTER_USER(7)
change a database role
ALTER_USER_MAPPING(7)
change the definition of a user mapping
ALTER_VIEW(7)
change the definition of a view
ALTQ(4)
alternate queuing of network packets
ALTQ(9)
kernel interfaces for manipulating output queues on network interfaces
AMC-annotate(1)
completed answer sheets annotation after marking for AMC multiple choice exams
AMC-note(1)
computes marks after scans data capture for AMC multiple choice exams
ASDatabase(1x)
defines how windows should be treated by AfterStep depending on its name
ASDatabaseEntry(1x)
to be used in entry of AfterStep database
AfterStep(1x)
X11 window manager
Align(1x)
Afterstep Align
Animate(1)
the AfterStep Animate module
Animate(1x)
AfterStep module animating windows being iconified/deiconified
AppleVolumes.default(5), AppleVolumes.system(5), AppleVolumes(5)
Configuration file used by afpd(8) to determine the shares made available through AFP and specify file name extension mappings
Arrange(1x)
AfterStep module for arranging windows in a tiling or cascading order
Ast_helper.Pat(3o)
Patterns
Ast_mapper(3o)
The interface of a -ppx rewriter
Audio(1)
the AfterStep Audio module
Auto(1)
the AfterStep auto-raise module
AutoExec(1x)
functions to be executed by AfterStep on startup/shutdown
BIO_f_base64(3)
base64 BIO filter
BIO_f_cipher(3), BIO_set_cipher(3), BIO_get_cipher_status(3), BIO_get_cipher_ctx(3)
cipher BIO filter
BIO_f_md(3), BIO_set_md(3), BIO_get_md(3), BIO_get_md_ctx(3)
message digest BIO filter
BIO_f_null(3)
null filter
BIO_new_CMS(3)
CMS streaming filter BIO
BSctx_set_guess(3)
Set whether to use zero as the initial vector for the iterative method or use the values given in the vector passed to the iterative method
BSctx_set_max_it(3)
Set the maximum number of iterations to be allowed by the iterative solver
BSctx_set_method(3)
Set the iterative method to be used
BSctx_set_pre(3)
The preconditioner to be used by the iterative solver
BSctx_set_tol(3)
Set the relative residual tolerance for the iterative method
BSfree_comm(3)
Free the compiled communication pattern
BUF_MEM_new(3), BUF_MEM_new_ex(3), BUF_MEM_free(3), BUF_MEM_grow BUF_MEM_grow_clean(3), BUF_reverse(3)
simple character array structure standard C library equivalents
BUF_MEM_new(3), BUF_MEM_new_ex(3), BUF_MEM_free(3), BUF_MEM_grow(3)
simple character array structure BUF_strdup, BUF_strndup, BUF_memdup, BUF_strlcpy, BUF_strlcat - standard C library equivalents
BUS_BIND_INTR(9), bus_bind_intr(9)
bind an interrupt resource to a specific CPU
BUS_CONFIG_INTR(9)
configure interrupt polarity and trigger mode
BUS_DESCRIBE_INTR(9), bus_describe_intr(9)
associate a description with an active interrupt handler
BUS_SETUP_INTR(9), bus_setup_intr(9), BUS_TEARDOWN_INTR(9), bus_teardown_intr(9)
create, attach and teardown an interrupt handler
BalloonContents(1x)
Afterstep BalloonContents
Banner(1)
the Banner for Afterstep
Base(1x)
essential AfterStep configuration options
Bevel(1x)
Afterstep Bevel
CA.pl(1)
friendlier interface for OpenSSL certificate programs
CK_ARRAY_FOREACH(3)
iterate through an array
CK_RWCOHORT_INIT(3)
initialize instance of a cohort-based reader-writer lock type
CK_RWCOHORT_INSTANCE(3)
declare an instance of a cohort-based reader-writer lock type
CK_RWCOHORT_PROTOTYPE(3)
define reader-writer cohort-based lock using the specified cohort type
CK_RWCOHORT_READ_LOCK(3)
acquire read-only permission for cohort-based reader-writer lock
CK_RWCOHORT_READ_UNLOCK(3)
relinquish read-only access to cohort-based reader-writer lock
CK_RWCOHORT_WRITE_LOCK(3)
acquite write access for a cohort-based reader-writer lock
CK_RWCOHORT_WRITE_UNLOCK(3)
relinquish write access for cohort-based reader-writer lock
CLUSTER(7)
cluster a table according to an index
CREATE_MATERIALIZED_VIEW(7)
define a new materialized view
CURLINFO_PRIVATE(3)
get the private pointer
CURLMOPT_PUSHDATA(3)
pointer to pass to push callback
CURLMOPT_SOCKETDATA(3)
custom pointer passed to the socket callback
CURLMOPT_TIMERDATA(3)
custom pointer to pass to timer callback
CURLOPT_CHUNK_DATA(3)
custom pointer to the FTP chunk callbacks
CURLOPT_CHUNK_END_FUNCTION(3)
callback after a transfer with FTP wildcardmatch
CURLOPT_CLOSESOCKETDATA(3)
pointer passed to the socket close callback
CURLOPT_DEBUGDATA(3)
custom pointer for debug callback
CURLOPT_DNS_INTERFACE(3)
set interface to speak DNS over
CURLOPT_FNMATCH_DATA(3)
custom pointer to fnmatch callback
CURLOPT_FORBID_REUSE(3)
make connection get closed at once after use
CURLOPT_FTP_ALTERNATIVE_TO_USER(3)
command to use instead of USER with FTP
CURLOPT_FTP_SSL_CCC(3)
switch off SSL again with FTP after auth
CURLOPT_HEADERDATA(3)
pointer to pass to header callback
CURLOPT_HTTP200ALIASES(3)
specify alternative matches for HTTP 200 OK
CURLOPT_INTERFACE(3)
source interface for outgoing traffic
CURLOPT_INTERLEAVEDATA(3)
custom pointer to RTSP interleave callback
CURLOPT_INTERLEAVEFUNCTION(3)
callback function for RTSP interleaved data
CURLOPT_IOCTLDATA(3)
custom pointer passed to I/O callback
CURLOPT_NOPROGRESS(3)
switch off the progress meter
CURLOPT_OPENSOCKETDATA(3)
custom pointer passed to open socket callback
CURLOPT_POSTQUOTE(3)
(S)FTP commands to run after the transfer
CURLOPT_PRIVATE(3)
store a private pointer
CURLOPT_PROGRESSDATA(3)
custom pointer passed to the progress callback
CURLOPT_PROGRESSFUNCTION(3)
callback to progress meter function
CURLOPT_READDATA(3)
custom pointer passed to the read callback
CURLOPT_SEEKDATA(3)
custom pointer passed to the seek callback
CURLOPT_SOCKOPTDATA(3)
custom pointer to pass to sockopt callback
CURLOPT_SSH_KEYDATA(3)
pointer to pass to the SSH key callback
CURLOPT_SSL_CTX_DATA(3)
custom pointer passed to ssl_ctx callback
CURLOPT_TCP_KEEPINTVL(3)
set TCP keep-alive interval
CURLOPT_WRITEDATA(3)
custom pointer passed to the write callback
CURLOPT_XFERINFODATA(3)
custom pointer passed to the progress callback
CURLOPT_XFERINFOFUNCTION(3)
callback to progress meter function
Callback(3o)
Registering OCaml values with the C runtime
CamlinternalFormat(3o)
no description
CamlinternalFormatBasics(3o)
no description
CamlinternalLazy(3o)
Run-time support for lazy values
CamlinternalMod(3o)
Run-time support for recursive modules
CamlinternalOO(3o)
Run-time support for objects and classes
Char(3o)
Character operations
ColorScheme(1x)
defines color values for standard set of internal color names, to be used in other configuration files
DAT_ID(3)
Makes an ID value from four letters. Allegro game programming library
DECLARE_ASN1_FUNCTIONS(3), IMPLEMENT_ASN1_FUNCTIONS(3), ASN1_ITEM(3), ACCESS_DESCRIPTION_free(3), ACCESS_DESCRIPTION_new(3), ASIdOrRange_free(3), ASIdOrRange_new(3), ASIdentifierChoice_free(3), ASIdentifierChoice_new(3), ASIdentifiers_free(3), ASIdentifiers_new(3), ASRange_free(3), ASRange_new(3), AUTHORITY_INFO_ACCESS_free(3), AUTHORITY_INFO_ACCESS_new(3), AUTHORITY_KEYID_free(3), AUTHORITY_KEYID_new(3), BASIC_CONSTRAINTS_free(3), BASIC_CONSTRAINTS_new(3), CERTIFICATEPOLICIES_free(3), CERTIFICATEPOLICIES_new(3), CMS_ContentInfo_free(3), CMS_ContentInfo_new(3), CMS_ContentInfo_print_ctx(3), CMS_ReceiptRequest_free(3), CMS_ReceiptRequest_new(3), CRL_DIST_POINTS_free(3), CRL_DIST_POINTS_new(3), DIRECTORYSTRING_free(3), DIRECTORYSTRING_new(3), DISPLAYTEXT_free(3), DISPLAYTEXT_new(3), DIST_POINT_NAME_free(3), DIST_POINT_NAME_new(3), DIST_POINT_free(3), DIST_POINT_new(3), DSAparams_dup(3), ECPARAMETERS_free(3), ECPARAMETERS_new(3), ECPKPARAMETERS_free(3), ECPKPARAMETERS_new(3), EDIPARTYNAME_free(3), EDIPARTYNAME_new(3), ESS_CERT_ID_dup(3), ESS_CERT_ID_free(3), ESS_CERT_ID_new(3), ESS_ISSUER_SERIAL_dup(3), ESS_ISSUER_SERIAL_free(3), ESS_ISSUER_SERIAL_new(3), ESS_SIGNING_CERT_dup(3), ESS_SIGNING_CERT_free(3), ESS_SIGNING_CERT_new(3), EXTENDED_KEY_USAGE_free(3), EXTENDED_KEY_USAGE_new(3), GENERAL_NAMES_free(3), GENERAL_NAMES_new(3), GENERAL_NAME_dup(3), GENERAL_NAME_free(3), GENERAL_NAME_new(3), GENERAL_SUBTREE_free(3), GENERAL_SUBTREE_new(3), IPAddressChoice_free(3), IPAddressChoice_new(3), IPAddressFamily_free(3), IPAddressFamily_new(3), IPAddressOrRange_free(3), IPAddressOrRange_new(3), IPAddressRange_free(3), IPAddressRange_new(3), ISSUING_DIST_POINT_free(3), ISSUING_DIST_POINT_new(3), NAME_CONSTRAINTS_free(3), NAME_CONSTRAINTS_new(3), NETSCAPE_CERT_SEQUENCE_free(3), NETSCAPE_CERT_SEQUENCE_new(3), NETSCAPE_SPKAC_free(3), NETSCAPE_SPKAC_new(3), NETSCAPE_SPKI_free(3), NETSCAPE_SPKI_new(3), NOTICEREF_free(3), NOTICEREF_new(3), OCSP_BASICRESP_free(3), OCSP_BASICRESP_new(3), OCSP_CERTID_dup(3), OCSP_CERTID_new(3), OCSP_CERTSTATUS_free(3), OCSP_CERTSTATUS_new(3), OCSP_CRLID_free(3), OCSP_CRLID_new(3), OCSP_ONEREQ_free(3), OCSP_ONEREQ_new(3), OCSP_REQINFO_free(3), OCSP_REQINFO_new(3), OCSP_RESPBYTES_free(3), OCSP_RESPBYTES_new(3), OCSP_RESPDATA_free(3), OCSP_RESPDATA_new(3), OCSP_RESPID_free(3), OCSP_RESPID_new(3), OCSP_RESPONSE_new(3), OCSP_REVOKEDINFO_free(3), OCSP_REVOKEDINFO_new(3), OCSP_SERVICELOC_free(3), OCSP_SERVICELOC_new(3), OCSP_SIGNATURE_free(3), OCSP_SIGNATURE_new(3), OCSP_SINGLERESP_free(3), OCSP_SINGLERESP_new(3), OTHERNAME_free(3), OTHERNAME_new(3), PBE2PARAM_free(3), PBE2PARAM_new(3), PBEPARAM_free(3), PBEPARAM_new(3), PBKDF2PARAM_free(3), PBKDF2PARAM_new(3), PKCS12_BAGS_free(3), PKCS12_BAGS_new(3), PKCS12_MAC_DATA_free(3), PKCS12_MAC_DATA_new(3), PKCS12_SAFEBAG_free(3), PKCS12_SAFEBAG_new(3), PKCS12_free(3), PKCS12_new(3), PKCS7_DIGEST_free(3), PKCS7_DIGEST_new(3), PKCS7_ENCRYPT_free(3), PKCS7_ENCRYPT_new(3), PKCS7_ENC_CONTENT_free(3), PKCS7_ENC_CONTENT_new(3), PKCS7_ENVELOPE_free(3), PKCS7_ENVELOPE_new(3), PKCS7_ISSUER_AND_SERIAL_free(3), PKCS7_ISSUER_AND_SERIAL_new(3), PKCS7_RECIP_INFO_free(3), PKCS7_RECIP_INFO_new(3), PKCS7_SIGNED_free(3), PKCS7_SIGNED_new(3), PKCS7_SIGNER_INFO_free(3), PKCS7_SIGNER_INFO_new(3), PKCS7_SIGN_ENVELOPE_free(3), PKCS7_SIGN_ENVELOPE_new(3), PKCS7_dup(3), PKCS7_free(3), PKCS7_new(3), PKCS7_print_ctx(3), PKCS8_PRIV_KEY_INFO_free(3), PKCS8_PRIV_KEY_INFO_new(3), PKEY_USAGE_PERIOD_free(3), PKEY_USAGE_PERIOD_new(3), POLICYINFO_free(3), POLICYINFO_new(3), POLICYQUALINFO_free(3), POLICYQUALINFO_new(3), POLICY_CONSTRAINTS_free(3), POLICY_CONSTRAINTS_new(3), POLICY_MAPPING_free(3), POLICY_MAPPING_new(3), PROXY_CERT_INFO_EXTENSION_free(3), PROXY_CERT_INFO_EXTENSION_new(3), PROXY_POLICY_free(3), PROXY_POLICY_new(3), RSAPrivateKey_dup(3), RSAPublicKey_dup(3), RSA_OAEP_PARAMS_free(3), RSA_OAEP_PARAMS_new(3), RSA_PSS_PARAMS_free(3), RSA_PSS_PARAMS_new(3), SCT_LIST_free(3), SXNETID_free(3), SXNETID_new(3), SXNET_free(3), SXNET_new(3), TLS_FEATURE_free(3), TLS_FEATURE_new(3), TS_ACCURACY_dup(3), TS_ACCURACY_free(3), TS_ACCURACY_new(3), TS_MSG_IMPRINT_dup(3), TS_MSG_IMPRINT_free(3), TS_MSG_IMPRINT_new(3), TS_REQ_dup(3), TS_REQ_free(3), TS_REQ_new(3), TS_RESP_dup(3), TS_RESP_free(3), TS_RESP_new(3), TS_STATUS_INFO_dup(3), TS_STATUS_INFO_free(3), TS_STATUS_INFO_new(3), TS_TST_INFO_dup(3), TS_TST_INFO_free(3), TS_TST_INFO_new(3), USERNOTICE_free(3), USERNOTICE_new(3), X509_ALGOR_free(3), X509_ALGOR_new(3), X509_ATTRIBUTE_dup(3), X509_ATTRIBUTE_free(3), X509_ATTRIBUTE_new(3), X509_CERT_AUX_free(3), X509_CERT_AUX_new(3), X509_CINF_free(3), X509_CINF_new(3), X509_CRL_INFO_free(3), X509_CRL_INFO_new(3), X509_CRL_dup(3), X509_CRL_free(3), X509_CRL_new(3), X509_EXTENSION_dup(3), X509_EXTENSION_free(3), X509_EXTENSION_new(3), X509_NAME_ENTRY_dup(3), X509_NAME_ENTRY_free(3), X509_NAME_ENTRY_new(3), X509_NAME_dup(3), X509_NAME_free(3), X509_NAME_new(3), X509_REQ_INFO_free(3), X509_REQ_INFO_new(3), X509_REQ_dup(3), X509_REQ_free(3), X509_REQ_new(3), X509_REVOKED_dup(3), X509_REVOKED_free(3), X509_REVOKED_new(3), X509_SIG_free(3), X509_SIG_new(3), X509_VAL_free(3), X509_VAL_new(3), X509_dup(3)
ASN1 object utilities
DECLARE_PEM_rw(3), PEM_read_CMS(3), PEM_read_bio_CMS(3), PEM_write_CMS(3), PEM_write_bio_CMS(3), PEM_write_DHxparams(3), PEM_write_bio_DHxparams(3), PEM_read_ECPKParameters(3), PEM_read_bio_ECPKParameters(3), PEM_write_ECPKParameters(3), PEM_write_bio_ECPKParameters(3), PEM_read_ECPrivateKey(3), PEM_write_ECPrivateKey(3), PEM_write_bio_ECPrivateKey(3), PEM_read_EC_PUBKEY(3), PEM_read_bio_EC_PUBKEY(3), PEM_write_EC_PUBKEY(3), PEM_write_bio_EC_PUBKEY(3), PEM_read_NETSCAPE_CERT_SEQUENCE(3), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_write_NETSCAPE_CERT_SEQUENCE(3), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_read_PKCS8(3), PEM_read_bio_PKCS8(3), PEM_write_PKCS8(3), PEM_write_bio_PKCS8(3), PEM_write_PKCS8_PRIV_KEY_INFO(3), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_PKCS8_PRIV_KEY_INFO(3), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_SSL_SESSION(3), PEM_read_bio_SSL_SESSION(3), PEM_write_SSL_SESSION(3), PEM_write_bio_SSL_SESSION(3)
PEM object encoding routines
DELAY(9)
busy loop for an interval
DEVICE_IDENTIFY(9)
identify a device, register it
DH_generate_parameters_ex(3), DH_generate_parameters(3), DH_check(3), DH_check_params(3)
generate and check Diffie-Hellman parameters
DIALOG_PLAYER(3)
Stores GUI data internally used by Allegro
DMXGetDesktopAttributes(3)
determine global bounding box
DMXGetInputAttributes(3)
determine input device attributes
DMXGetInputCount(3)
determine number of input devices
DMXGetScreenAttributes(3)
determine back-end screen attributes
DMXGetScreenCount(3)
determine number of back-end screens
DMXGetWindowAttributes(3)
determine back-end window attributes
DMXQueryExtension(3)
determine if DMX is available
DMXQueryVersion(3)
determine DMX extension version
DOM_CharacterData(3m)
the Document Object Model (DOM) DOM_CharacterData interface
DOM_Document(3m)
the Document Object Model (DOM) DOM_Document interface
DOM_Element(3m)
the Document Object Model (DOM) DOM_Element interface
DOM_Implementation(3m)
the Document Object Model (DOM) DOM_Implementation interface
DOM_NamedNodeMap(3m)
the Document Object Model (DOM) DOM_NamedNodeMap interface
DOM_Node(3m)
the Document Object Model (DOM) DOM_Node interface
DOM_NodeList(3m)
the Document Object Model (DOM) DOM_NodeList interface
DOM_Text(3m)
the Document Object Model (DOM) DOM_Text interface
DPGEN_INV(3)
Inverter Macro-Generator
DPGEN_RF1(3), DPGEN_RF1R0(3)
Register File Macro-Generator
DPGEN_RF1D(3), DPGEN_RF1DR0(3)
Register File with Decoder Macro-Generator
DPGEN_SHIFT(3)
Shifter Macro-Generator
DPMSQueryExtension(3)
queries the X server to determine the availability of the DPMS Extension
DROP_MATERIALIZED_VIEW(7)
remove a materialized view
DS1821(3)
Programmable Digital Thermostat and Thermometer
DS1822(3)
Econo 1-Wire Digital Thermometer
DS1825(3)
Programmable Resolution 1-Wire Digital Thermometer with ID MAX31826 - Digital Temperature Sensor with 1Kb Lockable EEPROM MAX31850 MAX31851 - Cold-Junction Compensated Thermocouple
DS18B20(3)
Programmable Resolution 1-Wire Digital Thermometer MAX31820 Ambient Temperature Sensor
DS18S20(3)
High-Precision 1-Wire Digital Thermometer DS1920 - iButton version of the thermometer
DS2415(3)
/- 1-Wire Time Chip DS1904 /- RTC (real time clock) iButton DS2417 /- 1-Wire Time Chip with Interrupt
DS2423(3)
4kbit 1-Wire RAM with Counter
DS2436(3)
Battery ID/Monitor Chip
DS2437(3)
Smart Battery Monitor
DS2438(3)
Smart Battery Monitor
DS2450(3)
Quad A/D Converter
DS2740(3)
High-Precision Coulomb Counter
DS2751(3)
Multichemistry Battery Fuel Gauge
DS2755(3), DS2756(3)
Multichemistry Battery Fuel Gauge
DS2760(3), DS2761(3), DS2762(3)
High-Precision Li+ Battery Monitor
DS2770(3)
Battery Monitor and Charge Controller
DS2890(3)
1-Wire Digital Potentiometer
DS28EA00(3)
1-Wire Digital Thermometer with Sequence Detect and PIO
DSA_generate_parameters_ex(3), DSA_generate_parameters(3)
generate DSA parameters
Dpkg::Interface::Storable(3)
common methods related to object serialization
ECPKParameters_print(3), ECPKParameters_print_fp(3)
Functions for decoding and encoding ASN1 representations of elliptic curve entities
EC_GROUP_get_ecparameters(3), EC_GROUP_get_ecpkparameters(3), EC_GROUP_new(3), EC_GROUP_new_from_ecparameters(3), EC_GROUP_new_from_ecpkparameters(3), EC_GROUP_free(3), EC_GROUP_clear_free(3), EC_GROUP_new_curve_GFp(3), EC_GROUP_new_curve_GF2m(3), EC_GROUP_new_by_curve_name(3), EC_GROUP_set_curve_GFp(3), EC_GROUP_get_curve_GFp(3), EC_GROUP_set_curve_GF2m(3), EC_GROUP_get_curve_GF2m(3), EC_get_builtin_curves(3)
Functions for creating and destroying EC_GROUP objects
END_OF_MAIN(3)
Macro to put after your main() function. Allegro game programming library
ENGINE_get_DH(3), ENGINE_get_DSA(3), ENGINE_get_ECDH(3), ENGINE_get_ECDSA(3), ENGINE_by_id(3), ENGINE_get_cipher_engine(3), ENGINE_get_default_DH(3), ENGINE_get_default_DSA(3), ENGINE_get_default_ECDH(3), ENGINE_get_default_ECDSA(3), ENGINE_get_default_RAND(3), ENGINE_get_default_RSA(3), ENGINE_get_digest_engine(3), ENGINE_get_first(3), ENGINE_get_last(3), ENGINE_get_next(3), ENGINE_get_prev(3), ENGINE_new(3), ENGINE_get_ciphers(3), ENGINE_get_ctrl_function(3), ENGINE_get_digests(3), ENGINE_get_destroy_function(3), ENGINE_get_finish_function(3), ENGINE_get_init_function(3), ENGINE_get_load_privkey_function(3), ENGINE_get_load_pubkey_function(3), ENGINE_load_private_key(3), ENGINE_load_public_key(3), ENGINE_get_RAND(3), ENGINE_get_RSA(3), ENGINE_get_id(3), ENGINE_get_name(3), ENGINE_get_cmd_defns(3), ENGINE_get_cipher(3), ENGINE_get_digest(3), ENGINE_add(3), ENGINE_cmd_is_executable(3), ENGINE_ctrl(3), ENGINE_ctrl_cmd(3), ENGINE_ctrl_cmd_string(3), ENGINE_finish(3), ENGINE_free(3), ENGINE_get_flags(3), ENGINE_init(3), ENGINE_register_DH(3), ENGINE_register_DSA(3), ENGINE_register_ECDH(3), ENGINE_register_ECDSA(3), ENGINE_register_RAND(3), ENGINE_register_RSA(3), ENGINE_register_all_complete(3), ENGINE_register_ciphers(3), ENGINE_register_complete(3), ENGINE_register_digests(3), ENGINE_remove(3), ENGINE_set_DH(3), ENGINE_set_DSA(3), ENGINE_set_ECDH(3), ENGINE_set_ECDSA(3), ENGINE_set_RAND(3), ENGINE_set_RSA(3), ENGINE_set_ciphers(3), ENGINE_set_cmd_defns(3), ENGINE_set_ctrl_function(3), ENGINE_set_default(3), ENGINE_set_default_DH(3), ENGINE_set_default_DSA(3), ENGINE_set_default_ECDH(3), ENGINE_set_default_ECDSA(3), ENGINE_set_default_RAND(3), ENGINE_set_default_RSA(3), ENGINE_set_default_ciphers(3), ENGINE_set_default_digests(3), ENGINE_set_default_string(3), ENGINE_set_destroy_function(3), ENGINE_set_digests(3), ENGINE_set_finish_function(3), ENGINE_set_flags(3), ENGINE_set_id(3), ENGINE_set_init_function(3), ENGINE_set_load_privkey_function(3), ENGINE_set_load_pubkey_function(3), ENGINE_set_name(3), ENGINE_up_ref(3), ENGINE_get_table_flags(3), ENGINE_cleanup(3), ENGINE_load_builtin_engines(3), ENGINE_register_all_DH(3), ENGINE_register_all_DSA(3), ENGINE_register_all_ECDH(3), ENGINE_register_all_ECDSA(3), ENGINE_register_all_RAND(3), ENGINE_register_all_RSA(3), ENGINE_register_all_ciphers(3), ENGINE_register_all_digests(3), ENGINE_set_table_flags(3), ENGINE_unregister_DH(3), ENGINE_unregister_DSA(3), ENGINE_unregister_ECDH(3), ENGINE_unregister_ECDSA(3), ENGINE_unregister_RAND(3), ENGINE_unregister_RSA(3), ENGINE_unregister_ciphers(3), ENGINE_unregister_digests(3)
ENGINE cryptographic module support
EVP_PKEY_copy_parameters(3), EVP_PKEY_missing_parameters(3), EVP_PKEY_cmp_parameters(3), EVP_PKEY_cmp(3)
public key parameter and comparison functions
EVP_PKEY_keygen_init(3), EVP_PKEY_keygen(3), EVP_PKEY_paramgen_init(3), EVP_PKEY_paramgen(3), EVP_PKEY_CTX_set_cb(3), EVP_PKEY_CTX_get_cb(3), EVP_PKEY_CTX_get_keygen_info(3), EVP_PKEY_CTX_set_app_data(3), EVP_PKEY_CTX_get_app_data(3), EVP_PKEY_gen_cb(3)
key and parameter generation functions
EZ_AddEventHandler(3), EZ_RemoveEventHandler(3), EZ_RemoveAllEventHandlers (3)
register/remove event handlers associated to a widget
EZ_AddIdleCallBack(3), EZ_RemoveIdleCallBack(3), EZ_RemoveAllIdleCallBacks (3)
register/remove idle callbacks
EZ_AddInput(3), EZ_RemoveInput(3)
register/remove input handlers
EZ_AddItemCallBack(3), EZ_RemoveItemCallBack(3), EZ_RemoveAllItemCallBacks (3)
register/remove callbacks associated to a display item
EZ_AddWidgetCallBack(3), EZ_RemoveWidgetCallBack(3), EZ_RemoveAllWidgetCallBacks (3)
register/remove callbacks associated to a widget
EZ_CMove2f(3), EZ_CMoveScreen2f(3)
update the current character position
EZ_CMove3f(3), EZ_CMove3fv(3), EZ_CMoveScreen3f(3), EZ_CMoveScreen3fv (3)
update the current character position
EZ_CallWidgetCallbacks(3), EZ_CallWidgetMotionCallbacks(3)
invoke callbacks registered to a widget
EZ_ColorMaterial(3)
cause a material color to track the current color
EZ_CreateLabelPixmapFromImageFile(3), EZ_CreateLabelPixmapFromXBitmapData(3), EZ_CreateLabelPixmapFromXBitmapFile(3), EZ_CreateLabelPixmapFromXpmData(3), EZ_CreateLabelPixmapFromXpmFile(3), EZ_FreeLabelPixmap(3)
create/free an internal label pixmap from file or data
EZ_CreateRotateTextPixmap(3)
draw rotated text
EZ_CreateTimer(3), EZ_ResetTimer(3), EZ_CancelTimer(3), EZ_RestartTimer(3)
register a timer to EZWGL
EZ_DefineLightSrc(3), EZ_BindLightSrc(3)
define light source parameters
EZ_DefineMaterial(3), EZ_BindMaterial(3)
define material parameters
EZ_DrawString(3)
draw a string of characters
EZ_EnterEvent(3), EZ_GLEnterEvent(3)
enter an event
EZ_FancyListBoxClear(3), EZ_FancyListBoxDeleteRow(3), EZ_FancyListBoxInsertRow(3), EZ_FancyListBoxReplaceItem(3), EZ_FancyListBoxReplaceItemUsingIdx(3), EZ_FancyListBoxSelectItem(3), EZ_FancyListBoxSelectItemUsingIdx(3)
fancy listbox editing functions
EZ_FancyListBoxFindRowAtXY(3)
return a pointer to the row of items at a specified location
EZ_Fogfv(3)
set fog parameters
EZ_GenerateRotationMatrix(3)
generate a rotation matrix
EZ_GetBubbleHelp(3)
return EZWGL's internal bubble help widget
EZ_GetDefaultMaterial(3)
returns a internally defined material
EZ_GetDnDDragSrcXYOffset(3), EZ_GetDnDDragSrcXYOffset (3)
return the location of the mouse pointer relative to the upper left corner of the drag
EZ_GetLabelPixmapFromGLImage(3)
return the internal pixmap in a GL image
EZ_GetLoctorXY(3), EZ_SetLocatorXY(3), EZ_GetLocatorXY(3), -(3)
set/retrieve the pointer location
EZ_GetWidgetBorder(3), EZ_GetWidgetBorder (3)
return widget border characteristics
EZ_GetWidgetPixmap(3)
retrieve the internal pixmap used to label a widget
EZ_GlobFileName(3), EZ_GlobFileName (3)
return all files match a given pattern
EZ_GlobFiles(3), EZ_GlobFiles (3)
return all files match a given pattern
EZ_GlobHiddenFiles(3), EZ_GlobHiddenFiles (3)
set an internal flag for globbing
EZ_GrabPointer(3), EZ_UngrabPointer(3)
grab/ungrab the mouse pointer
EZ_InsertWidgetAfter(3), EZ_InsertWidgetBefore(3), EZ_SwapWidgets(3)
editing a widget tree
EZ_InstallSymbolicPointer(3), EZ_RetrieveSymbolicPointer(3)
install/retrieve a symbolic constant to/from the resource database
EZ_ItemAddDnDDataDecoder(3), EZ_ItemAddDnDDataEncoder(3), EZ_ItemDeleteDnDDataDecoder(3), EZ_ItemDeleteDnDDataEncoder EZ_ItemDeleteAllDnDDataDecoders(3), EZ_ItemDeleteAllDnDDataEncoders(3)
register/remove drag and drop(DnD) handlers
EZ_LightModelf(3), EZ_LightModelfv(3)
set lighting model parameters
EZ_Lightf(3), EZ_Lightfv(3)
set light source parameters
EZ_Materialf(3), EZ_Materialfv(3)
set material parameters
EZ_RegisterApplicationResources(3)
register a list of application resources
EZ_RegisterCompositeWidget(3)
register a Composite widget to EZWGL
EZ_RegisterMessageHandler(3), EZ_DeleteMessageHandler(3)
add/delete a message handler
EZ_RegisterPrimitiveWidget(3)
register a primitive widget to EZWGL
EZ_RegisterResourcesAll(3)
register a list of widget resources
EZ_RegisterWidget(3)
register your own widget
EZ_SSheetFindCursorCell(3)
return the cell under the pointer
EZ_SSheetSetTabChar(3)
set the cell delimiters
EZ_SetClientMessageHandler(3)
register a client message handler
EZ_SetDefaultMessageHandler(3)
register the default message handler
EZ_SetFancyListBoxRowBg(3)
set the alternating background colors for a fancy listbox widget
EZ_SetFileSelectorInitialPattern(3)
set the initial glob pattern for a file selector
EZ_SetGlobalEventFilter(3)
register a global event filter
EZ_SetGrab(3), EZ_ReleaseGrab(3)
grab pointer and keyboard to a widget
EZ_SetItemIntData(3), EZ_SetItemPtrData(3), EZ_SetItemClientData(3), EZ_GetItemIntData(3), EZ_GetItemPtrData(3), EZ_GetItemClientData(3)
set/retrieve client data registered to a display item
EZ_SetItemUnknownData(3), EZ_GetItemUnknownData(3), EZ_GetItemUnknownDataPtr(3)
register/retrieve arbitary data to a display item
EZ_SetStatusMeterBackground(3)
set the background color of a status meter
EZ_SetStatusMeterForeground(3), EZ_SetStatusMeterValueN(3)
set the value(s) of a status meter
EZ_SetStatusMeterRange(3), EZ_SetStatusMeterRangeN (3)
sets the range of a status meter
EZ_SetStatusMeterValue(3), EZ_SetStatusMeterValueN(3)
set the value(s) of a status meter
EZ_SetTimerCallBack(3)
register a timer callback
EZ_SetTreeWidgetRowBg(3)
set the alternating background colors for a tree widget
EZ_SetWidgetCallBack(3), EZ_SetWidgetCallBack (3)
register a callback to a widget
EZ_SetWidgetIntData(3), EZ_SetWidgetPtrData(3), EZ_SetWidgetClientData(3), EZ_GetWidgetIntData(3), EZ_GetWidgetPtrData(3), EZ_GetWidgetClientData(3)
set/retrieve client data registered to a widget
EZ_SetWidgetUnknownData(3), EZ_GetWidgetUnknownData(3), EZ_GetWidgetUnknownDataPtr(3)
register/retrieve arbitary data to a widget
EZ_StopStatusMeter(3), EZ_StartStatusMeter(3)
stop/start a status meter
EZ_TermStartCommand(3)
run command in a terminal emulator
EZ_TreeSetCharacter(3)
specify the parameters to display a tree
EZ_WarpPointer(3), EZ_WarpPointerToWidgetWindow(3)
move the mouse pointer
EZ_WidgetAddDnDDataDecoder(3), EZ_WidgetAddDnDDataEncoder(3), EZ_WidgetDeleteDnDDataDecoder(3), EZ_WidgetDeleteDnDDataEncoder EZ_WidgetDeleteAllDnDDataDecoders(3), EZ_WidgetDeleteAllDnDDataEncoders(3)
register/remove drag and drop(DnD) handlers
EZ_WidgetNotifyRuler(3), EZ_WidgetNotifyRuler-(3)
notify a ruler widget about the mouse pointer location
EZ_WorkAreaClear(3), EZ_WorkAreaDeleteItem(3), EZ_WorkAreaDeleteItemUsingIdx(3), EZ_WorkAreaInsertItem(3), EZ_WorkAreaInsertItemAfter(3), EZ_WorkAreaInsertItemBefore(3), EZ_WorkAreaInsertItemUsingIdx(3), EZ_WorkAreaRearrange(3), EZ_WorkAreaSelectItem(3), EZ_WorkAreaSelectItemUsingIdx (3)
work area editing functions
Eterm(1)
the Enlightened terminal emulator for the X Window System
FcBlanksAdd(3)
Add a character to an FcBlanks
FcCharSetAddChar(3)
Add a character to a charset
FcCharSetCreate(3)
Create an empty character set
FcCharSetDelChar(3)
Add a character to a charset
FcCharSetDestroy(3)
Destroy a character set
FcCharSetIntersect(3)
Intersect charsets
FcCharSetIntersectCount(3)
Intersect and count charsets
FcConfigGetRescanInterval(3)
Get config rescan interval
FcConfigSetRescanInterval(3)
Set config rescan interval
FcDefaultSubstitute(3)
Perform default substitutions in a pattern
FcFontRenderPrepare(3)
Prepare pattern for loading font file
FcFontSetPrint(3)
Print a set of patterns to stdout
FcFreeTypeQuery(3)
compute pattern from font file (and index)
FcFreeTypeQueryFace(3)
compute pattern from FT_Face
FcIsLower(3)
check for lower case ASCII character
FcIsUpper(3)
check for upper case ASCII character
FcLangGetCharSet(3)
Get character map for a language
FcNameParse(3)
Parse a pattern string
FcNameRegisterConstants(3)
Register symbolic constants
FcNameRegisterObjectTypes(3)
Register object types
FcNameUnparse(3)
Convert a pattern back into a string that can be parsed
FcNameUnregisterConstants(3)
Unregister symbolic constants
FcNameUnregisterObjectTypes(3)
Unregister object types
FcPatternAdd(3)
Add a value to a pattern
FcPatternAdd-Type(3), FcPatternAddInteger(3), FcPatternAddDouble(3), FcPatternAddString(3), FcPatternAddMatrix(3), FcPatternAddCharSet(3), FcPatternAddBool(3), FcPatternAddFTFace(3), FcPatternAddLangSet(3), FcPatternAddRange(3)
Add a typed value to a pattern
FcPatternAddWeak(3)
Add a value to a pattern with weak binding
FcPatternBuild(3), FcPatternVaBuild(3), FcPatternVapBuild(3)
Create patterns from arguments
FcPatternCreate(3)
Create a pattern
FcPatternDel(3)
Delete a property from a pattern
FcPatternDestroy(3)
Destroy a pattern
FcPatternDuplicate(3)
Copy a pattern
FcPatternEqual(3)
Compare patterns
FcPatternEqualSubset(3)
Compare portions of patterns
FcPatternFilter(3)
Filter the objects of pattern
FcPatternFormat(3)
Format a pattern into a string according to a format specifier
FcPatternGet(3)
Return a value from a pattern
FcPatternGet-Type(3), FcPatternGetInteger(3), FcPatternGetDouble(3), FcPatternGetString(3), FcPatternGetMatrix(3), FcPatternGetCharSet(3), FcPatternGetBool(3), FcPatternGetFTFace(3), FcPatternGetLangSet(3), FcPatternGetRange(3)
Return a typed value from a pattern
FcPatternHash(3)
Compute a pattern hash value
FcPatternPrint(3)
Print a pattern for debugging
FcPatternReference(3)
Increment pattern reference count
FcPatternRemove(3)
Remove one object of the specified type from the pattern
FcStrListCreate(3)
create a string iterator
FcStrListDone(3)
destroy a string iterator
FcStrListFirst(3)
get first string in iteration
FcStrListNext(3)
get next string in iteration
Feel(1x)
AfterStep feel configuration
FileCheck-cheri(1), FileCheck(1)
Flexible pattern matching file verifier rst2man-indent-level 0 1 rstReportMargin \$1
FileCheck-cheri128(1), FileCheck(1)
Flexible pattern matching file verifier rst2man-indent-level 0 1 rstReportMargin \$1
FileCheck-devel(1), FileCheck(1)
Flexible pattern matching file verifier rst2man-indent-level 0 1 rstReportMargin \$1
FileCheck38(1), FileCheck(1)
Flexible pattern matching file verifier rst2man-indent-level 0 1 rstReportMargin \$1
FileCheck39(1), FileCheck(1)
Flexible pattern matching file verifier rst2man-indent-level 0 1 rstReportMargin \$1
FileCheck40(1), FileCheck(1)
Flexible pattern matching file verifier rst2man-indent-level 0 1 rstReportMargin \$1
Functions(1x)
built in AfterStep functions
FvwmClean(1)
the FVWM desktop clutter reduction module
FvwmCommand(1)
FVWM command external interface
FvwmConsole(1)
an FVWM command input interface
FvwmConsoleC.pl(1)
Command editor for FVWM command input interface
FvwmGtkDebug(1)
graphical interactive FVWM module debugger
FvwmScript(1)
module to build graphic user interface
FvwmWharf(1)
the AfterStep application "dock" module ported to Fvwm
GENLIB_LOSIG(3)
declare an internal logical signal, or a vector of internal logical signals
GENLIB_MACRO(3)
Interface with all MACRO generators
GENLIB_SET_LOCAP(3)
set the capacitance value of a logical capacitor, after its creation. man1/alc_origin.1
GENLIB_SET_LORES(3)
set the resistance value of a logical resistor, after its creation. man1/alc_origin.1
GENLIB_SET_LOSELF(3)
set the inductance value of a logical inductor, after its creation. man1/alc_origin.1
Git(3)
Perl interface to the Git version control system
Git::I18N(3)
Perl interface to Git's Gettext localizations
Gravity(1x)
Afterstep Gravity
HPL_dlamch(3)
determines machine-specific arithmetic constants
HPL_dlaswp00N(3)
performs a series of row interchanges
HPL_dlaswp10N(3)
performs a series column interchanges
HPL_pdinfo(3)
Read input parameter file
HPL_pdlamch(3)
determines machine-specific arithmetic constants
HPL_pnum(3)
Rank determination
Hanzi Converter(1), hc(1)
convert a GB file to a BIG-5 file, or a BIG-5 file to a GB file
INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3)
SNMP daemon loadable module interface
IV_EVENT_INIT(3), iv_event_register(3), iv_event_unregister(3), iv_event_post(3)
manage ivykis objects for event notification
IV_EVENT_RAW_INIT(3), iv_event_raw_register(3), iv_event_raw_unregister(3), iv_event_raw_post(3)
manage ivykis objects for event notification
IV_SIGNAL_INIT(3), iv_signal_register(3), iv_signal_unregister(3)
ivykis signal handling
IV_WAIT_INTEREST_INIT(3), iv_wait_interest_register(3), iv_wait_interest_register_spawn(3), iv_wait_interest_unregister(3), iv_wait_interest_kill(3)
ivykis wait4 (2) wrapper
Itcl_RegisterC(3), Itcl_RegisterObjC(3), Itcl_FindC(3)
Associate a symbolic name with a C procedure
JSLD(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JSLF(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JSLFA(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JSLG(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JSLI(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JSLL(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JSLN(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JSLP(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JudySL(3), JudySL macros(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an Index (associative array)
JudySLDel(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySLFirst(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySLFreeArray(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySLGet(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySLIns(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySLLast(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySLNext(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySLPrev(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
JudySL_funcs(3), JudySL functions(3)
C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
LessTifInternals(3), _Xm*(3)
LessTif Internal Functions
Look(1x)
AfterStep look
MBK_CK(1)
define the clock name pattern
MBK_FILTER_SFX(1)
define the input/output filter suffixe. man1/alc_origin.1
MBK_IN_FILTER(1)
define the input filter man1/alc_origin.1
MBK_OUT_FILTER(1)
define the input filter man1/alc_origin.1
MBK_SEPAR(1)
define the separator character for hierarchy
MBK_VDD(1)
define the high level power name pattern
MBK_VSS(1)
define the ground power name pattern
MENU_PLAYER(3)
Stores GUI data internally used by Allegro
MODULE_PNP_INFO(9)
register plug and play information for device matching
MP4GetHintTrackRtpPayload(3)
Get the RTP payload parameters of the hint track
MP4SetHintTrackRtpPayload(3)
Set the RTP payload parameters of the hint track
MP4WriteRtpHint(3)
Write an RTP hint
MPE_Finish_log(4)
Send log to master, who writes it out
MPE_GetHostName(4)
Parameters: + name : character pointer - nlen : integer
MPIX_Ireduce_scatter(3)
XXX description here
MPIX_Ireduce_scatter_block(3)
XXX description here
MPIX_Iscatter(3)
XXX description here
MPIX_Iscatterv(3)
XXX description here
MPIX_Win_shared_query(3)
Query the size and base pointer for a patch of a shared memory window
MPI_Abort(3)
Terminates MPI execution environment
MPI_Cart_coords(3)
Determines process coords in cartesian topology given rank in group
MPI_Cart_rank(3)
Determines process rank in communicator given Cartesian location
MPI_Comm_accept(3)
Accept a request to form a new intercommunicator
MPI_Comm_connect(3)
Make a request to form a new intercommunicator
MPI_Comm_rank(3)
Determines the rank of the calling process in the communicator
MPI_Comm_remote_group(3)
Accesses the remote group associated with the given inter-communicator
MPI_Comm_remote_size(3)
Determines the size of the remote group associated with an inter-communictor
MPI_Comm_size(3)
Determines the size of the group associated with a communicator
MPI_Comm_test_inter(3)
Tests to see if a comm is an inter-communicator
MPI_File_get_position(3)
Returns the current position of the individual file pointer in etype units relative to the current view
MPI_File_get_position_shared(3)
Returns the current position of the shared file pointer in etype units relative to the current view
MPI_File_iread(3)
Nonblocking read using individual file pointer
MPI_File_iread_all(3)
Nonblocking collective read using individual file pointer
MPI_File_iread_shared(3)
Nonblocking read using shared file pointer
MPI_File_iwrite(3)
Nonblocking write using individual file pointer
MPI_File_iwrite_all(3)
Nonblocking collective write using individual file pointer
MPI_File_iwrite_shared(3)
Nonblocking write using shared file pointer
MPI_File_read(3)
Read using individual file pointer
MPI_File_read_all(3)
Collective read using individual file pointer
MPI_File_read_all_begin(3)
Begin a split collective read using individual file pointer
MPI_File_read_all_end(3)
Complete a split collective read using individual file pointer
MPI_File_read_ordered(3)
Collective read using shared file pointer
MPI_File_read_ordered_begin(3)
Begin a split collective read using shared file pointer
MPI_File_read_ordered_end(3)
Complete a split collective read using shared file pointer
MPI_File_read_shared(3)
Read using shared file pointer
MPI_File_seek(3)
Updates the individual file pointer
MPI_File_seek_shared(3)
Updates the shared file pointer
MPI_File_write(3)
Write using individual file pointer
MPI_File_write_all(3)
Collective write using individual file pointer
MPI_File_write_all_begin(3)
Begin a split collective write using individual file pointer
MPI_File_write_all_end(3)
Complete a split collective write using individual file pointer
MPI_File_write_ordered(3)
Collective write using shared file pointer
MPI_File_write_ordered_begin(3)
Begin a split collective write using shared file pointer
MPI_File_write_ordered_end(3)
Complete a split collective write using shared file pointer
MPI_File_write_shared(3)
Write using shared file pointer
MPI_Finalize(3)
Terminates MPI execution environment
MPI_Group_intersection(3)
Produces a group as the intersection of two existing groups
MPI_Intercomm_create(3)
Creates an intercommuncator from two intracommunicators
MPI_Intercomm_merge(3)
Creates an intracommuncator from an intercommunicator
MPI_Ireduce_scatter(3)
Combines values and scatters the results in a nonblocking way
MPI_Ireduce_scatter_block(3)
Combines values and scatters the results in a nonblocking way
MPI_Iscatter(3)
Sends data from one process to all other processes in a communicator in a nonblocking way
MPI_Iscatterv(3)
Scatters a buffer in parts to all processes in a communicator in a nonblocking way
MPI_Pack_external(3)
Packs a datatype into contiguous memory, using the external32 format
MPI_Pack_external_size(3)
Returns the upper bound on the amount of space needed to pack a message using MPI_Pack_external
MPI_Reduce_scatter(3)
Combines values and scatters the results
MPI_Reduce_scatter_block(3)
Combines values and scatters the results
MPI_Register_datarep(3)
Register functions for user-defined data representations
MPI_Scatter(3)
Sends data from one process to all other processes in a communicator
MPI_Scatterv(3)
Scatters a buffer in parts to all processes in a communicator
MPI_T_finalize(3)
Finalize the MPI tool information interface
MPI_Topo_test(3)
Determines the type of topology (if any) associated with a communicator
MPI_Unpack_external(3)
Unpack a buffer (packed with MPI_Pack_external) according to a datatype into contiguous memory
MPI_Win_complete(3)
Completes an RMA operations begun after an MPI_Win_start
MPI_Win_shared_query(3)
Query the size and base pointer for a patch of a shared memory window
Method(3), Tcl_ClassSetConstructor(3), Tcl_ClassSetDestructor(3), Tcl_MethodDeclarerClass(3), Tcl_MethodDeclarerObject(3), Tcl_MethodIsPublic(3), Tcl_MethodIsType(3), Tcl_MethodName(3), Tcl_NewInstanceMethod(3), Tcl_NewMethod(3), Tcl_ObjectContextIsFiltering(3), Tcl_ObjectContextMethod(3), Tcl_ObjectContextObject(3), Tcl_ObjectContextSkippedArgs(3)
manipulate methods and method-call contexts
MrmFetchBitmapLiteral(3)
Fetches a bitmap literal from a hierarchy "MrmFetchBitmapLiteral" "uil functions" "MrmFetchBitmapLiteral"
MrmFetchColorLiteral(3)
Fetches a named color literal from a UID file "MrmFetchColorLiteral" "uil functions" "MrmFetchColorLiteral" "uid file"
MrmFetchIconLiteral(3)
Fetches an icon literal from a hierarchy "MrmFetchIconLiteral" "uil functions" "MrmFetchIconLiteral"
MrmFetchLiteral(3)
Fetches a literal from a UID file "MrmFetchLiteral" "uil functions" "MrmFetchLiteral"
MrmFetchSetValues(3)
Fetches the values to be set from literals stored in UID files "MrmFetchSetValues" "uil functions" "MrmFetchSetValues"
MrmRegisterClass(3)
Saves the information needed for MRM to access the widget creation function for user-defined widgets "MrmRegisterClass" "uil functions" "MrmRegisterClass"
MrmRegisterNames(3)
Registers the values associated with the names referenced in UIL (for example, UIL callback function names or UIL identifier names) "MrmRegisterNames" "uil functions" "MrmRegisterNames"
MrmRegisterNamesInHierarchy(3)
Registers the values associated with the names referenced in UIL within a single hierarchy (for example, UIL callback function names or UIL identifier names) "MrmRegisterNamesIn\%Hierarchy" "uil functions" "MrmRegisterNamesIn\%Hierarchy"
Munin::Master::Config(3)
Holds the master configuration
Munin::Master::Group(3)
Holds information on host groups. Groups can be nested
Munin::Master::GroupRepository(3)
FIX
Munin::Master::HTMLOld(3), munin-html(3)
A program to draw html-pages on an Munin installation
Munin::Master::Host(3)
Holds information on hosts we are interested in collecting data from
Munin::Master::Logger(3)
Munin master's old logging routines
Munin::Master::Node(3)
Provides easy access to the munin node
Munin::Master::ProcessManager(3)
Manager for parallel execution of Workers
Munin::Master::Update(3)
Contacts Munin Nodes, gathers data from their service data sources, and stores this information in RRD files
Munin::Master::UpdateWorker(3)
FIX
Munin::Master::Utils(3)
Exports a lot of utility functions
Munin::Master::Worker(3)
Abstract base class for workers
Munin::Node::Configure::History(3)
Filtering plugins based on the version of Munin they were first distributed with
Munin::Node::Session(3)
Stores the state for the session between a node and a master
Munin::Node::SpoolWriter(3)
Writing side of the spool functionality
MyFrame(1x)
defines how AfterStep should construct window's frame
NetInfo(5)
Defines machine interfaces to register with AFS servers
NetRestrict(5)
Defines interfaces not to register with AFS servers
NgMkSockNode(3), NgNameNode(3), NgSendMsg(3), NgSendAsciiMsg(3), NgSendReplyMsg(3), NgRecvMsg(3), NgAllocRecvMsg(3), NgRecvAsciiMsg(3), NgAllocRecvAsciiMsg(3), NgSendData(3), NgRecvData(3), NgAllocRecvData(3), NgSetDebug(3), NgSetErrLog(3)
netgraph user library
OF_device_from_xref(9), OF_xref_from_device(9), OF_device_register_xref(9)
manage mappings between xrefs and devices
Obj(3o)
Operations on internal representations of values
OpenSSL_add_all_algorithms(3), OpenSSL_add_all_ciphers(3), OpenSSL_add_all_digests(3), EVP_cleanup(3)
add algorithms to internal table
PC(3), UP(3), BC(3), ospeed(3), tgetent(3), tgetflag(3), tgetnum(3), tgetstr(3), tgoto(3), tputs(3)
direct curses interface to the terminfo capability database
PC(3x), UP(3x), BC(3x), ospeed(3x), tgetent(3x), tgetflag(3x), tgetnum(3x), tgetstr(3x), tgoto(3x), tputs(3x)
direct curses interface to the terminfo capability database
PKCS5_PBKDF2_HMAC(3), PKCS5_PBKDF2_HMAC_SHA1(3)
password based derivation routines with salt and iteration count
PQexecf(3)
Prepares parameters and executes a command
PQgeterror(3), PQseterror(3), PQgetErrorField(3)
libpqtypes error system management functions
PQparamExec(3), PQparamExecPrepared(3)
Executes a paramertized query using the parameters in a PGparam
PQparamSendQuery(3), PQparamSendQueryPrepared(3)
Executes an asynchronous paramertized query using the parameters in a PGparam
PQputf(3), PQputvf(3)
Packs a set of parameters in a PGparam for use with a parameterized query
PQregisterComposites(3)
Registers a composites
PQregisterResult(3)
Registers sub-classes, composites and user-defined types found within a PGresult
PQregisterSubClasses(3)
Registers a type aliases or sub-classes
PQregisterTypes(3)
Registers sub-classes, composites and user-defined types
PQregisterUserDefinedTypes(3)
Registers a user-defined types
PQtypesRegister(3)
Registers libpqtypes with the libpq event system
PS_arc(3)
Draws an arc counterclockwise
PS_begin_pattern(3)
Starts a new pattern
PS_end_pattern(3)
Ends a pattern
PS_get_buffer(3)
Returns internal memory buffer
PS_get_opaque(3)
Returns pointer which has been passed to PS_new2()
PS_get_parameter(3)
Gets certain parameters
PS_include_file(3)
Include external PostScript file
PS_list_parameters(3)
List all set parameters
PS_open_fp(3)
Uses an already open file pointer as the output file
PS_open_image(3)
Reads an image for later placement
PS_set_parameter(3)
Sets certain parameters
PS_setmiterlimit(3)
Sets the miter limit
PS_shading_pattern(3)
Create a shading pattern
PTAInterpolate(1)
Interpolate intermediate images between stereo photos
Pager(1)
the AfterStep Pager module
Pager(1x)
AfterStep module for virtual desktop navigation
Placement(1x)
AfterStep supports several different window placement policies. Some of them designed to fill free space, and some allowing for windows to be placed on top of others
Planimeter(1)
-- compute the area of geodesic polygons
Pprintast.printer(3o)
no description
QUAT(3)
Stores quaternion information. Allegro game programming library
REFRESH_MATERIALIZED_VIEW(7)
replace the contents of a materialized view
RESET(7)
restore the value of a run-time parameter to the default value
RSA_print(3), RSA_print_fp(3), DSAparams_print(3), DSAparams_print_fp(3), DSA_print(3), DSA_print_fp(3), DHparams_print(3), DHparams_print_fp(3)
print cryptographic parameters
RT::Authen::ExternalAuth(3)
RT Authentication using External Sources
RT::Authen::ExternalAuth::DBI(3)
External database source for RT authentication
RT::Authen::ExternalAuth::DBI::Cookie(3)
Database-backed, cookie SSO source for RT authentication
RT::Authen::ExternalAuth::LDAP(3)
LDAP source for RT authentication
RT::Interface::Email::Action::CommandByMail(3)
Change metadata of ticket via email
RT::Interface::Email::Filter::TakeAction(3)
Change metadata of ticket via email
RkCvtHan(3), RkCvtHan / RkwCvtHan(3)
convert double-width symbols, alphanumeric characters, hiragana, and katakana to single-width characters
RkCvtRoma(3)
convert an entire character string from Romaji to kana by iteratively using RkMapRoma
RkCvtZen(3)
convert ASCII characters and single-width katakana to double-width characters
RkEndBun(3)
terminate kana-kanji conversion
RkFinalize(3)
terminate the kana-kanji conversion functions
RlwrapFilter(3pm)
Perl class for rlwrap filters
SDL_AddTimer(3)
Add a timer which will call a callback after the specified number of milliseconds has elapsed
SDL_CreateRGBSurface(3)
Create an empty SDL_Surface
SDL_CreateRGBSurfaceFrom(3)
Create an SDL_Surface from pixel data
SDL_GetError(3)
Get SDL error string
SDL_GetEventFilter(3)
Retrieves a pointer to he event filter
SDL_GetVideoInfo(3)
returns a pointer to information about the video hardware
SDL_GetVideoSurface(3)
returns a pointer to the current display surface
SDL_JoystickOpened(3)
Determine if a joystick has been opened
SDL_KillThread(3)
Gracelessly terminates the thread
SDL_ListModes(3)
Returns a pointer to an array of available screen dimensions for the given format and video flags
SDL_OpenAudio(3)
Opens the audio device with the desired parameters
SDL_SetEventFilter(3)
Sets up a filter to process all events before they are posted to the event queue
SDL_SetTimer(3)
Set a callback to run after the specified number of milliseconds has elapsed
SDL_UpdateRect(3)
Makes sure the given area is updated on the given screen
SDL_UpdateRects(3)
Makes sure the given list of rectangles is updated on the given screen
SDLmm_todo(3), todo(3)
Todo List "Class SDLmm::SRect " 1c Extend the class with useful utility functions in regards to rectangles like intersections. "Class SDLmm::Surface " 1c Implement a better constructor scheme, where the first argument is a dummy class which specified what to do. This would allow a construct where a surface can be loaded from an image file without first having to create an unitialized object. "Class SDLmm::VideoInfo " 1c Build a status function allowing for easier access to the flags. This can be done using a bitfield which would allow for checking for multiple features at once
SET(7)
change a run-time parameter
SET_TRANSACTION(7)
set the characteristics of the current transaction
SHOW(7)
show the value of a run-time parameter
SLIST_CLASS_ENTRY(3), SLIST_CLASS_HEAD(3), SLIST_CONCAT(3), SLIST_EMPTY(3), SLIST_ENTRY(3), SLIST_FIRST(3), SLIST_FOREACH(3), SLIST_FOREACH_FROM(3), SLIST_FOREACH_FROM_SAFE(3), SLIST_FOREACH_SAFE(3), SLIST_HEAD(3), SLIST_HEAD_INITIALIZER(3), SLIST_INIT(3), SLIST_INSERT_AFTER(3), SLIST_INSERT_HEAD(3), SLIST_NEXT(3), SLIST_REMOVE(3), SLIST_REMOVE_AFTER(3), SLIST_REMOVE_HEAD(3), SLIST_SWAP(3), STAILQ_CLASS_ENTRY(3), STAILQ_CLASS_HEAD(3), STAILQ_CONCAT(3), STAILQ_EMPTY(3), STAILQ_ENTRY(3), STAILQ_FIRST(3), STAILQ_FOREACH(3), STAILQ_FOREACH_FROM(3), STAILQ_FOREACH_FROM_SAFE(3), STAILQ_FOREACH_SAFE(3), STAILQ_HEAD(3), STAILQ_HEAD_INITIALIZER(3), STAILQ_INIT(3), STAILQ_INSERT_AFTER(3), STAILQ_INSERT_HEAD(3), STAILQ_INSERT_TAIL(3), STAILQ_LAST(3), STAILQ_NEXT(3), STAILQ_REMOVE(3), STAILQ_REMOVE_AFTER(3), STAILQ_REMOVE_HEAD(3), STAILQ_SWAP(3), LIST_CLASS_ENTRY(3), LIST_CLASS_HEAD(3), LIST_CONCAT(3), LIST_EMPTY(3), LIST_ENTRY(3), LIST_FIRST(3), LIST_FOREACH(3), LIST_FOREACH_FROM(3), LIST_FOREACH_FROM_SAFE(3), LIST_FOREACH_SAFE(3), LIST_HEAD(3), LIST_HEAD_INITIALIZER(3), LIST_INIT(3), LIST_INSERT_AFTER(3), LIST_INSERT_BEFORE(3), LIST_INSERT_HEAD(3), LIST_NEXT(3), LIST_PREV(3), LIST_REMOVE(3), LIST_SWAP(3), TAILQ_CLASS_ENTRY(3), TAILQ_CLASS_HEAD(3), TAILQ_CONCAT(3), TAILQ_EMPTY(3), TAILQ_ENTRY(3), TAILQ_FIRST(3), TAILQ_FOREACH(3), TAILQ_FOREACH_FROM(3), TAILQ_FOREACH_FROM_SAFE(3), TAILQ_FOREACH_REVERSE(3), TAILQ_FOREACH_REVERSE_FROM(3), TAILQ_FOREACH_REVERSE_FROM_SAFE(3), TAILQ_FOREACH_REVERSE_SAFE(3), TAILQ_FOREACH_SAFE(3), TAILQ_HEAD(3), TAILQ_HEAD_INITIALIZER(3), TAILQ_INIT(3), TAILQ_INSERT_AFTER(3), TAILQ_INSERT_BEFORE(3), TAILQ_INSERT_HEAD(3), TAILQ_INSERT_TAIL(3), TAILQ_LAST(3), TAILQ_NEXT(3), TAILQ_PREV(3), TAILQ_REMOVE(3), TAILQ_SWAP(3)
implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
SLONIK_CLUSTER_NAME(7), CLUSTER NAME(7)
preamble - identifying Slony-I cluster
SLONIK_EXIT(7), EXIT(7)
Terminate Slonik script with signal
SLONIK_INIT_CLUSTER(7), INIT CLUSTER(7)
Initialize Slony-I cluster
SLONIK_REPAIR_CONFIG(7), REPAIR CONFIG(7)
Resets the name-to-oid mapping of tables in a replication set, useful for restoring a node after a pg_dump
SP(3x), acs_map(3x), boolcodes(3x), boolfnames(3x), boolnames(3x), cur_term(3x), numcodes(3x), numfnames(3x), numnames(3x), strcodes(3x), strfnames(3x), strnames(3x), ttytype(3x)
curses terminfo global variables
SPI_cursor_open_with_args(3)
set up a cursor using a query and parameters
SPI_cursor_open_with_paramlist(3)
set up a cursor using parameters
SPI_execute_with_args(3)
execute a command with out-of-line parameters
SPI_fname(3)
determine the column name for the specified column number
SPI_fnumber(3)
determine the column number for the specified column name
SSL_CTX_ctrl(3), SSL_CTX_callback_ctrl(3), SSL_ctrl(3), SSL_callback_ctrl(3)
internal handling functions for SSL_CTX and SSL objects
SSL_CTX_get0_param(3), SSL_get0_param(3), SSL_CTX_set1_param(3), SSL_set1_param(3)
get and set verification parameters
SSL_CTX_get_ex_new_index(3), SSL_CTX_set_ex_data(3), SSL_CTX_get_ex_data(3)
internal application specific data functions
SSL_CTX_get_verify_mode(3), SSL_get_verify_mode(3), SSL_CTX_get_verify_depth(3), SSL_get_verify_depth(3), SSL_get_verify_callback(3), SSL_CTX_get_verify_callback(3)
get currently set verification parameters
SSL_CTX_sess_set_new_cb(3), SSL_CTX_sess_set_remove_cb(3), SSL_CTX_sess_set_get_cb(3), SSL_CTX_sess_get_new_cb(3), SSL_CTX_sess_get_remove_cb(3), SSL_CTX_sess_get_get_cb(3)
provide callback functions for server side external session caching
SSL_CTX_sessions(3)
access internal session cache
SSL_SESSION_get_ex_new_index(3), SSL_SESSION_set_ex_data(3), SSL_SESSION_get_ex_data(3)
internal application specific data functions
SSL_get_client_random(3), SSL_get_server_random(3), SSL_SESSION_get_master_key(3)
retrieve internal TLS/SSL random values and master key
SSL_get_ex_data_X509_STORE_CTX_idx(3), SSL_CTX_set_verify(3), SSL_set_verify(3), SSL_CTX_set_verify_depth(3), SSL_set_verify_depth(3), SSL_verify_cb(3)
set peer certificate verification parameters
SSL_get_ex_new_index(3), SSL_set_ex_data(3), SSL_get_ex_data(3)
internal application specific data functions
SSL_get_extms_support(3)
extended master secret support
SSL_library_init(3), OpenSSL_add_ssl_algorithms(3)
initialize SSL library by registering algorithms
SSL_num_renegotiations(3), SSL_clear_num_renegotiations(3), SSL_total_renegotiations(3)
renegotiation counters
SSL_set1_host(3), SSL_add1_host(3), SSL_set_hostflags(3), SSL_get0_peername(3)
SSL server verification parameters
SWISH-LIBRARY(1)
Interface to the Swish-e C library
SbName(3iv)
character string stored in a hash table
SbPList(3iv)
list of generic (void *) pointers
SbString(3iv)
class for smart character strings
Smokeping_probes_AnotherDNS(3), Smokeping::probes::AnotherDNS(3)
Alternate DNS Probe
Smokeping_probes_WebProxyFilter(3), Smokeping::probes::WebProxyFilter(3)
tests webproxy filter performance and function
Smokeping_sorters_Loss(3), Smokeping::sorters::Loss(3)
Order the target charts by loss
Smokeping_sorters_Max(3), Smokeping::sorters::Max(3)
Order the target charts by Max RTT
Smokeping_sorters_Median(3), Smokeping::sorters::Median(3)
Order the target charts by Median RTT
Smokeping_sorters_StdDev(3), Smokeping::sorters::StdDev(3)
Order the target charts by StdDev
Smokeping_sorters_base(3), Smokeping::sorters::base(3)
Base Class for implementing SmokePing Sorters
SoBaseList(3iv)
maintains a list of pointers to instances of the SoBase classes
SoByteStream(3iv)
converts scene graph objects to character byte streams
SoCenterballDragger(3iv)
striped ball you rotate and re-center by dragging with the mouse
SoCenterballManip(3iv)
transform node with 3D interface for editing rotation and center
SoComputeBoundingBox(3iv)
computes the bounding box and center of a scene graph
SoCounter(3iv)
triggered integer counter
SoDirectionalLightManip(3iv)
directional light node with 3D interface for editing direction
SoEngineList(3iv)
maintains a list of pointers to engines
SoEngineOutputList(3iv)
maintains a list of pointers to engine outputs
SoFieldList(3iv)
maintains a list of pointers to fields
SoHandleBoxManip(3iv)
transform node with 3D Interface for Editing ScaleFactor and Translation
SoInteraction(3iv)
initializes Inventor interaction classes
SoInteractionKit(3iv)
base class for all interaction nodekit classes
SoInterpolate(3iv)
base class for all interpolator engines
SoInterpolateFloat(3iv)
interpolates floating-point values
SoInterpolateRotation(3iv)
interpolates rotation values
SoInterpolateVec2f(3iv)
interpolates 2D floating-point vectors
SoInterpolateVec3f(3iv)
interpolates 3D floating-point vectors
SoInterpolateVec4f(3iv)
interpolates 4D floating-point vectors
SoJackManip(3iv)
transform node with 3D interface for rotating, scaling, and translating
SoMFEngine(3iv)
multiple-value field containing any number of pointers to engines
SoMFNode(3iv)
multiple-value field containing any number of pointers to nodes
SoMFPath(3iv)
multiple-value field containing any number of pointers to paths
SoMaterial(3iv)
surface material definition node
SoMaterialBinding(3iv)
node that specifies how multiple materials are bound to shapes
SoNodeList(3iv)
maintains a list of pointers to nodes
SoPathList(3iv)
maintains a list of pointers to paths
SoPickedPointList(3iv)
maintains a list of pointers to SoPickedPoint instances
SoPointLightManip(3iv)
point light node with 3D interface for editing location
SoQuadMesh(3iv)
quadrilateral mesh shape node
SoRayPickAction(3iv)
intersects objects with a ray cast into scene
SoSFEngine(3iv)
field containing a pointer to a engine
SoSFNode(3iv)
field containing a pointer to a node
SoSFPath(3iv)
field containing a pointer to an SoPath
SoSpotLightManip(3iv)
spotlight node with 3D interface for editing location, direction, and beam width
SoTabBoxManip(3iv)
transform node with 3D Interface for editing scale and translation
SoTimeCounter(3iv)
timed integer counter
SoTimerSensor(3iv)
sensor that triggers callback repeatedly at regular intervals
SoTrackballManip(3iv)
transform node with 3D interface for changing rotation and scaling
SoTranReceiver(3iv)
interprets database changes for transcription
SoTransformBoxManip(3iv)
transform node with 3D interface for changing scaling, rotation, and translation
SoTransformManip(3iv)
base class for all transform Nodes with built-in 3D user interfaces
SoTransformerManip(3iv)
transform node with 3D interface for changing scaling, rotation, and translation
SoXtMaterialEditor(3iv)
Component which lets you edit a material interactively
SoXtMaterialList(3iv)
component which lets you edit a material interactively
SoXtMaterialSliderSet(3iv)
component with Motif sliders for editing SoMaterial nodes
Sound(1x)
AfterStep module for playing sounds when windowing event occurs
SupportedHints(1x)
Afterstep SupportedHints
Sympa::Alarm(3Sympa)
Spool on memory for listmaster notification
Sympa::ConfDef(3Sympa)
Definition of site and robot configuration parameters
Sympa::DatabaseDriver::Sybase(3Sympa)
Database driver for Adaptive Server Enterprise
Sympa::Internals(3Sympa)
Sympa internals
Sympa::Internals::Workflow(3Sympa)
Overview on workflow of Sympa
Sympa::ListDef(3Sympa)
Definition of list configuration parameters
Sympa::ListOpt(3Sympa)
Definition of list configuration parameter values
Sympa::Message(3Sympa)
Mail message embedding for internal use in Sympa
Sympa::Spindle::ToAlarm(3Sympa)
Process to store messages into spool on memory for listmaster notification
Sys(3o)
System interface
TIFFError(3tiff), TIFFSetErrorHandler(3tiff)
library error handling interface
TIFFFindCODEC(3tiff), TIFFRegisterCODEC(3tiff), TIFFUnRegisterCODEC(3tiff), TIFFIsCODECConfigured(3tiff)
codec-related utility routines
TIFFRGBAImageOK(3tiff), TIFFRGBAImageBegin(3tiff), TIFFRGBAImageGet(3tiff), TIFFRGBAImageEnd(3tiff)
read and decode an image into a raster
TIFFReadRGBAImage(3tiff), TIFFReadRGBAImageOriented(3tiff)
read and decode an image into a fixed-format raster
TIFFReadRGBAStrip(3tiff)
read and decode an image strip into a fixed-format raster
TIFFReadRGBATile(3tiff)
read and decode an image tile into a fixed-format raster
TIFFScanlineSize(3tiff), TIFFRasterScanlineSize(3tiff)
return the size of various items associated with an open TIFF file
TIFFWarning(3tiff), TIFFSetWarningHandler(3tiff)
library warning interface
TIFFWriteRawStrip(3tiff)
write a strip of raw data to an open TIFF file
TIFFWriteRawTile(3tiff)
write a tile of raw data to an open TIFF file
TbarLayout(1x)
Afterstep TbarLayout
Tspi_Context_GetKeyByPublicInfo(3)
search the persistent storage for a registered key using the provided public key information
Tspi_Context_GetKeyByUUID(3)
get a handle to a key registered in persistent storage
Tspi_Context_GetRegisteredKeysByUUID(3)
get an array of TSS_KM_KEYINFO structures based on the state of persistent storage
Tspi_Context_GetRegisteredKeysByUUID2(3)
get an array of TSS_KM_KEYINFO2 structures based on the state of persistent storage
Tspi_Context_LoadKeyByUUID(3)
load a key that's been registered in persistent storage
Tspi_Context_RegisterKey(3)
register a key in the TSS Persistent Storage database
Tspi_Context_UnregisterKey(3)
unregister a key from the persistent storage device
Tspi_TPM_DirRead(3)
Read a Data Integrity Register
Tspi_TPM_DirWrite(3)
write to a Data Integrity Register
Tspi_TPM_PcrExtend(3)
extend a PCR register and optionally write the PCR event log
Tspi_TPM_PcrRead(3)
read the value in a PCR register
Tspi_TPM_SelfTestFull(3)
perform a self-test of each internal TPM function
UI(3), UI_new(3), UI_new_method(3), UI_free(3), UI_add_input_string(3), UI_dup_input_string(3), UI_add_verify_string(3), UI_dup_verify_string(3), UI_add_input_boolean(3), UI_dup_input_boolean(3), UI_add_info_string(3), UI_dup_info_string(3), UI_add_error_string(3), UI_dup_error_string(3), UI_construct_prompt(3), UI_add_user_data(3), UI_get0_user_data(3), UI_get0_result(3), UI_process(3), UI_ctrl(3), UI_set_default_method(3), UI_get_default_method(3), UI_get_method(3), UI_set_method(3), UI_OpenSSL(3), UI_null(3)
user interface
UIL(5)
The user interface language file format "user interface language" "UIL"
UI_METHOD(3), UI_create_method(3), UI_destroy_method(3), UI_method_set_opener(3), UI_method_set_writer(3), UI_method_set_flusher(3), UI_method_set_reader(3), UI_method_set_closer(3), UI_method_set_prompt_constructor(3), UI_method_set_ex_data(3), UI_method_get_opener(3), UI_method_get_writer(3), UI_method_get_flusher(3), UI_method_get_reader(3), UI_method_get_closer(3), UI_method_get_prompt_constructor(3), UI_method_get_ex_data(3)
user interface method creation and destruction
UI_STRING(3), UI_string_types(3), UI_get_string_type(3), UI_get_input_flags(3), UI_get0_output_string(3), UI_get0_action_string(3), UI_get0_result_string(3), UI_get0_test_string(3), UI_get_result_minsize(3), UI_get_result_maxsize(3), UI_set_result(3)
User interface string parsing
UI_new(3), UI_new_method(3), UI_free(3), UI_add_input_string(3), UI_dup_input_string(3), UI_add_verify_string(3), UI_dup_verify_string(3), UI_add_input_boolean(3), UI_dup_input_boolean(3), UI_add_info_string(3), UI_dup_info_string(3), UI_add_error_string(3), UI_dup_error_string(3), UI_construct_prompt(3), UI_add_user_data(3), UI_get0_user_data(3), UI_get0_result(3), UI_process(3), UI_ctrl(3), UI_set_default_method(3), UI_get_default_method(3), UI_get_method(3), UI_set_method(3), UI_OpenSSL(3), ERR_load_UI_strings(3)
New User Interface
UVI(3), Moisture(3), Barometer(3), HUB(3)
HobbyBoards EE/EF Microprocessor-based slaves: Ultra Violet (UV) Index sensor, Soil and Leaf moisture measurements, Barometer, 4-channel hub with switchable branches
Unix(3o)
Interface to the Unix system
VFS(9)
kernel interface to file systems
Weak(3o)
Arrays of weak pointers and hash tables of weak pointers
Wharf(1)
the AfterStep application "dock" module
Wharf(1x)
AfterStep module for launching or docking applications aka button bar
WharfFolders(1x)
AfterStep wharf module
WildMidi_GetError(3)
Return the last error message
WildMidi_MasterVolume(3)
sets the overall audio level of the library
WinCommand(1x)
AfterStep module for choosing and manipulating windows based on patterns
WinList(1x)
AfterStep module displaying list of opened windows
WinTabs(1x)
AfterStep module for arranging windows using tabs
WordType(3)
defines a word in term of allowed characters, length etc
X509_STORE_get0_param(3), X509_STORE_set1_param(3), X509_STORE_get0_objects(3)
X509_STORE setter and getter functions
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_set1_ip_asc(3)
X509 verification parameters
X509_get0_notBefore(3), X509_getm_notBefore(3), X509_get0_notAfter(3), X509_getm_notAfter(3), X509_set1_notBefore(3), X509_set1_notAfter(3), X509_CRL_get0_lastUpdate(3), X509_CRL_get0_nextUpdate(3), X509_CRL_set1_lastUpdate(3), X509_CRL_set1_nextUpdate(3)
get or set certificate or CRL dates
XAddConnectionWatch(3), XRemoveConnectionWatch(3), XProcessInternalConnection(3), XInternalConnectionNumbers(3)
handle Xlib internal connections
XAddHost(3), XAddHosts(3), XListHosts(3), XRemoveHost(3), XRemoveHosts(3), XSetAccessControl(3), XEnableAccessControl(3), XDisableAccessControl(3), XHostAddress(3), XServerInterpretedAddress(3)
control host access and host control structure
XChangePointerControl(3), XGetPointerControl(3)
control pointer
XChangePointerDevice(3)
change which device is the X pointer
XCirculateRequestEvent(3)
CirculateRequest event structure
XCreateFontSet(3), XFreeFontSet(3)
create and free an international text drawing font set
XCreateRegion(3), XSetRegion(3), XDestroyRegion(3)
create or destroy regions
XCrossingEvent(3)
EnterNotify and LeaveNotify event structure
XDrawString(3), XDrawString16(3)
draw text characters
XEmptyRegion(3), XEqualRegion(3), XPointInRegion(3), XRectInRegion(3)
determine if regions are empty or equal
XFilterEvent(3)
filter X events for an input method
XGrabButton(3), XUngrabButton(3)
grab pointer buttons
XGrabPointer(3), XUngrabPointer(3), XChangeActivePointerGrab(3)
grab the pointer
XIBarrierReleasePointer(3), XIBarrierReleasePointers(3)
allow pointer movement across a pointer barrier
XIGrabEnter(3), XIUngrabEnter(3), XIGrabFocusIn(3), XIUngrabFocusIn(3)
grab/ungrab enter or focus in events
XIQueryPointer(3)
get device pointer coordinates
XISetClientPointer(3), XIGetClientPointer(3)
set or get the ClientPointer device
XIWarpPointer(3)
move a devices pointer
XInternAtom(3), XInternAtoms(3), XGetAtomName(3), XGetAtomNames(3)
create or return atom names
XIntersectRegion(3), XUnionRegion(3), XUnionRectWithRegion(3), XSubtractRegion(3), XXorRegion(3), XOffsetRegion(3), XShrinkRegion(3)
region arithmetic
XKanjiControl(3), UILib(3)
intro User interface library intro
XOpenIM(3), XCloseIM(3), XSetIMValues(3), XGetIMValues(3), XDisplayOfIM(3), XLocaleOfIM(3), XRegisterIMInstantiateCallback(3), XUnregisterIMInstantiateCallback(3)
open, close, and obtain input method information
XQueryBestSize(3), XQueryBestTile(3), XQueryBestStipple(3)
determine efficient sizes
XQueryPointer(3)
get pointer coordinates
XSendEvent(3), XDisplayMotionBufferSize(3), XGetMotionEvents(3), XTimeCoord(3)
send events and pointer motion history structure
XSetErrorHandler(3), XGetErrorText(3), XDisplayName(3), XSetIOErrorHandler(3), XGetErrorDatabaseText(3)
default error handlers
XSetPointerMapping(3), XGetPointerMapping(3)
manipulate pointer settings
XSupportsLocale(3), XSetLocaleModifiers(3)
determine locale support and configure locale modifiers
XSynchronize(3), XSetAfterFunction(3)
enable or disable synchronization
XWarpPointer(3)
move pointer
Xevie(3)
X Event Interception Extension (XEvIE)
Xft(3)
X FreeType interface library
XkbAddSymInterpret(3)
Add a symbol interpretation to the list of symbol interpretations in an XkbCompatRec
XkbComputeRowBounds(3)
Update the bounding box of a row
XkbComputeShapeTop(3)
Determines the bounding box of the top surface of a shape
XkbFindOverlayForKey(3)
Find the alternate name by using the primary name for a key that is part of an overlay
XkbGetDetectableAutoRepeat(3)
Determines whether or not the server supports DetectableAutoRepeat
XkbGetDeviceInfo(3)
Determine whether the X server allows Xkb access to particular capabilities of input devices other than the core X keyboard, or to determine the status of indicator maps, indicator names or button actions on a non-KeyClass extension device
XkbGetXlibControls(3)
Determines the current state of the Library Controls
XkbKeyActionEntry(3)
Returns a pointer to the key action corresponding to group grp and shift level lvl from the two-dimensional table of key actions associated with the key corresponding to keycode
XkbKeyActionsPtr(3)
Returns a pointer to the two-dimensional array of key actions associated with the key corresponding to keycode
XkbKeyHasActions(3)
Determines if the key corresponding to keycode has any actions associated with it
XkbKeySymsPtr(3)
Returns the pointer to the two-dimensional array of keysyms for the key corresponding to keycode
XkbKeyType(3)
Obtain the index of a key type or the pointer to a key type
XkbKeyTypeIndex(3)
Obtain the index of a key type or the pointer to a key type
XkbKeyTypesForCoreSymbols(3)
Determine the Xkb key types appropriate for the symbols bound to a key in a core keyboard mapping
XkbLibraryVersion(3)
Determines the compatibility of a library at runtime
XkbQueryExtension(3)
Determines the compatibility of a library at runtime
XkbRefreshKeyboardMapping(3)
Update the keyboard description that is internal to the X library
XkbSetDeviceInfo(3)
Modify some or all of the characteristics of an X Input Extension device
XkbSetServerInternalMods(3)
Sets the modifiers that are consumed by the server before events are delivered to the client
XkbVirtualModsToReal(3)
Determines the mapping of virtual modifiers to core X protocol modifiers
XmActivateWMProtocol(3)
A VendorShell convenience interface that activates a protocol "XmActivateWMProtocol" "VendorShell functions" "XmActivateWMProtocol" "protocols"
XmAddProtocols(3)
A VendorShell function that adds the protocols to the protocol manager and allocates the internal tables "XmAddProtocols" "VendorShell functions" "XmAddProtocols" "protocols"
XmAddWMProtocolCallback(3)
A VendorShell convenience interface that adds client callbacks for a protocol "XmAddWMProtocol\%Callback" "VendorShell functions" "XmAddWMProtocol\%Callback" "protocols"
XmAddWMProtocols(3)
A VendorShell convenience interface that adds the protocols to the protocol manager and allocates the internal tables "XmAddWMProtocol\%s" "VendorShell functions" "XmAddWMProtocol\%s" "protocols"
XmClipboardCopy(3)
A clipboard function that copies a data item to temporary storage for later copying to clipboard "XmClipboardCopy" "clipboard functions" "XmClipboardCopy"
XmClipboardRegisterFormat(3)
A clipboard function that registers a new format "XmClipboardRegisterFormat" "clipboard functions" "XmClipboardRegisterFormat"
XmCreateRadioBox(3)
A RowColumn widget convenience creation function "XmCreateRadioBox" "creation functions" "XmCreateRadioBox"
XmCreateRowColumn(3)
The RowColumn widget creation function "XmCreateRowColumn" "creation functions" "XmCreateRowColumn"
XmDataFieldGetStringWcs(3)
A DataField function that retrieves a copy of the wide character string value of a DataField widget "XmDataFieldGetStringWcs" "DataField functions" "XmDataFieldGetStringWcs"
XmDataFieldXYToPos(3)
A DataField function that accesses the character position nearest an x and y position "XmDataFieldXYToPos" "DataField functions" "XmDataFieldXYToPos"
XmDeactivateWMProtocol(3)
A VendorShell convenience interface that deactivates a protocol without removing it "protocols" "XmDeactivateWMProtocol" "VendorShell functions" "XmDeactivateWMProtocol"
XmDragCancel(3)
A Drag and Drop function that terminates a drag transaction "XmDragCancel" "Drag and Drop functions" "XmDragCancel"
XmDropSiteConfigureStackingOrder(3)
A Drag and Drop function that reorders a stack of widgets that are registered drop sites "XmDropSiteConfigureStack\%ingOrder" "Drag and Drop functions" "XmDropSiteConfigureStack\%ingOrder"
XmDropSiteRegister(3)
A Drag and Drop function that identifies a drop site and assigns resources that specify its behavior "XmDropSiteRegister" "Drag and Drop functions" "XmDropSiteRegister" "register functions" "XmDropSiteRegister"
XmDropSiteRegistered(3)
A Drag and Drop function that determines if a drop site has been registered "XmDropSiteRegistered" "Drag and Drop functions" "XmDropSiteRegistered" "register functions" "XmDropSiteRegistered"
XmDropSiteRetrieve(3)
A Drag and Drop function that retrieves resource values set on a drop site "XmDropSiteRetrieve" "Drag and Drop functions" "XmDropSiteRetrieve"
XmDropSiteUnregister(3)
A Drag and Drop function that frees drop site information "XmDropSiteUnregister" "Drag and Drop functions" "XmDropSiteUnregister"
XmDropTransferAdd(3)
A Drag and Drop function that enables additional drop transfer entries to be processed after initiating a drop transfer "XmDropTransferAdd" "Drag and Drop functions" "XmDropTransferAdd"
XmExt18List(3), The(3)
Internationalized Extended List widget
XmFontListGetNextFont(3)
A font list function that allows applications to access the fonts and character sets in a font list "XmFontListGetNextFont" "font list functions" "XmFontListGetNextFont"
XmGetVisibility(3)
A function that determines if a widget is visible "XmGetVisibility"
XmGrabShell(3)
Motif-compatible popup shell widget which grabs the keyboard and pointer
XmIconBoxIsCellEmpty(3)
A function that determines whether a cell in the IconBox is empty "XmIconBoxIsCellEmpty" "IconBox functions" "XmIconBoxIsCellEmpty"
XmImFreeXIC(3)
An input manager function that unregisters widgets for an XIC "XmImFreeXIC" "input manager functions" "XmImFreeXIC"
XmImRegister(3)
An input manager function that registers a widget with an input manager "XmImRegister" "input manager functions" "XmImRegister"
XmImSetXIC(3)
An input manager function that registers an existing XIC with a widget "XmImSetXIC" "input manager functions" "XmImSetXIC"
XmImUnregister(3)
An input manager function that removes a widget from association with its input manager "XmImUnregister" "input manager functions" "XmImUnregister"
XmInternAtom(3)
A macro that returns an atom for a given name "XmInternAtom" "atoms"
XmIsMotifWMRunning(3)
A function that determines whether the window manager is running "XmIsMotifWMRunning"
XmListPosSelected(3)
A List function that determines if the list item at a specified position is selected "XmListPosSelected" "List functions" "XmListPosSelected"
XmObjectAtPoint(3)
A toolkit function that determines which child intersects or comes closest to a specified point "XmObjectAtPoint"
XmProcessTraversal(3)
A function that determines which component receives keyboard events when a widget has the focus "XmProcessTraversal"
XmProtocol(3), XmProtocolClass(3)
internal Lesstif class
XmRegisterSegmentEncoding(3)
A compound string function that registers a compound text encoding format for a specified font list element tag "XmRegisterSegment\%Encoding" "compound string functions" "XmRegisterSegment\%Encoding"
XmRemoveProtocolCallback(3)
A VendorShell function that removes a callback from the internal list "XmRemoveProtocol\%Callback" "VendorShell functions" "XmRemoveProtocol\%Callback" "protocols"
XmRemoveProtocols(3)
A VendorShell function that removes the protocols from the protocol manager and deallocates the internal tables "XmRemoveProtocols" "VendorShell functions" "XmRemoveProtocols" "protocols"
XmRemoveWMProtocolCallback(3)
A VendorShell convenience interface that removes a callback from the internal list "XmRemoveWMProtocol\%Callback" "VendorShell functions" "XmRemoveWMProtocol\%Callback" "protocols"
XmRemoveWMProtocols(3)
A VendorShell convenience interface that removes the protocols from the protocol manager and deallocates the internal tables "XmRemoveWMProtocols" "VendorShell functions" "XmRemoveWMProtocols" "protocols"
XmRepTypeAddReverse(3)
A representation type manager function that installs the reverse converter for a previously registered representation type "XmRepTypeAddReverse" "representation type manager functions" "XmRepTypeAddReverse"
XmRepTypeGetRegistered(3)
A representation type manager function that returns a copy of the registration list "XmRepTypeGetRegistered" "representation type manager functions" "XmRepTypeGetRegistered"
XmRepTypeInstallTearOffModelConverter(3)
A representation type manager function that installs the resource converter for XmNtearOffModel. "XmRepTypeInstallTearOff\%ModelConverter" "representation type manager functions" "XmRepTypeInstallTearOff\%ModelConverter"
XmRepTypeRegister(3)
A representation type manager function that registers a representation type resource "XmRepTypeRegister" "representation type manager functions" "XmRepTypeRegister"
XmSash(3)
internall Lesstif class
XmSetWMProtocolHooks(3)
A VendorShell convenience interface that allows preactions and postactions to be executed when a protocol message is received from the window manager "XmSetWMProtocolHooks" "VendorShell functions" "XmSetWMProtocolHooks" "protocols"
XmStringBaseline(3)
A compound string function that returns the number of pixels between the top of the character box and the baseline of the first line of text "XmStringBaseline" "compound string functions" "XmStringBaseline"
XmStringExtent(3)
A compound string function that determines the size of the smallest rectangle that will enclose the compound string "XmStringExtent" "compound string functions" "XmStringExtent"
XmStringParseText(3)
A function that converts a character string to a compound string "XmStringParseText" "compound string functions" "XmStringParseText"
XmTextFieldGetLastPosition(3)
A TextField function that accesses the position of the last text character "XmTextFieldGetLastPosition" "TextField functions" "XmTextFieldGetLastPosition"
XmTextFieldGetMaxLength(3)
A TextField function that accesses the value of the current maximum allowable length of a text string entered from the keyboard "XmTextFieldGetMaxLength" "TextField functions" "XmTextFieldGetMaxLength"
XmTextFieldGetSelectionWcs(3)
A TextField function that retrieves the value of a wide character encoded primary selection "XmTextFieldGetSelection\%Wcs" "TextField functions" "XmTextFieldGetSelection\%Wcs"
XmTextFieldGetStringWcs(3)
A TextField function that retrieves a copy of the wide character string value of a TextField widget "XmTextFieldGetStringWcs" "TextField functions" "XmTextFieldGetStringWcs"
XmTextFieldGetSubstring(3)
A TextField function that retrieves a copy of a portion of the internal text buffer "XmTextFieldGetSubstring" "TextField functions" "XmTextFieldGetSubstring"
XmTextFieldGetSubstringWcs(3)
A TextField function that retrieves a portion of a wide character internal text buffer "XmTextFieldGetSubstring\%Wcs" "TextField functions" "XmTextFieldGetSubstring\%Wcs"
XmTextFieldInsert(3)
A TextField function that inserts a character string into a text string "XmTextFieldInsert" "TextField functions" "XmTextFieldInsert"
XmTextFieldInsertWcs(3)
A TextField function that inserts a wide character string into a TextField widget "XmTextFieldInsertWcs" "TextField functions" "XmTextFieldInsertWcs"
XmTextFieldPosToXY(3)
A TextField function that accesses the x and y position of a character position "XmTextFieldPosToXY" "TextField functions" "XmTextFieldPosToXY"
XmTextFieldReplaceWcs(3)
A TextField function that replaces part of a wide character string in a TextField widget "XmTextFieldReplaceWcs" "TextField functions" "XmTextFieldReplaceWcs"
XmTextFieldSetMaxLength(3)
A TextField function that sets the value of the current maximum allowable length of a text string entered from the keyboard "XmTextFieldSetMaxLength" "TextField functions" "XmTextFieldSetMaxLength"
XmTextFieldSetStringWcs(3)
A TextField function that sets a wide character string value "XmTextFieldSetStringWcs" "TextField functions" "XmTextFieldSetStringWcs"
XmTextFieldXYToPos(3)
A TextField function that accesses the character position nearest an x and y position "XmTextFieldXYToPos" "TextField functions" "XmTextFieldXYToPos"
XmTextFindStringWcs(3)
A Text function that finds the beginning position of a wide character text string "XmTextFindStringWcs" "Text functions" "XmTextFindStringWcs"
XmTextGetCenterline(3)
Return the height (length) of a character string when the writing direction is vertical
XmTextGetMaxLength(3)
A Text function that accesses the value of the current maximum allowable length of a text string entered from the keyboard "XmTextGetMaxLength" "Text functions" "XmTextGetMaxLength"
XmTextGetSelectionWcs(3)
A Text function that retrieves the value of a wide character encoded primary selection "XmTextGetSelectionWcs" "Text functions" "XmTextGetSelectionWcs"
XmTextGetStringWcs(3)
A Text function that retrieves a copy of the wide character string value of a Text widget "XmTextGetStringWcs" "Text functions" "XmTextGetStringWcs"
XmTextGetSubstring(3)
A Text function that retrieves a copy of a portion of the internal text buffer "XmTextGetSubstring" "Text functions" "XmTextGetSubstring"
XmTextGetSubstringWcs(3)
A Text function that retrieves a portion of a wide character internal text buffer "XmTextGetSubstringWcs" "Text functions" "XmTextGetSubstringWcs"
XmTextGetTopCharacter(3)
A Text function that accesses the position of the first character displayed "XmTextGetTopCharacter" "Text functions" "XmTextGetTopCharacter"
XmTextInsert(3)
A Text function that inserts a character string into a text string "XmTextInsert" "Text functions" "XmTextInsert"
XmTextInsertWcs(3)
A Text function that inserts a wide character string into a Text widget "XmTextInsertWcs" "Text functions" "XmTextInsertWcs"
XmTextPosToXY(3)
A Text function that accesses the x and y position of a character position "XmTextPosToXY" "Text functions" "XmTextPosToXY"
XmTextPosition(3)
Data type for a character position within a text string "XmTextPosition" "data types" "XmTextPosition"
XmTextReplaceWcs(3)
A Text function that replaces part of a wide character string in a Text widget "XmTextReplaceWcs" "Text functions" "XmTextReplaceWcs"
XmTextSetMaxLength(3)
A Text function that sets the value of the current maximum allowable length of a text string entered from the keyboard "XmTextSetMaxLength" "Text functions" "XmTextSetMaxLength"
XmTextSetStringWcs(3)
A Text function that sets a wide character string value "XmTextSetStringWcs" "Text functions" "XmTextSetStringWcs"
XmTextSetTopCharacter(3)
A Text function that sets the position of the first character displayed "XmTextSetTopCharacter" "Text functions" "XmTextSetTopCharacter"
XmTextXYToPos(3)
A Text function that accesses the character position nearest an x and y position "XmTextXYToPos" "Text functions" "XmTextXYToPos"
XmTrackingEvent(3)
A Toolkit function that provides a modal interaction "XmTrackingEvent" "Toolkit functions" "XmTrackingEvent"
XmTrackingLocate(3)
A Toolkit function that provides a modal interaction "XmTrackingLocate" "Toolkit functions" "XmTrackingLocate"
XmTransferSetParameters(3)
A toolkit function that establishes parameters to be passed by the next call to XmTransferValue "XmTransferSetParameters" "toolkit functions" "XmTransferSetParameters"
XmVaCreateRowColumn(3)
XmVaCreateManagedRowColumn A RowColumn widget convenience creation functions. "XmVaCreateToggleRowColumn" "XmVaCreateManagedRowColumn" "creation functions" "XmVaCreateRowColumn"
XmWorld(3), XmWorldClass(3)
Lesstif internal widget class XmWorldClass
XmbTextPerCharExtents(3), XwcTextPerCharExtents(3), Xutf8TextPerCharExtents(3)
obtain per-character information for a text string
XmbufQueryExtension(3), XmbufGetVersion(3), XmbufCreateBuffers(3), XmbufDestroyBuffers(3), XmbufDisplayBuffers(3), XmbufGetWindowAttributes(3), XmbufChangeWindowAttributes(3), XmbufGetBufferAttributes(3), XmbufChangeBufferAttributes(3), XmbufGetScreenInfo(3), XmbufCreateStereoWindow(3)
X multibuffering functions
XmtAddDeleteCallback(3), XmtAddDeleteCallback()(3), XmtAddSaveYourselfCallback()(3)
register callbacks for session management protocols
XmtCli(3)
a Command Line Interface widget
XmtConvertStringToBitmap(3), XmtConvertStringTo<Type>(3)
``new style'' Xt resource converters for various types
XmtDialogPosition(3), XmtDialogPosition()(3)
center a dialog box over a widget
XmtErrorMsg(3), XmtErrorMsg()(3), XmtWarningMsg()(3)
print an error message and exit or print a warning message and return
XmtFocusShell(3), XmtFocusShell()(3), XmtMoveShellToPointer()(3), XmtWarpToShell()(3), XmtSetFocusToShell()(3)
change keyboard focus to a shell widget
XmtMenuPopupHandler(3), XmtMenuPopupHandler()(3)
remove the default event handler registered for an XmtMenu popup menu pane
XmtParseXpmData(3), XmtParseXpmData()(3), XmtParseXpmFile()(3), XmtFreeXmtImage()(3)
parse an XPM pixmap into the intermediate XmtImage format
XmtPatchVisualInheritance(3), XmtPatchVisualInheritance()(3)
apply a runtime patch to the Shell widget class so that it handles non-default visuals better
XmtRegisterAll(3), XmtRegisterAll()(3)
register all standard widgets, procedures, and resource converters
XmtRegisterBitmapConverter(3), XmtRegister<Type>Converter(3)
register resource converters for various types
XmtRegisterChooser(3), XmtRegisterChooser()(3), XmtRegisterInputField()(3), XmtRegisterXmScale()(3), XmtRegisterXmScrolledText()(3), XmtRegisterXmText()(3), XmtRegisterXmTextField()(3), XmtRegisterXmToggleButton()(3)
specially register input widgets for use with Xmt automatic dialog facilities
XmtRegisterColor(3), XmtRegisterColor()(3), XmtVaRegisterColors()(3), XmtRegisterColors()(3), XmtRegisterPixel()(3), XmtRegisterStandardColors()(3)
define symbolic color names in a color table
XmtRegisterEnumConverter(3), XmtRegisterEnumConverter()(3), XmtConvertStringToEnum()(3)
a resource converter for enumerated types
XmtRegisterImage(3), XmtRegisterImage()(3), XmtRegisterXbmData()(3)
register pixmap and bitmap data in the Xmt pixmap cache
XmtRegisterImprovedIcons(3), XmtRegisterImprovedIcons()(3)
replace the standard error, warning and information icons with larger ``improved'' icons
XmtRegisterLayoutParser(3), XmtRegisterLayoutParser()(3), XmtRegisterLayoutCreateMethod()(3)
register the parser for the XmtLayout widget layout grammar and allow typed widget creation by the parser
XmtRegisterMotifWidgets(3), XmtRegisterMotifWidgets()(3), XmtRegisterXmtWidgets()(3)
register the standard Motif and Xmt widget constructors for use with the automatic widget creation facilities
XmtRegisterProcedures(3), XmtRegisterProcedures()(3), XmtRegisterCallbackProcedure()(3), XmtVaRegisterCallbackProcedures()(3)
register procedures for use with the Xmt callback converter
XmtRegisterStyle(3), XmtRegisterStyle()(3), XmtRegisterTemplate()(3), XmtLookupStyle()(3), XmtLookupTemplate()(3), XmtTemplateInstantiate()(3)
handle styles and templates
XmtRegisterUnixProcedures(3), XmtRegisterXtProcedures()(3), XmtRegisterXmtProcedures()(3), XmtRegisterUnixProcedures()(3)
register commonly used procedures with the Xmt callback converter
XmtRegisterWidgetClass(3), XmtRegisterWidgetClass()(3), XmtRegisterWidgetConstructor()(3), XmtVaRegisterWidgetClasses()(3), XmtVaRegisterWidgetConstructors()(3), XmtRegisterPopupClass()(3), XmtRegisterPopupConstructor()(3)
register names for widget types
XmtRegisterWidgetTypes(3), XmtRegisterWidgetTypes()(3)
register names for widget types
XmtVaRegisterSymbols(3), XmtVaRegisterSymbols()(3), XmtLookupSymbol()(3)
register a name for application variables, and lookup variables by name
XpFreePrinterList(3)
Frees a list of printer records
XpGetLocaleHinter(3)
Gets a pointer to and description of the current "locale hinter" function
XpGetPageDimensions(3)
Gets the page dimensions for the current printer settings
XpGetPdmStartParams(3)
Builds up parameters in accordance with the PDM Selection Protocol as a standard convenience function
XpGetPrinterList(3)
Retrieves a list of all printers supported on an X Print Server
XpGetScreenOfContext(3)
Obtains a pointer to the screen associated with the specified print context
XpQueryExtension(3)
Queries an X Server to determine if it supports the X Print Service Extension, and if it does, what the offsets are for associated events and errors
XpQueryScreens(3)
Queries an X Server to determine which screens, of all the screens on the server, support the X Print Service Extension
XpQueryVersion(3)
Queries an X Server to determine if it supports the X Print Service Extension, and if it does, which version of the X Print Service Extension
XpRehashPrinterList(3)
Recomputes the list of available printers
XpSelectInput(3)
Specifies which X Print events, from the specified print context, the client is interested in
XpSetLocaleHinter(3)
Sets a "locale hinter" function and description of it
XtAddActions(3)
register an action table
XtAddInput(3), XtAddTimeOut(3), XtAddWorkProc(3)
register input, timeout, and workprocs
XtAppAddActionHook(3), XtRemoveActionHook(3)
register an action hook procedure
XtAppAddActions(3)
register an action table
XtAppAddBlockHook(3), XtRemoveBlockHook(3)
register a block hook procedure
XtAppAddConverter(3), XtAddConverter(3)
register resource converter
XtAppAddInput(3), XtRemoveInput(3)
register and remove an input source
XtAppAddSignal(3), XtRemoveSignal(3), XtNoticeSignal(3)
register and remove a signal source
XtAppAddTimeOut(3), XtRemoveTimeOut(3)
register and remove timeouts
XtAppError(3), XtAppSetErrorHandler(3), XtAppSetWarningHandler(3), XtAppWarning(3)
low-level error handlers
XtAppErrorMsg(3), XtAppSetErrorMsgHandler(3), XtAppSetWarningMsgHandler(3), XtAppWarningMsg(3)
high-level error handlers
XtAppGetErrorDatabase(3), XtAppGetErrorDatabaseText(3)
obtain error database
XtAppSetTypeConverter(3), XtSetTypeConverter(3)
register resource converter
XtConvert(3), XtDirectConvert(3)
invoke resource converters
XtConvertAndStore(3), XtCallConverter(3)
invoke resource converters
XtError(3), XtSetErrorHandler(3), XtSetWarningHandler(3), XtWarning(3)
low-level error handlers
XtErrorMsg(3), XtSetErrorMsgHandler(3), XtWarningMsg(3), XtSetWarningMsgHandler(3)
high-level error handlers
XtGetErrorDatabase(3), XtGetErrorDatabaseText(3)
obtain error database
XtGetSelectionParameters(3)
retrieve target parameters for a selection request with a single target
XtGrabKey(3), XtUngrabKey(3), XtGrabKeyboard(3), XtUngrabKeyboard(3), XtGrabButton(3), XtUngrabButton(3), XtGrabPointer(3), XtUngrabPointer(3)
manage grabs
XtHooksOfDisplay(3)
external agent access points
XtInsertEventTypeHandler(3), XtRemoveEventTypeHandler(3), XtRegisterExtensionSelector(3), XtSetEventDispatcher(3), XtDispatchEventToWidget(3)
extension event handling
XtOffset(3), XtOffsetOf(3), XtNumber(3)
determine the byte offset or number of array elements
XtRegisterDrawable(3)
register a drawable with the Intrinsics event dispatcher
XtRegisterGrabAction(3)
register button and key grabs
XtSetKeyTranslator(3), XtTranslateKeycode(3), XtRegisterCaseConverter(3), XtConvertCase(3)
convert KeySym to KeyCodes
XtSetSelectionParameters(3)
specify target parameters for a selection request with a single target
XvQueryBestSize(3)
determine the optimum drawable region size
_U_dyn_register(3)
-- register unwind-info for dynamically generated code
__iconv_get_list(3), __iconv_free_list(3)
retrieving a list of character encodings supported by iconv(3)
_exit(2)
terminate the calling process
_getpixel(3), _getpixel15(3), _getpixel16(3), _getpixel24(3), _getpixel32(3)
Faster specific version of getpixel(). Allegro game programming library
_putpixel(3), _putpixel15(3), _putpixel16(3), _putpixel24(3), _putpixel32(3)
Faster specific version of putpixel(). Allegro game programming library
_secure_path(3)
determine if a file appears to be secure
_umtx_op(2)
interface for implementation of userspace threading synchronization primitives
a2ps(1)
format files for printing on a PostScript printer
a68g(1), - a68g(1)
Algol 68 Genie, an Algol 68 compiler-interpreter
aa_attrs(3)
returns pointer to the text output buffer used by AA-lib
aa_createedit(3)
Simple interactive line editor provided as helper function
aa_defparams(3)
default hardware paramters requested by AA-lib programs
aa_defrenderparams(3)
default rendering parameters
aa_drivers(3)
NULL-terminated array of output drivers available in AA-lib
aa_edit(3)
Simple interactive line editor
aa_fonts(3)
Null-terminated array of available fonts
aa_formats(3)
NULL terminated array of save formats supported by AA-lib
aa_image(3)
returns pointer to the framebuffer emulated by AA-lib
aa_kbddrivers(3)
NULL-terminated array of keyboard drivers available in AA_lib
aa_mmheight(3)
returns height of the output screen in millimeters
aa_mmwidth(3)
returns width of the output screen in millimeters
aa_mousedrivers(3)
NULL terminated array of mouse drivers supported by AA-lib
aa_registerfont(3)
add new font specification to aa_fonts array
aa_scrheight(3)
returns height of the output screen in characters
aa_scrwidth(3)
returns width of the output screen in characters
aa_setsupported(3)
alter the "supported" field of hardware_params structure used by AA-lib
aa_text(3)
returns pointer to the text output buffer used by AA-lib
abc2abc(1)
a simple abc checker/re-formatter/transposer
abduco(1)
terminal session manager
abort(3)
cause abnormal program termination
abstractile(6)
draw abstract mosaic patterns of interlocking tiles
accel(6)
tests the new style svgalib accelerator interface
accept_filter(9), accept_filt_add(9), accept_filt_del(9), accept_filt_generic_mod_event(9), accept_filt_get(9)
filter incoming connections
accerciser(1), ACCERCISER(1)
an interactive accessibility explorer
acl_is_trivial_np(3)
determine whether ACL is trivial
acpi_toshiba(4)
Toshiba HCI interface
activateCDKGraph(3), activateCDKGraph destroyCDKGraph drawCDKGraph eraseCDKGraph getCDKGraphBox getCDKGraphCharacter getCDKGraphCharacters getCDKGraphDisplayType getCDKGraphValue getCDKGraphValues moveCDKGraph newCDKGraph positionCDKGraph setCDKGraph setCDKGraphBackgroundAttrib setCDKGraphBackgroundColor setCDKGraphBox setCDKGraphBoxAttribute setCDKGraphCharacter setCDKGraphCharacters setCDKGraphDisplayType setCDKGraphHorizontalChar setCDKGraphLLChar setCDKGraphLRChar setCDKGraphULChar setCDKGraphURChar setCDKGraphValue setCDKGraphValues setCDKGraphVerticalChar cdk_graph(3)
curses graph widget
activateCDKRadio(3), activateCDKRadio destroyCDKRadio drawCDKRadio eraseCDKRadio getCDKRadioBox getCDKRadioChoiceCharacter getCDKRadioCurrentItem getCDKRadioHighlight getCDKRadioItems getCDKRadioLeftBrace getCDKRadioRightBrace getCDKRadioSelectedItem injectCDKRadio moveCDKRadio newCDKRadio positionCDKRadio setCDKRadio setCDKRadioBackgroundAttrib setCDKRadioBackgroundColor setCDKRadioBox setCDKRadioBoxAttribute setCDKRadioChoiceCharacter setCDKRadioCurrentItem setCDKRadioHighlight setCDKRadioHorizontalChar setCDKRadioItems setCDKRadioLLChar setCDKRadioLRChar setCDKRadioLeftBrace setCDKRadioPostProcess setCDKRadioPreProcess setCDKRadioRightBrace setCDKRadioSelectedItem setCDKRadioULChar setCDKRadioURChar setCDKRadioVerticalChar cdk_radio(3)
curses radio list widget
active_dialog(3)
Global pointer to the most recent activated dialog. Allegro game programming library
active_menu(3)
Global pointer to the most recent activated menu. Allegro game programming library
add_clip_rect(3)
Intersects a bitmap's clipping rectangle with the given area. Allegro game programming library
add_wch(3), wadd_wch(3), mvadd_wch(3), mvwadd_wch(3), echo_wchar(3), wecho_wchar(3)
add a complex character and rendition to a curses window, then advance the cursor
add_wch(3x), wadd_wch(3x), mvadd_wch(3x), mvwadd_wch(3x), echo_wchar(3x), wecho_wchar(3x)
add a complex character and rendition to a curses window, then advance the cursor
add_wchstr(3), add_wchnstr(3), wadd_wchstr(3), wadd_wchnstr(3), mvadd_wchstr(3), mvadd_wchnstr(3), mvwadd_wchstr(3), mvwadd_wchnstr(3)
add an array of complex characters (and attributes) to a curses window
add_wchstr(3x), add_wchnstr(3x), wadd_wchstr(3x), wadd_wchnstr(3x), mvadd_wchstr(3x), mvadd_wchnstr(3x), mvwadd_wchstr(3x), mvwadd_wchnstr(3x)
add an array of complex characters (and attributes) to a curses window
addbddvarafter(3)
adds a new variable, after an existing one. man1/alc_origin.1
addbddvarlast(3)
adds a new variable, after all others. man1/alc_origin.1
addch(3), waddch(3), mvaddch(3), mvwaddch(3), echochar(3), wechochar(3)
add a character (with attributes) to a curses window, then advance the cursor
addch(3x), waddch(3x), mvaddch(3x), mvwaddch(3x), echochar(3x), wechochar(3x)
add a character (with attributes) to a curses window, then advance the cursor
addchstr(3), addchnstr(3), waddchstr(3), waddchnstr(3), mvaddchstr(3), mvaddchnstr(3), mvwaddchstr(3), mvwaddchnstr(3)
add a string of characters (and attributes) to a curses window
addchstr(3x), addchnstr(3x), waddchstr(3x), waddchnstr(3x), mvaddchstr(3x), mvaddchnstr(3x), mvwaddchstr(3x), mvwaddchnstr(3x)
add a string of characters (and attributes) to a curses window
addrtype(3)
Labeling IPv4 addresses as internal or external
addstr(3), addnstr(3), waddstr(3), waddnstr(3), mvaddstr(3), mvaddnstr(3), mvwaddstr(3), mvwaddnstr(3)
add a string of characters to a curses window and advance cursor
addstr(3x), addnstr(3x), waddstr(3x), waddnstr(3x), mvaddstr(3x), mvaddnstr(3x), mvwaddstr(3x), mvwaddnstr(3x)
add a string of characters to a curses window and advance cursor
addwstr(3), addnwstr(3), waddwstr(3), waddnwstr(3), mvaddwstr(3), mvaddnwstr(3), mvwaddwstr(3), mvwaddnwstr(3)
add a string of wide characters to a curses window and advance cursor
addwstr(3x), addnwstr(3x), waddwstr(3x), waddnwstr(3x), mvaddwstr(3x), mvaddnwstr(3x), mvwaddwstr(3x), mvwaddnwstr(3x)
add a string of wide characters to a curses window and advance cursor
adie-17(1), Adie(1)
The ADvanced Interactive Editor
adinrec(1)
record audio device and save one utterance to a file
adjust_sample(3)
Alters the parameters of a sample while it is playing. Allegro game programming library
adv(4)
Advansys ISA/VL/PCI Narrow 8bit SCSI Host adapter driver
advj(1)
AdvanceMAME Joystick Tester
advk(1)
AdvanceMAME Keyboard Tester
advm(1)
AdvanceMAME Mouse Tester
advs(1)
AdvanceMAME Sound Tester
adw(4)
Advansys PCI 16bit SCSI Host adapter driver
aegis.cgi(1)
Aegis web interface script
aegrep(1)
print lines matching a pattern
ael(1), aegis list(1)
list (possibly) interesting things
afQuery(3), afQueryLong(3), afQueryDouble(3), afQueryPointer(3)
query the capabilities of the Audio File Library
afSetErrorHandler(3)
install a custom error handling routine
afpd.conf(5)
Configuration file used by afpd(8) to determine the setup of its file sharing services
afpldaptest(1)
Syntactically check ldap parameters in afp.conf
afternoonstalker(6)
A robot-killing game
afterstep(1)
X11 window manager
afterstep_faq(1x)
This document is an ever growing set of questions, statements, ideas and complaints about AfterStep version 2.0
ag(1)
The Silver Searcher. Like ack, but faster
agentxtrap(1)
send an AgentX NotifyPDU to an AgentX master agent
aggregate(1)
optimise a list of route prefixes to help make nice short filters
aggregate-ios(1)
optimise a concatenated set of cisco/IOS prefix filters to help make them nice and short
agp(4)
generic interface to the Accelerated Graphics Port (AGP)
ah-tty(1)
A Helpful Terminal
aha(4)
Adaptec SCSI host adapter driver
ahb(4)
Adaptec EISA SCSI host adapter driver
ahc(4)
Adaptec VL/ISA/PCI SCSI host adapter driver
ahci(4)
Serial ATA Advanced Host Controller Interface driver
ahd(4)
Adaptec PCI/PCI-X Ultra320 SCSI host adapter driver
aibs(4)
ASUSTeK AI Booster ACPI ATK0110 voltage, temperature and fan sensor
airodump-ng-oui-update(8), airodump-ng-oui-updater(8)
IEEE oui list updater for airodump-ng
airtun-ng(8)
a virtual tunnel interface creator for aircrack-ng
al_fopen_interface(3)
Allegro 5 API
al_get_fs_interface(3)
Allegro 5 API
al_get_new_display_adapter(3)
Allegro 5 API
al_get_new_file_interface(3)
Allegro 5 API
al_get_num_video_adapters(3)
Allegro 5 API
al_register_assert_handler(3)
Allegro 5 API
al_register_audio_stream_loader(3)
Allegro 5 API
al_register_audio_stream_loader_f(3)
Allegro 5 API
al_register_bitmap_loader(3)
Allegro 5 API
al_register_bitmap_loader_f(3)
Allegro 5 API
al_register_bitmap_saver(3)
Allegro 5 API
al_register_bitmap_saver_f(3)
Allegro 5 API
al_register_event_source(3)
Allegro 5 API
al_register_font_loader(3)
Allegro 5 API
al_register_sample_loader(3)
Allegro 5 API
al_register_sample_loader_f(3)
Allegro 5 API
al_register_sample_saver(3)
Allegro 5 API
al_register_sample_saver_f(3)
Allegro 5 API
al_set_fs_interface(3)
Allegro 5 API
al_set_memory_interface(3)
Allegro 5 API
al_set_new_display_adapter(3)
Allegro 5 API
al_set_new_file_interface(3)
Allegro 5 API
al_set_physfs_file_interface(3)
Allegro 5 API
al_set_standard_file_interface(3)
Allegro 5 API
al_set_standard_fs_interface(3)
Allegro 5 API
al_unregister_event_source(3)
Allegro 5 API
algotutor(1)
an interactive program for observing the intermediate steps of algorithms
aliastorle(1)
Convert Alias(tm raster files to RLE format
allcm(1)
force the most important Computer-Modern-fonts to be calculated
allegro_404_char(3)
Character used when Allegro cannot find a glyph
allegro_icon(3)
Pointer to the Allegro X11 icon
alpine(1)
an Alternatively Licensed Program for Internet News and Email
alsabat(1)
command-line sound tester for ALSA sound card driver
alsamixer(1)
soundcard mixer for ALSA soundcard driver, with ncurses interface
altera_avgen(4)
driver for generic Altera Avalon-bus-attached, memory-mapped devices
altera_jtag_uart(4)
driver for the Altera JTAG UART Core
altera_sdcard(4)
driver for the Altera University Program Secure Data Card IP Core
amadmin(8)
administrative interface to control Amanda backups
amanda-interactivity(7)
Configuring Interactivity with Amanda Amanda
amavisd-milter(8)
sendmail milter for amavisd-new
ambsdtar(8)
Amanda Application to interface with BSD Tar
amcleanup(8)
run the Amanda cleanup process after a failure
amgetconf(8)
look up configuration parameters and manipulate debug logs
amgtar(8)
Amanda Application to interface with GNU Tar
amin(1)
notify writers that you are busy
ampgsql(8)
Amanda Application to interface with PostgreSQL
amq(8)
automounter query tool
amsamba(8)
Amanda Application to interface with smbclient
amstar(8)
Amanda Application to interface with star
amsuntar(8)
Amanda Application to interface with native tar utility available on solaris platforms
amtterm(1)
Intel AMT serial-over-lan (sol) client
an(4)
Aironet Communications 4500/4800 wireless network adapter driver
and.conf(5), /etc/and.conf(5)
general configuration parameters for the auto nice daemon
annoyance-filter(1)
automatically detect junk mail
ansifilter(1), Ansifilter(1)
ANSI escape code processor and converter
ansilove(1)
ANSI / ASCII art to PNG converter
ansiweather(1)
weather in terminal, with ANSI colors and Unicode symbols
anytermd(1)
A terminal-emulating HTTP daemon
anytooff(1gv)
filter to convert a (set of) geomview data file(s) containing any geomview primitives into a single polylist
anytoucd(1gv)
filter to convert a geomview data file into a data file in the so-called 'ucd' (Unstructured Cell Data) format
aox(8)
management tool for Archiveopteryx
aoxdeliver(8)
deliver mail into Archiveopteryx
aoximport(8)
import messages into Archiveopteryx
aoxsuper.conf(5)
configuration file for Archiveopteryx
apachectl(8)
Apache HTTP Server Control Interface
apcpwr(8)
control power on/off/reboot via an APC MasterSwitch
apertium-filter-ambiguity(1)
This application is part of ( apertium ) This tool is part of the apertium open-source machine translation toolbox: http://www.apertium.org
apertium-interchunk(1)
This application is part of ( apertium ) This tool is part of the apertium machine translation architecture: http://apertium.org
apertium-validate-interchunk(1)
This application is part of ( apertium ) This tool is part of the apertium open-source machine translation toolbox: http://www.apertium.org
apgbfm(1)
APG Bloom filter management program
apic(4)
Advanced Programmable Interrupt Controller (APIC) driver
apply_quat(3)
Multiplies a point by a quaternion. Allegro game programming library
applybddnodeterm(3)
applies an operator on two bdd nodes. man1/alc_origin.1
applyfilter(8)
apply filter settings to news spool
aps2file(1)
printing to a file via apsfilter
apsfilter(1)
magic print filter with auto file type recognition
apsfilter-bug(1)
create a half-automatic bug report for apsfilter
apsfilterrc(5)
configuration file for magic print filter
apspreview(1)
preview PostScript file(s) as generated by apsfilter
archive_clear_error(3), archive_compression(3), archive_compression_name(3), archive_copy_error(3), archive_errno(3), archive_error_string(3), archive_file_count(3), archive_filter_code(3), archive_filter_count(3), archive_filter_name(3), archive_format(3), archive_format_name(3), archive_position(3), archive_set_error(3)
libarchive utility functions
archive_read_set_filter_option(3), archive_read_set_format_option(3), archive_read_set_option(3), archive_read_set_options(3)
functions controlling options for reading archives
archive_read_support_filter_all(3), archive_read_support_filter_bzip2(3), archive_read_support_filter_compress(3), archive_read_support_filter_gzip(3), archive_read_support_filter_lz4(3), archive_read_support_filter_lzma(3), archive_read_support_filter_none(3), archive_read_support_filter_rpm(3), archive_read_support_filter_uu(3), archive_read_support_filter_xz(3), archive_read_support_filter_zstd(3), archive_read_support_filter_program(3), archive_read_support_filter_program_signature(3)
functions for reading streaming archives
archive_write_add_filter_b64encode(3), archive_write_add_filter_by_name(3), archive_write_add_filter_bzip2(3), archive_write_add_filter_compress(3), archive_write_add_filter_grzip(3), archive_write_add_filter_gzip(3), archive_write_add_filter_lrzip(3), archive_write_add_filter_lz4(3), archive_write_add_filter_lzip(3), archive_write_add_filter_lzma(3), archive_write_add_filter_lzop(3), archive_write_add_filter_none(3), archive_write_add_filter_program(3), archive_write_add_filter_uuencode(3), archive_write_add_filter_xz(3), archive_write_add_filter_zstd(3)
functions enabling output filters
archive_write_set_filter_option(3), archive_write_set_format_option(3), archive_write_set_option(3), archive_write_set_options(3)
functions controlling options for writing archives
archive_write_set_format(3), archive_write_set_format_7zip(3), archive_write_set_format_ar(3), archive_write_set_format_ar_bsd(3), archive_write_set_format_ar_svr4(3), archive_write_set_format_by_name(3), archive_write_set_format_cpio(3), archive_write_set_format_cpio_newc(3), archive_write_set_format_filter_by_ext(3), archive_write_set_format_filter_by_ext_def(3), archive_write_set_format_gnutar(3), archive_write_set_format_iso9660(3), archive_write_set_format_mtree(3), archive_write_set_format_mtree_classic(3), archive_write_set_format_mtree_default(3), archive_write_set_format_pax(3), archive_write_set_format_pax_restricted(3), archive_write_set_format_raw(3), archive_write_set_format_shar(3), archive_write_set_format_shar_dump(3), archive_write_set_format_ustar(3), archive_write_set_format_v7tar(3), archive_write_set_format_warc(3), archive_write_set_format_xar(3), archive_write_set_format_zip(3)
functions for creating archives
archiveopteryx(8), Overview(8)
of Archiveopteryx
archiveopteryx.conf(5)
configuration file for Archiveopteryx
arena(1)
scripting language interpreter
arg(3bobcat), FBB::Arg(3bobcat)
A singleton class interfacing command line arguments
aribas(1)
Multiprecision Arithmetic Interpreter
arj-register(1)
Register the ARJ archiver
arjdisp(1)
ARJ simple graphical interface
arm(1)
Terminal Tor status monitor
arpdig(1)
dig an interface for arp responses
arpspoof(8)
intercept packets on a switched LAN
artsintfmagg(l)
utility to aggregate interface matrix objects in time domain
artsintfms(l)
utility to display interface matrix objects from ARTS files
asa(1)
interpret carriage-control characters
ascd(1)
An AfterStep and WindowMaker CD player
ascii(7)
octal, hexadecimal, decimal and binary ASCII character sets
asclock(1)
the AfterStep clock
ascpu(1)
the AfterStep CPU load monitor
asfsm(1)
the AfterStep file system monitor
asimagexml(1x)
XML schema to be used for scripting image manipulation by AfterStep and ascompose libAfterImage/asimagexml
askfilter(1)
Active Spam Killer
asmail(1)
the AfterStep e-mail monitor
asmem(1)
the AfterStep memory utilization monitor
asmix(1)
the AfterStep volume control knob
asmixer(1)
the AfterStep Mixer
asmping(1)
check if you can receive IPv4/IPv6 multicast data from an internet host
asn_get_header(3), asn_put_header(3), asn_put_temp_header(3), asn_commit_header(3), asn_get_integer_raw(3), asn_get_integer(3), asn_put_integer(3), asn_get_octetstring_raw(3), asn_get_octetstring(3), asn_put_octetstring(3), asn_get_null_raw(3), asn_get_null(3), asn_put_null(3), asn_put_exception(3), asn_get_objid_raw(3), asn_get_objid(3), asn_put_objid(3), asn_get_sequence(3), asn_get_ipaddress_raw(3), asn_get_ipaddress(3), asn_put_ipaddress(3), asn_get_uint32_raw(3), asn_put_uint32(3), asn_get_counter64_raw(3), asn_put_counter64(3), asn_get_timeticks(3), asn_put_timeticks(3), asn_skip(3), asn_slice_oid(3), asn_append_oid(3), asn_compare_oid(3), asn_is_suboid(3), asn_oid2str_r(3), asn_oid2str(3)
ASN.1 library for SNMP
aspell(1)
interactive spell checker
assplog(8)
ASSP log pretty-printer
asterisk(8)
All-purpose telephony server
astgenkey(8)
generates keys for for Asterisk IAX2 RSA authentication
astime(1)
the AfterStep analogue clock
astzclock(1)
the AfterStep clock
at(1), batch(1), atq(1), atrm(1)
queue, examine or delete jobs for later execution
at_quick_exit(3)
registers a cleanup function to run on quick exit
atari800(1)
emulator of Atari 8-bit computers and the 5200 console
aterm(1), aterm (Afterstep XVT)(1)
a VT102 emulator for the X window system
atexit(3)
register a function to be called on exit
atf-sh(1)
interpreter for shell-based test programs
atf-test-program(1)
common interface to ATF test programs
atkbd(4)
the AT keyboard interface
atkbdc(4)
the AT keyboard controller interface
atom(1)
ASCII-to-markup filter
atrun(8)
run jobs queued for later execution
atse(4)
driver for the Altera Triple-Speed Ethernet MegaCore
atslogd(8)
ATSlog gives the convenient interface for viewing and analysing calls of various models PBX
atslogmaster(8)
ATSlog gives the convenient interface for viewing and analysing bells of various models PBX
attimer(4)
i8254 Programmable Interval Timer (AT Timer) driver
attraction(6)
interactions of opposing forces
attrd_updater(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
attroff(3), wattroff(3), attron(3), wattron(3), attrset(3), wattrset(3), color_set(3), wcolor_set(3), standend(3), wstandend(3), standout(3), wstandout(3), attr_get(3), wattr_get(3), attr_off(3), wattr_off(3), attr_on(3), wattr_on(3), attr_set(3), wattr_set(3), chgat(3), wchgat(3), mvchgat(3), mvwchgat(3), PAIR_NUMBER(3)
curses character and window attribute control routines
attroff(3x), wattroff(3x), attron(3x), wattron(3x), attrset(3x), wattrset(3x), color_set(3x), wcolor_set(3x), standend(3x), wstandend(3x), standout(3x), wstandout(3x), attr_get(3x), wattr_get(3x), attr_off(3x), wattr_off(3x), attr_on(3x), wattr_on(3x), attr_set(3x), wattr_set(3x), chgat(3x), wchgat(3x), mvchgat(3x), mvwchgat(3x), PAIR_NUMBER(3x)
curses character and window attribute control routines
au_get_state(3), au_notify_initialize(3), au_notify_terminate(3)
audit event notification
auctl(1)
control various audio server parameters
audio2tape(1)
Sinclair ZX Spectrum audio to tape file converter
audiopreview(1)
play previews of your audio and video files, and also internet media streams
audit_control(5)
audit system parameters
auditctl(2)
configure system audit parameters
auditfilterd(8)
audit filter daemon
auditon(2)
configure system audit parameters
auscope(1)
Network Audio System Protocol Filter auscope#(1) "" "auscope(1)"
auto_master(5)
auto_master and map file format
autobench_admin(1)
admin tool for running HTTP benchmarks using a cluster of distributed autobench servers
autofs(5)
automounter filesystem
autojump(1)
a faster way to navigate your filesystem
automappingconverter(1)
a converter for old Tiled automapping rules
automounter(8)
Dynamically configure amd for existing devices
automounter.conf(5)
Define runtime parameters for automounter
automx.conf(5)
automx configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
automx_ldap(5)
automx LDAP backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
automx_script(5)
automx script backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
automx_sql(5)
automx SQL backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
autosupport(8)
interactive script to provide Digium[tm]'s support with information
autozen(1), AutoZen(1)
experience an altered state of consciousness
avahi-publish-service(1)
Register an mDNS/DNS-SD service or host name or address mapping using the Avahi daemon
avarice(1)
Provides an interface from avr-gdb to Atmel's JTAGICE box
avg4(1)
Downfilter an image by simple averaging
awesome2-client(1)
awesome2 window manager command line interface
awk(1)
pattern-directed scanning and processing language
axi(1)
afnix cross interpreter
b43-fwcutter(1)
manual page for b43-fwcutter
babel(1), obabel(1)
a converter for chemistry and molecular modeling data files
babeltrace(1)
Babeltrace Trace Viewer and Converter
babeltrace-log(1)
Babeltrace Log Converter
backend(7)
cups backend transmission interfaces
backend-spec(7)
interface between jw and its backends
backup_interactive(8)
Enters interactive mode
backup_jobs(8)
Lists pending and running operations in interactive mode
backup_kill(8)
Terminates a pending or running operation
backup_listhosts(8)
Lists Tape Coordinators registered in the Backup Database
backup_quit(8)
Leaves interactive mode
balls(l)
preprocessor for space-filling models in Raster3D molecular graphics package
banner(6)
print large banner on printer
batcher(8)
Article batching for InterNetNews
battmond(1)
monitor battery level on ACPI-enabled (laptop) computers
batv-filter(8)
BATV (Bounce Address Tag Validation) filter for sendmail
baudrate(3), erasechar(3), erasewchar(3), has_ic(3), has_il(3), killchar(3), killwchar(3), longname(3), term_attrs(3), termattrs(3), termname(3)
curses environment query routines
baudrate(3x), erasechar(3x), erasewchar(3x), has_ic(3x), has_il(3x), killchar(3x), killwchar(3x), longname(3x), term_attrs(3x), termattrs(3x), termname(3x)
curses environment query routines
bce(4)
QLogic NetXtreme II (BCM5706/5708/5709/5716) PCI/PCIe Gigabit Ethernet adapter driver
bcfg2-lint.conf(5)
Configuration parameters for bcfg2-lint rst2man-indent-level 0 1 rstReportMargin \$1
bcfg2.conf(5)
Configuration parameters for Bcfg2 rst2man-indent-level 0 1 rstReportMargin \$1
bcomps(1)
biconnected components filter for graphs
bdeinfo(1)
determines information about a BitLocker Drive Encrypted (BDE) volume
besside-ng(8)
crack a WEP or WPA key without user intervention and collaborate with WPA cracking statistics
besside-ng-crawler(1)
filter EAPOL frames from a directory of capture files
bf_compact(1)
shell script to compact a bogofilter directory
bf_copy(1)
shell script to copy a bogofilter working directory
bf_tar(1)
shell script to write a tar file of a bogofilter directory to stdout
bfort(1)
program to extract short definitions for a Fortran to C interface
bgexec(n)
Run programs in the background while handling Tk events. kill - Terminate program or send signal
bgpq(8)
generate access-lists for cisco/juniper routers and GateD
bgpq3(8)
bgp filtering automation for cisco and juniper routers
bgs(1)
back ground setter
bhnd(4)
Broadcom Home Networking Division interconnect bus
bhnd(9)
BHND driver programming interface
bhndb(4)
Broadcom Home Networking Division interconnect bridge driver
bibtexconv(1)
BibTeX Converter
bibtexconv-odt(1)
ODT Helper Script for BibTeX Converter
bibview(1)
an X based graphical user interface for manipulating BibTeX databases
bin2obj(1)
The Free Pascal binary to pascal include file converter
bindCDKObject(3), bindCDKObject checkCDKObjectBind cleanCDKObjectBindings unbindCDKObject getcCDKObject getchCDKObject cdk_binding(3)
Curses Development Kit Character Binding Capabilities
bios(9), bios_sigsearch(9), bios32_SDlookup(9), bios32(9), bios_oem_strings(9)
interact with PC BIOS
bitmap(1), bmtoa(1), atobm(1)
bitmap editor and converter utilities for the X Window System
blastclust(1)
BLAST score-based single-linkage clustering
blaster(6)
simulation of space combat
blitspin(6)
rotate a bitmap in an interesting way
bmf(1)
efficient Bayesian mail filter
bmfconv(1)
Database converter for bmf
bn_mul_words(3), bn_mul_add_words(3), bn_sqr_words(3), bn_div_words(3), bn_add_words(3), bn_sub_words(3), bn_mul_comba4(3), bn_mul_comba8(3), bn_sqr_comba4(3), bn_sqr_comba8(3), bn_cmp_words(3), bn_mul_normal(3), bn_mul_low_normal(3), bn_mul_recursive(3), bn_mul_part_recursive(3), bn_mul_low_recursive(3), bn_mul_high(3), bn_sqr_normal(3), bn_sqr_recursive(3), bn_expand(3), bn_wexpand(3), bn_expand2(3), bn_fix_top(3), bn_check_top(3), bn_print(3), bn_dump(3), bn_set_max(3), bn_set_high(3), bn_set_low(3)
BIGNUM library internal functions
bogofilter(1)
fast Bayesian spam filter
bogom(8)
simple sendmail milter to interface bogofilter
bogotune(1)
find optimum parameter settings for bogofilter
bogoupgrade(1)
upgrades bogofilter database to current version
bogoutil(1)
Dumps, loads, and maintains bogofilter database files
bootparamd(8)
boot parameter server
bootparams(5)
boot parameter database
bootpd(8), bootpgw(8)
Internet Boot Protocol server/gateway
bootptab(5)
Internet Bootstrap Protocol server database
border_set(3), wborder_set(3), box_set(3), hline_set(3), whline_set(3), mvhline_set(3), mvwhline_set(3), vline_set(3), wvline_set(3), mvvline_set(3), mvwvline_set(3)
create curses borders or lines using complex characters and renditions
border_set(3x), wborder_set(3x), box_set(3x), hline_set(3x), whline_set(3x), mvhline_set(3x), mvwhline_set(3x), vline_set(3x), wvline_set(3x), mvvline_set(3x), mvwvline_set(3x)
create curses borders or lines using complex characters and renditions
bos_salvage(8)
Restores internal consistency to a file system or volume
bos_start(8)
Starts a process after setting its status flag
bos_stop(8)
Stops a process after changing its status flag
bosco_cluster(1)
Manage and configure the clusters to be accessed
bosskill(8)
send a signal to your boss, or terminate your boss
boxes(1)
text mode box and comment drawing filter
bpf(4)
Berkeley Packet Filter
bpf(9)
Berkeley Packet Filter
bpython(1)
a fancy {curtsies, curses, urwid} interface to the Python interactive interpreter rst2man-indent-level 0 1 rstReportMargin \$1
broctl(8)
interactive shell for managing Bro installations
bsd(n), BSD(n)
Tcl interface to various BSD UNIX functions
bse(5), BSE(5)
Better Sound Engine File Format
bsnmp-regex(8)
an SNMP module which produces counters from logs or other text
bt(4)
Buslogic/Mylex MultiMaster SCSI host adapter driver
bt_gethostbyname(3), bt_gethostbyaddr(3), bt_gethostent(3), bt_sethostent(3), bt_endhostent(3), bt_getprotobyname(3), bt_getprotobynumber(3), bt_getprotoent(3), bt_setprotoent(3), bt_endprotoent(3), bt_aton(3), bt_ntoa(3), bt_devaddr(3), bt_devname(3), bt_devinfo(3), bt_devenum(3), bt_devopen(3), bt_devclose(3), bt_devsend(3), bt_devrecv(3), bt_devreq(3), bt_devfilter(3), bt_devfilter_pkt_set(3), bt_devfilter_pkt_clr(3), bt_devfilter_pkt_tst(3), bt_devfilter_evt_set(3), bt_devfilter_evt_clr(3), bt_devfilter_evt_tst(3), bt_devinquiry(3), bt_devremote_name(3), bt_devremote_name_gen(3), bdaddr_same(3), bdaddr_any(3), bdaddr_copy(3)
Bluetooth routines
btape(8)
Bareos's Tape interface test program
btcli(1)
command line interface to btpd
btowc(3), wctob(3)
convert between wide and single-byte characters
bugle-log(7)
configure logging output from other filter-sets
bugle-unwindstack(7)
recover a stack trace after a segmentation fault
bugz(1)
command line interface to bugzilla
bus_dma(9), bus_dma_tag_create(9), bus_dma_tag_destroy(9), bus_dmamap_create(9), bus_dmamap_destroy(9), bus_dmamap_load(9), bus_dmamap_load_bio(9), bus_dmamap_load_ccb(9), bus_dmamap_load_mbuf(9), bus_dmamap_load_mbuf_sg(9), bus_dmamap_load_uio(9), bus_dmamap_unload(9), bus_dmamap_sync(9), bus_dmamem_alloc(9), bus_dmamem_free(9)
Bus and Machine Independent DMA Mapping Interface
busy(n)
Make Tk widgets busy, temporarily blocking user interactions
bwping(8), bwping and bwping6 are tools to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism. bwping deals with IPv4 networks(8), while bwping6(8)
with IPv6 networks
bwping6(8), bwping and bwping6 are tools to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism. bwping deals with IPv4 networks(8), while bwping6(8)
with IPv6 networks
bxe(4)
QLogic NetXtreme II Ethernet 10Gb PCIe adapter driver
bximage(1)
Interactive Disk Image Creation, Conversion, Resize and Redolog Commit Tool for Bochs
byobu-enable(1), byobu-disable(1)
wrapper script for enabling/disabling automatic startup of byobu after login into text console
byobu-janitor(1)
script for cleaning and upgrading environment after upgrades
bzmore(1), bzless(1)
file perusal filter for crt viewing of bzip2 compressed text
c-icap(8)
ICAP filtering server
c2hs(1)
C->Haskell Interface Generator
c_incl(1)
determine dependencies "c_incl(1)" "determine include dependencies"
cache(8)
cache parameters
cacheinfo(5)
Defines configuration parameters for the Cache Manager
cachemgr.cgi(8)
Squid HTTP proxy manager CGI web interface
cal(1), ncal(1)
displays a calendar and the date of Easter
cal3d_converter(1)
convert cal3d files from / to binary and XML (version 0.12.0)
caldavd(8)
Calendar Server Control Interface
calendarserver_shell(8)
Calendar Server interactive administrative shell
call_once(3), cnd_broadcast(3), cnd_destroy(3), cnd_init(3), cnd_signal(3), cnd_timedwait(3), cnd_wait(3), mtx_destroy(3), mtx_init(3), mtx_lock(3), mtx_timedlock(3), mtx_trylock(3), mtx_unlock(3), thrd_create(3), thrd_current(3), thrd_detach(3), thrd_equal(3), thrd_exit(3), thrd_join(3), thrd_sleep(3), thrd_yield(3), tss_create(3), tss_delete(3), tss_get(3), tss_set(3)
C11 threads interface
callout_active(9), callout_deactivate(9), callout_async_drain(9), callout_drain(9), callout_handle_init(9), callout_init(9), callout_init_mtx(9), callout_init_rm(9), callout_init_rw(9), callout_pending(9), callout_reset(9), callout_reset_curcpu(9), callout_reset_on(9), callout_reset_sbt(9), callout_reset_sbt_curcpu(9), callout_reset_sbt_on(9), callout_schedule(9), callout_schedule_curcpu(9), callout_schedule_on(9), callout_schedule_sbt(9), callout_schedule_sbt_curcpu(9), callout_schedule_sbt_on(9), callout_stop(9), callout_when(9), timeout(9), untimeout(9)
execute a function after a specified length of time
camlp5(1)
Pre-Precessor-Pretty-Printer for ocaml mkcamlp5 - Create custom camlp5 mkcamlp5.opt - Create custom camlp5 (native code) ocpp5 - Universal preprocessor
cannakill(1)
Terminate operation of the Kana-Kanji conversion server cannaserver
cap_enter(2), cap_getmode(2)
Capability mode system calls
captoinfo(1m)
convert a termcap description into a terminfo description
catdvi(1)
a DVI to plain text converter
cave(1)
Play ascii character animations
cbc-pillowfight(1)
Stress Test for Couchbase Client and Cluster
cblog.fcgi(1), cblog.cgi(1)
fastcgi interface for cblog
ccdoc(1)
C++ interface documentation tool
ccfilter(3)
Mapping IPv4 addresses to country codes
ccomps(1)
connected components filter for graphs
cd-drive(1)
show CD-ROM drive characteristics
cdbtf2(l), CDBTF2(l)
compute an LU factorization of a real m-by-n band matrix A without using partial pivoting with row interchanges
cdbtrf(l), CDBTRF(l)
compute an LU factorization of a real m-by-n band matrix A without using partial pivoting or row interchanges
cdk_screen(3), destroyCDKScreen endCDK eraseCDKScreen initCDKColor initCDKScreen lowerCDKObject raiseCDKObject refreshCDKScreen registerCDKObject unregisterCDKObject cdk_screen(3)
Cdk Screen and Widget Manipulation Functions
cdplay(1)
play CD's with nice interface on console
ceil(3), ceilf(3), ceill(3)
smallest integral value greater than or equal to x
celtic(6)
draws celtic cross-stich patterns
centerim(1)
a text mode based IM client for Linux, *BSD, Sun Solaris, MacOS X and possibly, other Unices. ICQ2000, Yahoo!, AIM TOC, IRC, MSN, Gadu-Gadu and Jabber protocols are now supported. Internal LiveJournal client and RSS reader are also provided
centre_dialog(3)
Centers an array of dialog objects. Allegro game programming library
ceylon-jigsaw(1), ceylon jigsaw(1)
Tools to interop with Java 9 (Jigsaw) modules
cf(1)
unix time to formated time and date filter
cfg(3m)
persistent configuration properties interface
cfgetispeed(3), cfsetispeed(3), cfgetospeed(3), cfsetospeed(3), cfsetspeed(3), cfmakeraw(3), cfmakesane(3), tcgetattr(3), tcsetattr(3)
manipulating the termios structure
cfi(4), cfid(4)
driver for Common Flash Interface (CFI) NOR flash
cfs(1)
Coda File System Interface Program
cgiEscape(3)
HTML escape certain characters in a string
cgi_cookie_authority(3), cgi_cookie_authority (3)
determine the cookie authority for a domain
cgi_filehandle(3), cgi_filehandle (3)
return a file pointer to an uploaded file
cgi_register_parse_cb(3), cgi_register_parse_cb (3)
Register a parse callback
cgioptions.cfg(5)
Command-line parameters for the Xymon CGI tools
cgiwrap_iterenv(3), cgiwrap_iterenv (3)
iterater for env vars
charon.pipe(1)
filter filenames generated by tartarus and print those exceeding a certain age
charset.conf(5)
Configiration file for legacy character set support by Sympa
check_utility_compat(3)
determine whether a utility should be compatible
checkvms(1)
sanity check registered Java VMs
chem(1)
groff preprocessor for producing chemical structure diagrams co Copyright [co] 2006-2014 Free Software Foundation, Inc. This file is part of chem, which is part of groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text for GPL2 is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . au This file was written by Bernd Warken <groff-bernd.warken-72@web.de>. It is based on the documentation of Brian Kernighan's original awk version of chem at http://cm.bell-labs.com/cm/cs/who/bwk/index.html . . t .ds EL N'188' .ds EL .|.|.
cherokee-admin(1)
Runs Cherokee's administrative interface
cherokee-admin-launcher(1)
Easy launcher for Cherokee's administrative interface
cherokee-tweak(1)
Command-line interface to the administration interface of Cherokee
cherokee-worker(1)
Cherokee Web Server internal worker
chgrep(1)
change oldpattern to newpattern
chibi-scheme(1)
a tiny Scheme interpreter
chilli_query(1)
Interface into the chilli server
chromium-bsu(6)
slick scrolling space shooter
chronyc(1)
command-line interface for chrony daemon
cibadmin(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
cint(1)
C/C++ interpreter
ciss(4)
Common Interface for SCSI-3 Support driver
ck_array_buffer(3)
return length and pointer to array of reader-visible pointers
ck_array_deinit(3)
destroy and deinitialize a pointer array
ck_array_init(3)
initialize a pointer array
ck_array_length(3)
returns the number of pointers committed to an array
ck_array_put(3)
attempt immediate or deferred insertion of a pointer into array
ck_array_put_unique(3)
attempt immediate or deferred insertion of a unique pointer into array
ck_array_remove(3)
attempt immediate or deferred removal of a pointer from an array
ck_bitmap_base(3)
determine the size of a bit array in bytes
ck_bitmap_buffer(3)
returns pointer to bit array
ck_bitmap_iterator_init(3)
initialize bitmap iterator
ck_bitmap_next(3)
iterate to the next set bit in bitmap
ck_bitmap_test(3)
determine if the bit at the specified index is set
ck_brlock(3), ck_brlock_init(3), ck_brlock_write_lock(3), ck_brlock_write_unlock(3), ck_brlock_write_trylock(3), ck_brlock_read_register(3), ck_brlock_read_unregister(3), ck_brlock_read_lock(3), ck_brlock_read_trylock(3), ck_brlock_read_unlock(3)
big-reader locks
ck_cohort(3)
generalized interface for lock cohorts
ck_epoch_register(3)
register a thread for epoch reclamation
ck_epoch_unregister(3)
unregister a thread for epoch reclamation
ck_hs_iterator_init(3)
initialize hash set iterator
ck_hs_next(3)
iterate to next entry in hash set
ck_ht_entry_empty(3)
determine whether entry contains a key-value pair
ck_ht_entry_key(3)
return pointer to key as specified in hash table entry
ck_ht_entry_key_set(3)
initialize pointer to key in hash table entry
ck_ht_entry_value(3)
return pointer to value as specified in hash table entry
ck_ht_iterator_init(3)
initialize hash table iterator
ck_ht_next(3)
iterate to next entry in hash table
ck_pflock(3), ck_pflock_init(3), ck_pflock_write_lock(3), ck_pflock_write_unlock(3), ck_pflock_read_lock(3), ck_pflock_read_unlock(3)
centralized phase-fair reader-writer locks
ck_pr(3)
concurrency primitives interface
ck_queue(3), CK_LIST_EMPTY(3), CK_LIST_ENTRY(3), CK_LIST_FIRST(3), CK_LIST_FOREACH(3), CK_LIST_FOREACH_SAFE(3), CK_LIST_HEAD(3), CK_LIST_HEAD_INITIALIZER(3), CK_LIST_INIT(3), CK_LIST_INSERT_AFTER(3), CK_LIST_INSERT_BEFORE(3), CK_LIST_INSERT_HEAD(3), CK_LIST_MOVE(3), CK_LIST_NEXT(3), CK_LIST_REMOVE(3), CK_LIST_SWAP(3), CK_SLIST_EMPTY(3), CK_SLIST_ENTRY(3), CK_SLIST_FIRST(3), CK_SLIST_FOREACH(3), CK_SLIST_FOREACH_PREVPTR(3), CK_SLIST_FOREACH_SAFE(3), CK_SLIST_HEAD(3), CK_SLIST_HEAD_INITIALIZER(3), CK_SLIST_INIT(3), CK_SLIST_INSERT_AFTER(3), CK_SLIST_INSERT_HEAD(3), CK_SLIST_MOVE(3), CK_SLIST_NEXT(3), CK_SLIST_REMOVE(3), CK_SLIST_REMOVE_AFTER(3), CK_SLIST_REMOVE_HEAD(3), CK_SLIST_SWAP(3), CK_STAILQ_CONCAT(3), CK_STAILQ_EMPTY(3), CK_STAILQ_ENTRY(3), CK_STAILQ_FIRST(3), CK_STAILQ_FOREACH(3), CK_STAILQ_FOREACH_SAFE(3), CK_STAILQ_HEAD(3), CK_STAILQ_HEAD_INITIALIZER(3), CK_STAILQ_INIT(3), CK_STAILQ_INSERT_AFTER(3), CK_STAILQ_INSERT_HEAD(3), CK_STAILQ_INSERT_TAIL(3), CK_STAILQ_MOVE(3), CK_STAILQ_NEXT(3), CK_STAILQ_REMOVE(3), CK_STAILQ_REMOVE_AFTER(3), CK_STAILQ_REMOVE_HEAD(3), CK_STAILQ_SWAP(3)
multi-reader single-writer singly-linked lists, singly-linked tail queues and lists
ck_rhs_iterator_init(3)
initialize hash set iterator
ck_rhs_next(3)
iterate to next entry in hash set
ck_ring_capacity(3)
returns number of pointer slots in bounded FIFO
ck_ring_dequeue_spmc(3)
dequeue pointer from bounded FIFO
ck_ring_dequeue_spsc(3)
dequeue pointer from bounded FIFO
ck_ring_enqueue_spmc(3)
enqueue pointer into bounded FIFO
ck_ring_enqueue_spmc_size(3)
enqueue pointer into bounded FIFO and return size of buffer
ck_ring_enqueue_spsc(3)
enqueue pointer into bounded FIFO
ck_ring_enqueue_spsc_size(3)
enqueue pointer into bounded FIFO and return size of buffer
ck_ring_size(3)
return number of pointers enqueued in bounded FIFO
ck_rwcohort(3)
generalized interface for reader-writer locks using cohort locks
ck_rwlock(3), ck_rwlock_init(3), ck_rwlock_write_lock(3), ck_rwlock_write_unlock(3), ck_rwlock_write_trylock(3), ck_rwlock_write_downgrade(3), ck_rwlock_locked_writer(3), ck_rwlock_read_lock(3), ck_rwlock_read_trylock(3), ck_rwlock_read_unlock(3), ck_rwlock_locked_reader(3), ck_rwlock_recursive_write_lock(3), ck_rwlock_recursive_write_trylock(3), ck_rwlock_recurisve_write_unlock(3), ck_rwlock_recursive_read_lock(3), ck_rwlock_recursive_read_trylock(3), ck_rwlock_recursive_read_unlock(3)
centralized write-biased reader-writer locks
ck_swlock(3), ck_swlock_init(3), ck_swlock_write_latch(3), ck_swlock_write_unlatch(3), ck_swlock_write_lock(3), ck_swlock_write_unlock(3), ck_swlock_write_trylock(3), ck_swlock_write_downgrade(3), ck_swlock_locked_writer(3), ck_swlock_read_lock(3), ck_swlock_read_trylock(3), ck_swlock_read_unlock(3), ck_swlock_locked_reader(3)
centralized copy-safe write-biased single-writer read-write locks
ck_tflock(3), ck_tflock_ticket_init(3), ck_tflock_ticket_write_lock(3), ck_tflock_ticket_write_unlock(3), ck_tflock_ticket_read_lock(3), ck_tflock_ticket_read_unlock(3)
centralized task-fair reader-writer locks
clamav-milter(8)
milter compatible mail scanner
clamav-milter.conf(5)
Configuration file for clamav-milter
clamcour(1)
Courier filter for ClamAV to scan incoming mail for viruses
clamtk(1), ClamTk(1)
Graphical user interface (gui) for Clam AntiVirus
clearbddsystemrefext(3)
clears the external references for all bdd nodes. man1/alc_origin.1
clearbddsystemrefint(3)
clears the internal references for all bdd nodes. man1/alc_origin.1
clearxs(1)
Daily update for the xs-httpd counter file
clientlib(3)
NNTP clientlib part of InterNetNews library
clientsocket(3bobcat), FBB::ClientSocket(3bobcat)
Client Socket connecting to a Server in the Internet
clig_Double(n), ::clig::Double(n)
declare an option with parameters of type double
clig_Float(n), ::clig::Float(n)
declare an option with parameters of type float
clig_Int(n), ::clig::Int(n)
declare an option with parameters of type int
clig_Long(n), ::clig::Long(n)
declare an option with parameters of type long
clig_String(n), ::clig::String(n)
declare an option with parameters of type string
clig_parseCmdline(n), ::clig::parseCmdline(n)
command line interpreter for Tcl
climmcmds(7), climm(7)
interactive commands
clock(3)
determine processor time used
cluster(1)
find clusters in a graph and augment the graph with this information
clusterdb(1)
cluster a PostgreSQL database
clustersed(1)
quickly dissect cluster files
cmap_iter_finalize(3)
Finalize iterator for keys stored in CMAP
cmap_iter_init(3)
Initialize iterator for keys stored in CMAP
cmap_iter_next(3)
Return next item in iteration in CMAP
cmdfinder(3bobcat), FBB::CmdFinder(3bobcat)
Determine (member) function associated with a command
cntraining(1)
character normalization training for Tesseract
co(1)
Copyright [co] 2004-2014 Free Software Foundation, Inc. This file is part of the gdiffmk utility, which is part of groff, a free software project. You can redistribute and/or modify gdiffmk under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. gdiffmk is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. . au This document was written and is maintained by MBianchi@Foveal.com Mike Bianchi
coax(1)
determine impedance of a coaxial structure, where the inner may be offset from the centre if necessary
col(1)
filter reverse line feeds from input
colcrt(1)
filter nroff output for CRT previewing
collectdctl(1)
Control interface for collectd
color_map(3)
Global pointer to the color mapping table. Allegro game programming library
compton-trans(1)
an opacity setter tool
comservd(8)
make network terminal server serial ports accessible via /dev
condor_fetchlog(1)
Retrieve a daemon's log file that is located on another computer
condor_job_router_info(1)
Discover and display information related to job routing
condor_master(1)
The master HTCondor Daemon
condor_ping(1)
Attempt a security negotiation to determine if it succeeds
condor_router_history(1)
Display the history for routed jobs
condor_router_q(1)
Display information about routed jobs in the queue
condor_router_rm(1)
Remove jobs being managed by the HTCondor Job Router
condor_set_shutdown(1)
Set a program to execute upon condor_master shut down
confexport(8)
configuration exporter
config_intrhook(9)
schedule a function to be run after interrupts have been enabled, but before root is mounted
conjure(1)
interprets and executes scripts written in the Magick Scripting Language (MSL)
consang(1)
Computer Genealogical Consanguinities
convickt(1)
convert INTERCAL files between formats
cook_bom(1)
bill of materials "cook_bom(1)" "bill of materials
copytape(5)
copytape intermediate data file format
coqdep(1)
Compute inter-module dependencies for Coq and Caml programs
coqide(1)
The Coq Proof Assistant graphical interface
corebird(1)
Native Gtk+ Twitter client for the Linux desktop
corosync(8)
The Corosync Cluster Engine
couchjs(1)
Apache CouchDB JavaScript interpreter
countdown(1)
count down a specified time interval
counter(9)
SMP-friendly kernel counter implementation
courierfilter(8)
Courier mail filters
courierperlfilter(8)
Sample Perl-based mail filter
cpg_finalize(3)
Terminate a connection to the CPG service
cpg_iteration_finalize(3)
Finalize iterator for members of CPG
cpg_iteration_initialize(3)
Initialize iterator for members of CPG
cpg_iteration_next(3)
Return next item in iteration of CPG
cpl_complete_word(3), cfc_file_start(3), cfc_literal_escapes(3), cfc_set_check_fn(3), cpl_add_completion(3), cpl_file_completions(3), cpl_last_error(3), cpl_list_completions(3), cpl_recall_matches(3), cpl_record_error(3), del_CplFileConf(3), del_WordCompletion(3), new_CplFileConf(3), new_WordCompletion(3)
lookup possible completions for a word
cr_cansee(9)
determine visibility of objects given their user credentials
cr_seeothergids(9)
determine visibility of objects given their group memberships
cr_seeotheruids(9)
determine visibility of objects given their user credentials
createNodeTermBdd(3)
creates a terminal node of variable
createrepo(8)
Create repomd (xml-rpm-metadata) repository
critcl_iassoc(n), critcl::iassoc(n)
CriTcl Utilities: Tcl Interp Associations
critcl_literals(n), critcl::literals(n)
CriTcl Utilities: Constant string pools
critical_enter(9), critical_exit(9)
enter and exit a critical region
critter(6), Critical Mass(6)
Space shootemup resembling Galaxian
crlupdate(1)
Mono Certficate Revocation List Downloader and Updater
crm(8)
Pacemaker command line interface for configuration and management
crm_attribute(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_diff(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_error(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_failcount(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_master(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_mon(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_node(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_report(8)
Part of the Pacemaker cluster resource manager
crm_resource(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_shadow(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_simulate(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_standby(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_ticket(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crm_verify(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crmadmin(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
crmsh_hb_report(8)
create report for CRM based clusters (Pacemaker)
crtsv(1)
mutual converter between TSV and QDBM Curia database
crude(8)
collector for rude (real-time UDP data emitter)
crunch(1)
generate wordlists from a character set
cs2cs(1)
cartographic coordinate system filter
cs_register_esc_strfunc(3), cs_register_esc_strfunc (3)
cs_register_strfunc with escaping context
cs_register_fileload(3), cs_register_fileload (3)
register a fileload function
cs_register_strfunc(3), cs_register_strfunc (3)
register a string handling function
cscope(1)
interactively examine a C program
csh(1)
a shell (command interpreter) with C-like syntax
csharp(1), gsharp(1)
Interactive C# Shell
csi(1), The(1)
CHICKEN Scheme interpreter
csplit(1)
split a file into sections determined by context lines
csv(3)
CSV parser and writer library
csv2rec(1)
csv to rec converter
csv2tbx(1), csv2tbx.py(1)
Convert Comma-Separated Value (.csv) files to a TermBase eXchange (.tbx) glossary file
csync2(1)
cluster synchronization tool, 2nd generation
ctermid(3)
generate terminal pathname
ctlinnd(8)
Control the main InterNetNews daemon
ctpp2i(1)
CTPP template iterpreter
cups-browsed(8)
A daemon for browsing the Bonjour broadcasts of shared, remote CUPS printers
cups-calibrate(8)
ESP CUPS Printer Calibration Tool
cups-lpd(8)
receive print jobs and report printer status to lpd clients
cupsaddsmb(8)
export printers to samba for windows clients
cupsdisable(8), cupsenable(8)
stop/start printers and classes
cupsfilter(8)
convert a file to another format using cups filters
curl_multi_assign(3)
set data to associate with an internal socket
curpriority_cmp(9), maybe_resched(9), resetpriority(9), roundrobin(9), roundrobin_interval(9), sched_setup(9), schedclock(9), schedcpu(9), setrunnable(9), updatepri(9)
perform round-robin scheduling of runnable processes
cuse(3), libcuse(3)
Userland character device library
cuse4bsd(3), libcuse4bsd(3)
Userland character device library
cutecom(1)
graphical serial terminal
cw(1)
sound characters as Morse code on the soundcard or console speaker
cw(7), CW(7)
the international Morse code
cwgen(1)
generate groups of random characters for Morse code practice
cwu(1)
(color wrapper) directive updater
cxClose(3)
Closes a file pointer
cxDestroyFsIterator(3)
Destroys a filesystem iterator
cxGetFpAccessMode(3)
Returns the access mode of the specified file pointer
cxGetFsIterFirst(3)
Returns the first item
cxGetFsIterNext(3)
Returns the next item
cxGetFsIterPrev(3)
Returns the previous item
cxGets(3)
Reads in a line from from a file pointer
cxNewFp(3)
Creates a file pointer structure
cxNewFsIterator(3)
Creates a filesystem iterator
cxRead(3)
Reads data from a file pointer
cxRegisterModule(3)
Registers a module
cxSetCloseFunc(3)
Sets the close function for this file pointer
cxSetError(3)
Sets the current error number and string
cxSetFpAccessMode(3)
Sets the access mode of the specified file pointer
cxSetReadFunc(3)
Sets the read function for this file pointer
cxSetSeekFunc(3)
Sets the seek function for this file pointer
cxSetWriteFunc(3)
Sets the write function for this file pointer
cxWrite(3)
Writes data to a file pointer
cxgb(4)
Chelsio T3 10 Gigabit Ethernet adapter driver
cxgbe(4)
Chelsio T4-, T5-, and T6-based 100Gb, 40Gb, 25Gb, 10Gb, and 1Gb Ethernet adapter driver
cyapa(4)
Cypress APA trackpad with I2C interface driver
d2i_ACCESS_DESCRIPTION(3), d2i_ASIdOrRange(3), d2i_ASIdentifierChoice(3), d2i_ASIdentifiers(3), d2i_ASN1_BIT_STRING(3), d2i_ASN1_BMPSTRING(3), d2i_ASN1_ENUMERATED(3), d2i_ASN1_GENERALIZEDTIME(3), d2i_ASN1_GENERALSTRING(3), d2i_ASN1_IA5STRING(3), d2i_ASN1_INTEGER(3), d2i_ASN1_NULL(3), d2i_ASN1_OBJECT(3), d2i_ASN1_OCTET_STRING(3), d2i_ASN1_PRINTABLE(3), d2i_ASN1_PRINTABLESTRING(3), d2i_ASN1_SEQUENCE_ANY(3), d2i_ASN1_SET_ANY(3), d2i_ASN1_T61STRING(3), d2i_ASN1_TIME(3), d2i_ASN1_TYPE(3), d2i_ASN1_UINTEGER(3), d2i_ASN1_UNIVERSALSTRING(3), d2i_ASN1_UTCTIME(3), d2i_ASN1_UTF8STRING(3), d2i_ASN1_VISIBLESTRING(3), d2i_ASRange(3), d2i_AUTHORITY_INFO_ACCESS(3), d2i_AUTHORITY_KEYID(3), d2i_BASIC_CONSTRAINTS(3), d2i_CERTIFICATEPOLICIES(3), d2i_CMS_ContentInfo(3), d2i_CMS_ReceiptRequest(3), d2i_CMS_bio(3), d2i_CRL_DIST_POINTS(3), d2i_DHxparams(3), d2i_DIRECTORYSTRING(3), d2i_DISPLAYTEXT(3), d2i_DIST_POINT(3), d2i_DIST_POINT_NAME(3), d2i_DSAPrivateKey(3), d2i_DSAPrivateKey_bio(3), d2i_DSAPrivateKey_fp(3), d2i_DSAPublicKey(3), d2i_DSA_PUBKEY_bio(3), d2i_DSA_PUBKEY_fp(3), d2i_DSA_SIG(3), d2i_DSAparams(3), d2i_ECPKParameters(3), d2i_ECParameters(3), d2i_ECPrivateKey(3), d2i_ECPrivateKey_bio(3), d2i_ECPrivateKey_fp(3), d2i_EC_PUBKEY(3), d2i_EC_PUBKEY_bio(3), d2i_EC_PUBKEY_fp(3), d2i_EDIPARTYNAME(3), d2i_ESS_CERT_ID(3), d2i_ESS_ISSUER_SERIAL(3), d2i_ESS_SIGNING_CERT(3), d2i_EXTENDED_KEY_USAGE(3), d2i_GENERAL_NAME(3), d2i_GENERAL_NAMES(3), d2i_IPAddressChoice(3), d2i_IPAddressFamily(3), d2i_IPAddressOrRange(3), d2i_IPAddressRange(3), d2i_ISSUING_DIST_POINT(3), d2i_NETSCAPE_CERT_SEQUENCE(3), d2i_NETSCAPE_SPKAC(3), d2i_NETSCAPE_SPKI(3), d2i_NOTICEREF(3), d2i_OCSP_BASICRESP(3), d2i_OCSP_CERTID(3), d2i_OCSP_CERTSTATUS(3), d2i_OCSP_CRLID(3), d2i_OCSP_ONEREQ(3), d2i_OCSP_REQINFO(3), d2i_OCSP_REQUEST(3), d2i_OCSP_RESPBYTES(3), d2i_OCSP_RESPDATA(3), d2i_OCSP_RESPID(3), d2i_OCSP_RESPONSE(3), d2i_OCSP_REVOKEDINFO(3), d2i_OCSP_SERVICELOC(3), d2i_OCSP_SIGNATURE(3), d2i_OCSP_SINGLERESP(3), d2i_OTHERNAME(3), d2i_PBE2PARAM(3), d2i_PBEPARAM(3), d2i_PBKDF2PARAM(3), d2i_PKCS12(3), d2i_PKCS12_BAGS(3), d2i_PKCS12_MAC_DATA(3), d2i_PKCS12_SAFEBAG(3), d2i_PKCS12_bio(3), d2i_PKCS12_fp(3), d2i_PKCS7(3), d2i_PKCS7_DIGEST(3), d2i_PKCS7_ENCRYPT(3), d2i_PKCS7_ENC_CONTENT(3), d2i_PKCS7_ENVELOPE(3), d2i_PKCS7_ISSUER_AND_SERIAL(3), d2i_PKCS7_RECIP_INFO(3), d2i_PKCS7_SIGNED(3), d2i_PKCS7_SIGNER_INFO(3), d2i_PKCS7_SIGN_ENVELOPE(3), d2i_PKCS7_bio(3), d2i_PKCS7_fp(3), d2i_PKCS8_PRIV_KEY_INFO(3), d2i_PKCS8_PRIV_KEY_INFO_bio(3), d2i_PKCS8_PRIV_KEY_INFO_fp(3), d2i_PKCS8_bio(3), d2i_PKCS8_fp(3), d2i_PKEY_USAGE_PERIOD(3), d2i_POLICYINFO(3), d2i_POLICYQUALINFO(3), d2i_PROXY_CERT_INFO_EXTENSION(3), d2i_PROXY_POLICY(3), d2i_PublicKey(3), d2i_RSAPrivateKey(3), d2i_RSAPrivateKey_bio(3), d2i_RSAPrivateKey_fp(3), d2i_RSAPublicKey(3), d2i_RSAPublicKey_bio(3), d2i_RSAPublicKey_fp(3), d2i_RSA_OAEP_PARAMS(3), d2i_RSA_PSS_PARAMS(3), d2i_RSA_PUBKEY(3), d2i_RSA_PUBKEY_bio(3), d2i_RSA_PUBKEY_fp(3), d2i_SCT_LIST(3), d2i_SXNET(3), d2i_SXNETID(3), d2i_TS_ACCURACY(3), d2i_TS_MSG_IMPRINT(3), d2i_TS_MSG_IMPRINT_bio(3), d2i_TS_MSG_IMPRINT_fp(3), d2i_TS_REQ(3), d2i_TS_REQ_bio(3), d2i_TS_REQ_fp(3), d2i_TS_RESP(3), d2i_TS_RESP_bio(3), d2i_TS_RESP_fp(3), d2i_TS_STATUS_INFO(3), d2i_TS_TST_INFO(3), d2i_TS_TST_INFO_bio(3), d2i_TS_TST_INFO_fp(3), d2i_USERNOTICE(3), d2i_X509(3), d2i_X509_ALGOR(3), d2i_X509_ALGORS(3), d2i_X509_ATTRIBUTE(3), d2i_X509_CERT_AUX(3), d2i_X509_CINF(3), d2i_X509_CRL(3), d2i_X509_CRL_INFO(3), d2i_X509_CRL_bio(3), d2i_X509_CRL_fp(3), d2i_X509_EXTENSION(3), d2i_X509_EXTENSIONS(3), d2i_X509_NAME(3), d2i_X509_NAME_ENTRY(3), d2i_X509_PUBKEY(3), d2i_X509_REQ(3), d2i_X509_REQ_INFO(3), d2i_X509_REQ_bio(3), d2i_X509_REQ_fp(3), d2i_X509_REVOKED(3), d2i_X509_SIG(3), d2i_X509_VAL(3), i2d_ACCESS_DESCRIPTION(3), i2d_ASIdOrRange(3), i2d_ASIdentifierChoice(3), i2d_ASIdentifiers(3), i2d_ASN1_BIT_STRING(3), i2d_ASN1_BMPSTRING(3), i2d_ASN1_ENUMERATED(3), i2d_ASN1_GENERALIZEDTIME(3), i2d_ASN1_GENERALSTRING(3), i2d_ASN1_IA5STRING(3), i2d_ASN1_INTEGER(3), i2d_ASN1_NULL(3), i2d_ASN1_OBJECT(3), i2d_ASN1_OCTET_STRING(3), i2d_ASN1_PRINTABLE(3), i2d_ASN1_PRINTABLESTRING(3), i2d_ASN1_SEQUENCE_ANY(3), i2d_ASN1_SET_ANY(3), i2d_ASN1_T61STRING(3), i2d_ASN1_TIME(3), i2d_ASN1_TYPE(3), i2d_ASN1_UNIVERSALSTRING(3), i2d_ASN1_UTCTIME(3), i2d_ASN1_UTF8STRING(3), i2d_ASN1_VISIBLESTRING(3), i2d_ASN1_bio_stream(3), i2d_ASRange(3), i2d_AUTHORITY_INFO_ACCESS(3), i2d_AUTHORITY_KEYID(3), i2d_BASIC_CONSTRAINTS(3), i2d_CERTIFICATEPOLICIES(3), i2d_CMS_ContentInfo(3), i2d_CMS_ReceiptRequest(3), i2d_CMS_bio(3), i2d_CRL_DIST_POINTS(3), i2d_DHxparams(3), i2d_DIRECTORYSTRING(3), i2d_DISPLAYTEXT(3), i2d_DIST_POINT(3), i2d_DIST_POINT_NAME(3), i2d_DSAPrivateKey(3), i2d_DSAPrivateKey_bio(3), i2d_DSAPrivateKey_fp(3), i2d_DSAPublicKey(3), i2d_DSA_PUBKEY_bio(3), i2d_DSA_PUBKEY_fp(3), i2d_DSA_SIG(3), i2d_DSAparams(3), i2d_ECPKParameters(3), i2d_ECParameters(3), i2d_ECPrivateKey(3), i2d_ECPrivateKey_bio(3), i2d_ECPrivateKey_fp(3), i2d_EC_PUBKEY(3), i2d_EC_PUBKEY_bio(3), i2d_EC_PUBKEY_fp(3), i2d_EDIPARTYNAME(3), i2d_ESS_CERT_ID(3), i2d_ESS_ISSUER_SERIAL(3), i2d_ESS_SIGNING_CERT(3), i2d_EXTENDED_KEY_USAGE(3), i2d_GENERAL_NAME(3), i2d_GENERAL_NAMES(3), i2d_IPAddressChoice(3), i2d_IPAddressFamily(3), i2d_IPAddressOrRange(3), i2d_IPAddressRange(3), i2d_ISSUING_DIST_POINT(3), i2d_NETSCAPE_CERT_SEQUENCE(3), i2d_NETSCAPE_SPKAC(3), i2d_NETSCAPE_SPKI(3), i2d_NOTICEREF(3), i2d_OCSP_BASICRESP(3), i2d_OCSP_CERTID(3), i2d_OCSP_CERTSTATUS(3), i2d_OCSP_CRLID(3), i2d_OCSP_ONEREQ(3), i2d_OCSP_REQINFO(3), i2d_OCSP_REQUEST(3), i2d_OCSP_RESPBYTES(3), i2d_OCSP_RESPDATA(3), i2d_OCSP_RESPID(3), i2d_OCSP_RESPONSE(3), i2d_OCSP_REVOKEDINFO(3), i2d_OCSP_SERVICELOC(3), i2d_OCSP_SIGNATURE(3), i2d_OCSP_SINGLERESP(3), i2d_OTHERNAME(3), i2d_PBE2PARAM(3), i2d_PBEPARAM(3), i2d_PBKDF2PARAM(3), i2d_PKCS12(3), i2d_PKCS12_BAGS(3), i2d_PKCS12_MAC_DATA(3), i2d_PKCS12_SAFEBAG(3), i2d_PKCS12_bio(3), i2d_PKCS12_fp(3), i2d_PKCS7(3), i2d_PKCS7_DIGEST(3), i2d_PKCS7_ENCRYPT(3), i2d_PKCS7_ENC_CONTENT(3), i2d_PKCS7_ENVELOPE(3), i2d_PKCS7_ISSUER_AND_SERIAL(3), i2d_PKCS7_NDEF(3), i2d_PKCS7_RECIP_INFO(3), i2d_PKCS7_SIGNED(3), i2d_PKCS7_SIGNER_INFO(3), i2d_PKCS7_SIGN_ENVELOPE(3), i2d_PKCS7_bio(3), i2d_PKCS7_fp(3), i2d_PKCS8PrivateKeyInfo_bio(3), i2d_PKCS8PrivateKeyInfo_fp(3), i2d_PKCS8_PRIV_KEY_INFO(3), i2d_PKCS8_PRIV_KEY_INFO_bio(3), i2d_PKCS8_PRIV_KEY_INFO_fp(3), i2d_PKCS8_bio(3), i2d_PKCS8_fp(3), i2d_PKEY_USAGE_PERIOD(3), i2d_POLICYINFO(3), i2d_POLICYQUALINFO(3), i2d_PROXY_CERT_INFO_EXTENSION(3), i2d_PROXY_POLICY(3), i2d_PublicKey(3), i2d_RSAPrivateKey(3), i2d_RSAPrivateKey_bio(3), i2d_RSAPrivateKey_fp(3), i2d_RSAPublicKey(3), i2d_RSAPublicKey_bio(3), i2d_RSAPublicKey_fp(3), i2d_RSA_OAEP_PARAMS(3), i2d_RSA_PSS_PARAMS(3), i2d_RSA_PUBKEY(3), i2d_RSA_PUBKEY_bio(3), i2d_RSA_PUBKEY_fp(3), i2d_SCT_LIST(3), i2d_SXNET(3), i2d_SXNETID(3), i2d_TS_ACCURACY(3), i2d_TS_MSG_IMPRINT(3), i2d_TS_MSG_IMPRINT_bio(3), i2d_TS_MSG_IMPRINT_fp(3), i2d_TS_REQ(3), i2d_TS_REQ_bio(3), i2d_TS_REQ_fp(3), i2d_TS_RESP(3), i2d_TS_RESP_bio(3), i2d_TS_RESP_fp(3), i2d_TS_STATUS_INFO(3), i2d_TS_TST_INFO(3), i2d_TS_TST_INFO_bio(3), i2d_TS_TST_INFO_fp(3), i2d_USERNOTICE(3), i2d_X509(3), i2d_X509_ALGOR(3), i2d_X509_ALGORS(3), i2d_X509_ATTRIBUTE(3), i2d_X509_CERT_AUX(3), i2d_X509_CINF(3), i2d_X509_CRL(3), i2d_X509_CRL_INFO(3), i2d_X509_CRL_bio(3), i2d_X509_CRL_fp(3), i2d_X509_EXTENSION(3), i2d_X509_EXTENSIONS(3), i2d_X509_NAME(3), i2d_X509_NAME_ENTRY(3), i2d_X509_PUBKEY(3), i2d_X509_REQ(3), i2d_X509_REQ_INFO(3), i2d_X509_REQ_bio(3), i2d_X509_REQ_fp(3), i2d_X509_REVOKED(3), i2d_X509_SIG(3), i2d_X509_VAL(3)
convert objects from/to ASN.1/DER representation
d2i_DHparams(3), i2d_DHparams(3)
PKCS#3 DH parameter functions
daemon(8)
run detached from the controlling terminal
dahdi_tool(8)
Shows status of DAHDI interfaces
dangen(6)
shoot 'em up game where accurate shooting matters
dar_cp(1)
'cp' clone command that is able to copy data located after an I/O error
darktable-cmstest(1)
test if the color management subsystem of your computer is correctly configured
dash(1)
command interpreter (shell)
data2inc(1)
Free Pascal binary to pascal include file converter
dateround(1)
Round DATE/TIME to the next occurrence of RNDSPEC
dbh_find(3)
Find the top level subtree FILE_POINTER
dblink_build_sql_insert(3)
builds an INSERT statement using a local tuple, replacing the primary key field values with alternative supplied values
dblink_build_sql_update(3)
builds an UPDATE statement using a local tuple, replacing the primary key field values with alternative supplied values
dbmail(1)
the Database Mailer, is a suite of mail storage and retrieval programs centered around a database backend
dbmail-imapd(8)
provides access to the DBMail system to clients supporting Internet Message Access Protocol, IMAP4r1, as specified in RFC 3501
dbus(n)
Tcl library for interacting with the DBus
dbwrap_tool(1)
low level TDB/CTDB manipulation tool using the dbwrap interface
dccifd(8)
Distributed Checksum Clearinghouse Interface Daemon
dccm(8)
Distributed Checksum Clearinghouse Milter Interface
dccproc(8)
Distributed Checksum Clearinghouse Procmail Interface
dccsight(8)
Distributed Checksum Clearinghouse raw checksum interface
dcf77gen(1)
soundcard DCF77 (and HBG) transmitter
dcmqridx(1)
Register a DICOM image file in an image database index file
dcmqrti(1)
The Terminal Initiator Telnet Client Program
dcod2lum(1)
Convert hardcopy characteristic curve file to softcopy format
dconschat(8)
user interface to dcons(4)
ddb(4)
interactive kernel debugger
ddbtf2(l), DDBTF2(l)
compute an LU factorization of a real m-by-n band matrix A without using partial pivoting with row interchanges
ddbtrf(l), DDBTRF(l)
compute an LU factorization of a real m-by-n band matrix A without using partial pivoting or row interchanges
deb-control(5)
Debian binary packages' master control file format
deb-src-control(5)
Debian source packages' master control file format
decbddrefext(3)
decrements the external reference of a bdd node. man1/alc_origin.1
decbddrefint(3)
decrements the internal reference of a bdd node. man1/alc_origin.1
declean(1)
clean up after a Debian package build
del_curterm(3), mvcur(3), putp(3), restartterm(3), set_curterm(3), setterm(3), setupterm(3), tigetflag(3), tigetnum(3), tigetstr(3), tiparm(3), tparm(3), tputs(3), vid_attr(3), vid_puts(3), vidattr(3), vidputs(3)
curses interfaces to terminfo database
del_curterm(3x), mvcur(3x), putp(3x), restartterm(3x), set_curterm(3x), setterm(3x), setupterm(3x), tigetflag(3x), tigetnum(3x), tigetstr(3x), tiparm(3x), tparm(3x), tputs(3x), vid_attr(3x), vid_puts(3x), vidattr(3x), vidputs(3x)
curses interfaces to terminfo database
delay_output(3), filter(3), flushinp(3), getwin(3), key_name(3), keyname(3), nofilter(3), putwin(3), unctrl(3), use_env(3), use_tioctl(3), wunctrl(3)
miscellaneous curses utility routines
delay_output(3x), filter(3x), flushinp(3x), getwin(3x), key_name(3x), keyname(3x), nofilter(3x), putwin(3x), unctrl(3x), use_env(3x), use_tioctl(3x), wunctrl(3x)
miscellaneous curses utility routines
delch(3), wdelch(3), mvdelch(3), mvwdelch(3)
delete character under the cursor in a curses window
delch(3x), wdelch(3x), mvdelch(3x), mvwdelch(3x)
delete character under the cursor in a curses window
delete(i4), itcl::delete(i4)
delete things in the interpreter
delete(itcl)
delete things in the interpreter
deluge-console(1)
a bittorrent client curses interface
deluge-gtk(1)
a bittorrent client gtk interface
deluge-web(1)
a bittorrent client ajax web interface
des_read_password(3), des_read_2passwords(3), des_read_pw_string(3), des_read_pw(3)
Compatibility user interface functions
desktopctl(1)
Control interface for the desktop manager
detach(1)
start process detached from terminal
detachtty(1), attachtty(1)
run an interactive program with io to a unix-domain socket
detex(1)
a filter to strip TeX commands from a .tex file
deurlname(1)
Remove URL-encoded characters from file names
devctl(4)
device event reporting and device control interface
devstat(9), devstat_add_entry(9), devstat_end_transaction(9), devstat_end_transaction_bio(9), devstat_end_transaction_bio_bt(9), devstat_remove_entry(9), devstat_start_transaction(9), devstat_start_transaction_bio(9)
kernel interface for keeping device statistics
devtoname(9)
converts character device into a string indicating the device name
dfa_determinize(1)
Determinize NFA grammar network
dftest(1)
Shows display filter byte-code, for debugging dfilter routines
dhparam(1)
DH parameter manipulation and generation
dictl(1)
wrapper script for dict that permits using utf-8 encoded dictionaries on a terminal that is not utf-8 aware
diffimg(1)
Calculates intersection between two images
digittoint(3)
convert a numeric character to its integer value
digittoint(3), isalnum(3), isalpha(3), isascii(3), isblank(3), iscntrl(3), isdigit(3), isgraph(3), ishexnumber(3), isideogram(3), islower(3), isnumber(3), isphonogram(3), isprint(3), ispunct(3), isrune(3), isspace(3), isspecial(3), isupper(3), isxdigit(3), toascii(3), tolower(3), toupper(3)
character classification functions
digittoint_l(3), isalnum_l(3), isalpha_l(3), isascii_l(3), isblank_l(3), iscntrl_l(3), isdigit_l(3), isgraph_l(3), ishexnumber_l(3), isideogram_l(3), islower_l(3), isnumber_l(3), isphonogram_l(3), isprint_l(3), ispunct_l(3), isrune_l(3), isspace_l(3), isspecial_l(3), isupper_l(3), isxdigit_l(3), tolower_l(3), toupper_l(3)
character classification functions
dijkstra(1)
single-source distance filter
dircproxy(1)
Detachable Internal Relay Chat Proxy Server
direnv(1)
unclutter your .profile
disc(4)
software discard network interface
discrete(6)
discrete map iterative function fractal systems
dispatch_after(3)
schedule blocks for deferred execution
dispatch_apply(3)
schedule blocks for iterative execution
distort(6)
distort the content of the screen in interesting ways
djvudump(1)
Display internal structure of DjVu files
dk-filter(8)
DomainKeys filter for sendmail
dl_iterate_phdr(3)
iterate over program headers
dlint(8)
Internet Domain Name System (DNS) error checking utility
dllockinit(3)
register thread locking methods with the dynamic linker
dlopen(3), fdlopen(3), dlsym(3), dlfunc(3), dlerror(3), dlclose(3)
programmatic interface to the dynamic linker
dmake(1)
maintain program groups, or interdependent files
dmxtodmx(1)
dmx configuration file parser and printer
dns-filter(1)
filter DNS database files "dns-filter(1)" "filter DNS database files"
dns-terror(1)
fast log file IP address resolver
dnsbulktest(1)
A debugging tool for intermittent resolver failures
dnsfilter(1)
reverse-resolves IP addresses, converting them to host names
dnsgram(1)
A debugging tool for intermittent resolver failures
dnshistory(1)
processes various log file formats doing dns IP Address lookups. Store these pairs in a database for later retrieval
dnssec-importkey(8)
Import DNSKEY records from external systems so they can be managed
dnsspoof(8)
forge replies to DNS address / pointer queries
dnstable_iter(3)
iterate over a sequence of dnstable entries
doclifter(1)
translate troff requests into DocBook
doinkd(8)
Idle terminal and multiple login monitor daemon
dot(1)
filter for drawing directed graphs neato - filter for drawing undirected graphs twopi - filter for radial layouts of graphs circo - filter for circular layout of graphs fdp - filter for drawing undirected graphs sfdp - filter for drawing large undirected graphs patchwork - filter for squarified tree maps osage - filter for array-based layouts
doveadm-altmove(1)
Move matching mails to the alternative storage (dbox-only)
doveadm-fs(1)
Interact with the abstract mail storage filesystem
dpkg-architecture(1)
set and determine the architecture for package building
dpost(1)
troff postprocessor for PostScript printers
dptsv(1)
mutual converter between TSV and QDBM Depot database
dracauth(3)
Dynamic Relay Authorization Control client interface
draw_character_ex(3)
Draws non transparent pixels of the sprite with a color. Allegro game programming library
drbr(9), drbr_free(9), drbr_enqueue(9), drbr_dequeue(9), drbr_dequeue_cond(9), drbr_flush(9), drbr_empty(9), drbr_inuse(9)
network driver interface to buf_ring
dreampie(1), DreamPie(1)
An interactive Python shell
drmAvailable(3)
determine whether a DRM kernel driver has been loaded
dropbox(1)
A command line interface to the Dropbox service rst2man-indent-level 0 1 rstReportMargin \$1
dsaparam(1)
DSA parameter manipulation and generation
dsh(1)
run a command on a cluster of machines
dskform(1)
floppy or image file formatter for emulated machines
dspam_admin(1)
Alter DSPAM users preferences
dstein2(l), DSTEIN2(l)
compute the eigenvectors of a real symmetric tridiagonal matrix T corresponding to specified eigenvalues, using inverse iteration
dtaus(1)
Converter for DTAUS files
dtaus(5)
Converter for DTAUS files
dtop(1)
display and update information about processes on a cluster of machines
du2ps(1)
filter for converting output of du to PostScript file
dualcoax(1)
determine impedance of a coaxial structure with two concentric dielectrics
dumpelf(1)
dump internal ELF structure
dupfilter(8)
Sample Courier mail filter
dvdisaster(1), DVDISASTER(1)
data loss/scratch/aging protection for CD/DVD media
dvdxchap(1)
Extract chapter information from DVDs
dvi2tty(1)
preview a TeX DVI-file on an ordinary ascii terminal
dvilj4(1), dvilj4l(1), dvilj2p(1), dvilj(1)
convert a TeX DVI file to PCL, for HP LaserJet printers
dvtm(1)
dynamic virtual terminal manager
dwarf_get_fde_info_for_all_regs(3)
retrieve register rule row
dwarf_get_fde_info_for_all_regs3(3)
retrieve register rule row
dwarf_get_fde_info_for_cfa_reg3(3), dwarf_get_fde_info_for_cfa_regs3(3)
retrieve a CFA register rule
dwarf_get_fde_info_for_reg(3)
retrieve register rule
dwarf_get_fde_info_for_reg3(3)
retrieve register rule
dwarf_reset_section_bytes(3)
reset the internal state of a producer instance
dwarf_set_frame_cfa_value(3), dwarf_set_frame_rule_initial_value(3), dwarf_set_frame_rule_table_size(3), dwarf_set_frame_same_value(3), dwarf_set_frame_undefined_value(3)
set internal register rule table parameters
dwarf_seterrarg(3), dwarf_seterrhand(3)
configure error handling
dwfilter(1)
reformat text with dwdiff for further processing
dx(l)
start the Data Explorer visualization system. Optionally directly start the User Interface (dxui), the executive (dxexec), the Data Prompter, the Module Builder or the Tutorial
dymaxionmap(6)
An animation of Buckminster Fuller's unwrapped icosahedral globe
dynamips(1)
Cisco router simulator
dyncallback(3)
callback interface of dyncall
e2guardian(8), e2guardian2(8)
web content filter
easterg(3), easterog(3), easteroj(3), gdate(3), jdate(3), ndaysg(3), ndaysj(3), week(3), weekday(3)
Calendar arithmetic for the Christian era
easyrpg-player(6)
Interpreter for RPG Maker 2000/2003 games
ebook2cwgui(1)
Graphical user interface for ebook2cw (text to Morse converter)
ecasound-iam(1)
ecasound interactive mode
ecparam(1)
EC parameter manipulation and generation
editline(7)
line editing user interface
edsc(4)
Ethernet discard network interface
efi(8), UEFI(8)
Unified Extensible Firmware Interface bootstrapping procedures
efivar(8)
UEFI environment variable interaction
eif(1)
Empire InterFace
eiskaltdcpp-cli-jsonrpc(1), EiskaltDC++_CLI(1)
simple command line interface for EiskaltDC++ Daemon written on perl
eiskaltdcpp-cli-xmlrpc(1), EiskaltDC++_CLI(1)
simple command line interface for EiskaltDC++ Daemon written on perl
elf_fill(3)
set fill byte for inter-section padding
elf_getdata(3), elf_newdata(3), elf_rawdata(3)
iterate through or allocate section data
elf_kind(3)
determine ELF file type
elf_rawfile(3)
return uninterpreted contents of an ELF file
elf_strptr(3)
retrieve a string pointer in a string table
elinks(1)
lynx-like alternative character mode WWW browser
elk(1), scheme-elk(1)
extensible Scheme interpreter
elm(1)
an interactive mail system
em(4)
Intel(R) PRO/1000 Gigabit Ethernet adapter driver
emailrelay-filter-copy(1)
an E-MailRelay filter for pop-by-name
emil(1)
conversion filter for Internet messages
empty(1)
run processes under pseudo-terminal sessions
empty_string(3)
Universal string NULL terminator. Allegro game programming library
en(4)
device driver for Midway-based ATM interfaces
ena(4)
FreeBSD kernel driver for Elastic Network Adapter (ENA) family
enc(4)
Encapsulating Interface
encapsulate(1)
multiplex several channels over a single socket with sampling of remote process exit status, and provide conversation termination without closing the socket. netpipes 4.2
enma(1)
A milter program for domain authentication technologies
epair(4)
A pair of virtual back-to-back connected Ethernet interfaces
epic(1)
Internet Relay Chat client for UNIX like systems
epic5(1)
Internet Relay Chat client for UNIX like systems
epoch(9), epoch_context(9), epoch_alloc(9), epoch_free(9), epoch_enter(9), epoch_exit(9), epoch_wait(9), epoch_call(9), in_epoch(9)
kernel epoch based reclamation
epydocgui(1)
graphical interface to epydoc
eq(3), ecq(3)
string equality test. countchar, countchar2, countstr count characters and strings within the string. replace, replace_detach, limittextwidth miscellaneous text functions
eqnchar(7)
special character definitions for eqn
escape(1)
escape shell special characters in a string
escputil(1)
maintain Epson Stylus inkjet printers
esedbinfo(1)
determines information about an Extensible Storage Engine (ESE) Database File (EDB)
esil(7), ESIL(7)
Evaluable Strings Intermediate Language
esmtp(1)
libESMTP to Sendmail compatibility interface
estcall(1)
command line interface of the node API
estcmd(1)
command line interface of the core API
estmaster(1)
master process of node servers
estwaver(1)
command line interface of web crawler
etter.conf(5)
Ettercap configuration file
ettercap(8)
Man page for the Ncurses GUI
ettercap(8)
multipurpose sniffer/content filter for man in the middle attacks
ettercap_plugins(8), ettercap-plugins(8)
A collection of plugins for ettercap
etterfilter(8)
Filter compiler for ettercap content filtering engine
etterlog(8)
Log analyzer for ettercap log files
euc(5)
EUC encoding of wide characters
eukleides(1)
Eukleides interpreter to PostScript
euktoeps(1)
Eukleides to Encapsulated PostScript converter
euktopdf(1)
Eukleides to PDF converter
euktopst(1)
Eukleides interpreter to PSTricks
euktotex(1)
Eukleides to PSTricks converter
evilvte(1)
highly customizable terminal emulator based on VTE
evolvotron(1)
Creates generative art by an interactive evolutionary process
evtinfo(1)
determines information about a Windows Event Log (EVT)
evtxinfo(1)
determines information about a Windows XML EventViewer Log (EVTX) file
ex3buf(3)
Mode-X triple buffering and retrace interrupt simulation. Allegro game programming library
exit(3), _Exit(3)
perform normal program termination
exmh(1)
An introduction to the exmh mail user interface
expat(3)
Using patterned drawing modes and sub-bitmaps. Allegro game programming library
expect(1)
programmed dialogue with interactive programs, Version 5
expire-ip-db(1)
remove old entries from a dns-terror DB file
explain_fgetc_or_die(3)
input of characters and report errors require_index { "input of characters and report errors" }
explain_fputc_or_die(3)
output of characters and report errors require_index { "output of characters and report errors" }
explain_getc_or_die(3)
input of characters and report errors require_index { "input of characters and report errors" }
explain_getchar_or_die(3)
input of characters and report errors require_index { "input of characters and report errors" }
explain_iconv_open_or_die(3)
prepare for charset conversion and report errors require_index { "allocate descriptor for character set conversion and report errors" }
explain_iconv_or_die(3)
perform character set conversion and report errors require_index { "perform character set conversion and report errors" }
explain_putc_or_die(3)
output of characters and report errors require_index { }
explain_putchar_or_die(3)
output of characters and report errors require_index { "output of characters and report errors" }
explain_tcflow_or_die(3)
terminal flow control and report errors require_index { "terminal flow control and report errors" }
explain_tcflush_or_die(3)
discard terminal data and report errors require_index { "discard terminal data and report errors" }
explain_tcgetattr_or_die(3)
get terminal parameters and report errors require_index { "get terminal parameters and report errors" }
explain_tcsendbreak_or_die(3)
send terminal line break and report errors require_index { "explain_tcsendbreak_or_die(3)"
explain_tcsetattr_or_die(3)
set terminal attributes and report errors require_index { "set terminal attributes and report errors" }
explain_ungetc_or_die(3)
push a character back to a stream and report errors require_index { "push a character back to a stream and report errors" }
explain_usleep_or_die(3)
suspend execution for ms intervals and report errors require_index { "suspend execution for microsecond intervals and report errors" }
explode(8cn)
expand a relaynews master batch file into all the ordinary batch files implied
exquat(3)
A comparison between Euler angles and quaternions. Allegro game programming library
ext_sensors.conf(5)
Slurm configuration file for the external sensors plugin
ext_time_quota_acl(8)
Squid time quota external acl helper. Version 1.0
extcompose(1)
Compose a reference to external data for inclusion in a mail message
extimer(3)
Using the timer (delays and interrupts). Allegro game programming library
extipl(8)
a partition-selectable boot loader/installer for IBM-PC compatible computers
extlookup2hiera(8)
Converter for extlookup CSV files into Hiera JSON and YAML files -i, --in FILE Input CSV file -o, --out FILE Output Hiera file -j, --json Create JSON format file
extract_font_range(3)
Extracts a range of characters from a font. Allegro game programming library
extractres(1)
filter to extract resources from a PostScript document
eyeclock(1), EyeClock(1)
A clock application for X. The eyes follow the mouse pointer
ezbounce(1)
A highly configurable Internet Relay Chat (IRC) proxy
ezmlmglrc(5)
set up the global ezmlm interface
ezstream(1)
source client for Icecast with external de-/encoder support
f2py-2.7(1), f2py(1)
Fortran to Python interface generator
fa2htgs(1)
formatter for high throughput genome sequencing project submissions
facter(8)
Gather system information
fade_interpolate(3)
Calculates a new palette interpolated between two others. Allegro game programming library
fam(1m)
file alteration monitor
fam(3x)
File Alteration Monitor (FAM) library routines
fame_register(3)
register an object to the library
fame_unregister(3)
unregister a type from the library
fasta36(1)
scan a protein or DNA sequence library for similar sequences fastx36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfastx36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasty36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfasty36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasts36 - compare unordered peptides to a protein sequence database fastm36 - compare ordered peptides (or short DNA sequences) to a protein (DNA) sequence database tfasts36 - compare unordered peptides to a translated DNA sequence database fastf36 - compare mixed peptides to a protein sequence database tfastf36 - compare mixed peptides to a translated DNA sequence database ssearch36 - compare a protein or DNA sequence to a sequence database using the Smith-Waterman algorithm. ggsearch36 - compare a protein or DNA sequence to a sequence database using a global alignment (Needleman-Wunsch) glsearch36 - compare a protein or DNA sequence to a sequence database with alignments that are global in the query and local in the database sequence (global-local). lalign36 - produce multiple non-overlapping alignments for protein and DNA sequences using the Huang and Miller sim algorithm for the Waterman-Eggert algorithm. prss36, prfx36 - discontinued; all the FASTA programs will estimate statistical significance using 500 shuffled sequence scores if two sequences are compared
fastline(3)
Faster version of line(). Allegro game programming library
fastmail(1)
quick batch mail interface to a single address
fatm(4)
device driver for Fore PCA200E ATM interfaces
faxalter(1)
alter parameters of a job queued for transmission
faxconfig(8c)
dynamically change configuration parameters
faxquit(8c)
tell a server to terminate
fbsetbg(1)
Set a background wallpaper or pattern
fc-pattern(1)
parse and show pattern
fceux(6)
emulator for the Nintendo Entertainment System and Famicom
fcgistarter(8)
Start a FastCGI program
fd2pascal(1)
Free Pascal forms description to pascal program converter
fdcontrol(8)
display and modify floppy disk parameters
fdesign(1)
Forms Library User Interface Designer Cr n (c) (co
fence_legacy(8)
Part of the Pacemaker cluster resource manager
fence_pcmk(8)
Part of the Pacemaker cluster resource manager
ffclock_getcounter(2), ffclock_getestimate(2), ffclock_setestimate(2)
Retrieve feed-forward counter, get and set feed-forward clock estimates
ffi(3), FFI(3)
Foreign Function Interface
ffmpeg(1)
ffmpeg video converter
ffmpeg-bitstream-filters(1)
FFmpeg bitstream filters
ffmpeg-filters(1)
FFmpeg filters
ffmpeg-scaler(1)
FFmpeg video scaling and pixel format converter
ffmpeg2theora(1)
command-line converter to create Ogg Theora and Ogg Vorbis files
ffproxy(8)
filtering HTTP/HTTPS proxy server
ffproxy.conf(5)
filtering HTTP/HTTPS proxy server configuration file
ffproxy.quick(7)
filtering HTTP/HTTPS proxy server quick introduction
fgetc(3), getc(3), getc_unlocked(3), getchar(3), getchar_unlocked(3), getw(3)
get next character or word from input stream
fgetwc(3), getwc(3), getwchar(3)
get next wide character from input stream
fgetwln(3)
get a line of wide characters from a stream
fgetws(3)
get a line of wide characters from a stream
fidentify(8)
Determine file type using PhotoRec database
fifolog_create(1), fifolog_writer(1), fifolog_reader(1)
initialize, write, seek and extract data from a fifolog
figlet(6), FIGlet(6)
display large characters made up of ordinary screen characters
figurine(1)
an interactive vector drawing program
file(1)
determine file type
filechan(8)
file-writing backend for InterNetNews
filedaemon(1)
Invoke another program on files matching a glob pattern
fileschanged(1)
displays altered files
filter(1)
Generic UNIX filtering tool
filter(7)
cups file conversion filter interface
filter-clamav(8)
smtpd filter for Clam AntiVirus clamd
filter-dkim-signer(8)
smtpd filter to add DKIM signatures
filter-dnsbl(8)
smtpd filter for DNSBL checks
filter-monkey(8)
smtpd filter to arbitrary reject mails
filter-monkey.conf(5)
filter-monkey configuration file
filter-pause(8)
smtpd filter to pause on new connections
filter-regex(8)
smtpd filter for regular expression filtering
filter-regex.conf(5)
filter-regex configuration file
filter-spamassassin(8)
smtpd filter for SpamAssassin spamd
filter_api(3), filter_api_loop(3), filter_api_accept(3), filter_api_reject(3), filter_api_reject_code(3), filter_api_writeln(3), filter_api_on_connect(3), filter_api_on_helo(3), filter_api_on_mail(3), filter_api_on_rcpt(3), filter_api_on_data(3), filter_api_on_dataline(3), filter_api_on_eom(3), filter_api_on_reset(3), filter_api_on_disconnect(3), filter_api_on_commit(3), filter_api_on_rollback(3), filter_api_setugid(3), filter_api_set_chroot(3), filter_api_no_chroot(3), filter_api_set_udata(3), filter_api_get_udata(3), filter_api_timer(3), filter_api_sockaddr_to_text(3), filter_api_mailaddr_to_text(3)
filter API for smtpd
filter_create_fd(3), filter_create_fd (3)
Create a sub process and return the requested pipes
filter_create_fp(3), filter_create_fp (3)
similar to filter_create_fd except with buffered FILE*
filter_read(3), filter_write(3), filter_end(3), filter_convert(3), filter_destroy(3), filter_fopen(3), filter_process(3)
generic data filtering
filter_wait(3), filter_wait (3)
wrap waitpid to decode the exitcode and why your filter quit
filterdiff(1)
extract or exclude diffs from a diff file
filtermail(1)
Filters e-mail, gets rid of spam
filtermailex(5)
filtermail configuration file examples
filtermailrc(5)
filtermail configuration file
findmicrophones(1)
Gnash Utility For finding microphones on computer
findwebcams(1)
Gnash Utility For finding webcams on computer
fio(1)
flexible I/O tester
fio_generate_plots(1)
Generate plots for Flexible I/O Tester
firestring_estr_munch(3)
remove characters from the beginning of an estring
firestring_estr_strchr(3)
search for a character in an estring
firestring_estr_tolower(3)
convert all letters in an estring to lower case
firestring_estr_toupper(3)
convert all letters in an estring to upper case
firestring_malloc(3)
malloc (3) with internal result checking
firestring_realloc(3)
realloc (3) with internal result checking
firestring_strdup(3)
strdup (3) with internal result checking
firmware_register(9), firmware_unregister(9), firmware_get(9), firmware_put(9)
firmware image loading and management
fish(1)
-- the friendly interactive shell
fish_indent(1)
-- indenter and prettifier
fish_key_reader(1)
-- explore what characters keyboard keys send
fisql(1)
interactive SQL shell
fix-qdf(1)
repair PDF files in QDF form after editing
fix_filename_slashes(3)
Converts all the directory separators to a standard character. Allegro game programming library
fixdlsrps(1)
filter to fix DviLaser/PS documents to work with PSUtils
fixfloor(3)
Returns the greatest integer not greater than x. Allegro game programming library
fixfmps(1)
filter to fix Framemaker documents so PSUtils work
fixmacps(1)
filter to fix Macintosh documents with saner version of md
fixpsditps(1)
filter to fix Transcript psdit documents so PSUtils work
fixpspps(1)
filter to fix PSPrint PostScript so PSUtils work
fixscribeps(1)
filter to fix Scribe documents so PSUtils work
fixtpps(1)
filter to fix Tpscript documents to work with PSUtils
fixwfwps(1)
filter to fix Word for Windows documents so PSUtils work
fixwpps(1)
filter to fix WP documents so PSUtils work
fixwwps(1)
filter to fix Windows Write documents so PSUtils work
flow-filter(1)
Filter flows
flow-nfilter(1)
Filter flows
flowd-reader(8)
Read, filter and concatenate binary flowd logfiles
flowkey(3)
SiLK plug-in providing YAF flow key filter and field
flowrate(3)
SiLK plug-in providing payload and rate filters and fields
fluid(1)
the fast light user-interface designer
flyingtoasters(6)
3d space-age jet-powered flying toasters (and toast)
fmfconv(1)
Fuse Movie File converter
fms(8)
Determine a tape's capacity and a tape device's filemark size
fmt(1)
simple optimal text formatter
fmt(1)
simple text formatter
fnid(1)
Print constituent file names that match PATTERN,
fnmatch(3)
test whether a filename or pathname matches a shell-style pattern
focuswriter(1)
fullscreen word processor
fontglide(6)
characters float onto the screen to form words
foomatic-compiledb(1)
Compile the Foomatic printer/driver database
foomatic-ppdfile(1)
Generate a PPD file for a given printer/driver combo
foomatic-printjob(1)
manage printer jobs in a spooler-independent fashion
foomatic-rip(1)
Universal print filter/RIP wrapper
foremost(8)
Recover files using their headers, footers, and data structures
fork(3bobcat), FBB::Fork(3bobcat)
Implements fork(2) using the Template Design Pattern
form_field_info(3)
retrieve field characteristics
form_field_info(3x)
retrieve field characteristics
form_field_just(3)
retrieve field characteristics
form_field_just(3x)
retrieve field characteristics
formail(1)
mail (re)formatter
formsedit(1)
user interface builder for FormsVBT
fortune(6)
print a random, hopefully interesting, adage
fortunelock(1)
locks virtual terminal while displaying fortune cookies
fpcjres(1)
manual page for fpcjres: a resource file converter
fpgetround(3), fpsetround(3), fpsetprec(3), fpgetprec(3), fpgetmask(3), fpsetmask(3), fpgetsticky(3), fpresetsticky(3)
IEEE floating point interface
fputc(3), putc(3), putc_unlocked(3), putchar(3), putchar_unlocked(3), putw(3)
output a character or word to a stream
fputwc(3), putwc(3), putwchar(3)
output a wide character to a stream
fputws(3)
output a line of wide characters to a stream
fracplanet(1)
Create and view random fractal terrain and planets
fragiso(8)
split rpm packages from an iso and reassemble the iso later on
fragroute(8)
intercept, modify, and rewrite egress traffic
fragrouter(8)
network intrusion detection evasion toolkit
frama-c(1), frama-c[.byte](1)
a static analyzer for C programs frama-c-gui[.byte] - the graphical interface of frama-c
frama-c-gui(1), frama-c[.byte](1)
a static analyzer for C programs frama-c-gui[.byte] - the graphical interface of frama-c
free_mntarg(9), kernel_mount(9), kernel_vmount(9), mount_arg(9), mount_argb(9), mount_argf(9), mount_argsu(9)
functions provided as part of the kernel mount interface
freehdl-v2cc(1), FreeHDL-V2CC(1)
A VHDL to C++ converter
freeipmi_interpret_sel.conf(5)
specify system event log (SEL) interpretation rules
freeipmi_interpret_sensor.conf(5)
specify sensor interpretation rules
freevrrpd(8)
Virtual Redundancy Router Protocol Daemon
freeze_mouse_flag(3)
Flag to avoid redrawing the mouse pointer. Allegro game programming library
fribidi_get_bidi_type(3)
get character bidi type
fribidi_get_bidi_types(3)
get bidi types for an string of characters
fribidi_get_joining_type(3)
get character joining type
fribidi_get_joining_types(3)
get joining types for an string of characters
fribidi_get_mirror_char(3)
get mirrored character
fribidi_get_type(3)
get character bidi type
fribidi_get_type_internal(3)
get character bidi type
fribidi_parse_charset(3)
parse character set name
frontend-spec(7)
interface between jw and its frontends
frotz(6)
interpreter for Infocom and other Z-Machine games
frr(1)
a systemd interaction script
fs_getclientaddrs(1)
Displays the client interfaces to register
fs_setclientaddrs(1)
Sets the client interfaces to register with the File Server
fscadm(8)
Alter service monitoring status
fsck(8)
file system consistency check and interactive repair
fsck_ffs(8), fsck_ufs(8)
file system consistency check and interactive repair
fsntfsinfo(1)
determines information about a Windows NT File System (NTFS) volume
fst-generate(1)
randomly generate strings of character pairs from a transducer
fst-mor(1)
Interactive morphological analyser and generator
fstyp(8)
determine filesystem type
ftp(1)
Internet file transfer program
ftp-proxy(8)
Internet File Transfer Protocol proxy daemon
ftpd(8)
Internet File Transfer Protocol server
ftpsesame(8)
automagic packet filter configurator for FTP
fun(6)
draw pixels accumulating in clusters
funzip(1)
filter for extracting from a ZIP archive in a pipe
fvdeinfo(1)
determines information about a FileVault Drive Encrypted (FVDE) volume
fvwm-themes-com(1)
fvwm-themes communication center
fvwm-themes-start(1)
FVWM Themes starter
fwb_ipf(1)
Policy compiler for ipfilter
fwb_pf(1)
Policy compiler for OpenBSD packet filter "pf"
fzputtygen(1)
SFTP private key converter of FileZilla
gaffitter(1)
Genetic Algorithm File Fitter
galaxis(6)
rescue lifeboats lost in interstellar space
galera_new_cluster(1)
starting a new Galera cluster
gauche-cesconv(1)
convert text from one character encoding scheme to another
gauche-config(1)
retrieve configuration parameters of Gauche
gawk(1)
pattern scanning and processing language
gc(3), GC_malloc(3), GC_malloc_atomic(3), GC_free(3), GC_realloc(3), GC_enable_incremental(3), GC_register_finalizer(3), GC_malloc_ignore_off_page(3), GC_malloc_atomic_ignore_off_page(3), GC_set_warn_proc(3)
Garbage collecting malloc replacement
gcdmaster(1)
Graphical front end to cdrdao for composing audio CDs
gchroot(1), chroot(1)
run command or interactive shell with special root directory
gcloud_components_repositories(1), gcloud components repositories(1)
manage additional component repositories for Trusted Tester programs
gcloud_components_repositories_add(1), gcloud components repositories add(1)
add a new Trusted Tester component repository
gcloud_components_repositories_list(1), gcloud components repositories list(1)
list any Trusted Tester component repositories you have registered
gcloud_components_repositories_remove(1), gcloud components repositories remove(1)
remove a registered Trusted Test component repository
gcloud_compute_instance-groups_managed_set-autoscaling(1), gcloud compute instance-groups managed set-autoscaling(1)
set autoscaling parameters of a managed instance group
gcloud_compute_instances_delete-access-config(1), gcloud compute instances delete-access-config(1)
delete an access configuration from a virtual machine network interface
gcloud_container(1), gcloud container(1)
deploy and manage clusters of machines for running containers
gcloud_container_clusters(1), gcloud container clusters(1)
deploy and teardown Google Container Engine clusters
gcloud_container_clusters_create(1), gcloud container clusters create(1)
create a cluster for running containers
gcloud_container_clusters_delete(1), gcloud container clusters delete(1)
delete an existing cluster for running containers
gcloud_container_clusters_describe(1), gcloud container clusters describe(1)
describe an existing cluster for running containers
gcloud_container_clusters_get-credentials(1), gcloud container clusters get-credentials(1)
fetch credentials for a running cluster
gcloud_container_clusters_list(1), gcloud container clusters list(1)
list existing clusters for running containers
gcloud_container_clusters_resize(1), gcloud container clusters resize(1)
resizes an existing cluster for running containers
gcloud_container_clusters_upgrade(1), gcloud container clusters upgrade(1)
upgrade the Kubernetes version of an existing container cluster
gcloud_container_operations(1), gcloud container operations(1)
get and list operations for Google Container Engine clusters
gcloud_container_operations_list(1), gcloud container operations list(1)
list operations for container clusters
gcloud_topic_filters(1), gcloud topic filters(1)
resource filters supplementary help
gcv(1)
graph file converter
gdb(4)
external kernel debugger
gdisk(8)
Interactive GUID partition table (GPT) manipulator
gdnsd-plugin-extmon(8)
gdnsd plugin for monitoring via external commands
gdsreader(1)
simple Calma parser/printer tool
gearman_worker_register(3)
Gearmand Documentation, http://gearman.info/ rst2man-indent-level 0 1 rstReportMargin \$1
gearman_worker_unregister(3)
Gearmand Documentation, http://gearman.info/ rst2man-indent-level 0 1 rstReportMargin \$1
gearman_worker_unregister_all(3)
Gearmand Documentation, http://gearman.info/ rst2man-indent-level 0 1 rstReportMargin \$1
gears(6)
draw interlocking gears, for xscreensaver
gen-ctl-io(1)
generate C interface code for libctl control files
genbrk(1)
Compiles ICU break iteration rules source files into binary data files
gencnval(1)
compile the converters aliases file
gendsa(1)
generate a DSA private key from a set of parameters
genpat(1)
A procedural pattern file generator
gensprep(8)
compile StringPrep data from files filtered by filterRFC3454.pl
geoProj(3), GeoProj(3), GeoProjAlloc(3), GeoProjInit(3), GeoProjFree(3), GeoProjDestroy(3), GeoProjGetInfo(3), GeoProjGetType(3), GeoProjDescriptor(3), ProjToLatLon(3), LatLonToProj(3), SetCylEqDist(3), SetCylEqArea(3), SetMercator(3), SetLambertConfConic(3), SetLambertEqArea(3), SetStereographic(3), SetOrthographic(3), GeoProjSetRotation(3)
apply cartographic projections to geographic and map coordinates
geography(3), REarth(3), SetREarth(3), BadAngle(3), AngleIsOK(3), AngleIsBad(3), AngleFmDeg(3), AngleToDeg(3), AngleFmRad(3), AngleToRad(3), ISin(3), ICos(3), GeoPtSetDeg(3), GeoPtSetRad(3), GeoPtGetDeg(3), GeoPtGetRad(3), GeoPtIsSomewhere(3), GeoPtIsNowhere(3), GeoPtNowhere(3), MapPtIsSomewhere(3), MapPtIsNowhere(3), MapPtNowhere(3), ScaleMapPt(3), GeoStep(3), GeoDistance(3), GeoQuickDistance(3), Azimuth(3), GCircleX(3), DomainLat(3), DomainLon(3), GwchLon(3), DomainLonPt(3), GwchLonPt(3), LonCmp(3), LatCmp(3), AngleCmp(3), LonBtwn(3), LonBtwn1(3), Rotation(3), NewRotation(3), SetRotation(3), GetRotation(3), DeleteRotation(3), Rotate(3), GeoTime_CalSet(3), GeoTime_JulSet(3), GeoTime_CalToJul(3), GeoTime_JulToCal(3), GeoTime_Incr(3), GeoTime_Cmp(3), GeoTime_Diff(3)
basic geographic calculations and comparisons
geomview(1gv), Geomview(1gv)
interactive geometry viewer
get-edid(1), parse-edid(1)
read-edid tools to retrieve and interpret monitor specifications using the VESA VBE DDC protocol
get-wraster-flags(1)
output libwraster compiler and linker flags (deprecated)
get_cyclecount(9)
get the CPU's fast counter register contents
get_extension(3)
Returns a pointer to the extension of a filename. Allegro game programming library
get_filename(3)
Returns a pointer to the filename portion of a path. Allegro game programming library
get_font_range_begin(3)
Returns the start of a character range in a font. Allegro game programming library
get_font_range_end(3)
Returns the last character of a character range in a font. Allegro game programming library
get_font_ranges(3)
Returns the number of character ranges in a font. Allegro game programming library
get_midi_length(3)
Determines the total playing time of a midi, in seconds. Allegro game programming library
get_rotation_quat(3)
Constructs a quaternion to rotate points around all three axes. Allegro game programming library
get_sound_input_cap_parm(3)
Detects if the specified recording parameters are supported. Allegro game programming library
get_sound_input_cap_stereo(3)
Tells if the input driver is capable of stereo recording. Allegro game programming library
get_vector_rotation_quat(3)
Constructs a quaternion to rotate points around a vector. Allegro game programming library
get_wch(3), wget_wch(3), mvget_wch(3), mvwget_wch(3), unget_wch(3)
get (or push back) a wide character from curses terminal keyboard
get_wch(3x), wget_wch(3x), mvget_wch(3x), mvwget_wch(3x), unget_wch(3x)
get (or push back) a wide character from curses terminal keyboard
get_wstr(3), getn_wstr(3), wget_wstr(3), wgetn_wstr(3), mvget_wstr(3), mvgetn_wstr(3), mvwget_wstr(3), mvwgetn_wstr(3)
get an array of wide characters from a curses terminal keyboard
get_wstr(3x), getn_wstr(3x), wget_wstr(3x), wgetn_wstr(3x), mvget_wstr(3x), mvgetn_wstr(3x), mvwget_wstr(3x), mvwgetn_wstr(3x)
get an array of wide characters from a curses terminal keyboard
get_x_rotate_quat(3), get_y_rotate_quat(3), get_z_rotate_quat(3)
Construct axis rotation quaternions. Allegro game programming library
getcchar(3), setcchar(3)
Get a wide character string and rendition from a cchar_t or set a cchar_t from a wide-character string
getcchar(3x), setcchar(3x)
Get a wide character string and rendition from a cchar_t or set a cchar_t from a wide-character string
getch(3), wgetch(3), mvgetch(3), mvwgetch(3), ungetch(3), has_key(3)
get (or push back) characters from curses terminal keyboard
getch(3x), wgetch(3x), mvgetch(3x), mvwgetch(3x), ungetch(3x), has_key(3x)
get (or push back) characters from curses terminal keyboard
getifaddrs(3)
get interface addresses
getitimer(2), setitimer(2)
get/set value of interval timer
getlofig(3)
give back a pointer to a lofig man1/alc_origin.1
getmail(1)
retrieve messages from one or more POP3, IMAP4, or SDPS mailboxes and deliver to a maildir, mboxrd-format mbox file, or external MDA
getmail_fetch(1)
retrieve messages from one or more POP3 or POP3-over-SSL mailboxes and deliver to a maildir, mboxrd-format mbox file, or external MDA
getmesh(1)
get MeSH terms from a Medline entry
getopt(3)
get option character from command line argument list
getphfig(3)
give back a pointer to a phfig man1/alc_origin.1
getstr(3), getnstr(3), wgetstr(3), wgetnstr(3), mvgetstr(3), mvgetnstr(3), mvwgetstr(3), mvwgetnstr(3)
accept character strings from curses terminal keyboard
getstr(3x), getnstr(3x), wgetstr(3x), wgetnstr(3x), mvgetstr(3x), mvgetnstr(3x), mvwgetstr(3x), mvwgetnstr(3x)
accept character strings from curses terminal keyboard
getty(8)
set terminal mode
gettytab(5)
terminal configuration data base
gfx_mode_select_filter(3)
Even more extended version of the graphics mode selection dialog. Allegro game programming library
ggzcore_h(3), ggzcore.h(3)
The interface for the ggzcore library used by GGZ clients
ggzmod_h(3), ggzmod.h(3)
Common functions for interfacing a game server and GGZ
ght_first(3)
return the first element in the table for iteration
ght_first_keysize(3)
return the first element in the table for iteration
ght_next(3)
return the next element in an iteration
ght_next_keysize(3)
return the next element in an iteration
gif(4)
generic tunnel interface
gifbg(1)
generate a test-pattern GIF
gifcolor(1)
generate color test-pattern GIFs
gifwedge(1)
create a GIF test pattern
gij5(1), gij(1)
GNU interpreter for Java bytecode
gij6(1), gij(1)
GNU interpreter for Java bytecode
ginsh(1)
GiNaC Interactive Shell
git-citool(1)
Graphical alternative to git-commit
git-fast-export(1)
Git data exporter
git-fast-import(1)
Backend for fast Git data importers
git-filter-branch(1)
Rewrite branches
git-grep(1)
Print lines matching a pattern
git-gui(1)
A portable graphical interface to Git
git-ignore(1)
Add .gitignore patterns
git-interpret-trailers(1)
help add structured information into commit messages
git-mailsplit(1)
Simple UNIX mbox splitter program
git-obliterate(1)
rewrite past commits to remove some files
git-parse-remote(1)
Routines to help parsing remote repository access parameters
git-remote-ext(1)
Bridge smart transport to external command
git-rev-parse(1)
Pick out and massage parameters
git-sed(1)
replace patterns in git-controlled files
git-update-index(1)
Register file contents in the working tree to the index
gitaction(1)
GNU Interactive Tools - per file type action script
gitcli(7)
Git command-line interface and conventions
gitdpkgname(1)
GNU Interactive Tools - gitdpkgname helper script
gitfm(1)
GNU Interactive Tools File Manager
gitinternal(1), gitwhich(1), gitmkdirs(1), gitxgrep(1)
Helper programs for gnuit
gitkeys(1)
GNU Interactive Tools - Display key sequence utility
gitmount(1)
GNU Interactive Tools - auto-mount script
gitremote-helpers(1)
Helper programs to interact with remote repositories
gitrgrep(1)
GNU Interactive Tools - recursive grep
gitunpack(1)
GNU Interactive Tools - Unified archive unpacking
gitweb(1)
Git web interface (web frontend to Git repositories)
gitweb.conf(5)
Gitweb (Git web interface) configuration file
glAreTexturesResident(3), "glAreTexturesResident(3)
determine if textures are loaded in texture memory
glColorMaterial(3), "glColorMaterial(3)
cause a material color to track the current color
glColorPointer(3), "glColorPointer(3)
define an array of colors
glEdgeFlagPointer(3), "glEdgeFlagPointer(3)
define an array of edge flags
glGetError(3), "glGetError(3)
return error information
glGetPointerv(3), "glGetPointerv(3)
return the address of the specified pointer
glGetPolygonStipple(3), "glGetPolygonStipple(3)
return the polygon stipple pattern
glIndexPointer(3), "glIndexPointer(3)
define an array of color indexes
glInterleavedArrays(3), "glInterleavedArrays(3)
simultaneously specify and enable several interleaved arrays
glIsList(3), "glIsList(3)
determine if a name corresponds to a display-list
glIsTexture(3), "glIsTexture(3)
determine if a name corresponds to a texture
glLineStipple(3), "glLineStipple(3)
specify the line stipple pattern
glLineWidth(3), "glLineWidth(3)
specify the width of rasterized lines
glNormalPointer(3), "glNormalPointer(3)
define an array of normals
glPointSize(3), "glPointSize(3)
specify the diameter of rasterized points
glPolygonMode(3), "glPolygonMode(3)
select a polygon rasterization mode
glPolygonStipple(3), "glPolygonStipple(3)
set the polygon stippling pattern
glRenderMode(3), "glRenderMode(3)
set rasterization mode
glTexCoordPointer(3), "glTexCoordPointer(3)
define an array of texture coordinates
glVertexPointer(3), "glVertexPointer(3)
define an array of vertex data
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
allow the user to compose an input line
gl_io_mode(3), gl_raw_io(3), gl_normal_io(3), gl_tty_signals(3), gl_abandon_line(3), gl_handle_signal(3), gl_pending_io(3)
How to use gl_get_line() from an external event loop
gl_triangle(3)
draw a triangle with interpolated colors
glacier2router(1)
The Glacier2 router daemon
glade(1)
Create GTK+ user interfaces
glade-previewer(1)
Preview glade user interface definitions
glib-gettextize(1)
gettext internationalization utility
glilypond(1)
integrate lilypond parts into groff co Copyright [co] 2013-2014 Free Software Foundation, Inc. This file is part of glilypond, which is part of GNU groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text is available in the internet at http://%www.gnu.org/%licenses/%gpl-2.0.html . . au This document was written by groff-bernd.warken-72@web.de Bernd Warken . . t .ds EL N'188' .ds EL .|.|.
glknots(6)
generates some twisting 3d knot patterns
glob(3), globfree(3)
generate pathnames matching a pattern
glob(3bobcat), FBB::Glob(3bobcat)
Wrapper around glob(3) to find files matching a pattern
globaltime(1)
International multiclock timeconverter for the Xfce Desktop Environment. It is part of Orage
glsnake(6)
OpenGL enhanced Rubik's Snake cyclewaster
gluNurbsCallbackDataEXT(3), "gluNurbsCallbackDataEXT(3)
set a user data pointer
gluster(8)
Gluster Console Manager (command line utility)
glusterd(8), Glusterd(8)
Gluster elastic volume management daemon
glusterfs(8), GlusterFS(8)
clustered file system
glusterfsd(8), GlusterFS(8)
Clustered Filesystem
glutBitmapCharacter(3)
renders a bitmap character using OpenGL
glutBitmapWidth(3)
returns the width of a bitmap character, glutBitmapLength returns the length of a bitmap font string
glutEnterGameMode(3), glutLeaveGameMode(3)
enters and leaves GLUT's game mode
glutEntryFunc(3)
sets the mouse enter/leave callback for the current window
glutExtensionSupported(3)
helps to easily determine whether a given OpenGL extension is supported
glutIgnoreKeyRepeat(3)
determines if auto repeat keystrokes are reported to the current window
glutMainLoop(3)
enters the GLUT event processing loop
glutReportErrors(3)
for debugging purposes; prints out OpenGL run-time errors
glutStrokeCharacter(3)
renders a stroke character using OpenGL
glutStrokeWidth(3)
returns the width of a stroke character, glutStrokeLength returns the length of a stroke font string
glutTimerFunc(3)
registers a timer callback to be triggered in a specified number of milliseconds
glutWarpPointer(3)
warps the pointer's location
gmic(1)
Perform generic image processing operations, through the G'MIC language interpreter
gmknod(1), mknod(1)
make block or character special files
gml2gv(1), gv2gml(1)
GML-DOT converters
gmx-anadock(1)
Cluster structures from Autodock runs
gmx-cluster(1)
Cluster structures
gmx-clustsize(1)
Calculate size distributions of atomic clusters
gmx-dyndom(1)
Interpolate and extrapolate structure rotations
gmx-filter(1)
Frequency filter trajectories, useful for making smooth movies
gmx-h2order(1)
Compute the orientation of water molecules
gmx-hydorder(1)
Compute tetrahedrality parameters around a given atom
gmx-morph(1)
Interpolate linearly between conformations
gmx-order(1)
Compute the order parameter per atom for carbon tails
gmx-sans(1)
Compute small angle neutron scattering spectra
gmx-saxs(1)
Compute small angle X-ray scattering spectra
gmx-view(1)
View a trajectory on an X-Windows terminal
gmx-wham(1)
Perform weighted histogram analysis after umbrella sampling
gnative2ascii(1)
- An encoding converter
gnome-control-center(1)
Configure GNOME settings
gnome-osd-client(1)
A GNOME OSD shell interface
gnormalize(1)
audio file normalizer and converter
gnuplot(1)
an interactive plotting program
gnutls_crypto_register_aead_cipher(3)
API function
gnutls_crypto_register_cipher(3)
API function
gnutls_crypto_register_digest(3)
API function
gnutls_crypto_register_mac(3)
API function
gnutls_ext_register(3)
API function
gnutls_register_custom_url(3)
API function
gnutls_session_ext_master_secret_status(3)
API function
gnutls_session_ext_register(3)
API function
gnutls_session_get_master_secret(3)
API function
gnutls_session_set_premaster(3)
API function
gnutls_session_supplemental_register(3)
API function
gnutls_supplemental_register(3)
API function
gnutls_system_key_iter_deinit(3)
API function
gnutls_system_key_iter_get_info(3)
API function
gnutls_tpm_get_registered(3)
API function
gnutls_x509_crl_iter_crt_serial(3)
API function
gnutls_x509_crl_iter_deinit(3)
API function
gnutls_x509_crt_set_subject_alternative_name(3)
API function
gnutls_x509_trust_list_iter_deinit(3)
API function
gnutls_x509_trust_list_iter_get_ca(3)
API function
goaccess(1)
fast web log analyzer and interactive viewer
gofer(1), gofc(1)
Gofer programming language interpreter and compiler
gone(1)
a terminal locking utility with many improvements over lock
gosh(1)
a Scheme script interpreter
gperl(1)
groff preprocessor for Perl parts in roff files au This file was written by groff-bernd.warken-72@web.de Bernd Warken . . co Copyright [co] 2014 Free Software Foundation, Inc. This file is part of %gperl , which is part of %groff , a free software project. You can redistribute it and/or modify it under the terms of the "GNU General Public License" as published by the "Free Software Foundation" , version~2. The license text is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . t .ds EL N'188' .ds EL .|.|.
gpo(1)
Text mode interface of gPodder
gpsd(8)
interface daemon for GPS receivers
gptboot(8)
GPT bootcode for UFS on BIOS-based computers
gptzfsboot(8)
GPT bootcode for ZFS on BIOS-based computers
grace(1)
command line interface xmgrace - full-featured GUI mode gracebat - batch mode - print and exit
grantpt(3), ptsname(3), unlockpt(3)
pseudo-terminal access functions
graphml2gv(1)
GRAPHML-DOT converter
grep(1), egrep(1), fgrep(1), rgrep(1)
file pattern searcher
grep(1), egrep(1), fgrep(1), rgrep(1), zgrep(1), zegrep(1), zfgrep(1)
file pattern searcher
grep(1), egrep(1), fgrep(1), zgrep(1), zegrep(1), zfgrep(1), bzgrep(1), bzegrep(1), bzfgrep(1)
print lines matching a pattern
grepcidr(1)
Filter IPv4 and IPv6 addresses matching CIDR patterns
grepjar(1)
search files in a jar file for a pattern
greylist.conf(5)
milter-greylist configuration file
grig(1)
graphical user interface for the Ham Radio Control Libraries (hamlib)
groff_filenames(7)
filename extensions for roff and groff co Copyright [co] 2013-2014 Free Software Foundation, Inc. This file is part of groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation (FSF). The license text can be found in the internet at http://www.gnu.org/licenses . . au This file was written by groff-bernd.warken-72@web.de Bernd Warken
groff_hdtbl(7)
groff `hdtbl' macros for generation of tables co Copyright [co] 2005-2014 Free Software Foundation, Inc. This file is part of groff, the groff. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with the Invariant Sections being this .ig-section and AUTHORS, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the Free Documentation License is included as a file called FDL in the main directory of the groff source package. . au This document was written by Joachim.Walsdorff@urz.uni-heidelberg.de Joachim Walsdorff . . Some simple formatting macros. Note that we use `.ig' here and not a comment to make `mandb' 2.4.1 (and probably more recent versions also) happy; otherwise the `.char' lines and the stuff which follows is included in the `whatis' database. . [lB] F[n[.fam]][ [rB] F[n[.fam]]] [or] F[n[.fam]]||| [ell] F[n[.fam]].|.|. [oq] F[n[.fam]][oq] [cq] F[n[.fam]][cq] F CR {
groff_out(5)
groff intermediate output format
grolbp(1)
groff driver for Canon CAPSL printers (LBP-4 and LBP-8 series laser printers)
gropdf(1)
PDF driver for groff co Copyright [co] 2011-2014 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English. . Tp ie
grotty(1)
groff driver for typewriter-like devices
gs(1)
Ghostscript (PostScript and PDF language interpreter and previewer)
gs-pcl3(1), pcl3(1)
ghostscript device driver for printers understanding PCL 3+
gsasl(1)
SASL library command line interface
gsasl_register(3)
API function
gsasl_server_callback_external_get(3)
API function
gsasl_server_callback_external_set(3)
API function
gsi(1)
Gambit Scheme Interpreter and Compiler
gslp(1)
Format and print text using ghostscript gsbj - Format and print text for BubbleJet printer using ghostscript gsdj - Format and print text for DeskJet printer using ghostscript gsdj500 - Format and print text for DeskJet 500 BubbleJet using ghostscript gslj - Format and print text for LaserJet printer using ghostscript
gss(1)
Generic Security Service command line interface
gss_accept_sec_context(3), gss_acquire_cred(3), gss_add_cred(3), gss_add_oid_set_member(3), gss_canonicalize_name(3), gss_compare_name(3), gss_context_time(3), gss_create_empty_oid_set(3), gss_delete_sec_context(3), gss_display_name(3), gss_display_status(3), gss_duplicate_name(3), gss_export_name(3), gss_export_sec_context(3), gss_get_mic(3), gss_import_name(3), gss_import_sec_context(3), gss_indicate_mechs(3), gss_init_sec_context(3), gss_inquire_context(3), gss_inquire_cred(3), gss_inquire_cred_by_mech(3), gss_inquire_mechs_for_name(3), gss_inquire_names_for_mech(3), gss_krb5_ccache_name(3), gss_krb5_compat_des3_mic(3), gss_krb5_copy_ccache(3), gss_krb5_import_cred gsskrb5_extract_authz_data_from_sec_context(3), gsskrb5_register_acceptor_identity(3), gss_krb5_import_ccache(3), gss_krb5_get_tkt_flags(3), gss_process_context_token(3), gss_release_buffer(3), gss_release_cred(3), gss_release_name(3), gss_release_oid_set(3), gss_seal(3), gss_sign(3), gss_test_oid_set_member(3), gss_unseal(3), gss_unwrap(3), gss_verify(3), gss_verify_mic(3), gss_wrap(3), gss_wrap_size_limit(3)
Generic Security Service Application Program Interface library
gss_canonicalize_name(3)
Convert an internal name to an MN
gss_compare_name(3)
Compare two internal-form names
gss_context_time(3)
Determine for how long a context will remain valid
gss_display_name(3)
Convert internal-form name to text
gss_duplicate_name(3)
Create a copy of an internal name
gss_import_name(3)
Convert a contiguous string name to internal-form
gss_indicate_mechs(3)
Determine available underlying authentication mechanisms
gss_release_name(3)
Discard an internal-form name
gss_test_oid_set_member(3)
Determines whether an object identifier is a member of a set
gss_wrap_size_limit(3)
Determine maximum message sizes
gst-convert(1)
Smalltalk syntax converter and beautifier
gtags-cscope(1)
interactively examine a C program
gtcli(1)
Command-line interface for Getting Things GNOME!
gtester(1)
test running utility
gtester-report(1)
test report formatting utility
gti(6)
Humorous typo-based git runner; drives a car over the terminal
gtksql(1), GtkSQL(1)
SQL database interface
guessextdir(3)
guess external connectors directions from internal connectors directions man1/alc_origin.1
gui_mouse_focus(3)
Tells if the input focus follows the mouse pointer. Allegro game programming library
gutenfetch_free_servers(3)
-- This function frees a NULL terminated array of gutenfetch_server_t *. This is primarily for cleaning up the returned result from gutenfetch_list_servers(3)
gutenfetch_is_threadsafe(3)
-- Determine whether the gutenfetch library is thread-safe or not
gutenfetch_set_active_server(3)
-- This function sets the default Gutenberg server used to satisfy requests. Instead of taking a gutenfetch_server_t * to set the server, it takes a NULL-terminated URL such as "ftp://ibiblio.org/pub/docs/books/gutenberg/". The url should contain a protocol supported by CURL a valid hostname and a directory to the base of the gutenberg texts
gvmap(1)
find clusters and create a geographical map highlighting clusters
gvpr(1)
graph pattern scanning and processing language
gvpr(3), libgvpr(3)
library for graph filtering
gwsetup(1)
Interactive interface to Geneweb databases management
gxditview(1)
display groff intermediate output files co Copyright [co] 1989, Massachusetts Institute of Technology. See X (7) for a full statement of rights and permissions. . au Keith Packard (MIT X Consortium) Richard L. Hyde (Purdue) David Slattengren (Berkeley) Malcolm Slaney (Schlumberger Palo Alto Research) Mark Moraes (University of Toronto) James Clark
gxl2gv(1), gv2gxl(1)
GXL-GV converters
hal-is-caller-locked-out(1)
determine if a caller is locked out
hal-is-caller-privileged(1)
determine if a caller is privileged
hal-lock(1)
lock an interface
halftone(6)
simple halftone pattern of moving mass points
halo(6)
draw circular patterns
has_mouse(3), getmouse(3), ungetmouse(3), mousemask(3), wenclose(3), mouse_trafo(3), wmouse_trafo(3), mouseinterval(3)
mouse interface through curses
has_mouse(3x), getmouse(3x), ungetmouse(3x), mousemask(3x), wenclose(3x), mouse_trafo(3x), wmouse_trafo(3x), mouseinterval(3x)
mouse interface through curses
hash_initialise(3), hash_insert(3), hash_retrieve(3), hash_delete(3), hash_iterator_initialise(3), hash_fetch_next(3), hash_iterator_deinitialise(3), hash_deinitialise(3)
hash table manipulation functions
hashcash(1)
hashcash anti-spam / denial of service counter-measure tool
hashdig-filter(1), hashdig-filter.pl(1)
Filter filenames by directory type
hastmon(8)
cluster monitoring daemon
hatm(4)
device driver for Fore/Marconi HE155 and HE622 ATM interfaces
hatop(1), HATop(1)
interactive ncurses client for haproxy
hb_addnode(1)
hb_addnode is a simple linux-ha shell script. It sends a message to the cluster to add new nodes
hb_delnode(1)
hb_delnode is a simple linux-ha shell script. It sends a message to the cluster to delete nodes
hb_report(8)
create report for CRM based clusters (Pacemaker)
hconsole(1)
Interactive Python console for using Hatari's remote API
hcs12mem(1)
Freescale S12 MCU family memory reader/writer
hdf_obj_top(3), hdf_obj_top (3)
Return the pointer to the top dataset node
hdf_register_fileload(3), hdf_register_fileload (3)
register a fileload function
heim_ntlm_build_ntlm1_master(3), Heimdal(3)
NTLM library
heimbase(3)
Heimbase Registers a DB type for use with heim_db_create(). Registers a DB type for use with heim_db_create(). heim_db_register Parameters: dbtype Name of DB type data Private data argument to the dbtype's openf method plugin Structure with DB type methods (function pointers) Backends that provide begin/commit/rollback methods must provide ACID semantics. The registered DB type will have ACID semantics for backends that do not provide begin/commit/rollback methods but do provide lock/unlock and rdjournal/wrjournal methods (using a replay log journalling scheme). If the registered DB type does not natively provide read vs. write transaction isolation but does provide a lock method then the DB will provide read/write transaction isolation. Returns: ENOMEM on failure, else 0. Open a database of the given dbtype. Database type names can be composed of one or more pseudo-DB types and one concrete DB type joined with a '+' between each. For example: 'transaction+bdb' might be a Berkeley DB with a layer above that provides transactions. Options may be provided via a dict (an associative array). Existing options include: "(bu" 2 'create', with any value (create if DB doesn't exist) "(bu" 2 'exclusive', with any value (exclusive create) "(bu" 2 'truncate', with any value (truncate the DB) "(bu" 2 'read-only', with any value (disallow writes) "(bu" 2 'sync', with any value (make transactions durable) "(bu" 2 'journal-name', with a string value naming a journal file name Parameters: dbtype Name of DB type dbname Name of DB (likely a file path) options Options dict db Output open DB handle error Output error object Returns: a DB handle Clone (duplicate) an open DB handle. This is useful for multi-threaded applications. Applications must synchronize access to any given DB handle. Returns EBUSY if there is an open transaction for the input db. Parameters: db Open DB handle error Output error object Returns: a DB handle Open a transaction on the given db. Parameters: db Open DB handle error Output error object Returns: 0 on success, system error otherwise Commit an open transaction on the given db. Parameters: db Open DB handle error Output error object Returns: 0 on success, system error otherwise Rollback an open transaction on the given db. Parameters: db Open DB handle error Output error object Returns: 0 on success, system error otherwise Get type ID of heim_db_t objects. Lookup a key's value in the DB. Returns 0 on success, -1 if the key does not exist in the DB, or a system error number on failure. Parameters: db Open DB handle key Key error Output error object Returns: the value (retained), if there is one for the given key Set a key's value in the DB. Parameters: db Open DB handle key Key value Value (if NULL the key will be deleted, but empty is OK) error Output error object Returns: 0 on success, system error otherwise Delete a key and its value from the DB Parameters: db Open DB handle key Key error Output error object Returns: 0 on success, system error otherwise Iterate a callback function over keys and values from a DB. Parameters: db Open DB handle iter_data Callback function's private data iter_f Callback function, called once per-key/value pair error Output error object Get a node in a heim_object tree by path Parameters: ptr tree error error (output) ap NULL-terminated va_list of heim_object_ts that form a path Returns: object (not retained) if found Get a node in a tree by path, with retained reference Parameters: ptr tree error error (output) ap NULL-terminated va_list of heim_object_ts that form a path Returns: retained object if found Get a node in a tree by path Parameters: ptr tree error error (output) ... NULL-terminated va_list of heim_object_ts that form a path Returns: object (not retained) if found Get a node in a tree by path, with retained reference Parameters: ptr tree error error (output) ... NULL-terminated va_list of heim_object_ts that form a path Returns: retained object if found Create a path in a heim_object_t tree Parameters: ptr the tree size the size of the heim_dict_t nodes to be created leaf leaf node to be added, if any error error (output) ap NULL-terminated of path component objects Create a path of heim_dict_t interior nodes in a given heim_object_t tree, as necessary, and set/replace a leaf, if given (if leaf is NULL then the leaf is not deleted). Returns: 0 on success, else a system error Create a path in a heim_object_t tree Parameters: ptr the tree size the size of the heim_dict_t nodes to be created leaf leaf node to be added, if any error error (output) ... NULL-terminated list of path component objects Create a path of heim_dict_t interior nodes in a given heim_object_t tree, as necessary, and set/replace a leaf, if given (if leaf is NULL then the leaf is not deleted). Returns: 0 on success, else a system error Delete leaf node named by a path in a heim_object_t tree Parameters: ptr the tree error error (output) ap NULL-terminated list of path component objects Dump a heimbase object to stderr (useful from the debugger!) Parameters: obj object to dump using JSON or JSON-like format
helix(6)
draw helical string-art patterns
heroes(6), Heroes(6)
a game like Nibbles or Tron, just better
herrie(1)
interactive music playlist player
hesiod(3), hesiod_init(3), hesiod_resolve(3), hesiod_free_list(3), hesiod_to_bind(3), hesiod_end(3)
Hesiod name server interface library
heyu(1), Heyu^(1)
a control program for the X-10 CM11A serial interface
hf(1), ef(1), nf(1), pf(1)
address to name filters
hfst-compose-intersect(1)
=Compose a lexicon with one or more rule transducers
hfst-conjunct(1)
=Conjunct (intersect, AND) two transducers
hfst-determinize(1)
=Determinize a transducer
hfst-format(1)
=determine HFST transducer format
hfst-grep(1)
=Search for PATTERN in each FILE or standard input
hfst-xfst(1)
=Compile XFST scripts or execute XFST commands interactively
hhook(9), hhook_head_register(9), hhook_head_deregister(9), hhook_head_deregister_lookup(9), hhook_run_hooks(9), HHOOKS_RUN_IF(9), HHOOKS_RUN_LOOKUP_IF(9)
Helper Hook Framework
highlight(1), Highlight(1)
a universal sourcecode to formatted text converter
hlmaster(1), "hlmaster" "(1)
A Half-Life master server daemon (made in switzerland)"
hlmaster.filter(1), "hlmaster.filter" "(1)
How to allow/block specific gameservers."
hlmaster.gameserver(1), "hlmaster.gameserver" "(1)
How to configure your gameserver to send heartbeats to hlmaster."
hlmaster.list(1), "hlmaster.list" "(1)
How to load your own list of gameservers."
hme(4)
Sun Microelectronics STP2002-STQ Ethernet interfaces device driver
hmsa(1)
Atari MSA / ST disk image creator and converter
holotz-castle(6)
platform game with high dosis of mistery
hope(1)
a lazy interpreter for the functional language Hope
hostapd_cli(1)
hostapd command-line interface
hostapd_cli(8)
text-based frontend program for interacting with hostapd(8)
hotkeys(1)
A hotkeys daemon for your Internet/multimedia keyboard in X
hp2xx(1)
A HPGL converter into some vector- and raster formats
hpi_shell(1)
An openhpi sample application that allows a user to interactively perform a number of HPI operations
hpithres(1)
This sample openhpi application interactively displays sensors and sensor info
hptnr(4)
HighPoint DC Series Data Center HBA card driver
html2text(1)
an advanced HTML-to-text converter
htop(1)
interactive process viewer
httpd_cgi(7)
Common Gateway Interface (CGI) for xs-httpd
hugo-convert-toJSON(1)
Convert front matter to JSON
hugo-convert-toTOML(1)
Convert front matter to TOML
hugo-convert-toYAML(1)
Convert front matter to YAML
hunt(6)
a multi-player multi-terminal game
hunter-seeker.pl(8)
A perl script that compares a list of usernames and MD5 sums output by digestion.pl(1) to the passwd database
hwlocality_cuda(3)
Interoperability with the CUDA Driver API
hwlocality_cudart(3)
Interoperability with the CUDA Runtime API
hwlocality_gl(3)
Interoperability with OpenGL displays
hwlocality_glibc_sched(3)
Interoperability with glibc sched affinity
hwlocality_intel_mic(3)
Interoperability with Intel Xeon Phi (MIC)
hwlocality_linux_libnuma_bitmask(3)
Interoperability with Linux libnuma bitmask
hwlocality_linux_libnuma_ulongs(3)
Interoperability with Linux libnuma unsigned long masks
hwlocality_myriexpress(3)
Interoperability with Myrinet Express
hwlocality_nvml(3)
Interoperability with the NVIDIA Management Library
hwlocality_opencl(3)
Interoperability with OpenCL
hwlocality_openfabrics(3)
Interoperability with OpenFabrics
hwpmc(4)
Hardware Performance Monitoring Counter support
hwstat(1), HWSTAT(1)
command line tool to display CPU temp and battery infos
hxuncdata(1)
replace CDATA sections by character entities
hxunent(1)
replace HTML predefined character entities by UTF-8
hydra_nameserver(1)
Internal executable used by Hydra
hydra_persist(1)
Internal executable used by Hydra
hydra_pmi_proxy(1)
Internal exectuable used by Hydra
hypervisor_mode(7)
allows you to run simultaneously many virtual router instances, and to simulate ATM, Ethernet or Frame(hyRelay networks
hypnowheel(6)
draws overlapping, translucent spiral patterns
i3-input(1)
interactively take a command for i3 window manager
i3-sensible-terminal(1)
launches $TERMINAL with fallbacks
i7z(1)
A better i7 (and now i3, i5) reporting tool
iauth(8)
The Internet Relay Chat Authentication Program
iauth.conf(5)
The Internet Relay Chat Authentication Configuration File
ibase64streambuf(3bobcat), FBB::IBase64Streambuf(3bobcat)
Input Filtering stream buffer doing base64 conversion
ibnd_iter_nodes(3), ibnd_iter_nodes_type(3)
given a fabric object and a function itterate over the nodes in the fabric
ibp(1)
show which of the International Beacon Project beacons is transmitting
ibv_reg_mr(3), ibv_dereg_mr(3)
register or deregister a memory region (MR)
ibv_rereg_mr(3)
re-register a memory region (MR)
ichwd(4)
device driver for the Intel ICH watchdog interrupt timer
ici(1)
ICI programming language interpreter
ick(1)
INTERCAL compiler
icmp(4)
Internet Control Message Protocol
icmp6(4)
Internet Control Message Protocol for IPv6
icmpinfo(1)
interpret ICMP messages
iconv_canonicalize(3)
resolving character encoding names to canonical form
iconv_close(3)
charset converter deallocation function
iconv_open(3)
charset converter allocation function
iconvlist(3)
retrieving a list of character encodings supported by iconv(3)
icpld(1)
Internet Connection Performance Logging Daemon
identify(1)
describes the format and characteristics of one or more image files
identity_quat(3)
Global variable containing the identity quaternion. Allegro game programming library
idevicebackup2(1)
Create or restore backups for devices running iOS 4 or later
idevicedebug(1)
Interact with the debugserver service of a device
idevicediagnostics(1)
Interact with the diagnostics interface of a device
ideviceenterrecovery(1)
Make a device enter recovery mode
ideviceimagemounter(1)
Mount disk images on the device
idjc(1)
Be a dj on the internet
idn(1)
Internationalized Domain Names command line tool
idn2_register_u8(3)
API function
idn2_register_ul(3)
API function
idn_checkname(3)
validate an internationalized domain name
idn_comparenames(3), idn_decodename2(3)
compare two internationzalized domain names
idn_decodename(3), idn_decodename2(3)
decode an internationalized domain name
idn_encodename(3)
encode an internationalized domain name
idncheck(1)
check an internationalized domain name
idncmp(1)
compare internationalized domain names
idnconv(1)
codeset converter for named.conf and zone master files
idnconv2(1)
internationalized domain name converter
if_ipsec(4)
IPsec virtual tunneling interface
if_nametoindex(3), if_indextoname(3), if_nameindex(3), if_freenameindex(3)
provide mappings between interface names and indexes
if_ntb(4)
Virtual Ethernet interface for Non-Transparent Bridges
if_util(3)
system networking interface utility routines
ifconfig(8)
configure network interface parameters
ifdata(1)
get network interface info without parsing ifconfig output
ifdepd(8)
Interface Dependancy daemon
ifile(1)
core executable for the ifile mail filtering system
ifilterstreambuf(3bobcat), FBB::IFilterStreambuf(3bobcat)
Filtering stream buffer initialized by a std::istream object
iflib(4)
Network Interface Driver Framework
iflib(9)
Network Interface Driver Framework
ifm(1), IFM(1)
Interactive Fiction Mapper
ifmcstat(8)
dump multicast group management statistics per interface
ifmib(4)
Management Information Base for network interfaces
ifnet(9), ifaddr(9), ifqueue(9), if_data(9)
kernel interfaces for manipulating network interfaces
ifs(6)
draws spinning, colliding iterated-function-system images
ifstat(1)
Report InterFace STATistics
ifstated(8)
Interface State daemon
ifstated.conf(5)
Interface State daemon configuration file
iftop(8)
display bandwidth usage on an interface by host
igb(4)
Intel(R) PRO/1000 PCI Express Gigabit Ethernet adapter driver
igeomap(n)
create and manipulate a geographic map with interactive menus and bindings
igmp(4)
Internet Group Management Protocol
igmpproxy(8)
Multicast router utilizing IGMP forwarding
ikec(1)
Internet Key Exchange Connect
iked(8)
Internet Key Exchange protocol daemon
iked.conf(5), iked(5)
Internet Key Exchange version 2 (IKEv2) daemon
imake(1)
C preprocessor interface to the make utility
imapd(8), IMAPd(8)
Internet Message Access Protocol server
imapfilter(1)
mail filter
imapfilter_config(5)
imapfilter configuration file
imerge(1)
help merge one file to another interactively
img-gif(n)
Img, Graphics Interchange Format (gif)
img-sun(n)
Img, Sun Raster Format (sun)
img2sixel(1)
image converter to DEC SIXEL graphics
imgvinfo(1)
extract and display interesting things from a Pilot Image Viewer pdb header, version 2.0
imgvtopnm(1)
Pilot Image Viewer pdb to PGM/PBM converter, version 2.0
imwheel(1)
a mouse wheel and stick interpreter for X Windows
in_wch(3), mvin_wch(3), mvwin_wch(3), win_wch(3)
extract a complex character and rendition from a window
in_wch(3x), mvin_wch(3x), mvwin_wch(3x), win_wch(3x)
extract a complex character and rendition from a window
in_wchstr(3), in_wchnstr(3), win_wchstr(3), win_wchnstr(3), mvin_wchstr(3), mvin_wchnstr(3), mvwin_wchstr(3), mvwin_wchnstr(3)
get an array of complex characters and renditions from a curses window
in_wchstr(3x), in_wchnstr(3x), win_wchstr(3x), win_wchnstr(3x), mvin_wchstr(3x), mvin_wchnstr(3x), mvwin_wchstr(3x), mvwin_wchnstr(3x)
get an array of complex characters and renditions from a curses window
incbddrefext(3)
increments the external reference of a bdd node. man1/alc_origin.1
incbddrefint(3)
increments the internal reference of a bdd node. man1/alc_origin.1
inch(3), winch(3), mvinch(3), mvwinch(3)
get a character and attributes from a curses window
inch(3x), winch(3x), mvinch(3x), mvwinch(3x)
get a character and attributes from a curses window
inchstr(3), inchnstr(3), winchstr(3), winchnstr(3), mvinchstr(3), mvinchnstr(3), mvwinchstr(3), mvwinchnstr(3)
get a string of characters (and attributes) from a curses window
inchstr(3x), inchnstr(3x), winchstr(3x), winchnstr(3x), mvinchstr(3x), mvinchnstr(3x), mvwinchstr(3x), mvwinchnstr(3x)
get a string of characters (and attributes) from a curses window
includeres(1)
filter to include resources in a PostScript document
index(3), rindex(3)
locate character in string
inet(4)
Internet protocol family
inet6(4)
Internet protocol version 6 family
inet_aton(3), inet_addr(3), inet_network(3), inet_ntoa(3), inet_ntoa_r(3), inet_ntop(3), inet_pton(3), inet_makeaddr(3), inet_lnaof(3), inet_netof(3)
Internet address manipulation routines
inet_net_ntop(3), inet_net_pton(3)
Internet network number manipulation routines
inetd(8)
internet super-server
inetd.conf(5), inetd(5)
internet super-server
infocmp(1m)
compare or print out terminfo descriptions
infotocap(1m)
convert a terminfo description into a termcap description
initdb(1)
create a new PostgreSQL database cluster
initscr(3), newterm(3), endwin(3), isendwin(3), set_term(3), delscreen(3)
curses screen initialization and manipulation routines
initscr(3x), newterm(3x), endwin(3x), isendwin(3x), set_term(3x), delscreen(3x)
curses screen initialization and manipulation routines
injail(8)
determine if a process is running in a jail
inn.conf(5)
Configuration data for InterNetNews programs
innconfval(1)
Get configuration parameters from inn.conf
innd(8)
InterNetNews daemon
inndcomm(3)
INND communication part of InterNetNews library
inplace(1)
edits files in-place through given filter commands
ins_wch(3), mvins_wch(3), mvwins_wch(3), wins_wch(3)
insert a complex character and rendition into a window
ins_wch(3x), mvins_wch(3x), mvwins_wch(3x), wins_wch(3x)
insert a complex character and rendition into a window
ins_wstr(3), ins_nwstr(3), wins_wstr(3), wins_nwstr(3), mvins_wstr(3), mvins_nwstr(3), mvwins_wstr(3), mvwins_nwstr(3)
insert a wide-character string into a curses window
ins_wstr(3x), ins_nwstr(3x), wins_wstr(3x), wins_nwstr(3x), mvins_wstr(3x), mvins_nwstr(3x), mvwins_wstr(3x), mvwins_nwstr(3x)
insert a wide-character string into a curses window
insch(3), winsch(3), mvinsch(3), mvwinsch(3)
insert a character before cursor in a curses window
insch(3x), winsch(3x), mvinsch(3x), mvwinsch(3x)
insert a character before cursor in a curses window
install-sid(8)
update SUBMITTER variable in site or personal config files
install_keyboard(3)
Installs the Allegro keyboard interrupt handler
install_param_int(3)
Installs a timer routine with a customizable parameter. Allegro game programming library
install_param_int_ex(3)
Adds or modifies a timer with a customizable parameter. Allegro game programming library
install_timer(3)
Installs the Allegro timer interrupt handler
installer(8)
Archiveopteryx installer
instead(6), INSTEAD(6)
Simple Text Adventure Engine, The Interpreter
instr(3), innstr(3), winstr(3), winnstr(3), mvinstr(3), mvinnstr(3), mvwinstr(3), mvwinnstr(3)
get a string of characters from a curses window
instr(3x), innstr(3x), winstr(3x), winnstr(3x), mvinstr(3x), mvinnstr(3x), mvwinstr(3x), mvwinnstr(3x)
get a string of characters from a curses window
int-ext-fields(3)
SiLK plug-in providing internal/external ip/port fields
interaggregate(6)
Visualize the momentary and aggregate intersections between slowly moving circles
interbench(8)
-benchmark application designed to benchmark interactivity in Unix-like systems
interdiff(1)
show differences between two diff files
interference(6)
decaying sinusoidal waves
intermomentary(6)
Visualize the momentary and aggregate intersections between slowly moving circles
internal_v_smechname(3)
Internal names and mechanism names
intersectbddnode(3)
tests for an intersection between two bdd nodes. man1/alc_origin.1
intro(9)
introduction to system kernel interfaces
inwstr(3), innwstr(3), winwstr(3), winnwstr(3), mvinwstr(3), mvinnwstr(3), mvwinwstr(3), mvwinnwstr(3)
get a string of wchar_t characters from a curses window
inwstr(3x), innwstr(3x), winwstr(3x), winnwstr(3x), mvinwstr(3x), mvinnwstr(3x), mvwinwstr(3x), mvwinnwstr(3x)
get a string of wchar_t characters from a curses window
ip(4)
Internet Protocol
ip6(4)
Internet Protocol version 6 (IPv6) network layer
ipcs(1)
report System V interprocess communication facilities status
ipf(4)
packet filtering kernel interface
ipf(5), ipf.conf(5)
IPFilter firewall rules file format
ipf(8)
alters packet filtering lists for IP packet input and output
ipfilter(4)
Introduction to IP packet filtering
ipfilter(5), IP(5)
Filter
ipfmeta(1)
use objects in IPfilter files
ipfstat(8)
reports on packet filter statistics and filter list
ipftest(1)
test packet filter rules with arbitrary input
ipfw(4)
IP packet filter and traffic accounting
ipfw(8)
User interface for firewall, traffic shaper, packet scheduler, in-kernel NAT
ipmi(4)
OpenIPMI compatible IPMI interface driver
ipmi-pet(8), IPMI(8)
IPMI Platform Event Trap Interpreter
ipmi_cmdlang(7)
A command language interface to the IPMI library
ipmi_lan(5), ipmi/lan.conf(5)
IPMI LAN Interface config file
ipmi_ui(1)
Crude interface to an IPMI system
ipmidetect(8)
list detected and/or undetected IPMI interfaces in a cluster
ipmidetect.conf(5)
specify alternate default values for the ipmidetect library
ipmilan(8)
IPMI LAN to System Interface Converter
ipnat(4)
Network Address Translation kernel interface
ipnat(5), ipnat.conf(5)
IPFilter NAT file format
ipnat(8)
user interface to the NAT subsystem
ippfind(1)
find internet printing protocol printers
ippool(8)
user interface to the IPFilter pools
iprop(8), ipropd-master(8), ipropd-slave(8)
propagate changes to a Heimdal Kerberos master KDC to slave KDCs
iprop(8), ipropd-master(8), ipropd-slave(8)
propagate transactions from a Heimdal Kerberos master KDC to slave KDCs
ipsec(4)
Internet Protocol Security protocol
ipsvd(7)
Internet protocol service daemon
ipv6logconv(8)
HTTP server log file converter for statistics
ipython(1)
Tools for Interactive Computing in Python
irb22(1), irb(1)
Interactive Ruby Shell
irb23(1), irb(1)
Interactive Ruby Shell
irb24(1), irb(1)
Interactive Ruby Shell
ircII(1)
interface to the Internet Relay Chat system
ircd(8)
The IRCD-Hybrid Internet Relay Chat server
ird(8)
MICO interface repository server
irrd(8)
stand-alone Internet Routing Registry database
is_term_resized(3), resize_term(3), resizeterm(3)
change the curses terminal size
is_term_resized(3x), resize_term(3x), resizeterm(3x)
change the curses terminal size
isalnum(3)
alphanumeric character test
isalpha(3)
alphabetic character test
isascii(3)
test for ASCII character
isblank(3)
space or tab character test
isck(3)
-tells if a name is the pattern defined by the user man1/alc_origin.1
iscntrl(3)
control character test
isdigit(3), isnumber(3)
decimal-digit character test
iselect(1), iSelect(1)
-- Interactive Selection Tool
isgraph(3)
printing character test (space character exclusive)
isgreater(3), isgreaterequal(3), isless(3), islessequal(3), islessgreater(3), isunordered(3)
compare two floating-point numbers
isideogram(3)
ideographic character test
isl(4)
Intersil(TM) I2C ISL29018 sensor driver
islower(3)
lower-case character test
iso8601(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
isoboot(8)
Boot code for hybrid ISO/USB images on BIOS-based computers
isomaster(1)
an ISO image editor
isp(4)
Qlogic based SPI and FibreChannel SCSI Host Adapters
ispfw(4)
Firmware for Qlogic based SPI and FibreChannel SCSI Host Adapters
isphonogram(3)
phonographic character test
isprint(3)
printing character test (space character inclusive)
ispunct(3)
punctuation character test
isql(1), iusql(1)
unixODBC command-line interactive SQL tool
isrune(3)
valid character test
isspace(3)
white-space character test
isspecial(3)
special character test
isupper(3)
upper-case character test
isvdd(3)
-tells if a name contains the pattern defined by the user man1/alc_origin.1
isvss(3)
-tells if a name contains the pattern defined by the user man1/alc_origin.1
iswalnum(3), iswalpha(3), iswascii(3), iswblank(3), iswcntrl(3), iswdigit(3), iswgraph(3), iswhexnumber(3), iswideogram(3), iswlower(3), iswnumber(3), iswphonogram(3), iswprint(3), iswpunct(3), iswrune(3), iswspace(3), iswspecial(3), iswupper(3), iswxdigit(3)
wide character classification utilities
iswalnum_l(3), iswalpha_l(3), iswcntrl_l(3), iswctype_l(3), iswdigit_l(3), iswgraph_l(3), iswlower_l(3), iswprint_l(3), iswpunct_l(3), iswspace_l(3), iswupper_l(3), iswxdigit_l(3), towlower_l(3), towupper_l(3), wctype_l(3), iswblank_l(3), iswhexnumber_l(3), iswideogram_l(3), iswnumber_l(3), iswphonogram_l(3), iswrune_l(3), iswspecial_l(3), nextwctype_l(3), towctrans_l(3), wctrans_l(3)
wide character classification utilities
iswctype(3), wctype(3)
wide character class functions
isxdigit(3), ishexnumber(3)
hexadecimal-digit character test
isymcryptstreambuf(3bobcat), FBB::ISymCryptStreambuf(3bobcat)
Input Filtering stream buffer doing symmetric encryption
isympy(1)
interactive shell for SymPy
iterator(3bobcat), FBB::Iterator(3bobcat)
Iterator returning plain values when dereferenced FBB::ReverseIterator - reverse_iterator for FBB::Iterator
ithread_add_handler(9), ithread_create(9), ithread_destroy(9), ithread_priority(9), ithread_remove_handler(9), ithread_schedule(9)
kernel interrupt threads
iv_fd_register(3), iv_fd_register_try(3), iv_fd_unregister(3), iv_fd_registered(3), iv_fd_set_handler_in(3), iv_fd_set_handler_err(3), iv_fd_set_handler_out(3)
deal with ivykis file descriptors
iv_main(3)
enter the ivykis main loop
iv_task_register(3), iv_task_unregister(3), iv_task_registered(3)
deal with ivykis tasks
iv_timer_register(3), iv_timer_unregister(3), iv_timer_registered(3)
deal with ivykis timers
iv_tls_user_register(3), iv_tls_user_ptr(3)
thread-local storage handling for ivykis modules
ivview(1)
fast, interactive 3D viewer of Inventor files
j-jconsole(1), jconsole(1)
command line J interpreter
jackhmmer(1)
iteratively search sequence(s) against a protein database
jaildaemon(1)
A fixed command-line interface for FreeBSD jails to their host system
jamin(1)
JACK Audio Mastering interface
japana(1)
HTTP proxy converting Japanese characters into ASCII
jasper(1)
File format converter specialized in JPEG-2000 encoding
jbgtopbm(1)
JBIG1 to portable bitmap file converter
jbig2dec(1)
File format converter specialized in JBIG2 decoding
jerm(1)
communication terminal through serial and TCP/IP interfaces
jgraph(1)
filter for graph plotting to postscript
jmanpath(1)
determine user's search path for Japanese man pages
jove(1)
an interactive display-oriented text editor
junkbuster(1)
The Internet Junkbuster Proxy (TM)+2
juyin-learn(1)
show Chinese characters' phonations
jx(1)
Wrapper to jexec(8) with more feature in interpreting jail id
kajaani-kombat(6), Kajaani Kombat(6)
a multiplayer internet-playable Rampart clone set in space
kakasi(1), KAKASI(1)
Kanji kana simple inverter (between Kanji, both Kana and Romaji)
kbanner(1)
display kanji files in large letters
kccachetest(1)
command line interface to test the cache hash database
kcdirmgr(1)
command line interface to manage the directory hash database
kcdirtest(1)
command line interface to test the directory hash database
kcforestmgr(1)
command line interface to manage the directory tree database
kcforesttest(1)
command line interface to test the directory tree database
kcgrasstest(1)
command line interface to test the cache tree database
kchashmgr(1)
command line interface to manage the file hash database
kchashtest(1)
command line interface to test the file hash database
kclangctest(1)
command line interface to test the C language binding
kcookiejar5(8)
Command line interface to the KDE HTTP cookie daemon
kcpolymgr(1)
command line interface to manage the polymorphic database
kcpolytest(1)
command line interface to test the polymorphic database
kcprototest(1)
command line interface to test the prototype database
kcstashtest(1)
command line interface to test the stash database
kctreemgr(1)
command line interface to manage the file tree database
kctreetest(1)
command line interface to test the file tree database
kcutilmgr(1)
command line interface of miscellaneous utilities
kcutiltest(1)
command line interface to test the utility functions
kdigest(8)
userland tool to access digest interface in the KDC
kdrill(1), kdrill v6.2(1)
drill program for kanji chars under Xwindows (X11R5 or better is required to run) kdrill also does dictionary lookup Yikes.. this man-page is getting huge. But I am a great believer in having proper documentation. Hopefully, this new format will help instead of hinder. At some future point in time, I shall convert this huge beast to HTML. But that point is not now. [Although actually, you CAN go to http://www.bolthole.com/kdrill/ for some help ] TIP: "/WORD" usually takes you to the next occurrence of "WORD", if you are viewing this using a "man"-like program
ken(1), b1ff(1), censor(1), chef(1), cockney(1), eleet(1), fanboy(1), fudd(1), jethro(1), jibberish(1), jive(1), kenny(1), kraut(1), ky00te(1), nethackify(1), newspeak(1), nyc(1), pirate(1), rasterman(1), scottish(1), spammer(1), scramble(1), studly(1), uniencode(1), upside-down(1)
assorted text filters
kermit(1)
C(hyKermit 9.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic (if not advanced) use of C(hyKermit 9.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 9.0 from earlier releases. This document is also available as a Web page at: http://www.columbia.edu/kermit/ckututor.html
keyboard(4)
pc keyboard interface
keyboard_getstate(3)
get a pointer to a buffer holding the state of all keys in raw keyboard mode
kig(1)
an interactive geometry program for KDE
kill(1)
terminate or signal a process
kjs(1)
KDE ECMAScript compatible interpreter
kjs5(1)
KDE ECMAScript compatible interpreter
kjscmd(1)
KDE KJSEmbed interpreter
kjscmd5(1)
Frameworks KJSEmbed interpreter
kmplot(1)
mathematical function plotter
koi2koi(1)
cyrillic charset auto converter
koi8rxterm(1)
X terminal emulator for KOI8-R environments
kover(1)
CD Cover printer
kpcli(1)
A command line interface to KeePass database files
kpseaccess(1)
determine whether a file can be accessed
kpsewhere(1)
Expanding kpsewhich to separately iterate over each texmf tree listed in $TEXMF
kqueue_add_filteropts(9), kqueue_del_filteropts(9), kqfd_register(9), knote_fdclose(9), knlist_init(9), knlist_init_mtx(9), knlist_init_rw_reader(9), knlist_add(9), knlist_remove(9), knlist_remove_inevent(9), knlist_empty(9), knlist_clear(9), knlist_delete(9), knlist_destroy(9), KNOTE_LOCKED(9), KNOTE_UNLOCKED(9)
event delivery subsystem
krb5-plugin(7)
plugin interface for Heimdal
krb5_crypto_getblocksize(3), krb5_crypto_getconfoundersize krb5_crypto_getenctype(3), krb5_crypto_getpadsize(3), krb5_crypto_overhead(3), krb5_decrypt(3), krb5_decrypt_EncryptedData(3), krb5_decrypt_ivec(3), krb5_decrypt_ticket(3), krb5_encrypt(3), krb5_encrypt_EncryptedData(3), krb5_encrypt_ivec(3), krb5_enctype_disable(3), krb5_enctype_keysize(3), krb5_enctype_to_string(3), krb5_enctype_valid(3), krb5_get_wrapped_length(3), krb5_string_to_enctype(3)
encrypt and decrypt data, set and get encryption type parameters
krb5_get_init_creds(3), krb5_get_init_creds_keytab(3), krb5_get_init_creds_opt(3), krb5_get_init_creds_opt_alloc(3), krb5_get_init_creds_opt_free(3), krb5_get_init_creds_opt_init(3), krb5_get_init_creds_opt_set_address_list(3), krb5_get_init_creds_opt_set_addressless(3), krb5_get_init_creds_opt_set_anonymous(3), krb5_get_init_creds_opt_set_default_flags(3), krb5_get_init_creds_opt_set_etype_list(3), krb5_get_init_creds_opt_set_forwardable(3), krb5_get_init_creds_opt_set_pa_password(3), krb5_get_init_creds_opt_set_paq_request(3), krb5_get_init_creds_opt_set_preauth_list(3), krb5_get_init_creds_opt_set_proxiable(3), krb5_get_init_creds_opt_set_renew_life(3), krb5_get_init_creds_opt_set_salt(3), krb5_get_init_creds_opt_set_tkt_life(3), krb5_get_init_creds_opt_set_canonicalize(3), krb5_get_init_creds_opt_set_win2k(3), krb5_get_init_creds_password(3), krb5_prompt(3), krb5_prompter_posix(3)
Kerberos 5 initial authentication functions
krb5_principal_intro(3)
The principal handing functions. A Kerberos principal is a email address looking string that contains to parts separeted by a @. The later part is the kerbero realm the principal belongs to and the former is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
kstash(8)
store the KDC master password in a file
ksyms(4)
kernel symbol table interface
kterm(1)
multi-lingual terminal emulator for X
ktremotemgr(1)
command line interface to manage the remote database
ktremotetest(1)
command line interface to test the remote database
kttimedmgr(1)
command line interface to manage the timed database
kttimedtest(1)
command line interface to test the timed database
ktutilmgr(1)
command line interface of miscellaneous utilities
ktutiltest(1)
command line interface to test the utility functions
kvirc(1), KVIrc(1)
an Internet Relay Chat client
kvm(3)
kernel memory interface
kvm_geterr(3)
get error message on kvm descriptor
l2a(1)
a LaTeX detergent
label3d(l)
process a Raster3D scene containing labels
lagg(4)
link aggregation and link failover interface
lat_connect(8)
measure interprocess connection latency via TCP/IP
lat_pipe(8)
measure interprocess communication latency through pipes
lat_rpc(8)
measure interprocess communication latency via Sun RPC
lat_tcp(8)
measure interprocess communication latency via TCP/IP
lat_udp(8)
measure interprocess communication latency via UDP/IP
lat_unix(8)
measure interprocess communication latency via UNIX sockets
lat_unix_connect(8)
measure interprocess connection latency via UNIX sockets
latexdiff(1)
determine and markup differences between two latex files
lax(5)
Parameter file for logic synthesis man1/alc_origin.1
lcdtest(1)
a utility to display LCD monitor test patterns
ldap_bind(3), ldap_bind_s(3), ldap_simple_bind(3), ldap_simple_bind_s(3), ldap_sasl_bind(3), ldap_sasl_bind_s(3), ldap_sasl_interactive_bind_s(3), ldap_parse_sasl_bind_result(3), ldap_unbind(3), ldap_unbind_s(3), ldap_unbind_ext(3), ldap_unbind_ext_s(3), ldap_set_rebind_proc(3)
LDAP bind routines
ldapmodifygroup(1)
modifies a POSIX group account in LDAP interactively
ldapmodifymachine(1)
modifies a POSIX machine account in LDAP interactively
ldapmodifyuser(1)
modifies a POSIX user account in LDAP interactively
ldif(5)
LDAP Data Interchange Format
ldint(7)
GNU Linker Internals
ldns_buffer_limit(3), ldns_buffer_set_limit(3), ldns_buffer_capacity(3), ldns_buffer_set_capacity(3), ldns_buffer_reserve(3), ldns_buffer_at(3), ldns_buffer_begin(3), ldns_buffer_end(3), ldns_buffer_current(3)
buffer limits and pointers
ldns_dname_compare(3), ldns_dname_interval(3)
compare two dnames
ldns_dnssec_zone_find_rrset(3), ldns_dnssec_zone_new(3), ldns_dnssec_zone_free(3), ldns_dnssec_zone_add_rr(3), ldns_dnssec_zone_names_print(3), ldns_dnssec_zone_print(3), ldns_dnssec_zone_add_empty_nonterminals(3)
functions for ldns_dnssec_zone
ldns_update_set_zocount(3), ldns_update_set_prcount(3), ldns_update_set_upcount(3), ldns_update_set_adcount(3)
set the update packet counters
ldns_update_zocount(3), ldns_update_prcount(3), ldns_update_upcount(3), ldns_update_adcount(3)
return update packet counters
le(4)
AMD Am7900 LANCE and Am79C9xx ILACC/PCnet Ethernet interface driver
legesmotus(6)
A team-based, networked, 2D shooter set in zero-gravity
lessecho(1)
expand metacharacters
lesspipe(1), lesspipe.sh(1)
a filter for less
lexter(6)
a curses falling letters puzzle game
lgc-pg(1)
Converter Tool for original Panzer General Data Files
lge(4)
Level 1 LXT1001 NetCellerator PCI Gigabit Ethernet adapter driver
lhs2TeX(1)
a literate Haskell to (La)TeX code translator
libarchive_changes(3)
changes in libarchive interface
libarchive_internals(3)
description of libarchive internal interfaces
libavfilter(3)
multimedia filtering library
libcurl-easy(3)
easy interface overview
libcurl-multi(3)
how to use the multi interface
libcurl-share(3)
how to use the share interface
libdevq(3)
Generic Device Query and Monitor interface
libexpect(3)
programmed dialogue library with interactive programs
libidnkit(3), libidnkitlite(3)
internationalized domain name handling libraries
libinn(3)
InterNetNews library routines
libiperf(3)
API for iperf3 network throughput tester
libipmidetect(3)
a library of functions to determine if a node is detected or undetected
libmemstat(3)
library interface to retrieve kernel memory allocator statistics
libmj(3)
minimalist JSON lightweight data interchange library
libnutclient_misc(3), nutclient_authenticate(3), nutclient_logout(3), nutclient_device_login(3), nutclient_get_device_num_logins(3), nutclient_device_master(3), nutclient_device_forced_shutdown(3)
Miscelaneous functions in Network UPS Tools high-level client access library
libowfat_array(3), array(3)
The array library interface
libowfat_array_get(3), array_get(3)
get pointer to nth element in array
libowfat_array_start(3), array_start(3)
get pointer to first element in array
libowfat_buffer_peek(3), buffer_peek(3)
return pointer to string in buffer
libowfat_buffer_puterror(3), buffer_puterror(3)
write error string to buffer and flush
libowfat_buffer_puterror2(3), buffer_puterror2(3)
write error string to buffer and flush
libowfat_iarray_allocate(3), iarray_allocate(3)
get pointer to nth element in iarray
libowfat_iarray_get(3), iarray_get(3)
get pointer to nth element in iarray
libowfat_io_finishandshutdown(3), io_finishandshutdown(3)
deallocate internal data structures
libowfat_range_ptrinbuf(3), range_ptrinbuf(3)
range check pointer in buffer
libowfat_rangecheck(3), rangecheck.h(3)
pointer range checking
libowfat_scan_charsetnskip(3), scan_charsetnskip(3)
skip characters from set
libowfat_scan_ip6if(3), scan_ip6(3)
parse an IPv6 number and interface in ASCII representation
libowfat_scan_noncharsetnskip(3), scan_noncharsetnskip(3)
skip characters not from set
libowfat_socket_getifidx(3), socket_getifidx(3)
get interface number
libowfat_socket_getifname(3), socket_getifname(3)
get interface name
libowfat_str_chr(3), str_chr(3)
find character in ASCIIZ string
libowfat_str_rchr(3), str_rchr(3)
find character in ASCIIZ string
libowfat_stralloc_append(3), stralloc_append(3)
append a character to a stralloc
libowfat_tai_unpack(3), tai_unpack(3)
convert to external TAI64 format
libowfat_taia_unpack(3), taia_unpack(3)
convert to external TAI64NA format
libpat(3), PAT(3)
Generic pattern data structure
libppl(3)
the C++ interface of the Parma Polyhedra Library
libppl_c(3)
the C interface of the Parma Polyhedra Library
librouteros(3)
Library for accessing MikroTik's RouterOS via its API
libssh2_session_abstract(3)
return a pointer to a session's abstract pointer
libssh2_session_disconnect_ex(3)
terminate transport layer
libssh2_session_set_last_error(3)
sets the internal error state
libssh2_userauth_keyboard_interactive(3)
convenience macro for libssh2_userauth_keyboard_interactive_ex(3) calls
libssh2_userauth_keyboard_interactive_ex(3)
authenticate a session using keyboard-interactive authentication
libtecla(3)
An interactive command-line input library
libucl(3), ucl_parser_new(3), ucl_parser_register_macro(3), ucl_parser_register_variable(3), ucl_parser_add_chunk(3), ucl_parser_add_string(3), ucl_parser_add_file(3), ucl_parser_get_object(3), ucl_parser_get_error(3), ucl_parser_free(3), ucl_pubkey_add(3), ucl_parser_set_filevars(3)
universal configuration library parser and utility functions
libugidfw(3)
library interface to the file system firewall MAC policy
link(5)
dynamic loader and link editor interface
links(1)
lynx-like alternative character mode WWW browser
linphone(1)
Gnome interface of linphone, a SIP compatible internet phone
linphonec(1)
Console interface of linphone, a SIP compatible internet phone
linuxdoc(1)
LinuxDoc DTD SGML converter to other output format
lit-cheri(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit-cheri128(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit-devel(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit33(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit34(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit35(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit38(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit39(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lit40(1), lit(1)
LLVM Integrated Tester rst2man-indent-level 0 1 rstReportMargin \$1
lmc(4)
device driver for LMC (now SBE) wide-area network interface cards
lmcconfig(8)
configuration program for SBE (formerly LMC) wide-area network interface cards
lmdb(n)
an interface to the Lightning Memory-Mapped Database (LMDB)
lmdb_table(5)
Postfix LMDB adapter
lmserver(6)
The server for Leges Motus, a team-based, networked, 2D shooter set in zero-gravity
lnkinfo(1)
determines information about a Windows Shortcut File (LNK)
lo(4)
software loopback network interface
loadrdsfig(3)
give back a pointer to a figure man1/alc_origin.1
loadrdsparam(3)
load parameters from symbolic to real conversion. man1/alc_origin.1
localmailfilter(7)
Local mail filtering
locate(1)
list files in databases that match a pattern
lock(1)
reserve a terminal
lockerctl(1)
Control interface for the desktop screensaver
lockinit(9), lockdestroy(9), lockmgr(9), lockmgr_args(9), lockmgr_args_rw(9), lockmgr_disown(9), lockmgr_printinfo(9), lockmgr_recursed(9), lockmgr_rw(9), lockmgr_waiters(9), lockstatus(9), lockmgr_assert(9)
lockmgr family of functions
lofigchain(3)
creates a netlist in terms of connectors on signals man1/alc_origin.1
logcheck(8)
program to scan system logs for interesting lines
logd(8)
logging server for Archiveopteryx
login(1)
log into the computer
logtool(1)
parse and filter syslog files
logwatch(8)
system log analyzer and reporter
lp(4)
printer port Internet Protocol driver
lp5250d(1)
start an AS/400 printer session
lpadmin(8)
configure cups printers and classes
lpass(1)
command line interface for LastPass
lpbanner(1), pclbanner(1), psbanner(1)
printer banners in text, PCL and PostScript
lpbb(4)
parallel port I2C bit-banging interface
lpc(8)
line printer control program
lpd(8)
line printer spooler daemon
lpd.conf(5)
configuration file for the LPRng line printer spooler system
lpd.perms(5)
permissions control file for the LPRng line printer spooler system
lpf(1)
general printer filter
lpoptions(1)
display or set printer options and defaults
lprm(1)
remove jobs from the line printer spooling queue
lprngtool(1)
configuration and Graphics User Interface for LPRng
lprps(8)
lpr PostScript communication filter
lpstat(1)
compatibility program to get information about printers
lpt(4)
generic printer device driver
lptcontrol(8)
a utility for manipulating the lpt printer driver
lptest(1)
generate lineprinter ripple pattern
lua51(1), lua(1)
Lua interpreter
lua52(1), lua(1)
Lua interpreter
lua53(1), lua(1)
Lua interpreter
luit(1)
Locale and ISO 2022 support for Unicode terminals
lurker-params(1)
parses parameters from the config file
luser(8)
process to control the clueless induhviduals who (mis)use computer systems, peripheral devices and system administrators. Word play on "loser" and "user"
lxrandr(1)
a GTK+2 interface to XRandR for LXDE desktop
lxsession-db(1)
lxsesion database updater
lxsession-default-terminal(1)
Launching default terminal set by LXSession
lxterminal(1)
a lightweight terminal emulator based on GTK+ for the LXDE desktop
m-intf(4)
InterFile 3.3 medical image format (MedCon)
m17nCharacter(3m17n), Character(3m17n)
Character objects and API for them
m17nFontset(3m17n), Fontset(3m17n)
A fontset is an object that maps a character to fonts
m3zume(1)
create Zeus IE (interesting event) stubs from event specs
mac_ifoff(4)
interface silencing policy
mac_lomac(4)
Low-watermark Mandatory Access Control data integrity policy
magic(5)
file command's magic pattern file
magicfilter(5)
format of printer description files
magicfilter(8)
automatic configurable printer filter
maildrop(1)
mail delivery filter/agent
maildropex(7)
maildrop filtering language examples
maildropfilter(7)
maildrops filtering language
mailfmt(1)
Reformat mail/news to wrap lines and remove quotation characters
makecint(1)
C/C++ interpreter-compiler
makeconv(1)
compile a converter table
makeindex(1)
a general purpose, formatter-independent index processor
makepp_speedup(1)
-- How to make makepp faster
makeppreplay(1)
-- Fast repeater of selected makepp actions
mandoc_char(7)
mandoc special characters
manlifter(1)
mass-conversion script and test harness for doclifter
masscan(8)
Fast scan of the Internet
master(5)
Postfix master process configuration file format
master(8)
Postfix master process
masterguard(8)
Driver for Masterguard UPS equipment
mate-about-me(1)
is a control center applet
mate-appearance-properties(1)
is a control center applet
mate-charpick-applet(1)
Character Picker Applet for the MATE panel
mate-control-center(1)
Configure MATE settings
mate-default-applications-properties(1)
is a control center applet
mate-terminal(1)
manual page for MATE Terminal Emulator
mathomatic(1)
a computer algebra system
matrix_to_quat(3)
Constructs a quaternion from a rotation matrix. Allegro game programming library
mawk(1)
pattern scanning and text processing language
mbksetautoackchld(3)
Tells Alliance to automatically handle terminaison of child process. man1/alc_origin.1
mblen(3)
get number of bytes in a character
mboxgrep(1)
displays email messages matching a pattern
mbpool(9)
buffer pools for network interfaces
mbrlen(3)
get number of bytes in a character (restartable)
mbrtowc(3), mbrtoc16(3), mbrtoc32(3)
convert a character to a wide-character code (restartable)
mbsinit(3)
determine conversion object status
mbsrtowcs(3), mbsnrtowcs(3)
convert a character string to a wide-character string (restartable)
mbstowcs(3)
convert a character string to a wide-character string
mbtowc(3)
convert a character to a wide-character code
mcedit(1)
Full featured terminal text editor for Unix-like systems
mcgui-2.2a(1), mcgui(1)
graphical user interface of the McStas neutron ray-trace simulation package
mchar_define_property(3m17n)
Define a character property
mchar_encode(3m17n)
Encode a character code
mchar_get_prop(3m17n)
Get the value of a character property
mchar_get_prop_table(3m17n)
Get the char-table for a character property
mchar_map_charset(3m17n)
Call a function for all the characters in a specified charset
mchar_put_prop(3m17n)
Set the value of a character property
mchars_alloc(3), mchars_free(3), mchars_num2char(3), mchars_num2uc(3), mchars_spec2cp(3), mchars_spec2str(3), mchars_uc2str(3)
character table for mandoc
mchartable_lookup(3m17n)
Return the assigned value of a character in a chartable
mchartable_map(3m17n)
Call a function for characters in a chartable
mchartable_max_char(3m17n)
Return the maximum character whose value is set in a chartabe
mchartable_min_char(3m17n)
Return the minimum character whose value is set in a chartabe
mchartable_range(3m17n)
Search for characters that have non-default value
mchartable_set(3m17n)
Assign a value to a character in a chartable
mchartable_set_range(3m17n)
Assign a value to the characters in the specified range
mconv_buffer_converter(3m17n)
Create a code converter bound to a buffer
mconv_free_converter(3m17n)
Free a code converter
mconv_getc(3m17n)
Read a character via a code converter
mconv_gets(3m17n)
Read a line using a code converter
mconv_putc(3m17n)
Write a character via a code converter
mconv_rebind_buffer(3m17n)
Bind a buffer to a code converter
mconv_rebind_stream(3m17n)
Bind a stream to a code converter
mconv_reset_converter(3m17n)
Reset a code converter
mconv_stream_converter(3m17n)
Create a code converter bound to a stream
mconv_ungetc(3m17n)
Push a character back to a code converter
mcplot-2.2a(1), mcplot(1)
simulation results plotter of the McStas neutron ray-trace simulation package
mcpp(1)
Matsui CPP, an alternative C preprocessor
mcprint(3)
ship binary data to printer
mcprint(3x)
ship binary data to printer
mcron(1)
a program to run tasks at regular (or not) intervals
mcv(1)
mesh file converter
mcview(1)
Internal file viewer of GNU Midnight Commander
mdb-sql(1)
SQL interface to MDB Tools
mdbCharsetList(5)
List of character set definitions
mdconvert(1)
Maildir mailbox UID storage scheme converter
mdio(4)
IEEE 802.3 Management Data Input/Output interface
mdraw_coordinates_position(3m17n)
Return the character position nearest to the coordinates
mdraw_per_char_extents(3m17n)
Obtain per character dimension information
mdraw_text_per_char_extents(3m17n)
Compute the text dimensions of each character of M-text
mdvalidater(1), mdvalidator(1)
Validate XML Documents against the ECMA Documentation Schema
megareg(1)
Register new Mega.nz account
memccpy(3)
copy string until character found
memfill(3)
fill memory area with pattern
memtester(8)
stress test to find memory subsystem faults
menu_pattern(3)
get and set a menu's pattern buffer
menu_pattern(3x)
get and set a menu's pattern buffer
mergemaster(8)
merge configuration files, et al during an upgrade
metalog(8)
an alternative syslog daemon
metasend(1)
Crude interface for sending non-text mail
meteor(4)
video capture driver interface
mewest(1)
register messages into an index for Hyper Estraier
mewl(1)
Message scanner for Mew 4 or later
mfb(3)
model frame buffer interface
mfbcap(5)
graphics terminal capability data base
mflt_find(3m17n)
Find an FLT suitable for the specified character and font
mflt_run(3m17n)
Layout characters with an FLT
mfsmaster(8)
start, restart or stop Moose File System master process
mfsmaster.cfg(5)
main configuration file for mfsmaster
mfsstatsdump(8)
dump usage data from master stats file in csv or png format
mgettydefs(4)
speed and terminal settings used by mgetty
micod(8)
MICO object adapter daemon
microdowell(8)
Driver for Microdowell Enterprise UPS series
midi_msg_callback(3), midi_meta_callback(3), midi_sysex_callback(3)
Hook functions allowing you to intercept MIDI player events. Allegro game programming library
midicopy(1)
Copy selected track, channel, time interval of a MIDI file to another MIDI file
migrate(1), MIGRATE(1)
estimate population parameters: migration rate and population size
miibus(4)
IEEE 802.3 Media Independent Interface network bus
milter(3bobcat), FBB::Milter(3bobcat)
Interface to the sendmail mail filter facilities
milter-callback(8)
sendmail milter using sender verification
milter-greylist(8)
grey listing filter for sendmail
milter-manager(1)
an effective anti-spam and anti-virus solution with milters
milter-manager-log-analyzer(1)
log analyzer for milter-manager
milter-performance-check(1)
MTA performance check program
milter-regex(8)
sendmail milter plugin for regular expression filtering
milter-report-statistics(1), milter-statistics-report(1)
milter process statistics reporter
milter-test-client(1)
milter side milter protocol implemented program
milter-test-server(1)
MTA side milter protocol implemented program
miltertest(8)
milter unit test utility
mime(1), MIME(1)
Multipurpose Internet Mail Extensions
mimedefang(8)
Sendmail MIME mail filter
mimedefang-filter(5)
Configuration file for MIMEDefang mail filter
mimedefang-multiplexor(8)
Process pool controller for mail filters
mimedefang-notify(7)
Conventions used by mimedefang-multiplexor(8) to notify an external program of state changes
mimedefang-protocol(7)
Conventions used by mimedefang(8) to communicate with filter programs
mincore(2)
determine residency of memory pages
minfo(1)
print the parameters of a MSDOS filesystem '" t TQ \$1 . (is' (if` (pd"
miniupnpd(8)
UPnP Internet Gateway Device Daemon
minput_filter(3m17n)
Filter an input key
mio_open(3), mio_close(3), mio_read(3), mio_write(3), mio_nfds(3), mio_pollfd(3), mio_revents(3), mio_eof(3)
sndio interface to MIDI streams
miredo(8)
Teredo IPv6 tunneling for Unix
miredo-server(8)
Teredo server for Unix
mirror-master(1), mm(1)
mirror master
mkbitmap(1)
transform images into bitmaps with scaling and filtering
mkdhparams(8)
create DH parameter file
mkfilters(1)
generate a minimal firewall ruleset for ipfilter
mksunbootcd(1)
combine filesystem for Sun Microsystems, Inc. computers for creating bootable compact discs images
mlclient(1)
client for mlterm
mlnlffigen(1)
glue-code generator for use with the new "NLFFI" foreign function interface for Standard ML and MLton
mlterm(1)
Multi Lingual TERMinal emulator on X
mlx4en(4)
Mellanox ConnectX-3 10GbE/40GbE network adapter driver
mlx4ib(4)
Mellanox ConnectX-3 10GbE/40GbE network adapter driver
mlx5en(4)
Mellanox ConnectX-4, ConnectX-4 LX and ConnectX-5 based 100Gb, 50Gb, 40Gb, 25Gb and 10Gb Ethernet adapter driver
mlx5ib(4)
Mellanox ConnectX-4 and ConnectX-4 LX based 100Gb, 50Gb, 40Gb, 25Gb and 10Gb network adapter driver
mlx5io(4)
IOCTL interface to manage Connect-X 4/5 Mellanox network adapters
mlx5tool(8)
Utility for managing Connect-X 4/5 Mellanox network adapters
mm2gv(1)
Matrix Market-DOT converters
mmafm(1)
creates AFM font metrics for multiple master fonts '
mmpfb(1)
creates single-master fonts from multiple master fonts '
mmv(1)
move/copy/append/link multiple files by wildcard patterns } {
modbus_get_float(3)
get a float value from 2 registers
modbus_get_float_abcd(3)
get a float value from 2 registers in ABCD byte order
modbus_get_float_badc(3)
get a float value from 2 registers in BADC byte order
modbus_get_float_cdab(3)
get a float value from 2 registers in CDAB byte order
modbus_get_float_dcba(3)
get a float value from 2 registers in DCBA byte order
modbus_mapping_new(3)
allocate four arrays of bits and registers
modbus_mapping_new_start_address(3)
allocate four arrays of bits and registers accessible from their starting addresses
modbus_mask_write_register(3)
mask a single register
modbus_read_input_registers(3)
read many input registers
modbus_read_registers(3)
read many registers
modbus_set_float(3)
set a float value from 2 registers
modbus_set_float_abcd(3)
set a float value in 2 registers using ABCD byte order
modbus_set_float_badc(3)
set a float value in 2 registers using BADC byte order
modbus_set_float_cdab(3)
set a float value in 2 registers using CDAB byte order
modbus_set_float_dcba(3)
set a float value in 2 registers using DCBA byte order
modbus_write_and_read_registers(3)
write and read many registers in a single transaction
modbus_write_register(3)
write a single register
modbus_write_registers(3)
write many registers
module(1)
command interface to the Modules package
moebiusgears(6)
draw a moebius strip of interlocking gears
moire(6)
draw circular interference patterns
moire2(6)
circular interference patterns
monitord(8)
monitor system services for accidental termination
monkeysphere(1)
Monkeysphere client user interface
monmaptool(8)
ceph monitor cluster map manipulation tool rst2man-indent-level 0 1 rstReportMargin \$1
more(1)
file perusal filter for crt viewing
mosh(1)
A Fast R6RS Scheme Interpreter
mount.glusterfs(8)
script to mount native GlusterFS volume
mouse_getposition_6d(3), mouse_setposition_6d(3), mouse_setrange_6d(3)
provide an interface to 3d mice
mouse_on_screen(3)
Tells you whether the mouse pointer is currently on screen. Allegro game programming library
mp(1)
POSTSCRIPT pretty printer
mp3blaster(1)
An interactive text-console based mp3 player
mpage(1)
print multiple pages per sheet on PostScript printer
mplist_get_func(3m17n)
Get the value (function pointer) of a property in a property list
mplist_put_func(3m17n)
Set the value (function pointer) of a property in a property list
mpqc(1)
The Massively Parallel Quantum Chemistry program (MPQC) computes the properties of molecules from first principles. This documentation is divided into the following chapters: "o" 2 MPQC Overview "o" 2 Running MPQC "o" 2 MPQC Input "o" 2 Validating MPQC "o" 2 Running Psi 3 from MPQC "o" 2 CCA Components "o" 2 MPQC License "o" 2 MPQC Warranty
mrinfo(8)
displays configuration info from a multicast router
mrtg-forum(1)
Interactive Help for MRTG users
mrtg-mibhelp(1)
A Table of some interesting OIDs
msd-locate-pointer(1)
create ripples around mouse pointer
msgcache(8)
Cache client messages for later pickup by xymonfetch
msgconv(1)
character set conversion for message catalog
msgfilter(1)
edit translations of message catalog
msggrep(1)
pattern matching on message catalog
mshowfat(1)
shows FAT clusters allocated to file '" t TQ \$1 . (is' (if` (pd"
msiecfinfo(1)
determines information about a MSIE Cache File (index.dat)
msk(4)
Marvell/SysKonnect Yukon II Gigabit Ethernet adapter driver
msymbol_get_func(3m17n)
Get the value (function pointer) of a symbol property
msymbol_put_func(3m17n)
Set the value (function pointer) of a symbol property
mtbl_iter(3)
iterate over a sequence of key-value pairs
mtbl_sorter(3)
sort a sequence of unordered key-value pairs
mtbl_writer(3)
create an MTBL file
mtext_cat_char(3m17n)
Append a character to an M-text
mtext_character(3m17n)
Search a character in an M-text
mtext_chr(3m17n)
Return the position of the first occurrence of a character in an M-text
mtext_cmp(3m17n)
Compare two M-texts character-by-character
mtext_copy(3m17n)
Copy characters in the specified range into an M-text
mtext_cspn(3m17n)
Search an M-text for the complement of a set of characters
mtext_del(3m17n)
Delete characters in the specified range destructively
mtext_ins_char(3m17n)
Insert a character into an M-text
mtext_len(3m17n)
Number of characters in M-text
mtext_ncmp(3m17n)
Compare initial parts of two M-texts character-by-character
mtext_ncpy(3m17n)
Copy the first some characters in an M-text to another
mtext_pbrk(3m17n)
Search an M-text for any of a set of characters
mtext_rchr(3m17n)
Return the position of the last occurrence of a character in an M-text
mtext_ref_char(3m17n)
Return the character at the specified position in an M-text
mtext_set_char(3m17n)
Store a character into an M-text
mtext_spn(3m17n)
Search an M-text for a set of characters
mtio(4)
FreeBSD magtape interface
mtoolsfm(1)
graphical user interface to the mtools diskette package for UNIX
muffin(1), MUFFIN(1)
Clutter based compositing GTK2 Window Manager
mug(1)
a graphical user interface for mu mail searches
multi-aterm(1)
a tabbed VT102 terminal emulator for X-Window
multibyte(3)
multibyte and wide character manipulation functions
munin-cron(8)
A program to batch other Munin master programs
mutter(1), MUTTER(1)
Clutter based compositing GTK2 Window Manager
mwhois.conf(5)
alternative WHOIS servers list for whois client
mxge(4)
Myricom Myri10GE 10 Gigabit Ethernet adapter driver
mydns(8)
SQL-based Internet name daemon
mydnsimport(8)
Import zone data from external sources
mysql_setpermission(1)
interactively set permissions in grant tables
mysql_waitpid(1)
kill process and wait for its termination
mysql_zap(1)
kill processes that match a pattern
mysqladmin(1)
client for administering a MySQL server
mysqlsla(3)
Parse, filter, analyze and sort MySQL slow, general and binary logs
named(8)
Internet domain name server
nanocat(1)
a command-line interface to nanomsg
nap(1), napping(1)
Linux Napster Client
naturalstrcmp(3)
compare string in alphabetical order for letters and numerical for digits. man1/alc_origin.1
nbd-server(1)
serve a file as a block device to other computers running the GNU/Linux(tm) or GNU/Hurd Operating System
ncftpget(1)
Internet file transfer program for scripts
ncftpls(1)
Internet file transfer program for scripts
ncftpput(1)
Internet file transfer program for scripts
ncv(4)
NCR 53C500 based SCSI host adapter driver
ne_buffer_clear(3), ne_buffer_grow(3), ne_buffer_altered(3)
clear, grow, or mark as altered a string buffer
ne_get_response_header(3), ne_response_header_iterate(3)
functions to access response headers
ne_has_support(3)
determine feature support status
ne_i18n_init(3)
functions to initialize internationalization support
ne_set_server_auth(3), ne_set_proxy_auth(3), ne_forget_auth(3)
register authentication callbacks
ne_ssl_set_verify(3)
register an SSL certificate verification callback
nero(1)
Negotiating Router
net80211(4)
standard interface to IEEE 802.11 devices
netatalk.conf(5)
Configuration file used by Netatalk to determine its general configuration
netcdf(3)
Unidata's Network Common Data Form (netCDF) library interface
netperfmeter(1)
Network Performance Meter
netrik(1)
The ANTRIK internet browser
netsnmp_agent_api(3)
embedding an agent into a external application
new_prescr(3)
curses screen-pointer extension
new_prescr(3x)
curses screen-pointer extension
newsaux(8cn), spacefor(8cn)
check available space for news queuelen - get length of outbound-news uucp queues sizeof - get size of file(s) for news ctime, getabsdate - convert dates to and from internal representation for news newshostname - get host name for news gngp - search text using a newsgroup pattern canonhdr - extract header and canonicalize newslock - do locking for news
newsbeuter(1)
an RSS/Atom feed reader for text terminals
newscacheclean(8), test(8)
Purge the NewsCache to SpoolSize (newscache.conf parameter)
newsfeeds(5)
Determine where Usenet articles are sent
newsfish(1)
batch USENET news reader with filter capabilities
newspost(1)
a usenet binary autoposter
nextafter(3), nextafterf(3), nextafterl(3), nexttoward(3), nexttowardf(3), nexttowardl(3)
next representable value
nextboot(8)
specify an alternate kernel and boot flags for the next reboot
nextwctype(3)
iterate through character classes
ng_bpf(4)
Berkeley packet filter netgraph node type
ng_eiface(4)
generic Ethernet interface netgraph node type
ng_etf(4)
Ethertype filtering netgraph node type
ng_gif(4)
generic tunnel interface netgraph node type
ng_hci(4)
Netgraph node type that is also a Bluetooth Host Controller Interface (HCI) layer
ng_iface(4)
interface netgraph node type
ng_ipfw(4)
interface between netgraph and IP firewall
nge(4)
National Semiconductor PCI Gigabit Ethernet adapter driver
nice(1)
execute a utility at an altered scheduling priority
nifmon(8)
display network interface status, statistics and data
nitrogen(1)
X11 background previewer and setter
nkf(1)
Network Kanji Filter
nl(1)
line numbering filter
nmdm(4)
nullmodem terminal driver
nmixer(1)
An interactive text-based sound-mixer control program
nmsgtool(1)
command line interface to libnmsg
nn(1)
efficient net news interface (No News is good news)
nn_ipc(7)
inter-process transport mechanism
nn_recvmsg(3)
fine-grained alternative to nn_recv
nn_sendmsg(3)
fine-grained alternative to nn_send
nnmaster(8)
nn database manager
nnstats(1m)
display nnmaster collection and expire statistics
noindex(1)
build external index for noweb document
noof(6)
draw rotatey patterns
normal3d(l)
apply transformation matrix in Raster3D input file
notangle(1), noweave(1), nountangle(1)
noweb, a literate-programming tool
notifier(7)
cups notification interface
noweb(1)
a simple literate-programming tool
nowebfilters(7)
filters and parsers for use with noweb
npadmin(1)
examine network printer information
nslookup(1)
query Internet name servers interactively
nsnake(6)
a snake game for your terminal
nsp(4)
Workbit Ninja SCSI-3 based PC-Card SCSI host adapter driver
ntfscluster(8)
identify files in a specified region of an NTFS volume
ntlm_auth(1)
tool to allow external access to Winbinds NTLM authentication function
ntp_adjtime(2), ntp_gettime(2)
Network Time Protocol (NTP) daemon interface system calls
nvclock(1)
Overclock your nVidia graphics adapter
nvidia-smi(1)
NVIDIA System Management Interface program
nxge(4)
Neterion Xframe 10GbE Server/Storage adapter driver
nxsh(1)
Simple shell containing NSF/NX interpreter
nxwish(1)
Simple windowing shell containing NSF/NX interpreter
obfit(1)
superimpose two molecules based on a pattern
obgui(1)
Open Babel graphical user interface
obliterate(8)
scrub bits off magnetic media
obrotate(1)
batch-rotate dihedral angles matching SMARTS patterns
ocaml(1)
The OCaml interactive toplevel
ocamlfind(1), R ocamlfind(1)
[Command-line interface of the Package manager]c
ocamlrun(1)
The OCaml bytecode interpreter
oce(4)
Device driver for Emulex OneConnect 10Gb network adapters
ocf-tester(8)
Part of the Linux-HA project
ocf_heartbeat_AudibleAlarm(7)
Emits audible beeps at a configurable interval
ocf_heartbeat_ClusterMon(7)
Runs crm_mon in the background, recording the cluster status to an HTML file
ocf_heartbeat_EvmsSCC(7)
Manages EVMS Shared Cluster Containers (SCCs) (deprecated)
ocf_heartbeat_Evmsd(7)
Controls clustered EVMS volume management (deprecated)
ocf_heartbeat_ICP(7)
Manages an ICP Vortex clustered host drive
ocf_heartbeat_asterisk(7)
Manages an Asterisk PBX
ocf_heartbeat_db2(7)
Resource Agent that manages an IBM DB2 LUW databases in Standard role as primitive or in HADR roles as master/slave configuration. Multiple partitions are supported
ocf_heartbeat_ethmonitor(7)
Monitors network interfaces
ocf_heartbeat_iface-bridge(7)
Manages Bridge network interfaces
ocf_heartbeat_iface-vlan(7)
Manages VLAN network interfaces
ocf_heartbeat_rabbitmq-cluster(7)
rabbitmq clustered
ocf_pacemaker_ClusterMon(7)
Runs crm_mon in the background, recording the cluster status to an HTML file
ocf_pacemaker_controld(7)
DLM Agent for cluster file systems
ocs_fc(4)
Device driver for Emulex Fibre Channel Host Adapters
octave(1)
A high-level interactive language for numerical computations
octave-cli(1)
A high-level interactive language for numerical computations
odo(1)
an atomic odometer for the command line
ods-hsmspeed(1)
OpenDNSSEC HSM speed tester
odt2txt(1)
a simple converter from OpenDocument Text to plain text
ofilterstreambuf(3bobcat), FBB::OFilterStreambuf(3bobcat)
Base class for std::ostream filtering
oggz-merge(1)
Merge Ogg files together, interleaving pages in order of presentation time
oggz-scan(1)
Scan an Ogg file and output characteristic landmarks
ogonkify(1)
international support for PostScript
ohash_init(3), ohash_delete(3), ohash_lookup_interval(3), ohash_lookup_memory(3), ohash_find(3), ohash_remove(3), ohash_insert(3), ohash_first(3), ohash_next(3), ohash_entries(3)
light-weight open hashing
ohash_interval(3), ohash_create_entry(3), ohash_qlookup(3), ohash_qlookupi(3)
helper functions for open hashing
ohexstreambuf(3bobcat), FBB::OHexStreambuf(3bobcat)
Writes characters written to an ostream as hex values
ohhandler(1)
An openhpi sample application that uses the openhpi additional interfaces to control openhpi configuration. That is plugins can be loaded, plugin instances (handlers) created, unloaded or their configuration displayed
ohparam(1)
An openhpi sample application that uses the openhpi additional interface to control openhpi configuration parameters
oinkmaster(1)
update Snort signatures
olecfinfo(1)
determines information about a Object Linking and Embedding (OLE) Compound File (CF)
olib(1)
OrCAD(tm) library part to gEDA .sym converter
om_regex(8), msyslog regex output module(8)
syslogd(8) output module used to filter and redirect logs
omapi(3), OMAPI(3)
Object Management Application Programming Interface
onyx(1)
stand-alone Onyx language interpreter
ooef(1)
OOC error filter
opam-admin-depexts(1)
Add external dependencies
open(1)
start a program on a new virtual terminal (VT)
opendkim(8)
DKIM signing and verifying filter for MTAs
opendkim-genkey(8)
DKIM filter key generation tool
opendkim-lua(3)
Programming the OpenDKIM filter using Lua scripts
opendkim-testkey(8)
DKIM filter installation test
opendmarc(8)
DMARC email policy filter for MTAs
opendmarc-params(8)
OpenDMARC reporting parameters setup tool
openhpi(7)
an implementation of the SA Forum's Hardware Platform Interface
openipmi_conparms(7), openipmi_cmdparms(7)
Connection parmeters for OpenIPMI
openipmicmd(1)
An IPMI Command Interface
openipmigui(1)
GUI interface to an IPMI system
openipmish(1)
Shell interface to an IPMI system
openpam_straddch(3)
add a character to a string, expanding the buffer if needed
openpty(3), forkpty(3)
auxiliary functions to obtain a pseudo-terminal
opensc-explorer(1)
generic interactive utility for accessing smart card and similar security token functions
opera(1)
Fast and secure web browser and Internet suite
opt-case.pl(1)
Optimize case insensitive regexp filters for tin
ordchr(3am)
convert characters to strings and vice versa
ori(1)
Ori File System command line interface
oridbg(1)
Ori File System Debug command line interface
orpie(1)
is a console-based RPN calculator with an interactive visual stack
osage(1)
filter for drawing clustered graphs
osd(9), osd_register(9), osd_deregister(9), osd_set(9), osd_reserve(9), osd_set_reserved(9), osd_free_reserved(9), osd_get(9), osd_del(9), osd_call(9), osd_exit(9)
Object Specific Data
osdmaptool(8)
ceph osd cluster map manipulation tool rst2man-indent-level 0 1 rstReportMargin \$1
osh(1)
old shell (command interpreter)
osm2pgsql(1)
Openstreetmap data to PostgreSQL converter
oss_sblive(7)
Creative Labs Sound Blaster Live/Audigy family driver
oss_sbxfi(7)
SoundBlaster X-Fi audio driver
otter-browser(1)
the web browser controlled by the user, not vice-versa
out123(1)
send raw PCM audio or a waveform pattern to an output device
ovs-dpctl(8)
administer Open vSwitch datapaths
ovs-ofctl(8)
administer OpenFlow switches
ovsdb-client(1)
command-line interface to ovsdb-server(1)
owcapi(1)
easy C-language 1-wire interface
owll(9), owll OWLL_WRITE_ONE(9), OWLL_WRITE_ZERO(9), OWLL_READ_DATA(9), OWLL_REASET_AND_PRESENCE(9)
Dallas Semiconductor 1-Wire Link Layer Interface
own(9), own_send_command(9), own_commmand_wait(9), own_self_command(9), own_acquire_bus(9), own crc(9), own_release_bus(9), OWN_ACQUIRE_BUS(9), OWN_CRC(9), OWN_RELEASE_BUS(9), OWN_SEND_COMMAND(9)
Dallas Semiconductor 1-Wire Network and Transport Interface
ownet(1), ownet (1), (libownet)(1)
easy C-language 1-wire interface to the owserver protocol
owperl(3)
perl interface for the 1-wire filesystem
p910nd(8)
port 9100+n printer daemon
p_candebug(9)
determine debuggability of a process
p_cansee(9)
determine visibility of a process
pac(8)
printer/plotter accounting information
pacemaker_remoted(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
pacemakerd(8), Pacemaker(8)
Part of the Pacemaker cluster resource manager
pack_getc(3)
Returns the next character from a stream. Allegro game programming library
pack_putc(3)
Puts a character in the stream. Allegro game programming library
pack_ungetc(3)
Moves one single character back to the input buffer. Allegro game programming library
package(1)
register package user via mailagent
pacpl(1)
Perl Audio Converter, a multi purpose converter/ripper/tagger
page_cert(3)
The basic certificate The basic hx509 cerificate object in hx509 is hx509_cert. The hx509_cert object is representing one X509/PKIX certificate and associated attributes; like private key, friendly name, etc. A hx509_cert object is usully found via the keyset interfaces (Certificate store operations), but its also possible to create a certificate directly from a parsed object with hx509_cert_init() and hx509_cert_init_data(). See the library functions here: hx509 certificate functions
page_peer(3)
Hx509 crypto selecting functions Peer info structures are used togeter with hx509_crypto_select() to select the best avaible crypto algorithm to use. See the library functions here: hx509 certificate selecting functions
page_revoke(3)
Revocation methods There are two revocation method for PKIX/X.509: CRL and OCSP. Revocation is needed if the private key is lost and stolen. Depending on how picky you are, you might want to make revocation for destroyed private keys too (smartcard broken), but that should not be a problem. CRL is a list of certifiates that have expired. OCSP is an online checking method where the requestor sends a list of certificates to the OCSP server to return a signed reply if they are valid or not. Some services sends a OCSP reply as part of the hand-shake to make the revoktion decision simpler/faster for the client
paicc(1), paint_changed_characters(1)
paicc
pam_ck_connector(8)
Register session with ConsoleKit
pam_end(3)
terminate the PAM transaction
pamtester(1)
test pluggable authentication module (PAM) facility
panda_centerwindow(3)
ask the viewer to center the document's window on the screen when the PDF is displayed
panda_dbclose(3)
finalize the use of the Panda internal database
panda_dbopen(3)
prepare the Panda internal database for use
panda_dbread(3)
read a value from the Panda internal database
panda_dbwrite(3)
write a value into the Panda internal database
panda_entergraphicsmode(3)
make sure the page description stream is in graphics mode
panda_hidewindowui(3)
ask the viewer to hide it's display window user interface when this PDF is displayed
panda_makedate(3)
format a date into the internal PDF representation
panda_nfspagemodde(3)
defines display characteristics for the PDF document if it is using non fullscreen mode after defaulting to fullscreen mode
panda_putc(3)
output a single character to the PDF file
panda_setcharacterspacing(3)
set the space between characters
panda_setlinedashing(3)
draw the subsequent lines with the defined dashing pattern
pandoc(1)
general markup converter
panelctl(1)
Control interface for the desktop panel
pano_modify(1)
Change output parameters of project file
paps(1)
UTF-8 to PostScript converter using Pango
paragrep(1)
search paragraphs in a file for patterns
parallel_alternatives(7)
Alternatives to GNU parallel
parse_time(3), print_time_table(3), unparse_time(3), unparse_time_approx(3)
parse and unparse time intervals
pas2jni(1)
Free Pascal Java Native Interface generation tool
passwd(5), master.passwd(5)
format of the password file
pat(5), PAT(5)
Pattern description format
patchwork(1)
filter for drawing clustered graphs as treemaps
patgen(1)
generate patterns for TeX hyphenation
patm(4)
device driver for IDT77252 based ATM interfaces (ProSum and IDT)
pattern(3bobcat), FBB::Pattern(3bobcat)
Performs RE pattern matching
pawd(1)
print automounter working directory
pax(1)
portable archive interchange
pbi_icon(1)
Interacts with a PBIs icon / mime settings
pbm2hp(l)
printer driver of PBM-P4-file for HP Laserjet printers
pbmtoimgv(1)
Portable Bitmap to Pilot Image Viewer converter, version 2.0
pbmtojbg(1)
portable bitmap to JBIG1 file converter
pbs_alterjob(3)
alter pbs batch job
pbs_geterrmsg(3)
get error message for last pbs batch operation
pbs_terminate(3)
terminate a pbs batch server
pc-systemflag(1)
PC-BSD System inter-application notification system
pca_lookup_file(3), del_PathCache(3), del_PcaPathConf(3), new_PathCache(3), new_PcaPathConf(3), pca_last_error(3), pca_path_completions(3), pca_scan_path(3), pca_set_check_fn(3), ppc_file_start(3), ppc_literal_escapes(3)
lookup a file in a list of directories
pcap-filter(7)
packet filter syntax
pcap_compile(3)
compile a filter expression
pcap_geterr(3), pcap_perror(3)
get or print libpcap error message text
pcap_offline_filter(3)
check whether a filter matches a packet
pcap_open_dead(3), pcap_open_dead_with_tstamp_precision(3)
open a fake pcap_t for compiling filters or opening a capture for output
pcap_setfilter(3)
set the filter
pcgels(l), PCGELS(l)
solve overdetermined or underdetermined complex linear systems involving an M-by-N matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1),
pcgetf2(l), PCGETF2(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
pcgetrf(l), PCGETRF(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = (IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
PCI bus interface
pci_iov_schema(9), pci_iov_schema_alloc_node(9), pci_iov_schema_add_bool(9), pci_iov_schema_add_string(9), pci_iov_schema_add_uint8(9), pci_iov_schema_add_uint16(9), pci_iov_schema_add_uint32(9), pci_iov_schema_add_uint64(9), pci_iov_schema_add_unicast_mac(9)
PCI SR-IOV config schema interface
pcl3opts(1)
determine options for the ghostscript driver pcl3 from a PCL-3+ file
pclaconsb(l), PCLACONSB(l)
look for two consecutive small subdiagonal elements by seeing the effect of starting a double shift QR iteration given by H44, H33, & H43H34 and see if this would make a subdiagonal negligible
pclaswp(l), PCLASWP(l)
perform a series of row or column interchanges on the distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1)
pcp(1)
copy a file to a cluster of machines
pcre16_pattern_to_host_byte_order(3), PCRE(3)
Perl-compatible regular expressions
pcre2_get_ovector_pointer(3), PCRE2(3)
Perl-compatible regular expressions (revised API)
pcre2_match_data_create_from_pattern(3), PCRE2(3)
Perl-compatible regular expressions (revised API)
pcre2_pattern_info(3), PCRE2(3)
Perl-compatible regular expressions (revised API)
pcre2_set_character_tables(3), PCRE2(3)
Perl-compatible regular expressions (revised API)
pcre2pattern(3), PCRE2(3)
Perl-compatible regular expressions (revised API)
pcrepattern(3), PCRE(3)
Perl-compatible regular expressions
pcstein(l), PCSTEIN(l)
compute the eigenvectors of a symmetric tridiagonal matrix in parallel, using inverse iteration
pdb2mdb(1)
Program Database to Mono Debugging Symbol converter
pdbtool(1)
An application to test and convert syslog-ng pattern database rules
pdfembedfonts(1)
PDF Metadata Updater
pdfmetadata(1)
PDF Metadata Updater
pdfmom(1)
Produce PDF documents using the mom macro set co Copyright [co] 2012-2014 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English. . au This document was written by deri@chuzzlewit.demon.co.uk Deri James and peter@schaffter.ca Peter Schaffter
pdfpc(1)
PDF presenter console with multi-monitor support
pdfroff(1)
create PDF documents using groff co Copyright [co] 2005-2014 Free Software Foundation, Inc. This file is part of groff, the free GNU roff type-setting system. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License (FDL), Version 1.3 or any later version published by the Free Software Foundation; with no Front-Cover Texts, no Back-Cover Texts, and the following Invariant Sections:-- a) This "Legal Matters" section, extending from the definition of .co to the end of the enclosing .au definition. b) The entire sections bearing the heading "COPYING" and "AUTHORS". A copy of the Free Documentation License is included as a file called FDL in the main directory of the groff source package, it is also available in the internet at http://:www.gnu.org/:copyleft/:fdl.html the GNU copyleft site . . au It was originally written by keith.d.marshall@:ntlworld.com Keith Marshall , who also wrote the implementation of the pdfroff program, to which it relates. . pdfmark NH hy 0 \$* hy
pdftoppm(1)
Portable Document Format (PDF) to Portable Pixmap (PPM) converter (version 3.03)
pdftops(1)
Portable Document Format (PDF) to PostScript converter (version 3.03)
pdftotext(1)
Portable Document Format (PDF) to text converter (version 3.03)
pdgels(l), PDGELS(l)
solve overdetermined or underdetermined real linear systems involving an M-by-N matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1),
pdgetf2(l), PDGETF2(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
pdgetrf(l), PDGETRF(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = (IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
pdlaconsb(l), PDLACONSB(l)
look for two consecutive small subdiagonal elements by seeing the effect of starting a double shift QR iteration given by H44, H33, & H43H34 and see if this would make a subdiagonal negligible
pdlaed1(l), PDLAED1(l)
compute the updated eigensystem of a diagonal matrix after modification by a rank-one symmetric matrix,
pdlamch(l), PDLAMCH(l)
determine double precision machine parameters
pdlaswp(l), PDLASWP(l)
perform a series of row or column interchanges on the distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1)
pdstein(l), PDSTEIN(l)
compute the eigenvectors of a symmetric tridiagonal matrix in parallel, using inverse iteration
pentobi(6)
computer opponent for the board game Blokus
perl_performance(1), makepp_perl_performance(1)
-- How to make Perl faster
pescan(1)
identify suspicious characteristics in PE files
pf(4)
packet filter
pf.conf(5)
packet filter configuration file
pfctl(8)
control the packet filter (PF) device
pffinfo(1)
determines information about a Personal Folder File (OST, PAB and PST)
pfil(9), pfil_head_register(9), pfil_head_unregister(9), pfil_head_get(9), pfil_add_hook(9), pfil_add_hook_flags(9), pfil_remove_hook(9), pfil_remove_hook_flags(9), pfil_run_hooks(9), pfil_rlock(9), pfil_runlock(9), pfil_wlock(9), pfil_wunlock(9)
packet filter interface
pflog(4)
packet filter logging interface
pflogd(8)
packet filter logging daemon
pfsout(1)
Read pfs frames from stdin and write them in the format determined by the extension of the file name
pfstat(8)
collect packet filter statistics and generate graphs
pfstmo_durand02(1)
Fast bilateral filtering for the display of HDR images
pfsync(4)
packet filter state table sychronisation interface
pg_basebackup(1)
take a base backup of a PostgreSQL cluster
pg_controldata(1)
display control information of a PostgreSQL database cluster
pg_dumpall(1)
extract a PostgreSQL database cluster into a script file
pg_resetxlog(1)
reset the write-ahead log and other control information of a PostgreSQL database cluster
pg_test_fsync(1)
determine fastest wal_sync_method for PostgreSQL
pg_xlogdump(1)
display a human-readable rendering of the write-ahead log of a PostgreSQL database cluster
pgmtoimgv(1)
Portable Graymap to Pilot Image Viewer converter, version 2.0
ph_email_resolve(3), ph_advertised_email(3)
determine PH-redirected email addresses
ph_get_fieldinfo(3), ph_retrieve_fieldinfo(3), ph_fieldinfo_iterate(3), ph_decode_field_attributes(3)
access field information from PH server
ph_get_option(3), ph_retrieve_options(3), ph_set_option(3), ph_option_iterate(3)
show and set PH server options
ph_id(3), ph_external(3), ph_status(3)
miscellaneous functions for PH server connections
ph_retrieve_siteinfo(3), ph_get_siteinfo(3), ph_siteinfo_iterate(3)
access site-specific information from PH server
ph_serverlist_add(3), ph_serverlist_merge(3), ph_serverlist_iterate(3), ph_free_serverlist(3)
access list of known PH servers at other sites
ph_www_resolve(3), ph_advertised_www(3)
determine PH-redirected www addresses
phantasia(6)
an interterminal fantasy game
phonectl(1)
Control interface for the desktop telephony application
phosphor(6)
simulates an old terminal with long-sustain phosphor
php(1)
PHP Command Line Interface 'CLI' php-cgi - PHP Common Gateway Interface 'CGI' command
phpsh(1)
an interactive shell into a php codebase
picocom(1)
minimal dumb-terminal emulation program
piecewise(6)
lots of moving circles intersecting in interesting ways
pilot-dlpsh(1)
An interactive Desktop Link Protocol (DLP) Shell for your Palm device
pilot-foto(1)
Palm 'Foto' Image Installer/Remover/Fetcher/Converter
ping_iterator_get(3), ping_iterator_next(3)
Iterate over all hosts of a liboping object
ping_iterator_get_context(3), ping_iterator_set_context(3)
Store host-dependent data
ping_iterator_get_info(3)
Receive information about a host
pinion(6)
draws a scrolling sequence of interconnected gears
pioneersai(6)
Computer player for Pioneers
pipe(2), pipe2(2)
create descriptor pair for interprocess communication
pipe(8)
Postfix delivery to external command
pipeglade(1)
pipe-driven GTK+ interface
pipemeter(1)
measure speed of data going through a pipe/redirection
pkcsep11_migrate(1)
utility to re-encrypt EP11 token keys to prepare a change of master keys in the EP11 adapter
pkeyparam(1)
public key algorithm parameter processing tool
pkg-add(8), pkg add(8)
Registers a package and installs it on the system
pkg-register(8), pkg register(8)
register a package into the local package database
pkg-shell(8), pkg shell(8)
interact with the pkg database
pkpgcounter(1)
count number of pages required to print various types of documents
plan(1)
interactive X/Motif calendar and day planner pland - daemon for plan notifier - X/Motif text displayer for
playerctl(1)
Control interface for the media player
pload(1)
display network interface statistics in an X window
plot-netperfmeter-results(1)
Network Performance Meter
plotfont(1)
produce character maps of fonts supported by the plotting utilities SB \$1 \$2
pmap_enter(9)
insert a virtual page into a physical map
pmap_is_prefaultable(9)
determine if a page may be prefaulted
pmap_mincore(9)
determine if a virtual address is resident in physical memory
pmap_page_exists_quick(9)
determine if a page exists in a physical map
pmap_qenter(9), pmap_qremove(9)
manage temporary kernel space mappings
pmap_quick_enter_page(9), pmap_quick_remove_page(9)
manage fast, single-page kernel address space mappings
pmapfilter(3)
User-defined labels for IPs and protocol/port pairs
pmc(3)
library for accessing hardware performance monitoring counters
pmc.iaf(3)
measurement events for Intel fixed function performance counters
pmc.tsc(3)
measurements using the i386 timestamp counter
pmc.ucf(3)
measurement events for Intel uncore fixed function performance counters
pmc_allocate(3), pmc_release(3)
allocate and free performance monitoring counters
pmc_capabilities(3), pmc_cpuinfo(3), pmc_ncpu(3), pmc_npmc(3), pmc_pmcinfo(3), pmc_width(3)
retrieve information about performance monitoring counters
pmc_disable(3), pmc_enable(3)
administrative control of hardware performance counters
pmc_read(3), pmc_rw(3), pmc_write(3)
read and write hardware performance counters
pmccontrol(8)
control hardware performance monitoring counters
pmsd(8)
Periodically Manic System Daemon. Manages the bizzare and sometimes unexplainable behavior exhibited by computers
pmsft(1)
protocol-independent Multicast Source Filter Testing Tool
pngquant(1)
PNG converter and lossy image compressor
pnm2ppa(1)
convert portable anymap (PNM) images to HP's PPA printer format
podbeuter(1)
a podcast download manage for text terminals
polarablexpr(3)
moves inverters to the atomic level. man1/alc_origin.1
polardupablexpr(3)
duplicates an expression and moves down the inverters. man1/alc_origin.1
policyd-weight.conf(5)
policyd-weight configuration parameters
polkit-action(1)
List and modify registered PolicyKit actions
polyglot(6), PolyGlot(6)
Winboard protocol to UCI protocol adapter - book engine for Polyglot books - a collection of utilities for creating and analyzing opening books - a utility for analyzing epd files - a perft counter
polygraph(7), Polygraph(7)
performance benchmark for web intermediaries
polygraph-beepmon(1)
forwards BEEP messages to an external program
polygraph-pgl2eng(1)
PGL to English converter
polygraph-polymon(1)
interactive test monitoring tool
polygraph-reporter(1)
HTML report generator
ponscr(6)
the Ponscripter novel-game interpreter
ponscr-ext(7)
Ponscripter extension commands
ponscr-syntax(7)
description of Ponscripter syntax
ponscripter(7)
Ponscripter overview
portmaster(8)
manage your ports without external databases or languages
posix_openpt(2)
open a pseudo-terminal device
postconf(5)
Postfix configuration parameters
poster(1)
Scale and tile a postscript image to print on multiple pages
postmaster(1)
PostgreSQL database server
postnews(1cn)
simple interactive news-posting interface
poudriere(8)
bulk package builder and port tester
ppd_check_option_is_marked(3), ppd_mark_defaults(3), ppd_mark_option(3)
a set of functions for determining the current status of PPD options and selecting them
ppd_find_choice(3), ppd_find_marked_choice(3), ppd_find_option_by_keyword(3)
set of functions for returning pointers to choices from PPD files
ppi(4)
user-space interface to ppbus parallel 'geek' port
ppufiles(1)
The FPC Pascal unit object file lister
pqshell(1)
A shell-like to interact with a Postfix mails queue rst2man-indent-level 0 1 rstReportMargin \$1
preconv(1)
convert encoding of input files to something GNU troff understands co Copyright [co] 2006-2014 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English
prg2lout(1)
convert computer program text into Lout
printcap(5)
printer capability data base
printers.conf(5)
printer configuration file for cups
prison_check(9)
determine if two credentials belong to the same jail
prm(1)
delete a file or files on a cluster of machines
procd_ctl(1)
command line interface to the condor_procd
process(3bobcat), FBB::Process(3bobcat)
Runs external programs
procstat_close(3), procstat_freeargv(3), procstat_freeauxv(3), procstat_freeenvv(3), procstat_freefiles(3), procstat_freegroups(3), procstat_freekstack(3), procstat_freeprocs(3), procstat_freeptlwpinfo(3), procstat_freevmmap(3), procstat_get_pipe_info(3), procstat_get_pts_info(3), procstat_get_sem_info(3), procstat_get_shm_info(3), procstat_get_socket_info(3), procstat_get_vnode_info(3), procstat_getargv(3), procstat_getauxv(3), procstat_getenvv(3), procstat_getfiles(3), procstat_getgroups(3), procstat_getkstack(3), procstat_getosrel(3), procstat_getpathname(3), procstat_getprocs(3), procstat_getptlwpinfo(3), procstat_getrlimit(3), procstat_getumask(3), procstat_getvmmap(3), procstat_open_core(3), procstat_open_kvm(3), procstat_open_sysctl(3)
library interface for file and process information retrieval
profile2map(1)
Fuse profiler output converter
proj(1)
forward cartographic projection filter invproj - inverse cartographic projection filter
prometheus_sysctl_exporter(8)
print kernel state as Prometheus metrics
prompter(1)
prompting editor front-end for nmh
protracker(1)
Amiga ProTracker v2.3D clone for modern computers
proxsmtpd(8)
an SMTP server for performing filtering
ps2pdf(1)
Convert PostScript to PDF using ghostscript ps2pdf12 - Convert PostScript to PDF 1.2 (Acrobat 3-and-later compatible) using ghostscript ps2pdf13 - Convert PostScript to PDF 1.3 (Acrobat 4-and-later compatible) using ghostscript ps2pdf14 - Convert PostScript to PDF 1.4 (Acrobat 5-and-later compatible) using ghostscript
psftp(1)
interactive SFTP (secure file transfer protocol) client
psgels(l), PSGELS(l)
solve overdetermined or underdetermined real linear systems involving an M-by-N matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1),
psgetf2(l), PSGETF2(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
psgetrf(l), PSGETRF(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = (IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
psicc(1)
little cms PostScript converter
psiconv(1)
Psion 5 and other EPOC devices file converter
psif(8)
PostScript input filter splitter for lpr
pskc_get_key_data_counter(3)
API function
pskc_get_key_data_timeinterval(3)
API function
pskc_set_key_data_counter(3)
API function
pskc_set_key_data_timeinterval(3)
API function
pskgen(8)
Pre-shared key generater and converter for IKE
pslaconsb(l), PSLACONSB(l)
look for two consecutive small subdiagonal elements by seeing the effect of starting a double shift QR iteration given by H44, H33, & H43H34 and see if this would make a subdiagonal negligible
pslaed1(l), PSLAED1(l)
compute the updated eigensystem of a diagonal matrix after modification by a rank-one symmetric matrix,
pslamch(l), PSLAMCH(l)
determine single precision machine parameters
pslaswp(l), PSLASWP(l)
perform a series of row or column interchanges on the distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1)
psm-ipp(5)
Internet Print Protocol Print Service Module
psmandup(1)
print duplex on non duplex printers
psmerge(1)
filter to merge several PostScript files into one
psof(8)
PostScript output/banner filter for lpr
psppire(1)
graphical interface to pspp
psql(1)
PostgreSQL interactive terminal
psrev(1)
PostScript page reversal filter
psroff(1)
send troff to PostScript printer
psstein(l), PSSTEIN(l)
compute the eigenvectors of a symmetric tridiagonal matrix in parallel, using inverse iteration
pstops(1)
print filter helper program ppdfilt - insert printer specific code into a PS job
pterm(1)
(hy yet another X terminal emulator
pthread_atfork(3)
register fork handlers
pthread_exit(3)
terminate the calling thread
pthread_join(3), pthread_timedjoin_np(3)
wait for thread termination
pthread_rwlock_timedrdlock(3)
acquire a read-write lock for reading or give up after a specified period
pthread_rwlock_timedwrlock(3)
acquire a read-write lock for writing or give up after a specified period
pthread_setschedparam(3), pthread_getschedparam(3)
thread scheduling parameter manipulation
ptriter(3bobcat), FBB::PtrIter(3bobcat)
Iterator returning pointer when dereferenced
pts(4)
pseudo-terminal driver
pts_interactive(1)
Enters interactive mode
pts_listmax(1)
Displays the max user id and max group id counters
pts_quit(1)
Exit from pts interactive mode
pts_setmax(1)
Sets the value of the max group id or max user id counter
pty(1)
redirects terminal I/O to pseudo-terminal
pty(4)
BSD-style and System V-style compatibility pseudo-terminal driver
ptype(3)
mbk list of typed pointers
pulsar(6)
intersecting planes, alpha blending, fog, and textures
pulse-cli-syntax(5)
PulseAudio Command Line Interface Syntax
puppet-config(8)
Interact with Puppet's settings
puppet-epp(8)
Interact directly with the EPP template parser/renderer
puppet-master(8)
The puppet master daemon
puppet-parser(8)
Interact directly with the parser
puppet-plugin(8)
Interact with the Puppet plugin system
pure(1)
the Pure interpreter
pure-authd(8)
External authentication agent for Pure-FTPd
pure-uploadscript(8)
Automatically run an external program after a successful upload
pvm_kill(3)
Terminates a specified PVM process
pvm_reg_hoster(3)
Register task as PVM slave starter
pvm_reg_rm(3)
Register task as PVM resource manager
pvm_reg_tasker(3)
Register task as PVM task starter
pvm_scatter(3)
Sends to each member of a group a section of an array from a specified member of the group
pwait(1)
wait for processes to terminate
pwcview(1)
view video, create jpeg snapshots and alter settings of a webcam controlled by the pwc(4) driver
pwsafe(1)
commandline password database utility compatible with Counterpane's Passwordsafe
pwtool(1)
A command-line interface tool to libpwstor
pycallgraph(1)
command-line interface to pycallgraph
python2.7(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.3(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.4(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.5(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.6(1), python(1)
an interpreted, interactive, object-oriented programming language
pzgels(l), PZGELS(l)
solve overdetermined or underdetermined complex linear systems involving an M-by-N matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1),
pzgetf2(l), PZGETF2(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
pzgetrf(l), PZGETRF(l)
compute an LU factorization of a general M-by-N distributed matrix sub( A ) = (IA:IA+M-1,JA:JA+N-1) using partial pivoting with row interchanges
pzlaconsb(l), PZLACONSB(l)
look for two consecutive small subdiagonal elements by seeing the effect of starting a double shift QR iteration given by H44, H33, & H43H34 and see if this would make a subdiagonal negligible
pzlaswp(l), PZLASWP(l)
perform a series of row or column interchanges on the distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1)
pzstein(l), PZSTEIN(l)
compute the eigenvectors of a symmetric tridiagonal matrix in parallel, using inverse iteration
qadmin(1)
Easy to use admin console to examine and administer PgQ queues
qadsl(8), qADSL(8)
Auto-login & keep-alive for Internet connections
qalter(1)
alter pbs batch job
qcowinfo(1)
determines information about a QEMU Copy-On-Write (QCOW) image file
qemu-launcher(1)
Graphical front-end for the QEMU computer emulator
qhull(1)
convex hull, Delaunay triangulation, Voronoi diagram, halfspace intersection about a point, hull volume, facet area
qjackctl(1)
User interface for controlling JACK (Jack Audio Connection Kit)
qlnxe(4)
Cavium 25/40/100 Gigabit Ethernet & CNA Adapter Driver
qlxgb(4)
QLogic 10 Gigabit Ethernet & CNA Adapter Driver
qlxgbe(4)
QLogic 10 Gigabit Ethernet & CNA Adapter Driver
qlxge(4)
QLogic 8100 Series 10 Gigabit Ethernet Adapter Driver
qmail-qfilter(1)
front end for qmail-queue that does filtering
qmail-rblchk(1)
filter all incoming mail and check if it comes from RBL listed IPs
qore(1)
Interpreter for the Qore Programming Language
qpxtool(1)
a gui to control qpxtool command line interfaces (cli)
qsampler(1), Qsampler(1)
A LinuxSampler Qt GUI Interface
qsf(1)
quick spam filter
qsynth(1), Qsynth(1)
A fluidsynth Qt GUI Interface
qterm(8)
terminate processing by a PBS batch server
quake(7), quake-(7)
The Quake extension language and interpreter
quat_interpolate(3)
Constructs a quaternion representing a rotation between from and to. Allegro game programming library
quat_mul(3)
Multiplies two quaternions. Allegro game programming library
quat_slerp(3)
Version of quat_interpolate() allowing control over the rotation. Allegro game programming library
quat_to_matrix(3)
Constructs a rotation matrix from a quaternion. Allegro game programming library
qucsactivefilter(1), QucsFilter(1)
A filter synthesis application
qucsconv(1), QucsConverter(1)
Command line tool for data conversion
qucsfilter(1), QucsFilter(1)
A filter synthesis application
queue_splitter3(1)
PgQ consumer that transports events from one queue into several target queues
quickie-config(1)
print configuration parameters "quickie-config(1)" "print configuration parameters"
quorum_finalize(3)
Terminate a connection to the quorum service
quvi-dump09(1), quvi-dump(1)
The dull-witted property printer
r3d_objects(l), Object(l)
types used by the Raster3D package These are the object descriptor types, and the required parameters, recognized by the render program and other components of the Raster3D package
r3dtops(l)
Raster3D to PostScript label conversion
ra6(1)
A security assessment tool for attack vectors based on ICMPv6 Router Advertisement messages
racluster(1)
aggregate argus(8) data files
racluster(5), racluster.conf(5)
racluster flow model definitions
rad_counter(1)
Query and maintain FreeRADIUS rlm_counter DB file. This tool is deprecated
radctl(8)
Radius daemon control interface
radvd(8)
router advertisement daemon for IPv6
radvd.conf(5)
configuration file of the router advertisement daemon radvd
radvdump(8)
dump router advertisements
rafilteraddr(1)
select argus(8) data based on an IANA IP address file
ralabel(1)
inserts fixed form or free form metadata labels into argus(8). ralabel supports a number of strategies for labeling including 1) address based, providing free form metadata, country code, geo data and fully qualified domain name (FQDN) labeling; 2)port based, providing free form labels using IANA port definitions, and 3) flow filter, providing free form labels based on argus filter specicfications
rancid(1)
Cisco configuration filter
random(3), srandom(3), srandomdev(3), initstate(3), setstate(3)
better random number generator; routines for changing generators
randpktdump(1)
Provide an interface to generate random captures using randpkt
rastep(l)
(Raster3D Thermal Ellipsoid Program)
raster3d(l), Raster3D(l)
molecular graphics package
rax2(1)
radare base converter
rcorder(8)
print a dependency ordering of interdependent files
rdisc6(8), rdisc(8)
ICMPv6 Router Discovery tool
rdma_dereg_mr(3)
deregisters a registered memory region
rdma_reg_msgs(3)
register data buffer(s) for sending or receiving messages
rdma_reg_read(3)
register data buffer(s) for remote RDMA read access
rdma_reg_write(3)
register data buffer(s) for remote RDMA write access
re(4)
RealTek 8139C+/8169/816xS/811xS/8168/810xE/8111 PCI/PCIe Ethernet adapter driver
readkey(3)
Returns the next character from the keyboard buffer. Allegro game programming library
readxs(1)
Display xs-httpd counter file information
rec2csv(1)
rec to csv converter
recoll(1)
user interface for the Recoll full text search system
recover(6)
recover a NetHack game interrupted by disaster
refcount(9), refcount_init(9), refcount_acquire(9), refcount_release(9)
manage a simple reference counter
regfinfo(1)
determines information about a Windows NT Registry File (REGF)
regina(1)
The Regina Rexx Interpreter
regina-config(1)
Developer Configuration for The Regina Rexx interpreter
register_assert_handler(3)
Registers a custom handler for assert failures. Allegro game programming library
register_bitmap_file_type(3)
Registers custom bitmap loading/saving functions. Allegro game programming library
register_config_handler(3), register_const_config_handler(3), register_prenetsnmp_mib_handler(3), unregister_config_handler(3), register_mib_handlers(3), unregister_all_config_handlers(3), register_app_config_handler(3), register_app_prenetsnmp_mib_handler(3), unregister_app_config_handler(3), read_configs(3), read_premib_configs(3), read_config_print_usage(3), config_perror(3), config_pwarn(3)
netsnmp_config_api functions
register_datafile_object(3)
Registers load/destroy functions for custom object types. Allegro game programming library
register_font_file_type(3)
Register a new font loading function. Allegro game programming library
register_sample_file_type(3)
Registers custom loading/saving sample routines. Allegro game programming library
register_trace_handler(3)
Registers a custom handler for trace output. Allegro game programming library
register_uformat(3)
Installs handler functions for a new text encoding format. Allegro game programming library
registervm(1), unregistervm(1)
register/unregister a Java VM
regutil(1)
RexxUtil library for Regina REXX interpreter
remove_param_int(3)
Removes a timer with a customizable parameter. Allegro game programming library
remove_sound(3)
Cleans up after you are finished with the sound routines. Allegro game programming library
remove_sound_input(3)
Cleans up after you are finished with the sound input routines. Allegro game programming library
render(l)
Raster3D molecular graphics package rendering program
renice(8)
alter priority of running processes
reorderbddsystemdynamic(3)
specifies the dynamic bdd reorder parameters. man1/alc_origin.1
rep(1)
Librep Interpreter
reptyr(1)
Reparent a running program to a new terminal
resettodr(9)
set battery-backed clock from system time
residualvm(6)
interpreter for several 3D games
resize(1)
set environment and terminal settings to current xterm window size
resizewin(1)
update terminal size
restoretextmode(1)
save or restore the SVGA registers for textmode
retawq(1)
a multi-threaded web browser for text terminals
retroarch-cg2glsl(6)
Shader converter
revoke(1)
revoke a character device
rg(1)
recursively search current directory for lines matching a pattern
ribbon(l)
Raster3D molecular graphics package ribbon-drawer
rigsmtr(1)
measure S-Meter vs azimuth using Hamlib
rinetd(8)
internet redirection server
ring(1), RING(1)
PAD RING router
ripples(6)
interference patterns
rkhunter(8)
RootKit Hunter
rleinterp(1), rleintrp(1)
Interpolate between 2 RLE images
rlestereo(1)
produce anaglyph from stereo pair
rlm_attr_filter(5)
FreeRADIUS Module
rlm_counter(5)
FreeRADIUS Module
rlpq(1)
remote line printer queue examination program
rlprm(1)
remove jobs from a remote line printer spooling queue
rlvm(6)
RealLive interpreter clone
rmlock(9), rm_init(9), rm_init_flags(9), rm_destroy(9), rm_rlock(9), rm_try_rlock(9), rm_wlock(9), rm_runlock(9), rm_wunlock(9), rm_wowned(9), rm_sleep(9), rm_assert(9), RM_SYSINIT(9), RM_SYSINIT_FLAGS(9)
kernel reader/writer lock optimized for read-mostly access patterns
rocks(6)
animation of flying through an asteroid field
rodent-diff(1), Rodent-diff(1)
Graphic interface to the GNU diff and patch commands
rodent-fgr(1), Rodent-fgr(1)
Graphic interface to the fgr command
rodent-pkg(1), Rodent-pkg(1)
Graphic interface to the pkg command
rods(l)
Raster3D preprocessor for ball-and-stick models
roff2dvi(1)
transform roff code into dvi mode co Copyright [co] 2006-2014 Free Software Foundation, Inc. This file is part of groffer, which is part of GNU groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . au This file was written by groff-bernd.warken-72@web.de Bernd Warken . . t .ds EL N'188' .ds EL .|.|
roff2html(1)
transform roff code into html mode co Copyright [co] 2006-2014 Free Software Foundation, Inc. This file is part of groffer, which is part of GNU groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . au This file was written by groff-bernd.warken-72@web.de Bernd Warken . . t .ds EL N'188' .ds EL .|.|
roff2pdf(1)
transform roff code into pdf mode co Copyright [co] 2006-2014 Free Software Foundation, Inc. This file is part of groffer, which is part of GNU groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . au This file was written by groff-bernd.warken-72@web.de Bernd Warken . . t .ds EL N'188' .ds EL .|.|
roff2ps(1)
transform roff code into ps mode co Copyright [co] 2006-2014 Free Software Foundation, Inc. This file is part of groffer, which is part of GNU groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . au This file was written by groff-bernd.warken-72@web.de Bernd Warken . . t .ds EL N'188' .ds EL .|.|
roff2text(1)
transform roff code into text mode co Copyright [co] 2006-2014 Free Software Foundation, Inc. This file is part of groffer, which is part of GNU groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . au This file was written by groff-bernd.warken-72@web.de Bernd Warken . . t .ds EL N'188' .ds EL .|.|
roff2x(1)
transform roff code into x mode co Copyright [co] 2006-2014 Free Software Foundation, Inc. This file is part of groffer, which is part of GNU groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation. The license text is available in the internet at http://www.gnu.org/licenses/gpl-2.0.html . . au This file was written by groff-bernd.warken-72@web.de Bernd Warken . . t .ds EL N'188' .ds EL .|.|
rofi-sensible-terminal(1)
launches $TERMINAL with fallbacks
rorschach(6)
simulate ink-blot patterns
ros(1)
Command line utility to list information from RouterOS devices
roundup-demo(1)
create a roundup "demo" tracker and launch its web interface
routed(8), rdisc(8)
network RIP and router discovery routing daemon
router(8)
XML packet distributor
router.db(5)
rancid group configuration file
roxterm(1)
terminal emulator
roxterm-config(1)
terminal emulator
rpc_clnt_calls(3), clnt_call(3), clnt_freeres(3), clnt_geterr(3), clnt_perrno(3), clnt_perror(3), clnt_sperrno(3), clnt_sperror(3), rpc_broadcast(3), rpc_broadcast_exp(3), rpc_call(3)
library routines for client side calls
rpc_gss_set_callback(3)
Register a security context creation callback
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_reg(3), rpc_reg(3), svc_reg(3), svc_unreg(3), svc_auth_reg(3), xprt_register(3), xprt_unregister(3)
library routines for registering servers
rpmatch(3)
determine whether the response to a question is affirmative or negative
rpp(3), rpp_open(3), rpp_bind(3), rpp_poll(3), rpp_io(3), rpp_read(3), rpp_write(3), rpp_close(3), rpp_getaddr(3), rpp_flush(3), rpp_terminate(3), rpp_shutdown(3), rpp_rcommit(3), rpp_wcommit(3), rpp_eom(3), rpp_getc(3), rpp_putc(3)
reliable packet protocol
rrd_hwreapply(1)
Re-apply Holt-Winters prediction parameters to RRD data
rrdresize(1)
alters the size of an RRA and creates a new .rrd file
rrenumd(8)
router renumbering daemon
rrenumd.conf(5)
configuration file for router renumbering daemon
rs6(1)
A security assessment tool for attack vectors based on ICMPv6 Router Solicitation messages
rseq(1)
run a command on a cluster in sequence
rspamd(8)
main daemon for rapid spam filtering system
rspterminal(1)
RSerPool terminal (PU) for services like Echo, Discard, Daytime, CharGen
rstconv(1)
The Free Pascal resource string converter tool
rsvg-convert(1)
turn SVG files into raster images
rtadvd(8)
router advertisement daemon
rtadvd.conf(5)
config file for router advertisement daemon
rtsold(8), rtsol(8)
router solicitation daemon
rtv(1), RTV(1)
Reddit Terminal Viewer
rubibtex(1)
make a bibliography for (La)TeX using Russian letters as item names
ruby22(1), ruby(1)
Interpreted object-oriented scripting language
ruby23(1), ruby(1)
Interpreted object-oriented scripting language
ruby24(1), ruby(1)
Interpreted object-oriented scripting language
rude(8)
real-time UDP data emitter
rumakeindex(1)
process a LaTeX index using Russian Cyrillic characters
runawk(1)
wrapper for AWK interpreter
runawk_modules(3), runawk(3)
wrapper for AWK interpreter
runidn(1)
A script to allow applications to use internationalized domain names
runscript(1)
script interpreter for minicom
rwfglob(1)
Print files that rwfilter's File Selection switches will access
rwfilter(1)
Choose which SiLK Flow records to process
rwguess(8)
Determine which SNMP interfaces are active
rwidsquery(1)
invoke rwfilter to find flows matching Snort signatures
rwlock(9), rw_init(9), rw_init_flags(9), rw_destroy(9), rw_rlock(9), rw_wlock(9), rw_runlock(9), rw_wunlock(9), rw_unlock(9), rw_try_rlock(9), rw_try_upgrade(9), rw_try_wlock(9), rw_downgrade(9), rw_sleep(9), rw_initialized(9), rw_wowned(9), rw_assert(9), RW_SYSINIT(9), RW_SYSINIT_FLAGS(9)
kernel reader/writer lock
rwpackchecker(8)
Find unusual patterns that may indicate a corrupt file
rwpmatch(1)
Filter a tcpdump file using a SiLK Flow file
rwsetmember(1)
Determine whether IP address(es) are members of an IPset
rwtuc(1)
Text Utility Converter - rwcut output to SiLK flows
rxqueue(1)
The Regina Rexx Interpreter external queue filter
rxstack(1)
The Regina Rexx Interpreter stack daemon
s7(1)
interpreter for the Seed7 programming language
sabcmd(1)
a command line interface to Sablotron XSLT processor
safe_asterisk(8)
A wrapper to run the asterisk executable in a loop
saga_cmd(1)
command-line interface to the System for Automated Geoscientific Analyses
saga_gui(1)
graphical user interface to the System for Automated Geoscientific Analyses
sakura(1)
A simple but powerful libvte-based terminal emulator
salt-master(1)
salt-master Documentation rst2man-indent-level 0 1 rstReportMargin \$1
sam_finalize(3)
Terminate SAM service
sam_hc_callback_register(3)
Register health check callback
sam_register(3), sam_rehister(3)
Register component for health checking
sane-as6e(5)
SANE backend for using the Artec AS6E parallel port interface scanner
sane-kodakaio(5)
SANE backend for Kodak aio printer / scanners
sane-pixma(5)
SANE backend for Canon Multi-Function Printers and CanoScan Scanners
sane-scsi(5)
SCSI adapter tips for scanners
sansi(1)
-- StripANSI; strip ANSI escape sequences/characters from text files
saoimage(1), SAOimage 1.23(1)
X11 window based, interactive, color or halftone image display program for astronomical images
sc_AVLMap_iterator(3), sc::AVLMap<(3)
K, T >::iterator
sc_AVLSet_iterator(3), sc::AVLSet<(3)
K >::iterator
sc_AlgorithmException(3), sc::AlgorithmException(3)
This exception is thrown whenever a problem with an algorithm is encountered
sc_AssignedKeyVal(3), sc::AssignedKeyVal(3)
This class allows keyval associations to be set up by the program, rather than determined by an external file
sc_BcastState(3), sc::BcastState(3)
This creates and forwards/retrieves data from either a BcastStateRecv or a BcastStateSend depending on the value of the argument to constructor
sc_BcastStateRecv(3), sc::BcastStateRecv(3)
BcastStateRecv does the receive part of a broadcast of an object to all nodes
sc_BendSimpleCo(3), sc::BendSimpleCo(3)
The BendSimpleCo class describes an bend internal coordinate of a molecule
sc_CartesianIter(3), sc::CartesianIter(3)
CartesianIter gives the ordering of the Cartesian functions within a shell for the particular integrals specialization
sc_CharacterTable(3), sc::CharacterTable(3)
The CharacterTable class provides a workable character table for all of the non-cubic point groups
sc_Convergence(3), sc::Convergence(3)
The Convergence class is used by the optimizer to determine when an optimization is converged
sc_Debugger(3), sc::Debugger(3)
The Debugger class describes what should be done when a catastrophic error causes unexpected program termination
sc_DerivCenters(3), sc::DerivCenters(3)
DerivCenters keeps track the centers that derivatives are taken with respect to
sc_EAVLMMap_iterator(3), sc::EAVLMMap<(3)
K, T >::iterator
sc_ElectronDensity(3), sc::ElectronDensity(3)
This is a Volume that computer the electron density
sc_GuessMolecularHessian(3), sc::GuessMolecularHessian(3)
GuessMolecularHessian is an implementation of MolecularHessian that estimates the hessian based on the internal coordinates
sc_InputError(3), sc::InputError(3)
This is thrown when invalid input is provided
sc_Int2eCints(3), sc::Int2eCints(3)
Int2eCints is an interface to various specializations of two-electron integral evaluators implemented in Cints
sc_IntCoor(3), sc::IntCoor(3)
The IntCoor abstract class describes an internal coordinate of a molecule
sc_IntCoorGen(3), sc::IntCoorGen(3)
IntCoorGen generates a set of simple internal coordinates for a molecule
sc_IntMolecularCoor(3), sc::IntMolecularCoor(3)
The IntMolecularCoor abstract class describes a molecule's coordinates in terms of internal coordinates
sc_LinIPSimpleCo(3), sc::LinIPSimpleCo(3)
The LinIPSimpleCo class describes an in-plane component of a linear bend internal coordinate of a molecule
sc_LinOPSimpleCo(3), sc::LinOPSimpleCo(3)
The LinOPSimpleCo class describes an out-of-plane component of a linear bend internal coordinate of a molecule
sc_MOPairIter(3), sc::MOPairIter(3)
MOPairIter gives the ordering of orbital pairs
sc_MOPairIterFactory(3), sc::MOPairIterFactory(3)
This class produces MOPairIter objects
sc_MaxIterExceeded(3), sc::MaxIterExceeded(3)
This is thrown when an iterative algorithm attempts to use more iterations than allowed
sc_MsgStateRecv(3), sc::MsgStateRecv(3)
The MsgStateRecv is an abstract base class that receives objects from nodes in a MessageGrp
sc_OneBodyIntCCA(3), sc::OneBodyIntCCA(3)
This implements one body integrals through the CCA interface
sc_OneBodyOneCenterDerivInt(3), sc::OneBodyOneCenterDerivInt(3)
OneBodyOneCenterDerivInt is an abstract base class for objects that compute one body derivative integrals on a single center
sc_OneBodyOneCenterInt(3), sc::OneBodyOneCenterInt(3)
OneBodyOneCenterInt is an abstract base class for objects that compute integrals between two basis functions
sc_PW92LCFunctional(3), sc::PW92LCFunctional(3)
Implements the PW92 local (LSDA) correlation term
sc_Parameter(3), sc::Parameter<(3)
T >
sc_PointGroup(3), sc::PointGroup(3)
The PointGroup class is really a place holder for a CharacterTable
sc_PumaThreadGrp(3), sc::PumaThreadGrp(3)
The PumaThreadGrp class privides a concrete thread group appropriate for the intel teraflops machine
sc_R12Amplitudes(3), sc::R12Amplitudes(3)
R12Amplitudes gives the amplitudes of some linear-R12-ansatz-related terms in wave function
sc_R12IntEval(3), sc::R12IntEval(3)
R12IntEval is the top-level class which computes intermediates occuring in linear R12 theories
sc_R12IntEvalInfo(3), sc::R12IntEvalInfo(3)
Class R12IntEvalInfo contains information necessary for R12 intermediate evaluators
sc_RedundMolecularCoor(3), sc::RedundMolecularCoor(3)
The RedundMolecularCoor class provides a redundant set of simple internal coordinates
sc_RedundantCartesianIter(3), sc::RedundantCartesianIter(3)
RedundantCartesianIter objects loop through all possible combinations of a given number of axes
sc_RedundantCartesianSubIter(3), sc::RedundantCartesianSubIter(3)
Like RedundantCartesianIter, except a, b, and c are fixed to a given value
sc_RefDiagSCMatrix(3), sc::RefDiagSCMatrix(3)
The RefDiagSCMatrix class is a smart pointer to an DiagSCMatrix specialization
sc_RefSCDimension(3), sc::RefSCDimension(3)
The RefSCDimension class is a smart pointer to an SCDimension specialization
sc_RefSCMatrix(3), sc::RefSCMatrix(3)
The RefSCMatrix class is a smart pointer to an SCMatrix specialization
sc_RefSCVector(3), sc::RefSCVector(3)
The RefSCVector class is a smart pointer to an SCVector specialization
sc_RefSymmSCMatrix(3), sc::RefSymmSCMatrix(3)
The RefSymmSCMatrix class is a smart pointer to an SCSymmSCMatrix specialization
sc_SCDimension(3), sc::SCDimension(3)
The SCDimension class is used to determine the size and blocking of matrices
sc_SCMatrixBlockIter(3), sc::SCMatrixBlockIter(3)
The SCMatrixBlockIter class is used to described iterates that loop through the elements in a block
sc_SCMatrixSubblockIter(3), sc::SCMatrixSubblockIter(3)
Objects of class SCMatrixSubblockIter are used to iterate through the blocks of a matrix
sc_ScaledTorsSimpleCo(3), sc::ScaledTorsSimpleCo(3)
The ScaledTorsSimpleCo class describes an scaled torsion internal coordinate of a molecule
sc_SelfConsistentExtrapolation(3), sc::SelfConsistentExtrapolation(3)
The SelfConsistentExtrapolation abstract class is used to iteratively solve equations requiring a self consistent solution, such as,
sc_SetIntCoor(3), sc::SetIntCoor(3)
The SetIntCoor class describes a set of internal coordinates
sc_SimpleCo(3), sc::SimpleCo(3)
The SimpleCo abstract class describes a simple internal coordinate of a molecule
sc_SlaterXFunctional(3), sc::SlaterXFunctional(3)
Implements the Slater exchange functional
sc_SpatialMOPairIter(3), sc::SpatialMOPairIter(3)
SpatialMOPairIter gives the ordering of pairs of spatial orbitals
sc_SpatialMOPairIter_eq(3), sc::SpatialMOPairIter_eq(3)
SpatialMOPairIter_eq gives the ordering of same-spin and different-spin orbital pairs if both orbitals of the pairs are from the same space
sc_SpatialMOPairIter_neq(3), sc::SpatialMOPairIter_neq(3)
SpatialMOPairIter_neq gives the ordering of pairs of spatial orbitals from different spaces
sc_SphericalTransformIter(3), sc::SphericalTransformIter(3)
This iterates through the components of a SphericalTransform
sc_StateRecv(3), sc::StateRecv(3)
StateRecv is a concrete specialization of MsgStateRecv that does the receive part of point to point communication in a MessageGrp
sc_StreSimpleCo(3), sc::StreSimpleCo(3)
The StreSimpleCo class describes an stretch internal coordinate of a molecule
sc_SumIntCoor(3), sc::SumIntCoor(3)
SumIntCoor is used to construct linear combinations of internal coordinates
sc_Thread(3), sc::Thread(3)
The Thread abstract class defines an interface which must be implemented by classes wishing to be run as threads
sc_Timer(3), sc::Timer(3)
The Timer class uses RegionTimer to time intervals in an exception safe manner
sc_TorsSimpleCo(3), sc::TorsSimpleCo(3)
The TorsSimpleCo class describes an torsion internal coordinate of a molecule
sc_TranslateDataByteSwap(3), sc::TranslateDataByteSwap(3)
Data translation to an external representation with bytes swapped
sc_TwoBodyDerivIntCCA(3), sc::TwoBodyDerivIntCCA(3)
This implements two body derivative integrals through the CCA interface
sc_TwoBodyIntCCA(3), sc::TwoBodyIntCCA(3)
This implements two body integrals through the CCA interface
sc_TwoBodyThreeCenterDerivInt(3), sc::TwoBodyThreeCenterDerivInt(3)
This is an abstract base type for classes that compute three centers integrals involving two electrons
sc_TwoBodyThreeCenterInt(3), sc::TwoBodyThreeCenterInt(3)
This is an abstract base type for classes that compute integrals involving two electrons in three Gaussian functions
sc_TwoBodyThreeCenterIntV3(3), sc::TwoBodyThreeCenterIntV3(3)
This implements electron repulsion integrals involving three centers in the IntV3 library
sc_TwoBodyTwoCenterDerivInt(3), sc::TwoBodyTwoCenterDerivInt(3)
This is an abstract base type for classes that compute two centers integrals involving two electrons