Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
retrieve the tag type from an ACL entry
set ACL tag qualifier
set the tag type of an ACL entry
ASUSTeK AI Booster ACPI ATK0110 voltage, temperature and fan sensor
driver for the Altera JTAG UART Core
bus_dma(9), bus_dma_tag_create(9), bus_dma_tag_destroy(9), bus_dma_template_init(9), bus_dma_template_tag(9), bus_dma_template_clone(9), bus_dma_template_fill(9), BUS_DMA_TEMPLATE_FILL(9), bus_dmamap_create(9), bus_dmamap_destroy(9), bus_dmamap_load(9), bus_dmamap_load_bio(9), bus_dmamap_load_ccb(9), bus_dmamap_load_crp(9), bus_dmamap_load_crp_buffer(9), bus_dmamap_load_mbuf(9), bus_dmamap_load_mbuf_sg(9), bus_dmamap_load_uio(9), bus_dmamap_unload(9), bus_dmamap_sync(9), bus_dmamem_alloc(9), bus_dmamem_free(9)
Bus and Machine Independent DMA Mapping Interface
create a tags file
dwarf_get_ACCESS_name(3), dwarf_get_AT_name(3), dwarf_get_ATE_name(3), dwarf_get_CC_name(3), dwarf_get_CFA_name(3), dwarf_get_CHILDREN_name(3), dwarf_get_DS_name(3), dwarf_get_DSC_name(3), dwarf_get_EH_name(3), dwarf_get_END_name(3), dwarf_get_FORM_name(3), dwarf_get_ID_name(3), dwarf_get_INL_name(3), dwarf_get_LANG_name(3), dwarf_get_LNE_name(3), dwarf_get_LNS_name(3), dwarf_get_MACINFO_name(3), dwarf_get_OP_name(3), dwarf_get_ORD_name(3), dwarf_get_TAG_name(3), dwarf_get_VIRTUALITY_name(3), dwarf_get_VIS_name(3)
retrieve the symbolic names of DWARF constants
retrieve the tag for an abbreviation
retrieve the tag associated with a DWARF debugging information entry
kernel bootstrapping final stage
a framework for generic packet attributes
mbuf tags manipulating netgraph node type
IEEE 802.1Q VLAN tagging netgraph node type
post a work request to send a datagram
rman(9), rman_activate_resource(9), rman_adjust_resource(9), rman_deactivate_resource(9), rman_fini(9), rman_init(9), rman_init_from_resource(9), rman_is_region_manager(9), rman_manage_region(9), rman_first_free_region(9), rman_last_free_region(9), rman_release_resource(9), rman_reserve_resource(9), rman_reserve_resource_bound(9), rman_make_alignment_flags(9), rman_get_start(9), rman_get_end(9), rman_get_device(9), rman_get_size(9), rman_get_flags(9), rman_set_mapping(9), rman_get_mapping(9), rman_set_virtual(9), rman_get_virtual(9), rman_set_bustag(9), rman_get_bustag(9), rman_set_bushandle(9), rman_get_bushandle(9), rman_set_rid(9), rman_get_rid(9)
resource management functions
RDMA CM datagram setup and simple ping-pong test
Internet User Datagram Protocol
Lightweight User Datagram Protocol
ASN1_tag2str(3), ASN1_STRING_print_ex(3), ASN1_STRING_print_ex_fp(3), ASN1_STRING_print(3)
ASN1_STRING output routines
ASN1_mbstring_copy(3), ASN1_mbstring_ncopy(3), ASN1_STRING_set_by_NID(3), ASN1_STRING_set_default_mask(3), ASN1_STRING_set_default_mask_asc(3), ASN1_STRING_get_default_mask(3), ASN1_tag2bit(3)
copy a multibyte string into an ASN.1 string object
ASN1_tag2str(3), ASN1_STRING_print_ex(3), ASN1_STRING_print_ex_fp(3), ASN1_STRING_print(3)
ASN1_STRING output routines
ASN1_tag2str(3ossl), ASN1_STRING_print_ex(3ossl), ASN1_STRING_print_ex_fp(3ossl), ASN1_STRING_print(3ossl)
ASN1_STRING output routines
Embedded Data Systems Sensors EDS0064 - Temperature EDS0065 - Temperature and Humidity EDS0066 - Temperature and Barometric Pressure EDS0067 - Temperature and Light EDS0068 - Temperature, Barometric Pressure and Light EDS0070 - Vibration EDS0071 - RTD 4-wire temperature EDS0072 - RTD 3-wire temperature EDS0080 - 8 Channel Analog Current Input EDS0082 - 8 Channel Analog Voltage Input EDS0083 - 4 Channel Analog Current Input EDS0085 - 4 Channel Analog Voltage Input EDS0090 - 8 Discrete I/O
EVP_AEAD_CTX_new(3), EVP_AEAD_CTX_free(3), EVP_AEAD_CTX_init(3), EVP_AEAD_CTX_cleanup(3), EVP_AEAD_CTX_open(3), EVP_AEAD_CTX_seal(3), EVP_AEAD_key_length(3), EVP_AEAD_max_overhead(3), EVP_AEAD_max_tag_len(3), EVP_AEAD_nonce_length(3), EVP_aead_aes_128_gcm(3), EVP_aead_aes_256_gcm(3), EVP_aead_chacha20_poly1305(3), EVP_aead_xchacha20_poly1305(3)
authenticated encryption with additional data
EVP_CIPHER_fetch(3ossl), EVP_CIPHER_up_ref(3ossl), EVP_CIPHER_free(3ossl), EVP_CIPHER_CTX_new(3ossl), EVP_CIPHER_CTX_reset(3ossl), EVP_CIPHER_CTX_free(3ossl), EVP_EncryptInit_ex(3ossl), EVP_EncryptInit_ex2(3ossl), EVP_EncryptUpdate(3ossl), EVP_EncryptFinal_ex(3ossl), EVP_DecryptInit_ex(3ossl), EVP_DecryptInit_ex2(3ossl), EVP_DecryptUpdate(3ossl), EVP_DecryptFinal_ex(3ossl), EVP_CipherInit_ex(3ossl), EVP_CipherInit_ex2(3ossl), EVP_CipherUpdate(3ossl), EVP_CipherFinal_ex(3ossl), EVP_CIPHER_CTX_set_key_length(3ossl), EVP_CIPHER_CTX_ctrl(3ossl), EVP_EncryptInit(3ossl), EVP_EncryptFinal(3ossl), EVP_DecryptInit(3ossl), EVP_DecryptFinal(3ossl), EVP_CipherInit(3ossl), EVP_CipherFinal(3ossl), EVP_Cipher(3ossl), EVP_get_cipherbyname(3ossl), EVP_get_cipherbynid(3ossl), EVP_get_cipherbyobj(3ossl), EVP_CIPHER_is_a(3ossl), EVP_CIPHER_get0_name(3ossl), EVP_CIPHER_get0_description(3ossl), EVP_CIPHER_names_do_all(3ossl), EVP_CIPHER_get0_provider(3ossl), EVP_CIPHER_get_nid(3ossl), EVP_CIPHER_get_params(3ossl), EVP_CIPHER_gettable_params(3ossl), EVP_CIPHER_get_block_size(3ossl), EVP_CIPHER_get_key_length(3ossl), EVP_CIPHER_get_iv_length(3ossl), EVP_CIPHER_get_flags(3ossl), EVP_CIPHER_get_mode(3ossl), EVP_CIPHER_get_type(3ossl), EVP_CIPHER_CTX_cipher(3ossl), EVP_CIPHER_CTX_get0_cipher(3ossl), EVP_CIPHER_CTX_get1_cipher(3ossl), EVP_CIPHER_CTX_get0_name(3ossl), EVP_CIPHER_CTX_get_nid(3ossl), EVP_CIPHER_CTX_get_params(3ossl), EVP_CIPHER_gettable_ctx_params(3ossl), EVP_CIPHER_CTX_gettable_params(3ossl), EVP_CIPHER_CTX_set_params(3ossl), EVP_CIPHER_settable_ctx_params(3ossl), EVP_CIPHER_CTX_settable_params(3ossl), EVP_CIPHER_CTX_get_block_size(3ossl), EVP_CIPHER_CTX_get_key_length(3ossl), EVP_CIPHER_CTX_get_iv_length(3ossl), EVP_CIPHER_CTX_get_tag_length(3ossl), EVP_CIPHER_CTX_get_app_data(3ossl), EVP_CIPHER_CTX_set_app_data(3ossl), EVP_CIPHER_CTX_flags(3ossl), EVP_CIPHER_CTX_set_flags(3ossl), EVP_CIPHER_CTX_clear_flags(3ossl), EVP_CIPHER_CTX_test_flags(3ossl), EVP_CIPHER_CTX_get_type(3ossl), EVP_CIPHER_CTX_get_mode(3ossl), EVP_CIPHER_CTX_get_num(3ossl), EVP_CIPHER_CTX_set_num(3ossl), EVP_CIPHER_CTX_is_encrypting(3ossl), EVP_CIPHER_param_to_asn1(3ossl), EVP_CIPHER_asn1_to_param(3ossl), EVP_CIPHER_CTX_set_padding(3ossl), EVP_enc_null(3ossl), EVP_CIPHER_do_all_provided(3ossl), EVP_CIPHER_nid(3ossl), EVP_CIPHER_name(3ossl), EVP_CIPHER_block_size(3ossl), EVP_CIPHER_key_length(3ossl), EVP_CIPHER_iv_length(3ossl), EVP_CIPHER_flags(3ossl), EVP_CIPHER_mode(3ossl), EVP_CIPHER_type(3ossl), EVP_CIPHER_CTX_encrypting(3ossl), EVP_CIPHER_CTX_nid(3ossl), EVP_CIPHER_CTX_block_size(3ossl), EVP_CIPHER_CTX_key_length(3ossl), EVP_CIPHER_CTX_iv_length(3ossl), EVP_CIPHER_CTX_tag_length(3ossl), EVP_CIPHER_CTX_num(3ossl), EVP_CIPHER_CTX_type(3ossl), EVP_CIPHER_CTX_mode(3ossl)
EVP cipher routines
Create CACHEDIR.TAG at cache directory
Returns tags that can be used in communication with a communicator
Returns tags allocated with MPE_GetTags
Returns the private keyval
Process to transform digest messages - final stage
Process to transform messages - first stage
Process to transform messages - second stage
Get TIFF field tag value from field information
TIFFGetField(3tiff), TIFFVGetField(3tiff)
get the value(s) of a tag in an open TIFF file
TIFFSetField(3tiff), TIFFVSetField(3tiff)
set the value(s) of a tag in a TIFF file open for writing
Tk_CanvasDrawableCoords.tk85(3), Tk_CanvasTkwin(3), Tk_CanvasGetCoord(3), Tk_CanvasDrawableCoords(3), Tk_CanvasSetStippleOrigin(3), Tk_CanvasWindowCoords(3), Tk_CanvasEventuallyRedraw(3), Tk_CanvasTagsOption(3)
utility procedures for canvas type managers
Tk_CanvasDrawableCoords.tk86(3), Tk_CanvasTkwin(3), Tk_CanvasGetCoord(3), Tk_CanvasDrawableCoords(3), Tk_CanvasSetStippleOrigin(3), Tk_CanvasWindowCoords(3), Tk_CanvasEventuallyRedraw(3), Tk_CanvasTagsOption(3)
utility procedures for canvas type managers
A font list function that retrieves the tag of a font list entry "XmFontListEntryGetTag" "font list functions" "XmFontListEntryGetTag"
A compound string function that returns the compound text encoding format associated with the specified font list tag "XmMapSegmentEncoding" "compound string functions" "XmMapSegmentEncoding"
A compound string function that registers a compound text encoding format for a specified font list element tag "XmRegisterSegment\%Encoding" "compound string functions" "XmRegisterSegment\%Encoding"
A convenience function that matches a rendition tag "XmRenderTableGetRendition"
A convenience function that matches rendition tags "XmRenderTableGetRenditions"
A convenience function that gets rendition tags "XmRenderTableGetTags"
afew Documentation afew is an initial tagging script for notmuch mail: 0.0 (bu 2 % (bu 2 % Its basic task is to provide automatic tagging each time new mail is registered with notmuch. In a classic setup, you might call it after notmuch new in an offlineimap post sync hook or in the notmuch post-new hook. It can do basic thing such as adding tags based on email headers or maildir folders, handling killed threads and spam. fyi: afew plays nicely with alot, a GUI for notmuch mail ;) 0.0 (bu 2 % Contents:
part-of-speech tagger and trainer for Apertium
rule enforcer for Apertium
transition rule validator for Apertium
utility to aggregate net matrix objects in time domain
utility to aggregate port table objects in time domain
API function
API function
graphical threads-with-tags style, lightweight and fast, e-mail client for Notmuch
attrtag_model(3), attrtag_model (3)
Set 3d model rendering-specific flags
BATV (Bounce Address Tag Validation) filter for sendmail
music tagger and library organizer rst2man-indent-level 0 1 rstReportMargin \$1
ber_get_next(3), ber_skip_tag(3), ber_peek_tag(3), ber_scanf(3), ber_get_int(3), ber_get_enum(3), ber_get_stringb(3), ber_get_stringa(3), ber_get_stringal(3), ber_get_stringbv(3), ber_get_null(3), ber_get_boolean(3), ber_get_bitstring(3), ber_first_element(3), ber_next_element(3)
OpenLDAP LBER simplified Basic Encoding Rules library routines for decoding
ber_int_t(3), ber_uint_t(3), ber_len_t(3), ber_slen_t(3), ber_tag_t(3), struct berval(3), BerValue(3), BerVarray(3), BerElement(3), ber_bvfree(3), ber_bvecfree(3), ber_bvecadd(3), ber_bvarray_free(3), ber_bvarray_add(3), ber_bvdup(3), ber_dupbv(3), ber_bvstr(3), ber_bvstrdup(3), ber_str2bv(3), ber_alloc_t(3), ber_init(3), ber_init2(3), ber_free(3)
OpenLDAP LBER types and allocation functions
bindtags.tk85(n), bindtags(n)
Determine which bindings apply to a window, and order of evaluation
bindtags.tk86(n), bindtags(n)
Determine which bindings apply to a window, and order of evaluation
UrJTAG declaration file conversion
camtag_model(3), camtag_model (3)
Define a camera for the 3D processing of a rendertarget
Print a random tagline
file listing number of times each tagged sense occurs in a semantic concordance, sorted most to least frequently tagged cntlist.rev - file listing number of times each tagged sense occurs in a semantic concordance, sorted by sense key
anagram game
Generate tag files for source code
Export tag structure of photos in digikam to the filesystem
A UDP datagram header
tag editor for MP3, Ogg Vorbis files and more
eclat-lstag(1), eclat-describe-tags(1)
list the EC2 tags
eclat-mktag(1), eclat-create-tags(1)
create or replace tags for a resource
eclat-rmtag(1), eclat-delete-tags(1)
delete or replace tags for a resource
etags(1), ctags(1)
generate tag file for Emacs, vi
Generate tag files for source code
audio tag editor rst2man-indent-level 0 1 rstReportMargin \$1
display or set the UserComment tag contained in a JPEG Exif section
output the properties contained in a JPEG Exif section
display or adjust date & time Exif tags; list files ordered by their Exif date & time tags
Tagged data transfer operations fi_trecv / fi_trecvv / fi_trecvmsg Post a buffer to receive an incoming message fi_tsend / fi_tsendv / fi_tsendmsg / fi_tinject / fi_tsenddata Initiate an operation to send a message
Apply tags to flow files
Apply tags to flow files
freefare_get_tags(3), freefare_get_tag_type(3), freefare_get_tag_friendly_name(3), freefare_get_tag_uid(3), freefare_free_tag(3), freefare_free_tags(3)
Generic target manipulation functions
Generate signatures with random taglines on a FIFO
Delete tags
Creates a tag object with extra validation
Pack heads and tags for efficient repository access
Commit, tag and push changes to the repository
Rename a tag
Add file contents to the staging area
Create, list, delete or verify a tag object signed with GPG
Check the GPG signature of tags
API function
API function
create tag files for global
interactively examine a C program
configuration data for GNU Global
generate a hypertext from a set of source files
a private Web/CGI server for htags
JTAG ICE frontend for avr-gdb ice-insight - JTAG ICE frontend for avr-insight
a command line mass tagger
edit id3 description tags in mpeg3 files
Reads and writes ID3 tags from mp3 files
a command line editor for id3 tags
image_tracetag(3), image_tracetag (3)
Set or retrieve a tracing tag for the specified video object
Img, Tagged Image File Format (tiff)
Generate tag files for source code
UrJTAG command shell
Learn calculating with fractions and percentages
kid3(1), kid3-qt(1), kid3-cli(1)
Kid3 ID3 Tagger
ldns_calc_keytag(3), ldns_calc_keytag_raw(3)
calculate ldns keytag
ldns_key_list_key_count(3), ldns_key_list_key(3), ldns_key_rsa_key(3), ldns_key_dsa_key(3), ldns_key_algorithm(3), ldns_key_hmac_key(3), ldns_key_origttl(3), ldns_key_inception(3), ldns_key_expiration(3), ldns_key_keytag(3), ldns_key_pubkey_owner(3), ldns_key_flags(3)
read ldns_keys
ldns_key_set_algorithm(3), ldns_key_set_rsa_key(3), ldns_key_set_dsa_key(3), ldns_key_set_hmac_key(3), ldns_key_set_origttl(3), ldns_key_set_inception(3), ldns_key_set_expiration(3), ldns_key_set_pubkey_owner(3), ldns_key_set_keytag(3), ldns_key_set_flags(3), ldns_key_list_set_key_count(3), ldns_key_algo_supported(3)
set ldns_key attributes
ldns_rr_rrsig_typecovered(3), ldns_rr_rrsig_set_typecovered(3), ldns_rr_rrsig_algorithm(3), ldns_rr_rrsig_set_algorithm(3), ldns_rr_rrsig_labels(3), ldns_rr_rrsig_set_labels(3), ldns_rr_rrsig_origttl(3), ldns_rr_rrsig_set_origttl(3), ldns_rr_rrsig_expiration(3), ldns_rr_rrsig_set_expiration(3), ldns_rr_rrsig_inception(3), ldns_rr_rrsig_set_inception(3), ldns_rr_rrsig_keytag(3), ldns_rr_rrsig_set_keytag(3), ldns_rr_rrsig_signame(3), ldns_rr_rrsig_set_signame(3), ldns_rr_rrsig_sig(3), ldns_rr_rrsig_set_sig(3)
get and set RRSIG RR rdata fields
libowfat_fmt_asn1dertag(3), fmt_asn1dertag(3)
encode unsigned integer like ASN.1 DER tag
libowfat_scan_asn1dertag(3), scan_asn1dertag(3)
decode an unsigned integer from ASN.1 DER length encoding
libowfat_socket_recv4(3), socket_recv4(3)
receive a UDP datagram
libowfat_socket_recv6(3), socket_recv6(3)
receive a UDP datagram
libowfat_socket_send4(3), socket_send4(3)
send a UDP datagram
libowfat_socket_send6(3), socket_send6(3)
send a UDP datagram
libowfat_socket_udp4(3), socket_udp4(3)
create a non-blocking UDP/IP datagram socket
libowfat_socket_udp6(3), socket_udp6(3)
create a non-blocking IPv6 UDP/IP datagram socket
list_target_tags(3), list_target_tags (3)
retrieve a list of tags used by tagets
Get tags of a data
create a composite image by combining several separate images. The images are tiled on the composite image optionally adorned with a border, frame, image name, and more
Convert MP3 tags to Unicode
NFC Forum tag type 2 emulation command line demonstration tool
NFC Forum tag type 4 emulation command line demonstration tool
Simple tag emulation command line demonstration tool
Extract NDEF Message from a NFC Forum Tag Type 3
thread-based email index, search, and tagging
creates a plain-text dump of the tags of each message
restores the tags from the given file (see notmuch dump)
add/remove tags for all messages matching the search terms
command line music tagger rst2man-indent-level 0 1 rstReportMargin \$1
Ogg Opus tag editor
Perl Audio Converter, a multi purpose converter/ripper/tagger
request that files for a pbs batch job be staged in
Set or remove tags to/from pfs stream
pmemobj_tx_begin(3), pmemobj_tx_stage()(3), pmemobj_tx_begin()(3), pmemobj_tx_lock()(3), pmemobj_tx_abort()(3), pmemobj_tx_commit()(3), pmemobj_tx_end()(3), pmemobj_tx_errno()(3), pmemobj_tx_process()(3), TX_BEGIN_PARAM()(3), TX_BEGIN_CB()(3), TX_BEGIN()(3), TX_ONABORT(3), TX_ONCOMMIT(3), TX_FINALLY(3), TX_END(3)
transactional object manipulation
create a montage of PNM images synopsis
Modify tags on snapshots
music player and library for tagged files using GStreamer
Tag similar SiLK records with a common next hop IP value
samtools-addreplacerg(1), samtools addreplacerg(1)
adds or replaces read group tags EX in +\$1 nf ft CR . EE ft fi in
samtools-calmd(1), samtools calmd(1)
calculates MD and NM tags EX in +\$1 nf ft CR . EE ft fi in
Formats SGML files tagged according to the linuxdoc DTD
Stag Prom Programmer binary format require_index { }
Stag Prom Programmer hexadecimal format require_index { }
Texas Instruments Tagged (SDSMAC) file format require_index { }
Texas Instruments Tagged (SDSMAC 320) file format require_index { }
tag_image_transform(3), tag_image_transform (3)
Associate a callback with a transformation chain slot
tags groups of audio files using CDDB
manipulate ID3v1 tags
tagged files used for clustering extensions
tag line testing program
edit and display music files tags
add tags to intervals
display a list of tags
remove tags from intervals
Add, remove and list tags
trafd(8), -(8)
-tag -width 9n -compact trafd ip traffic collector daemon. trafdump Script to dump current traffic to disk. trafsave Script to save current traffic to disk. trafstart Startup script for trafd. trafstop Shutgown script for trafd. Start/stop script for trafd, placed to the local startup directory ( */rc.d)
uctags-client-tools(7), ctags-client-tools(7)
Hints for developing a tool using ctags command and tags output
uctags-faq(7), ctags-faq(7)
Universal Ctags FAQ This is the Universal Ctags FAQ (Frequently-Asked Questions). It is based on %Exuberant Ctags FAQ
uctags-incompatibilities(7), ctags-incompatibilities(7)
Incompatibilities between Universal Ctags and Exuberant Ctags
uctags-lang-gdscript(7), ctags-lang-gdscript(7)
Random notes about tagging GDScript source code with Universal Ctags
uctags-lang-iPythonCell(7), ctags-lang-iPythonCell(7)
The man page of the iPythonCell parser for Universal Ctags
uctags-lang-julia(7), ctags-lang-julia(7)
Random notes about tagging Julia source code with Universal-ctags
uctags-lang-python(7), ctags-lang-python(7)
Random notes about tagging python source code with Universal Ctags
uctags-lang-r(7), ctags-lang-r(7)
Random notes about tagging R source code with Universal Ctags
uctags-lang-sql(7), ctags-lang-sql(7)
The man page of the SQL parser for Universal Ctags
uctags-lang-tcl(7), ctags-lang-tcl(7)
Random notes about tagging tcl source code with Universal Ctags
uctags-lang-verilog(7), ctags-lang-verilog(7)
The man page about SystemVerilog/Verilog parser for Universal Ctags
uctags-optlib(7), ctags-optlib(7)
Universal Ctags parser definition language
parse a Squid log file and show URL category percentages
ureadtags(1), readtags(1)
Find tag file entries matching specified names
utags(5), tags(5)
Vi tags file format extended in ctags projects
a versatile open-source tool for microbiome analysis, including chimera detection, clustering, dereplication and rereplication, extraction, FASTA/FASTQ/SFF file processing, masking, orienting, pairwise alignment, restriction site cutting, searching, shuffling, sorting, subsampling, and taxonomic classification of amplicon sequences for metagenomics, genomics, and population genetics
river tags module
metadata utility for wavpack files
Change the length of the percentage bar or slider
stage one or more files
Algorithm::Evolutionary::Op::Convergence_Terminator(3), Algorithm::Evolutionary::Op::Convergence_Terminator (3)
Checks for termination of an algorithm, returns true if a certain percentage of the population is the same
list/add/remove tags for the current repository
App::Sqitch::Command::tag(3), Header "Name" App::Sqitch::Command::tag(3)
Add or list tags in Sqitch plans
App::Sqitch::Plan::Change(3), Header "Name" App::Sqitch::Plan::Change(3)
Sqitch deployment plan tag
App::Sqitch::Plan::Tag(3), Header "Name" App::Sqitch::Plan::Tag(3)
Sqitch deployment plan tag
Tag tests with duration (short medium long) using a source log
Tie class for a simple ASCII database
Module for FastAGI handling
An object-oriented interface to Monkey's Audio file information and APE tag fields
a song object with some audio tags
An object-oriented interface to Musepack file information and APE tag fields
Fast C metadata and tag reader for all common audio file formats
simple timing of stages of your code
Biber::LangTag objects
AnnotationI with tree-like hierarchal key-value relationships ('structured tags') that can be represented as simple text
A sectioned map of configuration options (a map of maps), with a default section. Intended to augment existing tag->value semantics (ie. of Bio::AnnotationCollectionI) for object-representation information (eg. foreground color), and for general interface preferences (eg. image width in gbrowse)
The "pentagram" glyph
An abstract class providing methods for handling tab-delimited files
maps $seq_feature->primary_tag
maps $seq_feature->primary_tag
Bio::Tools::Run::Primate(3), Wrapper(3)
for Primate, Guy Slater's near exact match finder for short sequence tags
A Simple Tree Node with support for NHX tags
Block comments which have undue strong tags
An API for hierarchical tag/value structures
Simple persistent storage for Stone tag/value objects
Read and write tag/value data from an input stream
Read and write tag/value data from a string
Replace tags with text and geometry
show timing information about cgiapp stages
(NBS/ISCC S) Postage-Stamp Color Names
Result class for the cvs tag command
Result class for the cvs tag command
Data::Stag(3), Data::Stag(3)
Structured Tags datastructures
Data::Stag::Arr2HTML(3), Data::Stag::Arr2HTML(3)
Array to HTML handler
Data::Stag::BaseGenerator(3), Data::Stag::BaseGenerator (3)
base class for parsers and other event generators
Data::Stag::BaseHandler(3), Data::Stag::BaseHandler (3)
Base class for writing tag stream handlers
Data::Stag::ChainHandler(3), Data::Stag::ChainHandler(3)
Chain Handler
Data::Stag::DTDWriter(3), Data::Stag::DTDWriter(3)
DTD Writer
Data::Stag::GraphHandler(3), Data::Stag::GraphHandler(3)
Graph Handler
Data::Stag::HashDB(3), Data::Stag::HashDB(3)
build indexes over Stag files or objects
Data::Stag::ITextParser(3), (3)
parses stag IText format into stag events
Data::Stag::ITextWriter(3), Data::Stag::ITextWriter(3)
writes stag events into stag IText format
Data::Stag::IndentParser(3), (3)
parses stag indent format into stag events
Data::Stag::IndentWriter(3), Data::Stag::IndentWriter(3)
writes stag events into stag indent format
Data::Stag::JSONWriter(3), Data::Stag::JSONWriter(3)
writes stag events into JSON files
Data::Stag::PerlWriter(3), Data::Stag::PerlWriter(3)
writes stag events into perl POD documentation
Data::Stag::PodParser(3), (3)
parses perl POD documentation into stag events
Data::Stag::SAX2Stag(3), Data::Stag::SAX2Stag(3)
converts SAX events into Stag events
Data::Stag::Simple(3), Data::Stag::Simple(3)
Data::Stag::StagDB(3), Data::Stag::StagDB(3)
persistent storage and retrieval of stag nodes
Data::Stag::StagImpl(3), Data::Stag::StagImpl(3)
default implementation for Data::Stag
Data::Stag::SxprParser(3), (3)
parses Stag S-expression format
Data::Stag::SxprWriter(3), Data::Stag::SxprWriter(3)
writes Stag S-expression format
Data::Stag::Writer(3), Data::Stag::Writer(3)
base class for all Writers
Data::Stag::XMLParser(3), (3)
parses XML files into stag events
Data::Stag::XMLWriter(3), Data::Stag::XMLWriter(3)
writes stag events into XML files
Data::Stag::XSLHandler(3), Data::Stag::XSLHandler(3)
XSL Handler
Data::Stag::XSLTHandler(3), Data::Stag::XSLTHandler(3)
XSLT Handler
Data::Stag::null(3), Data::Stag::Arr2HTML(3)
Represents a set of tags for any item
Represents a single tag
adds SNMP specific tags to Encoding::BER
contains information about %Foo tags handled by plugins
Flash video file data structure
Flash video file data structure
Flash video file data structure
Flash video file data structure
Obtain quotes from
Obtain currency rates from
Utilities for TrueType/OpenType tags
Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ --instance=app1-dev instead of: $ --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
HTML tag generators
wrapper for GtkTextTag
wrapper for GtkTextTagTable
Follow Only On Selected Tags
Escape tag
Handle multi-page/stage forms with FormFu
base class for single-tag elements
button field rendering widget, using button tag
set HTML attributes on the form tag
generate mobile-jp html tags
generate object object download HTML tag
generate GPS tags
Defines a tag object needed by HTML::Prototype
Strip unwanted HTML tags and attributes
Generate An HTML Tag Cloud
HTML::TagCloud extension
A fine-grained html-filter, xss-blocker and mailto-obfuscator
Yet another HTML document parser with DOM-like methods
data tables useful in parsing HTML
HTML::TokeParser::Simple::Token::Tag(3) tag class
HTML::TokeParser::Simple::Token::Tag::End(3) "end tag" class
HTML::TokeParser::Simple::Token::Tag::Start(3) "start tag" class
(beta software) truncate HTML by percentage or character count while preserving well-formedness
append guid=ON on each anchor tag and form action
A filter that outputs only complete tags
functions for dealing with RFC3066-style language tags
detect the user's language preferences
-- tags and names for human languages
Apple EXIF maker notes tags
Build ExifTool tag lookup tables
Canon EXIF maker notes tags
Casio EXIF maker notes tags
DJI Phantom maker notes tags
Darwin Core XMP tags
General Imaging maker notes tags
EXIF GPS meta information tags
Geotagging utility routines
Hewlett-Packard maker notes tags
JVC EXIF maker notes tags
Kodak EXIF maker notes and APP3 "Meta" tags
MNG and JNG meta information tags
Read/write MacOS system tags
Definitions for custom Microsoft tags
Minolta EXIF maker notes tags
Nikon EXIF maker notes tags
Nintendo EXIF maker notes tags
Olympus/Epson maker notes tags
PLUS (Picture Licensing Universal System) tags
Panasonic/Leica maker notes tags
Pentax/Asahi maker notes tags
Phase One maker notes tags
Reconyx maker notes tags
Ricoh EXIF maker notes tags
Samsung EXIF maker notes tags
Sanyo EXIF maker notes tags
ExifTool shortcut tags
Sigma/Foveon EXIF maker notes tags
Sony EXIF maker notes tags
Definitions for Stereo Still Image tags
Read/write tag information XML database
Fast lookup for ExifTool tags
ExifTool tag name documentation
Unknown EXIF maker notes tags
This document contains a collection of tag tables for JPEG segments; it is an appendix to the main manual page of the Image::MetaData::JPEG module, which the reader should refer to for further details and the general scope
surround highlight bits with tags
time the different stages of an HTTP request
Part-of-speech tagger for English natural language processing
formats caller information
a dynamic tag string
formats caller information
a log priority tag string
a constant tag string
user-defined tags to add to every log
Remove unwanted XML / XHTML tags and attributes
Adds XML markup to XML / XHTML content
Search and sort MP3 files based on their ID3 tags
Edit ID3v1 Tags from an Audio MPEG Layer 3
Module for reading tags of MP3 audio files
Module for parsing CDDB files
Module for parsing .cue files
Module for reading / writing files
Module for reading / writing ID3v1 tags of MP3 audio files
Read / Write ID3v2.3 tags from mp3 audio files
get_frame() data format and supported frames
get_frame() data format and supported frames
extract size info from image files via Image::ExifTool
extract size info from image files via Image::Size
Module for parsing .inf files associated with music tracks
Module for using other fields to fill autoinfo fields
Module for parsing arbitrary data associated with music files
Assorted utilities for manipulating MP3 files via MP3::Tag
Parses and creates ID3v2 Tags for MPEG audio files
Mail::SpamAssassin::Plugin::AskDNS(3), AskDNS(3)
form a DNS query using tag values, and look up the DNSxL lists
Mail::SpamAssassin::Plugin::PhishTag(3), PhishTag(3)
SpamAssassin plugin for redirecting links in incoming emails
tags for SpamAssassin rules The plugin allows rules to contain regular expression tags to be used in regular expression rules. The tags make it much easier to maintain complicated rules. Warning: This plugin relies on data structures specific to this version of SpamAssassin; it is not guaranteed to work with other versions of SpamAssassin
List of tags
Tags controller
store page tags
resultset methods on tags
Tag helpers plugin
Tag a class as a runnable application
Moose constraint - Etag format
Internal class to perform PutBucketTagging operation
Internal class to build PutObjectTagging requests
An internal class to handle PutBucketTagging responses
Internal class to perform DeleteBucketTagging operation
Internal class to build PutObjectTagging requests
An internal class to handle DeleteBucketTagging responses
Internal class to perform PutObjectTagging operation
Internal class to build PutObjectTagging request
An internal class to handle PutObjectTagging responses
Internal class to perform DeleteObjectTagging operation
Internal class to build PutObjectTagging requests
An internal class to handle DeleteObjectTagging responses
tagging query action role
Add tags request parts common to Bucket and Object
OOP for tag thingies
decode and encode NetFlow/IPFIX datagrams
User Datagram Protocol layer object
User Datagram Protocol layer 4 object
decode sFlow datagrams
Assemble and disassemble UDP (User Datagram Protocol) packets
give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
a common message class for POE::Stage
internal base class for POE::Stage response messages
a base class for message-driven objects
a base class for POE::Stage applications
a stage that echoes back whatever it's given
a simple UDP recv/send component
a simple non-blocking DNS resolver
a periodic message generator for POE::Stage
a base class for POE::Stage's event watchers
Completely useless content after the _|_END_|_ tag
The _|_DATA_|_ and _|_END_|_ tags
Efficiently parse exuberant ctags files
Arguments for method CreateOrUpdateTags on Paws::AutoScaling
Arguments for method DeleteTags on Paws::AutoScaling
Arguments for method DescribeTags on Paws::AutoScaling
Arguments for method AddTagsToOnPremisesInstances on Paws::CodeDeploy
Arguments for method RemoveTagsFromOnPremisesInstances on Paws::CodeDeploy
Arguments for method DisableStageTransition on Paws::CodePipeline
Arguments for method EnableStageTransition on Paws::CodePipeline
Arguments for method AddTags on Paws::DataPipeline
Arguments for method RemoveTags on Paws::DataPipeline
Arguments for method CreateTags on Paws::EC2
Arguments for method DeleteTags on Paws::EC2
Arguments for method DescribeTags on Paws::EC2
Arguments for method CreateTags on Paws::EFS
Arguments for method DeleteTags on Paws::EFS
Arguments for method DescribeTags on Paws::EFS
Arguments for method AddTags on Paws::ELB
Arguments for method DescribeTags on Paws::ELB
Arguments for method RemoveTags on Paws::ELB
Arguments for method AddTags on Paws::EMR
Arguments for method RemoveTags on Paws::EMR
Arguments for method AddTagsToResource on Paws::ElastiCache
Arguments for method ListTagsForResource on Paws::ElastiCache
Arguments for method RemoveTagsFromResource on Paws::ElastiCache
Arguments for method AddTagsToVault on Paws::Glacier
Arguments for method ListTagsForVault on Paws::Glacier
Arguments for method RemoveTagsFromVault on Paws::Glacier
Arguments for method AddTagsToStream on Paws::Kinesis
Arguments for method ListTagsForStream on Paws::Kinesis
Arguments for method RemoveTagsFromStream on Paws::Kinesis
Arguments for method AddTagsToResource on Paws::RDS
Arguments for method ListTagsForResource on Paws::RDS
Arguments for method RemoveTagsFromResource on Paws::RDS
Arguments for method CreateTags on Paws::RedShift
Arguments for method DeleteTags on Paws::RedShift
Arguments for method DescribeTags on Paws::RedShift
Paws::Route53::ChangeTagsForResourceResponse(3), Paws::Route53::(3)
Arguments for method on Paws::Route53
Paws::Route53::ListTagsForResourceResponse(3), Paws::Route53::(3)
Arguments for method on Paws::Route53
Paws::Route53::ListTagsForResourcesResponse(3), Paws::Route53::(3)
Arguments for method on Paws::Route53
Arguments for method DeleteTagsForDomain on Paws::Route53Domains
Arguments for method ListTagsForDomain on Paws::Route53Domains
Arguments for method UpdateTagsForDomain on Paws::Route53Domains
Paws::S3::GetBucketTaggingOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Export symbols via "@EXPORT_OK" or "%EXPORT_TAGS" instead of "@EXPORT"
processes PerlPoint tag declarations
declares basic PerlPoint tags
PerlPoint tag set used by pp2html
PerlPoint tag set used by pp2latex
PerlPoint tag set used by pp2sdf
Github v3 Git Data Tags API
Bulkfeeds Terms API for auto-tagging
Degrade YouTube object tags
Fetch tags and users count from
Fix tags
Auto-find enclosures from entry content using <a> / <embed> tags
Fetch tags from Hatena Bookmark
Hatena::Keyword API for auto-tagging
Strip tags from entry title
add tags to entry title
Check if a process matches based on the CPU usaged percentage
handle the stream start/end tags
RDF Store proxy for filtering language tagged literals
An image tag or non-image alternative
a thing with a list of tags
Object representation of the "option" HTML tag
Object representation of the "img" HTML tag
Object representation of the "label" HTML tag
Object representation of the "link" HTML tag
Object representation of the "script" HTML tag
Classes of SWF tags and elements. See Element.pod for further information
In-memory storage for hierarchical tag/value data structures
Traverse tags and values of a Stone
String::Tagged(3), "String::Tagged"(3)
string buffers with value tags on extents
String::Tagged::Formatting(3), "String::Tagged::Formatting"(3)
an API specification for simple formatted strings
String::Tagged::Terminal(3), "String::Tagged::Terminal"(3)
format terminal output using "String::Tagged"
String::Tagged::Terminal::Win32Console(3), "String::Tagged::Terminal::Win32Console"(3)
Windows-specific code for String::Tagged::Terminal
a Plugin for txt2tags syntax highlighting
Base class for tag sets used by Template::Declare::Tags
Template::Declare tag set for HTML
Template::Declare tag set for RDF
Template::Declare TAG set for Mozilla's em-rdf
Template::Declare tag set for XUL
Build and install XML Tag subroutines for Template::Declare
DSL for building complex stage-based preload tools
Abstraction of a preload stage
Representation of a persistent stage process
parses "folksonomy" space-separated tags (stub module)
parses "folksonomy" space-separated tags
The same as Kolon but using [% ... %] tags
Determine which bindings apply to a window, and order of evaluation
VM::EC2::ELB::TagDescription(3), VM::EC2::ELB:TagDescription(3)
Load Balancer Tag Description
Automate VMs and volumes for moving data in and out of cloud
High level interface to EC2-based servers
High level functions for provisioning and populating EC2 volumes
-- Object describing a tagged Amazon EC2 resource
-- Interchange tag interpolation routines
Adds HEAD tag parsing to WWW::Mechanize
Get the YouTube itags
Process method tag
Process object tag
Process regclass tag
Component for method tag
Base class wrapping json atom feed entry tags for google data API v2
Abstract class representing an xml node/tag
switch to the staging server
part of Woothee For Woothee, see
A class representing a definition in an <!ATTLIST> tag
A class representing an <!ELEMENT> tag
a generic element (tag) object
parse XML and specify what and how to keep/process for individual tags
Tag URI object class for YAML
rename an audio file via information got via MP3::Tag
bk-describe(1), bk describe(1)
generate a tag-based release name
bk-tag(1), bk tag(1)
tag the repository with a symbolic name bk tags - list tagged changesets
bk-untag(1), bk untag(1)
delete the symbolic namd in the repository
randomly mutagenize a single protein or DNA sequence
Builds a region from existing solids that have specifically formatted names based on the provided tags and numbers
tag a commit in the bup repository
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.21.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex:, (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d -d -w /var/www/thing -d -d (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{",":"/www/eg1/", "":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"":"/var/www"}. (default: {}) P
first pass for formal SGML parse of HelpTag source
first pass for loose (shorthand) parse of HelpTag source
second pass for parse of HelpTag source
compile CDE Help source documents into runtime Help volumes
markup syntax specification for authored XCDE help information
find tags in Interchange catalogs and directories
Adds/Modifies/Removes/Views id3v2 tags, converts/lists id3v1 tags
malloc(3), mallocz(3), free(3), realloc(3), calloc(3), setmalloctag(3), setrealloctag(3), getmalloctag(3), getrealloctag(3)
memory allocator
copy ID3 tags rst2man-indent-level 0 1 rstReportMargin \$1
convert ID3 tag encodings rst2man-indent-level 0 1 rstReportMargin \$1
audio tag editor similar to 'id3v2' rst2man-indent-level 0 1 rstReportMargin \$1
Find MP3 files based on their ID3 tags or info
MP3 technical info viewer and ID3 tag editor
get/set MP3 tags; uses MP3::Tag to get default values
view Mutagen-supported audio tags rst2man-indent-level 0 1 rstReportMargin \$1
scan a collection of MP3 files rst2man-indent-level 0 1 rstReportMargin \$1
Modify package distribution tags
Compaq ownership tag retriever
list albums, photos, tags, or comments from Google Picasa Web
Tool to convert Warcraft II map pud files to Stratagus map format
Compute Information Content from SemCor sense-tagged corpus
Compute Information Content from SemCor corpus (raw form, without using sense-tags)
sqitch-tag(3), Header "Name" sqitch-tag(3)
Create or list tag objects
sqitch-tag-usage(3), Header "Name" sqitch-tag-usage(3)
Sqitch tag usage statement, stag-autoschema(1)
writes the implicit stag-schema for a stag file, stag-db(1)
persistent storage and retrieval for stag data (xml, sxpr, itext), stag-diff(1)
finds the difference between two stag files, stag-drawtree(1)
draws a stag file (xml, itext, sxpr) as a PNG diagram, stag-filter(1)
filters a stag file (xml, itext, sxpr) for nodes of interest, stag-findsubtree(1)
finds nodes in a stag file, stag-flatten(1)
turns stag data into a flat table, stag-grep(1)
filters a stag file (xml, itext, sxpr) for nodes of interest, stag-handle(1)
streams a stag file through a handler into a writer, stag-itext2simple(1)
converts between stag formats, stag-itext2sxpr(1)
converts between stag formats, stag-itext2xml(1)
converts between stag formats, stag-join(1)
joins two stag files together based around common key
script wrapper for the Data::Stag modules, stag-mogrify (1)
mangle stag files, stag-parse(1)
parses a file and fires events (e.g. sxpr to xml), stag-query(1)
aggregare queries, stag-splitter(1)
splits a stag file into multiple files, stag-view(1)
draws an expandable Tk tree diagram showing stag data, stag-xml2itext(1)
converts between stag formats
static git page generator
static git index page generator
Strategy Gaming Engine
internal tag reader for strawberry
text_colorizer(1), $> text_colorizer(1)
transforms a text file with embeded color tags to HTML or ANSI
Warcraft II data game set for the Stratagus engine
home | help