Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3)
SNMP daemon loadable module interface
acpi_rapidstart(4)
Intel rapid start technology ACPI driver
del_curterm(3), mvcur(3), putp(3), restartterm(3), set_curterm(3), setterm(3), setupterm(3), tigetflag(3), tigetnum(3), tigetstr(3), tiparm(3), tparm(3), tputs(3), vid_attr(3), vid_puts(3), vidattr(3), vidputs(3)
curses interfaces to terminfo database
devstat(9), devstat_end_transaction(9), devstat_end_transaction_bio(9), devstat_end_transaction_bio_bt(9), devstat_new_entry(9), devstat_remove_entry(9), devstat_start_transaction(9), devstat_start_transaction_bio(9)
kernel interface for keeping device statistics
dwarf_find_macro_value_start(3)
return the address of the first byte of a macro value
dwarf_start_macro_file(3)
mark the start of a source file inclusion
growfs(7)
start up script to grow the root file-system
kproc_start(9), kproc_shutdown(9), kproc_create(9), kproc_exit(9), kproc_resume(9), kproc_suspend(9), kproc_suspend_check(9)
kernel processes
kthread_start(9), kthread_shutdown(9), kthread_add(9), kthread_exit(9), kthread_resume(9), kthread_suspend(9), kthread_suspend_check(9)
kernel threads
makewhatis.local(8)
start makewhatis for local file systems
mbrlen(3)
get number of bytes in a character (restartable)
mbrtowc(3), mbrtoc16(3), mbrtoc32(3)
convert a character to a wide-character code (restartable)
mbsrtowcs(3), mbsnrtowcs(3)
convert a character string to a wide-character string (restartable)
moncontrol(3), monstartup(3)
control execution profile
mt(3), mt_start_element(3), mt_end_element(3), mt_char_handler(3), mt_status_tree_sbuf(3), mt_status_tree_print(3), mt_status_entry_free(3), mt_status_free(3), mt_entry_sbuf(3), mt_param_parent_print(3), mt_param_entry_print(3), mt_protect_print(3), mt_param_list(3), mt_density_name(3), mt_density_bp(3), mt_density_num(3), mt_get_xml_str(3), mt_get_status(3)
Magnetic Tape library
pam_acct_mgmt(3), pam_authenticate(3), pam_chauthtok(3), pam_close_session(3), pam_end(3), pam_get_data(3), pam_get_item(3), pam_get_user(3), pam_getenv(3), pam_getenvlist(3), pam_open_session(3), pam_putenv(3), pam_set_data(3), pam_set_item(3), pam_setcred(3), pam_start(3), pam_strerror(3)
Pluggable Authentication Modules Library
pam_start(3)
initiate a PAM transaction
pmc_start(3), pmc_stop(3)
start and stop a PMC
rc(8)
command scripts for auto-reboot and daemon startup
rc.sendmail(8)
sendmail(8) startup script
reboot(8), halt(8), fastboot(8), fasthalt(8)
stopping and restarting the system
rman(9), rman_activate_resource(9), rman_adjust_resource(9), rman_deactivate_resource(9), rman_fini(9), rman_init(9), rman_init_from_resource(9), rman_is_region_manager(9), rman_manage_region(9), rman_first_free_region(9), rman_last_free_region(9), rman_release_resource(9), rman_reserve_resource(9), rman_reserve_resource_bound(9), rman_make_alignment_flags(9), rman_get_start(9), rman_get_end(9), rman_get_device(9), rman_get_size(9), rman_get_flags(9), rman_set_mapping(9), rman_get_mapping(9), rman_set_virtual(9), rman_get_virtual(9), rman_set_bustag(9), rman_get_bustag(9), rman_set_bushandle(9), rman_get_bushandle(9), rman_set_rid(9), rman_get_rid(9)
resource management functions
sbuf(9), sbuf_new(9), sbuf_new_auto(9), sbuf_new_for_sysctl(9), sbuf_clear(9), sbuf_get_flags(9), sbuf_set_flags(9), sbuf_clear_flags(9), sbuf_setpos(9), sbuf_bcat(9), sbuf_bcopyin(9), sbuf_bcpy(9), sbuf_cat(9), sbuf_copyin(9), sbuf_cpy(9), sbuf_nl_terminate(9), sbuf_printf(9), sbuf_vprintf(9), sbuf_putc(9), sbuf_set_drain(9), sbuf_trim(9), sbuf_error(9), sbuf_finish(9), sbuf_data(9), sbuf_len(9), sbuf_done(9), sbuf_delete(9), sbuf_start_section(9), sbuf_end_section(9), sbuf_hexdump(9), sbuf_printf_drain(9), sbuf_putbuf(9)
safe string composition
service(8)
control (start/stop/etc.) or list system services
snmp_client(3), snmp_client_init(3), snmp_client_set_host(3), snmp_client_set_port(3), snmp_send_cb_f(3), snmp_timeout_cb_f(3), snmp_timeout_start_f(3), snmp_timeout_stop_f(3), snmp_open(3), snmp_close(3), snmp_pdu_create(3), snmp_add_binding(3), snmp_pdu_check(3), snmp_pdu_send(3), snmp_oid_append(3), snmp_parse_server(3), snmp_receive(3), snmp_table_cb_f(3), snmp_table_fetch(3), snmp_table_fetch_async(3), snmp_dialog(3), snmp_discover_engine(3)
SNMP client library
stablerestart(5), nfs-stablerestart(5)
restart information for the NFSv4 server
start_color(3), has_colors(3), can_change_color(3), init_pair(3), init_color(3), init_extended_pair(3), init_extended_color(3), color_content(3), pair_content(3), extended_color_content(3), extended_pair_content(3), reset_color_pairs(3), COLOR_PAIR(3), PAIR_NUMBER(3)
curses color manipulation routines
usb_fifo_alloc_buffer(9), usb_fifo_attach(9), usb_fifo_detach(9), usb_fifo_free_buffer(9), usb_fifo_get_data(9), usb_fifo_get_data_buffer(9), usb_fifo_get_data_error(9), usb_fifo_get_data_linear(9), usb_fifo_put_bytes_max(9), usb_fifo_put_data(9), usb_fifo_put_data_buffer(9), usb_fifo_put_data_error(9), usb_fifo_put_data_linear(9), usb_fifo_reset(9), usb_fifo_softc(9), usb_fifo_wakeup(9), usbd_do_request(9), usbd_do_request_flags(9), usbd_errstr(9), usbd_lookup_id_by_info(9), usbd_lookup_id_by_uaa(9), usbd_transfer_clear_stall(9), usbd_transfer_drain(9), usbd_transfer_pending(9), usbd_transfer_poll(9), usbd_transfer_setup(9), usbd_transfer_start(9), usbd_transfer_stop(9), usbd_transfer_submit(9), usbd_transfer_unsetup(9), usbd_xfer_clr_flag(9), usbd_xfer_frame_data(9), usbd_xfer_frame_len(9), usbd_xfer_get_frame(9), usbd_xfer_get_priv(9), usbd_xfer_is_stalled(9), usbd_xfer_max_framelen(9), usbd_xfer_max_frames(9), usbd_xfer_max_len(9), usbd_xfer_set_flag(9), usbd_xfer_set_frame_data(9), usbd_xfer_set_frame_len(9), usbd_xfer_set_frame_offset(9), usbd_xfer_set_frames(9), usbd_xfer_set_interval(9), usbd_xfer_set_priv(9), usbd_xfer_set_stall(9), usbd_xfer_set_timeout(9), usbd_xfer_softc(9), usbd_xfer_state(9), usbd_xfer_status(9)
Universal Serial Bus driver programming interface
usbhid(3), hid_get_report_desc(3), hid_get_report_id(3), hid_use_report_desc(3), hid_dispose_report_desc(3), hid_start_parse(3), hid_end_parse(3), hid_get_item(3), hid_report_size(3), hid_locate(3), hid_usage_page(3), hid_usage_in_page(3), hid_init(3), hid_get_data(3), hid_set_data(3), hid_get_report(3), hid_set_report(3)
USB HID access routines
wcrtomb(3), c16rtomb(3), c32rtomb(3)
convert a wide-character code to a character (restartable)
wcsrtombs(3), wcsnrtombs(3)
convert a wide-character string to a character string (restartable)
ASYNC_get_wait_ctx(3), ASYNC_init_thread(3), ASYNC_cleanup_thread(3), ASYNC_start_job(3), ASYNC_pause_job(3), ASYNC_get_current_job(3), ASYNC_block_pause(3), ASYNC_unblock_pause(3), ASYNC_is_capable(3)
asynchronous job management functions
BN_CTX_start(3), BN_CTX_get(3), BN_CTX_end(3)
use temporary BIGNUM variables
3ddeskd(1)
starts the daemon for 3D-Desktop, a 3D desktop switcher
ASN1_put_object(3), ASN1_put_eoc(3), ASN1_object_size(3)
start and end the BER encoding of an arbitrary ASN.1 data element
ASYNC_get_wait_ctx(3), ASYNC_init_thread(3), ASYNC_cleanup_thread(3), ASYNC_start_job(3), ASYNC_pause_job(3), ASYNC_get_current_job(3), ASYNC_block_pause(3), ASYNC_unblock_pause(3), ASYNC_is_capable(3)
asynchronous job management functions
ASYNC_get_wait_ctx(3ossl), ASYNC_init_thread(3ossl), ASYNC_cleanup_thread(3ossl), ASYNC_start_job(3ossl), ASYNC_pause_job(3ossl), ASYNC_get_current_job(3ossl), ASYNC_block_pause(3ossl), ASYNC_unblock_pause(3ossl), ASYNC_is_capable(3ossl)
asynchronous job management functions
BEGIN(7)
start a transaction block
BN_CTX_start(3), BN_CTX_get(3), BN_CTX_end(3)
use temporary BIGNUM variables
BN_CTX_start(3ossl), BN_CTX_get(3ossl), BN_CTX_end(3ossl)
use temporary BIGNUM variables
BSctx_set_restart(3)
Set the number of vectors stored by GMRES
BSeasy_A(3)
Given A in a standard numerical format, construct the sparse A that we need for BlockSolve. This routine is particularly useful for matrices created in Fortran. The rows on a processor must be contiguous in the global numbering. If they are not, then other BlockSolve routines must be called to construct the matrix for BlockSolve. Arrays are indexed starting with 0. The values in a row must be sorted according to column number
CURLINFO_PRETRANSFER_TIME(3)
get the time until the file transfer start
CURLINFO_PRETRANSFER_TIME_T(3)
get the time until the file transfer start
CURLINFO_STARTTRANSFER_TIME(3)
get the time until the first byte is received
CURLINFO_STARTTRANSFER_TIME_T(3)
get the time until the first byte is received
CURLOPT_COOKIESESSION(3)
start a new cookie session
CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS(3)
head start for ipv6 for happy eyeballs
CURLOPT_RESOLVER_START_DATA(3)
pointer passed to the resolver start callback
CURLOPT_RESOLVER_START_FUNCTION(3)
callback called before a new name resolve is started
CURLOPT_SSL_FALSESTART(3)
TLS false start
DString.tcl86(3), Tcl_DStringInit(3), Tcl_DStringAppend(3), Tcl_DStringAppendElement(3), Tcl_DStringStartSublist(3), Tcl_DStringEndSublist(3), Tcl_DStringLength(3), Tcl_DStringValue(3), Tcl_DStringSetLength(3), Tcl_DStringTrunc(3), Tcl_DStringFree(3), Tcl_DStringResult(3), Tcl_DStringGetResult(3)
manipulate dynamic strings
DString.tcl87(3), Tcl_DStringInit(3), Tcl_DStringAppend(3), Tcl_DStringAppendElement(3), Tcl_DStringStartSublist(3), Tcl_DStringEndSublist(3), Tcl_DStringLength(3), Tcl_DStringValue(3), Tcl_DStringSetLength(3), Tcl_DStringTrunc(3), Tcl_DStringFree(3), Tcl_DStringResult(3), Tcl_DStringGetResult(3)
manipulate dynamic strings
FcCharSetFirstPage(3)
Start enumerating charset contents
FcPatternIterStart(3)
Initialize the iterator with the first iterator in the pattern
MPI_Grequest_start(3)
Create and return a user-defined request
MPI_Ibsend(3)
Starts a nonblocking buffered send
MPI_Irsend(3)
Starts a nonblocking ready send
MPI_Issend(3)
Starts a nonblocking synchronous send
MPI_Start(3)
Initiates a communication with a persistent request handle
MPI_Startall(3)
Starts a collection of persistent requests
MPI_T_pvar_start(3)
Start a performance variable
MPI_Win_complete(3)
Completes an RMA operations begun after an MPI_Win_start
MPI_Win_post(3)
Start an RMA exposure epoch
MPI_Win_start(3)
Start an RMA access epoch for MPI
Munin::Common::TLS(3), Munin::Node::TLS(3)
Abstract base class implementing the STARTTLS protocol
Munin::Common::TLSClient(3), Munin::Node::TLSClient(3)
Implements the client side of the STARTTLS protocol
Munin::Common::TLSServer(3), Munin::Node::TLSServer(3)
Implements the server side of the STARTTLS protocol
PS_begin_font(3)
Starts a new Type3 font
PS_begin_glyph(3)
Starts a new glyph in a Type3 font
PS_begin_page(3)
Start a new page
PS_begin_pattern(3)
Starts a new pattern
PS_begin_template(3)
Starts a new template
SDL_CondBroadcast(3)
Restart all threads waiting on a condition variable
SDL_CondSignal(3)
Restart a thread wait on a condition variable
SPI_start_transaction(3)
obsolete function
START_TRANSACTION(7)
start a transaction block
Tcl_DStringAppend.tcl85(3), Tcl_DStringInit(3), Tcl_DStringAppend(3), Tcl_DStringAppendElement(3), Tcl_DStringStartSublist(3), Tcl_DStringEndSublist(3), Tcl_DStringLength(3), Tcl_DStringValue(3), Tcl_DStringSetLength(3), Tcl_DStringTrunc(3), Tcl_DStringFree(3), Tcl_DStringResult(3), Tcl_DStringGetResult(3)
manipulate dynamic strings
Tcl_GetStartupScript.tcl86(3), Tcl_Main(3), Tcl_MainEx(3), Tcl_MainExW(3), Tcl_SetStartupScript(3), Tcl_GetStartupScript(3), Tcl_SetMainLoop(3)
main program, startup script, and event loop definition for Tcl-based applications
Tcl_GetStartupScript.tcl87(3), Tcl_Main(3), Tcl_MainEx(3), Tcl_MainExW(3), Tcl_SetStartupScript(3), Tcl_GetStartupScript(3), Tcl_SetMainLoop(3)
main program, startup script, and event loop definition for Tcl-based applications
XmClipboardStartCopy(3)
A clipboard function that sets up a storage and data structure "XmClipboardStartCopy" "clipboard functions" "XmClipboardStartCopy"
XmClipboardStartRetrieve(3)
A clipboard function that prepares to retrieve data from the clipboard "XmClipboardStartRetrieve" "clipboard functions" "XmClipboardStartRetrieve"
XmDragStart(3)
A Drag and Drop function that initiates a drag and drop transaction "XmDragStart" "Drag and Drop functions" "XmDragStart"
XmDropSiteStartUpdate(3)
A Drag and Drop function that facilitates processing updates to multiple drop sites "XmDropSiteStartUpdate" "Drag and Drop functions" "XmDropSiteStartUpdate"
XmDropTransferStart(3)
A Drag and Drop function that initiates a drop transfer "XmDropTransferStart" "Drag and Drop functions" "XmDropTransferStart"
XmListDeleteItemsPos(3)
A List function that deletes items from the list starting at the given position "XmListDeleteItemsPos" "List functions" "XmListDeleteItemsPos"
XmTransferStartRequest(3)
A toolkit function that begins a MULTIPLE transfer "XmTransferStartRequest" "toolkit functions" "XmTransferStartRequest"
airdaemon(1)
Run a program as a daemon process, restarting it if it dies
al_findnext(3)
Finds the next file in a search started by al_findfirst(). Allegro game programming library
al_get_timer_started(3)
Allegro 5 API
al_start_audio_recorder(3)
Allegro 5 API
al_start_thread(3)
Allegro 5 API
al_start_timer(3)
Allegro 5 API
al_start_video(3)
Allegro 5 API
al_start_video_with_voice(3)
Allegro 5 API
asn1_der_decoding_startEnd(3)
API function
auto_execok.tcl85(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_mkindex_old(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
auto_execok.tcl86(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
auto_execok.tcl87(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
autossh(1)
monitor and restart ssh sessions
ber_alloc_t(3), ber_flush(3), ber_flush2(3), ber_printf(3), ber_put_int(3), ber_put_enum(3), ber_put_ostring(3), ber_put_string(3), ber_put_null(3), ber_put_boolean(3), ber_put_bitstring(3), ber_start_seq(3), ber_start_set(3), ber_put_seq(3), ber_put_set(3)
OpenLDAP LBER simplified Basic Encoding Rules library routines for encoding
byobu-enable(1), byobu-disable(1)
wrapper script for enabling/disabling automatic startup of byobu after login into text console
ceph-run(8)
restart daemon on core dump
cinnamon-launcher(1)
Start or restart a cinnamon session
cinnamon-session(1)
Start the GNOME desktop environment
ck-launch-session(1)
Utility to start a ConsoleKit session from a shell script
cnid_metad(8)
start cnid_dbd daemons on request
combine_lang_model(1)
generate starter traineddata
cpl_complete_word(3), cfc_file_start(3), cfc_literal_escapes(3), cfc_set_check_fn(3), cpl_add_completion(3), cpl_file_completions(3), cpl_last_error(3), cpl_list_completions(3), cpl_recall_matches(3), cpl_record_error(3), del_CplFileConf(3), del_WordCompletion(3), new_CplFileConf(3), new_WordCompletion(3)
lookup possible completions for a word
cupsdisable(8), cupsenable(8)
stop/start printers and classes
curl_easy_init(3)
Start a libcurl easy session
dbus-launch(1)
Utility to start a message bus from a shell script
dbus-run-session(1)
start a process as a new D-Bus session
default.pa(5)
PulseAudio Sound Server Startup Script
del_curterm(3x), mvcur(3x), putp(3x), restartterm(3x), set_curterm(3x), setupterm(3x), tigetflag(3x), tigetnum(3x), tigetstr(3x), tiparm(3x), tparm(3x), tputs(3x), vid_attr(3x), vid_puts(3x), vidattr(3x), vidputs(3x)
curses interfaces to terminfo database
dqcache-start(1)
wrapper for dqcache daemon
dx(l)
start the Data Explorer visualization system. Optionally directly start the User Interface (dxui), the executive (dxexec), the Data Prompter, the Module Builder or the Tutorial
eclat-start(1), eclat-start-instances(1)
start EC2 instances
encfssh(1)
mount encrypted virtual filesystem and start shell Write in progress
explain_setgrent_or_die(3)
rewind group database and report errors require_index { "rewind to the start of the group database and report errors" }
fail2ban-server(1)
start the server
fame_start_frame(3)
starts encoding of a frame
fcgistarter(8)
Start a FastCGI program
firestring_estr_estarts(3)
check case-insensitively if an estring starts with an estring
firestring_estr_starts(3)
check case-insensitively if an estring starts with a string
firestring_trim(3)
trim excess whitespace from the start and end of a string
footclient(1)
start new terminals in a foot server
fvwm-themes-start(1)
FVWM Themes starter
fxterm(1)
start xterm with VGA color palette
genisoimagerc(5)
startup configuration file for genisoimage
get_font_range_begin(3)
Returns the start of a character range in a font. Allegro game programming library
git-secret-add(1)
starts to track added files
gl_setdisplaystart(3)
set the start of the screen are displayed
gnome-session(1)
Start the GNOME desktop environment
gsasl_client_start(3)
API function
gsasl_server_start(3)
API function
icedtea-web(1)
provides a Free Software web browser plugin running applets written in the Java programming language and an implementation of Java Web Start, originally based on the NetX project. NetX allows Java applets and applications to be downloaded over the network, cached, and (by default) run in a secure sandbox environment. Subsequent runs of the applet download the latest version automatically. Update and security settings, among others, can be set using the itw-settings command. icedtea-web also includes a plugin to enable Java applets (http://www.java.com/en/download/testjava.jsp) within web browsers. Names and email addresses of contributors to this project can be found in the file AUTHORS in the IcedTea-Web root directory. The full GPLv2 license of this project can be found in the file COPYING in the IcedTea-Web root directory. News about releases of this project can be found in the file NEWS in the IcedTea-Web root directory
icmstart(1)
A startup script for icmbuild program maintenance
icmstart.rc(7)
The icmstart(1) resource file
immortal(8)
starts and monitor a service
immortalctl(8)
control services started by immortal(8)
immortaldir(8)
start services located in a specified directory
influxd-run(1)
Configure and start an InfluxDB server
ipc_listen(3)
starts listening for incoming IPC connections
ipc_listen_mem(3)
starts listening for incoming IPC connections
itweb-javaws(1), javaws(1)
a Java Web Start client
jabberd(8)
jabberd startup script
jk_chrootlaunch(8)
a launcher that can start a daemon in a jail, with a specified uid and gid
jkill(8)
stop or restart a jail
jmakewhatis.local(8), jcatman.local(8)
start jmakewhatis or jcatman.local for local file systems
jstart(8)
start a jail
k5start(1)
Obtain and optionally keep active a Kerberos ticket
knet_handle_setfwd(3)
Start packet forwarding
ldap_start_tls(3), ldap_start_tls_s(3), ldap_tls_inplace(3), ldap_install_tls(3)
LDAP TLS initialization routines
ldns_axfr_start(3), ldns_axfr_next(3), ldns_axfr_abort(3), ldns_axfr_complete(3), ldns_axfr_last_pkt(3)
functions for full zone transfer
libowfat_array_start(3), array_start(3)
get pointer to first element in array
libowfat_case_starts(3), case_starts(3)
compare prefixes of strings case-insensitively
libowfat_str_start(3), str_start(3)
compare prefixes of strings
libowfat_stralloc_starts(3), stralloc_starts(3)
check if string is prefix of stralloc
libssh2_channel_exec(3)
convenience macro for libssh2_channel_process_startup(3) calls
libssh2_channel_process_startup(3)
request a shell on a channel
libssh2_channel_shell(3)
convenience macro for libssh2_channel_process_startup(3) calls
libssh2_channel_subsystem(3)
convenience macro for libssh2_channel_process_startup(3) calls
libssh2_session_startup(3)
begin transport layer
lightning-fundchannel_start(7)
Command for initiating channel establishment for a lightning channel
lp5250d(1)
start an AS/400 printer session
lxsession-edit(1)
a simple session editor GUI for LXDE which follows autostart specs from FreeDesktop.Org
lxsession-xdg-autostart(1)
lxsession's autostart runner
mate-session(1)
Start the MATE Desktop Environment
mate-session-properties(1)
Configure applications to start on login
mate-wm(1)
Start the window manager configured by the user
mfscgiserv(8)
start HTTP/CGI server for Moose File System monitoring
mfschunkserver(8)
start, restart or stop Moose File System chunkserver process
mfsmaster(8)
start, restart or stop Moose File System master process
mfsmetalogger(8)
start, restart or stop Moose File System metalogger process
midi_loop_start(3), midi_loop_end(3)
Loop start and end points, set by play_looped_midi(). Allegro game programming library
modbus_mapping_new_start_address(3)
allocate four arrays of bits and registers accessible from their starting addresses
mtext_property_start(3m17n)
Return the start position of a text property
ncoffsets(1)
print the starting/ending file offsets for netCDF variables
nn_device(3)
start a device
oggz-chop(1)
Extract the part of an Ogg file between given start and/or end times
open(1)
start a program on a new virtual terminal (VT)
ovs-kmod-ctl(8)
OVS startup helper script for loading kernel modules
panda_setlinestart(3)
sets the starting point of a curve
pbs_mom(8)
start a pbs batch execution mini-server
pbs_server(8)
start a pbs batch server
pca_lookup_file(3), del_PathCache(3), del_PcaPathConf(3), new_PathCache(3), new_PcaPathConf(3), pca_last_error(3), pca_path_completions(3), pca_scan_path(3), pca_set_check_fn(3), ppc_file_start(3), ppc_literal_escapes(3)
lookup a file in a list of directories
pcre2_get_startchar(3), PCRE2(3)
Perl-compatible regular expressions (revised API)
pcre2api(3), PCRE2(3)
Perl-compatible regular expressions (revised API) #include <pcre2.h> PCRE2 is a new API for PCRE, starting at release 10.0. This document contains a description of all its native functions. See the pcre2 document for an overview of all the PCRE2 documentation
perpboot(8)
startup utility for perpd (8) and an associated logger
pg_ctl(1)
initialize, start, stop, or control a PostgreSQL server
play_audio_stream(3)
Creates a new audio stream and starts playing it. Allegro game programming library
play_looped_midi(3)
Starts playing a MIDI file with a user-defined loop position. Allegro game programming library
play_midi(3)
Starts playing the specified MIDI file. Allegro game programming library
pppoe-start(8)
Shell script to bring up a PPPoE link
pppoe.conf(5)
Configuration file used by pppoe-start(8), pppoe-stop(8), pppoe-status(8) and pppoe-connect(8)
pskc_get_device_startdate(3)
API function
pskc_get_key_policy_startdate(3)
API function
pskc_set_device_startdate(3)
API function
pskc_set_key_policy_startdate(3)
API function
pvm_reg_hoster(3)
Register task as PVM slave starter
pvm_reg_tasker(3)
Register task as PVM task starter
pvm_siblings(3)
return the number and associated task ids of processes that were started together in a single spawn call
pvm_spawn(3)
Starts new PVM processes
pvm_start_pvmd(3)
Starts new PVM daemon
qstart(8)
start pbs batch job processing at a destination
quorum_trackstart(3)
Enable callbacks notification
rabbitmq-server(8)
starts a RabbitMQ node
rc.news(8)
Start or stop INN daemons
reset_target(3), reset_target (3)
Request that a target resets to a known starting state
rodent-anim(1), Rodent-anim(1)
Rodent startup animation display
runit-faster(7)
Getting started
runsv(8)
starts and monitors a service and optionally an appendant log service
runsvdir(8)
starts and monitors a collection of runsv(8) processes
sam_start(3)
Start health checking
sasl_client_start(3)
Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1
sasl_server_start(3)
Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1
sc_ShmMessageGrp(3), sc::ShmMessageGrp(3)
The ShmMessageGrp class is an implementation of MessageGrp that allows multiple process to be started that communicate with shared memory
scsi_start(8)
start one or more SCSI disks
seatd-launch(1)
Start a process with its own seatd instance
selectwm(1)
select a window manager at X startup
sftpgo-serve(1)
Start the SFTPGo service
sftpgo-startsubsys(1)
Use sftpgo as SFTP file transfer subsystem
sg_start(8)
send SCSI START STOP UNIT command: start, stop, load or eject medium
slurm_step_launch_params_t_init(3), slurm_step_launch(3), slurm_step_launch_fwd_signal(3), slurm_step_launch_wait_start(3), slurm_step_launch_wait_finish(3), slurm_step_launch_abort(3)
Slurm job step launch functions
sowon(6)
Starting soon timer
sqlr-start(8)
manual page for sqlr-start 1.7.0
start-lumina-desktop(8)
Basic binary that starts a new Lumina session for the current user
start-pulseaudio-x11(1)
PulseAudio Sound Server X11 Startup Script
start-stop-daemon(8)
start and stop system daemon programs
start_color(3x), has_colors(3x), can_change_color(3x), init_pair(3x), init_color(3x), init_extended_pair(3x), init_extended_color(3x), color_content(3x), pair_content(3x), extended_color_content(3x), extended_pair_content(3x), reset_color_pairs(3x), COLOR_PAIR(3x), PAIR_NUMBER(3x)
curses color manipulation routines
start_sound_input(3)
Starts recording in the specified format. Allegro game programming library
startfluxbox(1)
start a fluxbox session
startlazarus(1)
starts lazarus program. fpdoc
startlxde(1)
X session script to prepare environment and run lxsession
startx(1)
initialize an X session
supervise(8)
starts and monitors a service
svscan(8)
starts and monitors a collection of services
svscanboot(8)
starts svscan (8) in the /service directory, with output and error messages logged through readproctitle (8)
svup(8)
checks whether supervise (8) has started a service
tcp_listen(3)
starts listening for incoming TCP connections
tcp_listen_mem(3)
starts listening for incoming TCP connections
termkey_start(3), termkey_stop(3), termkey_is_started(3)
enable or disable terminal operations
timew-modify(1)
change start or end date of an interval
timew-move(1)
change interval start-time
timew-start(1)
start time tracking
timing(3), benchmp(3), benchmp_getstate(3), benchmp_interval(3), start(3), stop(3), get_n(3), set_n(3), gettime(3), settime(3), get_enough(3), t_overhead(3), l_overhead(3)
the lmbench timing subsystem
tpm2_policycountertimer(1), tpm2_policycountertimer(1)(1)
Enables policy authorization by evaluating the comparison operation on the TPM parameters time, clock, reset count, restart count and TPM clock safe flag
tpm2_policyrestart(1), tpm2_policyrestart(1)(1)
Restart an existing session with the TPM
tpm2_startauthsession(1), tpm2_startauthsession(1)(1)
Start a session with the TPM
tpm2_startup(1), tpm2_startup(1)(1)
Send a startup command to the TPM
tracker-daemon(1)
Start, stop, restart and list daemons responsible for indexing content
trafd(8), -(8)
-tag -width 9n -compact trafd ip traffic collector daemon. trafdump Script to dump current traffic to disk. trafsave Script to save current traffic to disk. trafstart Startup script for trafd. trafstop Shutgown script for trafd. trafd.sh Start/stop script for trafd, placed to the local startup directory ( */rc.d)
ttservctl(8), ttserctl(8)
the startup script of the server of Tokyo Tyrant
tuptime(1)
Report historical and statistical real time of the system, keeping it between restarts. Total uptime
upscli_list_start(3)
begin multi-item retrieval from a UPS
uscheduleruntimelimit(1)
start child and kill it after some time
uterm(1)
start script for a Unicode capable terminal window
vga_disabledriverreport(3)
makes svgalib not emit any startup messages
vga_safety_fork(3)
start a parallel process to restore the console at a crash
vga_setdisplaystart(3)
set the display start address
voice_ramp_volume(3)
Starts a volume ramp for a voice. Allegro game programming library
voice_start(3)
Activates a voice. Allegro game programming library
voice_sweep_frequency(3)
Starts a frequency sweep for a voice. Allegro game programming library
voice_sweep_pan(3)
Starts a pan sweep for a voice. Allegro game programming library
votequorum_trackstart(3)
Enable callbacks notification
wineboot(1)
perform Wine initialization, startup, and shutdown tasks
xcmd(1)
front-end for starting programs under X11
xfce4-session(1)
Starts up the Xfce Desktop Environment
xon(1)
start an X program on a remote machine
xrlogin(1)
start an xterm that uses rlogin or telnet to connect to a remote host
xrsh(1)
start an X program on a remote machine
xtoolwait(1)
start X client and wait for it to map a window
zmq_device(3)
start built-in 0MQ device
zmq_proxy(3)
start built-in 0MQ proxy
Apache::ConfigParser::Directive(3), Apache::ConfigParser::Directive(3)
An Apache directive or start context
App::Cmd::Tutorial(3)
getting started with App::Cmd
App::Yath::Command::start(3)
Start the persistent test runner
Basics-Overview(1), bk Basics-Overview(1)
basics to help get a new user started
Bigtop::Docs::QuickStart(3), Header "Name" Bigtop::Docs::QuickStart(3)
The fastest ways to Gantry apps with Bigtop
Bigtop::ScriptHelp::Style::Kickstart(3)
handles kickstart syntax for scripts
Bio::LocatableSeq(3)
A Bio::PrimarySeq object with start/end points on it that can be projected into a MSA or have coordinates relative to another seq
Bio::Location::Fuzzy(3)
Implementation of a Location on a Sequence which has unclear start and/or end locations
Bio::Location::FuzzyLocationI(3)
Abstract interface of a Location on a Sequence which has unclear start/end location
Bio::Location::Split(3)
Implementation of a Location on a Sequence which has multiple locations (start/end points)
Bio::Location::SplitLocationI(3)
Abstract interface of a Location on a Sequence which has multiple locations (start/end points)
CPAN::HandleConfig(3)
internal configuration handling for CPAN.pm n .SS """CLASS->safe_quote ITEM""" .SS "CLASS->safe_quote ITEM" Subsection "CLASS->safe_quote ITEM" Quotes an item to become safe against spaces in shell interpolation. An item is enclosed in double quotes if: - the item contains spaces in the middle - the item does not start with a quote This happens to avoid shell interpolation problems when whitespace is present in directory names. This method uses commands_quote to determine the correct quote. If commands_quote is a space, no quoting will take place. if it starts and ends with the same quote character: leave it as it is if it contains no whitespace: leave it as it is if it contains whitespace, then if it contains quotes: better leave it as it is else: quote it with the correct quote type for the box we're on
Catalyst::Restarter(3)
Uses File::ChangeNotify to check for changed files and restart the server
Catalyst::Restarter::Forking(3)
Forks and restarts the child process
Catalyst::Restarter::Win32(3)
Uses Proc::Background to manage process restarts
DBIx::Class::Manual::QuickStart(3)
up and running with DBIC in 10 minutes
DBIx::Class::StartupCheck(3)
Run environment checks on startup
DBIx::QuickDB(3)
Quickly start a db server
DR::Tarantool::StartTest(3)
finds and starts Tarantool on free port
Daemon::Generic(3), Daemon::Generic(3)
framework to provide start/stop/reload for a daemon
Dancer2::Cookbook(3)
Example-driven quick-start to the Dancer2 web framework
Dancer2::Core::Runner(3)
Top-layer class to start a dancer app
Dancer2::Plugin::FormValidator(3)
neat and easy to start form validation plugin for Dancer2
Dancer::Cookbook(3)
a quick-start guide to the Dancer web framework
DateTime::Fiscal::Year(3)
Calculate the day or week of the Fiscal Year with an arbitrary start date
Devel::REPL::Profile(3)
Code to execute when re.pl starts
DtDndDragStart(3)
DtDndVaDragStart initiate a drag
Email::Sender::Manual::QuickStart(3)
how to start using Email::Sender right now
Exporter::Tiny::Manual::QuickStart(3)
the quickest way to get up and running with Exporter::Tiny
Font::TTF::AATutils(3)
Utility functions for AAT tables n .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" Subsection "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" n .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" Subsection "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" $packEntry is a subroutine for packing an entry into binary form, called as $dat = $packEntry($entry, $entryTable, $numEntries) where the entry is a comma-separated list of nextStateOffset, flags, actions n .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" Subsection "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" n .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" Subsection "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" n .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" Subsection "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)"
Font::TTF::Gloc(3)
Offsets into Glat table for the start of the attributes for each glyph
Form::Sensible::Overview(3)
Getting started with Form::Sensible
Gantry::Docs::QuickStart(3), Header "Name" Gantry::Docs::QuickStart(3)
Getting your first Gantry app up and running
HTML::Seamstress::Quickstart(3)
A gentle introduction to HTML::Seamstress
HTML::TokeParser::Simple::Token::Tag::Start(3)
Token.pm "start tag" class
IO::Async::Process(3), "IO::Async::Process"(3)
start and manage a child process
Jifty::TestServer(3)
Starting and stopping jifty server for tests
MPI_Comm_idup(3), MPI_Comm_idup (3)
Start the nonblocking duplication of an existing communicator with all its cached information
MPI_File_iread(3)
Reads a file starting at the location specified by the individual file pointer (nonblocking, noncollective)
MPI_File_iread_all(3)
Reads a file starting at the location specified by the individual file pointer (nonblocking, collective)
MPI_File_iwrite(3)
Writes a file starting at the location specified by the individual file pointer (nonblocking, noncollective)
MPI_File_iwrite_all(3)
Writes a file starting at the location specified by the individual file pointer (nonblocking, collective)
MPI_File_read(3)
Reads a file starting at the location specified by the individual file pointer (blocking, noncollective)
MPI_File_read_all(3)
Reads a file starting at the locations specified by individual file pointers (blocking, collective)
MPI_File_read_all_begin(3)
Reads a file starting at the locations specified by individual file pointers; beginning part of a split collective routine (nonblocking)
MPI_File_read_all_end(3)
Reads a file starting at the locations specified by individual file pointers; ending part of a split collective routine (blocking)
MPI_File_write(3)
Writes a file starting at the location specified by the individual file pointer (blocking, noncollective)
MPI_File_write_all(3)
Writes a file starting at the locations specified by individual file pointers (blocking, collective)
MPI_File_write_all_begin(3)
Writes a file starting at the locations specified by individual file pointers; beginning part of a split collective routine (nonblocking)
MPI_File_write_all_end(3)
Writes a file starting at the locations specified by individual file pointers; ending part of a split collective routine (blocking)
MPI_Grequest_start(3), MPI_Grequest_start (3)
Starts a generalized request and returns a handle to it in request
MPI_Ibsend(3)
Starts a nonblocking buffered send
MPI_Irecv(3)
Starts a standard-mode, nonblocking receive
MPI_Irsend(3)
Starts a ready-mode nonblocking send
MPI_Isend(3)
Starts a standard-mode, nonblocking send
MPI_Issend(3)
Starts a nonblocking synchronous send
MPI_Start(3)
Initiates a communication using a persistent request handle
MPI_Startall(3)
Starts a collection of requests
MPI_T_pvar_start(3), MPI_T_pvar_stop(3)
Start/stop a performance variable
MPI_Win_complete(3)
Completes an RMA access epoch on win started by a call to MPI_Win_start
MPI_Win_lock(3)
Starts an RMA access epoch locking access to a particular rank
MPI_Win_lock_all(3)
Starts an RMA access epoch locking access to all processes in the window
MPI_Win_post(3)
Starts an RMA exposure epoch for the local window associated with win
MPI_Win_start(3)
Starts an RMA access epoch for win
MPI_Win_unlock(3)
Completes an RMA access epoch started by a call to MPI_Win_lock
MPI_Win_unlock_all(3)
Completes an RMA access epoch started by a call to MPI_Win_lock_all
MPI_Win_wait(3)
Completes an RMA exposure epoch started by a call to MPI_Win_post on win
Mason::Manual::Intro(3)
Getting started with Mason
ModPerl::RegistryLoader(3)
Compile ModPerl::RegistryCooker scripts at server startup
Module::Setup(3)
a simple module maker "yet another Module::Start(?:er)?"
Module::Starter(3)
a simple starter kit for any module
Module::Starter::App(3)
the code behind the command line program
Module::Starter::BuilderSet(3)
determine builder metadata
Module::Starter::PBP(3)
Create a module as recommended in "Perl Best Practices"
Module::Starter::Plugin(3)
-- how Module::Starter plugins work
Module::Starter::Plugin::DirStore(3)
-- module template files in a directory
Module::Starter::Plugin::InlineStore(3)
-- inline module template files
Module::Starter::Plugin::ModuleStore(3)
-- store inline templates in modules
Module::Starter::Plugin::TT2(3)
TT2 templates for Module::Starter::Template
Module::Starter::Plugin::Template(3)
module starter with templates
Module::Starter::Simple(3)
a simple, comprehensive Module::Starter plugin
Mojolicious::Guides::Tutorial(3)
Get started with Mojolicious
MongoDB::Tutorial(3)
Getting started with MongoDB
Moose::Cookbook::Roles::Restartable_AdvancedComposition(3)
Advanced Role Composition - method exclusion and aliasing
MooseX::App::Tutorial(3)
getting started with MooseX::App
Net::SMTPS(3)
SSL/STARTTLS support for Net::SMTP
Net::SSL::Handshake::StartTLS::SMTP(3)
SSL Handshake via SMTP+StartTLS
Net::STOMP::Client::Tutorial(3)
Getting started with STOMP and Net::STOMP::Client
Net::Server::Mail::ESMTP::STARTTLS(3)
A module to support the STARTTLS command in Net::Server::Mail::ESMTP
Net::TacacsPlus::Packet::AuthenStartBody(3)
Tacacs+ authentication packet body
PDL::QuickStart(1)
Quick introduction to PDL features
POEx::Role::SessionInstantiation::Meta::Session::Events(3)
Provides default events such as _start, _stop, etc
Paws::AccessAnalyzer::StartPolicyGeneration(3)
Arguments for method StartPolicyGeneration on Paws::AccessAnalyzer
Paws::AccessAnalyzer::StartResourceScan(3)
Arguments for method StartResourceScan on Paws::AccessAnalyzer
Paws::AlexaForBusiness::StartDeviceSync(3)
Arguments for method StartDeviceSync on Paws::AlexaForBusiness
Paws::AlexaForBusiness::StartSmartHomeApplianceDiscovery(3)
Arguments for method StartSmartHomeApplianceDiscovery on Paws::AlexaForBusiness
Paws::Amplify::ListArtifacts(3)
Arguments for method ListArtifacts on Paws::Amplify
Paws::Amplify::StartDeployment(3)
Arguments for method StartDeployment on Paws::Amplify
Paws::Amplify::StartJob(3)
Arguments for method StartJob on Paws::Amplify
Paws::AppConfig::StartDeployment(3)
Arguments for method StartDeployment on Paws::AppConfig
Paws::AppRunner::StartDeployment(3)
Arguments for method StartDeployment on Paws::AppRunner
Paws::AppStream::StartFleet(3)
Arguments for method StartFleet on Paws::AppStream
Paws::AppStream::StartImageBuilder(3)
Arguments for method StartImageBuilder on Paws::AppStream
Paws::AppSync::StartSchemaCreation(3)
Arguments for method StartSchemaCreation on Paws::AppSync
Paws::Appflow::StartFlow(3)
Arguments for method StartFlow on Paws::Appflow
Paws::ApplicationMigration::StartCutover(3)
Arguments for method StartCutover on Paws::ApplicationMigration
Paws::ApplicationMigration::StartTest(3)
Arguments for method StartTest on Paws::ApplicationMigration
Paws::Athena::StartQueryExecution(3)
Arguments for method StartQueryExecution on Paws::Athena
Paws::AutoScaling::StartInstanceRefresh(3)
Arguments for method StartInstanceRefresh on Paws::AutoScaling
Paws::Backup::StartBackupJob(3)
Arguments for method StartBackupJob on Paws::Backup
Paws::Backup::StartCopyJob(3)
Arguments for method StartCopyJob on Paws::Backup
Paws::Backup::StartRestoreJob(3)
Arguments for method StartRestoreJob on Paws::Backup
Paws::CloudTrail::StartLogging(3)
Arguments for method StartLogging on Paws::CloudTrail
Paws::CloudWatch::StartMetricStreams(3)
Arguments for method StartMetricStreams on Paws::CloudWatch
Paws::CloudWatchEvents::StartReplay(3)
Arguments for method StartReplay on Paws::CloudWatchEvents
Paws::CloudWatchLogs::StartQuery(3)
Arguments for method StartQuery on Paws::CloudWatchLogs
Paws::CodeBuild::StartBuild(3)
Arguments for method StartBuild on Paws::CodeBuild
Paws::CodeBuild::StartBuildBatch(3)
Arguments for method StartBuildBatch on Paws::CodeBuild
Paws::CodePipeline::StartPipelineExecution(3)
Arguments for method StartPipelineExecution on Paws::CodePipeline
Paws::CognitoIdp::StartUserImportJob(3)
Arguments for method StartUserImportJob on Paws::CognitoIdp
Paws::Comprehend::StartDocumentClassificationJob(3)
Arguments for method StartDocumentClassificationJob on Paws::Comprehend
Paws::Comprehend::StartDominantLanguageDetectionJob(3)
Arguments for method StartDominantLanguageDetectionJob on Paws::Comprehend
Paws::Comprehend::StartEntitiesDetectionJob(3)
Arguments for method StartEntitiesDetectionJob on Paws::Comprehend
Paws::Comprehend::StartEventsDetectionJob(3)
Arguments for method StartEventsDetectionJob on Paws::Comprehend
Paws::Comprehend::StartKeyPhrasesDetectionJob(3)
Arguments for method StartKeyPhrasesDetectionJob on Paws::Comprehend
Paws::Comprehend::StartPiiEntitiesDetectionJob(3)
Arguments for method StartPiiEntitiesDetectionJob on Paws::Comprehend
Paws::Comprehend::StartSentimentDetectionJob(3)
Arguments for method StartSentimentDetectionJob on Paws::Comprehend
Paws::Comprehend::StartTopicsDetectionJob(3)
Arguments for method StartTopicsDetectionJob on Paws::Comprehend
Paws::ComprehendMedical::StartEntitiesDetectionV2Job(3)
Arguments for method StartEntitiesDetectionV2Job on Paws::ComprehendMedical
Paws::ComprehendMedical::StartICD10CMInferenceJob(3)
Arguments for method StartICD10CMInferenceJob on Paws::ComprehendMedical
Paws::ComprehendMedical::StartPHIDetectionJob(3)
Arguments for method StartPHIDetectionJob on Paws::ComprehendMedical
Paws::ComprehendMedical::StartRxNormInferenceJob(3)
Arguments for method StartRxNormInferenceJob on Paws::ComprehendMedical
Paws::Config::StartConfigRulesEvaluation(3)
Arguments for method StartConfigRulesEvaluation on Paws::Config
Paws::Config::StartConfigurationRecorder(3)
Arguments for method StartConfigurationRecorder on Paws::Config
Paws::Config::StartRemediationExecution(3)
Arguments for method StartRemediationExecution on Paws::Config
Paws::Connect::StartChatContact(3)
Arguments for method StartChatContact on Paws::Connect
Paws::Connect::StartContactRecording(3)
Arguments for method StartContactRecording on Paws::Connect
Paws::Connect::StartOutboundVoiceContact(3)
Arguments for method StartOutboundVoiceContact on Paws::Connect
Paws::Connect::StartTaskContact(3)
Arguments for method StartTaskContact on Paws::Connect
Paws::ConnectParticipant::StartAttachmentUpload(3)
Arguments for method StartAttachmentUpload on Paws::ConnectParticipant
Paws::DMS::StartReplicationTask(3)
Arguments for method StartReplicationTask on Paws::DMS
Paws::DMS::StartReplicationTaskAssessment(3)
Arguments for method StartReplicationTaskAssessment on Paws::DMS
Paws::DMS::StartReplicationTaskAssessmentRun(3)
Arguments for method StartReplicationTaskAssessmentRun on Paws::DMS
Paws::DS::StartSchemaExtension(3)
Arguments for method StartSchemaExtension on Paws::DS
Paws::DataExchange::StartJob(3)
Arguments for method StartJob on Paws::DataExchange
Paws::Datasync::StartTaskExecution(3)
Arguments for method StartTaskExecution on Paws::Datasync
Paws::Detective::StartMonitoringMember(3)
Arguments for method StartMonitoringMember on Paws::Detective
Paws::DevOpsGuru::StartCostEstimation(3)
Arguments for method StartCostEstimation on Paws::DevOpsGuru
Paws::DeviceFarm::ListArtifacts(3)
Arguments for method ListArtifacts on Paws::DeviceFarm
Paws::DirectConnect::StartBgpFailoverTest(3)
Arguments for method StartBgpFailoverTest on Paws::DirectConnect
Paws::Discovery::StartContinuousExport(3)
Arguments for method StartContinuousExport on Paws::Discovery
Paws::Discovery::StartDataCollectionByAgentIds(3)
Arguments for method StartDataCollectionByAgentIds on Paws::Discovery
Paws::Discovery::StartExportTask(3)
Arguments for method StartExportTask on Paws::Discovery
Paws::Discovery::StartImportTask(3)
Arguments for method StartImportTask on Paws::Discovery
Paws::DocDB::StartDBCluster(3)
Arguments for method StartDBCluster on Paws::DocDB
Paws::EBS::StartSnapshot(3)
Arguments for method StartSnapshot on Paws::EBS
Paws::EC2::ModifyInstanceEventStartTime(3)
Arguments for method ModifyInstanceEventStartTime on Paws::EC2
Paws::EC2::StartInstances(3)
Arguments for method StartInstances on Paws::EC2
Paws::EC2::StartNetworkInsightsAnalysis(3)
Arguments for method StartNetworkInsightsAnalysis on Paws::EC2
Paws::EC2::StartVpcEndpointServicePrivateDnsVerification(3)
Arguments for method StartVpcEndpointServicePrivateDnsVerification on Paws::EC2
Paws::ECR::StartImageScan(3)
Arguments for method StartImageScan on Paws::ECR
Paws::ECR::StartLifecyclePolicyPreview(3)
Arguments for method StartLifecyclePolicyPreview on Paws::ECR
Paws::ECS::StartTask(3)
Arguments for method StartTask on Paws::ECS
Paws::EMR::StartNotebookExecution(3)
Arguments for method StartNotebookExecution on Paws::EMR
Paws::EMRContainers::StartJobRun(3)
Arguments for method StartJobRun on Paws::EMRContainers
Paws::ES::StartElasticsearchServiceSoftwareUpdate(3)
Arguments for method StartElasticsearchServiceSoftwareUpdate on Paws::ES
Paws::ElastiCache::StartMigration(3)
Arguments for method StartMigration on Paws::ElastiCache
Paws::ElasticBeanstalk::RestartAppServer(3)
Arguments for method RestartAppServer on Paws::ElasticBeanstalk
Paws::FIS::StartExperiment(3)
Arguments for method StartExperiment on Paws::FIS
Paws::Firehose::StartDeliveryStreamEncryption(3)
Arguments for method StartDeliveryStreamEncryption on Paws::Firehose
Paws::GameLift::StartFleetActions(3)
Arguments for method StartFleetActions on Paws::GameLift
Paws::GameLift::StartGameSessionPlacement(3)
Arguments for method StartGameSessionPlacement on Paws::GameLift
Paws::GameLift::StartMatchBackfill(3)
Arguments for method StartMatchBackfill on Paws::GameLift
Paws::GameLift::StartMatchmaking(3)
Arguments for method StartMatchmaking on Paws::GameLift
Paws::Glue::StartCrawler(3)
Arguments for method StartCrawler on Paws::Glue
Paws::Glue::StartCrawlerSchedule(3)
Arguments for method StartCrawlerSchedule on Paws::Glue
Paws::Glue::StartExportLabelsTaskRun(3)
Arguments for method StartExportLabelsTaskRun on Paws::Glue
Paws::Glue::StartImportLabelsTaskRun(3)
Arguments for method StartImportLabelsTaskRun on Paws::Glue
Paws::Glue::StartJobRun(3)
Arguments for method StartJobRun on Paws::Glue
Paws::Glue::StartMLEvaluationTaskRun(3)
Arguments for method StartMLEvaluationTaskRun on Paws::Glue
Paws::Glue::StartMLLabelingSetGenerationTaskRun(3)
Arguments for method StartMLLabelingSetGenerationTaskRun on Paws::Glue
Paws::Glue::StartTrigger(3)
Arguments for method StartTrigger on Paws::Glue
Paws::Glue::StartWorkflowRun(3)
Arguments for method StartWorkflowRun on Paws::Glue
Paws::GlueDataBrew::StartJobRun(3)
Arguments for method StartJobRun on Paws::GlueDataBrew
Paws::GlueDataBrew::StartProjectSession(3)
Arguments for method StartProjectSession on Paws::GlueDataBrew
Paws::Greengrass::StartBulkDeployment(3)
Arguments for method StartBulkDeployment on Paws::Greengrass
Paws::GuardDuty::StartMonitoringMembers(3)
Arguments for method StartMonitoringMembers on Paws::GuardDuty
Paws::HealthLake::StartFHIRExportJob(3)
Arguments for method StartFHIRExportJob on Paws::HealthLake
Paws::HealthLake::StartFHIRImportJob(3)
Arguments for method StartFHIRImportJob on Paws::HealthLake
Paws::Honeycode::StartTableDataImportJob(3)
Arguments for method StartTableDataImportJob on Paws::Honeycode
Paws::ImageBuilder::StartImagePipelineExecution(3)
Arguments for method StartImagePipelineExecution on Paws::ImageBuilder
Paws::Inspector::StartAssessmentRun(3)
Arguments for method StartAssessmentRun on Paws::Inspector
Paws::IoT::StartAuditMitigationActionsTask(3)
Arguments for method StartAuditMitigationActionsTask on Paws::IoT
Paws::IoT::StartDetectMitigationActionsTask(3)
Arguments for method StartDetectMitigationActionsTask on Paws::IoT
Paws::IoT::StartOnDemandAuditTask(3)
Arguments for method StartOnDemandAuditTask on Paws::IoT
Paws::IoT::StartThingRegistrationTask(3)
Arguments for method StartThingRegistrationTask on Paws::IoT
Paws::IoTAnalytics::StartPipelineReprocessing(3)
Arguments for method StartPipelineReprocessing on Paws::IoTAnalytics
Paws::IoTDeviceAdvisor::StartSuiteRun(3)
Arguments for method StartSuiteRun on Paws::IoTDeviceAdvisor
Paws::IoTEvents::StartDetectorModelAnalysis(3)
Arguments for method StartDetectorModelAnalysis on Paws::IoTEvents
Paws::IoTJobsData::StartNextPendingJobExecution(3)
Arguments for method StartNextPendingJobExecution on Paws::IoTJobsData
Paws::Kendra::StartDataSourceSyncJob(3)
Arguments for method StartDataSourceSyncJob on Paws::Kendra
Paws::Kinesis::StartStreamEncryption(3)
Arguments for method StartStreamEncryption on Paws::Kinesis
Paws::KinesisAnalytics::StartApplication(3)
Arguments for method StartApplication on Paws::KinesisAnalytics
Paws::KinesisAnalyticsV2::StartApplication(3)
Arguments for method StartApplication on Paws::KinesisAnalyticsV2
Paws::LexModels::StartImport(3)
Arguments for method StartImport on Paws::LexModels
Paws::LexModelsV2::StartImport(3)
Arguments for method StartImport on Paws::LexModelsV2
Paws::LexRuntimeV2::StartConversation(3)
Arguments for method StartConversation on Paws::LexRuntimeV2
Paws::Lightsail::StartInstance(3)
Arguments for method StartInstance on Paws::Lightsail
Paws::Lightsail::StartRelationalDatabase(3)
Arguments for method StartRelationalDatabase on Paws::Lightsail
Paws::LookoutEquipment::StartDataIngestionJob(3)
Arguments for method StartDataIngestionJob on Paws::LookoutEquipment
Paws::LookoutEquipment::StartInferenceScheduler(3)
Arguments for method StartInferenceScheduler on Paws::LookoutEquipment
Paws::LookoutVision::StartModel(3)
Arguments for method StartModel on Paws::LookoutVision
Paws::MarketplaceCatalog::StartChangeSet(3)
Arguments for method StartChangeSet on Paws::MarketplaceCatalog
Paws::MarketplaceCommerceAnalytics::StartSupportDataExport(3)
Arguments for method StartSupportDataExport on Paws::MarketplaceCommerceAnalytics
Paws::MediaConnect::StartFlow(3)
Arguments for method StartFlow on Paws::MediaConnect
Paws::MediaLive::BatchStart(3)
Arguments for method BatchStart on Paws::MediaLive
Paws::MediaLive::StartChannel(3)
Arguments for method StartChannel on Paws::MediaLive
Paws::MediaLive::StartMultiplex(3)
Arguments for method StartMultiplex on Paws::MediaLive
Paws::MediaStore::StartAccessLogging(3)
Arguments for method StartAccessLogging on Paws::MediaStore
Paws::MediaTailor::StartChannel(3)
Arguments for method StartChannel on Paws::MediaTailor
Paws::Neptune::StartDBCluster(3)
Arguments for method StartDBCluster on Paws::Neptune
Paws::NimbleStudio::StartStudioSSOConfigurationRepair(3)
Arguments for method StartStudioSSOConfigurationRepair on Paws::NimbleStudio
Paws::OpsWorks::StartInstance(3)
Arguments for method StartInstance on Paws::OpsWorks
Paws::OpsWorks::StartStack(3)
Arguments for method StartStack on Paws::OpsWorks
Paws::OpsWorksCM::StartMaintenance(3)
Arguments for method StartMaintenance on Paws::OpsWorksCM
Paws::Polly::StartSpeechSynthesisTask(3)
Arguments for method StartSpeechSynthesisTask on Paws::Polly
Paws::RDS::StartActivityStream(3)
Arguments for method StartActivityStream on Paws::RDS
Paws::RDS::StartDBCluster(3)
Arguments for method StartDBCluster on Paws::RDS
Paws::RDS::StartDBInstance(3)
Arguments for method StartDBInstance on Paws::RDS
Paws::RDS::StartDBInstanceAutomatedBackupsReplication(3)
Arguments for method StartDBInstanceAutomatedBackupsReplication on Paws::RDS
Paws::RDS::StartExportTask(3)
Arguments for method StartExportTask on Paws::RDS
Paws::Rekognition::StartCelebrityRecognition(3)
Arguments for method StartCelebrityRecognition on Paws::Rekognition
Paws::Rekognition::StartContentModeration(3)
Arguments for method StartContentModeration on Paws::Rekognition
Paws::Rekognition::StartFaceDetection(3)
Arguments for method StartFaceDetection on Paws::Rekognition
Paws::Rekognition::StartFaceSearch(3)
Arguments for method StartFaceSearch on Paws::Rekognition
Paws::Rekognition::StartLabelDetection(3)
Arguments for method StartLabelDetection on Paws::Rekognition
Paws::Rekognition::StartPersonTracking(3)
Arguments for method StartPersonTracking on Paws::Rekognition
Paws::Rekognition::StartProjectVersion(3)
Arguments for method StartProjectVersion on Paws::Rekognition
Paws::Rekognition::StartSegmentDetection(3)
Arguments for method StartSegmentDetection on Paws::Rekognition
Paws::Rekognition::StartStreamProcessor(3)
Arguments for method StartStreamProcessor on Paws::Rekognition
Paws::Rekognition::StartTextDetection(3)
Arguments for method StartTextDetection on Paws::Rekognition
Paws::ResourceTagging::StartReportCreation(3)
Arguments for method StartReportCreation on Paws::ResourceTagging
Paws::Robomaker::RestartSimulationJob(3)
Arguments for method RestartSimulationJob on Paws::Robomaker
Paws::Robomaker::StartSimulationJobBatch(3)
Arguments for method StartSimulationJobBatch on Paws::Robomaker
Paws::SMS::StartAppReplication(3)
Arguments for method StartAppReplication on Paws::SMS
Paws::SMS::StartOnDemandAppReplication(3)
Arguments for method StartOnDemandAppReplication on Paws::SMS
Paws::SMS::StartOnDemandReplicationRun(3)
Arguments for method StartOnDemandReplicationRun on Paws::SMS
Paws::SSM::StartAssociationsOnce(3)
Arguments for method StartAssociationsOnce on Paws::SSM
Paws::SSM::StartAutomationExecution(3)
Arguments for method StartAutomationExecution on Paws::SSM
Paws::SSM::StartChangeRequestExecution(3)
Arguments for method StartChangeRequestExecution on Paws::SSM
Paws::SSM::StartSession(3)
Arguments for method StartSession on Paws::SSM
Paws::SSMContacts::StartEngagement(3)
Arguments for method StartEngagement on Paws::SSMContacts
Paws::SSMIncidents::StartIncident(3)
Arguments for method StartIncident on Paws::SSMIncidents
Paws::SSOOidc::StartDeviceAuthorization(3)
Arguments for method StartDeviceAuthorization on Paws::SSOOidc
Paws::SageMaker::ListArtifacts(3)
Arguments for method ListArtifacts on Paws::SageMaker
Paws::SageMaker::StartMonitoringSchedule(3)
Arguments for method StartMonitoringSchedule on Paws::SageMaker
Paws::SageMaker::StartNotebookInstance(3)
Arguments for method StartNotebookInstance on Paws::SageMaker
Paws::SageMaker::StartPipelineExecution(3)
Arguments for method StartPipelineExecution on Paws::SageMaker
Paws::SageMakerA2IRuntime::StartHumanLoop(3)
Arguments for method StartHumanLoop on Paws::SageMakerA2IRuntime
Paws::Schemas::StartDiscoverer(3)
Arguments for method StartDiscoverer on Paws::Schemas
Paws::Signer::StartSigningJob(3)
Arguments for method StartSigningJob on Paws::Signer
Paws::SimpleWorkflow::StartWorkflowExecution(3)
Arguments for method StartWorkflowExecution on Paws::SimpleWorkflow
Paws::StepFunctions::StartExecution(3)
Arguments for method StartExecution on Paws::StepFunctions
Paws::StepFunctions::StartSyncExecution(3)
Arguments for method StartSyncExecution on Paws::StepFunctions
Paws::StorageGateway::DescribeMaintenanceStartTime(3)
Arguments for method DescribeMaintenanceStartTime on Paws::StorageGateway
Paws::StorageGateway::StartAvailabilityMonitorTest(3)
Arguments for method StartAvailabilityMonitorTest on Paws::StorageGateway
Paws::StorageGateway::StartGateway(3)
Arguments for method StartGateway on Paws::StorageGateway
Paws::StorageGateway::UpdateMaintenanceStartTime(3)
Arguments for method UpdateMaintenanceStartTime on Paws::StorageGateway
Paws::Synthetics::StartCanary(3)
Arguments for method StartCanary on Paws::Synthetics
Paws::Textract::StartDocumentAnalysis(3)
Arguments for method StartDocumentAnalysis on Paws::Textract
Paws::Textract::StartDocumentTextDetection(3)
Arguments for method StartDocumentTextDetection on Paws::Textract
Paws::Transcribe::StartMedicalTranscriptionJob(3)
Arguments for method StartMedicalTranscriptionJob on Paws::Transcribe
Paws::Transcribe::StartTranscriptionJob(3)
Arguments for method StartTranscriptionJob on Paws::Transcribe
Paws::Transfer::StartServer(3)
Arguments for method StartServer on Paws::Transfer
Paws::Translate::StartTextTranslationJob(3)
Arguments for method StartTextTranslationJob on Paws::Translate
Paws::WorkMail::StartMailboxExportJob(3)
Arguments for method StartMailboxExportJob on Paws::WorkMail
Paws::WorkSpaces::StartWorkspaces(3)
Arguments for method StartWorkspaces on Paws::WorkSpaces
Perl::Critic::Policy::Modules::ProhibitModuleShebang(3)
don't put a #! line at the start of a module file
Plack::Loader::Restarter(3)
Restarting loader
Pod::Simple::PullParserStartToken(3)
-- start-tokens from Pod::Simple::PullParser
Prima::StartupWindow(3)
a simplistic startup banner window
Proc::InvokeEditor(3)
Perl extension for starting a text editor
Proc::ProcessTable::Match::Start(3)
Check if the start time of a process matches
Protocol::XMPP::Element::Stream(3)
handle the stream start/end tags
Rose::HTML::Form::Field::DateTime::StartDate(3)
Text field for a "start date" in a date range
Selenium::CanStartBinary(3)
Teach a WebDriver how to start its own binary aka no JRE!
Selenium::CanStartBinary::FindBinary(3)
Coercions for finding webdriver binaries on your system
Selenium::CanStartBinary::ProbePort(3)
Utility functions for finding open ports to eventually bind to
Server::Starter(3)
a superdaemon for hot-deploying server programs
Sphinx::Manager(3)
Sphinx search engine management (start/stop)
Spreadsheet::ParseODS::Workbook(3)
a workbook n .SS """->filename""" .SS "->filename" Subsection "->filename" print $workbook->filename; The name of the file if applicable. n .SS """->table_styles""" .SS "->table_styles" Subsection "->table_styles" The styles that identify whether a table is hidden, and other styles n .SS """->get_print_areas()""" .SS "->get_print_areas()" Subsection "->get_print_areas()" my $print_areas = $workbook->get_print_areas(); # [[ [$start_row, $start_col, $end_row, $end_col], ... ]] The ->get_print_areas() method returns the print areas of each sheet as an arrayref of arrayrefs. If a sheet has no print area, undef is returned for its print area. n .SS """->get_active_sheet()""" .SS "->get_active_sheet()" Subsection "->get_active_sheet()" my $sheet = $workbook->get_active_sheet(); if( !$sheet ) { # If there is no defined active worksheet, take the first: ($sheet) = $workbook->worksheets(); }; Returns the active worksheet, or if there is no such sheet, returns undef. n .SS """->worksheets()""" .SS "->worksheets()" Subsection "->worksheets()" my @sheets = $workbook->worksheets; Returns the list of worksheets as Spreadsheet::ParseODS::Worksheet objects. n .SS """->worksheet($name)""" .SS "->worksheet($name)" Subsection "->worksheet($name)" my $sheet1 = $workbook->worksheet(Sheet 1); Returns the worksheet with the given name, or if no such worksheet exists, returns undef
Spreadsheet::ParseODS::Worksheet(3)
a sheet in a workbook n .SS """get_print_areas()""" .SS "get_print_areas()" Subsection "get_print_areas()" my $print_areas = $worksheet->get_print_areas(); # [ [$start_row, $start_col, $end_row, $end_col], ... ] The ->get_print_areas() method returns the print areas of the sheet as an arrayref. Returns undef if there are no print areas
Started(4)
a tool has started
System::Command::Reaper(3)
Reap processes started by System::Command
Task::Catalyst(3)
All you need to start with Catalyst
Template::Magic::QuickStart(3), Template::Magic::QuickGuide(3)
A quick start for Webmasters
Test2::Manual::Tooling::Plugin::ToolStarts(3)
How to add behaviors that occur when a tool starts work
Test::RedisDB(3)
start redis-server for testing
Toadfarm::Command::restart(3)
Restart a Toadfarm DSL script
Toadfarm::Command::start(3)
Start a Toadfarm DSL script
Ubic::Service::Skeleton(3)
skeleton of any service with common start/stop logic
Vimana::Manual(3)
Getting started
XML::Pastor(3)
Generate Perl classes with XML bindings starting from a W3C XSD Schema
animmate(nged)
Starts the Tcl/Tk-based animation tool
begin(1)
start a new block of code
bk-initscripts(1), bk initscripts(1)
sample script for starting the daemon
bup-web(1)
Start web server to browse bup repositiory
cdv(1)
Script to start the Crashdump Viewer from the OS command line
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account show_account Display account details --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications options: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA. When used in combination with the (ga-v(ga option, the challenge URLs or FQDNs and their expected return values are shown. (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --issuance-timeout ISSUANCE_TIMEOUT This option specifies how long (in seconds) Certbot will wait for the server to issue a certificate. (default: 90) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.26.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --new-key When renewing or replacing a certificate, generate a new private key, even if --reuse-key is set on the existing certificate. Combining --new-key and --reuse- key will result in the private key being replaced and then reused in future renewals. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must-Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. show_account: Options useful for the "show_account" subcommand: plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
checkrestart(1)
check for processes that may need restarting
ct_run(1)
Program used for starting Common Test from the OS command line
ct_slave(3)
Common Test framework functions for starting and stopping nodes for Large-Scale Testing
d.path(1), d.path (1)
Finds shortest path for selected starting and ending node
domino-chain(6), Domino-Chain(6)
Rearrange dominoes on different platforms to start a chain reaction
dtimsstart(1)
launches an input method server
dtimsstartaction(5)
XCDE input method server actions
edoc_run(3)
Interface for calling EDoc from Erlang startup options
erl_call(1)
Call/start a distributed Erlang node
event(3), einit(3), estart(3), estartfn(3), etimer(3), eread(3), emouse(3), ekbd(3), ecanread(3), ecanmouse(3), ecankbd(3), ereadmouse(3), eatomouse(3), eresized(3), egetrect(3), edrawgetrect(3), emenuhit(3), emoveto(3), esetcursor(3), Event(3), Mouse(3), Menu(3)
graphics events
fish_config(1)
start the web-based configuration interface
galera_new_cluster(1)
starting a new Galera cluster
init(3)
Coordination of system startup
ipsec__plutorun(8)
internal script to (re)start pluto on old SYSV initscript systems
ipsec__realsetup(8)
internal routine to start FreeS/WAN
jconsole(1)
start a graphical console to monitor and manage Java applications
journal(nged)
Starts or stops the journaling of MGED commands to a file
kill(1), slay(1), start(1), stop(1)
print commands to manipulate processes
module-starter(1)
creates a skeleton module distribution
mojomojo_fastcgi_manage.pl(1)
script to start/stop/restart mojomojo fastcgi instance
mysql.server(1)
MySQL server startup script
mysqld_safe(1)
MySQL server startup script
net-server(1)
Base Net::Server starting module
nix-shell(1)
start an interactive shell based on a Nix expression
npm-restart(1)
Restart a package
npm-start(1)
Start a package
ompi_crcp(7), OMPI_CRCP(7)
Open MPI MCA Checkpoint/Restart Coordination Protocol (CRCP) Framework: Overview of Open MPI's CRCP framework, and selected modules. Open MPI 3.1.6
opal_crs(7), OPAL_CRS(7)
Open PAL MCA Checkpoint/Restart Service (CRS): Overview of Open PAL's CRS framework, and selected modules. Open MPI 3.1.6
opentool(1)
Command line tool for starting tools
openxpkicmd(1)
command line tool for starting OpenXPKI workflows
openxpkictl(1)
start/stop script for OpenXPKI server
orted(1)
Start an Open RTE User-Level Daemon
pastorize(1)
Generate Perl classes with XML bindings starting from a W3C XSD Schema
pathlist(nged)
Lists all existing paths that start from the specified combinations and end at a primitive shape
paths(nged)
Lists all existing paths that start from the specified path_start and end at a primitive shape
perlrequick(1)
Perl regular expressions quick start
proc_lib(3)
Functions for asynchronous and synchronous start of processes adhering to the OTP design principles
pt-slave-restart(1)
Watch and restart MySQL replication after errors
r.path(1), r.path (1)
Traces paths from starting points following input directions
red(nged)
Creates a file describing the specified combination and starts an editor for the user to modify the combination
restart(1)
-- call bin/interchange "-"r with possible su
rmid(1)
Starts the activation system daemon that enables objects to be registered and activated in a Java Virtual Machine (JVM)
rmiregistry(1)
create and start a remote object registry on the specified port on the current host
servertool(1)
Provides an easy-to-use interface for developers to register, unregister, start up, and shut down a persistent server
sio_open(3), sio_close(3), sio_setpar(3), sio_getpar(3), sio_getcap(3), sio_start(3), sio_stop(3), sio_flush(3), sio_read(3), sio_write(3), sio_onmove(3), sio_nfds(3), sio_pollfd(3), sio_revents(3), sio_eof(3), sio_setvol(3), sio_onvol(3), sio_initpar(3), SIO_BPS(3)
sndio interface to audio devices
slave(3)
Functions for starting and controlling slave nodes
squatting(1)
-- Squatting server start-up script
srv(4), 9fs(4)
start network file service
start(1)
OTP start script example for Unix
start_erl(1)
Start Erlang for embedded systems on Windows systems
start_server(1)
a superdaemon for hot-deploying server programs
startlog(4)
log processes started by the Xsession script
startlxqt(1)
script to initialize and launch LXQt sessions
string(3), s_alloc(3), s_append(3), s_array(3), s_copy(3), s_error(3), s_free(3), s_incref(3), s_memappend(3), s_nappend(3), s_new(3), s_newalloc(3), s_parse(3), s_reset(3), s_restart(3), s_terminate(3), s_tolower(3), s_putc(3), s_unique(3), s_grow(3), s_read(3), s_read_line(3), s_getline(3), s_allocinstack(3), s_freeinstack(3), s_rdinstack(3)
extensible strings
supybot-botchk(1)
A script to start Supybot if it's not already running
ted(nged)
Places the parameters of the currently edited primitive shape into a file, then starts a text editor for the user to modify the parameters
tickit_term_await_started_msec(3), tickit_term_await_started_*(3)
wait until the terminal is initialised
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
unilook(1), word(1)
display words starting or matching a string or pattern
vncsession(8)
start a VNC server
watchmen(1), watchmen(1)
watch daemons and restart
zzip_dir_alloc_ext_io(3), zzip_dir_alloc(3)
start usage
zzip_file_open(3)
start usage
zzip_fopen(3), zzip_freopen(3)
start usage
zzip_open(3), zzip_open_ext_io(3), zzip_open_shared_io(3)
start usage
zzip_opendir(3), zzip_opendir_ext_io(3)
start usage
home | help