Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
Q_INI(3), Q_NCBITS(3), Q_BT(3), Q_TC(3), Q_NTBITS(3), Q_NFCBITS(3), Q_MAXNFBITS(3), Q_NFBITS(3), Q_NIBITS(3), Q_RPSHFT(3), Q_ABS(3), Q_MAXSTRLEN(3), Q_TOSTR(3), Q_SHL(3), Q_SHR(3), Q_DEBUG(3)
fixed-point math miscellaneous functions/variables
archive_read_support_filter_all(3), archive_read_support_filter_bzip2(3), archive_read_support_filter_compress(3), archive_read_support_filter_gzip(3), archive_read_support_filter_lz4(3), archive_read_support_filter_lzma(3), archive_read_support_filter_none(3), archive_read_support_filter_rpm(3), archive_read_support_filter_uu(3), archive_read_support_filter_xz(3), archive_read_support_filter_zstd(3), archive_read_support_filter_program(3), archive_read_support_filter_program_signature(3)
functions for reading streaming archives
arp(4)
Address Resolution Protocol
arp(8)
address resolution display and control
asa(1)
interpret carriage-control characters
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3)
C API to write ATF-based test programs
atf-sh(1)
interpreter for shell-based test programs
audit_submit(3)
general purpose audit record submission
bus_dma(9), bus_dma_tag_create(9), bus_dma_tag_destroy(9), bus_dma_template_init(9), bus_dma_template_tag(9), bus_dma_template_clone(9), bus_dma_template_fill(9), BUS_DMA_TEMPLATE_FILL(9), bus_dmamap_create(9), bus_dmamap_destroy(9), bus_dmamap_load(9), bus_dmamap_load_bio(9), bus_dmamap_load_ccb(9), bus_dmamap_load_crp(9), bus_dmamap_load_crp_buffer(9), bus_dmamap_load_mbuf(9), bus_dmamap_load_mbuf_sg(9), bus_dmamap_load_uio(9), bus_dmamap_unload(9), bus_dmamap_sync(9), bus_dmamem_alloc(9), bus_dmamem_free(9)
Bus and Machine Independent DMA Mapping Interface
cap_getgrent(3), cap_getgrnam(3), cap_getgrgid(3), cap_getgrent_r(3), cap_getgrnam_r(3), cap_getgrgid_r(3), cap_setgroupent(3), cap_setgrent(3), cap_endgrent(3), cap_grp_limit_cmds(3), cap_grp_limit_fields(3), cap_grp_limit_groups(3)
library for group database operations in capability mode
carp(4)
Common Address Redundancy Protocol
chgrp(1)
change group
chkgrp(8)
check the syntax of the group file
curpriority_cmp(9), maybe_resched(9), resetpriority(9), roundrobin(9), roundrobin_interval(9), sched_setup(9), schedclock(9), schedcpu(9), setrunnable(9), updatepri(9)
perform round-robin scheduling of runnable processes
elf_rawfile(3)
return uninterpreted contents of an ELF file
elf_strptr(3)
retrieve a string pointer in a string table
getpgrp(2)
get process group
getrpcent(3), getrpcbyname(3), getrpcbynumber(3), endrpcent(3), setrpcent(3)
get RPC entry
getrpcport(3)
get RPC port number
ipcs(1)
report System V interprocess communication facilities status
jemalloc(3)
general purpose memory allocation functions
malloc.conf(5), jemalloc(5)
general purpose memory allocation functions
md5(1), sha1(1), sha224(1), sha256(1), sha384(1), sha512(1), sha512t256(1), rmd160(1), skein256(1), skein512(1), skein1024(1), md5sum(1), sha1sum(1), sha224sum(1), sha256sum(1), sha384sum(1), sha512sum(1), sha512t256sum(1), rmd160sum(1), skein256sum(1), skein512sum(1), skein1024sum(1)
calculate a message-digest fingerprint (checksum) for a file
memguard(9), MemGuard(9)
memory allocator for debugging purposes
newgrp(1)
change to a new group
pf.os(5)
format of the operating system fingerprints file
pipe(2), pipe2(2)
create descriptor pair for interprocess communication
rarpd(8)
reverse ARP daemon
rpc(3)
library routines for remote procedure calls
rpc(5)
rpc program number data base
rpc.lockd(8)
NFS file locking daemon
rpc.rquotad(8)
remote quota server
rpc.rstatd(8)
kernel statistics server
rpc.rusersd(8)
logged in users server
rpc.rwalld(8)
write messages to users currently logged in server
rpc.sprayd(8), sprayd(8)
spray server
rpc.statd(8)
host status monitoring daemon
rpc.tlsclntd(8)
Sun RPC over TLS Client Daemon
rpc.tlsservd(8)
Sun RPC over TLS Server Daemon
rpc.umntall(8)
notify NFS servers about unmounted NFS file systems
rpc.yppasswdd(8)
server for updating NIS passwords
rpc.ypxfrd(8)
NIS map transfer server
rpc_clnt_calls(3), clnt_call(3), clnt_freeres(3), clnt_geterr(3), clnt_perrno(3), clnt_perror(3), clnt_sperrno(3), clnt_sperror(3), rpc_broadcast(3), rpc_broadcast_exp(3), rpc_call(3)
library routines for client side calls
rpc_clnt_create(3), clnt_control(3), clnt_create(3), clnt_create_timed(3), clnt_create_vers(3), clnt_create_vers_timed(3), clnt_destroy(3), clnt_dg_create(3), clnt_pcreateerror(3), clnt_raw_create(3), clnt_spcreateerror(3), clnt_tli_create(3), clnt_tp_create(3), clnt_tp_create_timed(3), clnt_vc_create(3), rpc_createerr(3)
library routines for dealing with creation and manipulation of CLIENT handles
rpc_gss_get_error(3)
Get error details
rpc_gss_get_mech_info(3)
Get extra information about a security mechanism
rpc_gss_get_mechanisms(3)
Get installed mechanisms
rpc_gss_get_principal_name(3)
Get a principal name
rpc_gss_get_versions(3)
Get supported protocol version
rpc_gss_getcred(3)
Get authorization information for an RPC request
rpc_gss_is_installed(3)
Query for the presence os a security mechanism
rpc_gss_max_data_length(3)
calculate maximum data size
rpc_gss_mech_to_oid(3)
Convert a mechanism name to a GSS-API oid
rpc_gss_oid_to_mech(3)
Convert a mechanism name to a GSS-API oid
rpc_gss_qop_to_num(3)
Convert a quality of protection name to number
rpc_gss_seccreate(3)
create a security context using the RPCSEC_GSS protocol
rpc_gss_set_callback(3)
Register a security context creation callback
rpc_gss_set_defaults(3)
set service and quality of protection
rpc_gss_set_svc_name(3)
Associate a GSS-API service principal with an RPC service
rpc_gss_svc_max_data_length(3)
calculate maximum data size
rpc_secure(3)
library routines for secure remote procedure calls
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_create(3), svc_control(3), svc_create(3), svc_destroy(3), svc_dg_create(3), svc_fd_create(3), svc_raw_create(3), svc_tli_create(3), svc_tp_create(3), svc_vc_create(3)
library routines for the creation of server handles
rpc_svc_err(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3)
library routines for server side remote procedure call errors
rpc_svc_reg(3), rpc_reg(3), svc_reg(3), svc_unreg(3), svc_auth_reg(3), xprt_register(3), xprt_unregister(3)
library routines for registering servers
rpcb_getmaps(3), rpcb_getaddr(3), rpcb_gettime(3), rpcb_rmtcall(3), rpcb_set(3), rpcb_unset(3)
library routines for RPC bind service
rpcbind(8)
universal addresses to RPC program number mapper
rpcgen(1)
an RPC protocol compiler
rpcinfo(8)
report RPC information
rpcsec_gss(3), RPCSEC_GSS(3)
GSS-API based authentication for RPC
rping(1)
RDMA CM connection and RDMA ping-pong test
rpmatch(3)
determine whether the response to a question is affirmative or negative
rpoll(3)
callback functions for file descriptors and timers
set_field_userptr(3), field_userptr(3)
associate application data with a form field
set_form_userptr(3), form_userptr(3)
associate application data with a form item
set_item_userptr(3), item_userptr(3)
associate application data with a menu item
set_menu_userptr(3), menu_userptr(3)
associate application data with a menu item
setpgid(2), setpgrp(2)
set process group
sh(1)
command interpreter (shell)
soelim(1)
interpret.so requests in manpages
stpcpy(3), strcat(3), strncat(3), strchr(3), strrchr(3), strcmp(3), strncmp(3), strcasecmp(3), strncasecmp(3), strcpy(3), strncpy(3), strerror(3), strlen(3), strpbrk(3), strsep(3), strspn(3), strcspn(3), strstr(3), strtok(3), index(3), rindex(3)
string specific functions
strpbrk(3)
locate multiple characters in string
strptime(3)
parse date and time string
svc_dg_enablecache(3), svc_exit(3), svc_fdset(3), svc_freeargs(3), svc_getargs(3), svc_getreq_common(3), svc_getreq_poll(3), svc_getreqset(3), svc_getrpccaller(3), svc_pollset(3), svc_run(3), svc_sendreply(3)
library routines for RPC servers
tcgetpgrp(3)
get foreground process group ID
tcsetpgrp(3)
set foreground process group ID
telnetd(8)
DARPA TELNET protocol server
trpt(8)
transliterate protocol trace
uma(9), UMA(9)
general-purpose kernel object allocator
vmem(9)
general purpose resource allocator
xo_set_syslog_enterprise_id(3)
Set the enterprise identifier for syslog content
OSSL_STORE_SEARCH(3), OSSL_STORE_SEARCH_by_name(3), OSSL_STORE_SEARCH_by_issuer_serial(3), OSSL_STORE_SEARCH_by_key_fingerprint(3), OSSL_STORE_SEARCH_by_alias(3), OSSL_STORE_SEARCH_free(3), OSSL_STORE_SEARCH_get_type(3), OSSL_STORE_SEARCH_get0_name(3), OSSL_STORE_SEARCH_get0_serial(3), OSSL_STORE_SEARCH_get0_bytes(3), OSSL_STORE_SEARCH_get0_string(3), OSSL_STORE_SEARCH_get0_digest(3)
Type and functions to create OSSL_STORE search criteria
X509_LOOKUP(3), X509_LOOKUP_TYPE(3), X509_LOOKUP_new(3), X509_LOOKUP_free(3), X509_LOOKUP_init(3), X509_LOOKUP_shutdown(3), X509_LOOKUP_set_method_data(3), X509_LOOKUP_get_method_data(3), X509_LOOKUP_ctrl(3), X509_LOOKUP_load_file(3), X509_LOOKUP_add_dir(3), X509_LOOKUP_get_store(3), X509_LOOKUP_by_subject(3), X509_LOOKUP_by_issuer_serial(3), X509_LOOKUP_by_fingerprint(3), X509_LOOKUP_by_alias(3)
OpenSSL certificate lookup mechanisms
X509_LOOKUP_METHOD(3), X509_LOOKUP_meth_new(3), X509_LOOKUP_meth_free(3), X509_LOOKUP_meth_set_new_item(3), X509_LOOKUP_meth_get_new_item(3), X509_LOOKUP_meth_set_free(3), X509_LOOKUP_meth_get_free(3), X509_LOOKUP_meth_set_init(3), X509_LOOKUP_meth_get_init(3), X509_LOOKUP_meth_set_shutdown(3), X509_LOOKUP_meth_get_shutdown(3), X509_LOOKUP_ctrl_fn(3), X509_LOOKUP_meth_set_ctrl(3), X509_LOOKUP_meth_get_ctrl(3), X509_LOOKUP_get_by_subject_fn(3), X509_LOOKUP_meth_set_get_by_subject(3), X509_LOOKUP_meth_get_get_by_subject(3), X509_LOOKUP_get_by_issuer_serial_fn(3), X509_LOOKUP_meth_set_get_by_issuer_serial(3), X509_LOOKUP_meth_get_get_by_issuer_serial(3), X509_LOOKUP_get_by_fingerprint_fn(3), X509_LOOKUP_meth_set_get_by_fingerprint(3), X509_LOOKUP_meth_get_get_by_fingerprint(3), X509_LOOKUP_get_by_alias_fn(3), X509_LOOKUP_meth_set_get_by_alias(3), X509_LOOKUP_meth_get_get_by_alias(3), X509_OBJECT_set1_X509(3), X509_OBJECT_set1_X509_CRL(3)
Routines to build up X509_LOOKUP methods
X509_STORE(3), X509_STORE_add_cert(3), X509_STORE_add_crl(3), X509_STORE_set_depth(3), X509_STORE_set_flags(3), X509_STORE_set_purpose(3), X509_STORE_set_trust(3), X509_STORE_add_lookup(3), X509_STORE_load_locations(3), X509_STORE_set_default_paths(3)
X509_STORE manipulation
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_set1_ip_asc(3)
X509 verification parameters
X509_check_purpose(3)
Check the purpose of a certificate
openssl-srp(1), srp(1)
maintain SRP password file
"glRasterPos2d(3), glRasterPos2f(3), glRasterPos2i(3), glRasterPos2s(3), glRasterPos3d(3), glRasterPos3f(3), glRasterPos3i(3), glRasterPos3s(3), glRasterPos4d(3), glRasterPos4f(3), glRasterPos4i(3), glRasterPos4s(3), glRasterPos2dv(3), glRasterPos2fv(3), glRasterPos2iv(3), glRasterPos2sv(3), glRasterPos3dv(3), glRasterPos3fv(3), glRasterPos3iv(3), glRasterPos3sv(3), glRasterPos4dv(3), glRasterPos4fv(3), glRasterPos4iv(3), glRasterPos4sv(3)
specify the raster position for pixel operations
44bsd-csh(1), csh(1)
a shell (command interpreter) with C-like syntax
CURLOPT_PROXYUSERPWD(3)
user name and password to use for proxy authentication
CURLOPT_USERPWD(3)
user name and password to use in authentication
HPL_pdrpancrN(3)
Crout recursive panel factorization
HPL_pdrpancrT(3)
Crout recursive panel factorization
HPL_pdrpanllN(3)
Left-looking recursive panel factorization
HPL_pdrpanllT(3)
Left-looking recursive panel factorization
HPL_pdrpanrlN(3)
Right-looking recursive panel factorization
HPL_pdrpanrlT(3)
Right-looking recursive panel factorization
MPIX_Rput(3)
Put data into a memory window on a remote process
MPI_Rput(3)
Put data into a memory window on a remote process and return a request handle for the operation
Mat_VarPrint(3)
Prints the information of a MAT variable to stdout
OSSL_CMP_CTX_new(3ossl), OSSL_CMP_CTX_free(3ossl), OSSL_CMP_CTX_reinit(3ossl), OSSL_CMP_CTX_set_option(3ossl), OSSL_CMP_CTX_get_option(3ossl), OSSL_CMP_CTX_set_log_cb(3ossl), OSSL_CMP_CTX_set_log_verbosity(3ossl), OSSL_CMP_CTX_print_errors(3ossl), OSSL_CMP_CTX_set1_serverPath(3ossl), OSSL_CMP_CTX_set1_server(3ossl), OSSL_CMP_CTX_set_serverPort(3ossl), OSSL_CMP_CTX_set1_proxy(3ossl), OSSL_CMP_CTX_set1_no_proxy(3ossl), OSSL_CMP_CTX_set_http_cb(3ossl), OSSL_CMP_CTX_set_http_cb_arg(3ossl), OSSL_CMP_CTX_get_http_cb_arg(3ossl), OSSL_CMP_transfer_cb_t(3ossl), OSSL_CMP_CTX_set_transfer_cb(3ossl), OSSL_CMP_CTX_set_transfer_cb_arg(3ossl), OSSL_CMP_CTX_get_transfer_cb_arg(3ossl), OSSL_CMP_CTX_set1_srvCert(3ossl), OSSL_CMP_CTX_set1_expected_sender(3ossl), OSSL_CMP_CTX_set0_trustedStore(3ossl), OSSL_CMP_CTX_get0_trustedStore(3ossl), OSSL_CMP_CTX_set1_untrusted(3ossl), OSSL_CMP_CTX_get0_untrusted(3ossl), OSSL_CMP_CTX_set1_cert(3ossl), OSSL_CMP_CTX_build_cert_chain(3ossl), OSSL_CMP_CTX_set1_pkey(3ossl), OSSL_CMP_CTX_set1_referenceValue(3ossl), OSSL_CMP_CTX_set1_secretValue(3ossl), OSSL_CMP_CTX_set1_recipient(3ossl), OSSL_CMP_CTX_push0_geninfo_ITAV(3ossl), OSSL_CMP_CTX_set1_extraCertsOut(3ossl), OSSL_CMP_CTX_set0_newPkey(3ossl), OSSL_CMP_CTX_get0_newPkey(3ossl), OSSL_CMP_CTX_set1_issuer(3ossl), OSSL_CMP_CTX_set1_subjectName(3ossl), OSSL_CMP_CTX_push1_subjectAltName(3ossl), OSSL_CMP_CTX_set0_reqExtensions(3ossl), OSSL_CMP_CTX_reqExtensions_have_SAN(3ossl), OSSL_CMP_CTX_push0_policy(3ossl), OSSL_CMP_CTX_set1_oldCert(3ossl), OSSL_CMP_CTX_set1_p10CSR(3ossl), OSSL_CMP_CTX_push0_genm_ITAV(3ossl), OSSL_CMP_certConf_cb_t(3ossl), OSSL_CMP_certConf_cb(3ossl), OSSL_CMP_CTX_set_certConf_cb(3ossl), OSSL_CMP_CTX_set_certConf_cb_arg(3ossl), OSSL_CMP_CTX_get_certConf_cb_arg(3ossl), OSSL_CMP_CTX_get_status(3ossl), OSSL_CMP_CTX_get0_statusString(3ossl), OSSL_CMP_CTX_get_failInfoCode(3ossl), OSSL_CMP_CTX_get0_newCert(3ossl), OSSL_CMP_CTX_get1_newChain(3ossl), OSSL_CMP_CTX_get1_caPubs(3ossl), OSSL_CMP_CTX_get1_extraCertsIn(3ossl), OSSL_CMP_CTX_set1_transactionID(3ossl), OSSL_CMP_CTX_set1_senderNonce(3ossl)
functions for managing the CMP client context data structure
OSSL_STORE_SEARCH(3), OSSL_STORE_SEARCH_by_name(3), OSSL_STORE_SEARCH_by_issuer_serial(3), OSSL_STORE_SEARCH_by_key_fingerprint(3), OSSL_STORE_SEARCH_by_alias(3), OSSL_STORE_SEARCH_free(3), OSSL_STORE_SEARCH_get_type(3), OSSL_STORE_SEARCH_get0_name(3), OSSL_STORE_SEARCH_get0_serial(3), OSSL_STORE_SEARCH_get0_bytes(3), OSSL_STORE_SEARCH_get0_string(3), OSSL_STORE_SEARCH_get0_digest(3)
Type and functions to create OSSL_STORE search criteria
OSSL_STORE_SEARCH(3ossl), OSSL_STORE_SEARCH_by_name(3ossl), OSSL_STORE_SEARCH_by_issuer_serial(3ossl), OSSL_STORE_SEARCH_by_key_fingerprint(3ossl), OSSL_STORE_SEARCH_by_alias(3ossl), OSSL_STORE_SEARCH_free(3ossl), OSSL_STORE_SEARCH_get_type(3ossl), OSSL_STORE_SEARCH_get0_name(3ossl), OSSL_STORE_SEARCH_get0_serial(3ossl), OSSL_STORE_SEARCH_get0_bytes(3ossl), OSSL_STORE_SEARCH_get0_string(3ossl), OSSL_STORE_SEARCH_get0_digest(3ossl)
Type and functions to create OSSL_STORE search criteria
RkGetLex(3)
get morphemic information on each word that makes up the current candidate
SDL_WarpMouse(3)
Set the position of the mouse cursor
SRP_Calc_server_key(3ossl), SRP_Calc_A(3ossl), SRP_Calc_B_ex(3ossl), SRP_Calc_B(3ossl), SRP_Calc_u_ex(3ossl), SRP_Calc_u(3ossl), SRP_Calc_x_ex(3ossl), SRP_Calc_x(3ossl), SRP_Calc_client_key_ex(3ossl), SRP_Calc_client_key(3ossl)
SRP authentication primitives
SRP_VBASE_new(3ossl), SRP_VBASE_free(3ossl), SRP_VBASE_init(3ossl), SRP_VBASE_add0_user(3ossl), SRP_VBASE_get1_by_user(3ossl), SRP_VBASE_get_by_user(3ossl)
Functions to create and manage a stack of SRP user verifier information
SRP_create_verifier_ex(3ossl), SRP_create_verifier(3ossl), SRP_create_verifier_BN_ex(3ossl), SRP_create_verifier_BN(3ossl), SRP_check_known_gN_param(3ossl), SRP_get_default_gN(3ossl)
SRP authentication primitives
SRP_user_pwd_new(3ossl), SRP_user_pwd_free(3ossl), SRP_user_pwd_set1_ids(3ossl), SRP_user_pwd_set_gN(3ossl), SRP_user_pwd_set0_sv(3ossl)
Functions to create a record of SRP user verifier information
SSL_CTX_set_srp_username(3ossl), SSL_CTX_set_srp_password(3ossl), SSL_CTX_set_srp_strength(3ossl), SSL_CTX_set_srp_cb_arg(3ossl), SSL_CTX_set_srp_username_callback(3ossl), SSL_CTX_set_srp_client_pwd_callback(3ossl), SSL_CTX_set_srp_verify_param_callback(3ossl), SSL_set_srp_server_param(3ossl), SSL_set_srp_server_param_pw(3ossl), SSL_get_srp_g(3ossl), SSL_get_srp_N(3ossl), SSL_get_srp_username(3ossl), SSL_get_srp_userinfo(3ossl)
SRP control operations
SafeBase.tcl85(n), Safe Base(n)
A mechanism for creating and manipulating safe interpreters
Tcl_AllocStatBuf.tcl85(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_BadChannelOption.tcl85(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl86(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl87(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_CallWhenDeleted.tcl85(3), Tcl_CallWhenDeleted(3), Tcl_DontCallWhenDeleted(3)
Arrange for callback when interpreter is deleted
Tcl_CallWhenDeleted.tcl86(3), Tcl_CallWhenDeleted(3), Tcl_DontCallWhenDeleted(3)
Arrange for callback when interpreter is deleted
Tcl_CallWhenDeleted.tcl87(3), Tcl_CallWhenDeleted(3), Tcl_DontCallWhenDeleted(3)
Arrange for callback when interpreter is deleted
Tcl_CreateAlias.tcl85(3), Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateSlave(3), Tcl_GetSlave(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3)
manage multiple Tcl interpreters, aliases and hidden commands
Tcl_CreateAlias.tcl86(3), Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateChild(3), Tcl_CreateSlave(3), Tcl_GetChild(3), Tcl_GetSlave(3), Tcl_GetParent(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3)
manage multiple Tcl interpreters, aliases and hidden commands
Tcl_CreateAlias.tcl87(3), Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateChild(3), Tcl_CreateSlave(3), Tcl_GetChild(3), Tcl_GetSlave(3), Tcl_GetParent(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3)
manage multiple Tcl interpreters, aliases and hidden commands
Tcl_CreateInterp.tcl85(3), Tcl_CreateInterp(3), Tcl_DeleteInterp(3), Tcl_InterpDeleted(3)
create and delete Tcl command interpreters
Tcl_CreateInterp.tcl86(3), Tcl_CreateInterp(3), Tcl_DeleteInterp(3), Tcl_InterpActive(3), Tcl_InterpDeleted(3)
create and delete Tcl command interpreters
Tcl_CreateInterp.tcl87(3), Tcl_CreateInterp(3), Tcl_DeleteInterp(3), Tcl_InterpActive(3), Tcl_InterpDeleted(3)
create and delete Tcl command interpreters
Tcl_DeleteAssocData.tcl85(3), Tcl_GetAssocData(3), Tcl_SetAssocData(3), Tcl_DeleteAssocData(3)
manage associations of string keys and user specified data with Tcl interpreters
Tcl_DeleteAssocData.tcl86(3), Tcl_GetAssocData(3), Tcl_SetAssocData(3), Tcl_DeleteAssocData(3)
manage associations of string keys and user specified data with Tcl interpreters
Tcl_DeleteAssocData.tcl87(3), Tcl_GetAssocData(3), Tcl_SetAssocData(3), Tcl_DeleteAssocData(3)
manage associations of string keys and user specified data with Tcl interpreters
Tcl_DiscardInterpState.tcl85(3), Tcl_SaveInterpState(3), Tcl_RestoreInterpState(3), Tcl_DiscardInterpState(3), Tcl_SaveResult(3), Tcl_RestoreResult(3), Tcl_DiscardResult(3)
save and restore an interpreter's state
Tcl_DiscardInterpState.tcl86(3), Tcl_SaveInterpState(3), Tcl_RestoreInterpState(3), Tcl_DiscardInterpState(3), Tcl_SaveResult(3), Tcl_RestoreResult(3), Tcl_DiscardResult(3)
save and restore an interpreter's state
Tcl_DiscardInterpState.tcl87(3), Tcl_SaveInterpState(3), Tcl_RestoreInterpState(3), Tcl_DiscardInterpState(3), Tcl_SaveResult(3), Tcl_RestoreResult(3), Tcl_DiscardResult(3)
Save and restore the state of an an interpreter
Tcl_GetChannelError.tcl85(3), Tcl_SetChannelError(3), Tcl_SetChannelErrorInterp(3), Tcl_GetChannelError(3), Tcl_GetChannelErrorInterp(3)
functions to create/intercept Tcl errors by channel drivers
Tcl_GetChannelError.tcl86(3), Tcl_SetChannelError(3), Tcl_SetChannelErrorInterp(3), Tcl_GetChannelError(3), Tcl_GetChannelErrorInterp(3)
functions to create/intercept Tcl errors by channel drivers
Tcl_GetChannelError.tcl87(3), Tcl_SetChannelError(3), Tcl_SetChannelErrorInterp(3), Tcl_GetChannelError(3), Tcl_GetChannelErrorInterp(3)
functions to create/intercept Tcl errors by channel drivers
Tcl_GetOpenFile.tcl85(3), Tcl_GetOpenFile(3)
Return a FILE* for a channel registered in the given interpreter (Unix only)
Tcl_GetOpenFile.tcl86(3), Tcl_GetOpenFile(3)
Return a FILE* for a channel registered in the given interpreter (Unix only)
Tcl_GetOpenFile.tcl87(3), Tcl_GetOpenFile(3)
Return a FILE* for a channel registered in the given interpreter (Unix only)
Tcl_Interp.tcl85(3), Tcl_Interp(3)
client-visible fields of interpreter structures
Tcl_Interp.tcl86(3), Tcl_Interp(3)
client-visible fields of interpreter structures
Tcl_Interp.tcl87(3), Tcl_Interp(3)
client-visible fields of interpreter structures
Tcl_LimitAddHandler.tcl85(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
Tcl_LimitAddHandler.tcl86(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
Tcl_LimitAddHandler.tcl87(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
Tcl_SetRecursionLimit.tcl85(3), Tcl_SetRecursionLimit(3)
set maximum allowable nesting depth in interpreter
Tcl_SetRecursionLimit.tcl86(3), Tcl_SetRecursionLimit(3)
set maximum allowable nesting depth in interpreter
Tcl_SetRecursionLimit.tcl87(3), Tcl_SetRecursionLimit(3)
set maximum allowable nesting depth in interpreter
Tk_Attributes.tk85(3), Tk_WindowId(3), Tk_Parent(3), Tk_Display(3), Tk_DisplayName(3), Tk_ScreenNumber(3), Tk_Screen(3), Tk_X(3), Tk_Y(3), Tk_Width(3), Tk_Height(3), Tk_Changes(3), Tk_Attributes(3), Tk_IsContainer(3), Tk_IsEmbedded(3), Tk_IsMapped(3), Tk_IsTopLevel(3), Tk_ReqWidth(3), Tk_ReqHeight(3), Tk_MinReqWidth(3), Tk_MinReqHeight(3), Tk_InternalBorderLeft(3), Tk_InternalBorderRight(3), Tk_InternalBorderTop(3), Tk_InternalBorderBottom(3), Tk_Visual(3), Tk_Depth(3), Tk_Colormap(3), Tk_Interp (3)
retrieve information from Tk's local data structure
Tk_Attributes.tk86(3), Tk_WindowId(3), Tk_Parent(3), Tk_Display(3), Tk_DisplayName(3), Tk_ScreenNumber(3), Tk_Screen(3), Tk_X(3), Tk_Y(3), Tk_Width(3), Tk_Height(3), Tk_Changes(3), Tk_Attributes(3), Tk_IsContainer(3), Tk_IsEmbedded(3), Tk_IsMapped(3), Tk_IsTopLevel(3), Tk_ReqWidth(3), Tk_ReqHeight(3), Tk_MinReqWidth(3), Tk_MinReqHeight(3), Tk_InternalBorderLeft(3), Tk_InternalBorderRight(3), Tk_InternalBorderTop(3), Tk_InternalBorderBottom(3), Tk_Visual(3), Tk_Depth(3), Tk_Colormap(3), Tk_Interp (3)
retrieve information from Tk's local data structure
Tk_ChangeWindowAttributes.tk85(3), Tk_ConfigureWindow(3), Tk_MoveWindow(3), Tk_ResizeWindow(3), Tk_MoveResizeWindow(3), Tk_SetWindowBorderWidth(3), Tk_ChangeWindowAttributes(3), Tk_SetWindowBackground(3), Tk_SetWindowBackgroundPixmap(3), Tk_SetWindowBorder(3), Tk_SetWindowBorderPixmap(3), Tk_SetWindowColormap(3), Tk_DefineCursor(3), Tk_UndefineCursor(3)
change window configuration or attributes
Tk_ChangeWindowAttributes.tk86(3), Tk_ConfigureWindow(3), Tk_MoveWindow(3), Tk_ResizeWindow(3), Tk_MoveResizeWindow(3), Tk_SetWindowBorderWidth(3), Tk_ChangeWindowAttributes(3), Tk_SetWindowBackground(3), Tk_SetWindowBackgroundPixmap(3), Tk_SetWindowBorder(3), Tk_SetWindowBorderPixmap(3), Tk_SetWindowColormap(3), Tk_DefineCursor(3), Tk_UndefineCursor(3)
change window configuration or attributes
Tk_Init.tk85(3), Tk_Init(3), Tk_SafeInit(3)
add Tk to an interpreter and make a new Tk application
Tk_Init.tk86(3), Tk_Init(3), Tk_SafeInit(3)
add Tk to an interpreter and make a new Tk application
TransverseMercatorProj(1)
-- perform transverse Mercator projection
X509_LOOKUP(3), X509_LOOKUP_TYPE(3), X509_LOOKUP_new(3), X509_LOOKUP_free(3), X509_LOOKUP_init(3), X509_LOOKUP_shutdown(3), X509_LOOKUP_set_method_data(3), X509_LOOKUP_get_method_data(3), X509_LOOKUP_ctrl(3), X509_LOOKUP_load_file(3), X509_LOOKUP_add_dir(3), X509_LOOKUP_get_store(3), X509_LOOKUP_by_subject(3), X509_LOOKUP_by_issuer_serial(3), X509_LOOKUP_by_fingerprint(3), X509_LOOKUP_by_alias(3)
OpenSSL certificate lookup mechanisms
X509_LOOKUP(3ossl), X509_LOOKUP_TYPE(3ossl), X509_LOOKUP_new(3ossl), X509_LOOKUP_free(3ossl), X509_LOOKUP_init(3ossl), X509_LOOKUP_shutdown(3ossl), X509_LOOKUP_set_method_data(3ossl), X509_LOOKUP_get_method_data(3ossl), X509_LOOKUP_ctrl_ex(3ossl), X509_LOOKUP_ctrl(3ossl), X509_LOOKUP_load_file_ex(3ossl), X509_LOOKUP_load_file(3ossl), X509_LOOKUP_add_dir(3ossl), X509_LOOKUP_add_store_ex(3ossl), X509_LOOKUP_add_store(3ossl), X509_LOOKUP_load_store_ex(3ossl), X509_LOOKUP_load_store(3ossl), X509_LOOKUP_get_store(3ossl), X509_LOOKUP_by_subject_ex(3ossl), X509_LOOKUP_by_subject(3ossl), X509_LOOKUP_by_issuer_serial(3ossl), X509_LOOKUP_by_fingerprint(3ossl), X509_LOOKUP_by_alias(3ossl)
OpenSSL certificate lookup mechanisms
X509_LOOKUP_METHOD(3), X509_LOOKUP_meth_new(3), X509_LOOKUP_meth_free(3), X509_LOOKUP_meth_set_new_item(3), X509_LOOKUP_meth_get_new_item(3), X509_LOOKUP_meth_set_free(3), X509_LOOKUP_meth_get_free(3), X509_LOOKUP_meth_set_init(3), X509_LOOKUP_meth_get_init(3), X509_LOOKUP_meth_set_shutdown(3), X509_LOOKUP_meth_get_shutdown(3), X509_LOOKUP_ctrl_fn(3), X509_LOOKUP_meth_set_ctrl(3), X509_LOOKUP_meth_get_ctrl(3), X509_LOOKUP_get_by_subject_fn(3), X509_LOOKUP_meth_set_get_by_subject(3), X509_LOOKUP_meth_get_get_by_subject(3), X509_LOOKUP_get_by_issuer_serial_fn(3), X509_LOOKUP_meth_set_get_by_issuer_serial(3), X509_LOOKUP_meth_get_get_by_issuer_serial(3), X509_LOOKUP_get_by_fingerprint_fn(3), X509_LOOKUP_meth_set_get_by_fingerprint(3), X509_LOOKUP_meth_get_get_by_fingerprint(3), X509_LOOKUP_get_by_alias_fn(3), X509_LOOKUP_meth_set_get_by_alias(3), X509_LOOKUP_meth_get_get_by_alias(3), X509_OBJECT_set1_X509(3), X509_OBJECT_set1_X509_CRL(3)
Routines to build up X509_LOOKUP methods
X509_LOOKUP_METHOD(3ossl), X509_LOOKUP_meth_new(3ossl), X509_LOOKUP_meth_free(3ossl), X509_LOOKUP_meth_set_new_item(3ossl), X509_LOOKUP_meth_get_new_item(3ossl), X509_LOOKUP_meth_set_free(3ossl), X509_LOOKUP_meth_get_free(3ossl), X509_LOOKUP_meth_set_init(3ossl), X509_LOOKUP_meth_get_init(3ossl), X509_LOOKUP_meth_set_shutdown(3ossl), X509_LOOKUP_meth_get_shutdown(3ossl), X509_LOOKUP_ctrl_fn(3ossl), X509_LOOKUP_meth_set_ctrl(3ossl), X509_LOOKUP_meth_get_ctrl(3ossl), X509_LOOKUP_get_by_subject_fn(3ossl), X509_LOOKUP_meth_set_get_by_subject(3ossl), X509_LOOKUP_meth_get_get_by_subject(3ossl), X509_LOOKUP_get_by_issuer_serial_fn(3ossl), X509_LOOKUP_meth_set_get_by_issuer_serial(3ossl), X509_LOOKUP_meth_get_get_by_issuer_serial(3ossl), X509_LOOKUP_get_by_fingerprint_fn(3ossl), X509_LOOKUP_meth_set_get_by_fingerprint(3ossl), X509_LOOKUP_meth_get_get_by_fingerprint(3ossl), X509_LOOKUP_get_by_alias_fn(3ossl), X509_LOOKUP_meth_set_get_by_alias(3ossl), X509_LOOKUP_meth_get_get_by_alias(3ossl), X509_OBJECT_set1_X509(3ossl), X509_OBJECT_set1_X509_CRL(3ossl)
Routines to build up X509_LOOKUP methods
X509_STORE(3), X509_STORE_add_cert(3), X509_STORE_add_crl(3), X509_STORE_set_depth(3), X509_STORE_set_flags(3), X509_STORE_set_purpose(3), X509_STORE_set_trust(3), X509_STORE_add_lookup(3), X509_STORE_load_locations(3), X509_STORE_set_default_paths(3)
X509_STORE manipulation
X509_STORE(3ossl), X509_STORE_add_cert(3ossl), X509_STORE_add_crl(3ossl), X509_STORE_set_depth(3ossl), X509_STORE_set_flags(3ossl), X509_STORE_set_purpose(3ossl), X509_STORE_set_trust(3ossl), X509_STORE_add_lookup(3ossl), X509_STORE_load_file_ex(3ossl), X509_STORE_load_file(3ossl), X509_STORE_load_path(3ossl), X509_STORE_load_store_ex(3ossl), X509_STORE_load_store(3ossl), X509_STORE_set_default_paths_ex(3ossl), X509_STORE_set_default_paths(3ossl), X509_STORE_load_locations_ex(3ossl), X509_STORE_load_locations(3ossl)
X509_STORE manipulation
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_set1_ip_asc(3)
X509 verification parameters
X509_VERIFY_PARAM_set_flags(3ossl), X509_VERIFY_PARAM_clear_flags(3ossl), X509_VERIFY_PARAM_get_flags(3ossl), X509_VERIFY_PARAM_set_purpose(3ossl), X509_VERIFY_PARAM_get_inh_flags(3ossl), X509_VERIFY_PARAM_set_inh_flags(3ossl), X509_VERIFY_PARAM_set_trust(3ossl), X509_VERIFY_PARAM_set_depth(3ossl), X509_VERIFY_PARAM_get_depth(3ossl), X509_VERIFY_PARAM_set_auth_level(3ossl), X509_VERIFY_PARAM_get_auth_level(3ossl), X509_VERIFY_PARAM_set_time(3ossl), X509_VERIFY_PARAM_get_time(3ossl), X509_VERIFY_PARAM_add0_policy(3ossl), X509_VERIFY_PARAM_set1_policies(3ossl), X509_VERIFY_PARAM_get0_host(3ossl), X509_VERIFY_PARAM_set1_host(3ossl), X509_VERIFY_PARAM_add1_host(3ossl), X509_VERIFY_PARAM_set_hostflags(3ossl), X509_VERIFY_PARAM_get_hostflags(3ossl), X509_VERIFY_PARAM_get0_peername(3ossl), X509_VERIFY_PARAM_get0_email(3ossl), X509_VERIFY_PARAM_set1_email(3ossl), X509_VERIFY_PARAM_set1_ip(3ossl), X509_VERIFY_PARAM_get1_ip_asc(3ossl), X509_VERIFY_PARAM_set1_ip_asc(3ossl)
X509 verification parameters
X509_check_purpose(3)
Check the purpose of a certificate
X509_check_purpose(3ossl)
Check the purpose of a certificate
XAddHost(3), XAddHosts(3), XListHosts(3), XRemoveHost(3), XRemoveHosts(3), XSetAccessControl(3), XEnableAccessControl(3), XDisableAccessControl(3), XHostAddress(3), XServerInterpretedAddress(3)
control host access and host control structure
XAllocColor(3), XAllocNamedColor(3), XAllocColorCells(3), XAllocColorPlanes(3), XFreeColors(3)
allocate and free colors
XChangeWindowAttributes(3), XSetWindowBackground(3), XSetWindowBackgroundPixmap(3), XSetWindowBorder(3), XSetWindowBorderPixmap(3), XSetWindowColormap(3)
change window attributes
XIWarpPointer(3)
move a devices pointer
XWarpPointer(3)
move pointer
XkbAddSymInterpret(3)
Add a symbol interpretation to the list of symbol interpretations in an XkbCompatRec
XkbKeyActionEntry(3)
Returns a pointer to the key action corresponding to group grp and shift level lvl from the two-dimensional table of key actions associated with the key corresponding to keycode
XkbKeyGroupWidth(3)
Computes the width of the type associated with the group grp for the key corresponding to keycode
XkbKeySymEntry(3)
Returns the keysym corresponding to shift level shift and group grp from the two-dimensional array of keysyms for the key corresponding to keycode
XkbSASetGroup(3)
Sets the group_XXX field of act from the group index grp
XmContainerPaste(3)
Container widget function to insert items from the clipboard "XmContainerPaste" "XmContainer"
XmContainerPasteLink(3)
Container widget function to insert links from the clipboard "XmContainerPasteLink" "XmContainer"
XmtFocusShell(3), XmtFocusShell()(3), XmtMoveShellToPointer()(3), XmtWarpToShell()(3), XmtSetFocusToShell()(3)
change keyboard focus to a shell widget
XmtLayout(3)
a general-purpose manager widget
XmtRegisterColor(3), XmtRegisterColor()(3), XmtVaRegisterColors()(3), XmtRegisterColors()(3), XmtRegisterPixel()(3), XmtRegisterStandardColors()(3)
define symbolic color names in a color table
XmtRegisterProcedures(3), XmtRegisterProcedures()(3), XmtRegisterCallbackProcedure()(3), XmtVaRegisterCallbackProcedures()(3)
register procedures for use with the Xmt callback converter
XmtRegisterWidgetClass(3), XmtRegisterWidgetClass()(3), XmtRegisterWidgetConstructor()(3), XmtVaRegisterWidgetClasses()(3), XmtVaRegisterWidgetConstructors()(3), XmtRegisterPopupClass()(3), XmtRegisterPopupConstructor()(3)
register names for widget types
a68g(1), - a68g(1)
Algol 68 Genie, an Algol 68 compiler-interpreter
aa_defrenderparams(3)
default rendering parameters
activateCDKCalendar(3), activateCDKCalendar destroyCDKCalendar drawCDKCalendar eraseCDKCalendar getCDKCalendarBox getCDKCalendarDate getCDKCalendarDayAttribute getCDKCalendarHighlight getCDKCalendarMarker getCDKCalendarMonthAttribute getCDKCalendarYearAttribute injectCDKCalendar moveCDKCalendar newCDKCalendar positionCDKCalendar removeCDKCalendarMarker setCDKCalendar setCDKCalendarBackgroundAttrib setCDKCalendarBackgroundColor setCDKCalendarBox setCDKCalendarBoxAttribute setCDKCalendarDate setCDKCalendarDayAttribute setCDKCalendarDaysNames setCDKCalendarHighlight setCDKCalendarHorizontalChar setCDKCalendarLLChar setCDKCalendarLRChar setCDKCalendarMarker setCDKCalendarMonthAttribute setCDKCalendarMonthsNames setCDKCalendarPostProcess setCDKCalendarPreProcess setCDKCalendarULChar setCDKCalendarURChar setCDKCalendarVerticalChar setCDKCalendarYearAttribute cdk_calendar(3)
curses calendar widget
activateCDKFSlider(3), activateCDKFSlider destroyCDKFSlider drawCDKFSlider eraseCDKFSlider getCDKFSliderBox getCDKFSliderDigits getCDKFSliderHighValue getCDKFSliderLowValue getCDKFSliderValue injectCDKFSlider moveCDKFSlider newCDKFSlider positionCDKFSlider setCDKFSlider setCDKFSliderBackgroundAttrib setCDKFSliderBackgroundColor setCDKFSliderBox setCDKFSliderBoxAttribute setCDKFSliderDigits setCDKFSliderHorizontalChar setCDKFSliderLLChar setCDKFSliderLRChar setCDKFSliderLowHigh setCDKFSliderPostProcess setCDKFSliderPreProcess setCDKFSliderULChar setCDKFSliderURChar setCDKFSliderValue setCDKFSliderVerticalChar cdk_fslider(3)
curses slider widget (type float)
activateCDKSlider(3), activateCDKSlider destroyCDKSlider drawCDKSlider eraseCDKSlider getCDKSliderBox getCDKSliderHighValue getCDKSliderLowValue getCDKSliderValue injectCDKSlider moveCDKSlider newCDKSlider positionCDKSlider setCDKSlider setCDKSliderBackgroundAttrib setCDKSliderBackgroundColor setCDKSliderBox setCDKSliderBoxAttribute setCDKSliderHorizontalChar setCDKSliderLLChar setCDKSliderLRChar setCDKSliderLowHigh setCDKSliderPostProcess setCDKSliderPreProcess setCDKSliderULChar setCDKSliderURChar setCDKSliderValue setCDKSliderVerticalChar cdk_slider(3)
curses slider widget (type int)
activateCDKUSlider(3), activateCDKUSlider destroyCDKUSlider drawCDKUSlider eraseCDKUSlider getCDKUSliderBox getCDKUSliderHighValue getCDKUSliderLowValue getCDKUSliderValue injectCDKUSlider moveCDKUSlider newCDKUSlider positionCDKUSlider setCDKUSlider setCDKUSliderBackgroundAttrib setCDKUSliderBackgroundColor setCDKUSliderBox setCDKUSliderBoxAttribute setCDKUSliderHorizontalChar setCDKUSliderLLChar setCDKUSliderLRChar setCDKUSliderLowHigh setCDKUSliderPostProcess setCDKUSliderPreProcess setCDKUSliderULChar setCDKUSliderURChar setCDKUSliderValue setCDKUSliderVerticalChar cdk_uslider(3)
curses slider widget (type unsigned)
aefp(1)
calculate file fingerprint
aerpa(1), aegis remove project alias(1)
remove a project alias
aerpass(1), aegis review pass(1)
pass a change review
aerptidx(5)
aegis report index file format
aerpu(1), aegis review pass undo(1)
rescind a change review pass
airbase-ng(8)
multi-purpose tool aimed at attacking clients as opposed to the Access Point (AP) itself
apl(1)
a free APL interpreter
applydeltarpm(8)
reconstruct an rpm from a deltarpm
archive_read_filter(3), archive_read_support_filter_all(3), archive_read_support_filter_bzip2(3), archive_read_support_filter_compress(3), archive_read_support_filter_gzip(3), archive_read_support_filter_lz4(3), archive_read_support_filter_lzma(3), archive_read_support_filter_none(3), archive_read_support_filter_rpm(3), archive_read_support_filter_uu(3), archive_read_support_filter_xz(3), archive_read_support_filter_zstd(3), archive_read_support_filter_program(3), archive_read_support_filter_program_signature(3)
functions for reading streaming archives
aribas(1)
Multiprecision Arithmetic Interpreter
arp-fingerprint(1)
Fingerprint a system using ARP
arp-scan(1)
The ARP scanner
arp-sk(1)
A swiss knife tool for ARP
arpaname(1)
translate IP addresses to the corresponding ARPA names rst2man-indent-level 0 1 rstReportMargin \$1
arpdig(1)
dig an interface for arp responses
arping(8)
sends arp and/or ip pings to a given host
arpsnmp(8)
keep track of ethernet/ip address pairings
arpspoof(8)
intercept packets on a switched LAN
arpwatch(8)
keep track of ethernet/ip address pairings
asn1parse(1ossl), ca(1ossl), ciphers(1ossl), cms(1ossl), crl(1ossl), crl2pkcs7(1ossl), dgst(1ossl), dhparam(1ossl), dsa(1ossl), dsaparam(1ossl), ec(1ossl), ecparam(1ossl), enc(1ossl), engine(1ossl), errstr(1ossl), gendsa(1ossl), genpkey(1ossl), genrsa(1ossl), info(1ossl), kdf(1ossl), mac(1ossl), nseq(1ossl), ocsp(1ossl), passwd(1ossl), pkcs12(1ossl), pkcs7(1ossl), pkcs8(1ossl), pkey(1ossl), pkeyparam(1ossl), pkeyutl(1ossl), prime(1ossl), rand(1ossl), rehash(1ossl), req(1ossl), rsa(1ossl), rsautl(1ossl), s_client(1ossl), s_server(1ossl), s_time(1ossl), sess_id(1ossl), smime(1ossl), speed(1ossl), spkac(1ossl), srp(1ossl), storeutl(1ossl), ts(1ossl), verify(1ossl), version(1ossl), x509(1ossl)
OpenSSL application commands
asterisk(8)
All-purpose telephony server
astwarp(1), Warp(1)
warp (transform) input dataset
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3)
C API to write ATF-based test programs
atf-sh(1)
s shell interpreter for shell-based test programs
axa_server_cert(8)
Retrieve AXA Server Certificate Fingerprint
batch_rubber_sheet(1)
warp a set of images with a rubber-sheet transformation
bedup(8)
deduplication program with additional knowledge of burp
bpython(1)
a fancy {curtsies, curses, urwid} interface to the Python interactive interpreter
bsigs(8)
program for debugging burp protocol2 manifest files and indexes
bsparse(8)
program for regenerating burp protocol2 sparse files
bugsx(1)
display and evolve biomorphs
burp(8), Burp(8)
BackUp and Restore Program
burp_ca(8)
program for generating certificates for use with burp
bzz(1)
DjVu general purpose compression utility
calcappclient(1)
RSerPool Client (PU) for the CalcApp service
catppt(1)
reads MS-PowerPoint file and puts its content on standard output
cbmrpm41(1)
manual page for cbmrpm41 Version 0.4.99.99, built on Apr 7 2014 at 21:08:27
choparp(8)
cheap and omitted proxy ARP
chrpath(1)
change the rpath or runpath in binaries
ckpasswd(8)
nnrpd password authenticator
clig_parseCmdline(n), ::clig::parseCmdline(n)
command line interpreter for Tcl
clisp(1)
m[blue]ANSIm[]u[38]d+2 m[blue]Common Lispm[]u[1]d+2 compiler, interpreter and debugger
cmp_set_offset(3), cmp_struct(3), cmp_char(3), cmp_short(3), cmp_int(3), cmp_long(3), cmp_float(3), cmp_double(3), cmp_long_double(3), cmp_schar(3), cmp_uchar(3), cmp_ushort(3), cmp_uint(3), cmp_ulong(3), cmp_charptr(3), cmp_chararr(3)
comparison functions for qsort, bsearch, and others
combinedeltarpm(8), combindeltarpm(8)
combine multiple deltarpms to a single one
conjure(1)
interprets and executes scripts written in the Magick Scripting Language (MSL)
cookfp(1)
calculate file fingerprint "cookfp(1)" "calculate file fingerprint"
courierpassd(8)
change passwords from across the network using the Courier authentication library
courierpasswd(8), couirerpasswd(8)
Authenticate users and change passwords using the Courier authentication library
coverpg(1), make.coverpg(1)
create a fax coverpg on stdout
critcl_iassoc(n), critcl::iassoc(n)
CriTcl Utilities: Tcl Interp Associations
crrcsim(1)
a model-airplane flight simulation program
csharp(1)
Interactive C# Shell and Scripting
csi5(1), csi(1)
The CHICKEN Scheme interpreter
cspmonitor(1)
CSP server for monitoring RSerPool components
ctpp2i(1)
CTPP template iterpreter
cxGetDirParent(3)
Returns the specified directory's parent directory
cxGetDirPath(3)
Returns the full path name of the specified directory
cxGetDirPhysicalPath(3)
Returns the full physical path to the directory
cxGetFsIterPrev(3)
Returns the previous item
cxSetDirParent(3)
Sets the specified directory's parent directory
cxSetDirPhysicalPath(3)
Sets the full physical path to the directory
dMagnetic(6)
A Magnetic Scrolls Interpreter
dash(1)
command interpreter (shell)
dcmgpdir(1)
Create a general purpose DICOMDIR
delete(i4), itcl::delete(i4)
delete things in the interpreter
delete(itcl)
delete things in the interpreter
deltainfoxml2solv(1)
convert rpm-mds deltainfo format into a solv file
dgrpctl(8)
add, delete and modify newsgroups in the active file
discgrp(5gv), discrete(5gv)
group file formats
djvused(1)
Multi-purpose DjVu document editor
domain(8)
nnrpd domain resolver
drpmsync(8)
sync a file tree with deltarpms
dspam_train(1)
train a corpus of mail
dummy-ups(8)
Driver for multi-purpose UPS emulation
easyrpg-player(6)
Interpreter for RPG Maker 2000/2003 games
eiskaltdcpp-cli-jsonrpc(1), EiskaltDC++_CLI(1)
simple command line interface for EiskaltDC++ Daemon written on perl
eiskaltdcpp-cli-xmlrpc(1), EiskaltDC++_CLI(1)
simple command line interface for EiskaltDC++ Daemon written on perl
eiskaltdcpp-daemon(1)
simple daemon controllable via XMLRPC or JSONRPC
elk(1), scheme-elk(1)
extensible Scheme interpreter
endlessh(1), endless(1)
An SSH tarpit
ettercap(8)
multipurpose sniffer/content filter for man in the middle attacks
eukleides(1)
Eukleides interpreter to PostScript
euktopst(1)
Eukleides interpreter to PSTricks
explain_getpgrp(3)
explain getpgrp(2) errors require_index { }
explain_getpgrp_or_die(3)
get process group and report errors require_index { "get process group and report errors" }
explain_setpgrp(3)
explain setpgrp(2) errors require_index { }
explain_setpgrp_or_die(3)
set process group and report errors require_index { "set process group and report errors" }
exrpptm(1)
performs tone mapping on an OpenEXR image (photoreceptor)
fade_interpolate(3)
Calculates a new palette interpolated between two others. Allegro game programming library
feedback(1)
Stirring colors with a jiggling warp
fido_assert_new(3), fido_assert_free(3), fido_assert_count(3), fido_assert_rp_id(3), fido_assert_user_display_name(3), fido_assert_user_icon(3), fido_assert_user_name(3), fido_assert_authdata_ptr(3), fido_assert_blob_ptr(3), fido_assert_clientdata_hash_ptr(3), fido_assert_hmac_secret_ptr(3), fido_assert_largeblob_key_ptr(3), fido_assert_user_id_ptr(3), fido_assert_sig_ptr(3), fido_assert_id_ptr(3), fido_assert_authdata_len(3), fido_assert_blob_len(3), fido_assert_clientdata_hash_len(3), fido_assert_hmac_secret_len(3), fido_assert_largeblob_key_len(3), fido_assert_user_id_len(3), fido_assert_sig_len(3), fido_assert_id_len(3), fido_assert_sigcount(3), fido_assert_flags(3)
FIDO 2 assertion API
fido_assert_set_authdata(3), fido_assert_set_authdata_raw(3), fido_assert_set_clientdata_hash(3), fido_assert_set_count(3), fido_assert_set_extensions(3), fido_assert_set_hmac_salt(3), fido_assert_set_hmac_secret(3), fido_assert_set_up(3), fido_assert_set_uv(3), fido_assert_set_rp(3), fido_assert_set_sig(3)
set parameters of a FIDO 2 assertion
fido_cred_new(3), fido_cred_free(3), fido_cred_prot(3), fido_cred_fmt(3), fido_cred_rp_id(3), fido_cred_rp_name(3), fido_cred_user_name(3), fido_cred_display_name(3), fido_cred_authdata_ptr(3), fido_cred_authdata_raw_ptr(3), fido_cred_clientdata_hash_ptr(3), fido_cred_id_ptr(3), fido_cred_aaguid_ptr(3), fido_cred_largeblob_key_ptr(3), fido_cred_pubkey_ptr(3), fido_cred_sig_ptr(3), fido_cred_user_id_ptr(3), fido_cred_x5c_ptr(3), fido_cred_authdata_len(3), fido_cred_authdata_raw_len(3), fido_cred_clientdata_hash_len(3), fido_cred_id_len(3), fido_cred_aaguid_len(3), fido_cred_largeblob_key_len(3), fido_cred_pubkey_len(3), fido_cred_sig_len(3), fido_cred_user_id_len(3), fido_cred_x5c_len(3), fido_cred_type(3), fido_cred_flags(3), fido_cred_sigcount(3)
FIDO 2 credential API
fido_cred_set_authdata(3), fido_cred_set_authdata_raw(3), fido_cred_set_x509(3), fido_cred_set_sig(3), fido_cred_set_clientdata_hash(3), fido_cred_set_rp(3), fido_cred_set_user(3), fido_cred_set_extensions(3), fido_cred_set_blob(3), fido_cred_set_prot(3), fido_cred_set_rk(3), fido_cred_set_uv(3), fido_cred_set_fmt(3), fido_cred_set_type(3)
set parameters of a FIDO 2 credential
fido_credman_metadata_new(3), fido_credman_rk_new(3), fido_credman_rp_new(3), fido_credman_metadata_free(3), fido_credman_rk_free(3), fido_credman_rp_free(3), fido_credman_rk_existing(3), fido_credman_rk_remaining(3), fido_credman_rk(3), fido_credman_rk_count(3), fido_credman_rp_id(3), fido_credman_rp_name(3), fido_credman_rp_count(3), fido_credman_rp_id_hash_ptr(3), fido_credman_rp_id_hash_len(3), fido_credman_get_dev_metadata(3), fido_credman_get_dev_rk(3), fido_credman_del_dev_rk(3), fido_credman_get_dev_rp(3)
FIDO 2 credential management API
finch(1), Finch(1)
A Pimpin' Penguin console frontend to libpurple. Instant Messaging client
find_optimal_dimensions_for_microstrip_coupler(1), find_optimal_dimensions_for_microstrp_coupler(1)
part of atlc
fixdlsrps(1)
filter to fix DviLaser/PS documents to work with PSUtils
flow-rpt2rrd(1)
Convert flow-report CSV output to RRDtool format
flow-rptfmt(1)
Format the output of flow-report in ASCII or HTML
fractalpooluser(1)
RSerPool Client (PU) for the Fractal Generator service
fragiso(8)
split rpm packages from an iso and reassemble the iso later on
freeipmi_interpret_sel.conf(5)
specify system event log (SEL) interpretation rules
freeipmi_interpret_sensor.conf(5)
specify sensor interpretation rules
freevrrpd(8)
Virtual Redundancy Router Protocol Daemon
frotz(6)
interpreter for Infocom and other Z-Machine games
frr-eigrpd(8)
an EIGRP routing engine for use with FRRouting
ftpd(8)
DARPA Internet File Transfer Protocol server
fwbedit(1)
General purpose object tree editing tool
gchgrp(1), chgrp(1)
change group ownership
geoLnArr(3), GeoLnArr(3), GeoLnArrCreate(3), GeoLnArrSetDescr(3), GeoLnArrSetAlloc(3), GeoLnArrAddLine(3), GeoLnArrPutLine(3), GeoLnArrContainGeoPt(3), GeoLnArrGetDescr(3), GeoLnArrGetInfo(3), GeoLnArrGetLine(3), GeoLnArrFree(3), GeoLnArrDestroy(3)
manage GeoLnArr objects, which are containers for GeoLn objects
get-edid(1), parse-edid(1)
read-edid tools to retrieve and interpret monitor specifications using the VESA VBE DDC protocol
get-iab(1)
Fetch the arp-scan IAB file from the IEEE website
get-oui(1)
Fetch the arp-scan OUI file from the IEEE website
get-wcs(1)
Try to interpret an existing WCS header
git-interpret-trailers(1)
Add or parse structured information in commit messages
glColorPointer(3), "glColorPointer(3)
define an array of colors
gl_triangle(3)
draw a triangle with interpolated colors
glutReportErrors(3)
for debugging purposes; prints out OpenGL run-time errors
glutWarpPointer(3)
warps the pointer's location
gnutls_fingerprint(3)
API function
gnutls_srp_allocate_client_credentials(3)
API function
gnutls_srp_allocate_server_credentials(3)
API function
gnutls_srp_base64_decode(3)
API function
gnutls_srp_base64_decode2(3)
API function
gnutls_srp_base64_encode(3)
API function
gnutls_srp_base64_encode2(3)
API function
gnutls_srp_free_client_credentials(3)
API function
gnutls_srp_free_server_credentials(3)
API function
gnutls_srp_server_get_username(3)
API function
gnutls_srp_set_client_credentials(3)
API function
gnutls_srp_set_client_credentials_function(3)
API function
gnutls_srp_set_prime_bits(3)
API function
gnutls_srp_set_server_credentials_file(3)
API function
gnutls_srp_set_server_credentials_function(3)
API function
gnutls_srp_set_server_fake_salt_seed(3)
API function
gnutls_srp_verifier(3)
API function
gnutls_x509_crq_get_key_purpose_oid(3)
API function
gnutls_x509_crq_set_key_purpose_oid(3)
API function
gnutls_x509_crt_check_key_purpose(3)
API function
gnutls_x509_crt_get_fingerprint(3)
API function
gnutls_x509_crt_get_key_purpose_oid(3)
API function
gnutls_x509_crt_set_key_purpose_oid(3)
API function
gnutls_x509_ext_export_key_purposes(3)
API function
gnutls_x509_ext_import_key_purposes(3)
API function
gnutls_x509_key_purpose_deinit(3)
API function
gnutls_x509_key_purpose_get(3)
API function
gnutls_x509_key_purpose_init(3)
API function
gnutls_x509_key_purpose_set(3)
API function
gosh(1)
a Scheme script interpreter
gpg-key2latex(1)
Generate a LaTeX file for fingerprint slips
grpn(1)
GTK+ reverse polish notation calculator
gs(1)
Ghostscript (PostScript and PDF language interpreter and previewer)
gsi(1)
Gambit Scheme Interpreter and Compiler
guaclog(1)
Guacamole input log interpreter
harp(1)
play and manage music
hashdig-resolve-sunsolve(1), hashdig-resolve-sunsolve.pl(1)
Resolve hashes against Sun's Solaris Fingerprint Database
hp48cc(1)
C to HP48 RPN compiler
hsdump(1)
Dumps the handlespace of a RSerPool Registrar
http_servlet_xmlrpc(3)
HTTP servlet for XML-RPC requests
http_xml_send(3), http_xml_send_xmlrpc(3)
XML and XML-RPC requests over HTTP
hunspell(1)
spell checker, stemmer and morphological analyzer
hunspell(3)
spell checking, stemming, morphological generation and analysis
icmpinfo(1)
interpret ICMP messages
ident(8)
nnrpd ident resolver
idevicedebugserverproxy(1)
Remote debugging proxy
imwheel(1)
a mouse wheel and stick interpreter for X Windows
inc(1)
incorporate new mail to an nmh folder
incm(1)
Incorporating new mails for Mew
info.tcl85(n), info(n)
Return information about the state of the Tcl interpreter
info.tcl86(n), info(n)
Return information about the state of the Tcl interpreter
info.tcl87(n), info(n)
Information about the state of the Tcl interpreter
inn-radius.conf(5)
Configuration for nnrpd RADIUS authenticator
instead(6), INSTEAD(6)
Simple Text Adventure Engine, The Interpreter
interp.tcl85(n), interp(n)
Create and manipulate Tcl interpreters
interp.tcl86(n), interp(n)
Create and manipulate Tcl interpreters
interp.tcl87(n), interp(n)
Create and manipulate Tcl interpreters
ipmi-pet(8), IPMI(8)
IPMI Platform Event Trap Interpreter
irpty(1)
pseudo tty driver
isablsimilarexpr(3)
tests if two expressions have the same morphology. man1/alc_origin.1
j-jconsole(1), jconsole(1)
command line J interpreter
julius(1)
open source multi-purpose LVCSR engine
kcpolymgr(1)
command line interface to manage the polymorphic database
kcpolytest(1)
command line interface to test the polymorphic database
kftp(1), ftp(1)
ARPANET file transfer program
kgendesignerplugin(1)
Generates widget plugins for Qt(TM) Designer
kjs5(1)
KDE ECMAScript compatible interpreter
kjscmd5(1)
Frameworks KJSEmbed interpreter
krill(1)
Resource Public Key Infrastructure (RPKI) daemon
krillc(1)
Command line client for the Krill RPKI daemon
ktelnetd(8), telnetd(8)
DARPA TELNET protocol server
lat_connect(8)
measure interprocess connection latency via TCP/IP
lat_pipe(8)
measure interprocess communication latency through pipes
lat_rpc(8)
measure interprocess communication latency via Sun RPC
lat_tcp(8)
measure interprocess communication latency via TCP/IP
lat_udp(8)
measure interprocess communication latency via UDP/IP
lat_unix(8)
measure interprocess communication latency via UNIX sockets
lat_unix_connect(8)
measure interprocess connection latency via UNIX sockets
libauth(3)
routines for writing nnrpd resolvers and authenticators
libcw(3)
general purpose Morse code functions library
libpdel(3)
multi-purpose C library for embedded applications
libvmmalloc(7)
general purpose volatile memory allocation library
libzzuf(3)
helper library for the zzuf multiple purpose fuzzer
lightning-help(7)
Command to return all information about RPC commands
lightning-plugin(7)
Manage plugins with RPC
llvm-install-name-tool-devel(1), llvm-install-name-tool(1)
LLVM tool for manipulating install-names and rpaths
llvm-install-name-tool12(1), llvm-install-name-tool(1)
LLVM tool for manipulating install-names and rpaths
loadTk.tk85(n), loadTk(n)
Load Tk into a safe interpreter
lprps(8)
lpr PostScript communication filter
lua51(1), lua(1)
Lua interpreter
lua52(1), lua(1)
Lua interpreter
lua53(1), lua(1)
Lua interpreter
lua54(1), lua(1)
Lua interpreter
lynx(1)
a general purpose distributed information browser for the World Wide Web
mac-vendor(5)
Ethernet vendor file for arp-scan
makecert(1), MakeCert(1)
Create X.509 certificates for test purposes
makedeltarpm(8)
create a deltarpm from two rpms
makeindex(1)
a general purpose, formatter-independent index processor
manaplus(6)
ManaPlus: A 2D MMORPG client
mate-charpick-applet(1)
Character Picker Applet for the MATE panel
math2oogl(1gv)
convert Mathematica grphics object to OOGL format
microdowell(8)
Driver for Microdowell Enterprise UPS series
mime(1), MIME(1)
Multipurpose Internet Mail Extensions
minc(1)
incorporate new messages
mkbingram(1)
make binary N-gram from ARPA N-gram file
morph(3), morphinit(3)
re_morphinit, morphstr, morphword
morph3d(6)
3d morphing objects
morphy(7)
discussion of WordNet's morphological processing
mosh(1)
A Fast R6RS Scheme Interpreter
murphi2c(1)
translate a Murphi model to C for simulation
murphi2murphi(1)
preprocessor for Murphi models
murphi2xml(1)
Print the abstract syntax tree of a parsed Murphi model
mutool(1)
all purpose tool for dealing with PDF files
mydnsptrconvert(8)
Convert pre-0.9.12 PTR table format to in-addr.arpa zones
ndrdump(1)
DCE/RPC Packet Parser and Dumper
neverputt(6)
3D miniature golf game
nnrpd(8)
NNTP server for reader clients
nnrpd.track(5)
file to specify hosts to be tracked by nnrpd
notmuch-new(1)
incorporate new mail into the notmuch database
nxsh.nx(1), nxsh(1)
Simple shell containing NSF/NX interpreter
nxwish.nx(1), nxwish(1)
Simple windowing shell containing NSF/NX interpreter
ocamlrun(1)
The OCaml bytecode interpreter
ocf_heartbeat_SendArp(7)
Broadcasts unsolicited ARP announcements
oct-propagation_spectrum(1)
Calculates the absorption cross-section tensor from a time-propagation run
onyx(1)
stand-alone Onyx language interpreter
openssl-srp(1), srp(1)
maintain SRP password file
openssl-srp(1ossl)
maintain SRP password file
orpie(1)
is a console-based RPN calculator with an interactive visual stack
orpie-curses-keys(1)
is a small utility designed to assist in the creation of an orpierc(5) file
orpierc(5)
is the configuration textfile for the orpie(1) console calculator
ovdb_server(8)
Overview helper server for nnrpd
packetforge-ng(1)
forge packets: ARP, UDP, ICMP or custom packets
pacpl(1)
Perl Audio Converter, a multi purpose converter/ripper/tagger
pambayer(1)
interpret Bayer patterns synopsis
pammasksharpen(1)
Sharpen an image via an unsharp mask synopsis
pamsharpmap(1)
create map of sharpness in a PNM/PAM image lbAC
pamsharpness(1)
measure the sharpness of a PNM/PAM image synopsis
pamstretch(1)
scale up a PNM or PAM image by interpolating between pixels. synopsis
pamtris(1)
triangle rasterizer featuring perspective-correct interpolation of generic vertex attributes and depth buffering synopsis
paperinfo(3), paperwithsize(3), paperfirst(3), paperlast(3), papernext(3), paperprev(3)
return informations about a paper
parpd(8)
Proxy-ARP daemon
pbmtextps(1)
render text into a PBM image using a postscript interpreter synopsis
perp-setup(8)
initialize a perp installation
perp_intro(8)
introduction to the perp service management framework
perpboot(8)
startup utility for perpd (8) and an associated logger
perpctl(8)
runtime control utility for perpd (8) services
perpd(8)
persistent process scanner/supervisor/controller
perpetrate(5)
conventions for runscripts
perpetrate(8)
supervise a persistent process and optional logger
perphup(8)
trigger a perpd (8) rescan
perpls(8)
persistent process service lister
perpok(8)
check a perpd (8) service
perpstat(8)
display current status of perpd (8) services
pgmmorphconv(1)
perform morphological convolutions: dilation, erosion synopsis
pgrphack(8)
runs a program in a separate process group
pingpongclient(1)
RSerPool Client (PU) for the PingPong service
pkg-autoremove(8), pkg autoremove(8)
removes orphan packages
pkg_repos(3), pkg_repos_total_count(3), pkg_repos_activated_count pkg_repo_url(3), pkg_repo_ident(3), pkg_repo_name(3), pkg_repo_ident_from_name pkg_repo_key(3), pkg_repo_fingerprints pkg_repo_signature_type(3), pkg_repo_mirror_type(3), pkg_repo_enabled pkg_repo_priority(3), pkg_repo_find_ident(3), pkg_repo_find_name(3)
manipulate repositories
pnminterp(1)
replaced by pamstretch
ponscr(6)
the Ponscripter novel-game interpreter
powerpanel(8)
Driver for serial PowerPanel Plus compatible UPS equipment
powerpc-unknown-freebsd13.0-as(1), AS(1)
the portable GNU assembler
powerpc-unknown-freebsd13.0-dlltool(1), dlltool(1)
create files needed to build and use DLLs
powerpc-unknown-freebsd13.0-g++9(1), gcc(1)
GNU project C and C++ compiler
powerpc-unknown-freebsd13.0-gcc9(1), gcc(1)
GNU project C and C++ compiler
powerpc-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
offline gcda and gcno profile dump tool
powerpc-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
offline gcda profile processing tool
powerpc-unknown-freebsd13.0-gcov9(1), gcov(1)
coverage testing tool
powerpc-unknown-freebsd13.0-windmc(1), windmc(1)
generates Windows message resources
powerpc-unknown-freebsd13.0-windres(1), windres(1)
manipulate Windows resources
powerpc64-unknown-freebsd13.0-as(1), AS(1)
the portable GNU assembler
powerpc64-unknown-freebsd13.0-dlltool(1), dlltool(1)
create files needed to build and use DLLs
powerpc64-unknown-freebsd13.0-g++6(1), gcc(1)
GNU project C and C++ compiler
powerpc64-unknown-freebsd13.0-g++9(1), gcc(1)
GNU project C and C++ compiler
powerpc64-unknown-freebsd13.0-gcc6(1), gcc(1)
GNU project C and C++ compiler
powerpc64-unknown-freebsd13.0-gcc9(1), gcc(1)
GNU project C and C++ compiler
powerpc64-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
offline gcda and gcno profile dump tool
powerpc64-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
offline gcda and gcno profile dump tool
powerpc64-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
offline gcda profile processing tool
powerpc64-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
offline gcda profile processing tool
powerpc64-unknown-freebsd13.0-gcov6(1), gcov(1)
coverage testing tool
powerpc64-unknown-freebsd13.0-gcov9(1), gcov(1)
coverage testing tool
powerpc64-unknown-freebsd13.0-windmc(1), windmc(1)
generates Windows message resources
powerpc64-unknown-freebsd13.0-windres(1), windres(1)
manipulate Windows resources
powerpc64le-unknown-freebsd13.0-as(1), AS(1)
the portable GNU assembler
powerpc64le-unknown-freebsd13.0-dlltool(1), dlltool(1)
create files needed to build and use DLLs
powerpc64le-unknown-freebsd13.0-windmc(1), windmc(1)
generates Windows message resources
powerpc64le-unknown-freebsd13.0-windres(1), windres(1)
manipulate Windows resources
pppoe-setup(8)
Shell script to configure RP-PPPoE client
pwsafe(1)
commandline password database utility compatible with Counterpane's Passwordsafe
python2.7(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.6(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.7(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.8(1), python(1)
an interpreted, interactive, object-oriented programming language
python3.9(1), python(1)
an interpreted, interactive, object-oriented programming language
qconfirm-inject(1)
set Message-ID and VERP and send a mail message
qmidiarp(1)
MIDI arpeggiator and LFO
quat_interpolate(3)
Constructs a quaternion representing a rotation between from and to. Allegro game programming library
quat_slerp(3)
Version of quat_interpolate() allowing control over the rotation. Allegro game programming library
radius(8)
nnrpd RADIUS password authenticator
rcvstore(1)
asynchronously incorporate mail into an nmh folder
readers.conf(5)
Access control and configuration for nnrpd
regina(1)
The Regina Rexx Interpreter
regina-config(1)
Developer Configuration for The Regina Rexx interpreter
regmath(1)
Mathematics libraries for Regina REXX interpreter
regutil(1)
RexxUtil library for Regina REXX interpreter
rendertarget_noclear(3), rendertarget_noclear (3)
Enable / Disable clearing a rendertarget before a renderpass
rep(1)
Librep Interpreter
residualvm(6)
interpreter for several 3D games
rgw-orphan-list(8)
list rados objects that are not indexed by rgw
rlatopam(1)
convert Alias/Wavefront RLA and RPF image files to PAM image files. synopsis
rleinterp(1), rleintrp(1)
Interpolate between 2 RLE images
routinator(1)
RPKI relying party software
rpad(1)
Reserved Port Allocation Daemon
rpcclient(1)
tool for executing client side MS-RPC functions
rpdump(1)
alpine remote data utility
rpki-client(8)
RPKI validator to support BGP Origin Validation
rpki-rov(1)
rpki route origin validator
rpl(1), rpl (RePLace)(1)
replace strings in multiple files
rplay(1)
play, pause, continue, and stop sounds
rplay.conf(5)
rplay sound database
rplay.helpers(5)
rplay helper applications
rplay.hosts(5)
rplay host authentication database
rplay.servers(5)
rplay servers database
rplayd(8)
rplay sound server
rpload(1)
alpine remote data utility
rpm(8)
RPM Package Manager
rpm2archive(8)
Create tar archive from RPM Package Manager (RPM) package
rpm2cpio(8)
Extract cpio archive from RPM Package Manager (RPM) package
rpmbuild(8)
Build RPM Package(s)
rpmdb(8)
RPM Database Tool
rpmdb2solv(1)
convert the rpm database into a solv file
rpmdeps(8)
Generate RPM Package Dependencies
rpmgraph(8)
Display RPM Package Dependency Graph
rpmkeys(8)
RPM Keyring
rpmmd2solv(1)
convert files in rpm-md format into a solv file
rpms2solv(1)
convert one or more rpms into a solv file
rpmsign(8)
RPM Package Signing
rpmspec(8)
RPM Spec Tool
rpntutorial(1)
Reading RRDtool RPN Expressions by Steve Rader
rpoll(l)
callback functions for file descriptors and timers
rpost(1)
post an article to an NNTP news server
rpp(3), rpp_open(3), rpp_bind(3), rpp_poll(3), rpp_io(3), rpp_read(3), rpp_write(3), rpp_close(3), rpp_getaddr(3), rpp_flush(3), rpp_terminate(3), rpp_shutdown(3), rpp_rcommit(3), rpp_wcommit(3), rpp_eom(3), rpp_getc(3), rpp_putc(3)
reliable packet protocol
rpslcheck(1)
an RPSL syntax checker
rptp(1)
communicate with rplayd using RPTP
rrdgraph_rpn(1)
About RPN Math in rrdtool graph
rspregistrar(1)
RSerPool Pool Registrar (PR) Service
rspserver(1)
RSerPool Server (PE) for multiple example services
rspterminal(1)
RSerPool terminal (PU) for services like Echo, Discard, Daytime, CharGen
rtrclient(1)
rtr rpki client
ruby(1)
Interpreted object-oriented scripting language
runawk(1)
wrapper for AWK interpreter
runawk_modules(3), runawk(3)
wrapper for AWK interpreter
runscript(1)
script interpreter for minicom
rxqueue(1)
The Regina Rexx Interpreter external queue filter
rxstack(1)
The Regina Rexx Interpreter stack daemon
s7(1)
interpreter for the Seed7 programming language
safe.tcl86(n), safe(n)
Creating and manipulating safe interpreters
safe.tcl87(n), safe(n)
Creating and manipulating safe interpreters
safe_loadTk.tk86(n), safe::loadTk(n)
Load Tk into a safe interpreter
sane-ma1509(5)
SANE backend for Mustek BearPaw 1200F USB scanner
sane-sharp(5)
SANE backend for SHARP scanners
sane-u12(5)
SANE backend for Plustek USB flatbed scanners, based on older parport designs
sc_ARMCIMemoryGrp(3), sc::ARMCIMemoryGrp(3)
The ARMCIMemoryGrp concrete class provides an implementation of MsgMemoryGrp
sc_ActiveMsgMemoryGrp(3), sc::ActiveMsgMemoryGrp(3)
The ActiveMsgMemoryGrp abstract class specializes the MsgMemoryGrp class
sc_FileGrp(3), sc::FileGrp(3)
The FileGrp abstract class provides a way of accessing distributed file in a parallel machine
sc_GrpArithmeticAndReduce(3), sc::GrpArithmeticAndReduce<(3)
T >
sc_GrpArithmeticOrReduce(3), sc::GrpArithmeticOrReduce<(3)
T >
sc_GrpArithmeticXOrReduce(3), sc::GrpArithmeticXOrReduce<(3)
T >
sc_GrpFunctionReduce(3), sc::GrpFunctionReduce<(3)
T >
sc_GrpMaxReduce(3), sc::GrpMaxReduce<(3)
T >
sc_GrpMinReduce(3), sc::GrpMinReduce<(3)
T >
sc_GrpProductReduce(3), sc::GrpProductReduce<(3)
T >
sc_GrpReduce(3), sc::GrpReduce<(3)
T >
sc_GrpSumReduce(3), sc::GrpSumReduce<(3)
T >
sc_MPIMessageGrp(3), sc::MPIMessageGrp(3)
The MPIMessageGrp class is an concrete implementation of MessageGrp that uses the MPI 1 library
sc_MTMPIMemoryGrp(3), sc::MTMPIMemoryGrp(3)
This MemoryGrp class requires a MT-safe MPI implementation
sc_MemoryGrp(3), sc::MemoryGrp(3)
The MemoryGrp abstract class provides a way of accessing distributed memory in a parallel machine
sc_MemoryGrpBuf(3), sc::MemoryGrpBuf< data_t >(3)
The MemoryGrpBuf class provides access to pieces of the global shared memory that have been obtained with MemoryGrp
sc_MessageGrp(3), sc::MessageGrp(3)
The MessageGrp abstract class provides a mechanism for moving data and objects between nodes in a parallel machine
sc_MsgMemoryGrp(3), sc::MsgMemoryGrp(3)
A MsgMemoryGrp that initializes its data using a messagegrp
sc_MsgStateBufRecv(3), sc::MsgStateBufRecv(3)
The MsgStateBufRecv is an abstract base class that buffers objects sent through a MessageGrp
sc_MsgStateRecv(3), sc::MsgStateRecv(3)
The MsgStateRecv is an abstract base class that receives objects from nodes in a MessageGrp
sc_MsgStateSend(3), sc::MsgStateSend(3)
The MsgStateSend is an abstract base class that sends objects to nodes in a MessageGrp
sc_ProcFileGrp(3), sc::ProcFileGrp(3)
The ProcFileGrp concrete class provides an implementation of FileGrp for a single processor
sc_ProcMemoryGrp(3), sc::ProcMemoryGrp(3)
The ProcMemoryGrp concrete class provides an implementation of MemoryGrp for a single processor
sc_ProcMessageGrp(3), sc::ProcMessageGrp(3)
ProcMessageGrp provides a concrete specialization of MessageGrp that supports only one node
sc_ProcThreadGrp(3), sc::ProcThreadGrp(3)
The ProcThreadGrp class privides a concrete thread group appropriate for an environment where there is only one thread
sc_PthreadThreadGrp(3), sc::PthreadThreadGrp(3)
The PthreadThreadGrp class privides a concrete thread group appropriate for an environment where pthreads is available
sc_PumaThreadGrp(3), sc::PumaThreadGrp(3)
The PumaThreadGrp class privides a concrete thread group appropriate for the intel teraflops machine
sc_RDMAMemoryGrp(3), sc::RDMAMemoryGrp(3)
The RDMAMemoryGrp abstract class specializes the MsgMemoryGrp class
sc_ShmMemoryGrp(3), sc::ShmMemoryGrp(3)
The ShmMemoryGrp concrete class provides an implementation of MsgMemoryGrp
sc_ShmMessageGrp(3), sc::ShmMessageGrp(3)
The ShmMessageGrp class is an implementation of MessageGrp that allows multiple process to be started that communicate with shared memory
sc_StateRecv(3), sc::StateRecv(3)
StateRecv is a concrete specialization of MsgStateRecv that does the receive part of point to point communication in a MessageGrp
sc_StateSend(3), sc::StateSend(3)
StateSend is a concrete specialization of MsgStateSend that does the send part of point to point communication in a MessageGrp
sc_ThreadGrp(3), sc::ThreadGrp(3)
The ThreadGrp abstract class provides a means to manage separate threads of control
sc_ThreadLock(3), sc::ThreadLock(3)
The ThreadLock abstract class provides mutex locks to be used in conjunction with ThreadGrp's
sc_filterpolicy(1)
scamper driver to test systems for congruent filtering policy
sc_intMessageGrp(3), sc::intMessageGrp(3)
Uses integer message types to send and receive messages
scheme48(1)
a Scheme interpreter
scm(1)
a Scheme Language Interpreter
scriptingclient(1)
RSerPool Client (PU) for the Scripting service
set_field_userptr(3x), field_userptr(3x)
associate application data with a form field
set_form_userptr(3x), form_userptr(3x)
associate application data with a form item
set_item_userptr(3x), item_userptr(3x)
associate application data with a menu item
set_menu_userptr(3x), menu_userptr(3x)
associate application data with a menu item
sg_get_error(3), sg_get_error_arg(3), sg_get_error_errno(3), sg_str_error(3), sg_get_error_details(3), sg_strperror(3)
get last error status
sh(1), jsh(1)
the standard command interpreter
shairport-sync(7)
Synchronised Audio Player for iTunes / AirPlay
sharpconstruct(1)
Interactive 3D modeling package
shntool(1)
a multi(hypurpose WAVE data processing and reporting utility
sierpinski(6)
draws Sierpinski triangle fractals
sierpinski3d(6)
3D Sierpinski triangle fractal
siod(1)
small scheme interpreter (Scheme In One Defun)
sk(1), "sketchy(1)
SketchyLISP interpreter
slirpvde(1)
Virtual Distributed Ethernet-Slirp interface
slisp(1)
Simple Lisp interpreter
slsh(1)
Interpreter for S-Lang scripts
slurp(1)
select a region in a Wayland compositor
smenc(1)
Program to encode a wav file into a SpectMorph model
smi(1)
Simple Markup Interpreter / Filter for simple markup
sminspector(1)
program to visualize contents of SpectMorph instruments
smjack(1)
SpectMorph JACK Client
smplay(1)
Program to play a SpectMorph model
smsfimport(1)
program to create SpectMorph models from SoundFont presets
smstrip(1)
program to remove extra data from SpectMorph model files
smtool(1)
tool to show/change SpectMorph data from .sm/.smset files
smwavset(1)
Program to manage spectmorph multiwave files
snarf(1)
Simple Non-interactive All-purpose Resource Fetcher
snobol4(1)
SNOBOL4 interpreter
snobol4(1)
SNOBOL4 interpreter command line syntax
socat(1)
Multipurpose relay (SOcket CAT)
soelim(1)
interpret.so requests in manpages
soldout_buffer(3), bufcasecmp(3), bufcmp(3), bufcmps(3), bufdup(3), bufgrow(3), bufnew(3), bufnullterm(3), bufprintf(3), bufput(3), bufputs(3), bufputc(3), bufrelease(3), bufreset(3), bufset(3), bufslurp(3), buftoi(3), vbufprintf(3)
buffer handling functions for soldout
spec-beautifier(1)
program to clean up RPM .spec files
spectmorphoscgui(1)
helper application for SpectMorph BEAST plugin
spline(1)
interpolate datasets using splines under tension
spline(n)
Fit curves with spline interpolation
sqlsharp(1)
Mono SQL Query command-line tool
srptool(1), *[B-Font]srptool(1)
GnuTLS SRP tool
starconvert(1)
convert text data files to StarPlot format
starpkg(1)
convert a StarPlot data set to StarPlot file format
starplot(1)
view 3d perspective maps of stars
strptime(1)
Parse input from stdin according to one of the given formats FORMATs
structs_xmlrpc(3)
structs support for XML-RPC
superquadrics(6)
morphing 3d shapes
synos(1)
guess operating system from TCP SYN fingerprint
tauthon2.8(1), tauthon(1)
an interpreted, interactive, object-oriented programming language
tcbasic(1)
a small BASIC Interpreter written in C
tclsh.tcl85(1), tclsh(1)
Simple shell containing Tcl interpreter
tclsh.tcl86(1), tclsh(1)
Simple shell containing Tcl interpreter
tclsh.tcl87(1), tclsh(1)
Simple shell containing Tcl interpreter
termkey_interpret_csi(3)
interpret unrecognised CSI sequence
termkey_interpret_modereport(3)
interpret opaque mode report data
termkey_interpret_mouse(3)
interpret opaque mouse event data
termkey_interpret_position(3)
interpret opaque cursor position event data
termkey_interpret_string(3)
fetch stored control string
termkey_strpkey(3)
parse a string representing a key event
tlci(8)
tiny lambda calculus interpreter
tpm2_setprimarypolicy(1), tpm2_setprimarypolicy(1)(1)
Sets the authorization policy for the lockout (lockoutPolicy), the platform hierarchy (platformPolicy), the storage hierarchy (ownerPolicy), and the endorsement hierarchy (endorsementPolicy)
tsplot(1)
Plot several tsung logs on the same charts, for comparison purpose
ttrace(n)
Trace-based interpreter initialization
unibi_format(3), unibi_run(3)
interpret a terminfo format string
updateinfoxml2solv(1)
convert rpm-mds updateinfo.xml format into a solv file
urxvtperl(3)
rxvt-unicode's embedded perl interpreter
ustrpbrk(3)
Finds the first character that matches any in a set. Allegro game programming library
v7sh(1), sh(1), for(1), case(1), if(1), while(1), : (1), . (1), break(1), continue(1), cd(1), eval(1), exec(1), exit(1), export(1), login(1), newgrp(1), read(1), readonly(1), set(1), shift(1), times(1), trap(1), umask(1), wait(1)
command language
vacuumlo(1)
remove orphaned large objects from a PostgreSQL database
visprint(1), visprint-(1)
Fractal fingerprint generator
wcs-grab(1)
Try to interpret an existing WCS header
whirlwindwarp(6)
crazy moving stars
wmp(1)
warp mouse cursor
wndb(5), index.noun(5), data.noun(5), index.verb(5), data.verb(5), index.adj(5), data.adj(5), index.adv(5), data.adv(5)
WordNet database files noun.exc, verb.exc. adj.exc adv.exc - morphology exception lists sentidx.vrb, sents.vrb - files used by search code to display sentences illustrating the use of some specific verbs
x509_verify(3), x509_verify_ctx_new(3), x509_verify_ctx_free(3), x509_verify_ctx_set_max_depth(3), x509_verify_ctx_set_max_signatures(3), x509_verify_ctx_set_max_chains(3), x509_verify_ctx_set_purpose(3), x509_verify_ctx_set_intermediates(3), x509_verify_ctx_error_string(3), x509_verify_ctx_error_depth(3), x509_verify_ctx_chain(3)
discover and verify X.509 certificate chains
xcb_warp_pointer(3)
move mouse pointer
xo_set_syslog_enterprise_id(3)
Set the enterprise identifier for syslog content
xotclsh.nx(1), xotclsh(1)
Simple shell containing NSF/XOTcl2 interpreter
xowish.nx(1), xowish(1)
Simple windowing shell containing NSF/XOTcl2 interpreter
xprobe2(1)
A Remote active operating system fingerprinting tool
xzip(1)
X Interface to the Z-code Interpreter
y4munsharp(1)
Unsharp filter for YUV4MPEG2 streams
yaf(1)
dhcp fingerprinting
yara(1)
find files matching patterns and rules written in a special-purpose language
yorick(1)
interpreted language for numerical analysis and postprocessing
zerk(1)
All purpose GREIS fitting
zzuf(1)
multiple purpose fuzzer
Algorithm::CheckDigits::M11_012(3), CheckDigits::M11_012(3)
compute check digits for Bundeswehrpersonenkennnummer (DE)
Algorithm::Evolutionary::Op::Replace_Different(3)
Incorporate individuals into the population replacing the worst ones but only if they are different
Algorithm::Evolutionary::Op::Replace_Worst(3)
Incorporate individuals into the population replacing the worst ones
Algorithm::RabinKarp(3)
Rabin-Karp streaming hash
Algorithm::RabinKarp::Util(3)
utility methods for use with Rabin-Karp hash generation
Alien::Build::Interpolate(3)
Advanced interpolation engine for Alien builds
Alien::Build::Interpolate::Default(3)
Default interpolator for Alien::Build
AnyEvent::MPRPC(3)
Simple TCP-based MPRPC client/server
AnyEvent::MPRPC::Client(3)
Simple TCP-based MessagePack RPC client
AnyEvent::MPRPC::CondVar(3), AnyEvent::MPRPC::Lite::CondVar(3)
Condvar object used in AnyEvent::MPRPC::Lite::Server
AnyEvent::MPRPC::Server(3)
Simple TCP-based MessagePack RPC server
AnyEvent::RPC(3)
Abstract framework for Asyncronous RPC clients
AnyEvent::RPC::Enc::REST(3)
XML Encoder for AE::RPC
AnyEvent::RPC::Enc::YAML(3)
YAML Encoder for AE::RPC
Apache2::Status(3)
Embedded interpreter status information
Apache::JSONRPC(3), Apache::JSONRPC(3)
mod_perl-based JSON-RPC server
Apache::RPC::Server(3)
A subclass of RPC::XML::Server tuned for mod_perl
Apache::RPC::Status(3)
A status monitor similar to Apache::Status for RPC
Apache::XMLRPC(3)
serve XML-RPC requests from Apache
Apache::XMLRPC::Lite(3)
mod_perl-based XML-RPC server with minimum configuration
App::Info::Handler::Carp(3)
Use Carp to handle App::Info events
Astro::Catalog::Item::Morphology(3)
Information about a star's morphology
Astro::Coords::Interpolated(3)
Specify astronomical coordinates using two reference positions
Autodia::Handler::CSharp(3)
AutoDia handler for C#
BFD(3), BFD(3)
Impromptu dumping of data structures for debugging purposes
BNCFreq.pl(1)
Compute Information Content based on British National Corpus (World Edition)
BZ::Client::XMLRPC(3), BZ::Client::XMLRPC(3)
Performs XML-RPC calls on behalf of the client
Bigtop::TentMakerPath(3)
keeps track of where the tentmaker templates live
Bio::AlignIO::arp(3)
ARP MSA Sequence input/output stream
Bio::FeatureIO::interpro(3)
read features from InterPro XML
Bio::Graphics::Glyph::pairplot(3)
The "pairwise plot" glyph
Bio::Graphics::Glyph::whiskerplot(3)
The whiskerplot glyph
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Bio::Ontology::InterProTerm(3)
Implementation of InterProI term interface
Bio::OntologyIO::Handlers::InterProHandler(3)
XML handler class for InterProParser
Bio::OntologyIO::Handlers::InterPro_BioSQL_Handler(3)
parse an InterPro XML file and persist the resulting terms to a Biosql database
Bio::OntologyIO::InterProParser(3)
Parser for InterPro xml files
Bio::Phylo::Unparsers::Mrp(3)
Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Root::Utilities(3)
general-purpose utilities
Bio::SearchIO::erpin(3)
SearchIO-based ERPIN parser
Bio::SeqIO::interpro(3)
InterProScan XML input/output stream
Bio::Tools::Phylo::Gerp(3)
Parses output from GERP
Bio::Tools::Prints(3)
Parser for FingerPRINTScanII program
Bio::Tools::Run::ERPIN(3)
Wrapper for local execution of the ERPIN suite of programs
Bio::Tools::Run::Phylo::Gerp(3), Bio::Tools::Run::Gerp(3)
Wrapper for GERP
Bio::Tools::Run::StandAloneBlast(3)
Object for the local execution of the NCBI BLAST program suite (blastall, blastpgp, bl2seq). There is experimental support for WU-Blast and NCBI rpsblast
Bio::Tools::Run::StandAloneNCBIBlast(3)
Object for the local execution of the NCBI BLAST program suite (blastall, blastpgp, bl2seq). With experimental support for NCBI rpsblast
Blog::Spam::Server(3)
An RPC server which detects comment spam
Bundle::PlRPC(3)
A bundle to install PlRPC-Server, Client and prerequisites
CGI::Carp(3)
CGI routines for writing to the HTTPD (or other) error log
CGI::Ex::Die(3)
A CGI::Carp::FatalsToBrowser type utility
CGI::FastTemplate(3)
Perl extension for managing templates, and performing variable interpolation
CHI::Driver::FastMmap(3)
Persistent interprocess cache via mmap'ed files
CPAN::HandleConfig(3)
internal configuration handling for CPAN.pm n .SS """CLASS->safe_quote ITEM""" .SS "CLASS->safe_quote ITEM" Subsection "CLASS->safe_quote ITEM" Quotes an item to become safe against spaces in shell interpolation. An item is enclosed in double quotes if: - the item contains spaces in the middle - the item does not start with a quote This happens to avoid shell interpolation problems when whitespace is present in directory names. This method uses commands_quote to determine the correct quote. If commands_quote is a space, no quoting will take place. if it starts and ends with the same quote character: leave it as it is if it contains no whitespace: leave it as it is if it contains whitespace, then if it contains quotes: better leave it as it is else: quote it with the correct quote type for the box we're on
Cache::FastMmap(3)
Uses an mmap'ed file to act as a shared memory interprocess cache
Carp(3)
alternative warn and die for modules
Carp::Always(3)
Warns and dies noisily with stack backtraces
Carp::Always::Color(3)
Carp::Always, but with color
Carp::Always::Color::HTML(3)
Carp::Always, but with HTML color
Carp::Always::Color::Term(3)
Carp::Always, but with terminal color
Carp::Assert(3)
executable comments
Carp::Assert::More(3)
convenience wrappers around Carp::Assert
Carp::Clan(3)
Report errors from perspective of caller of a "clan" of modules
Carp::Clan::Share(3)
Share your Carp::Clan settings with your whole Clan
Carp::Datum(3)
Debugging And Tracing Ultimate Module
Carp::Datum::Assert(3)
Assertion expression extractor
Carp::Datum::Cfg(3)
Dynamic Debug Configuration Setting for Datum
Carp::Datum::Flags(3)
Flag Constants
Carp::Datum::MakeMaker(3)
Offer to strip Carp::Datum calls statically
Carp::Datum::Strip(3)
strips most Carp::Datum calls lexically
Carp::REPL(3)
read-eval-print-loop on die and/or warn
Catalyst::Action::SOAP::RPCEncoded(3)
RPC Encoded service
Catalyst::Action::SOAP::RPCEndpoint(3)
RPC Dispatcher
Catalyst::Action::SOAP::RPCLiteral(3)
RPC style Literal encoding service
Catalyst::Action::XMLRPC(3)
XMLRPC Action Class
Catalyst::Controller::SOAP::RPC(3)
Helper controller for SOAP
Catalyst::Plugin::Server(3)
Base Server plugin for RPC-able protocols
Catalyst::Plugin::Server::XMLRPC(3)
-- Catalyst XMLRPC Server Plugin
Catalyst::Plugin::Server::XMLRPC::DispatchType::XMLRPCPath(3)
XMLRPCPath DispatchType
Catalyst::Plugin::Server::XMLRPC::DispatchType::XMLRPCRegex(3)
XMLRPCRegex DispatchType
Catalyst::Plugin::Server::XMLRPC::Tutorial(3)
-- Using Catalyst as XMLRPC Server
Catalyst::Plugin::XMLRPC(3)
DEPRECATED Dispatch XMLRPC methods with Catalyst
Catalyst::Plugin::XMLRPC::DispatchType::XMLRPC(3)
XMLRPC DispatchType
Chemistry::Mok(3)
molecular awk interpreter
Config::General::Interpolated(3)
Parse variables within Config files
Config::INI::Simple(3)
provides quick access to the contents of .ini files Only dependency is File::Slurp
Config::Model::Role::WarpMaster(3)
register and trigger a warped element
Config::Model::WarpedNode(3)
Node that change config class properties
Config::Model::Warper(3)
Warp tree properties
Crypt::Cipher::SAFERP(3)
Symmetric cipher SAFER+, key size: 128/192/256 bits
Crypt::Cipher::Serpent(3)
Symmetric cipher Serpent, key size: 128/192/256 bits
Crypt::LE::Challenge::Simple(3)
A boilerplate for extending Crypt::LE and Crypt::LE client application (le.pl) with challenge/verification handlers
Crypt::LE::Complete::Simple(3)
A boilerplate for extending Crypt::LE client application (le.pl) with completion handlers
Crypt::Serpent(3)
Crypt::CBC compliant Serpent block cipher encryption module
DBD::PgLite::MirrorPgToSQLite(3)
Mirror tables from PostgreSQL to SQLite
DBIx::Class::Carp(3)
Provides advanced Carp::Clan-like warning functions for DBIx::Class internals
DBIx::Class::Helper::Row::ToJSON(3)
Remove the boilerplate from your TO_JSON functions
DBIx::Interp(3)
Interpolate Perl variables into SQL with DBI
Dancer::Plugin::RPC(3)
Configure endpoints for XMLRPC, JSONRPC and RESTRPC procedures
Dancer::Plugin::RPC::JSONRPC(3)
Dancer Plugin to register jsonrpc2 methods
Dancer::Plugin::RPC::RESTRPC(3)
RESTRPC Plugin for Dancer
Dancer::Plugin::RPC::XMLRPC(3)
XMLRPC Plugin for Dancer
Dancer::RPCPlugin::CallbackResult(3)
Factory for generating Callback-results
Dancer::RPCPlugin::DefaultRoute(3)
Catch bad-requests and send error-response
Dancer::RPCPlugin::DispatchFromConfig(3)
Build dispatch-table from the Dancer Config
Dancer::RPCPlugin::DispatchFromPod(3)
Build dispatch-table from POD
Dancer::RPCPlugin::DispatchItem(3)
Small object to handle dispatch-table items
Dancer::RPCPlugin::DispatchMethodList(3)
Class for maintaining a global methodlist
Dancer::RPCPlugin::ErrorResponse(3)
Interface to pass error-responses without knowlage of the protocol
Dancer::RPCPlugin::FlattenData(3), Dancer::RPCPlugin::DataFlatten(3)
Simple routine to flatten (blessed) data
Dancer::RPCPlugin::PluginNames(3)
Register Dancer::Plugin::RPC plugin-names
Data::AMF::Remoting(3)
handle Flash/Flex RPC
Data::Clone(3)
Polymorphic data cloning
Data::Stag::SxprParser(3), SxprParser.pm (3)
parses Stag S-expression format
Data::Unixish::centerpad(3)
Center text to a certain column width
Data::Unixish::rpad(3)
Pad text to the right until a certain column width
Date::ICal::Duration(3)
durations in iCalendar format, for math purposes
DateTime::Format::Builder::Parser::Strptime(3)
strptime based date parsing
DateTime::Format::Strptime(3)
Parse and format strp and strf time patterns
DateTime::Format::Strptime::Types(3)
Types used for parameter checking in DateTime::Format::Strptime
Devel::Callsite(3)
Get caller return OP address and Perl interpreter context
Devel::Cover::Dumper(3)
Internal module for debugging purposes
Devel::InnerPackage(3)
find all the inner packages of a package
Devel::REPL::Plugin::Carp::REPL(3)
Devel::REPL plugin for Carp::REPL
Digest::BubbleBabble(3)
Create bubble-babble fingerprints
DtEditorPasteFromClipboard(3)
insert the clipboard selection into a DtEditor widget
DtInfoShowTopic(3)
provide the user access to a local information corpus at a specific location
Event::RPC(3)
Event based transparent Client/Server RPC framework
Event::RPC::Client(3)
Client API to connect to Event::RPC Servers
Event::RPC::Connection(3)
Represents a RPC connection
Event::RPC::LogConnection(3)
Represents a logging connection
Event::RPC::Logger(3)
Logging facility for Event::RPC
Event::RPC::Loop(3)
Mainloop Abstraction layer for Event::RPC
Event::RPC::Loop::AnyEvent(3)
AnyEvent mainloop for Event::RPC
Event::RPC::Loop::Event(3)
Event mainloop for Event::RPC
Event::RPC::Loop::Glib(3)
Glib mainloop for Event::RPC
Event::RPC::Message(3)
Implementation of Event::RPC network protocol
Event::RPC::Server(3)
Simple API for event driven RPC servers
Event::tcpsession(3)
reliable bidirectional RPC session layer
File::Slurp(3)
Simple and Efficient Reading/Writing/Modifying of Complete Files
File::Slurp::Tiny(3)
A simple, sane and efficient file slurper [DISCOURAGED]
File::Slurp::Tree(3)
slurp and emit file trees as nested hashes
File::Slurp::WithinPolicy(3)
Applies filesystem policies to File::Slurp
File::Slurper(3)
A simple, sane and efficient module to slurp a file
Finance::Bitcoin::API(3)
wrapper for the Bitcoin JSON-RPC API
Font::TTF::Mort(3)
Glyph Metamorphosis table in a font
Font::TTF::OldMort(3)
Glyph Metamorphosis table in a font
Frontier::Client(3)
issue Frontier XML RPC requests to a server
Frontier::Daemon(3)
receive Frontier XML RPC requests
Frontier::RPC2(3)
encode/decode RPC2 format XML
Frontier::Responder(3)
Create XML-RPC listeners for normal CGI processes
Function::Fallback::CoreOrPP(3)
Functions that use non-core XS module but provide pure-Perl/core fallback
Gantry::Plugins::SOAP::RPC(3)
RPC style SOAP support
Gantry::Utils::Model(3)
a general purpose Object Relational Model base class
GeoIP2::Model::Enterprise(3)
Model class for GeoIP2 Enterprise
Getopt::ArgvFile(3)
interpolates script options from files into @ARGV or another array
Glib::Signal(3)
Object customization and general purpose notification
GnuPG::Fingerprint(3)
GnuPG Fingerprint Objects
Google::Chart::Type::ScatterPlot(3)
Google::Chart ScatterPlot Type
Gtk2::CellRendererPixbuf(3)
wrapper for GtkCellRendererPixbuf
Gtk2::CellRendererProgress(3)
wrapper for GtkCellRendererProgress
Gtk2::ImageView(3)
General purpose image viewer for Gtk+
HTML::Chunks::Super(3)
Chunks with superpowers
HTML::Entities::Interpolate(3)
Call HTML::Entities::encode_entities, via a hash, within a string
HTML::Mason::Interp(3)
Mason Component Interpreter
HTTP::HeaderParser::XS(3)
an XS extension for processing HTTP headers
IPC::PubSub(3)
Interprocess Publish/Subscribe channels
Interpolation(3)
Arbitrary string interpolation semantics (using tie()) Version 0.74 Originaly by Mark-Jason Dominus (mjd-perl-interpolation@plover.com) Since version 0.66 maintained by Jenda@Krynicky.cz
Iterator(3)
A general-purpose iterator class
JSON::RPC(3)
JSON RPC 2.0 Server Implementation
JSON::RPC(3)
Perl implementation of JSON-RPC 1.1 protocol
JSON::RPC::Common(3)
Transport agnostic JSON RPC helper objects
JSON::RPC::Common::Marshal::HTTP(3)
Convert HTTP::Request and HTTP::Response to/from JSON::RPC::Common calls and returns
JSON::RPC::Common::Marshal::Text(3)
JSON text marshalling for JSON::RPC::Common
JSON::RPC::Common::Message(3)
JSON-RPC message role
JSON::RPC::Common::Procedure::Call(3)
JSON RPC Procedure Call base class
JSON::RPC::Common::Procedure::Call::Version_1_0(3)
JSON-RPC 1.0 request
JSON::RPC::Common::Procedure::Call::Version_1_1(3)
JSON-RPC 1.1 Procedure Call
JSON::RPC::Common::Procedure::Call::Version_2_0(3)
JSON-RPC 2.0 Procedure Call
JSON::RPC::Common::Procedure::Return(3)
JSON-RPC procedure return class
JSON::RPC::Common::Procedure::Return::Error(3)
Base class for JSON-RPC errors
JSON::RPC::Common::Procedure::Return::Version_1_0(3)
JSON-RPC 1.0 error class
JSON::RPC::Common::Procedure::Return::Version_1_0::Error(3)
JSON-RPC 1.0 error class
JSON::RPC::Common::Procedure::Return::Version_1_1(3)
JSON-RPC 1.1 Procedure Return
JSON::RPC::Common::Procedure::Return::Version_1_1::Error(3)
JSON-RPC 1.1 error class
JSON::RPC::Common::Procedure::Return::Version_2_0(3)
JSON-RPC 2.0 Procedure Return
JSON::RPC::Common::Procedure::Return::Version_2_0::Error(3)
JSON-RPC 2.0 error class
JSON::RPC::Common::TypeConstraints(3)
Type constraint library
JSON::RPC::Constants(3)
Constants
JSON::RPC::Dispatch(3)
Dispatch JSON RPC Requests To Handlers
JSON::RPC::Dispatcher(3)
A JSON-RPC 2.0 server
JSON::RPC::Dispatcher::App(3)
A base class for creating object oriented apps with JRD
JSON::RPC::Dispatcher::Procedure(3)
The data holder between RPC requests and responses
JSON::RPC::Legacy::Client(3)
Perl implementation of JSON-RPC client
JSON::RPC::Legacy::Procedure(3)
JSON-RPC Service attributes
JSON::RPC::Legacy::Server(3), JSON::RPC::Server(3)
Perl implementation of JSON-RPC sever
JSON::RPC::Legacy::Server::Apache2(3)
JSON-RPC sever for mod_perl2
JSON::RPC::Legacy::Server::CGI(3)
JSON-RPC sever for CGI
JSON::RPC::Legacy::Server::Daemon(3)
JSON-RPC sever for daemon
JSON::RPC::Parser(3)
Parse JSON RPC Requests from Plack::Request
JSON::RPC::Procedure(3)
A JSON::RPC Procedure
JSON::RPC::Test(3)
Simple Wrapper To Test Your JSON::RPC
JSONRPC(3), JSONRPC(3)
Perl implementation of JSON-RPC protocol
JavaScript::RPC(3)
(DEPRECATED) Remote procedure calls from JavaScript
JavaScript::RPC::Server::CGI(3)
Remote procedure calls from JavaScript
JavaScript::Value::Escape(3)
Avoid XSS with JavaScript value interpolation
Jifty::Plugin::RPC(3)
Use AMQP for RPC
KinoSearch1::Highlight::Encoder(3)
encode excerpted text
KinoSearch1::Highlight::Formatter(3)
format highlighted bits within excerpts
KinoSearch1::Highlight::Highlighter(3)
create and highlight excerpts
List::Flatten(3)
Interpolate array references in a list
Locale::Maketext::Fuzzy(3)
Maketext from already interpolated strings
Log::Agent::Driver::Datum(3)
interceptor driver to cooperate with Carp::Datum
MDOM::Token::Interpolation(3)
A Interpolation Token node for Makefile DOM
MPI_Put(3), MPI_Rput(3)
Copies data from the origin memory to the target
Mail::DKIM::SignerPolicy(3)
determines signing parameters for a message
Mail::Verp(3)
encodes and decodes Variable Envelope Return Paths (VERP) addresses
Marpa::Advanced::Algorithm(3)
The Marpa Algorithm
Marpa::Advanced::Bibliography(3)
A Marpa Bibliography
Marpa::Advanced::Implementation(3)
Marpa Implementation
Marpa::Advanced::Models(3)
Other Input Models
Marpa::Deprecated::Bocage(3)
DEPRECATED: Marpa's Bocage Data Structure
Marpa::Deprecated::Evaluator(3)
a DEPRECATED Evaluator
Marpa::Deprecated::Implementation(3)
DEPRECATED Obsoleted Marpa Implementation
Marpa::Grammar(3)
Marpa Grammar Objects
Marpa::HTML(3)
High-level HTML Parser
Marpa::HTML::Support(3)
Marpa::HTML Support, and How to Report Bugs
Marpa::Marpa(3), Marpa(3)
Parse any Language You Can Describe in BNF
Marpa::PP(3)
Pure Perl version of Marpa
Marpa::PP::Advanced::Bibliography(3)
A Marpa Bibliography
Marpa::PP::Advanced::Models(3)
Other Input Models
Marpa::PP::Debug(3)
Marpa Grammar Debugging
Marpa::PP::Grammar(3)
Marpa Grammar Objects
Marpa::PP::Recognizer(3)
Marpa Recognizer Objects
Marpa::PP::Rewrite(3)
How Marpa Rewrites Grammars
Marpa::PP::Semantics(3)
How Marpa Evaluates Parses
Marpa::PP::Semantics::Infinite(3)
How Marpa Deals with Infinite Cycles
Marpa::PP::Semantics::Null(3)
How Marpa Evaluates Null Rules and Symbols
Marpa::PP::Semantics::Order(3)
How Marpa Ranks Ambiguous Parses
Marpa::PP::Support(3)
Marpa::PP Support, and How to Report Bugs
Marpa::PP::Tracing(3)
Tracing Your Grammar
Marpa::PP::Vocabulary(3)
Standard Parsing Terms as Used within Marpa
Marpa::Parse_Terms(3)
Standard Parsing Terms used in the Marpa Documents
Marpa::Recognizer(3)
Marpa Recognizer Objects
Marpa::Semantics(3)
How Marpa Evaluates Parses
Marpa::Support(3)
Marpa Support, and How to Report Bugs
Marpa::Tracing(3)
Tracing Your Grammar
Marpa::XS(3)
XS version of Marpa
Marpa::XS::Advanced::Bibliography(3)
A Marpa Bibliography
Marpa::XS::Advanced::Models(3)
Other Input Models
Marpa::XS::Debug(3)
Debugging your Marpa grammar
Marpa::XS::Grammar(3)
Marpa grammars
Marpa::XS::Recognizer(3)
Marpa recognizers
Marpa::XS::Rewrite(3)
How Marpa rewrites grammars
Marpa::XS::Semantics(3)
How Marpa evaluates parses
Marpa::XS::Semantics::Infinite(3)
How Marpa Deals with Infinite Cycles
Marpa::XS::Semantics::Null(3)
How Marpa Evaluates Null Rules and Symbols
Marpa::XS::Semantics::Order(3)
How Marpa ranks ambiguous parses
Marpa::XS::Support(3)
Marpa::XS Support, and how to report bugs
Marpa::XS::Tracing(3)
Tracing your Marpa grammar
Marpa::XS::Vocabulary(3)
Standard parsing terms as used within Marpa
Mason::Interp(3)
Mason Interpreter
MasonX::Interp::WithCallbacks(3)
Mason callback support via Params::CallbackRequest
Math::GSL::Interp(3)
Interpolation
Math::Interpolate(3)
Interpolate the value Y from X using a list of (X, Y) pairs
Math::RPN(3)
Perl extension for Reverse Polish Math Expression Evaluation
Math::Spline(3), Math::Spline (3)
Cubic Spline Interpolation of data
Math::Symbolic::Custom::ErrorPropagation(3)
Calculate Gaussian Error Propagation
MojoMojo::Controller::Jsrpc(3)
Various JSRPC functions
MojoMojo::Formatter::Markdown(3)
MultiMarkdown formatting for your content. MultiMarkdown is an extension of Markdown, adding support for tables, footnotes, bibliography, automatic cross-references, glossaries, appendices, definition lists, math syntax, anchor and image attributes, and document metadata. Markdown syntax: <http://daringfireball.net/projects/markdown/syntax> MultiMarkdown syntax: <http://fletcherpenney.net/multimarkdown/users_guide/multimarkdown_syntax_guide/>
MojoMojo::Formatter::Wiki(3)
Handle interpage linking
Moose::Cookbook::Meta::PrivateOrPublic_MethodMetaclass(3)
A method metaclass for marking methods public or private
MooseX::Async(3)
The Orphanange of Asynchronous Love Children
Net::ARP(3), ARP(3)
Perl extension for creating ARP packets
Net::Amazon::S3::Error::Handler::Confess(3)
An internal class to report errors via Carp::confess
Net::BitTorrent::PeerPacket(3), Net::BitTorrent::PeerPacket(3)
Parse/Build Peer Packets from BitTorrent
Net::Blogger(3)
(DEPRECATED) an OOP-ish interface for accessing a weblog via the Blogger XML-RPC API
Net::Blogger::Engine::Movabletype::mt(3), mt(3)
Adds support for the MovableType XML-RPC API
Net::DNS::RR::RP(3)
DNS RP resource record
Net::DNS::ToolKit::RR::RP(3)
Resource Record Handler
Net::DRI::Protocol::RRP(3)
RRP 1.1/2.0 Protocol for Net::DRI
Net::DRI::Protocol::RRP::Connection(3)
RRP Connection handling for Net::DRI
Net::DRI::Protocol::RRP::Core::Domain(3)
RRP Domain commands for Net::DRI
Net::DRI::Protocol::RRP::Core::Host(3)
RRP Host commands for Net::DRI
Net::DRI::Protocol::RRP::Core::Session(3)
RRP Session commands for Net::DRI
Net::DRI::Protocol::RRP::Core::Status(3)
RRP Status for Net::DRI
Net::DRI::Protocol::RRP::Message(3)
RRP Message for Net::DRI
Net::DRI::Transport::HTTP::XMLRPCLite(3)
XML-RPC Transport for Net::DRI
Net::Frame::Layer::ARP(3)
Address Resolution Protocol layer object
Net::Frame::Layer::ICMPv6::ParameterProblem(3)
ICMPv6 ParameterProblem type object
Net::Libdnet::Arp(3)
high level API to access libdnet arp_* functions
Net::Nessus::XMLRPC(3)
Communicate with Nessus scanner(v4.2+) via XMLRPC
Net::Packet::ARP(3)
Address Resolution Protocol layer 3 object
Net::SSL::GetServerProperties(3), Net::SSL::GetServerProperties(3)
get properties from SSL/TLS servers
Net::SinFP(3)
a full operating system stack fingerprinting suite
Net::SinFP::Result(3)
contains all information about matched fingerprint
Net::SinFP::SinFP4(3)
IPv4 operating system fingerprinting
Net::SinFP::SinFP6(3)
IPv6 operating system fingerprinting
Net::Whois::Object(3)
Object encapsulating RPSL data returned by Whois queries
Net::Whois::Object::AsBlock(3)
an object representation of the RPSL AsBlock block
Net::Whois::Object::AsBlock::AFRINIC(3)
an object representation of the RPSL AsBlock block
Net::Whois::Object::AsBlock::APNIC(3)
an object representation of the RPSL AsBlock block
Net::Whois::Object::AsSet(3)
an object representation of a RPSL AsSet block
Net::Whois::Object::AsSet::AFRINIC(3)
an object representation of a RPSL AsSet block
Net::Whois::Object::AsSet::APNIC(3)
an object representation of a RPSL AsSet block
Net::Whois::Object::AutNum(3)
an object representation of a RPSL AutNum block
Net::Whois::Object::AutNum::AFRINIC(3)
an object representation of a RPSL AutNum block
Net::Whois::Object::AutNum::APNIC(3)
an object representation of a RPSL AutNum block
Net::Whois::Object::Domain(3)
an object representation of a RPSL Domain block
Net::Whois::Object::Domain::AFRINIC(3)
an object representation of a RPSL Domain block
Net::Whois::Object::Domain::APNIC(3)
an object representation of a RPSL Domain block
Net::Whois::Object::FilterSet(3)
an object representation of a RPSL FilterSet block
Net::Whois::Object::FilterSet::AFRINIC(3)
an object representation of a RPSL FilterSet block
Net::Whois::Object::FilterSet::APNIC(3)
an object representation of a RPSL FilterSet block
Net::Whois::Object::Inet6Num(3)
an object representation of a RPSL Inet6Num block
Net::Whois::Object::Inet6Num::AFRINIC(3)
an object representation of a RPSL Inet6Num block
Net::Whois::Object::Inet6Num::APNIC(3)
an object representation of a RPSL Inet6Num block
Net::Whois::Object::InetNum(3)
an object representation of a RPSL InetNum block
Net::Whois::Object::InetNum::AFRINIC(3)
an object representation of a RPSL InetNum block
Net::Whois::Object::InetNum::APNIC(3)
an object representation of a RPSL InetNum block
Net::Whois::Object::InetRtr(3)
an object representation of a RPSL InetRtr block
Net::Whois::Object::InetRtr::AFRINIC(3)
an object representation of a RPSL InetRtr block
Net::Whois::Object::Information(3)
an object representation of the RPSL Information block
Net::Whois::Object::Irt(3)
an object representation of the RPSL Irt block
Net::Whois::Object::Irt::AFRINIC(3)
an object representation of the RPSL Irt block
Net::Whois::Object::Irt::APNIC(3)
an object representation of the RPSL Irt block
Net::Whois::Object::KeyCert(3)
an object representation of the RPSL KeyCert block
Net::Whois::Object::KeyCert::AFRINIC(3)
an object representation of the RPSL KeyCert block
Net::Whois::Object::KeyCert::APNIC(3)
an object representation of the RPSL KeyCert block
Net::Whois::Object::Limerick(3)
an object representation of the RPSL Limerick block
Net::Whois::Object::Limerick::AFRINIC(3)
an object representation of the RPSL Limerick block
Net::Whois::Object::Mntner(3)
an object representation of the RPSL Mntner block
Net::Whois::Object::Mntner::AFRINIC(3)
an object representation of the RPSL Mntner block
Net::Whois::Object::Mntner::APNIC(3)
an object representation of the RPSL Mntner block
Net::Whois::Object::Organisation(3)
an object representation of the RPSL Organisation block
Net::Whois::Object::PeeringSet(3)
an object representation of the RPSL PeeringSet block
Net::Whois::Object::PeeringSet::AFRINIC(3)
an object representation of the RPSL PeeringSet block
Net::Whois::Object::PeeringSet::APNIC(3)
an object representation of the RPSL PeeringSet block
Net::Whois::Object::Person(3)
an object representation of the RPSL Person block
Net::Whois::Object::Person::AFRINIC(3)
an object representation of the RPSL Person block
Net::Whois::Object::Person::APNIC(3)
an object representation of the RPSL Person block
Net::Whois::Object::Poem(3)
an object representation of the RPSL Poem block
Net::Whois::Object::Poem::APNIC(3)
an object representation of the RPSL Poem block
Net::Whois::Object::PoeticForm(3)
an object representation of the RPSL PoeticForm block
Net::Whois::Object::PoeticForm::APNIC(3)
an object representation of the RPSL PoeticForm block
Net::Whois::Object::Response(3)
an object representation of the RPSL Response block
Net::Whois::Object::Role(3)
an object representation of the RPSL Role block
Net::Whois::Object::Role::AFRINIC(3)
an object representation of the RPSL Role block
Net::Whois::Object::Role::APNIC(3)
an object representation of the RPSL Role block
Net::Whois::Object::Route(3)
an object representation of the RPSL Route block
Net::Whois::Object::Route6(3)
an object representation of the RPSL Route6 block
Net::Whois::Object::Route6::AFRINIC(3)
an object representation of the RPSL Route6 block
Net::Whois::Object::Route6::APNIC(3)
an object representation of the RPSL Route6 block
Net::Whois::Object::Route::AFRINIC(3)
an object representation of the RPSL Route block
Net::Whois::Object::Route::APNIC(3)
an object representation of the RPSL Route block
Net::Whois::Object::RouteSet(3)
an object representation of the RPSL RouteSet block
Net::Whois::Object::RouteSet::AFRINIC(3)
an object representation of the RPSL RouteSet block
Net::Whois::Object::RouteSet::APNIC(3)
an object representation of the RPSL RouteSet block
Net::Whois::Object::RtrSet(3)
an object representation of the RPSL RtrSet block
Net::Whois::Object::RtrSet::AFRINIC(3)
an object representation of the RPSL RtrSet block
Net::Whois::Object::RtrSet::APNIC(3)
an object representation of the RPSL RtrSet block
NetPacket::ARP(3)
Assemble and disassemble ARP (Address Resolution Protocol) packets
Nmap::Scanner::OS::Fingerprint(3), Fingerprint(3)
Nmap fingerprint for OS
Ocsinventory::Agent::Common(3)
give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
OpenXPKI::Server::Workflow::Activity::User::HashUserPassword(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::User::HashUserPassword
PDF::API3::Compat::API2::Basic::TTF::Mort(3)
Glyph Metamorphosis table in a font
PDF::API3::Compat::API2::Basic::TTF::OldMort(3)
Glyph Metamorphosis table in a font
PDL::Func(3)
interpolation, integration, & gradient estimation (differentiation) of functions
PDL::Graphics::Limits(3)
derive limits for display purposes
PDL::Transform(3)
Coordinate transforms, image warping, and N-D functions
POE::Component::Server::HTTPServer::ParameterParseHandler(3)
Parse request parameters into context
POE::Component::Server::XMLRPC(3)
publish POE event handlers via XMLRPC over HTTP
POSIX::strptime(3)
Perl extension to the POSIX date parsing strptime(3) function
PPI::Token::Quote::Interpolate(3)
The interpolation quote-like operator
PPIx::QuoteLike::Token::Interpolation(3)
Represent an interpolation
PPIx::QuoteLike::Token::String(3)
Represent an uninterpolated string
PPIx::Regexp::Token::Interpolation(3)
Represent an interpolation in the PPIx::Regexp package
PTAInterpolate(1)
Interpolate intermediate images between stereo photos
Parse::ErrorString::Perl(3)
Parse error messages from the perl interpreter
Paws::ECS::DiscoverPollEndpoint(3)
Arguments for method DiscoverPollEndpoint on Paws::ECS
Paws::ELB::CreateLoadBalancerPolicy(3)
Arguments for method CreateLoadBalancerPolicy on Paws::ELB
Paws::ELB::DeleteLoadBalancerPolicy(3)
Arguments for method DeleteLoadBalancerPolicy on Paws::ELB
Paws::ELB::DescribeLoadBalancerPolicies(3)
Arguments for method DescribeLoadBalancerPolicies on Paws::ELB
Paws::ELB::DescribeLoadBalancerPolicyTypes(3)
Arguments for method DescribeLoadBalancerPolicyTypes on Paws::ELB
Paws::ELB::SetLoadBalancerPoliciesForBackendServer(3)
Arguments for method SetLoadBalancerPoliciesForBackendServer on Paws::ELB
Paws::ELB::SetLoadBalancerPoliciesOfListener(3)
Arguments for method SetLoadBalancerPoliciesOfListener on Paws::ELB
Paws::IAM::AttachUserPolicy(3)
Arguments for method AttachUserPolicy on Paws::IAM
Paws::IAM::DeleteUserPolicy(3)
Arguments for method DeleteUserPolicy on Paws::IAM
Paws::IAM::DetachUserPolicy(3)
Arguments for method DetachUserPolicy on Paws::IAM
Paws::IAM::GetUserPolicy(3)
Arguments for method GetUserPolicy on Paws::IAM
Paws::IAM::ListAttachedUserPolicies(3)
Arguments for method ListAttachedUserPolicies on Paws::IAM
Paws::IAM::ListEntitiesForPolicy(3)
Arguments for method ListEntitiesForPolicy on Paws::IAM
Paws::IAM::ListUserPolicies(3)
Arguments for method ListUserPolicies on Paws::IAM
Paws::IAM::PutUserPolicy(3)
Arguments for method PutUserPolicy on Paws::IAM
Paws::OpsWorks::CreateUserProfile(3)
Arguments for method CreateUserProfile on Paws::OpsWorks
Paws::OpsWorks::DeleteUserProfile(3)
Arguments for method DeleteUserProfile on Paws::OpsWorks
Paws::OpsWorks::DescribeMyUserProfile(3)
Arguments for method DescribeMyUserProfile on Paws::OpsWorks
Paws::OpsWorks::DescribeUserProfiles(3)
Arguments for method DescribeUserProfiles on Paws::OpsWorks
Paws::OpsWorks::UpdateMyUserProfile(3)
Arguments for method UpdateMyUserProfile on Paws::OpsWorks
Paws::OpsWorks::UpdateUserProfile(3)
Arguments for method UpdateUserProfile on Paws::OpsWorks
Paws::RDS::CreateDBClusterParameterGroup(3)
Arguments for method CreateDBClusterParameterGroup on Paws::RDS
Paws::RDS::DeleteDBClusterParameterGroup(3)
Arguments for method DeleteDBClusterParameterGroup on Paws::RDS
Paws::RDS::DescribeDBClusterParameterGroups(3)
Arguments for method DescribeDBClusterParameterGroups on Paws::RDS
Paws::RDS::DescribeDBClusterParameters(3)
Arguments for method DescribeDBClusterParameters on Paws::RDS
Paws::RDS::DescribeEngineDefaultClusterParameters(3)
Arguments for method DescribeEngineDefaultClusterParameters on Paws::RDS
Paws::RDS::ModifyDBClusterParameterGroup(3)
Arguments for method ModifyDBClusterParameterGroup on Paws::RDS
Paws::RDS::ResetDBClusterParameterGroup(3)
Arguments for method ResetDBClusterParameterGroup on Paws::RDS
Paws::RedShift::CreateClusterParameterGroup(3)
Arguments for method CreateClusterParameterGroup on Paws::RedShift
Paws::RedShift::DeleteClusterParameterGroup(3)
Arguments for method DeleteClusterParameterGroup on Paws::RedShift
Paws::RedShift::DescribeClusterParameterGroups(3)
Arguments for method DescribeClusterParameterGroups on Paws::RedShift
Paws::RedShift::DescribeClusterParameters(3)
Arguments for method DescribeClusterParameters on Paws::RedShift
Paws::RedShift::DescribeDefaultClusterParameters(3)
Arguments for method DescribeDefaultClusterParameters on Paws::RedShift
Paws::RedShift::ModifyClusterParameterGroup(3)
Arguments for method ModifyClusterParameterGroup on Paws::RedShift
Paws::RedShift::ResetClusterParameterGroup(3)
Arguments for method ResetClusterParameterGroup on Paws::RedShift
Perl6::Slurp(3)
Implements the Perl 6 'slurp' built-in
Perl::Critic::Policy::Bangs::ProhibitRefProtoOrProto(3)
Create a "clone()" method if you need copies of objects
Perl::Critic::Policy::ErrorHandling::RequireCarping(3)
Use functions from Carp instead of "warn" or "die"
Perl::Critic::Policy::ValuesAndExpressions::ProhibitInterpolationOfLiterals(3)
Always use single quotes for literal strings
Perl::Critic::Policy::ValuesAndExpressions::RequireInterpolationOfMetachars(3)
Warns that you might have used single quotes when you really wanted double-quotes
Perl::Critic::UserProfile(3)
The contents of the user's profile, often .perlcriticrc
Plack::Middleware::ExtDirect(3)
RPC::ExtDirect gateway for Plack
Plack::Middleware::SocketIO::XHRPolling(3)
XHRPolling transport
Plagger::Plugin::Filter::FeedBurnerPermalink(3)
Fix FeedBurner's permalink
Plagger::Plugin::Notify::UpdatePing(3)
Notify updates via XMLRPC update ping
Plagger::Plugin::Summary::GetSen(3)
Use GetSen XML-RPC API to extract summary from Japanese text
PocketIO::Transport::XHRPolling(3)
XHRPolling transport
Proc::WaitStat(3)
Interpret and act on wait() status values
Protocol::XMLRPC(3)
XML-RPC implementation
Protocol::XMLRPC::Client(3)
Simple XML-RPC client
Protocol::XMLRPC::Method(3)
methodCall and methodResponse base class
Protocol::XMLRPC::MethodCall(3)
XML-RPC methodCall request
Protocol::XMLRPC::MethodResponse(3)
XML-RPC methodResponse response
Protocol::XMLRPC::Value(3)
a base class for scalar values
Protocol::XMLRPC::Value::Array(3)
XML-RPC array
Protocol::XMLRPC::Value::Base64(3)
XML-RPC array
Protocol::XMLRPC::Value::Boolean(3)
XML-RPC array
Protocol::XMLRPC::Value::DateTime(3)
XML-RPC array
Protocol::XMLRPC::Value::Double(3)
XML-RPC array
Protocol::XMLRPC::Value::Integer(3)
XML-RPC array
Protocol::XMLRPC::Value::String(3)
XML-RPC array
Protocol::XMLRPC::Value::Struct(3)
XML-RPC struct
Protocol::XMLRPC::ValueFactory(3)
value objects factory
Pugs::Runtime::StrPos(3)
Represent a position inside a string
Quantum::Superpositions(3)
QM-like superpositions in Perl
RDF::Trine::Graph(3)
Materialized RDF Graphs for testing isomorphism
RDFStore::Parser::SiRPAC(3)
This module implements a streaming RDF Parser as a direct implementation of XML::Parser::Expat(3)
RDFStore::Parser::Styles::RDFStore::Model(3)
This module is a RDFStore::Parser::SiRPAC(3) filter to ingest records into an RDFStore::Model(3)
RDFStore::Parser::Styles::RDFStore::Statement(3)
This module is a RDFStore::Parser::SiRPAC(3) filter to generate RDFStore::Statements
RPC::EPC::Service(3)
An Asynchronous Remote Procedure Stack
RPC::ExtDirect(3)
Easily integrate Perl server code with JavaScript apps
RPC::ExtDirect::API(3)
Ext.Direct service discovery handler
RPC::ExtDirect::API::Action(3)
Ext.Direct Action object
RPC::ExtDirect::API::Hook(3)
Ext.Direct Method wrappers
RPC::ExtDirect::API::Method(3)
Ext.Direct Method object
RPC::ExtDirect::Config(3)
Centralized configuration handling for RPC::ExtDirect
RPC::ExtDirect::Demo::PollProvider(3)
Ext.Direct polling provider demo
RPC::ExtDirect::Demo::Profile(3)
Part of Ext.Direct interface demo
RPC::ExtDirect::Demo::TestAction(3)
Part of Ext.Direct interface demo
RPC::ExtDirect::Event(3)
Asynchronous server-to-client events
RPC::ExtDirect::Intro(3)
A gentle(ish) introduction to RPC::ExtDirect
RPC::ExtDirect::Migration(3)
Migration notes for RPC::ExtDirect
RPC::PlClient(3)
Perl extension for writing PlRPC clients
RPC::PlServer(3)
Perl extension for writing PlRPC servers
RPC::Simple(3)
Perl classes to handle simple asynchronous RPC calls with call-back
RPC::Simple::Agent(3)
Perl extension for an agent object for RPC
RPC::Simple::AnyLocal(3)
Perl extension defining a virtual SRPC client class
RPC::Simple::AnyRemote(3)
Perl base class for a remote object accessible by RPC
RPC::Simple::AnyWhere(3)
extension defining a virtual SRPC client or server class
RPC::Simple::CallHandler(3)
Perl class to handle RPC calls with call-back
RPC::Simple::Factory(3)
Perl extension for creating RPC client
RPC::Simple::ObjectHandler(3)
Perl class to handle a remote object
RPC::Simple::Server(3)
Perl class to use in the RPC server script
RPC::XML(3)
A set of classes for core data, message and XML handling
RPC::XML::Client(3)
An XML-RPC client class
RPC::XML::Parser(3)
Interface for parsers created by RPC::XML::ParserFactory
RPC::XML::Parser::XMLLibXML(3)
A container class for XML::LibXML
RPC::XML::Parser::XMLParser(3)
A container class for XML::Parser
RPC::XML::ParserFactory(3)
A factory class for RPC::XML::Parser objects
RPC::XML::Procedure(3)
Object encapsulation of server-side RPC procedures
RPC::XML::Server(3)
A server base-class for XML-RPC
RPSL::Parser(3)
Router Policy Specification Language (RFC2622) Parser
Reaction::Manual::RenderPage(3)
Page rendering
Regexp::RegGrp(3)
Groups a regular expressions collection
ResourcePool::Command::SOAP::Lite::Call(3)
A command to invoke a SOAP RPC call with ResourcePool
Return::Value(3)
(deprecated) polymorphic return values
SQL::Interp(3)
Interpolate Perl variables into SQL statements
SVK::Log::FilterPipeline(3)
a pipeline of log filter objects
SWF::Morph(3)
SWF Morph Class
Search::OpenFTS::Morph::ISpell(3)
Perl interface to ISpell's dictionaries. Thanks mnoGoSearch (http://www.mhogosearch.org) developers team, kindly granted us to use their stemming code
Shell::Base(3)
A generic class to build line-oriented command interpreters
Slurp(3)
Slurp entire files into variables
String::TT(3)
use TT to interpolate lexical variables
Syntax::Highlight::Engine::Kate::ILERPG(3)
a Plugin for ILERPG syntax highlighting
Syntax::Highlight::Engine::Kate::RPM_Spec(3)
a Plugin for RPM Spec syntax highlighting
Template::Service(3)
General purpose template processing service
Test::Able::Runner(3)
use Test::Able without a bunch of boilerplate
Test::Corpus::Audio::MPD(3)
automate launching of fake mdp for testing purposes
Text::MicroMason::DoubleQuote(3)
Minimalist Interpolation Engine
Text::MicroMason::ServerPages(3)
Alternate Syntax like ASP/JSP Templates
Text::MicroMason::Sprintf(3)
Formatted Interpolation Engine
Time::Warp(3)
control over the flow of time
Tk::ColorEditor(3)
a general purpose Tk widget Color Editor
Tk::pTk(3), Tk2portableTk(3)
how to make your Tk source portable to other interpreted languages
ToolSet::SWC(3)
Sample toolset with strict, warnings and Carp
URBL::Prepare(3), URPL::Prepare(3)
-- prepare hostname for URBL domain lookup
Ubic(3)
polymorphic service manager
VCP::Source::null(3)
A null source, for testing purposes
Vend::Interpolate(3)
-- Interchange tag interpolation routines
WSNotification::Interfaces::WSBaseNotificationSender::NotificationProducerPort(3)
SOAP Interface for the WSBaseNotificationSender Web Service
WSNotification::Interfaces::WSBaseNotificationSender::SubscriptionManagerPort(3)
SOAP Interface for the WSBaseNotificationSender Web Service
WebService::GData::YouTube::Feed::UserProfile(3)
a youtube user profile for data API v2
WordPress::XMLRPC(3)
api to wordpress xml rpc calls
X11::XCB::Color(3)
X11 colorpixel handling
X11::Xlib::XEvent(3)
Polymorphic class for XEvent structures
X11::Xlib::XRenderPictFormat(3)
Struct defining color format for XRender
XML::Compile::SOAP::Util(3)
general purpose routines for XML::Compile::SOAP
XML::RPC(3)
-- Pure Perl implementation for an XML-RPC client and server
XML::RPC::Enc(3)
Base class for XML::RPC encoders
XML::RPC::Enc::LibXML(3)
Encode/decode XML-RPC using LibXML
XML::RPC::Fast(3)
Fast and modular implementation for an XML-RPC client and server
XML::RPC::UA(3)
Base class for XML::RPC UserAgent
XML::RPC::UA::AnyEvent(3)
XML::RPC useragent, using AnyEvent::HTTP
XML::RPC::UA::AnyEventSync(3)
Syncronous XML::RPC useragent, using AnyEvent::HTTP
XML::RPC::UA::Curl(3)
XML::RPC useragent, using Curl
XML::RPC::UA::LWP(3)
XML::RPC useragent, using LWP
XMLRPC::Lite(3)
client and server implementation of XML-RPC protocol
XMLRPC::Test(3)
Test framework for XMLRPC::Lite
XMLRPC::Transport::HTTP(3)
Server/Client side HTTP support for XMLRPC::Lite
XMLRPC::Transport::HTTP::Plack(3)
transport for Plack (http://search.cpan.org/~miyagawa/Plack/) PSGI toolkit for XMLRPC::Lite module
XMLRPC::Transport::POP3(3)
Server side POP3 support for XMLRPC::Lite
XMLRPC::Transport::TCP(3)
Server/Client side TCP support for XMLRPC::Lite
addpt(3), subpt(3), mulpt(3), divpt(3), rectaddpt(3), rectsubpt(3), insetrect(3), canonrect(3), eqpt(3), eqrect(3), ptinrect(3), rectinrect(3), rectXrect(3), rectclip(3), combinerect(3), Dx(3), Dy(3), Pt(3), Rect(3), Rpt(3)
arithmetic on points and rectangles
anim_keyread(nged)
prepares key frames from the mged savekey command for interpolation
arith3(3), add3(3), sub3(3), neg3(3), div3(3), mul3(3), eqpt3(3), closept3(3), dot3(3), cross3(3), len3(3), dist3(3), unit3(3), midpt3(3), lerp3(3), reflect3(3), nearseg3(3), pldist3(3), vdiv3(3), vrem3(3), pn2f3(3), ppp2f3(3), fff2p3(3), pdiv4(3), add4(3), sub4(3)
operations on 3-d points and planes
ascii(1), unicode(1)
interpret ASCII, Unicode characters
blogspam(1)
An RPC server for testing blog comments
brownFreq.pl(1)
Compute Information Content from the Brown Corpus
bsh(1)
ein Kommando-Interpreter mit Bildschirmeditor und History
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
ch(1)
an embeddable C/C++ interpreter
chibi-scheme(1)
a tiny Scheme interpreter
ct_rpc(3)
Common Test specific layer on Erlang/OTP rpc
disputes(7)
Handling Module Name Disputes This document describes the steps that you should take to resolve module name disputes with other npm publishers. It also describes special steps you should take about names you think infringe your trademarks. This document is a clarification of the acceptable behavior outlined in the npm Code of Conduct https://www.npmjs.com/policies/conduct, and nothing in this document should be interpreted to contradict any aspect of the npm Code of Conduct
dtfplist(1)
a general purpose utility for printing the hierarchy of the front panel components
dtksh(1)
shell command language interpreter with access to many X, Xt, Xm and XCDE functions
erl_eval(3)
The Erlang meta interpreter
exists(nged)
The exists command evaluates an expression and return 1 if true, zero if false. It serves roughly the same purpose for objects in a BRL-CAD database that the UNIX test command serves for files on a file system, with additional features specific to geometry and minus some of the filesystem specific options of test
faust(1), Faust(1)
DSP to C/C++, Rust, LLVM IR, JAVA, WebAssembly (wast/wasm), Interpreter, SOUL and D compiler
feedgnuplot(1)
General purpose pipe-oriented plotting tool
fish-completions(1)
Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
fprintd(1)
Fingerprint management daemon, and test applications
frame(3), frinit(3), frsetrects(3), frinittick(3), frclear(3), frcharofpt(3), frptofchar(3), frinsert(3), frdelete(3), frselect(3), frtick(3), frselectpaint(3), frdrawsel(3), frdrawsel0(3), frgetmouse(3)
frames of text
get9root(3), unsharp(3)
get path to root of Plan 9 tree
getcallerpc(3)
fetch return PC of current function
i(3)
Debugger/Interpreter Interface
i.pansharpen(1), i.pansharpen (1)
Image fusion algorithms to sharpen multispectral with high-res panchromatic channels
int(3)
Interpreter Interface
kjson_putint(3), kjson_putintp(3), kjson_putintstr(3), kjson_putintstrp(3), kjson_string_putint(3)
put integer content for kcgijson
mDNSResponderPosix(8), mDNSResponder(8)
Multicast and Unicast DNS daemon " Name Description for whatis database
mach-map(3), allocmap(3), addseg(3), findseg(3), addrtoseg(3), addrtosegafter(3), removeseg(3), freemap(3), get1(3), get2(3), get4(3), get8(3), put1(3), put2(3), put4(3), put8(3), rget(3), rput(3), fpformat(3), locnone(3), locaddr(3), locconst(3), locreg(3), locindir(3), loccmp(3), loceval(3), locfmt(3), locsimplify(3), lget1(3), lget2(3), lget4(3), lget8(3), lput1(3), lput2(3), lput4(3), lput8(3)
machine-independent access to address spaces and register sets
make_method(1)
Turn Perl code into an XML description for RPC::XML::Server
mod_perl2(3), mod_perl(3)
Embed a Perl interpreter in the Apache/2.x HTTP server
morphedit(1)
set up line segment correspondences between pix(5) images
mux(3), Mux(3), muxinit(3), muxrpc(3), muxthreads(3)
protocol multiplexor
nezd(1)
general-purpose messaging and notification for X11
ol(1)
an Owl Lisp compiler and interpreter
perl(1)
The Perl 5 language interpreter
perlinterp(1)
An overview of the Perl interpreter
perlipc(1)
Perl interprocess communication (signals, fifos, pipes, safe subprocesses, sockets, and semaphores)
perlrun(1)
how to execute the Perl interpreter
pipe(3)
create an interprocess channel
pixinterp2x(1)
interpolate a color pix file twice as large as the original
pixmorph(1)
morph two pix(5) images
plumber(4)
file system for interprocess messaging
pod::Prima::Clipboard(3), Prima::Clipboard(3)
GUI interprocess data exchange
poepp(1)
Interprets POE::Devel::Profiler output
project_dir(1)
Determine and query DIRPROJECT environment variables
proof(1)
troff output interpreter
pslurp(1)
parallel file download program
pt-fingerprint(1)
Convert queries into fingerprints
quaternion(3), qtom(3), mtoq(3), qadd(3), qsub(3), qneg(3), qmul(3), qdiv(3), qunit(3), qinv(3), qlen(3), slerp(3), qmid(3), qsqrt(3)
Quaternion arithmetic
r.fill.stats(1), r.fill.stats (1)
Rapidly fills (cqno data(cq cells (NULLs) of a raster map with interpolated values (IDW)
r.fillnulls(1), r.fillnulls (1)
Fills no-data areas in raster maps using spline interpolation
r.geomorphon(1), r.geomorphon (1)
Calculates geomorphons (terrain forms) and associated geometry using machine vision approach
r.in.aster(1), r.in.aster (1)
Georeference, rectify, and import Terra-ASTER imagery and relative DEMs using gdalwarp
r.resamp.bspline(1), r.resamp.bspline (1)
Performs bilinear or bicubic spline interpolation with Tykhonov regularization
r.resamp.interp(1), r.resamp.interp (1)
Resamples raster map to a finer grid using interpolation
r.resamp.rst(1), r.resamp.rst (1)
Reinterpolates and optionally computes topographic analysis from input raster map to a new raster map (possibly with different resolution) using regularized spline with tension and smoothing
r.ros(1), r.ros (1)
Generates rate of spread raster maps. Generates three, or four raster map layers showing the base (perpendicular) rate of spread (ROS), the maximum (forward) ROS, the direction of the maximum ROS, and optionally the maximum potential spotting distance for fire spread simulation
r.series.interp(1), r.series.interp (1)
Interpolates raster maps located (temporal or spatial) in between input raster maps at specific sampling positions
r.sun(1), r.sun (1)
Solar irradiance and irradiation model. Computes direct (beam), diffuse and reflected solar irradiation raster maps for given day, latitude, surface and atmospheric conditions. Solar parameters (e.g. sunrise, sunset times, declination, extraterrestrial irradiance, daylight length) are saved in the map history file. Alternatively, a local time can be specified to compute solar incidence angle and/or irradiance raster maps. The shadowing effect of the topography is optionally incorporated
r.surf.idw(1), r.surf.idw (1)
Provides surface interpolation from raster point data by Inverse Distance Squared Weighting
renderpdf.pl(1)
Applies a renderer to one or more PDF pages
rinse(8)
RPM Installation Entity
rlvm(6)
RealLive interpreter clone
rpatch(1)
convert FASTGEN ASCII databases into a format suitable for
rpc(3)
Remote Procedure Call services
rpc.cmsd(1m)
calendar manager service daemon
rpc.tlsclntd(8)
Sun RPC over TLS Client Daemon
rpc.tlsservd(8)
Sun RPC over TLS Server Daemon
rpp-arch(nged)
Used to round a specified face of an RPP by creating an RCC based on the parameters of the RPP
rpp-cap(nged)
Creates an ARB6 with the specified height at a particular face of the given RPP
sccs-histfile(1)
convert a g-filename into the s-filename counterpart
scummvm(6)
graphic adventure game interpreter
semCorFreq.pl(1)
Compute Information Content from SemCor sense-tagged corpus
semCorRawFreq.pl(1)
Compute Information Content from SemCor corpus (raw form, without using sense-tags)
sh(1), bosh(1), jsh(1)
standard and job control shell and command interpreter
sh(1), obosh(1), jsh(1)
standard and job control shell and command interpreter
strcat(3), strncat(3), strcmp(3), strncmp(3), cistrcmp(3), cistrncmp(3), strcpy(3), strncpy(3), strecpy(3), strlen(3), strchr(3), strrchr(3), strpbrk(3), strspn(3), strcspn(3), strtok(3), strdup(3), strstr(3), cistrstr(3)
string operations
svxlink(1)
A general purpose voice services system for ham radio use
t.rast.gapfill(1), t.rast.gapfill (1)
Replaces gaps in a space time raster dataset with interpolated raster maps
thread(3), alt(3), chancreate(3), chanfree(3), chanprint(3), chansetname(3), mainstacksize(3), proccreate(3), procdata(3), recv(3), recvp(3), recvul(3), send(3), sendp(3), sendul(3), nbrecv(3), nbrecvp(3), nbrecvul(3), nbsend(3), nbsendp(3), nbsendul(3), threadcreate(3), threaddata(3), threadexec(3), threadexecl(3), threadexits(3), threadexitsall(3), threadgetgrp(3), threadgetname(3), threadint(3), threadintgrp(3), threadkill(3), threadkillgrp(3), threadmain(3), threadnotify(3), threadid(3), threadpid(3), threadpin(3), threadunpin(3), threadsetgrp(3), threadsetname(3), threadsetstate(3), threadspawn(3), threadspawnd(3), threadspawnl(3), threadwaitchan(3), yield(3)
thread and proc management
threads(3)
Perl interpreter-based threads
tickit_renderbuffer_has_cursorpos(3), tickit_renderbuffer_get_cursorpos(3)
query the virtual cursor position
tt_message_xarg_add(3)
add an argument with an XDR-interpreted value to a message object
tt_message_xcontext_set(3)
set the XDR-interpreted byte-array value of a message's context
tt_pattern_xarg_add(3)
add a new argument with an interpreted XDR value to a pattern object
tt_pattern_xcontext_add(3)
add an XDR-interpreted byte-array value to this pattern's named context
tt_xcontext_join(3)
add an XDR-interpreted byte-array to the list of values
tt_xcontext_quit(3)
remove an XDR-interpreted byte-array value from the list of values
ttdbserver(1m)
RPC-based ToolTalk database server
ttdbserverd(1m)
RPC-based ToolTalk database server
type(1)
indicate how a command would be interpreted
uhd_config_info(1)
USRP Hardware Driver Build Configuration Info
uhd_find_devices(1)
USRP Hardware Driver Discovery Utility
uhd_images_downloader(1)
USRP Hardware Driver firmware/FPGA downloader
uhd_usrp_probe(1)
USRP Hardware Driver Peripheral Report Utility
usrp2_card_burner(1)
USRP N-Series FPGA/Firmware Burner
usrp_n2xx_simple_net_burner(1)
USRP N-Series FPGA/Firmware Burner
usrp_x3xx_fpga_burner(1)
USRP X-Series FPGA Burner
v.surf.bspline(1), v.surf.bspline (1)
Performs bicubic or bilinear spline interpolation with Tykhonov regularization
v.surf.idw(1), v.surf.idw (1)
Provides surface interpolation from vector point data by Inverse Distance Squared Weighting
v.surf.rst(1), v.surf.rst (1)
Performs surface interpolation from vector points map by splines. Spatial approximation and topographic analysis from given point or isoline data in vector format to floating point raster format using regularized spline with tension
v.vol.rst(1), v.vol.rst (1)
Interpolates point data to a 3D raster map using regularized spline with tension (RST) algorithm
venti-client(3), vtconnect(3), vthello(3), vtread(3), vtwrite(3), vtreadpacket(3), vtwritepacket(3), vtsync(3), vtping(3), vtrpc(3), ventidoublechecksha1(3)
Venti client
vnirt(nged)
Interprets x and y as view coordinates (i.e., +-2047) and converts them to model coordinates (local units) using a value of 2047 for view z before passing them to nirt
voxelize(nged)
Takes as input a primitive or a collection of primitives ,old_obj, and creates a region new_obj which is the collection of voxels(RPPs) approximating the old_obj
vquery_ray(nged)
Interprets x and y as view coordinates (i.e., +-2047) and converts them to model coordinates (local units) using a value of 2047 for view z before passing them to nirt
w3mir(1)
all purpose HTTP-copying and mirroring tool
wxColourPickerCtrl(3)
See external documentation: wxColourPickerCtrl
wxColourPickerEvent(3)
See external documentation: wxColourPickerEvent
wxDirPickerCtrl(3)
See external documentation: wxDirPickerCtrl
wxFileDirPickerEvent(3)
See external documentation: wxFileDirPickerEvent
xaos(6)
Fast interactive real-time fractal zoomer/morpher
home | help