Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
acquite write access for a cohort-based reader-writer lock
Example of using QuantLib to value equity options
Quit requested event
Shut down SDL
Quit requested event
Shut down a subsystem
End the current GNOME session
tell a server to terminate
filter_wait(3), filter_wait (3)
wrap waitpid to decode the exitcode and why your filter quit
send quit message to gcin
End the current GNOME session
signal ivykis to exit the main loop
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
Not Quite Perl (6)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS [options] foo.nex [tree_name] > =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id:,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Helper for holding a service that is not quite constructed yet
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3)
Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
notice sent by the browser when it exits normally
shuts down the DtInfo database engine
Row Directory Block Adjunct tied hash class. This class adds array-like splice capabilities to Genezzo::Block::RDBlock. Genezzo::Block::RDBArray uses this class as the basis of a tied array. Note: Like its parent RDBlock, this class is almost, but not quite, a pushhash
Row Directory Block Not Null (array) tied hash class. This class converts the Genezzo::Block::RDBlkA operations from a conventional array to a "Not Null" array. Genezzo::Block::RDBArray uses this class as the basis of a tied array. Note: Like its parent RDBlock, this class is almost, but not quite, a pushhash
Row Directory Block tied hash class. A class that lets you treat the contents of a block (byte buffer) as a hash. Note: This implementation is almost, but not quite, a pushhash. The push hash implementation is Genezzo::Row::RSBlock. It also forms the basis of a tied array in Genezzo::Block::RDBArray
Memcached::libmemcached::memcached_quit(3), memcached_quit(3)
Disconnect from all servers
Not quite YAML configuration plugin
a tool to scan your Perl code for its prerequisites
terminate an operation or an entire tool
SNMP Interface to Ubiquiti Access Points
transport for Plack ( PSGI toolkit for SOAP::Lite module. The module is quite similar to SOAP::Transport::HTTP::Apache. Docs were stolen completely from SOAP::Transport::HTTP::Nginx
nbjewels j,l-Move k-Rotate p-Pause q-Quit
MQTT version 5.0/3.1.1 client library
an MQTT broker
Configure SSL/TLS support for Mosquitto
the configuration file for mosquitto
a tool for initialising/configuring a Mosquitto broker instance
mosquitto_ctrl module for controlling the Mosquitto Dynamic Security plugin
manage password files for mosquitto
an MQTT version 5/3.1.1/3.1 client for publishing simple messages
an MQTT version 5/3.1.1 client for request/response messaging
an MQTT version 5/3.1.1/3.1 client for subscribing to topics
Ends the MGED process
remove a byte-array value from the list of values
remove a string value from the list of values
register lack of interest in messages that involve a file
remove an integer value from the list of values
quit the session
remove an XDR-interpreted byte-array value from the list of values
unregister interest in ToolTalk events about a file
quit a ToolTalk session
home | help