Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PC(3), UP(3), BC(3), ospeed(3), tgetent(3), tgetflag(3), tgetnum(3), tgetstr(3), tgoto(3), tputs(3)
direct curses interface to the terminfo capability database
del_curterm(3), mvcur(3), putp(3), restartterm(3), set_curterm(3), setterm(3), setupterm(3), tigetflag(3), tigetnum(3), tigetstr(3), tiparm(3), tparm(3), tputs(3), vid_attr(3), vid_puts(3), vidattr(3), vidputs(3)
curses interfaces to terminfo database
fputs(3), fputs_unlocked(3), puts(3)
output a line to a stream
BIO_get_new_index(3), BIO_meth_new(3), BIO_meth_free(3), BIO_meth_get_read_ex(3), BIO_meth_set_read_ex(3), BIO_meth_get_write_ex(3), BIO_meth_set_write_ex(3), BIO_meth_get_write(3), BIO_meth_set_write(3), BIO_meth_get_read(3), BIO_meth_set_read(3), BIO_meth_get_puts(3), BIO_meth_set_puts(3), BIO_meth_get_gets(3), BIO_meth_set_gets(3), BIO_meth_get_ctrl(3), BIO_meth_set_ctrl(3), BIO_meth_get_create(3), BIO_meth_set_create(3), BIO_meth_get_destroy(3), BIO_meth_set_destroy(3), BIO_meth_get_callback_ctrl(3), BIO_meth_set_callback_ctrl(3)
Routines to build up BIO methods
BIO_read_ex(3), BIO_write_ex(3), BIO_read(3), BIO_write(3), BIO_gets(3), BIO_puts(3)
BIO I/O functions
BIO_get_new_index(3), BIO_meth_new(3), BIO_meth_free(3), BIO_meth_get_read_ex(3), BIO_meth_set_read_ex(3), BIO_meth_get_write_ex(3), BIO_meth_set_write_ex(3), BIO_meth_get_write(3), BIO_meth_set_write(3), BIO_meth_get_read(3), BIO_meth_set_read(3), BIO_meth_get_puts(3), BIO_meth_set_puts(3), BIO_meth_get_gets(3), BIO_meth_set_gets(3), BIO_meth_get_ctrl(3), BIO_meth_set_ctrl(3), BIO_meth_get_create(3), BIO_meth_set_create(3), BIO_meth_get_destroy(3), BIO_meth_set_destroy(3), BIO_meth_get_callback_ctrl(3), BIO_meth_set_callback_ctrl(3)
Routines to build up BIO methods
BIO_read_ex(3), BIO_write_ex(3), BIO_read(3), BIO_write(3), BIO_gets(3), BIO_puts(3)
BIO I/O functions
DS28E04(3)
1-Wire EEPROM chip (4096-bit) with seven address inputs
JAM_PutSubfield(3)
Put a subfield into a subfield packet
PC(3x), UP(3x), BC(3x), ospeed(3x), tgetent(3x), tgetflag(3x), tgetnum(3x), tgetstr(3x), tgoto(3x), tputs(3x)
curses emulation of termcap
XShapeQueryExtension(3), XShapeQueryVersion(3), XShapeCombineRegion(3), XShapeCombineRectangles(3), XShapeCombineMask(3), XShapeCombineShape(3), XShapeOffsetShape(3), XShapeQueryExtents(3), XShapeSelectInput(3), XShapeInputSelected(3), XShapeGetRectangles(3)
X nonrectangular shape functions
XmtCliPrintf(3), XmtCliPrintf()(3), XmtCliPuts()(3), XmtCliClear()(3)
XmtCli widget output functions
XrmPutResource(3), XrmQPutResource(3), XrmPutStringResource(3), XrmQPutStringResource(3), XrmPutLineResource(3)
store database resources
XvPutStill(3)
write a single frame of video to a drawable
aa_puts(3)
output string to AA-lib output buffers
al_trace(3)
Outputs a debugging trace message. Allegro game programming library
catdoc(1)
reads MS-Word file and puts its content as plain text on standard output
catppt(1)
reads MS-PowerPoint file and puts its content on standard output
del_curterm(3x), mvcur(3x), putp(3x), restartterm(3x), set_curterm(3x), setterm(3x), setupterm(3x), tigetflag(3x), tigetnum(3x), tigetstr(3x), tiparm(3x), tparm(3x), tputs(3x), vid_attr(3x), vid_puts(3x), vidattr(3x), vidputs(3x)
curses interfaces to terminfo database
diffpp(1)
pretty-print diff outputs with GNU enscript
import(1)
saves any visible window on an X server and outputs it as an image file. You can capture a single window, the entire screen, or any rectangular portion of the screen. The window to capture is selected by clicking the desired window or a program option
libowfat_buffer_puts(3), buffer_puts(3)
write ASCIIZ string to buffer
libowfat_buffer_putsa(3), buffer_putsa(3)
write stralloc to buffer
libowfat_buffer_putsaflush(3), buffer_putsa(3)
write stralloc to buffer and flush
libowfat_buffer_putsalign(3), buffer_putsalign(3)
write ASCIIZ string to buffer
libowfat_buffer_putsflush(3), buffer_putsflush(3)
write ASCIIZ string to buffer and flush
libowfat_buffer_putspace(3), buffer_putspace(3)
write ASCII space to buffer
lightning-fundpsbt(7)
Command to populate PSBT inputs from the wallet
lightning-reserveinputs(7)
Construct a transaction and reserve the UTXOs it spends
lightning-signpsbt(7)
Command to sign a wallet's inputs on a provided bitcoin transaction (PSBT)
lightning-txdiscard(7)
Abandon a transaction from txprepare, release inputs
lightning-unreserveinputs(7)
Release reserved UTXOs
lightning-utxopsbt(7)
Command to populate PSBT inputs from given UTXOs
lmdbg-stat(1)
outputs statistical information based on lmdbg-run output
newusers.pl(8)
A perl script that compares a list of usernames and MD5 sums output by digestion.pl(1) to the passwd database and outputs a list of accounts that are in that list but not in the passwd database
pack_fputs(3)
Writes a string to the stream. Allegro game programming library
pack_putc(3)
Puts a character in the stream. Allegro game programming library
put_backslash(3)
Puts a path separator at the end of a path if needed. Allegro game programming library
puts.tcl85(n), puts(n)
Write to a channel
puts.tcl86(n), puts(n)
Write to a channel
puts.tcl87(n), puts(n)
Write to a channel
rwpcut(1)
Outputs a tcpdump dump file as ASCII
scene_polygon3d(3), scene_polygon3d_f(3)
Puts a polygon in the scene rendering list. Allegro game programming library
smenu(1)
filter that allows one to interactively select a word from stdin and outputs the selection to stdout
soldout_buffer(3), bufcasecmp(3), bufcmp(3), bufcmps(3), bufdup(3), bufgrow(3), bufnew(3), bufnullterm(3), bufprintf(3), bufput(3), bufputs(3), bufputc(3), bufrelease(3), bufreset(3), bufset(3), bufslurp(3), buftoi(3), vbufprintf(3)
buffer handling functions for soldout
tai64n(8)
puts a precise timestamp on each line
AMF::Perl::IO::InputStream(3)
AMF::Perl::IO::InputStream
AMF::Perl::IO::OutputStream(3)
AMF::Perl::IO::OutputStream
Algorithm::Evolutionary::Op::Crossover(3)
n-point crossover operator; puts fragments of the second operand into the first operand
Algorithm::Evolutionary::Op::Tournament_Selection(3)
Tournament selector, takes individuals from one population and puts them into another
App::DSC::DataTool::Inputs(3)
Input module factory
App::DSC::DataTool::Outputs(3)
Output module factory
Autodia::Diagram::Class(3)
Class that holds, updates and outputs the values of a diagram element of type class
Biber::Output::test(3)
Output class for loopback testing Essentially, this outputs to a string so we can look at it internally in tests
Bio::SearchIO::Writer::ResultTableWriter(3)
Outputs tab-delimited data for each Bio::Search::Result::ResultI object
HTTP::Proxy::BodyFilter::lines(3)
A filter that outputs only complete lines
HTTP::Proxy::BodyFilter::tags(3)
A filter that outputs only complete tags
Log::Dispatch(3)
Dispatches messages to one or more outputs
Log::Handler(3)
Log messages to several outputs
Net::Nmsg::Input(3)
Perl interface for nmsg inputs
Net::Nmsg::Output(3)
Perl interface for nmsg outputs
Ocsinventory::Agent::Common(3)
give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
PC(3x), UP(3x), BC(3x), ospeed(3x), tgetent(3x), tgetflag(3x), tgetnum(3x), tgetstr(3x), tgoto(3x), tputs(3x)
curses emulation of termcap
Paws::AutoScaling::PutScalingPolicy(3)
Arguments for method PutScalingPolicy on Paws::AutoScaling
Paws::AutoScaling::PutScheduledUpdateGroupAction(3)
Arguments for method PutScheduledUpdateGroupAction on Paws::AutoScaling
Paws::CloudWatchLogs::PutSubscriptionFilter(3)
Arguments for method PutSubscriptionFilter on Paws::CloudWatchLogs
Plucene::Store::InputStream(3)
a random-access input stream
Plucene::Store::OutputStream(3)
a random-access output stream
SOAP::GenericInputStream(3)
Default handler for SOAP::Parser output
SOAP::OutputStream(3)
Writes SOAP fragments
Servlet::ServletInputStream(3)
servlet input stream interface
Servlet::ServletOutputStream(3)
servlet output stream interface
UML::genericseq(3), genericseq.pl(3)
generates xml sequence diagrams from various inputs
VCP::Dest::revml(3)
Outputs versioned files to a revml file
burst(1)
Prepare shotline and burst point library inputs for PDAM
cpi(nged)
Copies old_tgc(an existing TGC shape) to a new TGC shape (new_tgc), positions the new TGC such that its base vertex is coincident with the center of the top of old_tgc, and puts mged into the primitive edit state with new_tgc selected for editing
d.colorlist(1), d.colorlist (1)
Outputs a list of all available display colors
del_curterm(3x), mvcur(3x), putp(3x), restartterm(3x), set_curterm(3x), setterm(3x), setupterm(3x), tigetflag(3x), tigetnum(3x), tigetstr(3x), tiparm(3x), tparm(3x), tputs(3x), vid_attr(3x), vid_puts(3x), vidattr(3x), vidputs(3x)
curses interfaces to terminfo database
edcodes(nged)
Puts the user into an editor to edit a file that has been filled with the ident, air code, material code, LOS, and name of all the regions in the specified objects
edcolor(nged)
Puts the user into an editor to edit a file that has been filled with the ident-based color lookup table
g.gisenv(1), g.gisenv (1)
Outputs and modifies the user(cqs current GRASS variable settings. Prints all defined GRASS variables if no option is given
g.gui.psmap(1), g.gui.psmap (1)
Tool for creating hardcopy map outputs
genericseq.pl(1)
generates xml sequence diagrams from various inputs
getsnarf(3), putsnarf(3)
window system snarf (cut and paste) buffer
ip(3), eipfmt(3), parseip(3), parseipmask(3), v4parseip(3), v4parsecidr(3), parseether(3), myipaddr(3), myetheraddr(3), maskip(3), equivip(3), defmask(3), isv4(3), v4tov6(3), v6tov4(3), nhgetl(3), nhgets(3), nhgetv(3), hnputl(3), hnputs(3), hnputv(3), ptclbsum(3), readipifc(3)
Internet protocol
kcgi_buf_puts(3)
put a character into a kcgi buffer
kcgi_buf_puts(3)
put string content into a kcgi buffer
khtml_puts(3)
put string content for kcgihtml
khttp_puts(3)
put string content for kcgi
kjson_putstring(3), kjson_putstringp(3), kjson_string_puts(3)
put string content for kcgijson
kxml_puts(3)
put string content for kcgixml
nytprofmerge(1)
Reads multiple NYTProf profiles and outputs a merged one
postscript(nged)
Temporarily attaches the Postscript display manager and outputs the current MGED display to the specified output_file in PostScript format
r.covar(1), r.covar (1)
Outputs a covariance/correlation matrix for user-specified raster map layer(s)
r.info(1), r.info (1)
Outputs basic information about a raster map
r.profile(1), r.profile (1)
Outputs the raster map layer values lying on user-defined line(s)
r.transect(1), r.transect (1)
Outputs raster map layer values lying along user defined transect line(s)
r3.gradient(1), r3.gradient (1)
Computes gradient of a 3D raster map and outputs gradient components as three 3D raster maps
r3.info(1), r3.info (1)
Outputs basic information about a user-specified 3D raster map layer
tree-collapse(1)
reads multi-line Penn trees from files or STDIN and outputs trees one per line
v.info(1), v.info (1)
Outputs basic information about a vector map
venti-fcall(3), VtEntry(3), VtFcall(3), VtRoot(3), vtentrypack(3), vtentryunpack(3), vtfcallclear(3), vtfcallfmt(3), vtfcallpack(3), vtfcallunpack(3), vtfromdisktype(3), vttodisktype(3), vtgetstring(3), vtputstring(3), vtrootpack(3), vtrootunpack(3), vtparsescore(3), vtscorefmt(3)
venti data formats
home | help