Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
auth_destroy(3), authnone_create(3), authsys_create(3), authsys_create_default(3)
library routines for client side remote procedure call authentication
boot(8)
system bootstrapping procedures
efi(8), UEFI(8)
Unified Extensible Firmware Interface bootstrapping procedures
intro(8)
introduction to system maintenance procedures and commands
pam_acct_mgmt(3)
perform PAM account validation procedures
rpc(3)
library routines for remote procedure calls
rpc_secure(3)
library routines for secure remote procedure calls
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_err(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3)
library routines for server side remote procedure call errors
xdr_accepted_reply(3), xdr_authsys_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_rejected_reply(3), xdr_replymsg(3)
XDR library routines for remote procedure calls
SSL_CTX_set_cert_verify_callback(3)
set peer certificate verification procedure
ALTER_PROCEDURE(7)
change the definition of a procedure
CALL(7)
invoke a procedure
CREATE_PROCEDURE(7)
define a new procedure
DROP_PROCEDURE(7)
remove a procedure
Itcl_RegisterC(3), Itcl_RegisterObjC(3), Itcl_FindC(3)
Associate a symbolic name with a C procedure
SPI_connect(3)
connect a procedure to the SPI manager
SPI_finish(3)
disconnect a procedure from the SPI manager
SSL_CTX_set_cert_verify_callback(3)
set peer certificate verification procedure
SSL_CTX_set_cert_verify_callback(3ossl)
set peer certificate verification procedure
Tcl_AllocStatBuf.tcl85(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_BadChannelOption.tcl85(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl86(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl87(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_CancelIdleCall.tcl85(3), Tcl_DoWhenIdle(3), Tcl_CancelIdleCall(3)
invoke a procedure when there are no pending events
Tcl_CancelIdleCall.tcl86(3), Tcl_DoWhenIdle(3), Tcl_CancelIdleCall(3)
invoke a procedure when there are no pending events
Tcl_CancelIdleCall.tcl87(3), Tcl_DoWhenIdle(3), Tcl_CancelIdleCall(3)
invoke a procedure when there are no pending events
Tcl_CreateChannelHandler.tcl85(3), Tcl_CreateChannelHandler(3), Tcl_DeleteChannelHandler(3)
call a procedure when a channel becomes readable or writable
Tcl_CreateChannelHandler.tcl86(3), Tcl_CreateChannelHandler(3), Tcl_DeleteChannelHandler(3)
call a procedure when a channel becomes readable or writable
Tcl_CreateChannelHandler.tcl87(3), Tcl_CreateChannelHandler(3), Tcl_DeleteChannelHandler(3)
call a procedure when a channel becomes readable or writable
Tcl_CreateEncoding.tcl85(3), Tcl_GetEncoding(3), Tcl_FreeEncoding(3), Tcl_GetEncodingFromObj(3), Tcl_ExternalToUtfDString(3), Tcl_ExternalToUtf(3), Tcl_UtfToExternalDString(3), Tcl_UtfToExternal(3), Tcl_WinTCharToUtf(3), Tcl_WinUtfToTChar(3), Tcl_GetEncodingName(3), Tcl_SetSystemEncoding(3), Tcl_GetEncodingNameFromEnvironment(3), Tcl_GetEncodingNames(3), Tcl_CreateEncoding(3), Tcl_GetEncodingSearchPath(3), Tcl_SetEncodingSearchPath(3), Tcl_GetDefaultEncodingDir(3), Tcl_SetDefaultEncodingDir(3)
procedures for creating and using encodings
Tcl_CreateEncoding.tcl86(3), Tcl_GetEncoding(3), Tcl_FreeEncoding(3), Tcl_GetEncodingFromObj(3), Tcl_ExternalToUtfDString(3), Tcl_ExternalToUtf(3), Tcl_UtfToExternalDString(3), Tcl_UtfToExternal(3), Tcl_WinTCharToUtf(3), Tcl_WinUtfToTChar(3), Tcl_GetEncodingName(3), Tcl_SetSystemEncoding(3), Tcl_GetEncodingNameFromEnvironment(3), Tcl_GetEncodingNames(3), Tcl_CreateEncoding(3), Tcl_GetEncodingSearchPath(3), Tcl_SetEncodingSearchPath(3), Tcl_GetDefaultEncodingDir(3), Tcl_SetDefaultEncodingDir(3)
procedures for creating and using encodings
Tcl_CreateEncoding.tcl87(3), Tcl_GetEncoding(3), Tcl_FreeEncoding(3), Tcl_GetEncodingFromObj(3), Tcl_ExternalToUtfDString(3), Tcl_ExternalToUtf(3), Tcl_UtfToExternalDString(3), Tcl_UtfToExternal(3), Tcl_GetEncodingName(3), Tcl_SetSystemEncoding(3), Tcl_GetEncodingNameFromEnvironment(3), Tcl_GetEncodingNames(3), Tcl_CreateEncoding(3), Tcl_GetEncodingSearchPath(3), Tcl_SetEncodingSearchPath(3), Tcl_GetDefaultEncodingDir(3), Tcl_SetDefaultEncodingDir(3)
procedures for creating and using encodings
Tcl_CreateFileHandler.tcl85(3), Tcl_CreateFileHandler(3), Tcl_DeleteFileHandler(3)
associate procedure callbacks with files or devices (Unix only)
Tcl_CreateFileHandler.tcl86(3), Tcl_CreateFileHandler(3), Tcl_DeleteFileHandler(3)
associate procedure callbacks with files or devices (Unix only)
Tcl_CreateFileHandler.tcl87(3), Tcl_CreateFileHandler(3), Tcl_DeleteFileHandler(3)
associate procedure callbacks with files or devices (Unix only)
Tcl_CreateHashEntry.tcl85(3), Tcl_InitHashTable(3), Tcl_InitCustomHashTable(3), Tcl_InitObjHashTable(3), Tcl_DeleteHashTable(3), Tcl_CreateHashEntry(3), Tcl_DeleteHashEntry(3), Tcl_FindHashEntry(3), Tcl_GetHashValue(3), Tcl_SetHashValue(3), Tcl_GetHashKey(3), Tcl_FirstHashEntry(3), Tcl_NextHashEntry(3), Tcl_HashStats(3)
procedures to manage hash tables
Tcl_CreateHashEntry.tcl86(3), Tcl_InitHashTable(3), Tcl_InitCustomHashTable(3), Tcl_InitObjHashTable(3), Tcl_DeleteHashTable(3), Tcl_CreateHashEntry(3), Tcl_DeleteHashEntry(3), Tcl_FindHashEntry(3), Tcl_GetHashValue(3), Tcl_SetHashValue(3), Tcl_GetHashKey(3), Tcl_FirstHashEntry(3), Tcl_NextHashEntry(3), Tcl_HashStats(3)
procedures to manage hash tables
Tcl_CreateHashEntry.tcl87(3), Tcl_InitHashTable(3), Tcl_InitCustomHashTable(3), Tcl_InitObjHashTable(3), Tcl_DeleteHashTable(3), Tcl_CreateHashEntry(3), Tcl_DeleteHashEntry(3), Tcl_FindHashEntry(3), Tcl_GetHashValue(3), Tcl_SetHashValue(3), Tcl_GetHashKey(3), Tcl_FirstHashEntry(3), Tcl_NextHashEntry(3), Tcl_HashStats(3)
procedures to manage hash tables
Tcl_CreateTimerHandler.tcl85(3), Tcl_CreateTimerHandler(3), Tcl_DeleteTimerHandler(3)
call a procedure at a given time
Tcl_CreateTimerHandler.tcl86(3), Tcl_CreateTimerHandler(3), Tcl_DeleteTimerHandler(3)
call a procedure at a given time
Tcl_CreateTimerHandler.tcl87(3), Tcl_CreateTimerHandler(3), Tcl_DeleteTimerHandler(3)
call a procedure at a given time
Tcl_GetStdChannel.tcl85(3), Tcl_GetStdChannel(3), Tcl_SetStdChannel(3)
procedures for retrieving and replacing the standard channels
Tcl_GetStdChannel.tcl86(3), Tcl_GetStdChannel(3), Tcl_SetStdChannel(3)
procedures for retrieving and replacing the standard channels
Tcl_GetStdChannel.tcl87(3), Tcl_GetStdChannel(3), Tcl_SetStdChannel(3)
procedures for retrieving and replacing the standard channels
Tcl_MakeTcpClientChannel.tcl85(3), Tcl_OpenTcpClient(3), Tcl_MakeTcpClientChannel(3), Tcl_OpenTcpServer(3)
procedures to open channels using TCP sockets
Tcl_MakeTcpClientChannel.tcl86(3), Tcl_OpenTcpClient(3), Tcl_MakeTcpClientChannel(3), Tcl_OpenTcpServer(3)
procedures to open channels using TCP sockets
Tcl_MakeTcpClientChannel.tcl87(3), Tcl_OpenTcpClient(3), Tcl_MakeTcpClientChannel(3), Tcl_OpenTcpServer(3), Tcl_OpenTcpServerEx(3)
procedures to open channels using TCP sockets
Tcl_PutEnv.tcl85(3), Tcl_PutEnv(3)
procedures to manipulate the environment
Tcl_PutEnv.tcl86(3), Tcl_PutEnv(3)
procedures to manipulate the environment
Tcl_PutEnv.tcl87(3), Tcl_PutEnv(3)
procedures to manipulate the environment
Tcl_RegisterConfig.tcl85(3), Tcl_RegisterConfig(3)
procedures to register embedded configuration information
Tcl_RegisterConfig.tcl86(3), Tcl_RegisterConfig(3)
procedures to register embedded configuration information
Tcl_RegisterConfig.tcl87(3), Tcl_RegisterConfig(3)
procedures to register embedded configuration information
Tdbc_Init(3), Tdbc_MapSqlState(3), Tdbc_TokenizeSql(3)
C procedures to facilitate writing TDBC drivers
Tk_CanvasDrawableCoords.tk85(3), Tk_CanvasTkwin(3), Tk_CanvasGetCoord(3), Tk_CanvasDrawableCoords(3), Tk_CanvasSetStippleOrigin(3), Tk_CanvasWindowCoords(3), Tk_CanvasEventuallyRedraw(3), Tk_CanvasTagsOption(3)
utility procedures for canvas type managers
Tk_CanvasDrawableCoords.tk86(3), Tk_CanvasTkwin(3), Tk_CanvasGetCoord(3), Tk_CanvasDrawableCoords(3), Tk_CanvasSetStippleOrigin(3), Tk_CanvasWindowCoords(3), Tk_CanvasEventuallyRedraw(3), Tk_CanvasTagsOption(3)
utility procedures for canvas type managers
Tk_CanvasPsBitmap.tk85(3), Tk_CanvasPsY(3), Tk_CanvasPsBitmap(3), Tk_CanvasPsColor(3), Tk_CanvasPsFont(3), Tk_CanvasPsPath(3), Tk_CanvasPsStipple(3)
utility procedures for generating Postscript for canvases
Tk_CanvasPsBitmap.tk86(3), Tk_CanvasPsY(3), Tk_CanvasPsBitmap(3), Tk_CanvasPsColor(3), Tk_CanvasPsFont(3), Tk_CanvasPsPath(3), Tk_CanvasPsStipple(3)
utility procedures for generating Postscript for canvases
Tk_CreateClientMessageHandler.tk85(3), Tk_CreateClientMessageHandler(3), Tk_DeleteClientMessageHandler(3)
associate procedure callback with ClientMessage type X events
Tk_CreateClientMessageHandler.tk86(3), Tk_CreateClientMessageHandler(3), Tk_DeleteClientMessageHandler(3)
associate procedure callback with ClientMessage type X events
Tk_CreateEventHandler.tk85(3), Tk_CreateEventHandler(3), Tk_DeleteEventHandler(3)
associate procedure callback with an X event
Tk_CreateEventHandler.tk86(3), Tk_CreateEventHandler(3), Tk_DeleteEventHandler(3)
associate procedure callback with an X event
Tk_CreateGenericHandler.tk85(3), Tk_CreateGenericHandler(3), Tk_DeleteGenericHandler(3)
associate procedure callback with all X events
Tk_CreateGenericHandler.tk86(3), Tk_CreateGenericHandler(3), Tk_DeleteGenericHandler(3)
associate procedure callback with all X events
Tk_SetClassProcs.tk85(3), Tk_SetClassProcs(3)
register widget specific procedures
Tk_SetClassProcs.tk86(3), Tk_SetClassProcs(3)
register widget specific procedures
XIfEvent(3), XCheckIfEvent(3), XPeekIfEvent(3)
check the event queue with a predicate procedure
XmGetColorCalculation(3)
A function to get the procedure used for default color calculation "XmGetColorCalculation" "Color functions" "XmGetColorCalculation"
XmSetColorCalculation(3)
A function to set the procedure used for default color calculation "XmSetColorCalculation" "Color functions" "XmSetColorCalculation"
XmtMenuActivateProcedure(3), XmtMenuActivateProcedure()(3), XmtMenuInactivateProcedure()(3)
sensitize and desensitize menu items depending on the procedures they call
XmtRegisterAll(3), XmtRegisterAll()(3)
register all standard widgets, procedures, and resource converters
XmtRegisterProcedures(3), XmtRegisterProcedures()(3), XmtRegisterCallbackProcedure()(3), XmtVaRegisterCallbackProcedures()(3)
register procedures for use with the Xmt callback converter
XmtRegisterUnixProcedures(3), XmtRegisterXtProcedures()(3), XmtRegisterXmtProcedures()(3), XmtRegisterUnixProcedures()(3)
register commonly used procedures with the Xmt callback converter
XmtSymbolAddCallback(3), XmtSymbolAddCallback()(3), XmtSymbolRemoveCallback()(3)
add and remove a procedure to be called when a symbol's value changes
XtAddCallback(3), XtAddCallbacks(3), XtRemoveCallback(3), XtRemoveCallbacks(3), XtRemoveAllCallbacks(3)
add and remove callback procedures
XtAppAddActionHook(3), XtRemoveActionHook(3)
register an action hook procedure
XtAppAddBlockHook(3), XtRemoveBlockHook(3)
register a block hook procedure
XtAppAddWorkProc(3), XtRemoveWorkProc(3)
Add and remove background processing procedures
XtCallAcceptFocus(3)
calla widget's accept_focus procedure
XtCallActionProc(3)
invoke an action procedure directly
XtSetLanguageProc(3)
set the language procedure
auto_execok.tcl85(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_mkindex_old(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
auto_execok.tcl86(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
auto_execok.tcl87(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
d_bitmap_proc(3)
Dialog procedure drawing a bitmap. Allegro game programming library
d_box_proc(3), d_shadow_box_proc(3)
Dialog procedure drawing boxes onto the screen. Allegro game programming library
d_button_proc(3)
Dialog procedure implementing a button object. Allegro game programming library
d_check_proc(3)
Dialog procedure implementing a check box object. Allegro game programming library
d_clear_proc(3)
Dialog procedure to clear the screen. Allegro game programming library
d_edit_proc(3)
Dialog procedure implementing an editable text object. Allegro game programming library
d_icon_proc(3)
Dialog procedure implementing a bitmap button. Allegro game programming library
d_keyboard_proc(3)
Invisible dialog procedure for implementing keyboard shortcuts. Allegro game programming library
d_list_proc(3)
Dialog procedure implementing a list box object. Allegro game programming library
d_menu_proc(3)
Dialog procedure implementing a menu bar object. Allegro game programming library
d_radio_proc(3)
Dialog procedure implementing a radio button object. Allegro game programming library
d_slider_proc(3)
Dialog procedure implementing a slider control object. Allegro game programming library
d_text_list_proc(3)
Dialog procedure implementing a list box object with type ahead. Allegro game programming library
d_text_proc(3), d_ctext_proc(3), d_rtext_proc(3)
Dialogs procedure drawing text onto the screen. Allegro game programming library
d_textbox_proc(3)
Dialog procedure implementing a text box object. Allegro game programming library
d_yield_proc(3)
Invisible dialog procedure that yields CPU time slices. Allegro game programming library
defncopy(1)
extract procedures and views from a Microsoft server
local(i4), itcl::local(i4)
create an object local to a procedure
local(itcl)
create an object local to a procedure
proc.tcl85(n), proc(n)
Create a Tcl procedure
proc.tcl86(n), proc(n)
Create a Tcl procedure
proc.tcl87(n), proc(n)
Create a Tcl procedure
return.tcl85(n), return(n)
Return from a procedure, or set return code of a script
return.tcl86(n), return(n)
Return from a procedure, or set return code of a script
return.tcl87(n), return(n)
Return from a procedure, or set return code of a script
sc_CLSCF(3), sc::CLSCF(3)
The CLSCF class is a base for classes implementing a self-consistent procedure for closed-shell molecules
sc_HSOSSCF(3), sc::HSOSSCF(3)
The HSOSSCF class is a base for classes implementing a self-consistent procedure for high-spin open-shell molecules
sc_SCF(3), sc::SCF(3)
The SCF class is the base for all classes that use a self-consistent field procedure to solve an effective one body problem
tailcall.tcl86(n), tailcall(n)
Replace the current procedure with another command
tailcall.tcl87(n), tailcall(n)
Replace the current procedure with another command
tclgeomap_procs(n), latitude(n), longitude(n), latlon(n), circle(n), fillsegment(n), grid_list(n), ocean_list(n)
supplementary procedures for tclgeomap
tk_focusFollowsMouse.tk85(n), tk_focusNext(n), tk_focusPrev(n), tk_focusFollowsMouse(n)
Utility procedures for managing the input focus
tk_focusFollowsMouse.tk86(n), tk_focusNext(n), tk_focusPrev(n), tk_focusFollowsMouse(n)
Utility procedures for managing the input focus
tkgeomap_procs(n), xytolatlon(n), latlontoxy(n)
supplementary procedures for geomap_lnarr and geomap_place items
unw_get_proc_info(3)
-- get info on current procedure
unw_get_proc_info_by_ip(3)
-- get procedure info by IP
unw_get_proc_name(3)
-- get name of current procedure
unw_reg_states_iterate(3)
-- get register state info on current procedure
vfs(n), ::vfs(n)
Commands and Procedures to create virtual filesystems
vfslib(n), ::vfslib(n)
Procedures to interact with virtual filesystems
watch(n)
call Tcl procedures before and after each command
Dancer::Plugin::RPC(3)
Configure endpoints for XMLRPC, JSONRPC and RESTRPC procedures
Data::ICal::Entry::Alarm::Procedure(3)
Represents a procedure-call alarm in an iCalendar file
DtPrintSetupProc(3)
Type definition for DtPrintSetupBox procedure resources
Geo::Postcodes::Selection(3)
How to use the selection procedure/method of the Geo::Postcodes::* modules
JSON::RPC::Common::Procedure::Call(3)
JSON RPC Procedure Call base class
JSON::RPC::Common::Procedure::Call::Version_1_0(3)
JSON-RPC 1.0 request
JSON::RPC::Common::Procedure::Call::Version_1_1(3)
JSON-RPC 1.1 Procedure Call
JSON::RPC::Common::Procedure::Call::Version_2_0(3)
JSON-RPC 2.0 Procedure Call
JSON::RPC::Common::Procedure::Return(3)
JSON-RPC procedure return class
JSON::RPC::Common::Procedure::Return::Error(3)
Base class for JSON-RPC errors
JSON::RPC::Common::Procedure::Return::Version_1_0(3)
JSON-RPC 1.0 error class
JSON::RPC::Common::Procedure::Return::Version_1_0::Error(3)
JSON-RPC 1.0 error class
JSON::RPC::Common::Procedure::Return::Version_1_1(3)
JSON-RPC 1.1 Procedure Return
JSON::RPC::Common::Procedure::Return::Version_1_1::Error(3)
JSON-RPC 1.1 error class
JSON::RPC::Common::Procedure::Return::Version_2_0(3)
JSON-RPC 2.0 Procedure Return
JSON::RPC::Common::Procedure::Return::Version_2_0::Error(3)
JSON-RPC 2.0 error class
JSON::RPC::Dispatcher::Procedure(3)
The data holder between RPC requests and responses
JSON::RPC::Legacy::Procedure(3)
JSON-RPC Service attributes
JSON::RPC::Procedure(3)
A JSON::RPC Procedure
JavaScript::RPC(3)
(DEPRECATED) Remote procedure calls from JavaScript
JavaScript::RPC::Server::CGI(3)
Remote procedure calls from JavaScript
RPC::EPC::Service(3)
An Asynchronous Remote Procedure Stack
RPC::XML::Procedure(3)
Object encapsulation of server-side RPC procedures
SQL::Translator::Schema::Procedure(3)
SQL::Translator procedure object
XPC(3)
XML Procedure Call
XPC::Agent(3)
XML Procedure Call client
XPC::Daemon(3)
XML Procedure Call daemon class
perlivp(1)
Perl Installation Verification Procedure
rpc(3)
Remote Procedure Call services
tt_pnotice_create(3)
create a procedure notice
tt_prequest_create(3)
create a procedure request message
home | help