Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
NgMkSockNode(3), NgNameNode(3), NgSendMsg(3), NgSendAsciiMsg(3), NgSendReplyMsg(3), NgRecvMsg(3), NgAllocRecvMsg(3), NgRecvAsciiMsg(3), NgAllocRecvAsciiMsg(3), NgSendData(3), NgRecvData(3), NgAllocRecvData(3), NgSetDebug(3), NgSetErrLog(3)
netgraph user library
Q_QADDI(3), Q_QDIVI(3), Q_QMULI(3), Q_QSUBI(3), Q_QFRACI(3), Q_QCPYVALI(3)
fixed-point math functions which apply integers to a Q number
VOP_ADVISE(9)
apply advice about use of file data
apply(1)
apply a command to a set of arguments
arc4rand(9), arc4random(9), arc4random_buf(9), is_random_seeded(9), random(9), read_random(9), read_random_uio(9)
supply pseudo-random numbers
bspatch(1)
apply a patch built with bsdiff(1)
flock(2)
apply or remove an advisory lock on an open file
fma(3), fmaf(3), fmal(3)
fused multiply-add
ldexp(3), ldexpf(3), ldexpl(3)
multiply floating-point number by integral power of 2
patch(1)
apply a diff file to an original
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
svc_dg_enablecache(3), svc_exit(3), svc_fdset(3), svc_freeargs(3), svc_getargs(3), svc_getreq_common(3), svc_getreq_poll(3), svc_getreqset(3), svc_getrpccaller(3), svc_pollset(3), svc_run(3), svc_sendreply(3)
library routines for RPC servers
vm_map_madvise(9)
apply advice about use of memory to map entries
vm_map_protect(9)
apply protection bits to a virtual memory region
xdr_accepted_reply(3), xdr_authsys_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_rejected_reply(3), xdr_replymsg(3)
XDR library routines for remote procedure calls
"glMultMatrixd(3), glMultMatrixf(3)
multiply the current matrix with the specified matrix
"glRotated(3), glRotatef(3)
multiply the current matrix by a rotation matrix
"glScaled(3), glScalef(3)
multiply the current matrix by a general scaling matrix
"glTranslated(3), glTranslatef(3)
multiply the current matrix by a translation matrix
BSbjacobi(3)
Apply the block Jacobi preconditioner
BStri_mult(3)
Multiply the matrix (A - shift*B) by a block of vectors
BStri_solve(3)
Multiply the matrix A(-1) by a block of vectors
CombShape(3), Shape_CombineBitmap(3), Shape_CombineRectangles(3), Shape_CombineRectanglesOrdered(3), Shape_CombineRegion(3), Shape_CombineWindow(3), Shape_MoveShape(3)
apply a shaping to a window
Rnmail(1)
a program for replying via mail
XkbApplyCompatMapToKey(3)
Apply the new compatibility mapping to an individual key to get its semantics updated
XmClipboardWithdrawFormat(3)
A clipboard function that indicates that the application no longer wants to supply a data item "XmClipboardWithdrawFormat" "clipboard functions" "XmClipboardWithdrawFormat"
XmtDialogOkayCallback(3), XmtDialog{Okay(3), Cancel(3), Apply(3), Reset(3), Done}Callback()(3), XmtDialogGetDataAddress()(3), XmtDialogSetReturnValue()(3)
predefined callbacks for use with automatic dialogs and functions for writing custom dialog callbacks
XmtPatchVisualInheritance(3), XmtPatchVisualInheritance()(3)
apply a runtime patch to the Shell widget class so that it handles non-default visuals better
al_apply_window_constraints(3)
Allegro 5 API
apertium-tagger-apply-new-rules(1)
rule enforcer for Apertium
apply.tcl85(n), apply(n)
Apply an anonymous function
apply.tcl86(n), apply(n)
Apply an anonymous function
apply.tcl87(n), apply(n)
Apply an anonymous function
applyBdd(3)
applies an operator to a list of BDD
applyBinBdd(3)
applies an operator to two BDD
apply_matrix(3), apply_matrix_f(3)
Multiplies a point by a transformation matrix. Allegro game programming library
apply_quat(3)
Multiplies a point by a quaternion. Allegro game programming library
applybddnode(3)
applies an operator on two bdd nodes. man1/alc_origin.1
applybddnodeite(3)
computes the IF-THEN-ELSE logical operation. man1/alc_origin.1
applybddnodelist(3)
applies an opertor to a bdd nodes list. man1/alc_origin.1
applybddnodenot(3)
complements a bdd. man1/alc_origin.1
applybddnodeterm(3)
applies an operator on two bdd nodes. man1/alc_origin.1
applydeltaiso(8)
reconstruct an iso from the old iso and the deltaiso
applydeltarpm(8)
reconstruct an rpm from a deltarpm
applyfilter(8)
apply filter settings to news spool
applygeo(1)
apply georeferencing to an existing file
applygnupgdefaults(8)
Run gpgconf --apply-defaults for all users
applymap(1)
Apply the color map in an RLE file to the pixel data
ares_parse_a_reply(3)
Parse a reply to a DNS query of type A
ares_parse_aaaa_reply(3)
Parse a reply to a DNS query of type AAAA
ares_parse_caa_reply(3)
Parse a reply to a DNS query of type CAA
ares_parse_mx_reply(3)
Parse a reply to a DNS query of type MX
ares_parse_naptr_reply(3)
Parse a reply to a DNS query of type NAPTR
ares_parse_ns_reply(3)
Parse a reply to a DNS query of type NS into a hostent
ares_parse_ptr_reply(3)
Parse a reply to a DNS query of type PTR into a hostent
ares_parse_soa_reply(3)
Parse a reply to a DNS query of type SOA
ares_parse_srv_reply(3)
Parse a reply to a DNS query of type SRV
ares_parse_txt_reply(3)
Parse a reply to a DNS query of type TXT
atp(1)
read, reply, and archive QWK format mail packets
bindtags.tk85(n), bindtags(n)
Determine which bindings apply to a window, and order of evaluation
bindtags.tk86(n), bindtags(n)
Determine which bindings apply to a window, and order of evaluation
blind-gauss-blur(1)
Apply Gaussian blur to a video
blind-set-alpha(1)
Multiply the alpha channel of a video
blind-set-luma(1)
Multiply the luminosity of a video
blind-set-saturation(1)
Multiply the saturation of a video
bwping(8)
and bwping6 are tools to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism
ck_hs_apply(3)
apply a function to hash set value
ck_rhs_apply(3)
apply a function to hash set value
ctie(1)
merge or apply CWEB change files
cxApplyFsNodeInfo(3)
Applies the information from an FsNode to a physical file or directory
dbh_sweep(3), dbh_fanout(3), dbh_foreach_sweep(3), dbh_foreach_fanout(3), dbh_exit_sweep(3), dbh_exit_fanout(3)
apply a function to all or part of the DBHashtable
elpa_hermitian_multiply(3)
Performs C = A**H * B
explain_flock_or_die(3)
control advisory lock on open file and report errors require_index { "apply or remove an advisory lock on an open file and report errors" }
exrchr(1)
apply chromatic adaptation to an OpenEXR image
flow-mask(1)
Apply tags to flow files
flow-tag(1)
Apply tags to flow files
flow-xlate(1)
Apply translations to selected fields of a flow
geoProj(3), GeoProj(3), GeoProjAlloc(3), GeoProjInit(3), GeoProjFree(3), GeoProjDestroy(3), GeoProjGetInfo(3), GeoProjGetType(3), GeoProjDescriptor(3), ProjToLatLon(3), LatLonToProj(3), SetCylEqDist(3), SetCylEqArea(3), SetMercator(3), SetLambertConfConic(3), SetLambertEqArea(3), SetStereographic(3), SetOrthographic(3), GeoProjSetRotation(3)
apply cartographic projections to geographic and map coordinates
git-am(1)
Apply a series of patches from a mailbox
git-apply(1)
Apply a patch to files and/or to the index
git-cherry-pick(1)
Apply the changes introduced by some existing commits
git-rebase(1)
Reapply commits on top of another base tip
glFrustum(3), "glFrustum(3)
multiply the current matrix by a perspective matrix
glOrtho(3), "glOrtho(3)
multiply the current matrix with an orthographic matrix
gmx-genconf(1)
Multiply a conformation in 'random' orientations rst2man-indent-level 0 1 rstReportMargin \$1
gpatch(1), patch(1)
apply a diff file to an original
hwloc-patch(1)
Apply a topology difference to an existing XML topology
hxclean(1)
apply heuristics to correct an HTML file
image_scale_txcos(3), image_scale_txcos (3)
Multiply the current set of texture coordinates uniformly
implybddnode(3)
computes a bdd that implies a conjonction of two bdd nodes. man1/alc_origin.1
lapply(1)
modify file system to match apply-able-transcript
ldns_pkt_new(3), ldns_pkt_free(3), ldns_pkt_print(3), ldns_pkt_query_new(3), ldns_pkt_query_new_frm_str(3), ldns_pkt_reply_type(3)
ldns_pkt creation, destruction and printing
libssh2_channel_wait_eof(3)
wait for the remote to reply to an EOF request
lis_array_pmul(3)
multiply each element of a vector by the corresponding element of another
lis_array_pmul(3f)
multiply each element of a vector by the corresponding of another
lis_array_scale(3)
multiply the vector by the scalar
lis_array_scale(3f)
multiply the vector by the scalar
lis_vector_pmul(3)
multiply each element of a vector by the corresponding element of another
lis_vector_scale(3)
multiply the vector by the scalar
lis_vector_scale(3f)
multiply the vector by the scalar
mcom(1), mfwd(1), mbnc(1), mrep(1)
compose, reply, forward, bounce, send messages
mkpasswd(1)
generate new password, optionally apply it to a user
modbus_reply(3)
send a reponse to the received request
modbus_reply_exception(3)
send an exception reponse
nn_reqrep(7)
request/reply scalability protocol
normal3d(l)
apply transformation matrix in Raster3D input file
notmuch-reply(1)
constructs a reply template for a set of messages
openjade(1)
apply a DSSSL stylesheet to an SGML or XML document
page_revoke(3), page_revokeRevocation methods(3)
There are two revocation method for PKIX/X.509: CRL and OCSP. Revocation is needed if the private key is lost and stolen. Depending on how picky you are, you might want to make revocation for destroyed private keys too (smartcard broken), but that should not be a problem. CRL is a list of certifiates that have expired. OCSP is an online checking method where the requestor sends a list of certificates to the OCSP server to return a signed reply if they are valid or not. Some services sends a OCSP reply as part of the hand-shake to make the revoktion decision simpler/faster for the client
pamfunc(1)
Apply a simple monadic arithmetic function to a Netpbm image synopsis
panda_applytemplate(3)
use a template page previously created
pbmlife(1)
apply Conway's rules of Life to a PBM image synopsis
pfscolortransform(1)
Apply color calibration using user provided matrix file
pfsdisplayfunction(1)
Apply display function to color or gray-scale images
pfsgamma(1)
Apply gamma correction to color or gray-scale images
pgmmedian(1)
apply a median filter to a PGM file synopsis
psfxform(1)
Apply various transformations to a PC Screen Font file
pto_mask(1)
Apply a mask
pto_template(1)
Apply a template file
ptunnel(8)
tunnel TCP connections over ICMP echo request/reply packets
puppet(8)
Usage: puppet subcommand [options] action [options] Available subcommands: Common: agent The puppet agent daemon apply Apply Puppet manifests locally config Interact with Puppet's settings. help Display Puppet help. lookup Interactive Hiera lookup module Creates, installs and searches for modules on the Puppet Forge. resource The resource abstraction layer shell Specialized: catalog Compile, save, view, and convert catalogs. describe Display help about resource types device Manage remote network devices doc Generate Puppet references epp Interact directly with the EPP template parser/renderer. facts Retrieve and store facts. filebucket Store and retrieve files in a filebucket generate Generates Puppet code from Ruby definitions. node View and manage node definitions. parser Interact directly with the parser. plugin Interact with the Puppet plugin system. script Run a puppet manifests as a script without compiling a catalog ssl Manage SSL keys and certificates for puppet SSL clients See 'puppet help subcommand action' for help on a specific subcommand action. See 'puppet help subcommand' for help on a specific subcommand. Puppet v7.8.0
puppet-apply(8)
Apply Puppet manifests locally
radclient(1)
send packets to a RADIUS server, show reply
radtest(1)
send packets to a RADIUS server, show reply
rccs(1)
apply RCS commands to sets of files
rdiff(1)
compute and apply signature-based file differences
recfmt(1)
apply a template to records
repl(1)
reply to an nmh message
restic-migrate(1)
Apply migrations
rofi-theme-selector(1)
Preview and apply themes for rofi
rrd_hwreapply(1)
Re-apply Holt-Winters prediction parameters to RRD data
samba-gpupdate(8)
apply group policy
scale3d_model(3), scale3d_model (3)
Apply or schedule a scale transform on a 3D model
set_multiply_blender(3)
Enables a multiply blender mode. Allegro game programming library
spatch(1)
apply a semantic patch file to a set of C files
termkey_push_bytes(3)
supply more bytes to the input buffer
tie(1)
merge or apply WEB change files
tiffmedian(1)
apply the median cut algorithm to data in a TIFF file
tracefilter(1)
apply a bpf filter to a trace
tslib_version(3)
simply return tslib's version string
txtconv(1)
A tool to apply TECkit mappings to convert the encoding of a plain text file
ufdbhttpd(8)
very simply HTTP daemon for ufdbGuard
unicode_canonical(3), unicode_ccc(3), unicode_decomposition_init(3), unicode_decomposition_deinit(3), unicode_decompose(3), unicode_decompose_reallocate_size(3), unicode_compose(3), unicode_composition_init(3), unicode_composition_deinit(3), unicode_composition_apply(3)
unicode canonical normalization and denormalization
unw_apply_reg_state(3)
-- apply a register state update to a cursor
vidwhacker(6)
grab images and apply random filters to them
volpack-MultMatrix(3), vpMultMatrix(3)
multiply the current transformation matrix by another matrix
volpack-Rotate(3), vpRotate(3)
multiply the current transformation matrix by a rotation matrix
volpack-Scale(3), vpScale(3)
multiply the current transformation matrix by a scaling matrix
volpack-Translate(3), vpTranslate(3)
multiply the current transformation matrix by a translation matrix
volpack-Window(3), vpWindow(3)
multiply the projection matrix by a perspective or orthographic matrix
volpack-WindowPHIGS(3), vpWindowPHIGS(3)
multiply the projection matrix by a PHIGS viewing matrix
wg-quick(8)
set up a WireGuard interface simply
wiggle(1)
apply rejected patches and perform word-wise diffs
wimapply(1)
Apply a WIM image
xmlto(1)
apply an XSL stylesheet to an XML document
CDB_File::Generator(3)
generate massive sorted CDB files simply
Catalyst::Controller::ActionRole(3)
Apply roles to action instances
Catalyst::Manual::Deployment::DevelopmentServer(3), Catalyst::Manual::DevelopmentServer(3)
Development server deployment The development server is a mini web server written in Perl. However, if you supply the "-f" option to the development server, it will load the higher performance Starman server, which can be used as an application server with a lightweight proxy web server at the front
Catalyst::TraitFor::Request::REST(3)
A role to apply to Catalyst::Request giving it REST methods and attributes
CatalystX::RoleApplicator(3)
apply roles to your Catalyst application-related classes
Class::C3::Componentised::ApplyHooks(3)
Run methods before or after components are injected
Class::Default(3)
Static calls apply to a default instantiation
Class::Workflow::State::AutoApply(3)
Automatically apply a transition upon arriving into a state
Class::Workflow::Transition::Strict(3)
Verify that the transition is in the instance's current state before applying
Crypt::Simple(3)
encrypt stuff simply
Data::Diver(3)
Simple, ad-hoc access to elements of deeply nested structures
Data::Grove(3)
-- support for deeply nested structures
Data::Rmap(3)
recursive map, apply a block to a data structure
Data::Unixish::Apply(3)
Apply one or more dux functions
Data::Unixish::cond(3)
Apply dux function conditionally
Data::Unixish::sprintf(3)
Apply sprintf() on input
DateTime::Format::Builder::Parser::Quick(3)
Use another formatter, simply
DirHandle(3)
(obsolete) supply object methods for directory handles
Email::LocalDelivery(3)
Deliver a piece of email - simply
Email::Reply(3)
reply to an email message
Email::Send(3)
Simply Sending Email
FileHandle(3)
supply object methods for filehandles
Gantry::Conf::FAQ(3)
Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ script.pl --instance=app1-dev instead of: $ script.pl --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
Goo::FileThing::Cloner(3)
Simply clone one file to another
Google::Chart::Fill::LinearGradient(3)
Apply Gradient Fill
Google::Chart::Fill::LinearStripes(3)
Apply Linear Strip Fill
Google::Chart::Fill::Solid(3)
Apply Solid Fill
Google::Chart::Title(3)
Apply Title
Gtk2::Ex::FormFactory::DialogButtons(3)
Standard Ok, Apply, Cancel Buttons
HTML::FormHandler::Meta::Role(3)
field_list and apply_list
HTML::FormHandler::Widget::ApplyRole(3)
role to apply widgets
HTML::FormHandler::Widget::Field::Role::HTMLAttributes(3)
apply HTML attributes
Hailo::Engine::Scored(3)
MegaHAL-style reply scoring for Hailo
Hash::Merge::Simple(3)
Recursively merge two or more hashes, simply
IO::Dir(3)
supply object methods for directory handles
IO::File(3)
supply object methods for filehandles
IO::Handle(3)
supply object methods for I/O handles
IO::LockedFile(3), IO::LockedFile Class(3)
supply object methods for locking files
IO::Pipe(3)
supply object methods for pipes
IO::Seekable(3)
supply seek based methods for I/O objects
IPC::System::Simple(3)
Run commands simply, with detailed diagnostics
Jabber::SimpleSend(3)
Send a Jabber message simply
Lingua::JA::Summarize::Extract::Plugin::Parser::NgramSimple(3)
a word parser by N-gram Simply
Long::Jump(3)
Mechanism for returning to a specific point from a deeply nested stack
Mail::Message::Construct::Reply(3)
reply to a Mail::Message
Math::Matrix(3)
multiply and invert matrices
Mixin::Event::Dispatch::Methods(3)
importer class for applying Mixin::Event::Dispatch methods without inheritance
MooX::Options::Role(3)
role that is apply to your object
MooX::Role::Parameterized::With(3), MooX::Role::Parameterized:With(3)
dsl to apply roles with composition parameters
MooX::Traits(3)
automatically apply roles at object creation time
Moose::Cookbook::Roles::ApplicationToInstance(3)
Applying a role to an object instance
Moose::Util::MetaRole(3)
Apply roles to any metaclass, as well as the object base class
MooseX::ClassAttribute::Trait::Application::ToClass(3)
A trait that supports applying class attributes to classes
MooseX::ClassAttribute::Trait::Application::ToRole(3)
A trait that supports applying class attributes to roles
MooseX::ClassAttribute::Trait::Role::Composite(3)
A trait that supports applying multiple roles at once
MooseX::Clone::Meta::Attribute::Trait::Clone(3)
The attribute trait for deeply cloning attributes
MooseX::Clone::Meta::Attribute::Trait::StorableClone(3)
The attribute trait for deeply cloning attributes using Storable
MooseX::Declare::Syntax::Keyword::With(3)
Apply roles within a class- or role-body
MooseX::MethodAttributes::Role::Meta::Role::Application(3)
generic role for applying a role with method attributes to something
MooseX::RelatedClassRoles(3)
Apply roles to a class related to yours
MooseX::Traits(3)
Automatically apply roles at object creation time
Mouse::Util::MetaRole(3)
Apply roles to any metaclass, as well as the object base class
MouseX::Traits(3)
automatically apply roles at object creation time
Net::DBus::ASyncReply(3)
asynchronous method reply handler
Net::LDAP::Makepath(3)
Provides a methode for creating paths in LDAP simply
Net::TacacsPlus::Packet::AccountReplyBody(3)
Tacacs+ accounting reply body
Net::TacacsPlus::Packet::AuthenReplyBody(3)
Tacacs+ authentication replay body
News::AutoReply(3)
derivative of News::Article for generating autoreplies
News::FormReply(3)
derivative of News::FormArticle and News::AutoReply
OpenXPKI::Crypto::Tool::SCEP::Command::create_certificate_reply(3), Header(3)
"Name" OpenXPKI::Crypto::Tool::SCEP::Command::create_certificate_reply
OpenXPKI::Crypto::Tool::SCEP::Command::create_crl_reply(3), Header(3)
"Name" OpenXPKI::Crypto::Tool::SCEP::Command::create_certificate_reply
OpenXPKI::Crypto::Tool::SCEP::Command::create_error_reply(3), Header(3)
"Name" OpenXPKI::Crypto::Tool::SCEP::Command::create_error_reply
OpenXPKI::Crypto::Tool::SCEP::Command::create_nextca_reply(3), Header(3)
"Name" OpenXPKI::Crypto::Tool::SCEP::Command::create_nextca_reply
OpenXPKI::Crypto::Tool::SCEP::Command::create_pending_reply(3), Header(3)
"Name" OpenXPKI::Crypto::Tool::SCEP::Command::create_pending_reply
Paws::ELB::ApplySecurityGroupsToLoadBalancer(3)
Arguments for method ApplySecurityGroupsToLoadBalancer on Paws::ELB
Paws::RDS::ApplyPendingMaintenanceAction(3)
Arguments for method ApplyPendingMaintenanceAction on Paws::RDS
Perl::Critic::Policy::ControlStructures::ProhibitDeepNests(3)
Don't write deeply nested loops and conditionals
Reaction::UI::ViewPort::Action(3)
Provide user with a form with OK, Apply and Close
Reaction::UI::ViewPort::Action::Role::Apply(3)
Integrate an Apply event into the ViewPort
Reaction::UI::ViewPort::Action::Role::Close(3)
Integrate Close and Apply events into ViewPort
Reaction::UI::ViewPort::Action::Role::OK(3)
Integrate OK, Apply and Close events
Reply(3)
read, eval, print, loop, yay!
Reply::App(3)
command line app runner for Reply
Reply::Config(3)
config loading for Reply
Reply::Plugin(3)
base class for Reply plugins
Reply::Plugin::AutoRefresh(3)
automatically refreshes the external code you use
Reply::Plugin::Autocomplete::Commands(3)
tab completion for reply commands
Reply::Plugin::Autocomplete::Functions(3)
tab completion for function names
Reply::Plugin::Autocomplete::Globals(3)
tab completion for global variables
Reply::Plugin::Autocomplete::Keywords(3)
tab completion for perl keywords
Reply::Plugin::Autocomplete::Lexicals(3)
tab completion for lexical variables
Reply::Plugin::Autocomplete::Methods(3)
tab completion for methods
Reply::Plugin::Autocomplete::Packages(3)
tab completion for package names
Reply::Plugin::CollapseStack(3)
display error stack traces only on demand
Reply::Plugin::Colors(3)
colorize output
Reply::Plugin::DataDump(3)
format results using Data::Dump
Reply::Plugin::DataDumper(3)
format results using Data::Dumper
Reply::Plugin::DataPrinter(3)
format results using Data::Printer
Reply::Plugin::Editor(3)
command to edit the current line in a text editor
Reply::Plugin::FancyPrompt(3)
provides a more informative prompt
Reply::Plugin::Hints(3)
persists lexical hints across input lines
Reply::Plugin::Interrupt(3)
allows using Ctrl+C to interrupt long-running lines
Reply::Plugin::LexicalPersistence(3)
persists lexical variables between lines
Reply::Plugin::LoadClass(3)
attempts to load classes implicitly if possible
Reply::Plugin::Nopaste(3)
command to nopaste a transcript of the current session
Reply::Plugin::Packages(3)
persist the current package between lines
Reply::Plugin::Pager(3)
command to automatically open long results in a pager
Reply::Plugin::ReadLine(3)
use Term::ReadLine for user input
Reply::Plugin::ResultCache(3)
retain previous results to be able to refer to them later
Reply::Plugin::Timer(3)
time commands
Reply::Plugin::TypeTiny(3)
improved type constraint exceptions in Reply
SOAP::Header(3)
similar to SOAP::Data elements, a SOAP::Header object simply is encoded in the SOAP Header block
SVK::Command::Merge(3)
Apply differences between two sources
Sisimai::RFC3834(3)
RFC3834 auto reply message detector
Sisimai::SMTP::Reply(3)
SMTP reply code related class
Template::Extract::Run(3)
Apply compiled regular expressions on documents
Text::Decorator(3)
Apply a chain of filters to text
Text::MicroMason::PostProcess(3)
Apply Filters to All Template Output
Text::Query::SolveAdvancedString(3)
Apply query expression on strings
Text::Query::SolveSQL(3)
Apply query expression to an SQL database
Text::Query::SolveSimpleString(3)
Apply query expression on strings
Tickit::Widget::Box(3), "Tickit::Widget::Box"(3)
apply spacing and positioning to a widget
Time::DaysInMonth(3)
-- simply report the number of days in a month
Tk::bindtags(3)
Determine which bindings apply to a window, and order of evaluation
UI::Dialog::Backend(3)
simply a collection of primarily internal methods
VCP::Patch(3)
Apply the (almost) unified diffs used in RevML
Version::Next(3)
increment module version numbers simply and correctly
applypatch(1)
apply 'makepatch' generated script to update a source tree
bk-patch(1), bk patch(1)
apply a diff file to an original
bk-resolve(1), bk resolve(1)
merge and/or apply new work after a pull
bk-takepatch(1), bk takepatch(1)
apply a patch
bwfilter(1)
apply a 3x3 filter to a black and white bw file
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
copyeval(nged)
Creates a new primitive object called new_ primitiveby applying the transformation matrices accumulated along the path_to_old_primitive to the leaf primitive shape object at the end of the path and saving the result under the name new_ primitive
espdiff(1)
apply the appropriate transformation to a set of patches
g-ply(1)
Stanford PLY exporter (BRL-CAD to PLY)
listeval(nged)
Displays primitive shape parameters after applying the accumulated transformations from the indicated path
lv2apply(1)
apply an LV2 plugin to an audio file
lv2file(1)
Apply LV2 effects to audio files
patch(1)
a program for applying a diff file to an original
pixfilter(1)
apply a 3x3 filter to a color pix file
ply-g(1)
Stanford PLY format Translator (PLY to BRL-CAD)
ptargrep(1)
Apply pattern matching to the contents of files in a tar archive
rdiffdir(1)
compute and apply signatures and diffs to directories
reply(1)
read, eval, print, loop, yay!
sca(nged)
Used to apply a scaling factor
setpdfbackground.pl(1)
Apply a background color to a PDF page
spamalyze(1)
Apply multiple Realtime Blackhole Lists to all messages in an mbox
stamppdf.pl(1)
Apply a mark to each page of a PDF
string-repeat(1)
multiply a string
t.rast.algebra(1), t.rast.algebra (1)
Apply temporal and spatial operations on space time raster datasets using temporal raster algebra
t.rast3d.algebra(1), t.rast3d.algebra (1)
Apply temporal and spatial operations on space time 3D raster datasets using temporal 3D raster algebra
t.vect.algebra(1), t.vect.algebra (1)
Apply temporal and spatial operations on space time vector datasets using temporal vector algebra
tickit_term_input_push_bytes(3)
supply more input data
tt_message_reply(3)
reply to a message
ttmedia_load_reply(3)
reply to a Display, Edit or Compose request
uips(1)
Universal IPS patch create/apply utility
v.decimate(1), v.decimate (1)
Decimates a point cloud Copies points from one vector to another while applying different decimations
home | help