FreeBSD Manual Pages

home | help

INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3): SNMP daemon loadable module interface
MODULE_PNP_INFO(9): register plug and play information for device matching
VOP_VPTOCNP(9): translate a vnode to its component name
acl_add_flag_np(3): add flags to a flagset
acl_clear_flags_np(3): clear flags from a flagset
acl_create_entry(3), acl_create_entry_np(3): create a new ACL entry
acl_delete_def_file(3), acl_delete_def_link_np(3), acl_delete_fd_np(3), acl_delete_file_np(3), acl_delete_link_np(3): delete an ACL from a file
acl_delete_entry(3), acl_delete_entry_np(3): delete an ACL entry from an ACL
acl_delete_flag_np(3): delete flags from a flagset
acl_get_brand_np(3): retrieve the ACL brand from an ACL entry
acl_get_entry_type_np(3): retrieve the ACL type from an NFSv4 ACL entry
acl_get_fd(3), acl_get_fd_np(3), acl_get_file(3), acl_get_link_np(3): get an ACL for a file
acl_get_flag_np(3): check if a flag is set in a flagset
acl_get_flagset_np(3): retrieve flagset from an NFSv4 ACL entry
acl_get_perm_np(3): check if a permission is set in a permission set
acl_is_trivial_np(3): determine whether ACL is trivial
acl_set_entry_type_np(3): set NFSv4 ACL entry type
acl_set_fd(3), acl_set_fd_np(3), acl_set_file(3), acl_set_link_np(3): set an ACL for a file
acl_set_flagset_np(3): set the flags of an NFSv4 ACL entry
acl_strip_np(3): strip extended entries from an ACL
acl_to_text(3), acl_to_text_np(3): convert an ACL to text
acl_valid(3), acl_valid_fd_np(3), acl_valid_file_np(3), acl_valid_link_np(3): validate an ACL
cbreak(3), nocbreak(3), echo(3), noecho(3), halfdelay(3), intrflush(3), keypad(3), meta(3), nodelay(3), notimeout(3), raw(3), noraw(3), noqiflush(3), qiflush(3), timeout(3), wtimeout(3), typeahead(3): curses input options
col(1): filter reverse line feeds from input
delay_output(3), filter(3), flushinp(3), getwin(3), key_name(3), keyname(3), nofilter(3), putwin(3), unctrl(3), use_env(3), use_tioctl(3), wunctrl(3): miscellaneous curses utility routines
domain_add(9), pfctlinput(9), pffinddomain(9), pffindproto(9), pffindtype(9), DOMAIN_SET(9): network domain management
fgetc(3), getc(3), getc_unlocked(3), getchar(3), getchar_unlocked(3), getw(3): get next character or word from input stream
fgetwc(3), getwc(3), getwchar(3): get next wide character from input stream
fread(3), fread_unlocked(3), fwrite(3), fwrite_unlocked(3): binary stream input/output
ieee80211_input(9): software 802.11 stack input functions
ipf(8): alters packet filtering lists for IP packet input and output
krb5_get_default_principal(3), krb5_principal(3), krb5_build_principal(3), krb5_build_principal_ext(3), krb5_build_principal_va(3), krb5_build_principal_va_ext(3), krb5_copy_principal(3), krb5_free_principal(3), krb5_make_principal(3), krb5_parse_name(3), krb5_parse_name_flags(3), krb5_parse_nametype(3), krb5_princ_set_realm(3), krb5_principal_compare(3), krb5_principal_compare_any_realm(3), krb5_principal_get_comp_string(3), krb5_principal_get_realm(3), krb5_principal_get_type(3), krb5_principal_match(3), krb5_principal_set_type(3), krb5_realm_compare(3), krb5_sname_to_principal(3), krb5_sock_to_principal(3), krb5_unparse_name(3), krb5_unparse_name_flags(3), krb5_unparse_name_fixed(3), krb5_unparse_name_fixed_flags(3), krb5_unparse_name_fixed_short(3), krb5_unparse_name_short(3): Kerberos 5 principal handling functions
linprocfs(5): Linux process file system
man.conf(5): man(1) and manpath(1) configuration files
manpath(1): display search path for manual pages
mdio(4): IEEE 802.3 Management Data Input/Output interface
morse(6): reformat input as morse code
ng_ip_input(4): netgraph IP input node type
nvlist_create(9), nvlist_destroy(9), nvlist_error(9), nvlist_set_error(9), nvlist_empty(9), nvlist_flags(9), nvlist_exists(9), nvlist_free(9), nvlist_clone(9), nvlist_dump(9), nvlist_fdump(9), nvlist_size(9), nvlist_pack(9), nvlist_unpack(9), nvlist_send(9), nvlist_recv(9), nvlist_xfer(9), nvlist_in_array(9), nvlist_next(9), nvlist_add(9), nvlist_move(9), nvlist_get(9), nvlist_take(9), nvlist_append(9): library for name/value pairs
openpam_borrow_cred(3): temporarily borrow user credentials
openpam_borrow_cred(3), openpam_free_data(3), openpam_free_envlist(3), openpam_get_feature(3), openpam_get_option(3), openpam_log(3), openpam_nullconv(3), openpam_readline(3), openpam_readlinev(3), openpam_readword(3), openpam_restore_cred(3), openpam_set_feature(3), openpam_set_option(3), openpam_straddch(3), openpam_subst(3), openpam_ttyconv(3), pam_error(3), pam_get_authtok(3), pam_info(3), pam_prompt(3), pam_setenv(3), pam_verror(3), pam_vinfo(3), pam_vprompt(3): Pluggable Authentication Modules Library
openpam_free_data(3): generic cleanup function
openpam_free_envlist(3): free an environment list
openpam_get_feature(3): query the state of an optional feature
openpam_get_option(3): returns the value of a module option
openpam_log(3): log a message through syslog
openpam_nullconv(3): null conversation function
openpam_readline(3): read a line from a file
openpam_readlinev(3): read a line from a file and split it into words
openpam_readword(3): read a word from a file, respecting shell quoting rules
openpam_restore_cred(3): restore credentials
openpam_set_feature(3): enable or disable an optional feature
openpam_set_option(3): sets the value of a module option
openpam_straddch(3): add a character to a string, expanding the buffer if needed
openpam_subst(3): substitute PAM item values in a string
openpam_ttyconv(3): simple tty-based conversation function
openpty(3), forkpty(3): auxiliary functions to obtain a pseudo-terminal
pmc_capabilities(3), pmc_cpuinfo(3), pmc_ncpu(3), pmc_npmc(3), pmc_pmcinfo(3), pmc_width(3): retrieve information about performance monitoring counters
posix_openpt(2): open a pseudo-terminal device
posix_spawn(3), posix_spawnp(3): spawn a process
posix_spawn_file_actions_addopen(3), posix_spawn_file_actions_adddup2(3), posix_spawn_file_actions_addclose(3), posix_spawn_file_actions_addclosefrom_np(3), posix_spawn_file_actions_addchdir_np(3), posix_spawn_file_actions_addfchdir_np(3): add open, dup2, close, closefrom, or chdir/fchdir actions to spawn file actions object
post_form(3), unpost_form(3): write or erase forms from associated subwindows
post_menu(3), unpost_menu(3): write or erase menus from associated subwindows
printf(3), fprintf(3), sprintf(3), snprintf(3), asprintf(3), dprintf(3), vprintf(3), vfprintf(3), vsprintf(3), vsnprintf(3), vasprintf(3), vdprintf(3): formatted output conversion
printf_l(3), asprintf_l(3), fprintf_l(3), snprintf_l(3), sprintf_l(3), vasprintf_l(3), vfprintf_l(3), vprintf_l(3), vsnprintf_l(3), vsprintf_l(3): formatted output conversion
pthread_attr_get_np(3): get attributes of existent thread
pthread_attr_getaffinity_np(3), pthread_attr_setaffinity_np(3): manage CPU affinity in thread attribute objects
pthread_attr_setcreatesuspend_np(3): prepare attribute for creation of suspended thread
pthread_get_name_np(3), pthread_getname_np(3), pthread_set_name_np pthread_setname_np(3): set and retrieve the thread name
pthread_getaffinity_np(3), pthread_setaffinity_np(3): manage CPU affinity
pthread_getthreadid_np(3): get the calling thread's integral ID
pthread_join(3), pthread_peekjoin_np(3), pthread_timedjoin_np(3): inspect thread termination state
pthread_main_np(3): identify the initial thread
pthread_multi_np(3), pthread_single_np(3): switch between multi- and single-threaded scheduling modes
pthread_mutexattr_getkind_np(3), pthread_mutexattr_setkind_np(3): mutex attribute operations (legacy)
pthread_np(3): FreeBSD extensions to POSIX thread functions
pthread_resume_all_np(3): resume all suspended threads
pthread_resume_np(3): resume suspended thread
pthread_suspend_all_np(3): suspend all active threads
pthread_suspend_np(3): suspend a thread
pthread_switch_add_np(3), pthread_switch_delete_np(3): thread context switches debugging primitives
read(2), readv(2), pread(2), preadv(2): read input
scanf(3), fscanf(3), sscanf(3), vscanf(3), vsscanf(3), vfscanf(3): input format conversion
scanf_l(3), fscanf_l(3), sscanf_l(3), vfscanf_l(3), vscanf_l(3), vsscanf_l(3): input format conversion
scanw(3), wscanw(3), mvscanw(3), mvwscanw(3), vwscanw(3), vw_scanw(3): convert formatted input from a curses window
sem_timedwait(3), sem_clockwait_np(3): lock a semaphore
sinpi(3), sinpif(3), sinpil(3): half(encycle sine functions
snd_ess(4): Ensoniq ESS ISA PnP/non-PnP bridge device driver
snd_mss(4): Microsoft Sound System ISA PnP/non-PnP bridge device driver
snp(4): tty snoop interface
soelim(1): interpret.so requests in manpages
stdio(3): standard input/output library functions
tanpi(3), tanpif(3), tanpil(3): half(encycle tangent functions
tee(1): duplicate standard input
ungetc(3): un-get character from input stream
ungetwc(3): un-get wide character from input stream
wscanf(3), fwscanf(3), swscanf(3), vwscanf(3), vswscanf(3), vfwscanf(3): wide character input format conversion
zfs-allow(8): delegate ZFS administration permissions to unprivileged users
ASN1_TYPE_get(3), ASN1_TYPE_set(3), ASN1_TYPE_set1(3), ASN1_TYPE_cmp(3), ASN1_TYPE_unpack_sequence(3), ASN1_TYPE_pack_sequence(3): ASN1_TYPE utility functions
BIO_printf(3), BIO_vprintf(3), BIO_snprintf(3), BIO_vsnprintf(3): formatted output to a BIO
BN_bn2binpad(3), BN_bn2bin(3), BN_bin2bn(3), BN_bn2lebinpad(3), BN_lebin2bn(3), BN_bn2hex(3), BN_bn2dec(3), BN_hex2bn(3), BN_dec2bn(3), BN_print(3), BN_print_fp(3), BN_bn2mpi(3), BN_mpi2bn(3): format conversions
EVP_MD_meth_dup(3), EVP_MD_meth_new(3), EVP_MD_meth_free(3), EVP_MD_meth_set_input_blocksize(3), EVP_MD_meth_set_result_size(3), EVP_MD_meth_set_app_datasize(3), EVP_MD_meth_set_flags(3), EVP_MD_meth_set_init(3), EVP_MD_meth_set_update(3), EVP_MD_meth_set_final(3), EVP_MD_meth_set_copy(3), EVP_MD_meth_set_cleanup(3), EVP_MD_meth_set_ctrl(3), EVP_MD_meth_get_input_blocksize(3), EVP_MD_meth_get_result_size(3), EVP_MD_meth_get_app_datasize(3), EVP_MD_meth_get_flags(3), EVP_MD_meth_get_init(3), EVP_MD_meth_get_update(3), EVP_MD_meth_get_final(3), EVP_MD_meth_get_copy(3), EVP_MD_meth_get_cleanup(3), EVP_MD_meth_get_ctrl(3): Routines to build up EVP_MD methods
SSL_CTX_set_read_ahead(3), SSL_CTX_get_read_ahead(3), SSL_set_read_ahead(3), SSL_get_read_ahead(3), SSL_CTX_get_default_read_ahead(3): manage whether to read as many input bytes as possible
UI(3), UI_new(3), UI_new_method(3), UI_free(3), UI_add_input_string(3), UI_dup_input_string(3), UI_add_verify_string(3), UI_dup_verify_string(3), UI_add_input_boolean(3), UI_dup_input_boolean(3), UI_add_info_string(3), UI_dup_info_string(3), UI_add_error_string(3), UI_dup_error_string(3), UI_construct_prompt(3), UI_add_user_data(3), UI_dup_user_data(3), UI_get0_user_data(3), UI_get0_result(3), UI_get_result_length(3), UI_process(3), UI_ctrl(3), UI_set_default_method(3), UI_get_default_method(3), UI_get_method(3), UI_set_method(3), UI_OpenSSL(3), UI_null(3): user interface
UI_STRING(3), UI_string_types(3), UI_get_string_type(3), UI_get_input_flags(3), UI_get0_output_string(3), UI_get0_action_string(3), UI_get0_result_string(3), UI_get_result_string_length(3), UI_get0_test_string(3), UI_get_result_minsize(3), UI_get_result_maxsize(3), UI_set_result(3), UI_set_result_ex(3): User interface string parsing
openssl-genpkey(1), genpkey(1): generate a private key
"gluBeginPolygon(3), gluEndPolygon(3): delimit a polygon description
AG_Combo(3): agar canned text input + drop-down menu widget
AG_Editable(3): agar text input widget
ALLEGRO_TOUCH_INPUT(3): Allegro 5 API
ALLEGRO_TOUCH_INPUT_MAX_TOUCH_COUNT(3): Allegro 5 API
ALLEGRO_TOUCH_INPUT_STATE(3): Allegro 5 API
ASN1_TYPE_get(3), ASN1_TYPE_set(3), ASN1_TYPE_set1(3), ASN1_TYPE_cmp(3), ASN1_TYPE_unpack_sequence(3), ASN1_TYPE_pack_sequence(3): ASN1_TYPE utility functions
ASN1_TYPE_get(3ossl), ASN1_TYPE_set(3ossl), ASN1_TYPE_set1(3ossl), ASN1_TYPE_cmp(3ossl), ASN1_TYPE_unpack_sequence(3ossl), ASN1_TYPE_pack_sequence(3ossl): ASN1_TYPE utility functions
ASN1_item_pack(3), ASN1_item_unpack(3): pack an ASN.1 object into an ASN1_STRING
AuInputTrack(3): input track structure
BIO_printf(3), BIO_vprintf(3), BIO_snprintf(3), BIO_vsnprintf(3): formatted output to a BIO
BIO_printf(3ossl), BIO_vprintf(3ossl), BIO_snprintf(3ossl), BIO_vsnprintf(3ossl): formatted output to a BIO
BN_bn2binpad(3), BN_bn2bin(3), BN_bin2bn(3), BN_bn2lebinpad(3), BN_lebin2bn(3), BN_bn2hex(3), BN_bn2dec(3), BN_hex2bn(3), BN_dec2bn(3), BN_print(3), BN_print_fp(3), BN_bn2mpi(3), BN_mpi2bn(3): format conversions
BN_bn2binpad(3ossl), BN_bn2bin(3ossl), BN_bin2bn(3ossl), BN_bn2lebinpad(3ossl), BN_lebin2bn(3ossl), BN_bn2nativepad(3ossl), BN_native2bn(3ossl), BN_bn2hex(3ossl), BN_bn2dec(3ossl), BN_hex2bn(3ossl), BN_dec2bn(3ossl), BN_print(3ossl), BN_print_fp(3ossl), BN_bn2mpi(3ossl), BN_mpi2bn(3ossl): format conversions
BSctx_set_np(3): Set the number of processors
CURLOPT_INFILESIZE(3): size of the input file to send off
CURLOPT_INFILESIZE_LARGE(3): size of the input file to send off
CURLOPT_SEEKFUNCTION(3): user callback for seeking in input stream
CURLOPT_SSL_ENABLE_NPN(3): use NPN
Compose(5): X client mappings for multi-key input sequences
DMXAddInput(3), DMXAddBackendInput(3), DMXAddConsoleInput(3): attach a new input
DMXGetInputAttributes(3): determine input device attributes
DMXGetInputCount(3): determine number of input devices
DMXRemoveInput(3): detach an input
DS28E04(3): 1-Wire EEPROM chip (4096-bit) with seven address inputs
EDS(3): Embedded Data Systems Sensors EDS0064 - Temperature EDS0065 - Temperature and Humidity EDS0066 - Temperature and Barometric Pressure EDS0067 - Temperature and Light EDS0068 - Temperature, Barometric Pressure and Light EDS0070 - Vibration EDS0071 - RTD 4-wire temperature EDS0072 - RTD 3-wire temperature EDS0080 - 8 Channel Analog Current Input EDS0082 - 8 Channel Analog Voltage Input EDS0083 - 4 Channel Analog Current Input EDS0085 - 4 Channel Analog Voltage Input EDS0090 - 8 Discrete I/O
EVP_MD_meth_dup(3), EVP_MD_meth_new(3), EVP_MD_meth_free(3), EVP_MD_meth_set_input_blocksize(3), EVP_MD_meth_set_result_size(3), EVP_MD_meth_set_app_datasize(3), EVP_MD_meth_set_flags(3), EVP_MD_meth_set_init(3), EVP_MD_meth_set_update(3), EVP_MD_meth_set_final(3), EVP_MD_meth_set_copy(3), EVP_MD_meth_set_cleanup(3), EVP_MD_meth_set_ctrl(3), EVP_MD_meth_get_input_blocksize(3), EVP_MD_meth_get_result_size(3), EVP_MD_meth_get_app_datasize(3), EVP_MD_meth_get_flags(3), EVP_MD_meth_get_init(3), EVP_MD_meth_get_update(3), EVP_MD_meth_get_final(3), EVP_MD_meth_get_copy(3), EVP_MD_meth_get_cleanup(3), EVP_MD_meth_get_ctrl(3): Routines to build up EVP_MD methods
EVP_MD_meth_new(3ossl), EVP_MD_meth_dup(3ossl), EVP_MD_meth_free(3ossl), EVP_MD_meth_set_input_blocksize(3ossl), EVP_MD_meth_set_result_size(3ossl), EVP_MD_meth_set_app_datasize(3ossl), EVP_MD_meth_set_flags(3ossl), EVP_MD_meth_set_init(3ossl), EVP_MD_meth_set_update(3ossl), EVP_MD_meth_set_final(3ossl), EVP_MD_meth_set_copy(3ossl), EVP_MD_meth_set_cleanup(3ossl), EVP_MD_meth_set_ctrl(3ossl), EVP_MD_meth_get_input_blocksize(3ossl), EVP_MD_meth_get_result_size(3ossl), EVP_MD_meth_get_app_datasize(3ossl), EVP_MD_meth_get_flags(3ossl), EVP_MD_meth_get_init(3ossl), EVP_MD_meth_get_update(3ossl), EVP_MD_meth_get_final(3ossl), EVP_MD_meth_get_copy(3ossl), EVP_MD_meth_get_cleanup(3ossl), EVP_MD_meth_get_ctrl(3ossl): Routines to build up legacy EVP_MD methods
FcNameUnparse(3): Convert a pattern back into a string that can be parsed
FcPatternPrint(3): Print a pattern for debugging
FvwmConsole(1): an fvwm command input interface
FvwmConsoleC.pl(1): Command editor for fvwm command input interface
FvwmForm(1): input form module for Fvwm
HPL_pdinfo(3): Read input parameter file
Hashtbl.HashedType(3o): The input signature of the functor Hashtbl.Make
Hashtbl.SeededHashedType(3o): The input signature of the functor Hashtbl.MakeSeeded
LZSS_UNPACK_DATA(3): Opaque structure for handling LZSS decompression. Allegro game programming library
MPI_Alltoallv(3): Sends data from all to all processes; each process may send a different amount of data and provide displacements for the input and output data
MPI_Ialltoallv(3): Sends data from all to all processes in a nonblocking way; each process may send a different amount of data and provide displacements for the input and output data
MPI_Unpack(3): Unpack a buffer according to a datatype into contiguous memory
MPI_Unpack_external(3): Unpack a buffer (packed with MPI_Pack_external) according to a datatype into contiguous memory
MPI_Unpublish_name(3): Unpublish a service name published with MPI_Publish_name
Map.OrderedType(3o): Input signature of the functor Map.Make
OSSL_CMP_SRV_process_request(3ossl), OSSL_CMP_CTX_server_perform(3ossl), OSSL_CMP_SRV_CTX_new(3ossl), OSSL_CMP_SRV_CTX_free(3ossl), OSSL_CMP_SRV_cert_request_cb_t(3ossl), OSSL_CMP_SRV_rr_cb_t(3ossl), OSSL_CMP_SRV_certConf_cb_t(3ossl), OSSL_CMP_SRV_genm_cb_t(3ossl), OSSL_CMP_SRV_error_cb_t(3ossl), OSSL_CMP_SRV_pollReq_cb_t(3ossl), OSSL_CMP_SRV_CTX_init(3ossl), OSSL_CMP_SRV_CTX_get0_cmp_ctx(3ossl), OSSL_CMP_SRV_CTX_get0_custom_ctx(3ossl), OSSL_CMP_SRV_CTX_set_send_unprotected_errors(3ossl), OSSL_CMP_SRV_CTX_set_accept_unprotected(3ossl), OSSL_CMP_SRV_CTX_set_accept_raverified(3ossl), OSSL_CMP_SRV_CTX_set_grant_implicit_confirm(3ossl): generic functions to set up and control a CMP server
OSSL_CMP_STATUSINFO_new(3ossl), OSSL_CMP_snprint_PKIStatusInfo(3ossl), OSSL_CMP_CTX_snprint_PKIStatus(3ossl): function(s) for managing the CMP PKIStatus
OSSL_DECODER_CTX(3ossl), OSSL_DECODER_CTX_new(3ossl), OSSL_DECODER_settable_ctx_params(3ossl), OSSL_DECODER_CTX_set_params(3ossl), OSSL_DECODER_CTX_free(3ossl), OSSL_DECODER_CTX_set_selection(3ossl), OSSL_DECODER_CTX_set_input_type(3ossl), OSSL_DECODER_CTX_set_input_structure(3ossl), OSSL_DECODER_CTX_add_decoder(3ossl), OSSL_DECODER_CTX_add_extra(3ossl), OSSL_DECODER_CTX_get_num_decoders(3ossl), OSSL_DECODER_INSTANCE(3ossl), OSSL_DECODER_CONSTRUCT(3ossl), OSSL_DECODER_CLEANUP(3ossl), OSSL_DECODER_CTX_set_construct(3ossl), OSSL_DECODER_CTX_set_construct_data(3ossl), OSSL_DECODER_CTX_set_cleanup(3ossl), OSSL_DECODER_CTX_get_construct(3ossl), OSSL_DECODER_CTX_get_construct_data(3ossl), OSSL_DECODER_CTX_get_cleanup(3ossl), OSSL_DECODER_export(3ossl), OSSL_DECODER_INSTANCE_get_decoder(3ossl), OSSL_DECODER_INSTANCE_get_decoder_ctx(3ossl), OSSL_DECODER_INSTANCE_get_input_type(3ossl), OSSL_DECODER_INSTANCE_get_input_structure(3ossl): Decoder context routines
QuryShape(3), Shape_GetBbox(3), Shape_GetShapeRectanglesObj(3), Shape_QueryVersion(3), Shape_ExtensionPresent(3): get info about a shaping or the shaping subsystem
SDL_PauseAudio(3): Pauses and unpauses the audio callback processing
SDL_PumpEvents(3): Pumps the event loop, gathering events from the input devices
SDL_WM_GrabInput(3): Grabs mouse and keyboard input
SSL_CTX_set_read_ahead(3), SSL_CTX_get_read_ahead(3), SSL_set_read_ahead(3), SSL_get_read_ahead(3), SSL_CTX_get_default_read_ahead(3): manage whether to read as many input bytes as possible
SSL_CTX_set_read_ahead(3ossl), SSL_CTX_get_read_ahead(3ossl), SSL_set_read_ahead(3ossl), SSL_get_read_ahead(3ossl), SSL_CTX_get_default_read_ahead(3ossl): manage whether to read as many input bytes as possible
Scanf(3o): Formatted input functions
Set.OrderedType(3o): Input signature of the functor Set.Make
Smokeping_probes_DismanPing(3), Smokeping::probes::DismanPing(3): DISMAN-PING-MIB Probe for SmokePing
Tcl_AllocStatBuf.tcl85(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_AllocStatBuf(3): procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3): procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3): procedures to interact with any filesystem
Tcl_BadChannelOption.tcl85(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3): procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl86(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3): procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl87(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3): procedures for creating and manipulating channels
Tcl_Close.tcl85(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3): buffered I/O facilities using channels
Tcl_Close.tcl86(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3): buffered I/O facilities using channels
Tcl_Close.tcl87(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3): buffered I/O facilities using channels
Tcl_GetPathType.tcl85(3), Tcl_SplitPath(3), Tcl_JoinPath(3), Tcl_GetPathType(3): manipulate platform-dependent file paths
Tcl_GetPathType.tcl86(3), Tcl_SplitPath(3), Tcl_JoinPath(3), Tcl_GetPathType(3): manipulate platform-dependent file paths
Tcl_GetPathType.tcl87(3), Tcl_SplitPath(3), Tcl_JoinPath(3), Tcl_GetPathType(3): manipulate platform-dependent file paths
UI(3), UI_new(3), UI_new_method(3), UI_free(3), UI_add_input_string(3), UI_dup_input_string(3), UI_add_verify_string(3), UI_dup_verify_string(3), UI_add_input_boolean(3), UI_dup_input_boolean(3), UI_add_info_string(3), UI_dup_info_string(3), UI_add_error_string(3), UI_dup_error_string(3), UI_construct_prompt(3), UI_add_user_data(3), UI_dup_user_data(3), UI_get0_user_data(3), UI_get0_result(3), UI_get_result_length(3), UI_process(3), UI_ctrl(3), UI_set_default_method(3), UI_get_default_method(3), UI_get_method(3), UI_set_method(3), UI_OpenSSL(3), UI_null(3): user interface
UI(3ossl), UI_new(3ossl), UI_new_method(3ossl), UI_free(3ossl), UI_add_input_string(3ossl), UI_dup_input_string(3ossl), UI_add_verify_string(3ossl), UI_dup_verify_string(3ossl), UI_add_input_boolean(3ossl), UI_dup_input_boolean(3ossl), UI_add_info_string(3ossl), UI_dup_info_string(3ossl), UI_add_error_string(3ossl), UI_dup_error_string(3ossl), UI_construct_prompt(3ossl), UI_add_user_data(3ossl), UI_dup_user_data(3ossl), UI_get0_user_data(3ossl), UI_get0_result(3ossl), UI_get_result_length(3ossl), UI_process(3ossl), UI_ctrl(3ossl), UI_set_default_method(3ossl), UI_get_default_method(3ossl), UI_get_method(3ossl), UI_set_method(3ossl), UI_OpenSSL(3ossl), UI_null(3ossl): user interface
UI_STRING(3), UI_string_types(3), UI_get_string_type(3), UI_get_input_flags(3), UI_get0_output_string(3), UI_get0_action_string(3), UI_get0_result_string(3), UI_get_result_string_length(3), UI_get0_test_string(3), UI_get_result_minsize(3), UI_get_result_maxsize(3), UI_set_result(3), UI_set_result_ex(3): User interface string parsing
UI_STRING(3ossl), UI_string_types(3ossl), UI_get_string_type(3ossl), UI_get_input_flags(3ossl), UI_get0_output_string(3ossl), UI_get0_action_string(3ossl), UI_get0_result_string(3ossl), UI_get_result_string_length(3ossl), UI_get0_test_string(3ossl), UI_get_result_minsize(3ossl), UI_get_result_maxsize(3ossl), UI_set_result(3ossl), UI_set_result_ex(3ossl): User interface string parsing
XButtonEvent(3), XKeyEvent(3), XMotionEvent(3): KeyPress, KeyRelease, ButtonPress, ButtonRelease, and MotionNotify event structures
XCreateIC(3), XDestroyIC(3), XIMOfIC(3): create, destroy, and obtain the input method of an input context
XDeviceBell(3): ring a bell on a device supported through the input extension
XFilterEvent(3): filter X events for an input method
XGetDeviceControl(3), XChangeDeviceControl(3): query and change input device controls
XGetExtensionVersion(3): query the version of the input extension
XGetFeedbackControl(3), XChangeFeedbackControl(3): query and change input device feedbacks
XGrabDeviceButton(3), XUngrabDeviceButton(3): grab/ungrab extension input device buttons
XGrabDeviceKey(3), XUngrabDeviceKey(3): grab/ungrab extension input device Keys
XListInputDevices(3), XFreeDeviceList(3): list available input devices
XLookupKeysym(3), XRefreshKeyboardMapping(3), XLookupString(3), XRebindKeysym(3): handle keyboard input events in Latin-1
XOpenDevice(3), XCloseDevice(3): open or close an extension input device
XOpenIM(3), XCloseIM(3), XSetIMValues(3), XGetIMValues(3), XDisplayOfIM(3), XLocaleOfIM(3), XRegisterIMInstantiateCallback(3), XUnregisterIMInstantiateCallback(3): open, close, and obtain input method information
XQueryDeviceState(3): query the state of an extension input device
XSelectInput(3): select input events
XSendExtensionEvent(3): send input extension events to a client
XSetDeviceFocus(3), XGetDeviceFocus(3): control extension input device focus
XSetDeviceValuators(3): initialize the valuators on an extension input device
XSetICFocus(3), XUnsetICFocus(3): set and unset input context focus
XSetInputFocus(3), XGetInputFocus(3): control input focus
XShapeQueryExtension(3), XShapeQueryVersion(3), XShapeCombineRegion(3), XShapeCombineRectangles(3), XShapeCombineMask(3), XShapeCombineShape(3), XShapeOffsetShape(3), XShapeQueryExtents(3), XShapeSelectInput(3), XShapeInputSelected(3), XShapeGetRectangles(3): X nonrectangular shape functions
XbaeInput(3): The Input widget class
XkbDeviceBell(3): Rings the bell on an X input extension device or the default keyboard
XkbDeviceBellEvent(3): Creates a bell event for an X input extension device or for the keyboard, without ringing the corresponding bell
XkbGetDeviceButtonActions(3): Query the button actions associated with an X Input Extension device
XkbGetDeviceInfo(3): Determine whether the X server allows Xkb access to particular capabilities of input devices other than the core X keyboard, or to determine the status of indicator maps, indicator names or button actions on a non-KeyClass extension device
XkbGetDeviceInfoChanges(3): Query the changes that have occurred in the button actions or indicator names and indicator maps associated with an input extension device
XkbGetDeviceLedInfo(3): Query the indicator names, maps, and state associated with an LED feedback of an input extension device
XkbSetDeviceButtonActions(3): Change only the button actions for an input extension device
XkbSetDeviceInfo(3): Modify some or all of the characteristics of an X Input Extension device
XmDataFieldGetSelectionPosition(3): A DataField function that accesses the position of the primary selection "XmDataFieldGetSelection\%Position" "DataField functions" "XmDataFieldGetSelection\%Position"
XmDataFieldSetInsertionPosition(3): A DataField function that sets the position of the insertion cursor "XmDataFieldSetInsertion\%Position" "DataField functions" "XmDataFieldSetInsertion\%Position"
XmImCloseXIM(3): An input manager function that releases the input method associated with a specified widget "XmImCloseXIM" "input manager functions" "XmImCloseXIM"
XmImFreeXIC(3): An input manager function that unregisters widgets for an XIC "XmImFreeXIC" "input manager functions" "XmImFreeXIC"
XmImGetXIC(3): An input manager function that obtains an XIC for a widget "XmImGetXIC" "input manager functions" "XmImGetXIC"
XmImGetXIM(3): An input manager function that retrieves the input method associated with a specified widget "XmImGetXIM" "input manager functions" "XmImGetXIM"
XmImMbLookupString(3): An input manager function that retrieves a composed string from an input method "XmImMbLookupString" "input manager functions" "XmImMbLookupString"
XmImMbResetIC(3): An input manager function that resets the input context for a widget
XmImRegister(3): An input manager function that registers a widget with an input manager "XmImRegister" "input manager functions" "XmImRegister"
XmImSetFocusValues(3): An input manager function that notifies an input manager that a widget has received input focus and updates the input context attributes "XmImSetFocusValues" "input manager functions" "XmImSetFocusValues"
XmImSetValues(3): An input manager function that updates attributes of an input context "XmImSetValues" "input manager functions" "XmImSetValues"
XmImSetXIC(3): An input manager function that registers an existing XIC with a widget "XmImSetXIC" "input manager functions" "XmImSetXIC"
XmImUnregister(3): An input manager function that removes a widget from association with its input manager "XmImUnregister" "input manager functions" "XmImUnregister"
XmImUnsetFocus(3): An input manager function that notifies an input method that a widget has lost input focus "XmImUnsetFocus" "input manager functions" "XmImUnsetFocus"
XmImVaSetFocusValues(3): An input manager function that notifies an input manager that a widget has received input focus and updates the input context attributes "XmImVaSetFocusValues" "input manager functions" "XmImVaSetFocusValues"
XmImVaSetValues(3): An input manager function that updates attributes of an input context "XmImVaSetValues" "input manager functions" "XmImVaSetValues"
XmStringGetLtoR(3): A compound string function that searches for a text segment in the input compound string "XmStringGetLtoR" "compound string functions" "XmStringGetLtoR"
XmStringTableUnparse(3): A convenience function that converts a table of compound strings to an array of text "XmStringTableUnparse"
XmStringUnparse(3): A compound string function that unparses text "XmStringUnparse"
XmTextFieldGetInsertionPosition(3): A TextField function that accesses the position of the insertion cursor "XmTextFieldGetInsertion\%Position" "TextField functions" "XmTextFieldGetInsertion\%Position"
XmTextFieldGetSelectionPosition(3): A TextField function that accesses the position of the primary selection "XmTextFieldGetSelection\%Position" "TextField functions" "XmTextFieldGetSelection\%Position"
XmTextFieldSetInsertionPosition(3): A TextField function that sets the position of the insertion cursor "XmTextFieldSetInsertion\%Position" "TextField functions" "XmTextFieldSetInsertion\%Position"
XmTextGetInsertionPosition(3): A Text function that accesses the position of the insert cursor "XmTextGetInsertionPosition" "Text functions" "XmTextGetInsertionPosition"
XmTextGetSelectionPosition(3): A Text function that accesses the position of the primary selection "XmTextGetSelectionPosition" "Text functions" "XmTextGetSelectionPosition"
XmTextSetInsertionPosition(3): A Text function that sets the position of the insert cursor "XmTextSetInsertionPosition" "Text functions" "XmTextSetInsertionPosition"
XmbLookupString(3), XwcLookupString(3), Xutf8LookupString(3): obtain composed input from an input method
XmbResetIC(3), XwcResetIC(3), Xutf8ResetIC(3): reset the state of an input context
XmtCliGets(3), XmtCliGets()(3): get synchronous input from an XmtCli widget
XmtDiscardButtonEvents(3), XmtDiscardButtonEvents()(3), XmtDiscardKeyPressEvents()(3): discard pending user input events
XmtInputField(3): an input field widget
XmtInputFieldGetString(3), XmtInputFieldGetString()(3), XmtInputFieldSetString()(3): query or set the value of an XmtInputField widget
XmtMsgLineGetString(3), XmtMsgLineGetString()(3), XmtMsgLineGetDouble()(3), XmtMsgLineGetInt()(3), XmtMsgLineGetUnsigned()(3), XmtMsgLineGetChar()(3): use an XmtMsgLine widget to synchronously get input from the user
XmtMsgLineSetInput(3), XmtMsgLineSetInput()(3), XmtMsgLineGetInput()(3): set or query the editable text in an XmtMsgLine widget
XmtRegisterChooser(3), XmtRegisterChooser()(3), XmtRegisterInputField()(3), XmtRegisterXmScale()(3), XmtRegisterXmScrolledText()(3), XmtRegisterXmText()(3), XmtRegisterXmTextField()(3), XmtRegisterXmToggleButton()(3): specially register input widgets for use with Xmt automatic dialog facilities
XtAddGrab(3), XtRemoveGrab(3): redirect user input to a modal widget
XtAddInput(3), XtAddTimeOut(3), XtAddWorkProc(3): register input, timeout, and workprocs
XtAppAddInput(3), XtRemoveInput(3): register and remove an input source
XtAppNextEvent(3), XtAppPending(3), XtAppPeekEvent(3), XtAppProcessEvent(3), XtDispatchEvent(3), XtAppMainLoop(3): query and process events and input
XtCallActionProc(3): invoke an action procedure directly
XtGetSelectionParameters(3): retrieve target parameters for a selection request with a single target
XtGetSelectionRequest(3): retrieve the event that triggered the XtConvertSelectionProc
XtNextEvent(3), XtPending(3), XtPeekEvent(3), XtProcessEvent(3), XtMainLoop(3): query and process events and input
XtSetSelectionParameters(3): specify target parameters for a selection request with a single target
a2jmidi_bridge(1): static bridge with one ALSA playback port and one JACK MIDI input port
activateCDKSelection(3), activateCDKSelection destroyCDKSelection drawCDKSelection eraseCDKSelection getCDKSelectionBox getCDKSelectionChoice getCDKSelectionChoices getCDKSelectionCurrent getCDKSelectionHighlight getCDKSelectionItems getCDKSelectionMode getCDKSelectionModes getCDKSelectionTitle injectCDKSelection moveCDKSelection newCDKSelection positionCDKSelection setCDKSelection setCDKSelectionBackgroundAttrib setCDKSelectionBackgroundColor setCDKSelectionBox setCDKSelectionBoxAttribute setCDKSelectionChoice setCDKSelectionChoices setCDKSelectionCurrent setCDKSelectionHighlight setCDKSelectionHorizontalChar setCDKSelectionItems setCDKSelectionLLChar setCDKSelectionLRChar setCDKSelectionMode setCDKSelectionModes setCDKSelectionPostProcess setCDKSelectionPreProcess setCDKSelectionTitle setCDKSelectionULChar setCDKSelectionURChar setCDKSelectionVerticalChar cdk_selection(3): curses selection list widget
add_mibdir(3), netsnmp_init_mib(3), shutdown_mib(3), netsnmp_read_module(3), read_mib(3), read_all_mibs(3), add_module_replacement(3), snmp_set_mib_errors(3), snmp_set_mib_warnings(3), snmp_set_save_descriptions(3), read_objid(3), snmp_parse_oid(3), get_module_node(3), print_mib(3), print_objid(3), fprint_objid(3), snprint_objid(3), print_description(3), fprint_description(3), snprint_description(3): netsnmp_mib_api functions
aenpa(1), aegis new project alias(1): create a new project alias
aenpr(1), aegis new project(1): create a new project
al_get_haptic_from_touch_input(3): Allegro 5 API
al_get_touch_input_event_source(3): Allegro 5 API
al_get_touch_input_mouse_emulation_event_source(3): Allegro 5 API
al_get_touch_input_state(3): Allegro 5 API
al_install_touch_input(3): Allegro 5 API
al_is_touch_input_haptic(3): Allegro 5 API
al_is_touch_input_installed(3): Allegro 5 API
al_uninstall_touch_input(3): Allegro 5 API
ao_string_tokenize(3): tokenize an input string
asn1parse(1ossl), ca(1ossl), ciphers(1ossl), cms(1ossl), crl(1ossl), crl2pkcs7(1ossl), dgst(1ossl), dhparam(1ossl), dsa(1ossl), dsaparam(1ossl), ec(1ossl), ecparam(1ossl), enc(1ossl), engine(1ossl), errstr(1ossl), gendsa(1ossl), genpkey(1ossl), genrsa(1ossl), info(1ossl), kdf(1ossl), mac(1ossl), nseq(1ossl), ocsp(1ossl), passwd(1ossl), pkcs12(1ossl), pkcs7(1ossl), pkcs8(1ossl), pkey(1ossl), pkeyparam(1ossl), pkeyutl(1ossl), prime(1ossl), rand(1ossl), rehash(1ossl), req(1ossl), rsa(1ossl), rsautl(1ossl), s_client(1ossl), s_server(1ossl), s_time(1ossl), sess_id(1ossl), smime(1ossl), speed(1ossl), spkac(1ossl), srp(1ossl), storeutl(1ossl), ts(1ossl), verify(1ossl), version(1ossl), x509(1ossl): OpenSSL application commands
astmkcatalog(1), MakeCatalog(1): Make a catalog from labeled input images
astscript-sort-by-night(1): Sort input FITS files by night
astwarp(1), Warp(1): warp (transform) input dataset
avs2ps(l): convert AVS image input on stdin to monochrome PostScript on stdout
bargraph(1): compile bar graphs into pic input
base64url(1): Base64Url encode or decode FILE, or standard input, to standard output
bcd(6): reformat input as punch cards

bnpass(1): bnetd password utility
bntrackd(1), bnproxy(1): bnetd tracking daemon
bogosort(1): sorts or doesn't sort files or standard input
bt_input(3): input/parsing functions in btparse library
cannacheck(1): Display information about Japanese input system Canna
cbreak(3x), nocbreak(3x), echo(3x), noecho(3x), halfdelay(3x), intrflush(3x), keypad(3x), meta(3x), nl(3x), nonl(3x), nodelay(3x), notimeout(3x), raw(3x), noraw(3x), qiflush(3x), noqiflush(3x), timeout(3x), wtimeout(3x), typeahead(3x): curses input options
celvis(1), cex(1), cvi(1), cview(1), cinput(1): The Chinese editor
cgiwrap_read(3), cgiwrap_read (3): cgiwrap input function
chrpath(1): change the rpath or runpath in binaries
col(1): filter reverse line feeds from input
columns(1), *[B-Font]columns(1): Columnize Input Text
cpupdate(8): TO BE DONE: MANPAGE
create_lzss_unpack_data(3): Creates an LZSS structure for decompression. Allegro game programming library
cups-genppd(8): generate Gutenprint PPD files for use with CUPS
cups-genppdupdate(8): update CUPS+Gutenprint PPD files
curl_easy_pause(3): pause and unpause a connection
curl_maprintf(3), curl_mfprintf(3), curl_mprintf(3), curl_msnprintf(3), curl_msprintf curl_mvaprintf(3), curl_mvfprintf(3), curl_mvprintf(3), curl_mvsnprintf(3), curl_mvsprintf(3): formatted output conversion
cvc4(5): the native input language for CVC4
dategrep(1): Grep standard input for lines that match EXPRESSION
dbh_erase(3), dbh_unerase(3), dbh_prune.3(3), dbh_unprune.3(3): erase/unerase records or prune/unprune entire branches
delay_output(3x), filter(3x), flushinp(3x), getwin(3x), key_name(3x), keyname(3x), nofilter(3x), putwin(3x), unctrl(3x), use_env(3x), use_tioctl(3x), wunctrl(3x): miscellaneous curses utility routines
delcr(1): removes a CR ( ) at the end of each line of input, if a CR is present
dir2slideshow(1): Creates an input file for dvd-slideshow from pictures in a directory
dnsjit.input(3): Input modules for dnsjit
dnsjit.input.fpcap(3): Read input from a PCAP file using fopen()
dnsjit.input.mmpcap(3): Read input from a PCAP file using mmap()
dnsjit.input.pcap(3): Read input from an interface or PCAP file using libpcap
dnsjit.input.zero(3): Dummy layer to example.input.zero
dnsjit.input.zpcap(3): Read input from a PCAP file that is compressed
dpkg-scanpackages(1): create Packages index files
dwgadd(5), dwgadd.5(5): Format of the LibreDWG dwgadd example input-file
edinplace(1): edit a file in place
egalax(4x): eGalax touch screen input driver
elographics(4x): Elographics input driver
eqe(1), eqe:(1): GUI image generator from LaTeX input
evdev(4x): Generic Linux input driver
evemu-describe(1), evemu-record(1): print information and events from an input device
evemu-device(1), evemu-play(1), evemu-event(1): create a virtual input device and replay an event sequence
evtest(1): Input device event monitor and query tool
exjoy(3): Detecting, calibrating and using joystick input. Allegro game programming library
exkeys(3): How to get input from the keyboard in different ways. Allegro game programming library
exmouse(3): Getting input from the mouse. Allegro game programming library
explain_fgetc_or_die(3): input of characters and report errors require_index { "input of characters and report errors" }
explain_fgets_or_die(3): input of strings and report errors require_index { }
explain_fread_or_die(3): binary stream input and report errors require_index { }
explain_getc_or_die(3): input of characters and report errors require_index { "input of characters and report errors" }
explain_getchar_or_die(3): input of characters and report errors require_index { "input of characters and report errors" }
explain_getw_or_die(3): input a word (int) and report errors require_index { "input a word (int) and report errors" }
explain_snprintf(3): explain snprintf(3) errors require_index { }
explain_snprintf_or_die(3): formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_vsnprintf(3): explain vsnprintf(3) errors require_index { }
explain_vsnprintf_or_die(3): formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
fblocked.tcl85(n), fblocked(n): Test whether the last input operation exhausted all available input
fblocked.tcl86(n), fblocked(n): Test whether the last input operation exhausted all available input
fblocked.tcl87(n), fblocked(n): Test whether the last input operation exhausted all available input
fcitx(1): Free Chinese Input Toy of X - a Chinese IME for XIM
find_dialog_focus(3): Searches the dialog for the object which has the input focus. Allegro game programming library
firestring_estr_sprintf(3): snprintf (3) into an estring
firestring_estr_vsprintf(3): snprintf (3) into an estring
firestring_snprintf(3): snprintf (3) provided as a replacement so programs can maintain ANSI C compliance
first(5): output data file format The data files created by the Yagi-Uda projects first are in the same format as created by input and are described under input(5)
fnpathfind(3): find a file in a list of directories
focus.tk85(n), focus(n): Manage the input focus
focus.tk86(n), focus(n): Manage the input focus
free_lzss_unpack_data(3): Frees an LZSS structure. Allegro game programming library
ftimes-xformer(1): Tranform FTimes data based on user-specified input
gallery1-to-slideshow(1): Creates an input file for dvd-slideshow from pictures in Gallery online photo album
gcin(1): an input method server
gcin2tab(1): converts text input method table to gcin's .gtab format
genpatch(1): generate patch quickly in standard FreeBSD ports format
genplist(1), GENPLIST(1): Generate a static plist
genpng(1): Generate an overview image from a source file
geography(3), REarth(3), SetREarth(3), BadAngle(3), AngleIsOK(3), AngleIsBad(3), AngleFmDeg(3), AngleToDeg(3), AngleFmRad(3), AngleToRad(3), ISin(3), ICos(3), GeoPtSetDeg(3), GeoPtSetRad(3), GeoPtGetDeg(3), GeoPtGetRad(3), GeoPtIsSomewhere(3), GeoPtIsNowhere(3), GeoPtNowhere(3), MapPtIsSomewhere(3), MapPtIsNowhere(3), MapPtNowhere(3), ScaleMapPt(3), GeoStep(3), GeoDistance(3), GeoQuickDistance(3), Azimuth(3), GCircleX(3), DomainLat(3), DomainLon(3), GwchLon(3), DomainLonPt(3), GwchLonPt(3), LonCmp(3), LatCmp(3), AngleCmp(3), LonBtwn(3), LonBtwn1(3), Rotation(3), NewRotation(3), SetRotation(3), GetRotation(3), DeleteRotation(3), Rotate(3), GeoTime_CalSet(3), GeoTime_JulSet(3), GeoTime_CalToJul(3), GeoTime_JulToCal(3), GeoTime_Incr(3), GeoTime_Cmp(3), GeoTime_Diff(3): basic geographic calculations and comparisons
gerbera(1): UPnP MediaServer
get_sound_input_cap_bits(3): Checks which audio input sample formats are supported. Allegro game programming library
get_sound_input_cap_parm(3): Detects if the specified recording parameters are supported. Allegro game programming library
get_sound_input_cap_rate(3): Returns the maximum sample frequency for recording. Allegro game programming library
get_sound_input_cap_stereo(3): Tells if the input driver is capable of stereo recording. Allegro game programming library
getkey(1): fetch one or more keys from an OpenPGP keyserver
gfold(1), fold(1): wrap each input line to fit in specified width
git-count-objects(1): Count unpacked number of objects and their disk consumption
git-repack(1): Pack unpacked objects in a repository
git-unpack-file(1): Creates a temporary file with a blobs contents
git-unpack-objects(1): Unpack objects from a packed archive
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3): allow the user to compose an input line
gluTessBeginPolygon(3), "gluTessBeginPolygon(3): delimit a polygon description
gluUnProject(3), "gluUnProject(3): map window coordinates to object coordinates
gmx-convert-tpr(1): Make a modifed run-input file rst2man-indent-level 0 1 rstReportMargin \$1
gmx-grompp(1): Make a run input file rst2man-indent-level 0 1 rstReportMargin \$1
gmx-make_edi(1): Generate input files for essential dynamics sampling rst2man-indent-level 0 1 rstReportMargin \$1
gmx-pme_error(1): Estimate the error of using PME with a given input file rst2man-indent-level 0 1 rstReportMargin \$1
gnproc(1), nproc(1): print the number of processing units available
gnutls_openpgp_privkey_sign_hash(3): API function
gnutls_openpgp_send_cert(3): API function
gnutls_pcert_export_openpgp(3): API function
gnutls_pcert_import_openpgp(3): API function
gnutls_pcert_import_openpgp_raw(3): API function
gnutls_privkey_export_openpgp(3): API function
gnutls_privkey_import_openpgp(3): API function
gnutls_privkey_import_openpgp_raw(3): API function
gnutls_pubkey_get_openpgp_key_id(3): API function
gnutls_pubkey_import_openpgp(3): API function
gnutls_pubkey_import_openpgp_raw(3): API function
gp8psk(4): webcamd driver for GENPIX DVB-S
gpg(1): OpenPGP encryption and signing tool
gpg2(1): OpenPGP encryption and signing tool
gpgv(1): Verify OpenPGP signatures
gpgv2(1): Verify OpenPGP signatures
graph(1): compile graphs into pic input
grcat(1): read from standard input, colourise it and write to standard output
gri_unpage(1): split a multi-page Gri output file into separate files
gtee(1), tee(1): read from standard input and write to standard output and files
gtk-query-immodules-3.0(1): Input method module registration utility
gtty(1), tty(1): print the file name of the terminal connected to standard input
guaclog(1): Guacamole input log interpreter
gui_mouse_focus(3): Tells if the input focus follows the mouse pointer. Allegro game programming library
gunshar(1), *[B-Font]unshar(1): unpack a gshar archive
gxargs(1), xargs(1): build and execute command lines from standard input
h5fromtxt(1): convert text input to an HDF5 file
hashdig-harvest(1), hashdig-harvest.pl(1): Harvest hashes from a one or more input files
hdf_dump(3), hdf_dump (3): dump an HDF dataset to stdout Description: Input: Output: Returns:
hdf_dump_format(3), hdf_dump_format (3): dump an HDF dataset to FILE *fp Description: Input: Output: Returns:
hdf_dump_str(3), hdf_dump_str (3): dump an HDF dataset to STRING Description: Input: Output: Returns:
hdf_get_attr(3), hdf_get_attr (3): Description: Input: Output: Returns:
hdf_obj_attr(3), hdf_obj_attr (3): Return the HDF Attributes for a node Description: Input: Output: Returns:
hdf_read_string(3), hdf_read_string (3): read an HDF string Description: Input: Output:
hdf_read_string_ignore(3), hdf_read_string_ignore (3): Read an HDF string and ignore errors Description: Input: Output:
hdf_remove_tree(3), hdf_remove_tree (3): delete a subtree of an HDF dataset Description: Input: Output: Returns:
hdf_set_attr(3), hdf_set_attr (3): Description: Input: Output: Returns:
hdf_write_file(3), hdf_write_file (3): write an HDF data file Description: Input: Output:
hdf_write_string(3), hdf_write_string (3): serialize an HDF dataset to a string Description: Input: Output:
hdfunpac(1): Unpack an HDF file
hugo-mod-npm(1): Various npm helpers
hugo-mod-npm-pack(1): Experimental: Prepares and writes a composite package.json file for your project
hxunpipe(1): convert output of hxpipe back to XML format
i3-input(1): interactively take a command for i3 window manager
idevicenotificationproxy(1): Post or observe notifications on a device
im-ja-conf(1): A configurator for the im-ja GTK2 Japanese input module
im_bsd(8), BSD input module(8): syslogd(8) input module used to log BSD kernel messages
im_file(8), FILE input module(8): syslogd(8) input module for reading files and pipes
im_tcp(8), tcp input module(8): syslogd(8) input module used to receive from tcp connections
im_udp(8), UDP input module(8): syslogd(8) input module for UDP network logging
im_unix(8), UNIX input module(8): syslogd(8) input module for unix system logging
image_to_j2k(1): This program reads in an image of a certain type and converts it to a jpeg2000 file. It is part of the OpenJPEG library. Valid input image extensions are .bmp, .pgm, .pgx, .png, .pnm, .ppm, .raw, .tga, .tif . For PNG resp. TIF it needs libpng resp. libtiff . Valid output image extensions are .j2k, .jp2
img2webp(1): create animated WebP file from a sequence of input images
inplace(1): edits files in-place through given filter commands
inplace(3am): emulate sed/perl/ruby in-place editing
input(1): Yagi-Uda project antenna defining program
input(5): input data file format
input_capabilities(3), input_capabilities (3): query platform layer or target for input capabilities
input_remap_translation(3), input_remap_translation (3): Reset or modify platform level keyboard translation
input_samplebase(3), input_samplebase (3): Change coordinate system origo for a device
input_target(3), input_target (3): Forwards the specified event table to a target frameserver
inputanalog_filter(3), inputanalog_filter (3): Change filtering / sampling options for a single analog input source
inputanalog_query(3), inputanalog_query (3): Query analog devices for filtering details
inputanalog_toggle(3), inputanalog_toggle (3): Switch all analog device processing on/off
install_sound_input(3): Initialises the sound recorder module. Allegro game programming library
j2amidi_bridge(1): static bridge with one ALSA input port and one JACK MIDI output port
j2k_dump(1): This program reads in a jpeg2000 image and dumps the contents to stdout. It is part of the OpenJPEG library. Valid input image extensions are .j2k, .jp2, .jpt
j2k_to_image(1): This program reads in a jpeg2000 image and converts it to another image type. It is part of the OpenJPEG library. Valid input image extensions are .j2k, .jp2, .j2c, .jpt Valid output image extensions are .bmp, .pgm, .pgx, .png, .pnm, .ppm, .raw, .tga, .tif . For PNG resp. TIF it needs libpng resp. libtiff
jigl2slideshow(1): Creates an input file for dvd-slideshow from pictures in a jigl online photo album
jmanpath(1): determine user's search path for Japanese man pages
jose-jwk-exc(1): Performs a key exchange using the two input keys
jose-jwk-gen(1): Creates a random JWK for each input JWK template
joystick(4x): Joystick input driver
kateenc(1): create Kate streams from text input
kbd(4x): Keyboard input driver
keyart(1): Create ASCII art of an OpenPGP key
keypressed(3): Tells if there are keypresses waiting in the input buffer. Allegro game programming library
keywait(1): pause and wait for input
kinput2(1): kanji input server for X11
krb5_get_default_principal(3), krb5_principal(3), krb5_build_principal(3), krb5_build_principal_ext(3), krb5_build_principal_va(3), krb5_build_principal_va_ext(3), krb5_copy_principal(3), krb5_free_principal(3), krb5_make_principal(3), krb5_parse_name(3), krb5_parse_name_flags(3), krb5_parse_nametype(3), krb5_princ_set_realm(3), krb5_principal_compare(3), krb5_principal_compare_any_realm(3), krb5_principal_get_comp_string(3), krb5_principal_get_realm(3), krb5_principal_get_type(3), krb5_principal_match(3), krb5_principal_set_type(3), krb5_realm_compare(3), krb5_sname_to_principal(3), krb5_sock_to_principal(3), krb5_unparse_name(3), krb5_unparse_name_flags(3), krb5_unparse_name_fixed(3), krb5_unparse_name_fixed_flags(3), krb5_unparse_name_fixed_short(3), krb5_unparse_name_short(3): Kerberos 5 principal handling functions
ldap_start_tls(3), ldap_start_tls_s(3), ldap_tls_inplace(3), ldap_install_tls(3): LDAP TLS initialization routines
ldapdiff(1): Tool to synchronize ldap servers using ldif formatted input files
ldns_octet(3): removes escaped from the input
libinput(1): tool to interface with libinput
libinput(4x): libinput-based X.Org input driver
libinput-analyze(1): analyze device data
libinput-analyze-per-slot-delta(1): analyze the per-event delta movement for touch slots
libinput-analyze-recording(1): analyze a device recording
libinput-analyze-touch-down-state(1): analyze the touch states
libinput-debug-events(1): debug helper for libinput
libinput-debug-tablet(1): debug and visualize tablet axes
libinput-list-devices(1): list local devices as recognized by libinput and default values of their configuration
libinput-measure(1): measure properties of devices
libinput-measure-fuzz(1): measure absolute axis fuzz
libinput-measure-touch-size(1): measure touch size and orientation of devices
libinput-measure-touchpad-pressure(1): measure pressure properties of devices
libinput-measure-touchpad-size(1): measure the size of a touchpad
libinput-measure-touchpad-tap(1): measure tap-to-click properties of devices
libinput-quirks(1): quirk debug helper for libinput
libinput-record(1): record kernel events
libinput-replay(1): replay kernel events from a recording
libowfat_tai_unpack(3), tai_unpack(3): convert to external TAI64 format
libowfat_taia_unpack(3), taia_unpack(3): convert to external TAI64NA format
libowfat_uint16_unpack(3), uint16_unpack(3): read an unsigned little-endian 16-bit integer
libowfat_uint16_unpack_big(3), uint16_unpack_big(3): read an unsigned big-endian 16-bit integer
libowfat_uint32_unpack(3), uint32_unpack(3): read an unsigned little-endian 32-bit integer
libowfat_uint32_unpack_big(3), uint32_unpack_big(3): read an unsigned big-endian 32-bit integer
libowfat_uint64_unpack(3), uint64_unpack(3): read an unsigned little-endian 64-bit integer
libowfat_uint64_unpack_big(3), uint64_unpack_big(3): read an unsigned big-endian 64-bit integer
librnp(3): OpenPGP implementation, available via FFI interface
libtecla(3): An interactive command-line input library
lightning-fundpsbt(7): Command to populate PSBT inputs from the wallet
lightning-reserveinputs(7): Construct a transaction and reserve the UTXOs it spends
lightning-signpsbt(7): Command to sign a wallet's inputs on a provided bitcoin transaction (PSBT)
lightning-txdiscard(7): Abandon a transaction from txprepare, release inputs
lightning-unreserveinputs(7): Release reserved UTXOs
lightning-utxopsbt(7): Command to populate PSBT inputs from given UTXOs
lis_esolver_get_iter(3): get the number of iterations for the specified eigenpair from the eigensolver
lis_esolver_get_iter(3f): get the number of iterations for the specified eigenpair from the eigensolver
lis_esolver_get_iterex(3): get the detailed information on the number of iterations for the specified eigenpair from the eigensolver
lis_esolver_get_iterex(3f): get the detailed information on the number of iterations for the specified eigenpair from the eigensolver
lis_esolver_get_iters(3): get the numbers of iterations for all the eigenpairs from the eigensolver
lis_esolver_get_iters(3f): get the numbers of iterations for all the eigenpairs from the eigensolver
lis_esolver_get_residualnorm(3): get the relative residual norm for the specified eigenpair from the eigensolver
lis_esolver_get_residualnorms(3): Get the relative residual norm for all the eigenpairs from the eigensolver
lis_esolver_get_residualnorms(3f): get the relative residual norms for all the eigenpairs from the eigensolver
lis_esolver_get_rhistory(3): Get the residual history for the specified eigenpair from the eigensolver
lis_esolver_get_rhistory(3f): get the residual history for the specified eigenpair from the eigensolver
lis_esolver_get_status(3): get the status for the specified eigenpair from the eigensolver
lis_esolver_get_status(3f): get the status for the specified eigenpair from the eigensolver
lis_esolver_get_time(3): get the execution time for the specified eigenpair from the eigensolver
lis_esolver_get_time(3f): get the execution time for the specified eigenpair from the eigensolver
lis_esolver_get_timeex(3): get the detailed information on the execution time for the specified eigenpair from the eigensolver
lis_esolver_get_timeex(3f): get the detailed information on the execution time for the specified eigenpair from the eigensolver
lis_input(3): read the matrix and vector data
lis_input(3f): read the matrix and vector data
lis_input_matrix(3): read the matrix data
lis_input_matrix(3f): read the matrix data
lis_input_vector(3): read the vector data
lis_input_vector(3f): read the vector data
list_audio_inputs(3), list_audio_inputs (3): Retrieve a list of available audio input devices
lnpdump(1): Packet monitor for Lego infrared communication
lxinput(1): a light-weight program to configure keyboard and mouse
m17nInputMethod(3m17n), Input Method (basic)(3m17n): API for Input method
m17nInputMethodWin(3m17n), Input Method (GUI)(3m17n): Input method support on window systems
m17nPlist(3m17n), Property List(3m17n): Property List objects and API for them
mAM001(3): Analog Input Module
mDI001(3): Digital Input Module
mconv_decode_stream(3m17n): Decode a stream input based on a coding system
mdbIM(5): Input Method
mdbTutorialIM(5): Tutorial of input method
mdebug_dump_im(3m17n): Dump an input method
meinproc5(1): KDE translator for XML
mfont_unparse_name(3m17n): Create a fontname from a font
mib2c.conf(5): How to write mib2c.conf files to do ANYTHING based on MIB input
minidlnad(8): MiniDLNA DLNA/UPnP-AV Server
minissdpd(8): daemon keeping track of UPnP devices up
miniupnpc(3): UPnP client library
miniupnpd(8): UPnP Internet Gateway Device Daemon
minput_close_im(3m17n): Close an input method
minput_config_command(3m17n): Configure the key sequence of an input method command
minput_config_file(3m17n): Get the name of per-user customization file
minput_config_variable(3m17n): Configure the value of an input method variable
minput_create_ic(3m17n): Create an input context
minput_destroy_ic(3m17n): Destroy an input context
minput_event_to_key(3m17n): Convert an event to an input key
minput_filter(3m17n): Filter an input key
minput_get_command(3m17n): Get information about input method command(s)
minput_get_description(3m17n): Get description text of an input method
minput_get_title_icon(3m17n): Get title and icon filename of an input method
minput_get_variable(3m17n): Get information about input method variable(s)
minput_lookup(3m17n): Look up a text produced in the input context
minput_open_im(3m17n): Open an input method
minput_reset_ic(3m17n): Reset an input context
minput_save_config(3m17n): Save configurations in per-user customization file
minput_set_spot(3m17n): Set the spot of the input context
minput_toggle(3m17n): Toggle input method
mkwinpeimg(1): Make a customized bootable image of Windows PE
modbus_read_input_bits(3): read many input bits
modbus_read_input_registers(3): read many input registers
molrender(1): The molrender program reads a molecule from an input file and can render it in a variety of ways. The output is an OOGL file that the Geomview program can read and display
monkeysphere(7): ssh and TLS authentication framework using OpenPGP Web of Trust
mousedrv(4x), mouse(4x): Xorg mouse input driver
mozplugger(7): a multimedia plugin for UNIX Web browsers that supports the mozilla npapi
mpqc(1): The Massively Parallel Quantum Chemistry program (MPQC) computes the properties of molecules from first principles. This documentation is divided into the following chapters: "o" 2 MPQC Overview "o" 2 Running MPQC "o" 2 MPQC Input "o" 2 Validating MPQC "o" 2 Running Psi 3 from MPQC "o" 2 CCA Components "o" 2 MPQC License "o" 2 MPQC Warranty
mtbl_merge(1): merge MTBL data from multiple input files into a single output file
munin(8): Munin manpage hub
munpack(1): unpack messages in MIME or split-uuencode format
ninpaths(8): Report Usenet Path header field statistics (new inpaths)
nn_inproc(7): in-process transport mechanism
nnpost(1): post news articles (nn)
normal3d(l): apply transformation matrix in Raster3D input file
notcurses-input(1): Read and display input events
notcurses_input(3): input via notcurses
notcurses_reader(3): high level widget for collecting input
npa-tool(1): displays information on the German eID card (neuer Personalausweis, nPA)
npadmin(1): examine network printer information
npcd(8): Nagios Performance C Daemon
nping(1): Network packet generation tool / ping utility
nps2gps(1): convert nucleotide-protein sets to ASN.1 genomic product sets
npush(1), npoll(1): copy files over TCP
ocf_heartbeat_WinPopup(7): Sends an SMB notification message to selected hosts
ocf_heartbeat_Xen(7): Manages Xen unprivileged domains (DomUs)
offer_focus(3): Offers the input focus to a particular object. Allegro game programming library
opam-unpin(1), opamN'45'unpin(1): N'45' An alias for pin removeN'46'
openipmi_conparms(7), openipmi_cmdparms(7): Connection parmeters for OpenIPMI
openpgp-tool(1): utility for accessing visible data OpenPGP smart cards and compatible tokens
openpgp2pem(1), -(1): openpgp2ssh translate OpenPGP keys to SSH keys
openssl-format-options(1ossl): OpenSSL command input and output format options
openssl-genpkey(1), genpkey(1): generate a private key
openssl-genpkey(1ossl): generate a private key
optionPrintVersion(3): Print the program version
optionPrintVersionAndReturn(3): Print the program version
optionProcess(3): this is the main option processing routine
oss_imux(7): Input Muplexer audio driver
ovsdb-server(5): _Server database schema Every ovsdb-server (version 2[char46]9 or later) always hosts an instance of this schema, which holds information on the status and configuration of the server itself[char46] This database is read-only[char46] This manpage describes the schema for this database[char46]
pack_ungetc(3): Moves one single character back to the input buffer. Allegro game programming library
pagermap(5f): SNPP+1 pager identifier mapping file
panda_xsnprintf(3): a safe version of vnsprintf
paperkey(1): extract secret information out of OpenPGP secret keys
parallel(1): build and execute shell command lines from standard input in parallel
parse_time(3), print_time_table(3), unparse_time(3), unparse_time_approx(3): parse and unparse time intervals
pdnmesh_input(5), pdnmesh input format(5): used by pdnmesh, a 2D finite element program
pem2openpgp(1), -(1): pem2openpgp translate PEM-encoded RSA keys to OpenPGP certificates
pfsinpfm(1): Load images or frames in PFM format
pgraph(1): compile graphs into pic input
pi-make-microsoft-freecell-board(6), make_pysol_freecell_board.py(6): Programs to generate boards to be used as input to Freecell Solver
pig(6): eformatray inputway asway Igpay Atinlay
pkg_printf(3), pkg_fprintf(3), pkg_dprintf(3), pkg_snprintf(3), pkg_asprintf(3), pkg_vprintf(3), pkg_vfprintf(3), pkg_vdprintf(3), pkg_vsnprintf(3), pkg_vasprintf(3): formatted output of package data
pl_openpl(3): pl_erase, pl_label, pl_line, pl_circle, pl_arc, pl_move, pl_cont, pl_point, pl_linemod,
pnmnoraw(1): replaced by pnmtoplainpnm
pnmtoplainpnm(1): replaced by pnmtopnm
pod2mdoc(1): Convert POD data to mdoc input
post_form(3x), unpost_form(3x): write or erase forms from associated subwindows
post_menu(3x), unpost_menu(3x): write or erase menus from associated subwindows
ppt(6): reformat input as paper tape
preconv(1): convert encoding of input files to something GNU troff
psif(8): PostScript input filter splitter for lpr
pvm_unpack(3): Unpack the active message buffer into arrays of prescribed data type
qdisable(8): disable input to a pbs destination
qenable(8): enable input to a pbs destination
qpage(1): SNPP client/server for sending messages to an alpha-numeric pager
qrencode(1): Encode input data in a QR Code and save as a PNG or EPS image
raw_surface(3), raw_surface (3): Create a new surface using a table as input
rcvpack(1): append an email from standard input to a file
read_sound_input(3): Retrieves the last recorded audio buffer. Allegro game programming library
readdir(3am): directory input parser for gawk
recordio(1): records the input and output of a program
remove_sound_input(3): Cleans up after you are finished with the sound input routines. Allegro game programming library
reordercap(1): Reorder input file by timestamp into output file
rle_getskip(3): Skip the rest of an input image
rle_open_f(3): Open a binary file for input or output with defaults. rle_open_f_noexit - Returns error code instead of exiting
rnews(8cn), cunbatch(8cn): accept and spool news input newsspool, newsrun - news input spooler and processing newsrunning - control news-processing daemon
rnp(1), RNP(1): OpenPGP-compatible signatures and encryption
rnpkeys(1), RNPKEYS(1): OpenPGP key management utility
rrd_pdpcalc(1), PDP calculation explanation(1): PDP inner calculation logics with an example by Tianpeng Xia
runpause(8): run a program after a specified delay
rzxdump(1): List contents of Sinclair ZX Spectrum input recording files
rzxtool(1): Modify Sinclair ZX Spectrum input recording files
samtools-depad(1), samtools depad(1): convert padded BAM to unpadded BAM EX in +\$1 nf ft CR . EE ft fi in
samtools-phase(1), samtools phase(1): call and phase heterozygous SNPs EX in +\$1 nf ft CR . EE ft fi in
samtools-quickcheck(1), samtools quickcheck(1): a rapid sanity check on input files EX in +\$1 nf ft CR . EE ft fi in
samtools-reheader(1), samtools reheader(1): replaces the header in the input file EX in +\$1 nf ft CR . EE ft fi in
sane-sp15c(5): SANE backend for Fujitsu ScanPartner 15C flatbed scanner
sc_GenPetite4(3), sc::GenPetite4(3): This class is an abstract base to a generalized four index petite list
sc_InputError(3), sc::InputError(3): This is thrown when invalid input is provided
sc_PointInputData(3), sc::PointInputData(3): Contains data needed at each point by a DenFunctional
sc_PsiInput(3), sc::PsiInput(3): PsiInput is a Psi input file
scanw(3x), wscanw(3x), mvscanw(3x), mvwscanw(3x), vwscanw(3x), vw_scanw(3x): convert formatted input from a curses window
sendinpaths(8): Send Usenet Path header field statistics via e-mail
set_sound_input_source(3): Selects the audio input source. Allegro game programming library
shmcat(1): dump shared memory segments, files, standard input and/or text
skk(1): program that emulates Japanese SKK input method
skkinput(1): Japanese Input Method on X environment (Ver 2.06.4)
slrnpull(1): Pull a small newsfeed for offline reading
smi_util(3), smiGetMinSize(3), smiGetMaxSize(3), smiPack(3), smiUnpack(3): SMI type utility functions
snmp_pdu_add_variable(3), snmp_varlist_add_variable(3), snmp_add_null_var(3), snmp_clone_varbind(3), snmp_set_var_objid(3), snmp_set_var_value(3), snmp_set_var_typed_value(3), snmp_set_var_typed_integer(3), print_variable(3), fprint_variable(3), snprint_variable(3), print_value(3), fprint_value(3), snprint_value(3), snmp_free_var(3), snmp_free_varbind(3): netsnmp_varbind_api functions
soelim(1): interpret.so requests in manpages
sqlite2dot(1): convert sqlite3 schema to GraphViz input
srec_input(1): input file specifications require_index { }
sslio(8): SSL input/output for service programs
start_sound_input(3): Starts recording in the specified format. Allegro game programming library
stop_sound_input(3): Stops audio recording. Allegro game programming library
string_buf_input(3), string_buf_output(3), string_buf_content(3), string_buf_length(3): string buffer streams
strptime(1): Parse input from stdin according to one of the given formats FORMATs
structs_xml_input(3), structs_xml_output(3): XML conversion for data structures
sunplus(4): sunplus webcamd driver for USB cameras
sway-input(5): input configuration file and commands
synaptics(4x): touchpad input driver
target_input(3), target_input (3): Forward input data to a frameserver
target_portconfig(3), target_portconfig (3): Request that the target frameserver switch input configuration mode for a specific port
tclgeomap(n), georadius(n), latlonok(n), mapptok(n), lonbtwn(n), gclcross(n), rotatpt(n), scalept(n), domnlat(n), domnlon(n), domnlonpt(n), gwchlon(n), gwchpt(n), dmstodec(n), dectodm(n), dectodms(n), cartg(n), centroid(n), projection(n), lnarr(n), place(n): commands for manipulating geographic data in Tcl
tcpdump2xplot(1): converts tcpdump output to xplot input for analysis
tcxmlcheck(1): Check information in smil input file
tdomcmd(n), tdom(n): tdom is an expat parser object extension to create an in-memory DOM tree from the input while parsing
termkey_push_bytes(3): supply more bytes to the input buffer
textpack(1): Pack and unpack Flex files containing text
tifffastcrop(1): extracts (crops) a rectangular region from a tiff file, avoiding loading the full source image input.tif into memory
tixInputOnly(n): Create and manipulate TIX InputOnly widgets '" '" '" '"
tk_focusFollowsMouse.tk85(n), tk_focusNext(n), tk_focusPrev(n), tk_focusFollowsMouse(n): Utility procedures for managing the input focus
tk_focusFollowsMouse.tk86(n), tk_focusNext(n), tk_focusPrev(n), tk_focusFollowsMouse(n): Utility procedures for managing the input focus
tohtml(1): Create HTML from LaTeX input
tpm_sealdata(1): seal input data to the system's TPM
ts_close(3): close a touch screen input device
ts_close_restricted(3): use a custom function for closing the touchscreen's input device file
ts_open(3): open a touch screen input device
ts_open_restricted(3): use a custom function for opening the touchscreen's input device file
ts_setup(3): find, open and configure a touch screen input device
ts_uinput(1): A daemon program creating a tslib-filtered and calibrated input event device
unireverse(1): Reverse each line of UTF-8 input character-by-character
unknownpleasures(6): a waterfall graph of the signal from pulsar PSR B1919+21
unpaper(1): Post-processing tool for scanned sheets of paper
uuid_parse(3): convert an input UUID string into binary representation
uuid_unparse(3): convert an UUID from binary representation to a string
vmmouse(4x): VMware Mouse input driver
vnpstext(1): PostScript filter for Vietnamese text printing
void(4x): null input driver
wacom(4x): Wacom input driver
wav2cdr(1): converts input in (or similar to) wav format to cdr format suitable for writing onto audio CDs
webcamd(8): daemon which provide access to USB webcam, USB DVB, USB radio, USB input, USB tablet and more devices
winpr-hash(1): NTLM hashing tool
winpr-makecert(1): A tool to create X.509 certificates
wlog(7), wLog(7): WinPR logging facility
wninput(5), noun.suffix(5), verb.suffix(5), adj.suffix(5), adv.suffix(5): WordNet lexicographer files that are input to grind (1WN)
wnpkgs(7): description of various WordNet system packages
wvunpack(1): decodes wavpack encoded files
xcb-examples(3): manpage examples
xcb-requests(3): about request manpages
xcb_set_input_focus(3): Sets input focus
xin(1): split standard input and pipe into a command
xinput(1): utility to configure and test X input devices
xnecview(1): A program for visualizing NEC2 input and output files
xprompt(1): prompt a user for input
xs_inproc(7): local in-process (inter-thread) transport
xs_poll(3): input/output multiplexing
xte(1): Generates fake input using the XTest extension
xymonpage.cgi(1), xymonpage(1): Utility to show a webpage using header and footer
xymonproxy(8): Xymon message proxy
ydotool(1): command-line /dev/uinput automation tool
yodlmanpage(7): Yodl(cqs `manpage(cq document type
yyref(1): generate cross-reference for yacc input
zfs-allow(8): delegate ZFS administration permissions to unprivileged users
zmq_inproc(7): 0MQ local in-process (inter-thread) communication transport
zmq_poll(3): input/output multiplexing
zmq_poller(3): input/output multiplexing
AMF::Perl::IO::InputStream(3): AMF::Perl::IO::InputStream
Algorithm::BinPack(3): efficiently pack items into bins
AnyEvent::Subprocess::Job::Delegate::MonitorHandle(3): monitor a handle for input and invoke callbacks with that input
Apache::Session::Serialize::Sybase(3): Use Storable to zip up persistent data and unpack/pack to put into Sybase-compatible image field
Apache::TestRunPHP(3): configure and run a PHP-based test suite
Apache::TestRunPerl(3): Run mod_perl-requiring Test Suite
App::DSC::DataTool::Input(3): Base class for input formats
App::DSC::DataTool::Input::DAT(3): DSC DAT input
App::DSC::DataTool::Input::XML(3): DSC XML input
App::DSC::DataTool::Inputs(3): Input module factory
App::Genpass(3): Quickly and easily create secure passwords
App::cpanminus(3): get, unpack, build and install modules from CPAN
App::cpanminus::fatscript(3), cpanm(3): get, unpack build and install modules from CPAN
Asm::Preproc::Lexer(3): Iterator to split input in tokens
Asm::Preproc::Line(3): One line of text retrieved from the input
Asm::Preproc::Token(3): One token retrieved from the input
Astro::Catalog::IO::Cluster(3): Input/Output in ARK Cluster format
Astro::Catalog::IO::Simple(3): Simple Input/Output format
Astro::Catalog::IO::VOTable(3): VOTable Input/Output format
Astro::MoonPhase(3): Information about the phase of the Moon
Biber::Input::file::biblatexml(3): look in a BibLaTeXML file for an entry and create it if found
Biber::Input::file::bibtex(3): look in a BibTeX file for an entry and create it if found
Bio::AlignIO::arp(3): ARP MSA Sequence input/output stream
Bio::AlignIO::bl2seq(3): bl2seq sequence input/output stream
Bio::AlignIO::clustalw(3): clustalw sequence input/output stream
Bio::AlignIO::fasta(3): fasta MSA Sequence input/output stream
Bio::AlignIO::largemultifasta(3): Largemultifasta MSA Sequence input/output stream
Bio::AlignIO::maf(3): Multiple Alignment Format sequence input stream
Bio::AlignIO::mase(3): mase sequence input/output stream
Bio::AlignIO::meme(3): meme sequence input/output stream
Bio::AlignIO::metafasta(3): Metafasta MSA Sequence input/output stream
Bio::AlignIO::msf(3): msf sequence input/output stream
Bio::AlignIO::nexus(3): NEXUS format sequence input/output stream
Bio::AlignIO::pfam(3): pfam sequence input/output stream
Bio::AlignIO::phylip(3): PHYLIP format sequence input/output stream
Bio::AlignIO::po(3): po MSA Sequence input/output stream
Bio::AlignIO::proda(3): proda sequence input/output stream This provides the basic capabilities to parse the output alignments from the ProDA multiple sequence alignment program (http://proda.stanford.edu)
Bio::AlignIO::prodom(3): prodom sequence input/output stream
Bio::AlignIO::selex(3): selex sequence input/output stream
Bio::AlignIO::xmfa(3): XMFA MSA Sequence input/output stream
Bio::ClusterIO::dbsnp(3): dbSNP input stream
Bio::ClusterIO::unigene(3): UniGene input stream
Bio::DB::GenPept(3): Database object interface to GenPept
Bio::Phylo::Unparsers::Abstract(3): Superclass for unparsers used by Bio::Phylo::IO
Bio::Phylo::Unparsers::Adjacency(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Cdao(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Fasta(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Figtree(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Hennig86(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Html(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Json(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Mrp(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Newick(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Nexml(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Nexus(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Nhx(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Nwmsrdf(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Pagel(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Phylip(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Phyloxml(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Rss1(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::Phylo::Unparsers::Taxlist(3): Serializer used by Bio::Phylo::IO, no serviceable parts inside
Bio::SeqFeature::PositionProxy(3): handle features when truncation/revcom sequences span a feature
Bio::SeqIO::MultiFile(3): Treating a set of files as a single input stream
Bio::SeqIO::ace(3): ace sequence input/output stream
Bio::SeqIO::asciitree(3): asciitree sequence input/output stream
Bio::SeqIO::bsml(3): BSML sequence input/output stream
Bio::SeqIO::bsml_sax(3): BSML sequence input/output stream using SAX
Bio::SeqIO::embl(3): EMBL sequence input/output stream
Bio::SeqIO::embldriver(3): EMBL sequence input/output stream
Bio::SeqIO::fasta(3): fasta sequence input/output stream
Bio::SeqIO::fastq(3): fastq sequence input/output stream
Bio::SeqIO::gbxml(3): GenBank sequence input/output stream using SAX
Bio::SeqIO::gcg(3): GCG sequence input/output stream
Bio::SeqIO::genbank(3): GenBank sequence input/output stream
Bio::SeqIO::interpro(3): InterProScan XML input/output stream
Bio::SeqIO::kegg(3): KEGG sequence input/output stream
Bio::SeqIO::locuslink(3): LocusLink input/output stream
Bio::SeqIO::mbsout(3): input stream for output by Teshima et al.'s mbs
Bio::SeqIO::metafasta(3): metafasta sequence input/output stream
Bio::SeqIO::msout(3): input stream for output by Hudson's ms
Bio::SeqIO::phd(3): phd file input/output stream
Bio::SeqIO::pir(3): PIR sequence input/output stream
Bio::SeqIO::qual(3): .qual file input/output stream
Bio::SeqIO::raw(3): raw sequence file input/output stream
Bio::SeqIO::scf(3): .scf file input/output stream
Bio::SeqIO::seqxml(3): SeqXML sequence input/output stream
Bio::SeqIO::swiss(3): Swissprot sequence input/output stream
Bio::SeqIO::tab(3): nearly raw sequence file input/output stream. Reads/writes id"et"sequence"en"
Bio::SeqIO::table(3): sequence input/output stream from a delimited table
Bio::SeqIO::tigr(3): TIGR XML sequence input/output stream
Bio::Tools::Primer3(3): Create input for and work with the output from the program primer3
Bio::Tools::Run::Primer3(3): Create input for and work with the output from the program primer3
Bio::Variation::IO::flat(3): flat file sequence variation input/output stream
Bio::Variation::IO::xml(3): XML sequence variation input/output stream
Bio::Variation::SNP(3): submitted SNP
Boulder::Stream(3): Read and write tag/value data from an input stream
Boulder::XML(3): XML format input/output for Boulder streams
Brannigan(3): Comprehensive, flexible system for validating and parsing input, mainly targeted at web applications
Brannigan::Examples(3): Example schemes, input and output for Brannigan
CGI::Untaint(3): process CGI input parameters
CGI::Untaint::object(3): base class for Input Handlers
CPANPLUS(3): API & CLI access to the CPAN mirrors
CPANPLUS::Backend(3): programmer's interface to CPANPLUS
CPANPLUS::Backend::RV(3): return value objects
CPANPLUS::Config(3): configuration defaults and heuristics for CPANPLUS
CPANPLUS::Config::HomeEnv(3): Set the environment for the CPANPLUS base dir
CPANPLUS::Configure(3): configuration for CPANPLUS
CPANPLUS::Dist(3): base class for plugins
CPANPLUS::Dist::Autobundle(3): distribution class for installation snapshots
CPANPLUS::Dist::Base(3): Base class for custom distribution classes
CPANPLUS::Dist::Build(3): CPANPLUS plugin to install packages that use Build.PL
CPANPLUS::Dist::Build::Constants(3): Constants for CPANPLUS::Dist::Build
CPANPLUS::Dist::MM(3): distribution class for MakeMaker related modules
CPANPLUS::Dist::Sample(3): -- Sample code to create your own Dist::* plugin
CPANPLUS::Error(3): error handling for CPANPLUS
CPANPLUS::FAQ(3): CPANPLUS Frequently Asked Questions
CPANPLUS::Hacking(3): developing CPANPLUS
CPANPLUS::Internals(3): CPANPLUS internals
CPANPLUS::Internals::Extract(3): internals for archive extraction
CPANPLUS::Internals::Fetch(3): internals for fetching files
CPANPLUS::Internals::Report(3): internals for sending test reports
CPANPLUS::Internals::Search(3): internals for searching for modules
CPANPLUS::Internals::Source(3): internals for updating source files
CPANPLUS::Internals::Source::Memory(3): In memory implementation n .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" Subsection "$cb->__memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" This method retrieves a storabled tree identified by $name. It takes the following arguments: "name" 4 Item "name" The internal name for the source file to retrieve. "uptodate" 4 Item "uptodate" A flag indicating whether the file-cache is up-to-date or not. "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns a tree on success, false on failure. n .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" Subsection "$cb->__memory_save_source([verbose => BOOL, path => $path])" This method saves all the parsed trees in storabled format if Storable is available. It takes the following arguments: "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns true on success, false on failure
CPANPLUS::Internals::Source::SQLite(3): SQLite implementation
CPANPLUS::Internals::Utils(3): convenience functions for CPANPLUS
CPANPLUS::Module(3): CPAN module objects for CPANPLUS
CPANPLUS::Module::Author(3): CPAN author object for CPANPLUS
CPANPLUS::Module::Author::Fake(3): dummy author object for CPANPLUS
CPANPLUS::Module::Checksums(3): checking the checksum of a distribution
CPANPLUS::Module::Fake(3): fake module object for internal use
CPANPLUS::Selfupdate(3): self-updating for CPANPLUS
CPANPLUS::Shell(3): base class for CPANPLUS shells
CPANPLUS::Shell::Classic(3): CPAN.pm emulation for CPANPLUS
CPANPLUS::Shell::Default(3): the default CPANPLUS shell
CPANPLUS::Shell::Default::Plugins::CustomSource(3): add custom sources to CPANPLUS
CPANPLUS::Shell::Default::Plugins::HOWTO(3): -- documentation on how to write your own plugins
CPANPLUS::Shell::Default::Plugins::Remote(3): connect to a remote CPANPLUS
CPANPLUS::Shell::Default::Plugins::Source(3): read in CPANPLUS commands
Chemistry::File::Mopac(3): MOPAC 6 input file reader/writer
Class::Workflow::Transition::Validate(3): Provide a hook for validating a transition (conditionals, input validators, etc)
Crypt::OpenPGP(3): Pure-Perl OpenPGP implementation
Crypt::OpenPGP::Armour(3): ASCII Armouring and Unarmouring
Crypt::OpenPGP::Buffer(3): Binary in/out buffer
Crypt::OpenPGP::CFB(3): PGP Cipher Feedback Mode
Crypt::OpenPGP::Certificate(3): PGP Key certificate
Crypt::OpenPGP::Cipher(3): PGP symmetric cipher factory
Crypt::OpenPGP::Ciphertext(3): Encrypted data packet
Crypt::OpenPGP::Compressed(3): Compressed data packets
Crypt::OpenPGP::Constants(3): Exportable constants
Crypt::OpenPGP::Digest(3): PGP message digest factory
Crypt::OpenPGP::ErrorHandler(3): Crypt::OpenPGP error handling
Crypt::OpenPGP::Key(3): OpenPGP key factory
Crypt::OpenPGP::KeyBlock(3): Key block object
Crypt::OpenPGP::KeyRing(3): Key ring object
Crypt::OpenPGP::KeyServer(3): Interface to HKP keyservers
Crypt::OpenPGP::MDC(3): MDC (modification detection code) packet
Crypt::OpenPGP::Marker(3): PGP Marker packet
Crypt::OpenPGP::Message(3): Sequence of PGP packets
Crypt::OpenPGP::OnePassSig(3): One-Pass Signature packet
Crypt::OpenPGP::PacketFactory(3): Parse and save PGP packet streams
Crypt::OpenPGP::Plaintext(3): A plaintext, literal-data packet
Crypt::OpenPGP::S2k(3): String-to-key generation
Crypt::OpenPGP::SKSessionKey(3): Symmetric-Key Encrypted Session Key
Crypt::OpenPGP::SessionKey(3): Encrypted Session Key
Crypt::OpenPGP::Signature(3): Signature packet
Crypt::OpenPGP::Trust(3): PGP Trust packet
Crypt::OpenPGP::UserID(3): PGP User ID packet
Crypt::OpenPGP::Util(3): Miscellaneous utility functions
Crypt::OpenPGP::Words(3): Create English-word encodings
Curses::Forms::Dialog::Input(3): Curses Forms Input Dialog
DBIx::Class::EncodedColumn::Crypt::OpenPGP(3): Encrypt columns using Crypt::OpenPGP
Dancer2::DeprecationPolicy(3): Define the process by which
Dancer::Plugin::ValidationClass(3): Centralized Input Validation For Dancer
Dancer::Serializer::JSONP(3): serializer for handling JSONP data
Data::FormValidator(3): Validates user input (usually from an HTML form) based on input profile
Data::FormValidator::Constraints(3): Basic sets of constraints on input profile
Data::FormValidator::Results(3): results of form input validation
Data::IEEE754(3): Pack and unpack big-endian IEEE754 floats and doubles
Data::MessagePack::Unpacker(3): (DEPRECATED)messagepack streaming deserializer
Data::Unixish::cat(3): Pass input unchanged
Data::Unixish::sprintf(3): Apply sprintf() on input
DateTime::Locale::ne_NP(3): Locale data examples for the Nepali Nepal (ne-NP) locale
Devel::REPL::Plugin::History(3): Keep track of all input, provide shortcuts !1, !-1
Devel::REPL::Plugin::Nopaste(3): #nopaste to upload session's input and output
Dist::Zilla::Role::VersionProvider(3): something that provides a version number for the dist
DocSet::Source::HTML(3), "DocSet::Source::HTML"(3): A class for parsing input document in the HTML format
DocSet::Source::POD(3), "DocSet::Source::POD"(3): A class for parsing input document in the POD format
DocSet::Source::Text(3), "DocSet::Source::Text"(3): A class for parsing input document in the text format
DtEditorGetInsertionPosition(3): retrieve the position of the insert cursor in a DtEditor widget
DtEditorSetInsertionPosition(3): set the position of the insert cursor in a DtEditor widget
Encoding::FixLatin(3): takes mixed encoding input and produces UTF-8 output
Event(3), Win(3), eventfmt(3), newwin(3), pipetowin(3), pipewinto(3), sysrun(3), winaddr(3), winclosefiles(3), winctl(3), windel(3), windeleteall(3), windows(3), wineventchan(3), winfd(3), winfree(3), winmread(3), winname(3), winopenfd(3), winprint(3), winread(3), winreadaddr(3), winreadevent(3), winseek(3), winwrite(3), winwriteevent(3): acme client library
ExtUtils::Typemaps::InputMap(3): Entry in the INPUT section of a typemap
File::GlobMapper(3): Extend File Glob to Allow Input and Output Files
File::Inplace(3): Perl module for in-place editing of files
File::Slurp::WithinPolicy(3): Applies filesystem policies to File::Slurp
Games::LMSolve::Input(3): input class for LM-Solve
Gantry::Plugins::Validate(3), Gantry::Plugin::Validate(3): Validates input values
Gantry::Utils::Validate(3): Validates input values
Glib::GenPod(3): POD generation utilities for Glib-based modules
Goo::Thing::js::JSFunctionProfileOption(3), JSFunctionProfileOption(3): Handle simple Jumps to matching strings for example
GraphQL::Role::FieldsInput(3): GraphQL object role implementing input fields
GraphQL::Role::Input(3): GraphQL object role
GraphQL::Type::InputObject(3): GraphQL input object type
Gtk2::InputDialog(3): wrapper for GtkInputDialog
Gtk2::PrintOperationPreview(3): wrapper for GtkPrintOperationPreview
HTML::DOM::Element::Input(3): A Perl class for representing 'input' elements in an HTML DOM tree
HTML::FormFu::Constraint(3): Constrain User Input
HTML::FormFu::Exception::Input(3): Input exception
HTML::FormFu::Role::Element::Input(3): Role for input fields
HTML::FormHandler::Field::Minute(3): input range from 0 to 59
HTML::FormHandler::Field::TextArea(3): textarea input
HTML::Shakan::Field::Input(3): <input /> field
HTTP::Headers::ActionPack(3): HTTP Action, Adventure and Excitement
HTTP::Headers::ActionPack::AcceptCharset(3): A Priority List customized for Media Types
HTTP::Headers::ActionPack::AcceptLanguage(3): A Priority List customized for Media Types
HTTP::Headers::ActionPack::AuthenticationInfo(3): The Authentication-Info Header
HTTP::Headers::ActionPack::Authorization(3): The Authorization Header factory
HTTP::Headers::ActionPack::Authorization::Basic(3): The Basic Authorization Header
HTTP::Headers::ActionPack::Authorization::Digest(3): The Digest Authorization Header
HTTP::Headers::ActionPack::ContentNegotiation(3): A class to handle content negotiation
HTTP::Headers::ActionPack::Core::Base(3): A Base class
HTTP::Headers::ActionPack::Core::BaseAuthHeader(3): The base Auth Header
HTTP::Headers::ActionPack::Core::BaseHeaderList(3): A Base Header List
HTTP::Headers::ActionPack::Core::BaseHeaderType(3): A Base header type
HTTP::Headers::ActionPack::Core::BaseHeaderWithParams(3): A Base header type with parameters
HTTP::Headers::ActionPack::DateHeader(3): A Date Header
HTTP::Headers::ActionPack::LinkHeader(3): A Link
HTTP::Headers::ActionPack::LinkList(3): A List of Link objects
HTTP::Headers::ActionPack::MediaType(3): A Media Type
HTTP::Headers::ActionPack::MediaTypeList(3): A Priority List customized for Media Types
HTTP::Headers::ActionPack::PriorityList(3): A Priority List
HTTP::Headers::ActionPack::Util(3): General Utility module
HTTP::Headers::ActionPack::WWWAuthenticate(3): The WWW-Authenticate Header
IO::AIO(3): Asynchronous/Advanced Input/Output
IO::Prompt(3): Interactively prompt for user input
IO::Prompt::Simple(3): provide a simple user input
IO::Prompt::Tiny(3): Prompt for user input with a default option
IO::Prompter(3): Prompt for input, read it, clean it, return it
IPC::Run3(3): run a subprocess with input/ouput redirection
Input::Validator(3): Input Validator
Input::Validator::Bulk(3): Internal object for multiple fields processing
Input::Validator::Condition(3): Condition object
Input::Validator::Constraint(3): Basic condition class
Input::Validator::Constraint::Callback(3): Callback constraint
Input::Validator::Constraint::Date(3): Date constraint
Input::Validator::Constraint::Email(3): Email constraint
Input::Validator::Constraint::Equal(3): Equal constraint
Input::Validator::Constraint::In(3): In constraint
Input::Validator::Constraint::Ip(3): Ip constraint
Input::Validator::Constraint::Length(3): Length constraint
Input::Validator::Constraint::Regexp(3): Regexp constraint
Input::Validator::Constraint::Subset(3): Subset constraint
Input::Validator::Constraint::Time(3): Time constraint
Input::Validator::Constraint::Unique(3): Unique constraint
Input::Validator::ConstraintBuilder(3): Constraint factory
Input::Validator::Field(3): Field object
Input::Validator::Group(3): Run constraint on group of fields
JMX::Jmx4Perl::Agent::Jolokia::Verifier::OpenPGPVerifier(3): Verifies PGP signature with Crypt::OpenPGP
JSON::Path::Evaluator(3): A module that recursively evaluates JSONPath expressions with native support for Javascript-style filters
Jifty::Web::Form::Field(3): Web input of some sort
KinoSearch1::Analysis::LCNormalizer(3): convert input to lower case
LaTeXML::Core::Mouth(3), "LaTeXML::Core::Mouth"(3): tokenize the input
LaTeXML::Core::Mouth::file(3), "LaTeXML::Core::Mouth::file"(3): tokenize the input from a file
LaTeXML::Core::Mouth::http(3), "LaTeXML::Core::Mouth::http"(3): tokenize the input from http
LaTeXML::Core::Mouth::https(3), "LaTeXML::Core::Mouth::https"(3): tokenize the input from https
LaTeXML::Util::Pack(3), "LaTeXML::Util::Pack"(3): smart packing and unpacking of TeX archives
List::Util::WeightedRoundRobin(3): Creates a list based on weighted input
MCE::Core::Input::Generator(3): Sequence of numbers (for task_id > 0)
MCE::Core::Input::Handle(3): File path and Scalar reference input reader
MCE::Core::Input::Iterator(3): Iterator reader
MCE::Core::Input::Request(3): Array reference and Glob reference input reader
MCE::Core::Input::Sequence(3): Sequence of numbers (for task_id == 0)
MPI_Type_get_envelope(3): Returns information about input arguments associated with a data type
MPI_Unpack(3): Unpacks a datatype into contiguous memory
MPI_Unpack_external(3): Reads data from a portable format
MPI_Unpublish_name(3): Unpublishes a service name
Mail::DKIM::AuthorDomainPolicy(3): represents an Author Domain Signing Practices (ADSP) record
Marpa::Advanced::Models(3): Other Input Models
Marpa::PP::Advanced::Models(3): Other Input Models
Marpa::XS::Advanced::Models(3): Other Input Models
Maypole::Model::CDBI::FromCGI(3), Maypole::Model:CDBI::FromCGI(3): Validate form input and populate Model objects
ModPerl::PerlRunPrefork(3): Run unaltered CGI scripts under mod_perl
MogileFS::ReplicationPolicy(3): base class for file replication policies
MogileFS::ReplicationPolicy::MultipleDevices(3): -- bare-bones replication policy
MogileFS::ReplicationPolicy::MultipleHosts(3): -- default replication policy
MogileFS::ReplicationPolicy::Union(3): -- satisfy 2 or more replication policies
Mojolicious::Plugin::SetUserGroup(3): Mojolicious plugin to set unprivileged credentials
Net::DNS::RR::OPENPGPKEY(3): DNS OPENPGPKEY resource record
Net::Nmsg::Input(3): Perl interface for nmsg inputs
Net::SNPP(3): Simple Network Pager Protocol Client
Net::STOMP::Client::IO(3): Input/Output support for Net::STOMP::Client
Net::UPnP(3): Perl extension for UPnP
Net::UPnP::AV::Container(3): Perl extension for UPnP
Net::UPnP::AV::Content(3): Perl extension for UPnP
Net::UPnP::AV::Item(3): Perl extension for UPnP
Net::UPnP::AV::MediaRenderer(3): Perl extension for UPnP
Net::UPnP::AV::MediaServer(3): Perl extension for UPnP
Net::UPnP::ActionResponse(3): Perl extension for UPnP
Net::UPnP::ControlPoint(3): Perl extension for UPnP control point
Net::UPnP::Device(3): Perl extension for UPnP
Net::UPnP::GW::Gateway(3): Perl extension for UPnP
Net::UPnP::HTTP(3): Perl extension for UPnP
Net::UPnP::HTTPResponse(3): Perl extension for UPnP
Net::UPnP::QueryResponse(3): Perl extension for UPnP
Net::UPnP::Service(3): Perl extension for UPnP
Ocsinventory::Agent::Common(3): give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
PAR::Filter(3): Input filter for PAR
PDL::LinPred(3), PDL::Filter::LinPred(3): Linear predictive filtering
POE::Filter::Map(3): transform input and/or output within a filter stack
POE::Watcher::Input(3): watch a socket or other handle for input readiness
POE::Wheel::Curses(3): non-blocking input for Curses
Params::Check(3): A generic input parsing/checking mechanism
Paranoid::Input(3): Paranoid input functions
Paws::AutoScaling::DescribeTerminationPolicyTypes(3): Arguments for method DescribeTerminationPolicyTypes on Paws::AutoScaling
Paws::CloudWatchLogs::DeleteRetentionPolicy(3): Arguments for method DeleteRetentionPolicy on Paws::CloudWatchLogs
Paws::CloudWatchLogs::PutDestinationPolicy(3): Arguments for method PutDestinationPolicy on Paws::CloudWatchLogs
Paws::CloudWatchLogs::PutRetentionPolicy(3): Arguments for method PutRetentionPolicy on Paws::CloudWatchLogs
Paws::CodeDeploy::AddTagsToOnPremisesInstances(3): Arguments for method AddTagsToOnPremisesInstances on Paws::CodeDeploy
Paws::CodeDeploy::BatchGetOnPremisesInstances(3): Arguments for method BatchGetOnPremisesInstances on Paws::CodeDeploy
Paws::CodeDeploy::DeregisterOnPremisesInstance(3): Arguments for method DeregisterOnPremisesInstance on Paws::CodeDeploy
Paws::CodeDeploy::GetOnPremisesInstance(3): Arguments for method GetOnPremisesInstance on Paws::CodeDeploy
Paws::CodeDeploy::ListOnPremisesInstances(3): Arguments for method ListOnPremisesInstances on Paws::CodeDeploy
Paws::CodeDeploy::RegisterOnPremisesInstance(3): Arguments for method RegisterOnPremisesInstance on Paws::CodeDeploy
Paws::CodeDeploy::RemoveTagsFromOnPremisesInstances(3): Arguments for method RemoveTagsFromOnPremisesInstances on Paws::CodeDeploy
Paws::EC2::AssignPrivateIpAddresses(3): Arguments for method AssignPrivateIpAddresses on Paws::EC2
Paws::EC2::UnassignPrivateIpAddresses(3): Arguments for method UnassignPrivateIpAddresses on Paws::EC2
Paws::EMR::SetTerminationProtection(3): Arguments for method SetTerminationProtection on Paws::EMR
Paws::IAM::CreateLoginProfile(3): Arguments for method CreateLoginProfile on Paws::IAM
Paws::IAM::DeleteLoginProfile(3): Arguments for method DeleteLoginProfile on Paws::IAM
Paws::IAM::GetLoginProfile(3): Arguments for method GetLoginProfile on Paws::IAM
Paws::IAM::UpdateLoginProfile(3): Arguments for method UpdateLoginProfile on Paws::IAM
Paws::RedShift::ModifySnapshotCopyRetentionPeriod(3): Arguments for method ModifySnapshotCopyRetentionPeriod on Paws::RedShift
Pegex::Input(3): Pegex Parser Input Abstraction
Perl::Critic::Exception::IO(3): A problem with input or output
Perl::Critic::Policy::InputOutput::ProhibitBacktickOperators(3): Discourage stuff like "@files = `ls $directory`"
Perl::Critic::Policy::InputOutput::ProhibitBarewordFileHandles(3): Write "open my $fh, q{<}, $filename;" instead of "open FH, q{<}, $filename;"
Perl::Critic::Policy::InputOutput::ProhibitExplicitStdin(3): Use "<>" or "<ARGV>" or a prompting module instead of "<STDIN>"
Perl::Critic::Policy::InputOutput::ProhibitInteractiveTest(3): Use prompt() instead of -t
Perl::Critic::Policy::InputOutput::ProhibitJoinedReadline(3): Use "local $/ = undef" or Path::Tiny instead of joined readline
Perl::Critic::Policy::InputOutput::ProhibitOneArgSelect(3): Never write "select($fh)"
Perl::Critic::Policy::InputOutput::ProhibitReadlineInForLoop(3): Write "while( $line = <> ){...}" instead of "for(<>){...}"
Perl::Critic::Policy::InputOutput::ProhibitTwoArgOpen(3): Write "open $fh, q{<}, $filename;" instead of "open $fh, "<$filename";"
Perl::Critic::Policy::InputOutput::RequireBracedFileHandleWithPrint(3): Write "print {$FH} $foo, $bar;" instead of "print $FH $foo, $bar;"
Perl::Critic::Policy::InputOutput::RequireBriefOpen(3): Close filehandles as soon as possible after opening them
Perl::Critic::Policy::InputOutput::RequireCheckedClose(3): Write "my $error = close $fh;" instead of "close $fh;"
Perl::Critic::Policy::InputOutput::RequireCheckedOpen(3): Write "my $error = open $fh, $mode, $filename;" instead of "open $fh, $mode, $filename;"
Perl::Critic::Policy::InputOutput::RequireCheckedSyscalls(3): Return value of flagged function ignored
Perl::Critic::Policy::InputOutput::RequireEncodingWithUTF8Layer(3): Write "open $fh, q{<:encoding(UTF-8)}, $filename;" instead of "open $fh, q{<:utf8}, $filename;"
Perl::Critic::Policy::Miscellanea::TextDomainPlaceholders(3): check placeholder names in Locale::TextDomain calls
Perl::Critic::Policy::Subroutines::RequireArgUnpacking(3): Always unpack "@_" first
Plack::Middleware::JSONP(3): Wraps JSON response in JSONP if callback parameter is specified
Plack::Middleware::SocketIO::JSONPPolling(3): JSONPPolling transport
Plucene::Store::InputStream(3): a random-access input stream
PocketIO::Transport::JSONPPolling(3): JSONPPolling transport
Pod::Elemental::Element::Generic::Nonpod(3): a non-pod element in a Pod document
Pod::Elemental::Element::Pod5::Nonpod(3): a non-pod element in a Pod document
Pod::InputObjects(3): objects representing POD input paragraphs, commands, etc
Pod::Man(3): Convert POD data to formatted *roff input
Pod::Select(3), podselect()(3): extract selected sections of POD from input
Prima::Drawable::Glyphs(3): helper routines for bi-directional text input and complex scripts output
Prima::InputLine(3): standard input line widget
Prima::MsgBox(3): standard message and input dialog boxes
Prima::Sliders(3): sliding bars, spin buttons and input lines, dial widget etc
Proc::ProcessTable::Match::KernProc(3): Attempts to match the kernel processes
Reaction::Manual::ActionPrototypes(3): Changes to the Action Prototype Mechanism
Reaction::UI::Widget::Field::Mutable::File(3): A file input field
Reaction::UI::Widget::Field::Mutable::MatchingPasswords(3): Require double input of password
Reaction::UI::Widget::Field::Mutable::Password(3): A password input field
Reaction::UI::Widget::Field::Mutable::String(3): Simple string input field
Reaction::UI::Widget::Field::Mutable::Text(3): A multiline text input field
Reaction::UI::Widget::Field::Mutable::TimeRange(3): Input a time range
Reflex::Role::InStreaming(3): add streaming input behavior to a class
Reflex::Role::OutStreaming(3): add streaming input behavior to a class
Reply::Plugin::Hints(3): persists lexical hints across input lines
Reply::Plugin::ReadLine(3): use Term::ReadLine for user input
Rose::HTML::Form::Field::PhoneNumber::US(3): Text field that accepts only input that contains exactly 10 digits, and coerces valid input into US phone numbers in the form: 123-456-7890
Rose::HTML::Form::Field::Time(3): Text field that accepts only valid times and coerces valid input into HH:MM:SS AM/PM format
SOAP::GenericInputStream(3): Default handler for SOAP::Parser output
Search::Elasticsearch::Cxn::Factory(3): Used by CxnPools to create new Cxn instances
Search::Elasticsearch::CxnPool::Sniff(3): A CxnPool for connecting to a local cluster with a dynamic node list
Search::Elasticsearch::CxnPool::Static(3): A CxnPool for connecting to a remote cluster with a static list of nodes
Search::Elasticsearch::CxnPool::Static::NoPing(3): A CxnPool for connecting to a remote cluster without the ability to ping
Search::Elasticsearch::Role::CxnPool(3): Provides common functionality to the CxnPool implementations
Search::Elasticsearch::Role::CxnPool::Sniff(3): A CxnPool role for connecting to a local cluster with a dynamic node list
Search::Elasticsearch::Role::CxnPool::Static(3): A CxnPool role for connecting to a remote cluster with a static list of nodes
Search::Elasticsearch::Role::CxnPool::Static::NoPing(3): A CxnPool for connecting to a remote cluster without the ability to ping
Servlet::ServletInputStream(3): servlet input stream interface
Software::License::CC_BY_3_0(3): Creative Commons Attribution 3.0 Unported License (CC BY 3.0)
Software::License::CC_BY_NC_3_0(3): Creative Commons Attribution-NonCommercial 3.0 Unported License (CC BY-NC 3.0)
Software::License::CC_BY_NC_ND_3_0(3): Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License (CC BY-NC-ND 3.0)
Software::License::CC_BY_NC_SA_3_0(3): Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License (CC BY-NC-SA 3.0)
Software::License::CC_BY_ND_3_0(3): Creative Commons Attribution-NoDerivs 3.0 Unported License (CC BY-ND 3.0)
Software::License::CC_BY_SA_3_0(3): Creative Commons Attribution-ShareAlike 3.0 Unported License (CC BY-SA 3.0)
Term::RawInput(3): A simple drop-in replacement for <STDIN> in scripts with the additional ability to capture and return the non-standard keys like 'End', 'Escape' [ESC], 'Insert', etc
Test::Alien::CanPlatypus(3): Skip a test file unless FFI::Platypus is available
Test::DBIx::Class::Example::Schema::Result::GermanPhone(3): Example of virtual view
Test::DBIx::Class::Example::Schema::Result::RussianPhone(3): Example of non-virtual view
Text::Filter::Chain(3): object for chaining Text::Filter objects and running them sequentially, feeding the output of each filter to the input of the next one
Text::Filter::Cooked(3): Cooked reader for input files
Text::Pipe::Append(3): Pipe segment that appends text to input
Text::Pipe::Chomp(3): Pipe segment that chomps input
Text::Pipe::Chop(3): Pipe segment that chops input
Tk::InputO(3): Create and manipulate TIX InputO widgets
Tk::WinPhoto(3): Load a Photo image from a window
Tk::focus(3): Manage the input focus
UML::genericseq(3), genericseq.pl(3): generates xml sequence diagrams from various inputs
VCP::PodDESCRIPTIONParser(3): Parse DESCRIPTION sections from a set of source files
Visio(3): Perl extension mainpulating XML based Visio files
WSNotification::Interfaces::WSBaseNotificationSender::NotificationProducerPort(3): SOAP Interface for the WSBaseNotificationSender Web Service
WWW::Baseball::NPB(3): Fetches Japanese baseball games information
WWW::Baseball::NPB::Game(3): Japanese baseball game class
Workflow::Action::InputField(3): Metadata about information required by an Action
X11::Protocol::Ext::XTEST(3): synthetic user input and more
XBase::Base(3): Base input output module for XBase suite
XML::LibXML::InputCallback(3): XML::LibXML Class for Input Callbacks
Zenoss::Router::ZenPack(3): A JSON/ExtDirect interface to operations on ZenPacks
abspath(3), abspath()(3), absnpath()(3), absfpath()(3): Expands a relative pathname to a full (absolute) pathname
arxunpak(1): Extract the Arx Fatalis .pak files containing the game assets
bio(3), Bopen(3), Bfdopen(3), Binit(3), Binits(3), Brdline(3), Brdstr(3), Bgetc(3), Bgetrune(3), Bgetd(3), Bungetc(3), Bungetrune(3), Bread(3), Bseek(3), Boffset(3), Bfildes(3), Blinelen(3), Bputc(3), Bputrune(3), Bprint(3), Bvprint(3), Bwrite(3), Bflush(3), Bterm(3), Bbuffered(3): buffered input/output
bk-here(1), bk here(1): list or change the set of populated repositories bk populate - add one or more components to a nested collection bk unpopulate - remove one or more components to a nested collection
bk-unpull(1), bk unpull(1): remove changesets added by bk pull
bluecloth(1): convert Markdown input to HTML
bp_dbsplit(1): script to split an input set of database(s) into smaller pieces
bp_make_mrna_protein(1): Convert an input mRNA/cDNA sequence into protein
bp_nrdb(1), bp_nrdb.PLS(1): a script to emulate Warren Gish's nrdb, make a unique sequence database from a set of input databases
bt_input(1): input/parsing functions in btparse library
burst(1): Prepare shotline and burst point library inputs for PDAM
cacti_jmx4perl(1): Script for a Cacti Data Input Method
cadabra2cadabra(1): convert Cadabra2 notebooks to text input files
cadabra2python(1): convert Cadabra2 text input files to pure Python
certbot(1): certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.21.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
ck2cti(1): convert Chemkin-II-format mechanisms to Cantera input files (.cti)
ck2yaml(1): convert Chemkin-II-format mechanisms to Cantera YAML input files
config(7): More than you probably want to know about npm configuration
cpanm(1): get, unpack build and install modules from CPAN
cti2yaml(1): convert legacy CTI-format mechanisms to Cantera YAML input files
ctml2yaml(1): convert legacy CTML-format mechanisms to Cantera YAML input files
ctml_writer(1): process Cantera .cti input files
d.his(1), d.his (1): Displays the result obtained by combining hue, intensity, and saturation (HIS) values from user-specified input raster map layers
dtimsstart(1): launches an input method server
dtimsstartaction(5): XCDE input method server actions
folders(5): Folder Structures Used by npm
g.dirseps(1), g.dirseps (1): Internal GRASS utility for converting directory separator characters. Converts any directory separator characters in the input string to or from native host format, and writes the changed path to standard output. Useful in scripts for Windows compatibility
genericseq.pl(1): generates xml sequence diagrams from various inputs
genpass(1): Quickly and easily create secure passwords
getline(3), getline()(3): reads a line from standard input

i.cluster(1), i.cluster (1): Generates spectral signatures for land cover types in an image using a clustering algorithm. The resulting signature file is used as input for i.maxlik, to generate an unsupervised image classification
ifne(1): Run command if the standard input is not empty
inputplug(1): XInput event monitor
install(5): Download and install node and npm
ip(3), eipfmt(3), parseip(3), parseipmask(3), v4parseip(3), v4parsecidr(3), parseether(3), myipaddr(3), myetheraddr(3), maskip(3), equivip(3), defmask(3), isv4(3), v4tov6(3), v6tov4(3), nhgetl(3), nhgets(3), nhgetv(3), hnputl(3), hnputs(3), hnputv(3), ptclbsum(3), readipifc(3): Internet protocol
khttp_urldecode(3), khttp_urldecode_inplace(3): URL decoding for kcgi

knob(nged): Provides a method for simulating knob input. With no options, it will display the current values for the knobs
kutil_invalidate(3): invalidate a kcgi input pair
moreutils-ts(1), ts(1): timestamp input
npm(1): javascript package manager
npm-access(1): Set access level on published packages
npm-adduser(1): Add a registry user account
npm-audit(1): Run a security audit
npm-bin(1): Display npm bin folder
npm-bugs(1): Report bugs for a package in a web browser
npm-cache(1): Manipulates packages cache
npm-ci(1): Install a project with a clean slate
npm-completion(1): Tab Completion for npm
npm-config(1): Manage the npm configuration files
npm-dedupe(1): Reduce duplication in the package tree
npm-deprecate(1): Deprecate a version of a package
npm-diff(1): The registry diff command
npm-dist-tag(1): Modify package distribution tags
npm-docs(1): Open documentation for a package in a web browser
npm-doctor(1): Check your npm environment
npm-edit(1): Edit an installed package
npm-exec(1): Run a command from a local or remote npm package
npm-explain(1): Explain installed packages
npm-explore(1): Browse an installed package
npm-find-dupes(1): Find duplication in the package tree
npm-fund(1): Retrieve funding information
npm-help(1): Get help on npm
npm-help-search(1): Search npm help documentation
npm-hook(1): Manage registry hooks
npm-init(1): Create a package.json file
npm-install(1): Install a package
npm-install-ci-test(1): Install a project with a clean slate and run tests
npm-install-test(1): Install package(s) and run tests
npm-link(1): Symlink a package folder
npm-logout(1): Log out of the registry
npm-ls(1): List installed packages
npm-org(1): Manage orgs
npm-outdated(1): Check for outdated packages
npm-owner(1): Manage package owners
npm-pack(1): Create a tarball from a package
npm-ping(1): Ping npm registry
npm-pkg(1): Manages your package.json
npm-prefix(1): Display prefix
npm-profile(1): Change settings on your registry profile
npm-prune(1): Remove extraneous packages
npm-publish(1): Publish a package
npm-rebuild(1): Rebuild a package
npm-repo(1): Open package repository page in the browser
npm-restart(1): Restart a package
npm-root(1): Display npm root
npm-run-script(1): Run arbitrary package scripts
npm-search(1): Search for packages
npm-set-script(1): Set tasks in the scripts section of package.json
npm-shrinkwrap(1): Lock down dependency versions for publication
npm-shrinkwrap-json(5), npm-shrinkwrap.json(5): A publishable lockfile
npm-star(1): Mark your favorite packages
npm-stars(1): View packages marked as favorites
npm-start(1): Start a package
npm-stop(1): Stop a package
npm-team(1): Manage organization teams and team memberships
npm-test(1): Test a package
npm-token(1): Manage your authentication tokens
npm-uninstall(1): Remove a package
npm-unpublish(1): Remove a package from the registry
npm-unstar(1): Remove an item from your favorite packages
npm-update(1): Update packages
npm-version(1): Bump a package version
npm-view(1): View registry info
npm-whoami(1): Display npm username
npmrc(5): The npm config files
npx(1): Run a command from a local or remote npm package
open(3): perl pragma to set default PerlIO layers for input and output
p(1): browse or page through files and filter unprintable characters
package-json(5), package.json(5): Specifics of npm's package.json handling
pee(1): tee standard input to pipes
perlpacktut(1): tutorial on "pack" and "unpack"
pigz(1), unpigz(1): compress or expand files
plumb(3), eplumb(3), plumbfree(3), plumbopen(3), plumbunmount(3), plumbopenfid(3), plumbsend(3), plumbsendtofid(3), plumbsendtext(3), plumblookup(3), plumbpack(3), plumbpackattr(3), plumbaddattr(3), plumbdelattr(3), plumbrecv(3), plumbrecvfid(3), plumbunpack(3), plumbunpackpartial(3), plumbunpackattr(3), Plumbmsg (3): plumb messages
pod2man(1): Convert POD data to formatted *roff input
policytool(1): Reads and writes a plain text policy file based on user input through the utility GUI
prime(3), genprime(3), gensafeprime(3), genstrongprime(3), DSAprimes(3), probably_prime(3), smallprimetest (3): prime number generation
print(3), fprint(3), sprint(3), snprint(3), seprint(3), smprint(3), runesprint(3), runesnprint(3), runeseprint(3), runesmprint(3), vfprint(3), vsnprint(3), vseprint(3), vsmprint(3), runevsnprint(3), runevseprint(3), runevsmprint(3): print formatted output
pwi2xsf(1): convert the pw.x input file to XSF format
r.buildvrt(1), r.buildvrt (1): Build a VRT (Virtual Raster) from the list of input raster maps
r.cost(1), r.cost (1): Creates a raster map showing the cumulative cost of moving between different geographic locations on an input raster map whose cell category values represent cost
r.his(1), r.his (1): Generates red, green and blue (RGB) raster map layers combining hue, intensity and saturation (HIS) values from user-specified input raster map layers
r.horizon(1), r.horizon (1): Computes horizon angle height from a digital elevation model. The module has two different modes of operation: 1. Computes the entire horizon around a single point whose coordinates are given with the (cqcoord(cq option. The horizon height (in radians). 2. Computes one or more raster maps of the horizon height in a single direction. The input for this is the angle (in degrees), which is measured counterclockwise with east=0, north=90 etc. The output is the horizon height in radians
r.path(1), r.path (1): Traces paths from starting points following input directions
r.resamp.rst(1), r.resamp.rst (1): Reinterpolates and optionally computes topographic analysis from input raster map to a new raster map (possibly with different resolution) using regularized spline with tension and smoothing
r.series(1), r.series (1): Makes each output cell value a function of the values assigned to the corresponding cells in the input raster map layers
r.series.accumulate(1), r.series.accumulate (1): Makes each output cell value a accumulationfunction of the values assigned to the corresponding cells in the input raster map layers
r.series.interp(1), r.series.interp (1): Interpolates raster maps located (temporal or spatial) in between input raster maps at specific sampling positions
r.unpack(1), r.unpack (1): Imports a GRASS GIS specific raster archive file (packed with r.pack) as a raster map
r.walk(1), r.walk (1): Creates a raster map showing the anisotropic cumulative cost of moving between different geographic locations on an input raster map whose cell category values represent cost
read(1): read a line from standard input rst2man-indent-level 0 1 rstReportMargin \$1
read(1): read line of input into variables
readcons(1): prompt console for input
readcons(3): prompt console for input
release_handler(3): Unpacking and Installation of Release Packages
resolvepath(3), resolvepath()(3), resolvenpath()(3), resolvefpath()(3): resolve all symbolic links of a path name
run_erl(1): Redirect Erlang input and output streams on Unix systems
rw(1): blockwise input/output
scribe_cat.pl(1): Reads log messages from standard input and sends to a scribe instance
scripts(7): How npm handles the "scripts" field
sechash(3), md4(3), md5(3), sha1(3), hmac_md5(3), hmac_sha1(3), md5pickle(3), md5unpickle(3), sha1pickle(3), sha1unpickle(3): cryptographically secure hashes
shuf(1): randomly permute input lines
soelim(1): preprocess so inclusion commands in troff input
sponge(1): soak up standard input and write to a file
t.sample(1), t.sample (1): Samples the input space time dataset(s) with a sample space time dataset and print the result to stdout
thread(3), alt(3), chancreate(3), chanfree(3), chanprint(3), chansetname(3), mainstacksize(3), proccreate(3), procdata(3), recv(3), recvp(3), recvul(3), send(3), sendp(3), sendul(3), nbrecv(3), nbrecvp(3), nbrecvul(3), nbsend(3), nbsendp(3), nbsendul(3), threadcreate(3), threaddata(3), threadexec(3), threadexecl(3), threadexits(3), threadexitsall(3), threadgetgrp(3), threadgetname(3), threadint(3), threadintgrp(3), threadkill(3), threadkillgrp(3), threadmain(3), threadnotify(3), threadid(3), threadpid(3), threadpin(3), threadunpin(3), threadsetgrp(3), threadsetname(3), threadsetstate(3), threadspawn(3), threadspawnd(3), threadspawnl(3), threadwaitchan(3), yield(3): thread and proc management
tickit_term_input_check_timeout_msec(3): terminal timeout behaviour
tickit_term_input_push_bytes(3): supply more input data
tickit_term_input_readable(3): read more data from the terminal
tickit_term_input_wait_msec(3), tickit_term_input_wait_*(3): read more data from the terminal
tickit_term_open_stdio(3): create a terminal instance on standard input/output
tickit_term_set_input_fd(3), tickit_term_get_input_fd(3): manage terminal input
tickit_window(7), TickitWindow(7): a window for drawing operations and input
tickit_window_set_steal_input(3): control whether windows steal all input events
tickit_window_take_focus(3), tickit_window_is_focused(3): control the input focus
tstatd(1): Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
tttk_Xt_input_handler(3): Process ToolTalk events for Xt clients
ucsort(1): sort input records using the UCA
unifmt(1): wrap input paragraphs using the ULA
unpack200(1): Transforms a packed file produced by pack200(1) into a JAR file for web deployment
v.clip(1), v.clip (1): Extracts features of input map which overlay features of clip map
v.delaunay(1), v.delaunay (1): Creates a Delaunay triangulation from an input vector map containing points or centroids
v.lrs.label(1), v.lrs.label (1): Creates stationing from input lines, and linear reference system
v.lrs.segment(1), v.lrs.segment (1): Creates points/segments from input lines, linear reference system and positions read from stdin or a file
v.net.salesman(1), v.net.salesman (1): Creates a cycle connecting given nodes (Traveling salesman problem). Note that TSP is NP-hard, heuristic algorithm is used by this module and created cycle may be sub optimal
v.net.steiner(1), v.net.steiner (1): Creates Steiner tree for the network and given terminals. Note that (cqMinimum Steiner Tree(cq problem is NP-hard and heuristic algorithm is used in this module so the result may be sub optimal
v.parallel(1), v.parallel (1): Creates parallel line to input vector lines
v.segment(1), v.segment (1): Creates points/segments from input vector lines and positions
v.to.points(1), v.to.points (1): Creates points along input lines in new vector map with 2 layers
v.unpack(1), v.unpack (1): Imports a GRASS GIS specific vector archive file (packed with v.pack) as a vector map
v.voronoi(1), v.voronoi (1): Creates a Voronoi diagram constrained to the extents of the current region from an input vector map containing points or centroids
venti-fcall(3), VtEntry(3), VtFcall(3), VtRoot(3), vtentrypack(3), vtentryunpack(3), vtfcallclear(3), vtfcallfmt(3), vtfcallpack(3), vtfcallunpack(3), vtfromdisktype(3), vttodisktype(3), vtgetstring(3), vtputstring(3), vtrootpack(3), vtrootunpack(3), vtparsescore(3), vtscorefmt(3): venti data formats
voxelize(nged): Takes as input a primitive or a collection of primitives ,old_obj, and creates a region new_obj which is the collection of voxels(RPPs) approximating the old_obj
xenv(1): expand shell variables in input files
xpipe(1): split input and feed it into the given utility

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages