Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3)
- SNMP daemon loadable module interface
- ibv_get_async_event(3), ibv_ack_async_event(3)
- get or acknowledge asynchronous events
- ibv_get_cq_event(3), ibv_ack_cq_events(3)
- get and acknowledge completion queue (CQ) events
- AllPlanes(3), BlackPixel(3), WhitePixel(3), ConnectionNumber(3), DefaultColormap(3), DefaultDepth(3), XListDepths(3), DefaultGC(3), DefaultRootWindow(3), DefaultScreenOfDisplay(3), DefaultScreen(3), DefaultVisual(3), DisplayCells(3), DisplayPlanes(3), DisplayString(3), XMaxRequestSize(3), XExtendedMaxRequestSize(3), LastKnownRequestProcessed(3), NextRequest(3), ProtocolVersion(3), ProtocolRevision(3), QLength(3), RootWindow(3), ScreenCount(3), ScreenOfDisplay(3), ServerVendor(3), VendorRelease(3)
- Display macros and functions
- CURLINFO_COOKIELIST(3)
- get all known cookies
- CURLOPT_SSH_KEYFUNCTION(3)
- callback for known host matching logic
- CURLOPT_SSH_KNOWNHOSTS(3)
- file name holding the SSH known hosts
- Dpkg::Deps::KnownFacts(3perl)
- list of installed real and virtual packages
- MPIX_Comm_failure_ack(3)
- Acknowledge the current group of failed processes
- MPIX_Comm_failure_get_acked(3)
- Get the group of acknowledged failures
- MPI_Add_error_class(3)
- Add an MPI error class to the known classes
- SRP_create_verifier_ex(3ossl), SRP_create_verifier(3ossl), SRP_create_verifier_BN_ex(3ossl), SRP_create_verifier_BN(3ossl), SRP_check_known_gN_param(3ossl), SRP_get_default_gN(3ossl)
- SRP authentication primitives
- Sympa::Request::Handler::unknown(3Sympa)
- unknown request handler
- Tcl_AppendExportList.tcl85(3), Tcl_AppendExportList(3), Tcl_CreateNamespace(3), Tcl_DeleteNamespace(3), Tcl_Export(3), Tcl_FindCommand(3), Tcl_FindNamespace(3), Tcl_ForgetImport(3), Tcl_GetCurrentNamespace(3), Tcl_GetGlobalNamespace(3), Tcl_GetNamespaceUnknownHandler(3), Tcl_Import(3), Tcl_SetNamespaceUnknownHandler(3)
- manipulate namespaces
- Tcl_AppendExportList.tcl86(3), Tcl_AppendExportList(3), Tcl_CreateNamespace(3), Tcl_DeleteNamespace(3), Tcl_Export(3), Tcl_FindCommand(3), Tcl_FindNamespace(3), Tcl_ForgetImport(3), Tcl_GetCurrentNamespace(3), Tcl_GetGlobalNamespace(3), Tcl_GetNamespaceUnknownHandler(3), Tcl_Import(3), Tcl_SetNamespaceUnknownHandler(3)
- manipulate namespaces
- Tcl_AppendExportList.tcl87(3), Tcl_AppendExportList(3), Tcl_CreateNamespace(3), Tcl_DeleteNamespace(3), Tcl_Export(3), Tcl_FindCommand(3), Tcl_FindNamespace(3), Tcl_ForgetImport(3), Tcl_GetCurrentNamespace(3), Tcl_GetGlobalNamespace(3), Tcl_GetNamespaceUnknownHandler(3), Tcl_Import(3), Tcl_SetNamespaceUnknownHandler(3)
- manipulate namespaces
- Tcl_CreateEnsemble.tcl85(3), Tcl_CreateEnsemble(3), Tcl_FindEnsemble(3), Tcl_GetEnsembleFlags(3), Tcl_GetEnsembleMappingDict(3), Tcl_GetEnsembleNamespace(3), Tcl_GetEnsembleUnknownHandler(3), Tcl_GetEnsembleSubcommandList(3), Tcl_IsEnsemble(3), Tcl_SetEnsembleFlags(3), Tcl_SetEnsembleMappingDict(3), Tcl_SetEnsembleSubcommandList(3), Tcl_SetEnsembleUnknownHandler(3)
- manipulate ensemble commands
- Tcl_CreateEnsemble.tcl86(3), Tcl_CreateEnsemble(3), Tcl_FindEnsemble(3), Tcl_GetEnsembleFlags(3), Tcl_GetEnsembleMappingDict(3), Tcl_GetEnsembleNamespace(3), Tcl_GetEnsembleParameterList(3), Tcl_GetEnsembleUnknownHandler(3), Tcl_GetEnsembleSubcommandList(3), Tcl_IsEnsemble(3), Tcl_SetEnsembleFlags(3), Tcl_SetEnsembleMappingDict(3), Tcl_SetEnsembleParameterList(3), Tcl_SetEnsembleSubcommandList(3), Tcl_SetEnsembleUnknownHandler(3)
- manipulate ensemble commands
- Tcl_CreateEnsemble.tcl87(3), Tcl_CreateEnsemble(3), Tcl_FindEnsemble(3), Tcl_GetEnsembleFlags(3), Tcl_GetEnsembleMappingDict(3), Tcl_GetEnsembleNamespace(3), Tcl_GetEnsembleParameterList(3), Tcl_GetEnsembleUnknownHandler(3), Tcl_GetEnsembleSubcommandList(3), Tcl_IsEnsemble(3), Tcl_SetEnsembleFlags(3), Tcl_SetEnsembleMappingDict(3), Tcl_SetEnsembleParameterList(3), Tcl_SetEnsembleSubcommandList(3), Tcl_SetEnsembleUnknownHandler(3)
- manipulate ensemble commands
- XSetSelectionOwner(3), XGetSelectionOwner(3), XConvertSelection(3)
- manipulate window selection
- aarch64-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- aarch64-unknown-freebsd13.0-g++6(1), gcc(1)
- GNU project C and C++ compiler
- aarch64-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- aarch64-unknown-freebsd13.0-gcc6(1), gcc(1)
- GNU project C and C++ compiler
- aarch64-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- aarch64-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- aarch64-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- aarch64-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
- offline gcda profile processing tool
- aarch64-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- aarch64-unknown-freebsd13.0-gcov6(1), gcov(1)
- coverage testing tool
- aarch64-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- aarch64-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- aarch64-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- ackinfo.cgi(1)
- Xymon CGI script to acknowledge alerts
- acknowledge.cgi(1)
- Xymon CGI script to acknowledge alerts
- al_acknowledge_drawing_halt(3)
- Allegro 5 API
- al_acknowledge_drawing_resume(3)
- Allegro 5 API
- al_acknowledge_resize(3)
- Allegro 5 API
- allneeded(1)
- force the calculation of all fonts now needed
- astconvertt(1), ConvertType(1)
- convert known data types to each other
- axfer(1)
- command-line sound recorder and player for sound devices and nodes supported by Linux sound subsystem (Advanced Linux Sound Architecture, also known as ALSA)
- bedup(8)
- deduplication program with additional knowledge of burp
- centerim(1)
- a text mode based IM client for Linux, *BSD, Sun Solaris, MacOS X and possibly, other Unices. ICQ2000, Yahoo!, AIM TOC, IRC, MSN, Gadu-Gadu and Jabber protocols are now supported. Internal LiveJournal client and RSS reader are also provided
- coap_resource(3), coap_resource_init(3), coap_resource_unknown_init(3), coap_resource_proxy_uri_init(3), coap_add_resource(3), coap_delete_resource(3), coap_resource_set_mode(3), coap_resource_set_userdata(3), coap_resource_get_userdata(3)
- Work with CoAP resources
- databases(5)
- the known set of GNATS databases
- dpkg-maintscript-helper(1)
- works around known dpkg limitations in maintainer scripts
- easside-ng(8)
- an auto-magic tool which allows you to communicate via an WEP-encrypted AP without knowing the key
- fuzzyflakes(6)
- falling snowflakes/flower shapes
- geography(3), REarth(3), SetREarth(3), BadAngle(3), AngleIsOK(3), AngleIsBad(3), AngleFmDeg(3), AngleToDeg(3), AngleFmRad(3), AngleToRad(3), ISin(3), ICos(3), GeoPtSetDeg(3), GeoPtSetRad(3), GeoPtGetDeg(3), GeoPtGetRad(3), GeoPtIsSomewhere(3), GeoPtIsNowhere(3), GeoPtNowhere(3), MapPtIsSomewhere(3), MapPtIsNowhere(3), MapPtNowhere(3), ScaleMapPt(3), GeoStep(3), GeoDistance(3), GeoQuickDistance(3), Azimuth(3), GCircleX(3), DomainLat(3), DomainLon(3), GwchLon(3), DomainLonPt(3), GwchLonPt(3), LonCmp(3), LatCmp(3), AngleCmp(3), LonBtwn(3), LonBtwn1(3), Rotation(3), NewRotation(3), SetRotation(3), GetRotation(3), DeleteRotation(3), Rotate(3), GeoTime_CalSet(3), GeoTime_JulSet(3), GeoTime_CalToJul(3), GeoTime_JulToCal(3), GeoTime_Incr(3), GeoTime_Cmp(3), GeoTime_Diff(3)
- basic geographic calculations and comparisons
- git-bug-bridge-auth(1)
- List all known bridge authentication credentials
- git-secret-whoknows(1)
- prints email-labels for each key in the keyring
- git-ssnoq(1)
- display a status summary for files known to a Git repository
- gmx-chi(1)
- Calculate everything you want to know about chi and other dihedrals rst2man-indent-level 0 1 rstReportMargin \$1
- gnutls_anon_set_server_known_dh_params(3)
- API function
- gnutls_certificate_set_known_dh_params(3)
- API function
- gnutls_pkcs11_crt_is_known(3)
- API function
- gnutls_psk_set_server_known_dh_params(3)
- API function
- gnutls_x509_dn_oid_known(3)
- API function
- humount(1)
- remove an HFS volume from the list of known volumes
- hypnowheel(6)
- draws overlapping, translucent spiral patterns
- i386-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- i386-unknown-freebsd13.0-g++6(1), gcc(1)
- GNU project C and C++ compiler
- i386-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- i386-unknown-freebsd13.0-gcc6(1), gcc(1)
- GNU project C and C++ compiler
- i386-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- i386-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- i386-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- i386-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
- offline gcda profile processing tool
- i386-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- i386-unknown-freebsd13.0-gcov6(1), gcov(1)
- coverage testing tool
- i386-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- i386-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- i386-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- i7z(1)
- A better i7 (and now i3, i5) reporting tool
- iv_now(3), iv_validate_now(3), iv_invalidate_now(3)
- ivykis time handling
- kdrill(1), kdrill v6.2(1)
- drill program for kanji chars under Xwindows (X11R5 or better is required to run) kdrill also does dictionary lookup Yikes.. this man-page is getting huge. But I am a great believer in having proper documentation. Hopefully, this new format will help instead of hinder. At some future point in time, I shall convert this huge beast to HTML. But that point is not now. [Although actually, you CAN go to http://www.bolthole.com/kdrill/ for some help ] TIP: "/WORD" usually takes you to the next occurrence of "WORD", if you are viewing this using a "man"-like program
- knet_host_get_host_list(3)
- Get a list of hosts known to knet
- ldns_rdf2buffer_str_a(3), ldns_rdf2buffer_str_aaaa(3), ldns_rdf2buffer_str_str(3), ldns_rdf2buffer_str_b64(3), ldns_rdf2buffer_str_hex(3), ldns_rdf2buffer_str_type(3), ldns_rdf2buffer_str_class(3), ldns_rdf2buffer_str_alg(3), ldns_rdf2buffer_str_loc(3), ldns_rdf2buffer_str_unknown(3), ldns_rdf2buffer_str_nsap(3), ldns_rdf2buffer_str_wks(3), ldns_rdf2buffer_str_nsec(3), ldns_rdf2buffer_str_period(3), ldns_rdf2buffer_str_tsigtime(3), ldns_rdf2buffer_str_apl(3), ldns_rdf2buffer_str_int16_data(3), ldns_rdf2buffer_str_int16(3), ldns_rdf2buffer_str_ipseckey(3)
- lower level to string conversion functions
- libssh2_knownhost_add(3)
- add a known host
- libssh2_knownhost_check(3)
- check a host+key against the list of known hosts
- libssh2_knownhost_checkp(3)
- check a host+key against the list of known hosts
- libssh2_knownhost_del(3)
- delete a known host entry
- libssh2_knownhost_free(3)
- free a collection of known hosts
- libssh2_knownhost_get(3)
- get a known host off the collection of known hosts
- libssh2_knownhost_init(3)
- init a collection of known hosts
- libssh2_knownhost_readfile(3)
- parse a file of known hosts
- libssh2_knownhost_readline(3)
- read a known host line
- libssh2_knownhost_writefile(3)
- write a collection of known hosts to a file
- libssh2_knownhost_writeline(3)
- convert a known host to a line for storage
- lightning-listnodes(7)
- Command to get the list of nodes in the known network
- magicrescue(1)
- Scans a block device and extracts known file types by looking at magic bytes
- makepp_signatures(1)
- -- How makepp knows when files have changed
- makeppinfo(1)
- -- What makepp knows about files
- mf(1), inimf(1), mf-nowin(1)
- Metafont, a language for font and logo design
- mips-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- mips-unknown-freebsd13.0-g++6(1), gcc(1)
- GNU project C and C++ compiler
- mips-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- mips-unknown-freebsd13.0-gcc6(1), gcc(1)
- GNU project C and C++ compiler
- mips-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- mips-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- mips-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- mips-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
- offline gcda profile processing tool
- mips-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- mips-unknown-freebsd13.0-gcov6(1), gcov(1)
- coverage testing tool
- mips-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- mips-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- mips-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- mips64-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- mips64-unknown-freebsd13.0-g++6(1), gcc(1)
- GNU project C and C++ compiler
- mips64-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- mips64-unknown-freebsd13.0-gcc6(1), gcc(1)
- GNU project C and C++ compiler
- mips64-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- mips64-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- mips64-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- mips64-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
- offline gcda profile processing tool
- mips64-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- mips64-unknown-freebsd13.0-gcov6(1), gcov(1)
- coverage testing tool
- mips64-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- mips64-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- mips64-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- nikto(1)
- Scan web server for known vulnerabilities
- now(3)
- get current time
- nuke(8)
- launch nuclear weapons at known sites
- oggz-known-codecs(1)
- List codecs known by this version of Oggz
- panda_nowdate(3)
- return the string for now
- panda_setlinecap(3)
- sets the line cap for the lines we are drawing now
- physicalunits(1)
- encodes and de-codes physical units a according to ISO/IEEE 11073-10101:2004 Tables A6.1 and A6.3 physicalunits was formerly also known under "pu"
- pkcs11-register(1)
- Simple tool to install PKCS#11 modules to known applications
- pkg-audit(8), pkg audit(8)
- audit installed packages against known vulnerabilities
- powerpc-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- powerpc-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- powerpc-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- powerpc-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- powerpc-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- powerpc-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- powerpc-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- powerpc-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- powerpc64-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- powerpc64-unknown-freebsd13.0-g++6(1), gcc(1)
- GNU project C and C++ compiler
- powerpc64-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- powerpc64-unknown-freebsd13.0-gcc6(1), gcc(1)
- GNU project C and C++ compiler
- powerpc64-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- powerpc64-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- powerpc64-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- powerpc64-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
- offline gcda profile processing tool
- powerpc64-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- powerpc64-unknown-freebsd13.0-gcov6(1), gcov(1)
- coverage testing tool
- powerpc64-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- powerpc64-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- powerpc64-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- powerpc64le-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- powerpc64le-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- powerpc64le-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- psfpages(1)
- list codepages known to the PSF Tools
- pwned-check(1)
- Check word against list of known stolen passwords
- qconfirm-check-mid(1)
- checks headers of a mail message for known references
- quiz(6)
- random knowledge tests
- reset_target(3), reset_target (3)
- Request that a target resets to a known starting state
- riscv32-unknown-elf-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- riscv32-unknown-elf-g++(1), gcc(1)
- GNU project C and C++ compiler
- riscv32-unknown-elf-gcc(1), gcc(1)
- GNU project C and C++ compiler
- riscv32-unknown-elf-gcov(1), gcov(1)
- coverage testing tool
- riscv32-unknown-elf-gcov-dump(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- riscv32-unknown-elf-gcov-tool(1), gcov-tool(1)
- offline gcda profile processing tool
- riscv32-unknown-elf-windmc(1), windmc(1)
- generates Windows message resources
- riscv32-unknown-elf-windres(1), windres(1)
- manipulate Windows resources
- riscv64-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- riscv64-unknown-freebsd13.0-g++(1), gcc(1)
- GNU project C and C++ compiler
- riscv64-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- riscv64-unknown-freebsd13.0-gcc(1), gcc(1)
- GNU project C and C++ compiler
- riscv64-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- riscv64-unknown-freebsd13.0-gcov(1), gcov(1)
- coverage testing tool
- riscv64-unknown-freebsd13.0-gcov-dump(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- riscv64-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- riscv64-unknown-freebsd13.0-gcov-tool(1), gcov-tool(1)
- offline gcda profile processing tool
- riscv64-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- riscv64-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- riscv64-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- riscv64-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- s390x-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- s390x-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- s390x-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- sane(7)
- Scanner Access Now Easy: API for accessing scanners
- seq2(1)
- A clone of unix known program called "seq"
- sg_unmap(8)
- send SCSI UNMAP command (known as 'trim' in ATA specs)
- shishi_generalize_now(3)
- API function
- shishi_tkt_valid_now_p(3)
- API function
- silk(7), SiLK(7)
- the System for Internet-Level Knowledge
- snowflake-client(1)
- WebRTC pluggable transport client for Tor
- snowflake-proxy(1)
- WebRTC pluggable transport proxy for Tor
- sparc64-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- sparc64-unknown-freebsd13.0-g++6(1), gcc(1)
- GNU project C and C++ compiler
- sparc64-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- sparc64-unknown-freebsd13.0-gcc6(1), gcc(1)
- GNU project C and C++ compiler
- sparc64-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- sparc64-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- sparc64-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- sparc64-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
- offline gcda profile processing tool
- sparc64-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- sparc64-unknown-freebsd13.0-gcov6(1), gcov(1)
- coverage testing tool
- sparc64-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- sparc64-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- sparc64-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- sss_ssh_knownhostsproxy(1)
- get OpenSSH host keys
- tai_now(3)
- get current time
- tai_now(3)
- get current time, with 1-second precision
- taia_now(3)
- get current time
- taia_now(3)
- get current time, with 1-attosecond precision
- tpm_clear(8)
- return the TPM to the default state (unowned, disabled, inactive)
- unknown-horizons(6)
- real-time strategy/simulation game
- unknown.tcl85(n), unknown(n)
- Handle attempts to use non-existent commands
- unknown.tcl86(n), unknown(n)
- Handle attempts to use non-existent commands
- unknown.tcl87(n), unknown(n)
- Handle attempts to use non-existent commands
- unknownpleasures(6)
- a waterfall graph of the signal from pulsar PSR B1919+21
- uuname(1)
- list known remote UUCP sites
- whatnow(1)
- prompting front-end for writing nmh messages
- whatnow2(1)
- front-end for handling drafts
- x86_64-unknown-freebsd13.0-dlltool(1), dlltool(1)
- create files needed to build and use DLLs
- x86_64-unknown-freebsd13.0-g++6(1), gcc(1)
- GNU project C and C++ compiler
- x86_64-unknown-freebsd13.0-g++9(1), gcc(1)
- GNU project C and C++ compiler
- x86_64-unknown-freebsd13.0-gcc6(1), gcc(1)
- GNU project C and C++ compiler
- x86_64-unknown-freebsd13.0-gcc9(1), gcc(1)
- GNU project C and C++ compiler
- x86_64-unknown-freebsd13.0-gcov-dump6(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- x86_64-unknown-freebsd13.0-gcov-dump9(1), gcov-dump(1)
- offline gcda and gcno profile dump tool
- x86_64-unknown-freebsd13.0-gcov-tool6(1), gcov-tool(1)
- offline gcda profile processing tool
- x86_64-unknown-freebsd13.0-gcov-tool9(1), gcov-tool(1)
- offline gcda profile processing tool
- x86_64-unknown-freebsd13.0-gcov6(1), gcov(1)
- coverage testing tool
- x86_64-unknown-freebsd13.0-gcov9(1), gcov(1)
- coverage testing tool
- x86_64-unknown-freebsd13.0-windmc(1), windmc(1)
- generates Windows message resources
- x86_64-unknown-freebsd13.0-windres(1), windres(1)
- manipulate Windows resources
- xsnow(6)
- Snow and Santa on your desktop
- xymon-mailack(8)
- permit acknowledging alerts via e-mail
- AI::Categorizer::KnowledgeSet(3)
- Encapsulates set of documents
- AI::Prolog::KnowledgeBase(3)
- The Prolog database
- Algorithm::Evolutionary::Individual::Base(3)
- Base class for chromosomes that knows how to build them, and has some helper methods
- Alien::Build::Plugin::Prefer::BadVersion(3)
- Plugin to filter out known bad versions
- Alien::Build::Plugin::Prefer::GoodVersion(3)
- Plugin to filter known good versions
- Bio::NEXUS::UnknownBlock(3)
- Represents a simple object for storing information unrecognized blocks by the Bio::NEXUS module
- Blog::Spam::Plugin::00blacklist(3)
- Reject comments from known-bad IP addresses
- Blog::Spam::Plugin::badip(3)
- Reject comments from known-bad IP addresses
- Blog::Spam::Plugin::stopwords(3)
- Reject comments which contain known-bad words
- Chemistry::Pattern::Atom(3)
- An atom that knows how to match
- Chemistry::Pattern::Bond(3)
- A bond that knows how to match
- Class::Workflow::Transition::Deterministic(3)
- A transition which knows which state it leads to
- Convert::BinHex(3)
- extract data from Macintosh BinHex files ALPHA WARNING: this code is currently in its Alpha release. Things may change drastically until the interface is hammered out: if you have suggestions or objections, please speak up now!
- DBIx::Class::Storage::DBI::Replicated::Introduction(3)
- Minimum Need to Know
- DJabberd::Component::Node(3)
- Specialization of DJabberd::Agent::Node that knows it belongs to a component
- Dancer::RPCPlugin::ErrorResponse(3)
- Interface to pass error-responses without knowlage of the protocol
- Data::Remember::Class(3)
- remember complex information without giving yourself a headache, now with POOP!
- DateTime::Locale::und(3)
- Locale data examples for the Unknown language (und) locale
- Email::Sender::Manual::QuickStart(3)
- how to start using Email::Sender right now
- Gtk2::Ex::PodViewer(3)
- a Gtk2 widget for displaying Plain old Documentation (POD). NB: This module used to be called Gtk2::PodViewer. That module is now a stub that points to this module
- HTML::FormFu::Filter::FormatNumber(3)
- Convert a formatted number from a known locale
- Image::ExifTool::Unknown(3)
- Unknown EXIF maker notes tags
- Image::Sane(3)
- Perl extension for the SANE (Scanner Access Now Easy) Project
- JMX::Jmx4Perl::Product::Unknown(3)
- Fallback handler
- Jifty::DateTime(3)
- a DateTime subclass that knows about Jifty users
- Lingua::Ispell(3), Lingua::Ispell.pm(3)
- a module encapsulating access to the Ispell program. Note: this module was previously known as Text::Ispell; if you have Text::Ispell installed on your system, it is now obsolete and should be replaced by Lingua::Ispell
- Lingua::Stem::Snowball(3)
- Perl interface to Snowball stemmers
- Lingua::Stem::Snowball::Da(3)
- Porters stemming algorithm for Denmark
- Lingua::Stem::Snowball::No(3)
- Porters stemming algorithm for Norwegian
- Lingua::Stem::Snowball::Se(3)
- Porters stemming algorithm for Swedish
- Locale::Recode::_Conversions(3)
- Internal Table of Known Conversions
- MDOM::Rule(3)
- DOM Unknown Node for Makefiles
- Mail::DKIM::Canonicalization::nowsp(3)
- nowsp canonicalization
- Module::Build::Platform::Default(3)
- Stub class for unknown platforms
- MongoDB::UnacknowledgedResult(3)
- MongoDB unacknowledged result object
- MooX::StrictConstructor(3)
- Make your Moo-based object constructors blow up on unknown attributes
- MooseX::StrictConstructor(3)
- Make your object constructors blow up on unknown attributes
- MouseX::StrictConstructor(3)
- Make your object constructors blow up on unknown attributes
- Net::Amazon::Validate::Type(3), Net::Amazon::Validate(3)
- Validate user supplied options against known valid options
- Net::DBus::Binding::Bus(3)
- Handle to a well-known message bus instance
- Net::DNS::Check::Test::unknown(3)
- Unknown Test
- Net::DNS::ToolKit::RR::TYPE(3)
- Unknown Resource Record Handler
- Net::EPP::Frame::Command::Poll::Ack(3)
- an instance of Net::EPP::Frame::Command for the EPP "<Poll>" acknowledge command
- Net::GPSD3::Return::Unknown(3)
- Net::GPSD3 Return Base Class
- Net::GPSD3::Return::Unknown::Timestamp(3)
- Net::GPSD3 Return Base Class with Timestamp
- Net::SSH2::KnownHosts(3)
- SSH 2 knownhosts object
- PPI::Statement::Unknown(3)
- An unknown or transient statement
- PPI::Structure::Unknown(3)
- An unknown or unresolved brace structure
- PPI::Token::Unknown(3)
- Token of unknown or as-yet undetermined type
- PPIx::QuoteLike::Token::Unknown(3)
- An unknown token
- PPIx::Regexp::Node::Unknown(3)
- Represent an unknown node
- PPIx::Regexp::Structure::Unknown(3)
- Represent an unknown structure
- PPIx::Regexp::Token::CharClass::POSIX::Unknown(3)
- Represent an unknown or unsupported POSIX character class
- PPIx::Regexp::Token::Unknown(3)
- Represent an unknown token
- Paws::CodePipeline::AcknowledgeJob(3)
- Arguments for method AcknowledgeJob on Paws::CodePipeline
- Paws::CodePipeline::AcknowledgeThirdPartyJob(3)
- Arguments for method AcknowledgeThirdPartyJob on Paws::CodePipeline
- Paws::StorageGateway::UpdateGatewaySoftwareNow(3)
- Arguments for method UpdateGatewaySoftwareNow on Paws::StorageGateway
- Perl::Critic::Policy::Bangs::ProhibitNoPlan(3)
- Know what you're going to test
- Perl::Critic::Policy::TestingAndDebugging::ProhibitNoWarnings(3)
- Prohibit various flavors of "no warnings"
- Perl::Critic::Policy::ValuesAndExpressions::ProhibitUnknownBackslash(3)
- don't use undefined backslash forms
- Plucene::Plugin::Analyzer::SnowballAnalyzer(3)
- Stemmed analyzer with Lingua::Stem::Snowball and Lingua::StopWords
- Plucene::Plugin::Analyzer::SnowballFilter(3)
- Snowball stemming on the token stream
- Promises::Cookbook::GentleIntro(3)
- All you need to know about Promises
- Sane(3)
- Perl extension for the SANE (Scanner Access Now Easy) Project
- Search::OpenFTS::Dict::Snowball(3), Wrapper for Lingua::Stem::Snowball(3)
- Perl interface to Snowball stemmers
- Search::OpenFTS::Dict::UnknownDict(3)
- The dictionary of unknown words
- Search::Xapian::Stem(3)
- Snowball stemmer
- Sisimai::Lhost::X4(3)
- bounce mail parser class for Unknown MTA which is developed as a "qmail" clone
- Sisimai::Lhost::X5(3)
- bounce mail parser class for unknown MTA #5
- Sisimai::Reason::HostUnknown(3)
- Bounce reason is "hostunknown" or not
- Sisimai::Reason::UserUnknown(3)
- Bounce reason is "userunknown" or not
- String::RewritePrefix(3)
- rewrite strings based on a set of known prefixes
- TAP::Parser::Result::Unknown(3)
- Unknown result token
- Test2::Plugin::NoWarnings(3)
- Fail if tests warn
- Test::Group::NoWarnings(3)
- turn warnings into test failures
- Test::MockDateTime(3)
- mock DateTime->now calls during tests
- Test::NoWarnings(3)
- Make sure you didn't emit any warnings while testing
- Test::TAP::Model::Colorful(3)
- Creates color from something that knows it's success ratio
- Test::TAP::Model::Visual(3)
- A result set that will create ::Visual children, and knows it's color
- XML::RSS::LibXML::Namespaces(3)
- Utility Catalog For Known Namespacee
- bk-features(1), bk features(1)
- display features used or known
- certbot(1)
- certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.21.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
- config(7)
- More than you probably want to know about npm configuration
- fish-completions(1)
- Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
- fish-for-bash-users(1)
- A quick fish primer for those coming from bash This is to give you a quick overview if you come from bash (or to a lesser extent other shells like zsh or ksh) and want to know how fish differs. Fish is intentionally not POSIX-compatible and as such some of the things you are used to work differently. Many things are similar - they both fundamentally expand commandlines to execute commands, have pipes, redirections, variables, globs, use command output in various ways. This document is there to quickly show you the differences
-
-
- mindforger(1)
- easily view, navigate and manage your knowledge and/or Markdown files
- perlbs2000(1)
- building and installing Perl for BS2000. This document needs to be updated, but we don't know what it should say. Please submit comments to <https://github.com/Perl/perl5/issues>
- perlos400(1)
- Perl version 5 on OS/400 This document needs to be updated, but we don't know what it should say. Please submit comments to <https://github.com/Perl/perl5/issues>
- perltru64(1)
- Perl version 5 on Tru64 (formerly known as Digital UNIX formerly known as DEC OSF/1) systems
- r.patch(1), r.patch (1)
- Creates a composite raster map layer by using known category values from one (or more) map layer(s) to fill in areas of (dqno data(dq in another map layer
- schema2example(1)
- convert XML schema knowledge into Perl or XML examples