Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
kvm_native(3)
is a kvm descriptor opened on a native kernel image
pcap_is_swapped(3)
find out whether a savefile has the native byte order
zfsprops(7)
native and user-defined properties of ZFS datasets
BN_bn2binpad(3ossl), BN_bn2bin(3ossl), BN_bin2bn(3ossl), BN_bn2lebinpad(3ossl), BN_lebin2bn(3ossl), BN_bn2nativepad(3ossl), BN_native2bn(3ossl), BN_bn2hex(3ossl), BN_bn2dec(3ossl), BN_hex2bn(3ossl), BN_dec2bn(3ossl), BN_print(3ossl), BN_print_fp(3ossl), BN_bn2mpi(3ossl), BN_mpi2bn(3ossl)
format conversions
CURLOPT_FTP_ALTERNATIVE_TO_USER(3)
command to use instead of USER with FTP
CURLOPT_HTTP200ALIASES(3)
specify alternative matches for HTTP 200 OK
CURLOPT_REQUEST_TARGET(3)
specify an alternative target for this request
Nativeint(3o)
Processor-native integers
Tcl_AllocStatBuf.tcl85(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_TranslateFileName.tcl85(3), Tcl_TranslateFileName(3)
convert file name to native form and replace tilde with home directory
Tcl_TranslateFileName.tcl86(3), Tcl_TranslateFileName(3)
convert file name to native form and replace tilde with home directory
Tcl_TranslateFileName.tcl87(3), Tcl_TranslateFileName(3)
convert file name to native form and replace tilde with home directory
al_append_native_text_log(3)
Allegro 5 API
al_close_native_text_log(3)
Allegro 5 API
al_create_native_file_dialog(3)
Allegro 5 API
al_destroy_native_file_dialog(3)
Allegro 5 API
al_get_allegro_native_dialog_version(3)
Allegro 5 API
al_get_native_file_dialog_count(3)
Allegro 5 API
al_get_native_file_dialog_path(3)
Allegro 5 API
al_get_native_text_log_event_source(3)
Allegro 5 API
al_init_native_dialog_addon(3)
Allegro 5 API
al_is_native_dialog_addon_initialized(3)
Allegro 5 API
al_open_native_text_log(3)
Allegro 5 API
al_show_native_file_dialog(3)
Allegro 5 API
al_show_native_message_box(3)
Allegro 5 API
al_shutdown_native_dialog_addon(3)
Allegro 5 API
alpine(1)
an Alternatively Licensed Program for Internet News and Email
amsuntar(8)
Amanda Application to interface with native tar utility available on solaris platforms
camlp5(1)
Pre-Precessor-Pretty-Printer for ocaml mkcamlp5 - Create custom camlp5 mkcamlp5.opt - Create custom camlp5 (native code) ocpp5 - Universal preprocessor
coqtop.opt(1)
The native-code Coq toplevel
cvc4(5)
the native input language for CVC4
dblink_build_sql_insert(3)
builds an INSERT statement using a local tuple, replacing the primary key field values with alternative supplied values
dblink_build_sql_update(3)
builds an UPDATE statement using a local tuple, replacing the primary key field values with alternative supplied values
doveadm-altmove(1)
Move matching mails to the alternative storage (dbox-only)
elinks(1)
lynx-like alternative character mode WWW browser
fgviewer(1)
An alternative FlightGear viewer application
fi_poll(3)
Polling and wait set operations fi_poll_open / fi_close Open/close a polling set fi_poll_add / fi_poll_del Add/remove a completion queue or counter to/from a poll set. fi_poll Poll for progress and events across multiple completion queues and counters. fi_wait_open / fi_close Open/close a wait set fi_wait Waits for one or more wait objects in a set to be signaled. fi_trywait Indicate when it is safe to block on wait objects using native OS calls. fi_control Control wait set operation or attributes
git-citool(1)
Graphical alternative to git-commit
git-subrepo(1), Header "Name" git-subrepo(1)
Git Submodule Alternative
gnutls_x509_crt_set_subject_alternative_name(3)
API function
img-sgi(n)
Img, SGI Native Format (sgi)
ldns_native2rdf_int8(3), ldns_native2rdf_int16(3), ldns_native2rdf_int32(3), ldns_native2rdf_int16_data(3), ldns_rdf2native_int8(3), ldns_rdf2native_int16(3), ldns_rdf2native_int32(3), ldns_rdf2native_sockaddr_storage(3), ldns_rdf2native_time_t(3)
rdf numeric conversion functions
links(1)
lynx-like alternative character mode WWW browser
mcpp(1)
Matsui CPP, an alternative C preprocessor
metalog(8)
an alternative syslog daemon
mono(1)
Mono's ECMA-CLI native code generator (Just-in-Time and Ahead-of-Time)
mount.glusterfs(8)
script to mount native GlusterFS volume
mp3splt(1), oggsplt(1), flacsplt(1)
utility for mp3, ogg vorbis and native flac splitting without decoding
mwhois.conf(5)
alternative WHOIS servers list for mwhois client
nn_recvmsg(3)
fine-grained alternative to nn_recv
nn_sendmsg(3)
fine-grained alternative to nn_send
ocamlopt(1)
The OCaml native-code compiler
pamaltsat(1)
increase or decrease the saturation of an image using one of several alternative methods. synopsis
parallel_alternatives(7)
Alternatives to GNU parallel
pas2jni(1)
Free Pascal Java Native Interface generation tool
pcap_is_swapped(3)
find out whether a savefile has the native byte order
pcre2api(3), PCRE2(3)
Perl-compatible regular expressions (revised API) #include <pcre2.h> PCRE2 is a new API for PCRE, starting at release 10.0. This document contains a description of all its native functions. See the pcre2 document for an overview of all the PCRE2 documentation
provider-object(7ossl)
A specification for a provider-native object abstraction
unicode_u_ucs4_native(3), unicode_u_ucs2_native(3), unicode_convert_init(3), unicode_convert(3), unicode_convert_deinit(3), unicode_convert_tocbuf_init(3), unicode_convert_tou_init(3), unicode_convert_fromu_init(3), unicode_convert_uc(3), unicode_convert_tocbuf_toutf8_init(3), unicode_convert_tocbuf_fromutf8_init(3), unicode_convert_toutf8(3), unicode_convert_fromutf8(3), unicode_convert_tobuf(3), unicode_convert_tou_tobuf(3), unicode_convert_fromu_tobuf(3)
unicode character set conversion
uniconv(1)
convert text to native formats through unicode
update-alternatives(1)
maintain symbolic links determining default commands
waffle_config(3), waffle_config_choose(3), waffle_config_destroy(3), waffle_config_get_native(3)
class waffle_config
waffle_context(3), waffle_context_create(3), waffle_context_destroy(3), waffle_context_get_native(3)
class waffle_context
waffle_display(3), waffle_display_connect(3), waffle_display_disconnect(3), waffle_display_supports_context_api(3), waffle_display_get_native(3)
class waffle_display
waffle_gbm(3), waffle_gbm_display(3), waffle_gbm_config(3), waffle_gbm_context(3), waffle_gbm_window(3)
Containers for underlying native GBM objects
waffle_glx(3), waffle_glx_display(3), waffle_glx_config(3), waffle_glx_context(3), waffle_glx_window(3)
Containers for underlying native GLX objects
waffle_native(3), waffle_native_display(3), waffle_native_config(3), waffle_native_context(3), waffle_native_window(3)
Containers for underlying native objects
waffle_wayland(3), waffle_wayland_display(3), waffle_wayland_config(3), waffle_wayland_context(3), waffle_wayland_window(3)
Containers for underlying native Wayland objects
waffle_window(3), waffle_window_create(3), waffle_window_destroy(3), waffle_window_show(3), waffle_window_swap_buffers(3), waffle_window_get_native(3)
class waffle_window
waffle_x11_egl(3), waffle_x11_egl_display(3), waffle_x11_egl_config(3), waffle_x11_egl_context(3), waffle_x11_egl_window(3)
Containers for underlying native X11/EGL objects
zfsprops(7)
native and user-defined properties of ZFS datasets
Bio::Tools::OddCodes(3)
Object holding alternative alphabet coding for one protein sequence
CGI::Session::Driver::DBI(3)
Base class for native DBI-related CGI::Session drivers
CSS::Sass::Value(3)
Data Types for custom Sass Functions n .SH "Mapping ""Sass_Values"" to perl data structures" .SH "Mapping Sass_Values to perl data structures" Header "Mapping Sass_Values to perl data structures" You can use maps and lists like normal hash or array references. Lists can have two different separators used for stringification. This is detected by checking if the object is derived from CSS::Sass::Value::List::Space. The default is a comma separated list, which you get by instantiating CSS::Sass::Value::List or CSS::Sass::Value::List::Comma. my $null = CSS::Sass::Value->new(undef); # => null my $number = CSS::Sass::Value->new(42.35); # => 42.35 my $string = CSS::Sass::Value->new("foobar"); # => foobar my $map = CSS::Sass::Value->new({ key => "foobar" }); # key: foobar my $list = CSS::Sass::Value->new([ "foo", 42, "bar" ]); # foo, 42, bar my $space = CSS::Sass::Value::List::Space->new("foo", "bar"); # foo bar my $comma = CSS::Sass::Value::List::Comma->new("foo", "bar"); # foo, bar You can also return these native perl types from custom functions. They will automatically be upgraded to real CSS::Sass::Value objects. All types overload the stringify and eq operators (so far)
Carp(3)
alternative warn and die for modules
Clone::Fast(3)
Natively copying Perl data structures
Clone::More(3)
Natively copying Perl data structures
DBIx::DBSchema::DBD::Oracle(3)
Oracle native driver for DBIx::DBSchema
DBIx::DBSchema::DBD::Pg(3)
PostgreSQL native driver for DBIx::DBSchema
DBIx::DBSchema::DBD::SQLite(3)
SQLite native driver for DBIx::DBSchema
DBIx::DBSchema::DBD::mysql(3)
MySQL native driver for DBIx::DBSchema
DBIx::SQLEngine::Driver::Trait::NoSequences(3)
For databases without native sequences
Data::Integer(3)
details of the native integer data type
Data::Perl::Bool::MooseLike(3)
data::Perl::Bool subclass that simulates Moose's native traits
Data::Perl::Collection::Array::MooseLike(3)
Collection::Array subclass that simulates Moose's native traits
Data::Perl::Collection::Hash::MooseLike(3)
Collection::Hash subclass that simulates Moose's native traits
Data::Perl::Number::MooseLike(3)
data::Perl::Number subclass that simulates Moose's native traits
Data::Perl::String::MooseLike(3)
data::Perl::String subclass that simulates Moose's native traits
Encode::MIME::EncWords(3)
-- MIME 'B' and 'Q' header encoding (alternative)
File::Find::Object::Rule(3)
Alternative interface to File::Find::Object
File::Find::Rule(3)
Alternative interface to File::Find
File::Spec::Native(3)
Use native OS implementation of File::Spec from a subclass
HTML::PullParser(3)
Alternative HTML::Parser interface
HTML::TokeParser(3)
Alternative HTML::Parser interface
Hash::Case::Upper(3)
native hash with enforced lower cased keys
IPC::Open3::Simple(3)
A simple alternative to IPC::Open3
Importer(3)
Alternative but compatible interface to modules that export symbols
JMX::Jmx4Perl::Agent::Jolokia::Verifier::GnuPGVerifier(3)
Verifies PGP signature with a natively installed GnuPG (with gpg found in the path)
JSON::Path::Evaluator(3)
A module that recursively evaluates JSONPath expressions with native support for Javascript-style filters
List::Objects::WithUtils::Autobox(3)
Native data types WithUtils
Log::Agent::File::Native(3)
low-overhead IO::File
MCE::Grep(3)
Parallel grep model similar to the native grep function
MCE::Map(3)
Parallel map model similar to the native map function
Mail::Box::FastScalar(3)
fast alternative to IO::Scalar
Math::Int64::native_if_available(3)
Use the native Perl 64-bit integer implementation when available
MooX::HandlesVia(3)
NativeTrait-like behavior for Moo
MooX::Traits::Util(3)
non-role alternative to MooX::Traits
Moose::Autobox(3)
Autoboxed wrappers for Native Perl datatypes
Moose::Manual::Roles(3)
Roles, an alternative to deep hierarchies and base classes
Moose::Meta::Attribute::Native(3)
Delegate to native Perl types
Moose::Meta::Attribute::Native::Trait(3)
Shared role for native delegation traits
Moose::Meta::Attribute::Native::Trait::Array(3)
Helper trait for ArrayRef attributes
Moose::Meta::Attribute::Native::Trait::Bool(3)
Helper trait for Bool attributes
Moose::Meta::Attribute::Native::Trait::Code(3)
Helper trait for CodeRef attributes
Moose::Meta::Attribute::Native::Trait::Counter(3)
Helper trait for Int attributes which represent counters
Moose::Meta::Attribute::Native::Trait::Hash(3)
Helper trait for HashRef attributes
Moose::Meta::Attribute::Native::Trait::Number(3)
Helper trait for Num attributes
Moose::Meta::Attribute::Native::Trait::String(3)
Helper trait for Str attributes
MooseX::Has::Options::Handler::NativeTypes(3)
Option shortcuts for native types
Mouse::Meta::Attribute::Native(3)
Extend your attribute interfaces
MouseX::NativeTraits(3)
Extend your attribute interfaces for Mouse
MouseX::NativeTraits::ArrayRef(3)
Helper trait for ArrayRef attributes
MouseX::NativeTraits::Bool(3)
Helper trait for Bool attributes
MouseX::NativeTraits::CodeRef(3)
Helper trait for CodeRef attributes
MouseX::NativeTraits::Counter(3)
Helper trait for counter attributes
MouseX::NativeTraits::HashRef(3)
Helper trait for HashRef attributes
MouseX::NativeTraits::MethodProvider(3)
The common base class for method providers
MouseX::NativeTraits::MethodProvider::ArrayRef(3)
Provides methods for ArrayRef
MouseX::NativeTraits::MethodProvider::Bool(3)
Provides methods for Bool
MouseX::NativeTraits::MethodProvider::CodeRef(3)
Provides methods for CodeRef
MouseX::NativeTraits::MethodProvider::Counter(3)
Provides methods for Counter
MouseX::NativeTraits::MethodProvider::HashRef(3)
Provides methods for HashRef
MouseX::NativeTraits::MethodProvider::Num(3)
Provides methods for Num
MouseX::NativeTraits::MethodProvider::Str(3)
Provides methods for Str
MouseX::NativeTraits::Num(3)
Helper trait for Num attributes
MouseX::NativeTraits::Str(3)
Helper trait for Str attributes
Net::ParseWhois(3)
An extendable alternative to Net::Whois for parsing whois information
Net::SMTP::Server(3)
A native Perl SMTP Server implementation for Perl
OpenXPKI::Server::Database::Role::MergeEmulation(3), Header "Name" OpenXPKI::Server::Database::Role::MergeEmulation(3)
Moose role for database drivers to indicate that the DBMS does not provide native support for a MERGE query
OpenXPKI::Server::Database::Role::MergeSupport(3), Header "Name" OpenXPKI::Server::Database::Role::MergeSupport(3)
Moose role for database drivers to indicate native support for MERGE (= REPLACE = INSERT or UPDATE)
Plagger::Plugin::Filter::Thumbnail(3)
use Website thumbnail tool(s) to create alternative image for feeds
Reaction::UI::Widget::Value::Image(3)
An image tag or non-image alternative
SVN::Notify::Alternative(3), Header "Name" SVN::Notify::Alternative(3)
MIME multipart/alternative notification
SpringGraph(3)
Directed Graph alternative to GraphViz
String::Print(3)
printf alternative
String::Urandom(3)
An alternative to using /dev/random
Test2::Formatter::Test2(3)
An alternative to TAP, used by Test2::Harness
Test::use::ok(3)
Alternative to Test::More::use_ok
Text::Match::FastAlternatives(3)
efficient search for many strings
Text::Xslate::Syntax::TTerse(3)
An alternative syntax compatible with Template Toolkit 2
Tk::Dial(3)
An alternative to the Scale widget
Tk::TabFrame(3)
An alternative to the NoteBook widget : a tabbed geometry manager
Type::Tiny::Manual::UsingWithMoo3(3)
alternative use of Type::Tiny with Moo
UI::Dialog::Backend::ASCII(3)
Dialog backend for the native Perl mode of basic text
Xporter(3)
Alternative Exporter with persistant defaults & auto-ISA
autobox(3)
call methods on native types
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
g.dirseps(1), g.dirseps (1)
Internal GRASS utility for converting directory separator characters. Converts any directory separator characters in the input string to or from native host format, and writes the changed path to standard output. Useful in scripts for Windows compatibility
jaotc(1)
The Java static compiler that produces native code for compiled Java methods
mixin(3)
Mix-in inheritance, an alternative to multiple inheritance
native2ascii(1)
Creates localizable applications by converting a file with characters in any supported character encoding to one with ASCII and/or Unicode escapes or vice versa
ok(3)
Alternative to Test::More::use_ok
r.buffer.lowmem(1), r.buffer.lowmem (1)
Creates a raster map showing buffer zones surrounding cells that contain non-NULL category values. This is the low-memory alternative to the classic r.buffer module
r.sun(1), r.sun (1)
Solar irradiance and irradiation model. Computes direct (beam), diffuse and reflected solar irradiation raster maps for given day, latitude, surface and atmospheric conditions. Solar parameters (e.g. sunrise, sunset times, declination, extraterrestrial irradiance, daylight length) are saved in the map history file. Alternatively, a local time can be specified to compute solar incidence angle and/or irradiance raster maps. The shadowing effect of the topography is optionally incorporated
sa-compile(1)
compile SpamAssassin ruleset into native code
tv_grab_es_laguiatv(1)
Alternative TV grabber for Spain
home | help