Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
building modules for bsnmpd(1)
introduction to the Lua modules for flua Lua
openpam_borrow_cred(3), openpam_free_data(3), openpam_free_envlist(3), openpam_get_feature(3), openpam_get_option(3), openpam_log(3), openpam_nullconv(3), openpam_readline(3), openpam_readlinev(3), openpam_readword(3), openpam_restore_cred(3), openpam_set_feature(3), openpam_set_option(3), openpam_straddch(3), openpam_subst(3), openpam_ttyconv(3), pam_error(3), pam_get_authtok(3), pam_info(3), pam_prompt(3), pam_setenv(3), pam_verror(3), pam_vinfo(3), pam_vprompt(3)
Pluggable Authentication Modules Library
pam_acct_mgmt(3), pam_authenticate(3), pam_chauthtok(3), pam_close_session(3), pam_end(3), pam_get_data(3), pam_get_item(3), pam_get_user(3), pam_getenv(3), pam_getenvlist(3), pam_open_session(3), pam_putenv(3), pam_set_data(3), pam_set_item(3), pam_setcred(3), pam_start(3), pam_strerror(3)
Pluggable Authentication Modules Library
show what versions of object modules were used to construct a file
Lists all recent events generated by the ZFS kernel modules
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3)
OpenSSL configuration functions
OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3)
add standard configuration modules
CONF_get1_default_config_file(3ossl), CONF_modules_load_file_ex(3ossl), CONF_modules_load_file(3ossl), CONF_modules_load(3ossl)
OpenSSL configuration functions
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
OpenSSL configuration cleanup functions
CONF_modules_free(3ossl), CONF_modules_finish(3ossl), CONF_modules_unload(3ossl)
OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3)
OpenSSL configuration functions
Run-time support for recursive modules
OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3)
add standard configuration modules
OPENSSL_load_builtin_modules(3ossl), ASN1_add_oid_module(3ossl), ENGINE_add_conf_module(3ossl)
add standard configuration modules
ceylon-copy(1), ceylon copy(1)
Copies modules from one Ceylon module repository to another
ceylon-info(1), ceylon info(1)
Prints information about modules in repositories
ceylon-jigsaw(1), ceylon jigsaw(1)
Tools to interop with Java 9 (Jigsaw) modules
CMake Modules Reference The modules listed here are part of the CMake distribution. Projects may provide further modules; their location(s) can be specified in the CMAKE_MODULE_PATH variable
Unloads all modules
configures DAHDI kernel modules from /usr/local/etc/dahdi/system.conf
encapsulates dynamic loading mechanisms and gives access to functions in foreign dynamic libraries and code modules
Extra CMake Modules
ECM Find Modules Reference
ECM KDE Modules Reference
ECM Modules Reference
GIO module cache creation
Delete submodules
Initialize, update or inspect submodules
Defining submodule properties
Mounting one repository inside another
initialize CAN kernel modules for GPSD
Input method module registration utility
sample on-CPU kernel-level functions and modules
-- IPA modules APIs
iv_tls_user_register(3), iv_tls_user_ptr(3)
thread-local storage handling for ivykis modules
Compile front end for VPI modules
find kernel modules by string
print/modify device/quirk tables in kernel modules
play soundtracker etc. modules on a Unix machine
Compile dynamic-load modules for GNU Octave
handy command interface to the Modules package
command interface to the Modules package
files containing Tcl code for the Modules package rst2man-indent-level 0 1 rstReportMargin \$1
Mono's bundled profiler modules
NCID client output modules overview
OVS startup helper script for loading kernel modules
Oyranos command line option forms dumping tool
Tool for operating on configured PKCS#11 modules
A preloadable wrapper to test PAM applications and PAM Modules
Simple tool to install PKCS#11 modules to known applications
Configuration files for PKCS#11 modules
Test POPular Database Modules (PDMs)
Usage: puppet subcommand [options] action [options] Available subcommands: Common: agent The puppet agent daemon apply Apply Puppet manifests locally config Interact with Puppet's settings. help Display Puppet help. lookup Interactive Hiera lookup module Creates, installs and searches for modules on the Puppet Forge. resource The resource abstraction layer shell Specialized: catalog Compile, save, view, and convert catalogs. describe Display help about resource types device Manage remote network devices doc Generate Puppet references epp Interact directly with the EPP template parser/renderer. facts Retrieve and store facts. filebucket Store and retrieve files in a filebucket generate Generates Puppet code from Ruby definitions. node View and manage node definitions. parser Interact directly with the parser. plugin Interact with the Puppet plugin system. script Run a puppet manifests as a script without compiling a catalog ssl Manage SSL keys and certificates for puppet SSL clients See 'puppet help subcommand action' for help on a specific subcommand action. See 'puppet help subcommand' for help on a specific subcommand. Puppet v7.11.0
Creates, installs and searches for modules on the Puppet Forge
validate and convert YANG modules to various formats
quvi-modules-3rdparty09(7), quvi-modules-3rdparty(7)
Overview of the loadable 3rd party modules
quvi-modules09(7), quvi-modules(7)
Overview of the loadable quvi modules
rancid Perl and Python modules
runawk_modules(3), runawk(3)
wrapper for AWK interpreter
check differences between a pair of SMI or SPPI modules
dump SMI or SPPI modules in various formats
syntax and semantic checks of SMIv1/v2 and SPPI modules
query single information from SMI MIB modules
extract MIB or PIB modules from text files, like RFCs or I-Ds
Loading extension modules into SNOBOL4
system_load(3), system_load (3)
Load and parse additional scripts or modules
Query compatibily of transcode modules chains
Get and Set information in transcode modules
tm.tcl85(n), tm(n)
Facilities for locating and loading of Tcl Modules
tm.tcl86(n), tm(n)
Facilities for locating and loading of Tcl Modules
tm.tcl87(n), tm(n)
Facilities for locating and loading of Tcl Modules
export modules collection
filter modules collection
transcode import modules collection
tool for testing samba VFS modules
compile ZNC modules
zsh loadable modules
Base classes for Alien:: modules
A Module::Build subclass for building Alien:: modules and their libraries
Utility functions for other Alzabo modules
Perl API for creating and working with Apache modules
Reload Perl Modules when Changed on Disk
base class for preprocessor modules
Reload changed modules
extends Module::Build to build/install/configure entire applications (i.e. web applications), not just modules and programs
list changes for CPAN modules
get, unpack, build and install modules from CPAN
App::cpanminus::fatscript(3), cpanm(3)
get, unpack build and install modules from CPAN
Scan prerequisite modules and generate CPANfile
Perl5 module defining platform-specific information and methods for other AppConfig::* modules
A base class for REST query modules
Modules for reading & writing Microsoft WAV files
authentication a subject using login modules
information about Perl modules
factory module for application modules
modules for encoding and decoding data
defines constants for other Badger modules
common functionality for Badger::Filesystem modules
a module for loading modules
Load modules with fallback
base class for Biber output modules
An annotated list of modules in the Bigtop distribution
Table of Contents for Bigtop::Docs::* documentation modules
A helper modules for command line utilities
BioPerl cluster modules
Modules for working with biological coordinates
Base class for modules using indexed sequence files
non-object-oriented utilities used in Bio::Graphics modules "($frame,$offset) = frame_and_offset($pos,$strand,$phase)" 4 Item "($frame,$offset) = frame_and_offset($pos,$strand,$phase)" Calculate the reading frame for a given genomic position, strand and phase. The offset is the offset from $pos to the first nucleotide of the reading frame. In a scalar context, returns the frame only
Base object for Phylip modules
Perl modules for biology
A suitable base class for most BorderStyle::* modules
Install Apache mod_perl2 and related modules
Bundle::Apache::ASP::Extra(3), Bundle::Apache::ASP::Extra(3)
Install modules that provide additional functionality to Apache::ASP
A bundle to install all Apache-Test related modules
A bundle to install all DBD::Pg related modules
A bundle to install DBI and required modules
A bundle of modules for full Object::InsideOut support
A bundle to install Perl6-related modules
A bundle to install PerlPoint related modules
A bundle to install all SNMP::MIB::Compiler related modules
A bundle to install related modules
Allow CGI::Application to use Apache::* modules without interference
query, download and build perl modules from CPAN sites
Versions of particular modules installed on a system
distribution class for MakeMaker related modules
internals for searching for modules
Template class for CSS parser modules
use Cache or Cache::Cache modules for Cache::AgainstFile
alternative warn and die for modules
Report errors from perspective of caller of a "clan" of modules
Dynamically load adaptor modules
a series of charting modules
useful base class for deriving other modules
Load modules and create objects on demand
Survey of Class Builders
A suitable base class for all ColorTheme::* modules
Base class for color theme modules with static list of items (from object's colors key)
Base class for color theme modules with static list of items (from object's items key)
Base class for color theme modules with static list of items (from %THEME)
Core set of DBIx::Class modules
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3)
Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
Garbage collector, used internally by the DNS::LDNS modules
Read config files and make their contents available to other modules
parent module to all other DNSCheck::Test modules
Perl module to aggregate data for use with template modules
Data::Serializer(3), Data::Serializer::(3)
Modules that serialize data structures
how to write Devel::AssertOS::* modules that check what platform they're running on
Code coverage for a collection of modules
Discover the classes of an arbitrary suite of Perl modules
Forces the unavailability of specified Perl modules (for testing)
Devel::MAT::Dumper::Helper(3), "Devel::MAT::Dumper::Helper"(3)
give XS modules extensions for memory dumping
automatic update of required modules documentation
show the modules your program loads, recursively
Modules that calculate message digests
automatically extract prereqs from your modules
install a directory's contents as module-based "ShareDir" content
automatically extract prereqs from your modules
Implements default import method for modules
importing from Exporter::Tiny-based modules
Compile and link C code for Perl modules
generate C code for XS modules' constants
Inventory management of installed modules
File::Spec for Unix, base for other File::Spec modules
shortcut to 'use' all the Font::TTF modules
A collection of n-ary tree related modules
Access to the Serial port for the GPS::* modules
constants used in the many Games::Bingo modules
Base class for all Gantry::Conf::Provider::HTTP modules
Module to tie together multiple Geo::Coder::* modules
Base class for the Geo::Postcodes::* modules
A Tutorial in how to set up an Ajax service for the Geo::Postcodes::* modules
How to use the selection procedure/method of the Geo::Postcodes::* modules
How to use the Geo::Postcodes::* modules
POD generation utilities for Glib-based modules
Process ThereDocs embedded Perl modules
modules for reading and writing directed graphs
Dynamic loading of FormFactory modules
Post-execution HTML dump of loaded modules and environment variables
Display a lot of module information in HTML format
-- article: "User's View of Object-Oriented Modules"
load various IO modules
IO::Capture(3), "IO::Capture"(3)
Abstract Base Class to build modules to capture output
Base Class for IO::Compress modules
Base Class for IO::Uncompress modules
Import a set of modules into the calling module
Alternative but compatible interface to modules that export symbols
Common source code filters for Inline Modules
Inline::Support(3), Inline-Support(3)
Support Information for and related modules
Load all of the important Jifty modules at once
Base class for view modules
LaTeXML::Post::MathML(3), "LaTeXML::Post::MathML"(3)
Post-Processing modules for converting math to MathML
clean imports from package-exporting modules
Baseclass for Lingua::JA::Romanize::* modules
A manager for autoloading Lingua::Stem modules
a distribution of modules to handle locale codes
manage po4a modules
MIME::Tools(3), MIME-tools(3)
modules for parsing (and creating!) MIME entities
unified interface for geoip modules Plugins need to signal SA main package the modules they want loaded package Mail::SpamAssassin::Plugin::MyPlugin; sub new { ... $self->{main}->{geodb_wanted}->{country} = 1; $self->{main}->{geodb_wanted}->{isp} = 1; ) (internal stuff still subject to change)
bundle of ancient email modules
Code shared by the MaxMind DB reader and writer modules
-- Lookup mod_perl modules, objects and methods
Cook mod_perl 2.0 Registry Modules
Build and install Perl modules
Authoring Module::Build modules
Create persistent distribution configuration modules
A Module::Build class for building XS modules
Find modules provided by a dist
Checks which modules are used
Collect sub-modules in directories
what modules shipped with versions of perl
Collection of modules for examining dependencies between parents and children, like Perl files
retrieve dependency information for scripts and modules
Discover the modules a module explicitly uses
Find out what modules are used
Find and use installed modules in a (sub)category
Information about Perl modules
Utility functions for XS modules
runtime require of both modules and files
mark modules as loaded or unloaded
finding and loading modules in a given namespace
Lite installation scripts for third-party modules
Reload perl modules during development
-- store inline templates in modules
Find modules loaded by Perl code without running it
Handle versions of loaded modules with flexible result interface
-- report versions of all modules in memory
Configuration file for the SvxLink server SelCallEnc module
automatically hyperlink CPAN modules when using the syntax {{cpan Some::Module}}
A family of perl modules to streamline writing Naemon, Nagios, Icinga or Shinken (and compatible) plugins
provide API used in translator modules without translating
A role for easy usage of logging in your Moose based modules based on MooseX::Log::Log4perl
Parser for the Nagios::Object set of perl modules
A family of perl modules to streamline writing Nagios plugins
Modules for analysing network traffic
sample modules and test code for Net::Curl
Superclass of all Transport Modules in Net::DRI
Base implementations for modules to negotiate with Google Data APIs
Make common modules IPv6 ready by hotpatching
Modules for parsing Net::LDAP::Shell lines
Perl modules for MQTT Protocol (
base class for all desc modules
base class for all layer modules
base class for all layer 2 modules
base class for all layer 3 modules
base class for all layer 4 modules
add/extend SSL support for common perl modules
Universal interface for FTP-like modules (FTP, SFTP, SCP), in most cases Net::FTP compatible
give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
Ocsinventory::Agent::Modules::Apache::Vhosts::Common(3), Apache::Vhosts::Common(3)
Lib for common operations in vhosts inventory
Ocsinventory::Agent::Modules::Databases::Oracle::Instances(3), Oracle::Instances(3)
Lib for Oracle instances and versions retrieval
OpenXPKI(3), Header "Name" OpenXPKI(3)
base module for all OpenXPKI core modules
Find modules by package name
OpenXPKI::VERSION(3), Header "Name" OpenXPKI::VERSION(3)
version number of OpenXPKI core modules
Simplistic wrapper for the excellent PDF::API2 modules
An overview of the modules in the PDL::IO namespace
A guide to PDL's module reference
Exported Types for use within POEx modules
Collect use pragmata, modules, subroutiones, methods, attributes
Base Class for Pegex Grammar Interface Modules
How to make new Perl::Critic::Policy modules
Policies and modules that were formerly included with Perl::Critic itself, but which have been superseded by others
Base class for all Policy modules
Require that all modules have a "use utf8;" statement
Require that all modules that contain POD have a "=encoding utf8" declaration
Enforce backward compatible code
Export symbols via "@EXPORT_OK" or "%EXPORT_TAGS" instead of "@EXPORT"
Avoid putting conditional logic around compile-time includes
Ban modules that aren't blessed by your shop
Minimize complexity in code that is outside of subroutines
don't put a #! line at the start of a module file
Put packages (especially subclasses) in separate files
don't import the whole of POSIX into a module
avoid quoted version number string in a "use" statement
Write "require Module" instead of "require"
End each module with an explicitly "1;" instead of some funky expression
Always make the "package" explicit
Package declaration must match filename
"use English" must be passed a "-no_match_vars" argument
Require a "use 5.006;" or similar
Give every module a "$VERSION" number
Don't use strings like "v1.4" or "1.4.5" when including other modules
Descriptions of the Policy modules included with Perl::Critic itself
scan for Moose sugar indicators of required modules
scan for core Perl 5 language indicators of required modules
scan for modules loaded with
Perl modules for molecular chemistry
Github v3 base class for all Pithub modules
Debug panel to inspect versions of loaded modules
Refresh all modules in %INC
Generates pod documentation by analysing perl modules
An object oriented Perl modules for handling tasks related to RDF
Regexp patterns related to Perl modules
Load/Unload Kernel Modules
SNMP Interface to Firewall Services Modules for features not covered elsewhere
Snmp modules to perform snmp set,get,walk,next,walk_hash etc
exists purely as a superclass for client classes declared by the various SOAP::Lite transport modules
an abstract class extended by more specialized transport modules
Base class for importing symbols for svn modules
An interface for Serializer modules
A Serializer role for JSON modules
A manager for autoloading Search::InvertedIndex modules
A Class for making an optimized order list for calling MTA modules in Sisimai::Lhost::*
A collection of very basic statistics modules
Base class that provides common functionality to all "TAP::*" modules
import core Tangram modules
Factory module for instantiating other TT2 modules
Template Toolkit Modules
Base class for modules that control child processes
Constants shared between multiple runner modules
Testing tools for Alien modules
Base class for test modules
write your unit tests in other modules than *.t
Test external commands (nearly) as easily as loaded modules
Utility functions for Test::Database modules
Test all modules which depend on your module
List modules and versions loaded if tests fail
perform tests on all modules of a distribution
Create a Fake ShareDir for your modules for testing
Object Oriented ShareDir creation for modules
Check Perl modules have version numbers
do use_ok for modules in search path
Skip tests when modules not available
LWP-backed test scaffold for the Nginx C modules
Socket-backed test scaffold for the Nginx C modules and Nginx/OpenResty-based libraries and applications
Subclass of Test::Nginx::Socket::Lua to test NGINX udp stream modules
Subclass of Test::Nginx::Socket::Lua to test NGINX stream modules
Ease testing test modules built with Test::Builder
Help testing test modules built with Test::Builder
Help testing test modules built with Test::Builder
do use_ok() for all the MANIFESTed modules
Check to see that version's in modules are sane
Test fallback behaviour in absence of modules
provides base classes for user structure modules
factory for component used by Text::Diff3 modules
A Brief Survey of Templating Modules
Perl modules for computing association scores of Ngrams. This module provides the basic framework for these measures
Load your commonly-used modules in a single import
require() modules from a variable
utilities used within VCP's modules
Modules for EC2 EBS volumes
Split Verilog modules into separate files
Base class for WWW::Myspace modules
LWP::UserAgent subclass for WWW::Shorten modules
Methods shared across all WWW::Shorten modules
Perl modules for computing measures of semantic relatedness
Frequently asked questions about the modules
Testcontainer for XML::Reader. Refactor/move the tests from XML::Reader out into this module XML::Reader::Testcases. The tests will later be called by the new modules XML::Reader::RS and by XML::Reader::PP
Abstract base class to be used by XML::Validate modules
Error formatting class for YAML modules
Container module for common ZoneMinder modules
a perl script using the Autodia modules to create UML Class Diagrams or documents. from code or other data sources
a perl script using the Autodia modules to create UML Class Diagrams or documents. from code or other data sources
postpone load of modules until a function is used
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.17.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex:, (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d -d -w /var/www/thing -d -d (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{",":"/www/eg1/", "":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"":"/var/www"}. (default: {}) P
Compile Perl 6 Grammars to Perl 5 Modules
List changes for CPAN modules
detect outdated CPAN modules in your environment
report coverage statistics on CPAN modules
get, unpack build and install modules from CPAN
g.gui.rlisetup(1), g.gui.rlisetup (1)
Configuration tool for modules
g.manual(1), g.manual (1)
Displays the manual pages of GRASS modules, (1)
Search in GRASS modules using keywords
Miscellaneous utility functions to be used when implementing Erlang web server API modules
A shell to examine installed modules
assemble and optimize a set of modules and their dependencies into a custom runtime image
JMX access tools and modules
create and use a local lib/ for perl modules with PERL5LIB
LXQt Settings Center for all related modules and applications
creates language modules for Lingua::Identify
mem(3), •ḟmem(3)
use modules in "mem"ory (already declared in same file)
find information about modules
List modules used by a set of Perl source files without running them
ompi_crcp(7), OMPI_CRCP(7)
Open MPI MCA Checkpoint/Restart Coordination Protocol (CRCP) Framework: Overview of Open MPI's CRCP framework, and selected modules. Open MPI 4.1.1
opal_crs(7), OPAL_CRS(7)
Open PAL MCA Checkpoint/Restart Service (CRS): Overview of Open PAL's CRS framework, and selected modules. Open MPI 4.1.1
orte_filem(7), ORTE_FILEM(7)
Open RTE MCA File Management (FileM) Framework: Overview of Open RTE's FileM framework, and selected modules. Open MPI 4.1.1
orte_snapc(7), ORTE_SNAPC(7)
Open RTE MCA Snapshot Coordination (SnapC) Framework: Overview of Open RTE's SnapC framework, and selected modules. Open MPI 4.1.1
orte_sstore(7), Open RTE MCA File Management (SStore) Framework(7)
Overview of Open RTE's SStore framework, and selected modules. Open MPI 4.1.1
Oyranos command line option forms dumping tool
Perl modules (packages and symbol tables)
Installing CPAN Modules
constructing new Perl modules and finding existing ones
Rough tool to translate Perl4 .pl files to Perl5 .pm modules
find installed modules
pod::prima-gencls(3), gencls(3)
class interface compiler for Prima core modules
generate standard POE tests for third-party modules
Load modules with relative names, sbase(1)
Create class which will provide access to HTML files as modules
Scan prerequisite modules and generate CPANfile
script wrapper for the Data::Stag modules
shim to allow modules to depend on
a script to package Devel::AssertOS modules with your code
A Cross Reference Tool for analyzing dependencies between functions, modules, applications and releases
home | help