Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
BUS_CONFIG_INTR(9)
configure interrupt polarity and trigger mode
VGLBitmapAllocateBits(3), VGLBitmapCopy(3), VGLBitmapCreate(3), VGLBitmapDestroy(3), VGLBitmapPutChar(3), VGLBitmapString(3), VGLBlankDisplay(3), VGLBox(3), VGLCheckSwitch(3), VGLClear(3), VGLEllipse(3), VGLEnd(3), VGLFilledBox(3), VGLFilledEllipse(3), VGLGetXY(3), VGLInit(3), VGLLine(3), VGLKeyboardInit(3), VGLKeyboardEnd(3), VGLKeyboardGetCh(3), VGLMouseInit(3), VGLMouseMode(3), VGLMouseSetImage(3), VGLMouseSetStdImage(3), VGLMouseStatus(3), VGLPanScreen(3), VGLSetBorder(3), VGLSetPalette(3), VGLSetPaletteIndex(3), VGLSetVScreenSize(3), VGLSetXY(3), VGLTextSetFontFile(3)
Video Graphics Library functions
archive_entry_gid(3), archive_entry_set_gid(3), archive_entry_uid(3), archive_entry_set_uid(3), archive_entry_perm(3), archive_entry_set_perm(3), archive_entry_strmode(3), archive_entry_uname(3), archive_entry_uname_w(3), archive_entry_set_uname(3), archive_entry_copy_uname(3), archive_entry_copy_uname_w(3), archive_entry_update_uname_utf8(3), archive_entry_gname(3), archive_entry_gname_w(3), archive_entry_set_gname(3), archive_entry_copy_gname(3), archive_entry_copy_gname_w(3), archive_entry_update_gname_utf8(3), archive_entry_fflags(3), archive_entry_fflags_text(3), archive_entry_set_fflags(3), archive_entry_copy_fflags_text(3), archive_entry_copy_fflags_text_w(3)
functions for manipulating ownership and permissions in archive entry descriptions
archive_entry_stat(3), archive_entry_copy_stat(3), archive_entry_filetype(3), archive_entry_set_filetype(3), archive_entry_mode(3), archive_entry_set_mode(3), archive_entry_size(3), archive_entry_size_is_set(3), archive_entry_set_size(3), archive_entry_unset_size(3), archive_entry_dev(3), archive_entry_set_dev(3), archive_entry_dev_is_set(3), archive_entry_devmajor(3), archive_entry_set_devmajor(3), archive_entry_devminor(3), archive_entry_set_devminor(3), archive_entry_ino(3), archive_entry_set_ino(3), archive_entry_ino_is_set(3), archive_entry_ino64(3), archive_entry_set_ino64(3), archive_entry_nlink(3), archive_entry_rdev(3), archive_entry_set_rdev(3), archive_entry_rdevmajor(3), archive_entry_set_rdevmajor(3), archive_entry_rdevminor(3), archive_entry_set_rdevminor(3)
accessor functions for manipulating archive entry descriptions
cap_bind(3), cap_connect(3), cap_getaddrinfo(3), cap_gethostbyaddr(3), cap_gethostbyname(3), cap_gethostbyname2(3), cap_getnameinfo(3), cap_net_free(3), cap_net_limit(3), cap_net_limit_addr2name(3), cap_net_limit_addr2name_family(3), cap_net_limit_bind(3), cap_net_limit_connect(3), cap_net_limit_init(3), cap_net_limit_name2addr(3), cap_net_limit_name2addr_family(3)
library for networking in capability mode
cap_closelog(3), cap_syslog cap_vsyslog cap_openlog cap_closelog cap_setlogmask(3)
library for syslog in capability mode
cap_enter(2), cap_getmode(2)
Capability mode system calls
cap_getaddrinfo(3), cap_getnameinfo(3), cap_gethostbyname(3), cap_gethostbyname2(3), cap_gethostbyaddr(3), cap_dns_type_limit(3), cap_dns_family_limit(3)
library for getting network host entry in capability mode
cap_getgrent(3), cap_getgrnam(3), cap_getgrgid(3), cap_getgrent_r(3), cap_getgrnam_r(3), cap_getgrgid_r(3), cap_setgroupent(3), cap_setgrent(3), cap_endgrent(3), cap_grp_limit_cmds(3), cap_grp_limit_fields(3), cap_grp_limit_groups(3)
library for group database operations in capability mode
cap_getpwent(3), cap_getpwnam(3), cap_getpwuid(3), cap_getpwent_r(3), cap_getpwnam_r(3), cap_getpwuid_r(3), cap_setpassent(3), cap_setpwent(3), cap_endpwent(3), cap_pwd_limit_cmds(3), cap_pwd_limit_fields(3), cap_pwd_limit_users(3)
library for password database operations in capability mode
cap_sandboxed(3)
Check if in a capability mode sandbox
cap_sysctl(3)
library for getting or setting system information in capability mode
cdceem(4)
USB Communication Device Class Ethernet Emulation Model (CDC EEM) driver
chat(8)
Automated conversational script with a modem
chmod(1)
change file modes
chmod(2), fchmod(2), lchmod(2), fchmodat(2)
change mode of file
chromebook_platform(4)
support driver for hardware on various Chromebook models
crypto(4), cryptodev(4)
user-mode access to hardware-accelerated cryptography
def_prog_mode(3), def_shell_mode(3), reset_prog_mode(3), reset_shell_mode(3), resetty(3), savetty(3), getsyx(3), setsyx(3), ripoffline(3), curs_set(3), napms(3)
low-level curses routines
efidev(4), efirtc(4)
user-mode access to UEFI runtime services
fileargs_cinit(3), fileargs_cinitnv(3), fileargs_init(3), fileargs_initnv(3), fileargs_free(3), fileargs_lstat(3), fileargs_open(3), fileargs_fopen(3)
library for handling files in capability mode
getmode(3), setmode(3)
modify mode bits
getty(8)
set terminal mode
nmdm(4)
nullmodem terminal driver
pcap_can_set_rfmon(3)
check whether monitor mode can be set for a not-yet-activated capture handle
pcap_set_promisc(3)
set promiscuous mode for a not-yet-activated capture handle
pcap_set_rfmon(3)
set monitor mode for a not-yet-activated capture handle
pcap_setnonblock(3), pcap_getnonblock(3)
set or get the state of non-blocking mode on a capture device
pmc_name_of_capability(3), pmc_name_of_class(3), pmc_name_of_cputype(3), pmc_name_of_disposition(3), pmc_name_of_event(3), pmc_name_of_mode(3), pmc_name_of_state(3)
human readable names for numeric constants used by pmc(3) and hwpmc(4)
pthread_multi_np(3), pthread_single_np(3)
switch between multi- and single-threaded scheduling modes
sbp_targ(4)
Serial Bus Protocol 2 (SBP-2) Target Mode devices driver
snmp_value_free(3), snmp_value_parse(3), snmp_value_copy(3), snmp_pdu_free(3), snmp_pdu_decode(3), snmp_pdu_encode(3), snmp_pdu_decode_header(3), snmp_pdu_decode_scoped(3), snmp_pdu_decode_secmode(3), snmp_pdu_init_secparams(3), snmp_pdu_dump(3), snmp_passwd_to_keys(3), snmp_get_local_keys(3), snmp_calc_keychange(3), TRUTH_MK(3), TRUTH_GET(3), TRUTH_OK(3)
SNMP decoding and encoding library
strmode(3)
convert inode status information into a symbolic string
sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3)
lookup name of various enumerated values
sysdecode_mask(3), sysdecode_accessmode(3), sysdecode_atflags(3), sysdecode_capfcntlrights(3), sysdecode_fcntl_fileflags(3), sysdecode_fileflags(3), sysdecode_filemode(3), sysdecode_flock_operation(3), sysdecode_mlockall_flags(3), sysdecode_mmap_flags(3), sysdecode_mmap_prot(3), sysdecode_mount_flags(3), sysdecode_msg_flags(3), sysdecode_msync_flags(3), sysdecode_open_flags(3), sysdecode_pipe2_flags(3), sysdecode_reboot_howto(3), sysdecode_rfork_flags(3), sysdecode_semget_flags(3), sysdecode_sendfile_flags(3), sysdecode_shmat_flags(3), sysdecode_sctp_nxt_flags(3), sysdecode_sctp_rcv_flags(3), sysdecode_sctp_snd_flags(3), sysdecode_socket_type(3), sysdecode_thr_create_flags(3), sysdecode_umtx_cvwait_flags(3), sysdecode_umtx_rwlock_flags(3), sysdecode_vmprot(3), sysdecode_wait4_options(3), sysdecode_wait6_options(3)
print name of various bitmask values
umask(2)
set file creation mode mask
umodem(4)
USB Communication Device Class serial (CDC ACM) driver
BIO_do_handshake(3), BIO_f_ssl(3), BIO_set_ssl(3), BIO_get_ssl(3), BIO_set_ssl_mode(3), BIO_set_ssl_renegotiate_bytes(3), BIO_get_num_renegotiates(3), BIO_set_ssl_renegotiate_timeout(3), BIO_new_ssl(3), BIO_new_ssl_connect(3), BIO_new_buffer_ssl_connect(3), BIO_ssl_copy_session_id(3), BIO_ssl_shutdown(3)
SSL BIO
BIO_s_accept(3), BIO_set_accept_name(3), BIO_set_accept_port(3), BIO_get_accept_name(3), BIO_get_accept_port(3), BIO_new_accept(3), BIO_set_nbio_accept(3), BIO_set_accept_bios(3), BIO_get_peer_name(3), BIO_get_peer_port(3), BIO_get_accept_ip_family(3), BIO_set_accept_ip_family(3), BIO_set_bind_mode(3), BIO_get_bind_mode(3), BIO_do_accept(3)
accept BIO
EVP_CIPHER_CTX_init(3), EVP_EncryptInit_ex(3), EVP_EncryptUpdate(3), EVP_EncryptFinal_ex(3), EVP_DecryptInit_ex(3), EVP_DecryptUpdate(3), EVP_DecryptFinal_ex(3), EVP_CipherInit_ex(3), EVP_CipherUpdate(3), EVP_CipherFinal_ex(3), EVP_CIPHER_CTX_set_key_length(3), EVP_CIPHER_CTX_ctrl(3), EVP_CIPHER_CTX_cleanup(3), EVP_EncryptInit(3), EVP_EncryptFinal(3), EVP_DecryptInit(3), EVP_DecryptFinal(3), EVP_CipherInit(3), EVP_CipherFinal(3), EVP_get_cipherbyname(3), EVP_get_cipherbynid(3), EVP_get_cipherbyobj(3), EVP_CIPHER_nid(3), EVP_CIPHER_block_size(3), EVP_CIPHER_key_length(3), EVP_CIPHER_iv_length(3), EVP_CIPHER_flags(3), EVP_CIPHER_mode(3), EVP_CIPHER_type(3), EVP_CIPHER_CTX_cipher(3), EVP_CIPHER_CTX_nid(3), EVP_CIPHER_CTX_block_size(3), EVP_CIPHER_CTX_key_length(3), EVP_CIPHER_CTX_iv_length(3), EVP_CIPHER_CTX_get_app_data(3), EVP_CIPHER_CTX_set_app_data(3), EVP_CIPHER_CTX_type(3), EVP_CIPHER_CTX_flags(3), EVP_CIPHER_CTX_mode(3), EVP_CIPHER_param_to_asn1(3), EVP_CIPHER_asn1_to_param(3), EVP_CIPHER_CTX_set_padding(3), EVP_enc_null(3), EVP_des_cbc(3), EVP_des_ecb(3), EVP_des_cfb(3), EVP_des_ofb(3), EVP_des_ede_cbc(3), EVP_des_ede(3), EVP_des_ede_ofb(3), EVP_des_ede_cfb(3), EVP_des_ede3_cbc(3), EVP_des_ede3(3), EVP_des_ede3_ofb(3), EVP_des_ede3_cfb(3), EVP_desx_cbc(3), EVP_rc4(3), EVP_rc4_40(3), EVP_rc4_hmac_md5(3), EVP_idea_cbc(3), EVP_idea_ecb(3), EVP_idea_cfb(3), EVP_idea_ofb(3), EVP_rc2_cbc(3), EVP_rc2_ecb(3), EVP_rc2_cfb(3), EVP_rc2_ofb(3), EVP_rc2_40_cbc(3), EVP_rc2_64_cbc(3), EVP_bf_cbc(3), EVP_bf_ecb(3), EVP_bf_cfb(3), EVP_bf_ofb(3), EVP_cast5_cbc(3), EVP_cast5_ecb(3), EVP_cast5_cfb(3), EVP_cast5_ofb(3), EVP_rc5_32_12_16_cbc(3), EVP_rc5_32_12_16_ecb(3), EVP_rc5_32_12_16_cfb(3), EVP_rc5_32_12_16_ofb(3), EVP_aes_128_gcm(3), EVP_aes_192_gcm(3), EVP_aes_256_gcm(3), EVP_aes_128_ccm(3), EVP_aes_192_ccm(3), EVP_aes_256_ccm(3), EVP_aes_128_cbc_hmac_sha1(3), EVP_aes_256_cbc_hmac_sha1(3), EVP_aes_128_cbc_hmac_sha256(3), EVP_aes_256_cbc_hmac_sha256(3)
EVP cipher routines
EVP_CIPHER_CTX_new(3), EVP_CIPHER_CTX_reset(3), EVP_CIPHER_CTX_free(3), EVP_EncryptInit_ex(3), EVP_EncryptUpdate(3), EVP_EncryptFinal_ex(3), EVP_DecryptInit_ex(3), EVP_DecryptUpdate(3), EVP_DecryptFinal_ex(3), EVP_CipherInit_ex(3), EVP_CipherUpdate(3), EVP_CipherFinal_ex(3), EVP_CIPHER_CTX_set_key_length(3), EVP_CIPHER_CTX_ctrl(3), EVP_EncryptInit(3), EVP_EncryptFinal(3), EVP_DecryptInit(3), EVP_DecryptFinal(3), EVP_CipherInit(3), EVP_CipherFinal(3), EVP_get_cipherbyname(3), EVP_get_cipherbynid(3), EVP_get_cipherbyobj(3), EVP_CIPHER_nid(3), EVP_CIPHER_block_size(3), EVP_CIPHER_key_length(3), EVP_CIPHER_iv_length(3), EVP_CIPHER_flags(3), EVP_CIPHER_mode(3), EVP_CIPHER_type(3), EVP_CIPHER_CTX_cipher(3), EVP_CIPHER_CTX_nid(3), EVP_CIPHER_CTX_block_size(3), EVP_CIPHER_CTX_key_length(3), EVP_CIPHER_CTX_iv_length(3), EVP_CIPHER_CTX_get_app_data(3), EVP_CIPHER_CTX_set_app_data(3), EVP_CIPHER_CTX_type(3), EVP_CIPHER_CTX_flags(3), EVP_CIPHER_CTX_mode(3), EVP_CIPHER_param_to_asn1(3), EVP_CIPHER_asn1_to_param(3), EVP_CIPHER_CTX_set_padding(3), EVP_enc_null(3)
EVP cipher routines
EVP_PKEY_CTX_ctrl(3), EVP_PKEY_CTX_ctrl_str(3), EVP_PKEY_CTX_ctrl_uint64(3), EVP_PKEY_CTX_md(3), EVP_PKEY_CTX_set_signature_md(3), EVP_PKEY_CTX_get_signature_md(3), EVP_PKEY_CTX_set_mac_key(3), EVP_PKEY_CTX_set_rsa_padding(3), EVP_PKEY_CTX_get_rsa_padding(3), EVP_PKEY_CTX_set_rsa_pss_saltlen(3), EVP_PKEY_CTX_get_rsa_pss_saltlen(3), EVP_PKEY_CTX_set_rsa_keygen_bits(3), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3), EVP_PKEY_CTX_set_rsa_keygen_primes(3), EVP_PKEY_CTX_set_rsa_mgf1_md(3), EVP_PKEY_CTX_get_rsa_mgf1_md(3), EVP_PKEY_CTX_set_rsa_oaep_md(3), EVP_PKEY_CTX_get_rsa_oaep_md(3), EVP_PKEY_CTX_set0_rsa_oaep_label(3), EVP_PKEY_CTX_get0_rsa_oaep_label(3), EVP_PKEY_CTX_set_dsa_paramgen_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_q_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_md(3), EVP_PKEY_CTX_set_dh_paramgen_prime_len(3), EVP_PKEY_CTX_set_dh_paramgen_subprime_len(3), EVP_PKEY_CTX_set_dh_paramgen_generator(3), EVP_PKEY_CTX_set_dh_paramgen_type(3), EVP_PKEY_CTX_set_dh_rfc5114(3), EVP_PKEY_CTX_set_dhx_rfc5114(3), EVP_PKEY_CTX_set_dh_pad(3), EVP_PKEY_CTX_set_dh_nid(3), EVP_PKEY_CTX_set_dh_kdf_type(3), EVP_PKEY_CTX_get_dh_kdf_type(3), EVP_PKEY_CTX_set0_dh_kdf_oid(3), EVP_PKEY_CTX_get0_dh_kdf_oid(3), EVP_PKEY_CTX_set_dh_kdf_md(3), EVP_PKEY_CTX_get_dh_kdf_md(3), EVP_PKEY_CTX_set_dh_kdf_outlen(3), EVP_PKEY_CTX_get_dh_kdf_outlen(3), EVP_PKEY_CTX_set0_dh_kdf_ukm(3), EVP_PKEY_CTX_get0_dh_kdf_ukm(3), EVP_PKEY_CTX_set_ec_paramgen_curve_nid(3), EVP_PKEY_CTX_set_ec_param_enc(3), EVP_PKEY_CTX_set_ecdh_cofactor_mode(3), EVP_PKEY_CTX_get_ecdh_cofactor_mode(3), EVP_PKEY_CTX_set_ecdh_kdf_type(3), EVP_PKEY_CTX_get_ecdh_kdf_type(3), EVP_PKEY_CTX_set_ecdh_kdf_md(3), EVP_PKEY_CTX_get_ecdh_kdf_md(3), EVP_PKEY_CTX_set_ecdh_kdf_outlen(3), EVP_PKEY_CTX_get_ecdh_kdf_outlen(3), EVP_PKEY_CTX_set0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_get0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_set1_id(3), EVP_PKEY_CTX_get1_id(3), EVP_PKEY_CTX_get1_id_len(3)
algorithm specific control operations
EVP_PKEY_CTX_set_hkdf_md(3), EVP_PKEY_CTX_set1_hkdf_salt(3), EVP_PKEY_CTX_set1_hkdf_key(3), EVP_PKEY_CTX_add1_hkdf_info(3), EVP_PKEY_CTX_hkdf_mode(3)
HMAC-based Extract-and-Expand key derivation algorithm
SSL_CTX_get_verify_mode(3), SSL_get_verify_mode(3), SSL_CTX_get_verify_depth(3), SSL_get_verify_depth(3), SSL_get_verify_callback(3), SSL_CTX_get_verify_callback(3)
get currently set verification parameters
SSL_CTX_set_mode(3), SSL_CTX_clear_mode(3), SSL_set_mode(3), SSL_clear_mode(3), SSL_CTX_get_mode(3), SSL_get_mode(3)
manipulate SSL engine mode
SSL_CTX_set_session_cache_mode(3), SSL_CTX_get_session_cache_mode(3)
enable/disable session caching
SSL_set_connect_state(3), SSL_get_accept_state(3)
prepare SSL object to work in client or server mode
SSL_set_connect_state(3), SSL_set_accept_state(3), SSL_is_server(3)
functions for manipulating and examining the client or server mode of an SSL object
des_modes(7)
the variants of DES and other crypto algorithms of OpenSSL
"glLightModelf(3), glLightModeli(3), glLightModelfv(3), glLightModeliv(3)
set the lighting model parameters
"glMaterialf(3), glMateriali(3), glMaterialfv(3), glMaterialiv(3)
specify material parameters for the lighting model
"glPixelStoref(3), glPixelStorei(3)
set pixel storage modes
"glPixelTransferf(3), glPixelTransferi(3)
set pixel transfer modes
ALLEGRO_DISPLAY_MODE(3)
Allegro 5 API
ALLEGRO_FILE_MODE(3)
Allegro 5 API
ALLEGRO_MOUSE_EMULATION_MODE(3)
Allegro 5 API
ALLEGRO_PLAYMODE(3)
Allegro 5 API
AnimateTypes(1x)
animation modes used in the Animate module's config
BIO_do_handshake(3), BIO_f_ssl(3), BIO_set_ssl(3), BIO_get_ssl(3), BIO_set_ssl_mode(3), BIO_set_ssl_renegotiate_bytes(3), BIO_get_num_renegotiates(3), BIO_set_ssl_renegotiate_timeout(3), BIO_new_ssl(3), BIO_new_ssl_connect(3), BIO_new_buffer_ssl_connect(3), BIO_ssl_copy_session_id(3), BIO_ssl_shutdown(3)
SSL BIO
BIO_do_handshake(3ossl), BIO_f_ssl(3ossl), BIO_set_ssl(3ossl), BIO_get_ssl(3ossl), BIO_set_ssl_mode(3ossl), BIO_set_ssl_renegotiate_bytes(3ossl), BIO_get_num_renegotiates(3ossl), BIO_set_ssl_renegotiate_timeout(3ossl), BIO_new_ssl(3ossl), BIO_new_ssl_connect(3ossl), BIO_new_buffer_ssl_connect(3ossl), BIO_ssl_copy_session_id(3ossl), BIO_ssl_shutdown(3ossl)
SSL BIO
BIO_s_accept(3), BIO_set_accept_name(3), BIO_set_accept_port(3), BIO_get_accept_name(3), BIO_get_accept_port(3), BIO_new_accept(3), BIO_set_nbio_accept(3), BIO_set_accept_bios(3), BIO_get_peer_name(3), BIO_get_peer_port(3), BIO_get_accept_ip_family(3), BIO_set_accept_ip_family(3), BIO_set_bind_mode(3), BIO_get_bind_mode(3), BIO_do_accept(3)
accept BIO
BIO_s_accept(3ossl), BIO_set_accept_name(3ossl), BIO_set_accept_port(3ossl), BIO_get_accept_name(3ossl), BIO_get_accept_port(3ossl), BIO_new_accept(3ossl), BIO_set_nbio_accept(3ossl), BIO_set_accept_bios(3ossl), BIO_get_peer_name(3ossl), BIO_get_peer_port(3ossl), BIO_get_accept_ip_family(3ossl), BIO_set_accept_ip_family(3ossl), BIO_set_bind_mode(3ossl), BIO_get_bind_mode(3ossl), BIO_do_accept(3ossl)
accept BIO
BasketLosses(1)
Example of Modeling Losses Across Correlated Assets
Beep(3), Beep CDKallocStrings CDKcountStrings CDKfreeChtypes CDKfreeStrings CDKsplitString baseName ceilCDK chlen chstrncpy chtype2Char cleanChar cleanChtype cmpStrChstr copyChar copyCharList copyChtype copyChtypeList dirName floorCDK freeChar freeCharList freeChtype freeChtypeList intlen lenCharList lenChtypeList mode2Char searchList sortList cdk_misc(3)
Curses Development Kit Miscellaneous Routines
CDKgetDirectoryContents(3), CDKgetDirectoryContents CDKreadFile alignxy char2Chtype char2DisplayType checkForLink chtype2String deleteCursesWindow eraseCursesWindow getListIndex getString justifyString mode2Filetype moveCursesWindow popupDialog popupLabel popupLabelAttrib selectFile setWidgetDimension stripWhiteSpace viewFile viewInfo cdk_util(3)
Cdk utility functions
CURLOPT_PROXY_TRANSFER_MODE(3)
append FTP transfer mode to URL for proxy
CURLOPT_VERBOSE(3)
set verbose mode on/off
DOM_CharacterData(3m)
the Document Object Model (DOM) DOM_CharacterData interface
DOM_Document(3m)
the Document Object Model (DOM) DOM_Document interface
DOM_Element(3m)
the Document Object Model (DOM) DOM_Element interface
DOM_Implementation(3m)
the Document Object Model (DOM) DOM_Implementation interface
DOM_NamedNodeMap(3m)
the Document Object Model (DOM) DOM_NamedNodeMap interface
DOM_Node(3m)
the Document Object Model (DOM) DOM_Node interface
DOM_NodeList(3m)
the Document Object Model (DOM) DOM_NodeList interface
DOM_Text(3m)
the Document Object Model (DOM) DOM_Text interface
EVP_CIPHER_CTX_new(3), EVP_CIPHER_CTX_reset(3), EVP_CIPHER_CTX_free(3), EVP_EncryptInit_ex(3), EVP_EncryptUpdate(3), EVP_EncryptFinal_ex(3), EVP_DecryptInit_ex(3), EVP_DecryptUpdate(3), EVP_DecryptFinal_ex(3), EVP_CipherInit_ex(3), EVP_CipherUpdate(3), EVP_CipherFinal_ex(3), EVP_CIPHER_CTX_set_key_length(3), EVP_CIPHER_CTX_ctrl(3), EVP_EncryptInit(3), EVP_EncryptFinal(3), EVP_DecryptInit(3), EVP_DecryptFinal(3), EVP_CipherInit(3), EVP_CipherFinal(3), EVP_get_cipherbyname(3), EVP_get_cipherbynid(3), EVP_get_cipherbyobj(3), EVP_CIPHER_nid(3), EVP_CIPHER_block_size(3), EVP_CIPHER_key_length(3), EVP_CIPHER_iv_length(3), EVP_CIPHER_flags(3), EVP_CIPHER_mode(3), EVP_CIPHER_type(3), EVP_CIPHER_CTX_cipher(3), EVP_CIPHER_CTX_nid(3), EVP_CIPHER_CTX_block_size(3), EVP_CIPHER_CTX_key_length(3), EVP_CIPHER_CTX_iv_length(3), EVP_CIPHER_CTX_get_app_data(3), EVP_CIPHER_CTX_set_app_data(3), EVP_CIPHER_CTX_type(3), EVP_CIPHER_CTX_flags(3), EVP_CIPHER_CTX_mode(3), EVP_CIPHER_param_to_asn1(3), EVP_CIPHER_asn1_to_param(3), EVP_CIPHER_CTX_set_padding(3), EVP_enc_null(3)
EVP cipher routines
EVP_CIPHER_fetch(3ossl), EVP_CIPHER_up_ref(3ossl), EVP_CIPHER_free(3ossl), EVP_CIPHER_CTX_new(3ossl), EVP_CIPHER_CTX_reset(3ossl), EVP_CIPHER_CTX_free(3ossl), EVP_EncryptInit_ex(3ossl), EVP_EncryptInit_ex2(3ossl), EVP_EncryptUpdate(3ossl), EVP_EncryptFinal_ex(3ossl), EVP_DecryptInit_ex(3ossl), EVP_DecryptInit_ex2(3ossl), EVP_DecryptUpdate(3ossl), EVP_DecryptFinal_ex(3ossl), EVP_CipherInit_ex(3ossl), EVP_CipherInit_ex2(3ossl), EVP_CipherUpdate(3ossl), EVP_CipherFinal_ex(3ossl), EVP_CIPHER_CTX_set_key_length(3ossl), EVP_CIPHER_CTX_ctrl(3ossl), EVP_EncryptInit(3ossl), EVP_EncryptFinal(3ossl), EVP_DecryptInit(3ossl), EVP_DecryptFinal(3ossl), EVP_CipherInit(3ossl), EVP_CipherFinal(3ossl), EVP_Cipher(3ossl), EVP_get_cipherbyname(3ossl), EVP_get_cipherbynid(3ossl), EVP_get_cipherbyobj(3ossl), EVP_CIPHER_is_a(3ossl), EVP_CIPHER_get0_name(3ossl), EVP_CIPHER_get0_description(3ossl), EVP_CIPHER_names_do_all(3ossl), EVP_CIPHER_get0_provider(3ossl), EVP_CIPHER_get_nid(3ossl), EVP_CIPHER_get_params(3ossl), EVP_CIPHER_gettable_params(3ossl), EVP_CIPHER_get_block_size(3ossl), EVP_CIPHER_get_key_length(3ossl), EVP_CIPHER_get_iv_length(3ossl), EVP_CIPHER_get_flags(3ossl), EVP_CIPHER_get_mode(3ossl), EVP_CIPHER_get_type(3ossl), EVP_CIPHER_CTX_cipher(3ossl), EVP_CIPHER_CTX_get0_cipher(3ossl), EVP_CIPHER_CTX_get1_cipher(3ossl), EVP_CIPHER_CTX_get0_name(3ossl), EVP_CIPHER_CTX_get_nid(3ossl), EVP_CIPHER_CTX_get_params(3ossl), EVP_CIPHER_gettable_ctx_params(3ossl), EVP_CIPHER_CTX_gettable_params(3ossl), EVP_CIPHER_CTX_set_params(3ossl), EVP_CIPHER_settable_ctx_params(3ossl), EVP_CIPHER_CTX_settable_params(3ossl), EVP_CIPHER_CTX_get_block_size(3ossl), EVP_CIPHER_CTX_get_key_length(3ossl), EVP_CIPHER_CTX_get_iv_length(3ossl), EVP_CIPHER_CTX_get_tag_length(3ossl), EVP_CIPHER_CTX_get_app_data(3ossl), EVP_CIPHER_CTX_set_app_data(3ossl), EVP_CIPHER_CTX_flags(3ossl), EVP_CIPHER_CTX_set_flags(3ossl), EVP_CIPHER_CTX_clear_flags(3ossl), EVP_CIPHER_CTX_test_flags(3ossl), EVP_CIPHER_CTX_get_type(3ossl), EVP_CIPHER_CTX_get_mode(3ossl), EVP_CIPHER_CTX_get_num(3ossl), EVP_CIPHER_CTX_set_num(3ossl), EVP_CIPHER_CTX_is_encrypting(3ossl), EVP_CIPHER_param_to_asn1(3ossl), EVP_CIPHER_asn1_to_param(3ossl), EVP_CIPHER_CTX_set_padding(3ossl), EVP_enc_null(3ossl), EVP_CIPHER_do_all_provided(3ossl), EVP_CIPHER_nid(3ossl), EVP_CIPHER_name(3ossl), EVP_CIPHER_block_size(3ossl), EVP_CIPHER_key_length(3ossl), EVP_CIPHER_iv_length(3ossl), EVP_CIPHER_flags(3ossl), EVP_CIPHER_mode(3ossl), EVP_CIPHER_type(3ossl), EVP_CIPHER_CTX_encrypting(3ossl), EVP_CIPHER_CTX_nid(3ossl), EVP_CIPHER_CTX_block_size(3ossl), EVP_CIPHER_CTX_key_length(3ossl), EVP_CIPHER_CTX_iv_length(3ossl), EVP_CIPHER_CTX_tag_length(3ossl), EVP_CIPHER_CTX_num(3ossl), EVP_CIPHER_CTX_type(3ossl), EVP_CIPHER_CTX_mode(3ossl)
EVP cipher routines
EVP_PKEY_CTX_ctrl(3), EVP_PKEY_CTX_ctrl_str(3), EVP_PKEY_CTX_ctrl_uint64(3), EVP_PKEY_CTX_md(3), EVP_PKEY_CTX_set_signature_md(3), EVP_PKEY_CTX_get_signature_md(3), EVP_PKEY_CTX_set_mac_key(3), EVP_PKEY_CTX_set_rsa_padding(3), EVP_PKEY_CTX_get_rsa_padding(3), EVP_PKEY_CTX_set_rsa_pss_saltlen(3), EVP_PKEY_CTX_get_rsa_pss_saltlen(3), EVP_PKEY_CTX_set_rsa_keygen_bits(3), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3), EVP_PKEY_CTX_set_rsa_keygen_primes(3), EVP_PKEY_CTX_set_rsa_mgf1_md(3), EVP_PKEY_CTX_get_rsa_mgf1_md(3), EVP_PKEY_CTX_set_rsa_oaep_md(3), EVP_PKEY_CTX_get_rsa_oaep_md(3), EVP_PKEY_CTX_set0_rsa_oaep_label(3), EVP_PKEY_CTX_get0_rsa_oaep_label(3), EVP_PKEY_CTX_set_dsa_paramgen_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_q_bits(3), EVP_PKEY_CTX_set_dsa_paramgen_md(3), EVP_PKEY_CTX_set_dh_paramgen_prime_len(3), EVP_PKEY_CTX_set_dh_paramgen_subprime_len(3), EVP_PKEY_CTX_set_dh_paramgen_generator(3), EVP_PKEY_CTX_set_dh_paramgen_type(3), EVP_PKEY_CTX_set_dh_rfc5114(3), EVP_PKEY_CTX_set_dhx_rfc5114(3), EVP_PKEY_CTX_set_dh_pad(3), EVP_PKEY_CTX_set_dh_nid(3), EVP_PKEY_CTX_set_dh_kdf_type(3), EVP_PKEY_CTX_get_dh_kdf_type(3), EVP_PKEY_CTX_set0_dh_kdf_oid(3), EVP_PKEY_CTX_get0_dh_kdf_oid(3), EVP_PKEY_CTX_set_dh_kdf_md(3), EVP_PKEY_CTX_get_dh_kdf_md(3), EVP_PKEY_CTX_set_dh_kdf_outlen(3), EVP_PKEY_CTX_get_dh_kdf_outlen(3), EVP_PKEY_CTX_set0_dh_kdf_ukm(3), EVP_PKEY_CTX_get0_dh_kdf_ukm(3), EVP_PKEY_CTX_set_ec_paramgen_curve_nid(3), EVP_PKEY_CTX_set_ec_param_enc(3), EVP_PKEY_CTX_set_ecdh_cofactor_mode(3), EVP_PKEY_CTX_get_ecdh_cofactor_mode(3), EVP_PKEY_CTX_set_ecdh_kdf_type(3), EVP_PKEY_CTX_get_ecdh_kdf_type(3), EVP_PKEY_CTX_set_ecdh_kdf_md(3), EVP_PKEY_CTX_get_ecdh_kdf_md(3), EVP_PKEY_CTX_set_ecdh_kdf_outlen(3), EVP_PKEY_CTX_get_ecdh_kdf_outlen(3), EVP_PKEY_CTX_set0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_get0_ecdh_kdf_ukm(3), EVP_PKEY_CTX_set1_id(3), EVP_PKEY_CTX_get1_id(3), EVP_PKEY_CTX_get1_id_len(3)
algorithm specific control operations
EVP_PKEY_CTX_ctrl(3ossl), EVP_PKEY_CTX_ctrl_str(3ossl), EVP_PKEY_CTX_ctrl_uint64(3ossl), EVP_PKEY_CTX_md(3ossl), EVP_PKEY_CTX_set_signature_md(3ossl), EVP_PKEY_CTX_get_signature_md(3ossl), EVP_PKEY_CTX_set_mac_key(3ossl), EVP_PKEY_CTX_set_group_name(3ossl), EVP_PKEY_CTX_get_group_name(3ossl), EVP_PKEY_CTX_set_rsa_padding(3ossl), EVP_PKEY_CTX_get_rsa_padding(3ossl), EVP_PKEY_CTX_set_rsa_pss_saltlen(3ossl), EVP_PKEY_CTX_get_rsa_pss_saltlen(3ossl), EVP_PKEY_CTX_set_rsa_keygen_bits(3ossl), EVP_PKEY_CTX_set_rsa_keygen_pubexp(3ossl), EVP_PKEY_CTX_set1_rsa_keygen_pubexp(3ossl), EVP_PKEY_CTX_set_rsa_keygen_primes(3ossl), EVP_PKEY_CTX_set_rsa_mgf1_md_name(3ossl), EVP_PKEY_CTX_set_rsa_mgf1_md(3ossl), EVP_PKEY_CTX_get_rsa_mgf1_md(3ossl), EVP_PKEY_CTX_get_rsa_mgf1_md_name(3ossl), EVP_PKEY_CTX_set_rsa_oaep_md_name(3ossl), EVP_PKEY_CTX_set_rsa_oaep_md(3ossl), EVP_PKEY_CTX_get_rsa_oaep_md(3ossl), EVP_PKEY_CTX_get_rsa_oaep_md_name(3ossl), EVP_PKEY_CTX_set0_rsa_oaep_label(3ossl), EVP_PKEY_CTX_get0_rsa_oaep_label(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_bits(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_q_bits(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_md(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_md_props(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_gindex(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_type(3ossl), EVP_PKEY_CTX_set_dsa_paramgen_seed(3ossl), EVP_PKEY_CTX_set_dh_paramgen_prime_len(3ossl), EVP_PKEY_CTX_set_dh_paramgen_subprime_len(3ossl), EVP_PKEY_CTX_set_dh_paramgen_generator(3ossl), EVP_PKEY_CTX_set_dh_paramgen_type(3ossl), EVP_PKEY_CTX_set_dh_paramgen_gindex(3ossl), EVP_PKEY_CTX_set_dh_paramgen_seed(3ossl), EVP_PKEY_CTX_set_dh_rfc5114(3ossl), EVP_PKEY_CTX_set_dhx_rfc5114(3ossl), EVP_PKEY_CTX_set_dh_pad(3ossl), EVP_PKEY_CTX_set_dh_nid(3ossl), EVP_PKEY_CTX_set_dh_kdf_type(3ossl), EVP_PKEY_CTX_get_dh_kdf_type(3ossl), EVP_PKEY_CTX_set0_dh_kdf_oid(3ossl), EVP_PKEY_CTX_get0_dh_kdf_oid(3ossl), EVP_PKEY_CTX_set_dh_kdf_md(3ossl), EVP_PKEY_CTX_get_dh_kdf_md(3ossl), EVP_PKEY_CTX_set_dh_kdf_outlen(3ossl), EVP_PKEY_CTX_get_dh_kdf_outlen(3ossl), EVP_PKEY_CTX_set0_dh_kdf_ukm(3ossl), EVP_PKEY_CTX_get0_dh_kdf_ukm(3ossl), EVP_PKEY_CTX_set_ec_paramgen_curve_nid(3ossl), EVP_PKEY_CTX_set_ec_param_enc(3ossl), EVP_PKEY_CTX_set_ecdh_cofactor_mode(3ossl), EVP_PKEY_CTX_get_ecdh_cofactor_mode(3ossl), EVP_PKEY_CTX_set_ecdh_kdf_type(3ossl), EVP_PKEY_CTX_get_ecdh_kdf_type(3ossl), EVP_PKEY_CTX_set_ecdh_kdf_md(3ossl), EVP_PKEY_CTX_get_ecdh_kdf_md(3ossl), EVP_PKEY_CTX_set_ecdh_kdf_outlen(3ossl), EVP_PKEY_CTX_get_ecdh_kdf_outlen(3ossl), EVP_PKEY_CTX_set0_ecdh_kdf_ukm(3ossl), EVP_PKEY_CTX_get0_ecdh_kdf_ukm(3ossl), EVP_PKEY_CTX_set1_id(3ossl), EVP_PKEY_CTX_get1_id(3ossl), EVP_PKEY_CTX_get1_id_len(3ossl), EVP_PKEY_CTX_set_kem_op(3ossl)
algorithm specific control operations
EVP_PKEY_CTX_set_hkdf_md(3), EVP_PKEY_CTX_set1_hkdf_salt(3), EVP_PKEY_CTX_set1_hkdf_key(3), EVP_PKEY_CTX_add1_hkdf_info(3), EVP_PKEY_CTX_hkdf_mode(3)
HMAC-based Extract-and-Expand key derivation algorithm
EVP_PKEY_CTX_set_hkdf_md(3ossl), EVP_PKEY_CTX_set1_hkdf_salt(3ossl), EVP_PKEY_CTX_set1_hkdf_key(3ossl), EVP_PKEY_CTX_add1_hkdf_info(3ossl), EVP_PKEY_CTX_set_hkdf_mode(3ossl)
HMAC-based Extract-and-Expand key derivation algorithm
GENLIB_DEF_LOFIG(3)
open a netlist model as current figure
GENLIB_DEF_PHFIG(3)
open a layout model as current figure
GENLIB_DEF_PHSC(3)
load a netlist and open a layout model as current figure
GENLIB_HEIGHT(3)
compute the height of a model
GFX_MODE(3)
Stores video mode information. Allegro game programming library
GFX_MODE_LIST(3)
Stores an array of GFX_MODE structures. Allegro game programming library
Gaussian1dModels(1)
Example of Gaussian Short Rate Model for Interest Rate Derivatives
JSBSim(1)
standalone version of the JSBSim open source flight dynamics model
LDView(1)
3D viewer for LDraw models
LatentModel(1)
Example of Modeling Correlated Defaults
MPI_File_get_amode(3)
Returns the file access mode
MPI_File_get_atomicity(3)
Returns the atomicity mode
MPI_File_set_atomicity(3)
Sets the atomicity mode
MarketModels(1), MarketModel(1)
Example of Interst Rate Derivative Pricing
Notifier.tcl86(3), Tcl_CreateEventSource(3), Tcl_DeleteEventSource(3), Tcl_SetMaxBlockTime(3), Tcl_QueueEvent(3), Tcl_ThreadQueueEvent(3), Tcl_ThreadAlert(3), Tcl_GetCurrentThread(3), Tcl_DeleteEvents(3), Tcl_InitNotifier(3), Tcl_FinalizeNotifier(3), Tcl_WaitForEvent(3), Tcl_AlertNotifier(3), Tcl_SetTimer(3), Tcl_ServiceAll(3), Tcl_ServiceEvent(3), Tcl_GetServiceMode(3), Tcl_SetServiceMode(3), Tcl_ServiceModeHook(3), Tcl_SetNotifier(3)
the event queue and notifier interfaces
Notifier.tcl87(3), Tcl_CreateEventSource(3), Tcl_DeleteEventSource(3), Tcl_SetMaxBlockTime(3), Tcl_QueueEvent(3), Tcl_ThreadQueueEvent(3), Tcl_ThreadAlert(3), Tcl_GetCurrentThread(3), Tcl_DeleteEvents(3), Tcl_InitNotifier(3), Tcl_FinalizeNotifier(3), Tcl_WaitForEvent(3), Tcl_AlertNotifier(3), Tcl_SetTimer(3), Tcl_ServiceAll(3), Tcl_ServiceEvent(3), Tcl_GetServiceMode(3), Tcl_SetServiceMode(3), Tcl_ServiceModeHook(3), Tcl_SetNotifier(3)
the event queue and notifier interfaces
POLYTYPE_ATEX(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_ATEX_LIT(3), POLYTYPE_PTEX_LIT(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_ATEX_MASK(3), POLYTYPE_PTEX_MASK(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_ATEX_MASK_LIT(3), POLYTYPE_PTEX_MASK_LIT(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_ATEX_MASK_TRANS(3), POLYTYPE_PTEX_MASK_TRANS(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_ATEX_TRANS(3), POLYTYPE_PTEX_TRANS(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_FLAT(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_GCOL(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_GRGB(3)
Polygon rendering mode type Allegro game programming library
POLYTYPE_PTEX(3)
Polygon rendering mode type Allegro game programming library
SDL_ListModes(3)
Returns a pointer to an array of available screen dimensions for the given format and video flags
SDL_SetVideoMode(3)
Set up a video mode with the specified width, height and bits-per-pixel
SDL_VideoModeOK(3)
Check to see if a particular video mode is supported
SDL_WM_ToggleFullScreen(3)
Toggles fullscreen mode
SPI_execp(3)
execute a statement in read/write mode
SSL_CTX_get_verify_mode(3), SSL_get_verify_mode(3), SSL_CTX_get_verify_depth(3), SSL_get_verify_depth(3), SSL_get_verify_callback(3), SSL_CTX_get_verify_callback(3)
get currently set verification parameters
SSL_CTX_get_verify_mode(3ossl), SSL_get_verify_mode(3ossl), SSL_CTX_get_verify_depth(3ossl), SSL_get_verify_depth(3ossl), SSL_get_verify_callback(3ossl), SSL_CTX_get_verify_callback(3ossl)
get currently set verification parameters
SSL_CTX_set_mode(3), SSL_CTX_clear_mode(3), SSL_set_mode(3), SSL_clear_mode(3), SSL_CTX_get_mode(3), SSL_get_mode(3)
manipulate SSL engine mode
SSL_CTX_set_mode(3ossl), SSL_CTX_clear_mode(3ossl), SSL_set_mode(3ossl), SSL_clear_mode(3ossl), SSL_CTX_get_mode(3ossl), SSL_get_mode(3ossl)
manipulate SSL engine mode
SSL_CTX_set_session_cache_mode(3), SSL_CTX_get_session_cache_mode(3)
enable/disable session caching
SSL_CTX_set_session_cache_mode(3ossl), SSL_CTX_get_session_cache_mode(3ossl)
enable/disable session caching
SSL_set_connect_state(3), SSL_set_accept_state(3), SSL_is_server(3)
functions for manipulating and examining the client or server mode of an SSL object
SSL_set_connect_state(3ossl), SSL_set_accept_state(3ossl), SSL_is_server(3ossl)
functions for manipulating and examining the client or server mode of an SSL object
Sympa::Spindle::ProcessModeration(3Sympa)
Workflow of message moderation
Sympa::Spindle::ToAuth(3Sympa)
Process to store requests into request spool to wait for moderation
Sympa::Spindle::ToAuthOwner(3Sympa)
Process to store requests into request spool to wait for moderation
Sympa::Spindle::ToModeration(3Sympa)
Process to store messages into held spool to wait for moderation
Sympa::Spool::Auth(3Sympa)
Spool for held requests waiting for moderation
Sympa::Spool::Moderation(3Sympa)
Spool for held messages waiting for moderation
TIFFCurrentRow(3tiff), TIFFCurrentStrip(3tiff), TIFFCurrentTile(3tiff), TIFFCurrentDirectory(3tiff), TIFFLastDirectory(3tiff), TIFFFileno(3tiff), TIFFFileName(3tiff), TIFFGetMode(3tiff), TIFFIsTiled(3tiff), TIFFIsByteSwapped(3tiff), TIFFIsUpSampled(3tiff), TIFFIsMSB2LSB(3tiff), TIFFGetVersion(3tiff)
query routines
Tcl_AlertNotifier.tcl85(3), Tcl_CreateEventSource(3), Tcl_DeleteEventSource(3), Tcl_SetMaxBlockTime(3), Tcl_QueueEvent(3), Tcl_ThreadQueueEvent(3), Tcl_ThreadAlert(3), Tcl_GetCurrentThread(3), Tcl_DeleteEvents(3), Tcl_InitNotifier(3), Tcl_FinalizeNotifier(3), Tcl_WaitForEvent(3), Tcl_AlertNotifier(3), Tcl_SetTimer(3), Tcl_ServiceAll(3), Tcl_ServiceEvent(3), Tcl_GetServiceMode(3), Tcl_SetServiceMode(3)
the event queue and notifier interfaces
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_BadChannelOption.tcl85(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl86(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl87(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tk_CreateImageType.tk86(3), Tk_CreateImageType(3), Tk_GetImageMasterData(3), Tk_GetImageModelData(3), Tk_InitImageArgs(3)
define new kind of image
XF86VidModeQueryExtension(3), XF86VidModeQueryVersion(3), XF86VidModeSetClientVersion(3), XF86VidModeGetModeLine(3), XF86VidModeGetAllModeLines(3), XF86VidModeAddModeLine(3), XF86VidModeDeleteModeLine(3), XF86VidModeModModeLine(3), XF86VidModeValidateModeLine(3), XF86VidModeSwitchMode(3), XF86VidModeSwitchToMode(3), XF86VidModeLockModeSwitch(3), XF86VidModeGetMonitor(3), XF86VidModeGetViewPort(3), XF86VidModeSetViewPort(3), XF86VidModeGetDotClocks(3), XF86VidModeGetGamma(3), XF86VidModeSetGamma(3), XF86VidModeGetGammaRamp(3), XF86VidModeSetGammaRamp(3), XF86VidModeGetGammaRampSize(3), XF86VidModeGetPermissions(3)
Extension library for the XFree86-VidMode X extension
XSetArcMode(3), XSetSubwindowMode(3), XSetGraphicsExposure(3)
GC convenience routines
XSetCloseDownMode(3), XKillClient(3)
control clients
XSetDeviceMode(3)
change the mode of a device
XmDataFieldSetAddMode(3)
A DataField function that sets the state of Add mode "XmDataFieldSetAddMode" "DataField functions" "XmDataFieldSetAddMode"
XmListSetAddMode(3)
A List function that sets add mode in the list "XmListSetAddMode" "List functions" "XmListSetAddMode"
XmRepTypeInstallTearOffModelConverter(3)
A representation type manager function that installs the resource converter for XmNtearOffModel. "XmRepTypeInstallTearOff\%ModelConverter" "representation type manager functions" "XmRepTypeInstallTearOff\%ModelConverter"
XmTextFieldSetAddMode(3)
A TextField function that sets the state of Add mode "XmTextFieldSetAddMode" "TextField functions" "XmTextFieldSetAddMode"
XmTextSetAddMode(3)
A Text function that sets the state of Add mode "XmTextSetAddMode" "Text functions" "XmTextSetAddMode"
activateCDKSelection(3), activateCDKSelection destroyCDKSelection drawCDKSelection eraseCDKSelection getCDKSelectionBox getCDKSelectionChoice getCDKSelectionChoices getCDKSelectionCurrent getCDKSelectionHighlight getCDKSelectionItems getCDKSelectionMode getCDKSelectionModes getCDKSelectionTitle injectCDKSelection moveCDKSelection newCDKSelection positionCDKSelection setCDKSelection setCDKSelectionBackgroundAttrib setCDKSelectionBackgroundColor setCDKSelectionBox setCDKSelectionBoxAttribute setCDKSelectionChoice setCDKSelectionChoices setCDKSelectionCurrent setCDKSelectionHighlight setCDKSelectionHorizontalChar setCDKSelectionItems setCDKSelectionLLChar setCDKSelectionLRChar setCDKSelectionMode setCDKSelectionModes setCDKSelectionPostProcess setCDKSelectionPreProcess setCDKSelectionTitle setCDKSelectionULChar setCDKSelectionURChar setCDKSelectionVerticalChar cdk_selection(3)
curses selection list widget
add_3dmesh(3), add_3dmesh (3)
Load/build a mesh and attach to a model
addlofig(3)
create a new structural cell model man1/alc_origin.1
addlomodel(3)
create a tempotary logical model and add it to a list man1/alc_origin.1
addphfig(3)
create a new physical cell model man1/alc_origin.1
airmon-ng(8)
POSIX sh script designed to turn wireless cards into monitor mode
al175(8)
Driver for Eltek UPS models with AL175 alarm module
al_get_audio_stream_playmode(3)
Allegro 5 API
al_get_display_mode(3)
Allegro 5 API
al_get_fs_entry_mode(3)
Allegro 5 API
al_get_mouse_emulation_mode(3)
Allegro 5 API
al_get_num_display_modes(3)
Allegro 5 API
al_get_sample_instance_playmode(3)
Allegro 5 API
al_set_audio_stream_playmode(3)
Allegro 5 API
al_set_mouse_emulation_mode(3)
Allegro 5 API
al_set_sample_instance_playmode(3)
Allegro 5 API
allcm(1)
force the most important Computer-Modern-fonts to be calculated
antinspect(6)
ant model inspection screenhack
apertium-gen-modes(1)
intermediate mode file generator for Apertium
apertium-validate-modes(1)
intermediate modes XML validator for Apertium
archive_entry_perms(3), archive_entry_gid(3), archive_entry_set_gid(3), archive_entry_uid(3), archive_entry_set_uid(3), archive_entry_perm(3), archive_entry_set_perm(3), archive_entry_strmode(3), archive_entry_uname(3), archive_entry_uname_w(3), archive_entry_set_uname(3), archive_entry_copy_uname(3), archive_entry_copy_uname_w(3), archive_entry_update_uname_utf8(3), archive_entry_gname(3), archive_entry_gname_w(3), archive_entry_set_gname(3), archive_entry_copy_gname(3), archive_entry_copy_gname_w(3), archive_entry_update_gname_utf8(3), archive_entry_fflags(3), archive_entry_fflags_text(3), archive_entry_set_fflags(3), archive_entry_copy_fflags_text(3), archive_entry_copy_fflags_text_w(3)
functions for manipulating ownership and permissions in archive entry descriptions
archive_entry_stat(3), archive_entry_copy_stat(3), archive_entry_filetype(3), archive_entry_set_filetype(3), archive_entry_mode(3), archive_entry_set_mode(3), archive_entry_size(3), archive_entry_size_is_set(3), archive_entry_set_size(3), archive_entry_unset_size(3), archive_entry_dev(3), archive_entry_set_dev(3), archive_entry_dev_is_set(3), archive_entry_devmajor(3), archive_entry_set_devmajor(3), archive_entry_devminor(3), archive_entry_set_devminor(3), archive_entry_ino(3), archive_entry_set_ino(3), archive_entry_ino_is_set(3), archive_entry_ino64(3), archive_entry_set_ino64(3), archive_entry_nlink(3), archive_entry_rdev(3), archive_entry_set_rdev(3), archive_entry_rdevmajor(3), archive_entry_set_rdevmajor(3), archive_entry_rdevminor(3), archive_entry_set_rdevminor(3)
accessor functions for manipulating archive entry descriptions
atslogd(8)
ATSlog gives the convenient interface for viewing and analysing calls of various models PBX
atslogmaster(8)
ATSlog gives the convenient interface for viewing and analysing bells of various models PBX
attrtag_model(3), attrtag_model (3)
Set 3d model rendering-specific flags
balls(l)
preprocessor for space-filling models in Raster3D molecular graphics package
bg_test(6)
test the background mode of svgalib
boxes(1)
text mode box and comment drawing filter
build_3dbox(3), build_3dbox (3)
Generate a 3D cube model
build_3dplane(3), build_3dplane (3)
Build a model comprised of a tesselated plane
build_cylinder(3), build_cylinder (3)
Generate a full or half cylinder model
build_sphere(3), build_sphere (3)
Generate a 3D sphere or hemisphere model
camtag_model(3), camtag_model (3)
Define a camera for the 3D processing of a rendertarget
cdrdao(1)
reads and writes CDs in disc-at-once mode
centerim(1)
a text mode based IM client for Linux, *BSD, Sun Solaris, MacOS X and possibly, other Unices. ICQ2000, Yahoo!, AIM TOC, IRC, MSN, Gadu-Gadu and Jabber protocols are now supported. Internal LiveJournal client and RSS reader are also provided
climm(1)
a small, text mode ICQ client
cmake-server(7)
CMake Server The cmake(1) server mode has been removed since CMake 3.20. Clients should use the cmake-file-api(7) instead
cmalign(1)
align sequences to a covariance model
cmbuild(1)
construct covariance model(s) from structurally annotated RNA multiple sequence alignment(s)
cmcalibrate(1)
fit exponential tails for covariance model E-value determination
cmconvert(1)
convert Infernal covariance model files
cmemit(1)
sample sequences from a covariance model
cmfetch(1)
retrieve covariance model(s) from a file
cmpp(1)
Code Model PreProcessor
cmpress(1)
prepare a covariance model database for cmscan
cmscan(1)
search sequence(s) against a covariance model database
cmsearch(1)
search covariance model(s) against a sequence database
cmstat(1)
summary statistics for a covariance model file
coap_block(3), coap_context_set_block_mode(3), coap_add_data_large_request(3), coap_add_data_large_response(3), coap_get_data_large(3), coap_block_build_body(3)
Work with CoAP Blocks
coap_resource(3), coap_resource_init(3), coap_resource_unknown_init(3), coap_resource_proxy_uri_init(3), coap_add_resource(3), coap_delete_resource(3), coap_resource_set_mode(3), coap_resource_set_userdata(3), coap_resource_get_userdata(3)
Work with CoAP resources
combine_lang_model(1)
generate starter traineddata
cpg_model_initialize(3)
Create a new connection to the CPG service
cpu_model(3)
Contains the Intel CPU submodel. Allegro game programming library
create_blender_table(3)
Emulates truecolor blender effects in paletted modes. Allegro game programming library
crrcsim(1)
a model-airplane flight simulation program
ctmconv(1)
file format converter for 3D models
ctmviewer(1)
3D viewer for models of various file formats
cvt(1)
calculate VESA CVT mode lines
cxGetArchiveAccessMode(3)
Returns the archive's file access mode
cxGetDirMode(3)
Return the mode of the specified directory
cxGetFileMode(3)
Returns the mode of the specified file
cxGetFpAccessMode(3)
Returns the access mode of the specified file pointer
cxGetFsNodeMode(3)
Returns the mode of the specified node
cxSetArchiveAccessMode(3)
Sets the archive's file access mode
cxSetDirMode(3)
Sets the mode of the specified directory
cxSetFileMode(3)
Sets the mode of the specified file
cxSetFpAccessMode(3)
Sets the access mode of the specified file pointer
cxSetFsNodeMode(3)
Sets the mode of the specified node
def_prog_mode(3x), def_shell_mode(3x), reset_prog_mode(3x), reset_shell_mode(3x), resetty(3x), savetty(3x), getsyx(3x), setsyx(3x), ripoffline(3x), curs_set(3x), napms(3x)
low-level curses routines
des_modes(7)
the variants of DES and other crypto algorithms of OpenSSL
des_modes(7ossl)
the variants of DES and other crypto algorithms of OpenSSL
destroy_gfx_mode_list(3)
Frees the list created by get_gfx_mode_list(). Allegro game programming library
dhex(1)
hex editor with a diff mode
dpkg-statoverride(1)
override ownership and mode of files
drawing_mode(3)
Sets the graphics drawing mode. Allegro game programming library
drm-kms(7)
Kernel Mode-Setting
drmModeGetResources(3)
retrieve current display configuration information
ecasound-iam(1)
ecasound interactive mode
elinks(1)
lynx-like alternative character mode WWW browser
everups(8)
Driver for Ever UPS models
evim(1)
easy Vim, edit a file with Vim and setup for modeless editing
ex12bit(3)
How to fake a 12-bit truecolor mode on an 8-bit card. Allegro game programming library
ex3buf(3)
Mode-X triple buffering and retrace interrupt simulation. Allegro game programming library
exblend(3)
Using translucency in truecolor modes. Allegro game programming library
exlights(3)
One way to do colored lighting effects in a hicolor video mode. Allegro game programming library
expat(3)
Using patterned drawing modes and sub-bitmaps. Allegro game programming library
exscroll(3)
Mode-X hardware scrolling and split screens. Allegro game programming library
exswitch(3)
Controlling the console switch mode for background running. Allegro game programming library
ezmlm-accept(1)
accept messages in moderation queue
ezmlm-clean(1)
clean moderation directory
ezmlm-moderate(1)
process moderator actions for message acceptance and rejection
ezmlm-store(1)
store messages posted to a moderated lists and send moderation requests to the moderator(s)
faxaddmodem(8c)
configure a modem for use with
faxmodem(8c)
dynamically add a modem to a server system
faxstate(8c)
control ``modem state'' of a device used by
fdupes-help(7)
fdupes interactive mode reference
festival_client(1)
client access to festiva; text-to-speech server mode
finalize_3dmodel(3), finalize_3dmodel (3)
Mark a 3D model as finalized
fix132x43(1)
fix problems with certain (132 column) graphics modes dump the state of the card as the svgalib chipset driver sees it
fldigi(1)
digital modem program for hamradio operators
forward3d_model(3), forward3d_model (3)
Push the model along its view vector
freelomodel(3)
free a lofig_list for temporary models man1/alc_origin.1
ftp-cp(1)
copy files from from one place to another using passive mode ftp
ftp-get(1)
copy files from local host to remote using passive mode ftp
ftp-put(1)
copy files from local host to remote using passive mode ftp
gammu(1)
Does some neat things with your cellular phone or modem. rst2man-indent-level 0 1 rstReportMargin \$1
gchmod(1), chmod(1)
change file mode bits
gcrystal(1)
light model visualizer for crystal structures
get_color_conversion(3)
Returns the current color conversion mode. Allegro game programming library
get_display_switch_mode(3)
Returns the current display switching mode. Allegro game programming library
get_gfx_mode(3)
Returns the id of the current graphics driver. Allegro game programming library
get_gfx_mode_list(3)
Obtains a list of available video modes. Allegro game programming library
get_gfx_mode_type(3)
Retrieves type information for a specific graphics card. Allegro game programming library
getlomodel(3)
retrieve a model from a lofig_list man1/alc_origin.1
getrdsmodellist(3)
gets model list of the instances of a figure man1/alc_origin.1
gfx_mode_select(3)
Displays the Allegro graphics mode selection dialog
gfx_mode_select_ex(3)
Extended version of the graphics mode selection dialog. Allegro game programming library
gfx_mode_select_filter(3)
Even more extended version of the graphics mode selection dialog. Allegro game programming library
git-annex-direct(1)
switch repository to direct mode (deprecated)
git-annex-indirect(1)
switch repository to indirect mode (deprecated)
git-annex-proxy(1)
safely bypass direct mode guard (deprecated)
git-diff-tree(1)
Compares the content and mode of blobs found via two tree objects
glFeedbackBuffer(3), "glFeedbackBuffer(3)
controls feedback mode
glMatrixMode(3), "glMatrixMode(3)
specify which matrix is the current matrix
glPolygonMode(3), "glPolygonMode(3)
select a polygon rasterization mode
glRenderMode(3), "glRenderMode(3)
set rasterization mode
glSelectBuffer(3), "glSelectBuffer(3)
establish a buffer for selection mode values
glShadeModel(3), "glShadeModel(3)
select flat or smooth shading
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
allow the user to compose an input line
gl_io_mode(3), gl_raw_io(3), gl_normal_io(3), gl_tty_signals(3), gl_abandon_line(3), gl_handle_signal(3), gl_pending_io(3)
How to use gl_get_line() from an external event loop
gl_printf(3)
write formatted output in graphic mode
gl_setcontextvgavirtual(3)
set the context to a virtual mode
gl_setwritemode(3)
set the font writemode flags
gleTextureMode(3)
set the type of GLE automatic texture coordinate generation
gleTextureMode(3gle)
set the type of GLE automatic texture coordinate generation
glutEnterGameMode(3), glutLeaveGameMode(3)
enters and leaves GLUT's game mode
glutGameModeGet(3)
retrieves GLUT device information represented by integers
glutGameModeString(3)
sets the game mode configuration via a string
glutInitDisplayMode(3)
sets the initial display mode
glutInitDisplayString(3)
sets the initial display mode via a string
gmx-anaeig(1)
Analyze eigenvectors/normal modes rst2man-indent-level 0 1 rstReportMargin \$1
gmx-mdrun(1)
Perform a simulation, do a normal mode analysis or an energy minimization rst2man-indent-level 0 1 rstReportMargin \$1
gmx-nmeig(1)
Diagonalize the Hessian for normal mode analysis rst2man-indent-level 0 1 rstReportMargin \$1
gmx-nmens(1)
Generate an ensemble of structures from the normal modes rst2man-indent-level 0 1 rstReportMargin \$1
gnokiid(8)
create a virtual modem for old Nokia mobile phones
gnutls_fips140_mode_enabled(3)
API function
gnutls_fips140_set_mode(3)
API function
gnutls_session_enable_compatibility_mode(3)
API function
gpo(1)
Text mode interface of gPodder
gpsctl(1)
control the modes of a GPS
grace(1)
command line interface xmgrace - full-featured GUI mode gracebat - batch mode - print and exit
gtf(1)
calculate VESA GTF mode lines
harminv(1)
extract mode frequencies from time-series data
hypervisor_mode(7)
allows you to run simultaneously many virtual router instances, and to simulate ATM, Ethernet or Frame(hyRelay networks
iaxmodem(1)
software modem with IAX2 connectivity
icewm-focus_mode(5), icewm-focus_mode(5)
icewm focus mode configuration file
ideviceenterrecovery(1)
Make a device enter recovery mode
image_framecyclemode(3), image_framecyclemode (3)
Enable/Disable time-triggered active frameset frame cycling
image_texfilter(3), image_texfilter (3)
Switch object video filtering mode
intel_backlight(1)
control backlight on various modern Intel GPUs
is_windowed_mode(3)
Tells if you are running in windowed mode. Allegro game programming library
jack_freewheel(1)
JACK toolkit client to control freewheeling mode
jclient.pl(1)
sample client for module mode (perl version)
joytest(6)
test the svgalib joystick package in text mode
json2xml(1)
translates JSON documents conforming to a YANG data model into XML
keepassxc(1)
a modern open-source password manager
kermit(1)
C(hyKermit 9.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic (if not advanced) use of C(hyKermit 9.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 9.0 from earlier releases. This document is also available as a Web page at: http://www.columbia.edu/kermit/ckututor.html
keyboard_clearstate(3)
reset the state of all keys when in raw keyboard mode
keyboard_close(3)
return the keyboard to normal operation from raw mode
keyboard_getstate(3)
get a pointer to a buffer holding the state of all keys in raw keyboard mode
keyboard_init(3), keyboard_init_return_fd(3)
initialize the keyboard to raw mode
keyboard_keypressed(3)
check if a key is pressed when in raw keyboard mode
keyboard_seteventhandler(3), keyboard_setdefaulteventhandler(3)
define an event handler for keyboard events in raw mode
keyboard_translatekeys(3)
modify scancode mappings in raw keyboard mode
kpsestat(1)
compute octal mode from mode of existing file
ksql_alloc_child(3)
allocate a ksql database handle in split-process mode
leocad(1), LeoCAD(1)
CAD program for LEGO models
libgetdns(3)
-- an implementation of a modern asynchronous DNS API by and for application developers
libowfat_ndelay_off(3), ndelay_off(3)
put file descriptor in non-blocking mode
libowfat_ndelay_on(3), ndelay_on(3)
put file descriptor in non-blocking mode
libowfat_socket_broadcast(3), socket_broadcast(3)
set UDP socket to broadcast mode
libssh2_channel_handle_extended_data(3)
set extended data handling mode
libssh2_channel_handle_extended_data2(3)
set extended data handling mode
libssh2_channel_set_blocking(3)
set or clear blocking mode on channel
libssh2_session_set_blocking(3)
set or clear blocking mode on session
links(1)
lynx-like alternative character mode WWW browser
loadlofig(3)
load a new logical cell model from disk man1/alc_origin.1
loadphfig(3)
load a new physical cell model from disk man1/alc_origin.1
lrz(1), rx(1), rb(1), rz(1)
XMODEM, YMODEM, ZMODEM (Batch) file receive
lsz(1), sx(1), sb(1), sz(1)
XMODEM, YMODEM, ZMODEM file send
mesh_shader(3), mesh_shader (3)
Change the active shader for a submesh of a model
mfb(3)
model frame buffer interface
mfsarchive(1)
MooseFS archive storage mode management tools
mfscli(1)
CGI in TXT mode
mgetty(8)
smart modem getty
mgnokiidev(8)
links /dev/gnokii to a virtual modem
mjoytest(6)
test the svgalib joystick package in graphics mode
mmh-intro(7), mmh(7)
Introduction to the Modern MH message system
mod2html(1), mod2html.pl(1)
Generates HTML view of messages to be moderated
modbus_rtu_get_rts(3)
get the current RTS mode in RTU
modbus_rtu_get_serial_mode(3)
get the current serial mode
modbus_rtu_set_rts(3)
set the RTS mode in RTU
modbus_rtu_set_serial_mode(3)
set the serial mode
modbus_set_error_recovery(3)
set the error recovery mode
mode2(1), smode2(1), xmode2(1)
shows the pulse/space length of infrared signals
mode3(8)
set a vesa mode
modelmbkrds(3)
gets all models of instances contained in a figure. man1/alc_origin.1
moderators(5)
Submission addresses for moderated groups
modesetting(4)
video driver for framebuffer device
moka(1), MOKA(1)
Model checker ancestor man1/alc_origin.1
move3d_model(3), move3d_model (3)
Set new world-space coordinates for the specified model
mpb(1)
compute eigenmodes of periodic dielectric structures
mpb-split(1)
compute eigenmodes with MPB using multiple processes
mtbatch(1)
Sends SMS in batch mode
murphi2c(1)
translate a Murphi model to C for simulation
murphi2murphi(1)
preprocessor for Murphi models
murphi2xml(1)
Print the abstract syntax tree of a parsed Murphi model
mzip(1)
change protection mode and eject disk on Zip/Jaz drive '" t TQ \$1 . (is' (if` (pd"
ncid-initmodem(1)
use ncidd to reinitialize modem to Caller ID mode
net_listen(3), net_listen (3)
Setup a network frameserver in listening mode
new_3dmodel(3), new_3dmodel (3)
Allocate a VID and 3D Model container
notcurses(3)
TUI library for modern terminal emulators
obabel(1)
a converter for chemistry and molecular modeling data files
open_nonblock(3), open_nonblock (3)
Open a file in read or write mode for non-blocking text I/O
openssn(6)
modern submarine tactical simulator
orient3d_model(3), orient3d_model (3)
Set the base orientation for the specified model
pack_fopen(3)
Opens a file according to mode. Allegro game programming library
panda_entergraphicsmode(3)
make sure the page description stream is in graphics mode
panda_exitgraphicsmode(3)
make sure the page description stream is out of graphics mode
panda_fullscreen(3)
ask the viewer to display the PDF document in fullscreen mode
panda_nfspagemodde(3)
defines display characteristics for the PDF document if it is using non fullscreen mode after defaulting to fullscreen mode
panda_setfontmode(3)
set the current font mode
pbs_gpumode(3)
change GPU mode
pcap_can_set_rfmon(3)
check whether monitor mode can be set for a not-yet-activated capture handle
pcap_set_immediate_mode(3)
set immediate mode for a not-yet-activated capture handle
pcap_set_promisc(3)
set promiscuous mode for a not-yet-activated capture handle
pcap_set_rfmon(3)
set monitor mode for a not-yet-activated capture handle
pcap_setnonblock(3), pcap_getnonblock(3)
set or get the state of non-blocking mode on a capture device
pfstmo_pattanaik00(1)
Time-dependent Visual Adaptation Model
pocketsphinx_batch(1)
Run speech recognition in batch mode
pocketsphinx_continuous(1)
Run speech recognition in continuous listening mode
pocketsphinx_mdef_convert(1)
Convert text-format model definition files to and from PocketSphinx format
protracker(1)
Amiga ProTracker v2.3D clone for modern computers
pskc_get_device_model(3)
API function
pskc_get_key_policy_pinusagemode(3)
API function
pskc_pinusagemode2str(3)
API function
pskc_set_device_model(3)
API function
pskc_set_key_policy_pinusagemode(3)
API function
pskc_str2pinusagemode(3)
API function
qemu-cpu-models(7)
QEMU CPU Models
qgpumode(1)
change GPU mode
racluster(5), racluster.conf(5)
racluster flow model definitions
regtree(1)
Text-mode registry viewer
request_refresh_rate(3)
Requests a specific refresh rate during graphic mode switch. Allegro game programming library
restorefont(1)
save or restore the SVGA font for textmode
restorepalette(1)
set the color palette for textmode
restoretextmode(1)
save or restore the SVGA registers for textmode
rods(l)
Raster3D preprocessor for ball-and-stick models
roff2dvi(1)
transform roff code into dvi mode t .ds EL N'188'" .ds EL .|.|."
roff2html(1)
transform roff code into html mode t .ds EL N'188'" .ds EL .|.|."
roff2pdf(1)
transform roff code into pdf mode t .ds EL N'188'" .ds EL .|.|."
roff2ps(1)
transform roff code into ps mode t .ds EL N'188'" .ds EL .|.|."
roff2text(1)
transform roff code into text mode t .ds EL N'188'" .ds EL .|.|."
roff2x(1)
transform roff code into x mode t .ds EL N'188'" .ds EL .|.|."
rofi-script(5), rofi script mode(5)
Rofi format for scriptable modi
rotate3d_model(3), rotate3d_model (3)
Set the current rotation for the specified model
rsyncd.conf(5)
configuration file for rsync in daemon mode
rumur(1)
Yet another explicit state model checker
runx(1)
try to overcome problems of Xfree96 restoring textmode using svgalib
samechflags(1)
change file flags samechmod change file modes samechown change file owner and group samecp copies the first file of a pair of duplicate files samedelay delays line output until the files are no longer in use sameln links duplicate files together samemv moves the first file of a pair of duplicate files samerm remove the last of a pair of duplicate files
sane-artec_eplus48u(5)
SANE backend for the scanner Artec E+ 48U and re-badged models
savetextmode(1), textmode(1)
save or restore the complete SVGA status for textmode
scale3d_model(3), scale3d_model (3)
Apply or schedule a scale transform on a 3D model
scale_3dvertices(3), scale_3dvertices (3)
Statically scale the vertex values of the specified model
sdparm(8)
access SCSI modes pages; read VPD pages; send simple SCSI commands
sendfax(8)
send group 3 fax files (G3 files) with a class 2 faxmodem
set_add_blender(3)
Enables an additive blender mode. Allegro game programming library
set_alpha_blender(3)
Enables a special alpha-channel blending mode. Allegro game programming library
set_blender_mode(3)
Specifies a custom set of truecolor blender routines. Allegro game programming library
set_blender_mode_ex(3)
An even more complex version of set_blender_mode(). Allegro game programming library
set_burn_blender(3)
Enables a burn blender mode. Allegro game programming library
set_color_blender(3)
Enables a color blender mode. Allegro game programming library
set_difference_blender(3)
Enables a difference blender mode. Allegro game programming library
set_display_switch_mode(3)
Tells Allegro how the program handles background switching
set_dissolve_blender(3)
Enables a dissolve blender mode. Allegro game programming library
set_dodge_blender(3)
Enables a dodge blender mode. Allegro game programming library
set_gfx_mode(3)
Sets a graphic video mode. Allegro game programming library
set_hue_blender(3)
Enables a hue blender mode. Allegro game programming library
set_invert_blender(3)
Enables an invert blender mode. Allegro game programming library
set_luminance_blender(3)
Enables a luminance blender mode. Allegro game programming library
set_multiply_blender(3)
Enables a multiply blender mode. Allegro game programming library
set_saturation_blender(3)
Enables a saturation blender mode. Allegro game programming library
set_screen_blender(3)
Enables a screen blender mode. Allegro game programming library
set_write_alpha_blender(3)
Enables the special alpha-channel editing mode. Allegro game programming library
sg_modes(8)
reads mode pages with SCSI MODE SENSE command
sg_rdac(8)
display or modify SCSI RDAC Redundant Controller mode page
sg_wr_mode(8)
write (modify) SCSI mode page
sharpconstruct(1)
Interactive 3D modeling package
simpleDemo(man), simpleDemoDemonstrates(man)
how to use the ExmSimple demonstration widget in a simple application
slack-diff(1)
compare file contents, modes, etc
smenc(1)
Program to encode a wav file into a SpectMorph model
smplay(1)
Program to play a SpectMorph model
smsfimport(1)
program to create SpectMorph models from SoundFont presets
smstrip(1)
program to remove extra data from SpectMorph model files
smv(1)
symbolic model verifier
socket_quickack(3)
turn TCP Quick ACK mode on or off
solid_mode(3)
Shortcut for selecting solid drawing mode. Allegro game programming library
step3d_model(3), step3d_model (3)
Move forwards and sidewards
strafe3d_model(3), strafe3d_model (3)
Move the specified model sideways in relation to its current viewing angle
svidtune(6)
tunes svgalib modes
switch_default_blendmode(3), switch_default_blendmode (3)
Change the blend operation set as default on all new objects
switch_default_imageproc(3), switch_default_imageproc (3)
Set the default image post-processing mode
switch_default_scalemode(3), switch_default_scalemode (3)
Change the default scale-mode for newly loaded images
switch_default_texfilter(3), switch_default_texfilter (3)
Switch the default texture filtering mode for all newly created objects
switch_default_texmode(3), switch_default_texmode (3)
Switch how the associated texture storage should treat coordinates outside the [0..1] range
swizzle_model(3), swizzle_model (3)
Modify the vertices of the specified model to reverse the winding order
syslog-ng-ctl(1)
Display message statistics and enable verbose, debug and trace modes in
talkfilters(1), b1ff(1), brooklyn(1), chef(1), cockney(1), drawl(1), fudd(1), funetak(1), jethro(1), jive(1), kraut(1), pansy(1), pirate(1), postmodern(1), redneck(1), valspeak(1), warez(1)
GNU talk filters
target_framemode(3), target_framemode (3)
Hint to the target frameserver to restrict frame delivery
target_graphmode(3), target_graphmode (3)
Switch graphing mode for target frameserver
target_portconfig(3), target_portconfig (3)
Request that the target frameserver switch input configuration mode for a specific port
termkey_interpret_modereport(3)
interpret opaque mode report data
th_get_pathname(3), th_get_uid(3), th_get_gid(3), th_get_mode(3), th_get_crc(3), th_get_size(3), th_get_mtime(3), th_get_devmajor(3), th_get_devminor(3), th_get_linkname(3)
extract individual fields of a tar header TH_ISREG, TH_ISLNK, TH_ISSYM, TH_ISCHR, TH_ISBLK, TH_ISDIR, TH_ISFIFO - determine what kind of file a tar header refers to TH_ISLONGNAME, TH_ISLONGLINK - determine whether the GNU extensions are in use
th_set_from_stat(3), th_finish(3), th_set_type(3), th_set_path(3), th_set_link(3), th_set_device(3), th_set_user(3), th_set_group(3), th_set_mode(3), th_set_mtime(3), th_set_size(3)
set fields of a tar file header
tig(1)
text-mode interface for Git
tigmanual(7)
text-mode interface for Git
tokyocabinet(3)
a modern implementation of DBM
upscli_ssl(3)
Check SSL mode for current connection
usb_modeswitch(1)
control the mode of 'multi-state' USB devices
vbetool(1)
run real-mode video BIOS code to alter hardware state
vga_addmode(3)
add a mode to svgalib modes list
vga_copytoplanar16(3)
copy linear pixmap into VGA 16 color mode video memory
vga_copytoplanar256(3)
copy linear pixmap into Mode X video memory
vga_copytoplane(3)
copy linear pixmap to some planes of VGA 16 color mode video memory
vga_flip(3)
toggle between text and graphics mode
vga_getcurrentmode(3)
returns the current video mode
vga_getdefaultmode(3)
returns the default graphics mode number
vga_getmodeinfo(3)
returns pointer to mode information structure for a mode
vga_getmodename(3)
return a name for the given video mode
vga_getmodenumber(3)
return a number for the given video mode
vga_gettextfont(3), vga_puttextfont(3)
get/set the font used in text mode
vga_gettextmoderegs(3), vga_settextmoderegs(3)
get/set the vga state used in text mode
vga_hasmode(3)
returns if a video mode is supported
vga_lastmodenumber(3)
returns the last video mode number
vga_setlinearaddressing(3)
switch to linear addressing mode
vga_setmode(3)
sets a video mode
vga_setmodeX(3)
try to set Mode X-like memory organization
vgatest(6)
makes basic tests on any svgalib graphics mode
video_displaymodes(3), video_displaymodes (3)
Retrieve (or set) platform-specific output display options
videogen(1)
generate Modelines for XFree86 servers
vmod_saintmode(3)
Saint mode backend director
voice_set_playmode(3)
Adjusts the loop status of the specified voice. Allegro game programming library
waybar(5)
sway mode module
wedged(8c)
modem wedged script
wofi(3)
Mode functions and documentation
wofi(7)
Built in modes and other features
wsprd(1)
is a decoder for K1JTs Weak Signal Propagation Reporter (WSPR) mode
xen-tscmode(7)
Xen TSC (time stamp counter) and timekeeping discussion
xkbcli-list(1), xkbcli list(1)
list available XKB models, layouts, variants and options
xor_mode(3)
Shortcut for toggling xor drawing mode on and off. Allegro game programming library
xvidtune(1)
video mode tuner for Xorg
yang2dsdl(1)
translates YANG data models to DSDL schemas and validates instance documents
zplay(1)
modem utility to record and play voice files
Ace::Model(3)
Get information about AceDB models
Adapter::Async::Model(3)
helper class for defining models
Alzabo(3)
A data modelling tool and RDBMS-OO mapper
AnyEvent::Strict(3)
force strict mode on for the whole process
App::Netdisco::DB::ExplicitLocking(3)
Support for PostgreSQL Lock Modes
Astro::Coord::ECI::TLE(3)
Compute satellite locations using NORAD orbit propagation models
Biber::Config(3)
Configuration items which need to be saved across the lifetime of a Biber object This class contains a static object and static methods to access configuration and state data. There are several classes of data in here which have separate accessors: * Biber options * Biblatex options * State information used by Biber as it processes entries * displaymode date
Biber::Output::biblatexml(3)
class for biblatexml output of tool mode
Bigtop::Backend::Diagram::GraphvizSql(3)
generates dot language file for data model
Bigtop::Backend::Model(3)
defines legal keywords in table and field blocks
Bigtop::Backend::Model::GantryCDBI(3), [% package_name %](3)
model for [% table_name %] table (stub part)
Bigtop::Backend::Model::GantryDBIxClass(3), [% app_name %]::Model(3)
schema class for [% app_name +%]
Bio::MAGETAB(3)
A data model and utility API for the MAGE-TAB format
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Bio::Phylo::EvolutionaryModels(3)
Evolutionary models for phylogenetic trees and methods to sample these Klaas Hartmann, September 2007
Bio::Phylo::Models::Substitution::Binary(3)
Binary character substitution model
Bio::Phylo::Models::Substitution::Dna(3)
DNA substitution model
Bio::Phylo::Models::Substitution::Dna::F81(3)
Felsenstein (1981) model
Bio::Phylo::Models::Substitution::Dna::GTR(3)
General Time Reversible model
Bio::Phylo::Models::Substitution::Dna::HKY85(3)
Hasegawa, Kishino, Yano (1985) model
Bio::Phylo::Models::Substitution::Dna::JC69(3)
Jukes, Cantor (1969)
Bio::Phylo::Models::Substitution::Dna::K80(3)
Kimura 2-parameter
Bio::Phylo::NeXML::DOM::Document(3)
XML DOM Abstract class for flexible document object model implementation
Bio::Phylo::NeXML::DOM::Element(3)
XML DOM Abstract class for flexible document object model implementation
Bio::Search::HSP::ModelHSP(3)
A HSP object for model-based searches
Bio::Search::Hit::ModelHit(3)
A model-based implementation of the Bio::Search::Hit::HitI interface
Bio::Tools::Run::Phylo::Hyphy::Modeltest(3)
Wrapper around the Hyphy Modeltest analysis
CGI::Application::Plugin::AnyTemplate::ComponentHandler(3)
Embed run modes within a template
CGI::Application::Plugin::AutoRunmode(3)
CGI::App plugin to automatically register runmodes
CGI::Application::Plugin::AutoRunmode::FileDelegate(3)
delegate CGI::App run modes to a directory of files
CGI::Application::Plugin::Forward(3)
Pass control from one run mode to another
CGI::Application::Plugin::ValidateRM(3)
Help validate CGI::Application run modes using Data::FormValidator
CSS::DOM(3)
Document Object Model for Cascading Style Sheets
Catalyst::Component::ACCEPT_CONTEXT(3)
Make the current Catalyst request context available in Models and Views
Catalyst::Enzyme::CRUD::Model(3)
CRUD Model Component
Catalyst::Helper::Model::Adaptor(3)
helper for the incredibly lazy
Catalyst::Helper::Model::CDBI(3)
Helper for CDBI Models
Catalyst::Helper::Model::CDBI::Plain(3)
Helper for CDBI Plain Model
Catalyst::Helper::Model::DBIC::Plain(3)
Helper for DBIC Plain Models
Catalyst::Helper::Model::DBIC::Schema(3)
Helper for DBIC Schema Models
Catalyst::Helper::Model::Enzyme::CDBI(3)
Helper for Catalyst::Enzyme CDBI Models
Catalyst::Helper::Model::Factory(3)
helper for the incredibly lazy
Catalyst::Helper::Model::Factory::PerRequest(3)
helper for the incredibly lazy
Catalyst::Helper::Model::LDAP(3)
Helper for LDAP models
Catalyst::Helper::Model::Oryx(3)
Helper for Oryx Model
Catalyst::Helper::Model::Xapian(3)
Helper for Xapian Model
Catalyst::Model(3)
Catalyst Model base class
Catalyst::Model::Adaptor(3)
use a plain class as a Catalyst model
Catalyst::Model::Adaptor::Base(3)
internal base class for Catalyst::Model::Adaptor and friends
Catalyst::Model::CDBI(3)
[DEPRECATED] CDBI Model Class
Catalyst::Model::CDBI::Plain(3)
A Plain base class for Class::DBI models
Catalyst::Model::CDBI::Sweet(3), Catalyst::Model::CDBI::Sweet(3)
Making sweet things sweeter
Catalyst::Model::DBIC::Plain(3)
DBIC Model Class
Catalyst::Model::DBIC::Schema(3)
DBIx::Class::Schema Model Class
Catalyst::Model::DynamicAdaptor(3)
Dynamically load adaptor modules
Catalyst::Model::Factory(3)
use a plain class as a Catalyst model, instantiating it every time it is requested
Catalyst::Model::Factory::PerRequest(3)
use a plain class as a Catalyst model, instantiating it once per Catalyst request
Catalyst::Model::LDAP(3)
LDAP model class for Catalyst
Catalyst::Model::LDAP::Connection(3)
Convenience methods for Net::LDAP
Catalyst::Model::LDAP::Entry(3)
Convenience methods for Net::LDAP::Entry
Catalyst::Model::LDAP::Search(3)
Convenience methods for Net::LDAP::Search
Catalyst::Model::Memcached(3)
Wrapper for memcached imitating Catalyst models
Catalyst::Model::Oryx(3)
Oryx model component for Catalyst
Catalyst::Model::Role::RunAfterRequest(3)
run code after the response has been sent
Catalyst::Model::Tarantool(3)
DR::Tarantool interface
Catalyst::Model::XML::Feed(3)
Use RSS/Atom feeds as a Catalyst Model
Catalyst::Model::XML::Feed::Item(3)
stores some extra information about each XML feed
Catalyst::Model::Xapian(3)
Catalyst model for Search::Xapian
Catalyst::Plugin::Session::Store::Delegate(3)
Delegate session storage to an application model object
Catalyst::TraitFor::Model::DBIC::Schema::Caching(3)
Query caching support for Catalyst::Model::DBIC::Schema
Catalyst::TraitFor::Model::DBIC::Schema::FromMigration(3)
Use your DB Sandbox to run Catalyst
Catalyst::TraitFor::Model::DBIC::Schema::FromMigration::_MigrationHelper(3)
Trait Helper
Catalyst::TraitFor::Model::DBIC::Schema::PerRequestSchema(3)
Clone the schema with attributes for each requests
Catalyst::TraitFor::Model::DBIC::Schema::Replicated(3)
Replicated storage support for Catalyst::Model::DBIC::Schema
Catalyst::TraitFor::Model::DBIC::Schema::SchemaProxy(3)
Proxy Schema Methods and Options from Model
Chemistry::File::VRML(3)
Generate VRML models for molecules
Class::Tom(3)
The Transportable Object Model for Perl
Config::Model(3)
a framework to validate, migrate and edit configuration files
Config::Model::Annotation(3)
Read and write configuration annotations
Config::Model::AnyId(3)
Base class for hash or list element
Config::Model::AnyThing(3)
Base class for configuration tree item
Config::Model::Backend::Any(3)
Virtual class for other backends
Config::Model::Backend::CdsFile(3)
Read and write config as a Cds data structure
Config::Model::Backend::Fstab(3)
Read and write config from fstab file
Config::Model::Backend::IniFile(3)
Read and write config as a INI file
Config::Model::Backend::Json(3)
Read and write config as a JSON data structure
Config::Model::Backend::PerlFile(3)
Read and write config as a Perl data structure
Config::Model::Backend::PlainFile(3)
Read and write config as plain file
Config::Model::Backend::ShellVar(3)
Read and write config as a "SHELLVAR" data structure
Config::Model::Backend::Yaml(3)
Read and write config as a YAML data structure
Config::Model::BackendMgr(3)
Load configuration node on demand
Config::Model::BackendTrackOrder(3)
Track read order of elements from configuration
Config::Model::CheckList(3)
Handle check list element
Config::Model::Cookbook::CreateModelFromDoc(3)
Create a configuration model from application documentation
Config::Model::Describe(3)
Provide a description of a node element
Config::Model::DumpAsData(3)
Dump configuration content as a perl data structure
Config::Model::Dumper(3)
Serialize data of config tree
Config::Model::Exception(3)
Exception mechanism for configuration model
Config::Model::FuseUI(3)
Fuse virtual file interface for Config::Model
Config::Model::HashId(3)
Handle hash element for configuration model
Config::Model::IdElementReference(3)
Refer to id element(s) and extract keys
Config::Model::Instance(3)
Instance of configuration tree
Config::Model::Iterator(3)
Iterates forward or backward a configuration tree
Config::Model::ListId(3)
Handle list element for configuration model
Config::Model::Lister(3)
List available models and applications
Config::Model::Loader(3)
Load serialized data into config tree
Config::Model::Manual::ModelCreationAdvanced(3)
Creating a model with advanced features
Config::Model::Manual::ModelCreationIntroduction(3)
Introduction to model creation with Config::Model
Config::Model::Node(3)
Class for configuration tree node
Config::Model::ObjTreeScanner(3)
Scan config tree and perform call-backs for each element or node
Config::Model::Report(3)
Reports data from config tree
Config::Model::Role::ComputeFunction(3)
compute &index or &element functions
Config::Model::Role::FileHandler(3)
role to read or write configuration files
Config::Model::Role::Grab(3)
Role to grab data from elsewhere in the tree
Config::Model::Role::HelpAsText(3)
Translate element help from pod to text
Config::Model::Role::NodeLoader(3)
Load Node element in configuration tree
Config::Model::Role::WarpMaster(3)
register and trigger a warped element
Config::Model::SearchElement(3)
Search an element in a configuration model
Config::Model::SimpleUI(3)
Simple interface for Config::Model
Config::Model::TermUI(3)
Interactive command line interface for cme
Config::Model::Tester(3)
Test framework for Config::Model
Config::Model::Tester::Setup(3)
Common test setup functions for Config::Model
Config::Model::TreeSearcher(3)
Search tree for match in value, description
Config::Model::TypeConstraints(3)
Mouse type constraints for Config::Model
Config::Model::Utils::GenClassPod(3)
generate pod documentation from configuration models
Config::Model::Value(3)
Strongly typed configuration value
Config::Model::Value::LayeredInclude(3)
Include a sub layer configuration
Config::Model::ValueComputer(3)
Provides configuration value computation
Config::Model::WarpedNode(3)
Node that change config class properties
Config::Model::Warper(3)
Warp tree properties
Config::Model::models::Fstab(3)
Configuration class Fstab
Config::Model::models::Fstab::FsLine(3)
Configuration class Fstab::FsLine
Config::Model::models::Multistrap(3)
Configuration class Multistrap
Config::Model::models::Multistrap::Section(3)
Configuration class Multistrap::Section
Config::Model::models::PopCon(3)
Configuration class PopCon
Convert::PEM::CBC(3)
Cipher Block Chaining Mode implementation
Crypt::AuthEnc::CCM(3)
Authenticated encryption in CCM mode
Crypt::AuthEnc::ChaCha20Poly1305(3)
Authenticated encryption in ChaCha20-Poly1305 mode
Crypt::AuthEnc::EAX(3)
Authenticated encryption in EAX mode
Crypt::AuthEnc::GCM(3)
Authenticated encryption in GCM mode
Crypt::AuthEnc::OCB(3)
Authenticated encryption in OCBv3 mode
Crypt::CBC(3)
Encrypt Data with Cipher Block Chaining Mode
Crypt::CFB(3)
Encrypt Data in Cipher Feedback Mode
Crypt::Ctr(3)
Encrypt Data in Counter Mode
Crypt::DH::GMP::Compat(3)
Compatibility Mode For Crypt::DH
Crypt::ECB(3)
Use block ciphers using ECB mode
Crypt::Mode(3)
[internal only]
Crypt::Mode::CBC(3)
Block cipher mode CBC [Cipher-block chaining]
Crypt::Mode::CFB(3)
Block cipher mode CFB [Cipher feedback]
Crypt::Mode::CTR(3)
Block cipher mode CTR [Counter mode]
Crypt::Mode::ECB(3)
Block cipher mode ECB [Electronic codebook]
Crypt::Mode::OFB(3)
Block cipher mode OFB [Output feedback]
Crypt::OFB(3)
Encrypt Data using OFB Mode
Crypt::OpenPGP::CFB(3)
PGP Cipher Feedback Mode
DBD::PgLite(3)
PostgreSQL emulation mode for SQLite
DBIx::Class::Tree::AdjacencyList(3)
Manage a tree of data using the common adjacency list model
DBIx::Class::Tree::NestedSet(3)
Manage trees of data using the nested set model
DBIx::Custom::Model(3)
Model object
Data::Entropy::RawSource::CryptCounter(3)
counter mode of block cipher as I/O handle
Data::Model(3)
model interface which had more data sources unified, a.k.a data/object mapper
Data::Model::Driver::Cache::HASH(3)
Penetration cache is offered to the basic driver
Data::Model::Driver::Cache::Memcached(3)
Penetration cache is offered to the basic driver by memcached protocol
Data::Model::Driver::DBI(3)
storage driver for DBI
Data::Model::Driver::DBI::MasterSlave(3)
master-slave composition for mysql
Data::Model::Driver::Memcached(3)
storage driver for memcached protocol
Data::Model::Driver::Memory(3)
storage driver for memory
Data::Model::Driver::Queue::Q4M(3)
Q4M manager for Data::Model
Data::Model::Iterator(3)
Data::Model's iteration class
Data::Model::Mixin(3)
mixin manager for Data::Model
Data::Model::Mixin::FindOrCreate(3)
add find_or_create method
Data::Model::Mixin::Queue::Q4M(3)
add methods for Driver::Queue::Q4M
Data::Model::Row(3)
Data::Model's Row class
Data::Model::Schema(3)
Schema DSL for Data::Model
Data::Model::Transaction(3)
transaction manager for Data::Model
Data::Model::Tutorial::JA(3)
Data::Model::TutorialXXXX
Data::ObjectDriver::BaseObject(3)
base class for modeled objects
Data::Phrasebook::Generic(3)
Base class for Phrasebook Models
Data::Phrasebook::Plain(3)
The Simple Phrasebook Model
Data::Phrasebook::SQL(3)
The SQL/DBI Phrasebook Model
Data::Phrasebook::SQL::Query(3)
Query Extension to the SQL/DBI Phrasebook Model
Devel::REPL(3)
A modern perl interactive shell
Devel::StrictMode(3)
determine whether strict (but slow) tests should be enabled
Device::Gsm(3)
Perl extension to interface GSM phones / modems
Device::Modem(3)
Perl extension to talk to modem devices connected via serial port
Device::Modem::Log::File(3)
Text files logging plugin for Device::Modem class
Device::Modem::Log::Syslog(3)
Syslog logging plugin for Device::Modem class
Device::Modem::UsRobotics(3)
USR modems extensions to control self-mode
DocSet::NavigateCache(3), "DocSet::NavigateCache"(3)
Navigate the DocSet's caches in a readonly mode
File::Stat::ModeString(3)
conversion file stat(2) mode to/from string representation
File::Util::Interface::Modern(3)
Modern call interface to File::Util
File::chmod(3)
Implements symbolic and ls chmod modes
FileHandle::Fmode(3)
determine whether a filehandle is opened for reading, writing, or both
Form::Sensible::Delegation(3)
Understanding Form::Sensible's Delegation model
Gantry::Control::Model::GEN::auth_group_members(3)
model for auth_group_members table
Gantry::Control::Model::GEN::auth_groups(3)
model for auth_groups table
Gantry::Control::Model::GEN::auth_pages(3)
model for auth_pages table
Gantry::Control::Model::GEN::auth_users(3)
model for auth_users table
Gantry::Control::Model::auth_group_members(3)
Model Component for auth_group_members table
Gantry::Control::Model::auth_group_members(3)
model for auth_group_members table
Gantry::Control::Model::auth_groups(3)
model for auth_groups table
Gantry::Control::Model::auth_groups_cdbi(3), Gantry::Control::Model::auth_groups-(3)
Model Component for the auth_groups table
Gantry::Control::Model::auth_pages(3)
Model Component for the auth_pages table
Gantry::Control::Model::auth_pages(3)
model for auth_pages table
Gantry::Control::Model::auth_users(3)
Model Component for auth_users Control table
Gantry::Control::Model::auth_users(3)
model for auth_users table
Gantry::Utils::AuthCDBI(3)
Class::DBI base model for Gantry Auth
Gantry::Utils::DBIxClass(3)
a DBIx::Class subclass models can inherit from
Gantry::Utils::Model(3)
a general purpose Object Relational Model base class
Gantry::Utils::Model::Auth(3)
base class for auth database modelers
Gantry::Utils::Model::Regular(3)
base class for database modelers
Gantry::Utils::ModelHelper(3)
mixin for model base classes
Genezzo::gendba(3), gendba.pl(3)
line mode for Genezzo database system
GeoIP2::Model::ASN(3)
Model class for the GeoLite2 ASN database
GeoIP2::Model::AnonymousIP(3)
Model class for the GeoIP2 Anonymous IP database
GeoIP2::Model::City(3)
Model class for GeoIP2 Precision: City and GeoIP2 City
GeoIP2::Model::ConnectionType(3)
Model class for the GeoIP2 Connection Type database
GeoIP2::Model::Country(3)
Model class for the GeoIP2 Precision: Country and GeoIP2 Country
GeoIP2::Model::Domain(3)
Model class for the GeoIP2 Domain database
GeoIP2::Model::Enterprise(3)
Model class for GeoIP2 Enterprise
GeoIP2::Model::ISP(3)
Model class for the GeoIP2 ISP database
GeoIP2::Model::Insights(3)
Model class for GeoIP2 Precision: Insights
Goo::Canvas::EllipseModel(3)
wrapper for GooCanvasEllipseModel
Goo::Canvas::GroupModel(3)
wrapper for GooCanvasGroupModel
Goo::Canvas::ImageModel(3)
wrapper for GooCanvasImageModel
Goo::Canvas::ItemModel(3)
wrapper for GooCanvasItemModel
Goo::Canvas::PathModel(3)
wrapper for GooCanvasPathModel
Goo::Canvas::PolylineModel(3)
wrapper for GooCanvasPolylineModel
Goo::Canvas::RectModel(3)
wrapper for GooCanvasRectModel
Goo::Canvas::TableModel(3)
wrapper for GooCanvasTableModel
Goo::Canvas::TextModel(3)
wrapper for GooCanvasTextModel
Goo::DatabaseObject(3)
Bridge between relational and OO model
Goo::TeamManager(3)
Model the Team: who? what? why? where? how?
Goo::Thing::pm::Method(3)
Object for modelling methods
Goo::Thing::pm::Perl5(3)
Model Perl5 reserved words
Graphics::Color::CMYK(3)
CMYK color model
Graphics::Color::RGB(3)
RGB color model
Gtk2::TreeModel(3)
wrapper for GtkTreeModel
Gtk2::TreeModelFilter(3)
wrapper for GtkTreeModelFilter
Gtk2::TreeModelSort(3)
wrapper for GtkTreeModelSort
HTML5::DOM(3), HTML5::DOM <https://metacpan.org/pod/HTML5::DOM>(3)
Super fast html5 DOM library with css selectors (based on Modest/MyHTML)
HTML::DOM(3)
A Perl implementation of the HTML Document Object Model
HTML::Entities::ImodePictogram(3)
encode / decode i-mode pictogram
HTML::Entities::ImodePictogram(3)
i-modeÍѳ¨Ê¸»ú¤Î¥¨¥ó¥³¡¼¥É/¥Ç¥³¡¼¥É
HTML::FormFu::Constraint::DBIC::Unique(3)
unique constraint for HTML::FormFu::Model::DBIC
HTML::FormFu::Model(3)
base class for models
HTML::FormFu::Model::DBIC(3)
Integrate HTML::FormFu with DBIx::Class
HTML::FormFu::Model::HashRef(3)
handle hashrefs
HTML::FormFu::Role::Element::ProcessOptionsFromModel(3)
process_options_from_model role
HTML::FormHandler::Model(3)
default model base class
HTML::FormHandler::Model::CDBI(3)
Class::DBI model class (non-functioning)
HTML::FormHandler::Model::DBIC(3)
base class that holds DBIC model role
HTML::FormHandler::Model::DBIC::TypeMap(3)
type mape for DBICFields
HTML::FormHandler::Model::Object(3)
stub for Object model
HTML::FormHandler::TraitFor::Model::DBIC(3)
model role that interfaces with DBIx::Class
HTML::Shakan::Model::DBIxSkinny(3)
DBIx::Skinny binding for HTML::Shakan
HTML::Shakan::Model::DataModel(3)
Data::Model bindings for Shakan
HTML::StickyQuery::DoCoMoGUID(3)
add guid query for DoCoMo imode
Imager::ImageTypes(3)
image models for Imager
Jifty::DBI::Record::Plugin(3)
Record model mixins for Jifty::DBI
Jifty::Manual::Models(3)
Managing your datastore
Jifty::Manual::ObjectModel(3)
-- An overview of the Jifty object model
Jifty::Model::Metadata(3)
Tracks Jifty-related metadata
Jifty::Model::Session(3)
Jifty session tracking
Jifty::Model::SessionCollection(3)
Specialized handling of the session collection
Jifty::Plugin::ActorMetadata(3)
add created_by created_on updated_by updated_on columns to a model class
Jifty::Plugin::ActorMetadata::Mixin::Model::ActorMetadata(3)
ActorMetadata mixin
Jifty::Plugin::Authentication::Password::Mixin::Model::User(3)
password plugin user mixin model
Jifty::Plugin::RequestInspector::Model::Request(3)
Persistent storage for the request inspector
Jifty::Plugin::User(3)
Plugin for building user models
Jifty::Plugin::User::Mixin::Model::User(3)
user model base mixin
Jifty::Script::Model(3)
Add a model class to your Jifty application
Jifty::View::Declare::CRUD(3)
Provides typical CRUD views to a model
Jonk::Cookbook::ForkModel(3)
with Parallel::Prefork
LaTeX::Table::Themes::Modern(3)
Modern LaTeX table themes
LaTeXML::Common::Color(3), "LaTeXML::Common::Color"(3)
abstract class representating colors using various color models; extends LaTeXML::Common::Object
LaTeXML::Common::Color::Derived(3), "LaTeXML::Common::Color::Derived"(3)
represents colors in derived color models
LaTeXML::Common::Color::cmy(3), "LaTeXML::Common::Color::cmy"(3)
represents colors in the cmy color model: cyan, magenta and yellow [0..1]; extends LaTeXML::Common::Color
LaTeXML::Common::Color::cmyk(3), "LaTeXML::Common::Color::cmyk"(3)
represents colors in the cmyk color model: cyan, magenta, yellow and black in [0..1]; extends LaTeXML::Common::Color
LaTeXML::Common::Color::gray(3), "LaTeXML::Common::Color::gray"(3)
represents colors in the gray color model: gray value in [0..1]; extends LaTeXML::Common::Color
LaTeXML::Common::Color::hsb(3), "LaTeXML::Common::Color::hsb"(3)
represents colors in the hsb color model: hue, saturation, brightness in [0..1]; extends LaTeXML::Common::Color
LaTeXML::Common::Color::rgb(3), "LaTeXML::Common::Color::rgb"(3)
represents colors in the rgb color model: red, green and blue in [0..1]; extends LaTeXML::Common::Color
LaTeXML::Common::Model(3), "LaTeXML::Common::Model"(3)
represents the Document Model
LaTeXML::Common::Model::DTD(3), "LaTeXML::Common::Model::DTD"(3)
represents DTD document models; extends LaTeXML::Common::Model
LaTeXML::Common::Model::RelaxNG(3), "LaTeXML::Common::Model::RelaxNG"(3)
represents RelaxNG document models; extends LaTeXML::Common::Model
Lingua::Treebank::Const(3)
Object modeling constituent from a treebank
MCE::Flow(3)
Parallel flow model for building creative applications
MCE::Grep(3)
Parallel grep model similar to the native grep function
MCE::Loop(3)
MCE model for building parallel loops
MCE::Map(3)
Parallel map model similar to the native map function
MCE::Step(3)
Parallel step model for building creative steps
MCE::Stream(3)
Parallel stream model for chaining multiple maps and greps
MPI_File_get_amode(3)
Returns access mode associated with an open file
MPI_Irecv(3)
Starts a standard-mode, nonblocking receive
MPI_Irsend(3)
Starts a ready-mode nonblocking send
MPI_Isend(3)
Starts a standard-mode, nonblocking send
MPI_Recv(3)
Performs a standard-mode blocking receive
MPI_Send(3)
Performs a standard-mode blocking send
Mail::AuthenticationResults::FoldableHeader(3)
Class for modelling a foldable header string
Mail::AuthenticationResults::Header(3)
Class modelling the Entire Authentication Results Header set
Mail::AuthenticationResults::Header::AuthServID(3)
Class modelling the AuthServID part of the Authentication Results Headerr
Mail::AuthenticationResults::Header::Base(3)
Base class for modelling parts of the Authentication Results Header
Mail::AuthenticationResults::Header::Comment(3)
Class modelling Comment parts of the Authentication Results Header
Mail::AuthenticationResults::Header::Entry(3)
Class modelling Main Entry parts of the Authentication Results Header
Mail::AuthenticationResults::Header::Group(3)
Class modelling Groups of Authentication Results Header parts
Mail::AuthenticationResults::Header::SubEntry(3)
Class modelling Sub Entry parts of the Authentication Results Header
Mail::AuthenticationResults::Header::Version(3)
Class modelling the AuthServID part of the Authentication Results Header
Mail::AuthenticationResults::Token(3)
Base class for modelling AuthenticationResults Header parts
Mail::AuthenticationResults::Token::Assignment(3)
Class for modelling AuthenticationResults Header parts detected as assignments
Mail::AuthenticationResults::Token::Comment(3)
Class for modelling AuthenticationResults Header parts detected as comments
Mail::AuthenticationResults::Token::QuotedString(3)
Class for modelling AuthenticationResults Header parts detected as quoted strings
Mail::AuthenticationResults::Token::Separator(3)
Class for modelling AuthenticationResults Header parts detected as separators
Mail::AuthenticationResults::Token::Space(3)
Class for modelling AuthenticationResults Header parts detected as spaces
Mail::AuthenticationResults::Token::String(3)
Class for modelling AuthenticationResults Header parts detected as strings
Marpa::Advanced::Models(3)
Other Input Models
Marpa::PP::Advanced::Models(3)
Other Input Models
Marpa::XS::Advanced::Models(3)
Other Input Models
Math::GSL::Fit(3)
Least-squares functions for a general linear model with one- or two-parameter regression
Math::GSL::Multifit(3)
Least-squares functions for a general linear model with multiple parameters
Maypole::Manual::Model(3)
Maypole Model Classes
Maypole::Model::Base(3)
Base class for model classes
Maypole::Model::CDBI(3)
Model class based on Class::DBI
Maypole::Model::CDBI::AsForm(3), Maypole::Model:CDBI::AsForm(3)
Produce HTML form elements for database columns
Maypole::Model::CDBI::Base(3)
Model base class based on Class::DBI
Maypole::Model::CDBI::DFV(3)
Class::DBI::DFV model for Maypole
Maypole::Model::CDBI::FromCGI(3), Maypole::Model:CDBI::FromCGI(3)
Validate form input and populate Model objects
Maypole::Model::CDBI::Plain(3)
Class::DBI model without ::Loader
Modern::Perl(3)
enable all of the features of Modern Perl with one import
MojoMojo::Model::DBIC(3)
DBIC::Schema Catalyst model
MojoMojo::Model::Search(3)
support for searching pages
MojoMojo::Model::Themes(3)
support for Thematic styles
Moose(3)
A postmodern object system for Perl 5
Moose::Cookbook::Basics::Company_Subtypes(3)
Demonstrates the use of subtypes and how to model classes related to companies, people, employees, etc
Net::DRI::Data::Contact(3)
Handle contact data, modeled from EPP for Net::DRI
Net::Frame::Dump::Offline(3)
tcpdump like implementation, offline mode
Net::Frame::Dump::Online(3)
tcpdump like implementation, online mode
Net::Frame::Dump::Online2(3)
tcpdump like implementation, online mode and non-blocking
Net::Frame::Dump::Writer(3)
tcpdump like implementation, writer mode
Net::IMAP::Server::DefaultModel(3)
Encapsulates per-connection information about the layout of IMAP folders
Net::SSH::Perl::Cipher::AES_CTR(3), Net::SSH::Perl::Cipher::AES(3)
Base class for AES support using CTR (counter) mode
Net::SSH::Perl::Cipher::CTR(3)
Counter Mode Implementation
Number::Fraction(3)
Perl extension to model fractions
Ocsinventory::Agent::Common(3)
give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
OpenXPKI::Server::Workflow::Condition::KeyGenerationMode(3)
Check if the profile allows key generation as specified by the "generate" parameter. Example: can_use_server_key: class: OpenXPKI::Server::Workflow::Condition::KeyGenerationMode param: generate: server _map_profile: $cert_profile Returns true if the key generation setting is either escrow, server or both. The setting is obtained for the given profile (by profile or from the default setting) from the node key.generate. If this node is missing, client is allowed and server is assumed ok if key.alg is not empty. If the profile parameter is not given in the configuration, the context value of cert_profile is used
Oryx(3)
Meta-Model Driven Object Persistance with Multiple Inheritance
OurNet::BBS(3)
Component Object Model for BBS systems
PDF::Builder::Resource::ColorSpace::Indexed(3)
base colorspace support for indexed color models. Inherits from PDF::Builder::Resource::ColorSpace
Paws::MachineLearning::CreateMLModel(3)
Arguments for method CreateMLModel on Paws::MachineLearning
Paws::MachineLearning::DeleteMLModel(3)
Arguments for method DeleteMLModel on Paws::MachineLearning
Paws::MachineLearning::DescribeMLModels(3)
Arguments for method DescribeMLModels on Paws::MachineLearning
Paws::MachineLearning::GetMLModel(3)
Arguments for method GetMLModel on Paws::MachineLearning
Paws::MachineLearning::UpdateMLModel(3)
Arguments for method UpdateMLModel on Paws::MachineLearning
Perl::Critic::Policy::InputOutput::RequireCheckedOpen(3)
Write "my $error = open $fh, $mode, $filename;" instead of "open $fh, $mode, $filename;"
Pipeline::Segment::Async::Fork(3)
fork model for asynchronous pipeline segments
Pipeline::Segment::Async::Handler(3)
interface for asynchronous segment models
Pipeline::Segment::Async::IThreads(3)
ithread model for asynchronous pipeline segments
Pod::POM(3)
POD Object Model
Pod::Simple::Debug(3)
-- put Pod::Simple into trace/debug mode
RDF::Core::Model(3)
RDF model
RDF::Core::Model::Parser(3)
interface between model and RDF::Core::Parser
RDF::Core::Model::Serializer(3), RDF::Core::Model::Serializer(3)
interface between model and RDF::Core::Serializer
RDF::Core::ModelSet(3)
RDF model set
RDF::Core::Serializer(3)
produce XML code for RDF model
RDF::Notation3::RDFCore(3)
creates a RDF::Core model from an N3 file
RDF::Notation3::RDFStore(3)
creates a RDFStore model from an N3 file
RDF::Trine::Model(3)
Model class
RDF::Trine::Model::Dataset(3)
Model for SPARQL datasets
RDF::Trine::Model::StatementFilter(3)
Model for filtering statements based on a user-specified criteria
RDF::Trine::Model::Union(3)
Union models for joining multiple stores together
RDF::Trine::Serializer::NTriples::Canonical(3)
Canonical representation of an RDF model
RDFStore::Model(3)
An implementation of the Model RDF API using tied hashes and implementing free-text search on literals
RDFStore::Object(3)
A very useful abstration over an RDFStore::Model
RDFStore::Parser::Styles::RDFStore::Model(3)
This module is a RDFStore::Parser::SiRPAC(3) filter to ingest records into an RDFStore::Model(3)
RDFStore::SchemaModel(3)
implementation of the SchemaModel RDF API
RDFStore::Serializer(3)
Interface to an RDF model/graph serializer
RDFStore::Serializer::NTriples(3), RDFStore::Serilizer::NTriples(3)
Serialise a model/graph to W3C RDF Test Cases N-Triples syntax
RDFStore::Serializer::RDFXML(3), RDFStore::Serilizer::RDFXML(3)
Serialise a model/graph to W3C RDF/XML syntax
RDFStore::Serializer::RSS(3), RDFStore::Serilizer::RSS(3)
Serialise a model/graph to its XML RSS1.0 representation
RDFStore::VirtualModel(3)
implementation of the VirtualModel RDF API
Reaction::InterfaceModel::Action::Search::UpdateSpec(3)
Update search specification
Reaction::InterfaceModel::Collection(3)
Generic collections of Reaction::InterfaceModel::Objects
Reaction::InterfaceModel::Collection::Persistent(3)
Base class for Presistent Collections
Reaction::InterfaceModel::Collection::Virtual(3)
Base class for Virtual Collections
Reaction::InterfaceModel::Reflector::DBIC(3)
Automatically Generate InterfaceModels from DBIx::Class models
Reaction::UI::Controller::Collection::CRUD(3)
Basic CRUD functionality for Reaction::InterfaceModel data
Reaction::UI::ViewPort::Object(3)
Display an InterfaceModel::Object
Reaction::UI::ViewPort::Object::Mutable(3)
Allow the user to to perform an InterfaceModel Action
SNMP::Info::DocsisCM(3)
SNMP Interface for DOCSIS Cable Modems n .SH "DESCRIPTION SNMP::Info::DocsisCM is a subclass of SNMP::Info that provides info about a given cable modem. Extracts data from the sysDescr, which is mandated in the DOCSIS specification to match ""HW_REV: <value>; VENDOR: <value>; BOOTR: <value>; SW_REV: <value>; MODEL: <value>""" .SH "DESCRIPTION SNMP::Info::DocsisCM is a subclass of SNMP::Info that provides info about a given cable modem. Extracts data from the sysDescr, which is mandated in the DOCSIS specification to match ``HW_REV: <value>; VENDOR: <value>; BOOTR: <value>; SW_REV: <value>; MODEL: <value>''" Header "DESCRIPTION SNMP::Info::DocsisCM is a subclass of SNMP::Info that provides info about a given cable modem. Extracts data from the sysDescr, which is mandated in the DOCSIS specification to match HW_REV: <value>; VENDOR: <value>; BOOTR: <value>; SW_REV: <value>; MODEL: <value>"
SOAP::WSDL::Definitions(3)
model a WSDL >definitions< element
STEP(5)
ISO 10303 Standard for the Exchange of Product model data
SVG::DOM(3)
A library of DOM (Document Object Model) methods for SVG objects
Servlet::SingleThreadModel(3)
serialized servlet access interface
Stat::lsMode(3)
format file modes like the "ls -l" command does
Statistics::Basic::Mode(3)
find the mode of a list
Template::Plugin::Pod(3)
Plugin interface to Pod::POM (Pod Object Model)
Term::ReadLine::Zoid::Emacs(3)
a readline emacs mode
Term::ReadLine::Zoid::FileBrowse(3)
a readline file browser mode
Term::ReadLine::Zoid::ISearch(3)
a readline incremental search mode
Term::ReadLine::Zoid::ViCommand(3)
a readline command mode
Test2::IPC::Driver::Files(3)
Temp dir + Files concurrency model
Test::Modern(3)
precision testing for modern perl
Test::TAP::HTMLMatrix(3)
Creates colorful matrix of Test::Harness friendly test run results using Test::TAP::Model
Test::TAP::Model(3)
DEPRECATED Use TAP::Harness, TAP::Formatter::HTML
Test::TAP::Model::Colorful(3)
Creates color from something that knows it's success ratio
Test::TAP::Model::Consolidated(3)
The unification of several Test::TAP::Model reports
Test::TAP::Model::File(3)
an object representing the TAP results of a single test script's output
Test::TAP::Model::File::Visual(3)
A test file with additional display oriented methods
Test::TAP::Model::Subtest(3)
An object for querying a test case
Test::TAP::Model::Subtest::Visual(3)
A subtest with additional display oriented methods
Test::TAP::Model::Visual(3)
A result set that will create ::Visual children, and knows it's color
Text::Metaphone(3)
A modern soundex. Phonetic encoding of words
UI::Dialog::Backend::ASCII(3)
Dialog backend for the native Perl mode of basic text
VCP::UI(3)
User interface framework for interactive mode VCP
WWW::MobileCarrierJP::EZWeb::Model(3)
Model(EZweb)
X11::Protocol::Ext::MIT_SUNDRY_NONSTANDARD(3)
X11R2/R3 compatibility mode
XML::DOM2::DOM::Element(3)
A library of DOM (Document Object Model) methods for XML Elements
XML::Pastor::Generator(3)
Module used internally by XML::Pastor for generating Perl code from a schema model
XML::Pastor::Schema::Model(3)
Class representing an internal W3C schema model (info set) for XML::Pastor
XML::Pastor::Schema::Parser(3)
Module for parsing a W3C XSD schema into an internal schema model
XML::Twig(3)
A perl module for processing huge XML documents in tree mode
admsXml(1)
An automatic device model synthesizer
bin2ecm(1)
encoder and decoder for the error code modeler format
bk-chmod(1), bk chmod(1)
change the mode of a file and save it
bk-emacs(1), bk emacs(1)
info on how to use emacs' vc-mode
breakpoint(1)
launch debug mode
brlcad(1)
BRL-CAD programs for solid modeling, raytracing, graphics, and image processing
caffeine(1)
A status bar application able to temporarily prevent the activation of both the screensaver and the "sleep" powersaving mode
center(nged)
Positions the center of the mged viewing cube at the specified model coordinates
comgeom-g(1)
convert GIFT COMGEOM model into MGED database
dup(nged)
Checks the specified file (which is expected to contain a BRL-CAD model) for names that are the same as those in the current model
eac(nged)
Adds all the regions in the current model that have one of the aircodes in the argument list to the display list so that they will appear on the MGED display
erlang_mode(3), erlang.el(3)
Erlang mode for Emacs
fcall(3), Fcall(3), convS2M(3), convD2M(3), convM2S(3), convM2D(3), fcallfmt(3), dirfmt(3), dirmodefmt(3), read9pmsg(3), statcheck(3), sizeS2M(3), sizeD2M(3)
interface to Plan 9 File protocol
fish-doc(1)
fish-shell Documentation This is the documentation for fish, the friendly interactive shell. A shell is a program that helps you operate your computer by starting other programs. fish offers a command-line interface focused on usability and interactive use. Unlike other shells, fish does not follow the POSIX standard, but still uses roughly the same model. Some of the special features of fish are: 0.0 (bu 2 Extensive UI: %Syntax highlighting, %autosuggestions, %tab completion and selection lists that can be navigated and filtered. (bu 2 No configuration needed: fish is designed to be ready to use immediately, without requiring extensive configuration. (bu 2 Easy scripting: New %functions can be added on the fly. The syntax is easy to learn and use. This page gives an overview of fish(aqs features, syntax, and interface. If this is your first time using fish, see the tutorial. If you are already familiar with other shells like bash and want to see the scripting differences, see Fish For Bash Users. This section describes how to install, uninstall, start, and exit the fish shell. It also explains how to make fish the default shell
fish_mode_prompt(1)
define the appearance of the mode indicator
g-shell-rect(1)
Produce triangulated shell from BRL-CAD model
g-x3d(1)
Perform Boolean evaluations to produce an X3D facetted model
g.gui.gmodeler(1), g.gui.gmodeler (1)
Graphical Modeler. Allows interactively creating, editing and managing models
gendba.pl(1)
line mode for Genezzo database system
gr(nged), dg(nged)
Add or remove primitives or primitive parents from a group using a GUI selection box. dg exits grouper mode
i.ortho.elev(1), i.ortho.elev (1)
Select or modify the target elevation model
ill(nged)
Performs the function of selecting an object after entering solid (i.e., primitive)illuminate or object illuminate mode
jrunscript(1)
Runs a command-line script shell that supports interactive and batch modes. This command is experimental and unsupported
modemtest(1)
Tool to examining your modem through Perl's Device::SerialPort
mrot(nged)
Rotates the view using model x y z
nirt(1)
interactively ray trace a BRL-CAD geometric model
odern::Perl(3)
Module for enabling all of the features of Modern Perl
oed(nged)
Places MGED directly into the matrix edit mode
openra(6)
An Open Source modernization of the early 2D Command & Conquer games
oscale(nged)
This command of matrix edit mode modifies the matrix to perform a uniform scale operation
r.drain(1), r.drain (1)
Traces a flow through an elevation model or cost surface on a raster map
r.horizon(1), r.horizon (1)
Computes horizon angle height from a digital elevation model. The module has two different modes of operation: 1. Computes the entire horizon around a single point whose coordinates are given with the (cqcoord(cq option. The horizon height (in radians). 2. Computes one or more raster maps of the horizon height in a single direction. The input for this is the angle (in degrees), which is measured counterclockwise with east=0, north=90 etc. The output is the horizon height in radians
r.in.gridatb(1), r.in.gridatb (1)
Imports GRIDATB.FOR map file (TOPMODEL) into a GRASS raster map
r.mode(1), r.mode (1)
Finds the mode of values in a cover map within areas assigned the same category value in a user-specified base map
r.out.gridatb(1), r.out.gridatb (1)
Exports GRASS raster map to GRIDATB.FOR map file (TOPMODEL)
r.out.vrml(1), r.out.vrml (1)
Exports a raster map to the Virtual Reality Modeling Language (VRML)
r.sun(1), r.sun (1)
Solar irradiance and irradiation model. Computes direct (beam), diffuse and reflected solar irradiation raster maps for given day, latitude, surface and atmospheric conditions. Solar parameters (e.g. sunrise, sunset times, declination, extraterrestrial irradiance, daylight length) are saved in the map history file. Alternatively, a local time can be specified to compute solar incidence angle and/or irradiance raster maps. The shadowing effect of the topography is optionally incorporated
r.topmodel(1), r.topmodel (1)
Simulates TOPMODEL which is a physically based hydrologic model
rt(1)
raytrace an mged model, giving a shaded picture
rtcheck(1)
Make UNIX-Plot of overlaps in an mged model, using raytracing
rtedge(1)
ray-traces a model, detects edges, and writes a BRL-CAD color image (.pix) file
rtg3(1)
raytrace a model, writing a COVART (GIFT) 3-component format shotline file
rthide(1)
ray-traces a model and writes a hidden line removed UNIX-Plot file
rtshot(1)
fire one ray at an mged model, for debugging
rtweight(1)
Calculate weight, centroid and volume data for an mged model, using raytracing
rtxray(1)
compute a pseudo X-Ray image of a model
sed(nged)
Places MGED directly into the primitive edit mode
status(nged)
Without a subcommand, the status command returns the following information: current state, view size of the current display manager, the conversion factor from local model units to the base units (mm) stored in the database, and the view matrices of the current display manager
test_configuration.pl(1)
Load your configuration to verify Nagios::Object is compatible with it. -c: path to your main configuration file -l: "relaxed" mode - allow unrecognized attributes on objects, default is strict
tickit_term_set_utf8(3), tickit_term_get_utf8(3)
control UTF-8 mode
tire(1)
Generate a tire model, given standard tire dimensional information
translate(nged)
Used to precisely control the translation of an object in both primitive edit and matrix edit modes
tt_message_arg_mode(3)
return the mode of a message argument
tt_otype_hsig_arg_mode(3)
return the mode of an argument of a request signature of an otype
tt_otype_osig_arg_mode(3)
return the mode of an argument of a notice signature of an otype
umask(1)
set or get the file creation mode mask
vnirt(nged)
Interprets x and y as view coordinates (i.e., +-2047) and converts them to model coordinates (local units) using a value of 2047 for view z before passing them to nirt
vquery_ray(nged)
Interprets x and y as view coordinates (i.e., +-2047) and converts them to model coordinates (local units) using a value of 2047 for view z before passing them to nirt
home | help