Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
Q_SIGNED(3), Q_LTZ(3), Q_PRECEQ(3), Q_QLTQ(3), Q_QLEQ(3), Q_QGTQ(3), Q_QGEQ(3), Q_QEQ(3), Q_QNEQ(3), Q_OFLOW(3), Q_RELPREC(3)
fixed-point math comparison and logic functions
correct the time to allow synchronization of the system clock
cap_fcntls_limit(2), cap_fcntls_get(2)
manage allowed fcntl commands
cap_ioctls_limit(2), cap_ioctls_get(2)
manage allowed ioctl commands
def_prog_mode(3), def_shell_mode(3), reset_prog_mode(3), reset_shell_mode(3), resetty(3), savetty(3), getsyx(3), setsyx(3), ripoffline(3), curs_set(3), napms(3)
low-level curses routines
digittoint(3), isalnum(3), isalpha(3), isascii(3), isblank(3), iscntrl(3), isdigit(3), isgraph(3), ishexnumber(3), isideogram(3), islower(3), isnumber(3), isphonogram(3), isprint(3), ispunct(3), isrune(3), isspace(3), isspecial(3), isupper(3), isxdigit(3), toascii(3), tolower(3), toupper(3)
character classification functions
digittoint_l(3), isalnum_l(3), isalpha_l(3), isascii_l(3), isblank_l(3), iscntrl_l(3), isdigit_l(3), isgraph_l(3), ishexnumber_l(3), isideogram_l(3), islower_l(3), isnumber_l(3), isphonogram_l(3), isprint_l(3), ispunct_l(3), isrune_l(3), isspace_l(3), isspecial_l(3), isupper_l(3), isxdigit_l(3), tolower_l(3), toupper_l(3)
character classification functions
dwarf_arrayorder(3), dwarf_bitoffset(3), dwarf_bitsize(3), dwarf_bytesize(3), dwarf_highpc(3), dwarf_highpc_b(3), dwarf_lowpc(3), dwarf_srclang(3)
retrieve the value of a DWARF attribute
ng_netflow(4) control utility
ibv_create_flow(3), ibv_destroy_flow(3)
create or destroy flow steering rules
lower-case character test
iswalnum(3), iswalpha(3), iswascii(3), iswblank(3), iswcntrl(3), iswdigit(3), iswgraph(3), iswhexnumber(3), iswideogram(3), iswlower(3), iswnumber(3), iswphonogram(3), iswprint(3), iswpunct(3), iswrune(3), iswspace(3), iswspecial(3), iswupper(3), iswxdigit(3)
wide character classification utilities
iswalnum_l(3), iswalpha_l(3), iswcntrl_l(3), iswctype_l(3), iswdigit_l(3), iswgraph_l(3), iswlower_l(3), iswprint_l(3), iswpunct_l(3), iswspace_l(3), iswupper_l(3), iswxdigit_l(3), towlower_l(3), towupper_l(3), wctype_l(3), iswblank_l(3), iswhexnumber_l(3), iswideogram_l(3), iswnumber_l(3), iswphonogram_l(3), iswrune_l(3), iswspecial_l(3), nextwctype_l(3), towctrans_l(3), wctrans_l(3)
wide character classification utilities
krb5_allow_weak_crypto(3), Heimdal(3)
Kerberos 5 cryptography functions
Low-watermark Mandatory Access Control data integrity policy
policy allowing ntpd to run as non-root user
Cisco's NetFlow implementation
netgraph node to separate incoming and outgoing flows
disallow logins
properties_read(3), property_find(3), properties_free(3)
functions to allow creating simple property lists from ASCII file data
allow signals to interrupt system calls
tcsendbreak(3), tcdrain(3), tcflush(3), tcflow(3)
line control functions
upper case to lower case letter conversion
lower case to upper case letter conversion
upper case to lower case letter conversion (wide character version)
lower case to upper case letter conversion (wide character version)
xo_open_marker(3), xo_open_marker_h(3), xo_close_marker(3), xo_close_marker_h(3)
prevent and allow closing of open constructs
Delegates ZFS administration permission for the file systems to non-privileged users
Attaches and detaches ZFS filesystems from FreeBSD jails. A Tn ZFS dataset can be attached to a jail by using the Cm jail subcommand. You cannot attach a dataset to one jail and the children of the same dataset to another jail. You can also not attach the root file system of the jail or any dataset which needs to be mounted before the zfs rc script is run inside the jail, as it would be attached unmounted until it is mounted from the rc script inside the jail. To allow management of the dataset from within a jail, the jailed property has to be set and the jail needs access to the /dev/zfs device. The quota property cannot be changed from within a jail. See jail(8) for information on how to allow mounting ZFS datasets from within a jail. A Tn ZFS dataset can be detached from a jail using the Cm unjail subcommand. After a dataset is attached to a jail and the jailed property is set, a jailed file system cannot be mounted outside the jail, since the jail administrator might have set the mount point to an unacceptable value
BF_set_key(3), BF_encrypt(3), BF_decrypt(3), BF_ecb_encrypt(3), BF_cbc_encrypt(3), BF_cfb64_encrypt(3), BF_ofb64_encrypt(3), BF_options(3)
Blowfish encryption
ECDSA_SIG_get0(3), ECDSA_SIG_get0_r(3), ECDSA_SIG_get0_s(3), ECDSA_SIG_set0(3), ECDSA_SIG_new(3), ECDSA_SIG_free(3), ECDSA_size(3), ECDSA_sign(3), ECDSA_do_sign(3), ECDSA_verify(3), ECDSA_do_verify(3), ECDSA_sign_setup(3), ECDSA_sign_ex(3), ECDSA_do_sign_ex(3)
low-level elliptic curve digital signature algorithm (ECDSA) functions
EVP_bf_cbc(3), EVP_bf_cfb(3), EVP_bf_cfb64(3), EVP_bf_ecb(3), EVP_bf_ofb(3)
EVP Blowfish cipher
RSA_private_encrypt(3), RSA_public_decrypt(3)
low-level signature operations
SSL_CTX_set_max_cert_list(3), SSL_CTX_get_max_cert_list(3), SSL_set_max_cert_list(3), SSL_get_max_cert_list(3)
manipulate allowed size for the peer's certificate chain
reset SSL object to allow another connection
SSL_set_max_early_data(3), SSL_CTX_set_max_early_data(3), SSL_get_max_early_data(3), SSL_CTX_get_max_early_data(3), SSL_set_recv_max_early_data(3), SSL_CTX_set_recv_max_early_data(3), SSL_get_recv_max_early_data(3), SSL_CTX_get_recv_max_early_data(3), SSL_SESSION_get_max_early_data(3), SSL_SESSION_set_max_early_data(3), SSL_write_early_data(3), SSL_read_early_data(3), SSL_get_early_data_status(3), SSL_allow_early_data_cb_fn(3), SSL_CTX_set_allow_early_data_cb(3), SSL_set_allow_early_data_cb(3)
functions for sending and receiving early data
AES_set_encrypt_key(3), AES_set_decrypt_key(3), AES_encrypt(3), AES_decrypt(3), AES_cbc_encrypt(3)
low-level interface to the AES symmetric cipher
agar low-level driver interface
agar low-level event loop
low-level OpenGL context widget
Ast_iterator.iterator allows to implement AST inspection using open recursion
BF_set_key(3), BF_encrypt(3), BF_decrypt(3), BF_ecb_encrypt(3), BF_cbc_encrypt(3), BF_cfb64_encrypt(3), BF_ofb64_encrypt(3), BF_options(3)
Blowfish encryption
BF_set_key(3ossl), BF_encrypt(3ossl), BF_decrypt(3ossl), BF_ecb_encrypt(3ossl), BF_cbc_encrypt(3ossl), BF_cfb64_encrypt(3ossl), BF_ofb64_encrypt(3ossl), BF_options(3ossl)
Blowfish encryption
Set the maximum clique size allowed
Set the maximum i-node size allowed
Set the maximum number of iterations to be allowed by the iterative solver
Change the setup for triangular matrix multiplication to allow for multiple vectors
disallow specifying username in the url
follow HTTP 3xx redirects
time allowed to wait for FTP response
allowed GSS-API delegation
allow HTTP/0.9 response
low speed limit in bytes per second
low speed limit time period
allow RCPT TO command to fail for some recipients
max idle time allowed for reusing a connection
maximum file size allowed to download
maximum file size allowed to download
maximum number of redirects allowed
allowed protocols
protocols allowed to redirect to
maximum time the transfer is allowed to complete
maximum time the transfer is allowed to complete
ECDSA_SIG_get0(3), ECDSA_SIG_get0_r(3), ECDSA_SIG_get0_s(3), ECDSA_SIG_set0(3), ECDSA_SIG_new(3), ECDSA_SIG_free(3), ECDSA_size(3), ECDSA_sign(3), ECDSA_do_sign(3), ECDSA_verify(3), ECDSA_do_verify(3), ECDSA_sign_setup(3), ECDSA_sign_ex(3), ECDSA_do_sign_ex(3)
low-level elliptic curve digital signature algorithm (ECDSA) functions
ECDSA_SIG_get0(3ossl), ECDSA_SIG_get0_r(3ossl), ECDSA_SIG_get0_s(3ossl), ECDSA_SIG_set0(3ossl), ECDSA_SIG_new(3ossl), ECDSA_SIG_free(3ossl), ECDSA_size(3ossl), ECDSA_sign(3ossl), ECDSA_do_sign(3ossl), ECDSA_verify(3ossl), ECDSA_do_verify(3ossl), ECDSA_sign_setup(3ossl), ECDSA_sign_ex(3ossl), ECDSA_do_sign_ex(3ossl)
low-level elliptic curve digital signature algorithm (ECDSA) functions
The BLOBFISH EVP_CIPHER implementations
EVP_bf_cbc(3), EVP_bf_cfb(3), EVP_bf_cfb64(3), EVP_bf_ecb(3), EVP_bf_ofb(3)
EVP Blowfish cipher
EVP_bf_cbc(3ossl), EVP_bf_cfb(3ossl), EVP_bf_cfb64(3ossl), EVP_bf_ecb(3ossl), EVP_bf_ofb(3ossl)
EVP Blowfish cipher
check for lower case ASCII character
create a lower case translation of a string
convert upper case ASCII to lower case
The vector variant of MPIX_Neighbor_alltoall allows sending/receiving different numbers of elements to and from each neighbor
Like MPIX_Neighbor_alltoallv but it allows one to send and receive with different types to and from each neighbor
Generalized all-to-all communication allowing different datatypes, counts, and displacements for each partner
Partitions a communicator into subgroups which form lower-dimensional cartesian subgrids
Nonblocking generalized all-to-all communication allowing different datatypes, counts, and displacements for each partner
The vector variant of MPI_Neighbor_alltoall allows sending/receiving different numbers of elements to and from each neighbor
Like MPI_Neighbor_alltoallv but it allows one to send and receive with different types to and from each neighbor
Create a datatype with a new lower bound and extent from an existing datatype
Get the lower bound and extent for a Datatype
Get the lower bound and extent as MPI_Count values for a Datatype
Get the true lower bound and extent for a datatype
Get the true lower bound and extent as MPI_Count values for a datatype
Returns the lower-bound of a datatype
Create an MPI Window object for one-sided communication. This window allows memory to be dynamically exposed and un-exposed for RMA operations
OSSL_HTTP_REQ_CTX(3ossl), OSSL_HTTP_REQ_CTX_new(3ossl), OSSL_HTTP_REQ_CTX_free(3ossl), OSSL_HTTP_REQ_CTX_set_request_line(3ossl), OSSL_HTTP_REQ_CTX_add1_header(3ossl), OSSL_HTTP_REQ_CTX_set_expected(3ossl), OSSL_HTTP_REQ_CTX_set1_req(3ossl), OSSL_HTTP_REQ_CTX_nbio(3ossl), OSSL_HTTP_REQ_CTX_nbio_d2i(3ossl), OSSL_HTTP_REQ_CTX_exchange(3ossl), OSSL_HTTP_REQ_CTX_get0_mem_bio(3ossl), OSSL_HTTP_REQ_CTX_get_resp_len(3ossl), OSSL_HTTP_REQ_CTX_set_max_response_length(3ossl), OSSL_HTTP_is_alive(3ossl)
HTTP client low-level functions
Sets font to use for following output
AfterStep supports several different window placement policies. Some of them designed to fill free space, and some allowing for windows to be placed on top of others
RSA_private_encrypt(3), RSA_public_decrypt(3)
low-level signature operations
RSA_private_encrypt(3ossl), RSA_public_decrypt(3ossl)
low-level signature operations
This function allows you to set the state of processing certain events
SDLmm_todo(3), todo(3)
Todo List "Class SDLmm::SRect " 1c Extend the class with useful utility functions in regards to rectangles like intersections. "Class SDLmm::Surface " 1c Implement a better constructor scheme, where the first argument is a dummy class which specified what to do. This would allow a construct where a surface can be loaded from an image file without first having to create an unitialized object. "Class SDLmm::VideoInfo " 1c Build a status function allowing for easier access to the flags. This can be done using a bitfield which would allow for checking for multiple features at once
push SPI stack to allow recursive SPI usage
SSL_CTX_set_max_cert_list(3), SSL_CTX_get_max_cert_list(3), SSL_set_max_cert_list(3), SSL_get_max_cert_list(3)
manipulate allowed size for the peer's certificate chain
SSL_CTX_set_max_cert_list(3ossl), SSL_CTX_get_max_cert_list(3ossl), SSL_set_max_cert_list(3ossl), SSL_get_max_cert_list(3ossl)
manipulate allowed size for the peer's certificate chain
reset SSL object to allow another connection
reset SSL object to allow another connection
SSL_set_max_early_data(3), SSL_CTX_set_max_early_data(3), SSL_get_max_early_data(3), SSL_CTX_get_max_early_data(3), SSL_set_recv_max_early_data(3), SSL_CTX_set_recv_max_early_data(3), SSL_get_recv_max_early_data(3), SSL_CTX_get_recv_max_early_data(3), SSL_SESSION_get_max_early_data(3), SSL_SESSION_set_max_early_data(3), SSL_write_early_data(3), SSL_read_early_data(3), SSL_get_early_data_status(3), SSL_allow_early_data_cb_fn(3), SSL_CTX_set_allow_early_data_cb(3), SSL_set_allow_early_data_cb(3)
functions for sending and receiving early data
SSL_set_max_early_data(3ossl), SSL_CTX_set_max_early_data(3ossl), SSL_get_max_early_data(3ossl), SSL_CTX_get_max_early_data(3ossl), SSL_set_recv_max_early_data(3ossl), SSL_CTX_set_recv_max_early_data(3ossl), SSL_get_recv_max_early_data(3ossl), SSL_CTX_get_recv_max_early_data(3ossl), SSL_SESSION_get_max_early_data(3ossl), SSL_SESSION_set_max_early_data(3ossl), SSL_write_early_data(3ossl), SSL_read_early_data(3ossl), SSL_get_early_data_status(3ossl), SSL_allow_early_data_cb_fn(3ossl), SSL_CTX_set_allow_early_data_cb(3ossl), SSL_set_allow_early_data_cb(3ossl)
functions for sending and receiving early data
Overview on workflow of Sympa
Base class of subclasses to define Sympa workflows
Workflow to authorize messages bound for lists
Workflow to authorize requests in command messages
Workflow to dispatch requests
Workflow to distribute messages to list members
Workflow to handle command messages
Workflow to forward messages to administrators
Workflow to handle messages bound for lists
Workflow of archive storage
Workflow of request confirmation
Workflow of automatic list creation
Workflow of bounce processing
Workflow of digest sending
Workflow of message confirmation
Workflow of processing incoming messages
Workflow of command processing
Workflow of message moderation
Workflow of message distribution
Workflow of request processing
Workflow of task processing
Workflow of template sending
Workflow of resending messages in archive
Tcl_AllowExceptions.tcl85(3), Tcl_AllowExceptions(3)
allow all exceptions in next script evaluation
Tcl_AllowExceptions.tcl86(3), Tcl_AllowExceptions(3)
allow all exceptions in next script evaluation
Tcl_AllowExceptions.tcl87(3), Tcl_AllowExceptions(3)
allow all exceptions in next script evaluation
Tcl_SetRecursionLimit.tcl85(3), Tcl_SetRecursionLimit(3)
set maximum allowable nesting depth in interpreter
Tcl_SetRecursionLimit.tcl86(3), Tcl_SetRecursionLimit(3)
set maximum allowable nesting depth in interpreter
Tcl_SetRecursionLimit.tcl87(3), Tcl_SetRecursionLimit(3)
set maximum allowable nesting depth in interpreter
Tcl_UniCharIsAlnum.tcl85(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsWordChar(3)
routines for classification of Tcl_UniChar characters
Tcl_UniCharIsAlnum.tcl86(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsWordChar(3)
routines for classification of Tcl_UniChar characters
Tcl_UniCharIsAlnum.tcl87(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsUnicode(3), Tcl_UniCharIsWordChar(3)
routines for classification of Tcl_UniChar characters
Tcl_UniCharToLower.tcl85(3), Tcl_UniCharToUpper(3), Tcl_UniCharToLower(3), Tcl_UniCharToTitle(3), Tcl_UtfToUpper(3), Tcl_UtfToLower(3), Tcl_UtfToTitle(3)
routines for manipulating the case of Unicode characters and UTF-8 strings
Tcl_UniCharToLower.tcl86(3), Tcl_UniCharToUpper(3), Tcl_UniCharToLower(3), Tcl_UniCharToTitle(3), Tcl_UtfToUpper(3), Tcl_UtfToLower(3), Tcl_UtfToTitle(3)
routines for manipulating the case of Unicode characters and UTF-8 strings
Tcl_UniCharToLower.tcl87(3), Tcl_UniCharToUpper(3), Tcl_UniCharToLower(3), Tcl_UniCharToTitle(3), Tcl_UtfToUpper(3), Tcl_UtfToLower(3), Tcl_UtfToTitle(3)
routines for manipulating the case of Unicode characters and UTF-8 strings
defines a word in term of allowed characters, length etc
release queued events
release queued events
XIBarrierReleasePointer(3), XIBarrierReleasePointers(3)
allow pointer movement across a pointer barrier
XRaiseWindow(3), XLowerWindow(3), XCirculateSubwindows(3), XCirculateSubwindowsUp(3), XCirculateSubwindowsDown(3), XRestackWindows(3)
change window stacking order
Determine whether the X server allows Xkb access to particular capabilities of input devices other than the core X keyboard, or to determine the status of indicator maps, indicator names or button actions on a non-KeyClass extension device
Gets the SlowKeys acceptance delay for a keyboard device
Returns the high_XXX and low_XXX fields of act converted to a signed int
Returns the high_YYY and low_YYY fields of act converted to a signed int
Sets the high_XXX and low_XXX fields of act from the signed integer value x
Sets the high_YYY and low_YYY fields of act from the signed integer value y
A font list function that allows applications to access the fonts and character sets in a font list "XmFontListGetNextFont" "font list functions" "XmFontListGetNextFont"
A font list function that allows applications to access the entries in a font list "XmFontListInitFontContext" "font list functions" "XmFontListInitFontContext"
A function that allows writing of upward-compatible applications and widgets "XmResolveAllPartOffsets"
A function that allows writing of upward-compatible applications and widgets "XmResolvePartOffsets"
A VendorShell function that allows preactions and postactions to be executed when a protocol message is received from MWM "XmSetProtocolHooks" "VendorShell functions" "XmSetProtocolHooks" "protocols"
A VendorShell convenience interface that allows preactions and postactions to be executed when a protocol message is received from the window manager "XmSetWMProtocolHooks" "VendorShell functions" "XmSetWMProtocolHooks" "protocols"
A TextField function that accesses the value of the current maximum allowable length of a text string entered from the keyboard "XmTextFieldGetMaxLength" "TextField functions" "XmTextFieldGetMaxLength"
A TextField function that sets the value of the current maximum allowable length of a text string entered from the keyboard "XmTextFieldSetMaxLength" "TextField functions" "XmTextFieldSetMaxLength"
A Text function that accesses the value of the current maximum allowable length of a text string entered from the keyboard "XmTextGetMaxLength" "Text functions" "XmTextGetMaxLength"
A Text function that sets the value of the current maximum allowable length of a text string entered from the keyboard "XmTextSetMaxLength" "Text functions" "XmTextSetMaxLength"
XmtIconifyShell(3), XmtIconifyShell()(3), XmtDeiconifyShell()(3), XmtRaiseShell()(3), XmtLowerShell()(3)
perform window manager manipulations on shell widgets
XmtRegisterLayoutParser(3), XmtRegisterLayoutParser()(3), XmtRegisterLayoutCreateMethod()(3)
register the parser for the XmtLayout widget layout grammar and allow typed widget creation by the parser
XtAppError(3), XtAppSetErrorHandler(3), XtAppSetWarningHandler(3), XtAppWarning(3)
low-level error handlers
XtError(3), XtSetErrorHandler(3), XtSetWarningHandler(3), XtWarning(3)
low-level error handlers
Add the given driver to the end of list of recommended drivers
Add the given driver to the end of list of display recommended drivers
Add the given driver to the end of list of keyboard recommended drivers
Add the given driver to the end of list of mouse recommended drivers
activateCDKDScale(3), activateCDKDScale destroyCDKDScale drawCDKDScale eraseCDKDScale getCDKDScaleBox getCDKDScaleDigits getCDKDScaleHighValue getCDKDScaleLowValue getCDKDScaleValue injectCDKDScale moveCDKDScale newCDKDScale positionCDKDScale setCDKDScale setCDKDScaleBackgroundAttrib setCDKDScaleBackgroundColor setCDKDScaleBox setCDKDScaleBoxAttribute setCDKDScaleDigits setCDKDScaleHorizontalChar setCDKDScaleLLChar setCDKDScaleLRChar setCDKDScaleLowHigh setCDKDScalePostProcess setCDKDScalePreProcess setCDKDScaleULChar setCDKDScaleURChar setCDKDScaleValue setCDKDScaleVerticalChar cdk_dscale(3)
curses scale widget (type double)
activateCDKFScale(3), activateCDKFScale destroyCDKFScale drawCDKFScale eraseCDKFScale getCDKFScaleBox getCDKFScaleDigits getCDKFScaleHighValue getCDKFScaleLowValue getCDKFScaleValue injectCDKFScale moveCDKFScale newCDKFScale positionCDKFScale setCDKFScale setCDKFScaleBackgroundAttrib setCDKFScaleBackgroundColor setCDKFScaleBox setCDKFScaleBoxAttribute setCDKFScaleDigits setCDKFScaleHorizontalChar setCDKFScaleLLChar setCDKFScaleLRChar setCDKFScaleLowHigh setCDKFScalePostProcess setCDKFScalePreProcess setCDKFScaleULChar setCDKFScaleURChar setCDKFScaleValue setCDKFScaleVerticalChar cdk_fscale(3)
curses scale widget (type float)
activateCDKFSlider(3), activateCDKFSlider destroyCDKFSlider drawCDKFSlider eraseCDKFSlider getCDKFSliderBox getCDKFSliderDigits getCDKFSliderHighValue getCDKFSliderLowValue getCDKFSliderValue injectCDKFSlider moveCDKFSlider newCDKFSlider positionCDKFSlider setCDKFSlider setCDKFSliderBackgroundAttrib setCDKFSliderBackgroundColor setCDKFSliderBox setCDKFSliderBoxAttribute setCDKFSliderDigits setCDKFSliderHorizontalChar setCDKFSliderLLChar setCDKFSliderLRChar setCDKFSliderLowHigh setCDKFSliderPostProcess setCDKFSliderPreProcess setCDKFSliderULChar setCDKFSliderURChar setCDKFSliderValue setCDKFSliderVerticalChar cdk_fslider(3)
curses slider widget (type float)
activateCDKHistogram(3), activateCDKHistogram destroyCDKHistogram drawCDKHistogram eraseCDKHistogram getCDKHistogramBox getCDKHistogramFillerChar getCDKHistogramHighValue getCDKHistogramLowValue getCDKHistogramStatsAttr getCDKHistogramStatsPos getCDKHistogramValue getCDKHistogramViewType moveCDKHistogram newCDKHistogram positionCDKHistogram setCDKHistogram setCDKHistogramBackgroundAttrib setCDKHistogramBackgroundColor setCDKHistogramBox setCDKHistogramBoxAttribute setCDKHistogramDisplayType setCDKHistogramFillerChar setCDKHistogramHorizontalChar setCDKHistogramLLChar setCDKHistogramLRChar setCDKHistogramStatsAttr setCDKHistogramStatsPos setCDKHistogramULChar setCDKHistogramURChar setCDKHistogramValue setCDKHistogramVerticalChar setCDKHistogramViewType cdk_histogram(3)
curses histogram widget
activateCDKScale(3), activateCDKScale destroyCDKScale drawCDKScale eraseCDKScale getCDKScaleBox getCDKScaleHighValue getCDKScaleLowValue getCDKScaleValue injectCDKScale moveCDKScale newCDKScale positionCDKScale setCDKScale setCDKScaleBackgroundAttrib setCDKScaleBackgroundColor setCDKScaleBox setCDKScaleBoxAttribute setCDKScaleHorizontalChar setCDKScaleLLChar setCDKScaleLRChar setCDKScaleLowHigh setCDKScalePostProcess setCDKScalePreProcess setCDKScaleULChar setCDKScaleURChar setCDKScaleValue setCDKScaleVerticalChar cdk_scale(3)
curses scale widget (type int)
activateCDKSlider(3), activateCDKSlider destroyCDKSlider drawCDKSlider eraseCDKSlider getCDKSliderBox getCDKSliderHighValue getCDKSliderLowValue getCDKSliderValue injectCDKSlider moveCDKSlider newCDKSlider positionCDKSlider setCDKSlider setCDKSliderBackgroundAttrib setCDKSliderBackgroundColor setCDKSliderBox setCDKSliderBoxAttribute setCDKSliderHorizontalChar setCDKSliderLLChar setCDKSliderLRChar setCDKSliderLowHigh setCDKSliderPostProcess setCDKSliderPreProcess setCDKSliderULChar setCDKSliderURChar setCDKSliderValue setCDKSliderVerticalChar cdk_slider(3)
curses slider widget (type int)
activateCDKUScale(3), activateCDKUScale destroyCDKUScale drawCDKUScale eraseCDKUScale getCDKUScaleBox getCDKUScaleHighValue getCDKUScaleLowValue getCDKUScaleValue injectCDKUScale moveCDKUScale newCDKUScale positionCDKUScale setCDKUScale setCDKUScaleBackgroundAttrib setCDKUScaleBackgroundColor setCDKUScaleBox setCDKUScaleBoxAttribute setCDKUScaleHorizontalChar setCDKUScaleLLChar setCDKUScaleLRChar setCDKUScaleLowHigh setCDKUScalePostProcess setCDKUScalePreProcess setCDKUScaleULChar setCDKUScaleURChar setCDKUScaleValue setCDKUScaleVerticalChar cdk_uscale(3)
curses scale widget (type unsigned)
activateCDKUSlider(3), activateCDKUSlider destroyCDKUSlider drawCDKUSlider eraseCDKUSlider getCDKUSliderBox getCDKUSliderHighValue getCDKUSliderLowValue getCDKUSliderValue injectCDKUSlider moveCDKUSlider newCDKUSlider positionCDKUSlider setCDKUSlider setCDKUSliderBackgroundAttrib setCDKUSliderBackgroundColor setCDKUSliderBox setCDKUSliderBoxAttribute setCDKUSliderHorizontalChar setCDKUSliderLLChar setCDKUSliderLRChar setCDKUSliderLowHigh setCDKUSliderPostProcess setCDKUSliderPreProcess setCDKUSliderULChar setCDKUSliderURChar setCDKUSliderValue setCDKUSliderVerticalChar cdk_uslider(3)
curses slider widget (type unsigned)
add two integers, check for arithmetic overflow
Low-level function for searching files. Allegro game programming library
low-level data-extraction from Amanda volumes
allows user adjustment of Network Audio System device attributes aupanel#(1) "" "aupanel(1)"
blowfish file encryption
biolibc(3), BIOLIBC(3)
Library of high-performance low-level functions for bioinformatics programming
bn_mul_words(3), bn_mul_add_words(3), bn_sqr_words(3), bn_div_words(3), bn_add_words(3), bn_sub_words(3), bn_mul_comba4(3), bn_mul_comba8(3), bn_sqr_comba4(3), bn_sqr_comba8(3), bn_cmp_words(3), bn_mul_normal(3), bn_mul_low_normal(3), bn_mul_recursive(3), bn_mul_part_recursive(3), bn_mul_low_recursive(3), bn_mul_high(3), bn_sqr_normal(3), bn_sqr_recursive(3), bn_expand(3), bn_wexpand(3), bn_expand2(3), bn_fix_top(3), bn_check_top(3), bn_print(3), bn_dump(3), bn_set_max(3), bn_set_high(3), bn_set_low(3), mul(3), mul_add(3), sqr(3)
BIGNUM library internal functions
Stress Test for Couchbase Client and Cluster
cdk_screen(3), destroyCDKScreen endCDK eraseCDKScreen initCDKColor initCDKScreen lowerCDKObject raiseCDKObject refreshCDKScreen registerCDKObject unregisterCDKObject cdk_screen(3)
Cdk Screen and Widget Manipulation Functions
An application to emulate CEC followers
generate a C-language flowgraph
cgi_url_validate(3), cgi_url_validate (3)
validate that url is of an allowed format
waves of boxes
dequeue from bounded FIFO and allow for spurious failure
speed up or slow down the local clock, continuously
CMake Variables Reference This page documents variables that are provided by CMake or have meaning to CMake when set by project code. For general information on variables, see the Variables section in the cmake-language manual. NOTE: 0.0 3.5 CMake reserves identifiers that: 0.0 (bu 2 begin with CMAKE_ (upper-, lower-, or mixed-case), or (bu 2 begin with _CMAKE_ (upper-, lower-, or mixed-case), or (bu 2 begin with _ followed by the name of any CMake Command
simulates coral growth, albeit somewhat slowly
DjVuDocument encoder for low-color images
a digital photography workflow application
low level TDB/CTDB manipulation tool using the dbwrap interface
def_prog_mode(3x), def_shell_mode(3x), reset_prog_mode(3x), reset_shell_mode(3x), resetty(3x), savetty(3x), getsyx(3x), setsyx(3x), ripoffline(3x), curs_set(3x), napms(3x)
low-level curses routines
The palette used by the Atari ST low resolution desktop. Allegro game programming library
dictzip(1), dictunzip(1)
compress (or expand) files, allowing random access
Postfix DNS allow/denylist logger
convert a string to lower case man1/alc_origin.1
an auto-magic tool which allows you to communicate via an WEP-encrypted AP without knowing the key
Extreme Happy Netflow Tool. Client part
Extreme Happy Netflow Tool. Server part
a flow of particles which form an energy stream
two dimensional incompressible inviscid fluid flow
expect_kibitz(1), kibitz(1)
allow two people to interact with one shell
expect_xkibitz(1), xkibitz(1)
allow multiple people to interact in an xterm
expire(8cn), doexpire(8cn), expireiflow(8cn)
expire old news upact - update news active file
explain tcflow(3) errors require_index { }
terminal flow control and report errors require_index { "terminal flow control and report errors" }
eyeclock(1), EyeClock(1)
A clock application for X. The eyes follow the mouse pointer
draws a waving ribbon following a sinusoidal path
monitor low-level server actions
Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
appends a credential ID to the list of credentials allowed in an assertion
convert all letters in an estring to lower case
Safe function to add fixed point numbers clamping overflow. Allegro game programming library
Safe function to subtract fixed point numbers clamping underflow. Allegro game programming library
show subroutine dependence of Fortran77 programs
strange attractors
Manage storage of flow file archives by expiring old data
Concatenate flow files
Detect scanning and other suspicious network activity
Manage storage of flow file archives by expiring old data
Export flow-tools files into other NetFlow packages
Fanout (replicate) flow exports to many destinations
Filter flows
Generate test flows
Display meta information in flow file
Import flows into flow-tools from other NetFlow packages
Process the STAT: lines from flow-capture and flow-fanout to RRD files
Apply tags to flow files
Merge flow files
Filter flows
Display flows in formatted ASCII
Receive flow data with the NetFlow protocol
Generate reports from flow data
Convert flow-report CSV output to RRDtool format
Format the output of flow-report in ASCII or HTML
Transmit flow data with the NetFlow protocol
Split flow files into smaller files
Generate reports with flow data
Apply tags to flow files
Tool set for working with NetFlow data
Example usage of flow-tools
Apply translations to selected fields of a flow
A security assessment tool for the IPv6 Flow Label field
Capture network flow data and write it to temporary files
NetFlow collector daemon
Read, filter and concatenate binary flowd logfiles
NetFlow Collector daemon configuration file
advanced TCP traffic generator for Linux, FreeBSD, and Mac OS X
helper tool for the advanced TCP traffic generator flowgrind
advanced TCP traffic generator for Linux, FreeBSD, and Mac OS X
SiLK plug-in providing YAF flow key filter and field
SiLK plug-in providing payload and rate filters and fields
a NetFlow probe
--- an FTP gateway script to allow tunnelling
falling snowflakes/flower shapes
YAF Flow Key Calculator
getdns_context_set_context_update_callback, getdns_context_set_dns_root_servers, getdns_context_set_dns_transport, getdns_context_set_dnssec_trust_anchors, getdns_context_set_dnssec_allowed_skew, getdns_context_set_follow_redirects, getdns_context_set_limit_outstanding_queries, getdns_context_set_namespaces, getdns_context_set_resolution_type, getdns_context_set_suffix, getdns_context_set_timeout, -- getdns context manipulation routines n
View details about workflow runs
Download artifacts generated by a workflow run
List recent workflow runs
View a summary of a workflow run
View details about GitHub Actions workflows
Disable a workflow
Enable a workflow
List workflows
Run a workflow by creating a workflow_dispatch event
View the summary of a workflow
An overview of recommended workflows with Git
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
allow the user to compose an input line
Allows extracting frames corresponding to clusters from trajectory rst2man-indent-level 0 1 rstReportMargin \$1
gnc-fq-helper(1), gnc-fq-helper (1)
allows gnucash to communicate with Finance::Quote over pipes from guile. The requests and responses are scheme forms
API function
Heidelberger table macros for GNU roff nr groff_hdtbl_C n[.C] Some simple formatting macros. Note that we use '.ig' here and not a comment to make 'mandb' 2.4.1 (and probably more recent versions also) happy; otherwise the '.char' lines and the stuff which follows is included in the 'whatis' database. . [lB] F[n[.fam]][ [rB] F[n[.fam]]] [or] F[n[.fam]]||| [ell] F[n[.fam]].|.|. [oq] F[n[.fam]][oq] [cq] F[n[.fam]][cq] F CR {
Tells if the input focus follows the mouse pointer. Allegro game programming library
flow colors through a ranked digraph
hlmaster.filter(1), "hlmaster.filter" "(1)
How to allow/block specific gameservers."
allows you to run simultaneously many virtual router instances, and to simulate ATM, Ethernet or Frame(hyRelay networks
provides a Free Software web browser plugin running applets written in the Java programming language and an implementation of Java Web Start, originally based on the NetX project. NetX allows Java applets and applications to be downloaded over the network, cached, and (by default) run in a secure sandbox environment. Subsequent runs of the applet download the latest version automatically. Update and security settings, among others, can be set using the itw-settings command. icedtea-web also includes a plugin to enable Java applets ( within web browsers. Names and email addresses of contributors to this project can be found in the file AUTHORS in the IcedTea-Web root directory. The full GPLv2 license of this project can be found in the file COPYING in the IcedTea-Web root directory. News about releases of this project can be found in the file NEWS in the IcedTea-Web root directory
allow to run java applets in your favorite browser
Low level initialisation of a dialog. Allegro game programming library
Low level initialisation of a menu. Allegro game programming library
Visualize the momentary and aggregate intersections between slowly moving circles
Visualize the momentary and aggregate intersections between slowly moving circles
iwidgets_extbutton(n), iwidgets::extbutton(n)
Extends the behavior of the Tk button by allowing a bitmap or image to coexist with text
User specified low level keyboard event handler. Allegro game programming library
displays a user's list of IDs the way 'id' does. The following is displayed : uid=uidNumber(uid) gid=gidNumber(cn) groups=gidNumber(cn)[,gidNumber(cn)...]
ldns_pkt2buffer_str(3), ldns_pktheader2buffer_str(3), ldns_rr2buffer_str(3), ldns_rr_list2buffer_str(3), ldns_rdf2buffer_str(3), ldns_key2buffer_str(3), ldns_pkt2buffer_wire(3), ldns_rr2buffer_wire(3), ldns_rdf2buffer_wire(3), ldns_rrsig2buffer_wire(3), ldns_rr_rdata2buffer_wire(3)
lower level conversions
ldns_rdf2buffer_str_a(3), ldns_rdf2buffer_str_aaaa(3), ldns_rdf2buffer_str_str(3), ldns_rdf2buffer_str_b64(3), ldns_rdf2buffer_str_hex(3), ldns_rdf2buffer_str_type(3), ldns_rdf2buffer_str_class(3), ldns_rdf2buffer_str_alg(3), ldns_rdf2buffer_str_loc(3), ldns_rdf2buffer_str_unknown(3), ldns_rdf2buffer_str_nsap(3), ldns_rdf2buffer_str_wks(3), ldns_rdf2buffer_str_nsec(3), ldns_rdf2buffer_str_period(3), ldns_rdf2buffer_str_tsigtime(3), ldns_rdf2buffer_str_apl(3), ldns_rdf2buffer_str_int16_data(3), ldns_rdf2buffer_str_int16(3), ldns_rdf2buffer_str_ipseckey(3)
lower level to string conversion functions
libowfat_buffer_feed(3), buffer_feed(3)
low-level component of buffer_get
libowfat_case_lowerb(3), case_lowerb(3)
compare strings case-insensitively
libowfat_case_lowers(3), case_lowers(3)
compare strings case-insensitively
libowfat_imult16(3), imult16(3)
integer multiplication with overflow checking
libowfat_imult32(3), imult32(3)
integer multiplication with overflow checking
libowfat_imult64(3), imult64(3)
integer multiplication with overflow checking
libowfat_umult16(3), umult16(3)
integer multiplication with overflow checking
libowfat_umult32(3), umult32(3)
integer multiplication with overflow checking
libowfat_umult64(3), umult64(3)
integer multiplication with overflow checking
Command for injecting a gossip message (low-level)
Low-level invoice creation
Low-level command to create a custom onion
Command for decoding an invoice string (low-level)
Command for decoding a bolt11 string (low-level)
Command for routing a payment (low-level)
Low-level command for querying sendpay status
Low-level interface to send protocol messages to peers
low-level command to send an onion message
Low-level command for sending a payment via a route
lower.tk85(n), lower(n)
Change a window's position in the stacking order
lower.tk86(n), lower(n)
Change a window's position in the stacking order
a simple session editor GUI for LXDE which follows autostart specs from FreeDesktop.Org
reflow format=flowed plain text messages
add an MSDOS filesystem to a low-level formatted floppy disk '" t TQ \$1 . (is' (if` (pd"
midi_msg_callback(3), midi_meta_callback(3), midi_sysex_callback(3)
Hook functions allowing you to intercept MIDI player events. Allegro game programming library
The Massively Parallel Quantum Chemistry program (MPQC) computes the properties of molecules from first principles. This documentation is divided into the following chapters: "o" 2 MPQC Overview "o" 2 Running MPQC "o" 2 MPQC Input "o" 2 Validating MPQC "o" 2 Running Psi 3 from MPQC "o" 2 CCA Components "o" 2 MPQC License "o" 2 MPQC Warranty
Lowercase an M-text
a low-latency, high quality voice chat program
Summarize slow query log files
Parse, filter, analyze and sort MySQL slow, general and binary logs
follow a pathname until a terminal point is found
Generate low-effort posts for r/unixporn
ne_request_create(3), ne_request_dispatch(3), ne_request_destroy(3)
low-level HTTP request handling
netflow anonymisation
netflow capture daemon
netflow display and analyze program
netflow profiler
netflow replay program
slow down a program when the load average is above a certain limit
tool to allow external access to Winbinds NTLM authentication function
oid_is_null(3), OID_IS_NULL()(3), OID_EQUALS()(3), pmemobj_direct()(3), pmemobj_oid()(3), pmemobj_type_num()(3), pmemobj_pool_by_oid()(3), pmemobj_pool_by_ptr()(3)
functions that allow mapping operations between object addresses, object handles, oids or type numbers
oo_abstract.tcl87(n), oo::abstract(n)
a class that does not allow direct instances of itself
oo_singleton.tcl87(n), oo::singleton(n)
a class that does only allows one instance of itself
opam-installer(1), opamN'45'installer(1)
N'45' Handles (un)installation of package files following instructions from opam *N'46'install filesN'46'
OpenFlow actions and instructions with Open vSwitch extensions
Top like behavior for ovs-dpctl dump-flows
protocol header fields in OpenFlow and Open vSwitch
administer OpenFlow switches
simple OpenFlow controller for testing
specify the direction that the text flows within the document
A pass(1) extension that provides an easy flow for updating passwords
shift a PBM-P4-file to the right lower corner
Low level evaluation tool for writing router config generators
pmemobj_memcpy_persist(3), pmemobj_persist()(3), pmemobj_xpersist()(3), pmemobj_flush()(3), pmemobj_xflush()(3), pmemobj_drain()(3), pmemobj_memcpy()(3), pmemobj_memmove()(3), pmemobj_memset()(3), pmemobj_memcpy_persist()(3), pmemobj_memset_persist()(3)
low-level memory manipulation functions
Version of quat_interpolate() allowing control over the rotation. Allegro game programming library
racluster(5), racluster.conf(5)
racluster flow model definitions
inserts fixed form or free form metadata labels into argus(8). ralabel supports a number of strategies for labeling including 1) address based, providing free form metadata, country code, geo data and fully qualified domain name (FQDN) labeling; 2)port based, providing free form labels using IANA port definitions, and 3) flow filter, providing free form labels based on argus filter specicfications
recursively lowercase all filenames
Server for binding low TCP ports from non-root programs
dodge and blow up rocks with your spaceship
Allows hierarchical browsing of Verilog HDL source code and library design files
A script to allow applications to use internationalized domain names
Build a binary Aggregate Bag from SiLK Flow records
Create a binary aggregate bag from non-flow data
Append SiLK Flow file(s) to an existing SiLK Flow file
Build a binary Bag from SiLK Flow records
Create a binary Bag from non-flow data
Concatenate SiLK Flow files into single stream
Combine flows denoting a long-lived session into a single flow
Compare the records in two SiLK Flow files
Print selected fields of binary SiLK Flow records
Eliminate duplicate SiLK Flow records
Choose which SiLK Flow records to process
Append incremental SiLK Flow files to hourly files
Collect flow data and store it in binary SiLK Flow files
invoke rwfilter to find flows matching Snort signatures
Convert IPFIX records to SiLK Flow records
Zero out lower bits of IP addresses in SiLK Flow records
Convert PCAP data to SiLK Flow Records with YAF
Convert NetFlow v5 records to SiLK Flow records
Filter a tcpdump file using a SiLK Flow file
Generate SiLK Flow records from packet data
Randomize the IP addresses in a SiLK Flow file
Generate random SiLK Flow records
Convert SiLK Flow records to IPFIX records
Sort SiLK Flow records on one or more fields
Change the byte order of a SiLK Flow file
Text Utility Converter - rwcut output to SiLK flows
Bin SiLK Flow records by a key and print each bin's volume
sc_AssignedKeyVal(3), sc::AssignedKeyVal(3)
This class allows keyval associations to be set up by the program, rather than determined by an external file
sc_EFCOpt(3), sc::EFCOpt(3)
The EFCOpt class implements eigenvector following as described by Baker in J
sc_KeyVal(3), sc::KeyVal(3)
The KeyVal class is designed to simplify the process of allowing a user to specify keyword/value associations to a C++ program
sc_MaxIterExceeded(3), sc::MaxIterExceeded(3)
This is thrown when an iterative algorithm attempts to use more iterations than allowed
sc_ShmMessageGrp(3), sc::ShmMessageGrp(3)
The ShmMessageGrp class is an implementation of MessageGrp that allows multiple process to be started that communicate with shared memory
sc_scprintf(3), sc::scprintf(3)
This class allows printf like output to put sent to an ostream
Sensor Configuration file for rwflowpack and flowcap
API function
Low level function to display the operating system cursor. Allegro game programming library
a FastCGI to CGI wrapper server
Denial Of Service attacks simulator
filter that allows one to interactively select a word from stdin and outputs the selection to stdout
SIP Messages flow viewer
Remote control program for softflowd
Traffic flow monitoring
subtract two integers, check for arithmetic overflow
suck(1), blow(1)
transfer data over a TCP connection
a low level graphics library for linux
system_context_size(3), system_context_size (3)
Change the number of vids allowed at once in new contexts
hex dumper with tail-following support
TCP flow recorder
slow down TCP connections on a LAN
parallel "pipe", allows asynchronous io
tk_focusFollowsMouse.tk85(n), tk_focusNext(n), tk_focusPrev(n), tk_focusFollowsMouse(n)
Utility procedures for managing the input focus
tk_focusFollowsMouse.tk86(n), tk_focusNext(n), tk_focusPrev(n), tk_focusFollowsMouse(n)
Utility procedures for managing the input focus
tpm2_policyauthorize(1), tpm2_policyauthorize(1)(1)
Allows for mutable policies by tethering to a signing authority
tpm2_policyauthorizenv(1), tpm2_policyauthorizenv(1)(1)
Allows for mutable policies by referencing to a policy from an NV index
change whether the TPM allows tpm_takeownership operations
show top flows
Shell wrapper to simplify the use of the tsocks(8) library to transparently allow an application to use a SOCKS proxy
Part of the Tcl threading extension allowing script level manipulation of data shared between threads
Low level helper function for testing Unicode text data. Allegro game programming library
Low level helper function for reading Unicode text data. Allegro game programming library
ugetx(3), ugetxc(3)
Low level helper function for reading Unicode text data. Allegro game programming library
Low level helper function for testing Unicode text data. Allegro game programming library
unicode uppercase, lowercase, and titlecase conversion
unicode::tolower(3), unicode::toupper(3)
unicode version of tolower(3) and toupper(3)
unicode_category_lookup(3), unicode_isalnum(3), unicode_isalpha(3), unicode_isblank(3), unicode_isdigit(3), unicode_isgraph(3), unicode_islower(3), unicode_ispunct(3), unicode_isspace(3), unicode_isupper(3)
unicode character categorization
unicode_line_break(3), unicode_lb_init(3), unicode_lb_set_opts(3), unicode_lb_next(3), unicode_lb_next_cnt(3), unicode_lb_end(3), unicode_lbc_init(3), unicode_lbc_set_opts(3), unicode_lbc_next(3), unicode_lbc_next_cnt(3), unicode_lbc_end(3)
calculate mandatory or allowed line breaks
unicode_uc(3), unicode_lc(3), unicode_tc(3), unicode_convert_tocase(3)
unicode uppercase, lowercase, and titlecase character lookup
Low level function to update a dialog player. Allegro game programming library
Low level function to update a menu player. Allegro game programming library
Low level helper function for writing Unicode text data. Allegro game programming library
Replaces all letters with lower case. Allegro game programming library
Converts a letter to lower case. Allegro game programming library
Low level helper function for testing Unicode text data. Allegro game programming library
Allow multiple Avid clients to share a network drive
samba vfs module to log slow VFS operations
Allow multiple Avid clients to share a network drive
disallows writes for older file
webcrawl(1), WebCrawl(1)
download web sites, following links
wnutil(3), wninit(3)
re_wninit, cntwords, strtolower, ToLowerCase, strsubst, getptrtype, getpos, getsstype, StrToPos, GetSynsetForSense, GetDataOffset, GetPolyCount, WNSnsToStr, GetValidIndexPointer, GetWNSense, GetSenseIndex, default_display_message
allow VNC connections to real X11 displays version: 0.9.16, lastmod: 2019-01-05
low level access to a Recoll Xapian index
release queued events
a follow the mouse X demo
graphical GTK+ MPD client focusing on low footprint
identify mines in a mine field without getting blown up
xo_open_marker(3), xo_open_marker_h(3), xo_close_marker(3), xo_close_marker_h(3)
prevent and allow closing of open constructs
Yet Another Flowmeter
YAF Flow Printer
delegate ZFS administration permissions to unprivileged users
built-in 0MQ proxy with control flow
Allow multiple, concurrent alarms
Allow multiple, queued alarms
Changes numeric chromosome components following the gaussian distribution
a low-level perlish interface for working with Amazon's SimpleDB service
Low level TCP/TLS connection
A subclass of Array::Iterator to allow forwards and backwards iteration
A subclass of Array::Iterator to allow circular iteration
A subclass of Array::Iterator to allow reuse of iterators
Tie-able array that allows only unique values
allow C/XS libraries to interrupt perl asynchronously
Async::MergePoint(3), "Async::MergePoint"(3)
resynchronise diverged control flow
passphrases using the Blowfish-based Unix crypt()
passphrases using Eggdrop's blowfish.mod
Allows Autodia to parse HTML::Mason files
This interface allows for generic building of sequences in factories which create sequences (like SeqIO)
fast, low-level functions for parsing and formatting GFF3
a fast, low-level gff3 parser
compatibility layer to support Bio::GFF3::LowLevel::Parser 1.0 API
insert sync (###) directives into an existing GFF3 file. WARNING: this module does not really work in the general case, read the DESCRIPTION section below
Keep track of where to find ontologies. Allows lookups by name
Base class for phylogenetic web services
Base class for phylogenetic web service clients
Represents a PhyloWS web resource
Represents a PhyloWS resource description
Base class for phylogenetic web services
PhyloWS service wrapper for Timetree
PhyloWS service wrapper for Tree of Life
PhyloWS service wrapper for uBio ClassificationBank records
PhyloWS service wrapper for uBio NameBank records
Wrapper for Sim4 program that allows for alignment of cdna to genomic sequences
Object for identifying low complexity regions in a given protein seequence
Descendant of Bio::SeqI that allows updates
key-value dictionary implementation, using a SQLite database for storage (lighter/slower version of Brackup::Dict::SQLite)
Allow CGI::Application to use Apache::* modules without interference
Lowercase Filter
An extensible CGI parameter validation module (allowing commonly used checks on parameters to be called more concisely and consistently)
In memory implementation n .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" Subsection "$cb->__memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" This method retrieves a storabled tree identified by $name. It takes the following arguments: "name" 4 Item "name" The internal name for the source file to retrieve. "uptodate" 4 Item "uptodate" A flag indicating whether the file-cache is up-to-date or not. "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns a tree on success, false on failure. n .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" Subsection "$cb->__memory_save_source([verbose => BOOL, path => $path])" This method saves all the parsed trees in storabled format if Storable is available. It takes the following arguments: "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns true on success, false on failure
CPS(3), "CPS"(3)
manage flow of control in Continuation-Passing Style
Allows you to set up the environment from Catalyst's config file
allows a User to login via OpenID
Cflow(3), Cflow::find(3)
find "interesting" flows in raw IP flow files
Series data with additional attributes for High-Low charts
Class::Fields::Fuxor(3), Class::Fields::Fuxor(3)
Low level manipuation of object data members
Allow other classes and objects to respond to events in yours
Light weight workflow system
The context in which a transition is being applied (optional)
Common recipes with Class::Workflow
An instance in a workflow, with state and history
A Workflow instance objects to work with the other ::Simple classes
An instance's position in the workflow
Add hooks that are fired when the state accepts an instance
Automatically apply a transition upon arriving into a state
A useful class (or base class) for writing states
Implement transition metadata with a hash
A state that implements transition meta data using Set::Object
A function over an instance
A transition which knows which state it leads to
A useful class (or base class) for writing transitions
Verify that the transition is in the instance's current state before applying
Provide a hook for validating a transition (conditionals, input validators, etc)
Easier validation code
calculate deltas between workflow instances
Load workflow definitions from YAML files
Low-Level Interface to bzip2 compression library
Low-Level Interface to lzma compression library
Low-Level Interface to zlib compression library
direct addressing engine
Convert::Color::CMY(3), "Convert::Color::CMY"(3)
a color value represented as cyan/magenta/yellow
Convert::Color::CMYK(3), "Convert::Color::CMYK"(3)
a color value represented as cyan/magenta/yellow/key
a (slow but coro-aware) replacement for CORE::select
Perl Blowfish encryption module
Blowfish encryption algorithm implemented purely in Perl
Symmetric cipher Blowfish, key size: 64-448 bits
the Eksblowfish block cipher
Blowfish-based Unix crypt() password hash
Blowfish block cipher via Eksblowfish engine
Eksblowfish cipher family
Blowfish/Eksblowfish with access to subkeys
Blowfish cipher with unrestricted key length
Eksblowfish bcrypt backend
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3)
Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
Allows you to create a global password file for DB passwords
mediate low-level interaction with storage mechanism
a low level async client for Tarantool <>
Perl extension for simple-minded recipe-controlled build of data
Parsing Netflow PDU binary structures
A collection of low-level debug facilities
Allow complex data structures to be encoded using flat URIs
Convert text to lowercase
Convert first character of text to lowercase
Allows extra arguments
Locale data examples for the Lower Sorbian (dsb) locale
Locale data examples for the Lower Sorbian Germany (dsb-DE) locale
Locale data examples for the Low German (nds) locale
Locale data examples for the Low German Germany (nds-DE) locale
Locale data examples for the Low German Netherlands (nds-NL) locale
tell me why my perl program runs so slowly
determine whether strict (but slow) tests should be enabled
shims to allow Type::Tiny to run on Perl 5.6.x
shims to allow Type::Tiny to run on Perl 5.8.x
allow a DtTerm widget to clean up after subprocess termination
Email::Valid which allows dot before at mark
High speed Base58 encoding using GMP with BigInt and MD5 support For version 1.0 upgrades, please read the INCOMPATIBLE CHANGES section below
High level API for event-based execution flow control
Callbacks attached to jobs
Abstract base class for custom frontends
Abstract base class for all job classes
Execute a closure
External command for async execution
Build a group of jobs
Abstract class for parallel scheduling
Limit number of parallel executed jobs
A module that allows you to declare real exception classes in Perl
File locking with fcntl(2) This text also documents the following sub-packages: "File::FcntlLock::XS" 2 Item "File::FcntlLock::XS" "File::FcntlLock::Pure" 2 Item "File::FcntlLock::Pure" "File::FcntlLock::Inline" 2 Item "File::FcntlLock::Inline"
Extend File Glob to Allow Input and Output Files
Flowd(3), Flowd::Serialiser(3)
Perl extension for blah blah blah
Low level interface to Furl
GD::Graph type that shows open, high, low and close as "candlesticks"
GD::Graph type that shows open, high, low and close as ticks on little sticks
Gantry::Docs::DBConn(3), Header "Name" Gantry::Docs::DBConn(3)
how database connection info flows through Gantry
Display a Event::ExecFlow job plan
Gungho FAQ n .SH "Q. ""Why Did You Call It Gungho""?" .SH "Q. ``Why Did You Call It Gungho''?" Header "Q. Why Did You Call It Gungho?" It rhymes with Xango, which is its predecessor. n .SH "Q. ""I don't understand the notation of the config""" .SH "Q. ``I don't understand the notation of the config''" Header "Q. I don't understand the notation of the config" To make the notation concise, we use a notation like engine.module = POE. Each level is a key in the hash, so the previous example translates to a config like my $config = { engine => { module => "POE" } } Or, in YAML: engine: module: POE n .SH "Q. ""My requests are being served slow. What can I do?""" .SH "Q. ``My requests are being served slow. What can I do?''" Header "Q. My requests are being served slow. What can I do?" There are actually a number of things that may affect fetch speed
Automatically Follow Links Within Responses
GunghoX::FollowLinks::Filter(3), Gunghox::FollowLinks::Filter(3)
Filter URI
Base Class For FollowLinks Parser
FollowLinks Parser For HTML Documents
Parse URLs Out Of Plain Text
Rule To Decide If A Link Should Be Followed
Always Allow
Always Deny
Only Follow Fresh Links
Store URLs In A Cache Of Your Choice
Store URLs In Memory
Follow Only On Selected Tags
Follow Based On MIME Type
Follow Dependig On URI
routines common to all HTML::Display subclasses n .SS "_|_PACKAGE_|_->new %ARGS" .SS "_|_PACKAGE_|_->new %ARGS" Subsection "__PACKAGE__->new %ARGS" Creates a new object as a blessed hash. The passed arguments are stored within the hash. If you need to do other things in your constructor, remember to call this constructor as well : package HTML::Display::WhizBang; use parent HTML::Display::Common; sub new { my ($class) = shift; my %args = @_; my $self = $class->SUPER::new(%args); # do stuff $self; }; n .SS "$display->display %ARGS" .SS "$display->display %ARGS" Subsection "$display->display %ARGS" This is the routine used to display the HTML to the user. It takes the following parameters : html => SCALAR containing the HTML file => SCALAR containing the filename of the file to be displayed base => optional base url for the HTML, so that relative links still work location (synonymous to base) Basic usage : Subsection "Basic usage :" my $html = "<html><body><h1>Hello world!</h1></body></html>"; my $browser = HTML::Display->new(); $browser->display( html => $html ); Location parameter : Subsection "Location parameter :" If you fetch a page from a remote site but still want to display it to the user, the location parameter comes in very handy : my $html = <html><body><img src="/images/hp0.gif"></body></html>; my $browser = HTML::Display->new(); # This will display part of the Google logo $browser->display( html => $html, base => );
filter transforming to lower case
allow setting options from options keys
this library provides reasonably low level access to the HTTP protocol, for perl. This does not replace LWP (what possibly could :-) but is a cut for speed. It also supports all of HTTP 1.0, so you have GET, POST, PUT, HEAD, and DELETE. Some support of HTTP 1.1 is available - sepcifically Transfer-Encoding = chunked and the Keep-Alive extensions. Additionally - rudimentary SSL support can be compiled in. This effectively enables negotiation of TLS, but does not validate the certificates
405 Method Not Allowed
hash with enforced lower cased keys
hash with enforced lower cased keys
native hash with enforced lower cased keys
Fast & minimal low-level HTTP client
Allows for error checking on a command involving multiple pipes
Low-level allocate a pseudo-Tty, import constants
cached lookup of country codes by domain name and IP address
Read iTunes Cover Flow meta information
Imager::Font::FreeType2(3), Imager::Font::FreeType2(3)
low-level functions for FreeType2 text output
Imager::Font::T1(3), Imager::Font::Type1(3)
low-level functions for Type1 fonts
Imager::Font::Truetype(3), Imager::Font::Truetype(3)
low-level functions for Truetype fonts
Imager::Font::Type1(3), Imager::Font::Type1(3)
low-level functions for T1Lib text output
Imager::Graph::Horizontal(3), Imager::Graph::Horizontal(3)
A super class for line/bar charts n .IP "add_data_series(e@data, $series_name)" 4 .IP "add_data_series(e@data, $series_name)" 4 Item "add_data_series(@data, $series_name)" Add a data series to the graph, of the default type. n .IP "add_bar_data_series(e@data, $series_name)" 4 .IP "add_bar_data_series(e@data, $series_name)" 4 Item "add_bar_data_series(@data, $series_name)" Add a bar data series to the graph. n .IP "add_line_data_series(e@data, $series_name)" 4 .IP "add_line_data_series(e@data, $series_name)" 4 Item "add_line_data_series(@data, $series_name)" Add a line data series to the graph. "set_column_padding($int)" 4 Item "set_column_padding($int)" Sets the number of pixels that should go between columns of data. "set_negative_background($color)" 4 Item "set_negative_background($color)" Sets the background color or fill used below the y axis. "draw()" 4 Item "draw()" Draw the graph "show_vertical_gridlines()" 4 Item "show_vertical_gridlines()" Shows vertical gridlines at the y-tics. Feature: vertical_gridlines "set_vertical_gridline_style(color => ..., style => ...)" 4 Item "set_vertical_gridline_style(color => ..., style => ...)" Set the color and style of the lines drawn for gridlines. Style equivalent: vgrid "show_line_markers()" 4 Item "show_line_markers()" "show_line_markers($value)" 4 Item "show_line_markers($value)" Feature: linemarkers. If $value is missing or true, draw markers on a line data series. Note: line markers are drawn by default. "use_automatic_axis()" 4 Item "use_automatic_axis()" Automatically scale the Y axis, based on Chart::Math::Axis. If Chart::Math::Axis isn't installed, this sets an error and returns undef. Returns 1 if it is installed. "set_x_tics($count)" 4 Item "set_x_tics($count)" Set the number of X tics to use. Their value and position will be determined by the data range
Manages and allow reflection on the Jifty::Actions that make up a Jifty application's API
Allows for basic continuation-based programming
convert input to lower case
Extension for LWP to allow parallel HTTP and FTP access
LaTeXML::Common::Color::cmy(3), "LaTeXML::Common::Color::cmy"(3)
represents colors in the cmy color model: cyan, magenta and yellow [0..1]; extends LaTeXML::Common::Color
LaTeXML::Common::Color::cmyk(3), "LaTeXML::Common::Color::cmyk"(3)
represents colors in the cmyk color model: cyan, magenta, yellow and black in [0..1]; extends LaTeXML::Common::Color
Directional layout manager
Correctly case a person's name from UPERCASE or lowcase
low-overhead IO::File
Intentionally slow test appender
lower a tool's window(s) to the back
Shortcut for importing all of List::Objects::WithUtils
Parallel flow model for building creative applications
low-calorie MIME generator
MPI_Cart_sub(3), MPI_Cart_sub (3)
Partitions a communicator into subgroups, which form lower-dimensional Cartesian subgrids
MPI_Status_set_elements(3), MPI_Status_set_elements_x(3)
Modifies opaque part of status to allow MPI_Get_elements to return count
Returns a new data type with new extent and upper and lower bounds
Returns the extent of a data type, the difference between the upper and lower bounds of the data type -- use of this routine is deprecated
MPI_Type_get_extent(3), MPI_Type_get_extent_x(3)
Returns the lower bound and extent of a data type
MPI_Type_get_true_extent(3), MPI_Type_get_true_extent_x(3)
Returns the true lower bound and extent of a data type's corresponding typemap, ignoring MPI_UB and MPI_LB markers
Returns the lower bound of a data type -- use of this routine is deprecated
work with Mac plists at a low level
tags for SpamAssassin rules The plugin allows rules to contain regular expression tags to be used in regular expression rules. The tags make it much easier to maintain complicated rules. Warning: This plugin relies on data structures specific to this version of SpamAssassin; it is not guaranteed to work with other versions of SpamAssassin
Allow $. as substitution for $self-> and in attribute names
catch overflows when using Math::Int128
catch overflows when using Math::Int64
Maypole's Request Workflow
Mo::option(3), Header "Name" Mo::option(3)
Allow an attribute to be a chainable, boolean option
Hello World!
(DISCOURAGED) Promises/A+ and flow-control helpers
Low-level event reactor base class
Low-level event reactor with libev support
Low-level event reactor with poll support
Allow Moo attributes to get their values from %ENV
allows better merge strategies for multiple config files
allows filename based sort algorithm for multiple config files
Make your Moo-based object constructors blow up on unknown attributes
Allow Moo attributes to be "thunked"
Follow the recomendations in Perl Best Practices
Allows one to specify options/parameters via terminal prompts
Attribute that returns the instance to allow for chaining
Allow compile time traits for classes/roles
Name your accessors get_foo() and set_foo()
metamethod role allowing code attribute introspection
wrapped metamethod role allowing code attribute introspection
Make your object constructors blow up on unknown attributes
Make your object constructors blow up on unknown attributes
Provide a pseudo-class NEXT (et al) that allows method redispatch
fast, flexible, low-level, pure-Perl SNMP library
EPP Low Balance Mapping (EPP-LowBalance-Mapping.pdf) for Net::DRI
Low-level functions useful for both EPP clients and servers
decode and encode NetFlow/IPFIX datagrams
Low-level HTTP connection (client)
Net::HTTP::Spore::Middleware::LogDispatch is a middleware that allow you to use LogDispatch
Low-level HTTP over SSL/TLS connection (client)
Allows you to build up and run a map/reduce operation on Riak
Wrapper for scp that allows passwords via Expect
Low-level read/write buffer class
Wrapper for SSH Blowfish support
Help transition to cursor based access to friends_ids and followers_ids methods
Low level TCP/TLS connection
decode sFlow datagrams
Low-level navigation in the documents
OpenXPKI::Server::Workflow(3), Header(3)
"Name" OpenXPKI::Server::Workflow
OpenXPKI::Server::Workflow::Activity(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity
OpenXPKI::Server::Workflow::Activity::CRLIssuance::CreateQueue(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::CRLIssuance::CreateQueue
OpenXPKI::Server::Workflow::Activity::CRLIssuance::ImportCRL(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::CRLIssuance::ImportCRL
OpenXPKI::Server::Workflow::Activity::CRR::PersistRequest(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::CRR::PersistRequest
OpenXPKI::Server::Workflow::Activity::CSR::GeneratePKCS10(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::CSR::GeneratePKCS10
OpenXPKI::Server::Workflow::Activity::CSR::PersistRequest(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::CSR::PersistRequest
OpenXPKI::Server::Workflow::Activity::CertRenewal::DetermineSubjectStyle(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::DetermineSubjectStyle
OpenXPKI::Server::Workflow::Activity::Log(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Log
OpenXPKI::Server::Workflow::Activity::NICE::CheckForRevocation(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::CheckForRevocation;
OpenXPKI::Server::Workflow::Activity::NICE::FetchCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::IssueCertificate;
OpenXPKI::Server::Workflow::Activity::NICE::FetchKey(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::FetchKey
OpenXPKI::Server::Workflow::Activity::NICE::GenerateKey(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::GenerateKey
OpenXPKI::Server::Workflow::Activity::NICE::IssueCRL(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::IssueCRL;
OpenXPKI::Server::Workflow::Activity::NICE::IssueCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::IssueCertificate;
OpenXPKI::Server::Workflow::Activity::NICE::RenewCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::RenewCertificate;
OpenXPKI::Server::Workflow::Activity::NICE::RevokeCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::RevokeCertificate;
OpenXPKI::Server::Workflow::Activity::NICE::TestConnection(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::TestConnection
OpenXPKI::Server::Workflow::Activity::NICE::UnrevokeCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::NICE::UnrevokeCertificate;
OpenXPKI::Server::Workflow::Activity::Reports::CertExport::GenerateExportFile(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Reports::CertExport::GenerateExportFile
OpenXPKI::Server::Workflow::Activity::Reports::CertExport::GetConfig(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Reports::CertExport::GetConfig
OpenXPKI::Server::Workflow::Activity::Reports::CertExport::TagAsExported(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Reports::CertExport::TagAsExported
OpenXPKI::Server::Workflow::Activity::Reports::Detail(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Reports::Detail
OpenXPKI::Server::Workflow::Activity::Reports::GetList(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Reports::GetList
OpenXPKI::Server::Workflow::Activity::Reports::Summary(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Reports::Summary
OpenXPKI::Server::Workflow::Activity::Reports::Timeline(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Reports::Timeline
OpenXPKI::Server::Workflow::Activity::Skeleton(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Skeleton
OpenXPKI::Server::Workflow::Activity::Tools::AddCertExtension(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::AddCertExtension
OpenXPKI::Server::Workflow::Activity::Tools::AppendCertificateMetadata(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::AppendCertificateMetadata
OpenXPKI::Server::Workflow::Activity::Tools::Approve(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Approve
OpenXPKI::Server::Workflow::Activity::Tools::CRLExport(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::CRLExport
OpenXPKI::Server::Workflow::Activity::Tools::CalculateApprovalPoints(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::CalculateApprovalPoints
OpenXPKI::Server::Workflow::Activity::Tools::CancelApprovals(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::CancelApprovals
OpenXPKI::Server::Workflow::Activity::Tools::CertificateExport(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::CertificateExport
OpenXPKI::Server::Workflow::Activity::Tools::CertificateExportArchive(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::CertificateExportArchive
OpenXPKI::Server::Workflow::Activity::Tools::Connector::GetValue(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Connector::GetValue
OpenXPKI::Server::Workflow::Activity::Tools::CopyCertificateMetadata(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::CopyCertificateMetadata
OpenXPKI::Server::Workflow::Activity::Tools::CopyContextFromWorkflow(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::CopyContextFromWorkflow
OpenXPKI::Server::Workflow::Activity::Tools::Datapool::DeleteEntry(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Datapool::DeleteEntry
OpenXPKI::Server::Workflow::Activity::Tools::Datapool::GetEntry(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Datapool::GetEntry
OpenXPKI::Server::Workflow::Activity::Tools::Datapool::ModifyEntry(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Datapool::ModifyEntry
OpenXPKI::Server::Workflow::Activity::Tools::Datapool::SetEntry(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Datapool::SetEntry
OpenXPKI::Server::Workflow::Activity::Tools::Disconnect(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Disconnect;
OpenXPKI::Server::Workflow::Activity::Tools::EvaluateEligibility(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::EvaluateEligibility
OpenXPKI::Server::Workflow::Activity::Tools::ExportToFile(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::ExportToFile
OpenXPKI::Server::Workflow::Activity::Tools::GenerateKey(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::GenerateKey
OpenXPKI::Server::Workflow::Activity::Tools::GeneratePassword(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::GeneratePassword
OpenXPKI::Server::Workflow::Activity::Tools::GetCertificateIdentifier(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::GetCertificateIdentifier
OpenXPKI::Server::Workflow::Activity::Tools::InjectExtraParam(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::InjectExtraParam
OpenXPKI::Server::Workflow::Activity::Tools::ListActiveToken(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::ListActiveToken
OpenXPKI::Server::Workflow::Activity::Tools::LoadCertificateMetadata(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::LoadCertificateMetadata;
OpenXPKI::Server::Workflow::Activity::Tools::LoadPolicy(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::LoadPolicy
OpenXPKI::Server::Workflow::Activity::Tools::MergeContextHash(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::MergeContextHash
OpenXPKI::Server::Workflow::Activity::Tools::Notify(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Notify
OpenXPKI::Server::Workflow::Activity::Tools::ParseCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::ParseCertificate
OpenXPKI::Server::Workflow::Activity::Tools::ParseCertificateBundle(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::ParseCertificateBundle
OpenXPKI::Server::Workflow::Activity::Tools::ParsePKCS10(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::ParsePKCS10
OpenXPKI::Server::Workflow::Activity::Tools::Pause(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::Pause;
OpenXPKI::Server::Workflow::Activity::Tools::PrepareRenewal(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::PrepareRenewal
OpenXPKI::Server::Workflow::Activity::Tools::PresetProfileFields(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::PresetProfileFields
OpenXPKI::Server::Workflow::Activity::Tools::PublishCA(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::PublishCA
OpenXPKI::Server::Workflow::Activity::Tools::PublishCRL(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::PublishCRLs
OpenXPKI::Server::Workflow::Activity::Tools::PublishCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::PublishCertificate
OpenXPKI::Server::Workflow::Activity::Tools::RelateWorkflow(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::RelateWorkflow;
OpenXPKI::Server::Workflow::Activity::Tools::RenameContext(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::RenameContext
OpenXPKI::Server::Workflow::Activity::Tools::RenderSubject(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::RenderSubject;
OpenXPKI::Server::Workflow::Activity::Tools::RevokeCertificate(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::RevokeCertificate;
OpenXPKI::Server::Workflow::Activity::Tools::SearchWorkflow(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SearchWorkflow
OpenXPKI::Server::Workflow::Activity::Tools::SetAttribute(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SetAttribute
OpenXPKI::Server::Workflow::Activity::Tools::SetContext(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SetContext
OpenXPKI::Server::Workflow::Activity::Tools::SetContextHash(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SetContextHash
OpenXPKI::Server::Workflow::Activity::Tools::SetCreator(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SetCreator
OpenXPKI::Server::Workflow::Activity::Tools::SetErrorCode(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SetErrorCode
OpenXPKI::Server::Workflow::Activity::Tools::SetSource(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SetSource
OpenXPKI::Server::Workflow::Activity::Tools::SetStatusMessage(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::SetStatusMessage
OpenXPKI::Server::Workflow::Activity::Tools::StringToArray(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::StringToArray
OpenXPKI::Server::Workflow::Activity::Tools::TriggerCertificatePublish(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::TriggerCertificatePublish
OpenXPKI::Server::Workflow::Activity::Tools::UpdateContextHash(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::UpdateContextHash
OpenXPKI::Server::Workflow::Activity::Tools::ValidateChallengePassword(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::ValidateChallengePassword
OpenXPKI::Server::Workflow::Activity::Tools::WFArray(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::WFArray
OpenXPKI::Server::Workflow::Activity::Tools::WFHash(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::WFHash
OpenXPKI::Server::Workflow::Activity::User::HashUserPassword(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::User::HashUserPassword
OpenXPKI::Server::Workflow::Activity::User::InsertUserData(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::User::InsertUserData;
OpenXPKI::Server::Workflow::Activity::User::LoadUserData(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::User::LoadUserData;
OpenXPKI::Server::Workflow::Activity::User::PersistUserData(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::User::PersistUserData;
OpenXPKI::Server::Workflow::Activity::WorkflowTest(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::WorkflowTest;
OpenXPKI::Server::Workflow::Condition(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Condition
n .SH "SYNOPSIS private_key_not_empty: class: OpenXPKI::Server::Workflow::Condition::DatapoolEntry param: _map_key: $cert_identifier namespace: certificate.privatekey condition: exists" .SH "SYNOPSIS private_key_not_empty: class: OpenXPKI::Server::Workflow::Condition::DatapoolEntry param: _map_key: $cert_identifier namespace: certificate.privatekey condition: exists" Header "SYNOPSIS private_key_not_empty: class: OpenXPKI::Server::Workflow::Condition::DatapoolEntry param: _map_key: $cert_identifier namespace: certificate.privatekey condition: exists"
Generic class to check a value against a timespec
Check if the profile allows key generation as specified by the "generate" parameter. Example: can_use_server_key: class: OpenXPKI::Server::Workflow::Condition::KeyGenerationMode param: generate: server _map_profile: $cert_profile Returns true if the key generation setting is either escrow, server or both. The setting is obtained for the given profile (by profile or from the default setting) from the node key.generate. If this node is missing, client is allowed and server is assumed ok if key.alg is not empty. If the profile parameter is not given in the configuration, the context value of cert_profile is used
OpenXPKI::Server::Workflow::Observer::Debug(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Observer::Debug
OpenXPKI::Server::Workflow::Observer::Log(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Observer::Log
OpenXPKI::Server::Workflow::Pause(3), Header "Name" OpenXPKI::Server::Workflow::Pause(3)
special Workflow-Exception
OpenXPKI::Server::Workflow::Persister::DBI(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Persister::DBI
OpenXPKI::Server::Workflow::Persister::NoHistory(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Persister::NoHistory
OpenXPKI::Server::Workflow::Persister::Null(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Persister::Null
OpenXPKI::Server::Workflow::Role::Publish(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Role::Publish
OpenXPKI::Server::Workflow::Validator(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Validator
OpenXPKI::Workflow::Factory(3), Header "Name" OpenXPKI::Workflow::Factory(3)
OpenXPKI specific workflow factory
Workflow factory manager
Low-level PDF array object
Low-level PDF boolean object true or false
Low-level dictionary and stream objects
Low-level PDF file access
Low-level PDF name object
Low-level PDF null object
Low-level PDF numeric object
Low-level PDF indirect object
Low-level PDF page object
Low-level page tree object
Low-level PDF string object
Convenience functions for creating low-level PDF objects
-- PDL subclass which allows reading and writing of fixed-length character strings as byte PDLs
-- description of the dataflow philosophy
allow subroutines in the PGPLOT graphics library to be called from Perl
Component to allow interactive peeking into a running POE application
A POE::Component::IRC plugin that provides blowfish encryption
A PoCo-IRC plugin to follow the tail of an ever-growing file
POE::Filter::SSL::PreFilter(3), POE::Filter::SSL::Prefilter(3)
Allow to add a PreFilter on Compontents using Wheels
a bridge that allows POE to be driven by IO::Poll
a bridge that allows POE to be driven by select(2)
a bridge that allows POE to be driven by Tk
follow the tail of an ever-growing file
Low-level perl interface to POSIX sockets
Statements which break out of normal statement flow
Allows your classes to do coercion of parameters
Arguments for method CreateFlowLogs on Paws::EC2
Arguments for method DeleteFlowLogs on Paws::EC2
Arguments for method DescribeFlowLogs on Paws::EC2
Arguments for method AddJobFlowSteps on Paws::EMR
Arguments for method DescribeJobFlows on Paws::EMR
Arguments for method RunJobFlow on Paws::EMR
Arguments for method TerminateJobFlows on Paws::EMR
Perl Interface to AWS Amazon Simple Workflow Service
Arguments for method CountClosedWorkflowExecutions on Paws::SimpleWorkflow
Arguments for method CountOpenWorkflowExecutions on Paws::SimpleWorkflow
Arguments for method CountPendingActivityTasks on Paws::SimpleWorkflow
Arguments for method CountPendingDecisionTasks on Paws::SimpleWorkflow
Arguments for method DeprecateActivityType on Paws::SimpleWorkflow
Arguments for method DeprecateDomain on Paws::SimpleWorkflow
Arguments for method DeprecateWorkflowType on Paws::SimpleWorkflow
Arguments for method DescribeActivityType on Paws::SimpleWorkflow
Arguments for method DescribeDomain on Paws::SimpleWorkflow
Arguments for method DescribeWorkflowExecution on Paws::SimpleWorkflow
Arguments for method DescribeWorkflowType on Paws::SimpleWorkflow
Arguments for method GetWorkflowExecutionHistory on Paws::SimpleWorkflow
Arguments for method ListActivityTypes on Paws::SimpleWorkflow
Arguments for method ListClosedWorkflowExecutions on Paws::SimpleWorkflow
Arguments for method ListDomains on Paws::SimpleWorkflow
Arguments for method ListOpenWorkflowExecutions on Paws::SimpleWorkflow
Arguments for method ListWorkflowTypes on Paws::SimpleWorkflow
Arguments for method PollForActivityTask on Paws::SimpleWorkflow
Arguments for method PollForDecisionTask on Paws::SimpleWorkflow
Arguments for method RecordActivityTaskHeartbeat on Paws::SimpleWorkflow
Arguments for method RegisterActivityType on Paws::SimpleWorkflow
Arguments for method RegisterDomain on Paws::SimpleWorkflow
Arguments for method RegisterWorkflowType on Paws::SimpleWorkflow
Arguments for method RequestCancelWorkflowExecution on Paws::SimpleWorkflow
Arguments for method RespondActivityTaskCanceled on Paws::SimpleWorkflow
Arguments for method RespondActivityTaskCompleted on Paws::SimpleWorkflow
Arguments for method RespondActivityTaskFailed on Paws::SimpleWorkflow
Arguments for method RespondDecisionTaskCompleted on Paws::SimpleWorkflow
Arguments for method SignalWorkflowExecution on Paws::SimpleWorkflow
Arguments for method StartWorkflowExecution on Paws::SimpleWorkflow
Arguments for method TerminateWorkflowExecution on Paws::SimpleWorkflow
Library for accessing PayPal's Payflow Pro HTTP interface
Disallow high-bit characters
disallow bareword before <
disallow duplicate literal hash keys
disallow empty consecutive commas
disallow empty statements (stray semicolons)
Allow unsafe handling of signals in selected blocks
Perlbal's high/low priority queueing system
Allows multiple, nesting configuration files
plugin that allows Perlbal to serve palette altered images
Github v3 User Followers API
Adds headers to allow Cross-Origin Resource Sharing
Allows PSGI apps to include or forward requests recursively
normalises token text to lower case
tokenizer which also lower cases text
allow a module's pod to contain Pod::Coverage hints
Allow off-page links in POD to point to a URL
allow markup in widgets
Allow the user to to perform an InterfaceModel Action
allows using Ctrl+C to interrupt long-running lines
A URI class that allows easy and efficient manipulation of URI components
SOAP::Lite provides several variables to allows programmers and users to modify the behavior of SOAP::Lite in specific ways
this class is an abstract class which allows for multiple types of packaging agents such as MIME and DIME
this class is an abstract class which allows for multiple types of packaging agents such as MIME and DIME
Allow changes in revision log messages
Allow changes in revision properties
Allow debug messages to be easily switched on and off
Scrappy HTTP Request Flow-Control System
allows sorting by a several values
This extended sorting algorithm allows you to a) sort an array by ANY field number, not only the first. b) find duplicates in your data-set and sort them out. The function is case-sensitive. Future versions might come without this limitation
An extensible string validation module (allowing commonly used checks on strings to be called more concisely and consistently)
Compile role - allows for compiling the AST to perl code
Play role - allows for playing out the AST
Stream role - allows for playing out the AST and printing straight to file handle
allow calling of class methods on arbitrary classes
Experimetal stash allowing list/scalar context definition
Allows a field to be matched against a set of checks
The conduit through which all events flow
RSPEC implementation on top of Test2::Workflow
Allow third party tools to safely attach meta-data to your instances
A test workflow is a way of structuring tests using composable units
Base class for all workflow blocks
Represents a build in progress
Runs the workflows
Encapsulation of a Task
Encapsulation of an action
Encapsulation of a group (describe)
Flexible text flowing and word wrapping for not just ASCII output
Flexible word wrapping for not just ASCII output
ASCII Flowchart maker
text formatting routines for RFC2646 format=flowed
Share package vars between templates
Common text filter API
Common text filter API
Perl module for reflowing text files using Knuth's paragraphing algorithm
Allows conversion between Roman and Arabic algarisms
Tickit::Widget::CheckButton(3), "Tickit::Widget::CheckButton"(3)
a widget allowing a toggle true/false option
Tickit::Widget::RadioButton(3), "Tickit::Widget::RadioButton"(3)
a widget allowing a selection from multiple options
keeps insertion order; allows duplicate keys
control over the flow of time
Allow size of packed widgets to be adjusted by user
Extends Try::Tiny to allow retries
turns simple outlines (see below) into UML sequence diagrams
Interchange support for Signio/Verisign Payflow Pro
GUI for copying DVDs, based on an open Low Level API
a sample WWW::Mechanize::Pluggable plugin -head1 SYNOPSIS use WWW::Mechanize::Pluggable; # This module is automatically loaded into WWW::Mechanize::Pluggable
Simple, flexible system to implement workflows
Base class for Workflow actions
Metadata about information required by an Action
a stub for a SMTP capable action
Workflow action for the terminally lazy
Base class with constructor
Evaluate a condition depending on the workflow state and environment
Inline condition that evaluates perl code for truth
Condition to determine if a user is available
Negate workflow condition result
Evaluate nested workflow conditions
Parse configuration files for the workflow components
Parse workflow configurations as Perl data structures
Parse workflow configurations from XML content
Data blackboard for Workflows, Actions, Conditions and Validators
Base class for workflow exceptions
Generates new workflow and supporting objects
Recorded work on a workflow action or workflow itself
Base class for workflow persistence
Persist workflow and history to DBI database
Pull IDs from databases that autogenerate them
Fetch extra data with each workflow and put it into the context
Persister to fetch ID from a sequence
Persist workflow and history to the filesystem
Persister to generate random ID
Persist workflows using SPOPS
Persister to generate Universally Unique Identifiers
Information about an individual state in a workflow
Ensure data are valid
Validator to ensure certain data are in the context
Ensure a value is one of a declared set of values
Ensure a stringified date matches a given pattern
Low-level access to the X11 library
SAX Filter allowing DOM processing of selected subtrees
Store (restore) perl data structures in XML stream
Lowlevel access to James Clark's expat XML parser
Perl extension allowing a simple object representation of a parsed XML::Parser tree
Perl extension allowing a simple(r) object representation of an XML::LibXML DOM object
blowfish(3), setupBFstate(3), bfCBCencrypt(3), bfCBCdecrypt(3), bfECBencrypt(3), bfECBdecrypt (3)
blowfish encryption
extract archive content (low-level)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.17.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex:, (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d -d -w /var/www/thing -d -d (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{",":"/www/eg1/", "":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"":"/var/www"}. (default: {}) P
d.polar(1), d.polar (1)
Draws polar diagram of angle map such as aspect or flow directions
d.what.rast(1), d.what.rast (1)
Allows the user to interactively query raster map layers at user-selected locations
d.what.vect(1), d.what.vect (1)
Allows the user to interactively query vector map layers at user-selected locations
Allows the user to set or check the debug flags used by libbu
Allows the user to set or check the debug flags used by librt
Provides a means to interact with the display manager at a lower level
Allows the user to modify the attributes of a combination
Allows the user to set the direction of an edge by specifying a direction vector in the form of x, y, and z components or via rotation and fallback angles
allows you to write your script in non-ASCII and non-UTF-8
Allows the user to rotate the face of an ARB shape by providing the coefficients of an equation of the desired plane for the face
Low Level Erlang Loader
Low-level Erlang loader
Allows the user to redefine any face of an ARB8 shape
fish-shell Documentation This is the documentation for fish, the friendly interactive shell. A shell is a program that helps you operate your computer by starting other programs. fish offers a command-line interface focused on usability and interactive use. Unlike other shells, fish does not follow the POSIX standard, but still uses roughly the same model. Some of the special features of fish are: 0.0 (bu 2 Extensive UI: Syntax highlighting, autosuggestions, tab completion and selection lists that can be navigated and filtered. (bu 2 No configuration needed: fish is designed to be ready to use immediately, without requiring extensive configuration. (bu 2 Easy scripting: New functions can be added on the fly. The syntax is easy to learn and use. This page explains how to install and set up fish and where to get more information
a grep(1)-like utility for raw flow files
g.gui.gcp(1), g.gui.gcp (1)
Georectifies a map and allows managing Ground Control Points
g.gui.gmodeler(1), g.gui.gmodeler (1)
Graphical Modeler. Allows interactively creating, editing and managing models
g.gui.iclass(1), g.gui.iclass (1)
Tool for supervised classification of imagery data. Generates spectral signatures for an image by allowing the user to outline regions of interest
g.gui.image2target(1), g.gui.image2target (1)
Georectifies a map and allows managing Ground Control Points for 3D correction
g.gui.timeline(1), g.gui.timeline (1)
Allows comparing temporal datasets by displaying their temporal extents in a plot
Delete bigrams found by based on low/high frequency
i.evapo.time(1), i.evapo.time (1)
Computes temporal integration of satellite ET actual (ETa) following the daily ET reference (ETo) from meteorological station(s)
Allows the user to type in the arguments needed to create a shape with the name new_shape_name of the type shape_type. The command may be invoked with no arguments, and it will prompt the user for all needed information
isalpharune(3), islowerrune(3), isspacerune(3), istitlerune(3), isupperrune(3), tolowerrune(3), totitlerune(3), toupperrune(3)
Unicode character classes and cases
iwidgets_extbutton(n), iwidgets::extbutton(n)
Extends the behavior of the Tk button by allowing a bitmap or image to coexist with text
kitty Documentation 0.0 3.5 C kitty [options] [program-to-run ...] P Run the kitty terminal emulator. You can also specify the program to run inside kitty as normal arguments following the options. For example: kitty sh -c "echo hello, world. Press ENTER to quit; read" For comprehensive documentation for kitty, please see: %
kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2. You can reload the config file within kitty by pressing %ctrl+shift+f5 or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing the %ctrl+shift+f6 key. kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the kitty --config option or use the KITTY_CONFIG_DIRECTORY environment variable. See the kitty --config option for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. For example: 0.0 3.5 C include other.conf P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty list-fonts command. By default they are derived automatically, by the OSes font system. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words "HELLO WORLD" display in kitty as "WORLD HELLO", and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 adjust_line_height, adjust_column_width 0.0 3.5 C adjust_line_height 0 adjust_column_width 0 P Change the size of each character cell kitty renders. You can use either numbers, which are interpreted as pixels or percentages (number followed by %), which are interpreted as percentages of the unmodified values. You can use negative pixels or percentages less than 100% to reduce sizes (but this might cause rendering artifacts). 0.0 adjust_baseline 0.0 3.5 C adjust_baseline 0 P Adjust the vertical alignment of text (the height in the cell at which text is positioned). You can use either numbers, which are interpreted as pixels or a percentages (number followed by %), which are interpreted as the percentage of the line height. A positive value moves the baseline up, and a negative value moves them down. The underline and strikethrough positions are adjusted accordingly. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. symbol_map itself can be specified multiple times. Syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features setting. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code Retina includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code Retina also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %Harfbuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, these are read from the FontConfig database first and then this, setting is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty + list-fonts --psnames: 0.0 3.5 C $ kitty + list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero: 0.0 3.5 C font_features FiraCode-Retina +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P Change the sizes of the lines used for the box drawing unicode characters These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P Choose the color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of (block, beam, underline). Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P Defines the thickness of the beam cursor (in pts) 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P Defines the thickness of the underline cursor (in pts) 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval (in seconds) at which to blink the cursor. Set to zero to disable blinking. Negative values mean use system default. Note that numbers smaller than %repaint_delay will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size, used only for browsing the scrollback buffer (in MB). This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII text, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Modify the amount scrolled by the mouse wheel. Note this is only used for low precision scrolling devices, not for high precision scrolling on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Modify the amount scrolled by a touchpad. Note this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. url_style can be one of: none, single, double, curly 0.0 open_url_with 0.0 3.5 C open_url_with default P The program with which to open URLs that are clicked on. The special value default means to use the operating system(aqs default URL handler. 0.0 url_prefixes 0.0 3.5 C url_prefixes http https file ftp gemini irc gopher mailto news git P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, simply selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selections. You can instead specify a name such as a1 to copy to a private kitty buffer instead. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C map cmd+shift+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the unicode database will be matched. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
simple markdown translator
simple markdown translator library
Markdown reference for lowdown
view differences in markdown files
parse a Markdown buffer into formatted output
parse and diff Markdown buffers into formatted output
free a dynamic buffer
allocate a dynamic buffer
compute difference between parsed Markdown trees
free a Markdown parser instance
allocate a Markdown parser
parse a Markdown document into an AST
parse a Markdown file into formatted output
parse and diff Markdown files into formatted output
free a Markdown gemini renderer
allocate a Markdown gemini renderer
render Markdown into gemini
free a Markdown HTML renderer
allocate a Markdown HTML renderer
render Markdown into HTML
free a Markdown LaTeX renderer
allocate a Markdown LaTeX renderer
render Markdown into LaTeX
free rendered metadata key-value pairs
free a parsed Markdown tree
free a Markdown roff renderer
allocate a roff renderer for lowdown documents
render Markdown into roff
free an Markdown terminal renderer
allocate a Markdown terminal renderer
render Markdown into terminal output
render Markdown into debugging output
Kills slow queries
-- Utility for calculating slow stats directly against a MogileFS DB
mp(3), mpsetminbits(3), mpnew(3), mpfree(3), mpbits(3), mpnorm(3), mpcopy(3), mpassign(3), mprand(3), strtomp(3), mpfmt(3), mptoa(3), betomp(3), mptobe(3), letomp(3), mptole(3), mptoui(3), uitomp(3), mptoi(3), itomp(3), uvtomp(3), mptouv(3), vtomp(3), mptov(3), mpdigdiv(3), mpadd(3), mpsub(3), mpleft(3), mpright(3), mpmul(3), mpexp(3), mpmod(3), mpdiv(3), mpfactorial(3), mpcmp(3), mpextendedgcd(3), mpinvert(3), mpsignif(3), mplowbits0(3), mpvecdigmuladd(3), mpvecdigmulsub(3), mpvecadd(3), mpvecsub(3), mpveccmp(3), mpvecmul(3), mpmagcmp(3), mpmagadd(3), mpmagsub(3), crtpre(3), crtin(3), crtout(3), crtprefree(3), crtresfree(3)
extended precision arithmetic
check for execution stack overflow
command line tool for starting OpenXPKI workflows
Allows the user to preview animation scripts in MGED
Insert combinations and regions - allows definition of both boolean expressions and standard attribute values
r.buffer.lowmem(1), r.buffer.lowmem (1)
Creates a raster map showing buffer zones surrounding cells that contain non-NULL category values. This is the low-memory alternative to the classic r.buffer module
r.drain(1), r.drain (1)
Traces a flow through an elevation model or cost surface on a raster map
r.fill.dir(1), r.fill.dir (1)
Filters and generates a depressionless elevation map and a flow direction map from a given elevation raster map
r.flow(1), r.flow (1)
Constructs flowlines. Computes flowlines, flowpath lengths, and flowaccumulation (contributing areas) from a elevation raster map
r.gwflow(1), r.gwflow (1)
Numerical calculation program for transient, confined and unconfined groundwater flow in two dimensions
r.path(1), r.path (1)
Traces paths from starting points following input directions
r.sim.water(1), r.sim.water (1)
Overland flow hydrologic simulation using path sampling method (SIMWE), (1)
Allows creation and/or modification of raster map layer support files
r.terraflow(1), r.terraflow (1)
Performs flow computation for massive grids
r3.flow(1), r3.flow (1)
Computes 3D flow lines and 3D flow accumulation
r3.gwflow(1), r3.gwflow (1)
Numerical calculation program for transient, confined groundwater flow in three dimensions, (1)
Allows creation and/or modification of 3D raster map layer support files
Perl script for reflowing text files using Knuth's paragraphing algorithm
Without a subcommand, the status command returns the following information: current state, view size of the current display manager, the conversion factor from local model units to the base units (mm) stored in the database, and the view matrices of the current display manager
string(3), s_alloc(3), s_append(3), s_array(3), s_copy(3), s_error(3), s_free(3), s_incref(3), s_memappend(3), s_nappend(3), s_new(3), s_newalloc(3), s_parse(3), s_reset(3), s_restart(3), s_terminate(3), s_tolower(3), s_putc(3), s_unique(3), s_grow(3), s_read(3), s_read_line(3), s_getline(3), s_allocinstack(3), s_freeinstack(3), s_rdinstack(3)
extensible strings
convert strings to lowercase
test.r3flow(1), test.r3flow (1)
Testing flow lines
Load your configuration to verify Nagios::Object is compatible with it. -c: path to your main configuration file -l: "relaxed" mode - allow unrecognized attributes on objects, default is strict
tickit_window_raise(3), tickit_window_lower(3)
change window stacking order
shim to allow modules to depend on
v.edit(1), v.edit (1)
Edits a vector map, allows adding, deleting and modifying selected vector features, (1)
Computes the maximum flow between two sets of nodes in the network
Allows drawing of lines and polygons (optionally with per vertex normals) in the MGED graphics display. It is used to build a named list of drawing commands for MGED, send the list to the MGED display, modify the list, or delete all or part of the list
home | help