Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SYSCTL_DECL(9), SYSCTL_ADD_BOOL(9), SYSCTL_ADD_COUNTER_U64(9), SYSCTL_ADD_COUNTER_U64_ARRAY(9), SYSCTL_ADD_INT(9), SYSCTL_ADD_LONG(9), SYSCTL_ADD_NODE(9), SYSCTL_ADD_NODE_WITH_LABEL(9), SYSCTL_ADD_OPAQUE(9), SYSCTL_ADD_PROC(9), SYSCTL_ADD_QUAD(9), SYSCTL_ADD_ROOT_NODE(9), SYSCTL_ADD_S8(9), SYSCTL_ADD_S16(9), SYSCTL_ADD_S32(9), SYSCTL_ADD_S64(9), SYSCTL_ADD_SBINTIME_MSEC(9), SYSCTL_ADD_SBINTIME_USEC(9), SYSCTL_ADD_STRING(9), SYSCTL_ADD_CONST_STRING(9), SYSCTL_ADD_STRUCT(9), SYSCTL_ADD_TIMEVAL_SEC(9), SYSCTL_ADD_U8(9), SYSCTL_ADD_U16(9), SYSCTL_ADD_U32(9), SYSCTL_ADD_U64(9), SYSCTL_ADD_UAUTO(9), SYSCTL_ADD_UINT(9), SYSCTL_ADD_ULONG(9), SYSCTL_ADD_UMA_CUR(9), SYSCTL_ADD_UMA_MAX(9), SYSCTL_ADD_UQUAD(9), SYSCTL_CHILDREN(9), SYSCTL_STATIC_CHILDREN(9), SYSCTL_NODE_CHILDREN(9), SYSCTL_PARENT(9), SYSCTL_BOOL(9), SYSCTL_COUNTER_U64(9), SYSCTL_COUNTER_U64_ARRAY(9), SYSCTL_INT(9), SYSCTL_INT_WITH_LABEL(9), SYSCTL_LONG(9), sysctl_msec_to_ticks(9), SYSCTL_NODE(9), SYSCTL_NODE_WITH_LABEL(9), SYSCTL_OPAQUE(9), SYSCTL_PROC(9), SYSCTL_QUAD(9), SYSCTL_ROOT_NODE(9), SYSCTL_S8(9), SYSCTL_S16(9), SYSCTL_S32(9), SYSCTL_S64(9), SYSCTL_SBINTIME_MSEC(9), SYSCTL_SBINTIME_USEC(9), SYSCTL_STRING(9), SYSCTL_CONST_STRING(9), SYSCTL_STRUCT(9), SYSCTL_TIMEVAL_SEC(9), SYSCTL_U8(9), SYSCTL_U16(9), SYSCTL_U32(9), SYSCTL_U64(9), SYSCTL_UINT(9), SYSCTL_ULONG(9), SYSCTL_UMA_CUR(9), SYSCTL_UMA_MAX(9), SYSCTL_UQUAD(9)
Dynamic and static sysctl MIB creation functions
a64l(3), l64a(3), l64a_r(3)
convert between a long integer and a base-64 ASCII string
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3)
C API to write ATF-based test programs
atol(3), atoll(3)
convert ASCII string to long or long long integer
baudrate(3), erasechar(3), erasewchar(3), has_ic(3), has_il(3), killchar(3), killwchar(3), longname(3), term_attrs(3), termattrs(3), termname(3)
curses environment query routines
fold(1)
fold long lines for finite width output device
freeenv(9), kern_getenv(9), getenv_int(9), getenv_long(9), getenv_string(9), getenv_quad(9), getenv_uint(9), getenv_ulong(9), getenv_bool(9), getenv_is_true(9), getenv_is_false(9), kern_setenv(9), testenv(9), kern_unsetenv(9)
kernel environment variable functions
getopt_long(3), getopt_long_only(3)
get long options from command line argument list
gss_context_time(3)
Determine for how long a context will remain valid
krb5_principal_intro(3)
The principal handing functions. A Kerberos principal is a email address looking string that contains to parts separeted by a @. The later part is the kerbero realm the principal belongs to and the former is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
labs(3)
return the absolute value of a long integer
prison_check(9)
determine if two credentials belong to the same jail
resource_int_value(9), resource_long_value(9), resource_string_value(9)
get a value from the hints mechanism
sigsetjmp(3), siglongjmp(3), setjmp(3), longjmp(3), _setjmp(3), _longjmp(3), longjmperror(3)
non-local jumps
strtol(3), strtoll(3), strtoimax(3), strtoq(3)
convert a string value to a long, long long, intmax_t or quad_t integer
strtoul(3), strtoull(3), strtoumax(3), strtouq(3)
convert a string to an unsigned long, unsigned long long, uintmax_t, or u_quad_t integer
uptime(1)
show how long system has been running
wcstof(3), wcstod(3), wcstold(3)
convert string to float, double or long double
wcstol(3), wcstoul(3), wcstoll(3), wcstoull(3), wcstoimax(3), wcstoumax(3)
convert a wide character string value to a long, unsigned long, long long, unsigned long long, intmax_t or uintmax_t integer
xdr(3), xdr_array(3), xdr_bool(3), xdr_bytes(3), xdr_char(3), xdr_destroy(3), xdr_double(3), xdr_enum(3), xdr_float(3), xdr_free(3), xdr_getpos(3), xdr_hyper(3), xdr_inline(3), xdr_int(3), xdr_long(3), xdr_longlong_t(3), xdrmem_create(3), xdr_opaque(3), xdr_pointer(3), xdrrec_create(3), xdrrec_endofrecord(3), xdrrec_eof(3), xdrrec_skiprecord(3), xdr_reference(3), xdr_setpos(3), xdr_short(3), xdr_sizeof(3), xdrstdio_create(3), xdr_string(3), xdr_u_char(3), xdr_u_hyper(3), xdr_u_int(3), xdr_u_long(3), xdr_u_longlong_t(3), xdr_u_short(3), xdr_union(3), xdr_vector(3), xdr_void(3), xdr_wrapstring(3)
library routines for external data representation
zfs-promote(8)
promote clone dataset to no longer depend on origin snapshot
SSL_alert_type_string(3), SSL_alert_type_string_long(3), SSL_alert_desc_string(3), SSL_alert_desc_string_long(3)
get textual description of alert information
SSL_rstate_string(3), SSL_rstate_string_long(3)
get textual description of state of an SSL object during read operation
SSL_state_string(3), SSL_state_string_long(3)
get textual description of state of an SSL object
GENLIB_PLACE_CON_REF(3)
put a connector on top of a reference belonging an instance in the current figure
GENLIB_PLACE_SEG_REF(3)
put a segment on a reference belonging an instance in the current figure
GENLIB_PLACE_VIA_REF(3)
put a via on top of a reference belonging to an instance in the current figure
HPL_ladd(3)
Adds two long positive integers
HPL_lmul(3)
multiplies 2 long positive integers
Longident(3o)
Long identifiers, used in parsetree
MPE_Log_sync_clocks(4)
synchronize or recalibrate all MPI clocks to minimize the effect of time drift. It is like a longer version of MPI_Comm_barrier( MPI_COMM_WORLD );
Munin::Node::Configure::Plugin(3)
Class representing a plugin, along with its installed and suggested services
OSSL_PARAM_BLD(3ossl), OSSL_PARAM_BLD_new(3ossl), OSSL_PARAM_BLD_to_param(3ossl), OSSL_PARAM_BLD_free(3ossl), OSSL_PARAM_BLD_push_int(3ossl), OSSL_PARAM_BLD_push_uint(3ossl), OSSL_PARAM_BLD_push_long(3ossl), OSSL_PARAM_BLD_push_ulong(3ossl), OSSL_PARAM_BLD_push_int32(3ossl), OSSL_PARAM_BLD_push_uint32(3ossl), OSSL_PARAM_BLD_push_int64(3ossl), OSSL_PARAM_BLD_push_uint64(3ossl), OSSL_PARAM_BLD_push_size_t(3ossl), OSSL_PARAM_BLD_push_time_t(3ossl), OSSL_PARAM_BLD_push_double(3ossl), OSSL_PARAM_BLD_push_BN(3ossl), OSSL_PARAM_BLD_push_BN_pad(3ossl), OSSL_PARAM_BLD_push_utf8_string(3ossl), OSSL_PARAM_BLD_push_utf8_ptr(3ossl), OSSL_PARAM_BLD_push_octet_string(3ossl), OSSL_PARAM_BLD_push_octet_ptr(3ossl)
functions to assist in the creation of OSSL_PARAM arrays
OSSL_PARAM_double(3ossl), OSSL_PARAM_int(3ossl), OSSL_PARAM_int32(3ossl), OSSL_PARAM_int64(3ossl), OSSL_PARAM_long(3ossl), OSSL_PARAM_size_t(3ossl), OSSL_PARAM_time_t(3ossl), OSSL_PARAM_uint(3ossl), OSSL_PARAM_uint32(3ossl), OSSL_PARAM_uint64(3ossl), OSSL_PARAM_ulong(3ossl), OSSL_PARAM_BN(3ossl), OSSL_PARAM_utf8_string(3ossl), OSSL_PARAM_octet_string(3ossl), OSSL_PARAM_utf8_ptr(3ossl), OSSL_PARAM_octet_ptr(3ossl), OSSL_PARAM_END(3ossl), OSSL_PARAM_DEFN(3ossl), OSSL_PARAM_construct_double(3ossl), OSSL_PARAM_construct_int(3ossl), OSSL_PARAM_construct_int32(3ossl), OSSL_PARAM_construct_int64(3ossl), OSSL_PARAM_construct_long(3ossl), OSSL_PARAM_construct_size_t(3ossl), OSSL_PARAM_construct_time_t(3ossl), OSSL_PARAM_construct_uint(3ossl), OSSL_PARAM_construct_uint32(3ossl), OSSL_PARAM_construct_uint64(3ossl), OSSL_PARAM_construct_ulong(3ossl), OSSL_PARAM_construct_BN(3ossl), OSSL_PARAM_construct_utf8_string(3ossl), OSSL_PARAM_construct_utf8_ptr(3ossl), OSSL_PARAM_construct_octet_string(3ossl), OSSL_PARAM_construct_octet_ptr(3ossl), OSSL_PARAM_construct_end(3ossl), OSSL_PARAM_locate(3ossl), OSSL_PARAM_locate_const(3ossl), OSSL_PARAM_get_double(3ossl), OSSL_PARAM_get_int(3ossl), OSSL_PARAM_get_int32(3ossl), OSSL_PARAM_get_int64(3ossl), OSSL_PARAM_get_long(3ossl), OSSL_PARAM_get_size_t(3ossl), OSSL_PARAM_get_time_t(3ossl), OSSL_PARAM_get_uint(3ossl), OSSL_PARAM_get_uint32(3ossl), OSSL_PARAM_get_uint64(3ossl), OSSL_PARAM_get_ulong(3ossl), OSSL_PARAM_get_BN(3ossl), OSSL_PARAM_get_utf8_string(3ossl), OSSL_PARAM_get_octet_string(3ossl), OSSL_PARAM_get_utf8_ptr(3ossl), OSSL_PARAM_get_octet_ptr(3ossl), OSSL_PARAM_get_utf8_string_ptr(3ossl), OSSL_PARAM_get_octet_string_ptr(3ossl), OSSL_PARAM_set_double(3ossl), OSSL_PARAM_set_int(3ossl), OSSL_PARAM_set_int32(3ossl), OSSL_PARAM_set_int64(3ossl), OSSL_PARAM_set_long(3ossl), OSSL_PARAM_set_size_t(3ossl), OSSL_PARAM_set_time_t(3ossl), OSSL_PARAM_set_uint(3ossl), OSSL_PARAM_set_uint32(3ossl), OSSL_PARAM_set_uint64(3ossl), OSSL_PARAM_set_ulong(3ossl), OSSL_PARAM_set_BN(3ossl), OSSL_PARAM_set_utf8_string(3ossl), OSSL_PARAM_set_octet_string(3ossl), OSSL_PARAM_set_utf8_ptr(3ossl), OSSL_PARAM_set_octet_ptr(3ossl), OSSL_PARAM_UNMODIFIED(3ossl), OSSL_PARAM_modified(3ossl), OSSL_PARAM_set_all_unmodified(3ossl)
OSSL_PARAM helpers
SSL_alert_type_string(3), SSL_alert_type_string_long(3), SSL_alert_desc_string(3), SSL_alert_desc_string_long(3)
get textual description of alert information
SSL_alert_type_string(3ossl), SSL_alert_type_string_long(3ossl), SSL_alert_desc_string(3ossl), SSL_alert_desc_string_long(3ossl)
get textual description of alert information
SSL_rstate_string(3), SSL_rstate_string_long(3)
get textual description of state of an SSL object during read operation
SSL_rstate_string(3ossl), SSL_rstate_string_long(3ossl)
get textual description of state of an SSL object during read operation
SSL_state_string(3), SSL_state_string_long(3)
get textual description of state of an SSL object
SSL_state_string(3ossl), SSL_state_string_long(3ossl)
get textual description of state of an SSL object
TIFFGetBitRevTable(3tiff), TIFFReverseBits(3tiff), TIFFSwabShort(3tiff), TIFFSwabLong(3tiff), TIFFSwabArrayOfShort(3tiff), TIFFSwabArrayOfLong(3tiff)
byte- and bit-swapping routines
Tcl_ExprBoolean.tcl85(3), Tcl_ExprLong(3), Tcl_ExprDouble(3), Tcl_ExprBoolean(3), Tcl_ExprString(3)
evaluate an expression
Tcl_ExprBoolean.tcl86(3), Tcl_ExprLong(3), Tcl_ExprDouble(3), Tcl_ExprBoolean(3), Tcl_ExprString(3)
evaluate an expression
Tcl_ExprBoolean.tcl87(3), Tcl_ExprLong(3), Tcl_ExprDouble(3), Tcl_ExprBoolean(3), Tcl_ExprString(3)
evaluate an expression
Tcl_ExprBooleanObj.tcl85(3), Tcl_ExprLongObj(3), Tcl_ExprDoubleObj(3), Tcl_ExprBooleanObj(3), Tcl_ExprObj(3)
evaluate an expression
Tcl_ExprBooleanObj.tcl86(3), Tcl_ExprLongObj(3), Tcl_ExprDoubleObj(3), Tcl_ExprBooleanObj(3), Tcl_ExprObj(3)
evaluate an expression
Tcl_ExprBooleanObj.tcl87(3), Tcl_ExprLongObj(3), Tcl_ExprDoubleObj(3), Tcl_ExprBooleanObj(3), Tcl_ExprObj(3)
evaluate an expression
Tcl_GetBignumFromObj.tcl85(3), Tcl_NewIntObj(3), Tcl_NewLongObj(3), Tcl_NewWideIntObj(3), Tcl_SetIntObj(3), Tcl_SetLongObj(3), Tcl_SetWideIntObj(3), Tcl_GetIntFromObj(3), Tcl_GetLongFromObj(3), Tcl_GetWideIntFromObj(3), Tcl_NewBignumObj(3), Tcl_SetBignumObj(3), Tcl_GetBignumFromObj(3), Tcl_TakeBignumFromObj(3)
manipulate Tcl objects as integer values
Tcl_GetBignumFromObj.tcl86(3), Tcl_NewIntObj(3), Tcl_NewLongObj(3), Tcl_NewWideIntObj(3), Tcl_SetIntObj(3), Tcl_SetLongObj(3), Tcl_SetWideIntObj(3), Tcl_GetIntFromObj(3), Tcl_GetLongFromObj(3), Tcl_GetWideIntFromObj(3), Tcl_NewBignumObj(3), Tcl_SetBignumObj(3), Tcl_GetBignumFromObj(3), Tcl_TakeBignumFromObj(3)
manipulate Tcl values as integers
Tcl_GetBignumFromObj.tcl87(3), Tcl_NewIntObj(3), Tcl_NewLongObj(3), Tcl_NewWideIntObj(3), Tcl_SetIntObj(3), Tcl_SetLongObj(3), Tcl_SetWideIntObj(3), Tcl_GetIntFromObj(3), Tcl_GetIntForIndex(3), Tcl_GetLongFromObj(3), Tcl_GetWideIntFromObj(3), Tcl_NewBignumObj(3), Tcl_SetBignumObj(3), Tcl_GetBignumFromObj(3), Tcl_TakeBignumFromObj(3)
manipulate Tcl values as integers
XmClipboardWithdrawFormat(3)
A clipboard function that indicates that the application no longer wants to supply a data item "XmClipboardWithdrawFormat" "clipboard functions" "XmClipboardWithdrawFormat"
XmFontListFreeFontContext(3)
A font list function that instructs the toolkit that the font list context is no longer needed "XmFontListFreeFontContext" "font list functions" "XmFontListFreeFontContext"
aemtu(1), aegis make transparent undo(1)
no longer make branch file transparent
afQuery(3), afQueryLong(3), afQueryDouble(3), afQueryPointer(3)
query the capabilities of the Audio File Library
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3)
C API to write ATF-based test programs
baudrate(3x), erasechar(3x), erasewchar(3x), has_ic(3x), has_il(3x), killchar(3x), killwchar(3x), longname(3x), term_attrs(3x), termattrs(3x), termname(3x)
curses environment query routines
calc_spline(3)
Calculates a series of values along a Bezier spline. Allegro game programming library
clig_Description(n), ::clig::Description(n)
set long description text to be included in a manual page
clig_Long(n), ::clig::Long(n)
declare an option with parameters of type long
cmp_set_offset(3), cmp_struct(3), cmp_char(3), cmp_short(3), cmp_int(3), cmp_long(3), cmp_float(3), cmp_double(3), cmp_long_double(3), cmp_schar(3), cmp_uchar(3), cmp_ushort(3), cmp_uint(3), cmp_ulong(3), cmp_charptr(3), cmp_chararr(3)
comparison functions for qsort, bsearch, and others
curl_multi_timeout(3)
how long to wait for action before proceeding
cxUnlinkModule(3)
Notifies libcomprex that the module is no longer being used
do_line(3)
Calculates all the points along a line. Allegro game programming library
explain_strtol_or_die(3)
convert a string to a long integer and report errors require_index { "convert a string to a long integer and report errors" }
explain_strtoll_or_die(3)
convert a string to a long integer and report errors require_index { "convert a string to a long integer and report errors" }
explain_strtoul_or_die(3)
convert string to unsigned long and report errors require_index { "convert a string to an unsigned long integer and report errors" }
explain_strtoull_or_die(3)
convert string to integer and report errors require_index { "convert a string to an unsigned long integer and report errors" }
forward3d_model(3), forward3d_model (3)
Push the model along its view vector
get_align_matrix(3)
Rotates a matrix to align it along specified coordinate vectors. Allegro game programming library
git-push(1)
Update remote refs along with associated objects
gleExtrusion(3)
Extrude arbitrary 2D contour along arbitrary 3D path
gleExtrusion(3gle)
Extrude arbitrary 2D contour along arbitrary 3D path
gleLathe(3)
Sweep using a Z-axis shear to create an arbitrary contour along a helical path
gleLathe(3gle)
Sweep using a Z-axis shear to create an arbitrary contour along a helical path
gleSpiral(3)
Sweep an arbitrary contour along a helical path
gleSpiral(3gle)
Sweep an arbitrary contour along a helical path
gleSuperExtrusion(3)
Extrude arbitrary 2D contour along arbitrary 3D path, specifying local affine transformations
gleSuperExtrusion(3gle)
Extrude arbitrary 2D contour along arbitrary 3D path, specifying local affine transformations
gleTwistExtrusion(3)
Extrude arbitrary 2D contour along arbitrary 3D path, specifying local rotations (twists)
gleTwistExtrusion(3gle)
Extrude arbitrary 2D contour along arbitrary 3D path, specifying local rotations (twists)
guptime(1), uptime(1)
tell how long the system has been running
hdir(1)
display an HFS directory in long format
hopalong(6)
draw real plane fractals
hwlocality_linux_libnuma_ulongs(3)
Interoperability with Linux libnuma unsigned long masks
incatalog(3)
test if cell belongs to the catalog file man1/alc_origin.1
incatalogdelete(3)
test if cell belongs to the catalog file man1/alc_origin.1
incatalogfeed(3)
test if cell belongs to the catalog file man1/alc_origin.1
incataloggds(3)
test if cell belongs to the catalog file man1/alc_origin.1
kermit(1)
C(hyKermit 9.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic (if not advanced) use of C(hyKermit 9.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 9.0 from earlier releases. This document is also available as a Web page at: http://www.columbia.edu/kermit/ckututor.html
krb5_principal_intro(3), krb5_principal_introThe principal handing functions.(3)
A Kerberos principal is a email address looking string that contains two parts separated by . The second part is the kerberos realm the principal belongs to and the first is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
ldns_str2period(3)
converts a ttl value (like 5d2h) to a long
libowfat_buffer_put8long(3), buffer_put8long(3)
write an octal ASCII representation of an unsigned long integer to buffer
libowfat_buffer_putlong(3), buffer_putlong(3)
write a decimal ASCII representation of a signed long integer to buffer
libowfat_buffer_putlonglong(3), buffer_putlonglong(3)
write a decimal ASCII representation of a signed long integer to buffer
libowfat_buffer_putulong(3), buffer_putulong(3)
write a decimal ASCII representation of an unsigned long integer to buffer
libowfat_buffer_putulonglong(3), buffer_putulonglong(3)
write a decimal ASCII representation of a signed long integer to buffer
libowfat_buffer_putxlong(3), buffer_putxlong(3)
write a hexidecimal ASCII representation of an unsigned long integer to buffer
libowfat_fmt_8long(3), fmt_8long(3)
write an octal ASCII representation of an unsigned long integer
libowfat_fmt_human(3), fmt_human(3)
write a human readable ASCII representation of a long integer
libowfat_fmt_humank(3), fmt_humank(3)
write a human readable ASCII representation of a long integer
libowfat_fmt_long(3), fmt_long(3)
write an ASCII representation of a long integer
libowfat_fmt_longlong(3), fmt_longlong(3)
write an ASCII representation of a long long integer
libowfat_fmt_ulong(3), fmt_ulong(3)
write an ASCII representation of an unsigned long integer
libowfat_fmt_ulong0(3), fmt_ulong0(3)
write a zero-padded ASCII representation of an unsigned long integer
libowfat_fmt_ulonglong(3), fmt_ulonglong(3)
write an ASCII representation of an unsigned long long integer
libowfat_fmt_xlong(3), fmt_xlong(3)
write a hexadecimal ASCII representation of an unsigned long integer
libowfat_fmt_xlonglong(3), fmt_xlonglong(3)
write a hexadecimal ASCII representation of an unsigned long long integer
libowfat_scan_8long(3), scan_8long(3)
parse an unsigned long integer in octal ASCII representation
libowfat_scan_long(3), scan_long(3)
parse an long integer in decimal ASCII representation
libowfat_scan_longlong(3), scan_longlong(3)
parse a long integer in decimal ASCII representation
libowfat_scan_ulong(3), scan_ulong(3)
parse an unsigned long integer in decimal ASCII representation
libowfat_scan_ulonglong(3), scan_ulonglong(3)
parse an unsigned long integer in decimal ASCII representation
libowfat_scan_xlong(3), scan_xlong(3)
parse an unsigned long integer in hexadecimal ASCII representation
libowfat_scan_xlonglong(3), scan_xlonglong(3)
parse an unsigned long long integer in hexadecimal ASCII representation
libowfat_stralloc_catlong0(3), stralloc_catlong0(3)
append an integer to a stralloc
libowfat_stralloc_catulong0(3), stralloc_catulong0(3)
append an integer to a stralloc
ll2utm(1)
Convert Latitude and Longitude to UTM coordinates
page_name(3), page_namePKIX/X.509 Names(3)
There are several names in PKIX/X.509, GeneralName and Name. A Name consists of an ordered list of Relative Distinguished Names (RDN). Each RDN consists of an unordered list of typed strings. The types are defined by OID and have long and short description. For example id-at-commonName (2.5.4.3) have the long name CommonName and short name CN. The string itself can be of several encoding, UTF8, UTF16, Teltex string, etc. The type limit what encoding should be used. GeneralName is a broader nametype that can contains al kind of stuff like Name, IP addresses, partial Name, etc. Name is mapped into a hx509_name object. Parse and string name into a hx509_name object with hx509_parse_name(), make it back into string representation with hx509_name_to_string(). Name string are defined rfc2253, rfc1779 and X.501. See the library functions here: hx509 name functions
phosphor(6)
simulates an old terminal with long-sustain phosphor
rmap(1)
Map portions of the earth from long/lat info
rwcombine(1)
Combine flows denoting a long-lived session into a single flow
samechflags(1)
change file flags samechmod change file modes samechown change file owner and group samecp copies the first file of a pair of duplicate files samedelay delays line output until the files are no longer in use sameln links duplicate files together samemv moves the first file of a pair of duplicate files samerm remove the last of a pair of duplicate files
sg_read_long(8)
send a SCSI READ LONG command
sg_write_long(8)
send SCSI WRITE LONG command
sliceprint(1)
slice documents with long lines
stop_audio_stream(3)
Destroys an audio stream when it is no longer required. Allegro game programming library
tclgeomap_procs(n), latitude(n), longitude(n), latlon(n), circle(n), fillsegment(n), grid_list(n), ocean_list(n)
supplementary procedures for tclgeomap
th_get_pathname(3), th_get_uid(3), th_get_gid(3), th_get_mode(3), th_get_crc(3), th_get_size(3), th_get_mtime(3), th_get_devmajor(3), th_get_devminor(3), th_get_linkname(3)
extract individual fields of a tar header TH_ISREG, TH_ISLNK, TH_ISSYM, TH_ISCHR, TH_ISBLK, TH_ISDIR, TH_ISFIFO - determine what kind of file a tar header refers to TH_ISLONGNAME, TH_ISLONGLINK - determine whether the GNU extensions are in use
th_print(3), th_print_long_ls(3)
print out information about a tar file header
utm2ll(1)
Convert UTM coordinates to Latitude and Longitude
webpinfo(1)
print out the chunk level structure of WebP files along with basic integrity checks
while.tcl85(n), while(n)
Execute script repeatedly as long as a condition is met
while.tcl86(n), while(n)
Execute script repeatedly as long as a condition is met
while.tcl87(n), while(n)
Execute script repeatedly as long as a condition is met
zfs-promote(8)
promote clone dataset to no longer depend on origin snapshot
Algorithm::LCS(3)
Fast (XS) implementation of the Longest Common Subsequence (LCS) Algorithm
AnyEvent::Subprocess::Job::Delegate::Timeout(3)
Kill a subprocess if it takes too long
App::Cmd::ArgProcessor(3)
App::Cmd-specific wrapper for Getopt::Long::Descriptive
App::Yath::Command::speedtag(3)
Tag tests with duration (short medium long) using a source log
AppConfig::Getopt(3)
Perl5 module for processing command line arguments via delegation to Getopt::Long
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
CLI::Osprey::Descriptive(3)
Getopt::Long::Descriptive subclass for CLI::Osprey use
DJabberd::Component::Node(3)
Specialization of DJabberd::Agent::Node that knows it belongs to a component
Data::Page::Pageset(3)
change long page list to be shorter and well navigate
Data::Remember::DBM(3)
a long-term memory brain plugin for Data::Remember
Data::TemporaryBag(3)
Handle long size data using temporary file
DateTime::Calendar::Mayan(3)
The Mayan Long Count, Haab, and Tzolkin calendars
Devel::REPL::Plugin::Interrupt(3)
Traps SIGINT to kill long-running lines
DtMmdbBookGetLongTitle(3)
obtains the long title of a book
DtMmdbSectionGetLongTitle(3)
obtains the long title for a section
Form::Sensible::Field::LongText(3)
Field for representing large amounts of character-string data
Geo::Coordinates::UTM(3)
Perl extension for Latitiude Longitude conversions
Geo::IP2Location(3)
Fast lookup of country, region, city, latitude, longitude, ZIP code, time zone, ISP, domain name, connection type, IDD code, area code, weather station code and station, MCC, MNC, mobile carrier brand name, elevation and usage type from IP address by using IP2Location database. It supports both IPv4 and IPv6 addressing. Please visit http://www.ip2location.com for more information
Getargs::Long(3)
Named subroutine arguments, with optional type checking
Getopt::Attribute(3)
Attribute wrapper for Getopt::Long
Getopt::Compact(3)
getopt processing in a compact statement with both long and short options, and usage functionality
Getopt::EX::Long(3)
Getopt::Long compatible glue module
Getopt::Long(3)
Extended processing of command line options
Getopt::Long::Descriptive(3)
Getopt::Long, but simpler and more powerful
Getopt::Long::Descriptive::Opts(3)
object representing command line switches
Getopt::Long::Descriptive::Usage(3)
the usage description for GLD
Graphics::Primitive::Operation::Stroke(3)
Draw along a path
Gungho::Plugin::Apoptosis(3)
Stop Execution In Long-Running Processes
HTTP::Throwable::Role::Status::RequestURITooLong(3)
414 Request-URI Too Long
LaTeX::Table::Types::Longtable(3)
Create multi-page LaTeX tables with the longtable package
Long::Jump(3)
Mechanism for returning to a specific point from a deeply nested stack
Module::Install::Bundle(3)
Bundle distributions along with your distribution
MooX::Options::Descriptive(3)
This method extend Getopt::Long::Descriptive to change the usage method
MooseX::Getopt::Basic(3)
MooseX::Getopt::Basic - role to implement the Getopt::Long functionality
MooseX::Getopt::GLD(3)
A Moose role for processing command line options with Getopt::Long::Descriptive
Net::DNS::Check::Test::host_ip_private(3)
Check if the IP addresses found during the hosts resolution do not belong to IP private classes
Perl::Critic::Policy::ControlStructures::ProhibitCascadingIfElse(3)
Don't write long "if-elsif-elsif-elsif-elsif...else" chains
Perl::Critic::Policy::RegularExpressions::ProhibitComplexRegexes(3)
Split long regexps into smaller "qr//" chunks
Perl::Critic::Policy::TestingAndDebugging::ProhibitProlongedStrictureOverride(3)
Don't turn off strict for large blocks of code
Perl::Critic::Policy::Tics::ProhibitLongLines(3)
80 x 40 for life!
Perl::Critic::Policy::ValuesAndExpressions::ProhibitLongChainsOfMethodCalls(3)
Long chains of method calls indicate tightly coupled code
Perl::Critic::Policy::ValuesAndExpressions::RestrictLongStrings(3)
Stop mixing long strings with code
Reply::Plugin::Interrupt(3)
allows using Ctrl+C to interrupt long-running lines
Reply::Plugin::Pager(3)
command to automatically open long results in a pager
String::LCSS(3)
Find The Longest Common Substring of Two Strings
String::LRC(3), LRC(3)
Perl interface for longitudinal redundancy check generation
String::Truncate(3)
a module for when strings are too long to be displayed in
Sys::Hostname::FQDN(3), Sys::Hostname::FQDN(3)
Get the short or long hostname
Sys::Hostname::Long(3)
Try every conceivable way to get full hostname
SyslogScan::Usage(3)
-- encapsulates the total volumes of mail broadcast, sent, and received through sendmail by a single user or group. SyslogScan::Volume -- encapsulates a number of messages along with a total number of bytes
Test::LongString(3)
tests strings for equality, with more helpful failures
Text::Bidi::Array::Long(3)
Dual-life long arrays
Text::Wrapper(3)
Word wrap text by breaking long lines
Time::Out(3)
Easily timeout long running operations
Tk::Getopt(3)
User configuration window for Tk with interface to Getopt::Long
WWW::LongURL(3)
Perl interface to the LongURL API
astol(3), astol()(3)
converts ASCII to long
bk-comps(1), bk comps(1)
list the components belonging to a product
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
copyeval(nged)
Creates a new primitive object called new_ primitiveby applying the transformation matrices accumulated along the path_to_old_primitive to the leaf primitive shape object at the end of the path and saving the result under the name new_ primitive
d.geodesic(1), d.geodesic (1)
Displays a geodesic line, tracing the shortest distance between two geographic points along a great circle, in a longitude/latitude data set
d.rhumbline(1), d.rhumbline (1)
Displays the rhumbline joining two longitude/latitude coordinates
fish-completions(1)
Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
help(nged)
Returns a list of available MGED commands along with a one-line usage message for each. If a command is supplied as an argument, the one-line usage message for that command is returned
helpdevel(nged)
Returns a list of available developer commands along with a one-line usage message for each. If a command is supplied as an argument, the one-line usage message for that command is returned
helplib(nged)
Returns a list of available library commands along with a one-line usage message for each. If a command is supplied as an argument, the one-line usage message for that command is returned
mirface(nged)
Modifies an ARB shape by mirroring the indicated face along the selected x, y, or z axis
qvrot(nged)
Adjusts the current MGED viewing direction such that the eye is positioned along the direction vector (dx dy dz) from the view center and is looking towards the view center
r.latlong(1), r.latlong (1)
Creates a latitude/longitude raster map
r.transect(1), r.transect (1)
Outputs raster map layer values lying along user defined transect line(s)
sendfd(3), recvfd(3)
pass file descriptors along Unix domain sockets
setjmp(3), longjmp(3), notejmp(3)
non-local goto
showmats(nged)
Lists the transformation matrices encountered along the specified path and also lists the accumulated matrix at the end of the path
time(1)
measure how long a command or block takes
v.to.points(1), v.to.points (1)
Creates points along input lines in new vector map with 2 layers
home | help