Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ATOMIC_VAR_INIT(3), atomic_init(3), atomic_load(3), atomic_store(3), atomic_exchange(3), atomic_compare_exchange_strong(3), atomic_compare_exchange_weak(3), atomic_fetch_add(3), atomic_fetch_and(3), atomic_fetch_or(3), atomic_fetch_sub(3), atomic_fetch_xor(3), atomic_is_lock_free(3)
type-generic atomic operations
INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3)
SNMP daemon loadable module interface
VFS_SET(9)
set up loadable file system vfsconf
ath3kfw(8)
firmware download utility for Atheros AR3011/AR3012 chip based Bluetooth USB devices
atomic_add(9), atomic_clear(9), atomic_cmpset(9), atomic_fcmpset(9), atomic_fetchadd(9), atomic_interrupt_fence(9), atomic_load(9), atomic_readandclear(9), atomic_set(9), atomic_subtract(9), atomic_store(9), atomic_thread_fence(9)
atomic operations
bcmfw(8)
firmware download utility for Broadcom BCM2033 chip based Bluetooth USB devices
bhyveload(8)
load a guest inside a bhyve virtual machine
boot1.efi(8)
UEFI chain loader
bus_dma(9), bus_dma_tag_create(9), bus_dma_tag_destroy(9), bus_dma_template_init(9), bus_dma_template_tag(9), bus_dma_template_clone(9), bus_dma_template_fill(9), BUS_DMA_TEMPLATE_FILL(9), bus_dmamap_create(9), bus_dmamap_destroy(9), bus_dmamap_load(9), bus_dmamap_load_bio(9), bus_dmamap_load_ccb(9), bus_dmamap_load_crp(9), bus_dmamap_load_crp_buffer(9), bus_dmamap_load_mbuf(9), bus_dmamap_load_mbuf_sg(9), bus_dmamap_load_uio(9), bus_dmamap_unload(9), bus_dmamap_sync(9), bus_dmamem_alloc(9), bus_dmamem_free(9)
Bus and Machine Independent DMA Mapping Interface
dlinfo(3)
information about dynamically loaded object
firmware_register(9), firmware_unregister(9), firmware_get(9), firmware_get_flags(9), firmware_put(9)
firmware image loading and management
getloadavg(3)
get system load averages
iwmbtfw(8)
firmware download utility for Intel Wireless 8260/8265 chip based Bluetooth USB devices
kld_isloaded(3), kld_load(3)
kld utility functions
kldload(2)
load KLD files into the kernel
kldload(8)
load a file into the kernel
kldunload(2), kldunloadf(2)
unload kld files
kldunload(8)
unload a file from the kernel
kldxref(8)
generate hints for the kernel loader
kvm_getloadavg(3)
get load average of the system
kyua-config(1), kyua config(1)
Inspects the values of the loaded configuration
libmagic(3), magic_open(3), magic_close(3), magic_error(3), magic_errno(3), magic_descriptor(3), magic_buffer(3), magic_getflags(3), magic_setflags(3), magic_check(3), magic_compile(3), magic_list(3), magic_load(3), magic_load_buffers(3), magic_setparam(3), magic_getparam(3), magic_version(3)
Magic number recognition library
libstdbuf(3)
preloaded library to change standard streams initial buffering
link(5)
dynamic loader and link editor interface
loader(8)
kernel bootstrapping final stage
loader.4th(8)
loader.conf processing tools
loader.conf(5)
system bootstrap configuration information
loader.efi(8)
UEFI kernel loader
nfsuserd(8)
load user and group information into the kernel for NFSv4 services plus support manage-gids for all NFS versions
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
PCI bus interface
pmc_set(3)
set the reload count of a sampling PMC
pxeboot(8)
Preboot Execution Environment (PXE) bootloader
sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3)
lookup name of various enumerated values
uathload(8)
firmware loader for Atheros USB wireless driver
zfs-load-key(8)
Load, unload, or change the encryption key used to access a dataset
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3)
OpenSSL configuration functions
CTLOG_STORE_new(3), CTLOG_STORE_free(3), CTLOG_STORE_load_default_file(3), CTLOG_STORE_load_file(3)
Create and populate a Certificate Transparency log list
DTLS_get_data_mtu(3)
Get maximum data payload size
ENGINE_get_DH(3), ENGINE_get_DSA(3), ENGINE_by_id(3), ENGINE_get_cipher_engine(3), ENGINE_get_default_DH(3), ENGINE_get_default_DSA(3), ENGINE_get_default_RAND(3), ENGINE_get_default_RSA(3), ENGINE_get_digest_engine(3), ENGINE_get_first(3), ENGINE_get_last(3), ENGINE_get_next(3), ENGINE_get_prev(3), ENGINE_new(3), ENGINE_get_ciphers(3), ENGINE_get_ctrl_function(3), ENGINE_get_digests(3), ENGINE_get_destroy_function(3), ENGINE_get_finish_function(3), ENGINE_get_init_function(3), ENGINE_get_load_privkey_function(3), ENGINE_get_load_pubkey_function(3), ENGINE_load_private_key(3), ENGINE_load_public_key(3), ENGINE_get_RAND(3), ENGINE_get_RSA(3), ENGINE_get_id(3), ENGINE_get_name(3), ENGINE_get_cmd_defns(3), ENGINE_get_cipher(3), ENGINE_get_digest(3), ENGINE_add(3), ENGINE_cmd_is_executable(3), ENGINE_ctrl(3), ENGINE_ctrl_cmd(3), ENGINE_ctrl_cmd_string(3), ENGINE_finish(3), ENGINE_free(3), ENGINE_get_flags(3), ENGINE_init(3), ENGINE_register_DH(3), ENGINE_register_DSA(3), ENGINE_register_RAND(3), ENGINE_register_RSA(3), ENGINE_register_all_complete(3), ENGINE_register_ciphers(3), ENGINE_register_complete(3), ENGINE_register_digests(3), ENGINE_remove(3), ENGINE_set_DH(3), ENGINE_set_DSA(3), ENGINE_set_RAND(3), ENGINE_set_RSA(3), ENGINE_set_ciphers(3), ENGINE_set_cmd_defns(3), ENGINE_set_ctrl_function(3), ENGINE_set_default(3), ENGINE_set_default_DH(3), ENGINE_set_default_DSA(3), ENGINE_set_default_RAND(3), ENGINE_set_default_RSA(3), ENGINE_set_default_ciphers(3), ENGINE_set_default_digests(3), ENGINE_set_default_string(3), ENGINE_set_destroy_function(3), ENGINE_set_digests(3), ENGINE_set_finish_function(3), ENGINE_set_flags(3), ENGINE_set_id(3), ENGINE_set_init_function(3), ENGINE_set_load_privkey_function(3), ENGINE_set_load_pubkey_function(3), ENGINE_set_name(3), ENGINE_up_ref(3), ENGINE_get_table_flags(3), ENGINE_cleanup(3), ENGINE_load_builtin_engines(3), ENGINE_register_all_DH(3), ENGINE_register_all_DSA(3), ENGINE_register_all_RAND(3), ENGINE_register_all_RSA(3), ENGINE_register_all_ciphers(3), ENGINE_register_all_digests(3), ENGINE_set_table_flags(3), ENGINE_unregister_DH(3), ENGINE_unregister_DSA(3), ENGINE_unregister_RAND(3), ENGINE_unregister_RSA(3), ENGINE_unregister_ciphers(3), ENGINE_unregister_digests(3)
ENGINE cryptographic module support
ERR_load_crypto_strings(3), SSL_load_error_strings(3), ERR_free_strings(3)
load and free error strings
ERR_load_strings(3), ERR_PACK(3), ERR_get_next_error_library(3)
load arbitrary error strings
OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3)
add standard configuration modules
OSSL_STORE_CTX(3), OSSL_STORE_post_process_info_fn(3), OSSL_STORE_open(3), OSSL_STORE_ctrl(3), OSSL_STORE_load(3), OSSL_STORE_eof(3), OSSL_STORE_error(3), OSSL_STORE_close(3)
Types and functions to read objects from a URI
OSSL_STORE_LOADER(3), OSSL_STORE_LOADER_CTX(3), OSSL_STORE_LOADER_new(3), OSSL_STORE_LOADER_get0_engine(3), OSSL_STORE_LOADER_get0_scheme(3), OSSL_STORE_LOADER_set_open(3), OSSL_STORE_LOADER_set_ctrl(3), OSSL_STORE_LOADER_set_expect(3), OSSL_STORE_LOADER_set_find(3), OSSL_STORE_LOADER_set_load(3), OSSL_STORE_LOADER_set_eof(3), OSSL_STORE_LOADER_set_error(3), OSSL_STORE_LOADER_set_close(3), OSSL_STORE_LOADER_free(3), OSSL_STORE_register_loader(3), OSSL_STORE_unregister_loader(3), OSSL_STORE_open_fn(3), OSSL_STORE_ctrl_fn(3), OSSL_STORE_expect_fn(3), OSSL_STORE_find_fn(3), OSSL_STORE_load_fn(3), OSSL_STORE_eof_fn(3), OSSL_STORE_error_fn(3), OSSL_STORE_close_fn(3)
Types and functions to manipulate, register and unregister STORE loaders for different URI schemes
RAND_load_file(3), RAND_write_file(3), RAND_file_name(3)
PRNG seed file
SSL_CTX_load_verify_locations(3), SSL_CTX_set_default_verify_paths(3), SSL_CTX_set_default_verify_dir(3), SSL_CTX_set_default_verify_file(3)
set default locations for trusted CA certificates
SSL_CTX_set_default_ctlog_list_file(3), SSL_CTX_set_ctlog_list_file(3)
load a Certificate Transparency log list from a file
SSL_CTX_use_certificate(3), SSL_CTX_use_certificate_ASN1(3), SSL_CTX_use_certificate_file(3), SSL_use_certificate(3), SSL_use_certificate_ASN1(3), SSL_use_certificate_file(3), SSL_CTX_use_certificate_chain_file(3), SSL_use_certificate_chain_file(3), SSL_CTX_use_PrivateKey(3), SSL_CTX_use_PrivateKey_ASN1(3), SSL_CTX_use_PrivateKey_file(3), SSL_CTX_use_RSAPrivateKey(3), SSL_CTX_use_RSAPrivateKey_ASN1(3), SSL_CTX_use_RSAPrivateKey_file(3), SSL_use_PrivateKey_file(3), SSL_use_PrivateKey_ASN1(3), SSL_use_PrivateKey(3), SSL_use_RSAPrivateKey(3), SSL_use_RSAPrivateKey_ASN1(3), SSL_use_RSAPrivateKey_file(3), SSL_CTX_check_private_key(3), SSL_check_private_key(3), SSL_CTX_use_cert_and_key(3), SSL_use_cert_and_key(3)
load certificate and key data
SSL_load_client_CA_file(3), SSL_add_file_cert_subjects_to_stack(3), SSL_add_dir_cert_subjects_to_stack(3)
load certificate names
UI_new(3), UI_new_method(3), UI_free(3), UI_add_input_string(3), UI_dup_input_string(3), UI_add_verify_string(3), UI_dup_verify_string(3), UI_add_input_boolean(3), UI_dup_input_boolean(3), UI_add_info_string(3), UI_dup_info_string(3), UI_add_error_string(3), UI_dup_error_string(3), UI_construct_prompt(3), UI_add_user_data(3), UI_get0_user_data(3), UI_get0_result(3), UI_process(3), UI_ctrl(3), UI_set_default_method(3), UI_get_default_method(3), UI_get_method(3), UI_set_method(3), UI_OpenSSL(3), ERR_load_UI_strings(3)
New User Interface
X509_LOOKUP(3), X509_LOOKUP_TYPE(3), X509_LOOKUP_new(3), X509_LOOKUP_free(3), X509_LOOKUP_init(3), X509_LOOKUP_shutdown(3), X509_LOOKUP_set_method_data(3), X509_LOOKUP_get_method_data(3), X509_LOOKUP_ctrl(3), X509_LOOKUP_load_file(3), X509_LOOKUP_add_dir(3), X509_LOOKUP_get_store(3), X509_LOOKUP_by_subject(3), X509_LOOKUP_by_issuer_serial(3), X509_LOOKUP_by_fingerprint(3), X509_LOOKUP_by_alias(3)
OpenSSL certificate lookup mechanisms
X509_LOOKUP_hash_dir(3), X509_LOOKUP_file(3), X509_load_cert_file(3), X509_load_crl_file(3), X509_load_cert_crl_file(3)
Default OpenSSL certificate lookup methods
X509_STORE(3), X509_STORE_add_cert(3), X509_STORE_add_crl(3), X509_STORE_set_depth(3), X509_STORE_set_flags(3), X509_STORE_set_purpose(3), X509_STORE_set_trust(3), X509_STORE_add_lookup(3), X509_STORE_load_locations(3), X509_STORE_set_default_paths(3)
X509_STORE manipulation
openssl-engine(1), engine(1)
load and query engines
ossl_store-file(7)
The store 'file' scheme loader
"glLoadMatrixd(3), glLoadMatrixf(3)
replace the current matrix with the specified matrix
CONF_get1_default_config_file(3ossl), CONF_modules_load_file_ex(3ossl), CONF_modules_load_file(3ossl), CONF_modules_load(3ossl)
OpenSSL configuration functions
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
OpenSSL configuration cleanup functions
CONF_modules_free(3ossl), CONF_modules_finish(3ossl), CONF_modules_unload(3ossl)
OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3)
OpenSSL configuration functions
CRYPTO_THREAD_run_once(3ossl), CRYPTO_THREAD_lock_new(3ossl), CRYPTO_THREAD_read_lock(3ossl), CRYPTO_THREAD_write_lock(3ossl), CRYPTO_THREAD_unlock(3ossl), CRYPTO_THREAD_lock_free(3ossl), CRYPTO_atomic_add(3ossl), CRYPTO_atomic_or(3ossl), CRYPTO_atomic_load(3ossl)
OpenSSL thread support
CTLOG_STORE_new(3), CTLOG_STORE_free(3), CTLOG_STORE_load_default_file(3), CTLOG_STORE_load_file(3)
Create and populate a Certificate Transparency log list
CTLOG_STORE_new_ex(3ossl), CTLOG_STORE_new(3ossl), CTLOG_STORE_free(3ossl), CTLOG_STORE_load_default_file(3ossl), CTLOG_STORE_load_file(3ossl)
Create and populate a Certificate Transparency log list
CURLINFO_CONTENT_LENGTH_DOWNLOAD(3)
get content-length of download
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T(3)
get content-length of download
CURLINFO_CONTENT_LENGTH_UPLOAD(3)
get the specified size of the upload
CURLINFO_CONTENT_LENGTH_UPLOAD_T(3)
get the specified size of the upload
CURLINFO_SIZE_DOWNLOAD(3)
get the number of downloaded bytes
CURLINFO_SIZE_DOWNLOAD_T(3)
get the number of downloaded bytes
CURLINFO_SIZE_UPLOAD(3)
get the number of uploaded bytes
CURLINFO_SIZE_UPLOAD_T(3)
get the number of uploaded bytes
CURLINFO_SPEED_DOWNLOAD(3)
get download speed
CURLINFO_SPEED_DOWNLOAD_T(3)
get download speed
CURLINFO_SPEED_UPLOAD(3)
get upload speed
CURLINFO_SPEED_UPLOAD_T(3)
get upload speed
CURLOPT_ACCEPT_ENCODING(3)
enables automatic decompression of HTTP downloads
CURLOPT_MAXFILESIZE(3)
maximum file size allowed to download
CURLOPT_MAXFILESIZE_LARGE(3)
maximum file size allowed to download
CURLOPT_MAX_RECV_SPEED_LARGE(3)
rate limit data download speed
CURLOPT_MAX_SEND_SPEED_LARGE(3)
rate limit data upload speed
CURLOPT_NOBODY(3)
do the download request without getting the body
CURLOPT_READFUNCTION(3)
read callback for data uploads
CURLOPT_UPLOAD(3)
enable data upload
CURLOPT_UPLOAD_BUFFERSIZE(3)
set preferred upload buffer size
DTLS_get_data_mtu(3)
Get maximum data payload size
DTLS_get_data_mtu(3ossl)
Get maximum data payload size
ENGINE_get_DH(3), ENGINE_get_DSA(3), ENGINE_by_id(3), ENGINE_get_cipher_engine(3), ENGINE_get_default_DH(3), ENGINE_get_default_DSA(3), ENGINE_get_default_RAND(3), ENGINE_get_default_RSA(3), ENGINE_get_digest_engine(3), ENGINE_get_first(3), ENGINE_get_last(3), ENGINE_get_next(3), ENGINE_get_prev(3), ENGINE_new(3), ENGINE_get_ciphers(3), ENGINE_get_ctrl_function(3), ENGINE_get_digests(3), ENGINE_get_destroy_function(3), ENGINE_get_finish_function(3), ENGINE_get_init_function(3), ENGINE_get_load_privkey_function(3), ENGINE_get_load_pubkey_function(3), ENGINE_load_private_key(3), ENGINE_load_public_key(3), ENGINE_get_RAND(3), ENGINE_get_RSA(3), ENGINE_get_id(3), ENGINE_get_name(3), ENGINE_get_cmd_defns(3), ENGINE_get_cipher(3), ENGINE_get_digest(3), ENGINE_add(3), ENGINE_cmd_is_executable(3), ENGINE_ctrl(3), ENGINE_ctrl_cmd(3), ENGINE_ctrl_cmd_string(3), ENGINE_finish(3), ENGINE_free(3), ENGINE_get_flags(3), ENGINE_init(3), ENGINE_register_DH(3), ENGINE_register_DSA(3), ENGINE_register_RAND(3), ENGINE_register_RSA(3), ENGINE_register_all_complete(3), ENGINE_register_ciphers(3), ENGINE_register_complete(3), ENGINE_register_digests(3), ENGINE_remove(3), ENGINE_set_DH(3), ENGINE_set_DSA(3), ENGINE_set_RAND(3), ENGINE_set_RSA(3), ENGINE_set_ciphers(3), ENGINE_set_cmd_defns(3), ENGINE_set_ctrl_function(3), ENGINE_set_default(3), ENGINE_set_default_DH(3), ENGINE_set_default_DSA(3), ENGINE_set_default_RAND(3), ENGINE_set_default_RSA(3), ENGINE_set_default_ciphers(3), ENGINE_set_default_digests(3), ENGINE_set_default_string(3), ENGINE_set_destroy_function(3), ENGINE_set_digests(3), ENGINE_set_finish_function(3), ENGINE_set_flags(3), ENGINE_set_id(3), ENGINE_set_init_function(3), ENGINE_set_load_privkey_function(3), ENGINE_set_load_pubkey_function(3), ENGINE_set_name(3), ENGINE_up_ref(3), ENGINE_get_table_flags(3), ENGINE_cleanup(3), ENGINE_load_builtin_engines(3), ENGINE_register_all_DH(3), ENGINE_register_all_DSA(3), ENGINE_register_all_RAND(3), ENGINE_register_all_RSA(3), ENGINE_register_all_ciphers(3), ENGINE_register_all_digests(3), ENGINE_set_table_flags(3), ENGINE_unregister_DH(3), ENGINE_unregister_DSA(3), ENGINE_unregister_RAND(3), ENGINE_unregister_RSA(3), ENGINE_unregister_ciphers(3), ENGINE_unregister_digests(3)
ENGINE cryptographic module support
ENGINE_get_DH(3ossl), ENGINE_get_DSA(3ossl), ENGINE_by_id(3ossl), ENGINE_get_cipher_engine(3ossl), ENGINE_get_default_DH(3ossl), ENGINE_get_default_DSA(3ossl), ENGINE_get_default_RAND(3ossl), ENGINE_get_default_RSA(3ossl), ENGINE_get_digest_engine(3ossl), ENGINE_get_first(3ossl), ENGINE_get_last(3ossl), ENGINE_get_next(3ossl), ENGINE_get_prev(3ossl), ENGINE_new(3ossl), ENGINE_get_ciphers(3ossl), ENGINE_get_ctrl_function(3ossl), ENGINE_get_digests(3ossl), ENGINE_get_destroy_function(3ossl), ENGINE_get_finish_function(3ossl), ENGINE_get_init_function(3ossl), ENGINE_get_load_privkey_function(3ossl), ENGINE_get_load_pubkey_function(3ossl), ENGINE_load_private_key(3ossl), ENGINE_load_public_key(3ossl), ENGINE_get_RAND(3ossl), ENGINE_get_RSA(3ossl), ENGINE_get_id(3ossl), ENGINE_get_name(3ossl), ENGINE_get_cmd_defns(3ossl), ENGINE_get_cipher(3ossl), ENGINE_get_digest(3ossl), ENGINE_add(3ossl), ENGINE_cmd_is_executable(3ossl), ENGINE_ctrl(3ossl), ENGINE_ctrl_cmd(3ossl), ENGINE_ctrl_cmd_string(3ossl), ENGINE_finish(3ossl), ENGINE_free(3ossl), ENGINE_get_flags(3ossl), ENGINE_init(3ossl), ENGINE_register_DH(3ossl), ENGINE_register_DSA(3ossl), ENGINE_register_RAND(3ossl), ENGINE_register_RSA(3ossl), ENGINE_register_all_complete(3ossl), ENGINE_register_ciphers(3ossl), ENGINE_register_complete(3ossl), ENGINE_register_digests(3ossl), ENGINE_remove(3ossl), ENGINE_set_DH(3ossl), ENGINE_set_DSA(3ossl), ENGINE_set_RAND(3ossl), ENGINE_set_RSA(3ossl), ENGINE_set_ciphers(3ossl), ENGINE_set_cmd_defns(3ossl), ENGINE_set_ctrl_function(3ossl), ENGINE_set_default(3ossl), ENGINE_set_default_DH(3ossl), ENGINE_set_default_DSA(3ossl), ENGINE_set_default_RAND(3ossl), ENGINE_set_default_RSA(3ossl), ENGINE_set_default_ciphers(3ossl), ENGINE_set_default_digests(3ossl), ENGINE_set_default_string(3ossl), ENGINE_set_destroy_function(3ossl), ENGINE_set_digests(3ossl), ENGINE_set_finish_function(3ossl), ENGINE_set_flags(3ossl), ENGINE_set_id(3ossl), ENGINE_set_init_function(3ossl), ENGINE_set_load_privkey_function(3ossl), ENGINE_set_load_pubkey_function(3ossl), ENGINE_set_name(3ossl), ENGINE_up_ref(3ossl), ENGINE_get_table_flags(3ossl), ENGINE_cleanup(3ossl), ENGINE_load_builtin_engines(3ossl), ENGINE_register_all_DH(3ossl), ENGINE_register_all_DSA(3ossl), ENGINE_register_all_RAND(3ossl), ENGINE_register_all_RSA(3ossl), ENGINE_register_all_ciphers(3ossl), ENGINE_register_all_digests(3ossl), ENGINE_set_table_flags(3ossl), ENGINE_unregister_DH(3ossl), ENGINE_unregister_DSA(3ossl), ENGINE_unregister_RAND(3ossl), ENGINE_unregister_RSA(3ossl), ENGINE_unregister_ciphers(3ossl), ENGINE_unregister_digests(3ossl)
ENGINE cryptographic module support
ERR_load_crypto_strings(3), SSL_load_error_strings(3), ERR_free_strings(3)
load and free error strings
ERR_load_crypto_strings(3ossl), SSL_load_error_strings(3ossl), ERR_free_strings(3ossl)
load and free error strings
ERR_load_strings(3), ERR_PACK(3), ERR_get_next_error_library(3)
load arbitrary error strings
ERR_load_strings(3ossl), ERR_PACK(3ossl), ERR_get_next_error_library(3ossl)
load arbitrary error strings
FvwmMFL(1)
the Fvwm3 front-loader module
GENLIB_DEF_PHSC(3)
load a netlist and open a layout model as current figure
GENLIB_LOAD_LOFIG(3)
loads a netlist form disk and opens it as current figure
GENLIB_LOAD_PHFIG(3), PHAD_PHFIG(3)
loads a layout form disk and opens it as current figure
LOAD(7)
load a shared library file
Munin::Node::Configure::PluginList(3)
Loading and listing a collection of plugins
NCONF_new_ex(3ossl), NCONF_new(3ossl), NCONF_free(3ossl), NCONF_default(3ossl), NCONF_load(3ossl), NCONF_get0_libctx(3ossl), NCONF_get_section(3ossl), NCONF_get_section_names(3ossl)
functionality to Load and parse configuration files manually
OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3)
add standard configuration modules
OPENSSL_load_builtin_modules(3ossl), ASN1_add_oid_module(3ossl), ENGINE_add_conf_module(3ossl)
add standard configuration modules
OSSL_LIB_CTX(3ossl), OSSL_LIB_CTX_new(3ossl), OSSL_LIB_CTX_new_from_dispatch(3ossl), OSSL_LIB_CTX_new_child(3ossl), OSSL_LIB_CTX_free(3ossl), OSSL_LIB_CTX_load_config(3ossl), OSSL_LIB_CTX_get0_global_default(3ossl), OSSL_LIB_CTX_set0_default(3ossl)
OpenSSL library context
OSSL_PROVIDER_set_default_search_path(3ossl), OSSL_PROVIDER(3ossl), OSSL_PROVIDER_load(3ossl), OSSL_PROVIDER_try_load(3ossl), OSSL_PROVIDER_unload(3ossl), OSSL_PROVIDER_available(3ossl), OSSL_PROVIDER_do_all(3ossl), OSSL_PROVIDER_gettable_params(3ossl), OSSL_PROVIDER_get_params(3ossl), OSSL_PROVIDER_query_operation(3ossl), OSSL_PROVIDER_unquery_operation(3ossl), OSSL_PROVIDER_get0_provider_ctx(3ossl), OSSL_PROVIDER_get0_dispatch(3ossl), OSSL_PROVIDER_add_builtin(3ossl), OSSL_PROVIDER_get0_name(3ossl), OSSL_PROVIDER_get_capabilities(3ossl), OSSL_PROVIDER_self_test(3ossl)
provider routines
OSSL_STORE_CTX(3), OSSL_STORE_post_process_info_fn(3), OSSL_STORE_open(3), OSSL_STORE_ctrl(3), OSSL_STORE_load(3), OSSL_STORE_eof(3), OSSL_STORE_error(3), OSSL_STORE_close(3)
Types and functions to read objects from a URI
OSSL_STORE_CTX(3ossl), OSSL_STORE_post_process_info_fn(3ossl), OSSL_STORE_open(3ossl), OSSL_STORE_open_ex(3ossl), OSSL_STORE_ctrl(3ossl), OSSL_STORE_load(3ossl), OSSL_STORE_eof(3ossl), OSSL_STORE_error(3ossl), OSSL_STORE_close(3ossl)
Types and functions to read objects from a URI
OSSL_STORE_LOADER(3), OSSL_STORE_LOADER_CTX(3), OSSL_STORE_LOADER_new(3), OSSL_STORE_LOADER_get0_engine(3), OSSL_STORE_LOADER_get0_scheme(3), OSSL_STORE_LOADER_set_open(3), OSSL_STORE_LOADER_set_ctrl(3), OSSL_STORE_LOADER_set_expect(3), OSSL_STORE_LOADER_set_find(3), OSSL_STORE_LOADER_set_load(3), OSSL_STORE_LOADER_set_eof(3), OSSL_STORE_LOADER_set_error(3), OSSL_STORE_LOADER_set_close(3), OSSL_STORE_LOADER_free(3), OSSL_STORE_register_loader(3), OSSL_STORE_unregister_loader(3), OSSL_STORE_open_fn(3), OSSL_STORE_ctrl_fn(3), OSSL_STORE_expect_fn(3), OSSL_STORE_find_fn(3), OSSL_STORE_load_fn(3), OSSL_STORE_eof_fn(3), OSSL_STORE_error_fn(3), OSSL_STORE_close_fn(3)
Types and functions to manipulate, register and unregister STORE loaders for different URI schemes
OSSL_STORE_LOADER(3ossl), OSSL_STORE_LOADER_fetch(3ossl), OSSL_STORE_LOADER_up_ref(3ossl), OSSL_STORE_LOADER_free(3ossl), OSSL_STORE_LOADER_get0_provider(3ossl), OSSL_STORE_LOADER_get0_properties(3ossl), OSSL_STORE_LOADER_is_a(3ossl), OSSL_STORE_LOADER_get0_description(3ossl), OSSL_STORE_LOADER_do_all_provided(3ossl), OSSL_STORE_LOADER_names_do_all(3ossl), OSSL_STORE_LOADER_CTX(3ossl), OSSL_STORE_LOADER_new(3ossl), OSSL_STORE_LOADER_get0_engine(3ossl), OSSL_STORE_LOADER_get0_scheme(3ossl), OSSL_STORE_LOADER_set_open(3ossl), OSSL_STORE_LOADER_set_open_ex(3ossl), OSSL_STORE_LOADER_set_attach(3ossl), OSSL_STORE_LOADER_set_ctrl(3ossl), OSSL_STORE_LOADER_set_expect(3ossl), OSSL_STORE_LOADER_set_find(3ossl), OSSL_STORE_LOADER_set_load(3ossl), OSSL_STORE_LOADER_set_eof(3ossl), OSSL_STORE_LOADER_set_error(3ossl), OSSL_STORE_LOADER_set_close(3ossl), OSSL_STORE_register_loader(3ossl), OSSL_STORE_unregister_loader(3ossl), OSSL_STORE_open_fn(3ossl), OSSL_STORE_open_ex_fn(3ossl), OSSL_STORE_attach_fn(3ossl), OSSL_STORE_ctrl_fn(3ossl), OSSL_STORE_expect_fn(3ossl), OSSL_STORE_find_fn(3ossl), OSSL_STORE_load_fn(3ossl), OSSL_STORE_eof_fn(3ossl), OSSL_STORE_error_fn(3ossl), OSSL_STORE_close_fn(3ossl)
Types and functions to manipulate, register and unregister STORE loaders for different URI schemes
PS_findfont(3)
Loads a font
RAND_load_file(3), RAND_write_file(3), RAND_file_name(3)
PRNG seed file
RAND_load_file(3ossl), RAND_write_file(3ossl), RAND_file_name(3ossl)
PRNG seed file
SDL_GL_LoadLibrary(3)
Specify an OpenGL library
SDL_LoadBMP(3)
Load a Windows BMP file into an SDL_Surface
SDL_LoadWAV(3)
Load a WAVE file
SDLmm_todo(3), todo(3)
Todo List "Class SDLmm::SRect " 1c Extend the class with useful utility functions in regards to rectangles like intersections. "Class SDLmm::Surface " 1c Implement a better constructor scheme, where the first argument is a dummy class which specified what to do. This would allow a construct where a surface can be loaded from an image file without first having to create an unitialized object. "Class SDLmm::VideoInfo " 1c Build a status function allowing for easier access to the flags. This can be done using a bitfield which would allow for checking for multiple features at once
SSL_CTX_load_verify_dir(3ossl), SSL_CTX_load_verify_file(3ossl), SSL_CTX_load_verify_store(3ossl), SSL_CTX_set_default_verify_paths(3ossl), SSL_CTX_set_default_verify_dir(3ossl), SSL_CTX_set_default_verify_file(3ossl), SSL_CTX_set_default_verify_store(3ossl), SSL_CTX_load_verify_locations(3ossl)
set default locations for trusted CA certificates
SSL_CTX_load_verify_locations(3), SSL_CTX_set_default_verify_paths(3), SSL_CTX_set_default_verify_dir(3), SSL_CTX_set_default_verify_file(3)
set default locations for trusted CA certificates
SSL_CTX_set_default_ctlog_list_file(3), SSL_CTX_set_ctlog_list_file(3)
load a Certificate Transparency log list from a file
SSL_CTX_set_default_ctlog_list_file(3ossl), SSL_CTX_set_ctlog_list_file(3ossl)
load a Certificate Transparency log list from a file
SSL_CTX_use_certificate(3), SSL_CTX_use_certificate_ASN1(3), SSL_CTX_use_certificate_file(3), SSL_use_certificate(3), SSL_use_certificate_ASN1(3), SSL_use_certificate_file(3), SSL_CTX_use_certificate_chain_file(3), SSL_use_certificate_chain_file(3), SSL_CTX_use_PrivateKey(3), SSL_CTX_use_PrivateKey_ASN1(3), SSL_CTX_use_PrivateKey_file(3), SSL_CTX_use_RSAPrivateKey(3), SSL_CTX_use_RSAPrivateKey_ASN1(3), SSL_CTX_use_RSAPrivateKey_file(3), SSL_use_PrivateKey_file(3), SSL_use_PrivateKey_ASN1(3), SSL_use_PrivateKey(3), SSL_use_RSAPrivateKey(3), SSL_use_RSAPrivateKey_ASN1(3), SSL_use_RSAPrivateKey_file(3), SSL_CTX_check_private_key(3), SSL_check_private_key(3), SSL_CTX_use_cert_and_key(3), SSL_use_cert_and_key(3)
load certificate and key data
SSL_CTX_use_certificate(3ossl), SSL_CTX_use_certificate_ASN1(3ossl), SSL_CTX_use_certificate_file(3ossl), SSL_use_certificate(3ossl), SSL_use_certificate_ASN1(3ossl), SSL_use_certificate_file(3ossl), SSL_CTX_use_certificate_chain_file(3ossl), SSL_use_certificate_chain_file(3ossl), SSL_CTX_use_PrivateKey(3ossl), SSL_CTX_use_PrivateKey_ASN1(3ossl), SSL_CTX_use_PrivateKey_file(3ossl), SSL_CTX_use_RSAPrivateKey(3ossl), SSL_CTX_use_RSAPrivateKey_ASN1(3ossl), SSL_CTX_use_RSAPrivateKey_file(3ossl), SSL_use_PrivateKey_file(3ossl), SSL_use_PrivateKey_ASN1(3ossl), SSL_use_PrivateKey(3ossl), SSL_use_RSAPrivateKey(3ossl), SSL_use_RSAPrivateKey_ASN1(3ossl), SSL_use_RSAPrivateKey_file(3ossl), SSL_CTX_check_private_key(3ossl), SSL_check_private_key(3ossl), SSL_CTX_use_cert_and_key(3ossl), SSL_use_cert_and_key(3ossl)
load certificate and key data
SSL_load_client_CA_file(3), SSL_add_file_cert_subjects_to_stack(3), SSL_add_dir_cert_subjects_to_stack(3)
load certificate names
SSL_load_client_CA_file_ex(3ossl), SSL_load_client_CA_file(3ossl), SSL_add_file_cert_subjects_to_stack(3ossl), SSL_add_dir_cert_subjects_to_stack(3ossl), SSL_add_store_cert_subjects_to_stack(3ossl)
load certificate names
Tcl_AllocStatBuf.tcl85(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_FindSymbol.tcl86(3), Tcl_LoadFile(3), Tcl_FindSymbol(3)
platform-independent dynamic library loading
Tcl_FindSymbol.tcl87(3), Tcl_LoadFile(3), Tcl_FindSymbol(3)
platform-independent dynamic library loading
Tcl_StaticLibrary.tcl87(3), Tcl_StaticLibrary(3), Tcl_StaticPackage(3)
make a statically linked library available via the 'load' command
Tcl_StaticPackage.tcl85(3), Tcl_StaticPackage(3)
make a statically linked package available via the 'load' command
Tcl_StaticPackage.tcl86(3), Tcl_StaticPackage(3)
make a statically linked package available via the 'load' command
Tspi_Context_LoadKeyByBlob(3)
load a key into the TPM using the key's blob
Tspi_Context_LoadKeyByUUID(3)
load a key that's been registered in persistent storage
Tspi_Key_LoadKey(3)
load a key into the TPM
Tspi_Key_UnloadKey(3)
unload a key from the TPM
Tspi_TPM_LoadMaintenancePubKey(3), Tspi_TPM_LoadMaintenancePubKey-(3)
load the public maintenance key into the TPM
X509_LOOKUP(3), X509_LOOKUP_TYPE(3), X509_LOOKUP_new(3), X509_LOOKUP_free(3), X509_LOOKUP_init(3), X509_LOOKUP_shutdown(3), X509_LOOKUP_set_method_data(3), X509_LOOKUP_get_method_data(3), X509_LOOKUP_ctrl(3), X509_LOOKUP_load_file(3), X509_LOOKUP_add_dir(3), X509_LOOKUP_get_store(3), X509_LOOKUP_by_subject(3), X509_LOOKUP_by_issuer_serial(3), X509_LOOKUP_by_fingerprint(3), X509_LOOKUP_by_alias(3)
OpenSSL certificate lookup mechanisms
X509_LOOKUP(3ossl), X509_LOOKUP_TYPE(3ossl), X509_LOOKUP_new(3ossl), X509_LOOKUP_free(3ossl), X509_LOOKUP_init(3ossl), X509_LOOKUP_shutdown(3ossl), X509_LOOKUP_set_method_data(3ossl), X509_LOOKUP_get_method_data(3ossl), X509_LOOKUP_ctrl_ex(3ossl), X509_LOOKUP_ctrl(3ossl), X509_LOOKUP_load_file_ex(3ossl), X509_LOOKUP_load_file(3ossl), X509_LOOKUP_add_dir(3ossl), X509_LOOKUP_add_store_ex(3ossl), X509_LOOKUP_add_store(3ossl), X509_LOOKUP_load_store_ex(3ossl), X509_LOOKUP_load_store(3ossl), X509_LOOKUP_get_store(3ossl), X509_LOOKUP_by_subject_ex(3ossl), X509_LOOKUP_by_subject(3ossl), X509_LOOKUP_by_issuer_serial(3ossl), X509_LOOKUP_by_fingerprint(3ossl), X509_LOOKUP_by_alias(3ossl)
OpenSSL certificate lookup mechanisms
X509_LOOKUP_hash_dir(3), X509_LOOKUP_file(3), X509_load_cert_file(3), X509_load_crl_file(3), X509_load_cert_crl_file(3)
Default OpenSSL certificate lookup methods
X509_LOOKUP_hash_dir(3ossl), X509_LOOKUP_file(3ossl), X509_LOOKUP_store(3ossl), X509_load_cert_file_ex(3ossl), X509_load_cert_file(3ossl), X509_load_crl_file(3ossl), X509_load_cert_crl_file_ex(3ossl), X509_load_cert_crl_file(3ossl)
Default OpenSSL certificate lookup methods
X509_STORE(3), X509_STORE_add_cert(3), X509_STORE_add_crl(3), X509_STORE_set_depth(3), X509_STORE_set_flags(3), X509_STORE_set_purpose(3), X509_STORE_set_trust(3), X509_STORE_add_lookup(3), X509_STORE_load_locations(3), X509_STORE_set_default_paths(3)
X509_STORE manipulation
X509_STORE(3ossl), X509_STORE_add_cert(3ossl), X509_STORE_add_crl(3ossl), X509_STORE_set_depth(3ossl), X509_STORE_set_flags(3ossl), X509_STORE_set_purpose(3ossl), X509_STORE_set_trust(3ossl), X509_STORE_add_lookup(3ossl), X509_STORE_load_file_ex(3ossl), X509_STORE_load_file(3ossl), X509_STORE_load_path(3ossl), X509_STORE_load_store_ex(3ossl), X509_STORE_load_store(3ossl), X509_STORE_set_default_paths_ex(3ossl), X509_STORE_set_default_paths(3ossl), X509_STORE_load_locations_ex(3ossl), X509_STORE_load_locations(3ossl)
X509_STORE manipulation
X509_load_http(3ossl), X509_http_nbio(3ossl), X509_CRL_load_http(3ossl), X509_CRL_http_nbio(3ossl)
certificate and CRL loading functions
XLoadFont(3), XQueryFont(3), XLoadQueryFont(3), XFreeFont(3), XGetFontProperty(3), XUnloadFont(3), XCharStruct(3), XFontProp(3), XChar2b(3), XFontStruct(3)
load or unload fonts and font metric structures
XkbGetGeometry(3)
Loads a keyboard geometry if you already have the keyboard description
XkbGetNamedGeometry(3)
Loads a keyboard geometry description from this database by name
XkbSetIndicatorMap(3)
Downloads the changes to the server based on modifications to a local copy of the keyboard description which will update the maps for one or more indicators
XmFontListEntryLoad(3)
A font list function that loads a font or creates a font set and creates an accompanying font list entry "XmFontListEntryLoad" "font list functions" "XmFontListEntryLoad"
XmtLoadResourceFile(3), XmtLoadResourceFile()(3), XmtLoadResourceFileList()(3)
find named resource files and read them into the resource database
XtPopup(3), XtPopupSpringLoaded(3), XtCallbackNone(3), XtCallbackNonexclusive(3), XtCallbackExclusive(3)
map a pop-up
activateCDKSwindow(3), activateCDKSwindow addCDKSwindow cleanCDKSwindow destroyCDKSwindow drawCDKSwindow dumpCDKSwindow eraseCDKSwindow execCDKSwindow getCDKSwindowBox getCDKSwindowContents injectCDKSwindow jumpToLineCDKSwindow loadCDKSwindowInformation moveCDKSwindow newCDKSwindow positionCDKSwindow saveCDKSwindowInformation setCDKSwindow setCDKSwindowBackgroundAttrib setCDKSwindowBackgroundColor setCDKSwindowBox setCDKSwindowBoxAttribute setCDKSwindowContents setCDKSwindowHorizontalChar setCDKSwindowLLChar setCDKSwindowLRChar setCDKSwindowPostProcess setCDKSwindowPreProcess setCDKSwindowULChar setCDKSwindowURChar setCDKSwindowVerticalChar trimCDKSwindow cdk_swindow(3)
a curses scrolling window widget
add_3dmesh(3), add_3dmesh (3)
Load/build a mesh and attach to a model
aget(1)
A multithreaded HTTP download accelerator
al_load_audio_stream(3)
Allegro 5 API
al_load_audio_stream_f(3)
Allegro 5 API
al_load_bitmap(3)
Allegro 5 API
al_load_bitmap_f(3)
Allegro 5 API
al_load_bitmap_flags(3)
Allegro 5 API
al_load_bitmap_flags_f(3)
Allegro 5 API
al_load_bitmap_font(3)
Allegro 5 API
al_load_bitmap_font_flags(3)
Allegro 5 API
al_load_config_file(3)
Allegro 5 API
al_load_config_file_f(3)
Allegro 5 API
al_load_font(3)
Allegro 5 API
al_load_sample(3)
Allegro 5 API
al_load_sample_f(3)
Allegro 5 API
al_load_ttf_font(3)
Allegro 5 API
al_load_ttf_font_f(3)
Allegro 5 API
al_load_ttf_font_stretch(3)
Allegro 5 API
al_load_ttf_font_stretch_f(3)
Allegro 5 API
al_register_audio_stream_loader(3)
Allegro 5 API
al_register_audio_stream_loader_f(3)
Allegro 5 API
al_register_bitmap_loader(3)
Allegro 5 API
al_register_bitmap_loader_f(3)
Allegro 5 API
al_register_font_loader(3)
Allegro 5 API
al_register_sample_loader(3)
Allegro 5 API
al_register_sample_loader_f(3)
Allegro 5 API
al_upload_and_play_haptic_effect(3)
Allegro 5 API
al_upload_haptic_effect(3)
Allegro 5 API
aloadimage(1)
Trivial image viewer for Arcan servers
ansilove_loadfile(3)
Load a file from disk
apt-cacher-ng(8)
caching proxy for software package downloads
aria2c(1)
The ultra fast download utility rst2man-indent-level 0 1 rstReportMargin \$1
ascii-xfr(1)
upload/download files using the ASCII protocol
ascpu(1)
the AfterStep CPU load monitor
astquery(1), query(1)
query remote data servers and download
auto_execok.tcl85(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_mkindex_old(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
auto_execok.tcl86(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
auto_execok.tcl87(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), tcl_findLibrary(n), parray(n), tcl_endOfWord(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n)
standard library of Tcl procedures
axel(1), Axel(1)
A light download accelerator for Linux
balance(1), balance 3.54(1)
A simple TCP proxy with load balancing and failover mechanisms
bluegps(1)
datalog download tool for Royaltek RBT-3000 GPS
bogoutil(1)
Dumps, loads, and maintains bogofilter database files
boobill(1)
get/download documents and bills
btcheck(1)
Bittorrent downloaded data checker
castget(1)
download RSS enclosures
catdic(1)
Download a dictionary
ceph-syn(8)
ceph synthetic workload generator
cg(1)
semi-automatic newsgroup binary downloader
cgi_filehandle(3), cgi_filehandle (3)
return a file pointer to an uploaded file
chicken-install5(1), chicken-install(1)
download and install extension libraries for CHICKEN Scheme
ck_hs_get(3)
load a key from a hash set
ck_ht_get_spmc(3)
load a key-value pair from a hash table
ck_pr_fence_atomic_load(3)
enforce ordering of atomic read-modify-write operations to load operations
ck_pr_fence_load(3)
enforce partial ordering of load operations
ck_pr_fence_load_atomic(3)
enforce ordering of load operations to atomic read-modify-write operations
ck_pr_fence_load_depends(3)
data dependency barrier
ck_pr_fence_load_store(3)
enforce ordering of load operations to store operations
ck_pr_fence_store_atomic(3)
enforce ordering of store operations to load operations
ck_pr_fence_store_load(3)
enforce ordering of store operations to load operations
ck_pr_load(3), ck_pr_load_ptr(3), ck_pr_load_double(3), ck_pr_load_uint(3), ck_pr_load_int(3), ck_pr_load_char(3), ck_pr_load_64(3), ck_pr_load_32(3), ck_pr_load_16(3), ck_pr_load_8(3)
atomic volatile load operations
ck_rhs_get(3)
load a key from a hash set
clamav-unofficial-sigs(8)
Download, test, and install third-party ClamAV signature databases
configFileLoad(3)
parse a configuration file
cook_rsh(1)
load balancing rsh "cook_rsh(1)" "load balancing rsh"
crlupdate(1)
Mono Certficate Revocation List Downloader and Updater
cs_register_fileload(3), cs_register_fileload (3)
register a fileload function
csocks(1)
Script that LD_PRELOAD a socks v4/v5 library for socksify applications
cxCleanupModules(3)
Unloads all modules
cxLoadModule(3)
Loads the module of the specified name and type
cxUnloadModule(3)
Unloads the specified module
davix-get(1)
Download tool based on libdavix
davix-put(1)
Upload tool based on libdavix
dbh_load(3), dbh_load_address(3), dbh_load_parent(3), dbh_load_child(3)
load a DBHashTable record to memory
didump(8)
Diablo program to dump the dhistory database diload - Diablo program to append to the dhistory database
diloadfromspool(8)
Diablo program to regenerate dhistory database from spool
dlsdump(1)
List information about a DLS (Downloadable Sound) file
dnsdist(1)
A DNS and DoS aware, scriptable loadbalancer
drmAvailable(3)
determine whether a DRM kernel driver has been loaded
dsbdriverd(8)
A device driver loading daemon
dune-utop(1), duneN'45'utop(1)
N'45' Load library in utop
dynload(3)
encapsulates dynamic loading mechanisms and gives access to functions in foreign dynamic libraries and code modules
elpa_autotune_load_state(3)
loadsa state of an ELPA autotuning object
elpa_load_settings(3)
loads the setting of an elpa object
exbitmap(3)
Loading and displaying PCX and BMP files. Allegro game programming library
exfont(3)
Loading and manipulating fonts. Allegro game programming library
exscale(3)
Loading PCX files and bitmap stretching. Allegro game programming library
extipl(8)
a partition-selectable boot loader/installer for IBM-PC compatible computers
exxfade(3)
Truecolor image loading and fades. Allegro game programming library
fastnetmon(1), FastNetMon(1)
a high performance DoS/DDoS load analyzer built on top of multiple packet capture engines
flowrate(3)
SiLK plug-in providing payload and rate filters and fields
foomatic-kitload(8)
installs a data kit into the foomatic database
fppkg(1)
The Free Pascal Packages Download program
freebcp(1)
bulk loading utility for Sybase and Microsoft databases
fxload(8)
Firmware download to EZ-USB devices
galleroob(1)
browse and download web image galleries
gdbm_load(1)
re-create a GDBM database from a dump file
gdk-pixbuf-query-loaders(1)
GdkPixbuf loader registration utility
gh-release-download(1)
Download release assets
gh-release-upload(1)
Upload assets to a release
gh-run-download(1)
Download artifacts generated by a workflow run
git-fetch(1)
Download objects and refs from another repository
git-http-fetch(1)
Download from a remote Git repository via HTTP
git-lfs-fetch(1)
Download all Git LFS files for a given ref
git-lfs-pull(1)
Download all Git LFS files for current ref & checkout
git-upload-archive(1)
Send archive back to git-archive
git-upload-pack(1)
Send objects packed back to git-fetch-pack
glAreTexturesResident(3), "glAreTexturesResident(3)
determine if textures are loaded in texture memory
glLoadIdentity(3), "glLoadIdentity(3)
replace the current matrix with the identity matrix
glLoadName(3), "glLoadName(3)
load a name onto the name stack
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
allow the user to compose an input line
gluLoadSamplingMatrices(3), "gluLoadSamplingMatrices(3)
load NURBS sampling and culling matrices
gnutls_load_file(3)
API function
gst-load(1)
test and load packages into a GNU Smalltalk image
h2load(1)
HTTP/2 benchmarking tool rst2man-indent-level 0 1 rstReportMargin \$1
haproxy(1), HAProxy(1)
fast and reliable http reverse proxy and load balancer
hdf_register_fileload(3), hdf_register_fileload (3)
register a fileload function
hlmaster.list(1), "hlmaster.list" "(1)
How to load your own list of gameservers."
htable(3), HTABLE_HEAD(3)
HTABLE_ENTRY, HTABLE_SIZE, HTABLE_COUNT, HTABLE_EMPTY, HTABLE_COLLS, HTABLE_LOAD, HTABLE_INITIALIZER, HTABLE_INIT, HTABLE_PROTOTYPE, HTABLE_GENERATE, HTABLE_INSERT, HTABLE_REMOVE, HTABLE_LOOKUP, HTABLE_FIRST, HTABLE_NEXT, HTABLE_FOREACH, implementation of hash tables
htdb_load(1)
displays statistics for Berkeley DB environments
htload(1)
reads in an ASCII-text version of the document database
http_load(1)
multiprocessing http test client
hwlocality_tinker(3)
Modifying a loaded Topology
hxnetload(8), netload(8)
show utilization of network interface
icedtea-web(1)
provides a Free Software web browser plugin running applets written in the Java programming language and an implementation of Java Web Start, originally based on the NetX project. NetX allows Java applets and applications to be downloaded over the network, cached, and (by default) run in a secure sandbox environment. Subsequent runs of the applet download the latest version automatically. Update and security settings, among others, can be set using the itw-settings command. icedtea-web also includes a plugin to enable Java applets (http://www.java.com/en/download/testjava.jsp) within web browsers. Names and email addresses of contributors to this project can be found in the file AUTHORS in the IcedTea-Web root directory. The full GPLv2 license of this project can be found in the file COPYING in the IcedTea-Web root directory. News about releases of this project can be found in the file NEWS in the IcedTea-Web root directory
image_loaded(3), image_loaded (3)
Query the status of an asynchronous video object source
image_pushasynch(3), image_pushasynch (3)
Blocks on an asynchronous load operation until it has completed
iorate(1)
tests I/O subsystems under various loads
jack_load(1)
JACK toolkit client for loading in-process clients
jack_load_test(1)
JACK toolkit client which occupies the cpu for some time in process
jack_unload(1)
The JACK Audio Connection Kit example client
jigdo-file(1)
Prepare files for Jigsaw Download (distribution of huge files, e.g. CD images)
jigdo-lite(1)
Download jigdo files using wget
jose-jws-sig(1)
Signs a payload using one or more JWKs
kiconvtool(8)
load kernel iconv charset tables
ktcheck(1)
verify and download command file and transcripts
kyua-config(1), kyua config(1)
Inspects the values of the loaded configuration
lcreate(1)
upload transcripts and their corresponding files
libOpenCL(7), libOpenCL.so(7)
OCL-ICD implementation of OpenCL ICD loader
libmagic(3), magic_open(3), magic_close(3), magic_error(3), magic_errno(3), magic_descriptor(3), magic_buffer(3), magic_getflags(3), magic_setflags(3), magic_check(3), magic_compile(3), magic_list(3), magic_load(3), magic_load_buffers(3), magic_setparam(3), magic_getparam(3), magic_version(3)
Magic number recognition library
load.tcl85(n), load(n)
Load machine code and initialize new commands
load.tcl86(n), load(n)
Load machine code and initialize new commands
load.tcl87(n), load(n)
Load machine code and initialize new commands
loadTk.tk85(n), loadTk(n)
Load Tk into a safe interpreter
load_asample(3), load_asample (3)
Preload an audio sample for later/repeated playback
load_bios_font(3)
Loads a 8x8 or 8x16 BIOS format font. Allegro game programming library
load_bitmap(3)
Loads any supported bitmap from a file. Allegro game programming library
load_bitmap_font(3)
Grabs a font from a bitmap file. Allegro game programming library
load_bmp(3)
Loads a BMP bitmap from a file. Allegro game programming library
load_bmp_pf(3)
Packfile version of load_bmp. Allegro game programming library
load_dat_font(3)
Loads a FONT from an Allegro datafile
load_datafile(3)
Loads a datafile into memory. Allegro game programming library
load_datafile_callback(3)
Loads a datafile into memory, calling a hook per object. Allegro game programming library
load_datafile_object(3)
Loads a specific object from a datafile. Allegro game programming library
load_datafile_object_indexed(3)
Loads a single object from a datafile index. Allegro game programming library
load_font(3)
Loads a font from a file. Allegro game programming library
load_grx_font(3)
Loads a GRX format font. Allegro game programming library
load_grx_or_bios_font(3)
Loads either a BIOS or GRX format font. Allegro game programming library
load_ibk(3)
Reads in a .IBK patch definition file for the Adlib driver. Allegro game programming library
load_image(3), load_image (3)
synchronously load supported images
load_image_asynch(3), load_image_asynch (3)
asynchronously load an image from a resource
load_joystick_data(3)
Loads joystick calibration data. Allegro game programming library
load_lbm(3)
Loads an LBM bitmap from a file. Allegro game programming library
load_midi(3)
Loads a MIDI file. Allegro game programming library
load_midi_patches(3)
Forces the MIDI driver to load a set of patches. Allegro game programming library
load_pcx(3)
Loads a PCX bitmap from a file. Allegro game programming library
load_pcx_pf(3)
Packfile version of load_pcx. Allegro game programming library
load_sample(3)
Loads a sample from a file. Allegro game programming library
load_tga(3)
Loads a TGA bitmap from a file. Allegro game programming library
load_tga_pf(3)
Packfile version of load_tga. Allegro game programming library
load_txt_font(3)
Loads a font script. Allegro game programming library
load_voc(3)
Loads a sample from a Creative Labs VOC file. Allegro game programming library
load_voc_pf(3)
Packfile version of load_voc. Allegro game programming library
load_wav(3)
Loads a sample from a RIFF WAV file. Allegro game programming library
load_wav_pf(3)
Packfile version of load_wav. Allegro game programming library
loaderinfo(1)
report SCSI tape device info
loaderupdate(8)
update boot loaders
loadlofig(3)
load a new logical cell model from disk man1/alc_origin.1
loadphfig(3)
load a new physical cell model from disk man1/alc_origin.1
loadplay(1)
CPU load player
loadrdsfig(3)
give back a pointer to a figure man1/alc_origin.1
loadrdsparam(3)
load parameters from symbolic to real conversion. man1/alc_origin.1
loadrec(1)
CPU load recorder
mate-multiload-applet(1)
Multiload (cpu, load average, memory, net, swap) applet for the MATE panel
mdatabase_load(3m17n)
Load a data from the database
mdb_load(1)
LMDB environment import tool
mdbx_load(1)
MDBX environment import tool
megacopy(1)
Upload/download entire directories to/from your Mega.nz account
megadl(1)
download exported files and directories from Mega.nz
megaget(1)
download files from your Mega.nz account
megaput(1)
upload files to your Mega.nz account
mifluzload(1)
load the content of an inverted index
mixal(1)
a load-and-go MIX assembler
mkoctfile(1)
Compile dynamic-load modules for GNU Octave
mmsclient(1)
download Microsoft Media streams
mopd(8)
MOP Loader Daemon
mozroots(1)
Download and import trusted root certificates from Mozilla's LXR into Mono's certificate store
msdl(1)
Media Stream DownLoader
mysql_tzinfo_to_sql(1)
load the time zone tables
mysqlslap(1)
load emulation client
niceload(1)
slow down a program when the load average is above a certain limit
nload(1)
displays the current network usage
nuster(1), HAProxy(1)
fast and reliable http reverse proxy and load balancer
ocf_heartbeat_azure-lb(7)
Answers Azure Load Balancer health probe requests
ocf_heartbeat_fio(7)
fio IO load generator
openssl-engine(1), engine(1)
load and query engines
openssl-engine(1ossl)
load and query engines
optionFileLoad(3)
Load the locatable config files, in order
optionLoadLine(3)
process a string for an option name and value
optionUnloadNested(3)
Deallocate the memory for a nested value
ossl_store-file(7)
The store 'file' scheme loader
ossl_store-file(7ossl)
The store 'file' scheme loader
ovs-kmod-ctl(8)
OVS startup helper script for loading kernel modules
package.tcl85(n), package(n)
Facilities for package loading and version control
package.tcl86(n), package(n)
Facilities for package loading and version control
package.tcl87(n), package(n)
Facilities for package loading and version control
pam_wrapper(1)
A preloadable wrapper to test PAM applications and PAM Modules
pen(1)
Load balancer for udp and tcp based protocols
penctl(1)
control a running pen load balancer
pfsinpfm(1)
Load images or frames in PFM format
pfsinrgbe(1)
Load images or frames in Radiance RGBE format
pfsintiff(1)
Load images or frames in several variants of TIFF format (both LDR and HDR)
pkgMkIndex.tcl86(n), pkg_mkIndex(n)
Build an index for automatic loading of packages
pkgMkIndex.tcl87(n), pkg_mkIndex(n)
Build an index for automatic loading of packages
pkg_mkIndex.tcl85(n), pkg_mkIndex(n)
Build an index for automatic loading of packages
pload(1)
display network interface statistics in an X window
pluginviewer(8)
list loadable SASL plugins and their properties
pm3umpdl(1)
Loads a pls file into mpd, musicpd
polygraph-pop-test(1)
predicts cache hit ratios for a given workload
pound(8)
HTTP/HTTPS reverse-proxy and load-balancer
projsync(1)
Downloading tool of resource files rst2man-indent-level 0 1 rstReportMargin \$1
pst2dii(1)
extract email messages from an MS Outlook .pst file in DII load format
puf(1)
http client for parallel downloading
pure-uploadscript(8)
Automatically run an external program after a successful upload
qnapi(1)
a tool for downloading subtitles for movies
quvi-modules-3rdparty09(7), quvi-modules-3rdparty(7)
Overview of the loadable 3rd party modules
quvi-modules09(7), quvi-modules(7)
Overview of the loadable quvi modules
rapid-photo-downloader(1)
Downloads, renames and backs up photos and videos from cameras, phones, memory cards and other devices
rbd-replay(8)
replay rados block device (RBD) workloads
rbd-replay-many(8)
replay a rados block device (RBD) workload on several clients
rbd-replay-prep(8)
prepare captured rados block device (RBD) workloads for replay
register_bitmap_file_type(3)
Registers custom bitmap loading/saving functions. Allegro game programming library
register_datafile_object(3)
Registers load/destroy functions for custom object types. Allegro game programming library
register_font_file_type(3)
Register a new font loading function. Allegro game programming library
register_sample_file_type(3)
Registers custom loading/saving sample routines. Allegro game programming library
reload_config_texts(3)
Reloads translated strings returned by get_config_text(). Allegro game programming library
rleldmap(1)
Load a new color map into an RLE file
rpload(1)
alpine remote data utility
safe_loadTk.tk86(n), safe::loadTk(n)
Load Tk into a safe interpreter
sane-dll(5)
SANE dynamic backend loader
set_color_conversion(3)
Tells Allegro how to convert images during loading time
setstyle(1)
set style related options for Window Maker or loads a theme
sg_get_load_stats(3), sg_get_load_stats_r(3), sg_free_load_stats(3)
get system load
sg_start(8)
send SCSI START STOP UNIT command: start, stop, load or eject medium
shtk_config_load(3)
Loads a configuration file
shtk_import(3)
Loads an shtk module
siege(1)
is a HTTP/FTP load tester and benchmarking utility
slurm(1), Slurm(1)
Slurm Workload Manager overview
slurm_free_ctl_conf(3), slurm_load_ctl_conf(3), slurm_print_ctl_conf(3)
Slurm information reporting functions
slurm_free_front_end_info_msg(3), slurm_load_front_end(3), slurm_print_front_end_info_msg(3), slurm_print_front_end_table(3), slurm_sprint_front_end_table(3)
Slurm front end node information reporting functions
slurm_free_node_info_msg(3), slurm_load_node(3), slurm_load_node_single(3), slurm_print_node_info_msg(3), slurm_print_node_table(3), slurm_sprint_node_table(3)
Slurm node information reporting functions
slurm_free_partition_info_msg(3), slurm_load_partitions(3), slurm_print_partition_info(3), slurm_print_partition_info_msg(3)
Slurm partition information reporting functions
slurm_free_slurmd_status(3), slurm_load_slurmd_status(3), slurm_print_slurmd_status(3)
Slurmd status functions
slurm_get_end_time(3), slurm_get_rem_time(3), slurm_job_cpus_allocated_on_node(3), slurm_job_cpus_allocated_on_node_id(3), slurm_job_cpus_allocated_str_on_node(3), slurm_job_cpus_allocated_str_on_node_id(3), slurm_load_jobs(3), slurm_load_job_user(3), slurm_pid2jobid(3), slurm_print_job_info(3), slurm_print_job_info_msg(3)
Slurm job information reporting functions ISLURM_GET_REM_TIME, ISLURM_GET_REM_TIME2 - Fortran callable extensions
slurm_load_reservations(3), slurm_free_reservation_info_msg(3), slurm_print_reservation_info(3), slurm_sprint_reservation_info(3), slurm_print_reservation_info_msg(3)
Slurm reservation information reporting functions
smbget(1)
wget-like utility for download files over SMB
smi_config(3), smiInit(3), smiExit(3), smiSetErrorLevel(3), smiGetFlags(3), smiSetFlags(3), smiLoadModule(3), smiGetPath(3), smiSetPath(3), smiReadConfig(3)
SMI library configuration routines
snobol4load(3)
Loading extension modules into SNOBOL4
snobol4setup(3)
SNOBOL4 Loadable module setup utility
spamd-setup(8)
parse and load file of spammer addresses
srec_cat(1)
manipulate EPROM load files require_index { }
srec_cmp(1)
compare two EPROM load files for equality require_index { }
srec_fastload(5)
LSI Logic Fast Load file format require_index { }
srec_info(1)
information about EPROM load files require_index { }
srec_logisim(5)
format Logisim EPROM load files require_index { }
srec_os65v(5)
OS65V Loader file format require_index { }
srecord(3)
library to manipulate EPROM load files
sslswamp(1), swamp(1)
SSL/TLS load-tester based on OpenSSL
stress(1)
tool to impose load on and stress test systems
stress-ng(1)
a tool to load and stress a computer system
stunnel(8)
TLS offloading and load-balancing proxy
suboob(1)
search and download subtitles
svnrdump(1)
Subversion remote repository dumper and loader
switch_default_scalemode(3), switch_default_scalemode (3)
Change the default scale-mode for newly loaded images
syslinux(1)
install the SYSLINUX+1 bootloader on a FAT filesystem
system_load(3), system_load (3)
Load and parse additional scripts or modules
tcpkali(1)
-- fast TCP and WebSocket load generator and sink
tifffastcrop(1)
extracts (crops) a rectangular region from a tiff file, avoiding loading the full source image input.tif into memory
tls_load_file(3), tls_unload_file(3), tls_config_set_ca_file(3), tls_config_set_ca_path(3), tls_config_set_ca_mem(3), tls_config_set_cert_file(3), tls_config_set_cert_mem(3), tls_config_set_crl_file(3), tls_config_set_crl_mem(3), tls_config_set_key_file(3), tls_config_set_key_mem(3), tls_config_set_ocsp_staple_mem(3), tls_config_set_ocsp_staple_file(3), tls_config_set_keypair_file(3), tls_config_set_keypair_mem(3), tls_config_set_keypair_ocsp_file(3), tls_config_set_keypair_ocsp_mem(3), tls_config_add_keypair_file(3), tls_config_add_keypair_ocsp_mem(3), tls_config_add_keypair_ocsp_file(3), tls_config_add_keypair_mem(3), tls_config_clear_keys(3), tls_config_set_verify_depth(3), tls_config_verify_client(3), tls_config_verify_client_optional(3), tls_default_ca_cert_file(3)
TLS certificate and key configuration
tm.tcl85(n), tm(n)
Facilities for locating and loading of Tcl Modules
tm.tcl86(n), tm(n)
Facilities for locating and loading of Tcl Modules
tm.tcl87(n), tm(n)
Facilities for locating and loading of Tcl Modules
tpm2_certify(1), tpm2_certify(1)(1)
Prove that an object is loaded in the TPM
tpm2_certifycreation(1), tpm2_certifycreation(1)(1)
Attest the association between a loaded public area and the provided hash of the creation data
tpm2_duplicate(1), tpm2_duplicate(1)(1)
Duplicates a loaded object so that it may be used in a different hierarchy
tpm2_flushcontext(1), tpm2_flushcontext(1)(1)
Remove a specified handle, or all contexts associated with a transient object, loaded session or saved session from the TPM
tpm2_load(1), tpm2_load(1)(1)
Load an object into the TPM
tpm2_loadexternal(1), tpm2_loadexternal(1)(1)
Load an external object into the TPM
tpm2_makecredential(1), tpm2_makecredential(1)(1)
Load an object that is not a Protected Object into the TPM
tpm2_readpublic(1), tpm2_readpublic(1)(1)
Read the public area of a loaded object
tpm2_unseal(1), tpm2_unseal(1)(1)
Returns a data blob in a loaded TPM object. The data blob is returned in clear
ts-contribute(1)
tsin vocabulary uploader for gcin
ts_conf_set(3)
write a new TSLIB_CONFFILE config file and reload it
tsk_loaddb(1)
populate a SQLite database with metadata from a disk image
tsung(1)
A distributed multi-protocol load testing tool
tsung-recorder(1)
Proxy recorder for the tsung load testing tool
ttyload(1)
a tty-based xload equivalent
ufdbupdate(8), ufdbUpdate(8)
download a URL database
unload.tcl85(n), unload(n)
Unload machine code
unload.tcl86(n), unload(n)
Unload machine code
unload.tcl87(n), unload(n)
Unload machine code
unload_datafile(3)
Frees all the objects in a datafile. Allegro game programming library
unload_datafile_object(3)
Frees an object previously loaded by load_datafile_object(). Allegro game programming library
urxvt-selection-pastebin(1), selection-pastebin(1)
automatic pastebin upload
vfs_readahead(8)
pre-load the kernel buffer cache
viewrdsparam(3)
displays tables in memory filled by loadrdsparam function. man1/alc_origin.1
volpack-Identity(3), vpIdentityMatrix(3)
load the identity matrix into the current transformation matrix
volpack-Load(3), vpLoadRawVolume(3), vpLoadMinMaxOctree(3), vpLoadClassifiedVolume(3), vpLoadContext(3)
load volume data structures from a file
volpack-SetMatrix(3), vpSetMatrix(3)
load a matrix into the current transformation matrix
webcam(1)
capture images and upload them to a webserver using ftp
webcrawl(1), WebCrawl(1)
download web sites, following links
webjob(1), WebJob(1)
Download and execute a program over HTTP/HTTPS
weboorrents(1)
search and download torrents
wget(1), Wget(1)
The non-interactive network downloader
wmget(1)
Background download manager in a dockapp
wmmemload(1)
A dockapp to monitor memory/swap usages
wput(1)
A wget-like ftp-uploader
wxdfast(1), wxDownload Fast(1)
a multithread download manager created using the wxWidgets library
xli(1), xsetbg(1), xview(1)
load images into an X11 window or onto the root window
xlito(1), xlito (XLoadImageTrailingOptions)(1)
Append/Delete/Show a Trailing Option string in a file
xload(1)
system load average display for X
xloadimage(1), xsetbg(1), xview(1)
load images into an X11 window or onto the root window
xorriso(1)
creates, loads, manipulates and writes ISO 9660 filesystem images with Rock Ridge extensions
yafzcbalance(1)
PF_RING ZC Load balancer for YAF
youtube-dl(1)
download videos from youtube.com or other video platforms
zckdl(1)
download a zchunk file
zfs-load-key(8)
load, unload, or change encryption key of ZFS dataset
zshmodules(1)
zsh loadable modules
Alien::Build::Plugin::Core::Download(3)
Core download plugin
Alien::Build::Plugin::Download(3)
Download Alien::Build plugins
Alien::Build::Plugin::Download::Negotiate(3)
Download negotiation plugin
Alien::Build::Plugin::Extract::Directory(3)
Plugin to extract a downloaded directory to a build directory
Alzabo::Create(3)
Loads all Alzabo::Create::* classes
Alzabo::Runtime(3)
Loads all Alzabo::Runtime::* classes
Amon2::Config::Simple(3)
Default configuration file loader
Any::URI::Escape(3)
Load URI::Escape::XS preferentially over URI::Escape
Apache2::Reload(3)
Reload Perl Modules when Changed on Disk
Apache2::Upload(3)
Methods for dealing with file uploads
Apache::ConfigParser(3)
Load Apache configuration files
Apache::Reload(3)
Reload changed modules
App::Regather::Plugin(3)
plugin (module) loader
App::Yath::Command::reload(3)
Reload the persistent test runner
App::Yath::Command::spawn(3)
Launch a perl script from the preloaded environment
AutoLoader(3)
load subroutines only on demand
AutoSplit(3)
split a package for autoloading
B::Stash(3)
show what stashes are loaded
BSD::getloadavg(3)
Perl Interface to getloadavg (3)
Badger::Modules(3)
a module for loading modules
BcVersions(3)
ByteLoader bytecode versions
Best(3)
Load modules with fallback
Bio::Factory::DriverFactory(3)
Base class for factory classes loading drivers
Bio::MAGETAB::Util::DBLoader(3)
A persistent storage class used to track Bio::MAGETAB object creation and insertion into a relational database
Bit::Vector::Overload(3)
Overloaded operators add-on for Bit::Vector
ByteLoader(3)
load byte compiled perl code
CAD::Drawing(3)
Methods to create, load, and save vector graphics
CAD::Drawing::IO::Circ(3)
load and save for circle data
CAD::Drawing::IO::Compressed(3)
load and save compressed data
CGI::Upload(3)
CGI class for handling browser file uploads
CGI::Utils::UploadFile(3)
CGI::Utils::UploadFile
CPAN(3)
query, download and build perl modules from CPAN sites
CPAN::Recent::Uploads(3)
Find the distributions recently uploaded to CPAN
CPAN::Recent::Uploads::Retriever(3)
Retrieves recentfiles from a CPAN mirror
CPAN::Uploader(3)
upload things to the CPAN
CSS::Sass::Value(3)
Data Types for custom Sass Functions n .SH "Mapping ""Sass_Values"" to perl data structures" .SH "Mapping Sass_Values to perl data structures" Header "Mapping Sass_Values to perl data structures" You can use maps and lists like normal hash or array references. Lists can have two different separators used for stringification. This is detected by checking if the object is derived from CSS::Sass::Value::List::Space. The default is a comma separated list, which you get by instantiating CSS::Sass::Value::List or CSS::Sass::Value::List::Comma. my $null = CSS::Sass::Value->new(undef); # => null my $number = CSS::Sass::Value->new(42.35); # => 42.35 my $string = CSS::Sass::Value->new("foobar"); # => foobar my $map = CSS::Sass::Value->new({ key => "foobar" }); # key: foobar my $list = CSS::Sass::Value->new([ "foo", 42, "bar" ]); # foo, 42, bar my $space = CSS::Sass::Value::List::Space->new("foo", "bar"); # foo bar my $comma = CSS::Sass::Value::List::Comma->new("foo", "bar"); # foo, bar You can also return these native perl types from custom functions. They will automatically be upgraded to real CSS::Sass::Value objects. All types overload the stringify and eq operators (so far)
Catalyst::EngineLoader(3)
The Catalyst Engine Loader
Catalyst::Manual::Deployment::DevelopmentServer(3), Catalyst::Manual::DevelopmentServer(3)
Development server deployment The development server is a mini web server written in Perl. However, if you supply the "-f" option to the development server, it will load the higher performance Starman server, which can be used as an application server with a lightweight proxy web server at the front
Catalyst::Model::DynamicAdaptor(3)
Dynamically load adaptor modules
Catalyst::Plugin::ConfigLoader(3)
Load config files of various types
Catalyst::Plugin::ConfigLoader::Environment(3)
Configure your application with environment variables
Catalyst::Plugin::ConfigLoader::Manual(3)
Guide to using the ConfigLoader plugin
Catalyst::Request::Upload(3)
handles file upload requests
CatalystX::Component::Traits(3)
Automatic Trait Loading and Resolution for Catalyst Components
Class::Autouse(3)
Run-time load a class the first time you call a method in it
Class::C3::Componentised(3)
Load mix-ins or components to your C3-based class
Class::DBI::AutoLoader(3)
Generates Class::DBI subclasses dynamically
Class::DBI::Loader(3)
Dynamic definition of Class::DBI sub classes
Class::DBI::Loader::Generic(3)
Generic Class::DBI::Loader Implementation
Class::DBI::Loader::Pg(3)
Class::DBI::Loader Postgres Implementation
Class::DBI::Loader::Relationship(3)
Easier relationship specification in CDBI::Loader
Class::DBI::Loader::SQLite(3)
Class::DBI::Loader SQLite Implementation
Class::DBI::Loader::mysql(3)
Class::DBI::Loader mysql Implementation
Class::Load(3)
A working (require "Class::Name") and more
Class::Load::XS(3)
XS implementation of parts of Class::Load
Class::Loader(3)
Load modules and create objects on demand
Class::MOP::Mixin::HasOverloads(3)
Methods for metaclasses which have overloads
Class::MOP::Overload(3)
Overload Meta Object
Class::MakeMethods::Autoload(3)
Declare generated subs with AUTOLOAD
Class::MethodMapper(3)
Abstract Class wrapper for AutoLoader
Class::Multimethods(3)
Support multimethods and function overloading in Perl
Class::Unload(3)
Unload a class
Class::Workflow::YAML(3)
Load workflow definitions from YAML files
Config::Any(3)
Load configuration from different file formats, transparently
Config::Any::Base(3)
Base class for loaders
Config::Any::General(3)
Load Config::General files
Config::Any::INI(3)
Load INI config files
Config::Any::JSON(3)
Load JSON config files
Config::Any::Perl(3)
Load Perl config files
Config::Any::XML(3)
Load XML config files
Config::Any::YAML(3)
Load YAML config files
Config::GitLike::Git(3)
load Git configuration files
Config::Identity(3)
Load (and optionally decrypt via GnuPG) user/pass identity information
Config::JFDI(3)
Just * Do it: A Catalyst::Plugin::ConfigLoader-style layer over Config::Any
Config::MVP::Assembler(3)
multivalue-property config-loading state machine
Config::Merge(3)
load a configuration directory tree containing YAML, JSON, XML, Perl, INI or Config::General files
Config::Merge::Perl(3)
Load Perl config files
Config::Model::BackendMgr(3)
Load configuration node on demand
Config::Model::Loader(3)
Load serialized data into config tree
Config::Model::Role::NodeLoader(3)
Load Node element in configuration tree
Config::Std(3)
Load and save configuration files in a standard format
Crypt::Random::Source::Factory(3)
Load and instantiate sources of random data
DBD::Multi(3)
Manage Multiple Data Sources with Failover and Load Balancing
DBIx::Class::Loader(3)
Dynamic definition of DBIx::Class sub classes
DBIx::Class::Loader::DB2(3)
DBIx::Class::Loader DB2 Implementation
DBIx::Class::Loader::Generic(3)
Generic DBIx::Class::Loader Implementation
DBIx::Class::Loader::Pg(3)
DBIx::Class::Loader Postgres Implementation
DBIx::Class::Loader::SQLite(3)
DBIx::Class::Loader SQLite Implementation
DBIx::Class::Loader::Writing(3)
Loader subclass writing guide
DBIx::Class::Loader::mysql(3)
DBIx::Class::Loader mysql Implementation
DBIx::Class::Manual::Features(3)
A boatload of DBIx::Class features with links to respective documentation
DBIx::Class::Migration::RunScript::Trait::Populate(3)
Populate fixtures =head1 SYNOPSIS use DBIx::Class::Migration::RunScript; builder { SchemaLoader, Populate, sub { shift->populate(countries); }; };
DBIx::Class::Migration::RunScript::Trait::SchemaLoader(3)
Give your Run Script a Schema
DBIx::Class::Migration::SchemaLoader(3)
Schema Loader Factory
DBIx::Class::Migration::Script::Help::fixture_sets(3)
fixture sets to dump or load
DBIx::Class::Schema::Loader(3)
Create a DBIx::Class::Schema based on a database
DBIx::Class::Schema::Loader::Base(3)
Base DBIx::Class::Schema::Loader Implementation
DBIx::Class::Schema::Loader::Column(3)
Class for Columns in DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::DBI(3)
DBIx::Class::Schema::Loader DBI Implementation
DBIx::Class::Schema::Loader::DBI::ADO(3)
DBD::ADO proxy
DBIx::Class::Schema::Loader::DBI::ADO::MS_Jet(3)
ADO wrapper for DBIx::Class::Schema::Loader::DBI::ODBC::ACCESS
DBIx::Class::Schema::Loader::DBI::ADO::Microsoft_SQL_Server(3)
ADO wrapper for DBIx::Class::Schema::Loader::DBI::MSSQL
DBIx::Class::Schema::Loader::DBI::Component::QuotedDefault(3)
-- Loader::DBI Component to parse quoted default constants and functions
DBIx::Class::Schema::Loader::DBI::DB2(3)
DBIx::Class::Schema::Loader::DBI DB2 Implementation
DBIx::Class::Schema::Loader::DBI::Firebird(3)
DBIx::Class::Schema::Loader::DBI DBD::Firebird subclass
DBIx::Class::Schema::Loader::DBI::Informix(3)
DBIx::Class::Schema::Loader::DBI Informix Implementation
DBIx::Class::Schema::Loader::DBI::InterBase(3)
DBIx::Class::Schema::Loader::DBI Firebird Implementation
DBIx::Class::Schema::Loader::DBI::MSSQL(3)
DBIx::Class::Schema::Loader::DBI MSSQL Implementation
DBIx::Class::Schema::Loader::DBI::ODBC(3)
DBD::ODBC proxy
DBIx::Class::Schema::Loader::DBI::ODBC::ACCESS(3)
Microsoft Access driver for DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::DBI::ODBC::Firebird(3)
ODBC wrapper for DBIx::Class::Schema::Loader::DBI::InterBase
DBIx::Class::Schema::Loader::DBI::ODBC::Microsoft_SQL_Server(3)
ODBC wrapper for DBIx::Class::Schema::Loader::DBI::MSSQL
DBIx::Class::Schema::Loader::DBI::ODBC::SQL_Anywhere(3)
ODBC wrapper for DBIx::Class::Schema::Loader::DBI::SQLAnywhere
DBIx::Class::Schema::Loader::DBI::Oracle(3)
DBIx::Class::Schema::Loader::DBI Oracle Implementation
DBIx::Class::Schema::Loader::DBI::Pg(3)
DBIx::Class::Schema::Loader::DBI PostgreSQL Implementation
DBIx::Class::Schema::Loader::DBI::SQLAnywhere(3)
DBIx::Class::Schema::Loader::DBI SQL Anywhere Implementation
DBIx::Class::Schema::Loader::DBI::SQLite(3)
DBIx::Class::Schema::Loader::DBI SQLite Implementation
DBIx::Class::Schema::Loader::DBI::Sybase(3)
DBIx::Class::Schema::Loader::DBI Sybase ASE Implementation
DBIx::Class::Schema::Loader::DBI::Sybase::Common(3)
Common methods for Sybase and MSSQL
DBIx::Class::Schema::Loader::DBI::Sybase::Microsoft_SQL_Server(3)
Driver for using Microsoft SQL Server through DBD::Sybase
DBIx::Class::Schema::Loader::DBI::Writing(3)
Loader subclass writing guide for DBI
DBIx::Class::Schema::Loader::DBI::mysql(3)
DBIx::Class::Schema::Loader::DBI mysql Implementation
DBIx::Class::Schema::Loader::DBObject(3)
Base Class for Database Objects Such as Tables and Views in DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::DBObject::Informix(3)
Class for Database Objects for Informix Such as Tables and Views in DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::DBObject::Sybase(3)
Class for Database Objects for Sybase ASE and MSSQL Such as Tables and Views in DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::Manual::UpgradingFromV4(3)
Important Information Related to Upgrading from Version 0.04006
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3)
Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
DBIx::Class::Schema::Loader::RelBuilder(3)
Builds relationships for DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_040(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.04006
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_05(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.05003
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_06(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.06000
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_07(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.07000
DBIx::Class::Schema::Loader::Table(3)
Class for Tables in DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::Table::Informix(3)
Class for Informix Tables in DBIx::Class::Schema::Loader
DBIx::Class::Schema::Loader::Table::Sybase(3)
Class for Sybase ASE and MSSQL Tables in DBIx::Class::Schema::Loader
DBIx::Class::Storage::DBI::Replicated::Balancer(3)
A Software Load Balancer
DBIx::SearchBuilder::Record(3)
Superclass for records loaded by SearchBuilder
DBIx::Skinny::Schema::Loader(3)
Schema loader for DBIx::Skinny
Daemon::Generic(3), Daemon::Generic(3)
framework to provide start/stop/reload for a daemon
Dancer2::Core::Request::Upload(3)
Class representing file upload requests
Dancer::ModuleLoader(3)
dynamic module loading helpers for Dancer core components
Dancer::Request::Upload(3)
class representing file uploads requests
Data::Entropy::RawSource::RandomOrg(3)
download entropy from random.org
Data::Entropy::RawSource::RandomnumbersInfo(3)
download entropy from randomnumbers.info
Data::FormValidator::Constraints::Upload(3)
Validate File Uploads
Data::HashArray(3)
An array class of hashes that has magical properties via overloading and AUTOLOAD
Data::Phrasebook::Loader(3)
Plugin Loader module
Data::Phrasebook::Loader::Base(3)
Base loader plugin class
Data::Phrasebook::Loader::Text(3)
Absract your phrases with plain text files
Data::Phrasebook::Loader::YAML(3)
Absract your phrases with YAML
Data::Printer::Config(3)
Load run-control (.dataprinter) files for Data::Printer
Date::Calc::Object(3)
Object-oriented add-on for Date::Calc with overloaded operators
Date::Pcalc::Object(3)
Object-oriented add-on for Date::Pcalc with overloaded operators
Date::Simple::Fmt(3)
Sub class of Date::Simple with per object level formatting for overloaded stringification
Devel::Events::Generator::Require(3)
Event generator for loading of code using "require"
Devel::MAT::Dumpfile(3), "Devel::MAT::Dumpfile"(3)
load and analyse a heap dump file
Devel::NYTProf::Core(3)
load internals of Devel::NYTProf
Devel::NYTProf::Data(3)
Devel::NYTProf data loading and manipulation
Devel::OverloadInfo(3)
introspect overloaded operators
Devel::REPL::Plugin::Nopaste(3)
#nopaste to upload session's input and output
Devel::REPL::Plugin::Refresh(3)
Reload libraries with Module::Refresh
Devel::SelfStubber(3)
generate stubs for a SelfLoading module
Devel::TraceUse(3)
show the modules your program loads, recursively
Dist::Zilla::Plugin::UploadToCPAN(3)
upload the dist to CPAN
DtDbLoad(3)
load actions and data types database
DtDbReloadNotify(3)
reload the Dt actions and data typing services database
DtDtsLoadDataTypes(3)
load and initialize the data types database
DtEditorSetContentsFromFile(3)
load data from a file into a DtEditor widget
DtInfo_LoadInfoLib(4)
load the specified infolib
DynaLoader(3)
Dynamically load C libraries into Perl code
DynaLoader::Functions(3)
deconstructed dynamic C library loading
ExtUtils::Mkbootstrap(3)
make a bootstrap file for use by DynaLoader
Fcntl(3)
load the C Fcntl.h defines
Firefox::Marionette::Timeouts(3)
Represents the timeouts for page loading, searching, and scripts
Flickr::API::Upload(3)
An upload via the Flickr API
Flickr::Upload(3)
Upload images to "flickr.com"
Font::FreeType::CharMap(3)
character map from font typefaces loaded from Font::FreeType
Font::FreeType::Face(3)
font typefaces loaded from Font::FreeType
Font::FreeType::Glyph(3)
glyphs from font typefaces loaded from Font::FreeType
Font::TTF::Fpgm(3)
Font program in a TrueType font. Called when a font is loaded
Forest::Tree::Loader(3)
An abstract role for loading trees
Forest::Tree::Loader::SimpleUIDLoader(3)
Loads a Forest::Tree heirarchy using UIDs
Forest::Tree::Roles::LoadWithMetaData(3)
A Moosey solution to this problem
Gearman::Server(3)
function call "router" and load balancer
Genezzo::Havok::SysHelp(3)
load the sys_help table
Genezzo::Havok::SysHook(3)
load the SysHook table
Genezzo::Havok::UserExtend(3)
load the UserExtend table
Genezzo::Havok::UserFunctions(3)
load the user_functions table
Getopt::EX::Loader(3)
RC/Module loader
Gimp(3)
Write GIMP extensions/plug-ins/load- and save-handlers in Perl
Glib::Flags(3)
methods and overloaded operators for flags
Goo::ConfigFile(3)
Parse and load .goo files. Based loosely on .ini files
Goo::Lister(3)
Load a whole list of Things in one go
Goo::Loader(3)
Load a Thing from Goo space
Goo::Thing::tpm::TestLoader(3), TestLoader(3)
Load a test from disk to run
Gtk2::Ex::FormFactory::Loader(3)
Dynamic loading of FormFactory modules
Gtk2::Gdk::PixbufLoader(3)
wrapper for GdkPixbufLoader
HTML::FormFu::Constraint::File(3)
File Upload Constraint
HTML::FormFu::Element::File(3)
File upload form field
HTML::FormFu::Imager(3)
Imager.pm helpers for HTML::FormFu file uploads
HTML::FormFu::Preload(3)
preload plugins
HTML::FormFu::QueryType::CGI(3)
uploaded file
HTML::FormFu::QueryType::CGI::Simple(3)
uploaded file
HTML::FormFu::QueryType::Catalyst(3)
uploaded file
HTML::FormFu::Upload(3)
uploaded file
HTML::FormFu::UploadParam(3)
accessor class
HTML::FormHandler::Field::Upload(3)
file upload field
HTML::FormHandler::Foo(3)
Experiment in loading form from config file
HTML::FormHandler::Widget::Field::Upload(3)
update field rendering widget
HTML::MobileJp::Plugin::EZweb::Object(3)
generate object object download HTML tag
HTML::Perlinfo::Loaded(3)
Post-execution HTML dump of loaded modules and environment variables
HTML::Shakan::Field::File(3)
file upload field
HTML::Template::Compiled::Lazy(3)
Lazy Loading for HTML::Template::Compiled
HTTP::Engine::Middleware::ModuleReload(3)
module reloader for HTTP::Engine
HTTP::Engine::Middleware::UploadTemp(3)
Deprecated. Please use $req->builder_options->{upload_tmp}
HTTP::Engine::MinimalCGI(3)
fast loading, minimal HTTP::Engine::Interface
HTTP::Engine::Request::Upload(3)
handles file upload requests
HTTP::Exception::Loader(3)
Creates HTTP::Exception subclasses
HTTP::WebTest::Plugin::Loader(3)
Loads external plugins
IO(3)
load various IO modules
IO::Socket::SSL::Utils(3)
-- loading, storing, creating certificates and keys
Image::Base(3)
base class for loading, manipulating and saving images
Image::Imgur(3)
Perl extension for uploading images to http://imgur.com
JMX::Jmx4Perl::Agent::Jolokia::DownloadAgent(3)
Specialized LWP::UserAgent adding some bells and whistles for downloading agents and other stuff
JMX::Jmx4Perl::Agent::Jolokia::Verifier::ChecksumVerifier(3)
Verifies a checksum for a downloaded artifact
JSON::Validator::Store(3)
Load and caching JSON schemas
Jifty::ClassLoader(3)
Loads the application classes
Jifty::DBI::Record(3)
Superclass for records loaded by Jifty::DBI::Collection
Jifty::Everything(3)
Load all of the important Jifty modules at once
Jifty::Manual::Preload(3)
One Path to a Snappy UI
Jifty::Plugin::ClassLoader(3)
Automatically generates application classes
Jifty::Plugin::TestServerWarnings::View(3)
Downloads test warnings
Jifty::Web::FileUpload(3)
Describes an HTTP file upload
Jifty::Web::Form::Field::Upload(3)
File upload field
Jifty::Web::Form::Field::Uploads(3)
File uploads field
Lingua::Stem::AutoLoader(3)
A manager for autoloading Lingua::Stem modules
Locale::Maketext::Guts(3)
Deprecated module to load Locale::Maketext utf8 code
Locale::Maketext::GutsLoader(3)
Deprecated module to load Locale::Maketext utf8 code
Log::Any::IfLOG(3)
Load Log::Any only if "logging is enabled"
Log::Handler::Config(3)
The main config loader
Log::Handler::Plugin::Config::General(3)
Config loader for Config::General
Log::Handler::Plugin::Config::Properties(3)
Config loader for Config::Properties
Log::Handler::Plugin::YAML(3)
Config loader for YAML
Mail::Alias(3)
Maniulates mail alias files of various formats. Works on files directly or loads files into memory and works on the buffer
Mail::DKIM::PrivateKey(3)
a private key loaded in memory for DKIM signing
Mail::OpenDKIM::PrivateKey(3)
Load in a private key for use with the Mail::OpenDKIM package
Mail::SpamAssassin::Conf::LDAP(3)
load SpamAssassin scores from LDAP database
Mail::SpamAssassin::Conf::SQL(3)
load SpamAssassin scores from SQL database
Mail::SpamAssassin::GeoDB(3)
unified interface for geoip modules Plugins need to signal SA main package the modules they want loaded package Mail::SpamAssassin::Plugin::MyPlugin; sub new { ... $self->{main}->{geodb_wanted}->{country} = 1; $self->{main}->{geodb_wanted}->{isp} = 1; ) (internal stuff still subject to change)
Math::PariInit(3)
load "Math::Pari" with specified $primelimit and $initmem
Maypole::Model::CDBI::Plain(3)
Class::DBI model without ::Loader
McBain::WithPSGI(3)
Load a McBain API as a RESTful PSGI web service
MetaCPAN::Client::DownloadURL(3)
A Download URL data object
ModPerl::RegistryLoader(3)
Compile ModPerl::RegistryCooker scripts at server startup
Module::Implementation(3)
Loads one of several alternate underlying implementations for a module
Module::Load(3)
runtime require of both modules and files
Module::Load::Conditional(3)
Looking up module information / loading at runtime
Module::Load::Util(3)
Some utility routines related to module loading
Module::Loaded(3)
mark modules as loaded or unloaded
Module::Loader(3)
finding and loading modules in a given namespace
Module::Release::PAUSE(3)
Interact with the Perl Authors Upload Server (PAUSE)
Module::Release::WebUpload::Mojo(3)
Upload through the PAUSE web interface
Module::Reload(3)
Reload %INC files when updated on disk
Module::Reload::Selective(3)
Reload perl modules during development
Module::Used(3)
Find modules loaded by Perl code without running it
Module::Versions(3)
Handle versions of loaded modules with flexible result interface
Mojo::Loader(3)
Load all kinds of things
Mojo::Upload(3)
Upload
Mojolicious::Plugin::HamlRenderer(3)
Load HAML renderer
MongoDB::GridFSBucket::DownloadStream(3)
File handle abstraction for downloading
MongoDB::GridFSBucket::UploadStream(3)
File handle abstraction for uploading
MooX::ConfigFromFile::Role::HashMergeLoaded(3)
allows better merge strategies for multiple config files
Moose::Cookbook::Basics::Genome_OverloadingSubtypesAndCoercion(3)
Operator overloading, subtypes, and coercion
MooseX::App::Command(3)
Load command class metaclasses
MooseX::MarkAsMethods(3)
Mark overload code symbols as methods
MooseX::Traits::Pluggable(3)
trait loading and resolution for Moose
MooseX::Types::LoadableClass(3)
ClassName type constraint with coercion to load the class
Net::ACL::File::ASPath(3)
AS-path access-lists loaded from configuration string
Net::ACL::File::Community(3)
Community-lists loaded from configuration string
Net::ACL::File::IPAccess(3)
IP access-lists loaded from configuration string
Net::ACL::File::IPAccessExt(3)
Extended IP access-lists loaded from configuration string
Net::ACL::File::Prefix(3)
Prefix-lists loaded from configuration string
Net::ACL::File::RouteMap(3)
BGP Route-Maps loaded from configuration string
Net::ACL::File::Standard(3)
Standard access-lists loaded from configuration string
Net::AMQP::Protocol(3)
Loading code of the AMQP spec
Net::Amazon::MechanicalTurk::Command::ListOperations(3)
Lists MechanicalTurk requester operations. Returns a list of method names that may be called against the requester API. This method parses the WSDL used for the MechanicalTurk soap endpoint. This method may fail while attempting to download the WSDL document
Net::Amazon::MechanicalTurk::Command::LoadHITs(3)
Bulk Loading support for Amazon Mechancial Turk. This module adds the loadHITs method to the Net::Amazon::MechanicalTurk class
Net::Amazon::Property::DigitalMusicTrack(3), Net::Amazon::Property::DigitalMusicTrack-(3)
Class for MP3 downloads on amazon.com
Net::Amazon::Request::MP3Downloads(3)
Class for submitting MP3 downloads search requests
Net::Amazon::S3::Operation::Object::Upload::Abort(3)
Internal class to perform AbortMultipartUpload operation
Net::Amazon::S3::Operation::Object::Upload::Abort::Request(3)
An internal class to abort a multipart upload
Net::Amazon::S3::Operation::Object::Upload::Abort::Response(3)
An internal class to handle abort multipart upload response
Net::Amazon::S3::Operation::Object::Upload::Complete(3)
Internal class to perform CompleteMultipartUpload operation
Net::Amazon::S3::Operation::Object::Upload::Complete::Request(3)
An internal class to complete a multipart upload
Net::Amazon::S3::Operation::Object::Upload::Complete::Response(3)
An internal class to handle complete a multipart upload response
Net::Amazon::S3::Operation::Object::Upload::Create(3)
Internal class to perform CreateMultipartUpload operation
Net::Amazon::S3::Operation::Object::Upload::Create::Request(3)
An internal class to begin a multipart upload
Net::Amazon::S3::Operation::Object::Upload::Create::Response(3)
An internal class to handle create multipart upload response
Net::Amazon::S3::Operation::Object::Upload::Part(3), Net::Amazon::S3::Operation::Object::Part(3)
Internal class to perform UploadPart operation
Net::Amazon::S3::Operation::Object::Upload::Part::Request(3)
An internal class to put part of a multipart upload
Net::Amazon::S3::Operation::Object::Upload::Part::Response(3)
Internal class to handle UploadPart operation's response
Net::Amazon::S3::Operation::Object::Upload::Parts(3), Net::Amazon::S3::Operation::Object::Parts::Complete(3)
Internal class to perform ListParts operation
Net::Amazon::S3::Operation::Object::Upload::Parts::Request(3)
List the parts in a multipart upload
Net::Amazon::S3::Operation::Object::Upload::Parts::Response(3)
An internal class to handle multipart upload parts list responses
Net::Amazon::S3::Request::Role::Query::Action::Restore(3)
uploads query action role
Net::Amazon::S3::Request::Role::Query::Action::Uploads(3)
uploads query action role
Net::Amazon::S3::Request::Role::Query::Param::Upload_id(3)
upload_id query param role
Net::Amazon::Validate::ItemSearch::de::MP3Downloads(3)
valid search indicies for the de locale and the MP3Downloads SearchIndex
Net::Amazon::Validate::ItemSearch::fr::MP3Downloads(3)
valid search indicies for the fr locale and the MP3Downloads SearchIndex
Net::Amazon::Validate::ItemSearch::uk::MP3Downloads(3)
valid search indicies for the uk locale and the MP3Downloads SearchIndex
Net::Amazon::Validate::ItemSearch::us::MP3Downloads(3)
valid search indicies for the us locale and the MP3Downloads SearchIndex
Net::CLI::Interact::Phrasebook(3)
Load command phrasebooks from a Library
Net::DNS::ToolKit::RR(3)
Resource Record class loader
Net::FS::Flickr::Access(3)
a sub class of Flickr::Upload with some convenience methods for Net::FS::Flickr
Net::Gnats::Response(3)
A Gnats payload class
Net::Google::Code::Download(3)
Google Code Download
Net::LDAP::Extra(3)
-- Load extra Net::LDAP methods
Net::LDAP::Schema(3)
Load and manipulate an LDAP v3 Schema
Net::MQTT::Message::JustMessageId(3)
Perl module for an MQTT message w/message id only payload
Net::SSH::Perl::Config(3)
Load and manage SSH configuration
Net::Twitter::Role::API::Upload(3)
A definition of the Twitter Upload API as a Moose role
Net::Twitter::Role::API::UploadMedia(3), Net::Twitter::Role::API::UploadImage(3)
A definition of the Twitter Upload API as a Moose role
Net::vFile(3)
Generic module which can read and write "vFile" files such as vCard (RFC 2426) and vCalendar (RFC 2445). The result of loading this data is a collection of objects which will grant you easy access to the properties. Then the module can write your objects back to a data file
Newsletter::Html::Upload(3)
Fileupload!
Ogg::Vorbis::Header::PurePerl(3)
An object-oriented interface to Ogg Vorbis information and comment fields, implemented entirely in Perl. Intended to be a drop in replacement for Ogg::Vobis::Header. Unlike Ogg::Vorbis::Header, this module will go ahead and fill in all of the information fields as soon as you construct the object. In other words, the "new" and "load" constructors have identical behavior
OpenXPKI::Config::Loader(3)
Backend connector to load system config from BLOB
OpenXPKI::Crypto::Backend::OpenSSL::Command::pkcs7_get_payload(3), Header(3)
"Name" OpenXPKI::Crypto::Backend::OpenSSL::Command::pkcs7_get_payload
OpenXPKI::Server::API2::Autoloader(3)
Thin wrapper around the API that virtually provides all API commands as instance methods
OpenXPKI::Server::Workflow::Activity::Tools::LoadCertificateMetadata(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::LoadCertificateMetadata;
OpenXPKI::Server::Workflow::Activity::Tools::LoadPolicy(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::LoadPolicy
OpenXPKI::Server::Workflow::Activity::User::LoadUserData(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::User::LoadUserData;
PDF::API3::Compat::API2::Basic::TTF::Fpgm(3)
Font program in a TrueType font. Called when a font is loaded
PDL::AutoLoader(3)
MatLab style AutoLoader for PDL
PDL::Lite(3)
minimum PDL module OO loader
PDL::LiteF(3)
minimum PDL module function loader
POE::Component::IRC::Cookbook::Reload(3)
Reload your bot's code after a change
POE::Resources(3)
loader of POE resources
Paranoid::Module(3)
-- Paranoid Module Loading Routines
Path::Abstract::Underload(3)
Path::Abstract without stringification overloading
Paws::AutoScaling::AttachLoadBalancers(3)
Arguments for method AttachLoadBalancers on Paws::AutoScaling
Paws::AutoScaling::DescribeLoadBalancers(3)
Arguments for method DescribeLoadBalancers on Paws::AutoScaling
Paws::AutoScaling::DetachLoadBalancers(3)
Arguments for method DetachLoadBalancers on Paws::AutoScaling
Paws::CloudSearchDomain::UploadDocuments(3)
Arguments for method UploadDocuments on Paws::CloudSearchDomain
Paws::DeviceFarm::CreateUpload(3)
Arguments for method CreateUpload on Paws::DeviceFarm
Paws::DeviceFarm::GetUpload(3)
Arguments for method GetUpload on Paws::DeviceFarm
Paws::DeviceFarm::ListUploads(3)
Arguments for method ListUploads on Paws::DeviceFarm
Paws::ELB(3)
Perl Interface to AWS Elastic Load Balancing
Paws::ELB::ApplySecurityGroupsToLoadBalancer(3)
Arguments for method ApplySecurityGroupsToLoadBalancer on Paws::ELB
Paws::ELB::AttachLoadBalancerToSubnets(3)
Arguments for method AttachLoadBalancerToSubnets on Paws::ELB
Paws::ELB::CreateLoadBalancer(3)
Arguments for method CreateLoadBalancer on Paws::ELB
Paws::ELB::CreateLoadBalancerListeners(3)
Arguments for method CreateLoadBalancerListeners on Paws::ELB
Paws::ELB::CreateLoadBalancerPolicy(3)
Arguments for method CreateLoadBalancerPolicy on Paws::ELB
Paws::ELB::DeleteLoadBalancer(3)
Arguments for method DeleteLoadBalancer on Paws::ELB
Paws::ELB::DeleteLoadBalancerListeners(3)
Arguments for method DeleteLoadBalancerListeners on Paws::ELB
Paws::ELB::DeleteLoadBalancerPolicy(3)
Arguments for method DeleteLoadBalancerPolicy on Paws::ELB
Paws::ELB::DeregisterInstancesFromLoadBalancer(3)
Arguments for method DeregisterInstancesFromLoadBalancer on Paws::ELB
Paws::ELB::DescribeLoadBalancerAttributes(3)
Arguments for method DescribeLoadBalancerAttributes on Paws::ELB
Paws::ELB::DescribeLoadBalancerPolicies(3)
Arguments for method DescribeLoadBalancerPolicies on Paws::ELB
Paws::ELB::DescribeLoadBalancerPolicyTypes(3)
Arguments for method DescribeLoadBalancerPolicyTypes on Paws::ELB
Paws::ELB::DescribeLoadBalancers(3)
Arguments for method DescribeLoadBalancers on Paws::ELB
Paws::ELB::DetachLoadBalancerFromSubnets(3)
Arguments for method DetachLoadBalancerFromSubnets on Paws::ELB
Paws::ELB::DisableAvailabilityZonesForLoadBalancer(3)
Arguments for method DisableAvailabilityZonesForLoadBalancer on Paws::ELB
Paws::ELB::EnableAvailabilityZonesForLoadBalancer(3)
Arguments for method EnableAvailabilityZonesForLoadBalancer on Paws::ELB
Paws::ELB::ModifyLoadBalancerAttributes(3)
Arguments for method ModifyLoadBalancerAttributes on Paws::ELB
Paws::ELB::RegisterInstancesWithLoadBalancer(3)
Arguments for method RegisterInstancesWithLoadBalancer on Paws::ELB
Paws::ELB::SetLoadBalancerListenerSSLCertificate(3)
Arguments for method SetLoadBalancerListenerSSLCertificate on Paws::ELB
Paws::ELB::SetLoadBalancerPoliciesForBackendServer(3)
Arguments for method SetLoadBalancerPoliciesForBackendServer on Paws::ELB
Paws::ELB::SetLoadBalancerPoliciesOfListener(3)
Arguments for method SetLoadBalancerPoliciesOfListener on Paws::ELB
Paws::Glacier::AbortMultipartUpload(3)
Arguments for method AbortMultipartUpload on Paws::Glacier
Paws::Glacier::CompleteMultipartUpload(3)
Arguments for method CompleteMultipartUpload on Paws::Glacier
Paws::Glacier::InitiateMultipartUpload(3)
Arguments for method InitiateMultipartUpload on Paws::Glacier
Paws::Glacier::ListMultipartUploads(3)
Arguments for method ListMultipartUploads on Paws::Glacier
Paws::Glacier::UploadArchive(3)
Arguments for method UploadArchive on Paws::Glacier
Paws::Glacier::UploadMultipartPart(3)
Arguments for method UploadMultipartPart on Paws::Glacier
Paws::IAM::UploadSSHPublicKey(3)
Arguments for method UploadSSHPublicKey on Paws::IAM
Paws::IAM::UploadServerCertificate(3)
Arguments for method UploadServerCertificate on Paws::IAM
Paws::IAM::UploadSigningCertificate(3)
Arguments for method UploadSigningCertificate on Paws::IAM
Paws::OpsWorks::AttachElasticLoadBalancer(3)
Arguments for method AttachElasticLoadBalancer on Paws::OpsWorks
Paws::OpsWorks::DescribeElasticLoadBalancers(3)
Arguments for method DescribeElasticLoadBalancers on Paws::OpsWorks
Paws::OpsWorks::DescribeLoadBasedAutoScaling(3)
Arguments for method DescribeLoadBasedAutoScaling on Paws::OpsWorks
Paws::OpsWorks::DetachElasticLoadBalancer(3)
Arguments for method DetachElasticLoadBalancer on Paws::OpsWorks
Paws::OpsWorks::SetLoadBasedAutoScaling(3)
Arguments for method SetLoadBasedAutoScaling on Paws::OpsWorks
Paws::RDS::DownloadDBLogFilePortion(3)
Arguments for method DownloadDBLogFilePortion on Paws::RDS
Paws::S3::AbortMultipartUploadOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Paws::S3::CompleteMultipartUploadOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Paws::S3::CreateMultipartUploadOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Paws::S3::ListMultipartUploadsOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Paws::S3::UploadPartCopyOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Paws::S3::UploadPartOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Paws::StorageGateway::AddUploadBuffer(3)
Arguments for method AddUploadBuffer on Paws::StorageGateway
Paws::StorageGateway::DescribeUploadBuffer(3)
Arguments for method DescribeUploadBuffer on Paws::StorageGateway
Perl::Critic::Policy::ClassHierarchies::ProhibitAutoloading(3)
AUTOLOAD methods should be avoided
Perl::PrereqScanner::Scanner::Superclass(3)
scan for modules loaded with superclass.pm
PerlIO(3)
On demand loader for PerlIO layers and root of PerlIO::* name space
Perlbal(3)
Reverse-proxy load balancer and webserver
Perlbal::Manual::LoadBalancer(3)
Using Perlbal as a Load Balancer
Pithub::Repos::Downloads(3)
Github v3 Repo Downloads API
Plack::Loader(3)
(auto)load Plack Servers
Plack::Loader::Delayed(3)
Delay the loading of .psgi until the first run
Plack::Loader::Restarter(3)
Restarting loader
Plack::Loader::Shotgun(3)
forking implementation of plackup
Plack::Middleware::AutoRefresh(3)
Reload pages in browsers when files are modified
Plack::Middleware::Debug::ModuleVersions(3)
Debug panel to inspect versions of loaded modules
Plack::Middleware::Proxy::LoadBalancer(3)
Simple load balancer
Plack::Request::Upload(3)
handles file upload requests
Plagger::Plugin::Bundle::Defaults(3)
Load default built-in plugins
Pod::Coverage::Overloader(3)
deprecated subclass of Pod::Coverage
Pod::POM::Nodes(3)
convenience class to load all node classes
Pod::WSDL::AUTOLOAD(3)
Base class for autoloading (internal use only)
Prima::VB::VBLoader(3)
Visual Builder file loader
RDF::Query::Algebra::Load(3)
Algebra class for LOAD operations
RDF::Query::Plan::Load(3)
Executable query plan for LOAD operations
Reply::Config(3)
config loading for Reply
Reply::Plugin::LoadClass(3)
attempts to load classes implicitly if possible
ResourcePool::LoadBalancer(3)
A load balancer across ResourcePool's
Rex::Commands::Download(3)
Download remote files
Rex::Commands::Kernel(3)
Load/Unload Kernel Modules
Rex::Commands::Upload(3)
Upload a local file to a remote server
Rose::DB::Object::Loader(3)
Automatically create Rose::DB::Object subclasses based on database table definitions
Rose::HTML::Form::Field::File(3)
Object representation of a file upload field in an HTML form
SPOPS::Tool::DBI::FindDefaults(3)
Load default values from a particular record
SWF(3)
an autoloadable interface module for Ming - a library for generating ShockWave Flash format movies
Schedule::Load(3)
Load distribution and status across multiple host machines
Schedule::Load::Chooser(3)
Distributed load choosing daemon
Schedule::Load::FakeReporter(3)
Distributed load reporting daemon
Schedule::Load::Hold(3)
Return hold/wait information
Schedule::Load::Hosts(3)
Return host loading information across a network
Schedule::Load::Hosts::Host(3)
Return information about a host
Schedule::Load::Hosts::Proc(3)
Return process information
Schedule::Load::Reporter(3)
Distributed load reporting daemon
Schedule::Load::Reporter::Disk(3)
slreportd disk data collector
Schedule::Load::Reporter::Filesys(3)
slreportd filesystem data collector
Schedule::Load::Reporter::Network(3)
slreportd network data collector
Schedule::Load::ResourceReq(3)
Generate a request for a single resource
Schedule::Load::Safe(3)
Evaluate callback in Safe container with caching
Schedule::Load::Schedule(3)
Functions for choosing a host among many
Search::InvertedIndex::AutoLoader(3)
A manager for autoloading Search::InvertedIndex modules
SelfLoader(3)
load functions only on demand
Shared::Examples::Net::Amazon::S3::Fixture::response::create_multipart_upload_with_success(3), Shared::Examples::Net::Amazon::S3::Fixture::response::create-multipart-upload-with-success(3)
Shared::Examples providing response fixture
Squirrel(3)
Use Mouse, unless Moose is already loaded. (DEPRECATED)
Squirrel::Role(3)
Use Mouse::Role, unless Moose::Role is already loaded. (DEPRECATED)
String::RexxParse(3)
Perl implementation of REXX parse command Download: http://www.danofsteel.com/Parser/String-RexxParse-1.10.tar.gz ftp://www.danofsteel.com/pub/RexxParse/String-RexxParse-1.10.tar.gz
Sys::CpuLoad(3)
retrieve system load averages
Sys::Load(3)
Perl module for getting the current system load and uptime
System::Sub::AutoLoad(3)
Auto-wrap external commands as DWIM subs
Template::Provider(3)
Provider module for loading/compiling templates
Template::Provider::FromDATA(3)
Load templates from your _|_DATA_|_ section
Teng::Schema::Loader(3)
Dynamic Schema Loader
Test2::Harness::Runner::DepTracer(3)
Tool for tracing module dependencies as they are loaded
Test2::Harness::Runner::Preload(3)
DSL for building complex stage-based preload tools
Test2::Harness::Runner::Preload::Stage(3)
Abstraction of a preload stage
Test2::Harness::Runner::Preloader(3)
Preload logic
Test2::Harness::Runner::Preloader::Stage(3)
Representation of a persistent stage process
Test2::Manual::Anatomy::EndToEnd(3), Test2::Manual::EndToEnd(3)
Overview of Test2 from load to finish
Test::Class::Load(3)
Load "Test::Class" classes automatically
Test::Command::Simple(3)
Test external commands (nearly) as easily as loaded modules
Test::DiagINC(3)
List modules and versions loaded if tests fail
Test::Fixture::DBI(3)
load fixture data to database
Test::Fixture::DBIC::Schema(3)
load fixture data to storage
Test::LoadAllModules(3)
do use_ok for modules in search path
Test::Requires(3)
Checks to see if the module can be loaded
Test::Unit::Loader(3)
unit testing framework helper class
Tickit::Widgets(3), "Tickit::Widgets"(3)
load several Tickit::Widget classes at once
Tk::JPEG(3)
JPEG loader for Tk::Photo
Tk::JPEG::Lite(3)
lite JPEG loader for Tk::Photo
Tk::PNG(3)
PNG loader for Tk::Photo
Tk::WinPhoto(3)
Load a Photo image from a window
Tk::widgets(3)
preload widget classes
Toadfarm::Command::reload(3)
Reload a Toadfarm DSL script
ToolSet(3)
Load your commonly-used modules in a single import
Tree::Simple::Visitor::LoadClassHierarchy(3)
A Visitor for loading class hierarchies into a Tree::Simple hierarchy
Tree::Simple::Visitor::LoadDirectoryTree(3)
A Visitor for loading the contents of a directory into a Tree::Simple object
Type::Tiny::_HalfOp(3)
half-completed overloaded operation
UML::Class::Simple(3)
Render simple UML class diagrams, by loading the code
Ubic::ServiceLoader(3)
load service from file
Ubic::ServiceLoader::Base(3)
abstract base class for service loaders
Ubic::ServiceLoader::Default(3)
default service loader
Ubic::ServiceLoader::Ext::ini(3)
loader for ini-style configs
Ubic::ServiceLoader::Ext::json(3)
loader for json-style configs
Unix::Statgrab::sg_load_stats(3)
container for libstatgrab load average statistics
Unix::Uptime(3)
Determine the current uptime, in seconds, and load averages, across different *NIX architectures
VM::EC2(3)
Perl interface to Amazon EC2, Virtual Private Cloud, Elastic Load Balancing, Autoscaling, and Relational Database services
VM::EC2::ELB(3)
-- Object describing an Elastic Load Balancer
VM::EC2::ELB::Attributes(3), VM::EC2::ELB:Attributes(3)
Object describing the attributes of an Elastic Load Balancer
VM::EC2::ELB::Attributes::AccessLog(3), VM::EC2::ELB:Attributes::AccessLog(3)
Object describing the AccessLog attributes of an Elastic Load Balancer
VM::EC2::ELB::Attributes::ConnectionDraining(3), VM::EC2::ELB:Attributes::ConnectionDraining(3)
Object describing the ConnectionDraining attribute of an Elastic Load Balancer
VM::EC2::ELB::Attributes::ConnectionSettings(3), VM::EC2::ELB:Attributes::ConnectionSettings(3)
Object describing the ConnectionSettings attribute of an Elastic Load Balancer
VM::EC2::ELB::Attributes::CrossZoneLoadBalancing(3), VM::EC2::ELB:Attributes::CrossZoneLoadBalancing(3)
Object describing the CrossZoneLoadBalancing attribute of an Elastic Load Balancer
VM::EC2::ELB::BackendServerDescription(3), VM::EC2::ELB:BackendServerDescription(3)
Load Balancer Backend Server Description
VM::EC2::ELB::HealthCheck(3), VM::EC2::ELB:HealthCheck(3)
Load Balancer Health Check Parameters
VM::EC2::ELB::InstanceState(3), VM::EC2::ELB:InstanceState(3)
Object describing the state of an instance attached to a load balancer. It is the result of a DescribeInstanceHealth API call
VM::EC2::ELB::Listener(3), VM::EC2::ELB:Listener(3)
Elastic Load Balancer Listener
VM::EC2::ELB::ListenerDescription(3), VM::EC2::ELB:ListenerDescription(3)
Load Balancer Listener Description
VM::EC2::ELB::Policies(3), VM::EC2::ELB:Policies(3)
Elastic Load Balancer Policies
VM::EC2::ELB::Policies::LBCookieStickinessPolicy(3)
Object describing a Load Balancer Cookie Stickiness Policy
VM::EC2::ELB::PolicyAttribute(3)
Elastic Load Balancer Policy Attribute
VM::EC2::ELB::PolicyAttributeType(3)
Load Balancer Policy Attribute Type
VM::EC2::ELB::PolicyDescription(3)
Load Balancer Policy
VM::EC2::ELB::PolicyTypeDescription(3)
Elastic Load Balancer Policy Type
VM::EC2::ELB::TagDescription(3), VM::EC2::ELB:TagDescription(3)
Load Balancer Tag Description
Validator::Custom::Constraints(3)
Constraint autoloading system
Vimana::Command::Download(3)
download a vim plugin package
WWW::BitTorrent(3)
Search and Download .torrent(s) files from BitTorrents boards
WWW::Hotmail(3)
Connect to Hotmail, download, delete and send messages
WWW::Mechanize::Plugin::HelloWorld(3)
a sample WWW::Mechanize::Pluggable plugin -head1 SYNOPSIS use WWW::Mechanize::Pluggable; # This module is automatically loaded into WWW::Mechanize::Pluggable
WWW::NicoVideo::Download(3)
Download FLV/MP4/SWF files from nicovideo.jp
WWW::SourceForge(3)
Interface to SourceForge's APIs - http://sourceforge.net/p/forge/documentation/API/ and https://sourceforge.net/p/forge/documentation/Download%20Stats%20API/
WebService::GData::Serialize(3)
Factory class that loads the proper serialize package
WebService::GData::YouTube::Doc::BrowserBasedUpload(3)
YouTube Video browser based upload system
XML::Pastor::NodeArray(3)
An array class of hashes that has magical properties via overloading and AUTOLOAD
XML::SAX::ExpatXS::Preload(3)
Helper class for XML-SAX-ExpatXS
XML::Toolkit::Loader(3)
A set of tools for Loading XML into Moose Objects
XML::Toolkit::Loader::Filter(3)
A class to
XMLTV::Supplement(3)
Supplementary file loader for XMLTV grabbers
XSLoader(3)
Dynamically load C libraries into Perl code
YAML::Loader(3)
YAML class for loading Perl objects to YAML
YAML::Loader::Base(3)
Base class for YAML Loader classes
YAML::PP::Perl(3)
Convenience module for loading and dumping Perl objects
YAML::PP::Schema::Binary(3)
Schema for loading and binary data
YAML::Syck(3)
Fast, lightweight YAML loader and dumper
allocimage(3), allocimagemix(3), freeimage(3), nameimage(3), namedimage(3), setalpha(3), loadimage(3), cloadimage(3), unloadimage(3), readimage(3), writeimage(3), bytesperline(3), wordsperline(3)
allocating, freeing, reading, writing images
anongitssh(1)
restricted shell for git-upload-pack over SSH
autouse(3)
postpone load of modules until a function is used
bdf2gdfont.pl(1)
Convert X11 "BDF" fonts into a loadable font format for GD
bp_download_query_genbank(1)
script to query Genbank and retrieve records
bp_seqpart(1), bp_seqpart.pl(1)
Takes one or more sequence files and splits them into a number of load balanced files
cachechars(3), agefont(3), loadchar(3), Subfont(3), Fontchar(3), Font (3)
font utilities
cargo-publish(1)
Upload a package to the registry
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
clipbrowse(1)
Load a URL from the clipboard into your browser
cpan-upload(1)
upload a distribution to the CPAN
cpan-upload-http(1)
upload one or more files to CPAN, using PAUSE
cpu_sup(3)
A CPU Load and CPU Utilization Supervisor Process
cxxmatrix(1), C++ Matrix(1)
The Matrix Reloaded in Terminals
dbicdump(1)
Dump a schema using DBIx::Class::Schema::Loader
dmarc_update_public_suffix_list(1)
command line tool to download updated public suffix list
download-entities.pl(1), download-entities(1)
download and parse XML Entity definitions
download-entities.pl(3pm), download-entities(3pm)
download and parse XML Entity definitions
dtsession_res(1)
CDE dtsession resource load utility
dtsrindex(1)
Load inverted index for document objects
dtsrload(1)
Load document objects in a database
erl_ddll(3)
Dynamic driver loader and linker
erl_prim_loader(3)
Low Level Erlang Loader
erl_prim_loader(3)
Low-level Erlang loader
fbgamma(1)
load a gamma correcting colormap
feersum(1)
feersum app loader
flickr_upload(1)
Upload photos to "flickr.com"
funcsave(1)
save the definition of a function to the user's autoload directory
g.extension(1), g.extension (1)
Maintains GRASS Addons extensions in local GRASS installation. Downloads and installs extensions from GRASS Addons repository or other source into the local GRASS installation or removes installed extensions
gallery-dl(1)
download image-galleries and -collections
install(5)
Download and Install npm
jQuery::File::Upload(3)
Server-side solution for the jQuery File Upload <https://github.com/blueimp/jQuery-File-Upload/> plugin
kitty.conf(5)
kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2. You can reload the config file within kitty by pressing %ctrl+shift+f5 or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing the %ctrl+shift+f6 key. kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the kitty --config option or use the KITTY_CONFIG_DIRECTORY environment variable. See the kitty --config option for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. For example: 0.0 3.5 C include other.conf P
loadtk(nged)
Loads the initialization for the Tk window library
lwp-download(1)
Fetch large files from the web
mach-swap(3), beswap2(3), beswap4(3), beswap8(3), beieeeftoa32(3), beieeeftoa64(3), beieeeftoa80(3), beload2(3), beload4(3), beload8(3), leswap2(3), leswap4(3), leswap8(3), leieeeftoa32(3), leieeeftoa64(3), leieeeftoa80(3), leload2(3), leload4(3), leload8(3), ieeeftoa32(3), ieeeftoa64(3)
machine-independent access to byte-ordered data
memdraw(3), Memimage(3), Memdata(3), Memdrawparam(3), memimageinit(3), wordaddr(3), byteaddr(3), memimagemove(3), allocmemimage(3), allocmemimaged(3), readmemimage(3), creadmemimage(3), writememimage(3), freememimage(3), memsetchan(3), loadmemimage(3), cloadmemimage(3), unloadmemimage(3), memfillcolor(3), memarc(3), mempoly(3), memellipse(3), memfillpoly(3), memimageline(3), memimagedraw(3), drawclip(3), memlinebbox(3), memlineendsize(3), allocmemsubfont(3), openmemsubfont(3), freememsubfont(3), memsubfontwidth(3), getmemdefont(3), memimagestring(3), iprint(3), hwdraw(3)
drawing routines for memory-resident images
memdraw(3), memlalloc(3), memldelete(3), memlexpose(3), memlfree(3), memlhide(3), memline(3), memlnorefresh(3), memload(3), memunload(3), memlorigin(3), memlsetrefresh(3), memltofront(3), memltofrontn(3), memltorear(3), memltorearn(3)
windows of memory-resident images
mogupload(1)
-- Upload data to a MogileFS installation
os_mon_mib(3)
Loading and Unloading of OTP-OS-MON-MIB
overload(3)
Package for overloading Perl operations
overloading(3)
perl pragma to lexically control overloading
parl(1)
Binary PAR Loader
parse_test(1), boottool(1)
tool for modifying bootloader configuration
perlbal(1), Perlbal(1)
Reverse-proxy load balancer and webserver
pod::Prima::image-load(3), Prima::image-load(3)
Using image subsystem
podboat(1)
a podcast download manager for text terminals
pods::SDL::Mixer::Samples(3), SDL::Mixer::Samples(3)
functions for loading sound samples
pool(3)
Load distribution facility
prefork(3)
Optimized module loading for forking or non-forking processes
pscp(1)
parallel file upload program
psfonts(1), psdownload(1)
add necessary fonts to PostScript document for printing
pslurp(1)
parallel file download program
r.in.wms(1), r.in.wms (1)
Downloads and imports data from OGC WMS and OGC WMTS web mapping servers
relative(3)
Load modules with relative names
rschedule(1)
User interface for Perl Schedule::Load configuration and status
slchoosed(1)
Distributed load chooser for Perl Schedule::Load
slreportd(1)
Distributed load reporter for Perl Schedule::Load
sordi(1)
Load and re-serialise RDF data
test_configuration.pl(1)
Load your configuration to verify Nagios::Object is compatible with it. -c: path to your main configuration file -l: "relaxed" mode - allow unrecognized attributes on objects, default is strict
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
tt_session_types_load(3)
merge a compiled ToolTalk types file into the running ttsession
ttmedia_load(3)
send a Display, Edit or Compose request
ttmedia_load_reply(3)
reply to a Display, Edit or Compose request
uhd_image_loader(1)
UHD Image Loader
uhd_images_downloader(1)
USRP Hardware Driver firmware/FPGA downloader
v.net.distance(1), v.net.distance (1)
Computes shortest distance via the network between the given sets of features. Finds the shortest paths from each (cqfrom(cq point to the nearest (cqto(cq feature and various information about this relation are uploaded to the attribute table
v.rast.stats(1), v.rast.stats (1)
Calculates univariate statistics from a raster map based on a vector map and uploads statistics to new attribute columns
v.what.rast(1), v.what.rast (1)
Uploads raster values at positions of vector points to the table
v.what.rast3(1), v.what.rast3 (1)
Uploads 3D raster values at positions of vector points to the table
v.what.strds(1), v.what.strds (1)
Uploads space time raster dataset values at positions of vector points to the table
v.what.vect(1), v.what.vect (1)
Uploads vector values at positions of vector points to the table
zsync(1)
Partial/differential file download client over HTTP
home | help