FreeBSD Manual Pages

home | help

BUS_NEW_PASS(9): notify a bus that the pass level has been changed
bus_set_pass(9): raise the bus pass level
def_prog_mode(3), def_shell_mode(3), reset_prog_mode(3), reset_shell_mode(3), resetty(3), savetty(3), getsyx(3), setsyx(3), ripoffline(3), curs_set(3), napms(3): low-level curses routines
freebsd-version(1): print the version and patch level of the installed system
ibstat(8), IBSTAT(8): rst2man-indent-level 0 1 rstReportMargin \$1






krb5_auth_con_addflags(3), krb5_auth_con_free(3), krb5_auth_con_genaddrs(3), krb5_auth_con_generatelocalsubkey(3), krb5_auth_con_getaddrs(3), krb5_auth_con_getauthenticator(3), krb5_auth_con_getflags(3), krb5_auth_con_getkey(3), krb5_auth_con_getlocalsubkey(3), krb5_auth_con_getrcache(3), krb5_auth_con_getremotesubkey(3), krb5_auth_con_getuserkey(3), krb5_auth_con_init(3), krb5_auth_con_initivector(3), krb5_auth_con_removeflags(3), krb5_auth_con_setaddrs(3), krb5_auth_con_setaddrs_from_fd(3), krb5_auth_con_setflags(3), krb5_auth_con_setivector(3), krb5_auth_con_setkey(3), krb5_auth_con_setlocalsubkey(3), krb5_auth_con_setrcache(3), krb5_auth_con_setremotesubkey(3), krb5_auth_con_setuserkey(3), krb5_auth_context(3), krb5_auth_getcksumtype(3), krb5_auth_getkeytype(3), krb5_auth_getlocalseqnumber(3), krb5_auth_getremoteseqnumber(3), krb5_auth_setcksumtype(3), krb5_auth_setkeytype(3), krb5_auth_setlocalseqnumber(3), krb5_auth_setremoteseqnumber(3), krb5_free_authenticator(3): manage authentication on connection level
lge(4): Level 1 LXT1001 NetCellerator PCI Gigabit Ethernet adapter driver
link_addr(3), link_ntoa(3): elementary address specification routines for link level access
mac_mls(4): Multi-Level Security confidentiality policy
pthread_getconcurrency(3), pthread_setconcurrency(3): get or set level of concurrency
securelevel_gt(9), securelevel_ge(9): test active securelevel
sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3): lookup name of various enumerated values
ECDSA_SIG_get0(3), ECDSA_SIG_get0_r(3), ECDSA_SIG_get0_s(3), ECDSA_SIG_set0(3), ECDSA_SIG_new(3), ECDSA_SIG_free(3), ECDSA_size(3), ECDSA_sign(3), ECDSA_do_sign(3), ECDSA_verify(3), ECDSA_do_verify(3), ECDSA_sign_setup(3), ECDSA_sign_ex(3), ECDSA_do_sign_ex(3): low-level elliptic curve digital signature algorithm (ECDSA) functions
RSA_private_encrypt(3), RSA_public_decrypt(3): low-level signature operations
SSL_CTX_set_security_level(3), SSL_set_security_level(3), SSL_CTX_get_security_level(3), SSL_get_security_level(3), SSL_CTX_set_security_callback(3), SSL_set_security_callback(3), SSL_CTX_get_security_callback(3), SSL_get_security_callback(3), SSL_CTX_set0_security_ex_data(3), SSL_set0_security_ex_data(3), SSL_CTX_get0_security_ex_data(3), SSL_get0_security_ex_data(3): SSL/TLS security framework
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_set1_ip_asc(3): X509 verification parameters
evp(7): high-level cryptographic functions
"glGetTexLevelParameterfv(3), glGetTexLevelParameteriv(3): return texture parameter values for a specific level of detail
AES_set_encrypt_key(3), AES_set_decrypt_key(3), AES_encrypt(3), AES_decrypt(3), AES_cbc_encrypt(3): low-level interface to the AES symmetric cipher
AG_Driver(3): agar low-level driver interface
AG_EventLoop(3): agar low-level event loop
AG_GLView(3): low-level OpenGL context widget
ALTER_POLICY(7): change the definition of a row-level security policy
CREATE_POLICY(7): define a new row-level security policy for a table
CURLOPT_KRBLEVEL(3): FTP kerberos security level
DPMSForceLevel(3): forces a DPMS capable display into the specified power level
DROP_POLICY(7): remove a row-level security policy from a table
ECDSA_SIG_get0(3), ECDSA_SIG_get0_r(3), ECDSA_SIG_get0_s(3), ECDSA_SIG_set0(3), ECDSA_SIG_new(3), ECDSA_SIG_free(3), ECDSA_size(3), ECDSA_sign(3), ECDSA_do_sign(3), ECDSA_verify(3), ECDSA_do_verify(3), ECDSA_sign_setup(3), ECDSA_sign_ex(3), ECDSA_do_sign_ex(3): low-level elliptic curve digital signature algorithm (ECDSA) functions
ECDSA_SIG_get0(3ossl), ECDSA_SIG_get0_r(3ossl), ECDSA_SIG_get0_s(3ossl), ECDSA_SIG_set0(3ossl), ECDSA_SIG_new(3ossl), ECDSA_SIG_free(3ossl), ECDSA_size(3ossl), ECDSA_sign(3ossl), ECDSA_do_sign(3ossl), ECDSA_verify(3ossl), ECDSA_do_verify(3ossl), ECDSA_sign_setup(3ossl), ECDSA_sign_ex(3ossl), ECDSA_do_sign_ex(3ossl): low-level elliptic curve digital signature algorithm (ECDSA) functions
MPI_Get_count(3): Gets the number of "top level" elements
MPI_Query_thread(3): Return the level of thread support provided by the MPI library
OSSL_HTTP_REQ_CTX(3ossl), OSSL_HTTP_REQ_CTX_new(3ossl), OSSL_HTTP_REQ_CTX_free(3ossl), OSSL_HTTP_REQ_CTX_set_request_line(3ossl), OSSL_HTTP_REQ_CTX_add1_header(3ossl), OSSL_HTTP_REQ_CTX_set_expected(3ossl), OSSL_HTTP_REQ_CTX_set1_req(3ossl), OSSL_HTTP_REQ_CTX_nbio(3ossl), OSSL_HTTP_REQ_CTX_nbio_d2i(3ossl), OSSL_HTTP_REQ_CTX_exchange(3ossl), OSSL_HTTP_REQ_CTX_get0_mem_bio(3ossl), OSSL_HTTP_REQ_CTX_get_resp_len(3ossl), OSSL_HTTP_REQ_CTX_set_max_response_length(3ossl), OSSL_HTTP_is_alive(3ossl): HTTP client low-level functions
OSSL_HTTP_open(3ossl), OSSL_HTTP_bio_cb_t(3ossl), OSSL_HTTP_proxy_connect(3ossl), OSSL_HTTP_set1_request(3ossl), OSSL_HTTP_exchange(3ossl), OSSL_HTTP_get(3ossl), OSSL_HTTP_transfer(3ossl), OSSL_HTTP_close(3ossl): HTTP client high-level functions
RSA_private_encrypt(3), RSA_public_decrypt(3): low-level signature operations
RSA_private_encrypt(3ossl), RSA_public_decrypt(3ossl): low-level signature operations
SSL_CTX_set_security_level(3), SSL_set_security_level(3), SSL_CTX_get_security_level(3), SSL_get_security_level(3), SSL_CTX_set_security_callback(3), SSL_set_security_callback(3), SSL_CTX_get_security_callback(3), SSL_get_security_callback(3), SSL_CTX_set0_security_ex_data(3), SSL_set0_security_ex_data(3), SSL_CTX_get0_security_ex_data(3), SSL_get0_security_ex_data(3): SSL/TLS security framework
SSL_CTX_set_security_level(3ossl), SSL_set_security_level(3ossl), SSL_CTX_get_security_level(3ossl), SSL_get_security_level(3ossl), SSL_CTX_set_security_callback(3ossl), SSL_set_security_callback(3ossl), SSL_CTX_get_security_callback(3ossl), SSL_get_security_callback(3ossl), SSL_CTX_set0_security_ex_data(3ossl), SSL_set0_security_ex_data(3ossl), SSL_CTX_get0_security_ex_data(3ossl), SSL_get0_security_ex_data(3ossl): SSL/TLS security framework
SSL_QUIC_METHOD(3ossl), OSSL_ENCRYPTION_LEVEL(3ossl), SSL_CTX_set_quic_method(3ossl), SSL_set_quic_method(3ossl), SSL_set_quic_transport_params(3ossl), SSL_get_peer_quic_transport_params(3ossl), SSL_quic_max_handshake_flight_len(3ossl), SSL_quic_read_level(3ossl), SSL_quic_write_level(3ossl), SSL_provide_quic_data(3ossl), SSL_process_quic_post_handshake(3ossl), SSL_is_quic(3ossl), SSL_get_peer_quic_transport_version(3ossl), SSL_get_quic_transport_version(3ossl), SSL_set_quic_transport_version(3ossl), SSL_set_quic_use_legacy_codepoint(3ossl), SSL_set_quic_early_data_enabled(3ossl): QUIC support
Str(3o): Regular expressions and high-level string processing
Sympa::DataSource::LDAP2(3Sympa): Data source based on LDAP with two-level search operations
Tk_Attributes.tk85(3), Tk_WindowId(3), Tk_Parent(3), Tk_Display(3), Tk_DisplayName(3), Tk_ScreenNumber(3), Tk_Screen(3), Tk_X(3), Tk_Y(3), Tk_Width(3), Tk_Height(3), Tk_Changes(3), Tk_Attributes(3), Tk_IsContainer(3), Tk_IsEmbedded(3), Tk_IsMapped(3), Tk_IsTopLevel(3), Tk_ReqWidth(3), Tk_ReqHeight(3), Tk_MinReqWidth(3), Tk_MinReqHeight(3), Tk_InternalBorderLeft(3), Tk_InternalBorderRight(3), Tk_InternalBorderTop(3), Tk_InternalBorderBottom(3), Tk_Visual(3), Tk_Depth(3), Tk_Colormap(3), Tk_Interp (3): retrieve information from Tk's local data structure
Tk_Attributes.tk86(3), Tk_WindowId(3), Tk_Parent(3), Tk_Display(3), Tk_DisplayName(3), Tk_ScreenNumber(3), Tk_Screen(3), Tk_X(3), Tk_Y(3), Tk_Width(3), Tk_Height(3), Tk_Changes(3), Tk_Attributes(3), Tk_IsContainer(3), Tk_IsEmbedded(3), Tk_IsMapped(3), Tk_IsTopLevel(3), Tk_ReqWidth(3), Tk_ReqHeight(3), Tk_MinReqWidth(3), Tk_MinReqHeight(3), Tk_InternalBorderLeft(3), Tk_InternalBorderRight(3), Tk_InternalBorderTop(3), Tk_InternalBorderBottom(3), Tk_Visual(3), Tk_Depth(3), Tk_Colormap(3), Tk_Interp (3): retrieve information from Tk's local data structure
Tk_MoveToplevelWindow.tk85(3), Tk_MoveToplevelWindow(3): Adjust the position of a top-level window
Tk_MoveToplevelWindow.tk86(3), Tk_MoveToplevelWindow(3): Adjust the position of a top-level window
TopLevelShell(3): The TopLevelShell widget class "TopLevelShell" "widget class" "TopLevelShell"
Toplevel(n): base class for mega-widgets in a top-level window
WildMidi_MasterVolume(3): sets the overall audio level of the library
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_set1_ip_asc(3): X509 verification parameters
X509_VERIFY_PARAM_set_flags(3ossl), X509_VERIFY_PARAM_clear_flags(3ossl), X509_VERIFY_PARAM_get_flags(3ossl), X509_VERIFY_PARAM_set_purpose(3ossl), X509_VERIFY_PARAM_get_inh_flags(3ossl), X509_VERIFY_PARAM_set_inh_flags(3ossl), X509_VERIFY_PARAM_set_trust(3ossl), X509_VERIFY_PARAM_set_depth(3ossl), X509_VERIFY_PARAM_get_depth(3ossl), X509_VERIFY_PARAM_set_auth_level(3ossl), X509_VERIFY_PARAM_get_auth_level(3ossl), X509_VERIFY_PARAM_set_time(3ossl), X509_VERIFY_PARAM_get_time(3ossl), X509_VERIFY_PARAM_add0_policy(3ossl), X509_VERIFY_PARAM_set1_policies(3ossl), X509_VERIFY_PARAM_get0_host(3ossl), X509_VERIFY_PARAM_set1_host(3ossl), X509_VERIFY_PARAM_add1_host(3ossl), X509_VERIFY_PARAM_set_hostflags(3ossl), X509_VERIFY_PARAM_get_hostflags(3ossl), X509_VERIFY_PARAM_get0_peername(3ossl), X509_VERIFY_PARAM_get0_email(3ossl), X509_VERIFY_PARAM_set1_email(3ossl), X509_VERIFY_PARAM_set1_ip(3ossl), X509_VERIFY_PARAM_get1_ip_asc(3ossl), X509_VERIFY_PARAM_set1_ip_asc(3ossl): X509 verification parameters
X509_policy_tree_level_count(3), X509_policy_tree_get0_level(3), X509_policy_level_node_count(3), X509_policy_level_get0_node(3), X509_policy_node_get0_policy(3), X509_policy_node_get0_qualifiers(3), X509_policy_node_get0_parent(3): inspect X.509 policy tree objects
XIconifyWindow(3), XWithdrawWindow(3), XReconfigureWMWindow(3): manipulate top-level windows
XkbAddGeomDoodad(3): Add one doodad to a section of a keyboard geometry or to the top-level geometry
XkbKeyActionEntry(3): Returns a pointer to the key action corresponding to group grp and shift level lvl from the two-dimensional table of key actions associated with the key corresponding to keycode
XkbKeySymEntry(3): Returns the keysym corresponding to shift level shift and group grp from the two-dimensional array of keysyms for the key corresponding to keycode
XkbKeycodeToKeysym(3): Finds the keysym bound to a particular key at a specified group and shift level
XkbResizeKeyType(3): Change the number of levels in a key type
XmtBuildToplevel(3), XmtBuildToplevel()(3), XmtBuildQueryToplevel()(3): create a TopLevelShell widget and all of its descendants
XmtGetShell(3), XmtGetShell()(3), XmtGetApplicationShell()(3), XmtGetTopLevelShell()(3): return shell ancestors of a widget
XtAppCreateShell(3), XtVaAppCreateShell(3): create top-level widget instance
XtAppError(3), XtAppSetErrorHandler(3), XtAppSetWarningHandler(3), XtAppWarning(3): low-level error handlers
XtAppErrorMsg(3), XtAppSetErrorMsgHandler(3), XtAppSetWarningMsgHandler(3), XtAppWarningMsg(3): high-level error handlers
XtClass(3), XtSuperclass(3), XtIsSubclass(3), XtCheckSubclass(3), XtIsObject(3), XtIsRectObj(3), XtIsWidget(3), XtIsComposite(3), XtIsConstraint(3), XtIsShell(3), XtIsOverrideShell(3), XtIsWMShell(3), XtIsVendorShell(3), XtIsTransientShell(3), XtIsTopLevelShell(3), XtIsApplicationShell(3), XtIsSessionShell(3): obtain and verify a widget's class
XtCreateApplicationShell(3): create top-level widget instance
XtError(3), XtSetErrorHandler(3), XtSetWarningHandler(3), XtWarning(3): low-level error handlers
XtErrorMsg(3), XtSetErrorMsgHandler(3), XtWarningMsg(3), XtSetWarningMsgHandler(3): high-level error handlers
al_findfirst(3): Low-level function for searching files. Allegro game programming library
amrestore(8): low-level data-extraction from Amanda volumes
ansible(1): Define and run a single task 'playbook' against a set of hosts rst2man-indent-level 0 1 rstReportMargin \$1






ansible-config(1): View ansible configuration. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-console(1): REPL console for executing Ansible tasks. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-doc(1): plugin documentation tool rst2man-indent-level 0 1 rstReportMargin \$1






ansible-galaxy(1): Perform various Role and Collection related operations. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-inventory(1): None rst2man-indent-level 0 1 rstReportMargin \$1






ansible-playbook(1): Runs Ansible playbooks, executing the defined tasks on the targeted hosts. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-pull(1): pulls playbooks from a VCS repo and executes them for the local host rst2man-indent-level 0 1 rstReportMargin \$1






ansible-vault(1): encryption/decryption utility for Ansible data files rst2man-indent-level 0 1 rstReportMargin \$1






argc.tcl86(n), argc(n), argv(n), argv0(n), auto_path(n), env(n), errorCode(n), errorInfo(n), tcl_interactive(n), tcl_library(n), tcl_nonwordchars(n), tcl_patchLevel(n), tcl_pkgPath(n), tcl_platform(n), tcl_precision(n), tcl_rcFileName(n), tcl_traceCompile(n), tcl_traceExec(n), tcl_wordchars(n), tcl_version(n): Variables used by Tcl
argc.tcl87(n), argc(n), argv(n), argv0(n), auto_path(n), env(n), errorCode(n), errorInfo(n), tcl_interactive(n), tcl_library(n), tcl_nonwordchars(n), tcl_patchLevel(n), tcl_pkgPath(n), tcl_platform(n), tcl_precision(n), tcl_rcFileName(n), tcl_traceCompile(n), tcl_traceExec(n), tcl_wordchars(n), tcl_version(n): Variables used by Tcl
aria2c(1): The ultra fast download utility rst2man-indent-level 0 1 rstReportMargin \$1






automx-test(1): automx command line client rst2man-indent-level 0 1 rstReportMargin \$1






automx.conf(5): automx configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1






automx_ldap(5): automx LDAP backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1






automx_script(5): automx script backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1






automx_sql(5): automx SQL backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1






bareos-dbcopy(8): bareos-dbcopy rst2man-indent-level 0 1 rstReportMargin \$1






battmond(1): monitor battery level on ACPI-enabled (laptop) computers
beet(1): music tagger and library organizer rst2man-indent-level 0 1 rstReportMargin \$1






beetsconfig(5): beets configuration file rst2man-indent-level 0 1 rstReportMargin \$1






biolibc(3), BIOLIBC(3): Library of high-performance low-level functions for bioinformatics programming
byobu-ulevel(1), byobu-ulevel (1): helper script for notification level indicators
ceylon(1): The top level Ceylon tool is used to execute other Ceylon tools
cgiDebug(3): Set the debug level for CGI programming
coap_logging(3), coap_log(3), coap_get_log_level(3), coap_set_log_level(3), coap_set_log_handler(3), coap_package_name(3), coap_package_version(3), coap_set_show_pdu_output(3), coap_show_pdu(3): Work with CoAP logging
complex16_blas_level1(3): complex16
complex16_blas_level2(3): complex16
complex16_blas_level3(3): complex16
complex_blas_level1(3): complex
complex_blas_level2(3): complex
complex_blas_level3(3): complex
coqtop(1): The Coq Proof Assistant toplevel system
coqtop.byte(1): The bytecode Coq toplevel
coqtop.opt(1): The native-code Coq toplevel
critcl_callback(n), critcl::callback(n): CriTcl C-level Callback Utilities
critcl_cutil(n), critcl::cutil(n): CriTcl C-level Utilities
cual(6), Cual(6): Cuyo Animation Language Cual is the main language used to describe the animations in cuyo. Strictly speaking it's the stuff between the << >> brackets in the level description files (xxx.ld). On the other hand this man page aims at being a complete description of how to write levels for cuyo. But it's still under construction. See the file "example.ld" to get an idea of how the rest of the level description works. There's also a bit of example Cual code in "example.ld". And of course, all the existing levels are examples. Note that Cual is probably still very buggy. So if strange things happen and you're sure it's not your fault, tell me (cuyo@karimmi.de)
cyrus.conf(5): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






czmq(7): Overview of The high-level C binding for 0MQ
dahdi_monitor(8): checks the rx/tx levels of DAHDI channels
dbh_find(3): Find the top level subtree FILE_POINTER
dbwrap_tool(1): low level TDB/CTDB manipulation tool using the dbwrap interface
def_prog_mode(3x), def_shell_mode(3x), reset_prog_mode(3x), reset_shell_mode(3x), resetty(3x), savetty(3x), getsyx(3x), setsyx(3x), ripoffline(3x), curs_set(3x), napms(3x): low-level curses routines
django-admin(1): Utility script for the Django web framework rst2man-indent-level 0 1 rstReportMargin \$1






double_blas_level1(3): double
double_blas_level2(3): double
double_blas_level3(3): double
dskdump(1): Sector-level copy from one floppy or image file to another
evp(3): high level cryptographic functions
evp(7): high-level cryptographic functions
evp(7ossl): high-level cryptographic functions
exfalso(1): audio tag editor rst2man-indent-level 0 1 rstReportMargin \$1






faxwatch(8c): monitor low-level server actions
fribidi_get_par_embedding_levels(3): get bidi embedding levels of a paragraph
fribidi_get_par_embedding_levels_ex(3): get bidi embedding levels of a paragraph
fribidi_log2vis_get_embedding_levels(3): get embedding levels
ftp-proxy(8): application level proxy for the FTP protocol
g-ir-compiler(1): Typelib compiler rst2man-indent-level 0 1 rstReportMargin \$1






g-ir-doc-tool(1): Documentation builder rst2man-indent-level 0 1 rstReportMargin \$1






g-ir-generate(1): Typelib generator rst2man-indent-level 0 1 rstReportMargin \$1






g-ir-scanner(1): Extracting C metadata from sources and headers rst2man-indent-level 0 1 rstReportMargin \$1






gammu(1): Does some neat things with your cellular phone or modem. rst2man-indent-level 0 1 rstReportMargin \$1






gammu-backup(5): gammu(1) backup file format. rst2man-indent-level 0 1 rstReportMargin \$1






gammu-config(1): Gammu configurator rst2man-indent-level 0 1 rstReportMargin \$1






gammu-detect(1): Gammu device detection rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsbackup(5): gammu(1) SMS backup file format. rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd(1): SMS daemon for Gammu rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-dbi(7): gammu-smsd(1) backend using DBI abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-files(7): gammu-smsd(1) backend using filesystem as a message storage rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-inject(1): Inject messages into queue of SMS daemon for Gammu rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-monitor(1): Monitor state of SMS daemon for Gammu rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-mysql(7): gammu-smsd(1) backend using MySQL database server as a message storage rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-null(7): gammu-smsd(1) backend not storing messages rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-odbc(7): gammu-smsd(1) backend using ODBC abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-pgsql(7): gammu-smsd(1) backend using PostgreSQL database server as a message storage rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-run(7): documentation for RunOnReceive directive rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-sql(7): gammu-smsd(1) backend using SQL abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsd-tables(7): description of tables for database backends of gammu-smsd(1) rst2man-indent-level 0 1 rstReportMargin \$1






gammu-smsdrc(5): gammu-smsd(1) configuration file rst2man-indent-level 0 1 rstReportMargin \$1






gammurc(5): gammu(1) configuration file rst2man-indent-level 0 1 rstReportMargin \$1






gdedit(6), - gdedit(6): Level editor for golddig
geometry.tk86(n), geometry(n), tk_library(n), tk_patchLevel(n), tk_strictMotif(n), tk_version(n): Variables used or set by Tk
git-annex-semitrust(1): return repository to default trust level
glances(1): An eye on your system rst2man-indent-level 0 1 rstReportMargin \$1






glutCreateWindow(3): creates a top-level window
glutSetWindowTitle(3), glutSetIconTitle(3): change the window or icon title respectively of the current top-level window
gmx(1): molecular dynamics simulation suite rst2man-indent-level 0 1 rstReportMargin \$1






gmx-anaeig(1): Analyze eigenvectors/normal modes rst2man-indent-level 0 1 rstReportMargin \$1






gmx-analyze(1): Analyze data sets rst2man-indent-level 0 1 rstReportMargin \$1






gmx-angle(1): Calculate distributions and correlations for angles and dihedrals rst2man-indent-level 0 1 rstReportMargin \$1






gmx-awh(1): Extract data from an accelerated weight histogram (AWH) run rst2man-indent-level 0 1 rstReportMargin \$1






gmx-bar(1): Calculate free energy difference estimates through Bennett's acceptance ratio rst2man-indent-level 0 1 rstReportMargin \$1






gmx-bundle(1): Analyze bundles of axes, e.g., helices rst2man-indent-level 0 1 rstReportMargin \$1






gmx-check(1): Check and compare files rst2man-indent-level 0 1 rstReportMargin \$1






gmx-chi(1): Calculate everything you want to know about chi and other dihedrals rst2man-indent-level 0 1 rstReportMargin \$1






gmx-cluster(1): Cluster structures rst2man-indent-level 0 1 rstReportMargin \$1






gmx-clustsize(1): Calculate size distributions of atomic clusters rst2man-indent-level 0 1 rstReportMargin \$1






gmx-confrms(1): Fit two structures and calculates the RMSD rst2man-indent-level 0 1 rstReportMargin \$1






gmx-convert-tpr(1): Make a modifed run-input file rst2man-indent-level 0 1 rstReportMargin \$1






gmx-convert-trj(1): Converts between different trajectory types rst2man-indent-level 0 1 rstReportMargin \$1






gmx-covar(1): Calculate and diagonalize the covariance matrix rst2man-indent-level 0 1 rstReportMargin \$1






gmx-current(1): Calculate dielectric constants and current autocorrelation function rst2man-indent-level 0 1 rstReportMargin \$1






gmx-density(1): Calculate the density of the system rst2man-indent-level 0 1 rstReportMargin \$1






gmx-densmap(1): Calculate 2D planar or axial-radial density maps rst2man-indent-level 0 1 rstReportMargin \$1






gmx-densorder(1): Calculate surface fluctuations rst2man-indent-level 0 1 rstReportMargin \$1






gmx-dielectric(1): Calculate frequency dependent dielectric constants rst2man-indent-level 0 1 rstReportMargin \$1






gmx-dipoles(1): Compute the total dipole plus fluctuations rst2man-indent-level 0 1 rstReportMargin \$1






gmx-disre(1): Analyze distance restraints rst2man-indent-level 0 1 rstReportMargin \$1






gmx-distance(1): Calculate distances between pairs of positions rst2man-indent-level 0 1 rstReportMargin \$1






gmx-do_dssp(1): Assign secondary structure and calculate solvent accessible surface area rst2man-indent-level 0 1 rstReportMargin \$1






gmx-dos(1): Analyze density of states and properties based on that rst2man-indent-level 0 1 rstReportMargin \$1






gmx-dump(1): Make binary files human readable rst2man-indent-level 0 1 rstReportMargin \$1






gmx-dyecoupl(1): Extract dye dynamics from trajectories rst2man-indent-level 0 1 rstReportMargin \$1






gmx-editconf(1): Convert and manipulates structure files rst2man-indent-level 0 1 rstReportMargin \$1






gmx-eneconv(1): Convert energy files rst2man-indent-level 0 1 rstReportMargin \$1






gmx-enemat(1): Extract an energy matrix from an energy file rst2man-indent-level 0 1 rstReportMargin \$1






gmx-energy(1): Writes energies to xvg files and display averages rst2man-indent-level 0 1 rstReportMargin \$1






gmx-extract-cluster(1): Allows extracting frames corresponding to clusters from trajectory rst2man-indent-level 0 1 rstReportMargin \$1






gmx-filter(1): Frequency filter trajectories, useful for making smooth movies rst2man-indent-level 0 1 rstReportMargin \$1






gmx-freevolume(1): Calculate free volume rst2man-indent-level 0 1 rstReportMargin \$1






gmx-gangle(1): Calculate angles rst2man-indent-level 0 1 rstReportMargin \$1






gmx-genconf(1): Multiply a conformation in 'random' orientations rst2man-indent-level 0 1 rstReportMargin \$1






gmx-genion(1): Generate monoatomic ions on energetically favorable positions rst2man-indent-level 0 1 rstReportMargin \$1






gmx-genrestr(1): Generate position restraints or distance restraints for index groups rst2man-indent-level 0 1 rstReportMargin \$1






gmx-grompp(1): Make a run input file rst2man-indent-level 0 1 rstReportMargin \$1






gmx-gyrate(1): Calculate the radius of gyration rst2man-indent-level 0 1 rstReportMargin \$1






gmx-h2order(1): Compute the orientation of water molecules rst2man-indent-level 0 1 rstReportMargin \$1






gmx-hbond(1): Compute and analyze hydrogen bonds rst2man-indent-level 0 1 rstReportMargin \$1






gmx-helix(1): Calculate basic properties of alpha helices rst2man-indent-level 0 1 rstReportMargin \$1






gmx-helixorient(1): Calculate local pitch/bending/rotation/orientation inside helices rst2man-indent-level 0 1 rstReportMargin \$1






gmx-help(1): Print help information rst2man-indent-level 0 1 rstReportMargin \$1






gmx-hydorder(1): Compute tetrahedrality parameters around a given atom rst2man-indent-level 0 1 rstReportMargin \$1






gmx-insert-molecules(1): Insert molecules into existing vacancies rst2man-indent-level 0 1 rstReportMargin \$1






gmx-lie(1): Estimate free energy from linear combinations rst2man-indent-level 0 1 rstReportMargin \$1






gmx-make_edi(1): Generate input files for essential dynamics sampling rst2man-indent-level 0 1 rstReportMargin \$1






gmx-make_ndx(1): Make index files rst2man-indent-level 0 1 rstReportMargin \$1






gmx-mdmat(1): Calculate residue contact maps rst2man-indent-level 0 1 rstReportMargin \$1






gmx-mdrun(1): Perform a simulation, do a normal mode analysis or an energy minimization rst2man-indent-level 0 1 rstReportMargin \$1






gmx-mindist(1): Calculate the minimum distance between two groups rst2man-indent-level 0 1 rstReportMargin \$1






gmx-mk_angndx(1): Generate index files for 'gmx angle' rst2man-indent-level 0 1 rstReportMargin \$1






gmx-msd(1): Calculates mean square displacements rst2man-indent-level 0 1 rstReportMargin \$1






gmx-nmeig(1): Diagonalize the Hessian for normal mode analysis rst2man-indent-level 0 1 rstReportMargin \$1






gmx-nmens(1): Generate an ensemble of structures from the normal modes rst2man-indent-level 0 1 rstReportMargin \$1






gmx-nmr(1): Analyze nuclear magnetic resonance properties from an energy file rst2man-indent-level 0 1 rstReportMargin \$1






gmx-nmtraj(1): Generate a virtual oscillating trajectory from an eigenvector rst2man-indent-level 0 1 rstReportMargin \$1






gmx-nonbonded-benchmark(1): Benchmarking tool for the non-bonded pair kernels. rst2man-indent-level 0 1 rstReportMargin \$1






gmx-order(1): Compute the order parameter per atom for carbon tails rst2man-indent-level 0 1 rstReportMargin \$1






gmx-pairdist(1): Calculate pairwise distances between groups of positions rst2man-indent-level 0 1 rstReportMargin \$1






gmx-pdb2gmx(1): Convert coordinate files to topology and FF-compliant coordinate files rst2man-indent-level 0 1 rstReportMargin \$1






gmx-pme_error(1): Estimate the error of using PME with a given input file rst2man-indent-level 0 1 rstReportMargin \$1






gmx-polystat(1): Calculate static properties of polymers rst2man-indent-level 0 1 rstReportMargin \$1






gmx-potential(1): Calculate the electrostatic potential across the box rst2man-indent-level 0 1 rstReportMargin \$1






gmx-principal(1): Calculate principal axes of inertia for a group of atoms rst2man-indent-level 0 1 rstReportMargin \$1






gmx-rama(1): Compute Ramachandran plots rst2man-indent-level 0 1 rstReportMargin \$1






gmx-rdf(1): Calculate radial distribution functions rst2man-indent-level 0 1 rstReportMargin \$1






gmx-report-methods(1): Write short summary about the simulation setup to a text file and/or to the standard output. rst2man-indent-level 0 1 rstReportMargin \$1






gmx-rms(1): Calculate RMSDs with a reference structure and RMSD matrices rst2man-indent-level 0 1 rstReportMargin \$1






gmx-rmsdist(1): Calculate atom pair distances averaged with power -2, -3 or -6 rst2man-indent-level 0 1 rstReportMargin \$1






gmx-rmsf(1): Calculate atomic fluctuations rst2man-indent-level 0 1 rstReportMargin \$1






gmx-rotacf(1): Calculate the rotational correlation function for molecules rst2man-indent-level 0 1 rstReportMargin \$1






gmx-rotmat(1): Plot the rotation matrix for fitting to a reference structure rst2man-indent-level 0 1 rstReportMargin \$1






gmx-saltbr(1): Compute salt bridges rst2man-indent-level 0 1 rstReportMargin \$1






gmx-sans(1): Compute small angle neutron scattering spectra rst2man-indent-level 0 1 rstReportMargin \$1






gmx-sasa(1): Compute solvent accessible surface area rst2man-indent-level 0 1 rstReportMargin \$1






gmx-saxs(1): Compute small angle X-ray scattering spectra rst2man-indent-level 0 1 rstReportMargin \$1






gmx-select(1): Print general information about selections rst2man-indent-level 0 1 rstReportMargin \$1






gmx-sham(1): Compute free energies or other histograms from histograms rst2man-indent-level 0 1 rstReportMargin \$1






gmx-sigeps(1): Convert c6/12 or c6/cn combinations to and from sigma/epsilon rst2man-indent-level 0 1 rstReportMargin \$1






gmx-solvate(1): Solvate a system rst2man-indent-level 0 1 rstReportMargin \$1






gmx-sorient(1): Analyze solvent orientation around solutes rst2man-indent-level 0 1 rstReportMargin \$1






gmx-spatial(1): Calculate the spatial distribution function rst2man-indent-level 0 1 rstReportMargin \$1






gmx-spol(1): Analyze solvent dipole orientation and polarization around solutes rst2man-indent-level 0 1 rstReportMargin \$1






gmx-tcaf(1): Calculate viscosities of liquids rst2man-indent-level 0 1 rstReportMargin \$1






gmx-traj(1): Plot x, v, f, box, temperature and rotational energy from trajectories rst2man-indent-level 0 1 rstReportMargin \$1






gmx-trajectory(1): Print coordinates, velocities, and/or forces for selections rst2man-indent-level 0 1 rstReportMargin \$1






gmx-trjcat(1): Concatenate trajectory files rst2man-indent-level 0 1 rstReportMargin \$1






gmx-trjconv(1): Convert and manipulates trajectory files rst2man-indent-level 0 1 rstReportMargin \$1






gmx-trjorder(1): Order molecules according to their distance to a group rst2man-indent-level 0 1 rstReportMargin \$1






gmx-tune_pme(1): Time mdrun as a function of PME ranks to optimize settings rst2man-indent-level 0 1 rstReportMargin \$1






gmx-vanhove(1): Compute Van Hove displacement and correlation functions rst2man-indent-level 0 1 rstReportMargin \$1






gmx-velacc(1): Calculate velocity autocorrelation functions rst2man-indent-level 0 1 rstReportMargin \$1






gmx-view(1): View a trajectory on an X-Windows terminal rst2man-indent-level 0 1 rstReportMargin \$1






gmx-wham(1): Perform weighted histogram analysis after umbrella sampling rst2man-indent-level 0 1 rstReportMargin \$1






gmx-wheel(1): Plot helical wheels rst2man-indent-level 0 1 rstReportMargin \$1






gmx-x2top(1): Generate a primitive topology from coordinates rst2man-indent-level 0 1 rstReportMargin \$1






gmx-xpm2ps(1): Convert XPM (XPixelMap) matrices to postscript or XPM rst2man-indent-level 0 1 rstReportMargin \$1






gnutls_global_set_log_level(3): API function
h2load(1): HTTP/2 benchmarking tool rst2man-indent-level 0 1 rstReportMargin \$1






hashkit_clone(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_crc32(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_create(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_fnv1_32(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_fnv1_64(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_fnv1a_32(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_fnv1a_64(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_free(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_functions(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_hsieh(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_is_allocated(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_jenkins(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_md5(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_murmur(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hashkit_value(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












hdf_obj_next(3), hdf_obj_next (3): Return the next node of a dataset level
heroeslvl(6): inspect Heroes' level files
hg(1): Mercurial source code management system rst2man-indent-level 0 1 rstReportMargin \$1






hgignore(5): syntax for Mercurial ignore files rst2man-indent-level 0 1 rstReportMargin \$1






hgrc(5): configuration files for Mercurial rst2man-indent-level 0 1 rstReportMargin \$1






hitch(8), Hitch(8): high performance TLS proxy rst2man-indent-level 0 1 rstReportMargin \$1






hitch.conf(5), Hitch.conf(5): Configuration file for Hitch rst2man-indent-level 0 1 rstReportMargin \$1






hotkernel(1): sample on-CPU kernel-level functions and modules
httptest(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






hwlocality_levels(3): Object levels, depths and types
hwlocality_levelzero(3): Interoperability with the oneAPI Level Zero interface
image_tesselation(3), image_tesselation (3): alter the tesselation level of a vid
imapd.conf(5): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






imclient(3): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






imtest(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






init_dialog(3): Low level initialisation of a dialog. Allegro game programming library
init_menu(3): Low level initialisation of a menu. Allegro game programming library
input_remap_translation(3), input_remap_translation (3): Reset or modify platform level keyboard translation
installsieve(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






irsim(1): An event-driven logic-level simulator for MOS circuits
jadmaker(1): JAD File Generator rst2man-indent-level 0 1 rstReportMargin \$1






k5identity(5): Kerberos V5 client principal selection rules rst2man-indent-level 0 1 rstReportMargin \$1






k5login(5): Kerberos V5 acl file for host access rst2man-indent-level 0 1 rstReportMargin \$1






k5srvutil(1): host key table (keytab) manipulation utility rst2man-indent-level 0 1 rstReportMargin \$1






kadm5.acl(5): Kerberos ACL file rst2man-indent-level 0 1 rstReportMargin \$1






kadmin(1): Kerberos V5 database administration program rst2man-indent-level 0 1 rstReportMargin \$1






kadmind(8): KADM5 administration server rst2man-indent-level 0 1 rstReportMargin \$1






kcatalogprint(8): Knot DNS catalog print utility rst2man-indent-level 0 1 rstReportMargin \$1






kdb5_ldap_util(8): Kerberos configuration utility rst2man-indent-level 0 1 rstReportMargin \$1






kdb5_util(8): Kerberos database maintenance utility rst2man-indent-level 0 1 rstReportMargin \$1






kdc.conf(5): Kerberos V5 KDC configuration file rst2man-indent-level 0 1 rstReportMargin \$1






kdestroy(1): destroy Kerberos tickets rst2man-indent-level 0 1 rstReportMargin \$1






kdig(1): Advanced DNS lookup utility rst2man-indent-level 0 1 rstReportMargin \$1






kea-admin(8): Shell script for managing Kea databases rst2man-indent-level 0 1 rstReportMargin \$1






kea-ctrl-agent(8): Control Agent process in Kea rst2man-indent-level 0 1 rstReportMargin \$1






kea-dhcp-ddns(8): DHCP-DDNS process in Kea rst2man-indent-level 0 1 rstReportMargin \$1






kea-dhcp4(8): DHCPv4 server in Kea rst2man-indent-level 0 1 rstReportMargin \$1






kea-dhcp6(8): DHCPv6 server in Kea rst2man-indent-level 0 1 rstReportMargin \$1






kea-lfc(8): Lease File Cleanup process in Kea rst2man-indent-level 0 1 rstReportMargin \$1






kea-netconf(8): NETCONF agent for configuring Kea rst2man-indent-level 0 1 rstReportMargin \$1






kea-shell(8): Text client for Control Agent process rst2man-indent-level 0 1 rstReportMargin \$1






keactrl(8): Shell script for managing Kea rst2man-indent-level 0 1 rstReportMargin \$1






kerberos(7): Overview of using Kerberos rst2man-indent-level 0 1 rstReportMargin \$1






keyboard_lowlevel_callback(3): User specified low level keyboard event handler. Allegro game programming library
keymgr(8): Knot DNS key management utility rst2man-indent-level 0 1 rstReportMargin \$1






khost(1): Simple DNS lookup utility rst2man-indent-level 0 1 rstReportMargin \$1






kinit(1): obtain and cache Kerberos ticket-granting ticket rst2man-indent-level 0 1 rstReportMargin \$1






kjournalprint(8): Knot DNS journal print utility rst2man-indent-level 0 1 rstReportMargin \$1






klist(1): list cached Kerberos tickets rst2man-indent-level 0 1 rstReportMargin \$1






knet_log_get_loglevel(3): Get the logging level for a subsystem
knet_log_get_loglevel_id(3): Get a logging level ID from its name
knet_log_get_loglevel_name(3): Get a logging level name from its numeric ID
knet_log_set_loglevel(3): Set the logging level for a subsystem
knot.conf(5): Knot DNS configuration file rst2man-indent-level 0 1 rstReportMargin \$1






knotc(8): Knot DNS control utility rst2man-indent-level 0 1 rstReportMargin \$1






knotd(8): Knot DNS server daemon rst2man-indent-level 0 1 rstReportMargin \$1






knsec3hash(1): Simple utility to compute NSEC3 hash rst2man-indent-level 0 1 rstReportMargin \$1






knsupdate(1): Dynamic DNS update utility rst2man-indent-level 0 1 rstReportMargin \$1






kpasswd(1): change a user's Kerberos password rst2man-indent-level 0 1 rstReportMargin \$1






kprop(8): propagate a Kerberos V5 principal database to a replica server rst2man-indent-level 0 1 rstReportMargin \$1






kpropd(8): Kerberos V5 replica KDC update server rst2man-indent-level 0 1 rstReportMargin \$1






kproplog(8): display the contents of the Kerberos principal update log rst2man-indent-level 0 1 rstReportMargin \$1






krb.equiv(5): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






krb5-config(1): tool for linking against MIT Kerberos libraries rst2man-indent-level 0 1 rstReportMargin \$1






krb5.conf(5): Kerberos configuration file rst2man-indent-level 0 1 rstReportMargin \$1






krb5_auth_con_addflags(3), krb5_auth_con_free(3), krb5_auth_con_genaddrs(3), krb5_auth_con_generatelocalsubkey(3), krb5_auth_con_getaddrs(3), krb5_auth_con_getauthenticator(3), krb5_auth_con_getflags(3), krb5_auth_con_getkey(3), krb5_auth_con_getlocalsubkey(3), krb5_auth_con_getrcache(3), krb5_auth_con_getremotesubkey(3), krb5_auth_con_getuserkey(3), krb5_auth_con_init(3), krb5_auth_con_initivector(3), krb5_auth_con_removeflags(3), krb5_auth_con_setaddrs(3), krb5_auth_con_setaddrs_from_fd(3), krb5_auth_con_setflags(3), krb5_auth_con_setivector(3), krb5_auth_con_setkey(3), krb5_auth_con_setlocalsubkey(3), krb5_auth_con_setrcache(3), krb5_auth_con_setremotesubkey(3), krb5_auth_con_setuserkey(3), krb5_auth_context(3), krb5_auth_getcksumtype(3), krb5_auth_getkeytype(3), krb5_auth_getlocalseqnumber(3), krb5_auth_getremoteseqnumber(3), krb5_auth_setcksumtype(3), krb5_auth_setkeytype(3), krb5_auth_setlocalseqnumber(3), krb5_auth_setremoteseqnumber(3), krb5_free_authenticator(3): manage authentication on connection level
krb5kdc(8): Kerberos V5 KDC rst2man-indent-level 0 1 rstReportMargin \$1






ksu(1): Kerberized super-user rst2man-indent-level 0 1 rstReportMargin \$1






kswitch(1): switch primary ticket cache rst2man-indent-level 0 1 rstReportMargin \$1






ktutil(1): Kerberos keytab file maintenance utility rst2man-indent-level 0 1 rstReportMargin \$1






kvno(1): print key version numbers of Kerberos principals rst2man-indent-level 0 1 rstReportMargin \$1






kzonecheck(1): Knot DNS zone check tool rst2man-indent-level 0 1 rstReportMargin \$1






kzonesign(1): DNSSEC signing utility rst2man-indent-level 0 1 rstReportMargin \$1






ldns_pkt2buffer_str(3), ldns_pktheader2buffer_str(3), ldns_rr2buffer_str(3), ldns_rr_list2buffer_str(3), ldns_rdf2buffer_str(3), ldns_key2buffer_str(3), ldns_pkt2buffer_wire(3), ldns_rr2buffer_wire(3), ldns_rdf2buffer_wire(3), ldns_rrsig2buffer_wire(3), ldns_rr_rdata2buffer_wire(3): lower level conversions
ldns_rdf2buffer_str_a(3), ldns_rdf2buffer_str_aaaa(3), ldns_rdf2buffer_str_str(3), ldns_rdf2buffer_str_b64(3), ldns_rdf2buffer_str_hex(3), ldns_rdf2buffer_str_type(3), ldns_rdf2buffer_str_class(3), ldns_rdf2buffer_str_alg(3), ldns_rdf2buffer_str_loc(3), ldns_rdf2buffer_str_unknown(3), ldns_rdf2buffer_str_nsap(3), ldns_rdf2buffer_str_wks(3), ldns_rdf2buffer_str_nsec(3), ldns_rdf2buffer_str_period(3), ldns_rdf2buffer_str_tsigtime(3), ldns_rdf2buffer_str_apl(3), ldns_rdf2buffer_str_int16_data(3), ldns_rdf2buffer_str_int16(3), ldns_rdf2buffer_str_ipseckey(3): lower level to string conversion functions
lev_comp(6): NetHack special levels compiler
level1(3): Level1
level2(3): Level2
level3(3): Level3
libhashkit(3): libhashkit Documentation rst2man-indent-level 0 1 rstReportMargin \$1












libmemcached(3): Introducing the C Client Library for memcached rst2man-indent-level 0 1 rstReportMargin \$1












libmemcached_check_configuration(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












libmemcached_configuration(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












libmemcached_examples(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












libmemcachedutil(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












libnet.h(3): toplevel libnet header file
libnutclient(3): Network UPS Tools high-level client access library
libnutclient_commands(3), nutclient_get_device_commands(3), nutclient_has_device_command(3), nutclient_get_device_command_description(3), nutclient_execute_device_command(3): Instant command related functions in Network UPS Tools high-level client access library
libnutclient_devices(3), nutclient_get_devices(3), nutclient_has_device(3), nutclient_get_device_description(3): Device related functions in Network UPS Tools high-level client access library
libnutclient_general(3), nutclient_destroy(3), strarr_alloc(3), strarr_free(3): General and utility functions in Network UPS Tools high-level client access library
libnutclient_misc(3), nutclient_authenticate(3), nutclient_logout(3), nutclient_device_login(3), nutclient_get_device_num_logins(3), nutclient_device_master(3), nutclient_device_forced_shutdown(3): Miscellaneous functions in Network UPS Tools high-level client access library
libnutclient_tcp(3), nutclient_tcp_create_client(3), nutclient_tcp_is_connected(3), nutclient_tcp_disconnect(3), nutclient_tcp_reconnect(3), nutclient_tcp_set_timeout(3), nutclient_tcp_get_timeout(3): TCP protocol related function for Network UPS Tools high-level client access library
libnutclient_variables(3), nutclient_get_device_variables(3), nutclient_get_device_rw_variables(3), nutclient_has_device_variable(3), nutclient_get_device_variable_description(3), nutclient_get_device_variable_values(3), nutclient_set_device_variable_value(3), nutclient_set_device_variable_values(3): Variable related functions in Network UPS Tools high-level client access library
libowfat_buffer_feed(3), buffer_feed(3): low-level component of buffer_get
libunbound(3), unbound.h(3), ub_ctx(3), ub_result(3), ub_callback_type(3), ub_ctx_create(3), ub_ctx_delete(3), ub_ctx_set_option(3), ub_ctx_get_option(3), ub_ctx_config(3), ub_ctx_set_fwd(3), ub_ctx_set_stub(3), ub_ctx_set_tls(3), ub_ctx_resolvconf(3), ub_ctx_hosts(3), ub_ctx_add_ta(3), ub_ctx_add_ta_autr(3), ub_ctx_add_ta_file(3), ub_ctx_trustedkeys(3), ub_ctx_debugout(3), ub_ctx_debuglevel(3), ub_ctx_async(3), ub_poll(3), ub_wait(3), ub_fd(3), ub_process(3), ub_resolve(3), ub_resolve_async(3), ub_cancel(3), ub_resolve_free(3), ub_strerror(3), ub_ctx_print_local_zones(3), ub_ctx_zone_add(3), ub_ctx_zone_remove(3), ub_ctx_data_add(3), ub_ctx_data_remove(3): Unbound DNS validating resolver 1.15.0 functions
lightning-addgossip(7): Command for injecting a gossip message (low-level)
lightning-createinvoice(7): Low-level invoice creation
lightning-createonion(7): Low-level command to create a custom onion
lightning-decode(7): Command for decoding an invoice string (low-level)
lightning-decodepay(7): Command for decoding a bolt11 string (low-level)
lightning-getroute(7): Command for routing a payment (low-level)
lightning-listsendpays(7): Low-level command for querying sendpay status
lightning-sendcustommsg(7): Low-level interface to send protocol messages to peers
lightning-sendonionmessage(7): low-level command to send an onion message
lightning-sendpay(7): Low-level command for sending a payment via a route
llvmopenmp-devel(1), llvmopenmp(1): LLVM/OpenMP 15.0.0git NOTE: 0.0 3.5 This document is a work in progress and most of the expected content is not yet available. While you can expect changes, we always welcome feedback and additions. Please contact, e.g., through openmp-dev@lists.llvm.org. OpenMP impacts various parts of the LLVM project, from the frontends (%Clang and Flang), through middle-end optimizations, up to the multitude of available OpenMP runtimes. A high-level overview of OpenMP in LLVM can be found here
llvmopenmp12(1), llvmopenmp(1): LLVM/OpenMP NOTE: 0.0 3.5 This document is a work in progress and most of the expected content is not yet available. While you can expect changes, we always welcome feedback and additions. Please contact, e.g., through openmp-dev@lists.llvm.org. OpenMP impacts various parts of the LLVM project, from the frontends (%Clang and Flang), through middle-end optimizations, up to the multitude of available OpenMP runtimes. A high-level overview of OpenMP in LLVM can be found here
llvmopenmp13(1), llvmopenmp(1): LLVM/OpenMP NOTE: 0.0 3.5 This document is a work in progress and most of the expected content is not yet available. While you can expect changes, we always welcome feedback and additions. Please contact, e.g., through openmp-dev@lists.llvm.org. OpenMP impacts various parts of the LLVM project, from the frontends (%Clang and Flang), through middle-end optimizations, up to the multitude of available OpenMP runtimes. A high-level overview of OpenMP in LLVM can be found here
llvmopenmp14(1), llvmopenmp(1): LLVM/OpenMP 14.0.0 NOTE: 0.0 3.5 This document is a work in progress and most of the expected content is not yet available. While you can expect changes, we always welcome feedback and additions. Please contact, e.g., through openmp-dev@lists.llvm.org. OpenMP impacts various parts of the LLVM project, from the frontends (%Clang and Flang), through middle-end optimizations, up to the multitude of available OpenMP runtimes. A high-level overview of OpenMP in LLVM can be found here
lmtptest(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






memaslap(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_add(3): Storing and Replacing Data rst2man-indent-level 0 1 rstReportMargin \$1












memcached_add_by_key(3): Storing and Replacing Data rst2man-indent-level 0 1 rstReportMargin \$1












memcached_analyze(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_append(3): Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_append_by_key(3): Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_behavior_get(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_behavior_set(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_callback_get(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_callback_set(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_cas(3): Working with data on the server in an atomic fashion rst2man-indent-level 0 1 rstReportMargin \$1












memcached_cas_by_key(3): Storing and Replacing Data rst2man-indent-level 0 1 rstReportMargin \$1












memcached_clone(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_create(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_decrement(3): Incrementing and Decrementing Values rst2man-indent-level 0 1 rstReportMargin \$1












memcached_decrement_with_initial(3): Incrementing and Decrementing Values rst2man-indent-level 0 1 rstReportMargin \$1












memcached_delete(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_delete_by_key(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_destroy_sasl_auth_data(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_dump(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_exist(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_exist_by_key(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_fetch(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_fetch_execute(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_fetch_result(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_flush_buffers(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_free(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_generate_hash(3): Generating hash values directly rst2man-indent-level 0 1 rstReportMargin \$1












memcached_generate_hash_value(3): Generating hash values directly rst2man-indent-level 0 1 rstReportMargin \$1












memcached_get(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_get_by_key(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_get_memory_allocators(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_get_sasl_callbacks(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_get_user_data(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_increment(3): Incrementing and Decrementing Values rst2man-indent-level 0 1 rstReportMargin \$1












memcached_increment_with_initial(3): Incrementing and Decrementing Values rst2man-indent-level 0 1 rstReportMargin \$1












memcached_last_error_message(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_lib_version(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_mget(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_mget_by_key(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_mget_execute(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_mget_execute_by_key(3): Retrieving data from the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_behavior_get(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_behavior_set(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_create(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_destroy(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_fetch(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_pop(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_push(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_release(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_pool_st(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_prepend(3): Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_prepend_by_key(3): Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1












memcached_quit(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_replace(3): Storing and Replacing Data rst2man-indent-level 0 1 rstReportMargin \$1












memcached_replace_by_key(3): Storing and Replacing Data rst2man-indent-level 0 1 rstReportMargin \$1












memcached_sasl_set_auth_data(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_add(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_count(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_cursor(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_list(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_list_append(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_list_count(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_list_free(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_server_push(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_servers_parse(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_set(3): Storing and Replacing Data rst2man-indent-level 0 1 rstReportMargin \$1












memcached_set_by_key(3): Storing and Replacing Data rst2man-indent-level 0 1 rstReportMargin \$1












memcached_set_memory_allocators(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_set_sasl_callbacks(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_set_user_data(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_stat(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_stat_execute(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_stat_get_keys(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_stat_get_value(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_stat_servername(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_strerror(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_touch(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_touch_by_key(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_verbosity(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcached_version(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcapable(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcat(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memcp(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memerror(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memexist(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memflush(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memparse(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memping(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memrm(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memslap(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memstat(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












memtouch(1): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1












metalink_t(3): Metalink top level structure
mformat(1): add an MSDOS filesystem to a low-level formatted floppy disk '" t TQ \$1 . (is' (if` (pd"
modulefile(5): files containing Tcl code for the Modules package rst2man-indent-level 0 1 rstReportMargin \$1






mupdatetest(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






ne_request_create(3), ne_request_dispatch(3), ne_request_destroy(3): low-level HTTP request handling
nghttp(1): HTTP/2 client rst2man-indent-level 0 1 rstReportMargin \$1






nghttpd(1): HTTP/2 server rst2man-indent-level 0 1 rstReportMargin \$1






nghttpx(1): HTTP/2 proxy rst2man-indent-level 0 1 rstReportMargin \$1






nntptest(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






normalize(1): adjusts volume levels of audio files
normalize-mp3(1): adjust levels of mp3 or ogg files by running normalize(1), then re-encoding
notcurses_multiselector(3): high level widget for selecting from a set
notcurses_plot(3): high level widget for plotting
notcurses_progbar(3): high level widget for progress bars
notcurses_reader(3): high level widget for collecting input
notcurses_reel(3): high-level widget for hierarchical data
notcurses_selector(3): high level widget for selecting from a set
notcurses_tree(3): high-level hierarchical line-based data
ocaml(1): The OCaml interactive toplevel
ocamldebug(1): the OCaml source-level replay debugger
ocamlmktop(1): Building custom toplevel systems
octave(1): A high-level interactive language for numerical computations
octave-cli(1): A high-level interactive language for numerical computations
openvpn-examples(5), openvpn examples(5): Secure IP tunnel daemon rst2man-indent-level 0 1 rstReportMargin \$1






operon(1): command line music tagger rst2man-indent-level 0 1 rstReportMargin \$1






ovs-vswitchd.conf.db(5), ovs-vswitchd[char46]conf[char46]db(5): Open_vSwitch database schema A database with this schema holds the configuration for one Open vSwitch daemon[char46] The top-level configuration for the daemon is the Open_vSwitch table, which must have exactly one record[char46] Records in other tables are significant only when they can be reached directly or indirectly from the Open_vSwitch table[char46] Records that are not reachable from the Open_vSwitch table are automatically deleted from the database, except for records in a few distinguished ``root set(cq(cq tables[char46]
pacman(6): simulates a game of Pac-Man on a randomly-created level
pamlevels(1): effect a 'levels' transformation synopsis
pbm(5): Netpbm bi-level image format description
perfdhcp(8): DHCP benchmarking tool rst2man-indent-level 0 1 rstReportMargin \$1






peval(1): Low level evaluation tool for writing router config generators
pgmmake(1): create a PGM image of a specified gray level and dimensions synopsis
pkg_create(3), pkg_create_i(3), pkg_create_new(3), pkg_create_free(3), pkg_create_set_format(3), pkg_create_set_overwrite(3), pkg_create_set_compression_level(3), pkg_set_rootdir(3), pkg_set_output_dir(3), pkg_create_set_timestamp(3): create packages
please(1): execute a command as root rst2man-indent-level 0 1 rstReportMargin \$1






pmemobj_memcpy_persist(3), pmemobj_persist()(3), pmemobj_xpersist()(3), pmemobj_flush()(3), pmemobj_xflush()(3), pmemobj_drain()(3), pmemobj_memcpy()(3), pmemobj_memmove()(3), pmemobj_memset()(3), pmemobj_memcpy_persist()(3), pmemobj_memset_persist()(3): low-level memory manipulation functions
pop3test(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






pqshell(1): A shell-like to interact with a Postfix mails queue rst2man-indent-level 0 1 rstReportMargin \$1






ps2pdfwr(1): Convert PostScript to PDF without specifying CompatibilityLevel, using ghostscript
pycallgraph(1): Python Call Graph rst2man-indent-level 0 1 rstReportMargin \$1












quodlibet(1): audio library manager and player rst2man-indent-level 0 1 rstReportMargin \$1






rwbagtool(1): Perform high-level operations on binary Bag files
salt(1): salt rst2man-indent-level 0 1 rstReportMargin \$1






salt(7): Salt Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-api(1): salt-api Command rst2man-indent-level 0 1 rstReportMargin \$1






salt-call(1): salt-call Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-cloud(1): Salt Cloud Command rst2man-indent-level 0 1 rstReportMargin \$1






salt-cp(1): salt-cp Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-key(1): salt-key Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-master(1): salt-master Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-minion(1): salt-minion Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-proxy(1): salt-proxy Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-run(1): salt-run Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-ssh(1): salt-ssh Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-syndic(1): salt-syndic Documentation rst2man-indent-level 0 1 rstReportMargin \$1






salt-unity(1): salt-unity Command rst2man-indent-level 0 1 rstReportMargin \$1






samba-nsupdate(1): dynamic DNS update utility rst2man-indent-level 0 1 rstReportMargin \$1






sasl(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_authorize_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_auxprop(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_auxprop_getctx(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_auxprop_request(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_callbacks(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_canon_user_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_chalprompt_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_checkapop(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_checkpass(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_client_init(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_client_new(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_client_start(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_client_step(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_decode(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_dispose(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_done(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_encode(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_encodev(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_errdetail(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_errors(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_errstring(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_getconfpath_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_getopt_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_getpath_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_getprop(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_getrealm_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_getsecret_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_getsimple_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_global_listmech(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_idle(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_listmech(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_log_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_server_init(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_server_new(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_server_start(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_server_step(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_server_userdb_checkpass_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_server_userdb_setpass_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_setpass(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_setprop(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_user_exists(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sasl_verifyfile_t(3): Cyrus SASL documentation rst2man-indent-level 0 1 rstReportMargin \$1






sc_R12IntEval(3), sc::R12IntEval(3): R12IntEval is the top-level class which computes intermediates occuring in linear R12 theories
sclient(1): sample Kerberos version 5 client rst2man-indent-level 0 1 rstReportMargin \$1






show_os_cursor(3): Low level function to display the operating system cursor. Allegro game programming library
sieveshell(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






silk(7), SiLK(7): the System for Internet-Level Knowledge
single_blas_level1(3): real
single_blas_level2(3): real
single_blas_level3(3): real
sivtest(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






smi_config(3), smiInit(3), smiExit(3), smiSetErrorLevel(3), smiGetFlags(3), smiSetFlags(3), smiLoadModule(3), smiGetPath(3), smiSetPath(3), smiReadConfig(3): SMI library configuration routines
smtptest(1): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






solve-field(1): Main high-level command-line user interface
sserver(8): sample Kerberos version 5 server rst2man-indent-level 0 1 rstReportMargin \$1






sshguard(8): block brute-force attacks by aggregating system logs rst2man-indent-level 0 1 rstReportMargin \$1






sshguard-setup(7): setting up SSHGuard on your system rst2man-indent-level 0 1 rstReportMargin \$1






sss_debuglevel(8): [DEPRECATED] change debug level while SSSD is running
stdlog(3), liblogging-stdlog(3): standard logging library rst2man-indent-level 0 1 rstReportMargin \$1






stdlogctl(1): utility for the standard logging library rst2man-indent-level 0 1 rstReportMargin \$1






suricata(1): Suricata rst2man-indent-level 0 1 rstReportMargin \$1






suricatactl(1): Suricata Control rst2man-indent-level 0 1 rstReportMargin \$1






suricatactl-filestore(1): Perform actions on filestore rst2man-indent-level 0 1 rstReportMargin \$1






suricatasc(1): Tool to interact via unix socket rst2man-indent-level 0 1 rstReportMargin \$1






svgalib(7): a low level graphics library for linux
sysctlmibinfo(3), SYSCTLMIF_VERSION(3), SYSCTLMIF_MAXIDLEVEL(3), sysctlmif_nametoid(3), sysctlmif_name(3), SYSCTLMIF_NAMELEN(3), sysctlmif_desc(3), SYSCTLMIF_DESCLEN(3), sysctlmif_label(3), SYSCTLMIF_LABELLEN(3), sysctlmif_info(3), SYSCTLMIF_INFOKIND(3), SYSCTLMIF_INFOTYPE(3), SYSCTLMIF_INFOFLAGS(3), SYSCTLMIF_INFOFMT(3), sysctlmif_nextnode(3), sysctlmif_nextleaf(3), sysctlmif_object(3), sysctlmif_freeobject(3), sysctlmif_filterlist(3), SYSCTLMIF_LIST(3), SYSCTLMIF_MAXDEPTH(3), sysctlmif_grouplist(3), sysctlmif_freelist(3), sysctlmif_tree(3), sysctlmif_freetree(3), sysctlmif_mib(3), sysctlmif_freemib(3): sysctl MIB-Tree API
tar_extract_all(3), tar_extract_glob(3), tar_append_tree(3): high-level tar archive manipulation functions
tiffdither(1): convert a greyscale image to bilevel using dithering
toplevel.tk85(n), toplevel(n): Create and manipulate toplevel widgets
toplevel.tk86(n), toplevel(n): Create and manipulate 'toplevel' main and popup window widgets
transform(n): Tcl level transformations
tsv(n): Part of the Tcl threading extension allowing script level manipulation of data shared between threads
uconvert(3): High level string encoding conversion wrapper. Allegro game programming library
ucwidth(3): Low level helper function for testing Unicode text data. Allegro game programming library
ugetc(3): Low level helper function for reading Unicode text data. Allegro game programming library
ugetx(3), ugetxc(3): Low level helper function for reading Unicode text data. Allegro game programming library
uisok(3): Low level helper function for testing Unicode text data. Allegro game programming library
unicode::bidi(3), unicode::bidi_calc(3), unicode::bidi_calc_types(3), unicode::bidi_reorder(3), unicode::bidi_cleanup(3), unicode::bidi_logical_order(3), unicode::bidi_combinings(3), unicode::bidi_needs_embed(3), unicode::bidi_embed(3), unicode::bidi_embed_paragraph_level(3), unicode::bidi_get_direction(3), unicode::bidi_override(3): unicode bi-directional algorithm
unicode_bidi(3), unicode_bidi_calc_levels(3), unicode_bidi_calc_types(3), unicode_bidi_calc(3), unicode_bidi_reorder(3), unicode_bidi_cleanup(3), unicode_bidi_cleaned_size(3), unicode_bidi_logical_order(3), unicode_bidi_combinings(3), unicode_bidi_needs_embed(3), unicode_bidi_embed(3), unicode_bidi_embed_paragraph_level(3), unicode_bidi_direction(3), unicode_bidi_type(3), unicode_bidi_setbnl(3), unicode_bidi_mirror(3), unicode_bidi_bracket_type(3): unicode bi-directional algorithm
update_dialog(3): Low level function to update a dialog player. Allegro game programming library
update_menu(3): Low level function to update a menu player. Allegro game programming library
uplevel.tcl85(n), uplevel(n): Execute a script in a different stack frame
uplevel.tcl86(n), uplevel(n): Execute a script in a different stack frame
uplevel.tcl87(n), uplevel(n): Execute a script in a different stack frame
usetc(3): Low level helper function for writing Unicode text data. Allegro game programming library
uwidth(3): Low level helper function for testing Unicode text data. Allegro game programming library
vgagl(7): a fast framebuffer-level graphics library based on svgalib
volpack-OctreeMask(3), vpOctreeMask(3): compute a mask representing one level of a min-max octree
webpinfo(1): print out the chunk level structure of WebP files along with basic integrity checks
xadump(1): low level access to a Recoll Xapian index
xforward(1): provide user-level X forwarding service
xmindpath(1): MindPath PocketPoint user-level driver for X11
yadex(6): a Doom/Heretic/Strife level editor
zsock(3): Class for high-level socket API that hides libzmq contexts and sockets
zsys(3): Class for system-level methods
Acme::HTTP(3): High-level access to Net::HTTP::NB and Net::HTTPS::NB
Amazon::SimpleDB(3): a low-level perlish interface for working with Amazon's SimpleDB service
AnyEvent::IRC::Client(3): A highlevel IRC connection
AnyEvent::XMPP::SimpleConnection(3): Low level TCP/TLS connection
App::Cache(3): Easy application-level caching
Bio::GFF3::LowLevel(3): fast, low-level functions for parsing and formatting GFF3
Bio::GFF3::LowLevel::Parser(3): a fast, low-level gff3 parser
Bio::GFF3::LowLevel::Parser::1_0_backcompat(3): compatibility layer to support Bio::GFF3::LowLevel::Parser 1.0 API
Bio::Phylo::Manual(3): High-level user guide
Bio::Phylo::Util::Logger(3): Logger of internal messages of several severity levels
Bio::Variation::DNAMutation(3): DNA level mutation class
Bio::Variation::RNAChange(3): Sequence change class for RNA level
Business::EDI(3): Top level class for generating U.N. EDI interchange objects and subobjects
CDDB(3), CDDB.pm(3): a high-level interface to cddb protocol servers (freedb and CDDB)
CHI::Driver::File(3): File-based cache using one file per entry in a multi-level directory structure
Class::AlzaboWrapper(3): Higher level wrapper around Alzabo Row and Table objects
Class::AlzaboWrapper::Cursor(3): Higher level wrapper around Alzabo cursor objects
Class::Fields::Fuxor(3), Class::Fields::Fuxor(3): Low level manipuation of object data members
Compress::Raw::Bzip2(3): Low-Level Interface to bzip2 compression library
Compress::Raw::Lzma(3): Low-Level Interface to lzma compression library
Compress::Raw::Zlib(3): Low-Level Interface to zlib compression library
Coro::MakeMaker(3): MakeMaker glue for the XS-level Coro API
DBIx::SQLEngine(3): Extends DBI with High-Level Operations
DBM::Deep(3): A pure perl multi-level hash/array DBM that supports transactions
DBM::Deep::Storage::File(3): mediate low-level interaction with storage mechanism
DR::Tarantool::LLClient(3): a low level async client for Tarantool <http://tarantool.org>
Data::Localize::MultiLevel(3): Fetch Data From Multi-Level Data Structures
Data::Peek(3): A collection of low-level debug facilities
Date::Simple::Fmt(3): Sub class of Date::Simple with per object level formatting for overloaded stringification
Devel::Declare::Parser(3): Higher level interface to Devel-Declare
EV::MakeMaker(3): MakeMaker glue for the C-level EV API
Event::ExecFlow(3): High level API for event-based execution flow control
Event::MakeMaker(3): MakeMaker glue for the C-level Event API
Furl::HTTP(3): Low level interface to Furl
Gungho::Manual::FAQ(3): Gungho FAQ n .SH "Q. ""Why Did You Call It Gungho""?" .SH "Q. ``Why Did You Call It Gungho''?" Header "Q. Why Did You Call It Gungho?" It rhymes with Xango, which is its predecessor. n .SH "Q. ""I don't understand the notation of the config""" .SH "Q. ``I don't understand the notation of the config''" Header "Q. I don't understand the notation of the config" To make the notation concise, we use a notation like engine.module = POE. Each level is a key in the hash, so the previous example translates to a config like my $config = { engine => { module => "POE" } } Or, in YAML: engine: module: POE n .SH "Q. ""My requests are being served slow. What can I do?""" .SH "Q. ``My requests are being served slow. What can I do?''" Header "Q. My requests are being served slow. What can I do?" There are actually a number of things that may affect fetch speed
HTTP::MHTTP(3): this library provides reasonably low level access to the HTTP protocol, for perl. This does not replace LWP (what possibly could :-) but is a cut for speed. It also supports all of HTTP 1.0, so you have GET, POST, PUT, HEAD, and DELETE. Some support of HTTP 1.1 is available - sepcifically Transfer-Encoding = chunked and the Keep-Alive extensions. Additionally - rudimentary SSL support can be compiled in. This effectively enables negotiation of TLS, but does not validate the certificates
HTTP::Tiny::UA(3): Higher-level UA features for HTTP::Tiny
Hijk(3): Fast & minimal low-level HTTP client
IO::Tty(3): Low-level allocate a pseudo-Tty, import constants
Imager::Font::FreeType2(3), Imager::Font::FreeType2(3): low-level functions for FreeType2 text output
Imager::Font::T1(3), Imager::Font::Type1(3): low-level functions for Type1 fonts
Imager::Font::Truetype(3), Imager::Font::Truetype(3): low-level functions for Truetype fonts
Imager::Font::Type1(3), Imager::Font::Type1(3): low-level functions for T1Lib text output
Imager::interface(3), Imager::interface.pod(3): describes the C level virtual image interface
Iodef::Pb::Simple(3): Perl extension providing high level API access to Iodef::Pb. It takes simple key-pair hashes and maps them to the appropriate IODEF classes using a Module::Pluggable framework of plugins
Log::Agent::Priorities(3): conversion between syslog priorities and levels
Log::Handler::Levels(3): All levels for Log::Handler
Log::Log4perl::Appender::ScreenColoredLevels(3): Colorize messages according to level
Log::Log4perl::Filter::LevelMatch(3): Filter to match the log level exactly
Log::Log4perl::Filter::LevelRange(3): Filter for a range of log levels
Log::Log4perl::Level(3): Predefined log levels
Log::ger::Format::MultilevelLog(3): Create a log($LEVEL, ...) subroutine/method
Log::ger::Plugin::MultilevelLog(3): (DEPRECATED) Old name for Log::ger::Format::MultilevelLog
MLDBM(3): store multi-level Perl hash structure in single level tied hash
MPI_Get_count(3), MPI_Get_count (3): Gets the number of top-level elements received
MPI_Query_thread(3): Returns the current level of thread support
Mac::PropertyList(3): work with Mac plists at a low level
Marpa::HTML(3): High-level HTML Parser
Mojo::Reactor(3): Low-level event reactor base class
Mojo::Reactor::EV(3): Low-level event reactor with libev support
Mojo::Reactor::Poll(3): Low-level event reactor with poll support
MooseX::Storage::Basic(3): The simplest level of serialization
NSNMP(3): fast, flexible, low-level, pure-Perl SNMP library
Net::AMQP::Frame(3): AMQP wire-level Frame object
Net::AMQP::Frame::Body(3): AMQP wire-level body Frame object
Net::AMQP::Frame::Header(3): AMQP wire-level header Frame object
Net::AMQP::Frame::Heartbeat(3): AMQP wire-level heartbeat Frame object
Net::AMQP::Frame::Method(3): AMQP wire-level method Frame object
Net::AMQP::Frame::OOBBody(3): AMQP wire-level out-of-band body Frame object
Net::AMQP::Frame::OOBHeader(3): AMQP wire-level out-of-band header Frame object
Net::AMQP::Frame::OOBMethod(3): AMQP wire-level out-of-band method Frame object
Net::AMQP::Frame::Trace(3): AMQP wire-level trace Frame object
Net::DRI::Protocol::EPP::Extensions::NeuLevel::IDNLanguage(3): NeuLevel EPP IDN Language Commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NeuLevel::UIN(3): EPP Extension for .TRAVEL UIN for Net::DRI
Net::EPP::Protocol(3): Low-level functions useful for both EPP clients and servers
Net::HTTP(3): Low-level HTTP connection (client)
Net::HTTPS(3): Low-level HTTP over SSL/TLS connection (client)
Net::Libdnet::Arp(3): high level API to access libdnet arp_* functions
Net::Libdnet::Eth(3): high level API to access libdnet eth_* functions
Net::Libdnet::Fw(3): high level API to access libdnet fw_* functions
Net::Libdnet::Intf(3): high level API to access libdnet intf_* functions
Net::Libdnet::Ip(3): high level API to access libdnet ip_* functions
Net::Libdnet::Route(3): high level API to access libdnet route_* functions
Net::Libdnet::Tun(3): high level API to access libdnet tun_* functions
Net::OpenSSH::OSTracer(3): trace ssh master process at the OS level
Net::SSH::Perl::Buffer(3): Low-level read/write buffer class
Net::XMPP2::SimpleConnection(3): Low level TCP/TLS connection
NetPacket(3): assemble/disassemble network packets at the protocol level
ODF::lpOD::StructuredContainer(3): High-level structures other than tables
Ocsinventory::Agent::Common(3): give common methods to other modules "addController()" 4 Item "addController()" Add a controller in the inventory. "addUsb()" 4 Item "addUsb()" Add external usb devices in the inventory. "addInput()" 4 Item "addInput()" Add internal inputs as keyboard, mouse in the inventory. "addModem()" 4 Item "addModem()" Add a modem in the inventory. "addDrive()" 4 Item "addDrive()" Add a partition in the inventory. "addStorages()" 4 Item "addStorages()" Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory. "addMemory()" 4 Item "addMemory()" Add a memory module in the inventory. "addPort()" 4 Item "addPort()" Add a port module in the inventory. "addSlot()" 4 Item "addSlot()" Add a slot in the inventory. "addSoftware()" 4 Item "addSoftware()" Register a software in the inventory. "addMonitor()" 4 Item "addMonitor()" Add a monitor (screen) in the inventory. "addVideo()" 4 Item "addVideo()" Add a video card in the inventory. "addSound()" 4 Item "addSound()" Add a sound card in the inventory. "addNetwork()" 4 Item "addNetwork()" Register a network in the inventory. "addRepo()" 4 Item "addRepo()" Register a repository in the inventory. "setHardware()" 4 Item "setHardware()" Save global information regarding the machine. The use of setHardware() to update USERID and PROCESSOR* information is deprecated, please, use addUser() and addCPU() instead. "setBios()" 4 Item "setBios()" Set BIOS information. "addCPU()" 4 Item "addCPU()" Add a CPU in the inventory. "addUser()" 4 Item "addUser()" Add an user in the list of logged user. "addLocalUser()" 4 Item "addLocalUser()" Add local users in the inventory. "addLocalGroup()" 4 Item "addLocalGroup()" Add local groups in the inventory. "addPrinter()" 4 Item "addPrinter()" Add a printer in the inventory. "addVirtualMachine()" 4 Item "addVirtualMachine()" Add a Virtual Machine in the inventory. "addProcess()" 4 Item "addProcess()" Record a running process in the inventory. "addCamera()" 4 Item "addCamera()" Add a camera device in the inventory. Only avalaible for MacOSX "addIpDiscoverEntry()" 4 Item "addIpDiscoverEntry()" IpDiscover is used to identify network interface on the local network. This is done on the ARP level. This function adds a network interface in the inventory. "setAccessLog()" 4 Item "setAccessLog()" What is that for? :) "flushXMLTags()" 4 Item "flushXMLTags()" Clear the content of $common->{xmltags} (to use after adding it in XML) "addBatteries()" 4 Item "addBatteries()" Add a memory module in the inventory
OpenOffice::OODoc::Document(3): Top level component for content and layout processing
OpenOffice::OODoc::XPath(3): Low-level navigation in the documents
PDF::API2::Basic::PDF::Array(3): Low-level PDF array object
PDF::API2::Basic::PDF::Bool(3): Low-level PDF boolean object true or false
PDF::API2::Basic::PDF::Dict(3): Low-level dictionary and stream objects
PDF::API2::Basic::PDF::File(3): Low-level PDF file access
PDF::API2::Basic::PDF::Name(3): Low-level PDF name object
PDF::API2::Basic::PDF::Null(3): Low-level PDF null object
PDF::API2::Basic::PDF::Number(3): Low-level PDF numeric object
PDF::API2::Basic::PDF::Objind(3): Low-level PDF indirect object
PDF::API2::Basic::PDF::Page(3): Low-level PDF page object
PDF::API2::Basic::PDF::Pages(3): Low-level page tree object
PDF::API2::Basic::PDF::String(3): Low-level PDF string object
PDF::API2::Basic::PDF::Utils(3): Convenience functions for creating low-level PDF objects
POE::Component::Client::Whois::TLDList(3): Determine the applicable Whois server for a given Top-level domain (TLD)
POSIX::Socket(3): Low-level perl interface to POSIX sockets
PPIx::Regexp::Structure::Regexp(3): Represent the top-level regular expression
Paws::Support::DescribeSeverityLevels(3): Arguments for method DescribeSeverityLevels on Paws::Support
Pod::Abstract::Tree(3): Manage a level of Pod document tree Nodes
Pod::Tree::PerlTop(3): generate a top-level index for Perl PODs
Prima::MDI(3): top-level windows emulation classes
Protocol::XMPP(3): Protocol-level support for XMPP interaction
Return::MultiLevel(3): return across multiple call levels
Search::Elasticsearch::Client::0_90::Direct::Cluster(3): A client for running cluster-level requests
Search::Elasticsearch::Client::0_90::Direct::Indices(3): A client for running index-level requests
Search::Elasticsearch::Client::1_0::Direct::Cluster(3): A client for running cluster-level requests
Search::Elasticsearch::Client::1_0::Direct::Indices(3): A client for running index-level requests
Search::Elasticsearch::Client::1_0::Direct::Nodes(3): A client for running node-level requests
Search::Elasticsearch::Client::2_0::Direct::Cluster(3): A client for running cluster-level requests
Search::Elasticsearch::Client::2_0::Direct::Indices(3): A client for running index-level requests
Search::Elasticsearch::Client::2_0::Direct::Nodes(3): A client for running node-level requests
Search::Elasticsearch::Client::5_0::Direct::Cluster(3): A client for running cluster-level requests
Search::Elasticsearch::Client::5_0::Direct::Indices(3): A client for running index-level requests
Search::Elasticsearch::Client::5_0::Direct::Nodes(3): A client for running node-level requests
Search::Elasticsearch::Client::6_0::Direct::Cluster(3): A client for running cluster-level requests
Search::Elasticsearch::Client::6_0::Direct::Indices(3): A client for running index-level requests
Search::Elasticsearch::Client::6_0::Direct::Nodes(3): A client for running node-level requests
Sub::Uplevel(3): apparently run a function in a higher stack frame
Test2::Tools::Grab(3): Temporarily intercept all events without adding a scope level
Text::UnicodeBox::Table(3): High level interface providing easy table drawing
Tie::LevelDB(3): A Perl Interface to the Google LevelDB NoSQL database
Tk::IO(3): high level interface to Tk's 'fileevent' mechanism
Tk::OlWm(3): Interface to OpenLook properties of toplevel windows
Tk::Pod(3): Pod browser toplevel widget
Tk::Toplevel(3): Create and manipulate Toplevel widgets
VM::EC2::Staging::Server(3): High level interface to EC2-based servers
VM::EC2::Staging::Volume(3): High level functions for provisioning and populating EC2 volumes
Video::DVDRip(3): GUI for copying DVDs, based on an open Low Level API
X11::Xlib(3): Low-level access to the X11 library
XML::DOM(3): A perl module for building DOM Level 1 compliant document structures
XML::DOM2::Element(3), XML::DOM2::Element(3): XML Element level control
XML::GDOME(3), XML::GDOME(3): Interface to Level 2 DOM gdome2 library
XML::Parser::Expat(3): Lowlevel access to James Clark's expat XML parser
alias(1): define or display aliases rst2man-indent-level 0 1 rstReportMargin \$1






ansible(1): Define and run a single task 'playbook' against a set of hosts rst2man-indent-level 0 1 rstReportMargin \$1






ansible-config(1): View ansible configuration. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-console(1): REPL console for executing Ansible tasks. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-doc(1): plugin documentation tool rst2man-indent-level 0 1 rstReportMargin \$1






ansible-galaxy(1): Perform various Role and Collection related operations. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-inventory(1): None rst2man-indent-level 0 1 rstReportMargin \$1






ansible-playbook(1): Runs Ansible playbooks, executing the defined tasks on the targeted hosts. rst2man-indent-level 0 1 rstReportMargin \$1






ansible-pull(1): pulls playbooks from a VCS repo and executes them for the local host rst2man-indent-level 0 1 rstReportMargin \$1






ansible-vault(1): encryption/decryption utility for Ansible data files rst2man-indent-level 0 1 rstReportMargin \$1






arbitron(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






backupd(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






bg(1): resume jobs in the background rst2man-indent-level 0 1 rstReportMargin \$1






bk-level(1), bk level(1): set or show the level of the repository
break(1): break out of loop rst2man-indent-level 0 1 rstReportMargin \$1






bugzilla(1): command line tool for interacting with Bugzilla rst2man-indent-level 0 1 rstReportMargin \$1






builtin(1): add, delete, or display shell built-ins rst2man-indent-level 0 1 rstReportMargin \$1






bup-cat-file(1): extract archive content (low-level)
cd(1): change working directory rst2man-indent-level 0 1 rstReportMargin \$1






certbot(1): certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.21.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
chk_cyrus(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






chmod(1): change the access permissions of files rst2man-indent-level 0 1 rstReportMargin \$1






command(1): execute a simple command rst2man-indent-level 0 1 rstReportMargin \$1






compgen(1): command completion rst2man-indent-level 0 1 rstReportMargin \$1






complete(1): command completion rst2man-indent-level 0 1 rstReportMargin \$1






continue(1): continue execution at top of the loop rst2man-indent-level 0 1 rstReportMargin \$1






ctl_backups(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






ctl_conversationsdb(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






ctl_cyrusdb(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






ctl_deliver(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






ctl_mboxlist(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






ctl_zoneinfo(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cut(1): cut out selected columns or fields of each line of a file rst2man-indent-level 0 1 rstReportMargin \$1






cvt_cyrusdb(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_backup(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_buildinfo(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_dbtool(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_deny(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_df(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_expire(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_info(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_synclog(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






cyr_virusscan(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






deliver(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






dirname(1): return directory portion of file name rst2man-indent-level 0 1 rstReportMargin \$1






disown(1): disassociate a job from the current shell rst2man-indent-level 0 1 rstReportMargin \$1






dm(nged): Provides a means to interact with the display manager at a lower level
dthelpgen(1): generates a top-level help browser volume
enum(1): create an enumeration type rst2man-indent-level 0 1 rstReportMargin \$1






erl_prim_loader(3): Low Level Erlang Loader
erl_prim_loader(3): Low-level Erlang loader
eval(1): create a shell command and process it rst2man-indent-level 0 1 rstReportMargin \$1






exec(1): execute command, open/close/duplicate file descriptors rst2man-indent-level 0 1 rstReportMargin \$1






exit(1): exit the current shell rst2man-indent-level 0 1 rstReportMargin \$1






export(1): set export attribute on variables rst2man-indent-level 0 1 rstReportMargin \$1






fg(1): move jobs to the foreground rst2man-indent-level 0 1 rstReportMargin \$1






frozen-bubble-editor(1): a level editor for Frozen Bubble
fud(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






gramps(1), English(1): rst2man-indent-level 0 1 rstReportMargin \$1






head(1): output beginning portion of one or more files rst2man-indent-level 0 1 rstReportMargin \$1






httpd(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






idled(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






imapd(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






ipurge(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






jobs(1): display status of jobs rst2man-indent-level 0 1 rstReportMargin \$1






julia(1): high-level, high-performance dynamic programming language for technical computing
kitty(1): kitty Documentation rst2man-indent-level 0 1 rstReportMargin \$1






kitty.conf(5): kitty.conf Documentation rst2man-indent-level 0 1 rstReportMargin \$1






let(1): evaluate arithmetic expressions rst2man-indent-level 0 1 rstReportMargin \$1






lmtpd(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






logname(1): return the user's login name rst2man-indent-level 0 1 rstReportMargin \$1






master(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






mbexamine(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






mbpath(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






mbtool(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






mid3cp(1): copy ID3 tags rst2man-indent-level 0 1 rstReportMargin \$1






mid3iconv(1): convert ID3 tag encodings rst2man-indent-level 0 1 rstReportMargin \$1






mid3v2(1): audio tag editor similar to 'id3v2' rst2man-indent-level 0 1 rstReportMargin \$1






moggsplit(1): split Ogg logical streams rst2man-indent-level 0 1 rstReportMargin \$1






mutagen-inspect(1): view Mutagen-supported audio tags rst2man-indent-level 0 1 rstReportMargin \$1






mutagen-pony(1): scan a collection of MP3 files rst2man-indent-level 0 1 rstReportMargin \$1






nagstamon(1), Nagstamon(1): Nagios status monitor which takes place in systray or on desktop rst2man-indent-level 0 1 rstReportMargin \$1






notifyd(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






npm-access(1): Set access level on published packages
orted(1): Start an Open RTE User-Level Daemon
persepolis(1): Persepolis Download Manager rst2man-indent-level 0 1 rstReportMargin \$1






pod::Prima::Window(3), Prima::Window(3): top-level window management
pop3d(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






print(1): write arguments to standard output rst2man-indent-level 0 1 rstReportMargin \$1






printf(1): write formatted output rst2man-indent-level 0 1 rstReportMargin \$1






quota(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






r.lake(1), r.lake (1): Fills lake at given point to given level
r3.mkdspf(1), r3.mkdspf (1): Creates a display file from an existing 3D raster map according to specified threshold levels
read(1): read a line from standard input rst2man-indent-level 0 1 rstReportMargin \$1






readonly(1): set readonly attribute on variables rst2man-indent-level 0 1 rstReportMargin \$1






reconstruct(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






restore(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






return(1): return from a function or dot script rst2man-indent-level 0 1 rstReportMargin \$1






shcomp(1): compile a shell script rst2man-indent-level 0 1 rstReportMargin \$1






shift(1): shift positional parameters rst2man-indent-level 0 1 rstReportMargin \$1






siglevdetcal(1): The SvxLink signal level detector calibration utility
smmapd(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






source(1): execute commands in the current environment rst2man-indent-level 0 1 rstReportMargin \$1






squatter(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






streamlink(1): extracts streams from various services and pipes them into a video player of choice rst2man-indent-level 0 1 rstReportMargin \$1






sync(1): schedule file/file system updates rst2man-indent-level 0 1 rstReportMargin \$1






tickit_build(3): create a new toplevel Tickit instance with arguments
tickit_ctlname(3): return the name of a toplevel instance control
tickit_get_rootwin(3): obtain the root window from the toplevel instance
tickit_get_term(3): obtain the terminal from the toplevel instance
tickit_getctl_int(3), tickit_setctl_int-(3): set an integer toplevel instance control
tickit_new_stdio(3): create a new toplevel Tickit instance
tickit_ref(3), tickit_unref(3): adjust the refcount of the toplevel instance
tickit_run(3), tickit_stop(3), tickit_tick(3): control the event loop of the toplevel instance
tickit_window_new_root(3): create a new toplevel root window
times(1): display CPU usage by the shell and child processes rst2man-indent-level 0 1 rstReportMargin \$1






timsieved(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






tls_prune(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






tops(nged): Displays a list of all the top-level objects in the current database
trap(1): trap signals and conditions rst2man-indent-level 0 1 rstReportMargin \$1






tree(nged): Lists the contents of the specified objects in a tree-like format that displays the hierarchical structure of the objects, and all objects referenced by them, down to the primitive shape level
tstatd(1): Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
ulimit(1): set or display resource limits rst2man-indent-level 0 1 rstReportMargin \$1






umask(1): get or set the file creation mask rst2man-indent-level 0 1 rstReportMargin \$1






unalias(1): remove alias definitions rst2man-indent-level 0 1 rstReportMargin \$1






uname(1): identify the current system rst2man-indent-level 0 1 rstReportMargin \$1






unexpunge(8): Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1






unset(1): unset values and attributes of variables and functions rst2man-indent-level 0 1 rstReportMargin \$1






wait(1): wait for process or job completion rst2man-indent-level 0 1 rstReportMargin \$1






whence(1): locate a command and describe its type rst2man-indent-level 0 1 rstReportMargin \$1






who(nged): Lists the top-level objects that are currently displayed
wxTopLevelWindow(3): Functions for wxTopLevelWindow class

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages