Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
gvinum(8)
Logical Volume Manager control program
gvirstor(8)
control utility for virtual data storage devices
kvm_getprocs(3), kvm_getargv(3), kvm_getenvv(3)
access user process state
procstat_close(3), procstat_freeargv(3), procstat_freeauxv(3), procstat_freeenvv(3), procstat_freefiles(3), procstat_freegroups(3), procstat_freekstack(3), procstat_freeprocs(3), procstat_freeptlwpinfo(3), procstat_freevmmap(3), procstat_get_pipe_info(3), procstat_get_pts_info(3), procstat_get_sem_info(3), procstat_get_shm_info(3), procstat_get_socket_info(3), procstat_get_vnode_info(3), procstat_getargv(3), procstat_getauxv(3), procstat_getenvv(3), procstat_getfiles(3), procstat_getgroups(3), procstat_getkstack(3), procstat_getosrel(3), procstat_getpathname(3), procstat_getprocs(3), procstat_getptlwpinfo(3), procstat_getrlimit(3), procstat_getumask(3), procstat_getvmmap(3), procstat_open_core(3), procstat_open_kvm(3), procstat_open_sysctl(3)
library interface for file and process information retrieval
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_err(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3)
library routines for server side remote procedure call errors
sigvec(2)
software signal facilities
sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3)
lookup name of various enumerated values
SSL_CONF_cmd_argv(3)
SSL configuration command line processing
"glEdgeFlag(3), glEdgeFlagv(3)
flag edges as either boundary or nonboundary
BSset_diagv(3)
Set the diagonal equal to a vector
ParseArgv(3)
process command-line options
SSL_CONF_cmd_argv(3)
SSL configuration command line processing
XmtDialogGetDialogValues(3), XmtDialogGetDialogValues()(3), XmtDialogSetDialogValues()(3)
transfer values between the fields of a data structure and the widgets of a dialog box
activateCDKDialog(3), activateCDKDialog destroyCDKDialog drawCDKDialog drawCDKDialogButtons eraseCDKDialog getCDKDialog getCDKDialogBox getCDKDialogHighlight getCDKDialogSeparator injectCDKDialog moveCDKDialog newCDKDialog positionCDKDialog setCDKDialog setCDKDialogBackgroundAttrib setCDKDialogBackgroundColor setCDKDialogBox setCDKDialogBox setCDKDialogBoxAttribute setCDKDialogHighlight setCDKDialogHorizontalChar setCDKDialogLLChar setCDKDialogLRChar setCDKDialogPostProcess setCDKDialogPreProcess setCDKDialogSeparator setCDKDialogULChar setCDKDialogURChar setCDKDialogVerticalChar cdk_dialog(3)
curses dialog widget
animate(1gv)
animate a sequence of geomview files
anytooff(1gv)
filter to convert a (set of) geomview data file(s) containing any geomview primitives into a single polylist
anytopl(3gv), AnyToPL(3gv)
convert an arbitrary geom to a polylist (OFF file format)
anytoucd(1gv)
filter to convert a geomview data file into a data file in the so-called 'ucd' (Unstructured Cell Data) format
argv0(1)
runs a program with a specified 0th argument
bdy(1gv)
boundary curve finder
bdy(3gv)
boundary curve finder
bez2mesh(1gv)
dices a BEZ file to a list of MESHes
bigvia(3)
draws a non minimal via as a bunch of vias man1/alc_origin.1
clig_Commandline(n), ::clig::Commandline(n)
declare variable to store concatenated argv
clip(1gv)
Clip an OOGL object against planes or other surfaces
discgrp(5gv), discrete(5gv)
group file formats
fsaparse(3gv)
parse a word-acceptor automaton file
geomutil(3gv)
various geometry utilities (introduction)
geomview(1gv), Geomview(1gv)
interactive geometry viewer
get_config_argv(3)
Reads a token list from the configuration file. Allegro game programming library
gigolo(1), Gigolo(1)
a simple frontend to easily connect to remote filesystems with GIO/GVfs
gml2gv(1), gv2gml(1)
GML-DOT converters
gpgv(1)
Verify OpenPGP signatures
gpgv2(1)
Verify OpenPGP signatures
graphml2gv(1)
GRAPHML-DOT converter
gv(1)
Postscript and PDF viewer
gv-update-userconfig(1)
update ~/.gv config file
gvc(3), libgvc(3)
Graphviz context library
gvcolor(1)
flow colors through a ranked digraph ( previously known as colorize )
gvfs(7)
GIO virtual file system
gvfs-cat(1)
Concatenate files
gvfs-copy(1)
Copy files
gvfs-info(1)
Show information about files
gvfs-less(1)
Execute less on the output of gvfs-cat
gvfs-ls(1)
List files
gvfs-mime(1)
Get or set mime handlers
gvfs-mkdir(1)
Create directories
gvfs-monitor-dir(1)
Monitor directories for changes
gvfs-monitor-file(1)
Monitor files for changes
gvfs-mount(1)
Mounts the locations
gvfs-move(1)
Copy files
gvfs-open(1)
Open files with the default handler
gvfs-rename(1)
Rename a file
gvfs-rm(1)
Delete files
gvfs-save(1)
Save standard input
gvfs-set-attribute(1)
Set file attributes
gvfs-trash(1)
Move files or directories to the trash
gvfs-tree(1)
List contents of directories in a tree-like format
gvfsd(1)
Main daemon for gvfs
gvfsd-fuse(1)
Fuse daemon for gvfs
gvfsd-metadata(1)
Metadata daemon for gvfs
gvgen(1)
generate graphs
gvhdl(1)
Frontend to the VHDL compiler/simulator FreeHDL
gvinum(8)
Logical Volume Manager control program
gvirstor(8)
control utility for virtual data storage devices
gvmap(1)
find clusters and create a geographical map highlighting clusters
gvmap.sh(1)
pipeline for running gvmap
gvnccapture(1)
VNC screenshot capture
gvpack(1)
merge and pack disjoint graphs
gvpr(1)
graph pattern scanning and processing language
gvpr(3), libgvpr(3)
library for graph filtering
gxl2gv(1), gv2gxl(1)
GXL-GV converters
hgview(1)
Qt based mercurial repository browser
hvectext(1gv)
construct Geomview VECT text object from Hershey fonts
imgvinfo(1)
extract and display interesting things from a Pilot Image Viewer pdb header, version 2.0
imgvtopnm(1)
Pilot Image Viewer pdb to PGM/PBM converter, version 2.0
imgvview(1)
tool for viewing Pilot Image Viewer files, version 2.0
kvm_getprocs(3), kvm_getargv(3), kvm_getenvv(3)
access user process state
math2oogl(1gv)
convert Mathematica grphics object to OOGL format
mm2gv(1)
Matrix Market-DOT converters
nose(1gv)
test geomview's picking facility
offconsol(1gv)
polylist consolidator
oggCut(1)
extracts parts of an ogg file (.ogv, .ogg and .oga)
oggDump(1)
prints out information of ogg video files (.ogv, .ogg or oga)
oggJoin(1), oggJOIN(1)
multiplexes ogg streams (.ogv, .ogg or oga)
oggSplit(1)
demultiplexes ogv files
oogl2rib(1gv)
convert OOGL file to RenderMan rib format
oogl2vrml(1gv)
convert OOGL to VRML
pbmtoimgv(1)
Portable Bitmap to Pilot Image Viewer converter, version 2.0
pclacgv(l), PCLACGV(l)
conjugate a complex vector of length N, sub( X ), where sub( X ) denotes X(IX,JX:JX+N-1) if INCX = DESCX( M_ ) and X(IX:IX+N-1,JX) if INCX = 1, and Notes ===== Each global data object is described by an associated description vector
pgmtoimgv(1)
Portable Graymap to Pilot Image Viewer converter, version 2.0
phk_argv(3), PhkArgvParse(3), PhkArgvFree(3)
parse argument string
plcombine(3gv), PLCombine(3gv)
polylist two polylists (OFF file format) into one
plconsol(3gv), PLConsol()(3gv)
polylist consolidator
polymerge(1gv)
merge coincident vertices, collinear edges, coplanar faces in an OOGL OFF object
ppmimgvquant(1)
palette quantifier for Pilot Image Viewer pgm files, version 2.0
procstat_close(3), procstat_freeargv(3), procstat_freeauxv(3), procstat_freeenvv(3), procstat_freefiles(3), procstat_freegroups(3), procstat_freekstack(3), procstat_freeprocs(3), procstat_freeptlwpinfo(3), procstat_freevmmap(3), procstat_get_pipe_info(3), procstat_get_pts_info(3), procstat_get_sem_info(3), procstat_get_shm_info(3), procstat_get_socket_info(3), procstat_get_vnode_info(3), procstat_getargv(3), procstat_getauxv(3), procstat_getenvv(3), procstat_getfiles(3), procstat_getgroups(3), procstat_getkstack(3), procstat_getosrel(3), procstat_getpathname(3), procstat_getprocs(3), procstat_getptlwpinfo(3), procstat_getrlimit(3), procstat_getumask(3), procstat_getvmmap(3), procstat_open_core(3), procstat_open_kvm(3), procstat_open_sysctl(3)
library interface for file and process information retrieval
pzlacgv(l), PZLACGV(l)
conjugate a complex vector of length N, sub( X ), where sub( X ) denotes X(IX,JX:JX+N-1) if INCX = DESCX( M_ ) and X(IX:IX+N-1,JX) if INCX = 1, and Notes ===== Each global data object is described by an associated description vector
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_err(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3)
library routines for server side remote procedure call errors
sigvec(2)
software signal facilities
sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3)
lookup name of various enumerated values
togeomview(1gv)
send commands or OOGL objects to geomview
ucdtooff(1gv)
filter to convert an AVS 'ucd' (Unstructured Cell Data) format file into an OFF file
vrml2oogl(1gv)
convert VRML to OOGL
zgv(1)
picture viewer for VGA/SVGA displays
ARGV::Struct(3)
Parse complex data structures passed in ARGV
App::CLI::Extension::Component::OriginalArgv(3)
for App::CLI::Extension original argv module
Bio::MAGETAB::Util::Reader::TagValueFile(3)
An abstract class providing methods for handling tab-delimited files
DateTime::Locale::gv(3)
Locale data examples for the Manx (gv) locale
DateTime::Locale::gv_IM(3)
Locale data examples for the Manx Isle of Man (gv-IM) locale
Dist::Zilla::Plugin::PkgVersion(3)
add a $VERSION to your packages
Gantry::Conf::FAQ(3)
Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ script.pl --instance=app1-dev instead of: $ script.pl --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
Getopt::ArgvFile(3)
interpolates script options from files into @ARGV or another array
JMX::Jmx4Perl::Agent::Jolokia::Verifier::GnuPGVerifier(3)
Verifies PGP signature with a natively installed GnuPG (with gpg found in the path)
Locale::Codes::LangVar(3)
standard codes for language variation identification
MooseX::App::ParsedArgv(3)
Parses @ARGV
MooseX::App::ParsedArgv::Element(3)
Parsed logical element from @ARGV
MooseX::App::ParsedArgv::Value(3)
Parsed value from @ARGV
MooseX::Getopt::ProcessedArgv(3)
MooseX::Getopt::ProcessedArgv - Class containing the results of process_argv
MooseX::Runnable::Util::ArgParser(3)
parse @ARGV for "mx-run"
Net::DNS::Check::Test::soa_serial_syntax(3)
Check if the syntax of the serial number in the SOA RR are in the AAAAMMGGVV format
Perl::Critic::Policy::InputOutput::ProhibitExplicitStdin(3)
Use "<>" or "<ARGV>" or a prompting module instead of "<STDIN>"
W3C::LogValidator(3)
The W3C Log Validator - Quality-focused Web Server log processing engine Checks quality/validity of most popular content on a Web server
W3C::LogValidator::Basic(3)
[W3C Log Validator] Sort Web server log entries by popularity (hits)
W3C::LogValidator::CSSValidator(3)
[W3C Log Validator] Batch validation of CSS style sheets (using the W3C CSS validator)
W3C::LogValidator::Config(3)
[W3C Log Validator] Configuration parser
W3C::LogValidator::HTMLValidator(3)
[W3C Log Validator] Batch HTML validation (using the W3C Markup Validator)
W3C::LogValidator::Output::HTML(3)
[W3C Log Validator] HTML Output module
W3C::LogValidator::Output::Mail(3)
[W3C Log Validator] e-mail output module
W3C::LogValidator::Output::Raw(3)
[W3C Log Validator] STDOUT (console) output module
W3C::LogValidator::SurveyEngine(3)
[W3C Log Validator] Generic Web site validity/quality survey engine
arg(3), ARGBEGIN(3), ARGEND(3), ARGC(3), ARGF(3), EARGF(3), arginit(3), argopt(3)
process option letters from argv
elgamal(3), eggen(3), egencrypt(3), egdecrypt(3), egsign(3), egverify(3), egpuballoc(3), egpubfree(3), egprivalloc(3), egprivfree(3), egsigalloc(3), egsigfree(3), egprivtopub(3)
elgamal encryption
gview(1)
interactive graph viewer
home | help