Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
usb_fifo_alloc_buffer(9), usb_fifo_attach(9), usb_fifo_detach(9), usb_fifo_free_buffer(9), usb_fifo_get_data(9), usb_fifo_get_data_buffer(9), usb_fifo_get_data_error(9), usb_fifo_get_data_linear(9), usb_fifo_put_bytes_max(9), usb_fifo_put_data(9), usb_fifo_put_data_buffer(9), usb_fifo_put_data_error(9), usb_fifo_put_data_linear(9), usb_fifo_reset(9), usb_fifo_softc(9), usb_fifo_wakeup(9), usbd_do_request(9), usbd_do_request_flags(9), usbd_errstr(9), usbd_lookup_id_by_info(9), usbd_lookup_id_by_uaa(9), usbd_transfer_clear_stall(9), usbd_transfer_drain(9), usbd_transfer_pending(9), usbd_transfer_poll(9), usbd_transfer_setup(9), usbd_transfer_start(9), usbd_transfer_stop(9), usbd_transfer_submit(9), usbd_transfer_unsetup(9), usbd_xfer_clr_flag(9), usbd_xfer_frame_data(9), usbd_xfer_frame_len(9), usbd_xfer_get_frame(9), usbd_xfer_get_priv(9), usbd_xfer_is_stalled(9), usbd_xfer_max_framelen(9), usbd_xfer_max_frames(9), usbd_xfer_max_len(9), usbd_xfer_set_flag(9), usbd_xfer_set_frame_data(9), usbd_xfer_set_frame_len(9), usbd_xfer_set_frame_offset(9), usbd_xfer_set_frames(9), usbd_xfer_set_interval(9), usbd_xfer_set_priv(9), usbd_xfer_set_stall(9), usbd_xfer_set_timeout(9), usbd_xfer_softc(9), usbd_xfer_state(9), usbd_xfer_status(9)
Universal Serial Bus driver programming interface
wake(8)
send Wake on LAN frames to hosts on a local Ethernet network
afGetFrameSize(3)
calculate the frame size in bytes for an audio track
afReadFrames(3)
read sample frames from a track in an audio file
afWriteFrames(3)
write sample frames to a track in an audio file
arcantarget_hint(3), arcantarget_hint (3)
Send a hint state through a frameserver tied to an arcan instance
atest(1)
Decode AX.25 frames from an audio file
besside-ng-crawler(1)
filter EAPOL frames from a directory of capture files
blind-crop(1)
Extract subframes for all frames
blind-cut(1)
Retain consecutive frames
blind-skip-pattern(1)
Skips frames in a video according to pattern
blind-time-blur(1)
Draw new frames on top of old frames with partial alpha
define_feedtarget(3), define_feedtarget (3)
Create a direct copy association between two frameservers
define_nulltarget(3), define_nulltarget (3)
Push an output subsegment into a target frameserver
dumpmpeg(1)
A program to dump frames from an MPEG movie
fasta36(1)
scan a protein or DNA sequence library for similar sequences fastx36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfastx36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasty36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfasty36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasts36 - compare unordered peptides to a protein sequence database fastm36 - compare ordered peptides (or short DNA sequences) to a protein (DNA) sequence database tfasts36 - compare unordered peptides to a translated DNA sequence database fastf36 - compare mixed peptides to a protein sequence database tfastf36 - compare mixed peptides to a translated DNA sequence database ssearch36 - compare a protein or DNA sequence to a sequence database using the Smith-Waterman algorithm. ggsearch36 - compare a protein or DNA sequence to a sequence database using a global alignment (Needleman-Wunsch) glsearch36 - compare a protein or DNA sequence to a sequence database with alignments that are global in the query and local in the database sequence (global-local). lalign36 - produce multiple non-overlapping alignments for protein and DNA sequences using the Huang and Miller sim algorithm for the Waterman-Eggert algorithm. prss36, prfx36 - discontinued; all the FASTA programs will estimate statistical significance using 500 shuffled sequence scores if two sequences are compared
focus_target(3), focus_target (3)
Specify a frameserver the scheduler should try and bias
frameserver_debugstall(3), frameserver_debugstall (3)
change the global delay before a frameserver executes
gen_packets(1)
Generate audio file for AX.25 frames
image_active_frame(3), image_active_frame (3)
Set the active (displayed) frame for an object with an allocated frameset
image_framecyclemode(3), image_framecyclemode (3)
Enable/Disable time-triggered active frameset frame cycling
image_framesetsize(3), image_framesetsize (3)
Allocate slots for multi-frame objects
input_target(3), input_target (3)
Forwards the specified event table to a target frameserver
launch_avfeed(3), launch_avfeed (3)
Launch a customized frameserver
launch_decode(3), launch_decode (3)
Launch a video decoding frameserver
llvm-addr2line(1)
a drop-in replacement for addr2line # llvm-addr2line - a drop-in replacement for addr2line ## SYNOPSIS llvm-addr2line [options] ## DESCRIPTION llvm-addr2line is an alias for the [llvm-symbolizer](llvm-symbolizer) tool with different defaults. The goal is to make it a drop-in replacement for GNU(aqs addr2line. Here are some of those differences: 0.0 (bu 2 Defaults not to print function names. Use [-f](llvm-symbolizer-opt-f) to enable that. (bu 2 Defaults not to demangle function names. Use [-C](llvm-symbolizer-opt-C) to switch the demangling on. (bu 2 Defaults not to print inlined frames. Use [-i](llvm-symbolizer-opt-i) to show inlined frames for a source code location in an inlined function. (bu 2 Uses [--output-style=GNU](llvm-symbolizer-opt-output-style) by default. ## SEE ALSO Refer to [llvm-symbolizer](llvm-symbolizer) for additional information
message_target(3), message_target (3)
send a utf-8 coded text message to a frameserver
net_listen(3), net_listen (3)
Setup a network frameserver in listening mode
pacify_target(3), pacify_target (3)
Sever frameserver connection from a video object
pfscat(1)
Concatenate frames in PFS stream
pfsinpfm(1)
Load images or frames in PFM format
pfsinrgbe(1)
Load images or frames in Radiance RGBE format
pfsintiff(1)
Load images or frames in several variants of TIFF format (both LDR and HDR)
pfsinyuv(1)
Read frames from a single .yuv file used by many video codecs
pfsout(1)
Read pfs frames from stdin and write them in the format determined by the extension of the file name
pfsoutpfm(1)
Write images or frames in OpenEXR format
pfsoutppm(1), pfsouttiff(1), pfsoutrgbe(1), pfsoutexr(1)
Write images or frames in one of the several formats
pfsoutrgbe(1)
Write images or frames in Radiance RGBE format
pfsoutyuv(1)
Write frames to .yuv file used by many video codecs
pfssize(1)
Resize frames
restore_target(3), restore_target (3)
Request that the target frameserver session restores from a previously made snapshot
sfeed_frames(1)
format feed data to HTML with frames
snapshot_target(3), snapshot_target (3)
Request that a frameserver serializes its internal state into the specified resource
splitshp(1)
Split Shape into frames or combine frames into Shapes
system_collapse(3), system_collapse (3)
Collapse important subsystems, leaving only frameservers alive
target_devicehint(3), target_devicehint (3)
Change connection- and device- use for a frameserver connection
target_displayhint(3), target_displayhint (3)
Send visibility / drawing hint to target frameserver
target_flags(3), target_flags (3)
Set special frameserver processing flags
target_fonthint(3), target_fonthint (3)
Send font drawing hints to target frameserver
target_framemode(3), target_framemode (3)
Hint to the target frameserver to restrict frame delivery
target_graphmode(3), target_graphmode (3)
Switch graphing mode for target frameserver
target_input(3), target_input (3)
Forward input data to a frameserver
target_parent(3), target_parent (3)
Lookup the frameserver VID of the parent to a subsegment
target_portconfig(3), target_portconfig (3)
Request that the target frameserver switch input configuration mode for a specific port
target_seek(3), target_seek (3)
Request a change playback or presentation position for a frameserver
target_updatehandler(3), target_updatehandler (3)
Change the active callback for a VID connected to a frameserver
target_verbose(3), target_verbose (3)
Increase frameserver callback verbosity
tkiptun-ng(8)
inject a few frames into a WPA TKIP network with QoS
webpmux(1)
create animated WebP files from non-animated WebP images, extract frames from animated WebP images, and manage XMP/EXIF metadata and ICC profile
zframe(3)
Class for working with single message frames
MP3::Tag::ID3v2-Data(3)
get_frame() data format and supported frames
MP3::Tag::ID3v2_Data(3)
get_frame() data format and supported frames
Net::Packet(3)
a framework to easily send and receive frames from layer 2 to layer 7
Prima::FrameSet(3)
standard frameset widget
Protocol::CassandraCQL::Frames(3), "Protocol::CassandraCQL::Frames"(3)
build or parse frame bodies for specific message types
ZoneMinder::Frame(3)
Perl Class for Frames
d.frame(1), d.frame (1)
Manages display frames on the user(cqs graphics monitor
frame(3), frinit(3), frsetrects(3), frinittick(3), frclear(3), frcharofpt(3), frptofchar(3), frinsert(3), frdelete(3), frselect(3), frtick(3), frselectpaint(3), frdrawsel(3), frdrawsel0(3), frgetmouse(3)
frames of text
gmx-extract-cluster(1)
Allows extracting frames corresponding to clusters from trajectory
window_frame(1)
Creates a BRL-CAD .g file containing window frames
home | help