Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SYSCTL_DECL(9), SYSCTL_ADD_BOOL(9), SYSCTL_ADD_COUNTER_U64(9), SYSCTL_ADD_COUNTER_U64_ARRAY(9), SYSCTL_ADD_INT(9), SYSCTL_ADD_LONG(9), SYSCTL_ADD_NODE(9), SYSCTL_ADD_NODE_WITH_LABEL(9), SYSCTL_ADD_OPAQUE(9), SYSCTL_ADD_PROC(9), SYSCTL_ADD_QUAD(9), SYSCTL_ADD_ROOT_NODE(9), SYSCTL_ADD_S8(9), SYSCTL_ADD_S16(9), SYSCTL_ADD_S32(9), SYSCTL_ADD_S64(9), SYSCTL_ADD_SBINTIME_MSEC(9), SYSCTL_ADD_SBINTIME_USEC(9), SYSCTL_ADD_STRING(9), SYSCTL_ADD_CONST_STRING(9), SYSCTL_ADD_STRUCT(9), SYSCTL_ADD_TIMEVAL_SEC(9), SYSCTL_ADD_U8(9), SYSCTL_ADD_U16(9), SYSCTL_ADD_U32(9), SYSCTL_ADD_U64(9), SYSCTL_ADD_UAUTO(9), SYSCTL_ADD_UINT(9), SYSCTL_ADD_ULONG(9), SYSCTL_ADD_UMA_CUR(9), SYSCTL_ADD_UMA_MAX(9), SYSCTL_ADD_UQUAD(9), SYSCTL_CHILDREN(9), SYSCTL_STATIC_CHILDREN(9), SYSCTL_NODE_CHILDREN(9), SYSCTL_PARENT(9), SYSCTL_BOOL(9), SYSCTL_COUNTER_U64(9), SYSCTL_COUNTER_U64_ARRAY(9), SYSCTL_INT(9), SYSCTL_INT_WITH_LABEL(9), SYSCTL_LONG(9), sysctl_msec_to_ticks(9), SYSCTL_NODE(9), SYSCTL_NODE_WITH_LABEL(9), SYSCTL_OPAQUE(9), SYSCTL_PROC(9), SYSCTL_QUAD(9), SYSCTL_ROOT_NODE(9), SYSCTL_S8(9), SYSCTL_S16(9), SYSCTL_S32(9), SYSCTL_S64(9), SYSCTL_SBINTIME_MSEC(9), SYSCTL_SBINTIME_USEC(9), SYSCTL_STRING(9), SYSCTL_CONST_STRING(9), SYSCTL_STRUCT(9), SYSCTL_TIMEVAL_SEC(9), SYSCTL_U8(9), SYSCTL_U16(9), SYSCTL_U32(9), SYSCTL_U64(9), SYSCTL_UINT(9), SYSCTL_ULONG(9), SYSCTL_UMA_CUR(9), SYSCTL_UMA_MAX(9), SYSCTL_UQUAD(9)
Dynamic and static sysctl MIB creation functions
VFS_QUOTACTL(9)
manipulate file system quotas
VOP_IOCTL(9)
device specific control
auditctl(2)
configure system audit parameters
bectl(8)
Utility to manage boot environments on ZFS
bhyvectl(8)
control utility for bhyve instances
binmiscctl(8)
manage binary image activators
blackhole(4)
a sysctl(8) MIB for manipulating behaviour in respect of refused SCTP, TCP, or UDP connection attempts
blacklistctl(8)
display and change the state of blacklistd
cap_ioctls_limit(2), cap_ioctls_get(2)
manage allowed ioctl commands
cap_sysctl(3)
library for getting or setting system information in capability mode
caph_limit_stream(3), caph_limit_stdin(3), caph_limit_stderr(3), caph_limit_stdout(3), caph_limit_stdio(3), caph_stream_rights(3), caph_cache_tzdata(3), caph_cache_catpages(3), caph_enter(3), caph_enter_casper(3), caph_rights_limit(3), caph_ioctls_limit(3), caph_fcntls_limit(3)
set of the capsicum helpers, part of the libcapsicum
certctl(8)
tool for managing trusted and blacklist TLS certificates
cpucontrol(8)
control utility for the cpuctl(4) device
cpuctl(4)
cpuctl pseudo device
ctl(4)
CAM Target Layer
ctl.conf(5)
CAM Target Layer / iSCSI target daemon configuration file
ctladm(8)
CAM Target Layer control utility
ctld(8)
CAM Target Layer / iSCSI target daemon
ctlstat(8)
CAM Target Layer statistics utility
delay_output(3), filter(3), flushinp(3), getwin(3), key_name(3), keyname(3), nofilter(3), putwin(3), unctrl(3), use_env(3), use_tioctl(3), wunctrl(3)
miscellaneous curses utility routines
devctl(3), devctl_attach(3), devctl_clear_driver(3), devctl_delete(3), devctl_detach(3), devctl_disable(3), devctl_enable(3), devctl_freeze(3), devctl_rescan(3), devctl_reset(3), devctl_resume(3), devctl_set_driver(3), devctl_suspend(3), devctl_thaw(3)
device control library
devctl(4)
device event reporting and device control interface
devctl(8)
device control utility
devctl_notify(9)
Send a message, via devctl, to userland
devctl_process_running(9)
Returns true when devctl has a consumer process running
devctl_safe_quote_sb(9)
Insert a string, properly quoted, into a sbuf
device_get_sysctl_ctx(9), device_get_sysctl_tree(9)
manipulate the sysctl oid tree for driver specific sysctl nodes
domain_add(9), pfctlinput(9), pffinddomain(9), pffindproto(9), pffindtype(9), DOMAIN_SET(9)
network domain management
elfctl(1)
change an ELF binary's feature control note
extattrctl(8)
manage UFS1 extended attributes
flowctl(8)
ng_netflow(4) control utility
geom_stats_open(3), geom_stats_close(3), geom_stats_resync(3), geom_stats_snapshot_get(3), geom_stats_snapshot_free(3), geom_stats_snapshot_timestamp(3), geom_stats_snapshot_reset(3), geom_stats_snapshot_next(3), gctl_get_handle(3), gctl_ro_param(3), gctl_rw_param(3), gctl_issue(3), gctl_free(3), gctl_dump(3), geom_getxml(3), geom_xml2tree(3), geom_gettree(3), geom_deletetree(3), g_open(3), g_close(3), g_mediasize(3), g_sectorsize(3), g_stripeoffset(3), g_stripesize(3), g_flush(3), g_delete(3), g_device_path(3), g_get_ident(3), g_get_name(3), g_open_by_ident(3), g_providername(3)
userland API library for kernel GEOM subsystem
gpioctl(8)
GPIO control utility
hast.conf(5)
configuration file for the hastd(8) daemon and the hastctl(8) utility
hastctl(8)
Highly Available Storage control utility
hosts_access(3), hosts_ctl(3), request_init(3), request_set(3)
access control library
iconvctl(3)
controlling and diagnostical facility for iconv(3)
ioctl(2)
control device
iovctl(8)
PCI SR-IOV configuration utility
iovctl.conf(5)
IOVCTL configuration file
ip6addrctl(8)
configure address selection policy for IPv6 and IPv4
iscsictl(8)
iSCSI initiator management utility
k_hasafs(3), k_hasafs_recheck(3), k_pioctl(3), k_unlog(3), k_setpag(3), k_afs_cell_of_file(3), kafs_set_verbose(3), kafs_settoken_rxkad(3), kafs_settoken(3), krb_afslog(3), krb_afslog_uid(3), kafs_settoken5(3), krb5_afslog(3), krb5_afslog_uid(3)
AFS library
manctl(8)
manipulating manual pages
mlx5io(4)
IOCTL interface to manage Connect-X 4/5/6 Mellanox network adapters
msgctl(2)
message control operations
ngctl(8)
netgraph control utility
pfctl(8)
control the packet filter (PF) device
pfilctl(8)
pfil(9) control utility
pppctl(8)
PPP control program
procctl(2)
control processes
procstat_close(3), procstat_freeargv(3), procstat_freeauxv(3), procstat_freeenvv(3), procstat_freefiles(3), procstat_freegroups(3), procstat_freekstack(3), procstat_freeprocs(3), procstat_freeptlwpinfo(3), procstat_freevmmap(3), procstat_get_pipe_info(3), procstat_get_pts_info(3), procstat_get_sem_info(3), procstat_get_shm_info(3), procstat_get_socket_info(3), procstat_get_vnode_info(3), procstat_getargv(3), procstat_getauxv(3), procstat_getenvv(3), procstat_getfiles(3), procstat_getgroups(3), procstat_getkstack(3), procstat_getosrel(3), procstat_getpathname(3), procstat_getprocs(3), procstat_getptlwpinfo(3), procstat_getrlimit(3), procstat_getumask(3), procstat_getvmmap(3), procstat_open_core(3), procstat_open_kvm(3), procstat_open_sysctl(3)
library interface for file and process information retrieval
prometheus_sysctl_exporter(8)
print kernel state as Prometheus metrics
quotactl(2)
manipulate file system quotas
rctl(4)
resource limits
rctl(8)
display and update resource limits database
rctl.conf(5)
resource limits database defaults
rctl_add_rule(2), rctl_get_limits(2), rctl_get_racct(2), rctl_get_rules(2), rctl_remove_rule(2)
manipulate and query the resource limits database
rtadvctl(8)
control program for rtadvd(8) daemon
sbuf(9), sbuf_new(9), sbuf_new_auto(9), sbuf_new_for_sysctl(9), sbuf_clear(9), sbuf_get_flags(9), sbuf_set_flags(9), sbuf_clear_flags(9), sbuf_setpos(9), sbuf_bcat(9), sbuf_bcopyin(9), sbuf_bcpy(9), sbuf_cat(9), sbuf_copyin(9), sbuf_cpy(9), sbuf_nl_terminate(9), sbuf_printf(9), sbuf_vprintf(9), sbuf_putc(9), sbuf_set_drain(9), sbuf_trim(9), sbuf_error(9), sbuf_finish(9), sbuf_data(9), sbuf_len(9), sbuf_done(9), sbuf_delete(9), sbuf_start_section(9), sbuf_end_section(9), sbuf_hexdump(9), sbuf_printf_drain(9), sbuf_putbuf(9)
safe string composition
semctl(2)
control operations on a semaphore set
shmctl(2)
shared memory control
swapon(8), swapoff(8), swapctl(8)
specify devices for paging and swapping
syncache(4), syncookies(4)
sysctl(8) MIBs for controlling TCP SYN caching
sysctl(3), sysctlbyname(3), sysctlnametomib(3)
get or set system information
sysctl(8)
get or set kernel state
sysctl.conf(5)
kernel state defaults
sysctl_add_oid(9), sysctl_move_oid(9), sysctl_remove_oid(9), sysctl_remove_name(9)
runtime sysctl tree manipulation
sysctl_ctx_init(9), sysctl_ctx_free(9), sysctl_ctx_entry_add(9), sysctl_ctx_entry_find(9), sysctl_ctx_entry_del(9)
sysctl context for managing dynamically created sysctl OIDs
sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3)
lookup name of various enumerated values
sysdecode_ioctlname(3)
lookup name of device control command
sysdecode_quotactl_cmd(3)
output name of quotactl command
uhsoctl(1)
connection utility for Option based devices
usbhidctl(1)
manipulate USB HID devices
valectl(8)
manage VALE switches provided by netmap
zonectl(8)
Shingled Magnetic Recording Zone Control utility
CTLOG_STORE_get0_log_by_id(3)
Get a Certificate Transparency log from a CTLOG_STORE
CTLOG_STORE_new(3), CTLOG_STORE_free(3), CTLOG_STORE_load_default_file(3), CTLOG_STORE_load_file(3)
Create and populate a Certificate Transparency log list
CTLOG_new(3), CTLOG_new_from_base64(3), CTLOG_free(3), CTLOG_get0_name(3), CTLOG_get0_log_id(3), CTLOG_get0_public_key(3)
encapsulates information about a Certificate Transparency log
CT_POLICY_EVAL_CTX_new(3), CT_POLICY_EVAL_CTX_free(3), CT_POLICY_EVAL_CTX_get0_cert(3), CT_POLICY_EVAL_CTX_set1_cert(3), CT_POLICY_EVAL_CTX_get0_issuer(3), CT_POLICY_EVAL_CTX_set1_issuer(3), CT_POLICY_EVAL_CTX_get0_log_store(3), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3), CT_POLICY_EVAL_CTX_get_time(3), CT_POLICY_EVAL_CTX_set_time(3)
Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
SSL_CTX_set_default_ctlog_list_file(3), SSL_CTX_set_ctlog_list_file(3)
load a Certificate Transparency log list from a file
BSpar_sym_solve(3)
Solve a symmetric positive definite system of equations using conjugate gradients preconditioned by one of several preconditioners. The rhs can be a block of vectors. The user should not call this function directly, but BSpar_solve()
CTLOG_STORE_get0_log_by_id(3)
Get a Certificate Transparency log from a CTLOG_STORE
CTLOG_STORE_get0_log_by_id(3ossl)
Get a Certificate Transparency log from a CTLOG_STORE
CTLOG_STORE_new(3), CTLOG_STORE_free(3), CTLOG_STORE_load_default_file(3), CTLOG_STORE_load_file(3)
Create and populate a Certificate Transparency log list
CTLOG_STORE_new_ex(3ossl), CTLOG_STORE_new(3ossl), CTLOG_STORE_free(3ossl), CTLOG_STORE_load_default_file(3ossl), CTLOG_STORE_load_file(3ossl)
Create and populate a Certificate Transparency log list
CTLOG_new(3), CTLOG_new_from_base64(3), CTLOG_free(3), CTLOG_get0_name(3), CTLOG_get0_log_id(3), CTLOG_get0_public_key(3)
encapsulates information about a Certificate Transparency log
CTLOG_new_ex(3ossl), CTLOG_new(3ossl), CTLOG_new_from_base64(3ossl), CTLOG_new_from_base64_ex(3ossl), CTLOG_free(3ossl), CTLOG_get0_name(3ossl), CTLOG_get0_log_id(3ossl), CTLOG_get0_public_key(3ossl)
encapsulates information about a Certificate Transparency log
CT_POLICY_EVAL_CTX_new(3), CT_POLICY_EVAL_CTX_free(3), CT_POLICY_EVAL_CTX_get0_cert(3), CT_POLICY_EVAL_CTX_set1_cert(3), CT_POLICY_EVAL_CTX_get0_issuer(3), CT_POLICY_EVAL_CTX_set1_issuer(3), CT_POLICY_EVAL_CTX_get0_log_store(3), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3), CT_POLICY_EVAL_CTX_get_time(3), CT_POLICY_EVAL_CTX_set_time(3)
Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
CT_POLICY_EVAL_CTX_new_ex(3ossl), CT_POLICY_EVAL_CTX_new(3ossl), CT_POLICY_EVAL_CTX_free(3ossl), CT_POLICY_EVAL_CTX_get0_cert(3ossl), CT_POLICY_EVAL_CTX_set1_cert(3ossl), CT_POLICY_EVAL_CTX_get0_issuer(3ossl), CT_POLICY_EVAL_CTX_set1_issuer(3ossl), CT_POLICY_EVAL_CTX_get0_log_store(3ossl), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3ossl), CT_POLICY_EVAL_CTX_get_time(3ossl), CT_POLICY_EVAL_CTX_set_time(3ossl)
Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
CURLOPT_IOCTLDATA(3)
custom pointer passed to I/O callback
CURLOPT_IOCTLFUNCTION(3)
callback for I/O operations
SDL_LockSurface(3)
Lock a surface for directly access
SSL_CTX_set_default_ctlog_list_file(3), SSL_CTX_set_ctlog_list_file(3)
load a Certificate Transparency log list from a file
SSL_CTX_set_default_ctlog_list_file(3ossl), SSL_CTX_set_ctlog_list_file(3ossl)
load a Certificate Transparency log list from a file
XkbAllocIndicatorMaps(3)
Allocates, directly, the indicators member of the keyboard description record
XtCallActionProc(3)
invoke an action procedure directly
activateCDKFselect(3), activateCDKFselect deleteFileCB destroyCDKFselect drawCDKFselect eraseCDKFselect getCDKFselectBox getCDKFselectContents getCDKFselectCurrentItem getCDKFselectDirAttribute getCDKFselectDirContents getCDKFselectDirectory getCDKFselectFileAttribute getCDKFselectFillerChar getCDKFselectHighlight getCDKFselectLinkAttribute getCDKFselectSocketAttribute injectCDKFselect moveCDKFselect newCDKFselect positionCDKFselect setCDKFselect setCDKFselectBackgroundAttrib setCDKFselectBackgroundColor setCDKFselectBox setCDKFselectBoxAttribute setCDKFselectContents setCDKFselectCurrentItem setCDKFselectDirAttribute setCDKFselectDirContents setCDKFselectDirectory setCDKFselectFileAttribute setCDKFselectFillerChar setCDKFselectHighlight setCDKFselectHorizontalChar setCDKFselectLLChar setCDKFselectLRChar setCDKFselectLinkAttribute setCDKFselectSocketAttribute setCDKFselectULChar setCDKFselectURChar setCDKFselectVerticalChar cdk_fselect(3)
curses file selector widget
alsactl(1)
advanced controls for ALSA soundcard driver
amtapetype(8)
generate a tapetype definition by testing the device directly
anjuta-launcher(1)
GNOME Integrated Development Environment anjuta-launcher normally is not called directly by the user but invoked by anjuta
apachectl(8)
Apache HTTP Server Control Interface
asmctl(1)
controlling keyboard backlight and LCD backlight
auctl(1)
control various audio server parameters
auditctl(2)
configure system audit parameters
bgpctl(8)
control the Border Gateway Protocol daemon
cdctl(1), eject(1), pause(1)
specify commands for autocd daemon control utility
cec-ctl(1)
An application to control cec devices
ceylon-compile(1), ceylon compile(1)
Compiles Ceylon and Java source code and directly produces module and source archives in a module repository
ceylon-compile-js(1), ceylon compile-js(1)
Compiles Ceylon source code to JavaScript and directly produces module and source archives in a module repository
collectdctl(1)
Control interface for collectd
confctl(1)
sysctl-like tool for config files
configctl(1)
Generic tool to parse and update configuration files
control.ctl(5)
Specify handling of Usenet control messages
corosync-cmapctl(8), corosync-cmapctl:(8)
A tool for accessing the object database
ctl(5)
Control Temporal Logic file format. man1/alc_origin.1
ctl(5)
interface for examination and modification of the library's internal state
ctlinnd(8)
Control the main InterNetNews daemon
ctluser(8)
control lusers
cual(6), Cual(6)
Cuyo Animation Language Cual is the main language used to describe the animations in cuyo. Strictly speaking it's the stuff between the << >> brackets in the level description files (xxx.ld). On the other hand this man page aims at being a complete description of how to write levels for cuyo. But it's still under construction. See the file "example.ld" to get an idea of how the rest of the level description works. There's also a bit of example Cual code in "example.ld". And of course, all the existing levels are examples. Note that Cual is probably still very buggy. So if strange things happen and you're sure it's not your fault, tell me (cuyo@karimmi.de)
cupsctl(8)
configure cupsd.conf options
darktable-cmstest(1)
test if the color management subsystem of your computer is correctly configured
ddptctl(8)
helper/auxiliary utility for ddpt
delay_output(3x), filter(3x), flushinp(3x), getwin(3x), key_name(3x), keyname(3x), nofilter(3x), putwin(3x), unctrl(3x), use_env(3x), use_tioctl(3x), wunctrl(3x)
miscellaneous curses utility routines
desktopctl(1)
Control interface for the desktop manager
dgrpctl(8)
add, delete and modify newsgroups in the active file
dhcp6ctl(8)
DHCPv6 client and server control utility
dhcp_probe(8)
locate DCHP and BootP servers on a directly-attached network
dhcpctl(3), dhcpctl_initialize(3)
dhcpctl library initialization
dictl(1)
wrapper script for dict that permits using utf-8 encoded dictionaries on a terminal that is not utf-8 aware
doverctl(8)
Perform functions on the overview directory and file structure
dunstctl(1)
Command line control utility for dunst, a customizable and lightweight notification-daemon
dvipdfmx(1), xdvipdfmx(1), dvipdfm(1)
produce PDF files directly from DVI files
dx(l)
start the Data Explorer visualization system. Optionally directly start the User Interface (dxui), the executive (dxexec), the Data Prompter, the Module Builder or the Tutorial
encfsctl(1)
administrative tool for working with EncFS filesystems
exflame(3)
How to write directly to video memory improving performance. Allegro game programming library
expire.ctl(5)
Configuration file for article expiration
explain_ioctl(3)
explain ioctl(2) errors require_index { }
explain_ioctl_or_die(3)
control device and report errors require_index { "control device and report errors" }
explain_shmctl(3)
explain shmctl(2) errors require_index { }
explain_shmctl_or_die(3)
shared memory control and report errors require_index { "shared memory control and report errors" }
fnottctl(1)
utility to interact with fnott(1)
foot-ctlseqs(7)
terminal control sequences supported by foot
ftpdctl(8)
ProFTPD control program
gdnsdctl(8)
Control socket client for gdnsd
gen-ctl-io(1)
generate C interface code for libctl control files
gpsctl(1)
control the modes of a GPS
gpsdctl(8)
tool for sending commands to gpsd over its control socket
hastmon.conf(5)
configuration file for the hastmon(8) deamon and the hastmonctl(8) utility
hastmonctl(8)
hastmon control utility
hcdplay(1)
Control autonomous CDDA playback using Linux CDROM ioctls
honeydctl(1)
Honey Control
iconvctl(3)
control iconv behavior
ikectl(8)
control the IKEv2 daemon
immortalctl(8)
control services started by immortal(8)
innwatch.ctl(5)
control Usenet supervision by innwatch
ipactl(8)
-- control utility for ipa(8)
ir-ctl(1)
a swiss-knife tool to handle raw IR and to set lirc options
isablequalexpr(3)
tests if two expressions are strictly identicals. man1/alc_origin.1
k_hasafs(3), k_hasafs_recheck(3), k_pioctl(3), k_unlog(3), k_setpag(3), k_afs_cell_of_file(3), kafs_set_verbose(3), kafs_settoken_rxkad(3), kafs_settoken(3), krb_afslog(3), krb_afslog_uid(3), kafs_settoken5(3), krb5_afslog(3), krb5_afslog_uid(3)
AFS library
kamctl(8)
Kamailio control tool
kamdbctl(8)
Kamailio database control tool
lldpcli(8), lldpctl(8)
control LLDP daemon
lli-devel(1), lli(1)
directly execute programs from LLVM bitcode
lli10(1), lli(1)
directly execute programs from LLVM bitcode
lli11(1), lli(1)
directly execute programs from LLVM bitcode
lli12(1), lli(1)
directly execute programs from LLVM bitcode
lli70(1), lli(1)
directly execute programs from LLVM bitcode
lli80(1), lli(1)
directly execute programs from LLVM bitcode
lli90(1), lli(1)
directly execute programs from LLVM bitcode
lxpanelctl(1)
controller for lxpanel
mailestctl(1)
control the mailest
makoctl(1)
controls the mako(1) daemon
memcached_generate_hash(3)
Generating hash values directly rst2man-indent-level 0 1 rstReportMargin \$1
memcached_generate_hash_value(3)
Generating hash values directly rst2man-indent-level 0 1 rstReportMargin \$1
msxlint(1)
detects incorrectly formatted notes lines in a MusiXTeX source file
nbdkit-tls(1)
authentication and encryption of NBD connections (sometimes incorrectly called "SSL")
newsctl(5)
USENET network news control files
nntpsend.ctl(5)
List of sites to feed via nntpsend
nocem.ctl(5), perl-nocem(5)
A NoCeM-on-spool implementation for INN 2.x
nsysctl(8)
get or set system state
ntpctl(8)
control the Network Time Protocol daemon
occtl(8)
OpenConnect VPN server control tool
ovs-dpctl(8)
administer Open vSwitch datapaths
ovs-dpctl-top(8)
Top like behavior for ovs-dpctl dump-flows
ovs-kmod-ctl(8)
OVS startup helper script for loading kernel modules
ovs-ofctl(8)
administer OpenFlow switches
ovs-vsctl(8)
utility for querying and configuring ovs-vswitchd
ovs-vswitchd.conf.db(5), ovs-vswitchd[char46]conf[char46]db(5)
Open_vSwitch database schema A database with this schema holds the configuration for one Open vSwitch daemon[char46] The top-level configuration for the daemon is the Open_vSwitch table, which must have exactly one record[char46] Records in other tables are significant only when they can be reached directly or indirectly from the Open_vSwitch table[char46] Records that are not reachable from the Open_vSwitch table are automatically deleted from the database, except for records in a few distinguished ``root set(cq(cq tables[char46]
pactl(1)
Control a running PulseAudio sound server
page_cert(3), page_certThe basic certificate(3)
The basic hx509 cerificate object in hx509 is hx509_cert. The hx509_cert object is representing one X509/PKIX certificate and associated attributes; like private key, friendly name, etc. A hx509_cert object is usully found via the keyset interfaces (Certificate store operations), but its also possible to create a certificate directly from a parsed object with hx509_cert_init() and hx509_cert_init_data(). See the library functions here: hx509 certificate functions
pdnsd-ctl(8)
controls pdnsd
penctl(1)
control a running pen load balancer
perpctl(8)
runtime control utility for perpd (8) services
pg_ctl(1)
initialize, start, stop, or control a PostgreSQL server
playerctl(1)
control media players via MPRIS
pmemblk_ctl_get(3), pmemblk_ctl_get()(3), pmemblk_ctl_set()(3), pmemblk_ctl_exec()(3)
Query and modify libpmemblk internal behavior (EXPERIMENTAL)
pmemlog_ctl_get(3), pmemlog_ctl_get()(3), pmemlog_ctl_set()(3), pmemlog_ctl_exec()(3)
Query and modify libpmemlog internal behavior (EXPERIMENTAL)
pmemobj_ctl_get(3), pmemobj_ctl_get()(3), pmemobj_ctl_set()(3), pmemobj_ctl_exec()(3)
Query and modify libpmemobj internal behavior (EXPERIMENTAL)
poundctl(8)
control the pound(8) daemon
prosodyctl(1)
Manage a Prosody XMPP server
puppet(8)
Usage: puppet subcommand [options] action [options] Available subcommands: Common: agent The puppet agent daemon apply Apply Puppet manifests locally config Interact with Puppet's settings. help Display Puppet help. lookup Interactive Hiera lookup module Creates, installs and searches for modules on the Puppet Forge. resource The resource abstraction layer shell Specialized: catalog Compile, save, view, and convert catalogs. describe Display help about resource types device Manage remote network devices doc Generate Puppet references epp Interact directly with the EPP template parser/renderer. facts Retrieve and store facts. filebucket Store and retrieve files in a filebucket generate Generates Puppet code from Ruby definitions. node View and manage node definitions. parser Interact directly with the parser. plugin Interact with the Puppet plugin system. script Run a puppet manifests as a script without compiling a catalog ssl Manage SSL keys and certificates for puppet SSL clients See 'puppet help subcommand action' for help on a specific subcommand action. See 'puppet help subcommand' for help on a specific subcommand. Puppet v7.8.0
puppet-epp(8)
Interact directly with the EPP template parser/renderer
puppet-parser(8)
Interact directly with the parser
pvm_precv(3)
Receive a message directly into a buffer
qctl(8)
control tool for qico ftn mailer
qjackctl(1)
User interface for controlling JACK (Jack Audio Connection Kit)
qmidictl(1)
A MIDI Remote Controller via UDP/IP Multicast
rabbitmqctl(8)
tool for managing RabbitMQ nodes
racoonctl(8)
racoon administrative control tool
radctl(8)
Radius daemon control interface
relayctl(8)
control the relay daemon
rigctl(1)
control radio transceivers and receivers
rigctl-wsjtx(1)
Hamlib 4 rigctld server
rigctlcom-wsjtx(1)
Hamlib 4 rigctlcom Serial port passthru Kenwood TS-2000 emulator
rigctld(1)
TCP radio control daemon
rigctld-wsjtx(1)
Hamlib 4 rigctld server
roboctl(3), Robot(3)
Communication API
rotctl(1)
control antenna rotators
rotctld(1)
TCP rotator control daemon
sayonara-ctl(1)
control sayonara via dbus
sf_malloc(3), sf_calloc(3), sf_realloc(3), sf_strdup(3), strndup(3), strfunc_ctl(3)
string duplication and safe memory allocation
sg_bg_ctl(8)
send SCSI BACKGROUND CONTROL command
sg_stream_ctl(8)
send SCSI STREAM CONTROL or GET STREAM STATUS command
slurm_free_ctl_conf(3), slurm_load_ctl_conf(3), slurm_print_ctl_conf(3)
Slurm information reporting functions
slurmctld(8)
The central management daemon of Slurm
smartctl(8)
Control and Monitor Utility for SMART Disks
smbtar(1)
shell script for backing up SMB/CIFS shares directly to UNIX tape drives
smtpctl(8), mailq(8)
control the Simple Mail Transfer Protocol daemon
softflowctl(8)
Remote control program for softflowd
spmdctl(8)
Control spmd
sssctl(8)
SSSD control and status utility
statgrab(1)
sysctl-style interface to system statistics
stdlogctl(1)
utility for the standard logging library rst2man-indent-level 0 1 rstReportMargin \$1
suricatactl(1)
Suricata Control rst2man-indent-level 0 1 rstReportMargin \$1
suricatactl-filestore(1)
Perform actions on filestore rst2man-indent-level 0 1 rstReportMargin \$1
swanctl(8)
strongSwan configuration, control and monitoring command line interface
swanctl.conf(5)
swanctl configuration file
sweep-ctl(1)
get and set Sweep LiDAR hardware properties
sysctlinfo(3), SYSCTLINFO(3), SYSCTLINFO_BYNAME(3), SYSCTLINFO_DESOBJ(3), SYSCTLINFO_DESOBJ_NEXTOID(3), SYSCTLINFO_DESOBJ_NEXTNAME(3)
sysctl MIB-Tree interface
sysctlinfo(4)
sysctl MIB-Tree Interface
sysctlmibinfo(3), SYSCTLMIF_VERSION(3), SYSCTLMIF_MAXIDLEVEL(3), sysctlmif_nametoid(3), sysctlmif_name(3), SYSCTLMIF_NAMELEN(3), sysctlmif_desc(3), SYSCTLMIF_DESCLEN(3), sysctlmif_label(3), SYSCTLMIF_LABELLEN(3), sysctlmif_info(3), SYSCTLMIF_INFOKIND(3), SYSCTLMIF_INFOTYPE(3), SYSCTLMIF_INFOFLAGS(3), SYSCTLMIF_INFOFMT(3), sysctlmif_nextnode(3), sysctlmif_nextleaf(3), sysctlmif_object(3), sysctlmif_freeobject(3), sysctlmif_filterlist(3), SYSCTLMIF_LIST(3), SYSCTLMIF_MAXDEPTH(3), sysctlmif_grouplist(3), sysctlmif_freelist(3), sysctlmif_tree(3), sysctlmif_freetree(3), sysctlmif_mib(3), sysctlmif_freemib(3)
sysctl MIB-Tree API
sysctlmibinfo2(3), SYSCTLMIF_VERSION(3), sysctlmif_name(3), sysctlmif_oidbyname(3), sysctlmif_oidextendedbyname(3), sysctlmif_desc(3), sysctlmif_descbyname(3), sysctlmif_label(3), sysctlmif_labelbyname(3), sysctlmif_fmt(3), sysctlmif_fmtbyname(3), sysctlmif_hashandler(3), sysctlmif_hashandlerbyname(3), sysctlmif_kind(3), sysctlmif_kindbyname(3), SYSCTLMIF_KINDTYPE(3), SYSCTLMIF_KINDFLAGS(3), sysctlmif_nextnode(3), sysctlmif_nextnodebyname(3), sysctlmif_nextleaf(3), sysctlmif_nextleafbyname(3), sysctlmif_object(3), sysctlmif_objectbyname(3), sysctlmif_freeobject(3), sysctlmif_list(3), sysctlmif_grouplist(3), sysctlmif_grouplistbyname(3), sysctlmif_leaves(3), sysctlmif_leavesbyname(3), sysctlmif_freelist(3), sysctlmif_tree(3), sysctlmif_treebyname(3), sysctlmif_freetree(3), sysctlmif_mib(3), sysctlmif_freemib(3)
sysctl MIB-Tree API
syslog-ng-ctl(1)
Display message statistics and enable verbose, debug and trace modes in
tarantoolctl(1)
a utility to control Tarantool instances
taskdctl(1)
Taskserver control program
ttservctl(8), ttserctl(8)
the startup script of the server of Tokyo Tyrant
udisksctl(1)
The udisks command line tool
upsdrvctl(8)
UPS driver controller
upsdrvsvcctl(8)
UPS driver service instance controller
v4l2-ctl(1)
An application to control video4linux drivers
vde_tunctl(8)
create and manage persistent TUN/TAP interfaces
virt-pki-validate(1)
validate libvirt PKI files are configured correctly
vmixctl(8)
Open Sound System utility to control the vmix subsystem
vtep-ctl(8)
utility for querying and configuring a VTEP database
wlrctl(1)
A command line utility for miscellaneous wlroots extensions
xawtv-remote(1)
v4lctl -- control video4linux devices
xdpr(1)
dump an X window directly to a printer
zeekctl(8)
interactive shell for managing Zeek installations
zoneminder-zmsystemctl.pl(8), zmsystemctl.pl(8)
ZoneMinder systemctl wrapper
zshcompctl(1)
zsh programmable completion
App::Control(3)
Perl module for apachectl style control of another script or executable
BSD::Sysctl(3)
Manipulate kernel sysctl variables on BSD-like systems
Crypt::DH::GMP(3)
Crypt::DH Using GMP Directly
DBIx::Class::Helper::Schema::GenerateSource(3)
Generate sources directly from your Schema
Event(3), Win(3), eventfmt(3), newwin(3), pipetowin(3), pipewinto(3), sysrun(3), winaddr(3), winclosefiles(3), winctl(3), windel(3), windeleteall(3), windows(3), wineventchan(3), winfd(3), winfree(3), winmread(3), winname(3), winopenfd(3), winprint(3), winread(3), winreadaddr(3), winreadevent(3), winseek(3), winwrite(3), winwriteevent(3)
acme client library
Finance::Quote::USFedBonds(3)
Get US Federal Bond redemption values directly from the treasury at www.publicdebt.treas.gov/sav/savvalue.htm
Gantry::Conf::FAQ(3)
Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ script.pl --instance=app1-dev instead of: $ script.pl --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
Genezzo::PushHash::HPHRowBlk(3), Genezzo::PushHash::HPHRowBlk.pm(3)
a 90% pure virtual class module that extends hierarchical "push hash" Genezzo::PushHash::hph with Row/Block methods. These methods facilitate the construction of classes that manipulate data blocks directly, such as index access methods and functions that split rows over multiple blocks
Gtk2::GladeXML(3)
(DEPRECATED) Create user interfaces directly from Glade XML files
HTML::Widgets::SelectLayers(3)
Perl extension for selectable HTML layers
JSON::Path::Tokenizer(3)
Helper class for JSON::Path::Evaluator. Do not call directly
JSON::XS(3)
JSON serialising/deserialising, done correctly and fast JSON::XS - 正しくて高速な JSON シリアライザ/デシリアライザ (http://fleur.hio.jp/perldoc/mix/lib/JSON/XS.html)
Lingua::EN::NameCase(3)
Correctly case a person's name from UPERCASE or lowcase
Log::Log4perl::Filter::LevelMatch(3)
Filter to match the log level exactly
MCE::Subs(3)
Exports functions mapped directly to MCE methods
Mail::Alias(3)
Maniulates mail alias files of various formats. Works on files directly or loads files into memory and works on the buffer
Math::GSL::Heapsort(3)
Functions for sorting data, both directly and indirectly (using an index)
McBain::Directly(3)
Use a McBain API directly from Perl code
Net::DRI::Protocol::EPP::Extensions::Afilias(3)
Afilias (.ORG & various ccTLDs) EPP extensions for Net::DRI
Net::Syslog(3)
Perl extension for sending syslog messages directly to a remote syslogd
Perl::Critic::Policy::ValuesAndExpressions::RestrictLongStrings(3)
Stop mixing long strings with code
RDF::Query::Compiler::SQL(3)
Compile a SPARQL query directly to SQL
Rex::Commands::Sysctl(3)
Manipulate sysctl
Rose::HTML::Form::Field::PhoneNumber::US(3)
Text field that accepts only input that contains exactly 10 digits, and coerces valid input into US phone numbers in the form: 123-456-7890
RunApp::Control::ApacheCtl(3)
Class for invoking apachectl
SPOPS::Export::DBI::Data(3)
Export SPOPS objects as data for importing directly into a DBI table
Test2::Formatter::Stream(3)
Test2 Formatter that directly writes events
Test2::Harness::Util::File::Value(3)
Utility class for a file that contains exactly 1 value
Test::Compile(3)
Check whether Perl files compile correctly
Test::Parser::Sysctl(3)
Perl module to parse output from sysctl
Text::Quote(3)
Quotes strings as required for perl to eval them back correctly
Version::Next(3)
increment module version numbers simply and correctly
arced(nged)
Provides a means for directly editing transformation matrices of Boolean tree leaves
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
ctl_backups(8)
Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1
ctl_conversationsdb(8)
Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1
ctl_cyrusdb(8)
Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1
ctl_deliver(8)
Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1
ctl_mboxlist(8)
Cyrus IMAP documentation rst2man-indent-level 0 1 rstReportMargin \$1
fish-completions(1)
Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
keyboard(3), initkeyboard(3), ctlkeyboard(3), closekeyboard(3)
keyboard control
mach-file(3), crackhdr(3), uncrackhdr(3), mapfile(3), unmapfile(3), mapproc(3), unmapproc(3), detachproc(3), ctlproc(3), procnotes(3)
machine-independent access to exectuable files and running processes
mdnsctl(8)
control the Multicast Domain Server daemon
mogstats(1)
-- Utility for calculating slow stats directly against a MogileFS DB
oed(nged)
Places MGED directly into the matrix edit mode
ompi-ps(1), orte-ps(1)
Displays information about the active jobs and processes in Open MPI. NOTE: ompi-ps, and orte-ps are exact synonyms for each other. Using any of the names will result in exactly identical behavior
ompi-top(1), orte-top(1)
Diagnostic to provide process info similar to the popular "top" program. NOTE: ompi-top, and orte-top are exact synonyms for each other. Using any of the names will result in exactly identical behavior
openxpkictl(1)
start/stop script for OpenXPKI server
riverctl(1)
command-line interface for controlling river
rmtopen(3), rmtclose(3), rmtread(3), rmtwrite(3), rmtseek(3), rmtioctl(3)
operate on a connection to a remote tape server
sed(nged)
Places MGED directly into the primitive edit mode
sioctl_open(3), sioctl_close(3), sioctl_ondesc(3), sioctl_onval(3), sioctl_setval(3), sioctl_nfds(3), sioctl_pollfd(3), sioctl_eof(3)
interface to audio parameters
sndioctl(1)
manipulate audio device controls
sysctlview(1)
sysctl MIB explorer
tickit_ctlname(3)
return the name of a toplevel instance control
tickit_getctl_int(3), tickit_setctl_int-(3)
set an integer toplevel instance control
tickit_term_ctlname(3)
return the name of a terminal control
tickit_term_setctl_int(3), tickit_term_setctl_str(3)
set an integer or string terminal control
tickit_window_ctlname(3)
return the name of a window control
tickit_window_getctl_int(3), tickit_window_setctl_int-(3)
set an integer window control
tv_validate_grabber(1)
Validate that an xmltv grabber works correctly
wctl(3), drawresizewindow(3), drawsetlabel(3), drawtopwindow(3)
window management
home | help