FreeBSD Manual Pages

home | help

BUS_CONFIG_INTR(9): configure interrupt polarity and trigger mode
acpi(4): Advanced Configuration and Power Management support
adduser.conf(5): adduser(8) configuration file
amd.conf(5): amd(8) configuration file
ancontrol(8): configure Aironet 4500/4800 devices
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3): C API to write ATF-based test programs
atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_init_test_cases(3), atf_pass(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3): POSIX shell API to write ATF-based test programs
auditctl(2): configure system audit parameters
auditdistd.conf(5): configuration file for the auditdistd(8) daemon
auditon(2): configure system audit parameters
blacklistd.conf(5): configuration file format for blacklistd
bluetooth-config(8): a script to manage config files for the bluetooth sub system
bluetooth.device.conf(5): Bluetooth device configuration file
boot.config(5): Configuration file for the boot blocks
boot0cfg(8): boot manager installation/configuration utility
bsdconfig(8): system configuration utility
ccdconfig(8): configuration utility for the concatenated disk driver
config(5): kernel configuration file format
config(8): build system configuration files
config.lua(8): FreeBSD config module
config_intrhook(9): schedule a function to be run after interrupts have been enabled, but before root is mounted
confstr(3): get string-valued configurable variables
cpuset(1): configure processor sets
ctl.conf(5): CAM Target Layer / iSCSI target daemon configuration file
dcons_crom(4): Configuration ROM stub for dcons(4)
ddb(8): configure DDB kernel debugger properties
devd.conf(5): configuration file for devd(8)
devfs.conf(5): boot-time devfs configuration information
devfs.rules(5): devfs configuration information
devinfo(8): print information about system device configuration
dhclient(8): Dynamic Host Configuration Protocol (DHCP) client
dhclient-script(8): DHCP client network configuration script
dhclient.conf(5): DHCP client configuration file
dhcp-options(5): Dynamic Host Configuration Protocol options
dwarf_seterrarg(3), dwarf_seterrhand(3): configure error handling
editrc(5): configuration file for editline library
etherswitchcfg(8): configure a built-in Ethernet switch
figpar(3), parse_config(3), get_config_option(3): configuration file parsing library
finger.conf(5): finger(1) alias configuration file
freebsd-update.conf(5): configuration file for freebsd-update(8)
getconf(1): retrieve standard configuration variables
getnetconfig(3), setnetconfig(3), endnetconfig(3), getnetconfigent(3), freenetconfigent(3), nc_perror(3), nc_sperror(3): get network configuration database entry
getnetpath(3), setnetpath(3), endnetpath(3): get /etc/netconfig entry corresponding to NETPATH component
gettytab(5): terminal configuration data base
hast.conf(5): configuration file for the hastd(8) daemon and the hastctl(8) utility
hccontrol(8): Bluetooth HCI configuration utility
hcsecd.conf(5): hcsecd(8) configuration file
hostapd.conf(5): configuration file for hostapd(8) utility
ifconfig(8): configure network interface parameters
iflibdd(9): Device Dependent Configuration Functions
iflibdi(9): Device Independent Configuration Functions
iovctl(8): PCI SR-IOV configuration utility
iovctl.conf(5): IOVCTL configuration file
ip6addrctl(8): configure address selection policy for IPv6 and IPv4
ipmon(5), ipmon.conf(5): ipmon configuration file format
iscsi.conf(5): iSCSI initiator configuration file
jail.conf(5): configuration file for jail(8)
kbdcontrol(1): keyboard control and configuration utility
kldconfig(8): display or modify the kernel module search path
krb5-config(1): give information on how to link code against Heimdal libraries
krb5.conf(5): configuration file for Kerberos 5
krb5_add_et_list(3), krb5_add_extra_addresses(3), krb5_add_ignore_addresses(3), krb5_context(3), krb5_free_config_files(3), krb5_free_context(3), krb5_get_default_config_files(3), krb5_get_dns_canonize_hostname(3), krb5_get_extra_addresses(3), krb5_get_fcache_version(3), krb5_get_ignore_addresses(3), krb5_get_kdc_sec_offset(3), krb5_get_max_time_skew(3), krb5_get_use_admin_kdc krb5_init_context(3), krb5_init_ets(3), krb5_prepend_config_files(3), krb5_prepend_config_files_default(3), krb5_set_config_files(3), krb5_set_dns_canonize_hostname(3), krb5_set_extra_addresses(3), krb5_set_fcache_version(3), krb5_set_ignore_addresses(3), krb5_set_max_time_skew(3), krb5_set_use_admin_kdc(3): create, modify and delete krb5_context structures
krb5_appdefault_boolean(3), krb5_appdefault_string(3), krb5_appdefault_time(3): get application configuration value
l2control(8): L2CAP configuration utility
ldconfig(8): configure the shared library cache
lib80211(3), lib80211_alloc_regdata(3), lib80211_free_regdata(3), lib80211_regdomain_readconfig(3), lib80211_regdomain_cleanup(3), lib80211_regdomain_findbysku(3), lib80211_regdomain_findbyname(3), lib80211_country_findbycc(3), lib80211_country_findbyname(3): manage net80211 configuration and regulatory database
libmap.conf(5): configuration file for dynamic object dependency mapping
libucl(3), ucl_parser_new(3), ucl_parser_register_macro(3), ucl_parser_register_variable(3), ucl_parser_add_chunk(3), ucl_parser_add_string(3), ucl_parser_add_file(3), ucl_parser_get_object(3), ucl_parser_get_error(3), ucl_parser_free(3), ucl_pubkey_add(3), ucl_parser_set_filevars(3): universal configuration library parser and utility functions
loader.conf(5): system bootstrap configuration information
local-unbound-checkconf(8): Check local-unbound configuration file for errors
local-unbound.conf(5), unbound.conf(5): Local-unbound configuration file
mac.conf(5): format of the MAC library configuration file
mailer.conf(5): configuration file for mailwrapper(8)
mailwrapper(8): invoke appropriate MTA software based on configuration file
man.conf(5): man(1) and manpath(1) configuration files
mdconfig(8): create and control memory disks
mdmfs(8), mount_mfs(8): configure and mount an in-memory file system using the md(4) driver or the tmpfs(5) filesystem
mergemaster(8): merge configuration files, et al during an upgrade
mount.conf(5): root file system mount configuration file
mptable(1): display MP configuration table
netconfig(5): network configuration data base
newsyslog.conf(5): newsyslog(8) configuration file
nscd.conf(5): nscd configuration file
nsmb.conf(5): configuration file for SMB requests
nsswitch.conf(5): name-service switch configuration file
ntp.conf(5): Network Time Protocol (NTP) daemon configuration file format
pathconf(2), lpathconf(2), fpathconf(2): get configurable pathname variables
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9): PCI bus interface
pci_iov_schema(9), pci_iov_schema_alloc_node(9), pci_iov_schema_add_bool(9), pci_iov_schema_add_string(9), pci_iov_schema_add_uint8(9), pci_iov_schema_add_uint16(9), pci_iov_schema_add_uint32(9), pci_iov_schema_add_uint64(9), pci_iov_schema_add_unicast_mac(9): PCI SR-IOV config schema interface
periodic.conf(5): periodic job configuration information
pf.conf(5): packet filter configuration file
pmc_configure_logfile(3), pmc_flush_logfile(3), pmc_writelog(3), pmc_close_logfile(3): log file management
portsnap.conf(5): configuration file for portsnap(8)
pw.conf(5): format of the pw.conf configuration file
pwm(8): configure PWM (Pulse Width Modulation) hardware
pwmbus(9), PWMBUS_CHANNEL_CONFIG(9), PWMBUS_CHANNEL_COUNT(9), PWMBUS_CHANNEL_ENABLE(9), PWMBUS_CHANNEL_GET_CONFIG(9), PWMBUS_CHANNEL_GET_FLAGS(9), PWMBUS_CHANNEL_IS_ENABLED(9), PWMBUS_CHANNEL_SET_FLAGS(9), PWMBUS_GET_BUS(9): PWMBUS methods
radius.conf(5): RADIUS client configuration file
rc.conf(5): system configuration information
resolvconf(8): a framework for managing multiple DNS configurations
resolvconf.conf(5): resolvconf configuration file
resolver(5): resolver configuration file
rrenumd.conf(5): configuration file for router renumbering daemon
rtadvd.conf(5): config file for router advertisement daemon
ssh_config(5): OpenSSH SSH client configuration files
sshd_config(5): OpenSSH SSH daemon configuration file
sysconf(3): get configurable system variables
syslog.conf(5): syslogd(8) configuration file
tacplus.conf(5): TACACS+ client configuration file
tcpdchk(8): tcp wrapper configuration checker
usbconfig(8): configure the USB subsystem
vfsconf(9): vfs configuration information
vidcontrol(1): system console control and configuration utility
wpa_supplicant.conf(5): configuration file for wpa_supplicant(8)
ypldap.conf(5): LDAP YP map daemon configuration file
zfs(8): configures ZFS file systems
zpool(8): configures ZFS storage pools
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3): OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3): OpenSSL configuration functions
OPENSSL_INIT_new(3), OPENSSL_INIT_set_config_filename(3), OPENSSL_INIT_set_config_appname(3), OPENSSL_INIT_set_config_file_flags(3), OPENSSL_INIT_free(3), OPENSSL_init_crypto(3), OPENSSL_cleanup(3), OPENSSL_atexit(3), OPENSSL_thread_stop(3): OpenSSL initialisation and deinitialisation functions
OPENSSL_config(3), OPENSSL_no_config(3): simple OpenSSL configuration functions
OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3): add standard configuration modules
SSL_CONF_CTX_new(3), SSL_CONF_CTX_free(3): SSL configuration allocation functions
SSL_CONF_CTX_set1_prefix(3): Set configuration context command prefix
SSL_CONF_CTX_set_flags(3), SSL_CONF_CTX_clear_flags(3): Set or clear SSL configuration context flags
SSL_CONF_CTX_set_ssl_ctx(3), SSL_CONF_CTX_set_ssl(3): set context to configure
SSL_CONF_cmd_argv(3): SSL configuration command line processing
SSL_CONF_cmd_value_type(3), SSL_CONF_cmd(3): send configuration command
SSL_CTX_config(3), SSL_config(3): configure SSL_CTX or SSL structure
SSL_CTX_set_tlsext_use_srtp(3), SSL_set_tlsext_use_srtp(3), SSL_get_srtp_profiles(3), SSL_get_selected_srtp_profile(3): Configure and query SRTP support
/cowthink(1): configurable speaking/thinking cow (and a bit more)
3proxy.cfg(3): 3proxy configuration file
ALLEGRO_CONFIG(3): Allegro 5 API
ALTER_SYSTEM(7): change a server configuration parameter
ALTER_TEXT_SEARCH_CONFIGURATION(7): change the definition of a text search configuration
AnimateTypes(1x): animation modes used in the Animate module's config
AppleVolumes.default(5), AppleVolumes.system(5), AppleVolumes(5): Configuration file used by afpd(8) to determine the shares made available through AFP and specify file name extension mappings
BUS_CONFIG_INTR(9): configure interrupt polarity and trigger mode
Base(1x): essential AfterStep configuration options
BosConfig(5): Defines server processes for the BOS Server to monitor
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3): OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3): OpenSSL configuration functions
CREATE_TEXT_SEARCH_CONFIGURATION(7): define a new text search configuration
ColorScheme(1x): defines color values for standard set of internal color names, to be used in other configuration files
Configuration(3): reads the configuration file and manages it in memory
ControlPanel-17(1), ControlPanel(1): Configure desktop settings for FOX Toolkit applications
DROP_TEXT_SEARCH_CONFIGURATION(7): remove a text search configuration
Dpkg::Conf(3): parse dpkg configuration files
EZ_Configure3DCanvas(3), EZ_GLConfig(3): update the graphics state of a 3D canvas
EZ_ConfigureItem(3): configure a display item
EZ_ConfigureWidget(3): configure an existing widget
FcConfigAppFontAddDir(3): Add fonts from directory to font database
FcConfigAppFontAddFile(3): Add font file to font database
FcConfigAppFontClear(3): Remove all app fonts from font database
FcConfigBuildFonts(3): Build font database
FcConfigCreate(3): Create a configuration
FcConfigDestroy(3): Destroy a configuration
FcConfigEnableHome(3): controls use of the home directory
FcConfigFilename(3): Find a config file
FcConfigGetBlanks(3): Get config blanks
FcConfigGetCache(3): DEPRECATED used to return per-user cache filename
FcConfigGetCacheDirs(3): return the list of directories searched for cache files
FcConfigGetConfigDirs(3): Get config directories
FcConfigGetConfigFiles(3): Get config files
FcConfigGetCurrent(3): Return current configuration
FcConfigGetFontDirs(3): Get font directories
FcConfigGetFonts(3): Get config font set
FcConfigGetRescanInterval(3): Get config rescan interval
FcConfigGetSysRoot(3): Obtain the system root directory
FcConfigHome(3): return the current home directory
FcConfigParseAndLoad(3): load a configuration file
FcConfigReference(3): Increment config reference count
FcConfigSetCurrent(3): Set configuration as default
FcConfigSetRescanInterval(3): Set config rescan interval
FcConfigSetSysRoot(3): Set the system root directory
FcConfigSubstitute(3): Execute substitutions
FcConfigSubstituteWithPat(3): Execute substitutions
FcConfigUptoDate(3): Check timestamps on config files
FcFini(3): finalize fontconfig library
FcInit(3): initialize fontconfig library
FcInitBringUptoDate(3): reload configuration files if needed
FcInitLoadConfig(3): load configuration
FcInitLoadConfigAndFonts(3): load configuration and font data
FcWeightFromOpenType(3): Convert from OpenType weight values to fontconfig ones
FcWeightToOpenType(3): Convert from fontconfig weight values to OpenType ones
Feel(1x): AfterStep feel configuration
FeelWindowBox(1x): defines placement policy for certain type of windows, based on desk, window attributes, window size, etc. Useful for xinerama configurations, where windows should not be placed in between screens
FvwmWindowMenu(1): open configurable fvwm menu listing current windows
GeoIP.conf(5): Configuration file for geoipupdate
GraphicsMagick++-config(1): get information about the installed version of Magick++
GraphicsMagick-config(1): get information about the installed version of GraphicsMagick
GraphicsMagickWand-config(1): get information about the installed version of GraphicsMagick
INN::Config(3pm): Export all the variables an INN Perl script might need
MP4AddRtpESConfigurationPacket(3): Add ES configuration information to an RTP hint
MP4GetTrackESConfiguration(3): Get the elementary stream (ES) configuration of a track
MP4SetTrackESConfiguration(3): Set the elementary stream (ES) configuration of a track
Magick++-config(1): get information about the installed version of Magick++
Magick-config(1): get information about the installed version of ImageMagick
MagickCore-config(1): get information about the installed version of ImageMagick
MagickWand-config(1): get information about the installed version of the Magick Wand
Munin::Common::Config(3): Abstract base class for common config code
Munin::Master::Config(3): Holds the master configuration
Munin::Node::Config(3): Singleton node configuration container. Reads configuration files
Munin::Node::Configure::Debug(3): Prints a debug message in the standard munin-node-configure format
Munin::Node::Configure::History(3): Filtering plugins based on the version of Munin they were first distributed with
Munin::Node::Configure::HostEnumeration(3): Takes a list of hosts, and returns the corresponding IPs in dotted-quad form
Munin::Node::Configure::Plugin(3): Class representing a plugin, along with its installed and suggested services
Munin::Node::Configure::PluginList(3): Loading and listing a collection of plugins
Munin::Node::SNMPConfig(3): Subroutines providing munin-node-configure's SNMP scanning capabilities
OPENSSL_config(3), OPENSSL_no_config(3): simple OpenSSL configuration functions
OPENSSL_init_new(3), OPENSSL_INIT_set_config_appname(3), OPENSSL_INIT_free(3), OPENSSL_init_crypto(3), OPENSSL_cleanup(3), OPENSSL_atexit(3), OPENSSL_thread_stop(3): OpenSSL initialisation and deinitialisation functions
OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3): add standard configuration modules
PolicyKit.conf(5): PolicyKit configuration file
SLONIK_DROP_LISTEN(7), DROP LISTEN(7): Eliminate configuration indicating how Slony-I node listens for events
SLONIK_REPAIR_CONFIG(7), REPAIR CONFIG(7): Resets the name-to-oid mapping of tables in a replication set, useful for restoring a node after a pg_dump
SLONIK_STORE_LISTEN(7), STORE LISTEN(7): Configure Slony-I node to indicate where to listen for events
SLONIK_STORE_PATH(7), STORE PATH(7): Configure Slony-I node connection
SSL_CONF_CTX_new(3), SSL_CONF_CTX_free(3): SSL configuration allocation functions
SSL_CONF_CTX_set1_prefix(3): Set configuration context command prefix
SSL_CONF_CTX_set_flags(3), SSL_CONF_CTX_clear_flags(3): Set of clear SSL configuration context flags
SSL_CONF_CTX_set_ssl_ctx(3), SSL_CONF_CTX_set_ssl(3): set context to configure
SSL_CONF_cmd_argv(3): SSL configuration command line processing
SSL_CONF_cmd_value_type(3), SSL_CONF_finish(3), SSL_CONF_cmd(3): send configuration command
SSL_CTX_config(3), SSL_config(3): configure SSL_CTX or SSL structure
SWISH-CONFIG(1): Configuration File Directives
Sympa::ConfDef(3Sympa): Definition of site and robot configuration parameters
Sympa::ListDef(3Sympa): Definition of list configuration parameters
Sympa::ListOpt(3Sympa): Definition of list configuration parameter values
TIFFFindCODEC(3tiff), TIFFRegisterCODEC(3tiff), TIFFUnRegisterCODEC(3tiff), TIFFIsCODECConfigured(3tiff): codec-related utility routines
Tspi_Data_Unseal(3): dencrypt data encrypted by Tspi_Data_Seal() only if it was encrypted on the same platform and under the current configuration
WPrefs(1): Window Maker configuration tool
Wand-config(1): get information about the installed version of the Magick Wand
WordContext(3): read configuration and setup mifluz context
X509_STORE_load_locations(3), X509_STORE_set_default_paths(3): configure files and directories used by a certificate store
XConfigureEvent(3): ConfigureNotify event structure
XConfigureRequestEvent(3): ConfigureRequest event structure
XConfigureWindow(3), XMoveWindow(3), XResizeWindow(3), XMoveResizeWindow(3), XSetWindowBorderWidth(3), XWindowChanges(3): configure windows and window changes structure
XIconifyWindow(3), XWithdrawWindow(3), XReconfigureWMWindow(3): manipulate top-level windows
XSupportsLocale(3), XSetLocaleModifiers(3): determine locale support and configure locale modifiers
XkbSetAccessXTimeout(3): Configures the AccessXTimeout options for a keyboard device
XmDropSiteConfigureStackingOrder(3): A Drag and Drop function that reorders a stack of widgets that are registered drop sites "XmDropSiteConfigureStack\%ingOrder" "Drag and Drop functions" "XmDropSiteConfigureStack\%ingOrder"
XtConfigureWidget(3), XtMoveWidget(3), XtResizeWidget(3): move and resize widgets
abookrc(5), $HOME/.abook/abookrc(5): configuration file for abook address book program
account-server.conf(5): configuration file for the openstack-swift account server
acct_gather.conf(5): Slurm configuration file for the acct_gather plugins
acpi(4): Advanced Configuration and Power Management support
adacurses-config(1): helper script for AdaCurses libraries
adduser.conf(5): adduser(8) configuration file
aepconf(5): aegis project configuration file
aeuconf(5): user configuration file
afp.conf(5): Netatalk configuration file
afp_ldap.conf(5): Configuration file used by afpd(8) to configure a LDAP connection to an LDAP server. That is needed for ACL support in order to be able to query LDAP for UUIDs
afp_signature.conf(5): Configuration file used by afpd(8) to specify server signature
afp_voluuid.conf(5): Configuration file used by afpd(8) to specify UUID for Time Machine volume
afpd.conf(5): Configuration file used by afpd(8) to determine the setup of its file sharing services
aide.conf(5): The configuration file for Advanced Intrusion Detection Environment
al_add_config_comment(3): Allegro 5 API
al_add_config_section(3): Allegro 5 API
al_create_config(3): Allegro 5 API
al_destroy_config(3): Allegro 5 API
al_get_config_value(3): Allegro 5 API
al_get_first_config_entry(3): Allegro 5 API
al_get_first_config_section(3): Allegro 5 API
al_get_next_config_entry(3): Allegro 5 API
al_get_next_config_section(3): Allegro 5 API
al_get_system_config(3): Allegro 5 API
al_load_config_file(3): Allegro 5 API
al_load_config_file_f(3): Allegro 5 API
al_merge_config(3): Allegro 5 API
al_merge_config_into(3): Allegro 5 API
al_reconfigure_joysticks(3): Allegro 5 API
al_save_config_file(3): Allegro 5 API
al_save_config_file_f(3): Allegro 5 API
al_set_config_value(3): Allegro 5 API
alerts.cfg(5): Configuration for for xymond_alert module
alsaconf(8): configuration tool for the Advanced Linux Sound Architecture
amaddclient(8): program to add client to an existing Amanda configuration
amanda-changers(7): Configuring and Using Amanda Changers
amanda-client.conf(5): Client configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
amanda-devices(7): Configuring and Using Amanda Devices
amanda-interactivity(7): Configuring Interactivity with Amanda Amanda
amanda-scripts(7): Configuring and using the Script API
amanda-security.conf(5): Client configuration file for Amanda
amanda.conf(5): Main configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
amd.conf(5): amd(8) configuration file
amdump(8): back up all disks in an Amanda configuration
amdump_client(8): back up all disks in an Amanda configuration
amgetconf(8): look up configuration parameters and manipulate debug logs
ample.conf(5): configuration file for Ample
amserverconfig(8): program to setup initial Amanda configuration
anacrontab(5), /usr/local/etc/anacrontab(5): configuration file for anacron
analysis.cfg(5): Configuration file for the xymond_client module
ancontrol(8): configure Aironet 4500/4800 devices
and.conf(5), /etc/and.conf(5): general configuration parameters for the auto nice daemon
aoxsuper.conf(5): configuration file for Archiveopteryx
ap-config(8): configure and monitor Atmel and NWN based APs
apcupsd.conf(5): apcupsd(8) configuration file
app_config(3): application configuration system
apsfilterrc(5): configuration file for magic print filter
archiveopteryx.conf(5): configuration file for Archiveopteryx
ares_save_options(3): Save configuration values obtained from initialized ares_channel
ares_set_servers(3), ares_set_servers_ports(3): Initialize an ares_channel name servers configuration
ares_set_socket_configure_callback(3): Set a socket configuration callback
ares_set_sortlist(3): Initialize an ares_channel sortlist configuration
argconfig(3bobcat), FBB::ArgConfig(3bobcat): A singleton class processing program arguments
asmtpd.conf(5): Avenger SMTP Daemon configuration file
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3): C API to write ATF-based test programs
atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_init_test_cases(3), atf_pass(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3): POSIX shell API to write ATF-based test programs
atmconfig(8): ATM configuration tool
atpdiag(1): checks atp qwk reader configuration
auditctl(2): configure system audit parameters
auditdistd.conf(5): configuration file for the auditdistd(8) daemon
auditon(2): configure system audit parameters
augtool(1): inspect and modify configuration files
autoconf-2.69(1), autoconf(1): Generate configuration scripts
autoheader-2.69(1), autoheader(1): Create a template header for configure
automounter(8): Dynamically configure amd for existing devices
automx.conf(5): automx configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
automx_ldap(5): automx LDAP backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
automx_script(5): automx script backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
automx_sql(5): automx SQL backend configuration parameters rst2man-indent-level 0 1 rstReportMargin \$1
autoopts-config(1): script to get information about installed version of autoopts
autoreconf-2.69(1), autoreconf(1): Update generated configuration files
autoscan-2.69(1), autoscan(1): Generate a preliminary configure.in
autoupdate-2.69(1), autoupdate(1): Update a configure.in to a newer Autoconf
avahi-autoipd(8): IPv4LL network address configuration daemon
avahi-daemon.conf(5): avahi-daemon configuration file
avahi-dnsconfd(8): Unicast DNS server from mDNS/DNS-SD configuration daemon
awesome2rc(5): Configuration file for the awesome2 window manager
awesomerc(5): Configuration file for the awesome window manager
bbackupd-config(8): Box Backup client daemon configuration file generator
bbackupd.conf(5): Box Backup client daemon configuration file
bbkeysrc(5): bbkeys configuration file
bbstored-config(8): Box Backup store daemon configuration file generator
bbstored.conf(5): Box Backup store daemon configuration file
bcfg2-lint.conf(5): Configuration parameters for bcfg2-lint rst2man-indent-level 0 1 rstReportMargin \$1
bcfg2-server(8): Server for client configuration specifications rst2man-indent-level 0 1 rstReportMargin \$1
bcfg2.conf(5): Configuration parameters for Bcfg2 rst2man-indent-level 0 1 rstReportMargin \$1
beetsconfig(5): beets configuration file rst2man-indent-level 0 1 rstReportMargin \$1

bft-config(1): Script to get information about the installed version of the BFT library
bgpd.conf(5): Border Gateway Protocol daemon configuration file
bincimap.conf(5): Global configuration file for Binc IMAP
bip.conf(5): Configuration file for BIP IRC Proxy
bitlbee.conf(5): configuration file for bitlbee (8)
blacklistd.conf(5): configuration file format for blacklistd
bluegene.conf(5): Slurm configuration file for BlueGene systems
bluetooth.device.conf(5): Bluetooth device configuration file
bnetd.conf(5): configuration for the Unix Battle.net daemon
bochsrc(5): Configuration file for Bochs
boom.cfg(5), glboom.cfg(5): Configuration file for PrBoom v2.1.0 onwards
boot.config(5): Configuration file for the boot blocks
boot0cfg(8): boot manager installation/configuration utility
bos_create(8): Defines a new process in the BosConfig file and starts it
bos_delete(8): Deletes a server process from the BosConfig file
bosco_cluster(1): Manage and configure the clusters to be accessed
bpython-config(5): user configuration file for bpython rst2man-indent-level 0 1 rstReportMargin \$1
bsdconfig(8): system configuration utility
bsmtrace.conf(5): configuration file for bsmtrace
bsnmp-regex.conf(5): the configuration file for the bsnmp-regex(8) module
buffindexed.conf(5): Configuration for the buffindexed overview method
bugle-log(7): configure logging output from other filter-sets
build.xml(5): configuration file used by ant to build projects
burst_buffer.conf(5): Slurm configuration file for burst buffer management
byobu(1): wrapper script for seeding a user's byobu configuration and launching a text based window manager (either screen or tmux)
byobu-config(1): Configuration utility for byobu
byobu-ctrl-a(1): Configure Byobu's ctrl-a behavior
byobu-prompt(1), byobu-enable-prompt(1), byobu-disable-prompt(1): add and remove a nice color prompt to your shell configuration
c-icap-config(8): script to get information about c-icap server
c-icap-libicapapi-config(8): script to get information about c-icap library
caca-config(1): script to get information about the installed version of libcaca
cacheinfo(5): Defines configuration parameters for the Cache Manager
calendarserver_config(8): Calendar Server Configuration Utility
castgetrc(5): configuration file for castget
cb_share_config(1): Import/export parts of Code::Blocks configuration
cbcrc(4): Configuration file for Couchbase command line tools
ccdconfig(8): configuration utility for the concatenated disk driver
cdeploy(1): deploy a set of configuration files to a target file system
ceylon-config(1), ceylon config(1): Manages Ceylon configuration files
cfagent(8): system configuration agent
cfengine(8): network configuration engine
cfg(3), OSSP cfg(3): Configuration Parsing
cfg(3m): persistent configuration properties interface
cfg-clex(1): CLEX configuration utility
cfgread(3), cfgget(3), cfgget2(3): functions to read and parse configuration files
cgroup.conf(5): Slurm configuration file for the cgroup support
charmrc(5): Configuration file for Charm
charset.conf(5): Configiration file for legacy character set support by Sympa


cherokee-config(1): script to get information about the installed version of Cherokee
chilli.conf(5): Chilli Configuration
chilli_radconfig(1): Utility function to fetch configurations over RADIUS
chocolate-doom.cfg(5): Chocolate Doom configuration file
chocolate-setup(6): configuration tool for chocolate-doom
chrony.conf(5): chronyd configuration file
cinnamon-session-properties(1): Configure applications to start on login
cinnamon-settings(1): Configuration panel for cinnamon
cjdroute.conf(5): Cjdns configuration file
clamav-milter.conf(5): Configuration file for clamav-milter
clamconf(1): Clam AntiVirus configuration utility
clamd.conf(5): Configuration file for Clam AntiVirus Daemon
clamsmtpd.conf(5): the configuration file for clamsmtpd(8)
classes.conf(5): class configuration file for cups
client-local.cfg(5): Local configuration settings for Xymon clients
client.conf(5): client configuration file for cups
clients.conf(5): FreeRADIUS client configuration
climmrc(5), ~/.climm/climmrc(5): The configuration file for climm
cloginrc(5), .cloginrc(5): clogin configuration file
cmap_keys(8): Overview of keys stored in the Configuration Map
cmap_overview(8): Overview of the Configuration Map
coin-config(1): Display Coin Library Configuration
collectd.conf(5): Configuration for the system statistics collection daemon collectd
combo.cfg(5): Configuration of combostatus tool
commoncpp-config(1): script to get information about common c++ library
comprex-config(1): Get information about a libcomprex installation
condor_config_val(1): Query or set a given HTCondor configuration variable
condor_configure(1): Configure or install HTCondor
condor_install(1): Configure or install HTCondor
condor_reconfig(1): Reconfigure HTCondor daemons
condor_urlfetch(1): fetch configuration given a URL
confaudit(8): configuration auditor
confctl(1): sysctl-like tool for config files
confexport(8): configuration exporter
confget(1): read a variable from a configuration file
config(5): kernel configuration file format
config(8): build system configuration files
config.guess-2.69(1): guess the build system triplet
config.lua(8): FreeBSD config module
config.sub-2.69(1): validate and canonicalize a configuration triplet
configFileLoad(3): parse a configuration file
config_intrhook(9): schedule a function to be run after interrupts have been enabled, but before root is mounted
config_is_hooked(3): Tells if a config section has custom hooks. Allegro game programming library
configbody(i4), itcl::configbody(i4): change the "config" code for a public variable
configbody(itcl): change the "config" code for a public variable
configctl(1): Generic tool to parse and update configuration files
configfile(3bobcat), FBB::ConfigFile(3bobcat): A class processing standard unix-like configuration files
configure(3), nx::configure(3): Get and set configuration options on the object system
confman(8): configuration file manager
confman.conf(5): confman configuration file
confreport.cgi(1): Xymon Configuration report
confstr(3): get string-valued configurable variables
confsync(8): configuration syncer
conserver.cf(5): console configuration file for conserver (8)
container-server.conf(5): configuration file for the openstack-swift container server
corosync.conf(5): corosync executive configuration file
cppunit-config(1): script to get information about the installed version of cppunit
cpu.conf(5): cpu configuration file
cpuset(1): configure processor sets
cray.conf(5): Slurm configuration file for the Cray-specific information
credns-checkconf(8): Credns configuration file checker
credns.conf(5): Credns configuration file
critical.cfg(5): Configuration of the showgraph CGI
crm(8): Pacemaker command line interface for configuration and management
cs_preprocess-config(1), ecs-config(1): Script to get information about the installed version of the Code_Saturne preprocessor
csocks.conf(5): Configuration file for csocks library
ctl.conf(5): CAM Target Layer / iSCSI target daemon configuration file
ctpp2-config(1): CTPP configuration tool
ctrlproxy_config(5): Configuration file for ctrlproxy
cups-browsed.conf(5): server configuration file for cups-browsed
cups-config(1): get cups api, compiler, directory, and link information
cups-files.conf(5): file and directory configuration file for cups
cupsctl(8): configure cupsd.conf options
cupsd.conf(5): server configuration file for cups
curl-config(1): Get information about a libcurl installation
cvsd-buginfo(8): print out cvsd configuration information for bug reports
cvsd.conf(5): configuration file for cvsd
cvsgraph.conf(5): CVS/RCS repository grapher configuration
cvswrap.conf(5): configuration file for cvswrap
cwmrc(5): calm window manager configuration file
cycbuff.conf(5): Configuration file for INN CNFS storage method

dahdi_cfg(8): configures DAHDI kernel modules from /usr/local/etc/dahdi/system.conf
dahdi_scan(8): Print Configuration of DAHDI Spans
darkice.cfg(5): configuration file for darkice
darktable-cmstest(1): test if the color management subsystem of your computer is correctly configured
dbconfig(5): GNATS database configuration file
dbmail.conf(5): configuration file for DBMail, the Database Mailer
dconf(7): A configuration systen
dcons_crom(4): Configuration ROM stub for dcons(4)
ddb(8): configure DDB kernel debugger properties
default.cfg(5): Chocolate Doom configuration file
define(n), oo::define(n), oo::objdefine(n): define and configure classes and objects
detoxrc(5): configuration file for detox(1)
devd.conf(5): configuration file for devd(8)
devfs.conf(5): boot-time devfs configuration information
devfs.rules(5): devfs configuration information
devinfo(8): print information about system device configuration
dfbg(1): DirectFB background configuration tool
dhclient(8): Dynamic Host Configuration Protocol (DHCP) client
dhclient-script(8): DHCP client network configuration script
dhclient.conf(5): DHCP client configuration file
dhcp-options(5): Dynamic Host Configuration Protocol options
dhcp6c.conf(5): DHCPv6 client configuration file
dhcp6s.conf(5): DHCPv6 server configuration file
dhcp_probe.cf(5): configuration file for dhcp_probe
dhcpcd-run-hooks(8): DHCP client configuration script
dhcpcd.conf(5): dhcpcd configuration file
dhcpd(8): Dynamic Host Configuration Protocol Server
dhcpd.conf(5): dhcpd configuration file
dhcrelay(8): Dynamic Host Configuration Protocol Relay Agent
dhexrc(5): Configuration File for dhex
diablo-files(5): Synopsis of configuration and control files for Diablo
directfbrc(5): DirectFB configuration file
dirvish.conf(5): dirvish configuration file
dispersion.conf(5): configuration file for the openstack-swift dispersion tools
displays(5): Display Configuration File
dmxtodmx(1): dmx configuration file parser and printer
doas.conf(5): doas configuration file
doinkd.cf(5), /usr/local/etc/doinkd/doinkd.cf(5): doinkd configuration file format
doormand.cf(5): The doormand configuration file
doveconf(1): Dovecot(aqs configuration dumping utility
dovecot(1): a secure and highly configurable IMAP and POP3 server
doxywizard(1): a tool to configure and run doxygen on your source files
dphys-config(1): daily auto-install/update and/or remove config files
dpkg.cfg(5): dpkg configuration file
drmModeGetResources(3): retrieve current display configuration information
drool.conf(5): Configuration for DNS Replay Tool
dselect.cfg(5): dselect configuration file
dtcpc(8): Dynamic Tunnel Configuration Protocol client
dtcpclient(8): Dynamic Tunnel Configuration Protocol client
dtcps(8): Dynamic Tunnel Configuration Protocol daemon
dumpfcfg(1): dump fidoconfig to file or stdout
dwarf_seterrarg(3), dwarf_seterrhand(3): configure error handling
e2fsck.conf(5): Configuration file for e2fsck
eboard-config(1): program to get information about the installed eboard
ecl-config(1): Embeddable Common Lisp configuration query
editkernel(1): Commandline program for editing a kernel configuration file
editrc(5): configuration file for editline library
elinks.conf(5): ELinks configuration file
elmoconf.pl(1): Configuration tool for Elmo
email2ncid.conf(5): email2ncid configuration file
emil.cf(1): configuration file for emil(1)
empathy-accounts(1): Accounts configuration dialog for Empathy instant messaging client
esd-config(1): The Enlightened Sound Daemon
esmtprc(5): esmtp configuration file
estconfig(1): configuration utility of Hyper Estraier
etherswitchcfg(8): configure a built-in Ethernet switch
etter.conf(5): Ettercap configuration file
exconfig(3): Using the configuration routines. Allegro game programming library
expire.ctl(5): Configuration file for article expiration
explain_fpathconf_or_die(3): get file configuration and report errors require_index { "get configuration values for files and report errors" }
explain_pathconf_or_die(3): get configuration values and report errors require_index { "get configuration values for files and report errors" }
ext_sensors.conf(5): Slurm configuration file for the external sensors plugin
extmap.conf(5): Configuration file used by afpd(8) to specify file name extension mappings
ezbounce(1): A highly configurable Internet Relay Chat (IRC) proxy
ezjail.conf(5), -(5): ezjail.conf configuration file for ezjail script
ezmlm-glconf(1): create config file for global ezmlm-request address
ezmlmrc(5): ezmlm-make configuration file
fail2ban-client(1): configure and control the server
faxaddmodem(8c): configure a modem for use with
faxconfig(8c): dynamically change configuration parameters
fconf2(1), fconf2*(1): Converts fidoconfig to another format
fcron.conf(5): configuration file for fcron and fcrontab
fdm.conf(5): fdm configuration file
ffproxy.conf(5): filtering HTTP/HTTPS proxy server configuration file
figpar(3), parse_config(3), get_config_option(3): configuration file parsing library
filter-monkey.conf(5): filter-monkey configuration file
filter-regex.conf(5): filter-regex configuration file
filtermailex(5): filtermail configuration file examples
filtermailrc(5): filtermail configuration file
findlib.conf(5), R findlib.conf(5): [Configuration of findlib/ocamlfind]c
finger.conf(5): finger(1) alias configuration file
fingerconf(5): configuration file for pfinger
firestring_conf_add(3): add an entry to a configuration structure
firestring_conf_delete(3): remove an entry from a configuration structure
firestring_conf_find(3): retrieve a value from a configuration structure
firestring_conf_find_next(3): retrieve an array value from a configuration structure
firestring_conf_free(3): free memory used by a configuration structure
firestring_conf_parse(3): read and parse a configuration file
flexbackup.conf(5), /etc/flexbackup.conf(5): a flexible backup/archiving tool configuration file
flickcurl-config(1): script to get information about the installed version of flickcurl
flowd.conf(5): NetFlow Collector daemon configuration file
fltk-config(1): script to get information about the installed version of fltk
flush_config_file(3): Flushes the current config file to disk. Allegro game programming library
fluxbox-apps(5): per-window attribute configuration for fluxbox(1)
fluxbox-keys(5): keyboard shortcuts configuration for fluxbox(1)
fmtutil.cnf(5): configuration file for fmtutil
fonts-conf(5), fonts.conf(5): Font configuration files
fonulator(1): foneBRIDGE configuration utility
foomatic-configure(1): the main configuration program of the foomatic printing system
fpc.cfg(5): Free Pascal Compiler (FPC) configuration file, name derived from Free Pascal Compiler
fpcmake(5), Makefile.fpc(5): Configuration file for fpcmake
fpcmkcfg(1): The Free Pascal configuration program
free-sa.conf(5): Configuration file for free-sa statistic analyzer
free_config_entries(3): Frees memory allocated for config entry lists. Allegro game programming library
freebsd-update.conf(5): configuration file for freebsd-update(8)
freecell-solver-config(1): DEPRECATED - use pkg-config with libfreecell-solver instead
freehdl-config(1), FreeHDL-CONFIG(1): The FreeHDL configuration script
freetds.conf(5): configuration file for FreeTDS
freetype-config(1): Get information about a libfreetype installation
freshclam.conf(5): Configuration file for Clam AntiVirus database update tool
frox.conf(5): configuration file for frox ftp proxy
fs_exportafs(1): Configures export of AFS to clients of other file systems
fs_setcbaddr(1): Configure IP address used for AFS callbacks
fs_setcell(1): Configures permissions for setuid programs from specified cells
fscd.conf(5): configuration file for fscd(8)
fswatch.conf(5): fswatch configuration file syntax
fswconf(1): shows configuration
ftp-proxy.conf(5): configuration file for FTP-Proxy
ftpcount(1): show current number of connections for each proftpd server configuration
ftpd.conf(5): tnftpd(8) configuration file
ftpsesame(8): automagic packet filter configurator for FTP
fvm-config(1): Script to get information about the installed version of the FVM library
fvwm-config(1): query an existing FVWM installation
fvwm-convert-2.4(1): convert FVWM 2.2.x configuration file to FVWM 2.4 syntax
fvwm-convert-2.6(1): convert FVWM 2.4.x configuration file to FVWM 2.6.x style
fvwm-themes-config(1): fvwm-themes manager and configurator
fwbuilder(1): Multiplatform firewall configuration tool
gammu-config(1): Gammu configurator rst2man-indent-level 0 1 rstReportMargin \$1

gammu-smsdrc(5): gammu-smsd(1) configuration file rst2man-indent-level 0 1 rstReportMargin \$1
gammurc(5): gammu(1) configuration file rst2man-indent-level 0 1 rstReportMargin \$1
gauche-config(1): retrieve configuration parameters of Gauche
gbsplayrc(5): Gameboy sound player configuration file
gcin-tools(1): configuration tools of gcin
gcloud_compute_config-ssh(1), gcloud compute config-ssh(1): populate SSH config files with Host entries from each instance
gcloud_compute_instances_add-access-config(1), gcloud compute instances add-access-config(1): create a Google Compute Engine virtual machine access configuration
gcloud_compute_instances_delete-access-config(1), gcloud compute instances delete-access-config(1): delete an access configuration from a virtual machine network interface
gcloud_config(1), gcloud config(1): view and edit Google Cloud SDK properties
gcloud_config_configurations(1), gcloud config configurations(1): manage the set of gcloud named configurations
gcloud_config_configurations_activate(1), gcloud config configurations activate(1): activates an existing named configuration
gcloud_config_configurations_create(1), gcloud config configurations create(1): creates a new named configuration
gcloud_config_configurations_delete(1), gcloud config configurations delete(1): deletes a named configuration
gcloud_config_configurations_describe(1), gcloud config configurations describe(1): describes a named configuration by listing its properties
gcloud_config_configurations_list(1), gcloud config configurations list(1): lists available named configurations
gcloud_config_list(1), gcloud config list(1): view Google Cloud SDK properties
gcloud_config_set(1), gcloud config set(1): edit Google Cloud SDK properties
gcloud_config_unset(1), gcloud config unset(1): erase Google Cloud SDK properties
gcloud_container_get-server-config(1), gcloud container get-server-config(1): get Container Engine server config
gcloud_deployment-manager_deployments_update(1), gcloud deployment-manager deployments update(1): update a deployment based on a provided config file
gcloud_preview_app_deploy(1), gcloud preview app deploy(1): (BETA) deploy the local code and/or configuration of your app to App Engine
gcloud_preview_app_gen-config(1), gcloud preview app gen-config(1): (BETA) generate missing configuration files for a source directory
gcloud_preview_datastore_cleanup-indexes(1), gcloud preview datastore cleanup-indexes(1): (BETA) remove unused datastore indexes based on your local index configuration
gcloud_preview_datastore_create-indexes(1), gcloud preview datastore create-indexes(1): (BETA) create new datastore indexes based on your local index configuration
gcloud_sql_instances_reset-ssl-config(1), gcloud sql instances reset-ssl-config(1): deletes all client certificates and generates a new server certificate
gcloud_topic_configurations(1), gcloud topic configurations(1): supplementary help for named configurations
gconf-editor(1): an editor for the GConf configuration system
gconftool-2(1): GNOME configuration tool
gdnsd.config(5): gdnsd configuration file
gdome-config(1): script to get information about the installed version of gdome2
genisoimagerc(5): startup configuration file for genisoimage
gentoo(1): A highly configurable file manager for X
get_config_argv(3): Reads a token list from the configuration file. Allegro game programming library
get_config_float(3): Retrieves a float from the configuration file. Allegro game programming library
get_config_hex(3): Retrieves a hexadecimal value from the configuration file. Allegro game programming library
get_config_id(3): Retrieves a driver ID from a configuration file. Allegro game programming library
get_config_int(3): Retrieves an integer from the configuration file. Allegro game programming library
get_config_string(3): Retrieves a string from the configuration file. Allegro game programming library
get_config_text(3): Returns a string translated to the current language. Allegro game programming library
getconf(1): retrieve standard configuration variables
getnetconfig(3), setnetconfig(3), endnetconfig(3), getnetconfigent(3), freenetconfigent(3), nc_perror(3), nc_sperror(3): get network configuration database entry
getnetpath(3), setnetpath(3), endnetpath(3): get /etc/netconfig entry corresponding to NETPATH component
getstyle(1): dumps the current Window Maker style related configuration or creates a theme pack
gettytab(5): terminal configuration data base
ggz-config(6): GGZ Gaming Zone configuration manager
ggz.modules(5): GGZ Gaming Zone module configuration file
gimprc(5): gimp configuration file
git-config(1): Get and set repository or global options
gitweb.conf(5): Gitweb (Git web interface) configuration file
gksu-properties(1): Configure the behaviour of gksu
glXGetConfig(3), "glXGetConfig(3): return information about GLX visuals
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3): allow the user to compose an input line
glib-config(1): script to get information about the installed version of GLib
glutGameModeString(3): sets the game mode configuration via a string
gmond.conf(5): configuration file for ganglia monitoring daemon (gmond)
gnome-control-center(1): Configure GNOME settings
gnome-mount(1): Mount drives and volumes using HAL and read settings from the GNOME desktop configuration system gconf
gofish(5), gofish.conf(5): the configuration file for the GoFish gopher server
gogoc.conf(5): gogoCLIENT Configuration File
gopherrc(5): configuration file for gopher(1)
gpg-error-config(1): Script to get information about the installed version of libgpg-error
graphs.cfg(5): Configuration of the showgraph CGI
gres.conf(5): Slurm configuration file for generic resource management
greylist.conf(5): milter-greylist configuration file
grub-mkconfig(8): generate a GRUB configuration file
grub-syslinux2cfg(1): transform syslinux config into grub.cfg
gsettings(1): GSettings configuration tool
gsl-config(1): script to get version number and compiler flags of the installed GSL library
gst-config(1): configuration for libgst
gsynaptics(1): the Synaptics touchpad configuration utility for Gnome
gtags.conf(5): configuration data for GNU GLOBAL
gtk-config(1): script to get information about the installed version of GTK+
gtkwaverc(5): GTKWave Configuration File
guacd.conf(5), /usr/local/etc/guacd/guacd.conf(5): Configuration file for guacd
guestlist(5): The secondary doormand configuration file
gv-update-userconfig(1): update ~/.gv config file
gw6c.conf(5): Gateway6 Client Configuration File
hast.conf(5): configuration file for the hastd(8) daemon and the hastctl(8) utility
hastmon.conf(5): configuration file for the hastmon(8) deamon and the hastmonctl(8) utility
hccontrol(8): Bluetooth HCI configuration utility
hcsecd.conf(5): hcsecd(8) configuration file
hesiod.conf(5): Configuration file for the Hesiod library
hfst-reweight-tagger(1): =Reweight a tagger accoring to a configuration file
hgrc(5): configuration files for Mercurial rst2man-indent-level 0 1 rstReportMargin \$1
hitch.conf(5), Hitch.conf(5): Configuration file for Hitch rst2man-indent-level 0 1 rstReportMargin \$1
hlmaster.gameserver(1), "hlmaster.gameserver" "(1): How to configure your gameserver to send heartbeats to hlmaster."
hmrc(4): Hypermail configuration file
hook_config_section(3): Hooks a configuration file section with custom handlers. Allegro game programming library
host-setup(1): System configuration setup/management utility
hostapd.conf(5): configuration file for hostapd(8) utility
hosts.cfg(5): Main Xymon configuration file
hpicrypt(1), hpigcrypt(1): An openhpi helper application that encrypts and decrypts a config file
htdigconfig(8): script to create fuzzy databases for ht://Dig
html2psrc(5): configuration file format for html2ps(1)
httpd.conf(5): XS-httpd configuration file
hugo-config(1): Print the site configuration
hwlocality_configuration(3): Topology Detection Configuration and Query
hylafax-config(5f), config(5f): configuration database
i3-config-wizard(1): creates a keysym based config based on your layout
i3-migrate-config-to-v4(1): migrates your i3 config file
iauth.conf(5): The Internet Relay Chat Authentication Configuration File
ibus-setup(1): configuration program for ibus
icmbuild(1): A generic, easy configurable, program maintenance script
icmconf(7): Configuration file for the icmbuild(1) program maintenance script
icu-config(1): output ICU build options
idn.conf(5), .idnrc(5), idnalias.conf(5): configuration files for idnkit library
idn2.conf(5), .idn2rc(5): configuration files for idnkit version 2
idzebra-abs2dom(1): Converts .abs files to DOM XML configuration files
idzebra-config(1): Script to get information about idzebra
ifconfig(8): configure network interface parameters
ifdata(1): get network interface info without parsing ifconfig output
iflibdd(9): Device Dependent Configuration Functions
iflibdi(9): Device Independent Configuration Functions
ifstated.conf(5): Interface State daemon configuration file
igmpproxy.conf(5): Configuration file for igmpproxy (8) multicast daemon
ijs-config(1): script to get information about the installed version of ijs
im-ja-conf(1): A configurator for the im-ja GTK2 Japanese input module

imapfilter_config(5): imapfilter configuration file
inadyn-mt.conf(5): configuration for the inadyn-mt client for open DNS servers
inadyn.conf(5): configuration for the inadyn client for open DNS servers
incoming.conf(5): Configuration of incoming news feeds
indent(3bobcat), FBB::Indent(3bobcat): Configurable text indentation
indexer.conf(5): configuration file for indexer
influxd-config(1): Generate configuration files for InfluxDB
influxd-run(1): Configure and start an InfluxDB server
inn-radius.conf(5): Configuration for nnrpd RADIUS authenticator
inn.conf(5): Configuration data for InterNetNews programs
inncheck(8): Check INN configuration and database files
innconfval(1): Get configuration parameters from inn.conf
innfeed.conf(5): Configuration file for innfeed
innupgrade(8): Upgrade INN configuration files
install-sid(8): update SUBMITTER variable in site or personal config files
iodbc-config(1): script to get information about the installed version of iODBC
iovctl(8): PCI SR-IOV configuration utility
iovctl.conf(5): IOVCTL configuration file
ip6addrctl(8): configure address selection policy for IPv6 and IPv4
ipa.conf(5): -- ipa(8) configuration file
ipastat.conf(5): -- ipastat(8) configuration file
ipcad.conf(5): ipcad configuration file
iplog.conf(5): iplog configuration file
ipmi-config(8): configure IPMI values
ipmi-config.conf(5), ipmi-config(5): IPMI configuration file details
ipmi_lan(5), ipmi/lan.conf(5): IPMI LAN Interface config file
ipmidetectd.conf(5): ipmidetectd configuration file
ipmiseld.conf(5): ipmiseld configuration file
ipsec.conf(5): IPsec configuration and connections
ipup(1): ipdb - ipdb-update.sh - Tools for generating IP based Geo-blocking and Geo-routing tables in order to configure the system's firewall and/or routing facilities .sp
ipv6mon.conf(5): Configuration file for the IPv6 address monitoring daemon (ipv6mon)
ipv6toolkit.conf(5): Configuration file for the SI6 Networks' IPv6 address monitoring daemon (ipv6mon)
irs.conf(5): Information Retrieval System configuration file
isakmpd.conf(5): configuration file for isakmpd
isakmpd.policy(5): policy configuration file for isakmpd
isc-config.sh(1): Get information about the installed version of ISC BIND
iscsi.conf(5): iSCSI initiator configuration file
isns_config(5): iSNS configuration file
istatserver.conf(5): configuration file for istatserver
jabber.xml(5): jabberd daemon configuration file
jail.conf(5): configuration file for jail(8)
jail.conf(5): configuration for the fail2ban server
jails.conf(1): FreeBSD 4.x/5.x/6.x jail management shellscript - configuration
javavm_opts.conf(5): the Java VM wrapper options configuration file
javavms(5): the Java VM wrapper configuration file
job(5): configuration format for jobd
jobcfg(1): configure jobs
kamailio(8): a very fast and configurable SIP server
kamailio.cfg(5): kamailio configuration file
kbdcontrol(1): keyboard control and configuration utility
kbuildsycoca4(8): Rebuilds the system configuration cache
kbuildsycoca5(8): Rebuilds the KService desktop file system configuration cache
kconfig_compiler(1): KDE configuration compiler
kdb5_ldap_util(8): Kerberos configuration utility rst2man-indent-level 0 1 rstReportMargin \$1
kdc.conf(5): Kerberos V5 KDC configuration file rst2man-indent-level 0 1 rstReportMargin \$1

kde4-config(1): Prints KDE installation paths
kf5-config(1): Prints Qt(TM) and Frameworks installation paths
kismet.conf(5): Wireless sniffing and monitoring configuration file
kismet_drone.conf(5): Wireless sniffing and monitoring drone configuration file
kldconfig(8): display or modify the kernel module search path


knife-configure(1): The man page for the knife configure subcommand. rst2man-indent-level 0 1 rstReportMargin \$1






















knl.conf(5): Slurm configuration file for Intel Knights Landing processor
knockcf(5), .knockcf(5): The knock configuration file
knot.conf(5): Knot DNS configuration file rst2man-indent-level 0 1 rstReportMargin \$1
krb.conf(5): Configures the kerberos realm to AFS cell mapping
krb5-config(1): give information on how to link code against Heimdal libraries
krb5.conf(5): configuration file for Kerberos 5
krb5_add_et_list(3), krb5_add_extra_addresses(3), krb5_add_ignore_addresses(3), krb5_context(3), krb5_free_config_files(3), krb5_free_context(3), krb5_get_default_config_files(3), krb5_get_dns_canonize_hostname(3), krb5_get_extra_addresses(3), krb5_get_fcache_version(3), krb5_get_ignore_addresses(3), krb5_get_kdc_sec_offset(3), krb5_get_max_time_skew(3), krb5_get_use_admin_kdc krb5_init_context(3), krb5_init_ets(3), krb5_prepend_config_files(3), krb5_prepend_config_files_default(3), krb5_set_config_files(3), krb5_set_dns_canonize_hostname(3), krb5_set_extra_addresses(3), krb5_set_fcache_version(3), krb5_set_ignore_addresses(3), krb5_set_max_time_skew(3), krb5_set_use_admin_kdc(3): create, modify and delete krb5_context structures
krb5_appdefault_boolean(3), krb5_appdefault_string(3), krb5_appdefault_time(3): get application configuration value
kyua-config(1), kyua config(1): Inspects the values of the loaded configuration
kyua.conf(5): Configuration file for the kyua tool
l2-config(1): OSSP l2 library build utility
l2control(8): L2CAP configuration utility
l2tpd.conf(5): L2TPD configuration file
lament(6): animates the Lament Configuration
latd.conf(5): LAT configuration file
lcdproc-config(5): format of LCDproc's configuration files
lcovrc(5): lcov configuration file
ldap.conf(5), .ldaprc(5): LDAP configuration file/environment variables
ldap_table(5): Postfix LDAP client configuration
ldconfig(8): configure the shared library cache
ldns-config(1): show compiler and linker flags for ldns usage
lftp.conf(5): the global configuration file for lftp
lg.conf(5): looking glass configuration file
lib3ds-config(1): script to get information about the installed version of lib3ds
lib80211(3), lib80211_alloc_regdata(3), lib80211_free_regdata(3), lib80211_regdomain_readconfig(3), lib80211_regdomain_cleanup(3), lib80211_regdomain_findbysku(3), lib80211_regdomain_findbyname(3), lib80211_country_findbycc(3), lib80211_country_findbyname(3): manage net80211 configuration and regulatory database
libao.conf(5): configuration for libao
libcfg+(3): command line and configuration file parsing library
libmap.conf(5): configuration file for dynamic object dependency mapping
libmemcached_check_configuration(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
libmemcached_configuration(3): libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
libmikmod-config(1): script to get information about the installed version of libmikmod
librados-config(8): display information about librados rst2man-indent-level 0 1 rstReportMargin \$1
libssh2_keepalive_config(3): short function description
libucl(3), ucl_parser_new(3), ucl_parser_register_macro(3), ucl_parser_register_variable(3), ucl_parser_add_chunk(3), ucl_parser_add_string(3), ucl_parser_add_file(3), ucl_parser_get_object(3), ucl_parser_get_error(3), ucl_parser_free(3), ucl_pubkey_add(3), ucl_parser_set_filevars(3): universal configuration library parser and utility functions
libunbound(3), unbound.h(3), ub_ctx(3), ub_result(3), ub_callback_type(3), ub_ctx_create(3), ub_ctx_delete(3), ub_ctx_set_option(3), ub_ctx_get_option(3), ub_ctx_config(3), ub_ctx_set_fwd(3), ub_ctx_set_stub(3), ub_ctx_resolvconf(3), ub_ctx_hosts(3), ub_ctx_add_ta(3), ub_ctx_add_ta_autr(3), ub_ctx_add_ta_file(3), ub_ctx_trustedkeys(3), ub_ctx_debugout(3), ub_ctx_debuglevel(3), ub_ctx_async(3), ub_poll(3), ub_wait(3), ub_fd(3), ub_process(3), ub_resolve(3), ub_resolve_async(3), ub_cancel(3), ub_resolve_free(3), ub_strerror(3), ub_ctx_print_local_zones(3), ub_ctx_zone_add(3), ub_ctx_zone_remove(3), ub_ctx_data_add(3), ub_ctx_data_remove(3): Unbound DNS validating resolver 1.6.3 functions
libvga.config(5), svgalibrc(5): the svgalib configuration file
lineakd(1): GUI configurable support for multimedia keyboards
linkcheckerrc(5): configuration file for LinkChecker
list_config_entries(3): Lists the names of all entries in a config section Allegro game programming library
list_config_sections(3): Lists the names of all sections available in the current configuration. Allegro game programming library
livesys(1): Reports the configured CPU/operating system type
llgalrc(5): Configuration file for llgal
llvm-config-cheri(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config-cheri128(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config-devel(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config33(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config34(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config35(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config38(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config39(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
llvm-config40(1), llvm-config(1): Print LLVM compilation options rst2man-indent-level 0 1 rstReportMargin \$1
lmcconfig(8): configuration program for SBE (formerly LMC) wide-area network interface cards
loader.conf(5): system bootstrap configuration information
local-unbound-checkconf(8): Check local-unbound configuration file for errors
log4c-config(1): script to get information about the installed version of log4c
logsurfer.conf(4): configuration file for logsurfer
lpadmin(8): configure cups printers and classes
lpd.conf(5): configuration file for the LPRng line printer spooler system
lprngtool(1): configuration and Graphics User Interface for LPRng
lrzip.conf(5): Configuration File for lrzip
lttng-load(1): Load LTTng tracing session configurations
lttng-save(1): Save LTTng tracing session configurations
lttng-snapshot(1): Take LTTng snapshots and configure snapshot outputs
lurker-list(1): parses lists from the config file
lurker-params(1): parses parameters from the config file
lwres_conf_init(3), lwres_conf_clear(3), lwres_conf_parse(3), lwres_conf_print(3), lwres_conf_get(3): lightweight resolver configuration
lxhotkey(1), LXHotkey(1): A lightweight global keyboard shortcuts configurator
lxinput(1): a light-weight program to configure keyboard and mouse
lxsession-default-apps(1): Configure default applications for LXSession
m17n-config(1): Print compile/link options of the m17n library
mac.conf(5): format of the MAC library configuration file
mach32info(6): read out configuration information of a Mach32
magicfilter(8): automatic configurable printer filter
mailer.conf(5): configuration file for mailwrapper(8)
mailestd.conf(5): mailestd(8) configuration file
mailto.conf(5): configuration file for cups email notifier
mailwrapper(8): invoke appropriate MTA software based on configuration file
mairixrc(5): configuration file for mairix(1)
makepkg.conf(5): makepkg configuration file
man.conf(5): man(1) and manpath(1) configuration files
man2web.conf(5), "man2web.conf(5): man2web configuration file." 4 Item "man2web.conf - man2web configuration file."
maptolayer(1): Utility to generate layers.config files
masqmail.conf(5): masqmail configuration file
masqmail.route(5): masqmail route configuration file
master(5): Postfix master process configuration file format
mate-at-properties(1): configure MATE Assistive Technologies
mate-control-center(1): Configure MATE settings
mate-keybinding-properties(1): configure MATE keybindings
mate-mouse-properties(1): configure MATE mouse preferences
mate-network-properties(1): configure MATE network proxy
mate-screensaver-preferences(1): Configure MATE Screensaver
mate-session-properties(1): Configure applications to start on login
mate-thumbnail-font(1): configure MATE network proxy
mate-typing-monitor(1): configure MATE network proxy
mate-window-properties(1): configure MATE network proxy
mate-wm(1): Start the window manager configured by the user
mconfig(1): Utility for modifying .NET configuration files
mdconfig(8): create and control memory disks
mdmfs(8), mount_mfs(8): configure and mount an in-memory file system using the md(4) driver or the tmpfs(5) filesystem
megarc(5): Configuration file for megatools
mei-config(1): Script to get information about the installed version of the MEI library
memcache_table(5): Postfix memcache client configuration
mergemaster(8): merge configuration files, et al during an upgrade
mesonconf(1): a tool to configure Meson builds
metalog.conf(5): configuration file for metalog
mfschunkserver.cfg(5): main configuration file for mfschunkserver
mfsmaster.cfg(5): main configuration file for mfsmaster
mfsmetalogger.cfg(5): configuration file for mfsmetalogger
mh-tailor(5), mts.conf(5): mail transport configuration for nmh message handler
micorc(5), ~/.micorc(5): MICO configuration file format
mifare_desfire_connect(3), mifare_desfire_disconnect. mifare_desfire_authenticate(3), mifare_desfire_authenticate_aes(3), mifare_desfire_authenticate_iso(3), mifare_desfire_change_key_settings(3), mifare_desfire_get_key_settings(3), mifare_desfire_change_key(3), mifare_desfire_get_key_version(3), mifare_desfire_create_application(3), mifare_desfire_create_application_3k3des(3), mifare_desfire_create_application_aes(3), mifare_desfire_create_application_iso(3), mifare_desfire_create_application_3k3des_iso(3), mifare_desfire_create_application_aes_iso(3), mifare_desfire_delete_application(3), mifare_desfire_get_application_ids(3), mifare_desfire_free_application_ids(3), mifare_desfire_get_df_names(3), mifare_desfire_select_application(3), mifare_desfire_format_picc(3), mifare_desfire_get_version(3), mifare_desfire_free_mem(3), mifare_desfire_set_configuration(3), mifare_desfire_set_default_key(3), mifare_desfire_set_ats(3), mifare_desfire_get_card_uid(3), mifare_desfire_get_file_ids(3), mifare_desfire_get_iso_file_ids(3), mifare_desfire_get_file_settings(3), mifare_desfire_change_file_settings(3), mifare_desfire_create_std_data_file(3), mifare_desfire_create_std_data_file_iso(3), mifare_desfire_create_backup_data_file(3), mifare_desfire_create_backup_data_file_iso(3), mifare_desfire_create_value_file(3), mifare_desfire_create_linear_record_file(3), mifare_desfire_create_linear_record_file_iso(3), mifare_desfire_create_cyclic_record_file(3), mifare_desfire_create_cyclic_record_file_iso(3), mifare_desfire_delete_file(3), mifare_desfire_read_data(3), mifare_desfire_read_data_ex(3), mifare_desfire_write_data(3), mifare_desfire_write_data_ex(3), mifare_desfire_get_value(3), mifare_desfire_get_value_ex(3), mifare_desfire_credit(3), mifare_desfire_credit_ex(3), mifare_desfire_debit(3), mifare_desfire_debit_ex(3), mifare_desfire_limited_credit(3), mifare_desfire_limited_credit_ex(3), mifare_desfire_write_record(3), mifare_desfire_write_record_ex(3), mifare_desfire_read_records(3), mifare_desfire_read_records_ex(3), mifare_desfire_clear_record_file(3), mifare_desfire_commit_transaction(3), mifare_desfire_abort_transaction(3): Mifare DESFire Manipulation Functions
mifluz-config(1): print configuration information for the mifluz library
mimedefang-filter(5): Configuration file for MIMEDefang mail filter
minput_config_command(3m17n): Configure the key sequence of an input method command
minput_config_file(3m17n): Get the name of per-user customization file
minput_config_variable(3m17n): Configure the value of an input method variable
minput_save_config(3m17n): Save configurations in per-user customization file
miredo-checkconf(8): Miredo configuration file syntax checking tool
miredo-server.conf(5): configuration for miredo-server
miredo.conf(5): configuration for Miredo
mk-configure(7): lightweight replacement for GNU autotools
mkcmake(1): wrapper for bmake using mk-configure's Mk files and sys.mk
mkconfigure(1): Compile BSDBuild configure scripts
mke2fs.conf(5): Configuration file for mke2fs
mlvpn.conf(5): MLVPN configuration
mm-config(1): OSSP mm library configuration/build utility
mohawk.conf(5): mohawk(8) configuration file
monitorix.conf(5): Configuration file for Monitorix
mono-config(5): Mono runtime file format configuration
mono-configuration-crypto(1): Mono configuration utility to manage encryption keys and encrypt/decrypt config file sections
morebalance.conf(5): configuration file for the morebalance load balancing tool
mosh_config(1): tool to show configuration for mosh
mosquitto-tls(7): Configure SSL/TLS support for Mosquitto
mosquitto.conf(5): the configuration file for mosquitto
mount.conf(5): root file system mount configuration file
mount.conf(8): root file system mount configuration file
mp3lintrc(5): configuration file for mp3lint
mptable(1): display MP configuration table
mrinfo(8): displays configuration info from a multicast router
mrtg-reference(1): MRTG 2.17.4 configuration reference
mrtg-webserver(1): hints for web server configuration
mtools(5), mtools.conf(5): mtools configuration files '" t TQ \$1 . (is' (if` (pd" St Mtools 4.0.10 '\*(St''%' '%''\*(St'
mtoolstest(1): tests and displays the configuration '" t TQ \$1 . (is' (if` (pd"
munin-node-configure(1): View and modify which plugins are enabled
munin-node.conf(5): Munin-node configuration file
munin.conf(5): Munin configuration file
musicpd.conf(5): Music Player Daemon configuration file
muttrc(5): Configuration file for the Mutt Mail User Agent
mwmrc(5): The M*tif Window Manager configuration file
mydns.conf(5): mydns(8) configuration file
mysql_config(1): display options for compiling clients
mysql_config_editor(1): configure authentication information for connecting to MySQL server
mysql_plugin(1): configure MySQL server plugins
mysql_table(5): Postfix MySQL client configuration
named-checkconf(8): named configuration file syntax checking tool
named.conf(5): configuration file for named
nasd.conf(5): Configuration file for NAS servers
nbd-server(5), /usr/local/etc/nbd-server/config(5): configuration file for nbd-server
nbsmtprc(5): The no-brainer SMTP configuration file
ncid.conf(5): ncid configuration file
ncid2ncid.conf(5): ncid2ncid configuration file
ncidd.conf(5): ncidd configuration file
ncurses6-config(1): helper script for ncurses libraries
ncursesw6-config(1): helper script for ncurses libraries
ne_session_proxy(3), ne_session_socks_proxy(3), ne_session_system_proxy(3), ne_set_addrlist(3): configure proxy servers
neon-config(1): script providing information about installed copy of neon library
net-snmp-config(1): returns information about installed net-snmp libraries and binaries
net-snmp-create-v3-user(1): create a SNMPv3 user in net-snmp configuration file
netatalk-config(1): script to get information about the installed version of netatalk
netatalk.conf(5): Configuration file used by Netatalk to determine its general configuration
netconfig(5): network configuration data base
netrikrc(5): netrik configuration file
newsyslog.conf(5): newsyslog(8) configuration file
ngircd.conf(5): configuration file of ngIRCd
noffle.conf(5): Configuration file for NOFFLE news server
nonstop.conf(5): Slurm configuration file for fault-tolerant computing
nsca-ng.cfg(5): NSCA-ng server configuration file
nscd.conf(5): nscd configuration file
nsd-checkconf(8): NSD configuration file checker
nsd.conf(5): NSD configuration file
nslcd.conf(5): configuration file for LDAP nameservice daemon
nsmb.conf(5): configuration file for SMB requests
nss_mdns.conf(5): configuration file for libnss_mdns(8)
nsscache.conf(5): NSS local cache synchroniser configuration file
nsswitch.conf(5): name-service switch configuration file
ntp.conf(5): Network Time Protocol (NTP) daemon configuration file format
ntpd.conf(5): Network Time Protocol daemon configuration file
numactl(1): manage NUMA policy configuration
nurbs++-config(1): script to get information about the installed version of nurbs++
nvidia-settings(1): configure the NVIDIA graphics driver
nvidia-xconfig(1): manipulate X configuration files for the NVIDIA driver
nvram_export(1): Cisco NVRAM configuration export
nylon(1): a lightweight and highly configurable proxy server
obi2ncid.conf(5): obi2ncid configuration file
object-expirer.conf(5): configuration file for the openstack-swift object exprier daemon
object-server.conf(5): configuration file for the openstack-swift object server
ocf_heartbeat_AudibleAlarm(7): Emits audible beeps at a configurable interval
ocf_heartbeat_db2(7): Resource Agent that manages an IBM DB2 LUW databases in Standard role as primitive or in HADR roles as master/slave configuration. Multiple partitions are supported
octave-config(1): GNU Octave component and library information retrieval
odbc.ini(5), /etc/odbc.ini(5), $HOME/.odbc.ini(5): unixODBC data sources configuration
odbc_config(1): get compile options for compiling unixODBC client
odbcinst(1): An unixODBC tool for manipulating configuration files
odbcinst.ini(5), /etc/odbcinst.ini(5): An unixODBC drivers configuration
ods-getconf(8): OpenDNSSEC get configuration values
ohhandler(1): An openhpi sample application that uses the openhpi additional interfaces to control openhpi configuration. That is plugins can be loaded, plugin instances (handlers) created, unloaded or their configuration displayed
ohparam(1): An openhpi sample application that uses the openhpi additional interface to control openhpi configuration parameters
oidentd.conf(5): The oidentd configuration file
oidentd_masq.conf(5): oidentd IP masquerading/NAT configuration file
olsrd.conf(5): configuration file for olsrd(8)
onyx_config(1): configuration helper for building with libonyx
opam-config(1): Display configuration options for packages
openbox(1): A minimalistic, highly configurable, next generation window manager with extensive standards support
opencryptoki.conf(5): Configuration file for pkcsslotd
opendkim.conf(5): Configuration file for opendkim
opendmarc.conf(5): Configuration file for opendmarc
openscep.cnf(5): OpenSCEP configuration file
opensips.cfg(5): opensips configuration file
optionFileLoad(3): Load the locatable config files, in order
oroborusrc(5): oroborus(1) configuration file
orpierc(5): is the configuration textfile for the orpie(1) console calculator
oscam.cacheex(5), oscam..cacheex(5): global ECM length matching configuration file for OSCam
oscam.conf(5): main configuration file for OSCam
oscam.dvbapi(5): DVB API configuration file for OSCam
oscam.server(5): reader configuration file for OSCam
oscam.srvid(5): service ID configuration file for OSCam
oscam.srvid2(5): service ID configuration file for OSCam
oscam.tiers(5): TIER configuration file for OSCam
oscam.user(5): user configuration file for OSCam
oscam.whitelist(5): global ECM length whitelisting configuration file for OSCam
override_config_data(3): Specifies a block of data containing config overrides. Allegro game programming library
override_config_file(3): Specifies a file containing config overrides. Allegro game programming library
ovs-appctl(8): utility for configuring running Open vSwitch daemons
ovs-vlan-bug-workaround(8): utility for configuring Linux VLAN driver bug workaround
ovs-vsctl(8): utility for querying and configuring ovs-vswitchd
ovs-vswitchd.conf.db(5), Open_vSwitch(5): Open_vSwitch database schema A database with this schema holds the configuration for one Open vSwitch daemon. The top-level configuration for the daemon is the Open_vSwitch table, which must have exactly one record. Records in other tables are significant only when they can be reached directly or indirectly from the Open_vSwitch table. Records that are not reachable from the Open_vSwitch table are automatically deleted from the database, except for records in a few distinguished ``root set(cq(cq tables
owampd.conf(5): One-way latency daemon configuration file
owampd.limits(5): One-way latency server policy configuration file
owfs.conf(5): owfs programs configuration file
oyranos-config(3): Oyranos CMS configuration query for builds and locations
oyranos-config-fltk(1): Oyranos CMS configuration panel
oyranos-monitor(1): Oyranos CMS monitor configuration
pacman.conf(5): pacman package manager configuration file
pacmd(1): Reconfigure a PulseAudio sound server during runtime
pads.conf(8): pads configuration file
pam_mount.conf(5): Description of the pam_mount configuration file
pam_winbind.conf(5): Configuration file of PAM module for Winbind
paperconf(1): print paper configuration information
paperconfig(8): configure the system default paper size
parrot_config(1), Header "Name" parrot_config(1): Parrot Configuration
pathconf(2), lpathconf(2), fpathconf(2): get configurable pathname variables
pbi.conf(5): PBI Configuration File
pcap-config(1): write libpcap compiler and linker flags to standard output
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9): PCI bus interface
pci_iov_schema(9), pci_iov_schema_alloc_node(9), pci_iov_schema_add_bool(9), pci_iov_schema_add_string(9), pci_iov_schema_add_uint8(9), pci_iov_schema_add_uint16(9), pci_iov_schema_add_uint32(9), pci_iov_schema_add_uint64(9), pci_iov_schema_add_unicast_mac(9): PCI SR-IOV config schema interface
pconfig(6): Print Empire configuration
pcre-config(1): program to return PCRE configuration
pcre16_config(3), PCRE(3): Perl-compatible regular expressions
pcre2-config(1): program to return PCRE2 configuration
pcre2_config(3), PCRE2(3): Perl-compatible regular expressions (revised API)
pdfpcrc(5): pdfpc configuration file
pdnsd.conf(5): The configuration file for pdnsd config
pefs(8): configure pefs file systems
periodic.conf(5): periodic job configuration information
personality(8): system configuration management utility
pf.conf(5): packet filter configuration file
pfqueue.conf(5): pfqueue configuration file
pg_config(1): retrieve information about the installed version of PostgreSQL
pgbouncer(5), pgbouncer.ini(5): configuration file for pgbouncer rst2man-indent-level 0 1 rstReportMargin \$1
pgsql_table(5): Postfix PostgreSQL client configuration
php-config(1): get information about PHP configuration and compile options
pim6dd.conf(5): config file for pim6dd, PIM for IPv6 dense mode daemon
pim6sd.conf(5): config file for pim6sd, PIM-SM daemon for IPv6
pivman(1): Tool for configuring your PIV-enabled YubiKey
pkcscca(1): configuration utility for the CCA token
pkcsconf(1): configuration utility for the pkcsslotd daemon
pkcsicsf(1): configuration utility for the ICSF token
pkg-alias(8), pkg alias(8): display configured aliases
pkg-config(8), pkg config(8): retrieve the value of a given configuration option
pkg.conf(5): system-wide configuration file for pkg(1)
pkgconf(1): a system for configuring build dependency information
pkgtools.conf(5): configuration file for the pkgtools suite
pksd.conf(5): Public Key Server Daemon configuration file
plugger(7): a streaming multimedia plugin for UNIX netscape pluggerrc - configure file for plugger
pmc_configure_logfile(3), pmc_flush_logfile(3), pmc_writelog(3), pmc_close_logfile(3): log file management
pokerconfigupgrade(8): upgrade poker XML configuration files to match the software version
policyd-weight.conf(5): policyd-weight configuration parameters
polkit-config-file-validate(1): Validate a PolicyKit configuration file
polygraph-dns-cfg(1): DNS server configuration tool
polygraph-pgl2ldif(1): LDIF (and other text-based) configuration generator
pop3lite.conf(5), /usr/local/etc/pop3lite.conf(5): configuration file for pop3lite(8)
pop_config_state(3): Pops a previously pushed configuration state. Allegro game programming library
portconfig(1): run make(1) targets on ports(7) that need updating
portfwd.cfg(5): Portfwd configuration file
portshaker.conf(5): format of the portshaker(8) configuration file
portsnap.conf(5): configuration file for portsnap(8)
porttools(5), ~/.porttools(5): FreeBSD Port Tools configuration file
postconf(1): Postfix configuration utility
postconf(5): Postfix configuration parameters
powerman.conf(5): configuration file for PowerMan
ppl-config(1): obtain information about an installation of the Parma Polyhedra Library
pppoe-setup(8): Shell script to configure Roaring Penguin PPPoE client
pppoe.conf(5): Configuration file used by pppoe-start(8), pppoe-stop(8), pppoe-status(8) and pppoe-connect(8)
pptpd.conf(5): PPTP VPN daemon configuration
prayer.cf(5): main Prayer configuration file
printers.conf(5): printer configuration file for cups
proftpd(8): Professional configurable, secure file transfer protocol server
proftpd.conf(5): ProFTPD server configuration file
protocols.cfg(5): Configuration of TCP network services
proxsmtpd.conf(5): the configuration file for proxsmtpd(8)
proxy-server.conf(5): configuration file for the openstack-swift proxy server
psiconv-config(1): script to get information about the installed version of Psiconv
psiconv.conf(5): Configuration for libpsiconv
pspell-config(1): prints information about a libpspell installation
pth-config(1): Pth library build utility
pthread-config(1): Pth pthread library build utility
ptop(1): The FPC Pascal configurable source beautifier. Origin probably Pascal-TO-Pascal
ptop.cfg(5): The ptop source-beautifier configuration file. ptop is the source beautifier of the FreePascal project. Origin probably Pascal-TO-Pascal.cfg
ptpd2.conf(5): Precision Time Protocol daemon config file
pulse-client.conf(5): PulseAudio client configuration file
pulse-daemon.conf(5): PulseAudio daemon configuration file
puppet-config(8): Interact with Puppet's settings
push_config_state(3): Pushes the current configuration state. Allegro game programming library
pvm_config(3): Returns information about the present virtual machine configuration
pw.conf(5): format of the pw.conf configuration file
pwquality.conf(5): configuration for the libpwquality library
pwscore(1): simple configurable tool for checking quality of a password
pybugz.d(5): configuration files for pybugz
qadsl.conf(5): qadsl configuration file
qconfirm-control(1): change qconfirm configuration through email
quickie-config(1): print configuration parameters "quickie-config(1)" "print configuration parameters"
quvirc09(5), quvirc(5): The simple configuration file for the quvi program
r2test.conf(5): OpenR2 r2test program configuration file
racoon.conf(5): configuration file for racoon
radius.conf(5): RADIUS client configuration file
radiusd.conf(5): configuration file for the FreeRADIUS server
radrelay.conf(5): configuration file for the FreeRADIUS server "radrelay" personality
radsecproxy.conf(5): Radsec proxy configuration file
radvd.conf(5): configuration file of the router advertisement daemon radvd
raidfile-config(8): Configure Box Backup's RAID files
rancid(1): Cisco configuration filter
rancid.conf(5): rancid environment configuration file
rancid.types.conf(5): rancid device type configuration file
rancid_intro(1): introduction to the Really Awesome New Cisco confIg Differ
ranonymize(5), ranonymize.conf(5): ranonymize(1) configuration file
raptor-config(1): script to get information about the installed version of Raptor
rasqal-config(1): script to get information about the installed version of the RDF query library
rc.conf(5): system configuration information
rcrc(5): configuration for rcm
rcsfreeze(1): freeze a configuration of sources checked in under RCS
reader.conf(5): configuration file for pcscd readers' drivers
readers.conf(5): Access control and configuration for nnrpd
recoll.conf(5): main personal configuration file for Recoll
redland-config(1): script to get information about the installed version of Redland
refdb-bug(1): RefDB tool: writes text file containing summary of RefDB's configuration
regina-config(1): Developer Configuration for The Regina Rexx interpreter
register_config_handler(3), register_const_config_handler(3), register_prenetsnmp_mib_handler(3), unregister_config_handler(3), register_mib_handlers(3), unregister_all_config_handlers(3), register_app_config_handler(3), register_app_prenetsnmp_mib_handler(3), unregister_app_config_handler(3), read_configs(3), read_premib_configs(3), read_config_print_usage(3), config_perror(3), config_pwarn(3): netsnmp_config_api functions
relayd.conf(5): relay daemon configuration file
reload_config_texts(3): Reloads translated strings returned by get_config_text(). Allegro game programming library
resolvconf(8): a framework for managing multiple DNS configurations
resolvconf.conf(5): resolvconf configuration file
resolver(5): resolver configuration file
rn2ncid.conf(5): rn2ncid configuration file
rndc.conf(5): rndc configuration file
router.db(5): rancid group configuration file
roxterm-config(1): terminal emulator
rrdbot.conf(5): configuration files for rrdbotd(8)
rrenumd.conf(5): configuration file for router renumbering daemon
rssh.conf(5), ${prefix}/etc/rssh.conf(5): configuration file for rssh
rsyncd.conf(5): configuration file for rsync in daemon mode
rsyslog.conf(5): rsyslogd(8) configuration file
rtadvd.conf(5): config file for router advertisement daemon
rudeconfig(3): read and manipulate .ini and config files
rudiments-config(1): helper script for rudiments library
rwsiteinfo(1): Print information from the silk.conf site configuration file
samhainrc(5): samhain(8) configuration file
sane-config(1): get information about the installed version of libsane
sane-usb(5): USB configuration tips for SANE
sasl_getconfpath_t(3): The SASL callback to indicate location of the config files
sawfish-config(1): The Sawfish Configurator
sb16config(8): configuration utility for Granch SBNI16-SHDSL PCI modems
sc-config(1): The sc-config program is used to obtain information about MPQC's compile time environment
scepconf(1): read configuration parameters of OpenSCEP
scontrol(1): Used view and modify Slurm configuration and state
scrollkeeper-config(1): print ScrollKeeper configuration information
scrollkeeper.conf(5): ScrollKeeper configuration file
sdig.conf(5): Configuration for the Switch Digger
send_nsca.cfg(5): NSCA-ng client configuration file
sensor.conf(5): Sensor Configuration file for rwflowpack and flowcap
serveez-config(1): The configuration script
sesman.ini(5): Configuration file for xrdp-sesman(8)
set_config_data(3): Sets a block of configuration data. Allegro game programming library
set_config_file(3): Sets the configuration file. Allegro game programming library
set_config_float(3): Writes a float in the configuration file. Allegro game programming library
set_config_hex(3): Writes a hexadecimal integer in the configuration file. Allegro game programming library
set_config_id(3): Writes a driver ID in the configuration file. Allegro game programming library
set_config_int(3): Writes an integer in the configuration file. Allegro game programming library
set_config_string(3): Writes a string in the configuration file. Allegro game programming library
setpci(8): configure PCI devices
sg_get_config(8): send SCSI GET CONFIGURATION command (MMC-4 +)
showvte(1): show build-time configuration of evilvte
shtk_config(3), config(3): Configuration file processing and queries
shtk_config_get(3): Gets the value of a defined configuration variable
shtk_config_get_bool(3): Gets the value of a boolean configuration variable
shtk_config_get_default(3): Gets the value of a possibly-unset configuration variable
shtk_config_has(3): Checks if a configuration variable is set
shtk_config_include(3): Includes a file within a configuration file
shtk_config_init(3): Initializes the configuration module
shtk_config_load(3): Loads a configuration file
shtk_config_override(3): Records an override to be applied to the configuration
shtk_config_run_hook(3): Executes a hook defined in a configuration file
shtk_config_set(3): Sets the value of a configuration variable
shtk_config_unset(3): Clears a configuration variable
sic-server(5): format of the server configuration file used by sic(1)
sicontrol(8): Specialix SI/XIO driver configuration and debugging
silk.conf(5): SiLK site configuration file
silk_config(1): Print SiLK compiling and linking information
sip2ncid.conf(5): sip2ncid configuration file
siteconfig(1): online configuration of FTP server (wzdftpd)
slack(8): Sysadmin's lazy autoconfiguration kit
slack.conf(5): configuration file for slack
slapd-config(5): configuration backend to slapd
slapd.access(5): access configuration for slapd, the stand-alone LDAP daemon
slapd.conf(5): configuration file for slapd, the stand-alone LDAP daemon
slapd.plugin(5): plugin configuration for slapd, the stand-alone LDAP daemon
slaptest(8): Check the suitability of the OpenLDAP slapd configuration
slurm.conf(5): Slurm configuration file
slurm_create_partition(3), slurm_create_reservation(3), slurm_delete_partition(3), slurm_delete_reservation(3), slurm_init_part_desc_msg(3), slurm_init_resv_desc_msg(3), slurm_reconfigure(3), slurm_shutdown(3), slurm_takeover(3), slurm_init_update_node_msg slurm_update_node(3), slurm_update_partition(3), slurm_update_reservation(3): Slurm administrative functions
slurmdbd.conf(5): Slurm Database Daemon (SlurmDBD) configuration file
smap(1): graphically view information about Slurm jobs, partitions, and set configurations parameters
smartd.conf(5): SMART Disk Monitoring Daemon Configuration File
smb.conf(5): The configuration file for the Samba suite
smbgetrc(5): configuration file for smbget
smi_config(3), smiInit(3), smiExit(3), smiSetErrorLevel(3), smiGetFlags(3), smiSetFlags(3), smiLoadModule(3), smiGetPath(3), smiSetPath(3), smiReadConfig(3): SMI library configuration routines
smokeping_config(5): Reference for the SmokePing Config File
smokeping_examples(5): Examples of Smokeping configuration
smp_conf_general(8): invoke CONFIGURE GENERAL SMP function
smp_conf_phy_event(8): invoke CONFIGURE PHY EVENT function
smp_conf_route_info(8): invoke CONFIGURE ROUTE INFORMATION SMP function
smp_conf_zone_man_pass(8): invoke CONFIGURE ZONE MANAGER PASSWORD function
smp_conf_zone_perm_tbl(8): invoke CONFIGURE ZONE PERMISSION TABLE function
smp_conf_zone_phy_info(8): invoke CONFIGURE ZONE PHY INFORMATION function
smp_rep_self_conf_stat(8): invoke REPORT SELF-CONFIGURATION STATUS SMP function
smtp-gated.conf(5): The smtp-gated configuration file
smtpd.conf(5): Simple Mail Transfer Protocol daemon configuration file
sniffit(5): configuration file for sniffit (name arbirtary)
snmp.conf(5): configuration files for the Net-SNMP applications
snmp.conf(5): snmp configuration file for cups
snmp_config(5): handling of Net-SNMP configuration files
snmpconf(1): creates and modifies SNMP configuration files
snmpd.conf(5): configuration file for the Net-SNMP SNMP agent
snmpd.examples(5): example configuration for the Net-SNMP agent
snmpd.internal(5): internal configuration of the Net-SNMP agent
snmpnetstat(1): display networking status and configuration information from a network entity via SNMP
snmptrapd.conf(5): configuration file for the Net-SNMP notification receiver
sockd.conf(5): Dante server configuration file syntax
socks.conf(5): socks client configuration file syntax
softhsm.conf(5): SoftHSM configuration file
softhsm2.conf(5): SoftHSM configuration file
soqt-config(1): Display SoQt Library Configuration
soundmodemconfig(8): Soundcard modem configuration utility
source-highlight-settings(1), Source-highlight-settings(1): utility that can be used to write a configuration file for GNU Source-highlight (and its library)
soxt-config(1): Display SoXt Library Configuration
spamd.conf(5): spamd configuration file
spamoracle.conf(5): SpamOracle configuration file format
splat.conf(5): Scalable Periodic LDAP Attribute Transmogrifier configuration file
spmfilter.conf(5): configuration file for spmfilter
sqlite_table(5): Postfix SQLite configuration
sqpack(1): purges squish msgbases taken from fidoconfig
ss5.conf(5): Configuration file for the ss5 daemon
ss5.ha(5): Contains directives for centralized configuration management
ss5.pam(5): Contains configuration lines for PAM authentication
ssh_config(5): OpenSSH SSH client configuration files
sshd_config(5): OpenSSH SSH daemon configuration file
ssl-admin.conf(5): configuration file for ssl-admin
ssltunnelrc(5): SSL Tunnel client configuration file
ssmtp.conf(5): ssmtp configuration file
sssd-ad(5): the configuration file for SSSD
sssd-ipa(5): the configuration file for SSSD
sssd-krb5(5): the configuration file for SSSD
sssd-ldap(5): the configuration file for SSSD
sssd-simple(5): the configuration file for SSSDs simple access-control provider
sssd-sudo(5): Configuring sudo with the SSSD back end
sssd.conf(5): the configuration file for SSSD
sssd_krb5_locator_plugin(8): the configuration file for SSSD
statgrab-make-mrtg-config(1): generates MRTG configuration
statgrab-make-mrtg-index(1): generates MRTG configuration
storage.conf(5): Configuration file for storage manager
str-config(1): Str library build utility
strongswan.conf(5): strongSwan configuration file
subscriptions.conf(5): subscription configuration file for cups
sudo.conf(5): configuration for sudo front end
super_mediator.conf(1): Configuration file for super_mediator
supybot-wizard(1): A wizard for creating Supybot configuration files
surfraw-update-path(1): updates PATH in shell config files
svnserve.conf(5): Repository configuration file for svnserve
svnup.conf(5): Configuration file for svnup(1)
swanctl(8): strongSwan configuration, control and monitoring command line interface
swanctl.conf(5): swanctl configuration file
swapd.conf(5): swapd configuration file
swish++.conf(4): SWISH++ configuration file format
sxfcgi.conf(5): configuration file for sx.fcgi
sxinit(1): manage local access configuration for SX clusters
sxreport-client(1): generate a report about the system and client configuration
sxreport-server(8): collect configuration and logs from SX nodes
sxsetup(8): configure and display information about an SX node
sxsetup.conf(5): configuration file for sxsetup
sympa.conf(5), robot.conf(5): Configuration file for default site and robot
synce_get_directory(3): get synce configuration directory
sysconf(3): get configurable system variables
sysconftool(1): install configuration files
sysconftool(7): format of configuration files installed by sysconftool
sysconftoolcheck(1): check a sysconftool configuration file
sysgather(1): a configuration file mismanager $Ringlet: sysgather.pl 1279 2007-05-10 08:56:31Z roam $
sysinfo(8): utility used to gather system configuration information
sysinfo.conf(5), /usr/local/etc/sysinfo.conf(5): sysinfo(8) configuration file
syslog-ng.conf(5): syslog-ng configuration file
syslog.conf(5): syslogd(8) configuration file
sysmon.conf.man(8), sysmon.conf(8): sysmond(man) configuration file
system-config-printer(1): configure a CUPS server
system-config-printer-applet(1): print job manager
tac_plus.conf(5): tacacs+ daemon configuration file
tacplus.conf(5): TACACS+ client configuration file
tapeconfig(5): Defines parameters for tape devices and backup data files
tarsnap.conf(5): configuration file for tarsnap(1)
taskdrc(5): Configuration details for the taskd(1) server
taskrc(5): Configuration details for the task(1) command
tayga.conf(5): configuration file of the TAYGA stateless NAT64 daemon
tc-configCcache(1), tc configCcache(1): Configure Tinderbox ccache parameters
tc-configDistfile(1), tc configDistfile(1): Configure Tinderbox distfile parameters
tc-configGet(1), tc configGet(1): Print current Tinderbox configuration
tc-configJail(1), tc configJail(1): Configure Tinderbox Jail parameters
tc-configTinderd(1), tc configTinderd(1): Configure Tinderbox tinder daemon (tinderd) parameters
tcpdchk(8): tcp wrapper configuration checker
tcsd.conf(5): configuration file for the trousers TCS daemon
terminator_config(5), ~/.config/terminator/config(5): the config file for Terminator terminal emulator
testparm(1): check an smb.conf configuration file for internal correctness
texconfig(1): configures teTeX or TeX Live texconfig-sys - configures teTeX or TeX Live system-wide
tigrc(5): Tig configuration file
timidity.cfg(5): configure file of TiMidity++
tinc.conf(5): tinc daemon configuration
tinyproxy.conf(5): Tinyproxy HTTP proxy daemon configuration file
tls_client(3), tls_server(3), tls_configure(3), tls_free(3): configure a TLS connection
tls_config_ocsp_require_stapling(3): OCSP configuration for libtls
tls_config_set_protocols(3), tls_config_parse_protocols(3), tls_config_set_alpn(3), tls_config_set_ciphers(3), tls_config_set_dheparams(3), tls_config_set_ecdhecurve(3), tls_config_prefer_ciphers_client(3), tls_config_prefer_ciphers_server(3): TLS protocol and cipher selection
tls_config_set_session_id(3), tls_config_set_session_lifetime(3), tls_config_add_ticket_key(3): configure resuming of TLS handshakes
tls_config_verify(3), tls_config_insecure_noverifycert(3), tls_config_insecure_noverifyname(3), tls_config_insecure_noverifytime(3): insecure TLS configuration
tls_init(3), tls_config_new(3), tls_config_free(3), tls_config_error(3): initialize TLS client and server API
tls_load_file(3), tls_config_set_ca_file(3), tls_config_set_ca_path(3), tls_config_set_ca_mem(3), tls_config_set_cert_file(3), tls_config_set_cert_mem(3), tls_config_set_key_file(3), tls_config_set_key_mem(3), tls_config_set_ocsp_staple_mem(3), tls_config_set_ocsp_staple_file(3), tls_config_set_keypair_file(3), tls_config_set_keypair_mem(3), tls_config_set_keypair_ocsp_file(3), tls_config_set_keypair_ocsp_mem(3), tls_config_add_keypair_file(3), tls_config_add_keypair_ocsp_mem(3), tls_config_add_keypair_ocsp_file(3), tls_config_add_keypair_mem(3), tls_config_clear_keys(3), tls_config_set_verify_depth(3), tls_config_verify_client(3), tls_config_verify_client_optional(3): TLS certificate and key configuration
tn5250rc(5): tn5250 and lp5250d configuration file
tntnet-config(1): output compiler flags for tntnet (8) usage
tntnet.properties(7), " ===================================================================== tntnet.properties(7): configuration-file for tntnet (8) " =====================================================================
tntnet.xml(7): configuration file for tntnet (8)
topology.conf(5): Slurm configuration file for defining the network topology
torrus_compilexml(1), compilexml(1): Torrus XML configuration (re)compiler
torrus_configinfo(1), configinfo(1): Displays useful statistics for all Torrus trees
torrus_configsnapshot(1), configsnapshot(1): Generates a configuration snapshot for a Torrus tree
torrus_devdiscover(1), devdiscover(1): Performs SNMP discovery and generates Torrus XML configuration file
torrus_rrddir2xml(1), rrddir2xml(1): Searches a directory for RRD files and generates Torrus XML configuration file
torsocks.conf(5): Configuration file for torsocks(8)
toxic.conf(5): Configuration file for toxic
tp-magic-config(1): -- Helps creating 'Magic' tool plugins for Tux Paint(1)
tparser(1): Parses Fidoconfig
tpop3d.conf(5): configuration file for tpop3d(8)
tracker-reset(1): Reset the index and configuration
trickled.conf(5): format of the configuration file used by trickled(8)
tsocks.conf(5): configuration file for tsocks(8)
tuxpaint-config(1): -- A configuration tool for Tux Paint, a drawing program for young children
tvmet-config(1): script to get information about the installed version of tvmet
twconfig(5): Tripwire configuration file reference
ucommon-config(1): script to get information about ucommon library
uhidd.conf(5): uhidd configuration file
unbound-checkconf(8): Check unbound configuration file for errors
unbound.conf(5): Local-unbound configuration file
unbound.conf(5): Unbound configuration file
unieject.conf(5): Configuration file for unieject(1) tool
updatedd-wrapper(1): config- and cachefile support for updatedd
updatedd-wrapper.conf(5): configuration file for updatedd-wrapper
updmap.cfg(5): configuration of font mapping/inclusion for dvips and friends
upgrade-windowmaker-defaults(8): Convert old wmaker configuration files
upsd.conf(5): Configuration for Network UPS Tools upsd
upsmon.conf(5): Configuration for Network UPS Tools upsmon
upssched.conf(5): Configuration for upssched timer program
usbconfig(8): configure the USB subsystem
uscheduleconf(1): configure a scheduling service
user-dirs.conf(5): configuration for xdg-user-dirs-update
userneu.conf(5): Configuration file of userneu(8)
uuchk(8): displays information from the UUCP configuration
uuconv(1): convert UUCP configuration files
uuid-config(1): OSSP uuid API build utility
v4l-conf(8): configure a video4linux driver
val-config(1): OSSP val build utility
var-config(1): OSSP var library build utility
vchanger.conf(5): configuration file for *vchanger(8)*
vcl(7), VCL(7): Varnish Configuration Language rst2man-indent-level 0 1 rstReportMargin \$1
vdltodmx(1): dmx configuration file parser and printer
vfsconf(9): vfs configuration information
vga_getmonitortype(3): returns the monitor type configured
vga_getmousetype(3): returns the mouse type configured
vidcontrol(1): system console control and configuration utility
virt-pki-validate(1): validate libvirt PKI files are configured correctly
vitrc(5): Configuration file for the vit(1) command
vncconfig(1): configure and control a VNC server
vnstat.conf(5): vnStat configuration file
votequorum(5): Votequorum Configuration Overview
vsftpd.conf(5): config file for vsftpd
vtep-ctl(8): utility for querying and configuring a VTEP database
vtund.conf(5): VTun(Virtual Tunnel) daemon configuration file
wackamole.conf(5): Wackamole daemon configuration file
wammu-configure(1), wammu-configurator(1): program to configure Gammu engine (used by Wammu)
wbar-config(1): GUI to customize wbar
wc2ncid.conf(5): wc2ncid configuration file
weatherrc(5): configuration file format for the weather (1) utility
whoson.conf(5): whoson configuration file
wigwam(1): check the Hiawatha webserver configuration for non-critical errors
wildmidi.cfg(5): Config file for libWildMidi
winecfg(1): Wine Configuration Editor
wmakerconf(1): configure the Window Maker X window manager
wmapplrc(5): configuration file for wmappl
wmbiffrc(5): configuration file for wmbiff (1)
wmclockmon-config(1): A program to configure wmclockmon
wmconfig(1x): Window Manager Config helper program
wmmaiload-config(1): Configuration window for wmmaiload dockapp
wpa_supplicant.conf(5): configuration file for wpa_supplicant(8)
wwwoffle.conf(5): The configuration file for the proxy server for the World Wide Web Offline Explorer
wyrdrc(5): is the configuration textfile for the wyrd(1) console calendar application
wzd-config(1): retrieve information about the installed version of wzdftpd
x10config(5), x10config^(5): Configuration file format for HEYU, an X-10 CM11A serial interface control program
x509v3_config(5): X509 V3 certificate extension configuration format
xapian-config(1): report information about the installed version of xapian
xawtvrc(5): -- TV apps config file
xcb_configure_notify_event_t(3): NOT YET DOCUMENTED
xcb_configure_window(3): Configures window attributes
xconq(6): X-based configurable strategy game
xdg-user-dirs-update(1): Update XDG user dir configuration
xdmxconfig(1): a graphical configuration tool for Xdmx configuration files
xdriinfo(1): query configuration information of DRI drivers
xfce4-notifyd-config(1): configuration GUI for xfce4-notifyd
xfs_size_check(8): Verifies proper IRIX inode configuration
xine-config(1): script to get information about the installed version of libxine
xinetd.conf(5): Extended Internet Services Daemon configuration file
xinput(1): utility to configure and test X input devices
xkeyboard-config(7): XKB data description files
xl.cfg(5): XL Domain Configuration File Syntax
xl.conf(5), /etc/xen/xl.conf(5): XL Global/Host Configuration
xlcpupool.cfg(5): XL Cpupool Configuration File Syntax
xmbind(1): Configures virtual key bindings "xmbind"
xmedcon-config(1): script to get info about the installed version of (X)MedCon
xml2-config(1), xml-config(1): script to get information about the installed version of GNOME-XML
xmlsec1-config(1): detail installed version of xmlsec library
xneurrc(5): configuration file for XNeur
xorg.conf(5), xorg.conf.d(5): configuration files for Xorg X server
xosd-config(1): script to get information about the installed version of libxosd
xrdp.ini(5): Configuration file for xrdp(8)
xsconf(5), .xsconf(5): XS-httpd local configuration file
xstow.ini(5): config file for XStow
xymon-xmh(5), Xymon-XMH-variables(5): Configuration items available online
yac2ncid.conf(5): yac2ncid configuration file
yadifa.rc(5): is the configuration file for yadifa(8)
yadifad.conf(5): configuration file for yadifad(8)
yaf.init(1): YAF configuration file
yafic.conf(5): -- yafic(1) configuration file
yapet_colors(5): format of YAPET color configuration
yapet_config(5): format of YAPET configuration file
yate-config(8): retrieve metainformation about the YATE telephony engine
yaws.conf(5), /usr/local/etc/yaws/yaws.conf(5): Configuration file for the Yaws web server
yaz-config(1): Script to get information about YAZ
yazpp-config(1): Script to get information about YAZ++
ypldap.conf(5): LDAP YP map daemon configuration file
ypostrc(5), ~/.ypostrc(5): ypost configuration file
yum-updatesd.conf(5): Configuration file for yum-updatesd(8)
yum.conf(5): Configuration file for yum(8)
zathurarc(5): zathura configuration file rst2man-indent-level 0 1 rstReportMargin \$1
zconfig(3): work with config files written in rfc.zeromq.org/spec:4/ZPL
zfs(8): configures ZFS file systems
zgossip(3): decentralized configuration management
zkt-conf(8): Secure DNS zone key config tool
zpool(8): configures ZFS storage pools
Ace::Browser::SiteDefs(3): Access to AceBrowser configuration files
AddressBook::Config(3): AddressBook configuration object
Alien::SDL::ConfigData(3): Configuration for Alien::SDL
Alzabo::Config(3): Alzabo configuration information
Amon2::Config::Simple(3): Default configuration file loader
Apache2::Directive(3): Perl API for manipulating the Apache configuration tree
Apache2::PerlSections(3): write Apache configuration files in Perl
Apache::Admin::Config(3): A module to read/write Apache like configuration files
Apache::ConfigFile(3): Parse an Apache style httpd.conf configuration file
Apache::ConfigParser(3): Load Apache configuration files
Apache::ConfigParser::Directive(3), Apache::ConfigParser::Directive(3): An Apache directive or start context
Apache::SOAP(3): mod_perl-based SOAP server with minimum configuration
Apache::TS::Config::Records(3): Manage the Apache Traffic Server records.config file
Apache::TestConfig(3): -- Test Configuration setup module
Apache::TestRunPHP(3): configure and run a PHP-based test suite
Apache::XMLRPC::Lite(3): mod_perl-based XML-RPC server with minimum configuration
App::Build(3): extends Module::Build to build/install/configure entire applications (i.e. web applications), not just modules and programs
App::CLI::Extension::Component::Config(3): for App::CLI::Extension config module
App::ClusterSSH::Cluster(3): Object representing cluster configuration
App::ClusterSSH::Config(3), ClusterSSH::Config(3): Object representing application configuration
App::GitGot::Command::add(3): add a new repo to your config
App::GitGot::Command::clone(3): clone a remote repo and add it to your config
App::GitGot::Command::remove(3): remove a managed repository from your config
App::Icli::ConfigData(3): Configuration for App::Icli
App::Netdisco::Manual::Configuration(3): How to Configure Netdisco
App::Options(3): Combine command line options, environment vars, and option file values (for program configuration)
App::Sqitch::Command::config(3), Header "Name" App::Sqitch::Command::config(3): Get and set local, user, or system Sqitch options
App::Sqitch::Config(3), Header "Name" App::Sqitch::Config(3): Sqitch configuration management
App::Sqitch::Role::TargetConfigCommand(3), Header "Name" App::Sqitch::Role::TargetConfigCommand(3): A command that handles target-related configuration
AppConfig(3): Perl5 module for reading configuration files and parsing command line arguments
AppConfig::Args(3): Perl5 module for reading command line arguments
AppConfig::CGI(3): Perl5 module for processing CGI script parameters
AppConfig::File(3): Perl5 module for reading configuration files
AppConfig::Getopt(3): Perl5 module for processing command line arguments via delegation to Getopt::Long
AppConfig::State(3): application configuration state
AppConfig::Std(3): subclass of AppConfig that provides standard options
AppConfig::Sys(3): Perl5 module defining platform-specific information and methods for other AppConfig::* modules
Autodia(3), Autodia.pm(3): The configuration and Utility perl module for AutoDia
BIND::Conf_Parser(3): Parser class for BIND configuration files
BIND::Config::Parser(3): Parse BIND Config file
Badger::Class::Config(3): class mixin for configuration
Badger::Config(3): configuration module
Biber::Config(3): Configuration items which need to be saved across the lifetime of a Biber object This class contains a static object and static methods to access configuration and state data. There are several classes of data in here which have separate accessors: * Biber options * Biblatex options * State information used by Biber as it processes entries * displaymode date
Bigtop::Backend::Conf::Gantry(3): makes Config::Gantry conf files
Bigtop::Backend::Conf::General(3): makes Config::General conf files
Bigtop::Docs::AutoBackends(3): lists all backends and their config statements
Bio::Graphics::ConfiguratorI(3): A sectioned map of configuration options (a map of maps), with a default section. Intended to augment existing tag->value semantics (ie. of Bio::AnnotationCollectionI) for object-representation information (eg. foreground color), and for general interface preferences (eg. image width in gbrowse)
Bio::Graphics::RendererI(3): A renderer for the Bio::Graphics class that renders Bio::SeqFeature::CollectionI objects onto Bio::Graphics::Panels using configuration information provided by a Bio::Graphics::ConfiguratorI
Bio::Seq::SeqBuilder(3): Configurable object builder for sequence stream parsers
Bio::Tools::Run::BEDTools::Config(3): Configuration data for bowtie commands
Bio::Tools::Run::BWA::Config(3): Configuration data for BWA commands
Bio::Tools::Run::Bowtie::Config(3): Configuration data for bowtie commands
Bio::Tools::Run::Maq::Config(3): Configuration data for maq commands
Bio::Tools::Run::Samtools::Config(3): configurator for Bio::Tools::Run::Samtools
Brackup::Config(3): configuration parsing/etc
CGI::Application::Plugin::Config::YAML(3): add Config::YAML support to CGI::Application
CGI::Application::Plugin::ConfigAuto(3): Easy config file management for CGI::Application
CGI::Builder::Conf(3): Add user editable configuration files to your WebApp
CGI::Kwiki::Config(3): Config Base Class for CGI::Kwiki
CGI::Kwiki::Config_yaml(3): Simplistic YAML Config Parser for CGI::Kwiki
CPAN::FirstTime(3): Utility for CPAN::Config file Initialization
CPAN::HandleConfig(3): internal configuration handling for CPAN.pm n .SS """CLASS->safe_quote ITEM""" .SS "CLASS->safe_quote ITEM" Subsection "CLASS->safe_quote ITEM" Quotes an item to become safe against spaces in shell interpolation. An item is enclosed in double quotes if: - the item contains spaces in the middle - the item does not start with a quote This happens to avoid shell interpolation problems when whitespace is present in directory names. This method uses commands_quote to determine the correct quote. If commands_quote is a space, no quoting will take place. if it starts and ends with the same quote character: leave it as it is if it contains no whitespace: leave it as it is if it contains whitespace, then if it contains quotes: better leave it as it is else: quote it with the correct quote type for the box we're on
CPAN::Reporter::Config(3): Config file options for CPAN::Reporter
CPAN::Testers::Fact::PerlConfig(3): Perl build and configuration information for a CPAN Testers report
CPAN::Testers::Fact::TestOutput(3): output from configuration, build and test
CPANPLUS::Config(3): configuration defaults and heuristics for CPANPLUS
CPANPLUS::Config::HomeEnv(3): Set the environment for the CPANPLUS base dir
CPANPLUS::Configure(3): configuration for CPANPLUS
CPANPLUS::Internals::Source::Memory(3): In memory implementation n .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" Subsection "$cb->__memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" This method retrieves a storabled tree identified by $name. It takes the following arguments: "name" 4 Item "name" The internal name for the source file to retrieve. "uptodate" 4 Item "uptodate" A flag indicating whether the file-cache is up-to-date or not. "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns a tree on success, false on failure. n .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" Subsection "$cb->__memory_save_source([verbose => BOOL, path => $path])" This method saves all the parsed trees in storabled format if Storable is available. It takes the following arguments: "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns true on success, false on failure
Carp::Datum::Cfg(3): Dynamic Debug Configuration Setting for Datum
Catalyst::Authentication::Realm::SimpleDB(3): A simplified Catalyst authentication configurator
Catalyst::Plugin::Authentication::Store::Htpasswd(3): Authentication database in "$c->config"
Catalyst::Plugin::ConfigLoader(3): Load config files of various types
Catalyst::Plugin::ConfigLoader::Environment(3): Configure your application with environment variables
Catalyst::Plugin::ConfigLoader::Manual(3): Guide to using the ConfigLoader plugin
Catalyst::Plugin::Setenv(3): Allows you to set up the environment from Catalyst's config file
Catalyst::Plugin::SmartURI(3): Configurable URIs for Catalyst
CatalystX::SimpleLogin::Controller::Login(3): Configurable login controller
Cisco::CopyConfig(3): IOS running-config manipulation
Cisco::Reconfig(3): Parse and generate Cisco configuration files
Class::Data::ConfigHash(3): Add Catalyst-Style Config To Your Class
Config(3): access Perl configuration information
Config::Any(3): Load configuration from different file formats, transparently
Config::Any::Base(3): Base class for loaders
Config::Any::General(3): Load Config::General files
Config::Any::INI(3): Load INI config files
Config::Any::JSON(3): Load JSON config files
Config::Any::Perl(3): Load Perl config files
Config::Any::XML(3): Load XML config files
Config::Any::YAML(3): Load YAML config files
Config::ApacheFormat(3): use Apache format config files
Config::Auto(3): Magical config file parser
Config::AutoConf(3): A module to implement some of AutoConf macros in pure perl
Config::Extensions(3): hash lookup of which core extensions were built
Config::Fast(3): extremely fast configuration file parser
Config::General(3): Generic Config Module
Config::General::Extended(3): Extended access to Config files
Config::General::Interpolated(3): Parse variables within Config files
Config::GitLike(3): git-compatible config file parsing
Config::GitLike::Cascaded(3): git-like config file parsing with cascaded inheritance
Config::GitLike::Git(3): load Git configuration files
Config::Grammar(3): A grammar-based, user-friendly config parser
Config::Grammar::Dynamic(3): A grammar-based, user-friendly config parser
Config::INI(3): simple .ini-file format
Config::INI::Reader(3): a subclassable .ini-file parser
Config::INI::Reader::Ordered(3): .ini-file parser that returns sections in order
Config::INI::Simple(3): Simple reading and writing from an INI file--with preserved comments, too!
Config::INI::Writer(3): a subclassable .ini-file emitter
Config::Identity(3): Load (and optionally decrypt via GnuPG) user/pass identity information
Config::IniFiles(3): A module for reading .ini-style configuration files
Config::IniHash(3): Perl extension for reading and writing INI files
Config::IniRegEx(3): Ini workaround, regex search for parameters and sections
Config::JFDI(3): Just * Do it: A Catalyst::Plugin::ConfigLoader-style layer over Config::Any
Config::JSON(3): A JSON based config file system
Config::MVP(3): multivalue-property package-oriented configuration
Config::MVP::Assembler(3): multivalue-property config-loading state machine
Config::MVP::Assembler::WithBundles(3): a role to make assemblers expand bundles
Config::MVP::Error(3): common exceptions class
Config::MVP::Reader(3): object to read config from storage into an assembler
Config::MVP::Reader::Findable(3): a config class that Config::MVP::Reader::Finder can find
Config::MVP::Reader::Findable::ByExtension(3): a Findable Reader that looks for files by extension
Config::MVP::Reader::Finder(3): a reader that finds an appropriate file
Config::MVP::Reader::Hash(3): a reader that tries to cope with a plain old hashref
Config::MVP::Reader::INI(3): an MVP config reader for .ini files
Config::MVP::Section(3): one section of an MVP configuration sequence
Config::MVP::Sequence(3): an ordered set of named configuration sections
Config::Merge(3): load a configuration directory tree containing YAML, JSON, XML, Perl, INI or Config::General files
Config::Merge::Perl(3): Load Perl config files
Config::Model(3): Create tools to validate, migrate and edit configuration files
Config::Model::Annotation(3): Read and write configuration annotations
Config::Model::AnyId(3): Base class for hash or list element
Config::Model::AnyThing(3): Base class for configuration tree item
Config::Model::Backend::Any(3): Virtual class for other backends
Config::Model::Backend::Fstab(3): Read and write config from fstab file
Config::Model::Backend::IniFile(3): Read and write config as a INI file
Config::Model::Backend::Json(3): Read and write config as a JSON data structure
Config::Model::Backend::PlainFile(3): Read and write config as plain file
Config::Model::Backend::ShellVar(3): Read and write config as a "SHELLVAR" data structure
Config::Model::Backend::Yaml(3): Read and write config as a YAML data structure
Config::Model::BackendMgr(3): Load configuration node on demand
Config::Model::CheckList(3): Handle check list element
Config::Model::Cookbook::CreateModelFromDoc(3): Create a configuration model from application documentation
Config::Model::Describe(3): Provide a description of a node element
Config::Model::DumpAsData(3): Dump configuration content as a perl data structure
Config::Model::Dumper(3): Serialize data of config tree
Config::Model::Exception(3): Exception mechanism for configuration model
Config::Model::FuseUI(3): Fuse virtual file interface for Config::Model
Config::Model::HashId(3): Handle hash element for configuration model
Config::Model::IdElementReference(3): Refer to id element(s) and extract keys
Config::Model::Instance(3): Instance of configuration tree
Config::Model::Iterator(3): Iterates forward or backward a configuration tree
Config::Model::ListId(3): Handle list element for configuration model
Config::Model::Lister(3): List available models and applications
Config::Model::Loader(3): Load serialized data into config tree
Config::Model::Manual::ModelCreationAdvanced(3): Creating a model with advanced features
Config::Model::Manual::ModelCreationIntroduction(3): Introduction to model creation with Config::Model
Config::Model::Node(3): Class for configuration tree node
Config::Model::ObjTreeScanner(3): Scan config tree and perform call-backs for each element or node
Config::Model::Report(3): Reports data from config tree
Config::Model::Role::ComputeFunction(3): compute &index or &element functions
Config::Model::Role::Grab(3): Role to grab data from elsewhere in the tree
Config::Model::Role::HelpAsText(3): Transalet element help from pod to text
Config::Model::Role::NodeLoader(3): Load Node element in configuration tree
Config::Model::Role::WarpMaster(3): register and trigger a warped element
Config::Model::SearchElement(3): Search an element in a configuration model
Config::Model::SimpleUI(3): Simple interface for Config::Model
Config::Model::TermUI(3): Interactive command line interface for cme
Config::Model::Tester(3): Test framework for Config::Model
Config::Model::TreeSearcher(3): Search tree for match in value, description
Config::Model::Utils::GenClassPod(3): generate pod documentation from configuration models
Config::Model::Value(3): Strongly typed configuration value
Config::Model::Value::LayeredInclude(3): Include a sub layer configuration
Config::Model::ValueComputer(3): Provides configuration value computation
Config::Model::WarpedNode(3): Node that change config class properties
Config::Model::Warper(3): Warp tree properties
Config::Model::models::Fstab(3): Configuration class Fstab
Config::Model::models::Fstab::FsLine(3): Configuration class Fstab::FsLine
Config::Model::models::Multistrap(3): Configuration class Multistrap
Config::Model::models::Multistrap::Section(3): Configuration class Multistrap::Section
Config::Model::models::PopCon(3): Configuration class PopCon
Config::MySQL(3): Read and write MySQL-style configuration files
Config::MySQL::Reader(3): Read MySQL-style configuration files
Config::MySQL::Writer(3): Write MySQL-style configuration files
Config::Objective(3): Perl module for parsing object-oriented config files
Config::Objective::Boolean(3): boolean data type class for Config::Objective
Config::Objective::DataType(3): base class for Config::Objective data types
Config::Objective::Hash(3): hash data type class for Config::Objective
Config::Objective::Integer(3): integer data type class for Config::Objective
Config::Objective::List(3): list data type class for Config::Objective
Config::Objective::String(3): string data type class for Config::Objective
Config::Objective::Table(3): table data type class for Config::Objective
Config::Options(3): module to provide a configuration hash with option to read from file
Config::Options::Threaded(3): Threaded version of module to provide a configuration hash with option to read from file
Config::Perl::V(3): Structured data retrieval of perl -V output
Config::Properties(3): Read and write property files
Config::Record(3): Configuration file access
Config::Setting(3): Perl extension for configuration files
Config::Setting::Chunk(3): Representation of a configuration file
Config::Setting::FileProvider(3): return the contents of files
Config::Setting::IniParser(3): parse windows .ini style files
Config::Setting::XMLParser(3): parse XML settings file
Config::Simple(3): simple configuration file class
Config::Std(3): Load and save configuration files in a standard format
Config::Tiny(3): Read/Write .ini style files with as little code as possible
Config::Validator(3): schema based configuration validation
Config::Versioned(3): Simple, versioned access to configuration data
Config::Wrest(3): Read and write Configuration data With References, Environment variables, Sections, and Templating
Config::YAML(3): Simple configuration automation
ConfigReader::Simple(3): A simple line-oriented configuration file parser
Crypt::Random::TESHA2::Config(3): Configuration data
DBD::mysql::INSTALL(3): How to install and configure DBD::mysql
DBIWrapper::XMLParser(3), XMLParser(3): The XML Configuration Parser Module
DBIx::Class::Helper::Row::OnColumnMissing(3): Configurably handle access of missing columns
DBIx::Class::Schema::Config(3): Credential Management for DBIx::Class
DBIx::Class::Storage::BlockRunner(3): Try running a block of code until success with a configurable retry logic
DJabberd::Config(3): Configuration options in djabberd.conf
DNSCheck::Config(3): Read config files and make their contents available to other modules
Dancer2::Config(3): Configure Dancer2 to suit your needs
Dancer2::Core::Role::ConfigReader(3): Config role for Dancer2 core objects
Dancer2::Plugin::Auth::Extensible::Provider::Config(3): example auth provider using app config
Dancer::Config(3): how to configure Dancer to suit your needs
Dancer::Config::Object(3): Access the config via methods instead of hashrefs
Dancer::Plugin::Auth::Extensible::Provider::Config(3), Dancer::Plugin::Auth::Extensible::Config(3): example auth provider using app config
Dancer::Plugin::RPC(3): Configure endpoints for XMLRPC and JSONRPC procedures
Dancer::RPCPlugin::DispatchFromConfig(3): Build dispatch-table from the Dancer Config
Data::Localize::Trait::WithStorage(3): Localizer With Configurable Storage
Data::Serializer::Config::General(3): Creates bridge between Data::Serializer and Config::General
Data::Serializer::Config::Wrest(3): Creates bridge between Data::Serializer and Config::Wrest
Date::Manip::Config(3): Date::Manip configuration
Date::Manip::ConfigFile(3): sample config file
Device::USB::DevConfig(3): Access the device configuration returned by libusb
Dist::Zilla::App::Command::setup(3): set up a basic global config file
Dist::Zilla::MVP::Assembler(3): Dist::Zilla-specific subclass of Config::MVP::Assembler
Dist::Zilla::MVP::Assembler::GlobalConfig(3): Dist::Zilla::MVP::Assembler for global configuration
Dist::Zilla::MVP::RootSection(3): a standard section in Dist::Zilla's configuration sequence
Dist::Zilla::MVP::Section(3): a standard section in Dist::Zilla's configuration sequence
Dist::Zilla::Plugin::GenerateFile(3): build a custom file from only the plugin configuration
Dist::Zilla::Plugin::MetaConfig(3): summarize Dist::Zilla configuration into distmeta
Dist::Zilla::PluginBundle::Classic(3): the classic (old) default configuration for Dist::Zilla
Dist::Zilla::Role::ConfigDumper(3): something that can dump its (public, simplified) configuration
DocSet::Config(3), "DocSet::Config"(3): A superclass that handles object's configuration and data
DocSet::RunTime(3), "DocSet::RunTime"(3): RunTime Configuration
Emplacken(3): Manage multiple plack apps with a directory of config files
Encode::Config(3): -- internally used by Encode
ExtUtils::CChecker(3), "ExtUtils::CChecker"(3): configure-time utilities for using C headers, libraries, or OS features
ExtUtils::Config(3): A wrapper for perl's configuration
ExtUtils::MakeMaker::Config(3): Wrapper around Config.pm
ExtUtils::PkgConfig(3): simplistic interface to pkg-config
File::ChangeNotify::ConfigData(3): Configuration for File::ChangeNotify
File::ConfigDir(3): Get directories of configuration files
GRNOC::Config(3): The GRNOC Default Config parser
Gantry::Conf(3): Gantry's Flexible Configuration System
Gantry::Conf::FAQ(3): Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ script.pl --instance=app1-dev instead of: $ script.pl --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
Gantry::Conf::Provider::FlatFile::Config::General(3): -- Uses Config::General to configure your Gantry application
Gantry::Conf::Provider::FlatFile::Config::Tiny(3): -- Uses Config::Tiny to configure your Gantry application
Gantry::Conf::Provider::HTTP::Config::General(3): -- Uses Config::General to configure your Gantry application
Gantry::Conf::Provider::ParamBuilder(3): Configure via ModPerl::ParamBuilder
Gantry::Conf::Provider::PerlSetVar(3): Configure via PerlSetVar's in httpd.conf
Gantry::Conf::Provider::SQL::PostgreSQL(3): -- Store your configuration in a PostgreSQL database
Gnome2::GConf(3): Perl wrappers for the GConf configuration engine
Gnome2::GConf::ChangeSet(3): A set of configuration changes to be made
Gnome2::GConf::Engine(3): A Configuration Engine
Goo::ConfigFile(3): Parse and load .goo files. Based loosely on .ini files
Goo::Thing::conf::ConfigProfiler(3): Profile a config file
Goo::Thing::goo::Maker(3): Make a new Thing by creating a .goo configuration file
GraphViz2::Config(3): A wrapper for AT&T's Graphviz
Gungho::Manual::FAQ(3): Gungho FAQ n .SH "Q. ""Why Did You Call It Gungho""?" .SH "Q. ``Why Did You Call It Gungho''?" Header "Q. Why Did You Call It Gungho?" It rhymes with Xango, which is its predecessor. n .SH "Q. ""I don't understand the notation of the config""" .SH "Q. ``I don't understand the notation of the config''" Header "Q. I don't understand the notation of the config" To make the notation concise, we use a notation like engine.module = POE. Each level is a key in the hash, so the previous example translates to a config like my $config = { engine => { module => "POE" } } Or, in YAML: engine: module: POE n .SH "Q. ""My requests are being served slow. What can I do?""" .SH "Q. ``My requests are being served slow. What can I do?''" Header "Q. My requests are being served slow. What can I do?" There are actually a number of things that may affect fetch speed
HTML::FormHandler::Foo(3): Experiment in loading form from config file
HTML::Mason::Params(3): Mason configuration parameters
HTTP::Config(3): Configuration for request and response objects
HTTP::ProxyPAC(3): use a PAC (Proxy Auto Config) file to get proxy info
IO::Interface(3): Perl extension for access to network card configuration information
IO::Interface::Simple(3): Perl extension for access to network card configuration information
IOC::Config::XML(3): An XML Config reader for IOC
IOC::Config::XML::SAX::Handler(3): An XML::SAX handler to read IOC Config files
JMX::Jmx4Perl::Config(3): Configuration file support for Jmx4Perl
JMX::Jmx4Perl::Nagios::SingleCheck(3): A single nagios check This is an package used internally by JMX::Jmx4Perl::Nagios::CheckJmx4Perl. It encapsulates the configuration for single checks, which can be combined to a bulk JMX-Request so only a single server turnaround is used to obtain multiple checks results at once
Jifty::Config(3): the configuration handler for Jifty
Jifty::Plugin::Config::Action::AddConfig(3): add a configuration entry
Jifty::Plugin::Config::Action::Config(3): Register config
Jifty::Plugin::Config::Dispatcher(3): dispatcher of the Config plugin
Jifty::Plugin::Config::View(3): Templates for Config plugin
LaTeXML::Common::Config(3), "LaTeXML::Common::Config"(3): Configuration logic for LaTeXML
Locale::Po4a::KernelHelp(3pm): convert kernel configuration help from/to PO files
Log::Dispatch::Config(3): Log4j for Perl
Log::Dispatch::Configurator(3): Abstract Configurator class
Log::Dispatch::Configurator::Any(3): Configurator implementation with Config::Any
Log::Dispatch::Configurator::AppConfig(3): Configurator implementation with AppConfig
Log::Dispatch::Configurator::YAML(3): Configurator implementation with YAML
Log::Handler::Config(3): The main config loader
Log::Handler::Plugin::Config::General(3): Config loader for Config::General
Log::Handler::Plugin::Config::Properties(3): Config loader for Config::Properties
Log::Handler::Plugin::YAML(3): Config loader for YAML
Log::Log4perl::Config(3): Log4perl configuration file syntax
Log::Log4perl::Config::BaseConfigurator(3): Configurator Base Class
Log::Log4perl::Config::DOMConfigurator(3): reads xml config files
Log::Log4perl::Config::PropertyConfigurator(3): reads properties file
Log::Log4perl::Config::Watch(3): Detect file changes
Log::Log4perl::EasyCatch(3): Easy Logging with Log4perl, catching errors and warnings, using configfile
Log::Message::Config(3): Configuration options for Log::Message
Luka::Conf(3): Configuration file interface class
MP3::Archive::Config(3): Configuration handling for MP3::Archive
Mail::SpamAssassin::Conf(3): SpamAssassin configuration file
Mail::SpamAssassin::Conf::Parser(3): parse SpamAssassin configuration
Maypole::Config(3): Maypole Configuration Class
ModPerl::Config(3): Functions to retrieve mod_perl specific env information
Module::Build::ConfigData(3): Configuration for Module::Build
Module::Build::Notes(3): Create persistent distribution configuration modules
MojoMojo::Prefs(3): info on MojoMojo configurable preferences MojoMojo has a number of preferences that can be set in "Site settings" ("/.admin"). If values are not set in the database, they are read from mojomojo.conf, or default values are used
Mojolicious::Plugin::Config(3): Perl-ish configuration plugin
Mojolicious::Plugin::JSONConfig(3): JSON configuration plugin
Mojolicious::Plugin::YamlConfig(3): YAML Configuration Plugin
Monitor::Simple::Config(3): See documentation in Monitor::Simple
Monitoring::Plugin::Config(3): read nagios plugin .ini style config files
MooX::Cmd::Role::ConfigFromFile(3): MooX::ConfigFromFile support role for MooX::Cmd
MooX::ConfigFromFile(3): Moo eXtension for initializing objects from config file
MooX::ConfigFromFile::Role(3): Moo eXtension for initializing objects from config file
MooX::ConfigFromFile::Role::HashMergeLoaded(3): allows better merge strategies for multiple config files
MooX::File::ConfigDir(3): Moo eXtension for File::ConfigDir
MooseX::App::Plugin::Config(3): Config files your MooseX::App applications
MooseX::App::Plugin::ConfigHome(3): Config files in users home directory
MooseX::ConfigFromFile(3): An abstract Moose role for setting attributes from a configfile
MooseX::SimpleConfig(3): A Moose role for setting attributes from a simple configuration file
MouseX::ConfigFromFile(3): An abstract Mouse role for setting attributes from a configfile
Nagios::Config(3): Parser for the Nagios::Object set of perl modules
Nagios::Config::File(3): Base class for Nagios configuration files
Nagios::Object::Config(3): Perl objects to represent Nagios configuration
Nagios::Plugin::Config(3): read nagios plugin .ini style config files
Net::ACL::File(3): Access-lists constructed from configuration file like syntax
Net::ACL::File::ASPath(3): AS-path access-lists loaded from configuration string
Net::ACL::File::Community(3): Community-lists loaded from configuration string
Net::ACL::File::IPAccess(3): IP access-lists loaded from configuration string
Net::ACL::File::IPAccessExt(3): Extended IP access-lists loaded from configuration string
Net::ACL::File::Prefix(3): Prefix-lists loaded from configuration string
Net::ACL::File::RouteMap(3): BGP Route-Maps loaded from configuration string
Net::ACL::File::Standard(3): Standard access-lists loaded from configuration string
Net::BitTorrent::ConfigData(3): Configuration for Net::BitTorrent
Net::Config(3): Local configuration data for libnet
Net::DNS::Check::Test::ns_count(3): Check if the number of NS RR are within the range set in the configuration object
Net::DNS::Check::Test::soa_expire_range(3): Check if the expire time in the SOA RR is within the range set in the configuration object
Net::DNS::Check::Test::soa_refresh_range(3): Check if the refresh time in the SOA RR is within the range set in the configuration object
Net::DNS::Check::Test::soa_retry_range(3): Check if the retry time in the SOA RR is within the range set in the configuration object
Net::DNS::TestNS::DTD(3): DTD for the TestNS configurationf file
Net::Delicious::Config(3): config handler for Net::Delicious
Net::Delicious::Constants::Config(3): constant variables for Net::Delicious default configs
Net::FTPServer(3): A secure, extensible and configurable Perl FTP server
Net::Ifconfig::Wrapper(3): provides a unified way to configure network interfaces on FreeBSD, OpenBSD, Solaris, Linux, OS X, and WinNT (from Win2K)
Net::LDAP::Config(3): a simple wrapper for maintaining info related to LDAP connections
Net::NSCA::Client::ServerConfig(3): Specify configuration data for the remote NSCA server
Net::SSH::Perl::Config(3): Load and manage SSH configuration
Net::Whois::Raw::Data(3): Config for Net::Whois::Raw
Net::YASA::ConfigData(3): Configuration for Net::YASA
OpenXPKI::Config(3): Connector based configuration layer using Config::Versioned
OpenXPKI::Config(3): Simplified access to the configuration data
OpenXPKI::Config::Backend(3): Backend connector holding the system config
OpenXPKI::Crypto::Backend::OpenSSL::Config(3), Header(3): "Name" OpenXPKI::Crypto::Backend::OpenSSL::Config
OpenXPKI::Server::Workflow::Activity::Reports::CertExport::GetConfig(3), Header(3): "Name" OpenXPKI::Server::Workflow::Activity::Reports::CertExport::GetConfig
OpenXPKI::Server::Workflow::Condition::KeyGenerationMode(3): Check if the profile allows key generation as specified by the "generate" parameter. Example: can_use_server_key: class: OpenXPKI::Server::Workflow::Condition::KeyGenerationMode param: generate: server _map_profile: $cert_profile Returns true if the key generation setting is either escrow, server or both. The setting is obtained for the given profile (by profile or from the default setting) from the node key.generate. If this node is missing, client is allowed and server is assumed ok if key.alg is not empty. If the profile parameter is not given in the configuration, the context value of cert_profile is used
Padre::Config(3): Configuration subsystem for Padre
Padre::Config::Apply(3): Implements on-the-fly configuration changes
Padre::Config::Host(3): Padre configuration storing host state data
Padre::Config::Human(3): Padre configuration for personal preferences
Padre::Constant(3): constants used by configuration subsystems
Padre::DB::HostConfig(3): Padre::DB class for the host_config table
Padre::Feature(3): Constants to support currying of feature_* config options
Padre::Startup(3): Padre start-up related configuration settings
Padre::Sync(3): Utility functions for handling remote Configuration Syncing
Padre::Wx::Dialog::Advanced(3): a dialog to show and configure advanced preferences
Padre::Wx::Role::Config(3): Role for Wx forms that control preference data
Parse::PerlConfig(3): parse a configuration file written in Perl
Parse::PlainConfig(3): Parser for plain-text configuration files
Path::IsDev::NegativeHeuristic::PerlINC(3): White-list paths in Config.pm as being non-development roots
Paws::AutoScaling::CreateLaunchConfiguration(3): Arguments for method CreateLaunchConfiguration on Paws::AutoScaling
Paws::AutoScaling::DeleteLaunchConfiguration(3): Arguments for method DeleteLaunchConfiguration on Paws::AutoScaling
Paws::AutoScaling::DeleteNotificationConfiguration(3): Arguments for method DeleteNotificationConfiguration on Paws::AutoScaling
Paws::AutoScaling::DescribeLaunchConfigurations(3): Arguments for method DescribeLaunchConfigurations on Paws::AutoScaling
Paws::AutoScaling::DescribeNotificationConfigurations(3): Arguments for method DescribeNotificationConfigurations on Paws::AutoScaling
Paws::AutoScaling::PutNotificationConfiguration(3): Arguments for method PutNotificationConfiguration on Paws::AutoScaling
Paws::CloudFront::GetCloudFrontOriginAccessIdentityConfigResult(3), Paws::CloudFront::(3): Arguments for method on Paws::CloudFront
Paws::CloudFront::GetDistributionConfigResult(3), Paws::CloudFront::(3): Arguments for method on Paws::CloudFront
Paws::CloudFront::GetStreamingDistributionConfigResult(3), Paws::CloudFront::(3): Arguments for method on Paws::CloudFront
Paws::CloudHSM::GetConfig(3): Arguments for method GetConfig on Paws::CloudHSM
Paws::CodeDeploy::CreateDeploymentConfig(3): Arguments for method CreateDeploymentConfig on Paws::CodeDeploy
Paws::CodeDeploy::DeleteDeploymentConfig(3): Arguments for method DeleteDeploymentConfig on Paws::CodeDeploy
Paws::CodeDeploy::GetDeploymentConfig(3): Arguments for method GetDeploymentConfig on Paws::CodeDeploy
Paws::CodeDeploy::ListDeploymentConfigs(3): Arguments for method ListDeploymentConfigs on Paws::CodeDeploy
Paws::CognitoSync::GetIdentityPoolConfiguration(3): Arguments for method GetIdentityPoolConfiguration on Paws::CognitoSync
Paws::CognitoSync::SetIdentityPoolConfiguration(3): Arguments for method SetIdentityPoolConfiguration on Paws::CognitoSync
Paws::Config(3): Perl Interface to AWS AWS Config
Paws::Config::DeleteDeliveryChannel(3): Arguments for method DeleteDeliveryChannel on Paws::Config
Paws::Config::DeliverConfigSnapshot(3): Arguments for method DeliverConfigSnapshot on Paws::Config
Paws::Config::DescribeConfigurationRecorderStatus(3): Arguments for method DescribeConfigurationRecorderStatus on Paws::Config
Paws::Config::DescribeConfigurationRecorders(3): Arguments for method DescribeConfigurationRecorders on Paws::Config
Paws::Config::DescribeDeliveryChannelStatus(3): Arguments for method DescribeDeliveryChannelStatus on Paws::Config
Paws::Config::DescribeDeliveryChannels(3): Arguments for method DescribeDeliveryChannels on Paws::Config
Paws::Config::GetResourceConfigHistory(3): Arguments for method GetResourceConfigHistory on Paws::Config
Paws::Config::PutConfigurationRecorder(3): Arguments for method PutConfigurationRecorder on Paws::Config
Paws::Config::PutDeliveryChannel(3): Arguments for method PutDeliveryChannel on Paws::Config
Paws::Config::StartConfigurationRecorder(3): Arguments for method StartConfigurationRecorder on Paws::Config
Paws::Config::StopConfigurationRecorder(3): Arguments for method StopConfigurationRecorder on Paws::Config
Paws::ELB::ConfigureHealthCheck(3): Arguments for method ConfigureHealthCheck on Paws::ELB
Paws::ElasticBeanstalk::CreateConfigurationTemplate(3): Arguments for method CreateConfigurationTemplate on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::DeleteConfigurationTemplate(3): Arguments for method DeleteConfigurationTemplate on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::DeleteEnvironmentConfiguration(3): Arguments for method DeleteEnvironmentConfiguration on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::DescribeConfigurationOptions(3): Arguments for method DescribeConfigurationOptions on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::DescribeConfigurationSettings(3): Arguments for method DescribeConfigurationSettings on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::UpdateConfigurationTemplate(3): Arguments for method UpdateConfigurationTemplate on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::ValidateConfigurationSettings(3): Arguments for method ValidateConfigurationSettings on Paws::ElasticBeanstalk
Paws::Lambda::GetFunctionConfiguration(3): Arguments for method GetFunctionConfiguration on Paws::Lambda
Paws::Lambda::UpdateFunctionConfiguration(3): Arguments for method UpdateFunctionConfiguration on Paws::Lambda
Paws::RedShift::CreateHsmConfiguration(3): Arguments for method CreateHsmConfiguration on Paws::RedShift
Paws::RedShift::DeleteHsmConfiguration(3): Arguments for method DeleteHsmConfiguration on Paws::RedShift
Paws::RedShift::DescribeHsmConfigurations(3): Arguments for method DescribeHsmConfigurations on Paws::RedShift
Paws::S3::NotificationConfiguration(3), Paws::S3::(3): Arguments for method on Paws::S3
Paws::S3::NotificationConfigurationDeprecated(3), Paws::S3::(3): Arguments for method on Paws::S3
Perl::Critic::Config(3): The final derived Perl::Critic configuration, combined from any profile file and command-line parameters
Perl::Critic::Exception::AggregateConfiguration(3): A collection of a set of problems found in the configuration and/or command-line options
Perl::Critic::Exception::Configuration(3): A problem with Perl::Critic configuration
Perl::Critic::Exception::Configuration::Generic(3): A problem with Perl::Critic configuration that doesn't involve an option
Perl::Critic::Exception::Configuration::NonExistentPolicy(3): The configuration referred to a non-existent policy
Perl::Critic::Exception::Configuration::Option(3): A problem with an option in the Perl::Critic configuration
Perl::Critic::Exception::Configuration::Option::Global(3): A problem with Perl::Critic global configuration
Perl::Critic::Exception::Configuration::Option::Global::ExtraParameter(3): The configuration referred to a non-existent global option
Perl::Critic::Exception::Configuration::Option::Global::ParameterValue(3): A problem with the value of a global parameter
Perl::Critic::Exception::Configuration::Option::Policy(3): A problem with configuration of a policy
Perl::Critic::Exception::Configuration::Option::Policy::ExtraParameter(3): The configuration referred to a non-existent parameter for a policy
Perl::Critic::Exception::Configuration::Option::Policy::ParameterValue(3): A problem with the value of a parameter for a policy
Perl::Critic::OptionsProcessor(3): The global configuration default values, combined with command-line values
Perl::Critic::PolicyConfig(3): Configuration data for a Policy
Perlanet::Trait::YAMLConfig(3): configure Perlanet through a YAML configuration file
Perlbal::Manual::Configuration(3): How to configure Perlbal
Perlbal::Manual::ReverseProxy(3): Configuring Perlbal as a Reverse Proxy
Perlbal::Manual::Selector(3): Configuring Perlbal as a virtual service that maps onto other services
Perlbal::Manual::WebServer(3): Configuring Perlbal as a Web Server
Perlbal::Plugin::Include(3): Allows multiple, nesting configuration files
PkgConfig(3): Pure-Perl Core-Only replacement for pkg-config
Plack::Middleware::Debug::PerlConfig(3): Debug panel for Perl configuration information
Plack::Middleware::Log4perl(3): Uses Log::Log4perl to configure logger
Plack::Middleware::LogDispatch(3): Uses Log::Dispatch to configure logger
Plagger::Plugin::CustomFeed::Debug(3): Feed in config.yaml
Plagger::Plugin::Subscription::Config(3): Subscription in config.yaml
Plagger::Plugin::Subscription::PlanetINI(3): read subscriptions from Planet Planet's config.ini
Plagger::Plugin::Widget::Simple(3): Simple widget creation using config
Prima::VB::CfgMaint(3): maintains visual builder widget palette configuration
Prophet::Config(3): Prophet's configuration object
Qpsmtpd::ConfigServer(3): a configuration server for qpsmtpd
RPC::ExtDirect::Config(3): Centralized configuration handling for RPC::ExtDirect
Reply::Config(3): config loading for Reply
Rex::CMDB(3): Function to access the CMDB (configuration management database)
Rex::Commands::PkgConf(3): Configure packages
Rex::Config(3): Handles the configuration
SDL::ConfigData(3): Configuration for SDL
SNMP::Info::CiscoConfig(3): SNMP Interface to Cisco Configuration Files
SQL::Dialects::Google(3): SQL::Dialects::Google -- Google config file for SQL::Parser
SVK::Command::Depotmap(3): Create or edit the depot mapping configuration
SVN::Hooks::UpdateConfFile(3): Maintain the repository configuration versioned
SVN::Notify::Config(3): Config-driven Subversion notification
SVN::Notify::Mirror::ConfigData(3): Configuration for SVN::Notify::Mirror
SVN::Notify::Snapshot::ConfigData(3): Configuration for SVN::Notify::Snapshot
SVN::S4::Config(3): Get subversion config values
Samba::LDAP::Config(3): Config file related tasks for Samba::LDAP
Servlet::Config(3): configuration super interface
Servlet::FilterConfig(3): filter configuration interface
Servlet::ServletConfig(3): servlet configuration interface
ShipIt::Conf(3): -- holds/parses config info for a project
Solr::Schema(3): Reads user defined fields from solr config file schema.xml
Sphinx::Config(3): Sphinx search engine configuration file read/modify/write
Spoon::Config(3): Spoon Configuration Base Class
Spork::Config(3): Spork Configuration Class
Syntax::Highlight::Engine::Kate::Apache_Configuration(3): a Plugin for Apache Configuration syntax highlighting
Syntax::Highlight::Engine::Kate::WINE_Config(3): a Plugin for WINE Config syntax highlighting
Syntax::Highlight::Engine::Kate::Xorg_Configuration(3): a Plugin for x.org Configuration syntax highlighting
Template::Config(3): Factory module for instantiating other TT2 modules
Template::Manual::Config(3): Configuration options
Test::LectroTest::TestRunner(3): Configurable TAP-compatible engine for running LectroTest property checks
Text::Diff::Config(3): global configuration for Text::Diff (as a separate module)
Tk::ConfigSpecs(3): Defining behaviour of 'configure' for composite widgets
Tk::FileDialog(3): A highly configurable File Dialog widget for Perl/Tk
Tk::Getopt(3): User configuration window for Tk with interface to Getopt::Long
Toader::Config(3): Represents the Toader config
Toadfarm::Manual::Config(3): Config format for Toadfarm apps
Ubic::Admin::Setup(3): this module handles ubic setup: asks user some questions and configures your system
Ubic::Multiservice::Dir(3): multiservice which uses directory with configs to instantiate services
Ubic::Multiservice::Simple(3): simplest multiservice, configured in constructor
Ubic::ServiceLoader::Ext::ini(3): loader for ini-style configs
Ubic::ServiceLoader::Ext::json(3): loader for json-style configs
Ubic::Settings::ConfigFile(3): single ubic config file
Unix::ConfigFile(3): Perl interface to various Unix configuration files
Unix::Statgrab::ConfigData(3): Configuration for Unix::Statgrab
VCP::ConfigFileUtils(3): utilities used to parse or create vcp config files
VM::EC2::LaunchConfiguration(3): Object describing a Launch Configuration
VM::EC2::ReservedInstance::Modification::Configuration(3): Object describing an Amazon EC2 reserved instance listing modification result configuration
W3C::LogValidator::Config(3): [W3C Log Validator] Configuration parser
WWW::Robot(3): configurable web traversal engine (for web robots & agents)
WWW::YoutubeViewer::ConfigData(3): Configuration for WWW::YoutubeViewer
WWWdb::ConfigFile(3): ConfigFiles for WWWdb
WWWdb::ConfigPool(3): ConfigPools for WWWdb
Web::Scraper::Config(3): Run Web::Scraper From Config Files
WebDAO::Config(3): Configuration file class
Workflow::Config(3): Parse configuration files for the workflow components
Workflow::Config::Perl(3): Parse workflow configurations as Perl data structures
Workflow::Config::XML(3): Parse workflow configurations from XML content
XML::SAX::Machines::ConfigHelper(3): lib/XML/SAX/Machines/ConfigHelper.pm
XMLTV::Configure(3): Configuration file handling for XMLTV grabbers
XMLTV::Configure::Writer(3): Configuration file writer for XMLTV grabbers
XTerm::Conf(3): change configuration of a running xterm
YAML::AppConfig(3): Manage configuration files with YAML and variable references
ZConf(3): A configuration system allowing for either file or LDAP backed storage
ZConf::backends::file(3): A configuration system allowing for either file or LDAP backed storage
ZoneMinder::Config(3): ZoneMinder configuration module
ZoneMinder::ConfigData(3): ZoneMinder Configuration Data module
adasockets-config(1): script to get information about the installed AdaSockets library
anyconfig_cli(1): manual page for anyconfig_cli 0.0.3.11
brlcad-config(1): script to get information about the installed version of BRL-CAD
catfish(1): File searching tool which is configurable via the command line
ccconfig(1): Get Convert::Binary::C configuration for a compiler


cliapp(5): config file and option conventions for Python command line framework
config(4): Configuration file
config_prog(1): -- Configure Interchange programs with MakeMaker variables
config_status_demo.pl(1): demonstrate using Nagios::Config and Nagios::StatusLog together
configdump(1): Interchange configuration dumper
csa_query_configuration(3): Determine information about the installed CSA configuration


dtconfig(1): desktop configuration utility
dtfile_config(4): CDE File Manager configuration file
dtfpfile(4): format and locations of front panel configuration files
dtsrdbrec(1): Produce DtSearch database configuration and status report
erts_alloc_config(3): Configuration tool for erts_alloc
euca2ools.ini(5): configuration for euca2ools
eulb-configure-healthcheck(1): Configure health checking for instance registerd with a load balancer
euscale-create-launch-config(1): Create a new auto-scaling instance launch configuration
euscale-delete-launch-config(1): Delete an auto-scaling instance launch configuration
euscale-delete-notification-configuration(1): Delete an auto-scaling group's notification configuration
euscale-describe-launch-configs(1): Describe auto-scaling instance launch configurations
euscale-describe-notification-configurations(1): Describe notification actions associated with auto-scaling groups
euscale-put-notification-configuration(1): Create or replace an auto-scaling group's notification configuration
fish_config(1): -- start the web-based configuration interface
flickr_dump_stored_config.pl(1): script to display contents of a Flickr::API storable configuration file
flickr_make_stored_config.pl(1): script to assist with testing and using the Flickr::API
g.mkfontcap(1), g.mkfontcap (1): Generates the font configuration file by scanning various directories for fonts
gnustep-config(1): prints information about the current gnustep installation
html_formfu_dumpconf.pl(1): dump configuration files
httpd_conf(3): Configuration utility functions to be used by the Erlang Web server API programmer
inc::Module::Install(3): Module::Install configuration system
jinfo(1): Generates configuration information. This command is experimental and unsupported


knife-configure(1): The man page for the knife configure subcommand. rst2man-indent-level 0 1 rstReportMargin \$1






















l4p-tmpl(1), l4p-tmpl(1): Print out a Log4perl template configuration
libnetcfg(1): configure libnet
netdisco-rancid-export(1): Generate RANCID Group Configuration
npm-config(1): Manage the npm configuration files
npm-config(3): Manage the npm configuration files
npm-config(7): More than you probably want to know about npm configuration
npm-load(3): Load config settings
npmrc(5): The npm config files

parse_test(1), boottool(1): tool for modifying bootloader configuration
pkg-config.pl(1), PkgConfig(1): Pure-Perl Core-Only replacement for pkg-config
po4a-build.conf(5): configuration file for building translated content
ppkg-config(1), PkgConfig(1): Pure-Perl Core-Only replacement for pkg-config
prima-cfgmaint(1), cfgmaint(1): configuration tool for Visual Builder
pshconfig(1): Configuring the Perl Shell
pt-config-diff(1): Diff MySQL configuration files and server variables
razor-agent.conf(5), "razor-agent.conf"(5): Configuration file for Razor Agents
rschedule(1): User interface for Perl Schedule::Load configuration and status
snmpa_conf(3): Utility functions for handling the agent config files
snmpm_conf(3): Utility functions for handling the manager config files
snortconfig(1): a simple yet complicated rules maintance system
sqitch-config(3), Header "Name" sqitch-config(3): Get and set local, user, or system Sqitch options
sqitch-config-usage(3), Header "Name" sqitch-config-usage(3): Sqitch config usage statement
sqitch-configuration(3), Header "Name" sqitch-configuration(3): Hierarchical engine and target configuration
sqitch-engine(3), Header "Name" sqitch-engine(3): Manage database engine configuration
sqitch-target(3), Header "Name" sqitch-target(3): Manage target database configuration
supybot-wizard(1): A wizard for creating Supybot configuration files
test_configuration.pl(1): Load your configuration to verify Nagios::Object is compatible with it. -c: path to your main configuration file -l: "relaxed" mode - allow unrecognized attributes on objects, default is strict
vhostcname(1): synchronize DNS with Apache virtual host configuration
xpdfrc(5): configuration file for Xpdf tools (version 3.04)
xterm-conf(1): change configuration of a running xterm

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages