FreeBSD Manual Pages

home | help

__iconv_get_list(3), __iconv_free_list(3): retrieving a list of character encodings supported by iconv(3)
add_wch(3), wadd_wch(3), mvadd_wch(3), mvwadd_wch(3), echo_wchar(3), wecho_wchar(3): add a complex character and rendition to a curses window, then advance the cursor
add_wchstr(3), add_wchnstr(3), wadd_wchstr(3), wadd_wchnstr(3), mvadd_wchstr(3), mvadd_wchnstr(3), mvwadd_wchstr(3), mvwadd_wchnstr(3): add an array of complex characters (and attributes) to a curses window
addch(3), waddch(3), mvaddch(3), mvwaddch(3), echochar(3), wechochar(3): add a character (with attributes) to a curses window, then advance the cursor
addchstr(3), addchnstr(3), waddchstr(3), waddchnstr(3), mvaddchstr(3), mvaddchnstr(3), mvwaddchstr(3), mvwaddchnstr(3): add a string of characters (and attributes) to a curses window
addstr(3), addnstr(3), waddstr(3), waddnstr(3), mvaddstr(3), mvaddnstr(3), mvwaddstr(3), mvwaddnstr(3): add a string of characters to a curses window and advance cursor
addwstr(3), addnwstr(3), waddwstr(3), waddnwstr(3), mvaddwstr(3), mvaddnwstr(3), mvwaddwstr(3), mvwaddnwstr(3): add a string of wide characters to a curses window and advance cursor
asa(1): interpret carriage-control characters
ascii(7): octal, hexadecimal, decimal and binary ASCII character sets
attr_get(3), wattr_get(3), attr_set(3), wattr_set(3), attr_off(3), wattr_off(3), attr_on(3), wattr_on(3), attroff(3), wattroff(3), attron(3), wattron(3), attrset(3), wattrset(3), chgat(3), wchgat(3), mvchgat(3), mvwchgat(3), color_set(3), wcolor_set(3), standend(3), wstandend(3), standout(3), wstandout(3): curses character and window attribute control routines
border_set(3), wborder_set(3), box_set(3), hline_set(3), whline_set(3), mvhline_set(3), mvwhline_set(3), vline_set(3), wvline_set(3), mvvline_set(3), mvwvline_set(3): create curses borders or lines using complex characters and renditions
btowc(3), wctob(3): convert between wide and single-byte characters
cuse(3), libcuse(3): Userland character device library
delch(3), wdelch(3), mvdelch(3), mvwdelch(3): delete character under the cursor in a curses window
devtoname(9): converts character device into a string indicating the device name
digittoint(3): convert a numeric character to its integer value
digittoint(3), isalnum(3), isalpha(3), isascii(3), isblank(3), iscntrl(3), isdigit(3), isgraph(3), ishexnumber(3), isideogram(3), islower(3), isnumber(3), isphonogram(3), isprint(3), ispunct(3), isrune(3), isspace(3), isspecial(3), isupper(3), isxdigit(3), toascii(3), tolower(3), toupper(3): character classification functions
digittoint_l(3), isalnum_l(3), isalpha_l(3), isascii_l(3), isblank_l(3), iscntrl_l(3), isdigit_l(3), isgraph_l(3), ishexnumber_l(3), isideogram_l(3), islower_l(3), isnumber_l(3), isphonogram_l(3), isprint_l(3), ispunct_l(3), isrune_l(3), isspace_l(3), isspecial_l(3), isupper_l(3), isxdigit_l(3), tolower_l(3), toupper_l(3): character classification functions
dynamic_field_info(3), field_info(3): retrieve field characteristics
euc(5): EUC encoding of wide characters
fgetc(3), getc(3), getc_unlocked(3), getchar(3), getchar_unlocked(3), getw(3): get next character or word from input stream
fgetwc(3), getwc(3), getwchar(3): get next wide character from input stream
fgetwln(3): get a line of wide characters from a stream
fgetws(3): get a line of wide characters from a stream
fputc(3), fputc_unlocked(3), putc(3), putc_unlocked(3), putchar(3), putchar_unlocked(3), putw(3): output a character or word to a stream
fputwc(3), putwc(3), putwchar(3): output a wide character to a stream
fputws(3): output a line of wide characters to a stream
get_wch(3), wget_wch(3), mvget_wch(3), mvwget_wch(3), unget_wch(3): get (or push back) a wide character from curses terminal keyboard
get_wstr(3), getn_wstr(3), wget_wstr(3), wgetn_wstr(3), mvget_wstr(3), mvgetn_wstr(3), mvwget_wstr(3), mvwgetn_wstr(3): get an array of wide characters from a curses terminal keyboard
getcchar(3), setcchar(3): Get a wide character string and rendition from a cchar_t or set a cchar_t from a wide-character string
getch(3), wgetch(3), mvgetch(3), mvwgetch(3), ungetch(3), has_key(3): get (or push back) characters from curses terminal keyboard
getopt(3): get option character from command line argument list
getstr(3), getnstr(3), wgetstr(3), wgetnstr(3), mvgetstr(3), mvgetnstr(3), mvwgetstr(3), mvwgetnstr(3): accept character strings from curses terminal keyboard
iconv_canonicalize(3): resolving character encoding names to canonical form
iconvlist(3): retrieving a list of character encodings supported by iconv(3)
in_wch(3), mvin_wch(3), mvwin_wch(3), win_wch(3): extract a complex character and rendition from a window
in_wchstr(3), in_wchnstr(3), win_wchstr(3), win_wchnstr(3), mvin_wchstr(3), mvin_wchnstr(3), mvwin_wchstr(3), mvwin_wchnstr(3): get an array of complex characters and renditions from a curses window
inch(3), winch(3), mvinch(3), mvwinch(3): get a character and attributes from a curses window
inchstr(3), inchnstr(3), winchstr(3), winchnstr(3), mvinchstr(3), mvinchnstr(3), mvwinchstr(3), mvwinchnstr(3): get a string of characters (and attributes) from a curses window
index(3), rindex(3): locate character in string
ins_wch(3), mvins_wch(3), mvwins_wch(3), wins_wch(3): insert a complex character and rendition into a window
ins_wstr(3), ins_nwstr(3), wins_wstr(3), wins_nwstr(3), mvins_wstr(3), mvins_nwstr(3), mvwins_wstr(3), mvwins_nwstr(3): insert a wide-character string into a curses window
insch(3), winsch(3), mvinsch(3), mvwinsch(3): insert a character before cursor in a curses window
instr(3), innstr(3), winstr(3), winnstr(3), mvinstr(3), mvinnstr(3), mvwinstr(3), mvwinnstr(3): get a string of characters from a curses window
inwstr(3), innwstr(3), winwstr(3), winnwstr(3), mvinwstr(3), mvinnwstr(3), mvwinwstr(3), mvwinnwstr(3): get a string of wchar_t characters from a curses window
isalnum(3): alphanumeric character test
isalpha(3): alphabetic character test
isascii(3): test for ASCII character
isblank(3): space or tab character test
iscntrl(3): control character test
isdigit(3), isnumber(3): decimal-digit character test
isgraph(3): printing character test (space character exclusive)
isideogram(3): ideographic character test
islower(3): lower-case character test
isphonogram(3): phonographic character test
isprint(3): printing character test (space character inclusive)
ispunct(3): punctuation character test
isrune(3): valid character test
isspace(3): white-space character test
isspecial(3): special character test
isupper(3): upper-case character test
iswalnum(3), iswalpha(3), iswascii(3), iswblank(3), iswcntrl(3), iswdigit(3), iswgraph(3), iswhexnumber(3), iswideogram(3), iswlower(3), iswnumber(3), iswphonogram(3), iswprint(3), iswpunct(3), iswrune(3), iswspace(3), iswspecial(3), iswupper(3), iswxdigit(3): wide character classification utilities
iswalnum_l(3), iswalpha_l(3), iswcntrl_l(3), iswctype_l(3), iswdigit_l(3), iswgraph_l(3), iswlower_l(3), iswprint_l(3), iswpunct_l(3), iswspace_l(3), iswupper_l(3), iswxdigit_l(3), towlower_l(3), towupper_l(3), wctype_l(3), iswblank_l(3), iswhexnumber_l(3), iswideogram_l(3), iswnumber_l(3), iswphonogram_l(3), iswrune_l(3), iswspecial_l(3), nextwctype_l(3), towctrans_l(3), wctrans_l(3): wide character classification utilities
iswctype(3), wctype(3): wide character class functions
isxdigit(3), ishexnumber(3): hexadecimal-digit character test
lessecho(1): expand metacharacters
mandoc_char(7): mandoc special characters
mblen(3): get number of bytes in a character
mbrlen(3): get number of bytes in a character (restartable)
mbrtowc(3), mbrtoc16(3), mbrtoc32(3): convert a character to a wide-character code (restartable)
mbsrtowcs(3), mbsnrtowcs(3): convert a character string to a wide-character string (restartable)
mbstowcs(3): convert a character string to a wide-character string
mbtowc(3): convert a character to a wide-character code
memccpy(3): copy string until character found
multibyte(3): multibyte and wide character manipulation functions
nextwctype(3): iterate through character classes
openpam_straddch(3): add a character to a string, expanding the buffer if needed
revoke(1): revoke a character device
set_field_just(3), field_just(3): retrieve field characteristics
strchr(3), strrchr(3), strchrnul(3): locate character in string
strings(1): print the strings of printable characters in files
strpbrk(3): locate multiple characters in string
towctrans(3), wctrans(3): wide character mapping functions
towlower(3): upper case to lower case letter conversion (wide character version)
towupper(3): lower case to upper case letter conversion (wide character version)
tr(1): translate characters
ungetc(3): un-get character from input stream
ungetwc(3): un-get wide character from input stream
unvis(3), strunvis(3), strnunvis(3), strunvisx(3), strnunvisx(3): decode a visual representation of characters
vis(1): display non-printable characters in a visual format
vis(3), nvis(3), strvis(3), stravis(3), strnvis(3), strvisx(3), strnvisx(3), strenvisx(3), svis(3), snvis(3), strsvis(3), strsnvis(3), strsvisx(3), strsnvisx(3), strsenvisx(3): visually encode characters
wc(1): word, line, character, and byte count
wcrtomb(3), c16rtomb(3), c32rtomb(3): convert a wide-character code to a character (restartable)
wcsftime(3): convert date and time to a wide-character string
wcsrtombs(3), wcsnrtombs(3): convert a wide-character string to a character string (restartable)
wcstok(3): split wide-character string into tokens
wcstol(3), wcstoul(3), wcstoll(3), wcstoull(3), wcstoimax(3), wcstoumax(3): convert a wide character string value to a long, unsigned long, long long, unsigned long long, intmax_t or uintmax_t integer
wcstombs(3): convert a wide-character string to a character string
wcswidth(3): number of column positions in wide-character string
wctomb(3): convert a wide-character code to a character
wcwidth(3): number of column positions of a wide-character code
wmemchr(3), wmemcmp(3), wmemcpy(3), wmemmove(3), wmemset(3), wcpcpy(3), wcpncpy(3), wcscasecmp(3), wcscat(3), wcschr(3), wcscmp(3), wcscpy(3), wcscspn(3), wcsdup(3), wcslcat(3), wcslcpy(3), wcslen(3), wcsncasecmp(3), wcsncat(3), wcsncmp(3), wcsncpy(3), wcsnlen(3), wcspbrk(3), wcsrchr(3), wcsspn(3), wcsstr(3): wide character string manipulation operations
wprintf(3), fwprintf(3), swprintf(3), vwprintf(3), vfwprintf(3), vswprintf(3): formatted wide character output conversion
wscanf(3), fwscanf(3), swscanf(3), vwscanf(3), vswscanf(3), vfwscanf(3): wide character input format conversion
BUF_MEM_new(3), BUF_MEM_new_ex(3), BUF_MEM_free(3), BUF_MEM_grow(3), BUF_MEM_grow_clean(3), BUF_reverse(3): simple character array structure
passphrase-encoding(7): How diverse parts of OpenSSL treat pass phrases character encoding
BUF_MEM_new(3), BUF_MEM_new_ex(3), BUF_MEM_free(3), BUF_MEM_grow(3), BUF_MEM_grow_clean(3), BUF_reverse(3): simple character array structure
BUF_MEM_new(3ossl), BUF_MEM_new_ex(3ossl), BUF_MEM_free(3ossl), BUF_MEM_grow(3ossl), BUF_MEM_grow_clean(3ossl), BUF_reverse(3ossl): simple character array structure
Char(3o): Character operations
DOM_CharacterData(3m): the Document Object Model (DOM) DOM_CharacterData interface
FcBlanksAdd(3): Add a character to an FcBlanks
FcCharSetAddChar(3): Add a character to a charset
FcCharSetCreate(3): Create an empty character set
FcCharSetDelChar(3): Add a character to a charset
FcCharSetDestroy(3): Destroy a character set
FcIsLower(3): check for lower case ASCII character
FcIsUpper(3): check for upper case ASCII character
FcLangGetCharSet(3): Get character map for a language
MBK_SEPAR(1): define the separator character for hierarchy
MPE_GetHostName(4): Parameters: + name : character pointer - nlen : integer
RkCvtHan(3), RkCvtHan / RkwCvtHan(3): convert double-width symbols, alphanumeric characters, hiragana, and katakana to single-width characters
RkCvtRoma(3): convert an entire character string from Romaji to kana by iteratively using RkMapRoma
RkCvtZen(3): convert ASCII characters and single-width katakana to double-width characters
SET_TRANSACTION(7): set the characteristics of the current transaction
Tcl_UniCharIsAlnum.tcl85(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsWordChar(3): routines for classification of Tcl_UniChar characters
Tcl_UniCharIsAlnum.tcl86(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsWordChar(3): routines for classification of Tcl_UniChar characters
Tcl_UniCharIsAlnum.tcl87(3), Tcl_UniCharIsAlnum(3), Tcl_UniCharIsAlpha(3), Tcl_UniCharIsControl(3), Tcl_UniCharIsDigit(3), Tcl_UniCharIsGraph(3), Tcl_UniCharIsLower(3), Tcl_UniCharIsPrint(3), Tcl_UniCharIsPunct(3), Tcl_UniCharIsSpace(3), Tcl_UniCharIsUpper(3), Tcl_UniCharIsUnicode(3), Tcl_UniCharIsWordChar(3): routines for classification of Tcl_UniChar characters
Tcl_UniCharToLower.tcl85(3), Tcl_UniCharToUpper(3), Tcl_UniCharToLower(3), Tcl_UniCharToTitle(3), Tcl_UtfToUpper(3), Tcl_UtfToLower(3), Tcl_UtfToTitle(3): routines for manipulating the case of Unicode characters and UTF-8 strings
Tcl_UniCharToLower.tcl86(3), Tcl_UniCharToUpper(3), Tcl_UniCharToLower(3), Tcl_UniCharToTitle(3), Tcl_UtfToUpper(3), Tcl_UtfToLower(3), Tcl_UtfToTitle(3): routines for manipulating the case of Unicode characters and UTF-8 strings
Tcl_UniCharToLower.tcl87(3), Tcl_UniCharToUpper(3), Tcl_UniCharToLower(3), Tcl_UniCharToTitle(3), Tcl_UtfToUpper(3), Tcl_UtfToLower(3), Tcl_UtfToTitle(3): routines for manipulating the case of Unicode characters and UTF-8 strings
Tk_SetWindowVisual.tk85(3), Tk_SetWindowVisual(3): change visual characteristics of window
Tk_SetWindowVisual.tk86(3), Tk_SetWindowVisual(3): change visual characteristics of window
Uchar(3o): Unicode characters
WordType(3): defines a word in term of allowed characters, length etc
XDrawString(3), XDrawString16(3): draw text characters
XkbSetDeviceInfo(3): Modify some or all of the characteristics of an X Input Extension device
XmDataFieldGetStringWcs(3): A DataField function that retrieves a copy of the wide character string value of a DataField widget "XmDataFieldGetStringWcs" "DataField functions" "XmDataFieldGetStringWcs"
XmDataFieldXYToPos(3): A DataField function that accesses the character position nearest an x and y position "XmDataFieldXYToPos" "DataField functions" "XmDataFieldXYToPos"
XmFontListGetNextFont(3): A font list function that allows applications to access the fonts and character sets in a font list "XmFontListGetNextFont" "font list functions" "XmFontListGetNextFont"
XmStringBaseline(3): A compound string function that returns the number of pixels between the top of the character box and the baseline of the first line of text "XmStringBaseline" "compound string functions" "XmStringBaseline"
XmStringParseText(3): A function that converts a character string to a compound string "XmStringParseText" "compound string functions" "XmStringParseText"
XmTextFieldGetLastPosition(3): A TextField function that accesses the position of the last text character "XmTextFieldGetLastPosition" "TextField functions" "XmTextFieldGetLastPosition"
XmTextFieldGetSelectionWcs(3): A TextField function that retrieves the value of a wide character encoded primary selection "XmTextFieldGetSelection\%Wcs" "TextField functions" "XmTextFieldGetSelection\%Wcs"
XmTextFieldGetStringWcs(3): A TextField function that retrieves a copy of the wide character string value of a TextField widget "XmTextFieldGetStringWcs" "TextField functions" "XmTextFieldGetStringWcs"
XmTextFieldGetSubstringWcs(3): A TextField function that retrieves a portion of a wide character internal text buffer "XmTextFieldGetSubstring\%Wcs" "TextField functions" "XmTextFieldGetSubstring\%Wcs"
XmTextFieldInsert(3): A TextField function that inserts a character string into a text string "XmTextFieldInsert" "TextField functions" "XmTextFieldInsert"
XmTextFieldInsertWcs(3): A TextField function that inserts a wide character string into a TextField widget "XmTextFieldInsertWcs" "TextField functions" "XmTextFieldInsertWcs"
XmTextFieldPosToXY(3): A TextField function that accesses the x and y position of a character position "XmTextFieldPosToXY" "TextField functions" "XmTextFieldPosToXY"
XmTextFieldReplaceWcs(3): A TextField function that replaces part of a wide character string in a TextField widget "XmTextFieldReplaceWcs" "TextField functions" "XmTextFieldReplaceWcs"
XmTextFieldSetStringWcs(3): A TextField function that sets a wide character string value "XmTextFieldSetStringWcs" "TextField functions" "XmTextFieldSetStringWcs"
XmTextFieldXYToPos(3): A TextField function that accesses the character position nearest an x and y position "XmTextFieldXYToPos" "TextField functions" "XmTextFieldXYToPos"
XmTextFindStringWcs(3): A Text function that finds the beginning position of a wide character text string "XmTextFindStringWcs" "Text functions" "XmTextFindStringWcs"
XmTextGetCenterline(3): Return the height (length) of a character string when the writing direction is vertical
XmTextGetSelectionWcs(3): A Text function that retrieves the value of a wide character encoded primary selection "XmTextGetSelectionWcs" "Text functions" "XmTextGetSelectionWcs"
XmTextGetStringWcs(3): A Text function that retrieves a copy of the wide character string value of a Text widget "XmTextGetStringWcs" "Text functions" "XmTextGetStringWcs"
XmTextGetSubstringWcs(3): A Text function that retrieves a portion of a wide character internal text buffer "XmTextGetSubstringWcs" "Text functions" "XmTextGetSubstringWcs"
XmTextGetTopCharacter(3): A Text function that accesses the position of the first character displayed "XmTextGetTopCharacter" "Text functions" "XmTextGetTopCharacter"
XmTextInsert(3): A Text function that inserts a character string into a text string "XmTextInsert" "Text functions" "XmTextInsert"
XmTextInsertWcs(3): A Text function that inserts a wide character string into a Text widget "XmTextInsertWcs" "Text functions" "XmTextInsertWcs"
XmTextPosToXY(3): A Text function that accesses the x and y position of a character position "XmTextPosToXY" "Text functions" "XmTextPosToXY"
XmTextPosition(3): Data type for a character position within a text string "XmTextPosition" "data types" "XmTextPosition"
XmTextReplaceWcs(3): A Text function that replaces part of a wide character string in a Text widget "XmTextReplaceWcs" "Text functions" "XmTextReplaceWcs"
XmTextSetStringWcs(3): A Text function that sets a wide character string value "XmTextSetStringWcs" "Text functions" "XmTextSetStringWcs"
XmTextSetTopCharacter(3): A Text function that sets the position of the first character displayed "XmTextSetTopCharacter" "Text functions" "XmTextSetTopCharacter"
XmTextXYToPos(3): A Text function that accesses the character position nearest an x and y position "XmTextXYToPos" "Text functions" "XmTextXYToPos"
XmbTextPerCharExtents(3), XwcTextPerCharExtents(3), Xutf8TextPerCharExtents(3): obtain per-character information for a text string
aa_scrheight(3): returns height of the output screen in characters
aa_scrwidth(3): returns width of the output screen in characters
activateCDKGraph(3), activateCDKGraph destroyCDKGraph drawCDKGraph eraseCDKGraph getCDKGraphBox getCDKGraphCharacter getCDKGraphCharacters getCDKGraphDisplayType getCDKGraphValue getCDKGraphValues moveCDKGraph newCDKGraph positionCDKGraph setCDKGraph setCDKGraphBackgroundAttrib setCDKGraphBackgroundColor setCDKGraphBox setCDKGraphBoxAttribute setCDKGraphCharacter setCDKGraphCharacters setCDKGraphDisplayType setCDKGraphHorizontalChar setCDKGraphLLChar setCDKGraphLRChar setCDKGraphULChar setCDKGraphURChar setCDKGraphValue setCDKGraphValues setCDKGraphVerticalChar cdk_graph(3): curses graph widget
activateCDKRadio(3), activateCDKRadio destroyCDKRadio drawCDKRadio eraseCDKRadio getCDKRadioBox getCDKRadioChoiceCharacter getCDKRadioCurrentItem getCDKRadioHighlight getCDKRadioItems getCDKRadioLeftBrace getCDKRadioRightBrace getCDKRadioSelectedItem injectCDKRadio moveCDKRadio newCDKRadio positionCDKRadio setCDKRadio setCDKRadioBackgroundAttrib setCDKRadioBackgroundColor setCDKRadioBox setCDKRadioBoxAttribute setCDKRadioChoiceCharacter setCDKRadioCurrentItem setCDKRadioHighlight setCDKRadioHorizontalChar setCDKRadioItems setCDKRadioLLChar setCDKRadioLRChar setCDKRadioLeftBrace setCDKRadioPostProcess setCDKRadioPreProcess setCDKRadioRightBrace setCDKRadioSelectedItem setCDKRadioULChar setCDKRadioURChar setCDKRadioVerticalChar cdk_radio(3): curses radio list widget
add_wch(3x), wadd_wch(3x), mvadd_wch(3x), mvwadd_wch(3x), echo_wchar(3x), wecho_wchar(3x): add a complex character and rendition to a curses window, then advance the cursor
add_wchstr(3x), add_wchnstr(3x), wadd_wchstr(3x), wadd_wchnstr(3x), mvadd_wchstr(3x), mvadd_wchnstr(3x), mvwadd_wchstr(3x), mvwadd_wchnstr(3x): add an array of complex characters (and attributes) to a curses window
addch(3x), waddch(3x), mvaddch(3x), mvwaddch(3x), echochar(3x), wechochar(3x): add a character (with attributes) to a curses window, then advance the cursor
addchstr(3x), addchnstr(3x), waddchstr(3x), waddchnstr(3x), mvaddchstr(3x), mvaddchnstr(3x), mvwaddchstr(3x), mvwaddchnstr(3x): add a string of characters (and attributes) to a curses window
addstr(3x), addnstr(3x), waddstr(3x), waddnstr(3x), mvaddstr(3x), mvaddnstr(3x), mvwaddstr(3x), mvwaddnstr(3x): add a string of characters to a curses window and advance cursor
addwstr(3x), addnwstr(3x), waddwstr(3x), waddnwstr(3x), mvaddwstr(3x), mvaddnwstr(3x), mvwaddwstr(3x), mvwaddnwstr(3x): add a string of wide characters to a curses window and advance cursor
allegro_404_char(3): Character used when Allegro cannot find a glyph
attr_get(3x), wattr_get(3x), attr_set(3x), wattr_set(3x), attr_off(3x), wattr_off(3x), attr_on(3x), wattr_on(3x), attroff(3x), wattroff(3x), attron(3x), wattron(3x), attrset(3x), wattrset(3x), chgat(3x), wchgat(3x), mvchgat(3x), mvwchgat(3x), color_set(3x), wcolor_set(3x), standend(3x), wstandend(3x), standout(3x), wstandout(3x): curses character and window attribute control routines
bindCDKObject(3), bindCDKObject checkCDKObjectBind cleanCDKObjectBindings unbindCDKObject getcCDKObject getchCDKObject cdk_binding(3): Curses Development Kit Character Binding Capabilities
border_set(3x), wborder_set(3x), box_set(3x), hline_set(3x), whline_set(3x), mvhline_set(3x), mvwhline_set(3x), vline_set(3x), wvline_set(3x), mvvline_set(3x), mvwvline_set(3x): create curses borders or lines using complex characters and renditions
cd-drive(1): show CD-ROM drive characteristics
cgiEscape(3): HTML escape certain characters in a string
charset.conf(5): Configuration file for legacy character set support by Sympa
chkascii(1): a small C program that checks whether a file is purely ASCII plain-text or else contains any non-ASCII characters
cntraining(1): character normalization training for Tesseract
crunch(1): generate wordlists from a character set
cw(1): sound characters as Morse code on the soundcard or console speaker
cwgen(1): generate groups of random characters for Morse code practice
dcod2lum(1): Convert hardcopy characteristic curve file to softcopy format
delch(3x), wdelch(3x), mvdelch(3x), mvwdelch(3x): delete character under the cursor in a curses window
deurlname(1): Remove URL-encoded characters from file names
draw_character_ex(3): Draws non transparent pixels of the sprite with a color. Allegro game programming library
dynamic_field_info(3x), field_info(3x): retrieve field characteristics
elinks(1): lynx-like alternative character mode WWW browser
eq(3), ecq(3): string equality test. countchar, countchar2, countstr count characters and strings within the string. replace, replace_detach, limittextwidth miscellaneous text functions
eqnchar(7): special character definitions for eqn
escape(1): escape shell special characters in a string
explain_fgetc_or_die(3): input of characters and report errors require_index { "input of characters and report errors" }
explain_fputc_or_die(3): output of characters and report errors require_index { "output of characters and report errors" }
explain_getc_or_die(3): input of characters and report errors require_index { "input of characters and report errors" }
explain_getchar_or_die(3): input of characters and report errors require_index { "input of characters and report errors" }
explain_iconv_open_or_die(3): prepare for charset conversion and report errors require_index { "allocate descriptor for character set conversion and report errors" }
explain_iconv_or_die(3): perform character set conversion and report errors require_index { "perform character set conversion and report errors" }
explain_putc_or_die(3): output of characters and report errors require_index { }
explain_putchar_or_die(3): output of characters and report errors require_index { "output of characters and report errors" }
explain_ungetc_or_die(3): push a character back to a stream and report errors require_index { "push a character back to a stream and report errors" }
extract_font_range(3): Extracts a range of characters from a font. Allegro game programming library
fcft_glyph_rasterize(3): rasterize a glyph for a wide character
fcft_kerning(3): calculate kerning distance between two wide characters
fcft_precompose(3): pre-compose two wide characters into one
figlet(6), FIGlet(6): display large characters made up of ordinary screen characters
firestring_estr_munch(3): remove characters from the beginning of an estring
firestring_estr_strchr(3): search for a character in an estring
fish_key_reader(1): explore what characters keyboard keys send
fix_filename_slashes(3): Converts all the directory separators to a standard character. Allegro game programming library
fontglide(6): characters float onto the screen to form words
fribidi_get_bidi_type(3): get character bidi type
fribidi_get_bidi_types(3): get bidi types for an string of characters
fribidi_get_bracket(3): get bracketed character
fribidi_get_bracket_types(3): get bracketed characters
fribidi_get_joining_type(3): get character joining type
fribidi_get_joining_types(3): get joining types for an string of characters
fribidi_get_mirror_char(3): get mirrored character
fribidi_get_type(3): get character bidi type
fribidi_get_type_internal(3): get character bidi type
fribidi_parse_charset(3): parse character set name
fwcscmp(3): fuzzy comparison of two wide-character strings require_index { }
fwcscmpi(3): fuzzy comparison of two wide-character strings require_index { }
gauche-cesconv(1): convert text from one character encoding scheme to another
get_font_range_begin(3): Returns the start of a character range in a font. Allegro game programming library
get_font_range_end(3): Returns the last character of a character range in a font. Allegro game programming library
get_font_ranges(3): Returns the number of character ranges in a font. Allegro game programming library
get_wch(3x), wget_wch(3x), mvget_wch(3x), mvwget_wch(3x), unget_wch(3x): get (or push back) a wide character from curses terminal keyboard
get_wstr(3x), getn_wstr(3x), wget_wstr(3x), wgetn_wstr(3x), mvget_wstr(3x), mvgetn_wstr(3x), mvwget_wstr(3x), mvwgetn_wstr(3x): get an array of wide characters from a curses terminal keyboard
getcchar(3x), setcchar(3x): Get a wide character string and rendition from a cchar_t or set a cchar_t from a wide-character string
getch(3x), wgetch(3x), mvgetch(3x), mvwgetch(3x), ungetch(3x), has_key(3x): get (or push back) characters from curses terminal keyboard
getstr(3x), getnstr(3x), wgetstr(3x), wgetnstr(3x), mvgetstr(3x), mvgetnstr(3x), mvwgetstr(3x), mvwgetnstr(3x): accept character strings from curses terminal keyboard
glutBitmapCharacter(3): renders a bitmap character using OpenGL
glutBitmapWidth(3): returns the width of a bitmap character, glutBitmapLength returns the length of a bitmap font string
glutStrokeCharacter(3): renders a stroke character using OpenGL
glutStrokeWidth(3): returns the width of a stroke character, glutStrokeLength returns the length of a stroke font string
gmknod(1), mknod(1): make block or character special files
groff_char(7): groff character names
gtr(1), tr(1): translate or delete characters
hxuncdata(1): replace CDATA sections by character entities
hxunent(1): replace HTML predefined character entities by UTF-8
iconv(1): character set conversion
iconv(3): perform character set conversion
iconv_close(3): deallocate descriptor for character set conversion
iconv_open(3): allocate descriptor for character set conversion
iconv_open_into(3): initialize descriptor for character set conversion
identify(1): describes the format and characteristics of one or more image files
in_wch(3x), mvin_wch(3x), mvwin_wch(3x), win_wch(3x): extract a complex character and rendition from a window
in_wchstr(3x), in_wchnstr(3x), win_wchstr(3x), win_wchnstr(3x), mvin_wchstr(3x), mvin_wchnstr(3x), mvwin_wchstr(3x), mvwin_wchnstr(3x): get an array of complex characters and renditions from a curses window
inch(3x), winch(3x), mvinch(3x), mvwinch(3x): get a character and attributes from a curses window
inchstr(3x), inchnstr(3x), winchstr(3x), winchnstr(3x), mvinchstr(3x), mvinchnstr(3x), mvwinchstr(3x), mvwinchnstr(3x): get a string of characters (and attributes) from a curses window
ins_wch(3x), mvins_wch(3x), mvwins_wch(3x), wins_wch(3x): insert a complex character and rendition into a window
ins_wstr(3x), ins_nwstr(3x), wins_wstr(3x), wins_nwstr(3x), mvins_wstr(3x), mvins_nwstr(3x), mvwins_wstr(3x), mvwins_nwstr(3x): insert a wide-character string into a curses window
insch(3x), winsch(3x), mvinsch(3x), mvwinsch(3x): insert a character before cursor in a curses window
instr(3): find an occurence of a string in a string, starting at a specified character. man1/alc_origin.1
instr(3x), innstr(3x), winstr(3x), winnstr(3x), mvinstr(3x), mvinnstr(3x), mvwinstr(3x), mvwinnstr(3x): get a string of characters from a curses window
inwstr(3x), innwstr(3x), winwstr(3x), winnwstr(3x), mvinwstr(3x), mvinnwstr(3x), mvwinwstr(3x), mvwinnwstr(3x): get a string of wchar_t characters from a curses window
japana(1): HTTP proxy converting Japanese characters into ASCII
juyin-learn(1): show Chinese characters' phonations
kermit(1): C(hyKermit 9.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic (if not advanced) use of C(hyKermit 9.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 9.0 from earlier releases. This document is also available as a Web page at: http://www.columbia.edu/kermit/ckututor.html

lessecho(1): expand metacharacters
libowfat_scan_charsetnskip(3), scan_charsetnskip(3): skip characters from set
libowfat_scan_noncharsetnskip(3), scan_noncharsetnskip(3): skip characters not from set
libowfat_str_chr(3), str_chr(3): find character in ASCIIZ string
libowfat_str_rchr(3), str_rchr(3): find character in ASCIIZ string
libowfat_stralloc_append(3), stralloc_append(3): append a character to a stralloc
links(1): lynx-like alternative character mode WWW browser
m17nCharacter(3m17n), Character(3m17n): Character objects and API for them
m17nFontset(3m17n), Fontset(3m17n): A fontset is an object that maps a character to fonts
mandoc_char(7): mandoc special characters
mariadb-conv(1): character set conversion utility for MariaDB
mate-charpick-applet(1): Character Picker Applet for the MATE panel
mchar_define_property(3m17n): Define a character property
mchar_encode(3m17n): Encode a character code
mchar_get_prop(3m17n): Get the value of a character property
mchar_get_prop_table(3m17n): Get the char-table for a character property
mchar_map_charset(3m17n): Call a function for all the characters in a specified charset
mchar_put_prop(3m17n): Set the value of a character property
mchartable_lookup(3m17n): Return the assigned value of a character in a chartable
mchartable_map(3m17n): Call a function for characters in a chartable
mchartable_max_char(3m17n): Return the maximum character whose value is set in a chartabe
mchartable_min_char(3m17n): Return the minimum character whose value is set in a chartabe
mchartable_range(3m17n): Search for characters that have non-default value
mchartable_set(3m17n): Assign a value to a character in a chartable
mchartable_set_range(3m17n): Assign a value to the characters in the specified range
mconv_getc(3m17n): Read a character via a code converter
mconv_putc(3m17n): Write a character via a code converter
mconv_ungetc(3m17n): Push a character back to a code converter
mdbCharsetList(5): List of character set definitions
mdraw_coordinates_position(3m17n): Return the character position nearest to the coordinates
mdraw_per_char_extents(3m17n): Obtain per character dimension information
mdraw_text_per_char_extents(3m17n): Compute the text dimensions of each character of M-text
memrchr(3): find last occurence of a character within another memory block
mflt_find(3m17n): Find an FLT suitable for the specified character and font
mflt_run(3m17n): Layout characters with an FLT
msgconv(1): character set conversion for message catalog
mtext_cat_char(3m17n): Append a character to an M-text
mtext_character(3m17n): Search a character in an M-text
mtext_chr(3m17n): Return the position of the first occurrence of a character in an M-text
mtext_cmp(3m17n): Compare two M-texts character-by-character
mtext_copy(3m17n): Copy characters in the specified range into an M-text
mtext_cspn(3m17n): Search an M-text for the complement of a set of characters
mtext_del(3m17n): Delete characters in the specified range destructively
mtext_ins_char(3m17n): Insert a character into an M-text
mtext_len(3m17n): Number of characters in M-text
mtext_ncmp(3m17n): Compare initial parts of two M-texts character-by-character
mtext_ncpy(3m17n): Copy the first some characters in an M-text to another
mtext_pbrk(3m17n): Search an M-text for any of a set of characters
mtext_rchr(3m17n): Return the position of the last occurrence of a character in an M-text
mtext_ref_char(3m17n): Return the character at the specified position in an M-text
mtext_set_char(3m17n): Store a character into an M-text
mtext_spn(3m17n): Search an M-text for a set of characters
oggz-scan(1): Scan an Ogg file and output characteristic landmarks
ordchr(3am): convert characters to strings and vice versa
pack_getc(3): Returns the next character from a stream. Allegro game programming library
pack_putc(3): Puts a character in the stream. Allegro game programming library
pack_ungetc(3): Moves one single character back to the input buffer. Allegro game programming library
paicc(1), paint_changed_characters(1): paicc
panda_nfspagemodde(3): defines display characteristics for the PDF document if it is using non fullscreen mode after defaulting to fullscreen mode
panda_putc(3): output a single character to the PDF file
panda_setcharacterspacing(3): set the space between characters
passphrase-encoding(7): How diverse parts of OpenSSL treat pass phrases character encoding
passphrase-encoding(7ossl): How diverse parts of OpenSSL treat pass phrases character encoding
pcre2_set_character_tables(3), PCRE2(3): Perl-compatible regular expressions (revised API)
pescan(1): identify suspicious characteristics in PE files
plotfont(1): produce character maps of fonts supported by the plotting utilities SB \$1 \$2
readkey(3): Returns the next character from the keyboard buffer. Allegro game programming library
rev(1): reverse lines characterwise
rumakeindex(1): process a LaTeX index using Russian Cyrillic characters
sansi(1): -- StripANSI; strip ANSI escape sequences/characters from text files
sc_CharacterTable(3), sc::CharacterTable(3): The CharacterTable class provides a workable character table for all of the non-cubic point groups
sc_PointGroup(3), sc::PointGroup(3): The PointGroup class is really a place holder for a CharacterTable
scancode_to_ascii(3): Converts a scancode to an ASCII character. Allegro game programming library
set_field_just(3x), field_just(3x): retrieve field characteristics
sshping(8): measure character-echo latency and bandwidth for an interactive ssh session
strcins(3): insert a character at the beginning of a string
strdel(3): delete characters from beginning of string
strequate(3): map a list of characters to the same value
streqvmap(3): Set the character mappings for the streqv functions
strings(1): print the sequences of printable characters in files
strings(1): print the strings of printable characters in files
strinit(3): initialize a string with a given character to a given length
strmaxcpy(3): copy at most a given number of characters of string
strnchr(l): locate character in string
strset(3): set all characters in a string to a given character
strshuffle(3): make the characters in a string be in random order
toilet(1), TOIlet(1): display large colourful characters
transpose_font(3): Transposes all characters in a font. Allegro game programming library
ugetat(3): Finds out the value of a character in a string. Allegro game programming library
uinsert(3): Inserts a character in a string. Allegro game programming library
uisdigit(3): Tells if a character is a digit. Allegro game programming library
uisspace(3): Tells if a character is whitespace. Allegro game programming library
unicharset(5): character properties file used by tesseract(1)
unicode::iconvert::convert(3), unicode::ucs_4(3), unicode::ucs_2(3), unicode::utf_8(3), unicode::iso_8859_1(3): unicode character set conversion
unicode_category_lookup(3), unicode_isalnum(3), unicode_isalpha(3), unicode_isblank(3), unicode_isdigit(3), unicode_isgraph(3), unicode_islower(3), unicode_ispunct(3), unicode_isspace(3), unicode_isupper(3): unicode character categorization
unicode_default_chset(3), unicode_locale_chset(3): return the system character set name
unicode_emoji_lookup(3), unicode_emoji(3), unicode_emoji_presentation(3), unicode_emoji_modifier(3), unicode_emoji_modifier_base(3), unicode_emoji_component(3), unicode_emoji_extended_pictographic(3): look up unicode characters Unicode Emoji Classification
unicode_html40ent_lookup(3): look up unicode character for an HTML 4.0 entity
unicode_u_ucs4_native(3), unicode_u_ucs2_native(3), unicode_convert_init(3), unicode_convert(3), unicode_convert_deinit(3), unicode_convert_tocbuf_init(3), unicode_convert_tou_init(3), unicode_convert_fromu_init(3), unicode_convert_uc(3), unicode_convert_tocbuf_toutf8_init(3), unicode_convert_tocbuf_fromutf8_init(3), unicode_convert_toutf8(3), unicode_convert_fromutf8(3), unicode_convert_tobuf(3), unicode_convert_tou_tobuf(3), unicode_convert_fromu_tobuf(3): unicode character set conversion
unicode_uc(3), unicode_lc(3), unicode_tc(3), unicode_convert_tocase(3): unicode uppercase, lowercase, and titlecase character lookup
unicrud(6): Bounces a random Unicode character on the screen
unihist(1): Generate a histogram of the characters in a Unicode file
uniname(1): Name the characters in a Unicode text file
unireverse(1): Reverse each line of UTF-8 input character-by-character
uoffset(3): Finds the offset of a character in a string. Allegro game programming library
ureadkey(3): Returns the next unicode character from the keyboard buffer. Allegro game programming library
uremove(3): Removes a character from a string. Allegro game programming library
urxvt-block-graphics-to-ascii(1), block-graphics-to-ascii(1): map block graphics to ascii characters
usetat(3): Replaces a character in a string. Allegro game programming library
ustrchr(3): Finds the first occurrence of a character in a string. Allegro game programming library
ustrlen(3): Tells the number of characters in a string. Allegro game programming library
ustrpbrk(3): Finds the first character that matches any in a set. Allegro game programming library
ustrrchr(3): Finds the last occurrence of a character in a string. Allegro game programming library
utf8trans(1): Transliterate UTF-8 characters according to a table
uwidth_max(3): Number of bytes a character can occupy. Allegro game programming library
vfs_catia(8): translate illegal characters in Catia filenames
vga_getkey(3): read a character from the keyboard without waiting
vga_setflipchar(3): set the character causing a vga_flip()
viz(1): Makes invisible characters visible; binary file lister
xascii(1): ascii character set table for X
xcmsdb(1): Device Color Characterization utility for X Color Management System
xfd(1): display all the characters in an X font
yaz-iconv(1): YAZ Character set conversion utility
yodlstriproff(1): strip ASCII control characters
Algorithm::Evolutionary::Individual::String(3), Algorithm::Evolutionary::Individual::String(3): A character string to be evolved. Useful mainly in word games
Algorithm::Evolutionary::Op::String_Mutation(3): Single character string mutation
Badger::Codec::HTML(3): encode and decode reserved characters in HTML
Bio::NEXUS::CharactersBlock(3): Represents a CHARACTERS Block (Data or Characters) of a NEXUS file
Bio::NEXUS::Tools::GraphicsParams(3), Graphics(3): represents a character block (Data or Characters) of a NEXUS file
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3): PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Bio::NEXUS::WeightSet(3): Represents column weights in alignment ( for each character)
Bio::Phylo::Matrices::Character(3): A character (column) in a matrix
Bio::Phylo::Matrices::Characters(3): Container of character objects
Bio::Phylo::Matrices::Datatype(3): Validator of character state data
Bio::Phylo::Matrices::Datum(3): Character state sequence
Bio::Phylo::Matrices::DatumRole(3): Extra behaviours for a character state sequence
Bio::Phylo::Matrices::Matrix(3): Character state matrix
Bio::Phylo::Matrices::MatrixRole(3): Extra behaviours for a character state matrix
Bio::Phylo::Matrices::TypeSafeData(3): Superclass for objects that contain character data
Bio::Phylo::Models::Substitution::Binary(3): Binary character substitution model
BorderStyle::ASCII::SingleLine(3): Single line border with ASCII characters
BorderStyle::ASCII::SingleLineHorizontalOnly(3): Single line border with ASCII characters, horizontal only
BorderStyle::ASCII::SingleLineInnerOnly(3): Single line border with ASCII characters, between columns only
BorderStyle::ASCII::SingleLineOuterOnly(3): Single line border with ASCII characters, outer borders only
BorderStyle::ASCII::SingleLineVerticalOnly(3): Single line border with ASCII characters, vertical only
BorderStyle::BoxChar::SingleLine(3): Single line border with box-drawing characters
BorderStyle::BoxChar::SingleLineHorizontalOnly(3): Single line border with box-drawing characters, horizontal only
BorderStyle::BoxChar::SingleLineInnerOnly(3): Single line border with box-drawing characters, between columns only
BorderStyle::BoxChar::SingleLineOuterOnly(3): Single line border with box-drawing characters, outer borders only
BorderStyle::BoxChar::SingleLineVerticalOnly(3): Single line border with box-drawing characters, vertical only
BorderStyle::UTF8::DoubleLine(3): Double-line border with UTF8 characters
BorderStyle::UTF8::SingleLine(3): Single-line border with UTF8 characters
BorderStyle::UTF8::SingleLineBold(3): Bold single-line border with UTF8 characters
BorderStyle::UTF8::SingleLineBoldHeader(3): Single-line border (header box bold) with UTF8 characters
BorderStyle::UTF8::SingleLineCurved(3): Single-line border with UTF8 characters, curved edges
BorderStyle::UTF8::SingleLineHorizontalOnly(3): Single line border with box-drawing characters, horizontal only
BorderStyle::UTF8::SingleLineInnerOnly(3): Single line border with UTF8 characters, between columns only
BorderStyle::UTF8::SingleLineOuterOnly(3): Single line border with UTF8 characters, outer borders only
BorderStyle::UTF8::SingleLineVerticalOnly(3): Single line border with UTF8 characters, vertical only
CPAN::HandleConfig(3): internal configuration handling for CPAN.pm n .SS """CLASS->safe_quote ITEM""" .SS "CLASS->safe_quote ITEM" Subsection "CLASS->safe_quote ITEM" Quotes an item to become safe against spaces in shell interpolation. An item is enclosed in double quotes if: - the item contains spaces in the middle - the item does not start with a quote This happens to avoid shell interpolation problems when whitespace is present in directory names. This method uses commands_quote to determine the correct quote. If commands_quote is a space, no quoting will take place. if it starts and ends with the same quote character: leave it as it is if it contains no whitespace: leave it as it is if it contains whitespace, then if it contains quotes: better leave it as it is else: quote it with the correct quote type for the box we're on
CSS::SAC::Selector::CharacterData(3): SAC CharacterDataSelector
Convert::Recode(3): make mapping functions between character sets
Data::Unixish::lcfirst(3): Convert first character of text to lowercase
Data::Unixish::ucfirst(3): Convert first character of text to uppercase
DtEditorGetLastPosition(3): retrieve the position of the last character in a DtEditor widget
Encode(3): character encodings in Perl
Encode::ISO2022(3): ISO/IEC 2022 character encoding scheme
Encode::ISO2022::CCS(3): coded character sets for ISO/IEC 2022 character encoding scheme
Encode::ISO2022JP2(3): iso-2022-jp-2 - Extended iso-2022-jp character set
Encode::JISLegacy(3): Coded character sets for legacy JIS
Encode::JP::Emoji::Property(3): Emoji named character properties
Encode::X11(3): -- character encodings for X11
File::Cmp(3): compare two files character by character
Font::FreeType::CharMap(3): character map from font typefaces loaded from Font::FreeType
Font::TTF::Cmap(3): Character map table
Font::TTF::Features::Size(3): Class for Character Variants Feature Parameters
Font::TTF::OldCmap(3): Character map table This module is deprecated
Form::Sensible::Field::LongText(3): Field for representing large amounts of character-string data
Form::Sensible::Field::Text(3): Field for representing character-strings
Getopt::Std(3): Process single-character switches with switch clustering
Goo::TabAwareEditor(3), TabAwareEditor(3): Use the TabConverter to fix characters
Goo::TabConverter(3): Convert tab characters to four spaces
HTML::DOM::CharacterData(3): A base class shared by HTML::DOM::Text and ::Comment
HTML::FormFu::Constraint::ASCII(3): ASCII Characters Constraint
HTML::FormFu::Constraint::Printable(3): Printable Characters Constraint
HTML::FormFu::Filter::NonNumeric(3): filter removing all non-numeric characters
HTML::Truncate(3): (beta software) truncate HTML by percentage or character count while preserving well-formedness
Hailo::Tokenizer::Chars(3): A character tokenizer for Hailo
I18N::Charset(3): IANA Character Set Registry names and Unicode::MapUTF8 (et al.) conversion scheme names
Image::ExifTool::Charset(3): ExifTool character encoding routines
JavaScript::Squish(3): Reduce/Compact JavaScript code to as few characters as possible
LaTeX::Encode(3): encode characters for LaTeX formatting
LaTeX::ToUnicode::Tables(3): Character tables for LaTeX::ToUnicode
LaTeXML::Core::Token(3), "LaTeXML::Core::Token"(3): representation of a Token: a pair of character and category code (catcode); It extends LaTeXML::Common::Object
Lingua::Han::PinYin(3): Retrieve the Mandarin(PinYin) of Chinese character(HanZi)
Lingua::Han::Utils(3): The utility tools of Chinese character(HanZi)
Lingua::JA::Moji(3): Handle many kinds of Japanese characters
Lingua::RU::Charset(3): Perl extension for detecting and converting various russian character sets: KOI8-r, Windows-1251, CP866, ISO-8859-5, X-Mac-Cyrillic, russian text in english letters, russian part of Unicode and UTF-8. This module can be especially useful for computers with broken cyrillic locales (like foreign web hosts)
MARC::Charset::Table(3): character mapping db
MathML::Entities(3): Convert XHTML+MathML Named Entities to Numeric Character References
PDF::API3::Compat::API2::Basic::TTF::Cmap(3): Character map table
PDF::API3::Compat::API2::Basic::TTF::OldCmap(3): Character map table This module is deprecated
PDL::Char(3): -- PDL subclass which allows reading and writing of fixed-length character strings as byte PDLs
PPI::Token::Structure(3): Token class for characters that define code structure
PPIx::Regexp::Node::Range(3): Represent a character range in a character class
PPIx::Regexp::Structure::CharClass(3): Represent a character class
PPIx::Regexp::Structure::RegexSet(3): Represent a regexp character set
PPIx::Regexp::Token::CharClass(3): Represent a character class
PPIx::Regexp::Token::CharClass::POSIX(3): Represent a POSIX character class
PPIx::Regexp::Token::CharClass::POSIX::Unknown(3): Represent an unknown or unsupported POSIX character class
PPIx::Regexp::Token::CharClass::Simple(3): This class represents a simple character class
PPIx::Regexp::Token::GroupType::Switch(3): Represent the introducing characters for a switch
PPIx::Regexp::Token::Literal(3): Represent a literal character
Perl::Critic::Policy::CodeLayout::RequireASCII(3): Disallow high-bit characters
Perl::Critic::Policy::RegularExpressions::ProhibitEnumeratedClasses(3): Use named character classes instead of explicit character lists
Perl::Critic::Policy::RegularExpressions::ProhibitEscapedMetacharacters(3): Use character classes for literal meta-characters instead of escapes
Perl::Critic::Policy::ValuesAndExpressions::ProhibitEscapedCharacters(3): Write ""eN{DELETE}"" instead of ""ex7F"", etc
Plucene::Analysis::CharTokenizer(3): base class for character tokenisers
Rose::DB::Object::Metadata::Column::Character(3): Character column metadata
Rose::DB::Object::Metadata::Column::Varchar(3): Variable-length character column metadata
SWF::Builder::Character::Bitmap(3): SWF Bitmap object
SWF::Builder::Character::EditText(3): SWF dynamic editable text object
SWF::Builder::Character::Font(3): SWF font object
SWF::Builder::Character::MovieClip(3): SWF movie clip object
SWF::Builder::Character::Shape(3): SWF shape character
SWF::Builder::Character::Sound(3): SWF Sound character
SWF::Builder::Character::Text(3): SWF static text object
SWF::Character(3): SWF Character Class
SWF::FontCharacter(3): SWF Font Helper Class
String::Dump(3): Dump strings of characters (or bytes) for printing and debugging
String::Multibyte(3): manipulation of multibyte character strings
TeX::Encode::charmap(3): Character mappings between TeX and Unicode
Text::ANSI::WideUtil(3): Routines for text containing ANSI color codes (wide-character functions only)
Text::ASCIITable(3): Create a nice formatted table using ASCII characters
Text::Ngrams(3): Flexible Ngram analysis (for characters, words, and more)
Text::Table::TinyColorWide(3): Text::Table::Tiny + support for colored text & wide character
Text::Table::TinyWide(3): Text::Table::Tiny + support for wide character
Text::Unaccent::PurePerl(3): remove accents from characters
Text::WideChar::Util(3): Routines for text containing wide characters
Text::WrapI18N(3): Line wrapping module with support for multibyte, fullwidth, and combining characters and languages without whitespaces between words
Text::xSV(3): read character separated files
URI::Escape(3): Percent-encode and percent-decode unsafe characters
Unicode::CharName(3): Look up Unicode character names
Unicode::Escape(3): Escape and unescape Unicode characters other than ASCII
Unicode::MapUTF8(3): Conversions to and from arbitrary character sets and UTF8
Unicode::String(3): String of Unicode characters (UTF-16BE)
Unicode::UCD(3): Unicode character database
Unicode::UTF8simple(3): Conversions to/from UTF8 from/to charactersets
VCP::Filter::stringedit(3): alter any field character by character
VM::EC2::DB::CharacterSet(3): An RDS Database Engine Character Set
WWW::Mechanize::FormFiller::Value::Random::Chars(3): Fill characters into an HTML form field
XML::DOM::CharacterData(3): Common interface for Text, CDATASections and Comments
XML::Elemental::Characters(3): a generic characters object
XML::Filter::BufferText(3): Filter to put all characters() in one event
XML::Filter::CharacterChunk(3): SAX Filter for Wellballanced Chunks
XML::GDOME::CharacterData(3), XML::GDOME::CharacterData(3): Interface CharacterData implementation
XML::LibXML::Common(3): Constants and Character Encoding Routines
XML::RSS::Parser::Characters(3): an object representing a character data in an RSS parse tree
ascii(1), unicode(1): interpret ASCII, Unicode characters
bytes(3): Perl pragma to expose the individual bytes of characters
chafa(1): Character art facsimile generator
charnames(3): access to Unicode character names and named character sequences; also define character names
dtudcfonted(1): Edit user-defined characters
dumpstr(1): Dump strings of characters on the command line
encguess(1): guess character encodings of files
figlet.pl(1): display large characters made up of ordinary screen characters
fish-completions(1): Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
fish_key_reader(1): explore what characters keyboard keys send
fix_latin(1): filters a data stream that is predominantly utf8 and 'fixes' any latin (ie: non-ASCII 8 bit) characters
freq(1): print histogram of character frequencies
g.dirseps(1), g.dirseps (1): Internal GRASS utility for converting directory separator characters. Converts any directory separator characters in the input string to or from native host format, and writes the changed path to standard output. Useful in scripts for Windows compatibility
isalpharune(3), islowerrune(3), isspacerune(3), istitlerune(3), isupperrune(3), tolowerrune(3), totitlerune(3), toupperrune(3): Unicode character classes and cases
js_compactor(1): Command line utility to reduce JavaScript code to as few characters as possible
kcgi_buf_puts(3): put a character into a kcgi buffer
keyboard(7): how to type characters
khtml_entity(3): put named character entity content for kcgihtml
khtml_ncr(3): put character entity content for kcgihtml
khtml_putc(3): put character content for kcgihtml
khttp_putc(3): put character content for kcgi
kitty.conf(5): kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2. You can reload the config file within kitty by pressing %ctrl+shift+f5 or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing the %ctrl+shift+f6 key. kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the kitty --config option or use the KITTY_CONFIG_DIRECTORY environment variable. See the kitty --config option for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. For example: 0.0 3.5 C include other.conf P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty list-fonts command. By default they are derived automatically, by the OSes font system. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words "HELLO WORLD" display in kitty as "WORLD HELLO", and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 adjust_line_height, adjust_column_width 0.0 3.5 C adjust_line_height 0 adjust_column_width 0 P Change the size of each character cell kitty renders. You can use either numbers, which are interpreted as pixels or percentages (number followed by %), which are interpreted as percentages of the unmodified values. You can use negative pixels or percentages less than 100% to reduce sizes (but this might cause rendering artifacts). 0.0 adjust_baseline 0.0 3.5 C adjust_baseline 0 P Adjust the vertical alignment of text (the height in the cell at which text is positioned). You can use either numbers, which are interpreted as pixels or a percentages (number followed by %), which are interpreted as the percentage of the line height. A positive value moves the baseline up, and a negative value moves them down. The underline and strikethrough positions are adjusted accordingly. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. symbol_map itself can be specified multiple times. Syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features setting. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code Retina includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code Retina also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %Harfbuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, these are read from the FontConfig database first and then this, setting is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty + list-fonts --psnames: 0.0 3.5 C $ kitty + list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero: 0.0 3.5 C font_features FiraCode-Retina +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P Change the sizes of the lines used for the box drawing unicode characters These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P Choose the color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of (block, beam, underline). Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P Defines the thickness of the beam cursor (in pts) 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P Defines the thickness of the underline cursor (in pts) 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval (in seconds) at which to blink the cursor. Set to zero to disable blinking. Negative values mean use system default. Note that numbers smaller than %repaint_delay will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size, used only for browsing the scrollback buffer (in MB). This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII text, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Modify the amount scrolled by the mouse wheel. Note this is only used for low precision scrolling devices, not for high precision scrolling on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Modify the amount scrolled by a touchpad. Note this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. url_style can be one of: none, single, double, curly 0.0 open_url_with 0.0 3.5 C open_url_with default P The program with which to open URLs that are clicked on. The special value default means to use the operating system(aqs default URL handler. 0.0 url_prefixes 0.0 3.5 C url_prefixes http https file ftp gemini irc gopher mailto news git P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, simply selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selections. You can instead specify a name such as a1 to copy to a private kitty buffer instead. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C map cmd+shift+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the unicode database will be matched. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
kxml_putc(3): put character content for kcgixml
minifig.pl(1): display large characters made up of ordinary screen characters
native2ascii(1): Creates localizable applications by converting a file with characters in any supported character encoding to one with ASCII and/or Unicode escapes or vice versa
p(1): browse or page through files and filter unprintable characters
peekc(3), peekc()(3): shows the next character in the file
perlrecharclass(1): Perl Regular Expression Character Classes Xref "character class"
perluniprops(1): Index of Unicode Version 14.0.0 character properties in Perl
qray(nged): Gets/sets query ray characteristics
quote(3), quotestrdup(3), quoterunestrdup(3), unquotestrdup(3), unquoterunestrdup(3), quotestrfmt(3), quoterunestrfmt(3), quotefmtinstall(3), doquote(3), needsrcquote(3): quoted character strings
string-escape(1): escape special characters
strings(1): print the sequences of printable characters in files
strings(1): print the strings of printable characters in files
tcs(1): translate character sets
tickit_renderbuffer_char(3), tickit_renderbuffer_char_at(3): create character regions
tickit_string_get(3): obtain the characters from a counted string
tickit_term_erasech(3): erase characters from the terminal
tickit_utf8_count(3), tickit_utf8_countmore(3): count characters in Unicode strings
tr(1): translate characters
translit(1): translates characters
tt_message_context_set(3): set the character string value of a message's context
tt_message_context_val(3): retrieve the character string of a message's context
tt_message_status_string(3): retrieve the character string stored with the status attribute for a message
tt_message_status_string_set(3): set a character string with the status attribute for a message
tt_session_prop_add(3): add a new character-string value to the end of the list of values
tt_session_prop_set(3): replace current values for a property of a session with a character-string value
umap(1): map between different character sets
unichars(1): list characters for one or more properties
unicode(3): Functions for converting Unicode characters
uninames(1): show selected Unicode character descriptions
uniprops(1): list unicode properties for one or more characters
uniquote(1): escape special characters using various quoting conventions
utf(7), UTF(7), Unicode(7), ASCII(7), rune(7): character set and format

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages