Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
beastie.4th(8)
FreeBSD ASCII art boot module
bectl(8)
Utility to manage boot environments on ZFS
beinstall.sh(8)
install a boot environment using the current FreeBSD source tree
binuptime(9), getbinuptime(9), microuptime(9), getmicrouptime(9), nanouptime(9), getnanouptime(9), sbinuptime(9), getsbinuptime(9)
get the time elapsed since boot
boot(8)
system bootstrapping procedures
boot.config(5)
Configuration file for the boot blocks
boot0cfg(8)
boot manager installation/configuration utility
boot1.efi(8)
UEFI chain loader
bootparamd(8)
boot parameter server
bootparams(5)
boot parameter database
bootpd(8), bootpgw(8)
Internet Boot Protocol server/gateway
bootpef(8)
BOOTP Extension File compiler
bootptab(5)
Internet Bootstrap Protocol server database
bootptest(8)
send BOOTP queries and print responses
boottime(9), time_second(9), time_uptime(9)
system time variables
brand.4th(8)
FreeBSD ASCII art boot module
check-password.4th(8)
FreeBSD password-checking boot module
color.4th(8)
FreeBSD color-detection boot module
delay.4th(8)
FreeBSD debugging boot module
devfs.conf(5)
boot-time devfs configuration information
diskless(8)
booting a system over the network
efi(8), UEFI(8)
Unified Extensible Firmware Interface bootstrapping procedures
efibootmgr(8)
manipulate the EFI Boot Manager
etdump(1)
Dump El Torito boot catalog information from ISO images
getbootfile(3)
get kernel boot file name
gptboot(8)
GPT bootcode for UFS on BIOS-based computers
gptzfsboot(8)
GPT bootcode for ZFS on BIOS-based computers
isoboot(8)
Boot code for hybrid ISO/USB images on BIOS-based computers
kern_reboot(9)
halt or reboot the system
libbe(3)
library for creating, destroying and modifying ZFS boot environments
loader(8)
kernel bootstrapping final stage
loader.conf(5)
system bootstrap configuration information
menu.4th(8)
FreeBSD dynamic menu boot module
menu.lua(8)
FreeBSD dynamic menu boot module
menusets.4th(8)
FreeBSD dynamic submenu boot module
nextboot(8)
specify an alternate kernel and boot flags for the next reboot
pxeboot(8)
Preboot Execution Environment (PXE) bootloader
rbootd(8)
HP remote boot server
rc(8)
command scripts for auto-reboot and daemon startup
reboot(2)
reboot system or halt processor
reboot(8), halt(8), fastboot(8), fasthalt(8)
stopping and restarting the system
sysdecode_mask(3), sysdecode_accessmode(3), sysdecode_atflags(3), sysdecode_capfcntlrights(3), sysdecode_close_range_flags(3), sysdecode_fcntl_fileflags(3), sysdecode_fileflags(3), sysdecode_filemode(3), sysdecode_flock_operation(3), sysdecode_mlockall_flags(3), sysdecode_mmap_flags(3), sysdecode_mmap_prot(3), sysdecode_mount_flags(3), sysdecode_msg_flags(3), sysdecode_msync_flags(3), sysdecode_open_flags(3), sysdecode_pipe2_flags(3), sysdecode_reboot_howto(3), sysdecode_rfork_flags(3), sysdecode_semget_flags(3), sysdecode_sendfile_flags(3), sysdecode_shmat_flags(3), sysdecode_sctp_nxt_flags(3), sysdecode_sctp_rcv_flags(3), sysdecode_sctp_snd_flags(3), sysdecode_socket_type(3), sysdecode_thr_create_flags(3), sysdecode_umtx_cvwait_flags(3), sysdecode_umtx_rwlock_flags(3), sysdecode_vmprot(3), sysdecode_wait4_options(3), sysdecode_wait6_options(3)
print name of various bitmask values
uefisign(8)
UEFI Secure Boot signing utility
version.4th(8)
FreeBSD version string boot module
zfsboot(8)
bootcode for ZFS on BIOS-based computers
zfsbootcfg(8)
specify zfsboot options for the next boot
MulticurveBootstrapping(1)
Example of using QuantLib
PS_boot(3)
Initialize library
alfio(8), Alfio(8)
an rc service for managing services at boot time through profiles
apcpwr(8)
control power on/off/reboot via an APC MasterSwitch
apriboot(1)
rewrite disc boot sector, converting between Apricot and PCDOS
beadm(1)
Utility to manage Boot Environments with ZFS
beadm(8)
manage boot environments with ZFS
ceylon-bootstrap(1), ceylon bootstrap(1)
Generates a Ceylon bootstrap script in the current directory
debootstrap(8)
Bootstrap a basic Debian system
dhcp_probe(8)
locate DCHP and BootP servers on a directly-attached network
dns-boot-check(1)
check /etc/named.boot file "dns-boot-check(1)" "check /etc/named.boot file"
dns-bootp(1)
generate bootp tables from DNS tables "dns-bootp(1)" "generate bootp tables from DNS tables"
dns-bootparams(1)
generate /etc/bootparams entries from DNS tables "dns-bootparams(1)" "generate /etc/bootparams entries from DNS tables"
eclat-reboot(1), eclat-reboot-instances(1)
reboot EC2 instances
extipl(8)
a partition-selectable boot loader/installer for IBM-PC compatible computers
grub-bios-setup(8)
set up a device to boot using GRUB
grub-mkimage(1)
make a bootable image of GRUB
grub-mknetdir(1)
prepare a GRUB netboot directory
grub-ofpathname(8)
find OpenBOOT path for a device
grub-reboot(8)
set the default boot entry for GRUB, for the next boot only
grub-set-default(8)
set the saved default boot entry for GRUB
grub-sparc64-setup(8)
set up a device to boot using GRUB
isnssetup(8)
a simple script to bootstrap an iSNS server, including security
loaderupdate(8)
update boot loaders
mkwinpeimg(1)
Make a customized bootable image of Windows PE
newsmaint(8cn), newshist(8cn)
extract history line for news article(s) newsdaily - maintain news log files and report problems newswatch - keep an eye on news system for difficulties newsboot - clean up news debris on reboot locknews - lock news system addgroup, delgroup - add and delete newsgroups, locally only adddirs - make any missing directories for active newsgroups act.to.times - create active.times file for news readers histfrom, newsfrom - list news arriving over specific time range addmissing - add missing news articles to history file
nvramtool(8)
read/write coreboot-related information
ocf_heartbeat_nfsnotify(7)
sm-notify reboot notifications
perpboot(8)
startup utility for perpd (8) and an associated logger
pxe-pdhcp(8)
An implementation of Preboot Execution Environment (PXE) server
rbdmap(8)
map RBD devices at boot time
srec_brecord(5)
Freescale MC68EZ328 Dragonball bootstrap record format require_index { }
svscanboot(8)
starts svscan (8) in the /service directory, with output and error messages logged through readproctitle (8)
syslinux(1)
install the SYSLINUX+1 bootloader on a FAT filesystem
wineboot(1)
perform Wine initialization, startup, and shutdown tasks
BambooTracker(1)
YM2608 (OPNA) tracker
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Bio::Tools::Run::Phylo::Phylip::SeqBoot(3)
Wrapper for the phylip program SeqBoot
Catalyst::Helper(3)
Bootstrap a Catalyst application
DBIx::Class::Migration::Tutorial::Setup(3)
Bootstrap your project files
ExtUtils::Mkbootstrap(3)
make a bootstrap file for use by DynaLoader
HTML::FormHandler::Widget::Block::Bootstrap(3)
block to format bare form element like bootstrap
HTML::FormHandler::Widget::Theme::Bootstrap(3)
sample bootstrap theme
HTML::FormHandler::Widget::Theme::Bootstrap3(3)
sample Bootstrap3 theme
HTML::FormHandler::Widget::Theme::BootstrapFormMessages(3)
role to render form messages using Bootstrap styling
HTML::FormHandler::Widget::Wrapper::Bootstrap(3)
Twitter Bootstrap 2.0 field wrapper
HTML::FormHandler::Widget::Wrapper::Bootstrap3(3)
Twitter Bootstrap 3.0 field wrapper
Jifty::Bootstrap(3)
Insert initial data into your database
Math::Random::OO::Bootstrap(3)
Generate random numbers with bootstrap resampling from a non-parametric distribution
Net::ACL::Bootstrap(3)
A proxy/bootstrap class for the Net::ACL class
Net::IDN::Punycode(3)
A Bootstring encoding of Unicode for IDNA (RFC 3492)
Paws::DAX::RebootNode(3)
Arguments for method RebootNode on Paws::DAX
Paws::DMS::RebootReplicationInstance(3)
Arguments for method RebootReplicationInstance on Paws::DMS
Paws::DocDB::RebootDBInstance(3)
Arguments for method RebootDBInstance on Paws::DocDB
Paws::EC2::RebootInstances(3)
Arguments for method RebootInstances on Paws::EC2
Paws::EMR::ListBootstrapActions(3)
Arguments for method ListBootstrapActions on Paws::EMR
Paws::ElastiCache::RebootCacheCluster(3)
Arguments for method RebootCacheCluster on Paws::ElastiCache
Paws::Kafka::GetBootstrapBrokers(3)
Arguments for method GetBootstrapBrokers on Paws::Kafka
Paws::Kafka::RebootBroker(3)
Arguments for method RebootBroker on Paws::Kafka
Paws::Lightsail::RebootInstance(3)
Arguments for method RebootInstance on Paws::Lightsail
Paws::Lightsail::RebootRelationalDatabase(3)
Arguments for method RebootRelationalDatabase on Paws::Lightsail
Paws::MQ::RebootBroker(3)
Arguments for method RebootBroker on Paws::MQ
Paws::Neptune::RebootDBInstance(3)
Arguments for method RebootDBInstance on Paws::Neptune
Paws::OpsWorks::RebootInstance(3)
Arguments for method RebootInstance on Paws::OpsWorks
Paws::RDS::RebootDBInstance(3)
Arguments for method RebootDBInstance on Paws::RDS
Paws::RedShift::RebootCluster(3)
Arguments for method RebootCluster on Paws::RedShift
Paws::WorkSpaces::RebootWorkspaces(3)
Arguments for method RebootWorkspaces on Paws::WorkSpaces
Pegex::Bootstrap(3)
Bootstrapping Compiler for a Pegex Grammar
SNMP::Info::DocsisCM(3)
SNMP Interface for DOCSIS Cable Modems n .SH "DESCRIPTION SNMP::Info::DocsisCM is a subclass of SNMP::Info that provides info about a given cable modem. Extracts data from the sysDescr, which is mandated in the DOCSIS specification to match ""HW_REV: <value>; VENDOR: <value>; BOOTR: <value>; SW_REV: <value>; MODEL: <value>""" .SH "DESCRIPTION SNMP::Info::DocsisCM is a subclass of SNMP::Info that provides info about a given cable modem. Extracts data from the sysDescr, which is mandated in the DOCSIS specification to match ``HW_REV: <value>; VENDOR: <value>; BOOTR: <value>; SW_REV: <value>; MODEL: <value>''" Header "DESCRIPTION SNMP::Info::DocsisCM is a subclass of SNMP::Info that provides info about a given cable modem. Extracts data from the sysDescr, which is mandated in the DOCSIS specification to match HW_REV: <value>; VENDOR: <value>; BOOTR: <value>; SW_REV: <value>; MODEL: <value>"
Specio::TypeChecks(3)
Type checks used internally for Specio classes (it's not self-bootstrapping (yet?))
catalyst.pl(1), catalyst(1)
Bootstrap a Catalyst application
erl_boot_server(3)
Boot server for other Erlang machines
lxqt-leave(1)
Dialog to easily select logout, reboot, shutdown, suspend, hibernate, and lock screen
parse_test(1), boottool(1)
tool for modifying bootloader configuration
perlboot(1)
Links to information on object-oriented programming in Perl
script(4)
Boot script
ympd(1)
Standalone MPD Web GUI written in C, utilizing Websockets and Bootstrap/JS
home | help