Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3)
SNMP daemon loadable module interface
asn_get_header(3), asn_put_header(3), asn_put_temp_header(3), asn_commit_header(3), asn_get_integer_raw(3), asn_get_integer(3), asn_put_integer(3), asn_get_octetstring_raw(3), asn_get_octetstring(3), asn_put_octetstring(3), asn_get_null_raw(3), asn_get_null(3), asn_put_null(3), asn_put_exception(3), asn_get_objid_raw(3), asn_get_objid(3), asn_put_objid(3), asn_get_sequence(3), asn_get_ipaddress_raw(3), asn_get_ipaddress(3), asn_put_ipaddress(3), asn_get_uint32_raw(3), asn_put_uint32(3), asn_get_counter64_raw(3), asn_put_counter64(3), asn_get_timeticks(3), asn_put_timeticks(3), asn_skip(3), asn_slice_oid(3), asn_append_oid(3), asn_compare_oid(3), asn_is_suboid(3), asn_oid2str_r(3), asn_oid2str(3)
ASN.1 library for SNMP
inet6_opt_init(3), inet6_opt_append(3), inet6_opt_finish(3), inet6_opt_set_val(3), inet6_opt_next(3), inet6_opt_find(3), inet6_opt_get_val(3)
IPv6 Hop-by-Hop and Destination Options manipulation
inet6_option_space(3), inet6_option_init(3), inet6_option_append(3), inet6_option_alloc(3), inet6_option_next(3), inet6_option_find(3)
IPv6 Hop-by-Hop and Destination Option Manipulation
lsearch(3), lfind(3)
linear search and append
mdchain(9), md_initm(9), md_done(9), md_append_record(9), md_next_record(9), md_get_uint8(9), md_get_uint16(9), md_get_uint16be(9), md_get_uint16le(9), md_get_uint32(9), md_get_uint32be(9), md_get_uint32le(9), md_get_int64(9), md_get_int64be(9), md_get_int64le(9), md_get_mem(9), md_get_mbuf(9), md_get_uio(9)
set of functions to dissect an mbuf chain to various data types
nvlist_create(9), nvlist_destroy(9), nvlist_error(9), nvlist_set_error(9), nvlist_empty(9), nvlist_flags(9), nvlist_exists(9), nvlist_free(9), nvlist_clone(9), nvlist_dump(9), nvlist_fdump(9), nvlist_size(9), nvlist_pack(9), nvlist_unpack(9), nvlist_send(9), nvlist_recv(9), nvlist_xfer(9), nvlist_in_array(9), nvlist_next(9), nvlist_add(9), nvlist_move(9), nvlist_get(9), nvlist_take(9), nvlist_append(9)
library for name/value pairs
sglist(9), sglist_alloc(9), sglist_append(9), sglist_append_bio(9), sglist_append_mbuf(9), sglist_append_mbuf_epg(9), sglist_append_phys(9), sglist_append_sglist(9), sglist_append_single_mbuf(9), sglist_append_uio(9), sglist_append_user(9), sglist_append_vmpages(9), sglist_build(9), sglist_clone(9), sglist_consume_uio(9), sglist_count(9), sglist_count_mbuf_epg(9), sglist_count_vmpages(9), sglist_free(9), sglist_hold(9), sglist_init(9), sglist_join(9), sglist_length(9), sglist_reset(9), sglist_slice(9), sglist_split(9)
manage a scatter/gather list of physical memory addresses
snmp_client(3), snmp_client_init(3), snmp_client_set_host(3), snmp_client_set_port(3), snmp_send_cb_f(3), snmp_timeout_cb_f(3), snmp_timeout_start_f(3), snmp_timeout_stop_f(3), snmp_open(3), snmp_close(3), snmp_pdu_create(3), snmp_add_binding(3), snmp_pdu_check(3), snmp_pdu_send(3), snmp_oid_append(3), snmp_parse_server(3), snmp_receive(3), snmp_table_cb_f(3), snmp_table_fetch(3), snmp_table_fetch_async(3), snmp_dialog(3), snmp_discover_engine(3)
SNMP client library
sticky(7)
sticky text and append-only directories
unimsg(3), uni_msg_len(3), uni_msg_space(3), uni_msg_leading(3), uni_msg_size(3), uni_msg_ensure(3), uni_msg_append(3), uni_msg_extend(3), uni_msg_alloc(3), uni_msg_build(3), uni_msg_destroy(3), uni_msg_strip32(3), uni_msg_get32(3), uni_msg_append32(3), uni_msg_append8(3), uni_msg_trail32(3), uni_msg_dup(3)
ATM signalling library - message buffers
BIO_s_file(3), BIO_new_file(3), BIO_new_fp(3), BIO_set_fp(3), BIO_get_fp(3), BIO_read_filename(3), BIO_write_filename(3), BIO_append_filename(3), BIO_rw_filename(3)
FILE bio
BIO_s_file(3), BIO_new_file(3), BIO_new_fp(3), BIO_set_fp(3), BIO_get_fp(3), BIO_read_filename(3), BIO_write_filename(3), BIO_append_filename(3), BIO_rw_filename(3)
FILE bio
BIO_s_file(3ossl), BIO_new_file(3ossl), BIO_new_fp(3ossl), BIO_set_fp(3ossl), BIO_get_fp(3ossl), BIO_read_filename(3ossl), BIO_write_filename(3ossl), BIO_append_filename(3ossl), BIO_rw_filename(3ossl)
FILE bio
CURLOPT_APPEND(3)
append to the remote file
CURLOPT_PROXY_TRANSFER_MODE(3)
append FTP transfer mode to URL for proxy
DString.tcl86(3), Tcl_DStringInit(3), Tcl_DStringAppend(3), Tcl_DStringAppendElement(3), Tcl_DStringStartSublist(3), Tcl_DStringEndSublist(3), Tcl_DStringLength(3), Tcl_DStringValue(3), Tcl_DStringSetLength(3), Tcl_DStringTrunc(3), Tcl_DStringFree(3), Tcl_DStringResult(3), Tcl_DStringGetResult(3)
manipulate dynamic strings
DString.tcl87(3), Tcl_DStringInit(3), Tcl_DStringAppend(3), Tcl_DStringAppendElement(3), Tcl_DStringStartSublist(3), Tcl_DStringEndSublist(3), Tcl_DStringLength(3), Tcl_DStringValue(3), Tcl_DStringSetLength(3), Tcl_DStringTrunc(3), Tcl_DStringFree(3), Tcl_DStringResult(3), Tcl_DStringGetResult(3)
manipulate dynamic strings
Itcl_List(3), Itcl_InitList(3), Itcl_DeleteList(3), Itcl_CreateListElem(3), Itcl_DeleteListElem(3), Itcl_InsertList(3), Itcl_InsertListElem(3), Itcl_AppendList(3), Itcl_AppendListElem(3), Itcl_SetListValue(3)
Manipulate an Itcl list object
Mat_VarWriteAppend(3)
Writes/appends a MATLAB variable to an HDF5 format MATLAB MAT file
Tcl_AddErrorInfo.tcl85(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
retrieve or record information about errors and other return options
Tcl_AddErrorInfo.tcl86(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
retrieve or record information about errors and other return options
Tcl_AddErrorInfo.tcl87(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
retrieve or record information about errors and other return options
Tcl_AppendAllObjTypes.tcl85(3), Tcl_RegisterObjType(3), Tcl_GetObjType(3), Tcl_AppendAllObjTypes(3), Tcl_ConvertToType (3)
manipulate Tcl object types
Tcl_AppendAllObjTypes.tcl86(3), Tcl_RegisterObjType(3), Tcl_GetObjType(3), Tcl_AppendAllObjTypes(3), Tcl_ConvertToType (3)
manipulate Tcl value types
Tcl_AppendAllObjTypes.tcl87(3), Tcl_RegisterObjType(3), Tcl_GetObjType(3), Tcl_AppendAllObjTypes(3), Tcl_ConvertToType (3)
manipulate Tcl value types
Tcl_AppendElement.tcl85(3), Tcl_SetObjResult(3), Tcl_GetObjResult(3), Tcl_SetResult(3), Tcl_GetStringResult(3), Tcl_AppendResult(3), Tcl_AppendResultVA(3), Tcl_AppendElement(3), Tcl_ResetResult(3), Tcl_FreeResult(3)
manipulate Tcl result
Tcl_AppendElement.tcl86(3), Tcl_SetObjResult(3), Tcl_GetObjResult(3), Tcl_SetResult(3), Tcl_GetStringResult(3), Tcl_AppendResult(3), Tcl_AppendResultVA(3), Tcl_AppendElement(3), Tcl_ResetResult(3), Tcl_TransferResult(3), Tcl_FreeResult(3)
manipulate Tcl result
Tcl_AppendElement.tcl87(3), Tcl_SetObjResult(3), Tcl_GetObjResult(3), Tcl_SetResult(3), Tcl_GetStringResult(3), Tcl_AppendResult(3), Tcl_AppendResultVA(3), Tcl_AppendElement(3), Tcl_ResetResult(3), Tcl_TransferResult(3), Tcl_FreeResult(3)
manipulate Tcl result
Tcl_AppendExportList.tcl85(3), Tcl_AppendExportList(3), Tcl_CreateNamespace(3), Tcl_DeleteNamespace(3), Tcl_Export(3), Tcl_FindCommand(3), Tcl_FindNamespace(3), Tcl_ForgetImport(3), Tcl_GetCurrentNamespace(3), Tcl_GetGlobalNamespace(3), Tcl_GetNamespaceUnknownHandler(3), Tcl_Import(3), Tcl_SetNamespaceUnknownHandler(3)
manipulate namespaces
Tcl_AppendExportList.tcl86(3), Tcl_AppendExportList(3), Tcl_CreateNamespace(3), Tcl_DeleteNamespace(3), Tcl_Export(3), Tcl_FindCommand(3), Tcl_FindNamespace(3), Tcl_ForgetImport(3), Tcl_GetCurrentNamespace(3), Tcl_GetGlobalNamespace(3), Tcl_GetNamespaceUnknownHandler(3), Tcl_Import(3), Tcl_SetNamespaceUnknownHandler(3)
manipulate namespaces
Tcl_AppendExportList.tcl87(3), Tcl_AppendExportList(3), Tcl_CreateNamespace(3), Tcl_DeleteNamespace(3), Tcl_Export(3), Tcl_FindCommand(3), Tcl_FindNamespace(3), Tcl_ForgetImport(3), Tcl_GetCurrentNamespace(3), Tcl_GetGlobalNamespace(3), Tcl_GetNamespaceUnknownHandler(3), Tcl_Import(3), Tcl_SetNamespaceUnknownHandler(3)
manipulate namespaces
Tcl_AppendFormatToObj.tcl85(3), Tcl_NewStringObj(3), Tcl_NewUnicodeObj(3), Tcl_SetStringObj(3), Tcl_SetUnicodeObj(3), Tcl_GetStringFromObj(3), Tcl_GetString(3), Tcl_GetUnicodeFromObj(3), Tcl_GetUnicode(3), Tcl_GetUniChar(3), Tcl_GetCharLength(3), Tcl_GetRange(3), Tcl_AppendToObj(3), Tcl_AppendUnicodeToObj(3), Tcl_AppendObjToObj(3), Tcl_AppendStringsToObj(3), Tcl_AppendStringsToObjVA(3), Tcl_AppendLimitedToObj(3), Tcl_Format(3), Tcl_AppendFormatToObj(3), Tcl_ObjPrintf(3), Tcl_AppendPrintfToObj(3), Tcl_SetObjLength(3), Tcl_AttemptSetObjLength(3), Tcl_ConcatObj(3)
manipulate Tcl objects as strings
Tcl_AppendFormatToObj.tcl86(3), Tcl_NewStringObj(3), Tcl_NewUnicodeObj(3), Tcl_SetStringObj(3), Tcl_SetUnicodeObj(3), Tcl_GetStringFromObj(3), Tcl_GetString(3), Tcl_GetUnicodeFromObj(3), Tcl_GetUnicode(3), Tcl_GetUniChar(3), Tcl_GetCharLength(3), Tcl_GetRange(3), Tcl_AppendToObj(3), Tcl_AppendUnicodeToObj(3), Tcl_AppendObjToObj(3), Tcl_AppendStringsToObj(3), Tcl_AppendStringsToObjVA(3), Tcl_AppendLimitedToObj(3), Tcl_Format(3), Tcl_AppendFormatToObj(3), Tcl_ObjPrintf(3), Tcl_AppendPrintfToObj(3), Tcl_SetObjLength(3), Tcl_AttemptSetObjLength(3), Tcl_ConcatObj(3)
manipulate Tcl values as strings
Tcl_AppendFormatToObj.tcl87(3), Tcl_NewStringObj(3), Tcl_NewUnicodeObj(3), Tcl_SetStringObj(3), Tcl_SetUnicodeObj(3), Tcl_GetStringFromObj(3), Tcl_GetString(3), Tcl_GetUnicodeFromObj(3), Tcl_GetUnicode(3), Tcl_GetUniChar(3), Tcl_GetCharLength(3), Tcl_GetRange(3), Tcl_AppendToObj(3), Tcl_AppendUnicodeToObj(3), Tcl_AppendObjToObj(3), Tcl_AppendStringsToObj(3), Tcl_AppendStringsToObjVA(3), Tcl_AppendLimitedToObj(3), Tcl_Format(3), Tcl_AppendFormatToObj(3), Tcl_ObjPrintf(3), Tcl_AppendPrintfToObj(3), Tcl_SetObjLength(3), Tcl_AttemptSetObjLength(3), Tcl_ConcatObj(3)
manipulate Tcl values as strings
Tcl_DStringAppend.tcl85(3), Tcl_DStringInit(3), Tcl_DStringAppend(3), Tcl_DStringAppendElement(3), Tcl_DStringStartSublist(3), Tcl_DStringEndSublist(3), Tcl_DStringLength(3), Tcl_DStringValue(3), Tcl_DStringSetLength(3), Tcl_DStringTrunc(3), Tcl_DStringFree(3), Tcl_DStringResult(3), Tcl_DStringGetResult(3)
manipulate dynamic strings
Tcl_ListObjAppendElement.tcl85(3), Tcl_ListObjAppendList(3), Tcl_ListObjAppendElement(3), Tcl_NewListObj(3), Tcl_SetListObj(3), Tcl_ListObjGetElements(3), Tcl_ListObjLength(3), Tcl_ListObjIndex(3), Tcl_ListObjReplace(3)
manipulate Tcl objects as lists
Tcl_ListObjAppendElement.tcl86(3), Tcl_ListObjAppendList(3), Tcl_ListObjAppendElement(3), Tcl_NewListObj(3), Tcl_SetListObj(3), Tcl_ListObjGetElements(3), Tcl_ListObjLength(3), Tcl_ListObjIndex(3), Tcl_ListObjReplace(3)
manipulate Tcl values as lists
Tcl_ListObjAppendElement.tcl87(3), Tcl_ListObjAppendList(3), Tcl_ListObjAppendElement(3), Tcl_NewListObj(3), Tcl_SetListObj(3), Tcl_ListObjGetElements(3), Tcl_ListObjLength(3), Tcl_ListObjIndex(3), Tcl_ListObjReplace(3)
manipulate Tcl values as lists
Tk_ClipboardAppend.tk85(3), Tk_ClipboardClear(3), Tk_ClipboardAppend(3)
Manage the clipboard
Tk_ClipboardAppend.tk86(3), Tk_ClipboardClear(3), Tk_ClipboardAppend(3)
Manage the clipboard
XmCommandAppendValue(3)
A Command function that appends the passed XmString to the end of the string displayed in the command area of the widget "XmCommandAppendValue" "Command functions" "XmCommandAppendValue"
XmFontListAppendEntry(3)
A font list function that appends an entry to a font list "XmFontListAppendEntry" "font list functions" "XmFontListAppendEntry"
XmStringConcat(3)
A compound string function that appends one string to another "XmStringConcat" "compound string functions" "XmStringConcat"
XmStringConcatAndFree(3)
A compound string function that appends one string to another and frees the original strings "XmStringConcatAndFree" "compound string functions" "XmStringConcatAndFree"
XmStringNConcat(3)
A compound string function that appends a specified number of bytes to a compound string "XmStringNConcat" "compound string functions" "XmStringNConcat"
XmtMsgLineSet(3), XmtMsgLineSet()(3), XmtMsgLineAppend()(3), XmtMsgLinePrintf()(3), XmtMsgLineClear()(3)
display messages in an XmtMsgLine widget
al_append_menu_item(3)
Allegro 5 API
al_append_native_text_log(3)
Allegro 5 API
al_append_path_component(3)
Allegro 5 API
al_ustr_append(3)
Allegro 5 API
al_ustr_append_chr(3)
Allegro 5 API
al_ustr_append_cstr(3)
Allegro 5 API
al_ustr_appendf(3)
Allegro 5 API
al_ustr_vappendf(3)
Allegro 5 API
append.tcl85(n), append(n)
Append to variable
append.tcl86(n), append(n)
Append to variable
append.tcl87(n), append(n)
Append to variable
append_filename(3)
Concatenates a filename to a path. Allegro game programming library
cdappend(1)
Copy STDIN onto a CD-R(W)
curl_mime_addpart(3)
append a new empty part to a mime structure
curl_slist_append(3)
add a string to an slist
didump(8)
Diablo program to dump the dhistory database diload - Diablo program to append to the dhistory database
exexedat(3)
Appending datafiles onto your executable. Allegro game programming library
firestring_estr_0(3)
append a trailing nil to an estring
getdns_context_set_append_name(3)
getdns_context_set_context_update_callback, getdns_context_set_dns_root_servers, getdns_context_set_dns_transport, getdns_context_set_dnssec_trust_anchors, getdns_context_set_dnssec_allowed_skew, getdns_context_set_follow_redirects, getdns_context_set_limit_outstanding_queries, getdns_context_set_namespaces, getdns_context_set_resolution_type, getdns_context_set_suffix, getdns_context_set_timeout, -- getdns context manipulation routines n
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
allow the user to compose an input line
gnutls_buffer_append_data(3)
API function
gnutls_set_default_priority_append(3)
API function
lappend.tcl85(n), lappend(n)
Append list elements onto a variable
lappend.tcl86(n), lappend(n)
Append list elements onto a variable
lappend.tcl87(n), lappend(n)
Append list elements onto a variable
lbdb-fetchaddr(1)
grab addresses from mails add append them to lbdb database
libowfat_array_cat(3), array_cat(3)
append one array to another
libowfat_array_cat0(3), array_cat0(3)
append 0 byte to an array
libowfat_array_catb(3), array_catb(3)
append bytes to an array
libowfat_array_cate(3), array_cate(3)
append subset of one array to another array
libowfat_array_cats(3), array_cats(3)
append C string to an array
libowfat_array_cats0(3), array_cats0(3)
append C string to an array
libowfat_fmt_fill(3), fmt_fill(3)
append spaces to a string
libowfat_io_appendfile(3), io_appendfile(3)
open a file for appending
libowfat_open_append(3), open_append(3)
open a file for appending
libowfat_readclose_append(3), readclose_append(3)
read a whole file into a stralloc
libowfat_stralloc_0(3), stralloc_0(3)
append to a stralloc
libowfat_stralloc_append(3), stralloc_append(3)
append a character to a stralloc
libowfat_stralloc_cat(3), stralloc_cat(3)
append data to a stralloc
libowfat_stralloc_catb(3), stralloc_catb(3)
append data to a stralloc
libowfat_stralloc_catlong0(3), stralloc_catlong0(3)
append an integer to a stralloc
libowfat_stralloc_catm(3), stralloc_catm(3)
append string(s) to a stralloc
libowfat_stralloc_cats(3), stralloc_cats(3)
append data to a stralloc
libowfat_stralloc_catulong0(3), stralloc_catulong0(3)
append an integer to a stralloc
lizardfs-appendchunks(1)
lazy append chunks
lt-append(1)
combine two compiled dictionary transducers
memcached_append(3)
Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1
memcached_append_by_key(3)
Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1
memcached_prepend(3)
Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1
memcached_prepend_by_key(3)
Appending to or Prepending to data on the server rst2man-indent-level 0 1 rstReportMargin \$1
memcached_server_list_append(3)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
mksquashfs(1)
tool to create and append to squashfs filesystems
mmv(1)
move/copy/append/link multiple files by wildcard patterns } {
mtext_cat(3m17n)
Append an M-text to another
mtext_cat_char(3m17n)
Append a character to an M-text
mtext_ncat(3m17n)
Append a part of an M-text to another
multilog(8)
reads a sequence of lines from stdin and appends selected lines to any number of logs
ne_buffer_append(3), ne_buffer_zappend(3), ne_buffer_concat(3)
append data to a string buffer
pcap_dump_open(3), pcap_dump_open_append(3), pcap_dump_fopen(3)
open a file to which to write packets
pmemlog_append(3), pmemlog_append()(3), pmemlog_appendv()(3)
append bytes to the persistent memory resident log file
rcvpack(1)
append an email from standard input to a file
runsv(8)
starts and monitors a service and optionally an appendant log service
rwappend(1)
Append SiLK Flow file(s) to an existing SiLK Flow file
rwflowappend(8)
Append incremental SiLK Flow files to hourly files
tar_append_file(3), tar_append_eof(3), tar_append_regfile(3)
append data to tar archives
tar_extract_all(3), tar_extract_glob(3), tar_append_tree(3)
high-level tar archive manipulation functions
tclgeomap(3), Tclgeomap_Init(3), Tclgeomap_NewGeoPtObj(3), Tclgeomap_SetGeoPtObj(3), Tclgeomap_GetGeoPtFromObj(3), Tclgeomap_NewMapPtObj(3), Tclgeomap_SetMapPtObj(3), Tclgeomap_GetMapPtFromObj(3), Tclgeomap_JulDayToList(3), Tclgeomap_AppendTime(3), Tclgeomap_GetProj(3), Tclgeomap_ProjName(3), Tclgeomap_AddProjUpdateTask(3), Tclgeomap_CnxProjUpdateTask(3), Tclgeomap_AddProjDeleteTask(3), Tclgeomap_CnxProjDeleteTask(3), Tclgeomap_AddLnArr(3), Tclgeomap_GetLnArr(3), Tclgeomap_LnArrName(3), Tclgeomap_AddLnArrDeleteTask(3), Tclgeomap_CnxLnArrDeleteTask(3), Tclgeomap_LnArrToMap(3), Tclgeomap_AddPlaceUpdateTask(3), Tclgeomap_CnxPlaceUpdateTask(3), Tclgeomap_AddPlaceDeleteTask(3), Tclgeomap_CnxPlaceDeleteTask(3), Tclgeomap_GetPlace(3), Tclgeomap_PlaceLoc(3), Tclgeomap_PlaceName(3)
C API for manipulating geographic data in Tcl
tifmerge(3), TiffAppend(3)
tifmerge library function manual page
vc(3), vc_new(3), vc_delete vc_set_group(3), vc_set_name(3), vc_set_param(3), vc_set_value(3), vc_link(3), vc_append_with_name(3), vc_is_preferred(3), vc_get_preferred_tel(3), vc_get_preferred_email(3), vc_get_group(3), vc_get_name(3), vc_get_param(3), vc_get_value(3), vc_param_new(3), vc_param_set_name(3), vc_param_set_value(3), vc_param_set_str(3), vc_param_link(3), vc_param_get_name(3), vc_param_get_value(3), vc_get_next(3), vc_get_next_by_name(3), vc_param_get_next(3), vc_param_get_by_name(3), vc_param_get_next_by_name(3), vc_delete(3), vc_delete_deep(3), vc_param_delete(3), vc_param_delete_deep(3), fprintf_vc_component_param(3), fprintf_vc_component(3), fprintf_vcard(3), parse_vcard_file(3), count_vcards(3), get_val_struct_part(3)
vCard library
wimcapture(1), wimappend(1)
Capture or append a WIM image
xlito(1), xlito (XLoadImageTrailingOptions)(1)
Append/Delete/Show a Trailing Option string in a file
Catalyst::Manual::Tutorial::10_Appendices(3)
Catalyst Tutorial - Chapter 10: Appendices
DtEditorAppend(3)
append data to a DtEditor widget
DtEditorAppendFromFile(3)
append data from a file into a DtEditor widget
File::Append::TempFile(3)
Perl extension for appending data to files
HTTP::Engine::Middleware::DoCoMoGUID(3)
append guid=ON on each anchor tag and form action
Image::MetaData::JPEG::MakerNotes(3)
This document contains random information and details on MakerNotes; it is an appendix to the main manual page of the Image::MetaData::JPEG module, which the reader should refer to for further details and the general scope. The note on MakerNote parsing in the main manual page is of particular interest
Image::MetaData::JPEG::Structures(3)
This document describes the structure of a JPEG file; it is an appendix to the main manual page of the Image::MetaData::JPEG module, which the reader should refer to for further details and the general scope
Image::MetaData::JPEG::TagLists(3)
This document contains a collection of tag tables for JPEG segments; it is an appendix to the main manual page of the Image::MetaData::JPEG module, which the reader should refer to for further details and the general scope
Jifty::Plugin::TestServerWarnings::Appender(3)
Log appender
Log::Log4perl::Appender(3)
Log appender class
Log::Log4perl::Appender::Buffer(3)
Buffering Appender
Log::Log4perl::Appender::DBI(3)
implements appending to a DB
Log::Log4perl::Appender::File(3)
Log to file
Log::Log4perl::Appender::Limit(3)
Limit message delivery via block period
Log::Log4perl::Appender::RRDs(3)
Log to a RRDtool Archive
Log::Log4perl::Appender::RabbitMQ(3)
Log to RabbitMQ
Log::Log4perl::Appender::Screen(3)
Log to STDOUT/STDERR
Log::Log4perl::Appender::ScreenColoredLevels(3)
Colorize messages according to level
Log::Log4perl::Appender::Socket(3)
Log to a socket
Log::Log4perl::Appender::Socket::UNIX(3), Log::Log4perl::Appender::Socket::UNIX-(3)
Log to a Unix Domain Socket
Log::Log4perl::Appender::String(3)
Append to a string
Log::Log4perl::Appender::Synchronized(3)
Synchronizing other appenders
Log::Log4perl::Appender::TestArrayBuffer(3)
Subclass of Appender::TestBuffer
Log::Log4perl::Appender::TestBuffer(3)
Appender class for testing
Log::Log4perl::Appender::TestFileCreeper(3)
Intentionally slow test appender
Log::Log4perl::JavaMap(3)
maps java log4j appenders to Log::Dispatch classes
Log::Log4perl::JavaMap::ConsoleAppender(3)
wraps Log::Dispatch::Screen
Log::Log4perl::JavaMap::FileAppender(3)
wraps Log::Dispatch::File
Log::Log4perl::JavaMap::JDBCAppender(3)
wraps Log::Log4perl::Appender::DBI
Log::Log4perl::JavaMap::NTEventLogAppender(3)
wraps Log::Dispatch::Win32EventLog
Log::Log4perl::JavaMap::RollingFileAppender(3)
wraps Log::Dispatch::FileRotate
Log::Log4perl::JavaMap::SyslogAppender(3), Log::Log4perl::JavaMap::SysLogAppender(3)
wraps Log::Dispatch::Syslog
Log::Log4perl::JavaMap::TestBuffer(3)
wraps Log::Log4perl::Appender::TestBuffer
Memcached::libmemcached::memcached_server_st(3), memcached_server_list_free(3), memcached_server_list_append(3), memcached_server_list_count(3), memcached_servers_parse(3)
Manage server list
MojoMojo::Formatter::Markdown(3)
MultiMarkdown formatting for your content. MultiMarkdown is an extension of Markdown, adding support for tables, footnotes, bibliography, automatic cross-references, glossaries, appendices, definition lists, math syntax, anchor and image attributes, and document metadata. Markdown syntax: <http://daringfireball.net/projects/markdown/syntax> MultiMarkdown syntax: <http://fletcherpenney.net/multimarkdown/users_guide/multimarkdown_syntax_guide/>
OpenXPKI::Server::Log::Appender::Audit(3), Header(3)
"Name" OpenXPKI::Server::Log::Appender::Audit
OpenXPKI::Server::Log::Appender::Database(3), Header(3)
"Name" OpenXPKI::Server::Log::Appender::Database
OpenXPKI::Server::Workflow::Activity::Tools::AppendCertificateMetadata(3), Header(3)
"Name" OpenXPKI::Server::Workflow::Activity::Tools::AppendCertificateMetadata
Text::Pipe::Append(3)
Pipe segment that appends text to input
Unicode::Stringprep::BiDi(3)
Tables from RFC 3454, Appendix D
Unicode::Stringprep::Mapping(3)
Tables from RFC 3454, Appendix B
Unicode::Stringprep::Prohibited(3)
Tables from RFC 3454, Appendix C
Unicode::Stringprep::Unassigned(3)
Tables from RFC 3454, Appendix A
appendpdf.pl(1)
Append one PDF to another
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account show_account Display account details --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications options: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA. When used in combination with the (ga-v(ga option, the challenge URLs or FQDNs and their expected return values are shown. (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --issuance-timeout ISSUANCE_TIMEOUT This option specifies how long (in seconds) Certbot will wait for the server to issue a certificate. (default: 90) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.26.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --new-key When renewing or replacing a certificate, generate a new private key, even if --reuse-key is set on the existing certificate. Combining --new-key and --reuse- key will result in the private key being replaced and then reused in future renewals. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must-Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. show_account: Options useful for the "show_account" subcommand: plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
fido_cred_exclude(3)
appends a credential ID to a credential's list of excluded credentials
prj_add(nged)
Appends information to the specified shaderfile
rsub(1)
substitute lines in a file or append if not found
string(3), s_alloc(3), s_append(3), s_array(3), s_copy(3), s_error(3), s_free(3), s_incref(3), s_memappend(3), s_nappend(3), s_new(3), s_newalloc(3), s_parse(3), s_reset(3), s_restart(3), s_terminate(3), s_tolower(3), s_putc(3), s_unique(3), s_grow(3), s_read(3), s_read_line(3), s_getline(3), s_allocinstack(3), s_freeinstack(3), s_rdinstack(3)
extensible strings
tickit_utf8_put(3)
append a UTF-8 encoded codepoint to a buffer
venti-packet(3), Packet(3), packetalloc(3), packetappend(3), packetasize(3), packetcmp(3), packetconcat(3), packetconsume(3), packetcopy(3), packetdup(3), packetforeign(3), packetfragments(3), packetfree(3), packetheader(3), packetpeek(3), packetprefix(3), packetsha1(3), packetsize(3), packetsplit(3), packetstats(3), packettrailer(3), packettrim(3)
zero-copy network buffers
home | help