Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
adjkerntz(8)
adjust the local time CMOS clock to reflect time zone changes and keep the current timezone offset for the kernel
bus_adjust_resource(9)
adjust resource allocated from a parent bus
ng_tcpmss(4)
netgraph node to adjust TCP MSS option
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
PCI bus interface
rman(9), rman_activate_resource(9), rman_adjust_resource(9), rman_deactivate_resource(9), rman_fini(9), rman_init(9), rman_init_from_resource(9), rman_is_region_manager(9), rman_manage_region(9), rman_first_free_region(9), rman_last_free_region(9), rman_release_resource(9), rman_reserve_resource(9), rman_reserve_resource_bound(9), rman_make_alignment_flags(9), rman_get_start(9), rman_get_end(9), rman_get_device(9), rman_get_size(9), rman_get_flags(9), rman_set_mapping(9), rman_get_mapping(9), rman_set_virtual(9), rman_get_virtual(9), rman_set_bustag(9), rman_get_bustag(9), rman_set_bushandle(9), rman_get_bushandle(9), rman_set_rid(9), rman_get_rid(9)
resource management functions
scalbln(3), scalblnf(3), scalblnl(3), scalbn(3), scalbnf(3), scalbnl(3)
adjust exponent
CVAIRS(1)
Example of Credit Value Adjustment for Interest Rate Swap
SDL_SetAlpha(3)
Adjust the alpha properties of a surface
Tk_MoveToplevelWindow.tk85(3), Tk_MoveToplevelWindow(3)
Adjust the position of a top-level window
Tk_MoveToplevelWindow.tk86(3), Tk_MoveToplevelWindow(3)
Adjust the position of a top-level window
XcmsSetWhitePoint(3), XcmsSetWhiteAdjustProc(3)
modifying CCC attributes
adjust_sample(3)
Alters the parameters of a sample while it is playing. Allegro game programming library
aumeta(1)
move seek index and adjust metadata of audio files
aumix(1)
adjust audio mixer
aupanel(1)
allows user adjustment of Network Audio System device attributes aupanel#(1) "" "aupanel(1)"
avisync(1)
adjust audio synchronisation
clockadd(1)
adjust the local UNIX clock, once
clockview(1)
view an adjustment to the local clock
exiftime(1)
display or adjust date & time Exif tags; list files ordered by their Exif date & time tags
fcft_size_adjust(3)
increase or decrease a font's point size
git-annex-adjust(1)
enter an adjusted branch
gui_font_baseline(3)
Adjusts the keyboard shortcut underscores height. Allegro game programming library
lart(1)
Luser Attitude Readjustment Tool - use a lart to adjust lusers' attitudes
libssh2_channel_receive_window_adjust(3)
adjust the channel window
libssh2_channel_receive_window_adjust2(3)
adjust the channel window
normalize(1)
adjusts volume levels of audio files
normalize-mp3(1)
adjust levels of mp3 or ogg files by running normalize(1), then re-encoding
pnmgamma(1)
perform gamma adjustment on a PNM image synopsis
roundrdsrec(3)
adjusts a rectangle to lambda grid step man1/alc_origin.1
setmclk(1)
adjust the memory timing of certain Cirrus cards
soldout_array(3), arr_adjust(3), arr_free(3), arr_grow(3), arr_init(3), arr_insert(3), arr_item(3), arr_newitem(3), arr_remove(3), arr_sorted_find(3), arr_sorted_find_i(3), parr_adjust(3), parr_free(3), parr_grow(3), parr_init(3), parr_insert(3), parr_pop(3), parr_push(3), parr_remove(3), parr_sorted_find(3), parr_sorted_find_i(3), parr_top(3)
array handling functions for soldout
timew-fill(1)
adjust intervals to fill in surrounding gaps
tpm2_clockrateadjust(1), tpm2_clockrateadjust(1)(1)
Sets the clock rate period on the TPM
tune2fs(8)
adjust tunable file system parameters on ext2/ext3/ext4 file systems
umix(1)
adjust soundcard mixers
unflatten(1)
adjust directed graphs to improve layout aspect ratio
voice_set_playmode(3)
Adjusts the loop status of the specified voice. Allegro game programming library
wlsunset(1), wlsunet(1)
Day/night gamma adjustments for Wayland compositors supporting wlr-gamma-control-unstable-v1
xbacklight(1)
adjust backlight brightness using RandR extension
xbrightness(1)
Adjust a monitor's brightness for XFree86
ExtUtils::MM(3)
OS adjusted ExtUtils::MakeMaker subclass
File::Flock::Forking(3), File::Flock::Forking(3)
adjust File::Flock to handle fork()
Gtk2::Adjustment(3)
wrapper for GtkAdjustment
Paws::AutoScaling::DescribeAdjustmentTypes(3)
Arguments for method DescribeAdjustmentTypes on Paws::AutoScaling
Tickit::Widget::HSplit(3), "Tickit::Widget::HSplit"(3)
an adjustable horizontal split between two widgets
Tickit::Widget::VSplit(3), "Tickit::Widget::VSplit"(3)
an adjustable vertical split between two widgets
Tickit::WidgetRole::Alignable(3), "Tickit::WidgetRole::Alignable"(3)
implement widgets with adjustable alignment
Time::Moment::Adjusters(3)
Adjusters for Time::Moment
Time::Moment::Role::TimeZone(3)
Adjust Time::Moment with time zone objects
Tk::Adjuster(3)
Allow size of packed widgets to be adjusted by user
fish-completions(1)
Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
lookat(nged)
Adjusts the current view in MGED such that the eye is looking in the direction of the given coordinates, but does not move the eye point nor change the view size
qvrot(nged)
Adjusts the current MGED viewing direction such that the eye is positioned along the direction vector (dx dy dz) from the view center and is looking towards the view center
tickit_pen_ref(3), tickit_pen_unref(3)
adjust the refcount of a pen
tickit_ref(3), tickit_unref(3)
adjust the refcount of the toplevel instance
tickit_renderbuffer_ref(3), tickit_renderbuffer_unref(3)
adjust the refcount of a render buffer
tickit_string_ref(3), tickit_string_unref(3)
adjust the refcount of a counted string
tickit_term_ref(3), tickit_term_unref(3)
adjust the refcount of a terminal
tickit_window_ref(3), tickit_window_unref(3)
adjust the refcount of a window
home | help