Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3)
SNMP daemon loadable module interface
bus_activate_resource(9), bus_deactivate_resource(9)
activate or deactivate a resource
callout_active(9), callout_deactivate(9), callout_async_drain(9), callout_drain(9), callout_init(9), callout_init_mtx(9), callout_init_rm(9), callout_init_rw(9), callout_pending(9), callout_reset(9), callout_reset_curcpu(9), callout_reset_on(9), callout_reset_sbt(9), callout_reset_sbt_curcpu(9), callout_reset_sbt_on(9), callout_schedule(9), callout_schedule_curcpu(9), callout_schedule_on(9), callout_schedule_sbt(9), callout_schedule_sbt_curcpu(9), callout_schedule_sbt_on(9), callout_stop(9), callout_when(9)
execute a function after a specified length of time
activate a capture handle
check whether monitor mode can be set for a not-yet-activated capture handle
set the buffer size for a not-yet-activated capture handle
set promiscuous mode for a not-yet-activated capture handle
set monitor mode for a not-yet-activated capture handle
set the snapshot length for a not-yet-activated capture handle
set the packet buffer timeout for a not-yet-activated capture handle
activate a physical map
rman(9), rman_activate_resource(9), rman_adjust_resource(9), rman_deactivate_resource(9), rman_fini(9), rman_init(9), rman_init_from_resource(9), rman_is_region_manager(9), rman_manage_region(9), rman_first_free_region(9), rman_last_free_region(9), rman_release_resource(9), rman_reserve_resource(9), rman_reserve_resource_bound(9), rman_make_alignment_flags(9), rman_get_start(9), rman_get_end(9), rman_get_device(9), rman_get_size(9), rman_get_flags(9), rman_set_mapping(9), rman_get_mapping(9), rman_set_virtual(9), rman_get_virtual(9), rman_set_bustag(9), rman_get_bustag(9), rman_set_bushandle(9), rman_get_bushandle(9), rman_set_rid(9), rman_get_rid(9)
resource management functions
deactivate a page
activates 3D-Desktop, a 3D desktop switcher
XSetScreenSaver(3), XForceScreenSaver(3), XActivateScreenSaver(3), XResetScreenSaver(3), XGetScreenSaver(3)
manipulate the screen saver
A VendorShell function that activates a protocol "XmActivateProtocol" "VendorShell functions" "XmActivateProtocol" "protocols"
A VendorShell convenience interface that activates a protocol "XmActivateWMProtocol" "VendorShell functions" "XmActivateWMProtocol" "protocols"
A VendorShell function that deactivates a protocol without removing it "XmDeactivateProtocol" "protocols" "VendorShell functions" "XmDeactivateProtocol"
A VendorShell convenience interface that deactivates a protocol without removing it "protocols" "XmDeactivateWMProtocol" "VendorShell functions" "XmDeactivateWMProtocol"
Synchronously activates the expose method of a widget to draw its content
XmtMenuActivateProcedure(3), XmtMenuActivateProcedure()(3), XmtMenuInactivateProcedure()(3)
sensitize and desensitize menu items depending on the procedures they call
activateCDKAlphalist(3), activateCDKAlphalist destroyCDKAlphalist drawCDKAlphalist eraseCDKAlphalist getCDKAlphalistBox getCDKAlphalistContents getCDKAlphalistCurrentItem getCDKAlphalistFillerChar getCDKAlphalistHighlight injectCDKAlphalist moveCDKAlphalist newCDKAlphalist positionCDKAlphalist setCDKAlphalist setCDKAlphalistBackgroundAttrib setCDKAlphalistBackgroundColor setCDKAlphalistBox setCDKAlphalistBoxAttribute setCDKAlphalistContents setCDKAlphalistCurrentItem setCDKAlphalistFillerChar setCDKAlphalistHighlight setCDKAlphalistHorizontalChar setCDKAlphalistLLChar setCDKAlphalistLRChar setCDKAlphalistPostProcess setCDKAlphalistPreProcess setCDKAlphalistULChar setCDKAlphalistURChar setCDKAlphalistVerticalChar cdk_alphalist(3)
curses sorted list widget
activateCDKButton(3), activateCDKButton destroyCDKButton drawCDKButton eraseCDKButton getCDKButtonBox getCDKButtonMessage injectCDKButton moveCDKButton newCDKButton positionCDKButton setCDKButton setCDKButtonBackgroundAttrib setCDKButtonBackgroundColor setCDKButtonBox setCDKButtonBoxAttribute setCDKButtonHorizontalChar setCDKButtonLLChar setCDKButtonLRChar setCDKButtonMessage setCDKButtonULChar setCDKButtonURChar setCDKButtonVerticalChar cdk_button(3)
create and manage a curses button widget
activateCDKButtonbox(3), activateCDKButtonbox destroyCDKButtonbox drawCDKButtonbox drawCDKButtonboxButtons eraseCDKButtonbox getCDKButtonboxBox getCDKButtonboxButtonCount getCDKButtonboxCurrentButton getCDKButtonboxHighlight injectCDKButtonbox moveCDKButtonbox newCDKButtonbox positionCDKButtonbox setCDKButtonbox setCDKButtonboxBackgroundAttrib setCDKButtonboxBackgroundColor setCDKButtonboxBox setCDKButtonboxBoxAttribute setCDKButtonboxCurrentButton setCDKButtonboxHighlight setCDKButtonboxHorizontalChar setCDKButtonboxLLChar setCDKButtonboxLRChar setCDKButtonboxPostProcess setCDKButtonboxPreProcess setCDKButtonboxULChar setCDKButtonboxURChar setCDKButtonboxVerticalChar cdk_buttonbox(3)
Creates a managed curses buttonbox widget
activateCDKCalendar(3), activateCDKCalendar destroyCDKCalendar drawCDKCalendar eraseCDKCalendar getCDKCalendarBox getCDKCalendarDate getCDKCalendarDayAttribute getCDKCalendarHighlight getCDKCalendarMarker getCDKCalendarMonthAttribute getCDKCalendarYearAttribute injectCDKCalendar moveCDKCalendar newCDKCalendar positionCDKCalendar removeCDKCalendarMarker setCDKCalendar setCDKCalendarBackgroundAttrib setCDKCalendarBackgroundColor setCDKCalendarBox setCDKCalendarBoxAttribute setCDKCalendarDate setCDKCalendarDayAttribute setCDKCalendarDaysNames setCDKCalendarHighlight setCDKCalendarHorizontalChar setCDKCalendarLLChar setCDKCalendarLRChar setCDKCalendarMarker setCDKCalendarMonthAttribute setCDKCalendarMonthsNames setCDKCalendarPostProcess setCDKCalendarPreProcess setCDKCalendarULChar setCDKCalendarURChar setCDKCalendarVerticalChar setCDKCalendarYearAttribute cdk_calendar(3)
curses calendar widget
activateCDKDScale(3), activateCDKDScale destroyCDKDScale drawCDKDScale eraseCDKDScale getCDKDScaleBox getCDKDScaleDigits getCDKDScaleHighValue getCDKDScaleLowValue getCDKDScaleValue injectCDKDScale moveCDKDScale newCDKDScale positionCDKDScale setCDKDScale setCDKDScaleBackgroundAttrib setCDKDScaleBackgroundColor setCDKDScaleBox setCDKDScaleBoxAttribute setCDKDScaleDigits setCDKDScaleHorizontalChar setCDKDScaleLLChar setCDKDScaleLRChar setCDKDScaleLowHigh setCDKDScalePostProcess setCDKDScalePreProcess setCDKDScaleULChar setCDKDScaleURChar setCDKDScaleValue setCDKDScaleVerticalChar cdk_dscale(3)
curses scale widget (type double)
activateCDKDialog(3), activateCDKDialog destroyCDKDialog drawCDKDialog drawCDKDialogButtons eraseCDKDialog getCDKDialog getCDKDialogBox getCDKDialogHighlight getCDKDialogSeparator injectCDKDialog moveCDKDialog newCDKDialog positionCDKDialog setCDKDialog setCDKDialogBackgroundAttrib setCDKDialogBackgroundColor setCDKDialogBox setCDKDialogBox setCDKDialogBoxAttribute setCDKDialogHighlight setCDKDialogHorizontalChar setCDKDialogLLChar setCDKDialogLRChar setCDKDialogPostProcess setCDKDialogPreProcess setCDKDialogSeparator setCDKDialogULChar setCDKDialogURChar setCDKDialogVerticalChar cdk_dialog(3)
curses dialog widget
activateCDKEntry(3), activateCDKEntry cleanCDKEntry destroyCDKEntry drawCDKEntry eraseCDKEntry getCDKEntryBox getCDKEntryFillerChar getCDKEntryHiddenChar getCDKEntryMax getCDKEntryMin getCDKEntryValue injectCDKEntry moveCDKEntry newCDKEntry positionCDKEntry setCDKEntry setCDKEntryBackgroundAttrib setCDKEntryBackgroundColor setCDKEntryBox setCDKEntryBoxAttribute setCDKEntryCB setCDKEntryFillerChar setCDKEntryHiddenChar setCDKEntryHighlight setCDKEntryHorizontalChar setCDKEntryLLChar setCDKEntryLRChar setCDKEntryMax setCDKEntryMin setCDKEntryPostProcess setCDKEntryPreProcess setCDKEntryULChar setCDKEntryURChar setCDKEntryValue setCDKEntryVerticalChar cdk_entry(3)
curses text-entry widget
activateCDKFScale(3), activateCDKFScale destroyCDKFScale drawCDKFScale eraseCDKFScale getCDKFScaleBox getCDKFScaleDigits getCDKFScaleHighValue getCDKFScaleLowValue getCDKFScaleValue injectCDKFScale moveCDKFScale newCDKFScale positionCDKFScale setCDKFScale setCDKFScaleBackgroundAttrib setCDKFScaleBackgroundColor setCDKFScaleBox setCDKFScaleBoxAttribute setCDKFScaleDigits setCDKFScaleHorizontalChar setCDKFScaleLLChar setCDKFScaleLRChar setCDKFScaleLowHigh setCDKFScalePostProcess setCDKFScalePreProcess setCDKFScaleULChar setCDKFScaleURChar setCDKFScaleValue setCDKFScaleVerticalChar cdk_fscale(3)
curses scale widget (type float)
activateCDKFSlider(3), activateCDKFSlider destroyCDKFSlider drawCDKFSlider eraseCDKFSlider getCDKFSliderBox getCDKFSliderDigits getCDKFSliderHighValue getCDKFSliderLowValue getCDKFSliderValue injectCDKFSlider moveCDKFSlider newCDKFSlider positionCDKFSlider setCDKFSlider setCDKFSliderBackgroundAttrib setCDKFSliderBackgroundColor setCDKFSliderBox setCDKFSliderBoxAttribute setCDKFSliderDigits setCDKFSliderHorizontalChar setCDKFSliderLLChar setCDKFSliderLRChar setCDKFSliderLowHigh setCDKFSliderPostProcess setCDKFSliderPreProcess setCDKFSliderULChar setCDKFSliderURChar setCDKFSliderValue setCDKFSliderVerticalChar cdk_fslider(3)
curses slider widget (type float)
activateCDKFselect(3), activateCDKFselect deleteFileCB destroyCDKFselect drawCDKFselect eraseCDKFselect getCDKFselectBox getCDKFselectContents getCDKFselectCurrentItem getCDKFselectDirAttribute getCDKFselectDirContents getCDKFselectDirectory getCDKFselectFileAttribute getCDKFselectFillerChar getCDKFselectHighlight getCDKFselectLinkAttribute getCDKFselectSocketAttribute injectCDKFselect moveCDKFselect newCDKFselect positionCDKFselect setCDKFselect setCDKFselectBackgroundAttrib setCDKFselectBackgroundColor setCDKFselectBox setCDKFselectBoxAttribute setCDKFselectContents setCDKFselectCurrentItem setCDKFselectDirAttribute setCDKFselectDirContents setCDKFselectDirectory setCDKFselectFileAttribute setCDKFselectFillerChar setCDKFselectHighlight setCDKFselectHorizontalChar setCDKFselectLLChar setCDKFselectLRChar setCDKFselectLinkAttribute setCDKFselectSocketAttribute setCDKFselectULChar setCDKFselectURChar setCDKFselectVerticalChar cdk_fselect(3)
curses file selector widget
activateCDKGraph(3), activateCDKGraph destroyCDKGraph drawCDKGraph eraseCDKGraph getCDKGraphBox getCDKGraphCharacter getCDKGraphCharacters getCDKGraphDisplayType getCDKGraphValue getCDKGraphValues moveCDKGraph newCDKGraph positionCDKGraph setCDKGraph setCDKGraphBackgroundAttrib setCDKGraphBackgroundColor setCDKGraphBox setCDKGraphBoxAttribute setCDKGraphCharacter setCDKGraphCharacters setCDKGraphDisplayType setCDKGraphHorizontalChar setCDKGraphLLChar setCDKGraphLRChar setCDKGraphULChar setCDKGraphURChar setCDKGraphValue setCDKGraphValues setCDKGraphVerticalChar cdk_graph(3)
curses graph widget
activateCDKHistogram(3), activateCDKHistogram destroyCDKHistogram drawCDKHistogram eraseCDKHistogram getCDKHistogramBox getCDKHistogramFillerChar getCDKHistogramHighValue getCDKHistogramLowValue getCDKHistogramStatsAttr getCDKHistogramStatsPos getCDKHistogramValue getCDKHistogramViewType moveCDKHistogram newCDKHistogram positionCDKHistogram setCDKHistogram setCDKHistogramBackgroundAttrib setCDKHistogramBackgroundColor setCDKHistogramBox setCDKHistogramBoxAttribute setCDKHistogramDisplayType setCDKHistogramFillerChar setCDKHistogramHorizontalChar setCDKHistogramLLChar setCDKHistogramLRChar setCDKHistogramStatsAttr setCDKHistogramStatsPos setCDKHistogramULChar setCDKHistogramURChar setCDKHistogramValue setCDKHistogramVerticalChar setCDKHistogramViewType cdk_histogram(3)
curses histogram widget
activateCDKItemlist(3), activateCDKItemlist destroyCDKItemlist drawCDKItemlist drawCDKItemlistField eraseCDKItemlist getCDKItemlistBox getCDKItemlistCurrentItem getCDKItemlistDefaultItem getCDKItemlistValues injectCDKItemlist moveCDKItemlist newCDKItemlist positionCDKItemlist setCDKItemlist setCDKItemlistBackgroundAttrib setCDKItemlistBackgroundColor setCDKItemlistBox setCDKItemlistBoxAttribute setCDKItemlistCurrentItem setCDKItemlistDefaultItem setCDKItemlistHorizontalChar setCDKItemlistLLChar setCDKItemlistLRChar setCDKItemlistPostProcess setCDKItemlistPreProcess setCDKItemlistULChar setCDKItemlistURChar setCDKItemlistValues setCDKItemlistVerticalChar cdk_itemlist(3)
curses itemlist widget
activateCDKLabel(3), activateCDKLabel destroyCDKLabel drawCDKLabel eraseCDKLabel getCDKLabelBox getCDKLabelMessage moveCDKLabel newCDKLabel positionCDKLabel setCDKLabel setCDKLabelBackgroundAttrib setCDKLabelBackgroundColor setCDKLabelBox setCDKLabelBoxAttribute setCDKLabelHorizontalChar setCDKLabelLLChar setCDKLabelLRChar setCDKLabelMessage setCDKLabelULChar setCDKLabelURChar setCDKLabelVerticalChar waitCDKLabel cdk_label(3)
Creates a managed curses label widget
activateCDKMarquee(3), activateCDKMarquee deactivateCDKMarquee destroyCDKMarquee drawCDKMarquee eraseCDKMarquee getCDKMarqueeBox moveCDKMarquee newCDKMarquee positionCDKMarquee setCDKMarqueeBackgroundAttrib setCDKMarqueeBackgroundColor setCDKMarqueeBox setCDKMarqueeBoxAttribute setCDKMarqueeHorizontalChar setCDKMarqueeLLChar setCDKMarqueeLRChar setCDKMarqueeULChar setCDKMarqueeURChar setCDKMarqueeVerticalChar cdk_marquee(3)
curses marquee widget
activateCDKMatrix(3), activateCDKMatrix cleanCDKMatrix cleanCDKMatrixCell destroyCDKMatrix drawCDKMatrix eraseCDKMatrix getCDKMatrixBox getCDKMatrixCell getCDKMatrixCol getCDKMatrixRow injectCDKMatrix jumpToCell moveToCDKMatrixCell newCDKMatrix setCDKMatrix setCDKMatrixBackgroundAttrib setCDKMatrixBackgroundColor setCDKMatrixBox setCDKMatrixBoxAttribute setCDKMatrixCB setCDKMatrixCell setCDKMatrixCells setCDKMatrixHorizontalChar setCDKMatrixLLChar setCDKMatrixLRChar setCDKMatrixPostProcess setCDKMatrixPreProcess setCDKMatrixULChar setCDKMatrixURChar setCDKMatrixVerticalChar cdk_matrix(3)
curses matrix widget
activateCDKMentry(3), activateCDKMentry cleanCDKMentry destroyCDKMentry drawCDKMentry drawCDKMentryField eraseCDKMentry getCDKMentryBox getCDKMentryFillerChar getCDKMentryHiddenChar getCDKMentryMin getCDKMentryValue injectCDKMentry moveCDKMentry newCDKMentry positionCDKMentry setCDKMentry setCDKMentryBackgroundAttrib setCDKMentryBackgroundColor setCDKMentryBox setCDKMentryBoxAttribute setCDKMentryCB setCDKMentryFillerChar setCDKMentryHiddenChar setCDKMentryHorizontalChar setCDKMentryLLChar setCDKMentryLRChar setCDKMentryMin setCDKMentryPostProcess setCDKMentryPreProcess setCDKMentryULChar setCDKMentryURChar setCDKMentryValue setCDKMentryVerticalChar cdk_mentry(3)
curses multiple line entry widget
activateCDKMenu(3), activateCDKMenu destroyCDKMenu drawCDKMenu drawCDKMenuSubwin eraseCDKMenu eraseCDKMenuSubwin getCDKMenuCurrentItem getCDKMenuSubTitleHighlight getCDKMenuTitleHighlight injectCDKMenu newCDKMenu setCDKMenu setCDKMenuBackgroundAttrib setCDKMenuBackgroundColor setCDKMenuCurrentItem setCDKMenuPostProcess setCDKMenuPreProcess setCDKMenuSubTitleHighlight setCDKMenuTitleHighlight cdk_menu(3)
curses menu widget
activateCDKRadio(3), activateCDKRadio destroyCDKRadio drawCDKRadio eraseCDKRadio getCDKRadioBox getCDKRadioChoiceCharacter getCDKRadioCurrentItem getCDKRadioHighlight getCDKRadioItems getCDKRadioLeftBrace getCDKRadioRightBrace getCDKRadioSelectedItem injectCDKRadio moveCDKRadio newCDKRadio positionCDKRadio setCDKRadio setCDKRadioBackgroundAttrib setCDKRadioBackgroundColor setCDKRadioBox setCDKRadioBoxAttribute setCDKRadioChoiceCharacter setCDKRadioCurrentItem setCDKRadioHighlight setCDKRadioHorizontalChar setCDKRadioItems setCDKRadioLLChar setCDKRadioLRChar setCDKRadioLeftBrace setCDKRadioPostProcess setCDKRadioPreProcess setCDKRadioRightBrace setCDKRadioSelectedItem setCDKRadioULChar setCDKRadioURChar setCDKRadioVerticalChar cdk_radio(3)
curses radio list widget
activateCDKScale(3), activateCDKScale destroyCDKScale drawCDKScale eraseCDKScale getCDKScaleBox getCDKScaleHighValue getCDKScaleLowValue getCDKScaleValue injectCDKScale moveCDKScale newCDKScale positionCDKScale setCDKScale setCDKScaleBackgroundAttrib setCDKScaleBackgroundColor setCDKScaleBox setCDKScaleBoxAttribute setCDKScaleHorizontalChar setCDKScaleLLChar setCDKScaleLRChar setCDKScaleLowHigh setCDKScalePostProcess setCDKScalePreProcess setCDKScaleULChar setCDKScaleURChar setCDKScaleValue setCDKScaleVerticalChar cdk_scale(3)
curses scale widget (type int)
activateCDKScroll(3), activateCDKScroll addCDKScrollItem deleteCDKScrollItem destroyCDKScroll drawCDKScroll eraseCDKScroll getCDKScrollBox getCDKScrollCurrent getCDKScrollCurrentItem getCDKScrollCurrentTop getCDKScrollHighlight getCDKScrollItems injectCDKScroll insertCDKScrollItem moveCDKScroll newCDKScroll positionCDKScroll setCDKScroll setCDKScrollBackgroundAttrib setCDKScrollBackgroundColor setCDKScrollBox setCDKScrollBoxAttribute setCDKScrollCurrent setCDKScrollCurrentItem setCDKScrollCurrentTop setCDKScrollHighlight setCDKScrollHorizontalChar setCDKScrollItems setCDKScrollLLChar setCDKScrollLRChar setCDKScrollPosition setCDKScrollPostProcess setCDKScrollPreProcess setCDKScrollULChar setCDKScrollURChar setCDKScrollVerticalChar cdk_scroll(3)
curses scrolling list widget
activateCDKSelection(3), activateCDKSelection destroyCDKSelection drawCDKSelection eraseCDKSelection getCDKSelectionBox getCDKSelectionChoice getCDKSelectionChoices getCDKSelectionCurrent getCDKSelectionHighlight getCDKSelectionItems getCDKSelectionMode getCDKSelectionModes getCDKSelectionTitle injectCDKSelection moveCDKSelection newCDKSelection positionCDKSelection setCDKSelection setCDKSelectionBackgroundAttrib setCDKSelectionBackgroundColor setCDKSelectionBox setCDKSelectionBoxAttribute setCDKSelectionChoice setCDKSelectionChoices setCDKSelectionCurrent setCDKSelectionHighlight setCDKSelectionHorizontalChar setCDKSelectionItems setCDKSelectionLLChar setCDKSelectionLRChar setCDKSelectionMode setCDKSelectionModes setCDKSelectionPostProcess setCDKSelectionPreProcess setCDKSelectionTitle setCDKSelectionULChar setCDKSelectionURChar setCDKSelectionVerticalChar cdk_selection(3)
curses selection list widget
activateCDKSlider(3), activateCDKSlider destroyCDKSlider drawCDKSlider eraseCDKSlider getCDKSliderBox getCDKSliderHighValue getCDKSliderLowValue getCDKSliderValue injectCDKSlider moveCDKSlider newCDKSlider positionCDKSlider setCDKSlider setCDKSliderBackgroundAttrib setCDKSliderBackgroundColor setCDKSliderBox setCDKSliderBoxAttribute setCDKSliderHorizontalChar setCDKSliderLLChar setCDKSliderLRChar setCDKSliderLowHigh setCDKSliderPostProcess setCDKSliderPreProcess setCDKSliderULChar setCDKSliderURChar setCDKSliderValue setCDKSliderVerticalChar cdk_slider(3)
curses slider widget (type int)
activateCDKSwindow(3), activateCDKSwindow addCDKSwindow cleanCDKSwindow destroyCDKSwindow drawCDKSwindow dumpCDKSwindow eraseCDKSwindow execCDKSwindow getCDKSwindowBox getCDKSwindowContents injectCDKSwindow jumpToLineCDKSwindow loadCDKSwindowInformation moveCDKSwindow newCDKSwindow positionCDKSwindow saveCDKSwindowInformation setCDKSwindow setCDKSwindowBackgroundAttrib setCDKSwindowBackgroundColor setCDKSwindowBox setCDKSwindowBoxAttribute setCDKSwindowContents setCDKSwindowHorizontalChar setCDKSwindowLLChar setCDKSwindowLRChar setCDKSwindowPostProcess setCDKSwindowPreProcess setCDKSwindowULChar setCDKSwindowURChar setCDKSwindowVerticalChar trimCDKSwindow cdk_swindow(3)
a curses scrolling window widget
activateCDKTemplate(3), activateCDKTemplate cleanCDKTemplate destroyCDKTemplate drawCDKTemplate eraseCDKTemplate getCDKTemplateBox getCDKTemplateMin getCDKTemplateValue injectCDKTemplate mixCDKTemplate newCDKTemplate setCDKTemplate setCDKTemplateBackgroundAttrib setCDKTemplateBackgroundColor setCDKTemplateBox setCDKTemplateBoxAttribute setCDKTemplateCB setCDKTemplateHorizontalChar setCDKTemplateLLChar setCDKTemplateLRChar setCDKTemplateMin setCDKTemplatePostProcess setCDKTemplatePreProcess setCDKTemplateULChar setCDKTemplateURChar setCDKTemplateValue setCDKTemplateVerticalChar unmixCDKTemplate cdk_template(3)
a curses template widget
activateCDKUScale(3), activateCDKUScale destroyCDKUScale drawCDKUScale eraseCDKUScale getCDKUScaleBox getCDKUScaleHighValue getCDKUScaleLowValue getCDKUScaleValue injectCDKUScale moveCDKUScale newCDKUScale positionCDKUScale setCDKUScale setCDKUScaleBackgroundAttrib setCDKUScaleBackgroundColor setCDKUScaleBox setCDKUScaleBoxAttribute setCDKUScaleHorizontalChar setCDKUScaleLLChar setCDKUScaleLRChar setCDKUScaleLowHigh setCDKUScalePostProcess setCDKUScalePreProcess setCDKUScaleULChar setCDKUScaleURChar setCDKUScaleValue setCDKUScaleVerticalChar cdk_uscale(3)
curses scale widget (type unsigned)
activateCDKUSlider(3), activateCDKUSlider destroyCDKUSlider drawCDKUSlider eraseCDKUSlider getCDKUSliderBox getCDKUSliderHighValue getCDKUSliderLowValue getCDKUSliderValue injectCDKUSlider moveCDKUSlider newCDKUSlider positionCDKUSlider setCDKUSlider setCDKUSliderBackgroundAttrib setCDKUSliderBackgroundColor setCDKUSliderBox setCDKUSliderBoxAttribute setCDKUSliderHorizontalChar setCDKUSliderLLChar setCDKUSliderLRChar setCDKUSliderLowHigh setCDKUSliderPostProcess setCDKUSliderPreProcess setCDKUSliderULChar setCDKUSliderURChar setCDKUSliderValue setCDKUSliderVerticalChar cdk_uslider(3)
curses slider widget (type unsigned)
activateCDKViewer(3), activateCDKViewer cleanCDKViewer destroyCDKViewer drawCDKViewer eraseCDKViewer getCDKViewerBox getCDKViewerHighlight getCDKViewerInfo getCDKViewerInfoLine getCDKViewerTitle moveCDKViewer newCDKViewer positionCDKViewer setCDKViewer setCDKViewerBackgroundAttrib setCDKViewerBackgroundColor setCDKViewerBox setCDKViewerBoxAttribute setCDKViewerHighlight setCDKViewerHorizontalChar setCDKViewerInfo setCDKViewerInfoLine setCDKViewerLLChar setCDKViewerLRChar setCDKViewerTitle setCDKViewerULChar setCDKViewerURChar setCDKViewerVerticalChar cdk_viewer(3)
curses viewer list widget
Global pointer to the most recent activated dialog. Allegro game programming library
Global pointer to the most recent activated menu. Allegro game programming library
This agent activates/deactivates logical volumes
activate a capture handle
check whether monitor mode can be set for a not-yet-activated capture handle
set the buffer size for a not-yet-activated capture handle
set immediate mode for a not-yet-activated capture handle
set promiscuous mode for a not-yet-activated capture handle
set capture protocol for a not-yet-activated capture handle
set monitor mode for a not-yet-activated capture handle
set the snapshot length for a not-yet-activated capture handle
set the packet buffer timeout for a not-yet-activated capture handle
pkg_repos(3), pkg_repos_total_count(3), pkg_repos_activated_count(3), pkg_repo_url(3), pkg_repo_ident(3), pkg_repo_name(3), pkg_repo_ident_from_name(3), pkg_repo_key(3), pkg_repo_fingerprints(3), pkg_repo_signature_type(3), pkg_repo_mirror_type(3), pkg_repo_enabled(3), pkg_repo_priority(3), pkg_repo_find_ident(3), pkg_repo_find_name(3)
manipulate repositories
invoke ZONE ACTIVATE SMP function
Flag to deactivate the emergency exit key combination. Allegro game programming library
tpm2_activatecredential(1), tpm2_activatecredential(1)(1)
Enables access to the credential qualifier to recover the credential secret
Activates a voice. Allegro game programming library
deactivate a drop site
Arguments for method ActivateType on Paws::CloudFormation
Arguments for method DeactivateType on Paws::CloudFormation
Arguments for method ActivateEventSource on Paws::CloudWatchEvents
Arguments for method DeactivateEventSource on Paws::CloudWatchEvents
Arguments for method ActivatePipeline on Paws::DataPipeline
Arguments for method DeactivatePipeline on Paws::DataPipeline
Arguments for method DeactivateMFADevice on Paws::IAM
Arguments for method ActivateAnomalyDetector on Paws::LookoutMetrics
Arguments for method ActivateKeySigningKey on Paws::Route53
Arguments for method DeactivateKeySigningKey on Paws::Route53
Arguments for method ActivateContactChannel on Paws::SSMContacts
Arguments for method DeactivateContactChannel on Paws::SSMContacts
Arguments for method ActivateGateway on Paws::StorageGateway
Arguments for method ListActivatedRulesInRuleGroup on Paws::WAF
Arguments for method ListActivatedRulesInRuleGroup on Paws::WAFRegional
Arguments for method ActivateUser on Paws::WorkDocs
Arguments for method DeactivateUser on Paws::WorkDocs
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account show_account Display account details --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications options: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA. When used in combination with the (ga-v(ga option, the challenge URLs or FQDNs and their expected return values are shown. (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --issuance-timeout ISSUANCE_TIMEOUT This option specifies how long (in seconds) Certbot will wait for the server to issue a certificate. (default: 90) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.26.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --new-key When renewing or replacing a certificate, generate a new private key, even if --reuse-key is set on the existing certificate. Combining --new-key and --reuse- key will result in the private key being replaced and then reused in future renewals. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must-Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex:, (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. show_account: Options useful for the "show_account" subcommand: plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d -d -w /var/www/thing -d -d (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{",":"/www/eg1/", "":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"":"/var/www"}. (default: {}) P
Starts the activation system daemon that enables objects to be registered and activated in a Java Virtual Machine (JVM)
Activate syntax extensions
Functions for wxActivateEvent class
home | help