Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MODULE_VERSION(9)
set kernel module version
VOP_BMAP(9)
Logical to physical block number conversion
curses_version(3), use_extended_names(3)
miscellaneous curses extensions
device_printf(9)
formatted output conversion
devstat(3), devstat_getnumdevs(3), devstat_getgeneration(3), devstat_getversion(3), devstat_checkversion(3), devstat_getdevs(3), devstat_selectdevs(3), devstat_buildmatch(3), devstat_compute_statistics(3), devstat_compute_etime(3)
device statistics utility library
divert(4)
kernel packet diversion mechanism
elf_version(3)
retrieve or set ELF library operating version
elftc_version(3)
return a project-wide version identifier string
ethers(3), ether_line(3), ether_aton(3), ether_aton_r(3), ether_ntoa(3), ether_ntoa_r(3), ether_ntohost(3), ether_hostton(3)
Ethernet address conversion and lookup routines
eui64(3), eui64_aton(3), eui64_ntoa(3), eui64_ntohost(3), eui64_hostton(3)
IEEE EUI-64 conversion and lookup routines
freebsd-version(1)
print the version and patch level of the installed system
getosreldate(3)
get the value of __FreeBSD_version
iconv(1)
codeset conversion utility
iconv_open(3), iconv_open_into(3), iconv_close(3), iconv(3)
codeset conversion functions
inet6(4)
Internet protocol version 6 family
ip6(4)
Internet Protocol version 6 (IPv6) network layer
krb5_425_conv_principal(3), krb5_425_conv_principal_ext(3), krb5_524_conv_principal(3)
converts to and from version 4 principals
krb5_add_et_list(3), krb5_add_extra_addresses(3), krb5_add_ignore_addresses(3), krb5_context(3), krb5_free_config_files(3), krb5_free_context(3), krb5_get_default_config_files(3), krb5_get_dns_canonize_hostname(3), krb5_get_extra_addresses(3), krb5_get_fcache_version(3), krb5_get_ignore_addresses(3), krb5_get_kdc_sec_offset(3), krb5_get_max_time_skew(3), krb5_get_use_admin_kdc krb5_init_context(3), krb5_init_ets(3), krb5_prepend_config_files(3), krb5_prepend_config_files_default(3), krb5_set_config_files(3), krb5_set_dns_canonize_hostname(3), krb5_set_extra_addresses(3), krb5_set_fcache_version(3), krb5_set_ignore_addresses(3), krb5_set_max_time_skew(3), krb5_set_use_admin_kdc(3)
create, modify and delete krb5_context structures
krb5_parse_name(3)
string to principal conversion
kyua-about(1), kyua about(1)
Shows detailed authors, license, and version information
libmagic(3), magic_open(3), magic_close(3), magic_error(3), magic_errno(3), magic_descriptor(3), magic_buffer(3), magic_getflags(3), magic_setflags(3), magic_check(3), magic_compile(3), magic_list(3), magic_load(3), magic_load_buffers(3), magic_setparam(3), magic_getparam(3), magic_version(3)
Magic number recognition library
makedev(3), major(3), minor(3)
device number conversion
mbsinit(3)
determine conversion object status
mkcsmapper(1)
generates hashed conversion data for iconv(3)
mkesdb(1)
generates conversion catalog for iconv(3)
nfsuserd(8)
load user and group information into the kernel for NFSv4 services plus support manage-gids for all NFS versions
nfsv4(4), NFSv4(4)
NFS Version 4 Protocol
pcap_lib_version(3)
get the version information for libpcap
pcap_major_version(3), pcap_minor_version(3)
get the version number of a savefile
pnfs(4), pNFS(4)
NFS Version 4.1 and 4.2 Parallel NFS Protocol
pnfsserver(4), pNFSserver(4)
NFS Version 4.1 and 4.2 Parallel NFS Protocol Server
printf(3), fprintf(3), sprintf(3), snprintf(3), asprintf(3), dprintf(3), vprintf(3), vfprintf(3), vsprintf(3), vsnprintf(3), vasprintf(3), vdprintf(3)
formatted output conversion
printf(9), uprintf(9), tprintf(9), log(9)
formatted output conversion
printf_l(3), asprintf_l(3), fprintf_l(3), snprintf_l(3), sprintf_l(3), vasprintf_l(3), vfprintf_l(3), vprintf_l(3), vsnprintf_l(3), vsprintf_l(3)
formatted output conversion
querylocale(3)
Look up the locale name or version for a specified category
rpc_gss_get_versions(3)
Get supported protocol version
scanf(3), fscanf(3), sscanf(3), vscanf(3), vsscanf(3), vfscanf(3)
input format conversion
scanf_l(3), fscanf_l(3), sscanf_l(3), vfscanf_l(3), vscanf_l(3), vsscanf_l(3)
input format conversion
ssh-keygen(1)
authentication key generation, management and conversion
tolower(3)
upper case to lower case letter conversion
toupper(3)
lower case to upper case letter conversion
towlower(3)
upper case to lower case letter conversion (wide character version)
towupper(3)
lower case to upper case letter conversion (wide character version)
tzset(3), tzsetwall(3)
initialize time conversion information
units(1)
conversion calculator
version.4th(8)
FreeBSD version string boot module
what(1)
show what versions of object modules were used to construct a file
wprintf(3), fwprintf(3), swprintf(3), vwprintf(3), vfwprintf(3), vswprintf(3)
formatted wide character output conversion
wscanf(3), fwscanf(3), swscanf(3), vwscanf(3), vswscanf(3), vfwscanf(3)
wide character input format conversion
xo_set_version(3), xo_set_version_h(3)
record content-version information in encoded output
yppoll(8)
ask version of NIS map from NIS server
zfs-upgrade(8)
manage on-disk version of ZFS filesystems
zpool-upgrade(8)
manage version and feature flags of ZFS storage pools
BN_bn2binpad(3), BN_bn2bin(3), BN_bin2bn(3), BN_bn2lebinpad(3), BN_lebin2bn(3), BN_bn2hex(3), BN_bn2dec(3), BN_hex2bn(3), BN_dec2bn(3), BN_print(3), BN_print_fp(3), BN_bn2mpi(3), BN_mpi2bn(3)
format conversions
EC_GROUP_get0_order(3), EC_GROUP_order_bits(3), EC_GROUP_get0_cofactor(3), EC_GROUP_copy(3), EC_GROUP_dup(3), EC_GROUP_method_of(3), EC_GROUP_set_generator(3), EC_GROUP_get0_generator(3), EC_GROUP_get_order(3), EC_GROUP_get_cofactor(3), EC_GROUP_set_curve_name(3), EC_GROUP_get_curve_name(3), EC_GROUP_set_asn1_flag(3), EC_GROUP_get_asn1_flag(3), EC_GROUP_set_point_conversion_form(3), EC_GROUP_get_point_conversion_form(3), EC_GROUP_get0_seed(3), EC_GROUP_get_seed_len(3), EC_GROUP_set_seed(3), EC_GROUP_get_degree(3), EC_GROUP_check(3), EC_GROUP_check_discriminant(3), EC_GROUP_cmp(3), EC_GROUP_get_basis_type(3), EC_GROUP_get_trinomial_basis(3), EC_GROUP_get_pentanomial_basis(3)
Functions for manipulating EC_GROUP objects
OPENSSL_VERSION_NUMBER(3), OPENSSL_VERSION_TEXT(3), OpenSSL_version(3), OpenSSL_version_num(3)
get OpenSSL version number
OPENSSL_VERSION_NUMBER(3), SSLeay(3), SSLeay_version(3)
get OpenSSL version number
RSA_set0_key(3), RSA_set0_factors(3), RSA_set0_crt_params(3), RSA_get0_key(3), RSA_get0_factors(3), RSA_get0_crt_params(3), RSA_get0_n(3), RSA_get0_e(3), RSA_get0_d(3), RSA_get0_p(3), RSA_get0_q(3), RSA_get0_dmp1(3), RSA_get0_dmq1(3), RSA_get0_iqmp(3), RSA_get0_pss_params(3), RSA_clear_flags(3), RSA_test_flags(3), RSA_set_flags(3), RSA_get0_engine(3), RSA_get_multi_prime_extra_count(3), RSA_get0_multi_prime_factors(3), RSA_get0_multi_prime_crt_params(3), RSA_set0_multi_prime_params(3), RSA_get_version(3)
Routines for getting and setting data in an RSA object
SCT_new(3), SCT_new_from_base64(3), SCT_free(3), SCT_LIST_free(3), SCT_get_version(3), SCT_set_version(3), SCT_get_log_entry_type(3), SCT_set_log_entry_type(3), SCT_get0_log_id(3), SCT_set0_log_id(3), SCT_set1_log_id(3), SCT_get_timestamp(3), SCT_set_timestamp(3), SCT_get_signature_nid(3), SCT_set_signature_nid(3), SCT_get0_signature(3), SCT_set0_signature(3), SCT_set1_signature(3), SCT_get0_extensions(3), SCT_set0_extensions(3), SCT_set1_extensions(3), SCT_get_source(3), SCT_set_source(3)
A Certificate Transparency Signed Certificate Timestamp
SSL_CIPHER_get_name(3), SSL_CIPHER_standard_name(3), OPENSSL_cipher_name(3), SSL_CIPHER_get_bits(3), SSL_CIPHER_get_version(3), SSL_CIPHER_description(3), SSL_CIPHER_get_cipher_nid(3), SSL_CIPHER_get_digest_nid(3), SSL_CIPHER_get_handshake_digest(3), SSL_CIPHER_get_kx_nid(3), SSL_CIPHER_get_auth_nid(3), SSL_CIPHER_is_aead(3), SSL_CIPHER_find(3), SSL_CIPHER_get_id(3), SSL_CIPHER_get_protocol_id(3)
get SSL_CIPHER properties
SSL_CTX_set_client_hello_cb(3), SSL_client_hello_cb_fn(3), SSL_client_hello_isv2(3), SSL_client_hello_get0_legacy_version(3), SSL_client_hello_get0_random(3), SSL_client_hello_get0_session_id(3), SSL_client_hello_get0_ciphers(3), SSL_client_hello_get0_compression_methods(3), SSL_client_hello_get1_extensions_present(3), SSL_client_hello_get0_ext(3)
callback functions for early server-side ClientHello processing
SSL_CTX_set_min_proto_version(3), SSL_CTX_set_max_proto_version(3), SSL_CTX_get_min_proto_version(3), SSL_CTX_get_max_proto_version(3), SSL_set_min_proto_version(3), SSL_set_max_proto_version(3), SSL_get_min_proto_version(3), SSL_get_max_proto_version(3)
Get and set minimum and maximum supported protocol version
SSL_CTX_set_ssl_version(3), SSL_set_ssl_method(3), SSL_get_ssl_method(3)
choose a new TLS/SSL method
SSL_SESSION_get_protocol_version(3), SSL_SESSION_set_protocol_version(3)
get and set the session protocol version
SSL_client_version(3), SSL_get_version(3), SSL_is_dtls(3), SSL_version(3)
get the protocol information of a connection
SSL_get_current_cipher(3), SSL_get_cipher_name(3), SSL_get_cipher(3), SSL_get_cipher_bits(3), SSL_get_cipher_version(3), SSL_get_pending_cipher(3)
get SSL_CIPHER of a connection
X509_get_version(3), X509_set_version(3), X509_REQ_get_version(3), X509_REQ_set_version(3), X509_CRL_get_version(3), X509_CRL_set_version(3)
get or set certificate, certificate request or CRL version
openssl-pkcs8(1), pkcs8(1)
PKCS#8 format private key conversion tool
openssl-version(1), version(1)
print OpenSSL version information
AG_Units(3)
agar unit conversion facility
AG_Version(3)
agar data file versioning
ALLEGRO_SUB_VERSION(3)
Defined to the middle version of Allegro
ALLEGRO_VERSION(3)
Defined to the major version of Allegro
ALLEGRO_VERSION_STR(3)
Defined to a string with the full Allegro version number
ALLEGRO_WIP_VERSION(3)
Defined to the minor version of Allegro
ALTER_CONVERSION(7)
change the definition of a conversion
AllPlanes(3), BlackPixel(3), WhitePixel(3), ConnectionNumber(3), DefaultColormap(3), DefaultDepth(3), XListDepths(3), DefaultGC(3), DefaultRootWindow(3), DefaultScreenOfDisplay(3), DefaultScreen(3), DefaultVisual(3), DisplayCells(3), DisplayPlanes(3), DisplayString(3), XMaxRequestSize(3), XExtendedMaxRequestSize(3), LastKnownRequestProcessed(3), NextRequest(3), ProtocolVersion(3), ProtocolRevision(3), QLength(3), RootWindow(3), ScreenCount(3), ScreenOfDisplay(3), ServerVendor(3), VendorRelease(3)
Display macros and functions
BN_bn2binpad(3), BN_bn2bin(3), BN_bin2bn(3), BN_bn2lebinpad(3), BN_lebin2bn(3), BN_bn2hex(3), BN_bn2dec(3), BN_hex2bn(3), BN_dec2bn(3), BN_print(3), BN_print_fp(3), BN_bn2mpi(3), BN_mpi2bn(3)
format conversions
BN_bn2binpad(3ossl), BN_bn2bin(3ossl), BN_bin2bn(3ossl), BN_bn2lebinpad(3ossl), BN_lebin2bn(3ossl), BN_bn2nativepad(3ossl), BN_native2bn(3ossl), BN_bn2hex(3ossl), BN_bn2dec(3ossl), BN_hex2bn(3ossl), BN_dec2bn(3ossl), BN_print(3ossl), BN_print_fp(3ossl), BN_bn2mpi(3ossl), BN_mpi2bn(3ossl)
format conversions
CREATE_CONVERSION(7)
define a new encoding conversion
CURLINFO_HTTP_VERSION(3)
get the http version used in the connection
CURLOPT_CRLF(3)
enable/disable CRLF conversion
CURLOPT_HTTP_VERSION(3)
specify HTTP protocol version to use
CURLOPT_IPRESOLVE(3)
specify which IP protocol version to use
CURLOPT_PROXY_SSLVERSION(3)
set preferred proxy TLS/SSL version
CURLOPT_SSLVERSION(3)
set preferred TLS/SSL version
DMXQueryVersion(3)
determine DMX extension version
DPMSGetVersion(3)
returns the version of the DPMS extension implemented by the X server
DROP_CONVERSION(7)
remove a conversion
DS18S20(3)
High-Precision 1-Wire Digital Thermometer DS1920 - iButton version of the thermometer
DisplayOfCCC(3), VisualOfCCC(3), ScreenNumberOfCCC(3), ScreenWhitePointOfCCC(3), ClientWhitePointOfCCC(3)
Color Conversion Context macros
Dpkg::Version(3perl)
handling and comparing dpkg-style version numbers
EC_GROUP_get0_order(3), EC_GROUP_order_bits(3), EC_GROUP_get0_cofactor(3), EC_GROUP_copy(3), EC_GROUP_dup(3), EC_GROUP_method_of(3), EC_GROUP_set_generator(3), EC_GROUP_get0_generator(3), EC_GROUP_get_order(3), EC_GROUP_get_cofactor(3), EC_GROUP_set_curve_name(3), EC_GROUP_get_curve_name(3), EC_GROUP_set_asn1_flag(3), EC_GROUP_get_asn1_flag(3), EC_GROUP_set_point_conversion_form(3), EC_GROUP_get_point_conversion_form(3), EC_GROUP_get0_seed(3), EC_GROUP_get_seed_len(3), EC_GROUP_set_seed(3), EC_GROUP_get_degree(3), EC_GROUP_check(3), EC_GROUP_check_discriminant(3), EC_GROUP_cmp(3), EC_GROUP_get_basis_type(3), EC_GROUP_get_trinomial_basis(3), EC_GROUP_get_pentanomial_basis(3)
Functions for manipulating EC_GROUP objects
EC_GROUP_get0_order(3ossl), EC_GROUP_order_bits(3ossl), EC_GROUP_get0_cofactor(3ossl), EC_GROUP_copy(3ossl), EC_GROUP_dup(3ossl), EC_GROUP_method_of(3ossl), EC_GROUP_set_generator(3ossl), EC_GROUP_get0_generator(3ossl), EC_GROUP_get_order(3ossl), EC_GROUP_get_cofactor(3ossl), EC_GROUP_set_curve_name(3ossl), EC_GROUP_get_curve_name(3ossl), EC_GROUP_set_asn1_flag(3ossl), EC_GROUP_get_asn1_flag(3ossl), EC_GROUP_set_point_conversion_form(3ossl), EC_GROUP_get_point_conversion_form(3ossl), EC_GROUP_get0_seed(3ossl), EC_GROUP_get_seed_len(3ossl), EC_GROUP_set_seed(3ossl), EC_GROUP_get_degree(3ossl), EC_GROUP_check(3ossl), EC_GROUP_check_named_curve(3ossl), EC_GROUP_check_discriminant(3ossl), EC_GROUP_cmp(3ossl), EC_GROUP_get_basis_type(3ossl), EC_GROUP_get_trinomial_basis(3ossl), EC_GROUP_get_pentanomial_basis(3ossl), EC_GROUP_get0_field(3ossl), EC_GROUP_get_field_type(3ossl)
Functions for manipulating EC_GROUP objects
EVP_PKEY_get_field_type(3ossl), EVP_PKEY_get_ec_point_conv_form(3ossl)
get field type or point conversion form of a key
GraphicsMagick++-config(1)
get information about the installed version of Magick++
GraphicsMagick-config(1)
get information about the installed version of GraphicsMagick
GraphicsMagickWand-config(1)
get information about the installed version of GraphicsMagick
JSBSim(1)
standalone version of the JSBSim open source flight dynamics model
MAKE_VERSION(3)
Create a 32 bit integer from the Allegro version
MPE_Log_sync_clocks(4)
synchronize or recalibrate all MPI clocks to minimize the effect of time drift. It is like a longer version of MPI_Comm_barrier( MPI_COMM_WORLD );
MPIX_Ineighbor_allgather(3)
Nonblocking version of MPIX_Neighbor_allgather
MPIX_Ineighbor_allgatherv(3)
Nonblocking version of MPIX_Neighbor_allgatherv
MPIX_Ineighbor_alltoall(3)
Nonblocking version of MPIX_Neighbor_alltoall
MPIX_Ineighbor_alltoallv(3)
Nonblocking version of MPIX_Neighbor_alltoallv
MPIX_Ineighbor_alltoallw(3)
Nonblocking version of MPIX_Neighbor_alltoallw
MPI_Get_library_version(3)
Return the version number of MPI library
MPI_Get_version(3)
Return the version number of MPI
MPI_Ineighbor_allgather(3)
Nonblocking version of MPI_Neighbor_allgather
MPI_Ineighbor_allgatherv(3)
Nonblocking version of MPI_Neighbor_allgatherv
MPI_Ineighbor_alltoall(3)
Nonblocking version of MPI_Neighbor_alltoall
MPI_Ineighbor_alltoallv(3)
Nonblocking version of MPI_Neighbor_alltoallv
MPI_Ineighbor_alltoallw(3)
Nonblocking version of MPI_Neighbor_alltoallw
Magick++-config(1)
get information about the installed version of Magick++
Magick-config(1)
get information about the installed version of ImageMagick
MagickCore-config(1)
get information about the installed version of ImageMagick
MagickWand-config(1)
get information about the installed version of the Magick Wand
Mat_GetLibraryVersion(3)
Gets the version of the matio library
Mat_GetVersion(3)
Returns the version of a MATLAB MAT file given a MAT file structure
Munin::Node::Configure::History(3)
Filtering plugins based on the version of Munin they were first distributed with
OPENSSL_VERSION_MAJOR(3ossl), OPENSSL_VERSION_MINOR(3ossl), OPENSSL_VERSION_PATCH(3ossl), OPENSSL_VERSION_PRE_RELEASE(3ossl), OPENSSL_VERSION_BUILD_METADATA(3ossl), OPENSSL_VERSION_TEXT(3ossl), OPENSSL_VERSION_PREREQ(3ossl), OPENSSL_version_major(3ossl), OPENSSL_version_minor(3ossl), OPENSSL_version_patch(3ossl), OPENSSL_version_pre_release(3ossl), OPENSSL_version_build_metadata(3ossl), OpenSSL_version(3ossl), OPENSSL_VERSION_NUMBER(3ossl), OpenSSL_version_num(3ossl), OPENSSL_info(3ossl)
get OpenSSL version number and other information
OPENSSL_VERSION_NUMBER(3), OPENSSL_VERSION_TEXT(3), OpenSSL_version(3), OpenSSL_version_num(3)
get OpenSSL version number
PS_get_majorversion(3)
returns the major version number of the PostScript library
PS_get_minorversion(3)
returns the minor version number of the PostScript library
PS_get_subminorversion(3)
returns the subminor version number of the PostScript library
PVM(1), pvm_intro(1)
Parallel Virtual Machine System Version 3
QuryShape(3), Shape_GetBbox(3), Shape_GetShapeRectanglesObj(3), Shape_QueryVersion(3), Shape_ExtensionPresent(3)
get info about a shaping or the shaping subsystem
RGB_MAP(3)
Stores an rgb map to accelerate conversions. Allegro game programming library
RSA_set0_key(3), RSA_set0_factors(3), RSA_set0_crt_params(3), RSA_get0_key(3), RSA_get0_factors(3), RSA_get0_crt_params(3), RSA_get0_n(3), RSA_get0_e(3), RSA_get0_d(3), RSA_get0_p(3), RSA_get0_q(3), RSA_get0_dmp1(3), RSA_get0_dmq1(3), RSA_get0_iqmp(3), RSA_get0_pss_params(3), RSA_clear_flags(3), RSA_test_flags(3), RSA_set_flags(3), RSA_get0_engine(3), RSA_get_multi_prime_extra_count(3), RSA_get0_multi_prime_factors(3), RSA_get0_multi_prime_crt_params(3), RSA_set0_multi_prime_params(3), RSA_get_version(3)
Routines for getting and setting data in an RSA object
RSA_set0_key(3ossl), RSA_set0_factors(3ossl), RSA_set0_crt_params(3ossl), RSA_get0_key(3ossl), RSA_get0_factors(3ossl), RSA_get0_crt_params(3ossl), RSA_get0_n(3ossl), RSA_get0_e(3ossl), RSA_get0_d(3ossl), RSA_get0_p(3ossl), RSA_get0_q(3ossl), RSA_get0_dmp1(3ossl), RSA_get0_dmq1(3ossl), RSA_get0_iqmp(3ossl), RSA_get0_pss_params(3ossl), RSA_clear_flags(3ossl), RSA_test_flags(3ossl), RSA_set_flags(3ossl), RSA_get0_engine(3ossl), RSA_get_multi_prime_extra_count(3ossl), RSA_get0_multi_prime_factors(3ossl), RSA_get0_multi_prime_crt_params(3ossl), RSA_set0_multi_prime_params(3ossl), RSA_get_version(3ossl)
Routines for getting and setting data in an RSA object
RkCloseRoma(3), RkCloseRoma / RkwCloseRoma(3)
close the dictionary used for Romaji-kana conversion
RkEndBun(3)
terminate kana-kanji conversion
RkFinalize(3)
terminate the kana-kanji conversion functions
RkInitialize(3)
initialize the kana-kanji conversion functions
RkMapPhonogram(3)
perform Romaji-kana conversion by using a specified Romaji-kana conversion table
RkMapRoma(3)
perform Romaji-kana conversion by using a specified Romaji-kana conversion table
RkOpenRoma(3)
open the dictionary to use for Romaji-kana conversion
SCT_new(3), SCT_new_from_base64(3), SCT_free(3), SCT_LIST_free(3), SCT_get_version(3), SCT_set_version(3), SCT_get_log_entry_type(3), SCT_set_log_entry_type(3), SCT_get0_log_id(3), SCT_set0_log_id(3), SCT_set1_log_id(3), SCT_get_timestamp(3), SCT_set_timestamp(3), SCT_get_signature_nid(3), SCT_set_signature_nid(3), SCT_get0_signature(3), SCT_set0_signature(3), SCT_set1_signature(3), SCT_get0_extensions(3), SCT_set0_extensions(3), SCT_set1_extensions(3), SCT_get_source(3), SCT_set_source(3)
A Certificate Transparency Signed Certificate Timestamp
SCT_new(3ossl), SCT_new_from_base64(3ossl), SCT_free(3ossl), SCT_LIST_free(3ossl), SCT_get_version(3ossl), SCT_set_version(3ossl), SCT_get_log_entry_type(3ossl), SCT_set_log_entry_type(3ossl), SCT_get0_log_id(3ossl), SCT_set0_log_id(3ossl), SCT_set1_log_id(3ossl), SCT_get_timestamp(3ossl), SCT_set_timestamp(3ossl), SCT_get_signature_nid(3ossl), SCT_set_signature_nid(3ossl), SCT_get0_signature(3ossl), SCT_set0_signature(3ossl), SCT_set1_signature(3ossl), SCT_get0_extensions(3ossl), SCT_set0_extensions(3ossl), SCT_set1_extensions(3ossl), SCT_get_source(3ossl), SCT_set_source(3ossl)
A Certificate Transparency Signed Certificate Timestamp
SDL_AudioCVT(3)
Audio Conversion Structure
SDL_BuildAudioCVT(3)
Initializes a SDL_AudioCVT structure for conversion
SDLmm_SRect(3), SDLmm::SRect(3)
This enhanced version of SDL_Rect includes a number of handy short-hand constructors. Since the class is derived from the SDL_Rect struct, it can be used in any context where an SDL_Rect is valid
SSL_CIPHER_get_name(3), SSL_CIPHER_standard_name(3), OPENSSL_cipher_name(3), SSL_CIPHER_get_bits(3), SSL_CIPHER_get_version(3), SSL_CIPHER_description(3), SSL_CIPHER_get_cipher_nid(3), SSL_CIPHER_get_digest_nid(3), SSL_CIPHER_get_handshake_digest(3), SSL_CIPHER_get_kx_nid(3), SSL_CIPHER_get_auth_nid(3), SSL_CIPHER_is_aead(3), SSL_CIPHER_find(3), SSL_CIPHER_get_id(3), SSL_CIPHER_get_protocol_id(3)
get SSL_CIPHER properties
SSL_CIPHER_get_name(3ossl), SSL_CIPHER_standard_name(3ossl), OPENSSL_cipher_name(3ossl), SSL_CIPHER_get_bits(3ossl), SSL_CIPHER_get_version(3ossl), SSL_CIPHER_description(3ossl), SSL_CIPHER_get_cipher_nid(3ossl), SSL_CIPHER_get_digest_nid(3ossl), SSL_CIPHER_get_handshake_digest(3ossl), SSL_CIPHER_get_kx_nid(3ossl), SSL_CIPHER_get_auth_nid(3ossl), SSL_CIPHER_get_prf_nid(3ossl), SSL_CIPHER_is_aead(3ossl), SSL_CIPHER_find(3ossl), SSL_CIPHER_get_id(3ossl), SSL_CIPHER_get_protocol_id(3ossl)
get SSL_CIPHER properties
SSL_CTX_set_client_hello_cb(3), SSL_client_hello_cb_fn(3), SSL_client_hello_isv2(3), SSL_client_hello_get0_legacy_version(3), SSL_client_hello_get0_random(3), SSL_client_hello_get0_session_id(3), SSL_client_hello_get0_ciphers(3), SSL_client_hello_get0_compression_methods(3), SSL_client_hello_get1_extensions_present(3), SSL_client_hello_get0_ext(3)
callback functions for early server-side ClientHello processing
SSL_CTX_set_client_hello_cb(3ossl), SSL_client_hello_cb_fn(3ossl), SSL_client_hello_isv2(3ossl), SSL_client_hello_get0_legacy_version(3ossl), SSL_client_hello_get0_random(3ossl), SSL_client_hello_get0_session_id(3ossl), SSL_client_hello_get0_ciphers(3ossl), SSL_client_hello_get0_compression_methods(3ossl), SSL_client_hello_get1_extensions_present(3ossl), SSL_client_hello_get0_ext(3ossl)
callback functions for early server-side ClientHello processing
SSL_CTX_set_min_proto_version(3), SSL_CTX_set_max_proto_version(3), SSL_CTX_get_min_proto_version(3), SSL_CTX_get_max_proto_version(3), SSL_set_min_proto_version(3), SSL_set_max_proto_version(3), SSL_get_min_proto_version(3), SSL_get_max_proto_version(3)
Get and set minimum and maximum supported protocol version
SSL_CTX_set_min_proto_version(3ossl), SSL_CTX_set_max_proto_version(3ossl), SSL_CTX_get_min_proto_version(3ossl), SSL_CTX_get_max_proto_version(3ossl), SSL_set_min_proto_version(3ossl), SSL_set_max_proto_version(3ossl), SSL_get_min_proto_version(3ossl), SSL_get_max_proto_version(3ossl)
Get and set minimum and maximum supported protocol version
SSL_CTX_set_ssl_version(3), SSL_set_ssl_method(3), SSL_get_ssl_method(3)
choose a new TLS/SSL method
SSL_CTX_set_ssl_version(3ossl), SSL_set_ssl_method(3ossl), SSL_get_ssl_method(3ossl)
choose a new TLS/SSL method
SSL_QUIC_METHOD(3ossl), OSSL_ENCRYPTION_LEVEL(3ossl), SSL_CTX_set_quic_method(3ossl), SSL_set_quic_method(3ossl), SSL_set_quic_transport_params(3ossl), SSL_get_peer_quic_transport_params(3ossl), SSL_quic_max_handshake_flight_len(3ossl), SSL_quic_read_level(3ossl), SSL_quic_write_level(3ossl), SSL_provide_quic_data(3ossl), SSL_process_quic_post_handshake(3ossl), SSL_is_quic(3ossl), SSL_get_peer_quic_transport_version(3ossl), SSL_get_quic_transport_version(3ossl), SSL_set_quic_transport_version(3ossl), SSL_set_quic_use_legacy_codepoint(3ossl), SSL_set_quic_early_data_enabled(3ossl)
QUIC support
SSL_SESSION_get_protocol_version(3), SSL_SESSION_set_protocol_version(3)
get and set the session protocol version
SSL_SESSION_get_protocol_version(3ossl), SSL_SESSION_set_protocol_version(3ossl)
get and set the session protocol version
SSL_client_version(3), SSL_get_version(3), SSL_is_dtls(3), SSL_version(3)
get the protocol information of a connection
SSL_client_version(3ossl), SSL_get_version(3ossl), SSL_is_dtls(3ossl), SSL_version(3ossl)
get the protocol information of a connection
SSL_get_current_cipher(3), SSL_get_cipher_name(3), SSL_get_cipher(3), SSL_get_cipher_bits(3), SSL_get_cipher_version(3), SSL_get_pending_cipher(3)
get SSL_CIPHER of a connection
SSL_get_current_cipher(3ossl), SSL_get_cipher_name(3ossl), SSL_get_cipher(3ossl), SSL_get_cipher_bits(3ossl), SSL_get_cipher_version(3ossl), SSL_get_pending_cipher(3ossl)
get SSL_CIPHER of a connection
TIFFCurrentRow(3tiff), TIFFCurrentStrip(3tiff), TIFFCurrentTile(3tiff), TIFFCurrentDirectory(3tiff), TIFFLastDirectory(3tiff), TIFFFileno(3tiff), TIFFFileName(3tiff), TIFFGetMode(3tiff), TIFFIsTiled(3tiff), TIFFIsByteSwapped(3tiff), TIFFIsUpSampled(3tiff), TIFFIsMSB2LSB(3tiff), TIFFGetVersion(3tiff)
query routines
TIFFcolor(3tiff), TIFFYCbCrToRGBInit(3tiff), TIFFYCbCrtoRGB(3tiff), TIFFCIELabToRGBInit(3tiff), TIFFCIELabToXYZ(3tiff), TIFFXYZToRGB(3tiff)
color conversion routines
Tcl_BadChannelOption.tcl85(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl86(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl87(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_GetVersion.tcl85(3), Tcl_GetVersion(3)
get the version of the library at runtime
Tcl_GetVersion.tcl86(3), Tcl_GetVersion(3)
get the version of the library at runtime
Tcl_GetVersion.tcl87(3), Tcl_GetVersion(3)
get the version of the library at runtime
Tcl_PkgPresent.tcl85(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3)
package version control
Tcl_PkgPresent.tcl86(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3)
package version control
Tcl_PkgPresent.tcl87(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3)
package version control
Wand-config(1)
get information about the installed version of the Magick Wand
WildMidi_GetVersion(3)
Get the library version
WildMidi_SetCvtOption(3)
Set a conversion option for a specific midi
X509_get_version(3), X509_set_version(3), X509_REQ_get_version(3), X509_REQ_set_version(3), X509_CRL_get_version(3), X509_CRL_set_version(3)
get or set certificate, certificate request or CRL version
X509_get_version(3ossl), X509_set_version(3ossl), X509_REQ_get_version(3ossl), X509_REQ_set_version(3ossl), X509_CRL_get_version(3ossl), X509_CRL_set_version(3ossl)
get or set certificate, certificate request or CRL version
XF86VidModeQueryExtension(3), XF86VidModeQueryVersion(3), XF86VidModeSetClientVersion(3), XF86VidModeGetModeLine(3), XF86VidModeGetAllModeLines(3), XF86VidModeAddModeLine(3), XF86VidModeDeleteModeLine(3), XF86VidModeModModeLine(3), XF86VidModeValidateModeLine(3), XF86VidModeSwitchMode(3), XF86VidModeSwitchToMode(3), XF86VidModeLockModeSwitch(3), XF86VidModeGetMonitor(3), XF86VidModeGetViewPort(3), XF86VidModeSetViewPort(3), XF86VidModeGetDotClocks(3), XF86VidModeGetGamma(3), XF86VidModeSetGamma(3), XF86VidModeGetGammaRamp(3), XF86VidModeSetGammaRamp(3), XF86VidModeGetGammaRampSize(3), XF86VidModeGetPermissions(3)
Extension library for the XFree86-VidMode X extension
XGetExtensionVersion(3)
query the version of the input extension
XIQueryVersion(3)
announce and query the support XI2 version
XShapeQueryExtension(3), XShapeQueryVersion(3), XShapeCombineRegion(3), XShapeCombineRectangles(3), XShapeCombineMask(3), XShapeCombineShape(3), XShapeOffsetShape(3), XShapeQueryExtents(3), XShapeSelectInput(3), XShapeInputSelected(3), XShapeGetRectangles(3)
X nonrectangular shape functions
XShmQueryExtension(3), XShmQueryVersion(3), XShmPixmapFormat(3), XShmAttach(3), XShmDetach XShmCreateImage(3), XShmPutImage(3), XShmGetImage(3), XShmCreatePixmap(3), XShmGetEventBase(3)
X Shared Memory extension functions
XcupQueryVersion(3)
Returns TOG-CUP protocol version supported by the X server
XdbeQueryExtension(3)
returns the version of DBE supported by the server
XeviQueryExtension(3), XeviQueryVersion(3), XeviGetVisualInfo(3)
X Extended Visual Information functions
Xfixes(3), XFixes(3)
Augmented versions of core protocol requests
XkbLibraryVersion(3)
Determines the compatibility of a library at runtime
XkbOpenDisplay(3)
Checks for a compatible version of the Xkb extension in both the library and the server, and initializes the extension for use
XmbufQueryExtension(3), XmbufGetVersion(3), XmbufCreateBuffers(3), XmbufDestroyBuffers(3), XmbufDisplayBuffers(3), XmbufGetWindowAttributes(3), XmbufChangeWindowAttributes(3), XmbufGetBufferAttributes(3), XmbufChangeBufferAttributes(3), XmbufGetScreenInfo(3), XmbufCreateStereoWindow(3)
X multibuffering functions
XmtLocalize2(3), XmtLocalize2()(3), XmtLocalize()(3), XmtLocalizeWidget()(3)
look up a translated version of a string in the resource database
XtCreateSelectionRequest(3), XtSendSelectionRequest(3), XtCancelSelectionRequest(3)
bundle multiple selection conversion requests into a single request using MULTIPLE target
XtDisplayStringConversionWarning(3)
issue a conversion warning message
XtStringConversionWarning(3)
issue a conversion warning message
XvQueryExtension(3)
return version and release of extension
Xvfb(1)
virtual framebuffer X server for X Version 11
_getpixel(3), _getpixel15(3), _getpixel16(3), _getpixel24(3), _getpixel32(3)
Faster specific version of getpixel(). Allegro game programming library
_putpixel(3), _putpixel15(3), _putpixel16(3), _putpixel24(3), _putpixel32(3)
Faster specific version of putpixel(). Allegro game programming library
_set_color(3)
Inline version of set_color(). Allegro game programming library
ae-sccs-put(1), ae[hy]sccs[hy]put(1)
put sccs version
aesvt(1)
simple version tool
aev(1), aegis version(1)
give version information
afterstep_faq(1x)
This document is an ever growing set of questions, statements, ideas and complaints about AfterStep version 2.0
al_android_get_os_version(3)
Allegro 5 API
al_get_allegro_acodec_version(3)
Allegro 5 API
al_get_allegro_audio_version(3)
Allegro 5 API
al_get_allegro_color_version(3)
Allegro 5 API
al_get_allegro_font_version(3)
Allegro 5 API
al_get_allegro_image_version(3)
Allegro 5 API
al_get_allegro_memfile_version(3)
Allegro 5 API
al_get_allegro_native_dialog_version(3)
Allegro 5 API
al_get_allegro_physfs_version(3)
Allegro 5 API
al_get_allegro_primitives_version(3)
Allegro 5 API
al_get_allegro_ttf_version(3)
Allegro 5 API
al_get_allegro_version(3)
Allegro 5 API
al_get_allegro_video_version(3)
Allegro 5 API
al_get_opengl_version(3)
Allegro 5 API
allegro_id(3)
String containing date and version number of Allegro
amanda-compatibility(7)
Compatibility between Amanda versions
amuled(1)
the all-platform eMule p2p client - daemonized version
apcsmart(8)
Driver for American Power Conversion Smart Protocol UPS equipment
apcsmart-old(8)
Driver for American Power Conversion Smart Protocol UPS equipment
ares_version(3)
Get the version number of the library
argc.tcl86(n), argc(n), argv(n), argv0(n), auto_path(n), env(n), errorCode(n), errorInfo(n), tcl_interactive(n), tcl_library(n), tcl_nonwordchars(n), tcl_patchLevel(n), tcl_pkgPath(n), tcl_platform(n), tcl_precision(n), tcl_rcFileName(n), tcl_traceCompile(n), tcl_traceExec(n), tcl_wordchars(n), tcl_version(n)
Variables used by Tcl
argc.tcl87(n), argc(n), argv(n), argv0(n), auto_path(n), env(n), errorCode(n), errorInfo(n), tcl_interactive(n), tcl_library(n), tcl_nonwordchars(n), tcl_patchLevel(n), tcl_pkgPath(n), tcl_platform(n), tcl_precision(n), tcl_rcFileName(n), tcl_traceCompile(n), tcl_traceExec(n), tcl_wordchars(n), tcl_version(n)
Variables used by Tcl
asn1_check_version(3)
API function
asn1parse(1ossl), ca(1ossl), ciphers(1ossl), cms(1ossl), crl(1ossl), crl2pkcs7(1ossl), dgst(1ossl), dhparam(1ossl), dsa(1ossl), dsaparam(1ossl), ec(1ossl), ecparam(1ossl), enc(1ossl), engine(1ossl), errstr(1ossl), gendsa(1ossl), genpkey(1ossl), genrsa(1ossl), info(1ossl), kdf(1ossl), mac(1ossl), nseq(1ossl), ocsp(1ossl), passwd(1ossl), pkcs12(1ossl), pkcs7(1ossl), pkcs8(1ossl), pkey(1ossl), pkeyparam(1ossl), pkeyutl(1ossl), prime(1ossl), rand(1ossl), rehash(1ossl), req(1ossl), rsa(1ossl), rsautl(1ossl), s_client(1ossl), s_server(1ossl), s_time(1ossl), sess_id(1ossl), smime(1ossl), speed(1ossl), spkac(1ossl), srp(1ossl), storeutl(1ossl), ts(1ossl), verify(1ossl), version(1ossl), x509(1ossl)
OpenSSL application commands
asn2ff(1)
convert ASN.1 biological data to a flat format (old version)
auconvert(1)
perform various conversion operations on sound files
autoopts-config(1)
script to get information about installed version of autoopts
bchunk(1)
CD image format conversion from bin/cue to iso/cdr
bible(1)
Lookup words and verses in the Bible (King James version)
bogoupgrade(1)
upgrades bogofilter database to current version
bozohttpd(8)
hyper text transfer protocol version 1.1 daemon
brz(1)
Breezy next-generation distributed version control
bsdl2jtag(1)
UrJTAG declaration file conversion
builddbm(8)
build a DBM version of Radius users database
burgerspace-server(6)
UDP server for the networked version of BurgerSpace
bximage(1)
Interactive Disk Image Creation, Conversion, Resize and Redolog Commit Tool for Bochs
caca-config(1)
script to get information about the installed version of libcaca
cal3d_converter(1)
convert cal3d files from / to binary and XML (version 0.12.0)
cannakill(1)
Terminate operation of the Kana-Kanji conversion server cannaserver
cannalib(3), CannaLib(3)
intro Kana-to-Kanji Conversion Library Intro
cannaserver(1)
Kana-Kanji conversion server
cannastat(1)
Display information about the Kana-Kanji conversion server
cbmctrl(1)
manual page for cbmctrl version 0.4.99.99, built on Apr 7 2014 at 21:08:22
cbmctrl(1)
manual page for cbmctrl version 0.4.99.99, built on Jul 13 2018 at 21:34:59
cbmrpm41(1)
manual page for cbmrpm41 Version 0.4.99.99, built on Apr 7 2014 at 21:08:27
ccache2shishi(1)
Shishi user ticket conversion tool
cct(1)
Coordinate Conversion and Transformation rst2man-indent-level 0 1 rstReportMargin \$1
certmgr(1)
Mono Certificate Manager (CLI version)
ceylon-version(1), ceylon version(1)
Shows and updates version numbers in module descriptors
chironfs(8), ChironFS(8)
The Chiron Replication Filesystem version 1.1
chyves(8)
bhyve(8) front end manager -- version 0.2.0
clig_Version(n), ::clig::Version(n)
declare version
coap_logging(3), coap_log(3), coap_get_log_level(3), coap_set_log_level(3), coap_set_log_handler(3), coap_package_name(3), coap_package_version(3), coap_set_show_pdu_output(3), coap_show_pdu(3)
Work with CoAP logging
coap_tls_library(3), coap_dtls_is_supported(3), coap_tls_is_supported(3), coap_tcp_is_supported(3), coap_get_tls_library_version(3), coap_string_tls_support(3), coap_string_tls_version(3), coap_show_tls_version(3)
Work with CoAP TLS libraries
commit-patch(1)
commit patches to Darcs, Git, Mercurial, Bazaar, Monotone, Subversion, or CVS repositories
compare(1)
two versions
cooledit(1), cooledit-3.17.20(1)
Full featured text editor for the X Window System, Version 11
cp-build(1)
copy a file to a destination with version numbering and auditing
curl_maprintf(3), curl_mfprintf(3), curl_mprintf(3), curl_msnprintf(3), curl_msprintf curl_mvaprintf(3), curl_mvfprintf(3), curl_mvprintf(3), curl_mvsnprintf(3), curl_mvsprintf(3)
formatted output conversion
curl_version(3)
returns the libcurl version string
curl_version_info(3)
returns run-time libcurl version info
curses_version(3x), use_extended_names(3x)
miscellaneous curses extensions
cvegenversdat(1)
Generate version matching rules for passed on files
cverules(1)
Generate version matching rules for installed software on a Linux / Unix distribution
cvs(1)
Concurrent Versions System
cvs(1)
OpenCVS Concurrent Versioning System
cvs(5)
Concurrent Versions System support files
cvsintro(7)
introduction to Concurrent Versioning System
cvsrevertlast(1)
Revert files in CVS by one version
cxpm(1)
Check an XPM (X PixMap) file, versions XPM 1, 2, or 3
dcfldd(1)
enhanced version of dd for forensics and security
deb-version(7)
Debian package version number format
digest_file_auth(8)
File based digest authentication helper for Squid. Version 1.1
dirvish-locate(8)
locate file versions in dirvish images
dpkg-divert(1)
override a package's version of a file
dvb-format-convert(1)
DVBv5 tool for file format conversions
dvirle(1)
convert dvi version 2 files, produced by TeX82, to RLE images
dvisvg(1)
for conversion from DVI to SVG
emil(1)
conversion filter for Internet messages
exists(3)
Shortcut version of file_exists() for normal files. Allegro game programming library
expect(1)
programmed dialogue with interactive programs, Version 5
explain_fprintf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_iconv_close_or_die(3)
deallocate conversion descriptor and report errors require_index { "explain_iconv_close_or_die(3)"
explain_iconv_open_or_die(3)
prepare for charset conversion and report errors require_index { "allocate descriptor for character set conversion and report errors" }
explain_iconv_or_die(3)
perform character set conversion and report errors require_index { "perform character set conversion and report errors" }
explain_printf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_snprintf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_sprintf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_vfprintf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_vprintf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_vsnprintf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
explain_vsprintf_or_die(3)
formatted output conversion and report errors require_index { "formatted output conversion and report errors" }
exrgbhsv(3)
RGB <-> HSV color space conversions. Allegro game programming library
ext_file_userip_acl(8)
Restrict users to certain IP addresses, using a text file backend. Version 1.0
extruec(3)
Truecolor pixel format conversions. Allegro game programming library
fastline(3)
Faster version of line(). Allegro game programming library
fdnsspf1(1)
resolve an SPF version 1 record of a hostname
fi_endpoint(3)
Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
fi_version(3)
Version of the library interfaces
fido_cbor_info_new(3), fido_cbor_info_free(3), fido_dev_get_cbor_info(3), fido_cbor_info_aaguid_ptr(3), fido_cbor_info_extensions_ptr(3), fido_cbor_info_protocols_ptr(3), fido_cbor_info_versions_ptr(3), fido_cbor_info_options_name_ptr(3), fido_cbor_info_options_value_ptr(3), fido_cbor_info_aaguid_len(3), fido_cbor_info_extensions_len(3), fido_cbor_info_protocols_len(3), fido_cbor_info_versions_len(3), fido_cbor_info_options_len(3), fido_cbor_info_maxmsgsiz(3), fido_cbor_info_maxcredcntlst(3), fido_cbor_info_maxcredidlen(3), fido_cbor_info_fwversion(3)
FIDO 2 CBOR Info API
filter(7)
cups file conversion filter interface
fixatan2(3)
Fixed point version of the libc atan2() routine. Allegro game programming library
fixmacps(1)
filter to fix Macintosh documents with saner version of md
flickcurl-config(1)
script to get information about the installed version of flickcurl
flip(1)
do newline conversions between **IX and MS-DOS
fltk-config(1)
script to get information about the installed version of fltk
fossil(1)
Distributed Version Control System
g-wrap-config(1)
script to get information about the installed version of G-Wrap
gcin-gb-toggle(1)
gcin's Chinese conversion toggle tool
gdome-config(1)
script to get information about the installed version of gdome2
geometry.tk86(n), geometry(n), tk_library(n), tk_patchLevel(n), tk_strictMotif(n), tk_version(n)
Variables used or set by Tk
get_align_matrix_f(3)
Floating point version of get_align_matrix(). Allegro game programming library
get_camera_matrix_f(3)
Floating point version of get_camera_matrix(). Allegro game programming library
get_color_conversion(3)
Returns the current color conversion mode. Allegro game programming library
get_transformation_matrix_f(3)
Floating point version of get_transformation_matrix(). Allegro game programming library
gfx_mode_select_ex(3)
Extended version of the graphics mode selection dialog. Allegro game programming library
gfx_mode_select_filter(3)
Even more extended version of the graphics mode selection dialog. Allegro game programming library
git-annex-version(1)
show version info
git-bug-version(1)
Show git-bug version information
git-lock(1)
Lock a file excluded from version control
git-range-diff(1)
Compare two commit ranges (e.g. two versions of a branch)
git-svn(1)
Bidirectional operation between a Subversion repository and Git
git-unlock(1)
Unlock a file excluded from version control
glXQueryVersion(3), "glXQueryVersion(3)
return the version numbers of the GLX extension
gluGetString(3), "gluGetString(3)
return a string describing the GLU version or GLU extensions
gnutls_check_version(3)
API function
gnutls_ocsp_req_get_version(3)
API function
gnutls_ocsp_resp_get_version(3)
API function
gnutls_protocol_get_version(3)
API function
gnutls_x509_crl_get_version(3)
API function
gnutls_x509_crl_set_version(3)
API function
gnutls_x509_crq_get_version(3)
API function
gnutls_x509_crq_set_version(3)
API function
gnutls_x509_crt_get_version(3)
API function
gnutls_x509_crt_set_version(3)
API function
gource(1), Gource(1)
a software version control visualization
gpgrt-config(1)
Script to get information about the installed version of libgpg-error
gpicker-simple(1)
non-gui version of gpicker high-performance (file)name chooser
groff_hdtbl(7)
Heidelberger table macros for GNU roff nr groff_hdtbl_C n[.C] Some simple formatting macros. Note that we use '.ig' here and not a comment to make 'mandb' 2.4.1 (and probably more recent versions also) happy; otherwise the '.char' lines and the stuff which follows is included in the 'whatis' database. . [lB] F[n[.fam]][ [rB] F[n[.fam]]] [or] F[n[.fam]]||| [ell] F[n[.fam]].|.|. [oq] F[n[.fam]][oq] [cq] F[n[.fam]][cq] F CR {
gsasl_check_version(3)
API function
gsettings-schema-convert(1)
GConf to GSettings schema conversion
gsl-config(1)
script to get version number and compiler flags of the installed GSL library
gss_check_version(3)
API function
gtk-encode-symbolic-svg(1)
Symbolic icon conversion utility
gunits(1), units(1)
unit conversion and calculation program
gutenfetch_version(3)
-- Get a text string which describes the version of libgutenfetch which is currently being used
h2pas(1)
The C header to pascal unit conversion program
htdump(1)
write out an ASCII-text version of the document database
htload(1)
reads in an ASCII-text version of the document database
hugo-env(1)
Print Hugo version and environment info
hugo-version(1)
Print the version number of Hugo
hwlocality_api_version(3)
API version
icedtea-web(1)
provides a Free Software web browser plugin running applets written in the Java programming language and an implementation of Java Web Start, originally based on the NetX project. NetX allows Java applets and applications to be downloaded over the network, cached, and (by default) run in a secure sandbox environment. Subsequent runs of the applet download the latest version automatically. Update and security settings, among others, can be set using the itw-settings command. icedtea-web also includes a plugin to enable Java applets (http://www.java.com/en/download/testjava.jsp) within web browsers. Names and email addresses of contributors to this project can be found in the file AUTHORS in the IcedTea-Web root directory. The full GPLv2 license of this project can be found in the file COPYING in the IcedTea-Web root directory. News about releases of this project can be found in the file NEWS in the IcedTea-Web root directory
iconv(1)
character set conversion
iconv(1)
charset conversion utility
iconv(3)
charset conversion function
iconv(3)
perform character set conversion
iconv_close(3)
deallocate descriptor for character set conversion
iconv_open(3)
allocate descriptor for character set conversion
iconv_open_into(3)
initialize descriptor for character set conversion
idn2(1)
Libidn2 Internationalized Domain Names conversion tool
idn2.conf(5), .idn2rc(5)
configuration files for idnkit version 2
idn2_check_version(3)
API function
idn_version_unicode(3), idn_version_idnatable(3), idn_version_libidn(3), idn_version_getstring(3)
get a version string about idnkit
ijs-config(1)
script to get information about the installed version of ijs
influxd-version(1)
Display the version of influxdb
initialise_joystick(3)
Deprecated version of install_joystick(). Allegro game programming library
iodbc-config(1)
script to get information about the installed version of iODBC
isc-config.sh(1)
Get information about the installed version of ISC BIND
jclient.pl(1)
sample client for module mode (perl version)
jday(1), j2d(1)
astronomical julian date conversion utilities
kbibtex(1)
a BibTeX editor by KDE written by Thomas Fischer and released under the GPL version 2 or later
kdesvn(1)
A Subversion client by KDE (standalone application)
kermit(1)
C(hyKermit 9.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic (if not advanced) use of C(hyKermit 9.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 9.0 from earlier releases. This document is also available as a Web page at: http://www.columbia.edu/kermit/ckututor.html
keytab2shishi(1)
Shishi host key conversion tool
klondike(6)
an X version of solitaire
kobodl(6)
Kobo Deluxe, an enhanced version of the scrolling game XKobo
krb5_425_conv_principal(3), krb5_425_conv_principal_ext(3), krb5_524_conv_principal(3)
converts to and from version 4 principals
krb5_add_et_list(3), krb5_add_extra_addresses(3), krb5_add_ignore_addresses(3), krb5_context(3), krb5_free_config_files(3), krb5_free_context(3), krb5_get_default_config_files(3), krb5_get_dns_canonize_hostname(3), krb5_get_extra_addresses(3), krb5_get_fcache_version(3), krb5_get_ignore_addresses(3), krb5_get_kdc_sec_offset(3), krb5_get_max_time_skew(3), krb5_get_use_admin_kdc krb5_init_context(3), krb5_init_ets(3), krb5_prepend_config_files(3), krb5_prepend_config_files_default(3), krb5_set_config_files(3), krb5_set_dns_canonize_hostname(3), krb5_set_extra_addresses(3), krb5_set_fcache_version(3), krb5_set_ignore_addresses(3), krb5_set_max_time_skew(3), krb5_set_use_admin_kdc(3)
create, modify and delete krb5_context structures
kvno(1)
print key version numbers of Kerberos principals rst2man-indent-level 0 1 rstReportMargin \$1
kyua-about(1), kyua about(1)
Shows detailed authors, license, and version information
latexdiff-vc(1)
wrapper script that calls latexdiff for different versions of a file under version management (CVS, RCS or SVN)
lav2mpeg(1)
easy conversion of lav files to mpeg
ldns-version(1)
print out the version of the ldns-library and tools on this system
ldns_native2rdf_int8(3), ldns_native2rdf_int16(3), ldns_native2rdf_int32(3), ldns_native2rdf_int16_data(3), ldns_rdf2native_int8(3), ldns_rdf2native_int16(3), ldns_rdf2native_int32(3), ldns_rdf2native_sockaddr_storage(3), ldns_rdf2native_time_t(3)
rdf numeric conversion functions
ldns_pkt2buffer_str(3), ldns_pktheader2buffer_str(3), ldns_rr2buffer_str(3), ldns_rr_list2buffer_str(3), ldns_rdf2buffer_str(3), ldns_key2buffer_str(3), ldns_pkt2buffer_wire(3), ldns_rr2buffer_wire(3), ldns_rdf2buffer_wire(3), ldns_rrsig2buffer_wire(3), ldns_rr_rdata2buffer_wire(3)
lower level conversions
ldns_pkt_edns(3), ldns_pkt_edns_udp_size(3), ldns_pkt_edns_extended_rcode(3), ldns_pkt_edns_version(3), ldns_pkt_edns_z(3), ldns_pkt_edns_data(3), ldns_pkt_set_edns_udp_size(3), ldns_pkt_set_edns_extended_rcode(3), ldns_pkt_set_edns_version(3), ldns_pkt_set_edns_z(3), ldns_pkt_set_edns_data(3)
ldns_pkt ends0 related functions
ldns_rdf2buffer_str_a(3), ldns_rdf2buffer_str_aaaa(3), ldns_rdf2buffer_str_str(3), ldns_rdf2buffer_str_b64(3), ldns_rdf2buffer_str_hex(3), ldns_rdf2buffer_str_type(3), ldns_rdf2buffer_str_class(3), ldns_rdf2buffer_str_alg(3), ldns_rdf2buffer_str_loc(3), ldns_rdf2buffer_str_unknown(3), ldns_rdf2buffer_str_nsap(3), ldns_rdf2buffer_str_wks(3), ldns_rdf2buffer_str_nsec(3), ldns_rdf2buffer_str_period(3), ldns_rdf2buffer_str_tsigtime(3), ldns_rdf2buffer_str_apl(3), ldns_rdf2buffer_str_int16_data(3), ldns_rdf2buffer_str_int16(3), ldns_rdf2buffer_str_ipseckey(3)
lower level to string conversion functions
ldns_rr2str(3), ldns_pkt2str(3), ldns_rdf2str(3), ldns_rr_list2str(3), ldns_key2str(3)
functions for conversions to string
ldns_rr2wire(3), ldns_pkt2wire(3), ldns_rdf2wire(3)
conversion functions
ldns_version(3)
return library version
leafnode-version(1)
print the leafnode version
ledit(1)
line editor, version 2.04
lib3ds-config(1)
script to get information about the installed version of lib3ds
libcurl-symbols(3)
libcurl symbol version information
libmagic(3), magic_open(3), magic_close(3), magic_error(3), magic_errno(3), magic_descriptor(3), magic_buffer(3), magic_getflags(3), magic_setflags(3), magic_check(3), magic_compile(3), magic_list(3), magic_load(3), magic_load_buffers(3), magic_setparam(3), magic_getparam(3), magic_version(3)
Magic number recognition library
libmikmod-config(1)
script to get information about the installed version of libmikmod
libmosquitto(3)
MQTT version 5.0/3.1.1 client library
libssh2_version(3)
return the libssh2 version number
libswscale(3)
video scaling and pixel format conversion library
load_bmp_pf(3)
Packfile version of load_bmp. Allegro game programming library
load_pcx_pf(3)
Packfile version of load_pcx. Allegro game programming library
load_tga_pf(3)
Packfile version of load_tga. Allegro game programming library
load_voc_pf(3)
Packfile version of load_voc. Allegro game programming library
load_wav_pf(3)
Packfile version of load_wav. Allegro game programming library
loadrdsparam(3)
load parameters from symbolic to real conversion. man1/alc_origin.1
log4c-config(1)
script to get information about the installed version of log4c
log_db_daemon(8)
Database logging daemon for Squid Version 0.5
ltversion(1)
switch between different versions of LessTif sets
lunar(1), lunar (version 2.1)(1)
a calendar conversion utility
m17nConv(3m17n), Code Conversion(3m17n)
Coding system objects and API for them
mad_new(3), mad_read(3), mad_write(3), mad_get_version(3), mad_set_version(3), mad_get_card_publisher_sector(3), mad_set_card_publisher_sector(3), mad_get_aid(3), mad_set_aid(3), mad_free(3)
Mifare Application Directory (MAD) Manipulation Functions
makepp_release_notes(1)
-- Major changes in each version of makepp
mariadb-conv(1)
character set conversion utility for MariaDB
maxima(1), Maxima(1)
Common Lisp version of MACSYMA symbolic mathematics package released under the GNU Public License rmaxima - A version of Maxima that supports command autocompletion Xmaxima - A graphical version of Maxima
mdpop3d(8), in.mdpop3d(8)
Post Office Protocol version 3 daemon for Maildirs
medcon(1)
MedCon conversion of medical image formats
medcon(3)
MedCon C project for conversion of medical images
memcached_lib_version(3)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
memcached_version(3)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
mfsmetarestore(8)
doesn't exist in this version of MooseFS
mifare_desfire_connect(3), mifare_desfire_disconnect. mifare_desfire_authenticate(3), mifare_desfire_authenticate_aes(3), mifare_desfire_authenticate_iso(3), mifare_desfire_change_key_settings(3), mifare_desfire_get_key_settings(3), mifare_desfire_change_key(3), mifare_desfire_get_key_version(3), mifare_desfire_create_application(3), mifare_desfire_create_application_3k3des(3), mifare_desfire_create_application_aes(3), mifare_desfire_create_application_iso(3), mifare_desfire_create_application_3k3des_iso(3), mifare_desfire_create_application_aes_iso(3), mifare_desfire_delete_application(3), mifare_desfire_get_application_ids(3), mifare_desfire_free_application_ids(3), mifare_desfire_get_df_names(3), mifare_desfire_select_application(3), mifare_desfire_format_picc(3), mifare_desfire_get_version(3), mifare_desfire_free_mem(3), mifare_desfire_set_configuration(3), mifare_desfire_set_default_key(3), mifare_desfire_set_ats(3), mifare_desfire_get_card_uid(3), mifare_desfire_get_file_ids(3), mifare_desfire_get_iso_file_ids(3), mifare_desfire_get_file_settings(3), mifare_desfire_change_file_settings(3), mifare_desfire_create_std_data_file(3), mifare_desfire_create_std_data_file_iso(3), mifare_desfire_create_backup_data_file(3), mifare_desfire_create_backup_data_file_iso(3), mifare_desfire_create_value_file(3), mifare_desfire_create_linear_record_file(3), mifare_desfire_create_linear_record_file_iso(3), mifare_desfire_create_cyclic_record_file(3), mifare_desfire_create_cyclic_record_file_iso(3), mifare_desfire_delete_file(3), mifare_desfire_read_data(3), mifare_desfire_read_data_ex(3), mifare_desfire_write_data(3), mifare_desfire_write_data_ex(3), mifare_desfire_get_value(3), mifare_desfire_get_value_ex(3), mifare_desfire_credit(3), mifare_desfire_credit_ex(3), mifare_desfire_debit(3), mifare_desfire_debit_ex(3), mifare_desfire_limited_credit(3), mifare_desfire_limited_credit_ex(3), mifare_desfire_write_record(3), mifare_desfire_write_record_ex(3), mifare_desfire_read_records(3), mifare_desfire_read_records_ex(3), mifare_desfire_clear_record_file(3), mifare_desfire_commit_transaction(3), mifare_desfire_abort_transaction(3)
Mifare DESFire Manipulation Functions
mifare_desfire_des_key_new(3), mifare_desfire_3des_key_new(3), mifare_desfire_3k3des_key_new(3), mifare_desfire_aes_key_new(3), mifare_desfire_des_key_new_with_version(3), mifare_desfire_3des_key_new_with_version(3), mifare_desfire_3k3des_key_new_with_version(3), mifare_desfire_aes_key_new _with_version(3), mifare_desfire_key_get_version(3), mifare_desfire_key_set_version(3), mifare_desfire_key_free(3)
Mifare DESFire keys Manipulation Functions
miktex-luatex(1)
an extended version of pdfTeX using Lua as an embedded scripting language
mime.convs(5)
mime type conversion file for cups (deprecated)
mkromdic(1)
To compile romaji-kana conversion table
mosquitto_pub(1)
an MQTT version 5/3.1.1/3.1 client for publishing simple messages
mosquitto_rr(1)
an MQTT version 5/3.1.1 client for request/response messaging
mosquitto_sub(1)
an MQTT version 5/3.1.1/3.1 client for subscribing to topics
msgconv(1)
character set conversion for message catalog
mtn(1), monotone(1)
a distributed version control system
mxformat(1)
Text data set conversion/merging tool of the McXtrace X-ray trace simulation package
n2n(7), N2n Version 2(7)
version 2 of the n2n decentralised peer-to-peer network overlay VPN
ne_version_match(3), ne_version_string(3)
library versioning
need_uconvert(3)
Tells if a string requires encoding conversion. Allegro game programming library
negotiate_kerberos_auth(8)
Squid kerberos based authentication helper Version 3.0.4sq
netatalk-config(1)
script to get information about the installed version of netatalk
netmask(1)
a netmask generation and conversion program
netpipes(1)
a package to manipulate BSD TCP/IP stream sockets version 4.2
nettoe(6)
Networked version of Tic Tac Toe for the console
nsd(8)
Name Server Daemon (NSD) version 4.3.6
nsf(1)
murata version of 'Shell Form'
nurbs++-config(1)
script to get information about the installed version of nurbs++
oath_check_version(3)
API function
ocf_heartbeat_IPaddr(7)
Manages virtual IPv4 addresses (portable version)
ocf_heartbeat_IPaddr2(7)
Manages virtual IPv4 and IPv6 addresses (Linux specific version)
oggz-known-codecs(1)
List codecs known by this version of Oggz
opam(1)
adminN'45'addN'45'constraint N'45' Adds version constraints on all dependencies towards a given package
opam(1)
adminN'45'upgrade N'45' Upgrades repository from earlier opam versionsN'46'
opam-pin(1), opamN'45'pin(1)
N'45' Pin a given package to a specific version or sourceN'46'
opam-upgrade(1), opamN'45'upgrade(1)
N'45' Upgrade the installed package to latest versionN'46'
openssl-pkcs8(1), pkcs8(1)
PKCS#8 format private key conversion tool
openssl-pkcs8(1ossl)
PKCS#8 format private key conversion command
openssl-version(1), version(1)
print OpenSSL version information
openssl-version(1ossl)
print OpenSSL version information
optionPrintVersion(3)
Print the program version
optionPrintVersionAndReturn(3)
Print the program version
optionVersion(3)
return the compiled AutoOpts version number
os_version(3), os_revision(3)
Version of the OS currently running. Allegro game programming library
ovsdb-server(5)
_Server database schema Every ovsdb-server (version 2[char46]9 or later) always hosts an instance of this schema, which holds information on the status and configuration of the server itself[char46] This database is read-only[char46] This manpage describes the schema for this database[char46]
package.tcl85(n), package(n)
Facilities for package loading and version control
package.tcl86(n), package(n)
Facilities for package loading and version control
package.tcl87(n), package(n)
Facilities for package loading and version control
panda_xsnprintf(3)
a safe version of vnsprintf
pas2ut(1)
The Free Pascal unit to unit test case conversion tool
pcap_lib_version(3)
get the version information for libpcap
pcap_major_version(3), pcap_minor_version(3)
get the version number of a savefile
pcre16_version(3), PCRE(3)
Perl-compatible regular expressions
pdfattach(1)
Portable Document Format (PDF) document embedded file creator (version 3.03)
pdfdetach(1)
Portable Document Format (PDF) document embedded file extractor (version 3.03)
pdffonts(1)
Portable Document Format (PDF) font analyzer (version 3.03)
pdfimages(1)
Portable Document Format (PDF) image extractor (version 3.03)
pdfinfo(1)
Portable Document Format (PDF) document information extractor (version 3.03)
pdfresurrect(1)
tool for extracting versioning data from PDF documents
pdftoppm(1)
Portable Document Format (PDF) to Portable Pixmap (PPM) converter (version 3.03)
pdftops(1)
Portable Document Format (PDF) to PostScript converter (version 3.03)
pdftotext(1)
Portable Document Format (PDF) to text converter (version 3.03)
pfbtopfa(1)
PFB to PFA conversion
pg_config(1)
retrieve information about the installed version of PostgreSQL
pkg-shlib(8), pkg shlib(8)
display which installed package provides a specfic shared library, and the installed packages which require it library is the filename of the library without any leading path, but including the ABI version number. Only exact matches are handled
pkg-version(8), pkg version(8)
summarize installed versions of packages
playumidi(1)
play standard midi-file format 0/1 for FreeBSD USB-MIDI device (support Multi-Byte Language Text version)
ple-config(1)
Script to get information about the installed version of the PLE library
pnetcdf_version(1)
print the version information of PnetCDF library
portscout(1)
A tool to scan for new versions of FreeBSD ports
portversion(1)
a tool to compare the versions of installed packages with the ones in the ports tree
poudriere-version(8)
show the current version
prboom(6)
PrBoom, a version of Doom for Unix, Linux and Windows systems
psiconv-config(1)
script to get information about the installed version of Psiconv
pskc_check_version(3)
API function
pskc_get_version(3)
API function
pskc_set_version(3)
API function
pullcves(1)
Update the local cvechecker CVE database and version matching rules
pvm(1)
PVM version 3 console
pvm_advise(3), pvm_advise()(3)
Controls use of direct task-to-task routing. [In Version 3.2: Replaced by pvm_setopt]
pvm_delete(3)
delete data from pvmd database [In Version 3.4: Relaced by pvm_delinfo]
pvm_getmwid(3), pvm_setmwid(3)
Get or set wait ID of a message. [In Version 3.4: Relaced by pvm_getminfo and pvm_setminfo]
pvm_insert(3)
store data in pvmd database [In Version 3.4: Relaced by pvm_putinfo]
pvm_lookup(3)
retrieve data from pvmd database [In Version 3.4: Relaced by pvm_getinfo]
pvm_serror(3)
Sets automatic error message printing on or off. [In Version 3.2: Replaced by pvm_setopt]
pws_version(3), libpwstor(3)
Password storage library
pws_version_int(3), libpwstor(3)
Password storage library
qiv(1)
a fast gdk/imlib image viewer for X. Version: 2.3.2, released on 2017-11-03 by Andy Spiegl - http://qiv.spiegl.de/ - qiv.andy@spiegl.de originally by Adam Kopacz / KLOGRAFX.DE Network http://www.klografx.net/qiv/ - adam.k@klografx.de
qtchooser(1)
a wrapper used to select between Qt development binary versions
quat_slerp(3)
Version of quat_interpolate() allowing control over the rotation. Allegro game programming library
r3dtops(l)
Raster3D to PostScript label conversion
rancid-cvs(1)
initialize CVS, Subversion or git and rancid group files and directories
raptor-config(1)
script to get information about the installed version of Raptor
rasqal-config(1)
script to get information about the installed version of the RDF query library
redland-config(1)
script to get information about the installed version of Redland
refchan.tcl85(n), refchan(n)
Command handler API of reflected channels, version 1
restic-version(1)
Print version information
roundtrip(1)
a comparison program for testing roundtrip conversion
rsvndump(1)
Dumps a remote Subversion repository
sane-config(1)
get information about the installed version of libsane
save_bmp_pf(3)
Packfile version of save_bmp. Allegro game programming library
save_pcx_pf(3)
Packfile version of save_pcx. Allegro game programming library
save_tga_pf(3)
Packfile version of save_tga. Allegro game programming library
scan.tcl85(n), scan(n)
Parse string using conversion specifiers in the style of sscanf
scan.tcl86(n), scan(n)
Parse string using conversion specifiers in the style of sscanf
scan.tcl87(n), scan(n)
Parse string using conversion specifiers in the style of sscanf
sclient(1)
sample Kerberos version 5 client rst2man-indent-level 0 1 rstReportMargin \$1
sdcv(1)
console version of StarDict program
security_file_certgen(8)
SSL certificate generator for Squid. Version 1.1
select_palette(3)
Sets the internal palette for color conversion. Allegro game programming library
set_blender_mode_ex(3)
An even more complex version of set_blender_mode(). Allegro game programming library
set_color_conversion(3)
Tells Allegro how to convert images during loading time
set_ucodepage(3)
Sets 8-bit to Unicode conversion tables. Allegro game programming library
sf2extract(1)
Extract samples from SoundFont version 2 (.sf2) files
sftpgo-revertprovider(1)
Revert the configured data provider to a previous version
sha1-hashcash(1), sha1(1)
Secure Hash Algorithm (version 1) hash function
shishi_check_version(3)
API function
shishi_key_version(3)
API function
shishi_key_version_set(3)
API function
shtk_version(3), version(3)
Utilities to check the running version of shtk
shtk_version_at_least(3)
Checks if shtk is a minimum version
shtk_version_at_most(3)
Checks if shtk is a maximum version
shtk_version_is(3)
Checks if shtk is a specific version
shtool-version(1), shtool version(1)
GNU shtool maintain version information file
sim2trad(1), trad2sim(1)
clipboard data conversion for traditional Chinese and simplified Chinese
smalledit(1), Smalledit-3.17.20(1)
Stripped down version of Cooledit - a full-featured text editor for the X Window System
snobol4logic(3)
bitwise logic and conversions for SNOBOL4
sqlite3(1)
A command line interface for SQLite version 3
ssed(1), super-sed(1)
manual page for super-sed version 3.61
sserver(8)
sample Kerberos version 5 server rst2man-indent-level 0 1 rstReportMargin \$1
stalonetray(1)
stand-alone system tray (notification area) implementation. This document covers 0.8 version of stalonetray
string_enquote(3), string_dequote(3)
doubly quoted string conversion routines
stringprep_check_version(3)
API function
strtotime(3), timetostr(3)
date and time conversions
structs_xml_input(3), structs_xml_output(3)
XML conversion for data structures
svn(1)
Subversion command line client tool
svn2cl(1)
Create a ChangeLog from a subversion log
svnadmin(1)
Subversion repository administration tool
svndumpfilter(1)
Filter a subversion repository 'dumpfile'
svnlook(1)
Subversion repository examination tool
svnmucc(1)
Multiple URL Command Client for Subversion
svnrdump(1)
Subversion remote repository dumper and loader
svnsync(1)
Subversion repository synchronization tool
svnup(1)
A lightweight, dependency-free program to pull source from an Apache Subversion server
svnversion(1)
Produce a compact version identifier for a working copy
synergyc(1)
manual page for synergyc 1.11.0-stable, protocol version 1.6
synergys(1)
manual page for synergys 1.11.0-stable, protocol version 1.6
sysctlmibinfo(3), SYSCTLMIF_VERSION(3), SYSCTLMIF_MAXIDLEVEL(3), sysctlmif_nametoid(3), sysctlmif_name(3), SYSCTLMIF_NAMELEN(3), sysctlmif_desc(3), SYSCTLMIF_DESCLEN(3), sysctlmif_label(3), SYSCTLMIF_LABELLEN(3), sysctlmif_info(3), SYSCTLMIF_INFOKIND(3), SYSCTLMIF_INFOTYPE(3), SYSCTLMIF_INFOFLAGS(3), SYSCTLMIF_INFOFMT(3), sysctlmif_nextnode(3), sysctlmif_nextleaf(3), sysctlmif_object(3), sysctlmif_freeobject(3), sysctlmif_filterlist(3), SYSCTLMIF_LIST(3), SYSCTLMIF_MAXDEPTH(3), sysctlmif_grouplist(3), sysctlmif_freelist(3), sysctlmif_tree(3), sysctlmif_freetree(3), sysctlmif_mib(3), sysctlmif_freemib(3)
sysctl MIB-Tree API
sysctlmibinfo2(3), SYSCTLMIF_VERSION(3), sysctlmif_name(3), sysctlmif_oidbyname(3), sysctlmif_oidextendedbyname(3), sysctlmif_desc(3), sysctlmif_descbyname(3), sysctlmif_label(3), sysctlmif_labelbyname(3), sysctlmif_fmt(3), sysctlmif_fmtbyname(3), sysctlmif_hashandler(3), sysctlmif_hashandlerbyname(3), sysctlmif_kind(3), sysctlmif_kindbyname(3), SYSCTLMIF_KINDTYPE(3), SYSCTLMIF_KINDFLAGS(3), sysctlmif_nextnode(3), sysctlmif_nextnodebyname(3), sysctlmif_nextleaf(3), sysctlmif_nextleafbyname(3), sysctlmif_object(3), sysctlmif_objectbyname(3), sysctlmif_freeobject(3), sysctlmif_list(3), sysctlmif_grouplist(3), sysctlmif_grouplistbyname(3), sysctlmif_leaves(3), sysctlmif_leavesbyname(3), sysctlmif_freelist(3), sysctlmif_tree(3), sysctlmif_treebyname(3), sysctlmif_freetree(3), sysctlmif_mib(3), sysctlmif_freemib(3)
sysctl MIB-Tree API
teckit_compile(1)
manual page for command line error at --version
tidy(1)
validate, correct, and pretty-print HTML files (version: 7 December 2008)
tiffcheck(8c)
check for conversion requirements
tiffgt(1)
display an image stored in a TIFF file (Silicon Graphics version)
tile(n)
Tiling versions of Tk widgets
tkcvs(1), TkCVS(1)
a Tk/Tcl Graphical Interface to CVS and Subversion
tls_conn_version(3), tls_conn_cipher(3), tls_conn_cipher_strength(3), tls_conn_alpn_selected(3), tls_conn_servername(3), tls_conn_session_resumed(3), tls_peer_cert_provided(3), tls_peer_cert_contains_name(3), tls_peer_cert_chain_pem(3), tls_peer_cert_issuer(3), tls_peer_cert_subject(3), tls_peer_cert_hash(3), tls_peer_cert_notbefore(3), tls_peer_cert_notafter(3)
inspect an established TLS connection
torrus_action_snmptrap(7), action_snmptrap(7), action_snmpv1trap(7)
Scripts for sending SNMP traps (version 2c and 1 respectively) from monitor action. "action_snmpv1trap" is obsolete as the preferred SNMP version is 2c
tpm_version(1)
report TPM version and manufacturer information
transicc(1)
little cms ColorSpace conversion calculator
ts_libversion(3)
get version information on the currently running tslib
tse3(3)
Trax Sequencer Engine library version 3.0
tslib_version(3)
simply return tslib's version string
ttf2pt1_convert(1)
convenience font conversion script
tuc(1)
Text to Unix Conversion (v1.10)
tvmet-config(1)
script to get information about the installed version of tvmet
typerules(5f)
file type identification and conversion rules
uconvert(3)
High level string encoding conversion wrapper. Allegro game programming library
uconvert_size(3)
Number of bytes needed to store a string after conversion. Allegro game programming library
unicode::iconvert::convert(3), unicode::ucs_4(3), unicode::ucs_2(3), unicode::utf_8(3), unicode::iso_8859_1(3)
unicode character set conversion
unicode::iconvert::convert_tocase(3)
unicode uppercase, lowercase, and titlecase conversion
unicode::tolower(3), unicode::toupper(3)
unicode version of tolower(3) and toupper(3)
unicode_u_ucs4_native(3), unicode_u_ucs2_native(3), unicode_convert_init(3), unicode_convert(3), unicode_convert_deinit(3), unicode_convert_tocbuf_init(3), unicode_convert_tou_init(3), unicode_convert_fromu_init(3), unicode_convert_uc(3), unicode_convert_tocbuf_toutf8_init(3), unicode_convert_tocbuf_fromutf8_init(3), unicode_convert_toutf8(3), unicode_convert_fromutf8(3), unicode_convert_tobuf(3), unicode_convert_tou_tobuf(3), unicode_convert_fromu_tobuf(3)
unicode character set conversion
upgrade_shared_repository(1), upgrade_shared_repository.pl(1)
Migrating shared repository created by earlier versions
vercmp(8)
version comparison utility
vga_runinbackground_version(3)
returns the version of the current background support
vimdiff(1)
edit between two and eight versions of a file with Vim and show differences
vmod_ip2proxy(3), IP2Proxy Varnish Module(3)
An Varnish module that enables the user to find the country, region, city, ISP and proxy information by IP address. The module reads the proxy information from IP2Proxy BIN data file. This module currently only support Varnish version 6.2. Required IP2Proxy C Library (%https://github.com/ip2location/ip2proxy-c) to work. Please view readme.md for details
weechat-headless(1)
the extensible chat client (headless version)
whatmask(1)
Subnet mask notation conversion tool
wso_login(3), wso_logout(3), wso_query(3), wso_version(3)
API functions to access whoson database
wvVersion(1)
view word document's version #
x11vnc(1)
allow VNC connections to real X11 displays version: 0.9.16, lastmod: 2019-01-05
xapian-config(1)
report information about the installed version of xapian
xbomb(6), xbomb Version 2(6)
a version of the popular minesweeper program with some novel features
xdlight(1)
a diet version of XDiary
xfig(1)
Facility for Interactive Generation of figures under X11 Version 3.2.8a
xgalaga(6x)
X11 version of the famous Galaga game
xgalaga-sdl(6x)
SDL port of XGalaga, version of the famous Galaga game
xine-config(1)
script to get information about the installed version of libxine
xmedcon-config(1)
script to get info about the installed version of (X)MedCon
xml2-config(1), xml-config(1)
script to get information about the installed version of GNOME-XML
xml2stems(1)
Verilator XML to rtlbrowse stems conversion
xmlsec1-config(1)
detail installed version of xmlsec library
xneur(1), XNeur(1)
in-place conversion of text typed in with a wrong keyboard layout
xo_set_version(3), xo_set_version_h(3)
record content-version information in encoded output
xosd-config(1)
script to get information about the installed version of libxosd
xs_version(3)
report Crossroads library version
xtet42(6)
X version of tetris
xtic(1)
X version of a simple but tricky board game
yaz-iconv(1)
YAZ Character set conversion utility
yaz-record-conv(1)
YAZ Record Conversion Utility
zfs-upgrade(8)
manage on-disk version of ZFS filesystems
zip_libzip_version(3)
return run-time version of library
zmq_socket_monitor_versioned(3)
monitor socket events
zmq_version(3)
report 0MQ library version
zpool-upgrade(8)
manage version and feature flags of ZFS storage pools
9pclient(3), CFid(3), CFsys(3), fsinit(3), fsmount(3), fsroot(3), fssetroot(3), fsunmount(3), nsinit(3), nsmount(3), fsversion(3), fsauth(3), fsattach(3), fsclose(3), fscreate(3), fsfcreate(3), fsremove(3), fsfremove(3), fsaccess(3), fsdirread(3), fsdirreadall(3), fsdirstat(3), fsdirfstat(3), fsdirwstat(3), fsdirfwstat(3), fsopen(3), fsfopen(3), nsopen(3), fsopenfd(3), fspread(3), fspwrite(3), fsread(3), fsreadn(3), fsseek(3), fswrite(3), fsprint(3), fsvprint(3)
9P client library
AWS::Signature4(3)
Create a version4 signature for Amazon Web Services
Algorithm::Accounting::Report::Text(3)
generate text version report
Algorithm::Evolutionary::Fitness::wP_Peaks(3), Algorithm::Evolutionary::Fitness::wP_Peaks(3)
wP Peaks problem generator - weighted version of P_Peaks
Alien::Build::Plugin::Prefer::BadVersion(3)
Plugin to filter out known bad versions
Alien::Build::Plugin::Prefer::GoodVersion(3)
Plugin to filter known good versions
Alien::Build::Plugin::Prefer::SortVersions(3)
Plugin to sort candidates by most recent first
Alien::Build::Version::Basic(3)
Very basic version object for Alien::Build
AnyEvent::Impl::FLTK(3)
AnyEvent adaptor for FLTK (Fast Light Toolkit version two)
AnyEvent::XMPP::Ext::Version(3)
Software version
Apache::AuthTicket::Base(3)
Common methods for all Apache::AuthTicket versions
App::CLI::Command::Version(3)
Print a preformatted version string
App::Cmd::Command::version(3)
display an app's version
BcVersions(3)
ByteLoader bytecode versions
BerkeleyDB(3)
Perl extension for Berkeley DB version 2, 3, 4, 5 or 6
Bio::DB::SoapEUtilities::FetchAdaptor(3)
Conversion of Entrez SOAP messages to BioPerl objects
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Bio::Root::Version(3)
don't use, get version from each module
Bio::Tools::Run::Phylo::LVB(3)
Object for using the LVB program to create an array of Bio::Tree objects from a nucleotide multiple alignment file or a nucleotide SimpleAlign object. Works with LVB version 2.1
Bio::Tools::Run::Phylo::Phylip::Neighbor(3)
Wrapper for the phylip program neighbor by Joseph Felsenstein for creating a phylogenetic tree(either through Neighbor or UPGMA) based on protein distances based on amino substitution rate. 14 Nov 2002 Shawn Works with Phylip version 3.6
Bio::Tools::Run::Phylo::Phylip::ProtPars(3)
Object for creating a Bio::Tree object from a multiple alignment file or a SimpleAlign object 14 Nov 2002 Shawn Works with Phylip version 3.6
Brackup::Dict::SQLite2(3)
key-value dictionary implementation, using a SQLite database for storage (lighter/slower version of Brackup::Dict::SQLite)
CGI::Enurl(3), CGI::Enurl.pm(3)
module for URL-encoding strings and hashes version 1.07
CPAN::DistnameInfo(3)
Extract distribution name and version from a distribution filename
CPAN::Meta::History::Meta_1_0(3)
Version 1.0 metadata specification for META.yml
CPAN::Meta::History::Meta_1_1(3)
Version 1.1 metadata specification for META.yml
CPAN::Meta::History::Meta_1_2(3)
Version 1.2 metadata specification for META.yml
CPAN::Meta::History::Meta_1_3(3)
Version 1.3 metadata specification for META.yml
CPAN::Meta::History::Meta_1_4(3)
Version 1.4 metadata specification for META.yml
CPAN::Meta::Requirements(3)
a set of version requirements for a CPAN dist
CPAN::Testers::Fact::InstalledModules(3)
Versions of particular modules installed on a system
CPAN::Version(3)
utility functions to compare CPAN versions
Carton::Doc::Version(3)
Display version
Catalyst::Delta(3)
Overview of changes between versions of Catalyst
Catalyst::Plugin::Cache::Curried(3)
Curried versions of "cache_set", "cache_get" and "cache_remove" that look more like a backend
Chart::Clicker::Decoration::Legend::Tabular(3)
Tabular version of Legend
Class::Gomor::Array(3)
class and object builder, array version
Class::Gomor::Hash(3)
class and object builder, hash version
Config::Options::Threaded(3)
Threaded version of module to provide a configuration hash with option to read from file
Config::Versioned(3)
Simple, versioned access to configuration data
Convert::Bencode_XS(3)
Faster conversions to/from Bencode format
Convert::Binary::C(3)
Binary Data Conversion using C Types
Convert::Color(3), "Convert::Color"(3)
color space conversions and named lookups
Crypt::Format(3)
Conversion utilities for encryption applications
Crypt::PWSafe3::Databaseformat(3), PasswordSafe(3)
database format description version 3.03
Crypt::RSA::DataFormat(3)
Data creation, conversion and reporting primitives
Crypt::SSLeay::Version(3)
Obtain OpenSSL version information
Cyrus::IMAP::Shell(3)
Perl version of cyradm
Cz::Cstocs(3)
conversions of charset encodings for the Czech language
DBD::Excel(3)
A class for DBI drivers that act on Excel File. This is still alpha version
DBIx::Class::DeploymentHandler::HandlesVersionStorage(3)
Interface for version storage methods
DBIx::Class::DeploymentHandler::HandlesVersioning(3)
Interface for version methods
DBIx::Class::DeploymentHandler::VersionHandler::DatabaseToSchemaVersions(3)
Go straight from Database to Schema version
DBIx::Class::DeploymentHandler::VersionHandler::ExplicitVersions(3)
Define your own list of versions to use for migrations
DBIx::Class::DeploymentHandler::VersionHandler::Monotonic(3)
Obvious version progressions
DBIx::Class::DeploymentHandler::VersionStorage::Deprecated(3)
(DEPRECATED) Use this if you are stuck in the past
DBIx::Class::DeploymentHandler::VersionStorage::Deprecated::Component(3)
(DEPRECATED) Attach this component to your schema to ensure you stay up to date
DBIx::Class::DeploymentHandler::VersionStorage::Deprecated::VersionResult(3)
(DEPRECATED) The old way to store versions in the database
DBIx::Class::DeploymentHandler::VersionStorage::Deprecated::VersionResultSet(3)
(DEPRECATED) Predefined searches to find what you want from the version storage
DBIx::Class::DeploymentHandler::VersionStorage::Standard(3)
Version storage that does the normal stuff
DBIx::Class::DeploymentHandler::VersionStorage::Standard::Component(3)
Attach this component to your schema to ensure you stay up to date
DBIx::Class::DeploymentHandler::VersionStorage::Standard::VersionResult(3)
The typical way to store versions in the database
DBIx::Class::DeploymentHandler::VersionStorage::Standard::VersionResultSet(3)
Predefined searches to find what you want from the version storage
DBIx::Class::Migration::Script::Help::install(3)
Install a migration version
DBIx::Class::Migration::Script::Help::install_version_storage(3)
Add missing meta data table
DBIx::Class::Migration::Script::Help::to_version(3)
Specify a particular target migration version
DBIx::Class::Migration::Script::Help::version(3)
version status
DBIx::Class::Schema::Loader::Manual::UpgradingFromV4(3)
Important Information Related to Upgrading from Version 0.04006
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3)
Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_040(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.04006
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_05(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.05003
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_06(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.06000
DBIx::Class::Schema::Loader::RelBuilder::Compat::v0_07(3)
RelBuilder for compatibility with DBIx::Class::Schema::Loader version 0.07000
DBIx::Class::Schema::Versioned(3)
DBIx::Class::Schema plugin for Schema upgrades
DBIx::VersionedDDL(3)
Upgrade and downgrade database schemas to a specified version
DBIx::VersionedDDL::Plugin::DefaultScriptProcessor(3)
default plugin to process version scripts. Plugins are required to provide a method process_script which takes path to version script as an argument and returns a list of SQL statements
DB_File(3)
Perl5 access to Berkeley DB version 1.x
Dancer2::CLI::Version(3)
Display Dancer2 version
Data::Lazy(3), Data::Lazy.pm(3)
"lazy" (defered/on-demand) variables version 0.6 (obsoletes and replaces Lazy.pm)
Date::Japanese::Era(3)
Conversion between Japanese Era / Gregorian calendar
Date::Japanese::Era::Table(3)
Conversion Table for Date::Japanese::Era
Date::Japanese::Era::Table::JIS_X0301(3)
yet another conversion Table for Date::Japanese::Era
DateTime::Format::HTTP(3)
Date conversion routines
Devel::Caller(3)
meatier versions of "caller"
Devel::Ditto::Color(3)
Color version of Devel::Ditto
Devel::Ditto::Colour(3)
Colour version of Devel::Ditto
Digest::Nilsimsa(3)
Perl version of Nilsimsa code
Dist::CheckConflicts(3)
declare version conflicts for your dist
Dist::Joseki::Command::version(3)
'version' command for Dist::Joseki::Cmd
Dist::Joseki::Version(3)
Get and set version numbers within the distribution
Dist::Zilla::App::Command::version(3)
display dzil's version
Dist::Zilla::Plugin::AutoVersion(3)
take care of numbering versions so you don't have to
Dist::Zilla::Plugin::PkgVersion(3)
add a $VERSION to your packages
Dist::Zilla::Plugin::PodVersion(3)
add a VERSION head1 to each Perl document
Dist::Zilla::Role::VersionProvider(3)
something that provides a version number for the dist
Encode::Base58::GMP(3)
High speed Base58 encoding using GMP with BigInt and MD5 support For version 1.0 upgrades, please read the INCOMPATIBLE CHANGES section below
FFI::Platypus::TypeParser::Version0(3)
FFI Type Parser Version Zero
FFI::Platypus::TypeParser::Version1(3)
FFI Type Parser Version One
File::Find::Rule::VCS(3)
Exclude files/directories for Version Control Systems
File::Path::Tiny(3)
recursive versions of mkdir() and rmdir() without as much overhead as File::Path
File::Stat::ModeString(3)
conversion file stat(2) mode to/from string representation
Finance::Currency::Convert::WebserviceX(3)
Lightweight currency conversion using WebserviceX.NET
Finance::Currency::Convert::XE(3)
Currency conversion module
GPS::OID(3)
Package for GPS PRN - Object ID conversions
Games::FrozenBubble(3)
arcade/reflex game - THIS IS A BETA VERSION
Geo::Coordinates::UTM(3)
Perl extension for Latitiude Longitude conversions
Git::Version::Compare(3)
Functions to compare Git versions
Glib::version(3)
Library Versioning Utilities
GraphQL::Type::NonNull(3)
GraphQL type that is a non-null version of another type
Graphics::ColorUtils(3)
Easy-to-use color space conversions and more
Gtk2::Pango::version(3)
backwards compatibility wrapper for Pango::version
Gtk2::version(3)
Library Version Information
HTML::Entities::Numbered(3)
Conversion of numbered HTML entities
HTML::FormatText::WithLinks(3)
HTML to text conversion with links as footnotes
HTTP::BrowserDetect(3)
Determine Web browser, version, and platform from an HTTP user agent string
HTTP::Date(3)
HTTP::Date - date conversion routines
HTTP::Server::Simple::CGI(3)
CGI.pm-style version of HTTP::Server::Simple
HTTP::Throwable::Role::Status::HTTPVersionNotSupported(3)
505 HTTP Version Not Supported
Hash::AutoHash::Args::V0(3)
Object-oriented processing of argument lists (version 0)
Hash::WithDefaults(3), Hash::WithDefaults (3)
class for hashes with key-casing requirements supporting defaults version 0.05
I18N::Charset(3)
IANA Character Set Registry names and Unicode::MapUTF8 (et al.) conversion scheme names
IO::Lambda::Compat(3)
compatibility with pre-v1.00 version API
IO::Socket::Socks(3)
Provides a way to create socks client or server both 4 and 5 version
IOC(3)
A lightweight IOC (Inversion of Control) framework
Interpolation(3)
Arbitrary string interpolation semantics (using tie()) Version 0.74 Originaly by Mark-Jason Dominus (mjd-perl-interpolation@plover.com) Since version 0.66 maintained by Jenda@Krynicky.cz
JSON::RPC::Common::Procedure::Call::Version_1_0(3)
JSON-RPC 1.0 request
JSON::RPC::Common::Procedure::Call::Version_1_1(3)
JSON-RPC 1.1 Procedure Call
JSON::RPC::Common::Procedure::Call::Version_2_0(3)
JSON-RPC 2.0 Procedure Call
JSON::RPC::Common::Procedure::Return::Version_1_0(3)
JSON-RPC 1.0 error class
JSON::RPC::Common::Procedure::Return::Version_1_0::Error(3)
JSON-RPC 1.0 error class
JSON::RPC::Common::Procedure::Return::Version_1_1(3)
JSON-RPC 1.1 Procedure Return
JSON::RPC::Common::Procedure::Return::Version_1_1::Error(3)
JSON-RPC 1.1 error class
JSON::RPC::Common::Procedure::Return::Version_2_0(3)
JSON-RPC 2.0 Procedure Return
JSON::RPC::Common::Procedure::Return::Version_2_0::Error(3)
JSON-RPC 2.0 error class
JSON::Validator::Schema::OpenAPIv2(3)
OpenAPI version 2 / Swagger
JSON::Validator::Schema::OpenAPIv3(3)
OpenAPI version 3
JSON::XS::VersionOneAndTwo(3)
Support versions 1 and 2 of JSON::XS
JavaScript::Packer(3)
Perl version of Dean Edwards' Packer.js
LW2(3pm)
Perl HTTP library version 2.5
Locale::Recode(3)
Object-Oriented Portable Charset Conversion
Locale::Recode::_Conversions(3)
Internal Table of Known Conversions
Locale::RecodeData::ASMO_449(3)
Conversion routines for ASMO_449
Locale::RecodeData::ATARI_ST(3)
Conversion routines for ATARI-ST
Locale::RecodeData::ATARI_ST_EURO(3)
Conversion routines for ATARI-ST-EURO
Locale::RecodeData::CP10007(3)
Conversion routines for CP10007
Locale::RecodeData::CP1250(3)
Conversion routines for CP1250
Locale::RecodeData::CP1251(3)
Conversion routines for CP1251
Locale::RecodeData::CP1252(3)
Conversion routines for CP1252
Locale::RecodeData::CP1253(3)
Conversion routines for CP1253
Locale::RecodeData::CP1254(3)
Conversion routines for CP1254
Locale::RecodeData::CP1256(3)
Conversion routines for CP1256
Locale::RecodeData::CP1257(3)
Conversion routines for CP1257
Locale::RecodeData::CSN_369103(3)
Conversion routines for CSN_369103
Locale::RecodeData::CWI(3)
Conversion routines for CWI
Locale::RecodeData::DEC_MCS(3)
Conversion routines for DEC_MCS
Locale::RecodeData::EBCDIC_AT_DE(3)
Conversion routines for EBCDIC_AT_DE
Locale::RecodeData::EBCDIC_AT_DE_A(3)
Conversion routines for EBCDIC_AT_DE_A
Locale::RecodeData::EBCDIC_CA_FR(3)
Conversion routines for EBCDIC_CA_FR
Locale::RecodeData::EBCDIC_DK_NO(3)
Conversion routines for EBCDIC_DK_NO
Locale::RecodeData::EBCDIC_DK_NO_A(3)
Conversion routines for EBCDIC_DK_NO_A
Locale::RecodeData::EBCDIC_ES(3)
Conversion routines for EBCDIC_ES
Locale::RecodeData::EBCDIC_ES_A(3)
Conversion routines for EBCDIC_ES_A
Locale::RecodeData::EBCDIC_ES_S(3)
Conversion routines for EBCDIC_ES_S
Locale::RecodeData::EBCDIC_FI_SE(3)
Conversion routines for EBCDIC_FI_SE
Locale::RecodeData::EBCDIC_FI_SE_A(3)
Conversion routines for EBCDIC_FI_SE_A
Locale::RecodeData::EBCDIC_FR(3)
Conversion routines for EBCDIC_FR
Locale::RecodeData::EBCDIC_IS_FRISS(3)
Conversion routines for EBCDIC_IS_FRISS
Locale::RecodeData::EBCDIC_IT(3)
Conversion routines for EBCDIC_IT
Locale::RecodeData::EBCDIC_PT(3)
Conversion routines for EBCDIC_PT
Locale::RecodeData::EBCDIC_UK(3)
Conversion routines for EBCDIC_UK
Locale::RecodeData::EBCDIC_US(3)
Conversion routines for EBCDIC_US
Locale::RecodeData::ECMA_CYRILLIC(3)
Conversion routines for ECMA_CYRILLIC
Locale::RecodeData::GEORGIAN_ACADEMY(3)
Conversion routines for GEORGIAN-ACADEMY
Locale::RecodeData::GEORGIAN_PS(3)
Conversion routines for GEORGIAN-PS
Locale::RecodeData::GOST_19768_74(3)
Conversion routines for GOST_19768_74
Locale::RecodeData::GREEK7(3)
Conversion routines for GREEK7
Locale::RecodeData::GREEK7_OLD(3)
Conversion routines for GREEK7_OLD
Locale::RecodeData::GREEK_CCITT(3)
Conversion routines for GREEK_CCITT
Locale::RecodeData::HP_ROMAN8(3)
Conversion routines for HP_ROMAN8
Locale::RecodeData::IBM037(3)
Conversion routines for IBM037
Locale::RecodeData::IBM038(3)
Conversion routines for IBM038
Locale::RecodeData::IBM1004(3)
Conversion routines for IBM1004
Locale::RecodeData::IBM1026(3)
Conversion routines for IBM1026
Locale::RecodeData::IBM1047(3)
Conversion routines for IBM1047
Locale::RecodeData::IBM256(3)
Conversion routines for IBM256
Locale::RecodeData::IBM273(3)
Conversion routines for IBM273
Locale::RecodeData::IBM274(3)
Conversion routines for IBM274
Locale::RecodeData::IBM275(3)
Conversion routines for IBM275
Locale::RecodeData::IBM277(3)
Conversion routines for IBM277
Locale::RecodeData::IBM278(3)
Conversion routines for IBM278
Locale::RecodeData::IBM280(3)
Conversion routines for IBM280
Locale::RecodeData::IBM281(3)
Conversion routines for IBM281
Locale::RecodeData::IBM284(3)
Conversion routines for IBM284
Locale::RecodeData::IBM285(3)
Conversion routines for IBM285
Locale::RecodeData::IBM290(3)
Conversion routines for IBM290
Locale::RecodeData::IBM297(3)
Conversion routines for IBM297
Locale::RecodeData::IBM420(3)
Conversion routines for IBM420
Locale::RecodeData::IBM423(3)
Conversion routines for IBM423
Locale::RecodeData::IBM424(3)
Conversion routines for IBM424
Locale::RecodeData::IBM437(3)
Conversion routines for IBM437
Locale::RecodeData::IBM500(3)
Conversion routines for IBM500
Locale::RecodeData::IBM850(3)
Conversion routines for IBM850
Locale::RecodeData::IBM851(3)
Conversion routines for IBM851
Locale::RecodeData::IBM852(3)
Conversion routines for IBM852
Locale::RecodeData::IBM855(3)
Conversion routines for IBM855
Locale::RecodeData::IBM857(3)
Conversion routines for IBM857
Locale::RecodeData::IBM860(3)
Conversion routines for IBM860
Locale::RecodeData::IBM861(3)
Conversion routines for IBM861
Locale::RecodeData::IBM862(3)
Conversion routines for IBM862
Locale::RecodeData::IBM863(3)
Conversion routines for IBM863
Locale::RecodeData::IBM864(3)
Conversion routines for IBM864
Locale::RecodeData::IBM865(3)
Conversion routines for IBM865
Locale::RecodeData::IBM866(3)
Conversion routines for IBM866
Locale::RecodeData::IBM868(3)
Conversion routines for IBM868
Locale::RecodeData::IBM869(3)
Conversion routines for IBM869
Locale::RecodeData::IBM870(3)
Conversion routines for IBM870
Locale::RecodeData::IBM871(3)
Conversion routines for IBM871
Locale::RecodeData::IBM874(3)
Conversion routines for IBM874
Locale::RecodeData::IBM875(3)
Conversion routines for IBM875
Locale::RecodeData::IBM880(3)
Conversion routines for IBM880
Locale::RecodeData::IBM891(3)
Conversion routines for IBM891
Locale::RecodeData::IBM903(3)
Conversion routines for IBM903
Locale::RecodeData::IBM904(3)
Conversion routines for IBM904
Locale::RecodeData::IBM905(3)
Conversion routines for IBM905
Locale::RecodeData::IBM918(3)
Conversion routines for IBM918
Locale::RecodeData::IEC_P27_1(3)
Conversion routines for IEC_P27_1
Locale::RecodeData::INIS(3)
Conversion routines for INIS
Locale::RecodeData::INIS_8(3)
Conversion routines for INIS_8
Locale::RecodeData::INIS_CYRILLIC(3)
Conversion routines for INIS_CYRILLIC
Locale::RecodeData::ISO_10367_BOX(3)
Conversion routines for ISO_10367_BOX
Locale::RecodeData::ISO_2033_1983(3)
Conversion routines for ISO_2033_1983
Locale::RecodeData::ISO_5427(3)
Conversion routines for ISO_5427
Locale::RecodeData::ISO_5427_EXT(3)
Conversion routines for ISO_5427_EXT
Locale::RecodeData::ISO_5428(3)
Conversion routines for ISO_5428
Locale::RecodeData::ISO_8859_1(3)
Conversion routines for ISO-8859-1
Locale::RecodeData::ISO_8859_10(3)
Conversion routines for ISO-8859-10
Locale::RecodeData::ISO_8859_11(3)
Conversion routines for ISO-8859-11
Locale::RecodeData::ISO_8859_13(3)
Conversion routines for ISO-8859-13
Locale::RecodeData::ISO_8859_14(3)
Conversion routines for ISO-8859-14
Locale::RecodeData::ISO_8859_15(3)
Conversion routines for ISO-8859-15
Locale::RecodeData::ISO_8859_16(3)
Conversion routines for ISO-8859-16
Locale::RecodeData::ISO_8859_2(3)
Conversion routines for ISO-8859-2
Locale::RecodeData::ISO_8859_3(3)
Conversion routines for ISO-8859-3
Locale::RecodeData::ISO_8859_4(3)
Conversion routines for ISO-8859-4
Locale::RecodeData::ISO_8859_5(3)
Conversion routines for ISO-8859-5
Locale::RecodeData::ISO_8859_6(3)
Conversion routines for ISO-8859-6
Locale::RecodeData::ISO_8859_7(3)
Conversion routines for ISO-8859-7
Locale::RecodeData::ISO_8859_8(3)
Conversion routines for ISO-8859-8
Locale::RecodeData::ISO_8859_9(3)
Conversion routines for ISO-8859-9
Locale::RecodeData::KOI8_R(3)
Conversion routines for KOI8-R
Locale::RecodeData::KOI8_RU(3)
Conversion routines for KOI8-RU
Locale::RecodeData::KOI8_T(3)
Conversion routines for KOI8-T
Locale::RecodeData::KOI8_U(3)
Conversion routines for KOI8-U
Locale::RecodeData::KOI_8(3)
Conversion routines for KOI-8
Locale::RecodeData::LATIN_GREEK(3)
Conversion routines for LATIN_GREEK
Locale::RecodeData::LATIN_GREEK_1(3)
Conversion routines for LATIN_GREEK_1
Locale::RecodeData::MACARABIC(3)
Conversion routines for MACARABIC
Locale::RecodeData::MACCROATIAN(3)
Conversion routines for MACCROATIAN
Locale::RecodeData::MACCYRILLIC(3)
Conversion routines for MACCYRILLIC
Locale::RecodeData::MACGREEK(3)
Conversion routines for MACGREEK
Locale::RecodeData::MACHEBREW(3)
Conversion routines for MACHEBREW
Locale::RecodeData::MACICELAND(3)
Conversion routines for MACICELAND
Locale::RecodeData::MACINTOSH(3)
Conversion routines for MACINTOSH
Locale::RecodeData::MACROMANIA(3)
Conversion routines for MACROMANIA
Locale::RecodeData::MACTHAI(3)
Conversion routines for MACTHAI
Locale::RecodeData::MACTURKISH(3)
Conversion routines for MACTURKISH
Locale::RecodeData::MACUKRAINE(3)
Conversion routines for MACUKRAINE
Locale::RecodeData::MAC_IS(3)
Conversion routines for MAC-IS
Locale::RecodeData::MAC_SAMI(3)
Conversion routines for MAC-SAMI
Locale::RecodeData::MAC_UK(3)
Conversion routines for MAC-UK
Locale::RecodeData::NATS_DANO(3)
Conversion routines for NATS_DANO
Locale::RecodeData::NATS_SEFI(3)
Conversion routines for NATS_SEFI
Locale::RecodeData::NEXTSTEP(3)
Conversion routines for NEXTSTEP
Locale::RecodeData::SAMI_WS2(3)
Conversion routines for SAMI_WS2
Locale::RecodeData::TIS_620(3)
Conversion routines for TIS-620
Locale::RecodeData::US_ASCII(3)
Conversion routines for US-ASCII
Locale::RecodeData::UTF_8(3)
Conversion routines for UTF-8
Locale::RecodeData::VISCII(3)
Conversion routines for VISCII
Log::Agent::Priorities(3)
conversion between syslog priorities and levels
Log::Syslog::Fast::PP(3)
XS-free, API-compatible version of Log::Syslog::Fast
MIME::Base64::URLSafe(3)
Perl version of Python's URL-safe base64 codec
MPI_Get_library_version(3)
Returns a string of the current Open MPI version
MPI_Get_version(3)
Returns the version of the standard corresponding to the current implementation
MPI_Win_test(3)
Attempts to complete an RMA exposure epoch; a nonblocking version of MPI_Win_wait
Mail::AuthenticationResults::Header::Version(3)
Class modelling the AuthServID part of the Authentication Results Header
Mail::Message::Convert(3)
conversions between message types
Mail::SpamAssassin::Plugin::ReplaceTags(3)
tags for SpamAssassin rules The plugin allows rules to contain regular expression tags to be used in regular expression rules. The tags make it much easier to maintain complicated rules. Warning: This plugin relies on data structures specific to this version of SpamAssassin; it is not guaranteed to work with other versions of SpamAssassin
Marpa::PP(3)
Pure Perl version of Marpa
Marpa::XS(3)
XS version of Marpa
Math::Prime::Util::PP(3)
Pure Perl version of Math::Prime::Util
Math::Prime::Util::ZetaBigFloat(3)
Perl Big Float versions of Riemann Zeta and R functions
Math::Units(3)
Unit conversion
Memcached::libmemcached::memcached_version(3), memcached_lib_version(3), memcached_version(3)
Get library version
ModPerl::VersionUtil(3)
Makes it easier to investigate your mod_perl version
Module::CPANTS::Kwalitee::Version(3)
check versions
Module::CheckVersion(3)
Check module (e.g. check latest version) with CPAN (or equivalent repo)
Module::CheckVersion::cpan(3)
Handler for cpan
Module::CoreList(3)
what modules shipped with versions of perl
Module::CoreList::Utils(3)
what utilities shipped with versions of perl
Module::Dependency::Grapher(3)
creates visual dependency charts and accessible text versions
Module::Release::SVN(3)
Use Subversion with Module::Release
Module::Version(3)
Get module versions
Module::Version::App(3)
Application implementation for Module::Version
Module::Versions(3)
Handle versions of loaded modules with flexible result interface
Module::Versions::Report(3)
-- report versions of all modules in memory
MogileFS::FID(3)
represents a unique, immutable version of a file
MojoMojo::Declaw(3)
Cleans HTML as well as CSS of scripting and other executable contents, and neutralises XSS attacks. Derived from HTML::Defang version 1.01
MojoMojo::Schema::Result::Content(3)
Versioned page content
MojoMojo::Schema::Result::PageVersion(3)
Versioned page metadata
Mojolicious::Command::version(3)
Version command
MooseX::App::Plugin::Version(3)
Adds a command to display the version and license of your application
Net::Amazon::S3::Operation::Objects::List::Request(3)
An internal class to list a bucket (List Objects Version 1)
Net::Amazon::S3::Operation::Objects::List::Response(3)
An internal class to list a bucket (List Objects Version 1)
Net::Amazon::S3::Request::Role::Query::Param::Version_id(3)
version_id query param role
Net::Amazon::S3::Signature::V4Implementation(3)
Implements the Amazon Web Services signature version 4, AWS4-HMAC-SHA256 (copy of Net::Amazon::Signature::V4)
Net::Amazon::Signature::V4(3)
Implements the Amazon Web Services signature version 4, AWS4-HMAC-SHA256
Net::BGP(3)
Border Gateway Protocol version 4 speaker/listener library
Net::BitTorrent::Version(3)
Net::BitTorrent's project-wide version numbers
Net::GPSD3(3)
Interface to the gpsd server daemon protocol versions 3 (JSON)
Net::GPSD3::Return::VERSION(3)
Net::GPSD3 Return VERSION Object
Net::OpenVPN::Manage(3)
Manage an OpenVPN process via it's management port Version 0.02
Net::Packet::CDP::TypeSoftwareVersion(3)
Cisco Discovery Protocol Software Version extension header
Net::RawIP(3)
Perl extension to manipulate raw IP packets with interface to libpcap This is the documentation of "Net::RawIP" version 0.25
Net::STOMP::Client::Version(3)
Version support for Net::STOMP::Client
Net::SinFP::DB::IpVersion(3)
IpVersion database table
Net::SinFP::DB::OsVersion(3)
OsVersion database table
Net::SinFP::DB::OsVersionChildren(3)
OsVersionChildren database table
Net::SinFP::DB::OsVersionFamily(3)
OsVersionFamily database table
Net::XMPP2::Ext::Version(3)
Software version
NetApp::Filer::Version(3)
-- OO Class for representing NetApp Filer versions
Nginx::ReadBody(3)
nginx web server embeded perl module to read and evaluate a request body Version 0.07
Ocsinventory::Agent::Modules::Databases::Oracle::Instances(3), Oracle::Instances(3)
Lib for Oracle instances and versions retrieval
OpenXPKI::VERSION(3), Header "Name" OpenXPKI::VERSION(3)
version number of OpenXPKI core modules
PDF::API3(3)
Next version after PDF::API2
PDL::pdl2(3), pdl2(3)
Simple shell (version 2) for PDL
PPI::Find(3)
Object version of the Element->find method
PPI::Token::Number::Version(3)
Token class for a byte-packed number
Parse::YYLex(3), "Parse::YYLex"(3)
Version of Parse::Lex to be used by a byacc parser
Paws::EC2::CancelConversionTask(3)
Arguments for method CancelConversionTask on Paws::EC2
Paws::EC2::DescribeConversionTasks(3)
Arguments for method DescribeConversionTasks on Paws::EC2
Paws::ElastiCache::DescribeCacheEngineVersions(3)
Arguments for method DescribeCacheEngineVersions on Paws::ElastiCache
Paws::ElasticBeanstalk::CreateApplicationVersion(3)
Arguments for method CreateApplicationVersion on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::DeleteApplicationVersion(3)
Arguments for method DeleteApplicationVersion on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::DescribeApplicationVersions(3)
Arguments for method DescribeApplicationVersions on Paws::ElasticBeanstalk
Paws::ElasticBeanstalk::UpdateApplicationVersion(3)
Arguments for method UpdateApplicationVersion on Paws::ElasticBeanstalk
Paws::IAM::CreatePolicyVersion(3)
Arguments for method CreatePolicyVersion on Paws::IAM
Paws::IAM::DeletePolicyVersion(3)
Arguments for method DeletePolicyVersion on Paws::IAM
Paws::IAM::GetPolicyVersion(3)
Arguments for method GetPolicyVersion on Paws::IAM
Paws::IAM::ListPolicyVersions(3)
Arguments for method ListPolicyVersions on Paws::IAM
Paws::IAM::SetDefaultPolicyVersion(3)
Arguments for method SetDefaultPolicyVersion on Paws::IAM
Paws::OpsWorks::DescribeAgentVersions(3)
Arguments for method DescribeAgentVersions on Paws::OpsWorks
Paws::RDS::DescribeDBEngineVersions(3)
Arguments for method DescribeDBEngineVersions on Paws::RDS
Paws::RedShift::DescribeClusterVersions(3)
Arguments for method DescribeClusterVersions on Paws::RedShift
Paws::S3::GetBucketVersioningOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Paws::S3::ListObjectVersionsOutput(3), Paws::S3::(3)
Arguments for method on Paws::S3
Perl6::Builtins(3)
Provide Perl 5 versions of the new Perl 6 builtins
Perl::Critic::Policy::Compatibility::Gtk2Constants(3)
new enough Gtk2 version for its constants
Perl::Critic::Policy::Compatibility::PerlMinimumVersionAndWhy(3)
explicit Perl version for features used
Perl::Critic::Policy::Compatibility::PodMinimumVersion(3)
check Perl version declared against POD features used
Perl::Critic::Policy::Modules::PerlMinimumVersion(3)
Enforce backward compatible code
Perl::Critic::Policy::Modules::ProhibitUseQuotedVersion(3)
avoid quoted version number string in a "use" statement
Perl::Critic::Policy::Modules::RequirePerlVersion(3)
Require a "use 5.006;" or similar
Perl::Critic::Policy::Modules::RequireVersionVar(3)
Give every module a "$VERSION" number
Perl::Critic::Policy::ValuesAndExpressions::ProhibitComplexVersion(3)
Prohibit version values from outside the module
Perl::Critic::Policy::ValuesAndExpressions::ProhibitVersionStrings(3)
Don't use strings like "v1.4" or "1.4.5" when including other modules
Perl::Critic::Policy::ValuesAndExpressions::RequireConstantVersion(3)
Require $VERSION to be a constant rather than a computed value
Perl::Critic::Policy::ValuesAndExpressions::RequireNumericVersion(3)
$VERSION a plain number
Perl::Critic::Utils::DataConversion(3)
Utilities for converting from one type of data to another
Perl::MinimumVersion(3)
Find a minimum required version of perl for Perl code
Perl::PrereqScanner::Lite::Scanner::Version(3)
Extra Perl::PrereqScanner::Lite Scanner for VERSION method
Perl::Version(3)
Parse and manipulate Perl version strings
Plack::Middleware::Debug::Dancer::Version(3)
Show Dancer's version
Plack::Middleware::Debug::ModuleVersions(3)
Debug panel to inspect versions of loaded modules
Pod::MinimumVersion(3)
Perl version for POD directives used
Pod::MinimumVersion::Parser(3)
parser used by Pod::MinimumVersion
Pod::MinimumVersion::Report(3)
report object from Pod::MinimumVersion
Pod::ParseUtils(3)
helpers for POD parsing and conversion
Pod::Readme::Plugin::version(3)
Include version in README
Proc::ProcessTable::ncps(3)
New Colorized(optional) PS, a enhanced version of PS with advanced searching capabilities
Pushmi(3)
Subversion repository replication tool
RTF::Control(3)
Application of RTF::Parser for document conversion
Ref::Util::PP(3)
pure-Perl version of Ref::Util
Rex::Commands::SCM(3)
Sourcecontrol for Subversion and Git
Rex::Commands::Tail(3)
Tail a file Version <= 1.0: All these functions will not be reported. All these functions are not idempotent
Rinci::Upgrading(3)
Upgrading from previous version of specification
SOAP::Deserializer(3)
the means by which the toolkit manages the conversion of XML into an object manageable by a developer
SPOPS::Tool::UTFConvert(3)
-- Provide automatic UTF-8 conversion
SVK(3)
A Distributed Version Control System
SVK::Command::Add(3)
Put files and directories under version control
SVK::Command::Copy(3)
Make a versioned copy
SVK::Command::Delete(3)
Remove versioned item
SVK::Command::Mkdir(3)
Create a versioned directory
SVK::Version(3)
The SVK project-wide version number
SVN::ACL(3)
is a simple fronend to make the svnserve.conf, passwd, authz for Subversion.To use the mod_dav_svn, it requires the subversion 1.3.0 or later
SVN::Client(3)
Subversion client functions
SVN::Core(3)
Core module of the subversion perl bindings
SVN::Delta(3)
Subversion delta functions
SVN::Dump(3)
A Perl interface to Subversion dumps
SVN::Dump::Reader(3)
A Subversion dump reader
SVN::Dumpfile(3)
Perl extension to access and manipulate Subversion dumpfiles
SVN::Dumpfile::Node(3)
Represents a node in a subversion dumpfile
SVN::Dumpfile::Node::Content(3)
Represents the content of a node in a subversion dumpfile
SVN::Dumpfile::Node::Headers(3)
Represents the header of a node in a subversion dumpfile
SVN::Dumpfile::Node::Properties(3)
Represents the properties of a node in a Subversion dumpfile
SVN::Fs(3)
Subversion filesystem functions
SVN::Hook(3)
Managing subversion hooks
SVN::Hooks(3)
Framework for implementing Subversion hooks
SVN::Hooks::CheckJira(3)
Integrate Subversion with the JIRA ticketing system
SVN::Hooks::Generic(3)
Implement generic checks for all Subversion hooks
SVN::Hooks::Notify(3)
Subversion activity notification
SVN::Hooks::UpdateConfFile(3)
Maintain the repository configuration versioned
SVN::Log(3)
Extract change logs from a Subversion server
SVN::Mirror(3)
Mirror remote repository to local Subversion repository
SVN::Notify(3), Header "Name" SVN::Notify(3)
Subversion activity notification
SVN::Notify::Config(3)
Config-driven Subversion notification
SVN::Notify::Filter::AuthZMail(3)
Determines Subversion accounts to receive the email, via the AuthZSVNAccess file
SVN::Notify::Filter::Watchers(3)
Subscribe to SVN::Notify commits with a Subversion property
SVN::Notify::HTML(3), Header "Name" SVN::Notify::HTML(3)
Subversion activity HTML notification
SVN::Notify::HTML::ColorDiff(3), Header "Name" SVN::Notify::HTML::ColorDiff(3)
Subversion activity HTML notification with colorized diff
SVN::Notify::Snapshot(3)
Take snapshots from Subversion activity
SVN::Ra(3)
Subversion remote access functions
SVN::Repos(3)
Subversion repository functions
SVN::S4(3)
Wrapper for Subversion
SVN::S4::Config(3)
Get subversion config values
SVN::S4::Getopt(3)
Get Subversion command line options
SVN::Wc(3)
Subversion working copy functions
SVN::Web(3)
Subversion repository web frontend
SVN::Web::Browse(3)
SVN::Web action to browse a Subversion repository
Search::Xapian::DatabaseVersionError(3)
DatabaseVersionError indicates that a database is in an unsupported format
Security::TLSCheck::Checks::CipherStrength(3)
Check Strength of CipherSuites and SSL/TLS Version
Security::TLSCheck::Checks::CipherStrengthOnlyValidCerts(3)
Check Strength of CipherSuites and SSL/TLS Version, but only for domains with valid certficates
ShipIt::VC(3)
-- abstract base class for version control systems
ShipIt::VC::SVN(3)
-- ShipIt's subversion support
Software::License::AGPL_3(3)
GNU Affero General Public License, Version 3
Software::License::Apache_1_1(3)
The Apache Software License, Version 1.1
Software::License::Apache_2_0(3)
The Apache License, Version 2.0
Software::License::CC0_1_0(3)
the "public domain"-like CC0 license, version 1.0
Software::License::GPL_1(3)
GNU General Public License, Version 1
Software::License::GPL_2(3)
GNU General Public License, Version 2
Software::License::GPL_3(3)
GNU General Public License, Version 3
Software::License::LGPL_2_1(3)
GNU Lesser General Public License, Version 2.1
Software::License::LGPL_3_0(3)
GNU Lesser General Public License, Version 3
Software::License::Mozilla_2_0(3)
Mozilla Public License Version 2.0
Software::License::QPL_1_0(3)
The Q Public License, Version 1.0
Sort::Array(3)
This extended sorting algorithm allows you to a) sort an array by ANY field number, not only the first. b) find duplicates in your data-set and sort them out. The function is case-sensitive. Future versions might come without this limitation
Sort::Versions(3)
a perl 5 module for sorting of revision-like numbers
String::Divert(3)
String Object supporting Folding and Diversions
TAP::Parser::Result::Version(3)
TAP syntax version token
Template::Plugin::Gettext(3)
Gettext Support For the Template Toolkit Version 2
Term::Size(3)
Retrieve terminal size (Unix version)
Term::Size::Perl(3)
Perl extension for retrieving terminal size (Perl version)
Test2::API::Breakage(3)
What breaks at what version
Test2::Event::TAP::Version(3)
Event for TAP version
Test2::Require::Module(3)
Skip tests if certain packages are not installed, or insufficient versions
Test2::Require::Perl(3)
Skip the test unless the necessary version of Perl is installed
Test::Base::Less(3)
Limited version of Test::Base
Test::CPAN::Meta::Version(3)
Validate CPAN META data against the specification
Test::CPAN::Meta::YAML::Version(3)
Validate CPAN META data against the specification
Test::DiagINC(3)
List modules and versions loaded if tests fail
Test::HasVersion(3)
Check Perl modules have version numbers
Test::Requires::Git(3)
Check your test requirements against the available version of Git
Test::Version(3)
Check to see that version's in modules are sane
Text::HikiDoc(3)
Pure Perl implementation of 'HikiDoc' which is a text-to-HTML conversion tool
Text::Iconv(3)
Perl interface to iconv() codeset conversion function
Text::Roman(3)
Allows conversion between Roman and Arabic algarisms
Time::timegm(3), "Time::timegm"(3)
a UTC version of "mktime()"
Tk::Internals(3)
what is Perl Tk interface doing when you call Tk functions. This information is worse than useless for "perlTk" users, but can of some help for people interested in using modified Tk source with "perlTk". This document is under construction. The information is believed to be pertinent to the version of "portableTk" available when it was created. All the details are subject to change
Toader(3)
A CMS meant to be integrated with a versioning system
URI::UTF8::Punycode(3)
Punycode conversion of UTF-8 string
Unicode::MapUTF8(3)
Conversions to and from arbitrary character sets and UTF8
Unicode::UTF8simple(3)
Conversions to/from UTF8 from/to charactersets
VCP(3)
Versioned Copy, copying hierarchies of versioned files
VCP::Dest::revml(3)
Outputs versioned files to a revml file
VCS(3)
Version Control System access in Perl
VCS::CVS(3), "VCS::CVS"(3)
Provide a simple interface to CVS (the Concurrent Versions System)
VCS::File(3)
module for access to a file under version control
VCS::Lite(3)
Minimal version control system
VCS::Version(3)
module for access to a VCS version
VM::EC2::DB::Engine::Version(3)
An RDS Database Engine Version
VUser::Google::ProvisioningAPI::V1_0(3)
Perl module that implements version 1.0 of the Google Apps for Your Domain Provisioning API
VUser::Google::ProvisioningAPI::V2_0(3)
Perl module that implements version 2.0 of the Google Apps for Your Domain Provisioning API
Validator::Custom::Document::Version0(3)
Documentation in Version 0.xx
Version::Next(3)
increment module version numbers simply and correctly
WWW::MobileCarrierJP::DoCoMo::HTMLVersion(3)
HTMLVersion(DoCoMo)
WWW::Search::AltaVista::NL(3)
class for searching the dutch version of Alta Vista
WWW::Search::Null::NoVersion(3)
class for testing WWW::Search
WWW::WebArchive(3)
Retrieve old versions of public web pages from various web archives (i.e. www.archive.org, Internet Archive's Wayback Machine, or Google's page cache)
X11::Protocol(3)
Perl module for the X Window System Protocol, version 11
XML::DTDParser(3)
quick and dirty DTD parser Version 2.01
XML::Fast(3)
Simple and very fast XML - hash conversion
XML::SAX::Simple(3)
SAX version of XML::Simple
XMLTV::Version(3)
Adds a --version argument to XMLTV grabbers
ZMQ::FFI(3)
version agnostic Perl bindings for zeromq using ffi
ZMQ::FFI::Constants(3)
Generated module of zmq constants. All constants, all versions
_check-module-version(1)
Completer script for check-module-version
aliased(3)
Use shorter versions of class names
bk-export(1), bk export(1)
export a patch or version of a repository
bk-latest(1), bk latest(1)
run command using the latest version of bk
bk-upgrade(1), bk upgrade(1)
upgrade to, or check for, new versions of BitKeeper
bk-version(1), bk version(1)
print version
blib(3)
Use MakeMaker's uninstalled version of a package
bp_process_gadfly(1), bp_process_gadfly.pl(1)
Massage Gadfly/FlyBase GFF files into a version suitable for the Generic Genome Browser
bp_process_sgd(1), bp_process_sgd.pl(1)
Massage SGD annotation flat files into a version suitable for the Generic Genome Browser
brlcad-config(1)
script to get information about the installed version of BRL-CAD
calendar(3)
Local and universal time, day of the week, date and time conversions
cargo-version(1)
Show version information
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
check-module-version(1)
Check module (e.g. check latest version) with CPAN (or equivalent repo)
check_perldiag(1)
check a localized version of perldiag for consistency
check_postgres(1p), check_postgres.pl(1p)
a Postgres monitoring script for Nagios, MRTG, Cacti, and others This documents describes check_postgres.pl version 2.25.0
clipfilter(1)
Run various conversions for your clipboard data
dbfcstocs(1)
-- charset conversion of dbf files
dbupgrade(1)
a program to upgrade BRL-CAD mged geometry databases files to the current version
dbupgrade(nged)
Upgrade the currently open BRL-CAD mged geometry database to the current geometry database format version
encoding::warnings(3)
Warn on implicit encoding conversions
extcheck(1)
Detects version conflicts between a target Java Archive (JAR) file and currently installed extension JAR files
fish-completions(1)
Writing fish completions To specify a completion, use the complete command. complete takes as a parameter the name of the command to specify a completion for. For example, to add a completion for the program myprog, one would start the completion command with complete -c myprog ... To provide a list of possible completions for myprog, use the -a switch. If myprog accepts the arguments start and stop, this can be specified as complete -c myprog -a (aqstart stop(aq. The argument to the -a switch is always a single string. At completion time, it will be tokenized on spaces and tabs, and variable expansion, command substitution and other forms of parameter expansion will take place. fish has a special syntax to support specifying switches accepted by a command. The switches -s, -l and -o are used to specify a short switch (single character, such as -l), a gnu style long switch (such as --color) and an old-style long switch (like -shuffle), respectively. If the command (aqmyprog(aq has an option (aq-o(aq which can also be written as --output, and which can take an additional value of either (aqyes(aq or (aqno(aq, this can be specified by writing: 0.0 3.5 C complete -c myprog -s o -l output -a "yes no" P There are also special switches for specifying that a switch requires an argument, to disable filename completion, to create completions that are only available in some combinations, etc.. For a complete description of the various switches accepted by the complete command, see the documentation for the complete builtin, or write complete --help inside the fish shell. As a more comprehensive example, here(aqs a commented excerpt of the completions for systemd(aqs timedatectl: 0.0 3.5 C # All subcommands that timedatectl knows - this is useful for later. set -l commands status set-time set-timezone list-timezones set-local-rtc set-ntp # Disable file completions for the entire command # because it does not take files anywhere # Note that this can be undone by using "-F". # # File completions also need to be disabled # if you want to have more control over what files are offered # (e.g. just directories, or just files ending in ".mp3"). complete -c timedatectl -f # This line offers the subcommands # -"status", # -"set-timezone", # -"set-time" # -"list-timezones" # if no subcommand has been given so far. # # The (ga-n(ga/(ga--condition(ga option takes script as a string, which it executes. # If it returns true, the completion is offered. # Here the condition is the (ga__fish_seen_subcommands_from(ga helper function. # If returns true if any of the given commands is used on the commandline, # as determined by a simple heuristic. # For more complex uses, you can write your own function. # See e.g. the git completions for an example. # complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "status set-time set-timezone list-timezones" # If the "set-timezone" subcommand is used, # offer the output of (gatimedatectl list-timezones(ga as completions. # Each line of output is used as a separate candidate, # and anything after a tab is taken as the description. # It(aqs often useful to transform command output with (gastring(ga into that form. complete -c timedatectl -n "__fish_seen_subcommand_from set-timezone" e -a "(timedatectl list-timezones)" # Completion candidates can also be described via (ga-d(ga, # which is useful if the description is constant. # Try to keep these short, because that means the user gets to see more at once. complete -c timedatectl -n "not __fish_seen_subcommand_from $commands" e -a "set-local-rtc" -d "Maintain RTC in local time" # We can also limit options to certain subcommands by using conditions. complete -c timedatectl -n "__fish_seen_subcommand_from set-local-rtc" e -l adjust-system-clock -d (aqSynchronize system clock from the RTC(aq # These are simple options that can be used everywhere. complete -c timedatectl -s h -l help -d (aqPrint a short help text and exit(aq complete -c timedatectl -l version -d (aqPrint a short version string and exit(aq complete -c timedatectl -l no-pager -d (aqDo not pipe output into a pager(aq P For examples of how to write your own complex completions, study the completions in /usr/share/fish/completions. (The exact path depends on your chosen installation prefix and may be slightly different)
fish_svn_prompt(1)
output Subversion information for use in a prompt
fish_vcs_prompt(1)
output version control system information for use in a prompt
g-vrml(1)
Perform Boolean evaluations to produce a VRML version 2.0 file
g.version(1), g.version (1)
Displays GRASS GIS version info. Optionally also prints build or copyright information
jalv(1)
Run an LV2 plugin as a JACK application (console version)
jalv.gtk(1)
Run an LV2 plugin as a JACK application (Gtk version)
jalv.gtkmm(1)
Run an LV2 plugin as a JACK application (Gtkmm version)
jalv.qt(1)
Run an LV2 plugin as a JACK application (Qt version)
latexmlc(1), "latexmlc"(1)
An omni-executable for LaTeXML, capable of stand-alone, socket-server and web service conversion. Supports both core processing and post-processing
markdown(1)
text to html conversion tool
migrate_schema(1)
Utility to migrate a schema from one version to another
mojomojo_update_db.pl(1)
DBIC versioning
mversion(1)
Program for querying Perl module versions
npm-deprecate(1)
Deprecate a version of a package
npm-shrinkwrap(1)
Lock down dependency versions for publication
npm-version(1)
Bump a package version
pdfdetach(1)
Portable Document Format (PDF) document embedded file extractor (version 4.03)
pdffonts(1)
Portable Document Format (PDF) font analyzer (version 4.03)
pdfimages(1)
Portable Document Format (PDF) image extractor (version 4.03)
pdfinfo(1)
Portable Document Format (PDF) document information extractor (version 4.03)
pdftohtml(1)
Portable Document Format (PDF) to HTML converter (version 4.03)
pdftopng(1)
Portable Document Format (PDF) to Portable Network Graphics (PNG) converter (version 4.03)
pdftoppm(1)
Portable Document Format (PDF) to Portable Pixmap (PPM) converter (version 4.03)
pdftops(1)
Portable Document Format (PDF) to PostScript converter (version 4.03)
pdftotext(1)
Portable Document Format (PDF) to text converter (version 4.03)
pdl2(1)
Simple shell (version 2) for PDL
perl-reversion(1)
Manipulate project version numbers
perlaix(1)
Perl version 5 on IBM AIX (UNIX) systems
perlfreebsd(1)
Perl version 5 on FreeBSD systems
perlgpl(1)
the GNU General Public License, version 1
perlhaiku(1)
Perl version 5.10+ on Haiku
perlhpux(1)
Perl version 5 on Hewlett-Packard Unix (HP-UX) systems
perlhurd(1)
Perl version 5 on Hurd
perlirix(1)
Perl version 5 on Irix systems
perllinux(1)
Perl version 5 on Linux systems
perlopenbsd(1)
Perl version 5 on OpenBSD systems
perlos400(1)
Perl version 5 on OS/400 This document needs to be updated, but we don't know what it should say. Please submit comments to <https://github.com/Perl/perl5/issues>
perlqnx(1)
Perl version 5 on QNX
perlriscos(1)
Perl version 5 for RISC OS
perlsolaris(1)
Perl version 5 on Solaris systems
perlsymbian(1)
Perl version 5 on Symbian OS
perltru64(1)
Perl version 5 on Tru64 (formerly known as Digital UNIX formerly known as DEC OSF/1) systems
perluniprops(1)
Index of Unicode Version 13.0.0 character properties in Perl
perlver(1)
The Perl Minimum Version Analyzer
pod-minimumversion(1)
-- report minimum Perl version for given POD
pods::SDL::AudioCVT(3), SDL::AudioCVT(3)
-- Audio Conversion Structure
pods::SDL::Version(3), SDL::Version(3)
SDL Bindings for structure SDL_Version
pt-show-grants(1)
Canonicalize and print MySQL grants so you can effectively replicate, compare and version-control them
puny(1), URI::UTF8::Punycode(1)
Punycode conversion of UTF-8 string
rune(3), runetochar(3), chartorune(3), runelen(3), runenlen(3), fullrune(3), utfecpy(3), utflen(3), utfnlen(3), utfrune(3), utfrrune(3), utfutf(3)
rune/UTF conversion
s4(1)
Wrapper for subversion program
sccs-branch(1)
create a new branch and retrieve a version for editing
sccs-delget(1), sccs-deledit(1)
perform a delta and get new version
sccs-edit(1)
retrieves a version of a file for editing
sccs-get(1), get(1)
retrieve a version of an SCCS file
sccs-sccsdiff(1), sccsdiff(1)
compare two versions of an SCCS file
semver(7)
The semantic versioner for npm
serialver(1)
Returns the serial version UID for specified classes
spamd(1)
daemonized version of spamassassin
sqitch-upgrade(3), Header "Name" sqitch-upgrade(3)
Upgrade the registry to the current version
status(nged)
Without a subcommand, the status command returns the following information: current state, view size of the current display manager, the conversion factor from local model units to the base units (mm) stored in the database, and the view matrices of the current display manager
subatom(1)
produce an atom feed from subversion commits
superclass(3)
Like parent, but with version checks
svk(1)
A Distributed Version Control System
svm(1)
command line interface for remote Subversion repository mirroring
svnhook(1)
Managing subversion hooks
svnnotify(1), Header "Name" svnnotify(1)
Subversion activity notification
text2odf(1)
Text to OpenDocument conversion
text2table(1)
flat text conversion to OpenDocument spreadsheet
tickit_version(7), tickit_version_*(7)
libtickit version queries
true::VERSION(3)
shim to allow modules to depend on true.pm
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
units(1)
conversion program
vc(1)
version control
vcp(1)
Copy versions of files between repositories and/or RevML
venti-conn(3), VtConn(3), vtconn(3), vtdial(3), vtfreeconn(3), vtsend(3), vtrecv(3), vtversion(3), vtdebug(3), vthangup(3)
Venti network connections
version(3)
Perl extension for Version Objects
version(9p)
negotiate protocol version
version::Internals(3)
Perl extension for Version Objects
what(1)
extract SCCS version information from a file
xpdf(1)
Portable Document Format (PDF) file viewer (version 4.03)
xpdfrc(5)
configuration file for Xpdf tools (version 4.03)
home | help