Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
__iconv_get_list(3), __iconv_free_list(3)
retrieving a list of character encodings supported by iconv(3)
gss_inquire_names_for_mech(3)
List the name-types supported by the specified mechanism
iconvlist(3)
retrieving a list of character encodings supported by iconv(3)
libarchive-formats(5)
archive formats supported by the libarchive library
pcap-linktype(7)
link-layer header types supported by libpcap
pcap_list_datalinks(3), pcap_free_datalinks(3)
get a list of link-layer header types supported by a capture device, and free that list
pcap_list_tstamp_types(3), pcap_free_tstamp_types(3)
get a list of time stamp types supported by a capture device, and free that list
pmc_event_names_of_class(3)
return a list of event names supported by a PMC class
rpc_gss_get_versions(3)
Get supported protocol version
SSL_CTX_set1_curves(3), SSL_CTX_set1_curves_list(3), SSL_set1_curves(3), SSL_set1_curves_list(3), SSL_get1_curves(3), SSL_get_shared_curve(3), SSL_CTX_set_ecdh_auto(3), SSL_set_ecdh_auto(3)
EC supported curve functions
SSL_CTX_set1_groups(3), SSL_CTX_set1_groups_list(3), SSL_set1_groups(3), SSL_set1_groups_list(3), SSL_get1_groups(3), SSL_get_shared_group(3), SSL_CTX_set1_curves(3), SSL_CTX_set1_curves_list(3), SSL_set1_curves(3), SSL_set1_curves_list(3), SSL_get1_curves(3), SSL_get_shared_curve(3)
EC supported curve functions
SSL_CTX_set1_sigalgs(3), SSL_set1_sigalgs(3), SSL_CTX_set1_sigalgs_list(3), SSL_set1_sigalgs_list(3), SSL_CTX_set1_client_sigalgs(3), SSL_set1_client_sigalgs(3), SSL_CTX_set1_client_sigalgs_list(3), SSL_set1_client_sigalgs_list(3)
set supported signature algorithms
SSL_CTX_set_min_proto_version(3), SSL_CTX_set_max_proto_version(3), SSL_CTX_get_min_proto_version(3), SSL_CTX_get_max_proto_version(3), SSL_set_min_proto_version(3), SSL_set_max_proto_version(3), SSL_get_min_proto_version(3), SSL_get_max_proto_version(3)
Get and set minimum and maximum supported protocol version
SSL_extension_supported(3), SSL_CTX_add_custom_ext(3), SSL_CTX_add_client_custom_ext(3), SSL_CTX_add_server_custom_ext(3), custom_ext_add_cb(3), custom_ext_free_cb(3), custom_ext_parse_cb(3)
custom TLS extension handling
SSL_get1_supported_ciphers(3), SSL_get_client_ciphers(3), SSL_get_ciphers(3), SSL_CTX_get_ciphers(3), SSL_bytes_to_cipher_list(3), SSL_get_cipher_list(3), SSL_get_shared_ciphers(3)
get list of available SSL_CIPHERs
SSL_get_shared_sigalgs(3), SSL_get_sigalgs(3)
get supported signature algorithms
ASYNC_WAIT_CTX_new(3ossl), ASYNC_WAIT_CTX_free(3ossl), ASYNC_WAIT_CTX_set_wait_fd(3ossl), ASYNC_WAIT_CTX_get_fd(3ossl), ASYNC_WAIT_CTX_get_all_fds(3ossl), ASYNC_WAIT_CTX_get_changed_fds(3ossl), ASYNC_WAIT_CTX_clear_fd(3ossl), ASYNC_WAIT_CTX_set_callback(3ossl), ASYNC_WAIT_CTX_get_callback(3ossl), ASYNC_WAIT_CTX_set_status(3ossl), ASYNC_WAIT_CTX_get_status(3ossl), ASYNC_callback_fn(3ossl), ASYNC_STATUS_UNSUPPORTED(3ossl), ASYNC_STATUS_ERR(3ossl), ASYNC_STATUS_OK(3ossl), ASYNC_STATUS_EAGAIN(3ossl)
functions to manage waiting for asynchronous jobs to complete
MPIX_GPU_query_support(3)
Returns the type of GPU supported
SDL_VideoModeOK(3)
Check to see if a particular video mode is supported
SSL_CTX_set1_groups(3), SSL_CTX_set1_groups_list(3), SSL_set1_groups(3), SSL_set1_groups_list(3), SSL_get1_groups(3), SSL_get_shared_group(3), SSL_CTX_set1_curves(3), SSL_CTX_set1_curves_list(3), SSL_set1_curves(3), SSL_set1_curves_list(3), SSL_get1_curves(3), SSL_get_shared_curve(3)
EC supported curve functions
SSL_CTX_set1_groups(3ossl), SSL_CTX_set1_groups_list(3ossl), SSL_set1_groups(3ossl), SSL_set1_groups_list(3ossl), SSL_get1_groups(3ossl), SSL_get_shared_group(3ossl), SSL_get_negotiated_group(3ossl), SSL_CTX_set1_curves(3ossl), SSL_CTX_set1_curves_list(3ossl), SSL_set1_curves(3ossl), SSL_set1_curves_list(3ossl), SSL_get1_curves(3ossl), SSL_get_shared_curve(3ossl)
EC supported curve functions
SSL_CTX_set1_sigalgs(3), SSL_set1_sigalgs(3), SSL_CTX_set1_sigalgs_list(3), SSL_set1_sigalgs_list(3), SSL_CTX_set1_client_sigalgs(3), SSL_set1_client_sigalgs(3), SSL_CTX_set1_client_sigalgs_list(3), SSL_set1_client_sigalgs_list(3)
set supported signature algorithms
SSL_CTX_set1_sigalgs(3ossl), SSL_set1_sigalgs(3ossl), SSL_CTX_set1_sigalgs_list(3ossl), SSL_set1_sigalgs_list(3ossl), SSL_CTX_set1_client_sigalgs(3ossl), SSL_set1_client_sigalgs(3ossl), SSL_CTX_set1_client_sigalgs_list(3ossl), SSL_set1_client_sigalgs_list(3ossl)
set supported signature algorithms
SSL_CTX_set_min_proto_version(3), SSL_CTX_set_max_proto_version(3), SSL_CTX_get_min_proto_version(3), SSL_CTX_get_max_proto_version(3), SSL_set_min_proto_version(3), SSL_set_max_proto_version(3), SSL_get_min_proto_version(3), SSL_get_max_proto_version(3)
Get and set minimum and maximum supported protocol version
SSL_CTX_set_min_proto_version(3ossl), SSL_CTX_set_max_proto_version(3ossl), SSL_CTX_get_min_proto_version(3ossl), SSL_CTX_get_max_proto_version(3ossl), SSL_set_min_proto_version(3ossl), SSL_set_max_proto_version(3ossl), SSL_get_min_proto_version(3ossl), SSL_get_max_proto_version(3ossl)
Get and set minimum and maximum supported protocol version
SSL_extension_supported(3), SSL_CTX_add_custom_ext(3), SSL_CTX_add_client_custom_ext(3), SSL_CTX_add_server_custom_ext(3), custom_ext_add_cb(3), custom_ext_free_cb(3), custom_ext_parse_cb(3)
custom TLS extension handling
SSL_extension_supported(3ossl), SSL_custom_ext_add_cb_ex(3ossl), SSL_custom_ext_free_cb_ex(3ossl), SSL_custom_ext_parse_cb_ex(3ossl), SSL_CTX_add_custom_ext(3ossl), SSL_CTX_add_client_custom_ext(3ossl), SSL_CTX_add_server_custom_ext(3ossl), custom_ext_add_cb(3ossl), custom_ext_free_cb(3ossl), custom_ext_parse_cb(3ossl)
custom TLS extension handling
SSL_get1_supported_ciphers(3), SSL_get_client_ciphers(3), SSL_get_ciphers(3), SSL_CTX_get_ciphers(3), SSL_bytes_to_cipher_list(3), SSL_get_cipher_list(3), SSL_get_shared_ciphers(3)
get list of available SSL_CIPHERs
SSL_get1_supported_ciphers(3ossl), SSL_get_client_ciphers(3ossl), SSL_get_ciphers(3ossl), SSL_CTX_get_ciphers(3ossl), SSL_bytes_to_cipher_list(3ossl), SSL_get_cipher_list(3ossl), SSL_get_shared_ciphers(3ossl)
get list of available SSL_CIPHERs
SSL_get_shared_sigalgs(3), SSL_get_sigalgs(3)
get supported signature algorithms
SSL_get_shared_sigalgs(3ossl), SSL_get_sigalgs(3ossl)
get supported signature algorithms
SupportedHints(1x)
Afterstep SupportedHints
XDeviceBell(3)
ring a bell on a device supported through the input extension
XcupQueryVersion(3)
Returns TOG-CUP protocol version supported by the X server
XdbeQueryExtension(3)
returns the version of DBE supported by the server
XvListImageFormats(3)
return list of image formats supported by a video port
aa_dithernames(3)
Names of dithering methods supported by AA-lib
aa_formats(3)
NULL terminated array of save formats supported by AA-lib
aa_mousedrivers(3)
NULL terminated array of mouse drivers supported by AA-lib
aa_setsupported(3)
alter the "supported" field of hardware_params structure used by AA-lib
atril-thumbnailer(1)
create png thumbnails from atril supported documents
axfer(1)
command-line sound recorder and player for sound devices and nodes supported by Linux sound subsystem (Advanced Linux Sound Architecture, also known as ALSA)
centerim(1)
a text mode based IM client for Linux, *BSD, Sun Solaris, MacOS X and possibly, other Unices. ICQ2000, Yahoo!, AIM TOC, IRC, MSN, Gadu-Gadu and Jabber protocols are now supported. Internal LiveJournal client and RSS reader are also provided
coap_async(3), coap_async_is_supported(3), coap_register_async(3), coap_async_set_delay(3), coap_find_async(3), coap_free_async(3), coap_async_set_app_data(3), coap_async_get_app_data(3)
Work with CoAP async support
coap_tls_library(3), coap_dtls_is_supported(3), coap_tls_is_supported(3), coap_tcp_is_supported(3), coap_get_tls_library_version(3), coap_string_tls_support(3), coap_string_tls_version(3), coap_show_tls_version(3)
Work with CoAP TLS libraries
efi_variables_supported(3), efi_del_variable(3), efi_get_variable(3), efi_get_variable_attributes(3), efi_get_variable_size(3), efi_set_variable(3)
manipulate UEFI variables
fi_join_collective(3)
Operation where a subset of peers join a new collective group. fi_barrier Collective operation that does not complete until all peers have entered the barrier call. fi_broadcast A single sender transmits data to all peers, including itself. fi_alltoall Each peer distributes a slice of its local data to all peers. fi_allreduce Collective operation where all peers broadcast an atomic operation to all other peers. fi_allgather Each peer sends a complete copy of its local data to all peers. fi_reduce_scatter Collective call where data is collected from all peers and merged (reduced). The results of the reduction is distributed back to the peers, with each peer receiving a slice of the results. fi_reduce Collective call where data is collected from all peers to a root peer and merged (reduced). fi_scatter A single sender distributes (scatters) a slice of its local data to all peers. fi_gather All peers send their data to a root peer. fi_query_collective Returns information about which collective operations are supported by a provider, and limitations on the collective
filename.tcl85(n), filename(n)
File name conventions supported by Tcl commands
filename.tcl86(n), filename(n)
File name conventions supported by Tcl commands
filename.tcl87(n), filename(n)
File name conventions supported by Tcl commands
foot-ctlseqs(7)
terminal control sequences supported by foot
gammu-smsd-dbi(7)
gammu-smsd(1) backend using DBI abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin \$1
gammu-smsd-odbc(7)
gammu-smsd(1) backend using ODBC abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin \$1
gammu-smsd-sql(7)
gammu-smsd(1) backend using SQL abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin \$1
get_sound_input_cap_bits(3)
Checks which audio input sample formats are supported. Allegro game programming library
get_sound_input_cap_parm(3)
Detects if the specified recording parameters are supported. Allegro game programming library
glXQueryExtension(3), "glXQueryExtension(3)
indicate whether the GLX extension is supported
glXQueryExtensionsString(3), "glXQueryExtensionsString(3)
return list of supported extensions
glutExtensionSupported(3)
helps to easily determine whether a given OpenGL extension is supported
gnutls_url_is_supported(3)
API function
gutenfetch_set_active_server(3)
-- This function sets the default Gutenberg server used to satisfy requests. Instead of taking a gutenfetch_server_t * to set the server, it takes a NULL-terminated URL such as "ftp://ibiblio.org/pub/docs/books/gutenberg/". The url should contain a protocol supported by CURL a valid hostname and a directory to the base of the gutenberg texts
jose-alg(1)
Lists all supported algorithms
knet_get_crypto_list(3)
Get a list of supported crypto libraries
kripp(1)
is a network passwords sniffer. Its name is an acronym for "kripp is rest in peace, privacy". Supported protocols are icq, aim, pop3, ftp, http and cvs
ldns_key_set_algorithm(3), ldns_key_set_rsa_key(3), ldns_key_set_dsa_key(3), ldns_key_set_hmac_key(3), ldns_key_set_origttl(3), ldns_key_set_inception(3), ldns_key_set_expiration(3), ldns_key_set_pubkey_owner(3), ldns_key_set_keytag(3), ldns_key_set_flags(3), ldns_key_list_set_key_count(3), ldns_key_algo_supported(3)
set ldns_key attributes
libarchive-formats(5)
archive formats supported by the libarchive library
libssh2_session_supported_algs(3)
get list of supported algorithms
libssh2_userauth_list(3)
list supported authentication methods
load_bitmap(3)
Loads any supported bitmap from a file. Allegro game programming library
load_image(3), load_image (3)
synchronously load supported images
mdsum(1)
compute file digests using any supported algorithms
ocf_heartbeat_db2(7)
Resource Agent that manages an IBM DB2 LUW databases in Standard role as primitive or in HADR roles as master/slave configuration. Multiple partitions are supported
options.tk85(n), options(n)
Standard options supported by widgets
options.tk86(n), options(n)
Standard options supported by widgets
pcap-linktype(7)
link-layer header types supported by libpcap
pcap_list_datalinks(3), pcap_free_datalinks(3)
get a list of link-layer header types supported by a capture device, and free that list
pcap_list_tstamp_types(3), pcap_free_tstamp_types(3)
get a list of time stamp types supported by a capture device, and free that list
pfsindcraw(1)
Read an image in a camera RAW file format supported by DCRAW and write pfs stream to the standard output
plotfont(1)
produce character maps of fonts supported by the plotting utilities SB \$1 \$2
sane-gphoto2(5)
SANE backend for gphoto2 supported cameras
save_bitmap(3)
Saves a bitmap into any supported file format. Allegro game programming library
sg_opcodes(8)
report supported SCSI commands or task management functions
shishi_checksum_supported_p(3)
API function
shishi_cipher_supported_p(3)
API function
timew-dates(7)
date formats supported by Timewarrior
timew-durations(7)
duration formats supported by Timewarrior
timew-ranges(7)
date and time ranges supported by Timewarrior
tpm2_testparms(1), tpm2_testparms(1)(1)
Verify that specified algorithm suite is supported by TPM
ttk::widget.tk85(n), ttk::widget(n)
Standard options and commands supported by Tk themed widgets
ttk_widget.tk86(n), ttk::widget(n)
Standard options and commands supported by Tk themed widgets
unoconv(1)
convert any document from and to any LibreOffice supported format
vga_hasmode(3)
returns if a video mode is supported
xfs(5)
layout, mount options, and supported file attributes for the XFS filesystem
xine-list-1.2(1)
get supported filetype information from xine-lib
xreader-thumbnailer(1)
create png thumbnails from xreader supported documents
yasm_arch(7)
Yasm Supported Target Architectures
yasm_dbgfmts(7)
Yasm Supported Debugging Formats
yasm_objfmts(7)
Yasm Supported Object Formats
yasm_parsers(7)
Yasm Supported Parsers (Assembler Syntaxes)
zip_compression_method_supported(3)
return if a compression method is supported
zip_encryption_method_supported(3)
return if an encryption method is supported
zip_source_make_command_bitmap(3)
create bitmap of supported source operations
AnyEvent(3)
the DBI of event loop programming EV, Event, Glib, Tk, UV, Perl, Event::Lib, Irssi, rxvt-unicode, IO::Async, Qt, FLTK and POE are various supported event loops/environments
Authen::Htpasswd::Util(3)
performs encryption of supported .htpasswd formats
Date::Manip::Lang::index(3)
An index of languages supported by Date::Manip
Devel::CheckOS::Families(3)
what OS "families" are supported "out of the box" by Devel::CheckOS and Devel::AssertOS?
Encode::Supported(3)
-- Encodings supported by Encode
HTTP::Throwable::Role::Status::HTTPVersionNotSupported(3)
505 HTTP Version Not Supported
HTTP::Throwable::Role::Status::UnsupportedMediaType(3)
415 Unsupported Media Type
Locale::Codes::Types(3)
types of data sets supported
MP3::Tag::ID3v2-Data(3)
get_frame() data format and supported frames
MP3::Tag::ID3v2_Data(3)
get_frame() data format and supported frames
MR::SilverBox(3)
A backward-compatiblity module. Is it obsolete and is unsupported. Do not use
Net::CLI::Interact::Manual::Phrasebook(3)
List of Supported CLIs
Net::SSL::Handshake::Extensions::ECPointFormats(3)
client extension for TLS Handshake to show supported elliptic courves
Net::SSL::Handshake::Extensions::EllipticCurves(3)
client extension for TLS Handshake to show supported elliptic courves
PPIx::Regexp::Token::CharClass::POSIX::Unknown(3)
Represent an unknown or unsupported POSIX character class
Perlbal::Manual::Roles(3)
Roles supported by Perlbal
Protocol::XMPP::Element::Features(3), Protocol::XMPP::Features(3)
broker for setting up internal state and triggering reponses based on supported features
SPOPS::Key::DBI::Identity(3)
-- Retrieve IDENTITY values from a supported DBI database
SPOPS::Key::DBI::Sequence(3)
-- Retrieve sequence values from a supported DBI database
Search::Xapian::DatabaseVersionError(3)
DatabaseVersionError indicates that a database is in an unsupported format
Security::TLSCheck::Checks::MailCipherStrength(3)
Checks mailservers for supported CipherSuites
Sys::CPU(3)
Perl extension for getting CPU information. Currently only number of CPU's supported
Tk::options(3)
Standard options supported by widgets and their manipulation
Toader::Render(3)
This renders supported Toader objects
Toader::Render::supportedBackends(3)
This checks if the backend is supported or not
Toader::Render::supportedObjects(3)
This checks if a object is supported or not for rendering
XML::UM(3)
Convert UTF-8 strings to any encoding supported by XML::Encoding
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
csa_list_calendars(3)
list the calendars supported by a calendar service
jhat(1)
Analyzes the Java heap. This command is experimental and unsupported
jinfo(1)
Generates configuration information. This command is experimental and unsupported
jmap(1)
Prints shared object memory maps or heap memory details for a process, core file, or remote debug server. This command is experimental and unsupported
jps(1)
Lists the instrumented Java Virtual Machines (JVMs) on the target system. This command is experimental and unsupported
jrunscript(1)
Runs a command-line script shell that supports interactive and batch modes. This command is experimental and unsupported
jsadebugd(1)
Attaches to a Java process or core file and acts as a debug server. This command is experimental and unsupported
jstack(1)
Prints Java thread stack traces for a Java process, core file, or remote debug server. This command is experimental and unsupported
jstat(1)
Monitors Java Virtual Machine (JVM) statistics. This command is experimental and unsupported
jstatd(1)
Monitors Java Virtual Machines (JVMs) and enables remote monitoring tools to attach to JVMs. This command is experimental and unsupported
mutagen-inspect(1)
view Mutagen-supported audio tags rst2man-indent-level 0 1 rstReportMargin \$1
native2ascii(1)
Creates localizable applications by converting a file with characters in any supported character encoding to one with ASCII and/or Unicode escapes or vice versa
nirt_formatting(5)
DRAFT!!! Document supported output formatting specifications for Natalies Interactive RayTracer (NIRT)
r.external(1), r.external (1)
Links GDAL supported raster data as a pseudo GRASS raster map
r.out.gdal(1), r.out.gdal (1)
Exports GRASS raster maps into GDAL supported formats
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
v.external(1), v.external (1)
Creates a new pseudo-vector map as a link to an OGR-supported layer or a PostGIS feature table
v.out.ogr(1), v.out.ogr (1)
Exports a vector map layer to any of the supported OGR vector formats. By default a vector map layer is exported to OGC GeoPackage format
home | help