Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
bsde_get_rule_count(3), bsde_get_rule_slots(3)
file system firewall statistics
ctlstat(8)
CAM Target Layer statistics utility
devstat(3), devstat_getnumdevs(3), devstat_getgeneration(3), devstat_getversion(3), devstat_checkversion(3), devstat_getdevs(3), devstat_selectdevs(3), devstat_buildmatch(3), devstat_compute_statistics(3), devstat_compute_etime(3)
device statistics utility library
devstat(9), devstat_end_transaction(9), devstat_end_transaction_bio(9), devstat_end_transaction_bio_bt(9), devstat_new_entry(9), devstat_remove_entry(9), devstat_start_transaction(9), devstat_start_transaction_bio(9)
kernel interface for keeping device statistics
du(1)
display disk usage statistics
gstat(8)
print statistics about GEOM disks
ifmcstat(8)
dump multicast group management statistics per interface
iostat(8)
report I/O statistics
ipfstat(8)
reports on packet filter statistics and filter list
kvm_getcptime(3)
fetch global CPU time statistics
kvm_getswapinfo(3)
return swap summary statistics for the system
libmemstat(3)
library interface to retrieve kernel memory allocator statistics
lockstat(1)
report kernel lock and profiling statistics
mailstats(8)
display mail statistics
ministat(1)
statistics utility
netstat(1)
show network status and statistics
nfsstat(1)
display NFS statistics
pcap_stats(3)
get capture statistics
plockstat(1)
Trace pthread lock statistics using DTrace
pmap_resident_count(9), pmap_wired_count(9)
return page resident and wiring statistics
pmc_get_driver_stats(3)
retrieve driver statistics
rpc.rstatd(8)
kernel statistics server
sa(8)
print system accounting statistics
statfs(2)
get file system statistics
stats(3)
statistics gathering
stats(7)
information about various and sundry statistics utilities
systat(1)
display system statistics
vmstat(8)
report virtual memory statistics
zpool-iostat(8)
display logical I/O statistics for ZFS storage pools
zpool_influxdb(8)
collect ZFS pool statistics in InfluxDB line protocol format
OPENSSL_LH_stats(3), OPENSSL_LH_node_stats(3), OPENSSL_LH_node_usage_stats(3), OPENSSL_LH_stats_bio(3), OPENSSL_LH_node_stats_bio(3), OPENSSL_LH_node_usage_stats_bio(3)
LHASH statistics
SSL_CTX_sess_number(3), SSL_CTX_sess_connect(3), SSL_CTX_sess_connect_good(3), SSL_CTX_sess_connect_renegotiate(3), SSL_CTX_sess_accept(3), SSL_CTX_sess_accept_good(3), SSL_CTX_sess_accept_renegotiate(3), SSL_CTX_sess_hits(3), SSL_CTX_sess_cb_hits(3), SSL_CTX_sess_misses(3), SSL_CTX_sess_timeouts(3), SSL_CTX_sess_cache_full(3)
obtain session cache statistics
ALTER_STATISTICS(7)
change the definition of an extended statistics object
ANALYZE(7)
collect statistics about a database
CREATE_STATISTICS(7)
define extended statistics
DROP_STATISTICS(7)
remove extended statistics
Gc(3o)
Memory management control and statistics; finalised values
OPENSSL_LH_stats(3), OPENSSL_LH_node_stats(3), OPENSSL_LH_node_usage_stats(3), OPENSSL_LH_stats_bio(3), OPENSSL_LH_node_stats_bio(3), OPENSSL_LH_node_usage_stats_bio(3)
LHASH statistics
OPENSSL_LH_stats(3ossl), OPENSSL_LH_node_stats(3ossl), OPENSSL_LH_node_usage_stats(3ossl), OPENSSL_LH_stats_bio(3ossl), OPENSSL_LH_node_stats_bio(3ossl), OPENSSL_LH_node_usage_stats_bio(3ossl)
LHASH statistics
SSL_CTX_sess_number(3), SSL_CTX_sess_connect(3), SSL_CTX_sess_connect_good(3), SSL_CTX_sess_connect_renegotiate(3), SSL_CTX_sess_accept(3), SSL_CTX_sess_accept_good(3), SSL_CTX_sess_accept_renegotiate(3), SSL_CTX_sess_hits(3), SSL_CTX_sess_cb_hits(3), SSL_CTX_sess_misses(3), SSL_CTX_sess_timeouts(3), SSL_CTX_sess_cache_full(3)
obtain session cache statistics
SSL_CTX_sess_number(3ossl), SSL_CTX_sess_connect(3ossl), SSL_CTX_sess_connect_good(3ossl), SSL_CTX_sess_connect_renegotiate(3ossl), SSL_CTX_sess_accept(3ossl), SSL_CTX_sess_accept_good(3ossl), SSL_CTX_sess_accept_renegotiate(3ossl), SSL_CTX_sess_hits(3ossl), SSL_CTX_sess_cb_hits(3ossl), SSL_CTX_sess_misses(3ossl), SSL_CTX_sess_timeouts(3ossl), SSL_CTX_sess_cache_full(3ossl)
obtain session cache statistics
affstats(1)
print specific statistics about one or more AFF files
afpstats(1)
List AFP statistics
amreport(8)
generate a formatted output of statistics for an Amanda run
apachetop(1)
display real-time web server statistics
arbtt-stats(1)
generate statistics from the arbtt data samples
arcstat(1)
report ZFS ARC and L2ARC statistics
aststatistics(1), Statistics(1)
calculate statistics of a dataset
besside-ng(8)
crack a WEP or WPA key without user intervention and collaborate with WPA cracking statistics
calamaris(1)
generate text and graphical statistics out of log files from Proxy-Cache-Servers
cas(1)
c aMule statistics
cmstat(1)
summary statistics for a covariance model file
collectd(1)
System statistics collection daemon
collectd.conf(5)
Configuration for the system statistics collection daemon collectd
darkstat(8)
network statistics gatherer
devstat(8)
display device statistics
dfeedinfo(8)
Display and manipulate the realtime feed statistics
dnsjit(1)
DNS engine based around LuaJIT for capturing, parsing, replaying and statistics gathering
dsc(1)
DNS Statistics Collector
dsc.conf(5)
Configuration for the DNS Statistics Collector
dspam_stats(1)
display spam statistics
explain_fstatfs_or_die(3)
get file system statistics and report errors require_index { "get file system statistics and report errors" }
explain_fstatvfs_or_die(3)
get file system statistics and report errors require_index { "get file system statistics and report errors" }
explain_statfs_or_die(3)
get file system statistics and report errors require_index { "get file system statistics and report errors" }
explain_statvfs_or_die(3)
get file system statistics and report errors require_index { "get file system statistics and report errors" }
explain_ustat_or_die(3)
get file system statistics and report errors require_index { "get file system statistics and report errors" }
exrstats(1)
display statistics about the contents of an OpenEXR image
gather(1)
-- collect and display system statistics
git-author-stat(1)
show commit author statistics of a git repository
git-effort(1)
Show effort statistics on file(s)
git-revert-stats(1)
show reverting statistics of a git repository
gruftistats(1)
generates statistics and quotes from an IRC log
gstopd(8)
stop disks in the case of inactivity using GEOM statistics
hashdig-stat(1), hashdig-stat.pl(1)
Produce statistics on HashDig files
hmmstat(1)
summary statistics for a profile file
htdb_load(1)
displays statistics for Berkeley DB environments
htdb_stat(1)
displays statistics for Berkeley DB environments
htstat(1)
returns statistics on the document and word databases, much like the -s option to htdig or htmerge
ifstat(1)
Report InterFace STATistics
inotifywatch(1), fsnotifywatch(1)
gather filesystem access statistics using inotify or fanotify
ioztat(8)
display logical I/O statistics for ZFS datasets
ipa_conv(8)
-- IPA accounting/database module for converting statistics
ipa_st_sdb(8)
-- IPA simple database module (statistics part)
ipaggcreate(1)
produce aggregate statistics of network traffic or trace
ipaggmanip(1)
manipulate aggregate statistics, often of network traffic
ipastat(8)
-- statistics viewer
ipv6logconv(8)
HTTP server log file converter for statistics
ipv6logstats(8)
Takes http log data from stdin and print a statistics table on output
k4dirstat(1)
Graphical directory statistics
knet_handle_get_stats(3)
Get statistics for compression & crypto
knet_link_get_status(3)
Get the status (and statistics) for a link
lh_stats(3), lh_node_stats(3), lh_node_usage_stats(3), lh_stats_bio(3), lh_node_stats_bio(3), lh_node_usage_stats_bio(3)
LHASH statistics
libssh2_sftp_statvfs(3), libssh2_sftp_fstatvfs(3)
get file system statistics
llvm-locstats-devel(1), llvm-locstats(1)
calculate statistics on DWARF debug location
llvm-locstats-morello(1), llvm-locstats(1)
calculate statistics on DWARF debug location
llvm-locstats10(1), llvm-locstats(1)
calculate statistics on DWARF debug location
llvm-locstats11(1), llvm-locstats(1)
calculate statistics on DWARF debug location
llvm-locstats12(1), llvm-locstats(1)
calculate statistics on DWARF debug location
llvm-locstats13(1), llvm-locstats(1)
calculate statistics on DWARF debug location
llvm-locstats14(1), llvm-locstats(1)
calculate statistics on DWARF debug location
mailstats(8)
display mail statistics
mate-power-statistics(1)
MATE power statistics GUI
milter-report-statistics(1), milter-statistics-report(1)
milter process statistics reporter
mpxstats(8)
Multiplexing Monitor Statistics daemon
nbdkit-stats-filter(1)
display statistics about operations
nifmon(8)
display network interface status, statistics and data
ninpaths(8)
Report Usenet Path header field statistics (new inpaths)
nn_get_statistic(3)
retrieve statistics from nanomsg socket
nnstats(1m)
display nnmaster collection and expire statistics
nnusage(1m)
display nn usage statistics
notcurses_stats(3)
notcurses runtime statistics
ompl_benchmark_statistics(1)
parser for log files from ompl planners
opendmarc-importstats(8)
import OpenDMARC statistics/history data
owmon(1)
Monitor for owserver settings and statistics
pcap_stats(3)
get capture statistics
pcpustat(1)
per-CPU usage statistics
pfstat(8)
collect packet filter statistics and generate graphs
pfstatd(8)
small daemon providing pf statistics over network
pkg-stats(8), pkg stats(8)
display package database statistics
pload(1)
display network interface statistics in an X window
qdirstat(1), QDirStat(1)
Qt-based directory statistics
rendertarget_metrics(3), rendertarget_metrics (3)
Retrieve statistics about the state of a rendertarget pipeline
restic-stats(1)
Scan the repository and show basic statistics
saidar(1)
a curses-based tool for viewing system statistics
samtools-ampliconstats(1), samtools ampliconstats(1)
produces statistics from amplicon sequencing alignment file EX in +\$1 nf ft CR . EE ft fi in
samtools-idxstats(1), samtools idxstats(1)
reports alignment summary statistics EX in +\$1 nf ft CR . EE ft fi in
samtools-stats(1), samtools stats(1)
produces comprehensive statistics from alignment file EX in +\$1 nf ft CR . EE ft fi in
sendinpaths(8)
Send Usenet Path header field statistics via e-mail
sg_comp_init(3), sg_comp_destroy(3), sg_comp_get_tls(3), sg_global_lock(3), sg_global_unlock(3)
managing system statistics delivery
sg_get_disk_io_stats(3), sg_get_disk_io_stats_r(3), sg_get_disk_io_stats_diff(3), sg_get_disk_io_stats_diff_between(3), sg_free_disk_io_stats(3), sg_disk_io_compare_name(3), sg_disk_io_compare_traffic(3)
get disk io statistics
sg_get_fs_stats(3), sg_get_fs_stats_r(3), sg_get_fs_stats_diff(3), sg_get_fs_stats_diff_between(3), sg_free_fs_stats(3), sg_get_valid_filesystems(3), sg_set_valid_filesystems(3), sg_fs_compare_device_name(3), sg_fs_compare_mnt_point(3)
get file system statistics
sg_get_host_info(3), sg_get_host_info_r(3), sg_free_host_info(3)
get general operating system statistics
sg_get_mem_stats(3), sg_get_mem_stats_r(3), sg_free_mem_stats(3), sg_get_swap_stats(3), sg_get_swap_stats_r(3), sg_free_swap_stats(3)
get VM statistics
sg_get_network_iface_stats(3), sg_get_network_iface_stats_r(3), sg_free_network_iface_stats(3), sg_network_iface_compare_name(3)
get network interface statistics
sg_get_network_io_stats(3), sg_get_network_io_stats_r(3), sg_get_network_io_stats_diff(3), sg_get_network_io_stats_diff_between(3), sg_free_network_io_stats(3), sg_network_io_compare_name(3)
get network statistics
sg_get_page_stats(3), sg_get_page_stats_r(3), sg_get_page_stats_diff(3), sg_get_page_stats_diff_between(3), sg_free_page_stats(3)
get paging statistics
sg_get_process_stats(3), sg_get_process_stats_r(3), sg_get_process_count(3), sg_get_process_count_of(3), sg_get_process_count_r(3), sg_free_process_count(3), sg_process_compare_name(3), sg_process_compare_pid(3), sg_process_compare_uid(3), sg_process_compare_gid(3), sg_process_compare_size(3), sg_process_compare_res(3), sg_process_compare_cpu(3), sg_process_compare_time(3)
get process statistics
sg_internal-intro(3)
get system statistics
sg_intro(3)
get system statistics
ss-manager(1)
ss-server controller for multi-user management and traffic statistics
statgrab(1)
sysctl-style interface to system statistics
statgrab(3), libstatgrab(3)
get system statistics
syslog-ng-ctl(1)
Display message statistics and enable verbose, debug and trace modes in
tcpstat(1)
report network interface statistics
torrus_configinfo(1), configinfo(1)
Displays useful statistics for all Torrus trees
tracker-status(1)
Provide status and statistics on the data indexed
traflog(1), -(1)
traflog show traffic statistics collected and stored by trafd
trafstat(1), -(1)
trafstat grab current traffic statistics from daemon
trafstatd(8), -(8)
trafstatd ip traffic statistics daemon
turbostat(8)
Report processor frequency and idle statistics
types.db(5)
Data-set specifications for the system statistics collection daemon collectd
varnishstat(1)
Varnish Cache statistics
wmnet(1)
Network Statistics Monitor for WindowMaker
wnstats(7)
WordNet 3.0 database statistics
wxcas(1)
wx c aMule statistics
xas(1)
X-Chat aMule Statistics
xcpustate(1)
display CPU states (idle, nice, system, kernel) statistics
xisp(1)
an X11/XForms based, user-friendly interface to pppd/chat, a simple ISP and phone company (PTT) database manager, and a dialup costs and usage logging/statistics tool
xldlas(1)
-- A Program for Statistics
xsysstats(1)
displays system statistics in a strip graph
znapzendztatz(1)
znapzend statistics utility
zpool-iostat(8)
display logical I/O statistics for ZFS storage pools
zpool_influxdb(8)
collect ZFS pool statistics in InfluxDB line protocol format
Baseball::Sabermetrics(3)
A Baseball Statistics Module
Bio::Align::DNAStatistics(3)
Calculate some statistics for a DNA alignment
Bio::Align::PairwiseStatistics(3)
Base statistic object for Pairwise Alignments
Bio::Align::ProteinStatistics(3)
Calculate Protein Alignment statistics (mostly distances)
Bio::Align::StatisticsI(3)
Calculate some statistics for an alignment
Bio::Search::BlastStatistics(3)
An object for Blast statistics
Bio::Search::GenericStatistics(3)
An object for statistics
Bio::Search::StatisticsI(3)
A Base object for statistics
Bio::Search::Tiling::MapTiling(3)
An implementation of an HSP tiling algorithm, with methods to obtain frequently-requested statistics
Bio::Tools::SeqStats(3)
Object holding statistics for one particular sequence
Bio::Tools::SeqWords(3)
Object holding n-mer statistics for a sequence
Bio::Tree::Statistics(3)
Calculate certain statistics for a Tree
CHI::Stats(3)
Record and report per-namespace cache statistics
Catalyst::Stats(3)
Catalyst Timing Statistics Class
Cisco::UCS::Chassis::Stats(3)
Class for operations with Cisco UCS chassis power statistics
Cisco::UCS::Common::PowerStats(3)
Class for operations with Cisco UCS power usage statistics
Cisco::UCS::Interconnect::Stats(3)
Utility class for representing Cisco UCS Interconnect system statistics
DBIx::Class::Storage::Statistics(3)
SQL Statistics
Devel::Cover::Report::Clover(3)
Backend for Clover reporting of coverage statistics
Filesys::ZFS::Stat(3)
read ZFS statistics on FreeBSD
Gungho::Plugin::Statistics(3)
Gather Crawler Statistics
Gungho::Plugin::Statistics::Format::XML(3)
Format Statistics As XML
Math::GSL::Statistics(3)
Statistical functions
Math::SymbolicX::Statistics::Distributions(3)
Statistical Distributions
Memcached::libmemcached::memcached_stats(3), memcached_stat(3), memcached_stat_servername(3), memcached_stat_get_value(3), memcached_stat_get_keys(3)
Get memcached statistics
Net::DNSBL::Statistics(3)
gather DNSBL Statistics
Paws::CloudWatch::GetMetricStatistics(3)
Arguments for method GetMetricStatistics on Paws::CloudWatch
Paws::SES::GetSendStatistics(3)
Arguments for method GetSendStatistics on Paws::SES
Perl::Critic::Statistics(3)
Compile stats on Perl::Critic violations
Statistics::Basic(3)
A collection of very basic statistics modules
Statistics::Basic::ComputedVector(3)
a class for computing filtered vectors
Statistics::Basic::Correlation(3)
find the correlation between two lists
Statistics::Basic::Covariance(3)
find the covariance between two lists
Statistics::Basic::LeastSquareFit(3)
find the least square fit for two lists
Statistics::Basic::Mean(3)
find the mean of a list
Statistics::Basic::Median(3)
find the median of a list
Statistics::Basic::Mode(3)
find the mode of a list
Statistics::Basic::StdDev(3)
find the standard deviation of a list
Statistics::Basic::Variance(3)
find the variance of a list
Statistics::Basic::Vector(3)
a class for handling lists of numbers
Statistics::Basic::_OneVectorBase(3)
base class objects like Mean
Statistics::Basic::_TwoVectorBase(3)
base class objects like Correlation
Statistics::Benford(3)
calculate the deviation from Benford's Law
Statistics::CaseResampling(3)
Efficient resampling and calculation of medians with confidence intervals
Statistics::ChiSquare(3), "Statistics::ChiSquare"(3)
How well-distributed is your data?
Statistics::Contingency(3)
Calculate precision, recall, F1, accuracy, etc
Statistics::Descriptive(3)
Module of basic descriptive statistical functions
Statistics::Descriptive::Discrete(3)
Compute descriptive statistics for discrete data sets. To install, use the CPAN module (https://metacpan.org/pod/Statistics::Descriptive::Discrete)
Statistics::Descriptive::Smoother(3)
Base module for smoothing statistical data
Statistics::Descriptive::Smoother::Exponential(3)
Implement exponential smoothing
Statistics::Descriptive::Smoother::Weightedexponential(3), Statistics::Descriptive::Smoother::Weigthedexponential(3)
Implement weighted exponential smoothing
Statistics::Distributions(3)
Perl module for calculating critical values and upper probabilities of common statistical distributions
Statistics::Forecast(3)
calculates a future value
Statistics::LTU(3)
An implementation of Linear Threshold Units
Statistics::LineFit(3)
Least squares line fit, weighted or unweighted
Statistics::Lite(3)
Small stats stuff
Statistics::OLS(3)
perform ordinary least squares and associated statistics, v 0.07
Statistics::PointEstimation(3)
Perl module for computing confidence intervals in parameter estimation with Student's T distribution Statistics::PointEstimation::Sufficient - Perl module for computing the confidence intervals using sufficient statistics
Statistics::R(3)
Perl interface with the R statistical program
Statistics::R::Legacy(3)
Legacy methods for Statistics::R
Statistics::R::Win32(3)
Helper functions for Statistics::R on MS Windows platforms
Statistics::Regression(3), Regression.pm(3)
weighted linear regression package (line+plane fitting)
Statistics::TTest(3), Statistics::TTest(3)
Perl module to perform T-test on 2 independent samples Statistics::TTest::Sufficient - Perl module to perfrom T-Test on 2 indepdent samples using sufficient statistics
SyslogScan::ByGroup(3)
-- Organizes a Summary of mail statistics into Groups of related e-mail users
TAP::Harness(3)
Run test scripts with statistics
Tail::Stat(3)
Real-time log statistics server
Tail::Stat::Plugin::apache(3)
Statistics collector for Apache web-server
Tail::Stat::Plugin::clamd(3)
Statistics collector for ClamAV clamd
Tail::Stat::Plugin::cvsupd(3)
Statistics collector for CVSupd server
Tail::Stat::Plugin::icecast(3)
Statistics collector for Icecast streaming server
Tail::Stat::Plugin::nginx(3)
Statistics collector for Nginx web-server
Tail::Stat::Plugin::spamd(3)
Statistics collector for SpamAssassin spamd
Test::Harness(3)
Run Perl standard test scripts with statistics
Unix::Statgrab::sg_cpu_stats(3)
container for libstatgrab CPU statistics
Unix::Statgrab::sg_disk_io_stats(3)
container for libstatgrab disk I/O statistics
Unix::Statgrab::sg_fs_stats(3)
container for libstatgrab filesystem statistics
Unix::Statgrab::sg_load_stats(3)
container for libstatgrab load average statistics
Unix::Statgrab::sg_mem_stats(3)
container for libstatgrab memory statistics
Unix::Statgrab::sg_network_iface_stats(3)
container for libstatgrab network interface statistics
Unix::Statgrab::sg_network_io_stats(3)
container for libstatgrab network I/O statistics
Unix::Statgrab::sg_page_stats(3)
container for libstatgrab paging statistics
Unix::Statgrab::sg_process_stats(3)
container for libstatgrab process statistics
Unix::Statgrab::sg_swap_stats(3)
container for libstatgrab swap space statistics
bup-memtest(1)
test bup memory usage statistics
bwstat(1)
list statistics related to a black and white bw image
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.21.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
cover(1)
report coverage statistics
cpancover(1)
report coverage statistics on CPAN modules
db.univar(1), db.univar (1)
Calculates univariate statistics on selected table column
gmtst(1)
compute statistics on mappings
gotst(1), gomtst(1)
compute statistics on sparse matrix orderings
gstat-rs(8), gstat(8)
print statistics about GEOM disks
i.gensig(1), i.gensig (1)
Generates statistics for i.maxlik from raster map
i.gensigset(1), i.gensigset (1)
Generates statistics for i.smap from raster map
jstat(1)
monitor JVM statistics
mailstat.pl(1)
shows mail-arrival statistics
pixstat(1)
list statistics related to a color pix image
r.in.lidar(1), r.in.lidar (1)
Creates a raster map from LAS LiDAR points using univariate statistics
r.in.pdal(1), r.in.pdal (1)
Creates a raster map from LAS LiDAR points using univariate statistics
r.in.xyz(1), r.in.xyz (1)
Creates a raster map from an assemblage of many coordinates using univariate statistics
r.report(1), r.report (1)
Reports statistics for raster maps
r.statistics(1), r.statistics (1)
Calculates category or object oriented statistics
r.stats(1), r.stats (1)
Generates area statistics for raster map
r.stats.zonal(1), r.stats.zonal (1)
Calculates category or object oriented statistics (accumulator-based statistics)
r.support.stats(1), r.support.stats (1)
Update raster map statistics
r.univar(1), r.univar (1)
Calculates univariate statistics from the non-null cells of a raster map. Statistics include number of cells counted, minimum and maximum cell values, range, arithmetic mean, population variance, standard deviation, coefficient of variation, and sum
r3.in.lidar(1), r3.in.lidar (1)
Creates a 3D raster map from LAS LiDAR points using univariate statistics
r3.in.xyz(1), r3.in.xyz (1)
Create a 3D raster map from an assemblage of many coordinates using univariate statistics
r3.stats(1), r3.stats (1)
Generates volume statistics for 3D raster maps
r3.univar(1), r3.univar (1)
Calculates univariate statistics from the non-null cells of a 3D raster map. Statistics include number of cells counted, minimum and maximum cell values, range, arithmetic mean, population variance, standard deviation, coefficient of variation, and sum
rdiff-backup-statistics(1)
summarize rdiff-backup statistics files
rtpstats.pl(1)
Displays packet statistics for an RTP session
t.rast.univar(1), t.rast.univar (1)
Calculates univariate statistics from the non-null cells for each registered raster map of a space time raster dataset
t.rast3d.univar(1), t.rast3d.univar (1)
Calculates univariate statistics from the non-null cells for each registered 3D raster map of a space time 3D raster dataset
t.vect.univar(1), t.vect.univar (1)
Calculates univariate statistics of attributes for each registered vector map of a space time vector dataset
v.db.univar(1), v.db.univar (1)
Calculates univariate statistics on selected table column for a GRASS vector map
v.rast.stats(1), v.rast.stats (1)
Calculates univariate statistics from a raster map based on a vector map and uploads statistics to new attribute columns
v.report(1), v.report (1)
Reports geometry statistics for vector maps
v.univar(1), v.univar (1)
Calculates univariate statistics of vector map features. Variance and standard deviation is calculated only for points if specified
v.vect.stats(1), v.vect.stats (1)
Count points in areas, calculate statistics from point attributes
home | help