Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
geom_map(4)
GEOM module that maps defined items as separate partitions
krb5_principal_intro(3)
The principal handing functions. A Kerberos principal is a email address looking string that contains to parts separeted by a @. The later part is the kerbero realm the principal belongs to and the former is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
ng_split(4)
netgraph node to separate incoming and outgoing flows
strsep(3)
separate strings
AG_Separator(3)
agar cosmetic separator widget
CDKparamNumber(3), CDKparamNumber CDKparamNumber2 CDKparamString CDKparamString2 CDKparseParams CDKparsePosition CDKparamValue cdk_params(3)
Cdk command-line parsing
Tcl_AllocStatBuf.tcl85(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
XmCreateSeparator(3)
The Separator widget creation function "XmCreateSeparator" "creation functions" "XmCreateSeparator"
XmCreateSeparatorGadget(3)
The SeparatorGadget creation function "XmCreateSeparatorGadget" "creation functions" "XmCreateSeparatorGadget"
XmMainWindowSep1(3)
A MainWindow function that returns the widget ID of the first Separator "XmMainWindowSep1" "MainWindow functions" "XmMainWindowSep1"
XmMainWindowSep2(3)
A MainWindow function that returns the widget ID of the second Separator widget "XmMainWindowSep2" "MainWindow functions" "XmMainWindowSep2"
XmMainWindowSep3(3)
A MainWindow function that returns the widget ID of the third Separator widget "XmMainWindowSep3" "MainWindow functions" "XmMainWindowSep3"
XmSeparator(3)
The Separator widget class "XmSeparator" "widget class" "Separator"
XmSeparatorGadget(3)
The SeparatorGadget widget class "XmSeparatorGadget" "widget class" "SeparatorGadget"
XmStringIsVoid(3)
A compound string function that provides information on the existence of non-zero-length text components, tab components, or separator components "XmStringIsVoid" "compound string functions" "XmStringIsVoid"
XmStringLineCount(3)
A compound string function that returns the number of separators plus one in the provided compound string "XmStringLineCount" "compound string functions" "XmStringLineCount"
XmStringSeparatorCreate(3)
A compound string function that creates a compound string "XmStringSeparatorCreate" "compound string functions" "XmStringSeparatorCreate"
XmVaCreateSeparatorGadget(3)
XmVaCreateManagedSeparatorGadget A SeparatorGadget widget convenience creation functions. "XmVaCreateToggleSeparatorGadget" "XmVaCreateManagedSeparatorGadget" "creation functions" "XmVaCreateSeparatorGadget"
XmtLayoutSeparator(3)
an XmtLayout gadget that draws a line
activateCDKDialog(3), activateCDKDialog destroyCDKDialog drawCDKDialog drawCDKDialogButtons eraseCDKDialog getCDKDialog getCDKDialogBox getCDKDialogHighlight getCDKDialogSeparator injectCDKDialog moveCDKDialog newCDKDialog positionCDKDialog setCDKDialog setCDKDialogBackgroundAttrib setCDKDialogBackgroundColor setCDKDialogBox setCDKDialogBox setCDKDialogBoxAttribute setCDKDialogHighlight setCDKDialogHorizontalChar setCDKDialogLLChar setCDKDialogLRChar setCDKDialogPostProcess setCDKDialogPreProcess setCDKDialogSeparator setCDKDialogULChar setCDKDialogURChar setCDKDialogVerticalChar cdk_dialog(3)
curses dialog widget
bogolexer(1)
Utility program for separating email messages into tokens
csepdjvu(1)
DjVu encoder for separated data files
csv(3m)
parse comma separated values
dcl2inc(1)
postprocess ftnchek .dcl files to create separate INCLUDE files
expect_multixterm(1), multixterm(1)
drive multiple xterms separately or together
fix_filename_slashes(3)
Converts all the directory separators to a standard character. Allegro game programming library
flacon(1)
Extracts audio tracks from an audio CD image to separate tracks
gri_unpage(1)
split a multi-page Gri output file into separate files
kpsewhere(1)
Expanding kpsewhich to separately iterate over each texmf tree listed in $TEXMF
krb5_principal_intro(3), krb5_principal_introThe principal handing functions.(3)
A Kerberos principal is a email address looking string that contains two parts separated by . The second part is the kerberos realm the principal belongs to and the first is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
montage(1)
create a composite image by combining several separate images. The images are tiled on the composite image optionally adorned with a border, frame, image name, and more
msgno(3m)
manage error codes and associated messages across separate libraries
ogmdemux(1)
Extract streams from OGG/OGM files into separate files
paction(3)
actions in a separate thread
pcre2_set_glob_separator(3), PCRE2(3)
Perl-compatible regular expressions (revised API)
pdfseparate(1)
Portable Document Format (PDF) page extractor
pgrphack(8)
runs a program in a separate process group
ppmtorgb3(1)
separate a PPM image into three PGMs lbAC
put_backslash(3)
Puts a path separator at the end of a path if needed. Allegro game programming library
raconvert(1)
convert comma-separated ASCII argus(8) data, to binary argus(8) data
rlesplit(1)
split a file of concatenated RLE images into separate image files
rtbl_create(3), rtbl_destroy(3), rtbl_set_flags(3), rtbl_get_flags(3), rtbl_set_prefix(3), rtbl_set_separator(3), rtbl_set_column_prefix(3), rtbl_set_column_affix_by_id(3), rtbl_add_column(3), rtbl_add_column_by_id(3), rtbl_add_column_entry(3), rtbl_add_column_entry_by_id(3), rtbl_new_row(3), rtbl_format(3)
format data in simple tables
sc_ThreadGrp(3), sc::ThreadGrp(3)
The ThreadGrp abstract class provides a means to manage separate threads of control
scor2prt(1)
source-parts separation program for pmx, a MusiXTeX preprocessor
shtool-slo(1), shtool slo(1)
GNU shtool separate linker options by library class
shtool-table(1), shtool table(1)
GNU shtool pretty-print a field-separated list
tiffsplittiles(1)
Copies tiles from a tiled TIFF file into separate TIFF files
ttk::separator.tk85(n), ttk::separator(n)
Separator bar
ttk_separator.tk86(n), ttk::separator(n)
Separator bar
uid_wrapper(1)
A wrapper to fake privilege separation
yuvsplittoppm(1)
convert separate Y, U, and V files into a PPM image lbAC
yuvycsnoise(1)
Noise filter specialized for NTSC Y/C separation noise
zck_gen_zdict(1)
extract a dictionary and optionally the separate chunks from a zdict file
Alien::Build::Plugin::Gather::IsolateDynamic(3)
Plugin to gather dynamic libraries into a separate directory
Astro::Catalog::IO::TST(3)
Standard Tab Separated Table format I/O
Benchmark::Forking(3)
Run benchmarks in separate processes
Biber::Config(3)
Configuration items which need to be saved across the lifetime of a Biber object This class contains a static object and static methods to access configuration and state data. There are several classes of data in here which have separate accessors: * Biber options * Biblatex options * State information used by Biber as it processes entries * displaymode date
BorderStyle::ASCII::None(3)
No borders, but data row separator is still drawn using dashes
BorderStyle::ASCII::Space(3)
Space as borders, but data row separator is still drawn using dashes
BorderStyle::ASCII::SpaceInnerOnly(3)
No borders, but columns are still separated using spaces and data row separator is still drawn using dashes
BorderStyle::BoxChar::None(3)
No borders, but data row separator is still drawn using horizontal line
BorderStyle::BoxChar::Space(3)
Space as borders, but data row separator is still drawn using horizontal line
BorderStyle::BoxChar::SpaceInnerOnly(3)
No borders, but columns are still separated using spaces and data row separator is still drawn using horizontal line
BorderStyle::UTF8::None(3)
No borders, but data row separator is still drawn using horizontal line
BorderStyle::UTF8::Space(3)
Space as borders, but data row separator is still drawn using horizontal line
BorderStyle::UTF8::SpaceInnerOnly(3)
No borders, but columns are still separated using spaces and data row separator is still drawn using horizontal line
CSS::Sass::Value(3)
Data Types for custom Sass Functions n .SH "Mapping ""Sass_Values"" to perl data structures" .SH "Mapping Sass_Values to perl data structures" Header "Mapping Sass_Values to perl data structures" You can use maps and lists like normal hash or array references. Lists can have two different separators used for stringification. This is detected by checking if the object is derived from CSS::Sass::Value::List::Space. The default is a comma separated list, which you get by instantiating CSS::Sass::Value::List or CSS::Sass::Value::List::Comma. my $null = CSS::Sass::Value->new(undef); # => null my $number = CSS::Sass::Value->new(42.35); # => 42.35 my $string = CSS::Sass::Value->new("foobar"); # => foobar my $map = CSS::Sass::Value->new({ key => "foobar" }); # key: foobar my $list = CSS::Sass::Value->new([ "foo", 42, "bar" ]); # foo, 42, bar my $space = CSS::Sass::Value::List::Space->new("foo", "bar"); # foo bar my $comma = CSS::Sass::Value::List::Comma->new("foo", "bar"); # foo, bar You can also return these native perl types from custom functions. They will automatically be upgraded to real CSS::Sass::Value objects. All types overload the stringify and eq operators (so far)
Font::TTF::AATutils(3)
Utility functions for AAT tables n .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" Subsection "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" n .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" Subsection "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" $packEntry is a subroutine for packing an entry into binary form, called as $dat = $packEntry($entry, $entryTable, $numEntries) where the entry is a comma-separated list of nextStateOffset, flags, actions n .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" Subsection "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" n .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" Subsection "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" n .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" Subsection "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)"
Gantry::Conf::FAQ(3)
Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ script.pl --instance=app1-dev instead of: $ script.pl --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
Gearman::ResponseParser(3)
gearmand abstract response parser implementation
Gearman::ResponseParser::Taskset(3)
gearmand response parser implementation
Gtk2::Ex::FormFactory::HSeparator(3)
A HSeparator in a FormFactory framework
Gtk2::Ex::FormFactory::VSeparator(3)
A VSeparator in a FormFactory framework
Gtk2::HSeparator(3)
wrapper for GtkHSeparator
Gtk2::Separator(3)
wrapper for GtkSeparator
Gtk2::SeparatorMenuItem(3)
wrapper for GtkSeparatorMenuItem
Gtk2::SeparatorToolItem(3)
wrapper for GtkSeparatorToolItem
Gtk2::VSeparator(3)
wrapper for GtkVSeparator
IO::TieCombine(3)
produce tied (and other) separate but combined variables
Log::Dispatch::Dir(3)
Log messages to separate files in a directory, with rotate options
MDOM::Token::Separator(3)
Makefile separators like colons and leading tabs
Mail::AuthenticationResults::Token::Separator(3)
Class for modelling AuthenticationResults Header parts detected as separators
Mail::Box::Locker::DotLock(3)
lock a folder with a separate file
Mail::Box::Locker::NFS(3)
lock a folder with a separate file, NFS-safe
Moose::Cookbook::Basics::DateTime_ExtendingNonMooseParent(3)
Extending a non-Moose parent class
OpenXPKI::MooseParams(3), Header "Name" OpenXPKI::MooseParams(3)
Wrapper around some of MooseX::Params::Validate's functions
PDF::API2::Resource::ColorSpace::Separation(3)
Support for color space separations
PPI::Token::Separator(3)
The _|_DATA_|_ and _|_END_|_ tags
Perl::Critic::Policy::Modules::ProhibitMultiplePackages(3)
Put packages (especially subclasses) in separate files
Perl::Critic::Policy::ValuesAndExpressions::ProhibitCommaSeparatedStatements(3)
Don't use the comma operator as a statement separator
Perl::Critic::Policy::ValuesAndExpressions::RequireNumberSeparators(3)
Write " 141_234_397.0145 " instead of " 141234397.0145 "
Perl::Critic::Policy::Variables::ProhibitPerl4PackageNames(3)
Use double colon (::) to separate package name components instead of single quotes (')
Rose::HTML::Form::Field::DateTime::Range(3)
Compound field for date ranges with separate text fields for the minimum and maximum dates
Rose::HTML::Form::Field::DateTime::Split::MDYHMS(3)
Compound field for dates with separate text fields for month, day, year, hour, minute, and second, and a pop-up menu for AM/PM
Rose::HTML::Form::Field::DateTime::Split::MonthDayYear(3)
Compound field for dates with separate text fields for month, day, and year
Rose::HTML::Form::Field::PhoneNumber::US::Split(3)
Compound field for US phone numbers with separate fields for area code, exchange, and number
Rose::HTML::Form::Field::Set(3)
Text area that accepts whitespace- or comma-separated strings
Rose::HTML::Form::Field::Time::Split::HourMinuteSecond(3)
Compound field for times with separate text fields for hour, minute, and second, and a pop-up menu for selecting AM or PM
Text::CSV(3)
comma-separated values manipulator (using XS or PurePerl)
Text::CSV_XS(3)
comma-separated values manipulation routines
Text::Diff::Config(3)
global configuration for Text::Diff (as a separate module)
Text::LTSV(3)
Labeled Tab Separated Value manipulator
Text::Tags(3)
parses "folksonomy" space-separated tags (stub module)
Text::Tags::Parser(3)
parses "folksonomy" space-separated tags
Text::xSV(3)
read character separated files
Verilog::EditFiles(3)
Split Verilog modules into separate files
XML::Pastor::Builtin::List(3)
Ancestor of all classes that correspond to whitespace separated list W3C simple types
XML::Pastor::Builtin::Union(3)
Ancestor of all classes that correspond to whitespace separated union W3C simple types
XML::XBEL::Separator(3)
OOP for reading and writing XBEL separators
csv2po(1), csv2po.py(1)
Convert Comma-Separated Value (.csv) files to Gettext PO localization files
csv2tbx(1), csv2tbx.py(1)
Convert Comma-Separated Value (.csv) files to a TermBase eXchange (.tbx) glossary file
g.dirseps(1), g.dirseps (1)
Internal GRASS utility for converting directory separator characters. Converts any directory separator characters in the input string to or from native host format, and writes the changed path to standard output. Useful in scripts for Windows compatibility
pixbustup(1)
break up concatenated pix images into separate files
pixuntile(1)
break image up into separate files
po2csv(1), po2csv.py(1)
Convert Gettext PO localization files to Comma-Separated Value (.csv) files
shells(nged)
Separates the specified NMG shape into its constituent shells
splitdiff(1)
separate out incremental patches
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
tv_split(1)
Split XMLTV listings into separate files by date and channel
home | help