Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PCBGROUP(9)
Distributed Protocol Control Block Groups
arp(4)
Address Resolution Protocol
au_bsm_to_domain(3), au_domain_to_bsm(3)
convert between BSM and local protocol domains
bind(2)
assign a local protocol address to a socket
bindat(2)
assign a local protocol address to a socket
bluetooth.protocols(5)
Bluetooth Protocol Service Multiplexor database
bootpd(8), bootpgw(8)
Internet Boot Protocol server/gateway
bootptab(5)
Internet Bootstrap Protocol server database
bthost(1)
look up Bluetooth host names and Protocol Service Multiplexor values
carp(4)
Common Address Redundancy Protocol
dhclient(8)
Dynamic Host Configuration Protocol (DHCP) client
dhcp-options(5)
Dynamic Host Configuration Protocol options
dtrace_ip(4)
a DTrace provider for tracing events related to the IPv4 and IPv6 protocols
dtrace_sctp(4)
a DTrace provider for tracing events related to the sctp(4) protocol
dtrace_tcp(4)
a DTrace provider for tracing events related to the tcp(4) protocol
dtrace_udp(4)
a DTrace provider for tracing events related to the UDP protocol
dtrace_udplite(4)
a DTrace provider for tracing events related to the UDP-Lite protocol
ftp-proxy(8)
Internet File Transfer Protocol proxy daemon
ftpd(8)
Internet File Transfer Protocol server
getprotoent(3), getprotobynumber(3), getprotobyname(3), setprotoent(3), endprotoent(3)
get protocol entry
icmp(4)
Internet Control Message Protocol
icmp6(4)
Internet Control Message Protocol for IPv6
igmp(4)
Internet Group Management Protocol
inet(4)
Internet protocol family
inet6(4)
Internet protocol version 6 family
ip(4)
Internet Protocol
ip6(4)
Internet Protocol version 6 (IPv6) network layer
ipsec(4)
Internet Protocol Security protocol
iscsi_initiator(4)
kernel driver for the iSCSI protocol
lp(4)
printer port Internet Protocol driver
mld(4)
Multicast Listener Discovery Protocol
ndp(8)
control/diagnose IPv6 neighbor discovery protocol
netdump(4)
protocol for transmitting kernel dumps to a remote server
netgdb(4)
protocol for debugging the kernel with GDB over the network
nfsv4(4), NFSv4(4)
NFS Version 4 Protocol
ng_cisco(4)
Cisco HDLC protocol netgraph node type
ng_l2cap(4)
Netgraph node type that implements Bluetooth Logical Link Control and Adaptation Protocol (L2CAP)
ng_l2tp(4)
L2TP protocol netgraph node type
ng_lmi(4)
frame relay LMI protocol netgraph node type
ng_ppp(4)
PPP protocol netgraph node type
ng_pppoe(4)
RFC 2516 PPPoE protocol netgraph node type
ng_pptpgre(4)
PPTP GRE protocol netgraph node type
ntp.conf(5)
Network Time Protocol (NTP) daemon configuration file format
ntp_adjtime(2), ntp_gettime(2)
Network Time Protocol (NTP) daemon interface system calls
pim(4)
Protocol Independent Multicast
pnfs(4), pNFS(4)
NFS Version 4.1 and 4.2 Parallel NFS Protocol
pnfsserver(4), pNFSserver(4)
NFS Version 4.1 and 4.2 Parallel NFS Protocol Server
ppp(8)
Point to Point Protocol (a.k.a. user-ppp)
protocols(5)
protocol name data base
pthread_mutexattr_init(3), pthread_mutexattr_destroy(3), pthread_mutexattr_setprioceiling(3), pthread_mutexattr_getprioceiling(3), pthread_mutexattr_setprotocol(3), pthread_mutexattr_getprotocol(3), pthread_mutexattr_setrobust(3), pthread_mutexattr_getrobust(3), pthread_mutexattr_settype(3), pthread_mutexattr_gettype(3)
mutex attribute operations
rmt(8)
remote magtape protocol module
rpc_gss_get_versions(3)
Get supported protocol version
rpc_gss_seccreate(3)
create a security context using the RPCSEC_GSS protocol
rpcgen(1)
an RPC protocol compiler
sbp(4)
Serial Bus Protocol 2 (SBP-2) Mass Storage Devices driver
sbp_targ(4)
Serial Bus Protocol 2 (SBP-2) Target Mode devices driver
sctp(4)
Internet Stream Control Transmission Protocol
sdpcontrol(8)
Bluetooth Service Discovery Protocol query utility
sdpd(8)
Bluetooth Service Discovery Protocol daemon
sntp(8)
standard Simple Network Time Protocol client program
sppp(4)
point to point protocol network layer for synchronous lines
sscop(1)
SSCOP transport protocol
sysdecode_socket_protocol(3)
lookup name of socket protocol
tcp(4)
Internet Transmission Control Protocol
telnet(1)
user interface to the TELNET protocol
telnetd(8)
DARPA TELNET protocol server
tftp-proxy(8)
Internet Trivial File Transfer Protocol proxy
tftpd(8)
Internet Trivial File Transfer Protocol server
trpt(8)
transliterate protocol trace
udp(4)
Internet User Datagram Protocol
udplite(4)
Lightweight User Datagram Protocol
unix(4)
UNIX-domain protocol family
BIO_lookup_type(3), BIO_ADDRINFO(3), BIO_ADDRINFO_next(3), BIO_ADDRINFO_free(3), BIO_ADDRINFO_family(3), BIO_ADDRINFO_socktype(3), BIO_ADDRINFO_protocol(3), BIO_ADDRINFO_address(3), BIO_lookup_ex(3), BIO_lookup(3)
BIO_ADDRINFO type and routines
SSL_CIPHER_get_name(3), SSL_CIPHER_standard_name(3), OPENSSL_cipher_name(3), SSL_CIPHER_get_bits(3), SSL_CIPHER_get_version(3), SSL_CIPHER_description(3), SSL_CIPHER_get_cipher_nid(3), SSL_CIPHER_get_digest_nid(3), SSL_CIPHER_get_handshake_digest(3), SSL_CIPHER_get_kx_nid(3), SSL_CIPHER_get_auth_nid(3), SSL_CIPHER_is_aead(3), SSL_CIPHER_find(3), SSL_CIPHER_get_id(3), SSL_CIPHER_get_protocol_id(3)
get SSL_CIPHER properties
SSL_CTX_set_alpn_protos(3), SSL_set_alpn_protos(3), SSL_CTX_set_alpn_select_cb(3), SSL_CTX_set_next_proto_select_cb(3), SSL_CTX_set_next_protos_advertised_cb(3), SSL_select_next_proto(3), SSL_get0_alpn_selected(3), SSL_get0_next_proto_negotiated(3)
handle application layer protocol negotiation (ALPN)
SSL_CTX_set_min_proto_version(3), SSL_CTX_set_max_proto_version(3), SSL_CTX_get_min_proto_version(3), SSL_CTX_get_max_proto_version(3), SSL_set_min_proto_version(3), SSL_set_max_proto_version(3), SSL_get_min_proto_version(3), SSL_get_max_proto_version(3)
Get and set minimum and maximum supported protocol version
SSL_CTX_set_msg_callback(3), SSL_CTX_set_msg_callback_arg(3), SSL_set_msg_callback(3), SSL_get_msg_callback_arg(3)
install callback for observing protocol messages
SSL_CTX_set_msg_callback(3), SSL_CTX_set_msg_callback_arg(3), SSL_set_msg_callback(3), SSL_set_msg_callback_arg(3)
install callback for observing protocol messages
SSL_SESSION_get_protocol_version(3), SSL_SESSION_set_protocol_version(3)
get and set the session protocol version
SSL_client_version(3), SSL_get_version(3), SSL_is_dtls(3), SSL_version(3)
get the protocol information of a connection
openssl-ocsp(1), ocsp(1)
Online Certificate Status Protocol utility
AllPlanes(3), BlackPixel(3), WhitePixel(3), ConnectionNumber(3), DefaultColormap(3), DefaultDepth(3), XListDepths(3), DefaultGC(3), DefaultRootWindow(3), DefaultScreenOfDisplay(3), DefaultScreen(3), DefaultVisual(3), DisplayCells(3), DisplayPlanes(3), DisplayString(3), XMaxRequestSize(3), XExtendedMaxRequestSize(3), LastKnownRequestProcessed(3), NextRequest(3), ProtocolVersion(3), ProtocolRevision(3), QLength(3), RootWindow(3), ScreenCount(3), ScreenOfDisplay(3), ServerVendor(3), VendorRelease(3)
Display macros and functions
BIO_lookup_type(3), BIO_ADDRINFO(3), BIO_ADDRINFO_next(3), BIO_ADDRINFO_free(3), BIO_ADDRINFO_family(3), BIO_ADDRINFO_socktype(3), BIO_ADDRINFO_protocol(3), BIO_ADDRINFO_address(3), BIO_lookup_ex(3), BIO_lookup(3)
BIO_ADDRINFO type and routines
BIO_lookup_type(3ossl), BIO_ADDRINFO(3ossl), BIO_ADDRINFO_next(3ossl), BIO_ADDRINFO_free(3ossl), BIO_ADDRINFO_family(3ossl), BIO_ADDRINFO_socktype(3ossl), BIO_ADDRINFO_protocol(3ossl), BIO_ADDRINFO_address(3ossl), BIO_lookup_ex(3ossl), BIO_lookup(3ossl)
BIO_ADDRINFO type and routines
CURLINFO_PROTOCOL(3)
get the protocol used in the connection
CURLINFO_SCHEME(3)
get the URL scheme (sometimes called protocol) used in the connection
CURLOPT_DEFAULT_PROTOCOL(3)
default protocol to use if the URL is missing a scheme name
CURLOPT_HAPROXYPROTOCOL(3)
send HAProxy PROXY protocol v1 header
CURLOPT_HTTP_VERSION(3)
specify HTTP protocol version to use
CURLOPT_IPRESOLVE(3)
specify which IP protocol version to use
CURLOPT_PROTOCOLS(3)
set allowed protocols
CURLOPT_PROXYTYPE(3)
proxy protocol type
CURLOPT_REDIR_PROTOCOLS(3)
set protocols allowed to redirect to
DMXSync(3)
flush protocol requests between Xdmx and back-end X servers
Munin::Common::TLS(3), Munin::Node::TLS(3)
Abstract base class implementing the STARTTLS protocol
Munin::Common::TLSClient(3), Munin::Node::TLSClient(3)
Implements the client side of the STARTTLS protocol
Munin::Common::TLSServer(3), Munin::Node::TLSServer(3)
Implements the server side of the STARTTLS protocol
OSSL_CRMF_MSG_set1_regCtrl_regToken(3ossl), OSSL_CRMF_MSG_set1_regCtrl_authenticator(3ossl), OSSL_CRMF_MSG_PKIPublicationInfo_push0_SinglePubInfo(3ossl), OSSL_CRMF_MSG_set0_SinglePubInfo(3ossl), OSSL_CRMF_MSG_set_PKIPublicationInfo_action(3ossl), OSSL_CRMF_MSG_set1_regCtrl_pkiPublicationInfo(3ossl), OSSL_CRMF_MSG_set1_regCtrl_protocolEncrKey(3ossl), OSSL_CRMF_MSG_set1_regCtrl_oldCertID(3ossl), OSSL_CRMF_CERTID_gen(3ossl)
functions setting CRMF Registration Controls
SSL_CIPHER_get_name(3), SSL_CIPHER_standard_name(3), OPENSSL_cipher_name(3), SSL_CIPHER_get_bits(3), SSL_CIPHER_get_version(3), SSL_CIPHER_description(3), SSL_CIPHER_get_cipher_nid(3), SSL_CIPHER_get_digest_nid(3), SSL_CIPHER_get_handshake_digest(3), SSL_CIPHER_get_kx_nid(3), SSL_CIPHER_get_auth_nid(3), SSL_CIPHER_is_aead(3), SSL_CIPHER_find(3), SSL_CIPHER_get_id(3), SSL_CIPHER_get_protocol_id(3)
get SSL_CIPHER properties
SSL_CIPHER_get_name(3ossl), SSL_CIPHER_standard_name(3ossl), OPENSSL_cipher_name(3ossl), SSL_CIPHER_get_bits(3ossl), SSL_CIPHER_get_version(3ossl), SSL_CIPHER_description(3ossl), SSL_CIPHER_get_cipher_nid(3ossl), SSL_CIPHER_get_digest_nid(3ossl), SSL_CIPHER_get_handshake_digest(3ossl), SSL_CIPHER_get_kx_nid(3ossl), SSL_CIPHER_get_auth_nid(3ossl), SSL_CIPHER_get_prf_nid(3ossl), SSL_CIPHER_is_aead(3ossl), SSL_CIPHER_find(3ossl), SSL_CIPHER_get_id(3ossl), SSL_CIPHER_get_protocol_id(3ossl)
get SSL_CIPHER properties
SSL_CTX_set_alpn_protos(3), SSL_set_alpn_protos(3), SSL_CTX_set_alpn_select_cb(3), SSL_CTX_set_next_proto_select_cb(3), SSL_CTX_set_next_protos_advertised_cb(3), SSL_select_next_proto(3), SSL_get0_alpn_selected(3), SSL_get0_next_proto_negotiated(3)
handle application layer protocol negotiation (ALPN)
SSL_CTX_set_alpn_protos(3ossl), SSL_set_alpn_protos(3ossl), SSL_CTX_set_alpn_select_cb(3ossl), SSL_CTX_set_next_proto_select_cb(3ossl), SSL_CTX_set_next_protos_advertised_cb(3ossl), SSL_select_next_proto(3ossl), SSL_get0_alpn_selected(3ossl), SSL_get0_next_proto_negotiated(3ossl)
handle application layer protocol negotiation (ALPN)
SSL_CTX_set_min_proto_version(3), SSL_CTX_set_max_proto_version(3), SSL_CTX_get_min_proto_version(3), SSL_CTX_get_max_proto_version(3), SSL_set_min_proto_version(3), SSL_set_max_proto_version(3), SSL_get_min_proto_version(3), SSL_get_max_proto_version(3)
Get and set minimum and maximum supported protocol version
SSL_CTX_set_min_proto_version(3ossl), SSL_CTX_set_max_proto_version(3ossl), SSL_CTX_get_min_proto_version(3ossl), SSL_CTX_get_max_proto_version(3ossl), SSL_set_min_proto_version(3ossl), SSL_set_max_proto_version(3ossl), SSL_get_min_proto_version(3ossl), SSL_get_max_proto_version(3ossl)
Get and set minimum and maximum supported protocol version
SSL_CTX_set_msg_callback(3), SSL_CTX_set_msg_callback_arg(3), SSL_set_msg_callback(3), SSL_set_msg_callback_arg(3)
install callback for observing protocol messages
SSL_CTX_set_msg_callback(3ossl), SSL_CTX_set_msg_callback_arg(3ossl), SSL_set_msg_callback(3ossl), SSL_set_msg_callback_arg(3ossl)
install callback for observing protocol messages
SSL_SESSION_get_protocol_version(3), SSL_SESSION_set_protocol_version(3)
get and set the session protocol version
SSL_SESSION_get_protocol_version(3ossl), SSL_SESSION_set_protocol_version(3ossl)
get and set the session protocol version
SSL_client_version(3), SSL_get_version(3), SSL_is_dtls(3), SSL_version(3)
get the protocol information of a connection
SSL_client_version(3ossl), SSL_get_version(3ossl), SSL_is_dtls(3ossl), SSL_version(3ossl)
get the protocol information of a connection
Tk_CreateErrorHandler.tk85(3), Tk_CreateErrorHandler(3), Tk_DeleteErrorHandler(3)
handle X protocol errors
Tk_CreateErrorHandler.tk86(3), Tk_CreateErrorHandler(3), Tk_DeleteErrorHandler(3)
handle X protocol errors
Tspi_ChangeAuthAsym(3)
change the authorization data of an entity using asymmetric change protocol
XSetWMProtocols(3), XGetWMProtocols(3)
set or read a window's WM_PROTOCOLS property
XcupQueryVersion(3)
Returns TOG-CUP protocol version supported by the X server
Xfixes(3), XFixes(3)
Augmented versions of core protocol requests
Xinerama(3)
API for Xinerama extension to X11 Protocol
XkbVirtualModsToReal(3)
Determines the mapping of virtual modifiers to core X protocol modifiers
XmActivateProtocol(3)
A VendorShell function that activates a protocol "XmActivateProtocol" "VendorShell functions" "XmActivateProtocol" "protocols"
XmActivateWMProtocol(3)
A VendorShell convenience interface that activates a protocol "XmActivateWMProtocol" "VendorShell functions" "XmActivateWMProtocol" "protocols"
XmAddProtocolCallback(3)
A VendorShell function that adds client callbacks for a protocol "XmAddProtocolCallback" "VendorShell functions" "XmAddProtocolCallback" "protocols"
XmAddProtocols(3)
A VendorShell function that adds the protocols to the protocol manager and allocates the internal tables "XmAddProtocols" "VendorShell functions" "XmAddProtocols" "protocols"
XmAddTabGroup(3)
A function that adds a manager or a primitive widget to the list of tab groups "XmAddTabGroup" "VendorShell functions" "XmAddTabGroup" "protocols"
XmAddWMProtocolCallback(3)
A VendorShell convenience interface that adds client callbacks for a protocol "XmAddWMProtocol\%Callback" "VendorShell functions" "XmAddWMProtocol\%Callback" "protocols"
XmAddWMProtocols(3)
A VendorShell convenience interface that adds the protocols to the protocol manager and allocates the internal tables "XmAddWMProtocol\%s" "VendorShell functions" "XmAddWMProtocol\%s" "protocols"
XmDeactivateProtocol(3)
A VendorShell function that deactivates a protocol without removing it "XmDeactivateProtocol" "protocols" "VendorShell functions" "XmDeactivateProtocol"
XmDeactivateWMProtocol(3)
A VendorShell convenience interface that deactivates a protocol without removing it "protocols" "XmDeactivateWMProtocol" "VendorShell functions" "XmDeactivateWMProtocol"
XmProtocol(3), XmProtocolClass(3)
internal Lesstif class
XmRemoveProtocolCallback(3)
A VendorShell function that removes a callback from the internal list "XmRemoveProtocol\%Callback" "VendorShell functions" "XmRemoveProtocol\%Callback" "protocols"
XmRemoveProtocols(3)
A VendorShell function that removes the protocols from the protocol manager and deallocates the internal tables "XmRemoveProtocols" "VendorShell functions" "XmRemoveProtocols" "protocols"
XmRemoveWMProtocolCallback(3)
A VendorShell convenience interface that removes a callback from the internal list "XmRemoveWMProtocol\%Callback" "VendorShell functions" "XmRemoveWMProtocol\%Callback" "protocols"
XmRemoveWMProtocols(3)
A VendorShell convenience interface that removes the protocols from the protocol manager and deallocates the internal tables "XmRemoveWMProtocols" "VendorShell functions" "XmRemoveWMProtocols" "protocols"
XmSetProtocolHooks(3)
A VendorShell function that allows preactions and postactions to be executed when a protocol message is received from MWM "XmSetProtocolHooks" "VendorShell functions" "XmSetProtocolHooks" "protocols"
XmSetWMProtocolHooks(3)
A VendorShell convenience interface that allows preactions and postactions to be executed when a protocol message is received from the window manager "XmSetWMProtocolHooks" "VendorShell functions" "XmSetWMProtocolHooks" "protocols"
XmtAddDeleteCallback(3), XmtAddDeleteCallback()(3), XmtAddSaveYourselfCallback()(3)
register callbacks for session management protocols
aecvsserver(1)
serve CVS client protocol against Aegis projects
afpcmd(1)
Transfer files over the networking using the Apple Filing Protocol (AFP)
afpd(8)
Apple Filing Protocol daemon
apcsmart(8)
Driver for American Power Conversion Smart Protocol UPS equipment
apcsmart-old(8)
Driver for American Power Conversion Smart Protocol UPS equipment
arcan-wayland(1)
protocol bridge for Wayland support in Arcan
ares_getnameinfo(3)
Address-to-nodename translation in protocol-independent manner
artsprotoagg(l)
utility to aggregate protocol table objects in time domain
artsprotos(l)
utility to display protocol table objects from ARTS files
ascii-xfr(1)
upload/download files using the ASCII protocol
au_domain(3), au_bsm_to_domain(3), au_domain_to_bsm(3)
convert between BSM and local protocol domains
auscope(1)
Network Audio System Protocol Filter auscope#(1) "" "auscope(1)"
bbftpd(1)
BBFTP protocol server
bcmxcp(8)
Driver for UPSes supporting the serial BCM/XCP protocol
bcmxcp_usb(8)
Experimental driver for UPSes supporting the BCM/XCP protocol over USB
bestups(8)
Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment
bgpctl(8)
control the Border Gateway Protocol daemon
bgpd.conf(5)
Border Gateway Protocol daemon configuration file
blazer_ser(8)
Driver for Megatec/Q1 protocol serial based UPS equipment
blazer_usb(8)
Driver for Megatec/Q1 protocol USB based UPS equipment
bozohttpd(8)
hyper text transfer protocol version 1.1 daemon
bsigs(8)
program for debugging burp protocol2 manifest files and indexes
bsparse(8)
program for regenerating burp protocol2 sparse files
btinfo(1)
BitTorrent Protocol Daemon information
btpd(1)
BitTorrent Protocol Daemon
bwping(8)
and bwping6 are tools to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism
centerim(1)
a text mode based IM client for Linux, *BSD, Sun Solaris, MacOS X and possibly, other Unices. ICQ2000, Yahoo!, AIM TOC, IRC, MSN, Gadu-Gadu and Jabber protocols are now supported. Internal LiveJournal client and RSS reader are also provided
cmdftp(1)
command line File Transfer Protocol client
cookiejar.tcl87(n), cookiejar(n)
Implementation of the Tcl http package cookie jar protocol
dbmail-httpd(8)
speaks the HTTP-1.1 protocol
dbmail-imapd(8)
provides access to the DBMail system to clients supporting Internet Message Access Protocol, IMAP4r1, as specified in RFC 3501
dbmail-lmtpd(8)
receive messages from an MTA supporting the Lightweight Mail Transport Protocol, as specified in RFC 2033
dbmail-pop3d(8)
provides access to the DBMail system to client support- ing Post Office Protocol, POP3, as specified in RFC 1939
dbmail-timsieved(8)
speaks the Manage Sieve draft protocol, used for managing Sieve scripts for a users email account
dhclient(8)
Dynamic Host Configuration Protocol Client
dhcp-options(5)
Dynamic Host Configuration Protocol options
dhcpd(8)
Dynamic Host Configuration Protocol Server
dhcrelay(8)
Dynamic Host Configuration Protocol Relay Agent
dict(1)
DICT Protocol Client
dict_lookup(1)
DICT Protocol Client
dictfmt(1)
formats a DICT protocol dictionary database
dtcpc(8)
Dynamic Tunnel Configuration Protocol client
dtcpclient(8)
Dynamic Tunnel Configuration Protocol client
dtcps(8)
Dynamic Tunnel Configuration Protocol daemon
dxpc(1)
Differential X Protocol Compressor
ffmpeg-protocols(1)
FFmpeg protocols
fido_cbor_info_new(3), fido_cbor_info_free(3), fido_dev_get_cbor_info(3), fido_cbor_info_aaguid_ptr(3), fido_cbor_info_extensions_ptr(3), fido_cbor_info_protocols_ptr(3), fido_cbor_info_versions_ptr(3), fido_cbor_info_options_name_ptr(3), fido_cbor_info_options_value_ptr(3), fido_cbor_info_aaguid_len(3), fido_cbor_info_extensions_len(3), fido_cbor_info_protocols_len(3), fido_cbor_info_versions_len(3), fido_cbor_info_options_len(3), fido_cbor_info_maxmsgsiz(3), fido_cbor_info_maxcredcntlst(3), fido_cbor_info_maxcredidlen(3), fido_cbor_info_fwversion(3)
FIDO 2 CBOR Info API
fido_dev_open(3), fido_dev_close(3), fido_dev_cancel(3), fido_dev_new(3), fido_dev_free(3), fido_dev_force_fido2(3), fido_dev_force_u2f(3), fido_dev_is_fido2(3), fido_dev_supports_credman(3), fido_dev_supports_cred_prot(3), fido_dev_supports_pin(3), fido_dev_has_pin(3), fido_dev_supports_uv(3), fido_dev_has_uv(3), fido_dev_protocol(3), fido_dev_build(3), fido_dev_flags(3), fido_dev_major(3), fido_dev_minor(3)
FIDO 2 device open/close and related functions
flow-receive(1)
Receive flow data with the NetFlow protocol
flow-send(1)
Transmit flow data with the NetFlow protocol
frame(l)
simple message protocol for byte streams
freevrrpd(8)
Virtual Redundancy Router Protocol Daemon
fspd(1), in.fspd(1)
File Service Protocol (FSP) server
ftp-proxy(8)
application level proxy for the FTP protocol
ftpd(8)
DARPA Internet File Transfer Protocol server
ftpd(8)
Internet File Transfer Protocol server
get-edid(1), parse-edid(1)
read-edid tools to retrieve and interpret monitor specifications using the VESA VBE DDC protocol
getaddrinfo(3), getaddrinfo freeaddrinfo(3), gai_strerror(3)
nodename-to-address translation in protocol-independent manner
getnameinfo(3)
address-to-name translation in protocol-independent manner
git-send-pack(1)
Push objects over Git protocol to another repository
gnutls_alpn_get_selected_protocol(3)
API function
gnutls_alpn_set_protocols(3)
API function
gnutls_priority_protocol_list(3)
API function
gnutls_protocol_get_id(3)
API function
gnutls_protocol_get_name(3)
API function
gnutls_protocol_get_version(3)
API function
gnutls_protocol_list(3)
API function
gpsd_json(5)
gpsd request/response protocol
gs-sftp(1)
Secure File Transfer Protocol via Global Socket
gutenfetch_set_active_server(3)
-- This function sets the default Gutenberg server used to satisfy requests. Instead of taking a gutenfetch_server_t * to set the server, it takes a NULL-terminated URL such as "ftp://ibiblio.org/pub/docs/books/gutenberg/". The url should contain a protocol supported by CURL a valid hostname and a directory to the base of the gutenberg texts
helper-mux(8)
Concurrency protocol multiplexer for Squid helpers
hfaxd(8c)
client-server protocol server
http.tcl85(n), http(n)
Client-side implementation of the HTTP/1.1 protocol
http.tcl86(n), http(n)
Client-side implementation of the HTTP/1.1 protocol
http.tcl87(n), http(n)
Client-side implementation of the HTTP/1.1 protocol
http_attach(3)
creates HTTP protocol on top of underlying socket
http_attach_mem(3)
creates HTTP protocol on top of underlying socket
http_detach(3)
terminates HTTP protocol and returns the underlying socket
httpd(8)
Apache Hypertext Transfer Protocol Server
iked(8)
Internet Key Exchange protocol daemon
imapd(8), IMAPd(8)
Internet Message Access Protocol server
ipopd(8), IPOPd(8)
Post Office Protocol server
ippfind(1)
find internet printing protocol printers
ipsvd(7)
Internet protocol service daemon
kripp(1)
is a network passwords sniffer. Its name is an acronym for "kripp is rest in peace, privacy". Supported protocols are icq, aim, pop3, ftp, http and cvs
ktelnet(1), telnet(1)
user interface to the TELNET protocol
ktelnetd(8), telnetd(8)
DARPA TELNET protocol server
l2tpd(8)
Layer 2 Tunnelling Protocol Daemon
ldap(3)
OpenLDAP Lightweight Directory Access Protocol API
ldap_perror(3), ld_errno(3), ldap_result2error(3), ldap_errlist(3), ldap_err2string(3)
LDAP protocol error handling routines
ldns_rr_dnskey_flags(3), ldns_rr_dnskey_set_flags(3), ldns_rr_dnskey_protocol(3), ldns_rr_dnskey_set_protocol(3), ldns_rr_dnskey_algorithm(3), ldns_rr_dnskey_set_algorithm(3), ldns_rr_dnskey_key(3), ldns_rr_dnskey_set_key(3)
get and set DNSKEY RR rdata fields
lft(8)
display the route packets take to a network host/socket using one of several layer-4 protocols and methods; optionally show heuristic network information in transitu
libnutclient_tcp(3), nutclient_tcp_create_client(3), nutclient_tcp_is_connected(3), nutclient_tcp_disconnect(3), nutclient_tcp_reconnect(3), nutclient_tcp_set_timeout(3), nutclient_tcp_get_timeout(3)
TCP protocol related function for Network UPS Tools high-level client access library
libowfat_fmt_httpdate(3), fmt_httpdate(3)
write a date in ASCII as in the HTTP protocol
librtmp(3)
RTMPDump Real-Time Messaging Protocol API
libssh2_banner_set(3)
set the SSH protocol banner for the local client
libssh2_session_banner_set(3)
set the SSH protocol banner for the local client
liebert-esp2(8)
Driver for Liebert UPS, using the ESP-II serial protocol
lightning-dev-sendcustommsg(7)
Low-level interface to send protocol messages to peers
lldpd(8)
Send Link Layer Discovery Protocol packets over ethernet
lscp(1)
the LinuxSampler Control Protocol (LSCP) shell
mdpop3d(8), in.mdpop3d(8)
Post Office Protocol version 3 daemon for Maildirs
mesgd(8)
message send protocol daemon
mge-shut(8)
Driver for SHUT Protocol UPS equipment
mge-utalk(8)
Driver for MGE UPS SYSTEMS UTalk protocol equipment
milter-test-client(1)
milter side milter protocol implemented program
milter-test-server(1)
MTA side milter protocol implemented program
mimedefang-protocol(7)
Conventions used by mimedefang(8) to communicate with filter programs
modbus_new_tcp_pi(3)
create a libmodbus context for TCP Protocol Independent
nanomsg(7)
scalability protocols library
nbdkit(1)
which parts of the NBD protocol nbdkit supports
ncftp(1)
Browser program for the File Transfer Protocol
ndpmon(8)
Neighbor Discovery Protocol Monitor
netxml-ups(8)
Driver for Eaton / MGE Network Management Card / Proxy (XML/HTTP Protocol) equipment
nn_bus(7)
message bus scalability protocol
nn_pair(7)
one-to-one scalability protocol
nn_pipeline(7)
scalability protocol for passing tasks through a series of processing steps
nn_pubsub(7)
publish/subscribe scalability protocol
nn_reqrep(7)
request/reply scalability protocol
nn_survey(7)
survey scalability protocol
nntpd(8)
Network News Transfer Protocol server
nntpd(8c)
Network News Transfer Protocol server
ntp.conf(5)
Network Time Protocol (NTP) daemon configuration file format
ntpctl(8)
control the Network Time Protocol daemon
ntpd(8)
Network Time Protocol daemon
ntpd.conf(5)
Network Time Protocol daemon configuration file
nutdrv_qx(8)
Driver for Q* protocol serial and USB based UPS equipment
olsrd(8)
Optimized Link State Routing protocol daemon
openconnect(8)
Multi-protocol VPN client, for Cisco AnyConnect VPNs and others
openrsync(5)
rsync wire protocol
openrsyncd(5)
rsyncd wire protocol
openssl-cmp(1ossl)
Certificate Management Protocol (CMP, RFC 4210) application
openssl-ocsp(1), ocsp(1)
Online Certificate Status Protocol utility
openssl-ocsp(1ossl)
Online Certificate Status Protocol command
ovs-fields(7)
protocol header fields in OpenFlow and Open vSwitch
ownet(1), ownet (1), (libownet)(1)
easy C-language 1-wire interface to the owserver protocol
owtap(1)
Packet sniffer for the owserver protocol
parrot-prove(1)
Prove is a PIR-based TAP (Test Anything Protocol) Harness
pcap_set_protocol_linux(3)
set capture protocol for a not-yet-activated capture handle
pen(1)
Load balancer for udp and tcp based protocols
pmapfilter(3)
User-defined labels for IPs and protocol/port pairs
polyglot(6), PolyGlot(6)
Winboard protocol to UCI protocol adapter - book engine for Polyglot books - a collection of utilities for creating and analyzing opening books - a utility for analyzing epd files - a perft counter
popa3d(8)
Post Office Protocol (POP3) server
powwow(6)
telnet protocol client for MUD playing
prefix_attach(3)
creates PREFIX protocol on top of underlying socket
prefix_attach_mem(3)
creates PREFIX protocol on top of underlying socket
prefix_detach(3)
terminates PREFIX protocol and returns the underlying socket
proftpd(8)
Professional configurable, secure file transfer protocol server
protocols.cfg(5)
Configuration of TCP network services
psftp(1)
interactive SFTP (secure file transfer protocol) client
psm-ipp(5)
Internet Print Protocol Print Service Module
ptpd2(8)
Precision Time Protocol daemon (1588-2008)
ptpd2.conf(5)
Precision Time Protocol daemon config file
pure-ftpd(8)
simple File Transfer Protocol server
qemu-ga-ref(7)
QEMU Guest Agent Protocol Reference
radsniff(8)
dump radius protocol
rdesktop(1)
Remote Desktop Protocol client
rep-remote(1)
provides a protocol for executing all of librep's file operations on that host
riello_ser(8)
Driver for Riello UPS Protocol UPS equipment
riello_usb(8)
Driver for Riello UPS Protocol UPS equipment via USB
rpp(3), rpp_open(3), rpp_bind(3), rpp_poll(3), rpp_io(3), rpp_read(3), rpp_write(3), rpp_close(3), rpp_getaddr(3), rpp_flush(3), rpp_terminate(3), rpp_shutdown(3), rpp_rcommit(3), rpp_wcommit(3), rpp_eom(3), rpp_getc(3), rpp_putc(3)
reliable packet protocol
rtpproxy(8)
RTP (Real-time Transport Protocol) Proxy Server
rwstats(1)
Print top-N or bottom-N lists or summarize data by protocol
smp_utils(8), smp_*(8)
invoke a SAS Serial Management Protocol (SMP) function
smtp(1)
Simple Mail Transfer Protocol client
smtpctl(8), mailq(8)
control the Simple Mail Transfer Protocol daemon
smtpd.conf(5)
Simple Mail Transfer Protocol daemon configuration file
sntp(8)
standard Simple Network Time Protocol client program
squidclamav(1), SquidClamav(1)
HTTP Antivirus for Squid based on ClamAv and the ICAP protocol
srelay(8)
socks protocol server
sslh(8), sslh(8)
protocol demultiplexer
sudo_logsrv.proto(5)
Sudo log server protocol
suffix_attach(3)
creates SUFFIX protocol on top of underlying socket
suffix_attach_mem(3)
creates SUFFIX protocol on top of underlying socket
suffix_detach(3)
terminates SUFFIX protocol and returns the underlying socket
sup(1)
software upgrade protocol
sway-ipc(7)
IPC protocol for sway
swaybar-protocol(7)
JSON status line protocol for swaybar
sxpc(1), The(1)
Simple X Protocol Compressor
synergyc(1)
manual page for synergyc 1.11.0-stable, protocol version 1.6
synergys(1)
manual page for synergys 1.11.0-stable, protocol version 1.6
tap(3)
write tests that implement the Test Anything Protocol
tcp_table(5)
Postfix client/server table lookup protocol
tcpcryptd(8)
Implement the tcpcrypt protocol by transparently modifying network I/O
tentacle_client(1)
a client file transfer protocol
tentacle_server(1)
a server file transfer protocol
term_attach(3)
creates TERM protocol on top of underlying socket
term_attach_mem(3)
creates TERM protocol on top of underlying socket
term_detach(3)
cleanly terminates the protocol
tftp(1)
IPv4 Trivial File Transfer Protocol client
tftpd(8)
Trivial File Transfer Protocol server
tls_attach_client(3)
creates TLS protocol on top of underlying socket
tls_attach_client_mem(3)
creates TLS protocol on top of underlying socket
tls_attach_server(3)
creates TLS protocol on top of underlying socket
tls_attach_server_mem(3)
creates TLS protocol on top of underlying socket
tls_config_set_protocols(3), tls_config_parse_protocols(3), tls_config_set_alpn(3), tls_config_set_ciphers(3), tls_config_set_dheparams(3), tls_config_set_ecdhecurves(3), tls_config_prefer_ciphers_client(3), tls_config_prefer_ciphers_server(3)
TLS protocol and cipher selection
tls_detach(3)
terminates TLS protocol and returns the underlying socket
tls_done(3)
half-closes a TLS protocol
tn5250(1)
an implementation of the 5250 telnet protocol
tnftpd(8)
Internet File Transfer Protocol server
tsung(1)
A distributed multi-protocol load testing tool
utftpd(8)
a trivial file transfer protocol (TFTP) server
vde_over_ns(1)
Steganographic cable over NS protocol for Virtual Distributed Ethernet
ws_attach_client(3)
creates WebSocket protocol on the top of underlying socket
ws_attach_client_mem(3)
creates WebSocket protocol on the top of underlying socket
ws_attach_server(3)
creates WebSocket protocol on the top of underlying socket
ws_attach_server_mem(3)
creates WebSocket protocol on the top of underlying socket
ws_detach(3)
terminates WebSocket protocol and returns the underlying socket
xmx(1), xmx (1)
an X protocol multiplexor
xrdp(8)
a Remote Desktop Protocol (RDP) server
xrdpwdadmin(8)
administer pwd security protocol passwords
xs_pgm(7)
reliable multicast transport via PGM protocol
xscope(1)
X Window Protocol Viewer
zpool_influxdb(8)
collect ZFS pool statistics in InfluxDB line protocol format
0intro(9p), intro(9p)
introduction to the Plan 9 File Protocol, 9P
AnyEvent::IRC(3)
An event based IRC protocol client API
AnyEvent::IRC::Util(3)
Common utilities that help with IRC protocol handling
AnyEvent::Redis::Protocol(3)
Redis response parser (read handler) for AnyEvent
AnyEvent::XMPP(3)
An implementation of the XMPP Protocol
Bio::Das::HTTP::Fetch(3)
Manage the HTTP protocol for DAS transactions
Bio::Das::Lite(3)
Perl extension for the DAS (HTTP+XML) Protocol (http://biodas.org/)
Bio::MAGETAB::Protocol(3)
MAGE-TAB protocol class
Bio::MAGETAB::ProtocolApplication(3)
MAGE-TAB protocol application class
Bio::MAGETAB::ProtocolParameter(3)
MAGE-TAB protocol parameter class
Bio::WebAgent(3)
A base class for Web (any protocol) access
CDDB(3), CDDB.pm(3)
a high-level interface to cddb protocol servers (freedb and CDDB)
CGI::PSGI(3)
Adapt CGI.pm to the PSGI protocol
Catalyst::Plugin::Server(3)
Base Server plugin for RPC-able protocols
Class::MOP(3)
A Meta Object Protocol for Perl 5
Crypt::Chimera(3)
An implementation of the Chimera key exchange protocol
Crypt::Dining(3)
The Dining Cryptographers' Protocol
Crypt::LibSCEP(3)
Perl extension for libscep, a C implementation of the SCEP protocol
Crypt::OICQ(3)
cryptographic algorithm used by OICQ protocol
Cyrus::SIEVE::managesieve(3)
Perl client for the SIEVE protocol
Dancer::RPCPlugin::ErrorResponse(3)
Interface to pass error-responses without knowlage of the protocol
Data::Model::Driver::Cache::Memcached(3)
Penetration cache is offered to the basic driver by memcached protocol
Data::Model::Driver::Memcached(3)
storage driver for memcached protocol
DtDndProtocol(4)
drag and drop matching and transfer protocols
Email::FolderType::Net(3)
Recognize folder types for network based message protocols
Event::RPC::Message(3)
Implementation of Event::RPC network protocol
FCGI::Client(3)
client library for fastcgi protocol
Firefox::Marionette(3)
Automate the Firefox browser with the Marionette protocol
Firefox::Marionette::Capabilities(3)
Represents Firefox Capabilities retrieved using the Marionette protocol
Firefox::Marionette::Cookie(3)
Represents a Firefox cookie retrieved using the Marionette protocol
Firefox::Marionette::Element(3)
Represents a Firefox element retrieved using the Marionette protocol
Firefox::Marionette::Proxy(3)
Represents a Proxy used by Firefox Capabilities using the Marionette protocol
Firefox::Marionette::Response(3)
Represents a Marionette protocol response
GPS::Garmin(3)
Perl interface to GPS equipment using the Garmin Protocol
GPS::NMEA(3)
Perl interface to GPS equipment using the NMEA Protocol
Google::ProtocolBuffers(3)
simple interface to Google Protocol Buffers
Growl::GNTP(3)
Perl implementation of GNTP Protocol (Client Part)
HTTP::MHTTP(3)
this library provides reasonably low level access to the HTTP protocol, for perl. This does not replace LWP (what possibly could :-) but is a cut for speed. It also supports all of HTTP 1.0, so you have GET, POST, PUT, HEAD, and DELETE. Some support of HTTP 1.1 is available - sepcifically Transfer-Encoding = chunked and the Keep-Alive extensions. Additionally - rudimentary SSL support can be compiled in. This effectively enables negotiation of TLS, but does not validate the certificates
HTTP::Server::Simple::CGI::Environment(3)
a HTTP::Server::Simple mixin to provide the CGI protocol
IO::Async::Protocol(3), "IO::Async::Protocol"(3)
base class for transport-based protocols
IO::Async::Protocol::LineStream(3), "IO::Async::Protocol::LineStream"(3)
stream-based protocols using lines of text
IO::Async::Protocol::Stream(3), "IO::Async::Protocol::Stream"(3)
base class for stream-based protocols
IPC::DirQueue::IndexClient(3)
client for the indexd protocol
Iodef::Pb::Format(3), Iodef::Pb(3)
Perl extension for formatting an array of IODEFDocumentType (IODEF protocol buffer objects) messages into things like tab-delmited tables, csv and snort rules
JSON::RPC(3)
Perl implementation of JSON-RPC 1.1 protocol
JSONRPC(3), JSONRPC(3)
Perl implementation of JSON-RPC protocol
Kafka::Int64(3)
Functions to work with 64 bit elements of the protocol on 32 bit systems
Kafka::Protocol(3)
Functions to process messages in the Apache Kafka protocol
LWP::Parallel::Protocol(3)
Base class for parallel LWP protocols
LWP::Protocol(3)
Base class for LWP protocols
LWP::Protocol::PSGI(3)
Override LWP's HTTP/HTTPS backend with your own PSGI application
LWP::Protocol::connect(3)
Provides HTTP/CONNECT proxy support for LWP::UserAgent
LWP::Protocol::http10(3)
Legacy HTTP/1.0 support for LWP
LWP::Protocol::https(3)
Provide https support for LWP::UserAgent
LWP::Protocol::ldap(3)
Provide LDAP support for LWP::UserAgent
LWP::Protocol::ldapi(3)
Provide LDAPI support for LWP::UserAgent
LWP::Protocol::ldaps(3)
Provide LDAPS support for LWP::UserAgent
LWP::Protocol::socks(3)
adds support for the socks protocol and proxy facility
MR::IProto(3)
iproto network protocol client
Mail::Server::IMAP4::Fetch(3)
message info for IMAP protocol speed-up
Mail::SpamAssassin::Client(3)
Client for spamd Protocol
Mango::Protocol(3)
The MongoDB wire protocol
MogileFS::Worker::Query(3)
-- implements the MogileFS client protocol
Mojo::WebSocket(3)
The WebSocket protocol
Mon::Protocol(3)
Methods for parsing / dumping a protocol block
Moose::Cookbook::Basics::HTTP_SubtypesAndCoercion(3)
Demonstrates subtypes and coercion use HTTP-related classes (Request, Protocol, etc.)
Music::Audioscrobbler::Submit(3)
Module providing routines to submit songs to last.fm using 1.2 protocol
Net::ACME2(3)
Client logic for the ACME (Let's Encrypt) protocol Xref "Lets Encrypt Let's Encrypt letsencrypt"
Net::AMQP(3)
Advanced Message Queue Protocol (de)serialization and representation
Net::AMQP::Protocol(3)
Loading code of the AMQP spec
Net::AMQP::Protocol::Base(3)
Base class of auto-generated protocol classes
Net::AMQP::Protocol::v0_8(3)
AMQP v0.8 (de)serialization and representation
Net::AOLIM(3)
Object-Oriented interface to the AOL Instant Messenger TOC client protocol
Net::Async::HTTP::Connection(3), "Net::Async::HTTP::Connection"(3)
HTTP client protocol handler
Net::Async::XMPP(3)
asynchronous XMPP client based on Protocol::XMPP and IO::Async::Protocol::Stream
Net::Async::XMPP::Client(3)
asynchronous XMPP client based on Protocol::XMPP and IO::Async::Protocol::Stream
Net::Async::XMPP::Protocol(3)
common protocol support for Net::Async::XMPP
Net::Async::XMPP::Server(3)
asynchronous XMPP server based on Protocol::XMPP and IO::Async::Protocol::Stream
Net::BGP(3)
Border Gateway Protocol version 4 speaker/listener library
Net::BitTorrent(3)
BitTorrent peer-to-peer protocol class
Net::BitTorrent::Protocol(3)
Packet utilities for the BitTorrent protocol
Net::CUPS::IPP(3)
Internet Printing Protocol Object
Net::Connection::Match::Protos(3)
Runs a protocol check against a Net::Connection object
Net::Connection::Sort::proto(3)
Sorts the connections via the connection protocol
Net::DNS::Packet(3)
DNS protocol packet
Net::DRI::Protocol(3)
Superclass of all Net::DRI Protocols
Net::DRI::Protocol::AFNIC::Email(3)
AFNIC Email Protocol for Net::DRI
Net::DRI::Protocol::AFNIC::Email::Domain(3)
AFNIC Email Domain commands for Net::DRI
Net::DRI::Protocol::AFNIC::Email::Message(3)
AFNIC Email Message for Net::DRI
Net::DRI::Protocol::AFNIC::WS(3)
AFNIC Web Services Protocol for Net::DRI
Net::DRI::Protocol::AFNIC::WS::Domain(3)
AFNIC Web Services Domain commands for Net::DRI
Net::DRI::Protocol::AFNIC::WS::Message(3)
AFNIC Web Services Message for Net::DRI
Net::DRI::Protocol::AdamsNames::WS(3)
AdamsNames Web Services Protocol for Net::DRI
Net::DRI::Protocol::AdamsNames::WS::Connection(3)
AdamsNames Web Services Connection handling for Net::DRI
Net::DRI::Protocol::AdamsNames::WS::Domain(3)
AdamsNames Web Services Domain commands for Net::DRI
Net::DRI::Protocol::AdamsNames::WS::Message(3)
AdamsNames Web Services Message for Net::DRI
Net::DRI::Protocol::BookMyName::WS(3)
BookMyName (aka Free/ProXad/Online/Dedibox/Iliad) Web Services Protocol for Net::DRI
Net::DRI::Protocol::BookMyName::WS::Account(3)
BookMyName Web Services Account commands for Net::DRI
Net::DRI::Protocol::BookMyName::WS::Domain(3)
BookMyName Web Services Domain commands for Net::DRI
Net::DRI::Protocol::BookMyName::WS::Message(3)
BookMyName Web Services Message for Net::DRI
Net::DRI::Protocol::DAS(3)
DAS Protocol (.BE & .EU Domain Availability Service) for Net::DRI
Net::DRI::Protocol::DAS::AU(3)
.AU DAS Protocol (Domain Availability Service) for Net::DRI
Net::DRI::Protocol::DAS::AU::Connection(3)
.AU DAS Connection handling for Net::DRI
Net::DRI::Protocol::DAS::AU::Domain(3)
.AU DAS Domain commands for Net::DRI
Net::DRI::Protocol::DAS::AU::Message(3)
.AU DAS Message for Net::DRI
Net::DRI::Protocol::DAS::AdamsNames(3)
AdamsNames DAS Protocol (Domain Availability Service) for Net::DRI
Net::DRI::Protocol::DAS::AdamsNames::Connection(3)
AdamsNames DAS Connection handling for Net::DRI
Net::DRI::Protocol::DAS::AdamsNames::Domain(3)
AdamsNames DAS Domain commands for Net::DRI
Net::DRI::Protocol::DAS::AdamsNames::Message(3)
AdamsNames DAS Message for Net::DRI
Net::DRI::Protocol::DAS::Connection(3)
DAS Connection handling for Net::DRI
Net::DRI::Protocol::DAS::Domain(3)
DAS Domain commands for Net::DRI
Net::DRI::Protocol::DAS::Message(3)
DAS Message for Net::DRI
Net::DRI::Protocol::DAS::SIDN(3)
.NL DAS Protocol (Domain Availability Service) for Net::DRI
Net::DRI::Protocol::DAS::SIDN::Connection(3)
.NL DAS Connection handling for Net::DRI
Net::DRI::Protocol::DAS::SIDN::Domain(3)
.NL DAS Domain commands for Net::DRI
Net::DRI::Protocol::DAS::SIDN::Message(3)
.NL DAS Message for Net::DRI
Net::DRI::Protocol::EPP(3)
EPP Protocol (STD 69 aka RFC 5730,5731,5732,5733,5734 obsoleting RFC 3730,3731,3732,3733,3734 and RFC 3735) for Net::DRI
Net::DRI::Protocol::EPP::Connection(3)
EPP over TCP/TLS Connection Handling (RFC4934) for Net::DRI
Net::DRI::Protocol::EPP::Core::Contact(3)
EPP Contact commands (RFC4933 obsoleting RFC3733) for Net::DRI
Net::DRI::Protocol::EPP::Core::Domain(3)
EPP Domain commands (RFC4931 obsoleting RFC3731) for Net::DRI
Net::DRI::Protocol::EPP::Core::Host(3)
EPP Host commands (RFC4932 obsoleting RFC3732) for Net::DRI
Net::DRI::Protocol::EPP::Core::RegistryMessage(3)
EPP Registry messages commands (RFC4930 obsoleting RFC3730) for Net::DRI
Net::DRI::Protocol::EPP::Core::Session(3)
EPP Session commands (RFC4930 obsoleting RFC3730) for Net::DRI
Net::DRI::Protocol::EPP::Core::Status(3)
EPP Status for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AERO(3)
.AERO EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AERO::Contact(3)
.AERO EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AERO::Domain(3)
.AERO EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AFNIC(3)
AFNIC (.FR/.RE) EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AFNIC::Contact(3)
AFNIC (.FR/.RE) EPP Contact extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AFNIC::Domain(3)
AFNIC (.FR/.RE) EPP Domain extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AFNIC::Notifications(3)
AFNIC (.FR/.RE) EPP Notifications for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AFNIC::Status(3)
AFNIC (.FR/.RE) EPP Status for Net::DRI
Net::DRI::Protocol::EPP::Extensions::ARNES(3)
ARNES (.SI) EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::ARNES::Contact(3)
ARNES (.SI) EPP Contact extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::ARNES::Domain(3)
ARNES (.SI) EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::ASIA(3)
ASIA EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::ASIA::CED(3)
.ASIA EPP CED extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::ASIA::IPR(3)
.ASIA EPP IPR extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AT(3)
.AT EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AT::ATResult(3)
NIC.AT Result Condition EPP Mapping for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AT::Contact(3)
NIC.AT Contact Extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AT::Domain(3)
NIC.AT EPP Domain extension for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AT::IOptions(3)
ENUM.AT Options EPP Mapping for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AT::Message(3)
NIC.AT Message EPP Mapping for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AT::Result(3)
ENUM.AT Result Condition EPP Mapping for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AU(3)
.AU EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::AU::Domain(3)
.AU EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Afilias(3)
Afilias (.ORG & various ccTLDs) EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Afilias::IDNLanguage(3)
Afilias EPP IDN Language commands (EPP-IDN-Lang-Mapping.pdf) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Afilias::Restore(3)
EPP renew redemption period support for Net::DRI
Net::DRI::Protocol::EPP::Extensions::BR(3)
.BR EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::BR::Contact(3)
.BR EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::BR::Domain(3)
.BR EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CAT(3)
.CAT EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CAT::Contact(3)
.CAT EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CAT::DefensiveRegistration(3)
.CAT EPP Defensive Registration extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CAT::Domain(3)
.CAT EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CIRA(3)
CIRA (.CA) EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CIRA::Agreement(3)
CIRA EPP Agreement commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CIRA::Contact(3)
CIRA EPP Contact commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CIRA::Domain(3)
CIRA (.CA) EPP Domain extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CIRA::Notifications(3)
CIRA (.CA) EPP Notifications for Net::DRI
Net::DRI::Protocol::EPP::Extensions::COOP(3)
.COOP EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::COOP::Contact(3)
.COOP EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CZ(3)
.CZ EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CZ::Contact(3)
.CZ EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CZ::Domain(3)
.CZ Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CZ::NSSET(3)
.CZ NSSET extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CentralNic(3)
CentralNic EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CentralNic::Release(3)
EPP Release CentralNic extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CentralNic::TTL(3)
EPP DNS TTL CentralNic extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::CentralNic::WebForwarding(3)
EPP WebForwarding CentralNic extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::DNSBE(3)
DNSBE (.BE) EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::DNSBE::Contact(3)
DNSBE EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::DNSBE::Domain(3)
DNSBE EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::DNSBE::Message(3)
DNSBE EPP Message for Net::DRI
Net::DRI::Protocol::EPP::Extensions::E164(3)
EPP E.164 Number Mapping (RFC4114) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::E164Validation(3)
EPP E.164 Validation (RFC5076) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::E164Validation::RFC5076(3)
EPP E.164 Validation Information Example from RFC5076 for Net::DRI
Net::DRI::Protocol::EPP::Extensions::EURid(3)
EURid (.EU) EPP extensions (release 5.6) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::EURid::Contact(3)
EURid EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::EURid::Domain(3)
EURid EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::EURid::Message(3)
EPP EURid Message for Net::DRI
Net::DRI::Protocol::EPP::Extensions::EURid::Notifications(3)
EURid EPP Notifications Handling for Net::DRI
Net::DRI::Protocol::EPP::Extensions::EURid::Registrar(3)
EURid EPP Registrar extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::EURid::Sunrise(3)
EURid Sunrise EPP extension for Net::DRI
Net::DRI::Protocol::EPP::Extensions::FCCN(3)
FCCN (.PT) EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::FCCN::Contact(3)
FCCN (.PT) EPP Contact extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::FCCN::Domain(3)
FCCN (.PT) EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::GracePeriod(3)
EPP Grace Period commands (RFC3915) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::HTTP(3)
EPP over HTTP/HTTPS connection handling for Net::DRI
Net::DRI::Protocol::EPP::Extensions::IENUMAT(3)
Infrastructure ENUM .AT EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::IRegistry(3)
.CO.CZ EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::IT(3)
.IT EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::IT::Contact(3)
.IT EPP Contact extension for Net::DRI
Net::DRI::Protocol::EPP::Extensions::IT::Domain(3)
.IT EPP Domain extension for Net::DRI
Net::DRI::Protocol::EPP::Extensions::IT::Notifications(3)
.IT EPP Notifications Parsing for Net::DRI
Net::DRI::Protocol::EPP::Extensions::LU(3)
DNSLU EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::LU::Contact(3)
.LU EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::LU::Domain(3)
.LU EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::LU::Poll(3)
EPP DNS-LU Poll extensions (DocRegistrar-2.0.6.pdf pages 35-37) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::LU::Status(3)
EPP .LU Status for Net::DRI
Net::DRI::Protocol::EPP::Extensions::MOBI(3)
.MOBI EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::MOBI::Domain(3)
.MOBI EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NAME(3)
.NAME EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NAME::EmailFwd(3)
EPP EmailFwd extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NO(3)
.NO EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NO::Contact(3)
.NO Contact Extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NO::Domain(3)
.NO EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NO::Host(3)
.NO Host Extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NO::Message(3)
.NO Mesage Extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NO::Result(3)
.NO Result Condition EPP Mapping for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NSgroup(3)
EPP NSgroup extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NeuLevel::IDNLanguage(3)
NeuLevel EPP IDN Language Commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::NeuLevel::UIN(3)
EPP Extension for .TRAVEL UIN for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Nominet(3)
.UK EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Nominet::Account(3)
.UK EPP Account commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Nominet::Contact(3)
.UK EPP Contact commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Nominet::Domain(3)
.UK EPP Domain commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Nominet::Host(3)
.UK EPP Host commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::Nominet::Notifications(3)
.UK EPP Notifications for Net::DRI
Net::DRI::Protocol::EPP::Extensions::PL(3)
.PL EPP extensions (draft-zygmuntowicz-epp-pltld-03) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::PL::Contact(3)
.PL EPP Contact extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::PL::Domain(3)
.PL EPP Domain extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::PL::Message(3)
.PL EPP Message extension commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::PRO(3)
.PRO EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::PRO::AV(3)
.PRO EPP A/V extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::PRO::Domain(3)
.PRO EPP domain extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SE(3)
.SE EPP Extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SE::Extensions(3)
.SE EPP Domain/Contact Extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SE::Message(3)
.SE EPP Message for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SIDN(3)
SIDN (.NL) EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SIDN::Contact(3)
SIDN EPP Contact commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SIDN::Domain(3)
SIDN (.NL) EPP Domain extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SIDN::Host(3)
SIDN EPP Host commands for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SIDN::Message(3)
EPP SIDN Message for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SIDN::Notifications(3)
SIDN (.NL) EPP Notifications for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SWITCH(3)
.CH/.LI EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::SecDNS(3)
EPP DNS Security Extensions (RFC4310) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::US(3)
.US EPP extensions (draft-liu-epp-usTLD-00) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::US::Contact(3)
.US EPP Contact NEXUS Extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign(3)
VeriSign EPP extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign::IDNLanguage(3)
EPP IDN Language commands (EPP-IDN-Lang-Mapping.pdf) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign::JobsContact(3)
.JOBS EPP contact extensions for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign::NameStore(3)
VeriSign EPP NameStore Extension for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign::PollLowBalance(3)
EPP Low Balance Mapping (EPP-LowBalance-Mapping.pdf) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign::PollRGP(3)
EPP RGP Poll Mapping (EPP-RGP-Poll-Mapping.pdf) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign::Sync(3)
EPP Sync commands (draft-hollenbeck-epp-sync-01) for Net::DRI
Net::DRI::Protocol::EPP::Extensions::VeriSign::WhoisInfo(3)
EPP Whois Info (EPP-Whois-Info-Ext.pdf) for Net::DRI
Net::DRI::Protocol::EPP::Message(3)
EPP Message for Net::DRI
Net::DRI::Protocol::EPP::Util(3)
EPP Protocol Utility functions for Net::DRI
Net::DRI::Protocol::Gandi::WS(3)
Gandi Web Services Protocol for Net::DRI
Net::DRI::Protocol::Gandi::WS::Account(3)
Gandi Web Services Account commands for Net::DRI
Net::DRI::Protocol::Gandi::WS::Connection(3)
Gandi Web Services Connection handling for Net::DRI
Net::DRI::Protocol::Gandi::WS::Domain(3)
Gandi Web Services Domain commands for Net::DRI
Net::DRI::Protocol::Gandi::WS::Message(3)
Gandi Web Services Message for Net::DRI
Net::DRI::Protocol::IRIS(3)
IRIS Protocols (RFC 3981,3982,3983,4414,4698,4991,4992,4993,5144) for Net::DRI
Net::DRI::Protocol::IRIS::Core(3)
IRIS Core (RFC3981) functions for Net::DRI
Net::DRI::Protocol::IRIS::DCHK::Domain(3)
IRIS DCHK (RFC5144) Domain Commands for Net::DRI
Net::DRI::Protocol::IRIS::DCHK::Status(3)
IRIS DCHK Domain Status for Net::DRI
Net::DRI::Protocol::IRIS::LWZ(3)
IRIS LWZ connection handling (RFC4993) for Net::DRI
Net::DRI::Protocol::IRIS::Message(3)
IRIS Message for Net::DRI
Net::DRI::Protocol::IRIS::XCP(3)
IRIS XCP Connection Handling (RFC4992) for Net::DRI
Net::DRI::Protocol::Message(3)
Superclass of all protocol messages in Net::DRI
Net::DRI::Protocol::OVH::WS(3)
OVH Web Services Protocol for Net::DRI
Net::DRI::Protocol::OVH::WS::Account(3)
OVH Web Services Account commands for Net::DRI
Net::DRI::Protocol::OVH::WS::Connection(3)
OVH Web Services Connection handling for Net::DRI
Net::DRI::Protocol::OVH::WS::Domain(3)
OVH Web Services Domain commands for Net::DRI
Net::DRI::Protocol::OVH::WS::Message(3)
OVH Web Services Message for Net::DRI
Net::DRI::Protocol::OpenSRS::XCP(3)
OpenSRS XCP Protocol for Net::DRI
Net::DRI::Protocol::OpenSRS::XCP::Account(3)
OpenSRS XCP Account commands for Net::DRI
Net::DRI::Protocol::OpenSRS::XCP::Connection(3)
OpenSRS XCP Connection handling for Net::DRI
Net::DRI::Protocol::OpenSRS::XCP::Domain(3)
OpenSRS XCP Domain commands for Net::DRI
Net::DRI::Protocol::OpenSRS::XCP::Message(3)
OpenSRS XCP Message for Net::DRI
Net::DRI::Protocol::OpenSRS::XCP::Session(3)
OpenSRS XCP Session commands for Net::DRI
Net::DRI::Protocol::RRI(3)
RRI Protocol (DENIC-11) for Net::DRI
Net::DRI::Protocol::RRI::Connection(3)
RRI Connection handling (DENIC-11) for Net::DRI
Net::DRI::Protocol::RRI::Contact(3)
RRI Contact commands (DENIC-11) for Net::DRI
Net::DRI::Protocol::RRI::Domain(3)
RRI Domain commands (DENIC-11) for Net::DRI
Net::DRI::Protocol::RRI::Message(3)
RRI Message for Net::DRI
Net::DRI::Protocol::RRI::RegistryMessage(3)
RRI Registry messages commands (DENIC-11) for Net::DRI
Net::DRI::Protocol::RRI::Session(3)
RRI Session commands (DENIC-11) for Net::DRI
Net::DRI::Protocol::RRP(3)
RRP 1.1/2.0 Protocol for Net::DRI
Net::DRI::Protocol::RRP::Connection(3)
RRP Connection handling for Net::DRI
Net::DRI::Protocol::RRP::Core::Domain(3)
RRP Domain commands for Net::DRI
Net::DRI::Protocol::RRP::Core::Host(3)
RRP Host commands for Net::DRI
Net::DRI::Protocol::RRP::Core::Session(3)
RRP Session commands for Net::DRI
Net::DRI::Protocol::RRP::Core::Status(3)
RRP Status for Net::DRI
Net::DRI::Protocol::RRP::Message(3)
RRP Message for Net::DRI
Net::DRI::Protocol::ResultStatus(3)
Encapsulate Details of an Operation Result (with Standardization on EPP) for Net::DRI
Net::DRI::Protocol::Whois(3)
Whois Protocol (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Connection(3)
Whois Connection handling for Net::DRI
Net::DRI::Protocol::Whois::Domain::AERO(3)
.AERO Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::AT(3)
.AT Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::BIZ(3)
.BIZ Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::CAT(3)
.CAT Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::COM(3)
.COM/.NET Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::EU(3)
.EU Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::INFO(3)
.INFO Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::LU(3)
.LU Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::MOBI(3)
.MOBI Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::NAME(3)
.NAME Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::ORG(3)
.ORG Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::PT(3)
.PT Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::SE(3)
.SE Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::TRAVEL(3)
.TRAVEL Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::US(3)
.US Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::WS(3)
.WS Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Domain::common(3)
Whois commands (RFC3912) for Net::DRI
Net::DRI::Protocol::Whois::Message(3)
Whois Message for Net::DRI
Net::DirectConnect(3)
Perl Direct Connect protocol implementation
Net::EPP(3), "Net::EPP"(3)
a Perl library for the Extensible Provisioning Protocol (EPP)
Net::EPP::Client(3)
a client library for the TCP transport for EPP, the Extensible Provisioning Protocol
Net::EPP::Protocol(3)
Low-level functions useful for both EPP clients and servers
Net::EPP::Proxy(3)
a proxy server for the EPP protocol
Net::FastCGI::Constant(3)
FastCGI protocol constants
Net::FastCGI::Protocol(3)
Provides functions to build and parse FastCGI messages
Net::Frame::Layer::ARP(3)
Address Resolution Protocol layer object
Net::Frame::Layer::ICMPv6(3)
Internet Control Message Protocol v6 layer object
Net::Frame::Layer::IPv4(3)
Internet Protocol v4 layer object
Net::Frame::Layer::IPv6(3)
Internet Protocol v6 layer object
Net::Frame::Layer::IPv6::Destination(3)
Internet Protocol v6 Destination Extension Header layer object
Net::Frame::Layer::IPv6::Fragment(3)
Internet Protocol v6 Fragment Extension Header layer object
Net::Frame::Layer::IPv6::HopByHop(3)
Internet Protocol v6 Hop-By-Hop Extension Header layer object
Net::Frame::Layer::IPv6::Routing(3)
Internet Protocol v6 Routing Extension Header layer object
Net::Frame::Layer::PPP(3)
Point-to-Point Protocol layer object
Net::Frame::Layer::TCP(3)
Transmission Control Protocol layer object
Net::Frame::Layer::UDP(3)
User Datagram Protocol layer object
Net::GPSD3(3)
Interface to the gpsd server daemon protocol versions 3 (JSON)
Net::GrowlClient(3)
Perl implementation of Growl Network Notification Protocol (Client Part)
Net::Jabber::Protocol(3)
Jabber Protocol Library
Net::LDAP(3)
Lightweight Directory Access Protocol
Net::LDAP::Server(3)
LDAP server side protocol handling
Net::LMTP(3)
Local Mail Transfer Protocol Client
Net::MQTT(3)
Perl modules for MQTT Protocol (http://mqtt.org/)
Net::MQTT::Constants(3)
Module to export constants for MQTT protocol
Net::ManageSieve(3)
ManageSieve Protocol Client
Net::NSCA::Client::DataPacket(3)
Implements data packet for the NSCA protocol
Net::NSCA::Client::InitialPacket(3)
Implements initial packet for the NSCA protocol
Net::OAuth::AccessTokenRequest(3)
An OAuth protocol request for an Access Token
Net::OAuth::AccessTokenResponse(3)
An OAuth protocol response for an Access Token
Net::OAuth::ProtectedResourceRequest(3)
An OAuth protocol request for a Protected Resource
Net::OAuth::RequestTokenRequest(3)
An OAuth protocol request for a Request Token
Net::OAuth::RequestTokenResponse(3)
An OAuth protocol response for an Request Token
Net::OAuth::SignatureMethod::HMAC_SHA1(3)
HMAC_SHA1 Signature Method for OAuth protocol
Net::OAuth::SignatureMethod::HMAC_SHA256(3)
HMAC_SHA256 Signature Method for OAuth protocol
Net::OAuth::SignatureMethod::PLAINTEXT(3)
PLAINTEXT Signature Method for OAuth protocol
Net::OAuth::SignatureMethod::RSA_SHA1(3)
RSA_SHA1 Signature Method for OAuth protocol
Net::OAuth::Simple(3)
a simple wrapper round the OAuth protocol
Net::OAuth::UserAuthResponse(3)
An OAuth protocol response for an Access Token
Net::OAuth::V1_0A::AccessTokenRequest(3)
An OAuth protocol request for an Access Token
Net::OAuth::V1_0A::RequestTokenRequest(3)
An OAuth protocol request for a Request Token
Net::OAuth::V1_0A::RequestTokenResponse(3)
An OAuth protocol response for an Request Token
Net::OAuth::V1_0A::UserAuthResponse(3)
An OAuth protocol response for an Access Token
Net::OICQ(3)
Perl extension for QQ instant messaging protocol
Net::OSCAR(3)
Implementation of AOL's OSCAR protocol for instant messaging (for interacting with AIM a.k.a. AOL IM a.k.a. AOL Instant Messenger - and ICQ, too!)
Net::POP3(3)
Post Office Protocol 3 Client class (RFC1939)
Net::Packet::ARP(3)
Address Resolution Protocol layer 3 object
Net::Packet::CDP(3)
Cisco Discovery Protocol layer 4 object
Net::Packet::CDP::Address(3)
Cisco Discovery Protocol Address format
Net::Packet::CDP::Type(3)
base class for Cisco Discovery Protocol extension headers
Net::Packet::CDP::TypeAddresses(3)
Cisco Discovery Protocol Addresses extension header
Net::Packet::CDP::TypeCapabilities(3)
Cisco Discovery Protocol Capabilities extension header
Net::Packet::CDP::TypeDeviceId(3)
Cisco Discovery Protocol Device ID extension header
Net::Packet::CDP::TypePortId(3)
Cisco Discovery Protocol Port ID extension header
Net::Packet::CDP::TypeSoftwareVersion(3)
Cisco Discovery Protocol Software Version extension header
Net::Packet::ICMPv4(3)
Internet Control Message Protocol v4 layer 4 object
Net::Packet::IGMPv4(3)
Internet Group Management Protocol v4 layer 4 object
Net::Packet::IPv4(3)
Internet Protocol v4 layer 3 object
Net::Packet::IPv6(3)
Internet Protocol v6 layer 3 object
Net::Packet::PPP(3)
Point-to-Point Protocol layer 2 object
Net::Packet::PPPLCP(3)
PPP Link Control Protocol layer 3 object
Net::Packet::STP(3)
Spanning Tree Protocol layer 4 object
Net::Packet::TCP(3)
Transmission Control Protocol layer 4 object
Net::Packet::UDP(3)
User Datagram Protocol layer 4 object
Net::Proxy::Connector(3)
Base class for Net::Proxy protocols
Net::QMTP(3)
Quick Mail Transfer Protocol (QMTP) client
Net::RNDC(3)
Speak the BIND Remote Name Daemon Control (RNDC) V1 protocol
Net::RNDC::Packet(3)
RNDC Protocol V1 Packet Parsing and Generation
Net::Rsh(3)
perl client for Rsh protocol
Net::SAP(3)
Session Announcement Protocol (rfc2974)
Net::SCP(3)
Perl extension for secure copy protocol
Net::SDP(3)
Session Description Protocol (rfc2327)
Net::SFTP(3)
Secure File Transfer Protocol client
Net::SFTP::Foreign(3)
SSH File Transfer Protocol client
Net::SMTP(3)
Simple Mail Transfer Protocol Client
Net::SMTP_auth(3)
Simple Mail Transfer Protocol Client with AUTHentication
Net::SNPP(3)
Simple Network Pager Protocol Client
Net::SPDY(3)
SPDY protocol client and server implementation
Net::SPDY::Framer(3)
SPDY protocol implementation
Net::SPDY::Session(3)
Handle SPDY protocol connection
Net::SSH2(3)
Support for the SSH 2 protocol via libssh2
Net::SSH::Perl::Packet(3)
Packet layer of SSH protocol
Net::Server::Mail::ESMTP(3)
A module to implement the ESMTP protocol
Net::Server::Mail::LMTP(3)
A module to implement the LMTP protocol
Net::Server::Mail::SMTP(3)
A module to implement the SMTP protocol
Net::Server::Proto(3)
Net::Server Protocol compatibility layer
Net::Server::Proto::SSL(3)
Net::Server SSL protocol
Net::Server::Proto::SSLEAY(3)
Custom Net::Server SSL protocol handler based on Net::SSLeay
Net::Server::Proto::TCP(3), Net::Server::Proto::TCP(3)
Net::Server TCP protocol
Net::Server::Proto::UDP(3)
Net::Server UDP protocol
Net::Server::Proto::UNIX(3)
Net::Server UNIX protocol
Net::Server::Proto::UNIXDGRAM(3)
Net::Server UNIXDGRAM protocol
Net::Stomp(3)
A Streaming Text Orientated Messaging Protocol Client
Net::XMPP2(3)
An implementation of the XMPP Protocol
Net::XMPP::Protocol(3)
XMPP Protocol Module
NetPacket(3)
assemble/disassemble network packets at the protocol level
NetPacket::ARP(3)
Assemble and disassemble ARP (Address Resolution Protocol) packets
NetPacket::ICMP(3)
Assemble and disassemble ICMP (Internet Control Message Protocol) packets
NetPacket::IGMP(3)
Assemble and disassemble IGMP (Internet Group Mangement Protocol) packets
NetPacket::IP(3)
Assemble and disassemble IP (Internet Protocol) packets
NetPacket::TCP(3)
Assemble and disassemble TCP (Transmission Control Protocol) packets
NetPacket::UDP(3)
Assemble and disassemble UDP (User Datagram Protocol) packets
OpenXPKI::Client::SCEP(3)
OpenXPKI Simple Certificate Enrollment Protocol Client
OpenXPKI::Transport::Simple(3), Header "Name" OpenXPKI::Transport::Simple(3)
basic transport protocol
POE::Component::Jabber::Protocol(3)
A base class for implementing protocol differences
POE::Component::Server::SMTP(3)
SMTP Protocol Implementation
POE::Filter(3)
protocol abstractions for POE::Wheel and standalone use
POE::Filter::IRC(3)
-- A POE-based parser for the IRC protocol
POE::Filter::IRCD(3)
A POE-based parser for the IRC protocol
POE::Filter::Ident(3)
-- A POE-based parser for the Ident protocol
POE::Filter::SMTP(3)
SMTP Protocol Filter
Parse::IRC(3)
A parser for the IRC protocol
Protocol::ACME(3)
Interface to the Let's Encrypt ACME API
Protocol::ACME::Challenge(3)
Empty base class for ACME Challenges
Protocol::ACME::Challenge::LocalFile(3)
Challenge handler for simpleHttp via a local file
Protocol::ACME::Challenge::Manual(3)
Challenge handler for simpleHttp via manual setup
Protocol::ACME::Challenge::SimpleSSH(3)
Challenge handler for simpleHttp via SSH
Protocol::CassandraCQL(3), "Protocol::CassandraCQL"(3)
wire protocol support functions for Cassandra CQL
Protocol::CassandraCQL::Client(3), "Protocol::CassandraCQL::Client"(3)
a minimal Cassandra CQL client
Protocol::CassandraCQL::ColumnMeta(3), "Protocol::CassandraCQL::ColumnMeta"(3)
stores the column metadata of a Cassandra CQL query
Protocol::CassandraCQL::Frame(3), "Protocol::CassandraCQL::Frame"(3)
a byte buffer storing the content of a CQL message frame
Protocol::CassandraCQL::Frames(3), "Protocol::CassandraCQL::Frames"(3)
build or parse frame bodies for specific message types
Protocol::CassandraCQL::Result(3), "Protocol::CassandraCQL::Result"(3)
stores the result of a Cassandra CQL query
Protocol::CassandraCQL::Type(3), "Protocol::CassandraCQL::Type"(3)
represents a Cassandra CQL data type
Protocol::HTTP2(3)
HTTP/2 protocol implementation (RFC 7540)
Protocol::HTTP2::Client(3)
HTTP/2 client
Protocol::HTTP2::Server(3)
HTTP/2 server
Protocol::SocketIO(3)
Socket.IO protocol implementation
Protocol::SocketIO::Handshake(3)
Socket.IO handshake construction
Protocol::SocketIO::Message(3)
Socket.IO message parsing and building
Protocol::SocketIO::Path(3)
Socket.IO path parsing
Protocol::WebSocket(3)
WebSocket protocol
Protocol::WebSocket::Client(3)
WebSocket client
Protocol::WebSocket::Cookie(3)
Base class for WebSocket cookies
Protocol::WebSocket::Cookie::Request(3)
WebSocket Cookie Request
Protocol::WebSocket::Cookie::Response(3)
WebSocket Cookie Response
Protocol::WebSocket::Frame(3)
WebSocket Frame
Protocol::WebSocket::Handshake(3)
Base WebSocket Handshake class
Protocol::WebSocket::Handshake::Client(3)
WebSocket Client Handshake
Protocol::WebSocket::Handshake::Server(3)
WebSocket Server Handshake
Protocol::WebSocket::Message(3)
Base class for WebSocket request and response
Protocol::WebSocket::Request(3)
WebSocket Request
Protocol::WebSocket::Response(3)
WebSocket Response
Protocol::WebSocket::Stateful(3)
Base class for all classes with states
Protocol::WebSocket::URL(3)
WebSocket URL
Protocol::XMLRPC(3)
XML-RPC implementation
Protocol::XMLRPC::Client(3)
Simple XML-RPC client
Protocol::XMLRPC::Method(3)
methodCall and methodResponse base class
Protocol::XMLRPC::MethodCall(3)
XML-RPC methodCall request
Protocol::XMLRPC::MethodResponse(3)
XML-RPC methodResponse response
Protocol::XMLRPC::Value(3)
a base class for scalar values
Protocol::XMLRPC::Value::Array(3)
XML-RPC array
Protocol::XMLRPC::Value::Base64(3)
XML-RPC array
Protocol::XMLRPC::Value::Boolean(3)
XML-RPC array
Protocol::XMLRPC::Value::DateTime(3)
XML-RPC array
Protocol::XMLRPC::Value::Double(3)
XML-RPC array
Protocol::XMLRPC::Value::Integer(3)
XML-RPC array
Protocol::XMLRPC::Value::String(3)
XML-RPC array
Protocol::XMLRPC::Value::Struct(3)
XML-RPC struct
Protocol::XMLRPC::ValueFactory(3)
value objects factory
Protocol::XMPP(3)
Protocol-level support for XMPP interaction
Protocol::XMPP::Base(3)
base class for Protocol::XMPP
Protocol::XMPP::Element::Active(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Bind(3), Protocol::XMPP::Bind(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Body(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Challenge(3), Protocol::XMPP::Challenge(3)
deal with the XMPP challenge
Protocol::XMPP::Element::Feature(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Features(3), Protocol::XMPP::Features(3)
broker for setting up internal state and triggering reponses based on supported features
Protocol::XMPP::Element::HTML(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::IQ(3), Protocol::XMPP::Bind(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Mechanism(3), Protocol::XMPP::Mechanism(3)
information on available auth mechanisms
Protocol::XMPP::Element::Message(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Nick(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Presence(3), Protocol::XMPP::Success(3)
indicate success for an operation
Protocol::XMPP::Element::Session(3), Protocol::XMPP::Bind(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Stream(3)
handle the stream start/end tags
Protocol::XMPP::Element::Subject(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Element::Success(3), Protocol::XMPP::Success(3)
indicate success for an operation
Protocol::XMPP::ElementBase(3)
base class for Protocol::XMPP XML fragment handling
Protocol::XMPP::Message(3), Protocol::XMPP::Feature(3)
register ability to deal with a specific feature
Protocol::XMPP::Roster(3)
handle XMPP protocol stream
Protocol::XMPP::Stream(3)
handle XMPP protocol stream
Protocol::XMPP::TextElement(3)
handle a text element
Protocol::XMPP::User(3)
user-related functionality
RDF::Trine::Parser::LineProtocol(3)
RDF LineProtocol Parser
RedisDB::Parser(3), RedisDB::Parse::Redis(3)
redis protocol parser for RedisDB
RedisDB::Parser::PP(3)
redis protocol parser for RedisDB
RedisDB::Parser::XS(3)
redis protocol parser for RedisDB
Rinci::Undo(3)
(DEPRECATED) Protocol for undo operations in functions
SNMP::Info::AMAP(3)
SNMP Interface to Alcatel Mapping Adjacency Protocol (AMAP)
SNMP::Info::CDP(3)
SNMP Interface to Cisco Discovery Protocol (CDP) using SNMP
SNMP::Info::EDP(3)
SNMP Interface to the Extreme Discovery Protocol (EDP)
SNMP::Info::FDP(3)
SNMP Interface to Foundry Discovery Protocol (FDP) using SNMP
SNMP::Info::LLDP(3)
SNMP Interface to the Link Layer Discovery Protocol (LLDP)
SNMP::Info::SONMP(3)
SNMP Interface to SynOptics Network Management Protocol (SONMP)
TAP::Parser::Grammar(3)
A grammar for the Test Anything Protocol
Thrift::XS(3)
Faster Thrift binary protocol encoding and decoding
Thrift::XS::BinaryProtocol(3)
Standard binary protocol
Thrift::XS::CompactProtocol(3)
More efficient binary protocol
Tk::DragDrop::SunConst(3)
Constants for Sun's Drag&Drop protocol
WebDAO::Session(3)
Session interface to protocol specific function
WebService::GData(3)
Google data protocol v2
WebService::ISBNDB::Agent::REST(3)
Agent sub-class for the REST protocol
X11::Protocol(3)
Perl module for the X Window System Protocol, version 11
X11::Protocol::ChooseWindow(3)
-- user click to choose window
X11::Protocol::Connection(3)
Perl module abstract base class for X11 client to server connections
X11::Protocol::Connection::FileHandle(3)
Perl module base class for FileHandle-based X11 connections
X11::Protocol::Connection::INETFH(3)
Perl module for FileHandle-based TCP/IP X11 connections
X11::Protocol::Connection::INETSocket(3)
Perl module for IO::Socket::INET-based X11 connections
X11::Protocol::Connection::Socket(3)
Perl module base class for IO::Socket-based X11 connections
X11::Protocol::Connection::UNIXFH(3)
Perl module for FileHandle-based Unix-domain X11 connections
X11::Protocol::Connection::UNIXSocket(3)
Perl module for IO::Socket::UNIX-based X11 connections
X11::Protocol::Ext::BIG_REQUESTS(3)
Perl module for the X11 protocol Big Requests extension
X11::Protocol::Ext::Composite(3)
off-screen window contents
X11::Protocol::Ext::DAMAGE(3)
drawing notifications
X11::Protocol::Ext::DOUBLE_BUFFER(3)
window off-screen double buffering
X11::Protocol::Ext::DPMS(3)
Perl module for the X11 Protocol DPMS Extension
X11::Protocol::Ext::MIT_SCREEN_SAVER(3)
external screen saver support
X11::Protocol::Ext::MIT_SHM(3)
images in SysV style shared memory
X11::Protocol::Ext::MIT_SUNDRY_NONSTANDARD(3)
X11R2/R3 compatibility mode
X11::Protocol::Ext::RENDER(3)
Perl module for the X Rendering Extension
X11::Protocol::Ext::SHAPE(3)
Perl module for the X11 Protocol Nonrectangular Window Shape Extension
X11::Protocol::Ext::TOG_CUP(3)
colormap utilization policy extension
X11::Protocol::Ext::XC_MISC(3)
Perl module for the X11 Protocol XC-MISC Extension
X11::Protocol::Ext::XFIXES(3)
miscellaneous "fixes" extension
X11::Protocol::Ext::XFree86_DGA(3)
direct video memory access
X11::Protocol::Ext::XFree86_Misc(3), X11::Protocol::Ext::XFree86_Misc.pm(3)
Perl module for the XFree86 Misc Extension
X11::Protocol::Ext::XINERAMA(3)
multi-monitor display information
X11::Protocol::Ext::XTEST(3)
synthetic user input and more
X11::Protocol::Ext::X_Resource(3)
server resource usage
X11::Protocol::GrabServer(3)
-- object-oriented server grabbing
X11::Protocol::Other(3)
-- miscellaneous X11::Protocol helpers
X11::Protocol::WM(3)
-- window manager things for client programs
X11::Protocol::XSetRoot(3)
-- set root window background
XML::Compile::SOAP11(3)
SOAP 1.1 protocol
XMLRPC::Lite(3)
client and server implementation of XML-RPC protocol
ZoneMinder::Control::Vivotek_ePTZ(3)
ZoneMinder Perl extension for Vivotek ePTZ camera control protocol
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: -2) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.15.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
drawfcall(3), convM2W(3), convW2M(3), drawfcallfmt(3), readwsysmsg(3), sizeW2M(3)
window system protocol
fcall(3), Fcall(3), convS2M(3), convD2M(3), convM2S(3), convM2D(3), fcallfmt(3), dirfmt(3), dirmodefmt(3), read9pmsg(3), statcheck(3), sizeS2M(3), sizeD2M(3)
interface to Plan 9 File protocol
ftp(3)
A File Transfer Protocol client
gen_sctp(3)
Functions for communicating with sockets using the SCTP protocol
inet(3)
Access to TCP/IP protocols
ip(3), eipfmt(3), parseip(3), parseipmask(3), v4parseip(3), v4parsecidr(3), parseether(3), myipaddr(3), myetheraddr(3), maskip(3), equivip(3), defmask(3), isv4(3), v4tov6(3), v6tov4(3), nhgetl(3), nhgets(3), nhgetv(3), hnputl(3), hnputs(3), hnputv(3), ptclbsum(3), readipifc(3)
Internet protocol
librmt(3)
remote magtape protocol client interface library
megaco_tcp(3)
Interface module to TPKT transport protocol for Megaco/H.248
megaco_udp(3)
Interface module to UDP transport protocol for Megaco/H.248
mux(3), Mux(3), muxinit(3), muxrpc(3), muxthreads(3)
protocol multiplexor
ntp.conf(5)
Network Time Protocol (NTP) daemon configuration file format
ntpd(8)
Network Time Protocol service daemon
ntpdig(1)
standard Simple Network Time Protocol client program
ntpsnmpd(8)
NTP Simple Network Management Protocol sub-agent
ompi_crcp(7), OMPI_CRCP(7)
Open MPI MCA Checkpoint/Restart Coordination Protocol (CRCP) Framework: Overview of Open MPI's CRCP framework, and selected modules. Open MPI 4.1.1
rmic(1)
Generates stub, skeleton, and tie classes for remote objects that use the Java Remote Method Protocol (JRMP) or Internet Inter-Orb protocol (IIOP). Also generates Object Management Group (OMG) Interface Definition Language (IDL)
rscsi(1)
remote generic SCSI transport protocol server
srmt(1), rmt(1)
remote magnetic tape protocol server
ssh(6), SSH(6)
The ssh application implements the Secure Shell (SSH) protocol and provides an SSH File Transfer Protocol (SFTP) client and server
ssh_connection(3)
This module provides API functions to send SSH Connection Protocol events to the other side of an SSH channel
version(9p)
negotiate protocol version
home | help