Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
funopen(3), fropen(3), fwopen(3)
open a stream
gnop(8)
control utility for NOP GEOM class
ig4(4)
Synopsys DesignWare I2C Controller
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
library routines for remote procedure calls
rpc_svc_err(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3)
library routines for server side remote procedure call errors
vfs_getopt(9), vfs_getopts(9), vfs_flagopt(9), vfs_scanopt(9), vfs_copyopt(9), vfs_filteropt(9), vfs_setopt(9), vfs_setopt_part(9), vfs_setopts(9)
manipulate mount options and their values
CURLOPT_NOPROGRESS(3)
switch off the progress meter
CURLOPT_NOPROXY(3)
disable proxy use for specific hosts
Tcl_AddErrorInfo.tcl85(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
retrieve or record information about errors and other return options
Tcl_AddErrorInfo.tcl86(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
retrieve or record information about errors and other return options
Tcl_AddErrorInfo.tcl87(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
retrieve or record information about errors and other return options
anytopnm(1)
convert an arbitrary type of image file to PBM, PGM, or PPM synopsis
asciitopgm(1)
convert ASCII graphics into a PGM synopsis
atktopbm(1)
convert Andrew Toolkit raster object to PBM synopsis
avstopam(1)
convert an AVS X image to a Netpbm image synopsis
bioradtopgm(1)
convert a Biorad confocal file into a PGM image synopsis
bmptopnm(1)
convert a BMP file into a PBM, PGM, or PNM image synopsis
brushtopbm(1)
convert a doodle brush file into a PBM image synopsis
cameratopam(1)
convert raw camera image to PAM synopsis
cistopbm(1)
convert Compuserve RLE image to PBM synopsis
cmuwmtopbm(1)
convert a CMU window manager bitmap into a PBM image synopsis
ddbugtopbm(1)
convert Diddle or DiddleBug sketches to PBM files synopsis
diablo-files(5)
Synopsis of configuration and control files for Diablo
eyuvtoppm(1)
convert a Berkeley YUV file to a PPM file synopsis
fiascotopnm(1)
Convert compressed FIASCO image to PGM, or PPM synopsis
fitstopnm(1)
convert a FITS file into a PNM image synopsis
fstopgm(1)
convert a Usenix FaceSaver(tm) file into a PGM image synopsis
fwknop(8)
Firewall Knock Operator
fwknopd(8)
Firewall Knock Operator Daemon
g3topbm(1)
convert a Group 3 fax file into a PBM image synopsis
gemtopnm(1)
convert a GEM .img file into a PNM image synopsis
getablexprnumbinoper(3)
gives the number of binary operators in an expression. man1/alc_origin.1
giftopnm(1)
convert a GIF file into a PNM image synopsis
gouldtoppm(1)
convert Gould scanner file into a PPM image synopsis
hdifftopam(1)
convert horizontal difference image to original PAM image synopsis
hipstopgm(1)
convert a HIPS file into a PGM image synopsis
hpcdtoppm(1)
convert a Photo-CD image into a PBM image synopsis
icewm-winoptions(5), icewm-winoptions(5)
IceWM window options configuration file
icontopbm(1)
convert a Sun icon image to PBM synopsis
ilbmtoppm(1)
convert an ILBM file into a PPM image synopsis
imgtoppm(1)
convert an Img-whatnot file into a PPM image synopsis
infotopam(1)
convert Amiga .info icons to PAM synopsis
jbigtopnm(1)
JBIG to PNM image file converter synopsis
jpeg2ktopam(1)
convert JPEG-2000 code stream to PAM/PNM synopsis
jpegtopnm(1)
convert JPEG/JFIF file to PPM or PGM image synopsis
libpbm(3)
libnetpbm functions to read and write PBM image files synopsis
libpgm(3)
libnetpbm functions to read and write PGM image files synopsis
libpnm(3)
libnetpbm functions to read and write PNM image files synopsis
libppm(3)
functions for PPM programs synopsis
llvm-addr2line90(1), llvm-addr2line(1)
a drop-in replacement for addr2line # llvm-addr2line - a drop-in replacement for addr2line ## SYNOPSIS llvm-addr2line [options] ## DESCRIPTION llvm-addr2line is an alias for the [llvm-symbolizer](llvm-symbolizer) tool with different defaults. The goal is to make it a drop-in replacement for GNU(aqs addr2line. Here are some of those differences: 0.0 (bu 2 Defaults not to print function names. Use [-f](llvm-symbolizer-opt-f) to enable that. (bu 2 Defaults not to demangle function names. Use [-C](llvm-symbolizer-opt-C) to switch the demangling on. (bu 2 Defaults not to print inlined frames. Use [-i](llvm-symbolizer-opt-i) to show inlined frames for a source code location in an inlined function. (bu 2 Uses [--output-style=GNU](llvm-symbolizer-opt-output-style) by default. ## SEE ALSO Refer to [llvm-symbolizer](llvm-symbolizer) for additional information
llvm-pdbutil-devel(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-pdbutil10(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-pdbutil11(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-pdbutil12(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-pdbutil13(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-pdbutil70(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-pdbutil80(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-pdbutil90(1), llvm-pdbutil(1)
PDB File forensics and diagnostics 0.0 (bu 2 %Synopsis (bu 2 %Description (bu 2 %Subcommands 2.0 (bu 2 %pretty 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %Filtering and Sorting Options (bu 2 %Symbol Type Options (bu 2 %Other Options (bu 2 %dump 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF Container Options (bu 2 %Module & File Options (bu 2 %Symbol Options (bu 2 %Type Record Options (bu 2 %Miscellaneous Options (bu 2 %bytes 2.0 (bu 2 %Summary (bu 2 %Options 2.0 (bu 2 %MSF File Options (bu 2 %PDB Stream Options (bu 2 %DBI Stream Options (bu 2 %Module Options (bu 2 %Type Record Options (bu 2 %pdb2yaml 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %yaml2pdb 2.0 (bu 2 %Summary (bu 2 %Options (bu 2 %merge 2.0 (bu 2 %Summary (bu 2 %Options
llvm-ranlib90(1), llvm-ranlib(1)
generates an archive index # llvm-ranlib - generates an archive index ## SYNOPSIS llvm-ranlib [options] ## DESCRIPTION llvm-ranlib is an alias for the [llvm-ar](llvm-ar.html) tool that generates an index for an archive. It can be used as a replacement for GNU(aqs ranlib tool. Running llvm-ranlib is equivalent to running llvm-ar s. ## SEE ALSO Refer to [llvm-ar](llvm-ar.html) for additional information
llvm-size90(1), llvm-size(1)
print segment sizes # llvm-size - print segment sizes ## SYNOPSIS llvm-size [options] ## DESCRIPTION llvm-size is a tool that prints segment sizes in object files. The goal is to make it a drop-in replacement for GNU(aqs size
llvm-strings90(1), llvm-strings(1)
print strings # llvm-strings - print strings ## SYNOPSIS llvm-strings [options] ## DESCRIPTION llvm-strings is a tool that prints strings in object files. The goal is to make it a drop-in replacement for GNU(aqs size
llvm-strip90(1), llvm-strip(1)
object stripping tool # llvm-strip - object stripping tool ## SYNOPSIS llvm-strip [options] ## DESCRIPTION llvm-strip is a tool to strip sections and symbols from object files. The tool is still in active development, but in most scenarios it works as a drop-in replacement for GNU(aqs strip. ## SEE ALSO [llvm-objcopy](llvm-objcopy.html)
manweb(1)
browse netpbm (and other) documentation synopsis
mgrtopbm(1)
convert a MGR bitmap into a PBM image synopsis
mkgshmm(1)
convert monophone HMM to GS HMM for Julius
monop(1), monop2(1)
Mono Class Outline Viewer
mtnopt(1)
generate shell variables from monotone workspace options
nbdkit-noparallel-filter(1)
nbdkit noparallel filter
nop(1)
pretty-print graph file
palmtopnm(1)
convert a Palm Bitmap to a PNM image synopsis
pamaddnoise(1)
add noise to a Netpbm image synopsis
pamaltsat(1)
increase or decrease the saturation of an image using one of several alternative methods. synopsis
pamarith(1)
perform arithmetic on two Netpbm images synopsis
pambackground(1)
create a mask of the background area of an image synopsis
pambayer(1)
interpret Bayer patterns synopsis
pambrighten(1)
change a PPM image's Saturation and Value synopsis
pamchannel(1)
extract channels from a PAM image synopsis
pamcomp(1)
composite (overlay) two Netpbm images together synopsis
pamcut(1)
cut a rectangle out of a PAM, PBM, PGM, or PPM image synopsis
pamdepth(1)
change the depth (color resolution) in a Netpbm image synopsis
pamditherbw(1)
dither grayscale image to black and white synopsis
pamedge(1)
edge-detect an image synopsis
pamendian(1)
reverse endianness of a Netpbm image synopsis
pamenlarge(1)
Enlarge a Netpbm image N times synopsis
pamexec(1)
Execute a shell command on each image in a Netpbm image stream synopsis
pamfile(1)
describe a Netpbm (PAM or PNM) file synopsis
pamfind(1)
Print the locations of all tuples of a certain value in an image synopsis
pamfix(1)
repair a Netpbm image with various corruptions synopsis
pamflip(1)
flip or rotate a PAM or PNM image synopsis
pamfunc(1)
Apply a simple monadic arithmetic function to a Netpbm image synopsis
pamgauss(1)
create a two-dimensional Gaussian function as a PAM image synopsis
pamgetcolor(1)
display the average colors from specified regions in an image. synopsis
pamgradient(1)
create a four-corner gradient PAM image synopsis
pamhue(1)
change a Netpbm image's hues synopsis
pamlevels(1)
effect a 'levels' transformation synopsis
pamlookup(1)
map an image to a new image by using it as indices into a table synopsis
pammasksharpen(1)
Sharpen an image via an unsharp mask synopsis
pammixinterlace(1)
mix adjacent lines to merge interlaced images synopsis
pammixmulti(1)
blend together multiple PAM images synopsis
pammosaicknit(1)
validate a mosaic knitting pattern synopsis
pamperspective(1)
a reverse scanline renderer for Netpbm images synopsis
pampick(1)
pick images out of a multi-image Netpbm image stream synopsis
pampop9(1)
simulate a multi-lens camera such as the Pop9 synopsis
pamrecolor(1)
alter colors without affecting luminance synopsis
pamrgbatopng(1)
convert PAM color/transparency image to PNG synopsis
pamrubber(1)
a rubber-sheeting utility that stretches an image based on control points synopsis
pamscale(1)
scale a Netpbm image synopsis
pamshadedrelief(1)
generate shaded relief image from an elevation map synopsis
pamsharpness(1)
measure the sharpness of a PNM/PAM image synopsis
pamsistoaglyph(1)
convert a single-image stereogram to a red/cyan anaglyphic image synopsis
pamslice(1)
extract one line of values out of a Netpbm image synopsis
pamsplit(1)
split a multi-image Netpbm file into single-image files synopsis
pamstack(1)
stack planes of multiple PAM images into one PAM image synopsis
pamstereogram(1)
create a single-image stereogram from a PAM depth map synopsis
pamstretch(1)
scale up a PNM or PAM image by interpolating between pixels. synopsis
pamstretch-gen(1)
use pamstretch and pamscale to scale by non-integer values synopsis
pamsumm(1)
Summarize the samples in a Netpbm image arithmetically synopsis
pamsummcol(1)
summarize (sum, average, etc) a Netpbm image by column synopsis
pamtable(1)
print the raster as a table of numerical sample values synopsis
pamthreshold(1)
threshold grayscale image to black and white synopsis
pamtilt(1)
print the tilt angle of a PGM file synopsis
pamtoavs(1)
convert a Netpbm image to an AVS X image synopsis
pamtodjvurle(1)
convert a Netpbm image to DjVu Color RLE format synopsis
pamtofits(1)
convert a Netpbm image into FITS format synopsis
pamtogif(1)
convert a Netpbm image to a GIF image synopsis
pamtohdiff(1)
convert PAM image to horizontal difference image synopsis
pamtohtmltbl(1)
convert pnm/pam visual image to an HTML table synopsis
pamtojpeg2k(1)
convert PAM/PNM image to a JPEG-2000 code stream synopsis
pamtompfont(1)
Convert Netpbm image to Mplayer bitmap font file synopsis
pamtooctaveimg(1)
convert a Netpbm image to a GNU Octave image synopsis
pamtopam(1)
copy PAM image synopsis
pamtopdbimg(1)
convert a Netpbm image to a Palm Pilot Image Viewer PDB Image synopsis
pamtopfm(1)
Convert Netpbm image to PFM (Portable Float Map) synopsis
pamtopng(1)
convert a Netpbm image to PNG synopsis
pamtopnm(1)
convert PAM image to PBM, PGM, or PPM synopsis
pamtosrf(1)
convert a sequence of Netpbm images to a SRF image file synopsis
pamtosvg(1)
convert a Netpbm image to a SVG (Scalable Vector Graphics) image synopsis
pamtotga(1)
convert a Netpbm image to a TrueVision Targa file synopsis
pamtotiff(1)
convert a Netpbm image to a TIFF file synopsis
pamtowinicon(1)
convert Netpbm PAM images to a Microsoft Windows icon file synopsis
pamtoxvmini(1)
convert Netpbm image to an XV "thumbnail" picture synopsis
pamtris(1)
triangle rasterizer featuring perspective-correct interpolation of generic vertex attributes and depth buffering synopsis
pamunlookup(1)
inverse of pamlookup synopsis
pamvalidate(1)
validate Netpbm image format synopsis
pamwipeout(1)
replace detail with smooth gradient from one edge to the other synopsis
pbmclean(1)
despeckle a PBM image synopsis
pbmlife(1)
apply Conway's rules of Life to a PBM image synopsis
pbmmake(1)
create a blank bitmap of a specified size synopsis
pbmminkowski(1)
compute Minkowski integral synopsis
pbmpage(1)
create a one page test pattern for printing synopsis
pbmpscale(1)
enlarge a PBM image with edge smoothing synopsis
pbmreduce(1)
read a PBM image and reduce it N times synopsis
pbmtext(1)
render text into a PBM image synopsis
pbmtextps(1)
render text into a PBM image using a postscript interpreter synopsis
pbmtoascii(1)
convert a PBM image to ASCII graphics synopsis
pbmtoatk(1)
convert a PBM image to a Andrew Toolkit raster object synopsis
pbmtocis(1)
convert a PBM image to a CompuServe RLE image synopsis
pbmtodjvurle(1)
convert a PBM image to DjVu Bitonal RLE format synopsis
pbmtoescp2(1)
convert a PBM image to a ESC/P2 printer file synopsis
pbmtog3(1)
convert a PBM image into a Group 3 MH fax file synopsis
pbmtoibm23xx(1)
convert a PBM image to IBM 23XX printer stream synopsis
pbmtoicon(1)
convert a Sun icon image to PBM synopsis
pbmtolj(1)
convert a PBM image to HP LaserJet format synopsis
pbmtolps(1)
convert PBM image to PostScript synopsis
pbmtomacp(1)
convert a PBM image to a MacPaint file synopsis
pbmtomatrixorbital(1)
convert a PBM image to a Matrix Orbital LCD image synopsis
pbmtomgr(1)
convert a PBM image into a MGR bitmap synopsis
pbmtonokia(1)
convert a PBM image to Nokia Smart Messaging Formats synopsis
pbmtoppa(1)
convert PBM image to HP Printer Performance Architecture (PPA) synopsis
pbmtopsg3(1)
convert PBM images to Postscript with G3 fax compression synopsis
pbmtosunicon(1)
convert a PBM image into a Sun icon synopsis
pbmtoxbm(1)
convert a PBM image to an X11 bitmap synopsis
pbmtoybm(1)
convert a PBM image into a Bennet Yee "face" file synopsis
pbmupc(1)
create a Universal Product Code PBM image synopsis
pdbimgtopam(1)
convert a Palm Pilot Image Viewer PDB Image to a PAM image synopsis
pfmtopam(1)
Convert PFM (Portable Float Map) image to Netpbm format synopsis
pgmbentley(1)
Bentleyize a PGM image synopsis
pgmcrater(1)
create cratered terrain by fractal forgery synopsis
pgmdeshadow(1)
Deshadow a PGM image synopsis
pgmhist(1)
print a histogram of the values in a PGM image synopsis
pgmkernel(1)
generate a convolution kernel synopsis
pgmmake(1)
create a PGM image of a specified gray level and dimensions synopsis
pgmmedian(1)
apply a median filter to a PGM file synopsis
pgmminkowski(1)
compute Minkowski integral synopsis
pgmmorphconv(1)
perform morphological convolutions: dilation, erosion synopsis
pgmnoise(1)
create a PGM image made up of white noise synopsis
pgmramp(1)
generate a grayscale ramp synopsis
pgmtexture(1)
calculate textural features on a PGM image synopsis
pgmtofs(1)
convert PGM image to Usenix FaceSaver(tm) format synopsis
pgmtopgm(1)
copy PGM image synopsis
pgmtoppm(1)
colorize a PGM (grayscale) image into a PPM (color) image synopsis
pgmtosbig(1)
convert PGM image to SBIG format synopsis
pgmtost4(1)
convert PGM image to SBIG ST-4 format synopsis
picttoppm(1)
convert a Macintosh PICT file to a PPM synopsis
pngtopam(1)
convert a PNG image into a Netpbm image synopsis
pngtopnm(1)
convert a PNG image into a PNM image synopsis
pnmalias(1)
antialias a PNM image synopsis
pnmcat(1)
concatenate Netpbm images synopsis
pnmcolormap(1)
create quantization color map for a Netpbm image synopsis
pnmconvol(1)
general MxN convolution on a Netpbm image synopsis
pnmcrop(1)
crop a Netpbm image synopsis
pnmgamma(1)
perform gamma adjustment on a PNM image synopsis
pnmhisteq(1)
histogram equalize a PNM image synopsis
pnmhistmap(1)
draw a histogram for a PGM or PPM file synopsis
pnmindex(1)
build a visual index of a bunch of PNM images synopsis
pnmmargin(1)
add borders to a PNM image synopsis
pnmmercator(1)
transform a worldmap from rectangular projection to Mercator projection and vice-versa synopsis
pnmmontage(1)
create a montage of PNM images synopsis
pnmnlfilt(1)
non-linear filters: smooth, alpha trim mean, optimal estimation smoothing, edge enhancement. synopsis
pnmnorm(1)
normalize the contrast in a Netpbm image synopsis
pnmpad(1)
add borders to a PNM image synopsis
pnmpaste(1)
paste a rectangle into a PNM image synopsis
pnmpsnr(1)
compute the difference between two images (the PSNR) synopsis
pnmquant(1)
quantize the colors in a Netpbm image to a smaller set synopsis
pnmquantall(1)
run Pnmquant on a bunch of files all at once, so they share a common colormap synopsis
pnmremap(1)
replace colors in a PNM image with colors from another set synopsis
pnmrotate(1)
rotate a PNM image by some angle synopsis
pnmshear(1)
shear a PNM image by a specified angle synopsis
pnmsmooth(1)
smooth out an image synopsis
pnmstitch(1)
stitch together two panoramic (side-by-side) photographs synopsis
pnmtile(1)
replicate an image to fill a specified region synopsis
pnmtofiasco(1)
Convert PNM file to FIASCO compressed file synopsis
pnmtojpeg(1)
convert PNM image to a JFIF ("JPEG") image synopsis
pnmtopalm(1)
convert a PNM image to a Palm Bitmap synopsis
pnmtopclxl(1)
convert a PNM image to an HP LaserJet PCL XL printer stream synopsis
pnmtopng(1)
convert a PNM image to PNG synopsis
pnmtops(1)
convert PNM image to Postscript synopsis
pnmtotiffcmyk(1)
convert a Netpbm image into a CMYK encoded TIFF file synopsis
ppm3d(1)
convert two PPM images into an anaglyph (red/blue 3d glasses) PPM synopsis
ppmbrighten(1)
change a PPM image's Saturation and Value synopsis
ppmchange(1)
change all pixels of one color to another in a PPM image synopsis
ppmcie(1)
draw a CIE color chart as a PPM image synopsis
ppmcolormask(1)
produce mask of areas of a certain color in a PPM file synopsis
ppmdcfont(1)
Turn a Ppmdfont file into C source for a builtin font synopsis
ppmddumpfont(1)
dump a Ppmdfont file synopsis
ppmdim(1)
dim a PPM image synopsis
ppmdither(1)
ordered dither for color images synopsis
ppmdmkfont(1)
Create Ppmdfont "standard". synopsis
ppmdraw(1)
draw lines, text, etc on a PPM image synopsis
ppmfade(1)
generate a transition between two image files using special effects synopsis
ppmforge(1)
fractal forgeries of clouds, planets, and starry skies synopsis
ppmglobe(1)
generate strips to glue onto a sphere synopsis
ppmhist(1)
print a histogram of the colors in a PPM image synopsis
ppmlabel(1)
add text to a PPM image synopsis
ppmmake(1)
create a PPM image of a specified color and dimensions synopsis
ppmmix(1)
blend together two PPM images synopsis
ppmntsc(1)
Make RGB colors legal for NTSC or PAL color systems. synopsis
ppmpat(1)
make a pretty PPM image synopsis
ppmquant(1)
quantize the colors in a PPM image down to a specified number synopsis
ppmrainbow(1)
Generate a rainbow synopsis
ppmrelief(1)
compute a relief of a PPM image synopsis
ppmrough(1)
create PPM image of two colors with a ragged border between them synopsis
ppmshadow(1)
add simulated shadows to a PPM image synopsis
ppmshift(1)
shift lines of a PPM image left or right by a random amount synopsis
ppmspread(1)
displace a PPM image's pixels by a random amount synopsis
ppmtoarbtxt(1)
generate image in arbitrary text format from PPM image synopsis
ppmtoascii(1)
convert a PPM image to ASCII graphics with ANSI terminal color synopsis
ppmtobmp(1)
convert a PPM image into a BMP file synopsis
ppmtoicr(1)
convert a PPM image into NCSA ICR format synopsis
ppmtoilbm(1)
convert a PPM image into an ILBM file synopsis
ppmtolj(1)
convert a PPM image to an HP LaserJet PCL 5 Color file synopsis
ppmtomitsu(1)
convert a PPM image to a Mitsubishi S340-10 file synopsis
ppmtompeg(1)
encode an MPEG-1 bitstream synopsis
ppmtopgm(1)
convert a PPM image to a PGM image synopsis
ppmtopict(1)
convert a PPM image to a Macintosh PICT file synopsis
ppmtopj(1)
convert a PPM image to an HP PaintJet file synopsis
ppmtopjxl(1)
convert a PPM image to an HP PaintJet XL PCL file synopsis
ppmtoppm(1)
copy PPM image synopsis
ppmtospu(1)
convert a PPM image to an Atari Spectrum 512 image synopsis
ppmtoterm(1)
convert a PPM image to a ANSI ISO 6429 ascii image synopsis
ppmtowinicon(1)
convert PPM image into a Windows .ico file synopsis
ppmtoxpm(1)
convert a PPM image to an X11 pixmap synopsis
ppmtoyuv(1)
convert a PPM image to an Abekas YUV file synopsis
ppmwheel(1)
make a PPM image of a color wheel synopsis
pstopnm(1)
convert a PostScript file to a PNM image synopsis
rasttopnm(1)
convert a Sun rasterfile to a PNM image synopsis
rlatopam(1)
convert Alias/Wavefront RLA and RPF image files to PAM image files. synopsis
rletopnm(1)
convert a Utah Raster Tools RLE image file to a PNM image file. synopsis
sbigtopgm(1)
convert an SBIG CCDOPS file to PGM synopsis
sc_LinOPSimpleCo(3), sc::LinOPSimpleCo(3)
The LinOPSimpleCo class describes an out-of-plane component of a linear bend internal coordinate of a molecule
sc_QNewtonOpt(3), sc::QNewtonOpt(3)
The QNewtonOpt implements a quasi-Newton optimization scheme
sgitopnm(1)
convert a SGI image file to PNM synopsis
slapo-nops(5)
Remove Null Operations Overlay to slapd
snopea(1)
convert SNOBOL snopea documentation to roff and HTML
snopea(7)
A little Plain Old Documentation format for SNOBOL4
sputoppm(1)
convert an Atari uncompressed Spectrum file to a PPM image synopsos
srftopam(1)
convert a SRF image file to Netpbm images synopsis
st4topgm(1)
convert an SBIG ST-4 camera file to PGM synopsis
stendhal(1), Stendal(1)
Client .SH SYNOPSIS stendhal [ vmargs ]
sunicontopnm(1)
convert a Sun icon into a Netpbm image synopsis
thinkjettopbm(1)
convert HP ThinkJet printer commands file to PBM synopsis
tifftopnm(1)
convert a TIFF file into a PNM image synopsis
unopkg(1)
LibreOffice Extension Manager
winicontopam(1)
convert a Microsoft Windows icon file into a Netpbm PAM file synopsis
winicontoppm(1)
convert a Windows .ico image into 1 or more PPM images synopsis
winop(n)
Perform assorted window and image operations
xbmtopbm(1)
convert an X11 or X10 bitmap to a PBM image synopsis
xpmtoppm(1)
convert an X11 pixmap to a PPM image synopsis
xvminitoppm(1)
convert an XV "thumbnail" picture to PPM synopsis
xwdtopnm(1)
convert an X11 or X10 window dump file to a PNM image synopsis
yuy2topam(1)
convert YUY2 bytes to PAM synopsis
zeisstopnm(1)
convert a Zeiss confocal file to PNM synopsis
App::Nopaste(3)
Easy access to any pastebin
App::Nopaste::Command(3)
command-line utility for App::Nopaste
App::Nopaste::Service(3)
base class for nopaste services
App::Nopaste::Service::Codepeek(3)
(DEPRECATED) Service for Codepeek - http://codepeek.com
App::Nopaste::Service::Debian(3)
Service provider for Debian - https://paste.debian.net/
App::Nopaste::Service::Gist(3)
Service provider for GitHub gist - http://gist.github.com/
App::Nopaste::Service::GitLab(3)
Service provider for GitLab snippets
App::Nopaste::Service::Mojopaste(3)
Service provider for mojopaste
App::Nopaste::Service::PastebinCom(3)
Service provider for Pastebin - http://pastebin.com/
App::Nopaste::Service::Pastie(3)
Service provider for Pastie - pastie.org
App::Nopaste::Service::Shadowcat(3)
Service provider for Shadowcat - http://paste.scsys.co.uk/
App::Nopaste::Service::Snitch(3)
Service provider for Snitch - http://nopaste.snit.ch/
App::Nopaste::Service::Ubuntu(3)
Service provider for Ubuntu - https://paste.ubuntu.com/
App::Nopaste::Service::ssh(3)
Copies files to your server using scp
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Catalyst::Authentication::Credential::NoPassword(3)
Authenticate a user without a password
CatalystX::SimpleLogin::Form::LoginOpenID(3)
OpenID validation role for the login form
DBIx::Class::Migration::RunScript::Trait::Populate(3)
Populate fixtures =head1 SYNOPSIS use DBIx::Class::Migration::RunScript; builder { SchemaLoader, Populate, sub { shift->populate(countries); }; };
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3)
Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
DBIx::SQLEngine::Driver::Trait::NoPlaceholders(3)
For drivers without placeholders
Devel::REPL::Plugin::Nopaste(3)
#nopaste to upload session's input and output
Dist::Zilla::App::Command::nop(3)
initialize dzil, then exit
Event(3), Win(3), eventfmt(3), newwin(3), pipetowin(3), pipewinto(3), sysrun(3), winaddr(3), winclosefiles(3), winctl(3), windel(3), windeleteall(3), windows(3), wineventchan(3), winfd(3), winfree(3), winmread(3), winname(3), winopenfd(3), winprint(3), winread(3), winreadaddr(3), winreadevent(3), winseek(3), winwrite(3), winwriteevent(3)
acme client library
Goo::Profiler(3), Profiler(3)
Show a synopsis of a Thing
Goo::Thing::gml::Profiler(3)
Create a synopsis of a Goo Markup Language (GML) Thing
Goo::Thing::js::JavascriptProfiler(3), JavascriptProfiler(3)
Create a synopsis of a program / module / script
Goo::Thing::pm::Perl5Profiler(3)
Create a synopsis of a Perl5 program
Goo::Thing::pm::Perl6Profiler(3)
Create a synopsis of a program / module / script
HTTP::Session::State::Null(3)
nop
Image(3), draw(3), drawop(3), gendraw(3), gendrawop(3), drawreplxy(3), drawrepl(3), replclipr(3), line(3), lineop(3), poly(3), polyop(3), fillpoly(3), fillpolyop(3), bezier(3), bezierop(3), bezspline(3), bezsplineop(3), bezsplinepts(3), fillbezier(3), fillbezierop(3), fillbezspline(3), fillbezsplineop(3), ellipse(3), ellipseop(3), fillellipse(3), fillellipseop(3), arc(3), arcop(3), fillarc(3), fillarcop(3), icossin(3), icossin2(3), border(3), borderop(3), string(3), stringop(3), stringn(3), stringnop(3), runestring(3), runestringop(3), runestringn(3), runestringnop(3), stringbg(3), stringbgop(3), stringnbg(3), stringnbgop(3), runestringbg(3), runestringbgop(3), runestringnbg(3), runestringnbgop(3), _string(3), ARROW(3), drawsetdebug(3)
graphics functions PB L
Mail::Box::Identity(3)
represents an unopened folder
OpenXPKI::Server::Workflow::Condition::DatapoolEntry(3)
n .SH "SYNOPSIS private_key_not_empty: class: OpenXPKI::Server::Workflow::Condition::DatapoolEntry param: _map_key: $cert_identifier namespace: certificate.privatekey condition: exists" .SH "SYNOPSIS private_key_not_empty: class: OpenXPKI::Server::Workflow::Condition::DatapoolEntry param: _map_key: $cert_identifier namespace: certificate.privatekey condition: exists" Header "SYNOPSIS private_key_not_empty: class: OpenXPKI::Server::Workflow::Condition::DatapoolEntry param: _map_key: $cert_identifier namespace: certificate.privatekey condition: exists"
Paws::ElasticBeanstalk::DescribeConfigurationOptions(3)
Arguments for method DescribeConfigurationOptions on Paws::ElasticBeanstalk
Perl::Critic::Policy::Bangs::ProhibitNoPlan(3)
Know what you're going to test
Perl::Critic::Policy::ValuesAndExpressions::ProhibitMixedBooleanOperators(3)
Write " !$foo && $bar || $baz " instead of " not $foo && $bar or $baz"
Promises::Cookbook::SynopsisBreakdown(3)
A breakdown of the SYNOPSIS section of Promises
Reply::Plugin::Nopaste(3)
command to nopaste a transcript of the current session
SNMP::Info::Layer1::S3000(3)
SNMP Interface to Synoptics / Nortel Hubs
SNMP::Info::SONMP(3)
SNMP Interface to SynOptics Network Management Protocol (SONMP)
Search::Elasticsearch::CxnPool::Static::NoPing(3)
A CxnPool for connecting to a remote cluster without the ability to ping
Search::Elasticsearch::Role::CxnPool::Static::NoPing(3)
A CxnPool for connecting to a remote cluster without the ability to ping
Set::Infinite::Basic(3)
Sets of intervals 6 =head1 SYNOPSIS use Set::Infinite::Basic; $set = Set::Infinite::Basic->new(1,2); # [1..2] print $set->union(5,6); # [1..2],[5..6]
Test::Synopsis(3)
Test your SYNOPSIS code
WWW::Mechanize::Plugin::HelloWorld(3)
a sample WWW::Mechanize::Pluggable plugin -head1 SYNOPSIS use WWW::Mechanize::Pluggable; # This module is automatically loaded into WWW::Mechanize::Pluggable
WebService::NoPaste(3), WebService::NoPaste(3)
Post to Paste Web Pages
nopaste(1)
command-line utility to nopaste
pyi-makespec(1)
Create a spec file for your PyInstaller project l .SH SYNOPSIS pyi-makespec <options> SCRIPT [SCRIPT ...]
pyinstaller(1)
Configure and build a PyInstaller project in one run l .SH SYNOPSIS pyinstaller <options> SCRIPT... pyinstaller <options> SPECFILE
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
home | help