Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
VFS_MOUNT(9)
mount a file system
VFS_UNMOUNT(9)
unmount a file system
autofs(5)
automounter filesystem
automount(8)
update autofs mounts
automountd(8)
daemon handling autofs mount requests
autounmountd(8)
daemon unmounting automounted filesystems
config_intrhook(9)
schedule a function to be run after interrupts have been enabled, but before root is mounted
exports(5)
define remote mount points for NFS mount requests
free_mntarg(9), kernel_mount(9), kernel_vmount(9), mount_arg(9), mount_argb(9), mount_argf(9), mount_argsu(9)
functions provided as part of the kernel mount interface
getfsstat(2)
get list of all mounted file systems
getmntinfo(3)
get information about mounted file systems
gmountver(8)
control utility for disk mount verification GEOM class
insmntque(9), insmntque1(9)
associate a vnode with a mount
mdmfs(8), mount_mfs(8)
configure and mount an in-memory file system using the md(4) driver or the tmpfs(5) filesystem
mount(2), nmount(2), unmount(2)
mount or dismount a file system
mount(8)
mount file systems
mount.conf(5)
root file system mount configuration file
mount_cd9660(8)
mount an ISO-9660 file system
mount_fusefs(8)
mount a Fuse file system daemon
mount_msdosfs(8)
mount an MS-DOS file system
mount_nfs(8)
mount NFS file systems
mount_nullfs(8)
mount a loopback file system sub-tree; demonstrate the use of a null file system layer
mount_smbfs(8)
mount a shared resource from an SMB file server
mount_udf(8)
mount a UDF file system
mount_unionfs(8)
mount union file systems
mountd(8)
service remote NFS mount requests
pthread_cond_timedwait(3)
wait on a condition variable for a specific amount of time
rpc.umntall(8)
notify NFS servers about unmounted NFS file systems
showmount(8)
show remote nfs mounts on host
sysdecode_mask(3), sysdecode_accessmode(3), sysdecode_atflags(3), sysdecode_capfcntlrights(3), sysdecode_fcntl_fileflags(3), sysdecode_fileflags(3), sysdecode_filemode(3), sysdecode_flock_operation(3), sysdecode_mlockall_flags(3), sysdecode_mmap_flags(3), sysdecode_mmap_prot(3), sysdecode_mount_flags(3), sysdecode_msg_flags(3), sysdecode_msync_flags(3), sysdecode_open_flags(3), sysdecode_pipe2_flags(3), sysdecode_reboot_howto(3), sysdecode_rfork_flags(3), sysdecode_semget_flags(3), sysdecode_sendfile_flags(3), sysdecode_shmat_flags(3), sysdecode_sctp_nxt_flags(3), sysdecode_sctp_rcv_flags(3), sysdecode_sctp_snd_flags(3), sysdecode_socket_type(3), sysdecode_thr_create_flags(3), sysdecode_umtx_cvwait_flags(3), sysdecode_umtx_rwlock_flags(3), sysdecode_vmprot(3), sysdecode_wait4_options(3), sysdecode_wait6_options(3)
print name of various bitmask values
umount(8)
unmount file systems
vflush(9)
flush vnodes for a mount point
vfs_busy(9)
marks a mount point as busy
vfs_getopt(9), vfs_getopts(9), vfs_flagopt(9), vfs_scanopt(9), vfs_copyopt(9), vfs_filteropt(9), vfs_setopt(9), vfs_setopt_part(9), vfs_setopts(9)
manipulate mount options and their values
vfs_getvfs(9)
returns a mount point given its file system identifier
vfs_mountedfrom(9)
sets the mounted from name for a mount
vfs_rootmountalloc(9)
allocate a root mount structure
vfs_suser(9)
check if credentials have superuser privileges for a mount point
vfs_unbusy(9)
unbusy a mount point
vfs_unmountall(9)
unmount all file systems
zfs-jail(8)
Attaches and detaches ZFS filesystems from FreeBSD jails. A Tn ZFS dataset can be attached to a jail by using the Cm jail subcommand. You cannot attach a dataset to one jail and the children of the same dataset to another jail. You can also not attach the root file system of the jail or any dataset which needs to be mounted before the zfs rc script is run inside the jail, as it would be attached unmounted until it is mounted from the rc script inside the jail. To allow management of the dataset from within a jail, the jailed property has to be set and the jail needs access to the /dev/zfs device. The quota property cannot be changed from within a jail. See jail(8) for information on how to allow mounting ZFS datasets from within a jail. A Tn ZFS dataset can be detached from a jail using the Cm unjail subcommand. After a dataset is attached to a jail and the jailed property is set, a jailed file system cannot be mounted outside the jail, since the jail administrator might have set the mount point to an unacceptable value
zfs-mount(8)
Manage mount state of ZFS file systems
MPI_Alltoallv(3)
Sends data from all to all processes; each process may send a different amount of data and provide displacements for the input and output data
MPI_Cart_shift(3)
Returns the shifted source and destination ranks, given a shift direction and amount
MPI_Ialltoallv(3)
Sends data from all to all processes in a nonblocking way; each process may send a different amount of data and provide displacements for the input and output data
MPI_Pack_external_size(3)
Returns the upper bound on the amount of space needed to pack a message using MPI_Pack_external
MPI_Pack_size(3)
Returns the upper bound on the amount of space needed to pack a message
RkMountDic(3)
mount a dictionary in the dictionary list
RkRemountDic(3)
modify the priority order of a dictionary already in the dictionary list
RkUnmountDic(3)
unmount a dictionary from the dictionary list
SP_equal_group_ids(3)
checks amount of data ready to be read
SP_poll(3)
checks amount of data ready to be read
TclZipfs_AppHook.tcl87(3), TclZipfs_AppHook(3), Tclzipfs_Mount(3), TclZipfs_MountBuffer(3), Tclzipfs_Unmount(3)
handle ZIP files as Tcl virtual filesystems
Tcl_AllocStatBuf.tcl85(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl87(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
afuse(1), AFUSE(1)
automounting file system implemented in user-space using FUSE
amd(8)
automatically mount file systems
amq(8)
automounter query tool
archivemount(1)
mounts an archive for access as a file system
automount2amd(8)
converts old Sun automount maps to Amd maps
automounter(8)
Dynamically configure amd for existing devices
automounter.conf(5)
Define runtime parameters for automounter
bdemount(1)
mounts a BitLocker Drive Encryption (BDE) encrypted volume
bindfs(1)
(hy mount --bind in user-space
codechanges(1)
computes the amount of code changes between two code trees or single files
curlftpfs(1)
mount a ftp host as a local directory
encfs(1)
mounts or creates an encrypted virtual filesystem
encfssh(1)
mount encrypted virtual filesystem and start shell Write in progress
ewfmount(1)
mount data stored in EWF files
explain_mount(3)
explain mount(2) errors require_index { }
explain_mount_or_die(3)
mount file system and report errors require_index { "mount file system and report errors" }
fixmount(8)
fix remote mount entries
freecolor(1)
Display amount of free and used memory graphically
fs_mount(3), fs_unmount(3)
simplified file system mounting
fsapfsmount(1)
mounts an Apple File System (APFS) volume
fvdemount(1)
mounts a FileVault Drive Encrypted (FVDE) volume
gitsubmodules(7)
Mounting one repository inside another
gs-mount(1)
Secure filesystem client through via Global Socket
gsleep(1), sleep(1)
delay for a specified amount of time
hmount(1)
introduce a new HFS volume and make it current
humount(1)
remove an HFS volume from the list of known volumes
ideviceimagemounter(1)
Mount disk images on the device
ifuse(1)
Mount directories of an iOS device locally using fuse
luksdemount(1)
mounts a Linux Unified Key Setup (LUKS) Disk Encryption volume
mate-drivemount-applet(1)
Drive Mount Applet for the MATE panel
mdu(1)
display the amount of space occupied by an MSDOS directory '" t TQ \$1 . (is' (if` (pd"
mfsexports.cfg(5)
MooseFS access control for mfsmounts
mfsmount(1)
mount Lizard File System
mfsmount(8)
mount Moose File System
mfsmount.cfg(5)
configuration file for the mfsmount command
mhddfs(1)
The driver combines a several mount points into the single one
mklost+found(8)
create a lost+found directory on a mounted Linux second extended file system
mmount(1)
mount an MSDOS disk '" t TQ \$1 . (is' (if` (pd"
mount.ceph(8)
mount a ceph file system
mount.exfat-fuse(8)
mount an exFAT file system
mount.glusterfs(8)
script to mount native GlusterFS volume
mount.zfs(8)
mount ZFS filesystem
mount_image(1)
Mount a disk image " Convention: " Underline anything that is typed verbatim - commands, etc
mountain(6)
random 3D plots that look vaguely mountainous
mp3fs(1)
mounts and transcodes FLACs to MP3s on the fly
nbdkit-loop(1)
use nbdkit with the Linux kernel client to create loop devices and loop mounts
ntfs-3g.probe(8)
Probe an NTFS volume mountability
ocf_heartbeat_Filesystem(7)
Manages filesystem mounts
pakmount(1)
mount various file formats
panda_setleading(3)
set the amount of space between lines of text
pawd(1)
print automounter working directory
pmemlog_nbyte(3), pmemlog_nbyte()(3)
checks the amount of usable space in the log pool
portsreinstall-chroot-mount(8)
Support utility for portsreinstall(8) to mount and unmount a builder environment at the grand host environment
ppmshift(1)
shift lines of a PPM image left or right by a random amount synopsis
ppmspread(1)
displace a PPM image's pixels by a random amount synopsis
restic-mount(1)
Mount the repository
smrawmount(1)
mount data stored in storage media (split) RAW (image) files
squashfuse(1)
mount a SquashFS archive with FUSE
sun2amd(8)
converts Sun automount maps to Amd maps
triangle(6)
random mountains using iterative subdivision of triangles
vga_claimvideomemory(3)
declare the amount of video memory used
vshadowmount(1)
mounts a Windows NT Volume Shadow Snapshot (VSS) volume
vxmount(1)
Mount a VxFS filesystem
vxmount(1)
Unmount a VxFS filesystem
wimlib-imagex(1)
Extract, create, modify, or mount a WIM archive
wimmount(1), wimmountrw(1), wimunmount(1)
Mount or unmount a WIM image
xfs(5)
layout, mount options, and supported file attributes for the XFS filesystem
xfs-fuse(1)
Mount an XFS filesystem
xmountains(6)
A fractal landscape generator
zfs-mount(8)
manage mount state of ZFS filesystems
zfs-mount-generator(8)
generate systemd mount units for ZFS filesystems
zipfs.tcl87(n), zipfs(n)
Mount and work with ZIP files within Tcl
zsd(8)
Quickly destroys a specified amount of ZFS snapshots
9p(3), Srv(3), dirread9p(3), emalloc9p(3), erealloc9p(3), estrdup9p(3), postfd(3), postmountsrv(3), readbuf(3), readstr(3), respond(3), srv(3), threadpostmountsrv(3), walkandclone(3)
9P file service
9pclient(3), CFid(3), CFsys(3), fsinit(3), fsmount(3), fsroot(3), fssetroot(3), fsunmount(3), nsinit(3), nsmount(3), fsversion(3), fsauth(3), fsattach(3), fsclose(3), fscreate(3), fsfcreate(3), fsremove(3), fsfremove(3), fsaccess(3), fsdirread(3), fsdirreadall(3), fsdirstat(3), fsdirfstat(3), fsdirwstat(3), fsdirfwstat(3), fsopen(3), fsfopen(3), nsopen(3), fsopenfd(3), fspread(3), fspwrite(3), fsread(3), fsreadn(3), fsseek(3), fswrite(3), fsprint(3), fsvprint(3)
9P client library
9pfuse(4)
mount 9P service via FUSE
Brackup::Mount(3)
Mount a backup as a usable filesystem using FUSE
Brackup::Target::Filesystem(3)
backup to a locally mounted filesystem
Dumbbench(3)
More reliable benchmarking with the least amount of thinking
Form::Sensible::Field::LongText(3)
Field for representing large amounts of character-string data
MPI_Allgatherv(3), MPI_Iallgatherv(3)
Gathers data from all processes and delivers it to all. Each process may contribute a different amount of data
MPI_Alltoallv(3), MPI_Ialltoallv(3)
All processes send different amount of data to, and receive different amount of data from, all processes
MPI_Cart_shift(3), MPI_Cart_shift (3)
Returns the shifted source and destination ranks, given a shift direction and amount
MPI_File_preallocate(3)
Preallocates a specified amount of storage space at the beginning of a file (collective)
MPI_Gatherv(3), MPI_Igatherv(3)
Gathers varying amounts of data from all processes to the root process
MPI_Neighbor_allgatherv(3), MPI_Ineighbor_allgatherv(3)
Gathers and distributes data from and to all neighbors. Each process may contribute a different amount of data
MPI_Neighbor_alltoallv(3), MPI_Ineighbor_alltoallv(3)
All processes send different amounts of data to, and receive different amounts of data from, all neighbors
MPI_Pack_size(3)
Returns the upper bound on the amount of space needed to pack a message
Mojolicious::Plugin::Mount(3)
Application mount plugin
Moose::Policy(3)
Moose-mounted police
Oryx::Value::Binary(3)
Values containing large amounts of binary data
Oryx::Value::Text(3)
Values containing large amounts of text data
Paws::EFS::CreateMountTarget(3)
Arguments for method CreateMountTarget on Paws::EFS
Paws::EFS::DeleteMountTarget(3)
Arguments for method DeleteMountTarget on Paws::EFS
Paws::EFS::DescribeMountTargetSecurityGroups(3)
Arguments for method DescribeMountTargetSecurityGroups on Paws::EFS
Paws::EFS::DescribeMountTargets(3)
Arguments for method DescribeMountTargets on Paws::EFS
Paws::EFS::ModifyMountTargetSecurityGroups(3)
Arguments for method ModifyMountTargetSecurityGroups on Paws::EFS
Squatting::With::Mount(3)
mount Squatting apps at arbitrary paths
Unix::AutomountFile(3)
Perl interface to automounter files
auth(3), auth_proxy(3)
fauth_proxy, auth_allocrpc, auth_freerpc, auth_rpc, auth_getkey, amount_getkey, auth_freeAI, auth_chuid, auth_challenge, auth_response, auth_freechal, auth_respond, auth_userpasswd, auth_getuserpasswd, auth_getinfo, fsauth_proxy, fsfauth_proxy, fsamount, nsamount- routines for authenticating users
brackup-mount(1)
mount a backup as a filesystem using FUSE
bup-fuse(1)
mount a bup repository as a filesystem
huge-count.pl(1)
Count all the bigrams in a huge text without using huge amounts of memory
kitty.conf(5)
kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2. You can reload the config file within kitty by pressing %ctrl+shift+f5 or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing the %ctrl+shift+f6 key. kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the kitty --config option or use the KITTY_CONFIG_DIRECTORY environment variable. See the kitty --config option for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. For example: 0.0 3.5 C include other.conf P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty list-fonts command. By default they are derived automatically, by the OSes font system. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words "HELLO WORLD" display in kitty as "WORLD HELLO", and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 adjust_line_height, adjust_column_width 0.0 3.5 C adjust_line_height 0 adjust_column_width 0 P Change the size of each character cell kitty renders. You can use either numbers, which are interpreted as pixels or percentages (number followed by %), which are interpreted as percentages of the unmodified values. You can use negative pixels or percentages less than 100% to reduce sizes (but this might cause rendering artifacts). 0.0 adjust_baseline 0.0 3.5 C adjust_baseline 0 P Adjust the vertical alignment of text (the height in the cell at which text is positioned). You can use either numbers, which are interpreted as pixels or a percentages (number followed by %), which are interpreted as the percentage of the line height. A positive value moves the baseline up, and a negative value moves them down. The underline and strikethrough positions are adjusted accordingly. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. symbol_map itself can be specified multiple times. Syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features setting. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code Retina includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code Retina also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %Harfbuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, these are read from the FontConfig database first and then this, setting is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty + list-fonts --psnames: 0.0 3.5 C $ kitty + list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero: 0.0 3.5 C font_features FiraCode-Retina +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P Change the sizes of the lines used for the box drawing unicode characters These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P Choose the color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of (block, beam, underline). Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P Defines the thickness of the beam cursor (in pts) 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P Defines the thickness of the underline cursor (in pts) 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval (in seconds) at which to blink the cursor. Set to zero to disable blinking. Negative values mean use system default. Note that numbers smaller than %repaint_delay will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size, used only for browsing the scrollback buffer (in MB). This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII text, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Modify the amount scrolled by the mouse wheel. Note this is only used for low precision scrolling devices, not for high precision scrolling on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Modify the amount scrolled by a touchpad. Note this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. url_style can be one of: none, single, double, curly 0.0 open_url_with 0.0 3.5 C open_url_with default P The program with which to open URLs that are clicked on. The special value default means to use the operating system(aqs default URL handler. 0.0 url_prefixes 0.0 3.5 C url_prefixes http https file ftp gemini irc gopher mailto news git P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, simply selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selections. You can instead specify a name such as a1 to copy to a private kitty buffer instead. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C map cmd+shift+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the unicode database will be matched. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
mogautomount(1)
automatically discover and mount MogileFS disks
mount(1), unmount(1)
change name space
plumb(3), eplumb(3), plumbfree(3), plumbopen(3), plumbunmount(3), plumbopenfid(3), plumbsend(3), plumbsendtofid(3), plumbsendtext(3), plumblookup(3), plumbpack(3), plumbpackattr(3), plumbaddattr(3), plumbdelattr(3), plumbrecv(3), plumbrecvfid(3), plumbunpack(3), plumbunpackpartial(3), plumbunpackattr(3), Plumbmsg (3)
plumb messages
read_mail_log(3), read_mail_log.pl(3)
-- Summarizes amount of mail routed through host, sorted by e-mail address
tapefs(4), 32vfs(4), cpiofs(4), tapfs(4), tarfs(4), tpfs(4), v6fs(4), v10fs(4), zipfs(4)
mount archival file systems
timed-process(1)
Run background process for limited amount of time
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
vbackup(8), vcat(8), vftp(8), vmount(8), vnfs(8)
back up Unix file systems to Venti
home | help