Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
FD_CLR(3), select(3)
synchronous I/O multiplexing
atse(4)
driver for the Altera Triple-Speed Ethernet MegaCore
bluetooth.protocols(5)
Bluetooth Protocol Service Multiplexor database
bthost(1)
look up Bluetooth host names and Protocol Service Multiplexor values
dpv(1)
stream data from stdin or multiple paths with dialog progress view
fdt_pinctrl(4)
FDT I/O pin multiplexing support
fma(3), fmaf(3), fmal(3)
fused multiply-add
ibv_rate_to_mult(3)
convert IB rate enumeration to multiplier of 2.5 Gbit/sec mult_to_ibv_rate - convert multiplier of 2.5 Gbit/sec to an IB rate enumeration
iicmux(4)
I2C bus mulitiplexer framework
ipl(4)
IP packet log device
ipmon(8)
monitors /dev/ipl for logged packets
kbdmux(4)
keyboard multiplexer
ldexp(3), ldexpf(3), ldexpl(3)
multiply floating-point number by integral power of 2
libmp(3)
traditional BSD multiple precision integer arithmetic library
ng_gif_demux(4)
demultiplexer for packets from ng_gif(4) nodes
ng_h4(4)
Netgraph node type that is also an H4 line discipline
ng_one2many(4)
packet multiplexing netgraph node type
phttpget(8)
retrieve multiple files via pipelined HTTP
poll(2)
synchronous I/O multiplexing
pselect(2)
synchronous I/O multiplexing a la POSIX.1g
resolvconf(8)
a framework for managing multiple DNS configurations
sctp_connectx(3)
connect an SCTP socket with multiple destination addresses
select(2)
synchronous I/O multiplexing
strpbrk(3)
locate multiple characters in string
termios(4)
general terminal line discipline
xo_emit_err(3), xo_emit_errc(3), xo_emit_errx xo_emit_warn(3), xo_emit_warnx(3), xo_emit_warn_c(3), xo_emit_warn_hc(3)
emit errors and warnings in multiple output styles
xo_err(3), xo_errc(3), xo_errx xo_warn(3), xo_warnx(3), xo_warn_c(3), xo_warn_hc(3)
emit errors and warnings in multiple output styles
xo_error(3)
generate simple error messages in multiple output styles
xo_message(3), xo_message_c(3), xo_message_hc(3), xo_message_hcv(3)
emit messages in multiple output styles
BN_mod_mul_montgomery(3), BN_MONT_CTX_new(3), BN_MONT_CTX_free(3), BN_MONT_CTX_set(3), BN_MONT_CTX_copy(3), BN_from_montgomery(3), BN_to_montgomery(3)
Montgomery multiplication
BN_mod_mul_reciprocal(3), BN_div_recp(3), BN_RECP_CTX_new(3), BN_RECP_CTX_free(3), BN_RECP_CTX_set(3)
modular multiplication using reciprocal
"glMultMatrixd(3), glMultMatrixf(3)
multiply the current matrix with the specified matrix
"glRotated(3), glRotatef(3)
multiply the current matrix by a rotation matrix
"glScaled(3), glScalef(3)
multiply the current matrix by a general scaling matrix
"glTranslated(3), glTranslatef(3)
multiply the current matrix by a translation matrix
AG_DriverMw(3)
agar multiple-window driver class
AG_MPane(3)
agar multiple paned view widget
BN_mod_mul_montgomery(3), BN_MONT_CTX_new(3), BN_MONT_CTX_free(3), BN_MONT_CTX_set(3), BN_MONT_CTX_copy(3), BN_from_montgomery(3), BN_to_montgomery(3)
Montgomery multiplication
BN_mod_mul_montgomery(3ossl), BN_MONT_CTX_new(3ossl), BN_MONT_CTX_free(3ossl), BN_MONT_CTX_set(3ossl), BN_MONT_CTX_copy(3ossl), BN_from_montgomery(3ossl), BN_to_montgomery(3ossl)
Montgomery multiplication
BN_mod_mul_reciprocal(3), BN_div_recp(3), BN_RECP_CTX_new(3), BN_RECP_CTX_free(3), BN_RECP_CTX_set(3)
modular multiplication using reciprocal
BN_mod_mul_reciprocal(3ossl), BN_div_recp(3ossl), BN_RECP_CTX_new(3ossl), BN_RECP_CTX_free(3ossl), BN_RECP_CTX_set(3ossl)
modular multiplication using reciprocal
BSb_backward(3)
Backward triangular matrix multiplication on a block of vectors
BSb_forward(3)
Forward triangular matrix multiplication on a block of vectors
BSbackward(3)
Backward triangular matrix multiplication on a single vector
BSbackward1(3)
Backward triangular matrix multiplication on a single vector
BSforward(3)
Forward triangular matrix multiplication on a single vector
BSforward1(3)
Forward triangular matrix multiplication on a single vector
BSsetup_block(3)
Change the setup for triangular matrix multiplication to allow for multiple vectors
BStri_mult(3)
Multiply the matrix (A - shift*B) by a block of vectors
BStri_solve(3)
Multiply the matrix A(-1) by a block of vectors
CURLMOPT_PIPELINING(3)
enable HTTP pipelining and multiplexing
CURLOPT_PIPEWAIT(3)
wait for pipelining/multiplexing
DPGEN_MUX2(3)
Multiplexer Macro-Generator
DPGEN_NMUX2(3)
Multiplexer Macro-Generator
Dpkg::Deps::Multiple(3perl)
base module to represent multiple dependencies
FcMatrixMultiply(3)
Multiply matrices
HPL_lmul(3)
multiplies 2 long positive integers
MPI_Comm_spawn_multiple(3)
short description
SDLmm_todo(3), todo(3)
Todo List "Class SDLmm::SRect " 1c Extend the class with useful utility functions in regards to rectangles like intersections. "Class SDLmm::Surface " 1c Implement a better constructor scheme, where the first argument is a dummy class which specified what to do. This would allow a construct where a surface can be loaded from an image file without first having to create an unitialized object. "Class SDLmm::VideoInfo " 1c Build a status function allowing for easier access to the flags. This can be done using a bitfield which would allow for checking for multiple features at once
Tcl_CreateAlias.tcl85(3), Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateSlave(3), Tcl_GetSlave(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3)
manage multiple Tcl interpreters, aliases and hidden commands
Tcl_CreateAlias.tcl86(3), Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateChild(3), Tcl_CreateSlave(3), Tcl_GetChild(3), Tcl_GetSlave(3), Tcl_GetParent(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3)
manage multiple Tcl interpreters, aliases and hidden commands
Tcl_CreateAlias.tcl87(3), Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateChild(3), Tcl_CreateSlave(3), Tcl_GetChild(3), Tcl_GetSlave(3), Tcl_GetParent(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3)
manage multiple Tcl interpreters, aliases and hidden commands
XmDropSiteEndUpdate(3)
A Drag and Drop function that facilitates processing updates to multiple drop sites "XmDropSiteEndUpdate" "Drag and Drop functions" "XmDropSiteEndUpdate"
XmDropSiteStartUpdate(3)
A Drag and Drop function that facilitates processing updates to multiple drop sites "XmDropSiteStartUpdate" "Drag and Drop functions" "XmDropSiteStartUpdate"
XmStringGetNextTriple(3)
An XmString function that returns the type, length, and value of the next component in the compound string "XmStringGetNextTriple"
XmStringPeekNextTriple(3)
A function that returns the component type of the next component "XmStringPeekNextTriple"
XmTransferSendRequest(3)
A toolkit function that transfers a MULTIPLE request "XmTransferSendRequest" "toolkit functions" "XmTransferSendRequest"
XmTransferStartRequest(3)
A toolkit function that begins a MULTIPLE transfer "XmTransferStartRequest" "toolkit functions" "XmTransferStartRequest"
XmbDrawText(3), XwcDrawText(3), Xutf8DrawText(3)
draw text using multiple font sets
XtCreateSelectionRequest(3), XtSendSelectionRequest(3), XtCancelSelectionRequest(3)
bundle multiple selection conversion requests into a single request using MULTIPLE target
XtToolkitThreadInitialize(3)
initialize the toolkit for multiple threads
activateCDKMentry(3), activateCDKMentry cleanCDKMentry destroyCDKMentry drawCDKMentry drawCDKMentryField eraseCDKMentry getCDKMentryBox getCDKMentryFillerChar getCDKMentryHiddenChar getCDKMentryMin getCDKMentryValue injectCDKMentry moveCDKMentry newCDKMentry positionCDKMentry setCDKMentry setCDKMentryBackgroundAttrib setCDKMentryBackgroundColor setCDKMentryBox setCDKMentryBoxAttribute setCDKMentryCB setCDKMentryFillerChar setCDKMentryHiddenChar setCDKMentryHorizontalChar setCDKMentryLLChar setCDKMentryLRChar setCDKMentryMin setCDKMentryPostProcess setCDKMentryPreProcess setCDKMentryULChar setCDKMentryURChar setCDKMentryValue setCDKMentryVerticalChar cdk_mentry(3)
curses multiple line entry widget
alimask(1)
calculate and add column mask to a multiple sequence alignment
amfetchdump(8)
extract backup images from multiple Amanda tapes
apertium-multiple-translations(1)
multi-translation output program for Apertium
apply_matrix(3), apply_matrix_f(3)
Multiplies a point by a transformation matrix. Allegro game programming library
apply_quat(3)
Multiplies a point by a quaternion. Allegro game programming library
blind-set-alpha(1)
Multiply the alpha channel of a video
blind-set-luma(1)
Multiply the luminosity of a video
blind-set-saturation(1)
Multiply the saturation of a video
blind-split(1)
Split a video, by frame, into multiple videos
carousel(6)
displays multiple images rotating in a circular formation
cert2spc(1)
Transform multiple X.509 certificates to a Software Publisher Certificate
cg_merge(1)
merges multiple Cachegrind output files into one
choose(3)
performs one of multiple channel operations
cmbuild(1)
construct covariance model(s) from structurally annotated RNA multiple sequence alignment(s)
combinedeltarpm(8), combindeltarpm(8)
combine multiple deltarpms to a single one
config.guess-2.69(1)
guess the build system triplet
config.sub-2.69(1)
validate and canonicalize a configuration triplet
convertbddmuxabl(3)
converts two bdd nodes to an abl multiplexor expression. man1/alc_origin.1
crack-attack(6)
multiplayer OpenGL puzzle game like "Tetris Attack"
create_bmp_for_stripline_coupler(1)
bitmap generator for coupler with thin striplines between two infinitely wide groundplanes (part of atlc)
create_bmp_for_symmetrical_stripline(1)
bitmap generator for thin conductor between two infinite groundplanes (part of atlc)
ddv(1)
DeuxD-Viewer for multiple sequence alignment
dirsplit(1)
splits directory into multiple with equal size
dmidiplayer(1)
[em] Plays MIDI, Karaoke and Cakewalk Files
dnstable_merge(1)
merge multiple dnstable data files together
doinkd(8)
Idle terminal and multiple login monitor daemon
doveadm-batch(1)
Execute multiple commands for multiple users
drumstick-guiplayer(1)
A Drumstick GUI utility for playing MIDI files
enable_triple_buffer(3)
Enables triple buffering. Allegro game programming library
encapsulate(1)
multiplex several channels over a single socket with sampling of remote process exit status, and provide conversation termination without closing the socket. netpipes 4.2
ex3buf(3)
Mode-X triple buffering and retrace interrupt simulation. Allegro game programming library
expect_multixterm(1), multixterm(1)
drive multiple xterms separately or together
expect_passmass(1), passmass(1)
change password on multiple machines
expect_xkibitz(1), xkibitz(1)
allow multiple people to interact in an xterm
explain_readv_or_die(3)
read data into multiple buffers and report errors require_index { "read data into multiple buffers and report errors" }
explain_writev_or_die(3)
write data from multiple buffers and report errors require_index { "write data from multiple buffers and report errors" }
extipl(8)
a partition-selectable boot loader/installer for IBM-PC compatible computers
extract_mpeg2(1)
extract MPEG video streams from a multiplexed stream
fasta36(1)
scan a protein or DNA sequence library for similar sequences fastx36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfastx36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasty36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfasty36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasts36 - compare unordered peptides to a protein sequence database fastm36 - compare ordered peptides (or short DNA sequences) to a protein (DNA) sequence database tfasts36 - compare unordered peptides to a translated DNA sequence database fastf36 - compare mixed peptides to a protein sequence database tfastf36 - compare mixed peptides to a translated DNA sequence database ssearch36 - compare a protein or DNA sequence to a sequence database using the Smith-Waterman algorithm. ggsearch36 - compare a protein or DNA sequence to a sequence database using a global alignment (Needleman-Wunsch) glsearch36 - compare a protein or DNA sequence to a sequence database with alignments that are global in the query and local in the database sequence (global-local). lalign36 - produce multiple non-overlapping alignments for protein and DNA sequences using the Huang and Miller sim algorithm for the Waterman-Eggert algorithm. prss36, prfx36 - discontinued; all the FASTA programs will estimate statistical significance using 500 shuffled sequence scores if two sequences are compared
fastnetmon(1), FastNetMon(1)
a high performance DoS/DDoS load analyzer built on top of multiple packet capture engines
fdnsiplist(1)
resolve a hostname to a list of IPv4 addresses
fi_poll(3)
Polling and wait set operations fi_poll_open / fi_close Open/close a polling set fi_poll_add / fi_poll_del Add/remove a completion queue or counter to/from a poll set. fi_poll Poll for progress and events across multiple completion queues and counters. fi_wait_open / fi_close Open/close a wait set fi_wait Waits for one or more wait objects in a set to be signaled. fi_trywait Indicate when it is safe to block on wait objects using native OS calls. fi_control Control wait set operation or attributes
fixmul(3)
Multiplies two fixed point values together. Allegro game programming library
ftp-test(1)
connect to an ftp server multiple times
fwbuilder(1)
Multiplatform firewall configuration tool
g3cat(1)
concatenate multiple g3 documents
gen-multiple-pysol-layouts(6), gen-multiple-pysol-layouts.(6)
generate multiple PySol / MS initial solitaire deals
get_iplayer(1)
Stream Recording tool and PVR for BBC iPlayer and BBC Sounds
gif2rgb(1)
convert images saved as GIF to 24-bit RGB triplets
git-bulk(1)
Run git commands on multiple repositories
git-worktree(1)
Manage multiple working trees
glFrustum(3), "glFrustum(3)
multiply the current matrix by a perspective matrix
glOrtho(3), "glOrtho(3)
multiply the current matrix with an orthographic matrix
glmaze(6)
multiplayer opengl maze game
gmx-genconf(1)
Multiply a conformation in 'random' orientations rst2man-indent-level 0 1 rstReportMargin \$1
gri_merge(1)
merge multiple Gri output files into a single PostScript file
hardlink(1)
Link multiple copies of a file
hashdeep(1)
Compute, compare, or audit multiple message digests
helper-mux(8)
Concurrency protocol multiplexer for Squid helpers
hmmbuild(1)
construct profiles from multiple sequence alignments
hostgraphs.cgi(1)
CGI program to show multiple graphs
hwloc-assembler(1)
Assemble multiple XML topologies
hwloc-assembler-remote(1)
Assemble multiple remote host topologies
icmpmonitor(1)
multiple host monitoring tool
image_scale_txcos(3), image_scale_txcos (3)
Multiply the current set of texture coordinates uniformly
influx_stress(1)
Runs a stress test against one or multiple InfluxDB servers
iom_add(3)
add event to I/O multiplexer
iom_init(3)
create new I/O multiplexer
iom_wait(3)
wait for event from I/O multiplexer
libmng(3)
Multiple-image Network Graphics (MNG) Reference Library 1.0.9
liboping(3)
Library to send ICMPv4/ICMPv6 echo packets to multiple hosts
libowfat_fmt_strm(3), fmt_strm(3)
write multiple ASCII strings
libowfat_imult16(3), imult16(3)
integer multiplication with overflow checking
libowfat_imult32(3), imult32(3)
integer multiplication with overflow checking
libowfat_imult64(3), imult64(3)
integer multiplication with overflow checking
libowfat_umult16(3), umult16(3)
integer multiplication with overflow checking
libowfat_umult32(3), umult32(3)
integer multiplication with overflow checking
libowfat_umult64(3), umult64(3)
integer multiplication with overflow checking
libzzuf(3)
helper library for the zzuf multiple purpose fuzzer
lightning-multiwithdraw(7)
Command for withdrawing to multiple addresses
lis_array_pmul(3)
multiply each element of a vector by the corresponding element of another
lis_array_pmul(3f)
multiply each element of a vector by the corresponding of another
lis_array_scale(3)
multiply the vector by the scalar
lis_array_scale(3f)
multiply the vector by the scalar
lis_vector_pmul(3)
multiply each element of a vector by the corresponding element of another
lis_vector_scale(3)
multiply the vector by the scalar
lis_vector_scale(3f)
multiply the vector by the scalar
lmerge(1)
lmerge combines multiple transcripts into one
mafft(1)
Multiple alignment program for amino acid or nucleotide sequences
matrix_mul(3), matrix_mul_f(3)
Multiplies two matrices. Allegro game programming library
md-mx-ctrl(8)
Control mimedefang-multiplexor
mergesolv(1)
merge multiple files in solv format into a single one
mimedefang-multiplexor(8)
Process pool controller for mail filters
mimedefang-notify(7)
Conventions used by mimedefang-multiplexor(8) to notify an external program of state changes
minetest(6)
Multiplayer infinite-world block sandbox
minetest(6), minetestserver(6)
Multiplayer infinite-world block sandbox
mmafm(1)
creates AFM font metrics for multiple master fonts '
mmpfb(1)
creates single-master fonts from multiple master fonts '
mmv(1)
move/copy/append/link multiple files by wildcard patterns } {
mng(5)
Multiple-image Network Graphics (MNG) format
mpage(1)
print multiple pages per sheet on PostScript printer
mpb-split(1)
compute eigenmodes with MPB using multiple processes
mpexpr(n)
Evaluate an expression with multiple precision math
mping(8)
send ICMP ECHO_REQUEST packets to multiple network hosts in a round-robbin fashion. Mping support both IPv4 and IPv6 adresses at the same time
mpqc(1)
The Massively Parallel Quantum Chemistry program (MPQC) computes the properties of molecules from first principles. This documentation is divided into the following chapters: "o" 2 MPQC Overview "o" 2 Running MPQC "o" 2 MPQC Input "o" 2 Validating MPQC "o" 2 Running Psi 3 from MPQC "o" 2 CCA Components "o" 2 MPQC License "o" 2 MPQC Warranty
mpxstats(8)
Multiplexing Monitor Statistics daemon
mtbl_fileset(3)
automatic multiple MTBL data file merger
mtbl_merge(1)
merge MTBL data from multiple input files into a single output file
mtbl_merger(3)
merge multiple MTBL data sources into a single output
mtext_get_prop_values(3m17n)
Get multiple values of a text property
mtext_get_properties(3m17n)
Get multiple text properties
mtext_put_prop_values(3m17n)
Set multiple text properties with the same key
multidump(1)
run multiple rtpdumps simultaneously
multiplay(1)
run multiple rtpplays simultaneously
multiwatch(1)
forks and watches multiple instances of a program in the same environment
mysqld_multi(1)
manage multiple MySQL servers
ncid2ncid(1)
NCID to NCID gateway, connect multiple NCID sending servers to a single NCID receiving server
ocf_heartbeat_db2(7)
Resource Agent that manages an IBM DB2 LUW databases in Standard role as primitive or in HADR roles as master/slave configuration. Multiple partitions are supported
oggJoin(1), oggJOIN(1)
multiplexes ogg streams (.ogv, .ogg or oga)
oggSplit(1)
demultiplexes ogv files
oggTranscode(1)
transcodes ogg files in multiple ways
opam-switch(1), opamN'45'switch(1)
N'45' Manage multiple installation prefixesN'46'
pammixmulti(1)
blend together multiple PAM images synopsis
pamstack(1)
stack planes of multiple PAM images into one PAM image synopsis
pbc_merge(1)
Merge multiple Parrot bytecode (PBC) files into a single PBC file
pfsinme(1)
Read image files containing multiple exposures to be merged into an HDR image
pho(1)
View and annotate multiple images
photopile(6)
displays multiple images in a periodically shuffled pile
pnmsplit(1)
split a multi-image PNM file into multiple single-image files
poll_scroll(3)
Checks the status of a scroll request with triple buffering. Allegro game programming library
poster(1)
Scale and tile a postscript image to print on multiple pages
postgresql-relay(8)
multiplex all your databases to one point of origin
psfjoin(1)
Concatenate multiple PC Screen Font files
psfmerge(1)
Merge multiple Unicode PSFs
psnup(1)
multiple pages per sheet
psresize(1)
multiple pages per sheet
pullnews(1)
Pull news from multiple news servers and feed it to another
quat_mul(3)
Multiplies two quaternions. Allegro game programming library
radium(8)
argus record multiplexor
request_scroll(3)
Queues a hardware scroll request with triple buffering. Allegro game programming library
request_video_bitmap(3)
Triple buffering page flip request. Allegro game programming library
rpl(1), rpl (RePLace)(1)
replace strings in multiple files
rspserver(1)
RSerPool Server (PE) for multiple example services
samtools-merge(1), samtools merge(1)
merges multiple sorted files into a single file EX in +\$1 nf ft CR . EE ft fi in
sc_SCElementOp3(3), sc::SCElementOp3(3)
The SCElementOp3 class is very similar to the SCElementOp class except that a triplet of blocks is treated simultaneously
sc_ShmMessageGrp(3), sc::ShmMessageGrp(3)
The ShmMessageGrp class is an implementation of MessageGrp that allows multiple process to be started that communicate with shared memory
seaview(1)
a multiplatform, graphical user interface for multiple sequence alignment and molecular phylogeny
sendfiles(1)
send multiple files by MIME message with nmh
set_color(3)
Sets the specified palette entry to the specified RGB triplet. Allegro game programming library
set_multiply_blender(3)
Enables a multiply blender mode. Allegro game programming library
shmux(1)
Shell Multiplexor
smokeping_master_slave(7)
How to run multiple distributed instances of SmokePing
ssh-multiadd(1)
ssh-add multiple ssh keys with the same passphrase(s) to ssh-agent
sslh(8), sslh(8)
protocol demultiplexer
strmtrim(3)
replace multiple white spaces with single blanks within string
svnmucc(1)
Multiple URL Command Client for Subversion
symux(8)
symon stream multiplexer
tcdemux(1)
demultiplex a program stream
tcextract(1)
read multimedia file from medium, extract or demultiplex requested stream and print to standard output
terminator(1), Terminator(1)
Multiple GNOME terminals in one window
tmate(1)
terminal multiplexer
tmux(1)
terminal multiplexer
tpm2_createpolicy(1), tpm2_createpolicy(1)(1)
Creates simple assertion authorization policies based on multiple PCR indices values across multiple enabled banks
triplane(6), Triplane(6)
a side-scrolling dogfighting game
twinwave(1)
Wraps multiple GTKWave sessions in one window or two synchronized windows
usbmuxd(8)
Expose a socket to multiplex connections from and to iOS devices
vfs_media_harmony(8)
Allow multiple Avid clients to share a network drive
vfs_unityed_media(8)
Allow multiple Avid clients to share a network drive
virtual_oss(8)
daemon to multiplex and demultiplex an OSS device
volpack-MultMatrix(3), vpMultMatrix(3)
multiply the current transformation matrix by another matrix
volpack-Rotate(3), vpRotate(3)
multiply the current transformation matrix by a rotation matrix
volpack-Scale(3), vpScale(3)
multiply the current transformation matrix by a scaling matrix
volpack-Translate(3), vpTranslate(3)
multiply the current transformation matrix by a translation matrix
volpack-Window(3), vpWindow(3)
multiply the projection matrix by a perspective or orthographic matrix
volpack-WindowPHIGS(3), vpWindowPHIGS(3)
multiply the projection matrix by a PHIGS viewing matrix
watch-mimedefang(8)
Keep an eye on mimedefang-multiplexor
watch-multiple-mimedefangs(8), watch-multiple-mimdefangs.tcl(8)
Keep an eye on a cluster of MIMEDefang machines
wavbreaker(1)
A tool to split wave files into multiple chunks
wavmerge(1)
Merge multiple wave files into a single file
wesnothd(6)
Battle for Wesnoth multiplayer network daemon
wimsplit(1)
Split a WIM archive into multiple parts
xmx(1), xmx (1)
an X protocol multiplexor
xo_emit_err(3), xo_emit_errc(3), xo_emit_errx xo_emit_warn(3), xo_emit_warnx(3), xo_emit_warn_c(3), xo_emit_warn_hc(3)
emit errors and warnings in multiple output styles
xo_err(3), xo_errc(3), xo_errx xo_warn(3), xo_warnx(3), xo_warn_c(3), xo_warn_hc(3)
emit errors and warnings in multiple output styles
xo_error(3)
generate simple error messages in multiple output styles
xo_message(3), xo_message_c(3), xo_message_hc(3), xo_message_hcv(3)
emit messages in multiple output styles
xpilot(6)
XPilot multiplayer gravity war game client
xpilot-ng-server(6)
server for multiplayer space war game
xpilots(6)
XPilot multiplayer gravity war game server
xs_poll(3)
input/output multiplexing
zip_source_buffer_fragment(3), zip_source_buffer_fragment_create(3)
create zip data source from multiple buffer
zmq_poll(3)
input/output multiplexing
zmq_poller(3)
input/output multiplexing
zzuf(1)
multiple purpose fuzzer
9pserve(4)
announce and multiplex 9P service
Ace::Sequence::Multi(3)
Combine Feature Tables from Multiple Databases
Acme::MetaSyntactic::MultiList(3)
Base class for themes with multiple lists
Alarm::Concurrent(3)
Allow multiple, concurrent alarms
Alarm::Queued(3)
Allow multiple, queued alarms
AnyDBM_File(3)
provide framework for multiple DBMs NDBM_File, DB_File, GDBM_File, SDBM_File, ODBM_File - various DBM implementations
App::GitGot(3)
A tool to make it easier to manage multiple git repositories
App::Yath::Command::projects(3)
Run tests for multiple projects
Astro::Coord::ECI::Mixin(3)
Provide common methods without multiple inheritance
Badger::Codec::Chain(3)
encode/decode data using multiple codecs
Bio::AlignIO::maf(3)
Multiple Alignment Format sequence input stream
Bio::AlignIO::proda(3)
proda sequence input/output stream This provides the basic capabilities to parse the output alignments from the ProDA multiple sequence alignment program (http://proda.stanford.edu)
Bio::IdCollectionI(3)
interface for objects with multiple identifiers
Bio::Index::EMBL(3)
Interface for indexing (multiple) EMBL/Swissprot .dat files (i.e. flat file EMBL/Swissprot format)
Bio::Index::Fasta(3)
Interface for indexing (multiple) fasta files
Bio::Index::Fastq(3)
Interface for indexing (multiple) fastq files
Bio::Index::Qual(3)
Interface for indexing (multiple) fasta qual files
Bio::Location::Split(3)
Implementation of a Location on a Sequence which has multiple locations (start/end points)
Bio::Location::SplitLocationI(3)
Abstract interface of a Location on a Sequence which has multiple locations (start/end points)
Bio::NEXUS::Tools::NexPlotter(3), nexplot.pl(3)
PostScript plot of tree + data table (from NEXUS infile) =head1 SYNOPSIS nexplot.pl [options] foo.nex [tree_name] > foo.ps =head1 OPTIONS -h Brief help message -d Full documentation -v Verbose mode -V Print version information and quit -f Specify output file (default: STDOUT) INFORMATION TO DISPLAY -b Turn on bootstrap values, if any -i Turn on internal node labeling -t Tree only (ignore any characters) -I Specify character block (by "Title") to be used in matrix (e.g. "dna", "protein", "intron") -m Matrix only (ignore any trees) -c Cladogram mode: (auto if no branch lengths present in tree) normal: all branch lengths equal accelerated: same as normal except OTUs are aligned at end -U Display taxa sets in color (-U "set1 color1 [set2 color2 ...]") Color options are red, orange, green, forest, aqua, blue, purple, pink, brown, gray, black PLOT FORMATTING -r Right-justify labels (default: left-justified) -C Columns of characters per block (default = 10) -T Specify tree width (longest branch; default: 10") -S Spacing (vertically) between OTUs (default: .25") -R Ratio of font height to Spacing (default: 0.8; rec: 0.5-1) -F Font to use for labels and titles -B Draw a box indicating postscriptes bounds of the plot area -g Include gray lines after OTU labels, even if -t (tree only) option is used PAGE SETUP -s Print on multiple pages, but shrink to page height -o Print on multiple pages at actual size -W Specify output page width (default: 8.5") -H Specify output page height (default: 11") -a Change page dimensions to fit plot =head1 DESCRIPTION B<This program> will read a NEXUS file and output a PostScript display of trees (one file for each tree in the tree block), as well as any character matrix (e.g. sequences) if present in the file. =head1 FILES =over 4 =back =head1 VERSION $Id: NexPlotter.pm,v 1.2 2008/06/16 19:53:41 astoltzfus Exp $
Bio::SimpleAlign(3)
Multiple alignments held as a set of sequences
Bio::Tools::Run::Alignment::Amap(3)
Object for the calculation of an iterative multiple sequence alignment from a set of unaligned sequences or alignments using the Amap (2.0) program
Bio::Tools::Run::Alignment::Kalign(3)
Object for the calculation of an iterative multiple sequence alignment from a set of unaligned sequences or alignments using the KALIGN program
Bio::Tools::Run::Alignment::Lagan(3)
Object for the local execution of the LAGAN suite of tools (including MLAGAN for multiple sequence alignments)
Bio::Tools::Run::Alignment::MSAProbs(3)
Object for the calculation of a multiple sequence alignment (MSA) from a set of unaligned sequences using the MSAProbs program
Bio::Tools::Run::Alignment::Muscle(3)
Object for the calculation of an iterative multiple sequence alignment from a set of unaligned sequences or alignments using the MUSCLE program
Bio::Tools::Run::Alignment::Probalign(3)
Object for the calculation of a multiple sequence alignment from a set of unaligned sequences or alignments using the Probalign program
Bio::Tools::Run::Alignment::Probcons(3)
Object for the calculation of an iterative multiple sequence alignment from a set of unaligned sequences or alignments using the Probcons program
Bio::Tools::Run::Alignment::Proda(3)
Object for the calculation of sets of multiple sequence alignments from a set of unaligned sequences or alignments using the Proda program
Bio::Tools::Run::Phylo::LVB(3)
Object for using the LVB program to create an array of Bio::Tree objects from a nucleotide multiple alignment file or a nucleotide SimpleAlign object. Works with LVB version 2.1
Bio::Tools::Run::Phylo::Phylip::ProtPars(3)
Object for creating a Bio::Tree object from a multiple alignment file or a SimpleAlign object 14 Nov 2002 Shawn Works with Phylip version 3.6
Bio::Tools::Run::Simprot(3)
Wrapper around the Simprot program. Wrapper for the calculation of a multiple sequence alignment from a phylogenetic tree
Blog::Spam::Plugin::lotsaurls(3)
Reject comments containing multiple URLs
CSP(3)
A wrapper around OpenSSL for maintaining multiple Certificate Authorities
Cache::Memcached::Managed::Multi(3)
multiple Cache::Memcache::Managed objects
Catalyst::Authentication::Realm::Progressive(3)
Authenticate against multiple realms
Crypt::Cipher::DES_EDE(3)
Symmetric cipher DES_EDE (aka Triple-DES, 3DES), key size: 192[168] bits
Crypt::DES_EDE3(3)
Triple-DES EDE encryption/decryption
Crypt::TripleDES(3)
Triple DES encyption
DBD::Multi(3)
Manage Multiple Data Sources with Failover and Load Balancing
DBIx::Class::BitField(3)
Store multiple boolean fields in one integer field
DBIx::Class::Helper::ResultClass::Tee(3)
Inflate to multiple result classes at the same time
DBIx::SearchBuilder::Union(3)
Deal with multiple SearchBuilder result sets as one
Data::ObjectDriver::Driver::Multiplexer(3)
Multiplex multiple partitioned drivers
Data::Remember::Hybrid(3)
a brain for Data::Remember with multiple personalities
Data::Rx::FailureSet(3)
multiple structured failure reports from an Rx checker
Data::Section(3)
read multiple hunks of data out of your DATA section
Devel::Events::Handler::Multiplex(3)
Delegate events to multiple handlers
Dist::Joseki::Cmd::Multiplexable(3)
Base class for potentially project-wide commands
Email::Sender::Failure::Multi(3)
an aggregate of multiple failures
Emplacken(3)
Manage multiple plack apps with a directory of config files
Event::Join(3)
join multiple "events" into one
FCGI::Engine::Manager(3)
Manage multiple FCGI::Engine instances
File::Rename(3)
Perl extension for renaming multiple files
File::Sort(3)
Sort a file or merge sort multiple files
File::Tail::Multi(3), File::Tail::Multi(3)
Perl extension to a stateful tail of multiple files for Unix systems
Form::Sensible::Field::Select(3)
A multiple-choice option field
FurlX::Coro(3)
Multiple HTTP requests with Coro
Games::LMSolve::Tilt::Multi(3)
driver for solving the multiple-goal tilt mazes
Genezzo::BufCa::BCFile(3), Genezzo::BufCa::BCFile.pm(3)
A simple in-memory buffer cache for multiple files for a single process, without locking
Genezzo::PushHash::HPHRowBlk(3), Genezzo::PushHash::HPHRowBlk.pm(3)
a 90% pure virtual class module that extends hierarchical "push hash" Genezzo::PushHash::hph with Row/Block methods. These methods facilitate the construction of classes that manipulate data blocks directly, such as index access methods and functions that split rows over multiple blocks
Geo::Coder::Multiple(3)
Module to tie together multiple Geo::Coder::* modules
Git::Wrapper::Statuses(3)
Multiple git statuses information
HTML::FormFu::Element::Multi(3)
Combine multiple fields in a single element
HTML::FormHandler::Field::Multiple(3)
multiple select list
HTML::FormHandler::Field::SelectCSV(3)
Multiple select field from CSV value
HTML::FormHandler::Field::TextCSV(3)
CSV Text field from multiple
HTTP::Async(3)
process multiple HTTP requests in parallel without blocking
HTTP::Async::Polite(3)
politely process multiple HTTP requests
HTTP::Throwable::Role::Status::MultipleChoices(3)
300 Multiple Choices
Hash::MultiKey(3)
hashes whose keys can be multiple
Hash::MultiValue(3)
Store multiple values per key
IO::MultiPipe(3)
Allows for error checking on a command involving multiple pipes
IO::Multiplex(3)
Manage IO on many file handles
IO::Tee(3)
Multiplex output to multiple output handles
Imager::Preprocess(3)
simple preprocessor for handling multiple sample sizes
Inline::Files(3)
Multiple virtual files at the end of your code
Inline::Files::Virtual(3)
Multiple virtual files in a single file
Input::Validator::Bulk(3)
Internal object for multiple fields processing
JMX::Jmx4Perl::Nagios::SingleCheck(3)
A single nagios check This is an package used internally by JMX::Jmx4Perl::Nagios::CheckJmx4Perl. It encapsulates the configuration for single checks, which can be combined to a bulk JMX-Request so only a single server turnaround is used to obtain multiple checks results at once
Jifty::Action::Record::Bulk(3)
Perform multiple record actions
Jifty::DBI::Collection::Union(3)
Deal with multiple Jifty::DBI::Collection result sets as one
Jifty::Web::Form::Field::Checkboxes(3)
Add a list of checkboxes for multiple-choice selection
KinoSearch1::Analysis::PolyAnalyzer(3)
multiple analyzers in series
KinoSearch1::Search::MultiSearcher(3)
Aggregate results from multiple searchers
Log::Agent::Driver::Fork(3)
dummy driver for forking output to multiple drivers
Log::Dispatch::Vars(3)
Variables used internally by multiple packages
MCE::Stream(3)
Parallel stream model for chaining multiple maps and greps
MPI_Comm_spawn_multiple(3)
Spawns multiple binaries, or the same binary with multiple sets of arguments
Mail::Filter(3)
filter mail through multiple subroutines
Mail::SpamAssassin::SubProcBackChannel(3)
back-channel for communication between a master and multiple slave processes
MasonX::Request::WithMultiSession(3)
Multiple sub-sessions within one "parent" session
Math::GSL::Multifit(3)
Least-squares functions for a general linear model with multiple parameters
Math::Matrix(3)
multiply and invert matrices
Metrics::Any::Adapter::Tee(3), "Metrics::Any::Adapter::Tee"(3)
send metrics to multiple adapters
MogileFS::ReplicationPolicy::MultipleDevices(3)
-- bare-bones replication policy
MogileFS::ReplicationPolicy::MultipleHosts(3)
-- default replication policy
MooX::ConfigFromFile::Role::HashMergeLoaded(3)
allows better merge strategies for multiple config files
MooX::ConfigFromFile::Role::SortedByFilename(3)
allows filename based sort algorithm for multiple config files
MooseX::ClassAttribute::Trait::Role::Composite(3)
A trait that supports applying multiple roles at once
MooseX::MultiInitArg::Attribute(3)
A custom attribute metaclass to add multiple init arguments to your attributes
MooseX::MultiInitArg::Trait(3)
A composable role to add multiple init arguments to your attributes
Multiplex::CMD(3)
Multiplexed Fork Client
Net::Amazon::S3::Operation::Objects::Delete::Request(3)
An internal class to delete multiple objects from a bucket
Net::Amazon::S3::Operation::Objects::Delete::Response(3)
An internal class to handle delete multiple objects responses
Net::BGP::Process(3)
Class encapsulating BGP session multiplexing functionality
Net::CascadeCopy(3)
Rapidly propagate (rsync/scp/...) files to many servers in multiple locations
Net::Google::DataAPI::Auth::ClientLogin::Multiple(3)
keeps and sings auth_params for multiple Google Data API domains
Net::HTTP::Spore::Role(3)
Role to easily add multiples Spore clients to your class
Net::IMAP::Server(3)
A single-threaded multiplexing IMAP server implementation, using Net::Server::Coro
Net::RBLClient(3)
Queries multiple Realtime Blackhole Lists in parallel
Net::SIP::ReceiveChain(3)
handle incoming packet by multiple receivers
Net::Server::Multiplex(3)
Multiplex several connections within one process
Oryx(3)
Meta-Model Driven Object Persistance with Multiple Inheritance
Oryx::Parent(3)
multiple inheritance meta-type for Oryx
PDF::Builder::Resource::XObject::Image::PNG_IPL(3)
support routines for PNG image library (using Image::PNG::Libpng). Inherits from PDF::Builder::Resource::XObject::Image
POE::Component::RSSAggregator(3)
Watch Muliple RSS Feeds for New Headlines
POE::Filter::Stackable(3)
combine multiple POE::Filter objects
Perl::Critic::Policy::Compatibility::ConstantPragmaHash(3)
new enough "constant" module for multiple constants
Perl::Critic::Policy::Modules::ProhibitMultiplePackages(3)
Put packages (especially subclasses) in separate files
Perl::Critic::Policy::Moose::ProhibitMultipleWiths(3)
Require role composition
PerlIO::tee(3)
Multiplex output layer
Perlbal::Plugin::Include(3)
Allows multiple, nesting configuration files
Plack::App::URLMap(3)
Map multiple apps in different paths
Plack::Middleware::NoMultipleSlashes(3)
Remove multiple slashes in your paths automatically
RDF::Notation3::Template::TTriples(3)
a triple generator template
RDF::Notation3::Triples(3)
RDF/N3 generator of triples with prefixes
RDF::Notation3::Triples(3)
RDF/N3 triple generator
RDF::Query::Algebra::Triple(3)
Algebra class for Triple patterns
RDF::Query::BGPOptimizer(3)
Optimizer for ordering the joins of triple patterns in a BGP
RDF::Query::Plan::ComputedStatement(3)
Executable query plan for computed triples
RDF::Query::Plan::Triple(3)
Executable query plan for Triples
RDF::Simple::Parser(3)
convert RDF string to bucket of triples
RDF::Simple::Serialiser(3)
convert a list of triples to RDF
RDF::Trine::Model::Union(3)
Union models for joining multiple stores together
RDF::Trine::Parser::NTriples(3)
N-Triples Parser
RDF::Trine::Parser::Turtle::Constants(3)
Constant definitions for use in parsing Turtle, TriG, and N-Triples
RDF::Trine::Parser::Turtle::Lexer(3)
Tokenizer for parsing Turtle, TriG, and N-Triples
RDF::Trine::Serializer::NTriples(3)
N-Triples Serializer
RDF::Trine::Serializer::NTriples::Canonical(3)
Canonical representation of an RDF model
RDF::Trine::Statement(3)
Class for triples and triple patterns
RDF::Trine::Store(3)
RDF triplestore base class
RDFStore::Parser::NTriples(3)
This module implements a streaming N-Triples parser
RDFStore::Serializer::NTriples(3), RDFStore::Serilizer::NTriples(3)
Serialise a model/graph to W3C RDF Test Cases N-Triples syntax
Reaction::UI::Widget::Field::Container(3)
A field containing multiple values
Regexp::Assemble(3)
Assemble multiple Regular Expressions into a single RE
Regexp::Subst::Parallel(3)
Safely perform multiple substitutions on a string in parallel
Return::MultiLevel(3)
return across multiple call levels
Rose::DB::Object::Manager(3)
Fetch multiple Rose::DB::Object-derived objects from the database using complex queries
SOAP::Lite::Packager(3)
this class is an abstract class which allows for multiple types of packaging agents such as MIME and DIME
SOAP::Packager(3)
this class is an abstract class which allows for multiple types of packaging agents such as MIME and DIME
SPOPS::LDAP::MultiDatasource(3)
-- SPOPS::LDAP functionality but fetching objects from multiple datasources
SQL::Maker::Plugin::InsertMulti(3)
insert multiple rows at once on MySQL
Schedule::Load(3)
Load distribution and status across multiple host machines
TAP::Parser::Multiplexer(3)
Multiplex multiple TAP::Parsers
Test2::Harness::Runner::Constants(3)
Constants shared between multiple runner modules
Text::Pipe::Multiplex(3)
Common text filter API
Tickit::Widget::RadioButton(3), "Tickit::Widget::RadioButton"(3)
a widget allowing a selection from multiple options
Tie::DB_File::SplitHash(3)
Divides a DB_File hash across multiple files
Tie::Hash::MultiValue(3)
store multiple values per key
Validation::Class::Directive::Multiples(3)
Multiples Directive for Validation Class Field Definitions
WWW::Scripter::WindowGroup(3)
Multiple-window browsing environment
XML::Filter::Merger(3)
Assemble multiple SAX streams in to one document
XML::Filter::Tee(3)
Send SAX events to multiple processor, with switching
bot_split(nged)
Split a single BOT primitive, containing disjoint groups of facets, into multiple BOT primitives, one BOT per disjoint group
bup-mux(1)
multiplexes data and error streams over a connection
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.17.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
des(3), setupDESstate(3), des_key_setup(3), block_cipher(3), desCBCencrypt(3), desCBCdecrypt(3), desECBencrypt(3), desECBdecrypt(3), des3CBCencrypt(3), des3CBCdecrypt(3), des3ECBencrypt(3), des3ECBdecrypt(3), key_setup(3), des56to64(3), des64to56(3), setupDES3state(3), triple_block_cipher(3)
single and triple digital encryption standard
for(1)
perform a set of commands multiple times
g.cairocomp(1), g.cairocomp (1)
Overlays multiple X Pixmaps
g.pnmcomp(1), g.pnmcomp (1)
Overlays multiple PPM image files
getmails(1)
wrapper for getmail to access multiple mailboxes
got(1)
A tool to make it easier to manage multiple code repositories using different VCSen
gsh(1)
Global Shell run commands in parallel to multiple machines
huge-merge.pl(1)
Merge the results of multiple huge-sort generated files into a single sorted file
jumpnbump(6)
Cute multiplayer platform game with bunnies
kitty.conf(5)
kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2. You can reload the config file within kitty by pressing %ctrl+shift+f5 or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing the %ctrl+shift+f6 key. kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the kitty --config option or use the KITTY_CONFIG_DIRECTORY environment variable. See the kitty --config option for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. For example: 0.0 3.5 C include other.conf P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty list-fonts command. By default they are derived automatically, by the OSes font system. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words "HELLO WORLD" display in kitty as "WORLD HELLO", and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 adjust_line_height, adjust_column_width 0.0 3.5 C adjust_line_height 0 adjust_column_width 0 P Change the size of each character cell kitty renders. You can use either numbers, which are interpreted as pixels or percentages (number followed by %), which are interpreted as percentages of the unmodified values. You can use negative pixels or percentages less than 100% to reduce sizes (but this might cause rendering artifacts). 0.0 adjust_baseline 0.0 3.5 C adjust_baseline 0 P Adjust the vertical alignment of text (the height in the cell at which text is positioned). You can use either numbers, which are interpreted as pixels or a percentages (number followed by %), which are interpreted as the percentage of the line height. A positive value moves the baseline up, and a negative value moves them down. The underline and strikethrough positions are adjusted accordingly. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. symbol_map itself can be specified multiple times. Syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features setting. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code Retina includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code Retina also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %Harfbuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, these are read from the FontConfig database first and then this, setting is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty + list-fonts --psnames: 0.0 3.5 C $ kitty + list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero: 0.0 3.5 C font_features FiraCode-Retina +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P Change the sizes of the lines used for the box drawing unicode characters These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P Choose the color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of (block, beam, underline). Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P Defines the thickness of the beam cursor (in pts) 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P Defines the thickness of the underline cursor (in pts) 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval (in seconds) at which to blink the cursor. Set to zero to disable blinking. Negative values mean use system default. Note that numbers smaller than %repaint_delay will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size, used only for browsing the scrollback buffer (in MB). This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII text, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Modify the amount scrolled by the mouse wheel. Note this is only used for low precision scrolling devices, not for high precision scrolling on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Modify the amount scrolled by a touchpad. Note this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. url_style can be one of: none, single, double, curly 0.0 open_url_with 0.0 3.5 C open_url_with default P The program with which to open URLs that are clicked on. The special value default means to use the operating system(aqs default URL handler. 0.0 url_prefixes 0.0 3.5 C url_prefixes http https file ftp gemini irc gopher mailto news git P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, simply selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selections. You can instead specify a name such as a1 to copy to a private kitty buffer instead. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C map cmd+shift+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the unicode database will be matched. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
libfb(3)
multiple device, generic frame buffer library
mixin(3)
Mix-in inheritance, an alternative to multiple inheritance
mtm(1)
a micro-terminal multiplexer
muldiv(3), umuldiv(3)
high-precision multiplication and division
mux(3), Mux(3), muxinit(3), muxrpc(3), muxthreads(3)
protocol multiplexor
nomacs(1)
is a free, open source image viewer, which supports multiple platforms
nytprofmerge(1)
Reads multiple NYTProf profiles and outputs a merged one
proc_lib(3)
Functions for asynchronous and synchronous start of processes adhering to the OTP design principles
r.cross(1), r.cross (1)
Creates a cross product of the category values from multiple raster map layers
r.regression.multi(1), r.regression.multi (1)
Calculates multiple linear regression from raster maps
rename(1)
renames multiple files
spamalyze(1)
Apply multiple Realtime Blackhole Lists to all messages in an mbox
stag-splitter.pl(1), stag-splitter(1)
splits a stag file into multiple files
string-repeat(1)
multiply a string
swipl(1)
SWI-Prolog 8.2.3
swipl-ld(1)
Create a SWI-Prolog embedded executable
tstatd(1)
Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
while(1)
perform a command multiple times
home | help