Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PCI_IOV_INIT(9)
enable SR-IOV on a PF device
acct(2)
enable or disable process accounting
accton(8)
enable/disable system accounting
bus_delayed_attach_children(9)
request that the children be attached when interrupts are enabled
config_intrhook(9)
schedule a function to be run after interrupts have been enabled, but before root is mounted
devctl(3), devctl_attach(3), devctl_clear_driver(3), devctl_delete(3), devctl_detach(3), devctl_disable(3), devctl_enable(3), devctl_freeze(3), devctl_rescan(3), devctl_reset(3), devctl_resume(3), devctl_set_driver(3), devctl_suspend(3), devctl_thaw(3)
device control library
device_enable(9), device_disable(9), device_is_enabled(9)
manipulate device enabled flag
feclearexcept(3), fegetexceptflag(3), feraiseexcept(3), fesetexceptflag(3), fetestexcept(3), fegetround(3), fesetround(3), fegetenv(3), feholdexcept(3), fesetenv(3), feupdateenv(3), feenableexcept(3), fedisableexcept(3), fegetexcept(3)
floating-point environment control
feenableexcept(3), fedisableexcept(3), fegetexcept(3)
floating-point exception masking
keyok(3)
enable or disable a keycode
ktrace(1)
enable kernel process tracing
openpam_set_feature(3)
enable or disable an optional feature
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
PCI bus interface
pmc_disable(3), pmc_enable(3)
administrative control of hardware performance counters
pwmbus(9), PWMBUS_CHANNEL_CONFIG(9), PWMBUS_CHANNEL_COUNT(9), PWMBUS_CHANNEL_ENABLE(9), PWMBUS_CHANNEL_GET_CONFIG(9), PWMBUS_CHANNEL_GET_FLAGS(9), PWMBUS_CHANNEL_IS_ENABLED(9), PWMBUS_CHANNEL_SET_FLAGS(9), PWMBUS_GET_BUS(9)
PWMBUS methods
superio(9), superio_devid(9), superio_dev_disable(9), superio_dev_enable(9), superio_dev_enabled(9), superio_find_dev(9), superio_get_dma(9), superio_get_iobase(9), superio_get_irq(9), superio_get_ldn(9), superio_get_type(9), superio_read(9), superio_revid(9), superio_vendor(9), superio_write(9)
Super I/O bus interface
svc_dg_enablecache(3), svc_exit(3), svc_fdset(3), svc_freeargs(3), svc_getargs(3), svc_getreq_common(3), svc_getreq_poll(3), svc_getreqset(3), svc_getrpccaller(3), svc_pollset(3), svc_run(3), svc_sendreply(3)
library routines for RPC servers
SSL_CTX_dane_enable(3), SSL_CTX_dane_mtype_set(3), SSL_dane_enable(3), SSL_dane_tlsa_add(3), SSL_get0_dane_authority(3), SSL_get0_dane_tlsa(3), SSL_CTX_dane_set_flags(3), SSL_CTX_dane_clear_flags(3), SSL_dane_set_flags(3), SSL_dane_clear_flags(3)
enable DANE TLS authentication of the remote TLS server in the local TLS client
SSL_CTX_set_session_cache_mode(3), SSL_CTX_get_session_cache_mode(3)
enable/disable session caching
TLSv1_2_method(3), TLSv1_2_server_method(3), TLSv1_2_client_method(3), SSL_CTX_new(3), SSL_CTX_up_ref(3), SSLv3_method(3), SSLv3_server_method(3), SSLv3_client_method(3), TLSv1_method(3), TLSv1_server_method(3), TLSv1_client_method(3), TLSv1_1_method(3), TLSv1_1_server_method(3), TLSv1_1_client_method(3), TLS_method(3), TLS_server_method(3), TLS_client_method(3), SSLv23_method(3), SSLv23_server_method(3), SSLv23_client_method(3), DTLS_method(3), DTLS_server_method(3), DTLS_client_method(3), DTLSv1_method(3), DTLSv1_server_method(3), DTLSv1_client_method(3), DTLSv1_2_method(3), DTLSv1_2_server_method(3), DTLSv1_2_client_method(3)
create a new SSL_CTX object as framework for TLS/SSL or DTLS enabled functions
ssl_ct_validation_cb(3), SSL_enable_ct(3), SSL_CTX_enable_ct(3), SSL_disable_ct(3), SSL_CTX_disable_ct(3), SSL_set_ct_validation_callback(3), SSL_CTX_set_ct_validation_callback(3), SSL_ct_is_enabled(3), SSL_CTX_ct_is_enabled(3)
control Certificate Transparency policy
"glEnable(3), glDisable(3)
enable or disable server-side GL capabilities
"glEnableClientState(3), glDisableClientState(3)
enable or disable client-side capability
"glEvalCoord1d(3), glEvalCoord1f(3), glEvalCoord2d(3), glEvalCoord2f(3), glEvalCoord1dv(3), glEvalCoord1fv(3), glEvalCoord2dv(3), glEvalCoord2fv(3)
evaluate enabled one- and two-dimensional maps delim $$
BN_set_flags(3), BN_get_flags(3)
enable and inspect flags on BIGNUM objects
CURLMOPT_PIPELINING(3)
enable HTTP pipelining and multiplexing
CURLOPT_SSH_COMPRESSION(3)
enables compression / decompression of SSH traffic
CURLOPT_SSL_ENABLE_ALPN(3)
Application Layer Protocol Negotation
CURLOPT_SSL_ENABLE_NPN(3)
use NPN
DPMSEnable(3)
enables DPMS on the specified display
EVP_RAND(3ossl), EVP_RAND_fetch(3ossl), EVP_RAND_free(3ossl), EVP_RAND_up_ref(3ossl), EVP_RAND_CTX(3ossl), EVP_RAND_CTX_new(3ossl), EVP_RAND_CTX_free(3ossl), EVP_RAND_instantiate(3ossl), EVP_RAND_uninstantiate(3ossl), EVP_RAND_generate(3ossl), EVP_RAND_reseed(3ossl), EVP_RAND_nonce(3ossl), EVP_RAND_enable_locking(3ossl), EVP_RAND_verify_zeroization(3ossl), EVP_RAND_get_strength(3ossl), EVP_RAND_get_state(3ossl), EVP_RAND_get0_provider(3ossl), EVP_RAND_CTX_get0_rand(3ossl), EVP_RAND_is_a(3ossl), EVP_RAND_get0_name(3ossl), EVP_RAND_names_do_all(3ossl), EVP_RAND_get0_description(3ossl), EVP_RAND_CTX_get_params(3ossl), EVP_RAND_CTX_set_params(3ossl), EVP_RAND_do_all_provided(3ossl), EVP_RAND_get_params(3ossl), EVP_RAND_gettable_ctx_params(3ossl), EVP_RAND_settable_ctx_params(3ossl), EVP_RAND_CTX_gettable_params(3ossl), EVP_RAND_CTX_settable_params(3ossl), EVP_RAND_gettable_params(3ossl), EVP_RAND_STATE_UNINITIALISED(3ossl), EVP_RAND_STATE_READY(3ossl), EVP_RAND_STATE_ERROR(3ossl)
EVP RAND routines
EVP_set_default_properties(3ossl), EVP_default_properties_enable_fips(3ossl), EVP_default_properties_is_fips_enabled(3ossl)
Set default properties for future algorithm fetches
FcConfigEnableHome(3)
controls use of the home directory
MPIX_Comm_reenable_anysource(3)
Re-enable the ability to post receives using MPI_ANY_SOURCE on the communicator
OSSL_trace_enabled(3ossl), OSSL_trace_begin(3ossl), OSSL_trace_end(3ossl), OSSL_TRACE_BEGIN(3ossl), OSSL_TRACE_END(3ossl), OSSL_TRACE_CANCEL(3ossl), OSSL_TRACE(3ossl), OSSL_TRACE1(3ossl), OSSL_TRACE2(3ossl), OSSL_TRACE3(3ossl), OSSL_TRACE4(3ossl), OSSL_TRACE5(3ossl), OSSL_TRACE6(3ossl), OSSL_TRACE7(3ossl), OSSL_TRACE8(3ossl), OSSL_TRACE9(3ossl), OSSL_TRACEV(3ossl), OSSL_TRACE_ENABLED(3ossl)
OpenSSL Tracing API
SDL_EnableKeyRepeat(3)
Set keyboard repeat rate
SDL_EnableUNICODE(3)
Enable UNICODE translation
SDL_JoystickEventState(3)
Enable/disable joystick event polling
SSL_CTX_dane_enable(3), SSL_CTX_dane_mtype_set(3), SSL_dane_enable(3), SSL_dane_tlsa_add(3), SSL_get0_dane_authority(3), SSL_get0_dane_tlsa(3), SSL_CTX_dane_set_flags(3), SSL_CTX_dane_clear_flags(3), SSL_dane_set_flags(3), SSL_dane_clear_flags(3)
enable DANE TLS authentication of the remote TLS server in the local TLS client
SSL_CTX_dane_enable(3ossl), SSL_CTX_dane_mtype_set(3ossl), SSL_dane_enable(3ossl), SSL_dane_tlsa_add(3ossl), SSL_get0_dane_authority(3ossl), SSL_get0_dane_tlsa(3ossl), SSL_CTX_dane_set_flags(3ossl), SSL_CTX_dane_clear_flags(3ossl), SSL_dane_set_flags(3ossl), SSL_dane_clear_flags(3ossl)
enable DANE TLS authentication of the remote TLS server in the local TLS client
SSL_CTX_set_session_cache_mode(3), SSL_CTX_get_session_cache_mode(3)
enable/disable session caching
SSL_CTX_set_session_cache_mode(3ossl), SSL_CTX_get_session_cache_mode(3ossl)
enable/disable session caching
SSL_QUIC_METHOD(3ossl), OSSL_ENCRYPTION_LEVEL(3ossl), SSL_CTX_set_quic_method(3ossl), SSL_set_quic_method(3ossl), SSL_set_quic_transport_params(3ossl), SSL_get_peer_quic_transport_params(3ossl), SSL_quic_max_handshake_flight_len(3ossl), SSL_quic_read_level(3ossl), SSL_quic_write_level(3ossl), SSL_provide_quic_data(3ossl), SSL_process_quic_post_handshake(3ossl), SSL_is_quic(3ossl), SSL_get_peer_quic_transport_version(3ossl), SSL_get_quic_transport_version(3ossl), SSL_set_quic_transport_version(3ossl), SSL_set_quic_use_legacy_codepoint(3ossl), SSL_set_quic_early_data_enabled(3ossl)
QUIC support
TCL_MEM_DEBUG.tcl85(3), TCL_MEM_DEBUG(3)
Compile-time flag to enable Tcl memory debugging
TCL_MEM_DEBUG.tcl86(3), TCL_MEM_DEBUG(3)
Compile-time flag to enable Tcl memory debugging
TCL_MEM_DEBUG.tcl87(3), TCL_MEM_DEBUG(3)
Compile-time flag to enable Tcl memory debugging
TLSv1_2_method(3), TLSv1_2_server_method(3), TLSv1_2_client_method(3), SSL_CTX_new(3), SSL_CTX_up_ref(3), SSLv3_method(3), SSLv3_server_method(3), SSLv3_client_method(3), TLSv1_method(3), TLSv1_server_method(3), TLSv1_client_method(3), TLSv1_1_method(3), TLSv1_1_server_method(3), TLSv1_1_client_method(3), TLS_method(3), TLS_server_method(3), TLS_client_method(3), SSLv23_method(3), SSLv23_server_method(3), SSLv23_client_method(3), DTLS_method(3), DTLS_server_method(3), DTLS_client_method(3), DTLSv1_method(3), DTLSv1_server_method(3), DTLSv1_client_method(3), DTLSv1_2_method(3), DTLSv1_2_server_method(3), DTLSv1_2_client_method(3)
create a new SSL_CTX object as framework for TLS/SSL or DTLS enabled functions
TLSv1_2_method(3ossl), TLSv1_2_server_method(3ossl), TLSv1_2_client_method(3ossl), SSL_CTX_new(3ossl), SSL_CTX_new_ex(3ossl), SSL_CTX_up_ref(3ossl), SSLv3_method(3ossl), SSLv3_server_method(3ossl), SSLv3_client_method(3ossl), TLSv1_method(3ossl), TLSv1_server_method(3ossl), TLSv1_client_method(3ossl), TLSv1_1_method(3ossl), TLSv1_1_server_method(3ossl), TLSv1_1_client_method(3ossl), TLS_method(3ossl), TLS_server_method(3ossl), TLS_client_method(3ossl), SSLv23_method(3ossl), SSLv23_server_method(3ossl), SSLv23_client_method(3ossl), DTLS_method(3ossl), DTLS_server_method(3ossl), DTLS_client_method(3ossl), DTLSv1_method(3ossl), DTLSv1_server_method(3ossl), DTLSv1_client_method(3ossl), DTLSv1_2_method(3ossl), DTLSv1_2_server_method(3ossl), DTLSv1_2_client_method(3ossl)
create a new SSL_CTX object as framework for TLS/SSL or DTLS enabled functions
Tcl_LimitAddHandler.tcl85(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
Tcl_LimitAddHandler.tcl86(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
Tcl_LimitAddHandler.tcl87(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
XAddHost(3), XAddHosts(3), XListHosts(3), XRemoveHost(3), XRemoveHosts(3), XSetAccessControl(3), XEnableAccessControl(3), XDisableAccessControl(3), XHostAddress(3), XServerInterpretedAddress(3)
control host access and host control structure
XSynchronize(3), XSetAfterFunction(3)
enable or disable synchronization
XkbChangeEnabledControls(3)
Manipulates the EnabledControls control
XmDropTransferAdd(3)
A Drag and Drop function that enables additional drop transfer entries to be processed after initiating a drop transfer "XmDropTransferAdd" "Drag and Drop functions" "XmDropTransferAdd"
XmTextEnableRedisplay(3)
A Text function that forces the visual update of a Text widget "XmTextEnableRedisplay" "Text functions" "XmTextEnableRedisplay"
XmtLayoutDisableLayout(3), XmtLayoutDisableLayout()(3), XmtLayoutEnableLayout()(3)
temporarily disable layout computation for an XmtLayout widget
XvSelectPortNotify(3)
enable or disable XvPortNotify events
XvSelectVideoNotify(3)
enable or disable VideoNotify events
al_enable_menu_event_source(3)
Allegro 5 API
aranym-jit(1), ARAnyM(1)
Atari Running on Any Machine - JIT enabled
aranym-mmu(1), ARAnyM(1)
Atari Running on Any Machine with 68040 MMU enabled
battmond(1)
monitor battery level on ACPI-enabled (laptop) computers
benchmark_enable(3), benchmark_enable (3)
Toggle the gathering of benchmark data on / off
byobu-enable(1), byobu-disable(1)
wrapper script for enabling/disabling automatic startup of byobu after login into text console
byobu-prompt(1), byobu-enable-prompt(1), byobu-disable-prompt(1)
add and remove a nice color prompt to your shell configuration
cupsdisable(8), cupsenable(8)
stop/start printers and classes
cvswrap(1)
wrapper over cvs to enable fine grained access control to repositories
enable_hardware_cursor(3)
Enables the OS hardware cursor. Allegro game programming library
enable_triple_buffer(3)
Enables triple buffering. Allegro game programming library
enadis.cgi(8)
CGI program to enable/disable Xymon tests
fi_endpoint(3)
Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
fi_mr(3)
Memory region operations fi_mr_reg / fi_mr_regv / fi_mr_regattr Register local memory buffers for direct fabric access fi_close Deregister registered memory buffers. fi_mr_desc Return a local descriptor associated with a registered memory region fi_mr_key Return the remote key needed to access a registered memory region fi_mr_raw_attr Return raw memory region attributes. fi_mr_map_raw Converts a raw memory region key into a key that is usable for data transfer operations. fi_mr_unmap_key Releases a previously mapped raw memory region key. fi_mr_bind Associate a registered memory region with a completion counter or an endpoint. fi_mr_refresh Updates the memory pages associated with a memory region. fi_mr_enable Enables a memory region for use
fi_provider(3), fi_prov_ini(3)
External provider entry point fi_param_define / fi_param_get Register and retrieve environment variables with the libfabric core fi_log_enabled / fi_log_ready / fi_log Control and output debug logging information. fi_open / fi_close Open a named library object fi_export_fid / fi_import_fid Share a fabric object between different providers or resources
fido_dev_enable_entattest(3), fido_dev_toggle_always_uv(3), fido_dev_force_pin_change(3), fido_dev_set_pin_minlen(3)
FIDO 2.1 configuration authenticator API
gc(3), GC_malloc(3), GC_malloc_atomic(3), GC_free(3), GC_realloc(3), GC_enable_incremental(3), GC_register_finalizer(3), GC_malloc_ignore_off_page(3), GC_malloc_atomic_ignore_off_page(3), GC_set_warn_proc(3)
Garbage collecting malloc replacement
gh-workflow-enable(1)
Enable a workflow
git-annex-enable-tor(1)
enable tor hidden service
git-annex-enableremote(1)
enables git-annex to use a remote
git-lfs-clone(1)
Efficiently clone a LFS-enabled repository
glColorMask(3), "glColorMask(3)
enable and disable writing of frame buffer color components
glDepthMask(3), "glDepthMask(3)
enable or disable writing into the depth buffer
glInterleavedArrays(3), "glInterleavedArrays(3)
simultaneously specify and enable several interleaved arrays
glIsEnabled(3), "glIsEnabled(3)
test whether a capability is enabled
glXIsDirect(3), "glXIsDirect(3)
indicate whether direct rendering is enabled
gl_enableclipping(3)
enables clipping
gl_enablepageflipping(3)
enables automatic page flipping
gnutls_anti_replay_enable(3)
API function
gnutls_fips140_mode_enabled(3)
API function
gnutls_heartbeat_enable(3)
API function
gnutls_ocsp_status_request_enable_client(3)
API function
gnutls_session_enable_compatibility_mode(3)
API function
gnutls_session_ticket_enable_client(3)
API function
gnutls_session_ticket_enable_server(3)
API function
icedtea-web(1)
provides a Free Software web browser plugin running applets written in the Java programming language and an implementation of Java Web Start, originally based on the NetX project. NetX allows Java applets and applications to be downloaded over the network, cached, and (by default) run in a secure sandbox environment. Subsequent runs of the applet download the latest version automatically. Update and security settings, among others, can be set using the itw-settings command. icedtea-web also includes a plugin to enable Java applets (http://www.java.com/en/download/testjava.jsp) within web browsers. Names and email addresses of contributors to this project can be found in the file AUTHORS in the IcedTea-Web root directory. The full GPLv2 license of this project can be found in the file COPYING in the IcedTea-Web root directory. News about releases of this project can be found in the file NEWS in the IcedTea-Web root directory
image_framecyclemode(3), image_framecyclemode (3)
Enable/Disable time-triggered active frameset frame cycling
ipmitool(1)
utility for controlling IPMI-enabled devices
keyok(3x)
enable or disable a keycode
knet_handle_crypto_rx_clear_traffic(3)
enable or disable RX processing of clear (unencrypted) traffic
knet_handle_enable_access_lists(3)
Enable or disable usage of access lists (default: off)
knet_handle_enable_filter(3)
install a filter to route packets
knet_handle_enable_pmtud_notify(3)
install a callback to receive PMTUd changes
knet_handle_enable_sock_notify(3)
Register a callback to receive socket events
knet_host_enable_status_change_notify(3)
Install a callback to get host status change events
knet_link_get_enable(3)
Find out whether a link is enabled or not
knet_link_set_enable(3)
Enable traffic on a link
kresd(8)
full caching DNSSEC-enabled Knot Resolver 5.4.1
ksql_trace(3)
enable SQLite logging
libssh2_trace(3)
enable debug info from inside libssh2
llvm-addr2line90(1), llvm-addr2line(1)
a drop-in replacement for addr2line # llvm-addr2line - a drop-in replacement for addr2line ## SYNOPSIS llvm-addr2line [options] ## DESCRIPTION llvm-addr2line is an alias for the [llvm-symbolizer](llvm-symbolizer) tool with different defaults. The goal is to make it a drop-in replacement for GNU(aqs addr2line. Here are some of those differences: 0.0 (bu 2 Defaults not to print function names. Use [-f](llvm-symbolizer-opt-f) to enable that. (bu 2 Defaults not to demangle function names. Use [-C](llvm-symbolizer-opt-C) to switch the demangling on. (bu 2 Defaults not to print inlined frames. Use [-i](llvm-symbolizer-opt-i) to show inlined frames for a source code location in an inlined function. (bu 2 Uses [--output-style=GNU](llvm-symbolizer-opt-output-style) by default. ## SEE ALSO Refer to [llvm-symbolizer](llvm-symbolizer) for additional information
mangohud(1)
enable MangoHud on any application
mod_mono(8)
apache module that enables ASP.NET pages. Works together with mod-mono-server.exe
munin-node-configure(1)
View and modify which plugins are enabled
nagtail(1)
program that enables you to tail a Nagios status logfile
ocf_heartbeat_LinuxSCSI(7)
Enables and disables SCSI devices through the kernel SCSI hot-plug subsystem (deprecated)
ocf_heartbeat_ServeRAID(7)
Enables and disables shared ServeRAID merge groups
pg_checksums(1)
enable, disable or check data checksums in a PostgreSQL database cluster
pitchplay(1)
wrapper script to play audio tracks with cdda2wav with different pitches through a soundcard (cdda2wav must have soundcard support enabled)
pkg-update(8), pkg update(8)
update the local catalogues of the enabled package repositories
pkg_repos(3), pkg_repos_total_count(3), pkg_repos_activated_count(3), pkg_repo_url(3), pkg_repo_ident(3), pkg_repo_name(3), pkg_repo_ident_from_name(3), pkg_repo_key(3), pkg_repo_fingerprints(3), pkg_repo_signature_type(3), pkg_repo_mirror_type(3), pkg_repo_enabled(3), pkg_repo_priority(3), pkg_repo_find_ident(3), pkg_repo_find_name(3)
manipulate repositories
pmempool_feature_query(3), pmempool_feature_query()(3), pmempool_feature_enable()(3), pmempool_feature_disable()(3)
toggle or query pool set features
qenable(8)
enable input to a pbs destination
quorum_trackstart(3)
Enable callbacks notification
rendertarget_noclear(3), rendertarget_noclear (3)
Enable / Disable clearing a rendertarget before a renderpass
set_add_blender(3)
Enables an additive blender mode. Allegro game programming library
set_alpha_blender(3)
Enables a special alpha-channel blending mode. Allegro game programming library
set_burn_blender(3)
Enables a burn blender mode. Allegro game programming library
set_color_blender(3)
Enables a color blender mode. Allegro game programming library
set_difference_blender(3)
Enables a difference blender mode. Allegro game programming library
set_dissolve_blender(3)
Enables a dissolve blender mode. Allegro game programming library
set_dodge_blender(3)
Enables a dodge blender mode. Allegro game programming library
set_hue_blender(3)
Enables a hue blender mode. Allegro game programming library
set_invert_blender(3)
Enables an invert blender mode. Allegro game programming library
set_luminance_blender(3)
Enables a luminance blender mode. Allegro game programming library
set_multiply_blender(3)
Enables a multiply blender mode. Allegro game programming library
set_saturation_blender(3)
Enables a saturation blender mode. Allegro game programming library
set_screen_blender(3)
Enables a screen blender mode. Allegro game programming library
set_trans_blender(3)
Enables a truecolor blender. Allegro game programming library
set_write_alpha_blender(3)
Enables the special alpha-channel editing mode. Allegro game programming library
smp_ena_dis_zoning(8)
invoke ENABLE DISABLE ZONING SMP function
socket_fastopen(3)
enable TCP Fast Open on a server-side TCP socket
ssl_ct_validation_cb(3), SSL_enable_ct(3), SSL_CTX_enable_ct(3), SSL_disable_ct(3), SSL_CTX_disable_ct(3), SSL_set_ct_validation_callback(3), SSL_CTX_set_ct_validation_callback(3), SSL_ct_is_enabled(3), SSL_CTX_ct_is_enabled(3)
control Certificate Transparency policy
ssl_ct_validation_cb(3ossl), SSL_enable_ct(3ossl), SSL_CTX_enable_ct(3ossl), SSL_disable_ct(3ossl), SSL_CTX_disable_ct(3ossl), SSL_set_ct_validation_callback(3ossl), SSL_CTX_set_ct_validation_callback(3ossl), SSL_ct_is_enabled(3ossl), SSL_CTX_ct_is_enabled(3ossl)
control Certificate Transparency policy
syslog-ng-ctl(1)
Display message statistics and enable verbose, debug and trace modes in
termkey_start(3), termkey_stop(3), termkey_is_started(3)
enable or disable terminal operations
tpm2_activatecredential(1), tpm2_activatecredential(1)(1)
Enables access to the credential qualifier to recover the credential secret
tpm2_createpolicy(1), tpm2_createpolicy(1)(1)
Creates simple assertion authorization policies based on multiple PCR indices values across multiple enabled banks
tpm2_hierarchycontrol(1), tpm2_hierarchycontrol(1)(1)
Enable and disable use of a hierarchy and its associated NV storage
tpm2_policyauthvalue(1), tpm2_policyauthvalue(1)(1)
Enables binding a policy to the authorization value of the authorized TPM object
tpm2_policycountertimer(1), tpm2_policycountertimer(1)(1)
Enables policy authorization by evaluating the comparison operation on the TPM parameters time, clock, reset count, restart count and TPM clock safe flag
tpm2_policypassword(1), tpm2_policypassword(1)(1)
Enables binding a policy to the authorization value of the authorized TPM object
tpm2_policysigned(1), tpm2_policysigned(1)(1)
Enables policy authorization by verifying signature of optional TPM2 parameters. The signature is generated by a signing authority
tpm2_policyticket(1), tpm2_ticket(1)(1)
Enables policy authorization by verifying a ticket that represents a validated authorization that had an expiration time associated with it
tpm_setenable(8)
change TPM enable states
urxvt-option-popup(1), option-popup(1)
option menu (enabled by default)
urxvt-readline(1), readline(1)
improve readline editing (enabled by default)
urxvt-searchable-scrollback(1), searchable-scrollback(1)
incremental scrollback search (enabled by default)
urxvt-selection(1), selection(1)
more intelligent selection (enabled by default)
urxvt-selection-popup(1), selection-popup(1)
(enabled by default)
vfs_fake_perms(8)
enable read only Roaming Profiles
vga_runinbackground(3)
enable running of the program while there is no VGA access
vga_setmousesupport(3)
enable mouse support
vga_unlockvc(3)
re-enables virtual console switching
vmod_ip2proxy(3), IP2Proxy Varnish Module(3)
An Varnish module that enables the user to find the country, region, city, ISP and proxy information by IP address. The module reads the proxy information from IP2Proxy BIN data file. This module currently only support Varnish version 6.2. Required IP2Proxy C Library (%https://github.com/ip2location/ip2proxy-c) to work. Please view readme.md for details
volpack-Debug(3), vpSetDebug(3)
enable/disable debugging options
volpack-Enable(3), vpEnable(3)
enable or disable options
votequorum_trackstart(3)
Enable callbacks notification
AMF::Perl(3)
Flash Remoting in Perl Translated from PHP Remoting v. 0.5b from the -PHP project. Main gateway class. This is always the file you call from flash remoting-enabled server scripts
CGI::Application::Plugin::HTDot(3)
Enable "magic dot" notation in CGI::Application-derived applications that use HTML::Template for their templating mechanism
Devel::Confess::Builtin(3)
Enable built in stack traces on exception objects
Devel::StrictMode(3)
determine whether strict (but slow) tests should be enabled
Dist::Metadata::Dir(3)
Enable Dist::Metadata for a directory
Dist::Metadata::Struct(3)
Enable Dist::Metadata for a data structure
Dist::Metadata::Tar(3)
Enable Dist::Metadata for tar files
Dist::Metadata::Zip(3)
Enable Dist::Metadata for zip files
DtEditorEnableRedisplay(3)
force the visual update of a DtEditor widget
GD::SVG(3)
Seamlessly enable SVG output from scripts written using GD
HTTP::MHTTP(3)
this library provides reasonably low level access to the HTTP protocol, for perl. This does not replace LWP (what possibly could :-) but is a cut for speed. It also supports all of HTTP 1.0, so you have GET, POST, PUT, HEAD, and DELETE. Some support of HTTP 1.1 is available - sepcifically Transfer-Encoding = chunked and the Keep-Alive extensions. Additionally - rudimentary SSL support can be compiled in. This effectively enables negotiation of TLS, but does not validate the certificates
Log::Any::IfLOG(3)
Load Log::Any only if "logging is enabled"
Log::Log4perl::InternalDebug(3)
Dark Magic to enable _INTERNAL_DEBUG
MIME::Lite::TT(3)
TT enabled MIME::Lite wrapper
Modern::Perl(3)
enable all of the features of Modern Perl with one import
Object::Pluggable(3)
A base class for creating plugin-enabled objects
PDF::Builder::Resource::XObject::Image::TIFF::File_GT(3)
support routines for TIFF image library (Graphics::TIFF enabled)
PDF::Builder::Resource::XObject::Image::TIFF_GT(3)
TIFF image support (Graphics::TIFF enabled)
PDL::Perldl2::NiceSlice(3), PDL::Perldl2::Plugin::NiceSlice(3)
enable PDL NiceSlice syntax
POE::Component::Pluggable(3)
A base class for creating plugin-enabled POE Components
Paws::AutoScaling::EnableMetricsCollection(3)
Arguments for method EnableMetricsCollection on Paws::AutoScaling
Paws::CloudWatch::EnableAlarmActions(3)
Arguments for method EnableAlarmActions on Paws::CloudWatch
Paws::CodePipeline::EnableStageTransition(3)
Arguments for method EnableStageTransition on Paws::CodePipeline
Paws::DS::EnableRadius(3)
Arguments for method EnableRadius on Paws::DS
Paws::DS::EnableSso(3)
Arguments for method EnableSso on Paws::DS
Paws::EC2::EnableVgwRoutePropagation(3)
Arguments for method EnableVgwRoutePropagation on Paws::EC2
Paws::EC2::EnableVolumeIO(3)
Arguments for method EnableVolumeIO on Paws::EC2
Paws::EC2::EnableVpcClassicLink(3)
Arguments for method EnableVpcClassicLink on Paws::EC2
Paws::ELB::EnableAvailabilityZonesForLoadBalancer(3)
Arguments for method EnableAvailabilityZonesForLoadBalancer on Paws::ELB
Paws::IAM::EnableMFADevice(3)
Arguments for method EnableMFADevice on Paws::IAM
Paws::KMS::EnableKey(3)
Arguments for method EnableKey on Paws::KMS
Paws::KMS::EnableKeyRotation(3)
Arguments for method EnableKeyRotation on Paws::KMS
Paws::RedShift::EnableLogging(3)
Arguments for method EnableLogging on Paws::RedShift
Paws::RedShift::EnableSnapshotCopy(3)
Arguments for method EnableSnapshotCopy on Paws::RedShift
Paws::Route53Domains::EnableDomainAutoRenew(3)
Arguments for method EnableDomainAutoRenew on Paws::Route53Domains
Paws::Route53Domains::EnableDomainTransferLock(3)
Arguments for method EnableDomainTransferLock on Paws::Route53Domains
Paws::SES::SetIdentityDkimEnabled(3)
Arguments for method SetIdentityDkimEnabled on Paws::SES
Paws::SES::SetIdentityFeedbackForwardingEnabled(3)
Arguments for method SetIdentityFeedbackForwardingEnabled on Paws::SES
Perlbal::Plugin::FlvStreaming(3)
Enable FLV streaming with reverse proxy
Plack::Builder(3)
OO and DSL to enable Plack Middlewares
Plack::Middleware::BufferedStreaming(3)
Enable buffering for non-streaming aware servers
Plack::Middleware::ConditionalGET(3)
Middleware to enable conditional GET
Plack::Middleware::Precompressed(3)
serve pre-gzipped content to compression-enabled clients
Pod::Perldoc::ToMarkdown(3)
Enable `perldoc -o Markdown`
SPOPS::Tie::StrictField(3)
Enable field checking for SPOPS objects
Taint::Runtime(3)
Runtime enable taint checking
Test2::Plugin::DBIProfile(3)
Plugin to enable and display DBI profiling
certbot(1)
certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA (default: False) --preferred-chain PREFERRED_CHAIN If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.17.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key(Only *ONE* per invocation can be provided at this time) (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew all certificates (or more precisely, certificate lineages) you have previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the options used to create obtain or most recently successfully renew each certificate lineage. You can try it with (ga--dry-run(ga first. For more fine-grained control, you can renew individual lineages with the (gacertonly(ga subcommand. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com" (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: True) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
feature(3)
Perl pragma to enable new features
jstatd(1)
Monitors Java Virtual Machines (JVMs) and enables remote monitoring tools to attach to JVMs. This command is experimental and unsupported
kitty.conf(5)
kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2. You can reload the config file within kitty by pressing %ctrl+shift+f5 or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing the %ctrl+shift+f6 key. kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the kitty --config option or use the KITTY_CONFIG_DIRECTORY environment variable. See the kitty --config option for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. For example: 0.0 3.5 C include other.conf P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty list-fonts command. By default they are derived automatically, by the OSes font system. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words "HELLO WORLD" display in kitty as "WORLD HELLO", and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 adjust_line_height, adjust_column_width 0.0 3.5 C adjust_line_height 0 adjust_column_width 0 P Change the size of each character cell kitty renders. You can use either numbers, which are interpreted as pixels or percentages (number followed by %), which are interpreted as percentages of the unmodified values. You can use negative pixels or percentages less than 100% to reduce sizes (but this might cause rendering artifacts). 0.0 adjust_baseline 0.0 3.5 C adjust_baseline 0 P Adjust the vertical alignment of text (the height in the cell at which text is positioned). You can use either numbers, which are interpreted as pixels or a percentages (number followed by %), which are interpreted as the percentage of the line height. A positive value moves the baseline up, and a negative value moves them down. The underline and strikethrough positions are adjusted accordingly. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. symbol_map itself can be specified multiple times. Syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features setting. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code Retina includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code Retina also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %Harfbuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, these are read from the FontConfig database first and then this, setting is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty + list-fonts --psnames: 0.0 3.5 C $ kitty + list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero: 0.0 3.5 C font_features FiraCode-Retina +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P Change the sizes of the lines used for the box drawing unicode characters These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P Choose the color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of (block, beam, underline). Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P Defines the thickness of the beam cursor (in pts) 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P Defines the thickness of the underline cursor (in pts) 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval (in seconds) at which to blink the cursor. Set to zero to disable blinking. Negative values mean use system default. Note that numbers smaller than %repaint_delay will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size, used only for browsing the scrollback buffer (in MB). This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII text, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Modify the amount scrolled by the mouse wheel. Note this is only used for low precision scrolling devices, not for high precision scrolling on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Modify the amount scrolled by a touchpad. Note this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. url_style can be one of: none, single, double, curly 0.0 open_url_with 0.0 3.5 C open_url_with default P The program with which to open URLs that are clicked on. The special value default means to use the operating system(aqs default URL handler. 0.0 url_prefixes 0.0 3.5 C url_prefixes http https file ftp gemini irc gopher mailto news git P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, simply selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selections. You can instead specify a name such as a1 to copy to a private kitty buffer instead. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C map cmd+shift+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the unicode database will be matched. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
notify(3), noted(3), atnotify(3), noteenable(3), notedisable(3), notifyon(3), notifyoff(3)
handle asynchronous process notification
orbd(1)
Enables clients to locate and call persistent objects on servers in the CORBA environment
rmid(1)
Starts the activation system daemon that enables objects to be registered and activated in a Java Virtual Machine (JVM)
set_show_service(1)
enable or disable a service for the current user
sigtrap(3)
Perl pragma to enable simple signal handling
strictures::extra(3)
enable or disable strictures additional checks
tt_feature_enabled(3)
determine if a particular feature has been enabled in this process
utf8(3)
Perl pragma to enable/disable UTF-8 (or UTF-EBCDIC) in source code
home | help